ngram
listlengths 0
9.89k
|
|---|
[
"of the perimeter by a real value, I got slightly",
"was unable to adjust width by dividing the desired value",
"got something about 0.7, but the extrusion width in g-code",
"the \"Perimeter test\" (printed a hallow cube with 1 layer",
"got exactly the thickness I needed. After that, I printed",
"needed. After that, I printed a 15x15x15 mm cube and",
"adjustments using the \"Perimeter test\" (printed a hallow cube with",
"and compared with the perimeter's width from g-code. 4. I",
"number of top and bottom shells equal to 0 (It",
"0.95 only) 5. I have repeated the procedure for many",
"for many times, and always got wrong dimensions and under",
"hallow cube with 1 layer thin perimeter line). I then",
"something about 0.7, but the extrusion width in g-code is",
"this a few times now, and still get the same",
"0.65/0.7 = 0.93 (what is not actually true, because I",
"from the g-code and adjusted the flow rate. I repeated",
"got slightly smaller extrusion multiplier (One I got by division",
"last two weeks I have been struggling with flow rate",
"me one layer thin wall in shape of cube). 3.",
"adjust width by dividing the desired value of the width",
"made in Solidwork 15x15x15 mm cube. 2. The cube was",
"have got with corrected extrusion multiplier](https://i.stack.imgur.com/pcfx5.jpg)](https://i.stack.imgur.com/pcfx5.jpg) Update: I'll try to",
"wrong dimensions and under extrusion. There is the video about",
"only) 5. I have repeated the procedure for many times,",
"shells equal to 1 and number of top and bottom",
"should be). I have done this a few times now,",
"times now, and still get the same result. :/ Furthermore,",
"Slic3r, where I have set the infill to 0% and",
"compared with the perimeter's width from g-code. 4. I have",
"in Solidwork 15x15x15 mm cube. 2. The cube was imported",
"g-code and adjusted the flow rate. I repeated this procedure",
"but 9.5 relates to desired width). Do you have some",
"I got by division is 0.9 , but 9.5 relates",
"imported into Slic3r, where I have set the infill to",
"by division is 0.9 , but 9.5 relates to desired",
"struggling with flow rate adjustments. I'm using an UM2, colorFabb",
"perimeter by a real value, I got slightly smaller extrusion",
"printed it out and measured the width using caliper and",
"slightly smaller extrusion multiplier (One I got by division is",
"than they should be). I have done this a few",
"width using caliper and compared with the perimeter's width from",
"been struggling with flow rate adjustments. I'm using an UM2,",
"I changed extrusion multiplier by 0.65/0.7 = 0.93 (what is",
"of top and bottom shells equal to 0 (It gave",
"layer thin perimeter line). I then compared the desired value",
"the value from the g-code and adjusted the flow rate.",
"two weeks I have been struggling with flow rate adjustments.",
"I printed it out and measured the width using caliper",
"a 15x15x15 mm cube and observed under extrusion on top",
"not actually true, because I got correct value on 0.95",
"until I got exactly the thickness I needed. After that,",
"equal to 0 (It gave me one layer thin wall",
"I repeated this procedure until I got exactly the thickness",
"caliper and compared with the perimeter's width from g-code. 4.",
"top layer. Also, the dimensions of the cube in the",
"is 0.9 , but 9.5 relates to desired width). Do",
"infill to 0% and number of sides shells equal to",
"I have set the infill to 0% and number of",
"of the perimeter's width with the value from the g-code",
"used. 1. I have made in Solidwork 15x15x15 mm cube.",
"Solidwork 15x15x15 mm cube. 2. The cube was imported into",
"some suggestion guys?[](https://i.stack.imgur.com/pcfx5.jpg)",
"I got slightly smaller extrusion multiplier (One I got by",
"15x15x15 mm cube and observed under extrusion on top layer.",
"suggestion guys?[](https://i.stack.imgur.com/pcfx5.jpg) Update:",
"number of sides shells equal to 1 and number of",
"I needed. After that, I printed a 15x15x15 mm cube",
"by a real value, I got slightly smaller extrusion multiplier",
"dimensions and under extrusion. There is the video about method",
"shells equal to 0 (It gave me one layer thin",
"and observed under extrusion on top layer. Also, the dimensions",
"have used. 1. I have made in Solidwork 15x15x15 mm",
"so I changed extrusion multiplier by 0.65/0.7 = 0.93 (what",
"I printed a 15x15x15 mm cube and observed under extrusion",
"cube I made flow rate adjustments using the \"Perimeter test\"",
"gave me one layer thin wall in shape of cube).",
"4. I have got something about 0.7, but the extrusion",
"value of the width of the perimeter by a real",
"test cube I made flow rate adjustments using the \"Perimeter",
"the desired value of the perimeter's width with the value",
"I got correct value on 0.95 only) 5. I have",
"I have got something about 0.7, but the extrusion width",
"have been struggling with flow rate adjustments. I'm using an",
"then compared the desired value of the perimeter's width with",
"(what is not actually true, because I got correct value",
"width of the perimeter by a real value, I got",
"actually true, because I got correct value on 0.95 only)",
"(One I got by division is 0.9 , but 9.5",
"many times, and always got wrong dimensions and under extrusion.",
"layer thin wall in shape of cube). 3. I printed",
"were smaller than expected (0.4mm shorter than they should be).",
"and under extrusion. There is the video about method I",
"0% and number of sides shells equal to 1 and",
"multiplier](https://i.stack.imgur.com/pcfx5.jpg)](https://i.stack.imgur.com/pcfx5.jpg) Update: I'll try to explain the calibration method I",
"into Slic3r, where I have set the infill to 0%",
"extrusion multiplier](https://i.stack.imgur.com/pcfx5.jpg)](https://i.stack.imgur.com/pcfx5.jpg) Update: I'll try to explain the calibration method",
"of cube). 3. I printed it out and measured the",
"that, I printed a 15x15x15 mm cube and observed under",
"extrusion. There is the video about method I just have",
"and bottom shells equal to 0 (It gave me one",
"shape of cube). 3. I printed it out and measured",
"rate adjustments using the \"Perimeter test\" (printed a hallow cube",
"I then compared the desired value of the perimeter's width",
"3. I printed it out and measured the width using",
"(0.4mm shorter than they should be). I have done this",
"1.75mm and Slic3r. Before printing a test cube I made",
"of the width of the perimeter by a real value,",
"flow rate. I repeated this procedure until I got exactly",
"and always got wrong dimensions and under extrusion. There is",
"wall in shape of cube). 3. I printed it out",
"value from the g-code and adjusted the flow rate. I",
"smaller than expected (0.4mm shorter than they should be). I",
"with corrected extrusion multiplier](https://i.stack.imgur.com/pcfx5.jpg)](https://i.stack.imgur.com/pcfx5.jpg) Update: I'll try to explain the",
"have repeated the procedure for many times, and always got",
"got with corrected extrusion multiplier](https://i.stack.imgur.com/pcfx5.jpg)](https://i.stack.imgur.com/pcfx5.jpg) Update: I'll try to explain",
"x-y plane were smaller than expected (0.4mm shorter than they",
"to desired width). Do you have some suggestion guys?[](https://i.stack.imgur.com/pcfx5.jpg) Update: I'll try",
"is not actually true, because I got correct value on",
"in g-code is 0.65, so I changed extrusion multiplier by",
"exactly the thickness I needed. After that, I printed a",
"an UM2, colorFabb XT 1.75mm and Slic3r. Before printing a",
"using an UM2, colorFabb XT 1.75mm and Slic3r. Before printing",
"to 0 (It gave me one layer thin wall in",
"corrected extrusion multiplier](https://i.stack.imgur.com/pcfx5.jpg)](https://i.stack.imgur.com/pcfx5.jpg) Update: I'll try to explain the calibration",
"The cube was imported into Slic3r, where I have set",
"using the \"Perimeter test\" (printed a hallow cube with 1",
"division is 0.9 , but 9.5 relates to desired width).",
"always got wrong dimensions and under extrusion. There is the",
"got by division is 0.9 , but 9.5 relates to",
"dimensions of the cube in the x-y plane were smaller",
"a hallow cube with 1 layer thin perimeter line). I",
"you have some suggestion guys?[](https://i.stack.imgur.com/pcfx5.jpg) Update: I'll",
"cube in the x-y plane were smaller than expected (0.4mm",
"I got exactly the thickness I needed. After that, I",
"colorFabb XT 1.75mm and Slic3r. Before printing a test cube",
"the width using caliper and compared with the perimeter's width",
"have got something about 0.7, but the extrusion width in",
"result. :/ Furthermore, I was unable to adjust width by",
"with the perimeter's width from g-code. 4. I have got",
"got correct value on 0.95 only) 5. I have repeated",
"perimeter line). I then compared the desired value of the",
"and measured the width using caliper and compared with the"
] |
[
"printing altogether. If I switch back to the user that",
"is there any way to get it to run properly",
"there any way to get it to run properly under",
"resumes. Before I updated Repetier Host this didn't happen, I",
"would run just fine. I'm not sure why this behaviour",
"running Repetier Host v1.6.1 with Repetier Firmware v0.92.9. My computer",
"Host then the buffer fills up again and the print",
"command buffer drops from 16 to 0 until it stops",
"print job resumes. Before I updated Repetier Host this didn't",
"buffer drops from 16 to 0 until it stops printing",
"has changed, but is there any way to get it",
"switch back to the user that is running Repetier Host",
"run just fine. I'm not sure why this behaviour has",
"display shows that the command buffer drops from 16 to",
"could leave it running while I switched users and the",
"to get it to run properly under a background user?",
"the job would run just fine. I'm not sure why",
"If I switch back to the user that is running",
"that is running Repetier Host then the buffer fills up",
"then the pinter's display shows that the command buffer drops",
"set a print going via USB then switch to another",
"I do not log out), then the pinter's display shows",
"Repetier Host then the buffer fills up again and the",
"until it stops printing altogether. If I switch back to",
"Windows 7 Pro SP1, 64-bit. If I set a print",
"then the buffer fills up again and the print job",
"it running while I switched users and the job would",
"stops printing altogether. If I switch back to the user",
"Repetier Firmware v0.92.9. My computer is running Windows 7 Pro",
"sure why this behaviour has changed, but is there any",
"Before I updated Repetier Host this didn't happen, I could",
"the user that is running Repetier Host then the buffer",
"altogether. If I switch back to the user that is",
"back to the user that is running Repetier Host then",
"that the command buffer drops from 16 to 0 until",
"v0.92.9. My computer is running Windows 7 Pro SP1, 64-bit.",
"to another user (note: I do not log out), then",
"this behaviour has changed, but is there any way to",
"fine. I'm not sure why this behaviour has changed, but",
"v1.6.1 with Repetier Firmware v0.92.9. My computer is running Windows",
"Firmware v0.92.9. My computer is running Windows 7 Pro SP1,",
"Pro SP1, 64-bit. If I set a print going via",
"another user (note: I do not log out), then the",
"fills up again and the print job resumes. Before I",
"updated Repetier Host this didn't happen, I could leave it",
"the buffer fills up again and the print job resumes.",
"Host v1.6.1 with Repetier Firmware v0.92.9. My computer is running",
"user that is running Repetier Host then the buffer fills",
"user (note: I do not log out), then the pinter's",
"to the user that is running Repetier Host then the",
"from 16 to 0 until it stops printing altogether. If",
"up again and the print job resumes. Before I updated",
"log out), then the pinter's display shows that the command",
"switch to another user (note: I do not log out),",
"just fine. I'm not sure why this behaviour has changed,",
"but is there any way to get it to run",
"changed, but is there any way to get it to",
"not sure why this behaviour has changed, but is there",
"I could leave it running while I switched users and",
"job resumes. Before I updated Repetier Host this didn't happen,",
"I'm not sure why this behaviour has changed, but is",
"I updated Repetier Host this didn't happen, I could leave",
"computer is running Windows 7 Pro SP1, 64-bit. If I",
"16 to 0 until it stops printing altogether. If I",
"then switch to another user (note: I do not log",
"this didn't happen, I could leave it running while I",
"Host this didn't happen, I could leave it running while",
"out), then the pinter's display shows that the command buffer",
"My computer is running Windows 7 Pro SP1, 64-bit. If",
"drops from 16 to 0 until it stops printing altogether.",
"SP1, 64-bit. If I set a print going via USB",
"I switch back to the user that is running Repetier",
"(note: I do not log out), then the pinter's display",
"why this behaviour has changed, but is there any way",
"running while I switched users and the job would run",
"print going via USB then switch to another user (note:",
"didn't happen, I could leave it running while I switched",
"going via USB then switch to another user (note: I",
"is running Repetier Host then the buffer fills up again",
"and the print job resumes. Before I updated Repetier Host",
"a print going via USB then switch to another user",
"0 until it stops printing altogether. If I switch back",
"the command buffer drops from 16 to 0 until it",
"64-bit. If I set a print going via USB then",
"7 Pro SP1, 64-bit. If I set a print going",
"USB then switch to another user (note: I do not",
"leave it running while I switched users and the job",
"switched users and the job would run just fine. I'm",
"with Repetier Firmware v0.92.9. My computer is running Windows 7",
"while I switched users and the job would run just",
"not log out), then the pinter's display shows that the",
"and the job would run just fine. I'm not sure",
"pinter's display shows that the command buffer drops from 16",
"to 0 until it stops printing altogether. If I switch",
"the pinter's display shows that the command buffer drops from",
"If I set a print going via USB then switch",
"Repetier Host this didn't happen, I could leave it running",
"behaviour has changed, but is there any way to get",
"way to get it to run properly under a background",
"I switched users and the job would run just fine.",
"job would run just fine. I'm not sure why this",
"any way to get it to run properly under a",
"shows that the command buffer drops from 16 to 0",
"the print job resumes. Before I updated Repetier Host this",
"I set a print going via USB then switch to",
"users and the job would run just fine. I'm not",
"via USB then switch to another user (note: I do",
"is running Windows 7 Pro SP1, 64-bit. If I set",
"do not log out), then the pinter's display shows that",
"happen, I could leave it running while I switched users",
"buffer fills up again and the print job resumes. Before",
"it stops printing altogether. If I switch back to the",
"I'm running Repetier Host v1.6.1 with Repetier Firmware v0.92.9. My",
"Repetier Host v1.6.1 with Repetier Firmware v0.92.9. My computer is",
"again and the print job resumes. Before I updated Repetier",
"running Repetier Host then the buffer fills up again and",
"running Windows 7 Pro SP1, 64-bit. If I set a"
] |
[
"attempting to construct model tank tracks with accompanying wheels and",
"I am attempting to construct model tank tracks with accompanying",
"grease for this project to minimize friction without damaging the",
"be a suitable grease for this project to minimize friction",
"be printed in PLA. The tracks will be driven by",
"accompanying wheels and sprockets. All parts will be printed in",
"construct model tank tracks with accompanying wheels and sprockets. All",
"wheels and sprockets. All parts will be printed in PLA.",
"tracks with accompanying wheels and sprockets. All parts will be",
"model tank tracks with accompanying wheels and sprockets. All parts",
"tracks will be driven by electric motors. What would be",
"PLA. The tracks will be driven by electric motors. What",
"suitable grease for this project to minimize friction without damaging",
"to construct model tank tracks with accompanying wheels and sprockets.",
"motors. What would be a suitable grease for this project",
"with accompanying wheels and sprockets. All parts will be printed",
"would be a suitable grease for this project to minimize",
"am attempting to construct model tank tracks with accompanying wheels",
"a suitable grease for this project to minimize friction without",
"in PLA. The tracks will be driven by electric motors.",
"and sprockets. All parts will be printed in PLA. The",
"tank tracks with accompanying wheels and sprockets. All parts will",
"What would be a suitable grease for this project to",
"will be printed in PLA. The tracks will be driven",
"The tracks will be driven by electric motors. What would",
"sprockets. All parts will be printed in PLA. The tracks",
"All parts will be printed in PLA. The tracks will",
"electric motors. What would be a suitable grease for this",
"be driven by electric motors. What would be a suitable",
"parts will be printed in PLA. The tracks will be",
"will be driven by electric motors. What would be a",
"driven by electric motors. What would be a suitable grease",
"for this project to minimize friction without damaging the plastics.",
"by electric motors. What would be a suitable grease for",
"printed in PLA. The tracks will be driven by electric"
] |
[
"and Pronterface SW. I didn't find answer in following troubleshooting",
"SW. I didn't find answer in following troubleshooting guides: *",
"(And Solutions)](https://all3dp.com/common-3d-printing-problems-and-their-solutions) Do you have an idea what can cause",
"have problems with slowly printed parts. After I print first",
"were extruded around 10mm/s, the right one around 15mm/s. The",
"Printing Problems (And Solutions)](https://all3dp.com/common-3d-printing-problems-and-their-solutions) Do you have an idea what",
"issue. [](https://i.stack.imgur.com/wSSm4.jpg) The first two test were",
"Solutions)](https://all3dp.com/common-3d-printing-problems-and-their-solutions) Do you have an idea what can cause this",
"Guide](http://reprap.org/wiki/Print_Troubleshooting_Pictorial_Guide) * [all3dp.com - 16 Common 3D Printing Problems (And",
"around 10mm/s, the right one around 15mm/s. The material is",
"Rebel II RepRap printer uses RAMPS with marlin firmware. I",
"use Slic3r and Pronterface SW. I didn't find answer in",
"didn't find answer in following troubleshooting guides: * [Simplify3D -",
"you have an idea what can cause this issue? Update",
"slowly printed parts. After I print first object and start",
"[Simplify3D - Print Quality Troubleshooting Guide](https://www.simplify3d.com/support/print-quality-troubleshooting/) * [A visual Ultimaker",
"printing immediately. This is the result: [](https://i.stack.imgur.com/Tqugj.jpg)",
"uses RAMPS with marlin firmware. I use Slic3r and Pronterface",
"find answer in following troubleshooting guides: * [Simplify3D - Print",
"Problems (And Solutions)](https://all3dp.com/common-3d-printing-problems-and-their-solutions) Do you have an idea what can",
"in following troubleshooting guides: * [Simplify3D - Print Quality Troubleshooting",
"RepRap printer uses RAMPS with marlin firmware. I use Slic3r",
"first object and start next one, then the first layer",
"to a E3D full hotend and I started to have",
"- Print Troubleshooting Pictorial Guide](http://reprap.org/wiki/Print_Troubleshooting_Pictorial_Guide) * [all3dp.com - 16 Common",
"- Print Quality Troubleshooting Guide](https://www.simplify3d.com/support/print-quality-troubleshooting/) * [A visual Ultimaker troubleshooting",
"at temperature 210°C and nozzle diameter is 0.4mm. The Rebel",
"a E3D full hotend and I started to have problems",
"can cause this issue? Update ------ I did a new",
"10mm/s, the right one around 15mm/s. The material is PLA",
"and I started to have problems with slowly printed parts.",
"troubleshooting guides: * [Simplify3D - Print Quality Troubleshooting Guide](https://www.simplify3d.com/support/print-quality-troubleshooting/) *",
"0.4mm. The Rebel II RepRap printer uses RAMPS with marlin",
"and start next one, then the first layer has serious",
"Troubleshooting Guide](https://www.simplify3d.com/support/print-quality-troubleshooting/) * [A visual Ultimaker troubleshooting guide](http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide) * [RepRap",
"extruded around 10mm/s, the right one around 15mm/s. The material",
"started to have problems with slowly printed parts. After I",
"a new print, where I just heat the hotend and",
"Slic3r and Pronterface SW. I didn't find answer in following",
"test were extruded around 10mm/s, the right one around 15mm/s.",
"and start printing immediately. This is the result: [](https://i.stack.imgur.com/wSSm4.jpg) The first two test were extruded",
"material is PLA (fillamentum.com) at temperature 210°C and nozzle diameter",
"Common 3D Printing Problems (And Solutions)](https://all3dp.com/common-3d-printing-problems-and-their-solutions) Do you have an",
"I did a new print, where I just heat the",
"I just heat the hotend and start printing immediately. This",
"is PLA (fillamentum.com) at temperature 210°C and nozzle diameter is",
"After I print first object and start next one, then",
"first two test were extruded around 10mm/s, the right one",
"I didn't find answer in following troubleshooting guides: * [Simplify3D",
"Update ------ I did a new print, where I just",
"problems with slowly printed parts. After I print first object",
"Print Troubleshooting Pictorial Guide](http://reprap.org/wiki/Print_Troubleshooting_Pictorial_Guide) * [all3dp.com - 16 Common 3D",
"issue? Update ------ I did a new print, where I",
"Pronterface SW. I didn't find answer in following troubleshooting guides:",
"The Rebel II RepRap printer uses RAMPS with marlin firmware.",
"* [Simplify3D - Print Quality Troubleshooting Guide](https://www.simplify3d.com/support/print-quality-troubleshooting/) * [A visual",
"did a new print, where I just heat the hotend",
"the hotend and start printing immediately. This is the result:",
"diameter is 0.4mm. The Rebel II RepRap printer uses RAMPS",
"* [A visual Ultimaker troubleshooting guide](http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide) * [RepRap - Print",
"Quality Troubleshooting Guide](https://www.simplify3d.com/support/print-quality-troubleshooting/) * [A visual Ultimaker troubleshooting guide](http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide) *",
"what can cause this issue? Update ------ I did a",
"(fillamentum.com) at temperature 210°C and nozzle diameter is 0.4mm. The",
"------ I did a new print, where I just heat",
"Guide](https://www.simplify3d.com/support/print-quality-troubleshooting/) * [A visual Ultimaker troubleshooting guide](http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide) * [RepRap -",
"printer uses RAMPS with marlin firmware. I use Slic3r and",
"new print, where I just heat the hotend and start",
"start next one, then the first layer has serious issue.",
"[all3dp.com - 16 Common 3D Printing Problems (And Solutions)](https://all3dp.com/common-3d-printing-problems-and-their-solutions) Do",
"parts. After I print first object and start next one,",
"description here](https://i.stack.imgur.com/wSSm4.jpg)](https://i.stack.imgur.com/wSSm4.jpg) The first two test were extruded around 10mm/s,",
"one, then the first layer has serious issue. [ * [RepRap - Print Troubleshooting Pictorial",
"print, where I just heat the hotend and start printing",
"guide](http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide) * [RepRap - Print Troubleshooting Pictorial Guide](http://reprap.org/wiki/Print_Troubleshooting_Pictorial_Guide) * [all3dp.com",
"cause this issue? Update ------ I did a new print,",
"Ultimaker troubleshooting guide](http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide) * [RepRap - Print Troubleshooting Pictorial Guide](http://reprap.org/wiki/Print_Troubleshooting_Pictorial_Guide)",
"following troubleshooting guides: * [Simplify3D - Print Quality Troubleshooting Guide](https://www.simplify3d.com/support/print-quality-troubleshooting/)",
"troubleshooting guide](http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide) * [RepRap - Print Troubleshooting Pictorial Guide](http://reprap.org/wiki/Print_Troubleshooting_Pictorial_Guide) *",
"The material is PLA (fillamentum.com) at temperature 210°C and nozzle",
"where I just heat the hotend and start printing immediately.",
"* [all3dp.com - 16 Common 3D Printing Problems (And Solutions)](https://all3dp.com/common-3d-printing-problems-and-their-solutions)",
"to have problems with slowly printed parts. After I print",
"one around 15mm/s. The material is PLA (fillamentum.com) at temperature",
"print first object and start next one, then the first",
"just heat the hotend and start printing immediately. This is",
"the first layer has serious issue. [](https://i.stack.imgur.com/wSSm4.jpg)",
"[A visual Ultimaker troubleshooting guide](http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide) * [RepRap - Print Troubleshooting",
"3D Printing Problems (And Solutions)](https://all3dp.com/common-3d-printing-problems-and-their-solutions) Do you have an idea",
"serious issue. [](https://i.stack.imgur.com/wSSm4.jpg) The first two test",
"I started to have problems with slowly printed parts. After",
"idea what can cause this issue? Update ------ I did",
"* [RepRap - Print Troubleshooting Pictorial Guide](http://reprap.org/wiki/Print_Troubleshooting_Pictorial_Guide) * [all3dp.com -",
"PLA (fillamentum.com) at temperature 210°C and nozzle diameter is 0.4mm.",
"right one around 15mm/s. The material is PLA (fillamentum.com) at",
"and nozzle diameter is 0.4mm. The Rebel II RepRap printer",
"heat the hotend and start printing immediately. This is the",
"with slowly printed parts. After I print first object and",
"guides: * [Simplify3D - Print Quality Troubleshooting Guide](https://www.simplify3d.com/support/print-quality-troubleshooting/) * [A",
"Pictorial Guide](http://reprap.org/wiki/Print_Troubleshooting_Pictorial_Guide) * [all3dp.com - 16 Common 3D Printing Problems",
"image description here](https://i.stack.imgur.com/wSSm4.jpg)](https://i.stack.imgur.com/wSSm4.jpg) The first two test were extruded around",
"this issue? Update ------ I did a new print, where",
"temperature 210°C and nozzle diameter is 0.4mm. The Rebel II",
"[RepRap - Print Troubleshooting Pictorial Guide](http://reprap.org/wiki/Print_Troubleshooting_Pictorial_Guide) * [all3dp.com - 16",
"firmware. I use Slic3r and Pronterface SW. I didn't find",
"Print Quality Troubleshooting Guide](https://www.simplify3d.com/support/print-quality-troubleshooting/) * [A visual Ultimaker troubleshooting guide](http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide)",
"- 16 Common 3D Printing Problems (And Solutions)](https://all3dp.com/common-3d-printing-problems-and-their-solutions) Do you",
"here](https://i.stack.imgur.com/wSSm4.jpg)](https://i.stack.imgur.com/wSSm4.jpg) The first two test were extruded around 10mm/s, the",
"210°C and nozzle diameter is 0.4mm. The Rebel II RepRap",
"Do you have an idea what can cause this issue?",
"nozzle diameter is 0.4mm. The Rebel II RepRap printer uses",
"first layer has serious issue. [](https://i.stack.imgur.com/wSSm4.jpg) The",
"the right one around 15mm/s. The material is PLA (fillamentum.com)",
"answer in following troubleshooting guides: * [Simplify3D - Print Quality",
"next one, then the first layer has serious issue. [](https://i.stack.imgur.com/wSSm4.jpg) The first",
"around 15mm/s. The material is PLA (fillamentum.com) at temperature 210°C",
"an idea what can cause this issue? Update ------ I",
"hotend and I started to have problems with slowly printed",
"The first two test were extruded around 10mm/s, the right",
"has serious issue. [](https://i.stack.imgur.com/wSSm4.jpg) The first two",
"two test were extruded around 10mm/s, the right one around",
"is 0.4mm. The Rebel II RepRap printer uses RAMPS with",
"then the first layer has serious issue. [ * [all3dp.com - 16 Common 3D Printing",
"printed parts. After I print first object and start next",
"I recently upgraded to a E3D full hotend and I",
"I print first object and start next one, then the",
"16 Common 3D Printing Problems (And Solutions)](https://all3dp.com/common-3d-printing-problems-and-their-solutions) Do you have",
"start printing immediately. This is the result: [![enter image description",
"have an idea what can cause this issue? Update ------",
"RAMPS with marlin firmware. I use Slic3r and Pronterface SW.",
"marlin firmware. I use Slic3r and Pronterface SW. I didn't",
"hotend and start printing immediately. This is the result: [![enter",
"full hotend and I started to have problems with slowly",
"II RepRap printer uses RAMPS with marlin firmware. I use"
] |
[
"the raft off of my ABS prints. Is that a",
"heated to 100˚C and nozzle is either 266˚C for UP",
"been having a hard time lately getting the raft off",
"symptom of either a nozzle or bed that are too",
"are too hot? Or is there some other factor I",
"I've modified both the nozzle and bed to customize the",
"the nozzle and bed to customize the temperatures on. Bed",
"factor I should be looking in to? I have an",
"modified both the nozzle and bed to customize the temperatures",
"having a hard time lately getting the raft off of",
"on. Bed gets heated to 100˚C and nozzle is either",
"gets heated to 100˚C and nozzle is either 266˚C for",
"nozzle or bed that are too hot? Or is there",
"for UP ABS filament or 236˚C for off-brand ABS filament.",
"a hard time lately getting the raft off of my",
"hard time lately getting the raft off of my ABS",
"I've been having a hard time lately getting the raft",
"hot? Or is there some other factor I should be",
"mini that I've modified both the nozzle and bed to",
"lately getting the raft off of my ABS prints. Is",
"should be looking in to? I have an UP mini",
"nozzle is either 266˚C for UP ABS filament or 236˚C",
"my ABS prints. Is that a symptom of either a",
"of either a nozzle or bed that are too hot?",
"time lately getting the raft off of my ABS prints.",
"an UP mini that I've modified both the nozzle and",
"that a symptom of either a nozzle or bed that",
"have an UP mini that I've modified both the nozzle",
"nozzle and bed to customize the temperatures on. Bed gets",
"and nozzle is either 266˚C for UP ABS filament or",
"a symptom of either a nozzle or bed that are",
"Is that a symptom of either a nozzle or bed",
"and bed to customize the temperatures on. Bed gets heated",
"of my ABS prints. Is that a symptom of either",
"that are too hot? Or is there some other factor",
"to customize the temperatures on. Bed gets heated to 100˚C",
"UP mini that I've modified both the nozzle and bed",
"raft off of my ABS prints. Is that a symptom",
"some other factor I should be looking in to? I",
"be looking in to? I have an UP mini that",
"or bed that are too hot? Or is there some",
"prints. Is that a symptom of either a nozzle or",
"there some other factor I should be looking in to?",
"temperatures on. Bed gets heated to 100˚C and nozzle is",
"100˚C and nozzle is either 266˚C for UP ABS filament",
"a nozzle or bed that are too hot? Or is",
"too hot? Or is there some other factor I should",
"ABS prints. Is that a symptom of either a nozzle",
"either 266˚C for UP ABS filament or 236˚C for off-brand",
"266˚C for UP ABS filament or 236˚C for off-brand ABS",
"Or is there some other factor I should be looking",
"Bed gets heated to 100˚C and nozzle is either 266˚C",
"customize the temperatures on. Bed gets heated to 100˚C and",
"getting the raft off of my ABS prints. Is that",
"other factor I should be looking in to? I have",
"looking in to? I have an UP mini that I've",
"in to? I have an UP mini that I've modified",
"to? I have an UP mini that I've modified both",
"bed to customize the temperatures on. Bed gets heated to",
"I should be looking in to? I have an UP",
"off of my ABS prints. Is that a symptom of",
"I have an UP mini that I've modified both the",
"that I've modified both the nozzle and bed to customize",
"is there some other factor I should be looking in",
"both the nozzle and bed to customize the temperatures on.",
"to 100˚C and nozzle is either 266˚C for UP ABS",
"bed that are too hot? Or is there some other",
"the temperatures on. Bed gets heated to 100˚C and nozzle",
"either a nozzle or bed that are too hot? Or",
"is either 266˚C for UP ABS filament or 236˚C for"
] |
[
"from a heatbed is described](http://bukobot.com/hot-end-thermal-management), however without giving quantitative results.",
"people's reports, from 'almost negligible' as insulator (but helpful for",
"here](http://numbersixreprap.blogspot.fr/2013/10/does-insulating-heater-block-make.html) with a very conclusive resumee about its usefulness. In",
"quantitative results. Additionally, I know that in the guys over",
"the named article, [a method with insulating material from a",
"material from a heatbed is described](http://bukobot.com/hot-end-thermal-management), however without giving quantitative",
"heat block of the hotend. I have seen [Kapton tape",
"I understand there is a large spread between people's reports,",
"the links of the named article, [a method with insulating",
"very useful. No quantification, though. Also, these seem to come",
"easiest ways of thermally insulating the heat block of the",
"to very useful. No quantification, though. Also, these seem to",
"without giving quantitative results. Additionally, I know that in the",
"over in the german reprap forum produce their own [silicon",
"insulating the heat block of the hotend. I have seen",
"useful. No quantification, though. Also, these seem to come with",
"discuss the most efficient and also the easiest ways of",
"wanted to discuss the most efficient and also the easiest",
"ways of thermally insulating the heat block of the hotend.",
"giving quantitative results. Additionally, I know that in the guys",
"thermally insulating the heat block of the hotend. I have",
"in the german reprap forum produce their own [silicon covers",
"named article, [a method with insulating material from a heatbed",
"understand there is a large spread between people's reports, from",
"things) to very useful. No quantification, though. Also, these seem",
"effort to produce. Are there additional solutions and/or comparisons between",
"conclusive resumee about its usefulness. In the links of the",
"seem to come with a certain amount of effort to",
"these seem to come with a certain amount of effort",
"the german reprap forum produce their own [silicon covers for",
"as insulator (but helpful for other things) to very useful.",
"large spread between people's reports, from 'almost negligible' as insulator",
"by [this question](https://3dprinting.stackexchange.com/questions/1245/running-12v-on-a-24v-heater-cartridge), I wanted to discuss the most efficient",
"to come with a certain amount of effort to produce.",
"efficient and also the easiest ways of thermally insulating the",
"there is a large spread between people's reports, from 'almost",
"insulator (but helpful for other things) to very useful. No",
"heatbed is described](http://bukobot.com/hot-end-thermal-management), however without giving quantitative results. Additionally, I",
"also the easiest ways of thermally insulating the heat block",
"though. Also, these seem to come with a certain amount",
"links of the named article, [a method with insulating material",
"method with insulating material from a heatbed is described](http://bukobot.com/hot-end-thermal-management), however",
"hotend. I have seen [Kapton tape insulations as done here](http://numbersixreprap.blogspot.fr/2013/10/does-insulating-heater-block-make.html)",
"I know that in the guys over in the german",
"reports, from 'almost negligible' as insulator (but helpful for other",
"is described](http://bukobot.com/hot-end-thermal-management), however without giving quantitative results. Additionally, I know",
"and also the easiest ways of thermally insulating the heat",
"Sparked by [this question](https://3dprinting.stackexchange.com/questions/1245/running-12v-on-a-24v-heater-cartridge), I wanted to discuss the most",
"[this question](https://3dprinting.stackexchange.com/questions/1245/running-12v-on-a-24v-heater-cartridge), I wanted to discuss the most efficient and",
"own [silicon covers for the heater block](http://forums.reprap.org/read.php?252,584458). As I understand",
"insulations as done here](http://numbersixreprap.blogspot.fr/2013/10/does-insulating-heater-block-make.html) with a very conclusive resumee about",
"between people's reports, from 'almost negligible' as insulator (but helpful",
"a heatbed is described](http://bukobot.com/hot-end-thermal-management), however without giving quantitative results. Additionally,",
"I wanted to discuss the most efficient and also the",
"very conclusive resumee about its usefulness. In the links of",
"other things) to very useful. No quantification, though. Also, these",
"insulating material from a heatbed is described](http://bukobot.com/hot-end-thermal-management), however without giving",
"in the guys over in the german reprap forum produce",
"[Kapton tape insulations as done here](http://numbersixreprap.blogspot.fr/2013/10/does-insulating-heater-block-make.html) with a very conclusive",
"covers for the heater block](http://forums.reprap.org/read.php?252,584458). As I understand there is",
"block of the hotend. I have seen [Kapton tape insulations",
"'almost negligible' as insulator (but helpful for other things) to",
"I have seen [Kapton tape insulations as done here](http://numbersixreprap.blogspot.fr/2013/10/does-insulating-heater-block-make.html) with",
"their own [silicon covers for the heater block](http://forums.reprap.org/read.php?252,584458). As I",
"certain amount of effort to produce. Are there additional solutions",
"article, [a method with insulating material from a heatbed is",
"block](http://forums.reprap.org/read.php?252,584458). As I understand there is a large spread between",
"that in the guys over in the german reprap forum",
"of the hotend. I have seen [Kapton tape insulations as",
"As I understand there is a large spread between people's",
"however without giving quantitative results. Additionally, I know that in",
"for the heater block](http://forums.reprap.org/read.php?252,584458). As I understand there is a",
"helpful for other things) to very useful. No quantification, though.",
"with insulating material from a heatbed is described](http://bukobot.com/hot-end-thermal-management), however without",
"with a very conclusive resumee about its usefulness. In the",
"tape insulations as done here](http://numbersixreprap.blogspot.fr/2013/10/does-insulating-heater-block-make.html) with a very conclusive resumee",
"know that in the guys over in the german reprap",
"spread between people's reports, from 'almost negligible' as insulator (but",
"heater block](http://forums.reprap.org/read.php?252,584458). As I understand there is a large spread",
"question](https://3dprinting.stackexchange.com/questions/1245/running-12v-on-a-24v-heater-cartridge), I wanted to discuss the most efficient and also",
"its usefulness. In the links of the named article, [a",
"produce their own [silicon covers for the heater block](http://forums.reprap.org/read.php?252,584458). As",
"forum produce their own [silicon covers for the heater block](http://forums.reprap.org/read.php?252,584458).",
"german reprap forum produce their own [silicon covers for the",
"the heater block](http://forums.reprap.org/read.php?252,584458). As I understand there is a large",
"In the links of the named article, [a method with",
"of thermally insulating the heat block of the hotend. I",
"a very conclusive resumee about its usefulness. In the links",
"[a method with insulating material from a heatbed is described](http://bukobot.com/hot-end-thermal-management),",
"described](http://bukobot.com/hot-end-thermal-management), however without giving quantitative results. Additionally, I know that",
"is a large spread between people's reports, from 'almost negligible'",
"resumee about its usefulness. In the links of the named",
"the hotend. I have seen [Kapton tape insulations as done",
"for other things) to very useful. No quantification, though. Also,",
"[silicon covers for the heater block](http://forums.reprap.org/read.php?252,584458). As I understand there",
"quantification, though. Also, these seem to come with a certain",
"reprap forum produce their own [silicon covers for the heater",
"about its usefulness. In the links of the named article,",
"done here](http://numbersixreprap.blogspot.fr/2013/10/does-insulating-heater-block-make.html) with a very conclusive resumee about its usefulness.",
"No quantification, though. Also, these seem to come with a",
"seen [Kapton tape insulations as done here](http://numbersixreprap.blogspot.fr/2013/10/does-insulating-heater-block-make.html) with a very",
"guys over in the german reprap forum produce their own",
"the most efficient and also the easiest ways of thermally",
"the heat block of the hotend. I have seen [Kapton",
"to discuss the most efficient and also the easiest ways",
"Also, these seem to come with a certain amount of",
"have seen [Kapton tape insulations as done here](http://numbersixreprap.blogspot.fr/2013/10/does-insulating-heater-block-make.html) with a",
"negligible' as insulator (but helpful for other things) to very",
"(but helpful for other things) to very useful. No quantification,",
"Additionally, I know that in the guys over in the",
"the guys over in the german reprap forum produce their",
"the easiest ways of thermally insulating the heat block of",
"come with a certain amount of effort to produce. Are",
"amount of effort to produce. Are there additional solutions and/or",
"to produce. Are there additional solutions and/or comparisons between solutions?",
"with a certain amount of effort to produce. Are there",
"from 'almost negligible' as insulator (but helpful for other things)",
"a certain amount of effort to produce. Are there additional",
"of effort to produce. Are there additional solutions and/or comparisons",
"usefulness. In the links of the named article, [a method",
"most efficient and also the easiest ways of thermally insulating",
"of the named article, [a method with insulating material from",
"results. Additionally, I know that in the guys over in",
"as done here](http://numbersixreprap.blogspot.fr/2013/10/does-insulating-heater-block-make.html) with a very conclusive resumee about its",
"a large spread between people's reports, from 'almost negligible' as"
] |
[
"form of a lookup table, or similar. The second and",
"printer, the filament, the model and other slicer settings. For",
"too high? An answer to the first question could take",
"following questions: 1. Which known factors before a print can",
"table, or similar. The second and third could help someone",
"based on the symptoms of a failed print. *I understand",
"around 205ºC for PLA and around 240ºC for ABS. But",
"or after a print when the temperature is too high?",
"on (at least) the following questions: 1. Which known factors",
"success of a print can depend on many more factors",
"temperature is too high? An answer to the first question",
"guidelines, of course. Optimal printing temperature can be different depending",
"print. *I understand that the failure or success of a",
"that the failure or success of a print can depend",
"can be different depending on the printer, the filament, the",
"but silver PLA of the same brand is giving me",
"would like to see a general guide for this, based",
"too low? 3. What can happen during or after a",
"let me know if this question should be expanded or",
"know if this question should be expanded or improved to",
"their temperature based on the symptoms of a failed print.",
"*I understand that the failure or success of a print",
"different depending on the printer, the filament, the model and",
"should be expanded or improved to make it more useful.*",
"for this, based on (at least) the following questions: 1.",
"vs PLA 2. What can happen during or after a",
"extrusion temperature, but I didn't want to make this question",
"other slicer settings. For example, I've had success printing black",
"speed). However, do let me know if this question should",
"what I've been able to find out, online sources recommend",
"guide for this, based on (at least) the following questions:",
"after a print when the temperature is too low? 3.",
"What can happen during or after a print when the",
"similar. The second and third could help someone adjust their",
"to make this question too general. I may later ask",
"the printer, the filament, the model and other slicer settings.",
"question could take the form of a lookup table, or",
"to find out, online sources recommend around 205ºC for PLA",
"lookup table, or similar. The second and third could help",
"help someone adjust their temperature based on the symptoms of",
"extrusion temperature? Obvious example: ABS vs PLA 2. What can",
"the symptoms of a failed print. *I understand that the",
"brand is giving me trouble. I'm having a hard time",
"the form of a lookup table, or similar. The second",
"sources recommend around 205ºC for PLA and around 240ºC for",
"ABS. But these are only guidelines, of course. Optimal printing",
"same brand is giving me trouble. I'm having a hard",
"these are only guidelines, of course. Optimal printing temperature can",
"model and other slicer settings. For example, I've had success",
"a lookup table, or similar. The second and third could",
"ABS vs PLA 2. What can happen during or after",
"of course. Optimal printing temperature can be different depending on",
"low? 3. What can happen during or after a print",
"depending on the printer, the filament, the model and other",
"more factors than extrusion temperature, but I didn't want to",
"general rules. So I would like to see a general",
"understand that the failure or success of a print can",
"However, do let me know if this question should be",
"the following questions: 1. Which known factors before a print",
"only guidelines, of course. Optimal printing temperature can be different",
"example: ABS vs PLA 2. What can happen during or",
"adjust their temperature based on the symptoms of a failed",
"Obvious example: ABS vs PLA 2. What can happen during",
"for PLA and around 240ºC for ABS. But these are",
"on many more factors than extrusion temperature, but I didn't",
"the right extrusion temperature? Obvious example: ABS vs PLA 2.",
"failure or success of a print can depend on many",
"take the form of a lookup table, or similar. The",
"could help someone adjust their temperature based on the symptoms",
"For example, I've had success printing black PLA at 190ºC,",
"ask the same question for other settings (e.g., print speed).",
"printing temperature can be different depending on the printer, the",
"slicer settings. For example, I've had success printing black PLA",
"like to see a general guide for this, based on",
"PLA at 190ºC, but silver PLA of the same brand",
"factors than extrusion temperature, but I didn't want to make",
"may later ask the same question for other settings (e.g.,",
"(at least) the following questions: 1. Which known factors before",
"this question too general. I may later ask the same",
"print speed). However, do let me know if this question",
"the same brand is giving me trouble. I'm having a",
"giving me trouble. I'm having a hard time figuring out",
"on the printer, the filament, the model and other slicer",
"of a lookup table, or similar. The second and third",
"I didn't want to make this question too general. I",
"want to make this question too general. I may later",
"me know if this question should be expanded or improved",
"failed print. *I understand that the failure or success of",
"happen during or after a print when the temperature is",
"From what I've been able to find out, online sources",
"black PLA at 190ºC, but silver PLA of the same",
"3. What can happen during or after a print when",
"the first question could take the form of a lookup",
"and third could help someone adjust their temperature based on",
"temperature? Obvious example: ABS vs PLA 2. What can happen",
"of a failed print. *I understand that the failure or",
"general. I may later ask the same question for other",
"this question should be expanded or improved to make it",
"many more factors than extrusion temperature, but I didn't want",
"a print can depend on many more factors than extrusion",
"or after a print when the temperature is too low?",
"rules. So I would like to see a general guide",
"find out, online sources recommend around 205ºC for PLA and",
"or similar. The second and third could help someone adjust",
"I've had success printing black PLA at 190ºC, but silver",
"and around 240ºC for ABS. But these are only guidelines,",
"determine the right extrusion temperature? Obvious example: ABS vs PLA",
"printing black PLA at 190ºC, but silver PLA of the",
"based on (at least) the following questions: 1. Which known",
"factors before a print can help determine the right extrusion",
"success printing black PLA at 190ºC, but silver PLA of",
"print when the temperature is too low? 3. What can",
"been able to find out, online sources recommend around 205ºC",
"is too low? 3. What can happen during or after",
"I would like to see a general guide for this,",
"the temperature is too low? 3. What can happen during",
"the failure or success of a print can depend on",
"of a print can depend on many more factors than",
"I've been able to find out, online sources recommend around",
"of the same brand is giving me trouble. I'm having",
"240ºC for ABS. But these are only guidelines, of course.",
"the general rules. So I would like to see a",
"second and third could help someone adjust their temperature based",
"someone adjust their temperature based on the symptoms of a",
"on the symptoms of a failed print. *I understand that",
"didn't want to make this question too general. I may",
"later ask the same question for other settings (e.g., print",
"a print can help determine the right extrusion temperature? Obvious",
"190ºC, but silver PLA of the same brand is giving",
"questions: 1. Which known factors before a print can help",
"print when the temperature is too high? An answer to",
"So I would like to see a general guide for",
"Which known factors before a print can help determine the",
"temperature can be different depending on the printer, the filament,",
"help determine the right extrusion temperature? Obvious example: ABS vs",
"2. What can happen during or after a print when",
"third could help someone adjust their temperature based on the",
"and other slicer settings. For example, I've had success printing",
"me trouble. I'm having a hard time figuring out the",
"temperature is too low? 3. What can happen during or",
"first question could take the form of a lookup table,",
"the same question for other settings (e.g., print speed). However,",
"out the general rules. So I would like to see",
"to the first question could take the form of a",
"known factors before a print can help determine the right",
"trouble. I'm having a hard time figuring out the general",
"But these are only guidelines, of course. Optimal printing temperature",
"PLA of the same brand is giving me trouble. I'm",
"are only guidelines, of course. Optimal printing temperature can be",
"1. Which known factors before a print can help determine",
"symptoms of a failed print. *I understand that the failure",
"course. Optimal printing temperature can be different depending on the",
"make this question too general. I may later ask the",
"online sources recommend around 205ºC for PLA and around 240ºC",
"can help determine the right extrusion temperature? Obvious example: ABS",
"example, I've had success printing black PLA at 190ºC, but",
"the filament, the model and other slicer settings. For example,",
"general guide for this, based on (at least) the following",
"or success of a print can depend on many more",
"do let me know if this question should be expanded",
"see a general guide for this, based on (at least)",
"settings (e.g., print speed). However, do let me know if",
"filament, the model and other slicer settings. For example, I've",
"this, based on (at least) the following questions: 1. Which",
"out, online sources recommend around 205ºC for PLA and around",
"the temperature is too high? An answer to the first",
"able to find out, online sources recommend around 205ºC for",
"could take the form of a lookup table, or similar.",
"The second and third could help someone adjust their temperature",
"than extrusion temperature, but I didn't want to make this",
"(e.g., print speed). However, do let me know if this",
"question should be expanded or improved to make it more",
"the model and other slicer settings. For example, I've had",
"a print when the temperature is too high? An answer",
"recommend around 205ºC for PLA and around 240ºC for ABS.",
"same question for other settings (e.g., print speed). However, do",
"temperature, but I didn't want to make this question too",
"had success printing black PLA at 190ºC, but silver PLA",
"before a print can help determine the right extrusion temperature?",
"is too high? An answer to the first question could",
"can happen during or after a print when the temperature",
"depend on many more factors than extrusion temperature, but I",
"question too general. I may later ask the same question",
"at 190ºC, but silver PLA of the same brand is",
"I'm having a hard time figuring out the general rules.",
"settings. For example, I've had success printing black PLA at",
"print can depend on many more factors than extrusion temperature,",
"time figuring out the general rules. So I would like",
"a general guide for this, based on (at least) the",
"too general. I may later ask the same question for",
"having a hard time figuring out the general rules. So",
"other settings (e.g., print speed). However, do let me know",
"for other settings (e.g., print speed). However, do let me",
"to see a general guide for this, based on (at",
"205ºC for PLA and around 240ºC for ABS. But these",
"a print when the temperature is too low? 3. What",
"An answer to the first question could take the form",
"is giving me trouble. I'm having a hard time figuring",
"PLA 2. What can happen during or after a print",
"if this question should be expanded or improved to make",
"I may later ask the same question for other settings",
"when the temperature is too low? 3. What can happen",
"least) the following questions: 1. Which known factors before a",
"Optimal printing temperature can be different depending on the printer,",
"print can help determine the right extrusion temperature? Obvious example:",
"answer to the first question could take the form of",
"high? An answer to the first question could take the",
"a failed print. *I understand that the failure or success",
"around 240ºC for ABS. But these are only guidelines, of",
"right extrusion temperature? Obvious example: ABS vs PLA 2. What",
"can depend on many more factors than extrusion temperature, but",
"temperature based on the symptoms of a failed print. *I",
"figuring out the general rules. So I would like to",
"hard time figuring out the general rules. So I would",
"when the temperature is too high? An answer to the",
"PLA and around 240ºC for ABS. But these are only",
"during or after a print when the temperature is too",
"but I didn't want to make this question too general.",
"question for other settings (e.g., print speed). However, do let",
"after a print when the temperature is too high? An",
"a hard time figuring out the general rules. So I",
"silver PLA of the same brand is giving me trouble.",
"be different depending on the printer, the filament, the model",
"for ABS. But these are only guidelines, of course. Optimal"
] |
[
"for the body. Someone suggested using HDPE (high-density polyethylene), since",
"prototypes easy. I know HDPE can also be used for",
"Someone suggested using HDPE (high-density polyethylene), since it works well",
"3-D printer recently, and I've been trying to experiment a",
"never tried it before. Does anybody have any input on",
"to experiment a little with different materials for the body.",
"or other potential materials for the body? I'm trying to",
"I'm trying to avoid using wood, as I've had some",
"for the body? I'm trying to avoid using wood, as",
"different materials for the body. Someone suggested using HDPE (high-density",
"filament, but I've never tried it before. Does anybody have",
"I've been trying to experiment a little with different materials",
"a number of prototypes easy. I know HDPE can also",
"can also be used for filament, but I've never tried",
"a little with different materials for the body. Someone suggested",
"body. Someone suggested using HDPE (high-density polyethylene), since it works",
"trying to avoid using wood, as I've had some poor",
"I've never tried it before. Does anybody have any input",
"the body. Someone suggested using HDPE (high-density polyethylene), since it",
"any input on HDPE, or other potential materials for the",
"been working on my own DIY 3-D printer recently, and",
"since it works well on a CNC machine, which would",
"trying to experiment a little with different materials for the",
"tried it before. Does anybody have any input on HDPE,",
"it works well on a CNC machine, which would make",
"using HDPE (high-density polyethylene), since it works well on a",
"have any input on HDPE, or other potential materials for",
"my own DIY 3-D printer recently, and I've been trying",
"HDPE, or other potential materials for the body? I'm trying",
"HDPE can also be used for filament, but I've never",
"working on my own DIY 3-D printer recently, and I've",
"little with different materials for the body. Someone suggested using",
"DIY 3-D printer recently, and I've been trying to experiment",
"well on a CNC machine, which would make creating a",
"been trying to experiment a little with different materials for",
"Does anybody have any input on HDPE, or other potential",
"potential materials for the body? I'm trying to avoid using",
"before. Does anybody have any input on HDPE, or other",
"works well on a CNC machine, which would make creating",
"CNC machine, which would make creating a number of prototypes",
"on HDPE, or other potential materials for the body? I'm",
"the body? I'm trying to avoid using wood, as I've",
"(high-density polyethylene), since it works well on a CNC machine,",
"with different materials for the body. Someone suggested using HDPE",
"materials for the body? I'm trying to avoid using wood,",
"which would make creating a number of prototypes easy. I",
"number of prototypes easy. I know HDPE can also be",
"on my own DIY 3-D printer recently, and I've been",
"I know HDPE can also be used for filament, but",
"also be used for filament, but I've never tried it",
"to avoid using wood, as I've had some poor experiences",
"using wood, as I've had some poor experiences with it.",
"HDPE (high-density polyethylene), since it works well on a CNC",
"used for filament, but I've never tried it before. Does",
"polyethylene), since it works well on a CNC machine, which",
"on a CNC machine, which would make creating a number",
"it before. Does anybody have any input on HDPE, or",
"for filament, but I've never tried it before. Does anybody",
"input on HDPE, or other potential materials for the body?",
"easy. I know HDPE can also be used for filament,",
"make creating a number of prototypes easy. I know HDPE",
"would make creating a number of prototypes easy. I know",
"creating a number of prototypes easy. I know HDPE can",
"know HDPE can also be used for filament, but I've",
"recently, and I've been trying to experiment a little with",
"other potential materials for the body? I'm trying to avoid",
"a CNC machine, which would make creating a number of",
"avoid using wood, as I've had some poor experiences with",
"be used for filament, but I've never tried it before.",
"experiment a little with different materials for the body. Someone",
"machine, which would make creating a number of prototypes easy.",
"own DIY 3-D printer recently, and I've been trying to",
"body? I'm trying to avoid using wood, as I've had",
"and I've been trying to experiment a little with different",
"I've been working on my own DIY 3-D printer recently,",
"anybody have any input on HDPE, or other potential materials",
"suggested using HDPE (high-density polyethylene), since it works well on",
"materials for the body. Someone suggested using HDPE (high-density polyethylene),",
"of prototypes easy. I know HDPE can also be used",
"printer recently, and I've been trying to experiment a little",
"but I've never tried it before. Does anybody have any"
] |
[
"what do you do with 3D prints that either failed",
"professional recycling, or are there any recommendations for properly disposing",
"filament, or restarting a failed print half-way, none of which",
"applicable because it wouldn't apply to prototype prints that you",
"failed print half-way, none of which were the information I",
"on environment, turning prints back into filament, or restarting a",
"the closest I got was effects on environment, turning prints",
"information I was looking for. The solution should be somewhat",
"keeping unwanted prints in a box somewhere isn't a very",
"a very good solution either. Finishing off failed prints isn't",
"printer I am planning to get uses filament that can",
"Finishing off failed prints isn't totally applicable because it wouldn't",
"it wouldn't apply to prototype prints that you don't want",
"a 3D printer soon and I was just wondering, what",
"planning to get uses filament that can be made of",
"anywhere to send failed 3D prints for professional recycling, or",
"print half-way, none of which were the information I was",
"solution should be somewhat eco and just keeping unwanted prints",
"properly disposing 3D prints? In case this is of any",
"none of which were the information I was looking for.",
"isn't totally applicable because it wouldn't apply to prototype prints",
"prints in a box somewhere isn't a very good solution",
"environment, turning prints back into filament, or restarting a failed",
"is of any use, the printer I am planning to",
"effects on environment, turning prints back into filament, or restarting",
"half-way, none of which were the information I was looking",
"isn't a very good solution either. Finishing off failed prints",
"filament that can be made of PLA, ABS, Nylon, and",
"just keeping unwanted prints in a box somewhere isn't a",
"very good solution either. Finishing off failed prints isn't totally",
"that either failed or were prototypes that you no longer",
"do you do with 3D prints that either failed or",
"a box somewhere isn't a very good solution either. Finishing",
"were the information I was looking for. The solution should",
"I am planning on getting a 3D printer soon and",
"I was looking for. The solution should be somewhat eco",
"to get uses filament that can be made of PLA,",
"printer soon and I was just wondering, what do you",
"turning prints back into filament, or restarting a failed print",
"was looking for. The solution should be somewhat eco and",
"other materials. The printer is this one specifically (<https://www.kickstarter.com/projects/101hero/101hero-the-world-first-us49-3d-printer>) from",
"was effects on environment, turning prints back into filament, or",
"disposing 3D prints? In case this is of any use,",
"recycling, or are there any recommendations for properly disposing 3D",
"get uses filament that can be made of PLA, ABS,",
"in a box somewhere isn't a very good solution either.",
"and just keeping unwanted prints in a box somewhere isn't",
"uses filament that can be made of PLA, ABS, Nylon,",
"for properly disposing 3D prints? In case this is of",
"made of PLA, ABS, Nylon, and possibly other materials. The",
"soon and I was just wondering, what do you do",
"wouldn't apply to prototype prints that you don't want to",
"am planning on getting a 3D printer soon and I",
"to send failed 3D prints for professional recycling, or are",
"3D printer soon and I was just wondering, what do",
"Is there anywhere to send failed 3D prints for professional",
"In case this is of any use, the printer I",
"I am planning to get uses filament that can be",
"were prototypes that you no longer want? I tried looking",
"I tried looking online but the closest I got was",
"the printer I am planning to get uses filament that",
"no longer want? I tried looking online but the closest",
"unwanted prints in a box somewhere isn't a very good",
"back into filament, or restarting a failed print half-way, none",
"because it wouldn't apply to prototype prints that you don't",
"prints that either failed or were prototypes that you no",
"to keep. Is there anywhere to send failed 3D prints",
"failed prints isn't totally applicable because it wouldn't apply to",
"don't want to keep. Is there anywhere to send failed",
"of PLA, ABS, Nylon, and possibly other materials. The printer",
"keep. Is there anywhere to send failed 3D prints for",
"any recommendations for properly disposing 3D prints? In case this",
"be made of PLA, ABS, Nylon, and possibly other materials.",
"either. Finishing off failed prints isn't totally applicable because it",
"are there any recommendations for properly disposing 3D prints? In",
"good solution either. Finishing off failed prints isn't totally applicable",
"you do with 3D prints that either failed or were",
"somewhat eco and just keeping unwanted prints in a box",
"3D prints for professional recycling, or are there any recommendations",
"restarting a failed print half-way, none of which were the",
"there any recommendations for properly disposing 3D prints? In case",
"case this is of any use, the printer I am",
"for. The solution should be somewhat eco and just keeping",
"eco and just keeping unwanted prints in a box somewhere",
"somewhere isn't a very good solution either. Finishing off failed",
"solution either. Finishing off failed prints isn't totally applicable because",
"should be somewhat eco and just keeping unwanted prints in",
"prints? In case this is of any use, the printer",
"on getting a 3D printer soon and I was just",
"for professional recycling, or are there any recommendations for properly",
"with 3D prints that either failed or were prototypes that",
"of any use, the printer I am planning to get",
"planning on getting a 3D printer soon and I was",
"into filament, or restarting a failed print half-way, none of",
"to prototype prints that you don't want to keep. Is",
"but the closest I got was effects on environment, turning",
"of which were the information I was looking for. The",
"failed or were prototypes that you no longer want? I",
"do with 3D prints that either failed or were prototypes",
"box somewhere isn't a very good solution either. Finishing off",
"prints that you don't want to keep. Is there anywhere",
"there anywhere to send failed 3D prints for professional recycling,",
"want to keep. Is there anywhere to send failed 3D",
"you don't want to keep. Is there anywhere to send",
"you no longer want? I tried looking online but the",
"was just wondering, what do you do with 3D prints",
"the information I was looking for. The solution should be",
"online but the closest I got was effects on environment,",
"totally applicable because it wouldn't apply to prototype prints that",
"be somewhat eco and just keeping unwanted prints in a",
"apply to prototype prints that you don't want to keep.",
"recommendations for properly disposing 3D prints? In case this is",
"that you no longer want? I tried looking online but",
"getting a 3D printer soon and I was just wondering,",
"longer want? I tried looking online but the closest I",
"prototypes that you no longer want? I tried looking online",
"3D prints? In case this is of any use, the",
"use, the printer I am planning to get uses filament",
"The solution should be somewhat eco and just keeping unwanted",
"looking for. The solution should be somewhat eco and just",
"and possibly other materials. The printer is this one specifically",
"am planning to get uses filament that can be made",
"I got was effects on environment, turning prints back into",
"materials. The printer is this one specifically (<https://www.kickstarter.com/projects/101hero/101hero-the-world-first-us49-3d-printer>) from KickStarter.",
"or restarting a failed print half-way, none of which were",
"got was effects on environment, turning prints back into filament,",
"that you don't want to keep. Is there anywhere to",
"that can be made of PLA, ABS, Nylon, and possibly",
"which were the information I was looking for. The solution",
"tried looking online but the closest I got was effects",
"can be made of PLA, ABS, Nylon, and possibly other",
"want? I tried looking online but the closest I got",
"prints for professional recycling, or are there any recommendations for",
"either failed or were prototypes that you no longer want?",
"prototype prints that you don't want to keep. Is there",
"prints isn't totally applicable because it wouldn't apply to prototype",
"Nylon, and possibly other materials. The printer is this one",
"wondering, what do you do with 3D prints that either",
"off failed prints isn't totally applicable because it wouldn't apply",
"just wondering, what do you do with 3D prints that",
"or were prototypes that you no longer want? I tried",
"looking online but the closest I got was effects on",
"a failed print half-way, none of which were the information",
"ABS, Nylon, and possibly other materials. The printer is this",
"and I was just wondering, what do you do with",
"send failed 3D prints for professional recycling, or are there",
"prints back into filament, or restarting a failed print half-way,",
"PLA, ABS, Nylon, and possibly other materials. The printer is",
"3D prints that either failed or were prototypes that you",
"or are there any recommendations for properly disposing 3D prints?",
"this is of any use, the printer I am planning",
"any use, the printer I am planning to get uses",
"I was just wondering, what do you do with 3D",
"possibly other materials. The printer is this one specifically (<https://www.kickstarter.com/projects/101hero/101hero-the-world-first-us49-3d-printer>)",
"closest I got was effects on environment, turning prints back",
"failed 3D prints for professional recycling, or are there any"
] |
[
"this in Blender? Any advice and information would be helpful,",
"set the thickness to a low amount and not make",
"a low amount and not make the object solid (to",
"I want to print in 3D. But I have a",
"parts of an object to be separate colours or materials?",
"when 3D printing? I know how to change the metric",
"Also what if I want two parts of an object",
"an object that I want to print in 3D. But",
"that I want to print in 3D. But I have",
"metric size etc. Some people said that it's best to",
"empty/hollow) in order to save money when printing. Is this",
"Do I have to change this in Blender? Any advice",
"3D. But I have a few questions about it. What",
"Any advice and information would be helpful, thanks. [](https://i.stack.imgur.com/TG6Mg.png) [](https://i.stack.imgur.com/TG6Mg.png) [](https://i.stack.imgur.com/TG6Mg.png)",
"have to watch out for when 3D printing? I know",
"printing? I know how to change the metric size etc.",
"and not make the object solid (to leave the inside",
"separate colours or materials? Do I have to change this",
"change this in Blender? Any advice and information would be",
"how to change the metric size etc. Some people said",
"have a few questions about it. What are the things",
"said that it's best to set the thickness to a",
"people said that it's best to set the thickness to",
"make the object solid (to leave the inside empty/hollow) in",
"helpful, thanks. [](https://i.stack.imgur.com/TG6Mg.png) [](https://i.stack.imgur.com/KIEy1.png)",
"that it's best to set the thickness to a low",
"advice and information would be helpful, thanks. [](https://i.stack.imgur.com/TG6Mg.png) [![enter",
"or materials? Do I have to change this in Blender?",
"want to print in 3D. But I have a few",
"money when printing. Is this true or does it not",
"materials? Do I have to change this in Blender? Any",
"the thickness to a low amount and not make the",
"know how to change the metric size etc. Some people",
"want two parts of an object to be separate colours",
"in order to save money when printing. Is this true",
"save money when printing. Is this true or does it",
"of an object to be separate colours or materials? Do",
"few questions about it. What are the things that I",
"the object solid (to leave the inside empty/hollow) in order",
"to be separate colours or materials? Do I have to",
"printing. Is this true or does it not matter? Also",
"it not matter? Also what if I want two parts",
"to a low amount and not make the object solid"
] |
[
"temperature (the reasoning used in the tutorials I read), but",
"heat plate seems to strongly suggest thermistor placement as in",
"below, so I did too. However, the design of the",
"x-axis). I looked up some tutorials, and all of them",
"the design of the heat plate seems to strongly suggest",
"thermistor placement as in the picture on the right, inside",
"read), but most of my prints are built in the",
"the center of the bed, and the center placement would",
"system more responsive. What are the pros and cons of",
"cons of these placements? And what would be the proper",
"description here](https://i.stack.imgur.com/2nF92.png)](https://i.stack.imgur.com/2nF92.png) [](https://i.stack.imgur.com/tzmTq.png) I can certainly see",
"upside of that. The reported temperature may overshoot the average",
"overshoot the average bed temperature (the reasoning used in the",
"the temperature control system more responsive. What are the pros",
"picture on the right, inside the small hole near the",
"these placements? And what would be the proper technique for",
"but most of my prints are built in the center",
"in the picture on the left below, so I did",
"the average bed temperature (the reasoning used in the tutorials",
"heated bed (and longer x-axis). I looked up some tutorials,",
"strongly suggest thermistor placement as in the picture on the",
"small hole near the center. [](https://i.stack.imgur.com/2nF92.png) [](https://i.stack.imgur.com/tzmTq.png) I can certainly see the upside of that. The",
"pros and cons of these placements? And what would be",
"image description here](https://i.stack.imgur.com/2nF92.png)](https://i.stack.imgur.com/2nF92.png) [](https://i.stack.imgur.com/tzmTq.png) I can certainly",
"seems to strongly suggest thermistor placement as in the picture",
"[](https://i.stack.imgur.com/tzmTq.png) I can certainly see the upside",
"makes physical contact with the aluminum of the print bed?",
"the small hole near the center. [](https://i.stack.imgur.com/2nF92.png)",
"I read), but most of my prints are built in",
"putting the sensor in the center? Should I still use",
"surely make the temperature control system more responsive. What are",
"the thermistor makes physical contact with the aluminum of the",
"more responsive. What are the pros and cons of these",
"the upside of that. The reported temperature may overshoot the",
"of the bed, and the center placement would surely make",
"I looked up some tutorials, and all of them placed",
"of them placed the thermistor as in the picture on",
"The reported temperature may overshoot the average bed temperature (the",
"would surely make the temperature control system more responsive. What",
"I just recently upgraded my Printrbot Simple Metal with a",
"them placed the thermistor as in the picture on the",
"the center. [](https://i.stack.imgur.com/2nF92.png) [](https://i.stack.imgur.com/tzmTq.png)",
"Should I still use kapton tape? Do I need to",
"of that. The reported temperature may overshoot the average bed",
"center? Should I still use kapton tape? Do I need",
"What are the pros and cons of these placements? And",
"hole near the center. [](https://i.stack.imgur.com/2nF92.png) [](https://i.stack.imgur.com/tzmTq.png) I can certainly see the upside of that.",
"temperature may overshoot the average bed temperature (the reasoning used",
"center. [](https://i.stack.imgur.com/2nF92.png) [](https://i.stack.imgur.com/tzmTq.png) I",
"and all of them placed the thermistor as in the",
"may overshoot the average bed temperature (the reasoning used in",
"tutorials I read), but most of my prints are built",
"my Printrbot Simple Metal with a heated bed (and longer",
"placement as in the picture on the right, inside the",
"the picture on the left below, so I did too.",
"image description here](https://i.stack.imgur.com/tzmTq.png)](https://i.stack.imgur.com/tzmTq.png) I can certainly see the upside of",
"(and longer x-axis). I looked up some tutorials, and all",
"design of the heat plate seems to strongly suggest thermistor",
"for putting the sensor in the center? Should I still",
"the pros and cons of these placements? And what would",
"make sure the thermistor makes physical contact with the aluminum",
"so I did too. However, the design of the heat",
"on the left below, so I did too. However, the",
"in the center of the bed, and the center placement",
"the thermistor as in the picture on the left below,",
"with a heated bed (and longer x-axis). I looked up",
"use kapton tape? Do I need to make sure the",
"near the center. [](https://i.stack.imgur.com/2nF92.png) [](https://i.stack.imgur.com/2nF92.png) [](https://i.stack.imgur.com/tzmTq.png) I can",
"the right, inside the small hole near the center. [](https://i.stack.imgur.com/2nF92.png) [](https://i.stack.imgur.com/tzmTq.png) I can certainly see the",
"I can certainly see the upside of that. The reported",
"recently upgraded my Printrbot Simple Metal with a heated bed",
"would be the proper technique for putting the sensor in",
"proper technique for putting the sensor in the center? Should",
"are built in the center of the bed, and the",
"make the temperature control system more responsive. What are the",
"sure the thermistor makes physical contact with the aluminum of",
"of these placements? And what would be the proper technique",
"and cons of these placements? And what would be the",
"Metal with a heated bed (and longer x-axis). I looked",
"some tutorials, and all of them placed the thermistor as",
"Simple Metal with a heated bed (and longer x-axis). I",
"to make sure the thermistor makes physical contact with the",
"(the reasoning used in the tutorials I read), but most",
"bed temperature (the reasoning used in the tutorials I read),",
"inside the small hole near the center. [![enter image description",
"the left below, so I did too. However, the design",
"used in the tutorials I read), but most of my",
"kapton tape? Do I need to make sure the thermistor",
"the bed, and the center placement would surely make the",
"to strongly suggest thermistor placement as in the picture on",
"center placement would surely make the temperature control system more",
"and the center placement would surely make the temperature control",
"Printrbot Simple Metal with a heated bed (and longer x-axis).",
"that. The reported temperature may overshoot the average bed temperature",
"tutorials, and all of them placed the thermistor as in",
"plate seems to strongly suggest thermistor placement as in the"
] |
[
"because I'll want my nozzle to start higher for 0.3mm",
"my z-probe offset. This is obviously an oversight, because I'll",
"recalibrate every time I switch to a different layer height?",
"a different layer height? Or can slicers store a reference",
"store a reference layer height + probe offset and just",
"need to recalibrate every time I switch to a different",
"height constant throughout my prints to spare myself this frustration?",
"is it smartest to keep the 1st layer height constant",
"is obviously an oversight, because I'll want my nozzle to",
"to me that I'm never really thinking about layer height",
"for 0.3mm layers than for 0.1mm layers. After this realization",
"the question: Do I need to recalibrate every time I",
"I calibrate my z-probe offset. This is obviously an oversight,",
"1st layer height constant throughout my prints to spare myself",
"smartest to keep the 1st layer height constant throughout my",
"for 0.1mm layers. After this realization comes the question: Do",
"calibrate my z-probe offset. This is obviously an oversight, because",
"just deduce the proper starting height for every print? Or",
"can slicers store a reference layer height + probe offset",
"the 1st layer height constant throughout my prints to spare",
"layer height when I calibrate my z-probe offset. This is",
"proper starting height for every print? Or is it smartest",
"I'll want my nozzle to start higher for 0.3mm layers",
"prints to spare myself this frustration? If it matters, my",
"height + probe offset and just deduce the proper starting",
"Or is it smartest to keep the 1st layer height",
"I need to recalibrate every time I switch to a",
"constant throughout my prints to spare myself this frustration? If",
"It occurs to me that I'm never really thinking about",
"deduce the proper starting height for every print? Or is",
"start higher for 0.3mm layers than for 0.1mm layers. After",
"comes the question: Do I need to recalibrate every time",
"it matters, my printer is the Printrbot Simple Metal, and",
"z-probe offset. This is obviously an oversight, because I'll want",
"spare myself this frustration? If it matters, my printer is",
"time I switch to a different layer height? Or can",
"a reference layer height + probe offset and just deduce",
"+ probe offset and just deduce the proper starting height",
"frustration? If it matters, my printer is the Printrbot Simple",
"this frustration? If it matters, my printer is the Printrbot",
"thinking about layer height when I calibrate my z-probe offset.",
"layers. After this realization comes the question: Do I need",
"realization comes the question: Do I need to recalibrate every",
"0.3mm layers than for 0.1mm layers. After this realization comes",
"Or can slicers store a reference layer height + probe",
"throughout my prints to spare myself this frustration? If it",
"an oversight, because I'll want my nozzle to start higher",
"I'm never really thinking about layer height when I calibrate",
"never really thinking about layer height when I calibrate my",
"that I'm never really thinking about layer height when I",
"reference layer height + probe offset and just deduce the",
"to start higher for 0.3mm layers than for 0.1mm layers.",
"to a different layer height? Or can slicers store a",
"layers than for 0.1mm layers. After this realization comes the",
"height? Or can slicers store a reference layer height +",
"to keep the 1st layer height constant throughout my prints",
"for every print? Or is it smartest to keep the",
"oversight, because I'll want my nozzle to start higher for",
"After this realization comes the question: Do I need to",
"when I calibrate my z-probe offset. This is obviously an",
"0.1mm layers. After this realization comes the question: Do I",
"nozzle to start higher for 0.3mm layers than for 0.1mm",
"starting height for every print? Or is it smartest to",
"my prints to spare myself this frustration? If it matters,",
"Do I need to recalibrate every time I switch to",
"higher for 0.3mm layers than for 0.1mm layers. After this",
"height when I calibrate my z-probe offset. This is obviously",
"print? Or is it smartest to keep the 1st layer",
"me that I'm never really thinking about layer height when",
"layer height? Or can slicers store a reference layer height",
"matters, my printer is the Printrbot Simple Metal, and my",
"this realization comes the question: Do I need to recalibrate",
"to recalibrate every time I switch to a different layer",
"my nozzle to start higher for 0.3mm layers than for",
"layer height + probe offset and just deduce the proper",
"the Printrbot Simple Metal, and my goto slicer is Cura.",
"every print? Or is it smartest to keep the 1st",
"printer is the Printrbot Simple Metal, and my goto slicer",
"want my nozzle to start higher for 0.3mm layers than",
"slicers store a reference layer height + probe offset and",
"occurs to me that I'm never really thinking about layer",
"offset. This is obviously an oversight, because I'll want my",
"than for 0.1mm layers. After this realization comes the question:",
"myself this frustration? If it matters, my printer is the",
"I switch to a different layer height? Or can slicers",
"to spare myself this frustration? If it matters, my printer",
"probe offset and just deduce the proper starting height for",
"keep the 1st layer height constant throughout my prints to",
"my printer is the Printrbot Simple Metal, and my goto",
"and just deduce the proper starting height for every print?",
"height for every print? Or is it smartest to keep",
"the proper starting height for every print? Or is it",
"This is obviously an oversight, because I'll want my nozzle",
"obviously an oversight, because I'll want my nozzle to start",
"different layer height? Or can slicers store a reference layer",
"about layer height when I calibrate my z-probe offset. This",
"every time I switch to a different layer height? Or",
"layer height constant throughout my prints to spare myself this",
"question: Do I need to recalibrate every time I switch",
"switch to a different layer height? Or can slicers store",
"really thinking about layer height when I calibrate my z-probe",
"is the Printrbot Simple Metal, and my goto slicer is",
"If it matters, my printer is the Printrbot Simple Metal,",
"it smartest to keep the 1st layer height constant throughout",
"offset and just deduce the proper starting height for every"
] |
[
"mold, would toxins leech into the mold? And if so,",
"so, is there a barrier I can use to prevent",
"not food safe, but if I create positives for a",
"mold? And if so, is there a barrier I can",
"that I can now make any positive I want. The",
"candy, and I came across this page: [Lage brick shaped",
"came across this page: [Lage brick shaped gummy candies](http://www.instructables.com/id/LeGummies-brick-shaped-gummy-candies/), describing",
"I want. The question is, would that be safe? I",
"my own candy, and I came across this page: [Lage",
"can now make any positive I want. The question is,",
"candies](http://www.instructables.com/id/LeGummies-brick-shaped-gummy-candies/), describing how to use real Lage bricks as a",
"and inspired by the usual description of ABS filament (\"It's",
"use real Lage bricks as a positive to make silicone",
"a 3D printer, and inspired by the usual description of",
"if so, is there a barrier I can use to",
"a positive to make silicone molds for Lage brick shaped",
"the usual description of ABS filament (\"It's the same plastic",
"(\"It's the same plastic used to make Lage bricks\") it",
"I came across this page: [Lage brick shaped gummy candies](http://www.instructables.com/id/LeGummies-brick-shaped-gummy-candies/),",
"use to prevent this, such as some kind of coating?",
"page: [Lage brick shaped gummy candies](http://www.instructables.com/id/LeGummies-brick-shaped-gummy-candies/), describing how to use",
"the mold? And if so, is there a barrier I",
"I create positives for a food safe silicone mold, would",
"is not food safe, but if I create positives for",
"of years ago, I was researching making my own candy,",
"across this page: [Lage brick shaped gummy candies](http://www.instructables.com/id/LeGummies-brick-shaped-gummy-candies/), describing how",
"that be safe? I know the filament I'm using is",
"I was researching making my own candy, and I came",
"make any positive I want. The question is, would that",
"I know the filament I'm using is not food safe,",
"[Lage brick shaped gummy candies](http://www.instructables.com/id/LeGummies-brick-shaped-gummy-candies/), describing how to use real",
"shaped gummy candies](http://www.instructables.com/id/LeGummies-brick-shaped-gummy-candies/), describing how to use real Lage bricks",
"real Lage bricks as a positive to make silicone molds",
"that I have a 3D printer, and inspired by the",
"of ABS filament (\"It's the same plastic used to make",
"question is, would that be safe? I know the filament",
"to make silicone molds for Lage brick shaped candy. Now",
"bricks as a positive to make silicone molds for Lage",
"ago, I was researching making my own candy, and I",
"First, a little background. A couple of years ago, I",
"description of ABS filament (\"It's the same plastic used to",
"make silicone molds for Lage brick shaped candy. Now that",
"a little background. A couple of years ago, I was",
"using is not food safe, but if I create positives",
"filament I'm using is not food safe, but if I",
"as a positive to make silicone molds for Lage brick",
"used to make Lage bricks\") it occurs to me that",
"to me that I can now make any positive I",
"make Lage bricks\") it occurs to me that I can",
"know the filament I'm using is not food safe, but",
"background. A couple of years ago, I was researching making",
"3D printer, and inspired by the usual description of ABS",
"I have a 3D printer, and inspired by the usual",
"now make any positive I want. The question is, would",
"plastic used to make Lage bricks\") it occurs to me",
"silicone molds for Lage brick shaped candy. Now that I",
"for Lage brick shaped candy. Now that I have a",
"positives for a food safe silicone mold, would toxins leech",
"can use to prevent this, such as some kind of",
"to use real Lage bricks as a positive to make",
"making my own candy, and I came across this page:",
"but if I create positives for a food safe silicone",
"any positive I want. The question is, would that be",
"have a 3D printer, and inspired by the usual description",
"want. The question is, would that be safe? I know",
"years ago, I was researching making my own candy, and",
"molds for Lage brick shaped candy. Now that I have",
"brick shaped gummy candies](http://www.instructables.com/id/LeGummies-brick-shaped-gummy-candies/), describing how to use real Lage",
"filament (\"It's the same plastic used to make Lage bricks\")",
"be safe? I know the filament I'm using is not",
"it occurs to me that I can now make any",
"researching making my own candy, and I came across this",
"create positives for a food safe silicone mold, would toxins",
"Now that I have a 3D printer, and inspired by",
"me that I can now make any positive I want.",
"toxins leech into the mold? And if so, is there",
"by the usual description of ABS filament (\"It's the same",
"for a food safe silicone mold, would toxins leech into",
"Lage bricks\") it occurs to me that I can now",
"Lage brick shaped candy. Now that I have a 3D",
"into the mold? And if so, is there a barrier",
"a barrier I can use to prevent this, such as",
"the same plastic used to make Lage bricks\") it occurs",
"I can now make any positive I want. The question",
"safe? I know the filament I'm using is not food",
"would toxins leech into the mold? And if so, is",
"brick shaped candy. Now that I have a 3D printer,",
"Lage bricks as a positive to make silicone molds for",
"occurs to me that I can now make any positive",
"leech into the mold? And if so, is there a",
"safe silicone mold, would toxins leech into the mold? And",
"and I came across this page: [Lage brick shaped gummy",
"ABS filament (\"It's the same plastic used to make Lage",
"food safe, but if I create positives for a food",
"gummy candies](http://www.instructables.com/id/LeGummies-brick-shaped-gummy-candies/), describing how to use real Lage bricks as",
"shaped candy. Now that I have a 3D printer, and",
"inspired by the usual description of ABS filament (\"It's the",
"silicone mold, would toxins leech into the mold? And if",
"positive to make silicone molds for Lage brick shaped candy.",
"I'm using is not food safe, but if I create",
"would that be safe? I know the filament I'm using",
"a food safe silicone mold, would toxins leech into the",
"I can use to prevent this, such as some kind",
"is, would that be safe? I know the filament I'm",
"same plastic used to make Lage bricks\") it occurs to",
"And if so, is there a barrier I can use",
"was researching making my own candy, and I came across",
"couple of years ago, I was researching making my own",
"safe, but if I create positives for a food safe",
"A couple of years ago, I was researching making my",
"is there a barrier I can use to prevent this,",
"barrier I can use to prevent this, such as some",
"candy. Now that I have a 3D printer, and inspired",
"own candy, and I came across this page: [Lage brick",
"little background. A couple of years ago, I was researching",
"describing how to use real Lage bricks as a positive",
"if I create positives for a food safe silicone mold,",
"the filament I'm using is not food safe, but if",
"this page: [Lage brick shaped gummy candies](http://www.instructables.com/id/LeGummies-brick-shaped-gummy-candies/), describing how to",
"The question is, would that be safe? I know the",
"there a barrier I can use to prevent this, such",
"bricks\") it occurs to me that I can now make",
"printer, and inspired by the usual description of ABS filament",
"usual description of ABS filament (\"It's the same plastic used",
"to make Lage bricks\") it occurs to me that I",
"positive I want. The question is, would that be safe?",
"food safe silicone mold, would toxins leech into the mold?",
"how to use real Lage bricks as a positive to"
] |
[
"need to transport my FDM 3D Printer because I am",
"transport. Should I have a housing to avoid dust and",
"the precautions that one should take? Should I dismount the",
"electronics as far as reasonable and fix the motors to",
"during transport. Should I have a housing to avoid dust",
"to the frame so they don't slide during transport. Should",
"the motors and axes? I would definitively unplug the electronics",
"I need to transport my FDM 3D Printer because I",
"FDM 3D Printer because I am moving. What are the",
"slide during transport. Should I have a housing to avoid",
"I dismount the motors and axes? I would definitively unplug",
"the motors to the frame so they don't slide during",
"motors and axes? I would definitively unplug the electronics as",
"my FDM 3D Printer because I am moving. What are",
"Should I have a housing to avoid dust and other",
"to transport my FDM 3D Printer because I am moving.",
"take? Should I dismount the motors and axes? I would",
"Should I dismount the motors and axes? I would definitively",
"as reasonable and fix the motors to the frame so",
"and fix the motors to the frame so they don't",
"motors to the frame so they don't slide during transport.",
"I have a housing to avoid dust and other mechanical",
"3D Printer because I am moving. What are the precautions",
"don't slide during transport. Should I have a housing to",
"one should take? Should I dismount the motors and axes?",
"have a housing to avoid dust and other mechanical issues?",
"the electronics as far as reasonable and fix the motors",
"Printer because I am moving. What are the precautions that",
"unplug the electronics as far as reasonable and fix the",
"far as reasonable and fix the motors to the frame",
"am moving. What are the precautions that one should take?",
"as far as reasonable and fix the motors to the",
"reasonable and fix the motors to the frame so they",
"they don't slide during transport. Should I have a housing",
"because I am moving. What are the precautions that one",
"I am moving. What are the precautions that one should",
"definitively unplug the electronics as far as reasonable and fix",
"should take? Should I dismount the motors and axes? I",
"I would definitively unplug the electronics as far as reasonable",
"axes? I would definitively unplug the electronics as far as",
"moving. What are the precautions that one should take? Should",
"fix the motors to the frame so they don't slide",
"so they don't slide during transport. Should I have a",
"What are the precautions that one should take? Should I",
"would definitively unplug the electronics as far as reasonable and",
"are the precautions that one should take? Should I dismount",
"and axes? I would definitively unplug the electronics as far",
"the frame so they don't slide during transport. Should I",
"precautions that one should take? Should I dismount the motors",
"dismount the motors and axes? I would definitively unplug the",
"frame so they don't slide during transport. Should I have",
"transport my FDM 3D Printer because I am moving. What",
"that one should take? Should I dismount the motors and"
] |
[
"home built RepRap with all sides open.. Would there be",
"built RepRap with all sides open.. Would there be any",
"there be any advantage to enclosing the print area in",
"RepRap with all sides open.. Would there be any advantage",
"with all sides open.. Would there be any advantage to",
"be any advantage to enclosing the print area in acrylic?",
"open.. Would there be any advantage to enclosing the print",
"have a home built RepRap with all sides open.. Would",
"all sides open.. Would there be any advantage to enclosing",
"sides open.. Would there be any advantage to enclosing the",
"Would there be any advantage to enclosing the print area",
"a home built RepRap with all sides open.. Would there",
"I have a home built RepRap with all sides open.."
] |
[
"am printing on a non-heated bed right now, but the",
"the question also applies to heated building plates. How often",
"on a non-heated bed right now, but the question also",
"I am printing on a non-heated bed right now, but",
"such as in this [forum](https://ultimaker.com/en/community/19056-glue-stick-or), while others say to replace",
"the glue layers that's supposed to be applied before printing?",
"applies to heated building plates. How often should you replace",
"to be applied before printing? Some say you can do",
"now, but the question also applies to heated building plates.",
"others say to replace it every print. What is the",
"that's supposed to be applied before printing? Some say you",
"you replace the glue layers that's supposed to be applied",
"applied before printing? Some say you can do up to",
"replace the glue layers that's supposed to be applied before",
"say to replace it every print. What is the correct",
"How often should you replace the glue layers that's supposed",
"question also applies to heated building plates. How often should",
"up to a few prints, such as in this [forum](https://ultimaker.com/en/community/19056-glue-stick-or),",
"while others say to replace it every print. What is",
"often should you replace the glue layers that's supposed to",
"also applies to heated building plates. How often should you",
"be applied before printing? Some say you can do up",
"to replace it every print. What is the correct approach?",
"bed right now, but the question also applies to heated",
"should you replace the glue layers that's supposed to be",
"a non-heated bed right now, but the question also applies",
"few prints, such as in this [forum](https://ultimaker.com/en/community/19056-glue-stick-or), while others say",
"can do up to a few prints, such as in",
"supposed to be applied before printing? Some say you can",
"but the question also applies to heated building plates. How",
"right now, but the question also applies to heated building",
"Some say you can do up to a few prints,",
"printing? Some say you can do up to a few",
"as in this [forum](https://ultimaker.com/en/community/19056-glue-stick-or), while others say to replace it",
"say you can do up to a few prints, such",
"[forum](https://ultimaker.com/en/community/19056-glue-stick-or), while others say to replace it every print. What",
"in this [forum](https://ultimaker.com/en/community/19056-glue-stick-or), while others say to replace it every",
"prints, such as in this [forum](https://ultimaker.com/en/community/19056-glue-stick-or), while others say to",
"to a few prints, such as in this [forum](https://ultimaker.com/en/community/19056-glue-stick-or), while",
"heated building plates. How often should you replace the glue",
"before printing? Some say you can do up to a",
"layers that's supposed to be applied before printing? Some say",
"non-heated bed right now, but the question also applies to",
"this [forum](https://ultimaker.com/en/community/19056-glue-stick-or), while others say to replace it every print.",
"glue layers that's supposed to be applied before printing? Some",
"printing on a non-heated bed right now, but the question",
"do up to a few prints, such as in this",
"building plates. How often should you replace the glue layers",
"to heated building plates. How often should you replace the",
"plates. How often should you replace the glue layers that's",
"a few prints, such as in this [forum](https://ultimaker.com/en/community/19056-glue-stick-or), while others",
"you can do up to a few prints, such as"
] |
[
"Ubuntu system with a M3D printer. Midway through a recent",
"printer were proceeding fine. Since then, every print I attempt",
"a recent print, the filament just stopped extruding although the",
"has trouble extruding proper amounts of filament. It's always not",
"safest way to remove it. The weird thing, though, is",
"it. The weird thing, though, is that when I use",
"say, 220C, the filament comes out fine. You can see",
"a clog in the extruder and wondering the safest way",
"amounts of filament. It's always not enough. The output is",
"filament. It's always not enough. The output is stringy and",
"then, every print I attempt has trouble extruding proper amounts",
"the raft definitely isn't printing right. Way too little output:",
"The weird thing, though, is that when I use manual",
"M3D printer. Midway through a recent print, the filament just",
"printer. Midway through a recent print, the filament just stopped",
"comes out fine. You can see the raft definitely isn't",
"and not cohesive. I'm thinking there may simply be a",
"stopped extruding although the motor-functions of the printer were proceeding",
"through a recent print, the filament just stopped extruding although",
"extruding proper amounts of filament. It's always not enough. The",
"I'm thinking there may simply be a clog in the",
"the filament just stopped extruding although the motor-functions of the",
"not enough. The output is stringy and not cohesive. I'm",
"I use manual control and extrude at, say, 220C, the",
"and extrude at, say, 220C, the filament comes out fine.",
"there may simply be a clog in the extruder and",
"use OctoPrint on an Ubuntu system with a M3D printer.",
"system with a M3D printer. Midway through a recent print,",
"filament just stopped extruding although the motor-functions of the printer",
"and wondering the safest way to remove it. The weird",
"may simply be a clog in the extruder and wondering",
"the extruder and wondering the safest way to remove it.",
"is stringy and not cohesive. I'm thinking there may simply",
"weird thing, though, is that when I use manual control",
"an Ubuntu system with a M3D printer. Midway through a",
"although the motor-functions of the printer were proceeding fine. Since",
"that when I use manual control and extrude at, say,",
"the printer were proceeding fine. Since then, every print I",
"I attempt has trouble extruding proper amounts of filament. It's",
"use manual control and extrude at, say, 220C, the filament",
"definitely isn't printing right. Way too little output: [](https://i.stack.imgur.com/M4Ih4.png)",
"motor-functions of the printer were proceeding fine. Since then, every",
"trouble extruding proper amounts of filament. It's always not enough.",
"remove it. The weird thing, though, is that when I",
"manual control and extrude at, say, 220C, the filament comes",
"the safest way to remove it. The weird thing, though,",
"You can see the raft definitely isn't printing right. Way",
"the filament comes out fine. You can see the raft",
"were proceeding fine. Since then, every print I attempt has",
"not cohesive. I'm thinking there may simply be a clog",
"proper amounts of filament. It's always not enough. The output",
"control and extrude at, say, 220C, the filament comes out",
"on an Ubuntu system with a M3D printer. Midway through",
"clog in the extruder and wondering the safest way to",
"print I attempt has trouble extruding proper amounts of filament.",
"thinking there may simply be a clog in the extruder",
"fine. You can see the raft definitely isn't printing right.",
"Midway through a recent print, the filament just stopped extruding",
"stringy and not cohesive. I'm thinking there may simply be",
"raft definitely isn't printing right. Way too little output: [![enter",
"a M3D printer. Midway through a recent print, the filament",
"I use OctoPrint on an Ubuntu system with a M3D",
"extrude at, say, 220C, the filament comes out fine. You",
"filament comes out fine. You can see the raft definitely",
"attempt has trouble extruding proper amounts of filament. It's always",
"fine. Since then, every print I attempt has trouble extruding",
"to remove it. The weird thing, though, is that when",
"recent print, the filament just stopped extruding although the motor-functions",
"always not enough. The output is stringy and not cohesive.",
"print, the filament just stopped extruding although the motor-functions of",
"of the printer were proceeding fine. Since then, every print",
"isn't printing right. Way too little output: [![enter image description"
] |
[
"star from Blender3d. As far as I know, most printers",
"green line Y-axis), the star doesn't have any flat sides",
"can print this object that doesn't have any flat bottom",
"from Blender3d. As far as I know, most printers require",
"image description here](https://i.stack.imgur.com/V4a6C.png)](https://i.stack.imgur.com/V4a6C.png) Is there a printer (brand/model) that can",
"print this object that doesn't have any flat bottom or",
"star doesn't have any flat sides or points. [](https://i.stack.imgur.com/Mh6Bw.png) There's a hole in the middle of",
"a printer (brand/model) that can print this object that doesn't",
"I've created this star from Blender3d. As far as I",
"most printers require a flat bottom. As you can see",
"description here](https://i.stack.imgur.com/V4a6C.png)](https://i.stack.imgur.com/V4a6C.png) Is there a printer (brand/model) that can print",
"a hole in the middle of the star. [](https://i.stack.imgur.com/V4a6C.png) Is there a printer (brand/model)",
"Y-axis), the star doesn't have any flat sides or points.",
"Z-axis, red line is X-axis, green line Y-axis), the star",
"red line is X-axis, green line Y-axis), the star doesn't",
"any flat sides or points. [](https://i.stack.imgur.com/Mh6Bw.png) There's",
"(blue line is Z-axis, red line is X-axis, green line",
"bottom or sides having a hole that goes through in",
"the star doesn't have any flat sides or points. [](https://i.stack.imgur.com/Mh6Bw.png) There's a hole in the",
"There's a hole in the middle of the star. [](https://i.stack.imgur.com/V4a6C.png) Is there a",
"require a flat bottom. As you can see (blue line",
"As far as I know, most printers require a flat",
"is X-axis, green line Y-axis), the star doesn't have any",
"Blender3d. As far as I know, most printers require a",
"the middle of the star. [](https://i.stack.imgur.com/V4a6C.png) Is",
"doesn't have any flat sides or points. [](https://i.stack.imgur.com/Mh6Bw.png) There's a hole in the middle",
"here](https://i.stack.imgur.com/V4a6C.png)](https://i.stack.imgur.com/V4a6C.png) Is there a printer (brand/model) that can print this",
"I know, most printers require a flat bottom. As you",
"Is there a printer (brand/model) that can print this object",
"can see (blue line is Z-axis, red line is X-axis,",
"in the middle of the star. [](https://i.stack.imgur.com/V4a6C.png)",
"object that doesn't have any flat bottom or sides having",
"that goes through in the middle? Any workarounds to print",
"know, most printers require a flat bottom. As you can",
"printer (brand/model) that can print this object that doesn't have",
"to 3D Printing. I've created this star from Blender3d. As",
"doesn't have any flat bottom or sides having a hole",
"[](https://i.stack.imgur.com/V4a6C.png) Is there a printer (brand/model) that",
"you can see (blue line is Z-axis, red line is",
"sides or points. [](https://i.stack.imgur.com/Mh6Bw.png) There's a hole",
"created this star from Blender3d. As far as I know,",
"or points. [](https://i.stack.imgur.com/Mh6Bw.png) There's a hole in",
"description here](https://i.stack.imgur.com/Mh6Bw.png)](https://i.stack.imgur.com/Mh6Bw.png) There's a hole in the middle of the",
"a flat bottom. As you can see (blue line is",
"flat bottom. As you can see (blue line is Z-axis,",
"printers require a flat bottom. As you can see (blue",
"sides having a hole that goes through in the middle?",
"flat sides or points. [](https://i.stack.imgur.com/Mh6Bw.png) There's a",
"I'm new to 3D Printing. I've created this star from",
"line Y-axis), the star doesn't have any flat sides or",
"As you can see (blue line is Z-axis, red line",
"3D Printing. I've created this star from Blender3d. As far",
"hole that goes through in the middle? Any workarounds to",
"or sides having a hole that goes through in the",
"the star. [](https://i.stack.imgur.com/V4a6C.png) Is there a printer",
"that can print this object that doesn't have any flat",
"here](https://i.stack.imgur.com/Mh6Bw.png)](https://i.stack.imgur.com/Mh6Bw.png) There's a hole in the middle of the star.",
"see (blue line is Z-axis, red line is X-axis, green",
"there a printer (brand/model) that can print this object that",
"middle of the star. [](https://i.stack.imgur.com/V4a6C.png) Is there",
"new to 3D Printing. I've created this star from Blender3d.",
"have any flat sides or points. [](https://i.stack.imgur.com/Mh6Bw.png)",
"as I know, most printers require a flat bottom. As"
] |
[
"from. The distance is actually closer to 50cm. **Edit 2:**",
"I don't know where I got 1-2 meters from. The",
"what I'm proposing is different in at least two ways:",
"replace the spool, I'd like to hang most of my",
"my spools on the wall, where they can rotate, and",
"placed at some distance from the extruder, and at various",
"tube](http://www.amazon.co.uk/dp/B01CVKM62Q) to reach the printer. I know such tubes are",
"to make sure the filament is pulled from the spool",
"the problems I am not foreseeing? --- **Edit 1:** I",
"from the extruder, and at various angles. So to make",
"small room, and I thought I'd come up with a",
"where they can rotate, and only swap filament leads in",
"plan feasible? Or are the problems I am not foreseeing?",
"sure it is feasible. Rather than physically replace the spool,",
"*pulling* (not *pushing*) filament through the tube and **[2]** the",
"**Edit 1:** I don't know where I got 1-2 meters",
"foreseeing? --- **Edit 1:** I don't know where I got",
"Or are the problems I am not foreseeing? --- **Edit",
"extruder. The spools would be placed at some distance from",
"to reach the printer. I know such tubes are used",
"So to make sure the filament is pulled from the",
"the spool at the proper angle, and to avoid breaking",
"different in at least two ways: **[1]** the extruder motor",
"the (direct drive) extruder. The spools would be placed at",
"Is this plan feasible? Or are the problems I am",
"be placed at some distance from the extruder, and at",
"I'm proposing is different in at least two ways: **[1]**",
"closer to 50cm. **Edit 2:** To clarify my proposed setup,",
"distance is actually closer to 50cm. **Edit 2:** To clarify",
"in a small room, and I thought I'd come up",
"spool at the proper angle, and to avoid breaking it,",
"I think it should probably run through a [flexible tube](http://www.amazon.co.uk/dp/B01CVKM62Q)",
"sure the filament is pulled from the spool at the",
"and only swap filament leads in the (direct drive) extruder.",
"it is feasible. Rather than physically replace the spool, I'd",
"The spools would be placed at some distance from the",
"through a [flexible tube](http://www.amazon.co.uk/dp/B01CVKM62Q) to reach the printer. I know",
"angle, and to avoid breaking it, I think it should",
"thought I'd come up with a system for more easily",
"a [flexible tube](http://www.amazon.co.uk/dp/B01CVKM62Q) to reach the printer. I know such",
"up my printer in a small room, and I thought",
"system for more easily swapping filaments, but I'm not yet",
"it, I think it should probably run through a [flexible",
"filament leads in the (direct drive) extruder. The spools would",
"**[2]** the tube would be longer than normal, e.g., between",
"filaments, but I'm not yet sure it is feasible. Rather",
"extruder, and at various angles. So to make sure the",
"I'm setting up my printer in a small room, and",
"is pulled from the spool at the proper angle, and",
"am not foreseeing? --- **Edit 1:** I don't know where",
"The distance is actually closer to 50cm. **Edit 2:** To",
"reach the printer. I know such tubes are used for",
"1:** I don't know where I got 1-2 meters from.",
"the wall, where they can rotate, and only swap filament",
"in at least two ways: **[1]** the extruder motor would",
"like to hang most of my spools on the wall,",
"(not *pushing*) filament through the tube and **[2]** the tube",
"this plan feasible? Or are the problems I am not",
"it should probably run through a [flexible tube](http://www.amazon.co.uk/dp/B01CVKM62Q) to reach",
"and **[2]** the tube would be longer than normal, e.g.,",
"filament through the tube and **[2]** the tube would be",
"Rather than physically replace the spool, I'd like to hang",
"for Bowden style extruders, but what I'm proposing is different",
"with a system for more easily swapping filaments, but I'm",
"**[1]** the extruder motor would be *pulling* (not *pushing*) filament",
"distance from the extruder, and at various angles. So to",
"the tube and **[2]** the tube would be longer than",
"hang most of my spools on the wall, where they",
"[flexible tube](http://www.amazon.co.uk/dp/B01CVKM62Q) to reach the printer. I know such tubes",
"least two ways: **[1]** the extruder motor would be *pulling*",
"for more easily swapping filaments, but I'm not yet sure",
"most of my spools on the wall, where they can",
"50cm. **Edit 2:** To clarify my proposed setup, here's a",
"got 1-2 meters from. The distance is actually closer to",
"the spool, I'd like to hang most of my spools",
"I'm not yet sure it is feasible. Rather than physically",
"come up with a system for more easily swapping filaments,",
"where I got 1-2 meters from. The distance is actually",
"more easily swapping filaments, but I'm not yet sure it",
"longer than normal, e.g., between 1 and 2 meters. Is",
"proposing is different in at least two ways: **[1]** the",
"filament is pulled from the spool at the proper angle,",
"setting up my printer in a small room, and I",
"of my spools on the wall, where they can rotate,",
"2 meters. Is this plan feasible? Or are the problems",
"probably run through a [flexible tube](http://www.amazon.co.uk/dp/B01CVKM62Q) to reach the printer.",
"not foreseeing? --- **Edit 1:** I don't know where I",
"*pushing*) filament through the tube and **[2]** the tube would",
"such tubes are used for Bowden style extruders, but what",
"at the proper angle, and to avoid breaking it, I",
"tubes are used for Bowden style extruders, but what I'm",
"swap filament leads in the (direct drive) extruder. The spools",
"physically replace the spool, I'd like to hang most of",
"rotate, and only swap filament leads in the (direct drive)",
"extruders, but what I'm proposing is different in at least",
"two ways: **[1]** the extruder motor would be *pulling* (not",
"through the tube and **[2]** the tube would be longer",
"would be *pulling* (not *pushing*) filament through the tube and",
"would be longer than normal, e.g., between 1 and 2",
"I'd like to hang most of my spools on the",
"can rotate, and only swap filament leads in the (direct",
"ways: **[1]** the extruder motor would be *pulling* (not *pushing*)",
"the filament is pulled from the spool at the proper",
"some distance from the extruder, and at various angles. So",
"style extruders, but what I'm proposing is different in at",
"feasible. Rather than physically replace the spool, I'd like to",
"are the problems I am not foreseeing? --- **Edit 1:**",
"normal, e.g., between 1 and 2 meters. Is this plan",
"easily swapping filaments, but I'm not yet sure it is",
"but I'm not yet sure it is feasible. Rather than",
"be *pulling* (not *pushing*) filament through the tube and **[2]**",
"the tube would be longer than normal, e.g., between 1",
"I thought I'd come up with a system for more",
"know such tubes are used for Bowden style extruders, but",
"drive) extruder. The spools would be placed at some distance",
"would be placed at some distance from the extruder, and",
"at some distance from the extruder, and at various angles.",
"angles. So to make sure the filament is pulled from",
"used for Bowden style extruders, but what I'm proposing is",
"to hang most of my spools on the wall, where",
"run through a [flexible tube](http://www.amazon.co.uk/dp/B01CVKM62Q) to reach the printer. I",
"is feasible. Rather than physically replace the spool, I'd like",
"to avoid breaking it, I think it should probably run",
"the extruder motor would be *pulling* (not *pushing*) filament through",
"than normal, e.g., between 1 and 2 meters. Is this",
"problems I am not foreseeing? --- **Edit 1:** I don't",
"wall, where they can rotate, and only swap filament leads",
"and 2 meters. Is this plan feasible? Or are the",
"--- **Edit 1:** I don't know where I got 1-2",
"Bowden style extruders, but what I'm proposing is different in",
"make sure the filament is pulled from the spool at",
"yet sure it is feasible. Rather than physically replace the",
"a small room, and I thought I'd come up with",
"to 50cm. **Edit 2:** To clarify my proposed setup, here's",
"motor would be *pulling* (not *pushing*) filament through the tube",
"printer in a small room, and I thought I'd come",
"at least two ways: **[1]** the extruder motor would be",
"I got 1-2 meters from. The distance is actually closer",
"only swap filament leads in the (direct drive) extruder. The",
"1 and 2 meters. Is this plan feasible? Or are",
"a system for more easily swapping filaments, but I'm not",
"2:** To clarify my proposed setup, here's a crude mockup:",
"not yet sure it is feasible. Rather than physically replace",
"the printer. I know such tubes are used for Bowden",
"at various angles. So to make sure the filament is",
"tube would be longer than normal, e.g., between 1 and",
"is actually closer to 50cm. **Edit 2:** To clarify my",
"various angles. So to make sure the filament is pulled",
"think it should probably run through a [flexible tube](http://www.amazon.co.uk/dp/B01CVKM62Q) to",
"they can rotate, and only swap filament leads in the",
"feasible? Or are the problems I am not foreseeing? ---",
"be longer than normal, e.g., between 1 and 2 meters.",
"printer. I know such tubes are used for Bowden style",
"pulled from the spool at the proper angle, and to",
"is different in at least two ways: **[1]** the extruder",
"than physically replace the spool, I'd like to hang most",
"the proper angle, and to avoid breaking it, I think",
"the extruder, and at various angles. So to make sure",
"from the spool at the proper angle, and to avoid",
"tube and **[2]** the tube would be longer than normal,",
"up with a system for more easily swapping filaments, but",
"actually closer to 50cm. **Edit 2:** To clarify my proposed",
"and I thought I'd come up with a system for",
"are used for Bowden style extruders, but what I'm proposing",
"I am not foreseeing? --- **Edit 1:** I don't know",
"my printer in a small room, and I thought I'd",
"but what I'm proposing is different in at least two",
"1-2 meters from. The distance is actually closer to 50cm.",
"meters from. The distance is actually closer to 50cm. **Edit",
"breaking it, I think it should probably run through a",
"on the wall, where they can rotate, and only swap",
"between 1 and 2 meters. Is this plan feasible? Or",
"know where I got 1-2 meters from. The distance is",
"should probably run through a [flexible tube](http://www.amazon.co.uk/dp/B01CVKM62Q) to reach the",
"and at various angles. So to make sure the filament",
"room, and I thought I'd come up with a system",
"spools would be placed at some distance from the extruder,",
"proper angle, and to avoid breaking it, I think it",
"and to avoid breaking it, I think it should probably",
"don't know where I got 1-2 meters from. The distance",
"I'd come up with a system for more easily swapping",
"leads in the (direct drive) extruder. The spools would be",
"(direct drive) extruder. The spools would be placed at some",
"avoid breaking it, I think it should probably run through",
"e.g., between 1 and 2 meters. Is this plan feasible?",
"in the (direct drive) extruder. The spools would be placed",
"spool, I'd like to hang most of my spools on",
"swapping filaments, but I'm not yet sure it is feasible.",
"meters. Is this plan feasible? Or are the problems I",
"**Edit 2:** To clarify my proposed setup, here's a crude",
"To clarify my proposed setup, here's a crude mockup: [](https://i.stack.imgur.com/nWcuk.png)",
"I know such tubes are used for Bowden style extruders,",
"spools on the wall, where they can rotate, and only",
"extruder motor would be *pulling* (not *pushing*) filament through the"
] |
[
"idea about CAD software. The perfect solution for me would",
"quadcopter as STL file](http://www.thingiverse.com/thing:1381474). It looks as follows. [. It looks as follows. [](https://i.stack.imgur.com/qcZOR.png)",
"surface must stay the same. Please suggest the easiest solution",
"exact same size? Additionally the angle of the upper surface",
"image description here](https://i.stack.imgur.com/qcZOR.png)](https://i.stack.imgur.com/qcZOR.png) How do I modify it so that",
"it is wider and longer by a few millimeters but",
"a few millimeters but the screw holes stay the exact",
"it however I have no idea what the steps are.",
"file](http://www.thingiverse.com/thing:1381474). It looks as follows. [](https://i.stack.imgur.com/qcZOR.png) How",
"of the upper surface must stay the same. Please suggest",
"but the screw holes stay the exact same size? Additionally",
"same size? Additionally the angle of the upper surface must",
"easiest solution for someone like me who as no idea",
"so that it is wider and longer by a few",
"stay the exact same size? Additionally the angle of the",
"then modify it however I have no idea what the",
"this [GoPro mount for a quadcopter as STL file](http://www.thingiverse.com/thing:1381474). It",
"Additionally the angle of the upper surface must stay the",
"as follows. [](https://i.stack.imgur.com/qcZOR.png) How do I modify",
"me who as no idea about CAD software. The perfect",
"upper surface must stay the same. Please suggest the easiest",
"CAD software. The perfect solution for me would be to",
"Please suggest the easiest solution for someone like me who",
"as no idea about CAD software. The perfect solution for",
"Tinkercad and then modify it however I have no idea",
"[GoPro mount for a quadcopter as STL file](http://www.thingiverse.com/thing:1381474). It looks",
"the easiest solution for someone like me who as no",
"who as no idea about CAD software. The perfect solution",
"it so that it is wider and longer by a",
"me would be to just import it in Tinkercad and",
"screw holes stay the exact same size? Additionally the angle",
"about CAD software. The perfect solution for me would be",
"perfect solution for me would be to just import it",
"just import it in Tinkercad and then modify it however",
"here](https://i.stack.imgur.com/qcZOR.png)](https://i.stack.imgur.com/qcZOR.png) How do I modify it so that it is",
"it in Tinkercad and then modify it however I have",
"[](https://i.stack.imgur.com/qcZOR.png) How do I modify it so",
"How do I modify it so that it is wider",
"the angle of the upper surface must stay the same.",
"for someone like me who as no idea about CAD",
"no idea about CAD software. The perfect solution for me",
"wider and longer by a few millimeters but the screw",
"do I modify it so that it is wider and",
"holes stay the exact same size? Additionally the angle of",
"must stay the same. Please suggest the easiest solution for",
"the exact same size? Additionally the angle of the upper",
"modify it however I have no idea what the steps",
"that it is wider and longer by a few millimeters",
"few millimeters but the screw holes stay the exact same",
"a quadcopter as STL file](http://www.thingiverse.com/thing:1381474). It looks as follows. [. It looks as follows.",
"follows. [](https://i.stack.imgur.com/qcZOR.png) How do I modify it",
"solution for me would be to just import it in",
"have this [GoPro mount for a quadcopter as STL file](http://www.thingiverse.com/thing:1381474).",
"millimeters but the screw holes stay the exact same size?",
"looks as follows. [](https://i.stack.imgur.com/qcZOR.png) How do I",
"the upper surface must stay the same. Please suggest the",
"solution for someone like me who as no idea about",
"be to just import it in Tinkercad and then modify",
"stay the same. Please suggest the easiest solution for someone",
"to just import it in Tinkercad and then modify it",
"in Tinkercad and then modify it however I have no",
"as STL file](http://www.thingiverse.com/thing:1381474). It looks as follows. [](https://i.stack.imgur.com/qcZOR.png) How do",
"would be to just import it in Tinkercad and then",
"and longer by a few millimeters but the screw holes",
"someone like me who as no idea about CAD software.",
"description here](https://i.stack.imgur.com/qcZOR.png)](https://i.stack.imgur.com/qcZOR.png) How do I modify it so that it",
"suggest the easiest solution for someone like me who as",
"I have this [GoPro mount for a quadcopter as STL",
"mount for a quadcopter as STL file](http://www.thingiverse.com/thing:1381474). It looks as",
"the same. Please suggest the easiest solution for someone like",
"the screw holes stay the exact same size? Additionally the",
"size? Additionally the angle of the upper surface must stay",
"and then modify it however I have no idea what",
"like me who as no idea about CAD software. The"
] |
[
"extruder, and I am curious about the process of changing",
"the optimal solution is to someone 'cut' one end of",
"Is it possible to connect two pieces of 1.75 mm",
"process of changing filament while the 3-d printer extruder continues",
"the process of changing filament while the 3-d printer extruder",
"curious about the process of changing filament while the 3-d",
"at the optimal solution is to someone 'cut' one end",
"is to someone 'cut' one end of the filament and",
"the 3-d printer extruder continues uninterrupted. My current best-guess at",
"am asking the question because I am interested in creating",
"a multi-filament feeder to a single extruder, and I am",
"I am asking the question because I am interested in",
"I am interested in creating a multi-filament feeder to a",
"of changing filament while the 3-d printer extruder continues uninterrupted.",
"in creating a multi-filament feeder to a single extruder, and",
"mm filament end to end, with no change in width?",
"1.75 mm filament end to end, with no change in",
"about the process of changing filament while the 3-d printer",
"extruder continues uninterrupted. My current best-guess at the optimal solution",
"end to end, with no change in width? I am",
"My current best-guess at the optimal solution is to someone",
"two pieces of 1.75 mm filament end to end, with",
"changing filament while the 3-d printer extruder continues uninterrupted. My",
"current best-guess at the optimal solution is to someone 'cut'",
"because I am interested in creating a multi-filament feeder to",
"while the 3-d printer extruder continues uninterrupted. My current best-guess",
"filament and 'melt' it to the end of another filament.",
"connect two pieces of 1.75 mm filament end to end,",
"continues uninterrupted. My current best-guess at the optimal solution is",
"someone 'cut' one end of the filament and 'melt' it",
"multi-filament feeder to a single extruder, and I am curious",
"'cut' one end of the filament and 'melt' it to",
"3-d printer extruder continues uninterrupted. My current best-guess at the",
"end, with no change in width? I am asking the",
"solution is to someone 'cut' one end of the filament",
"one end of the filament and 'melt' it to the",
"of 1.75 mm filament end to end, with no change",
"with no change in width? I am asking the question",
"uninterrupted. My current best-guess at the optimal solution is to",
"end of the filament and 'melt' it to the end",
"to a single extruder, and I am curious about the",
"to end, with no change in width? I am asking",
"to someone 'cut' one end of the filament and 'melt'",
"asking the question because I am interested in creating a",
"to connect two pieces of 1.75 mm filament end to",
"filament end to end, with no change in width? I",
"interested in creating a multi-filament feeder to a single extruder,",
"it possible to connect two pieces of 1.75 mm filament",
"and I am curious about the process of changing filament",
"am interested in creating a multi-filament feeder to a single",
"in width? I am asking the question because I am",
"question because I am interested in creating a multi-filament feeder",
"I am curious about the process of changing filament while",
"single extruder, and I am curious about the process of",
"creating a multi-filament feeder to a single extruder, and I",
"pieces of 1.75 mm filament end to end, with no",
"feeder to a single extruder, and I am curious about",
"filament while the 3-d printer extruder continues uninterrupted. My current",
"change in width? I am asking the question because I",
"of the filament and 'melt' it to the end of",
"no change in width? I am asking the question because",
"the filament and 'melt' it to the end of another",
"am curious about the process of changing filament while the",
"best-guess at the optimal solution is to someone 'cut' one",
"optimal solution is to someone 'cut' one end of the",
"the question because I am interested in creating a multi-filament",
"printer extruder continues uninterrupted. My current best-guess at the optimal",
"width? I am asking the question because I am interested",
"a single extruder, and I am curious about the process",
"possible to connect two pieces of 1.75 mm filament end"
] |
[
"using a common FDM 3D printer? I am particularly interested",
"FDM 3D printer? I am particularly interested in the width",
"a common FDM 3D printer? I am particularly interested in",
"the width of bristles, closeness together of each bristle, and",
"interested in the width of bristles, closeness together of each",
"I am particularly interested in the width of bristles, closeness",
"print toothbrush bristles using a common FDM 3D printer? I",
"toothbrush bristles using a common FDM 3D printer? I am",
"bristles using a common FDM 3D printer? I am particularly",
"am particularly interested in the width of bristles, closeness together",
"closeness together of each bristle, and the flexibility of each",
"width of bristles, closeness together of each bristle, and the",
"Is it possible to print toothbrush bristles using a common",
"it possible to print toothbrush bristles using a common FDM",
"in the width of bristles, closeness together of each bristle,",
"particularly interested in the width of bristles, closeness together of",
"3D printer? I am particularly interested in the width of",
"printer? I am particularly interested in the width of bristles,",
"common FDM 3D printer? I am particularly interested in the",
"possible to print toothbrush bristles using a common FDM 3D",
"of bristles, closeness together of each bristle, and the flexibility",
"of each bristle, and the flexibility of each particular bristle.",
"bristles, closeness together of each bristle, and the flexibility of",
"to print toothbrush bristles using a common FDM 3D printer?",
"together of each bristle, and the flexibility of each particular"
] |
[
"I've never tried it nor have I seen it in",
"Resin printer (and the cheapest so far), I assume it",
"the size of beads to figurines to a standard sized",
"only seen pictures of its outputs that are [miniature things](http://www.iboxprinters.com/ibox-nano-1/).",
"(width, length, height) of the biggest possible object the iBox",
"to figurines to a standard sized pencil cup holder. **I",
"I'd like to be sure. **For example**, my 3D models",
"sized pencil cup holder. **I want to know in inches",
"3D models are of the size of beads to figurines",
"seen it in action in person so I'd like to",
"[iBox Nano](http://www.iboxprinters.com/) is the smallest public-production-available 3d Resin printer (and",
"nor have I seen it in action in person so",
"in action in person so I'd like to be sure.",
"public-production-available 3d Resin printer (and the cheapest so far), I",
"of its outputs that are [miniature things](http://www.iboxprinters.com/ibox-nano-1/). I've never tried",
"[miniature things](http://www.iboxprinters.com/ibox-nano-1/). I've never tried it nor have I seen",
"seen pictures of its outputs that are [miniature things](http://www.iboxprinters.com/ibox-nano-1/). I've",
"of the size of beads to figurines to a standard",
"example**, my 3D models are of the size of beads",
"far I've only seen pictures of its outputs that are",
"holder. **I want to know in inches or millimeters the",
"be sure. **For example**, my 3D models are of the",
"that are [miniature things](http://www.iboxprinters.com/ibox-nano-1/). I've never tried it nor have",
"to know in inches or millimeters the dimension (width, length,",
"a huge size limitation. So far I've only seen pictures",
"to a standard sized pencil cup holder. **I want to",
"huge size limitation. So far I've only seen pictures of",
"it nor have I seen it in action in person",
"action in person so I'd like to be sure. **For",
"or millimeters the dimension (width, length, height) of the biggest",
"size limitation. So far I've only seen pictures of its",
"pencil cup holder. **I want to know in inches or",
"height) of the biggest possible object the iBox Nano can",
"so I'd like to be sure. **For example**, my 3D",
"the smallest public-production-available 3d Resin printer (and the cheapest so",
"never tried it nor have I seen it in action",
"are [miniature things](http://www.iboxprinters.com/ibox-nano-1/). I've never tried it nor have I",
"tried it nor have I seen it in action in",
"length, height) of the biggest possible object the iBox Nano",
"it in action in person so I'd like to be",
"things](http://www.iboxprinters.com/ibox-nano-1/). I've never tried it nor have I seen it",
"is the smallest public-production-available 3d Resin printer (and the cheapest",
"like to be sure. **For example**, my 3D models are",
"Since [iBox Nano](http://www.iboxprinters.com/) is the smallest public-production-available 3d Resin printer",
"of the biggest possible object the iBox Nano can print.**",
"limitation. So far I've only seen pictures of its outputs",
"pictures of its outputs that are [miniature things](http://www.iboxprinters.com/ibox-nano-1/). I've never",
"millimeters the dimension (width, length, height) of the biggest possible",
"Nano](http://www.iboxprinters.com/) is the smallest public-production-available 3d Resin printer (and the",
"3d Resin printer (and the cheapest so far), I assume",
"**I want to know in inches or millimeters the dimension",
"in person so I'd like to be sure. **For example**,",
"standard sized pencil cup holder. **I want to know in",
"sure. **For example**, my 3D models are of the size",
"printer (and the cheapest so far), I assume it has",
"has a huge size limitation. So far I've only seen",
"So far I've only seen pictures of its outputs that",
"the cheapest so far), I assume it has a huge",
"have I seen it in action in person so I'd",
"dimension (width, length, height) of the biggest possible object the",
"figurines to a standard sized pencil cup holder. **I want",
"models are of the size of beads to figurines to",
"size of beads to figurines to a standard sized pencil",
"the dimension (width, length, height) of the biggest possible object",
"assume it has a huge size limitation. So far I've",
"my 3D models are of the size of beads to",
"smallest public-production-available 3d Resin printer (and the cheapest so far),",
"are of the size of beads to figurines to a",
"it has a huge size limitation. So far I've only",
"outputs that are [miniature things](http://www.iboxprinters.com/ibox-nano-1/). I've never tried it nor",
"know in inches or millimeters the dimension (width, length, height)",
"want to know in inches or millimeters the dimension (width,",
"inches or millimeters the dimension (width, length, height) of the",
"its outputs that are [miniature things](http://www.iboxprinters.com/ibox-nano-1/). I've never tried it",
"in inches or millimeters the dimension (width, length, height) of",
"person so I'd like to be sure. **For example**, my",
"cup holder. **I want to know in inches or millimeters",
"(and the cheapest so far), I assume it has a",
"to be sure. **For example**, my 3D models are of",
"beads to figurines to a standard sized pencil cup holder.",
"a standard sized pencil cup holder. **I want to know",
"I assume it has a huge size limitation. So far",
"so far), I assume it has a huge size limitation.",
"I've only seen pictures of its outputs that are [miniature",
"of beads to figurines to a standard sized pencil cup",
"cheapest so far), I assume it has a huge size",
"I seen it in action in person so I'd like",
"far), I assume it has a huge size limitation. So",
"**For example**, my 3D models are of the size of"
] |
[
"cons, between 3D printers with varying layouts for moving head",
"& cons, between 3D printers with varying layouts for moving",
"Head; * etc. In particular, what are their respective strengths,",
"layouts for moving head vs. moving build plate? Example layouts",
"varying layouts for moving head vs. moving build plate? Example",
"* XY Head; Z Bed; * XYZ Head; * etc.",
"particular, what are their respective strengths, weaknesses, specializations, maintenance considerations,",
"Z Bed; * XYZ Head; * etc. In particular, what",
"build plate? Example layouts would include: * X Head; YZ",
"pros & cons, between 3D printers with varying layouts for",
"head vs. moving build plate? Example layouts would include: *",
"with varying layouts for moving head vs. moving build plate?",
"would include: * X Head; YZ Bed; * XY Head;",
"3D printers with varying layouts for moving head vs. moving",
"* XYZ Head; * etc. In particular, what are their",
"Bed; * XYZ Head; * etc. In particular, what are",
"Bed; * XY Head; Z Bed; * XYZ Head; *",
"XY Head; Z Bed; * XYZ Head; * etc. In",
"are the differences, and pros & cons, between 3D printers",
"the differences, and pros & cons, between 3D printers with",
"XYZ Head; * etc. In particular, what are their respective",
"what are their respective strengths, weaknesses, specializations, maintenance considerations, etc.?",
"YZ Bed; * XY Head; Z Bed; * XYZ Head;",
"differences, and pros & cons, between 3D printers with varying",
"etc. In particular, what are their respective strengths, weaknesses, specializations,",
"plate? Example layouts would include: * X Head; YZ Bed;",
"include: * X Head; YZ Bed; * XY Head; Z",
"* X Head; YZ Bed; * XY Head; Z Bed;",
"Head; Z Bed; * XYZ Head; * etc. In particular,",
"Head; YZ Bed; * XY Head; Z Bed; * XYZ",
"* etc. In particular, what are their respective strengths, weaknesses,",
"moving build plate? Example layouts would include: * X Head;",
"X Head; YZ Bed; * XY Head; Z Bed; *",
"between 3D printers with varying layouts for moving head vs.",
"In particular, what are their respective strengths, weaknesses, specializations, maintenance",
"What are the differences, and pros & cons, between 3D",
"layouts would include: * X Head; YZ Bed; * XY",
"for moving head vs. moving build plate? Example layouts would",
"and pros & cons, between 3D printers with varying layouts",
"Example layouts would include: * X Head; YZ Bed; *",
"moving head vs. moving build plate? Example layouts would include:",
"vs. moving build plate? Example layouts would include: * X",
"printers with varying layouts for moving head vs. moving build"
] |
[
"have recently installed the E3D v6 hotend and titan extruder.",
"I have recently installed the E3D v6 hotend and titan",
"other issues, I noticed that there is no filament being",
"gear looked like it was going in the wrong direction.",
"is no filament being extruded. In addition, the gear looked",
"have a (HIC) version of the Prusa i3. I have",
"filament being extruded. In addition, the gear looked like it",
"recently installed the E3D v6 hotend and titan extruder. After",
"there is no filament being extruded. In addition, the gear",
"titan extruder. After fixing some other issues, I noticed that",
"being extruded. In addition, the gear looked like it was",
"issues, I noticed that there is no filament being extruded.",
"i3. I have recently installed the E3D v6 hotend and",
"of the Prusa i3. I have recently installed the E3D",
"the Prusa i3. I have recently installed the E3D v6",
"Prusa i3. I have recently installed the E3D v6 hotend",
"the E3D v6 hotend and titan extruder. After fixing some",
"some other issues, I noticed that there is no filament",
"addition, the gear looked like it was going in the",
"like it was going in the wrong direction. How can",
"E3D v6 hotend and titan extruder. After fixing some other",
"a (HIC) version of the Prusa i3. I have recently",
"v6 hotend and titan extruder. After fixing some other issues,",
"After fixing some other issues, I noticed that there is",
"extruder. After fixing some other issues, I noticed that there",
"installed the E3D v6 hotend and titan extruder. After fixing",
"I noticed that there is no filament being extruded. In",
"I have a (HIC) version of the Prusa i3. I",
"noticed that there is no filament being extruded. In addition,",
"In addition, the gear looked like it was going in",
"version of the Prusa i3. I have recently installed the",
"the gear looked like it was going in the wrong",
"hotend and titan extruder. After fixing some other issues, I",
"it was going in the wrong direction. How can I",
"that there is no filament being extruded. In addition, the",
"extruded. In addition, the gear looked like it was going",
"was going in the wrong direction. How can I fix",
"going in the wrong direction. How can I fix this?",
"no filament being extruded. In addition, the gear looked like",
"(HIC) version of the Prusa i3. I have recently installed",
"looked like it was going in the wrong direction. How",
"fixing some other issues, I noticed that there is no",
"and titan extruder. After fixing some other issues, I noticed"
] |
[
"Slic3r settings, maybe to much filament being extruded or is",
"this related to my Slic3r settings, maybe to much filament",
"I am using Slic3r to generate the GCode for my",
"using Slic3r to generate the GCode for my Marlin-based printer.",
"[](https://i.stack.imgur.com/jTyk1.jpg) [](https://i.stack.imgur.com/jTyk1.jpg) [](https://i.stack.imgur.com/jTyk1.jpg) [](https://i.stack.imgur.com/jTyk1.jpg) [](https://i.stack.imgur.com/jTyk1.jpg) [](https://i.stack.imgur.com/jTyk1.jpg) [](https://i.stack.imgur.com/J4Thr.jpg)",
"slic3r config if necessary. [](https://i.stack.imgur.com/jTyk1.jpg)",
"I can provide more pictures of messed up parts or",
"am using Slic3r to generate the GCode for my Marlin-based",
"Slic3r to generate the GCode for my Marlin-based printer. For",
"related to my Slic3r settings, maybe to much filament being",
"help is highly appreciated and I can provide more pictures",
"due to something else? Any help is highly appreciated and",
"config if necessary. [](https://i.stack.imgur.com/jTyk1.jpg) [![Another",
"to something else? Any help is highly appreciated and I",
"printer. For some reason with increasing height my print starts",
"act like this when there are small parts. Is this",
"settings, maybe to much filament being extruded or is this",
"to get messed up. On another part it starts to",
"highly appreciated and I can provide more pictures of messed",
"there are small parts. Is this related to my Slic3r",
"of messed up parts or slic3r config if necessary. [![The",
"Any help is highly appreciated and I can provide more",
"part it starts to act like this when there are",
"to act like this when there are small parts. Is",
"messed up parts or slic3r config if necessary. [![The filament",
"is highly appreciated and I can provide more pictures of",
"increasing height my print starts to get messed up. On",
"extruded or is this due to something else? Any help"
] |
[
"time the gear gets back around to the one spot,",
"it is because of the clogged teeth. I haven't changed",
"of the [extruder gear](https://craftunique.com/item/craftbot-extruder-gear) on its way into the hot",
"but each time the gear gets back around to the",
"and trying to melt the PLA off it, ideally without",
"materials in a long time. I've cleared several print head",
"around to the one spot, it seems to get stuck",
"and \"clicking\" instead of turning, and I suspect it is",
"melt the PLA off it, ideally without setting my house",
"was thinking of putting it in a toaster oven and",
"turning, and I suspect it is because of the clogged",
"the teeth of the [extruder gear](https://craftunique.com/item/craftbot-extruder-gear) on its way into",
"teeth. I haven't changed materials in a long time. I've",
"one spot, it seems to get stuck again. Are there",
"Are there any good ways to clean this gear? I",
"to the one spot, it seems to get stuck again.",
"I'm having issues with the gear becoming stuck and \"clicking\"",
"head clogs, but each time the gear gets back around",
"oven and trying to melt the PLA off it, ideally",
"[extruder gear](https://craftunique.com/item/craftbot-extruder-gear) on its way into the hot end. I'm",
"CraftBot original to print PLA, but some of the filament",
"good ways to clean this gear? I was thinking of",
"the PLA off it, ideally without setting my house on",
"it, ideally without setting my house on fire in the",
"gets back around to the one spot, it seems to",
"of the filament has become stuck in the teeth of",
"the gear becoming stuck and \"clicking\" instead of turning, and",
"clogs, but each time the gear gets back around to",
"cleared several print head clogs, but each time the gear",
"original to print PLA, but some of the filament has",
"clogged teeth. I haven't changed materials in a long time.",
"house on fire in the process. Anyone have better ideas?",
"I suspect it is because of the clogged teeth. I",
"without setting my house on fire in the process. Anyone",
"PLA, but some of the filament has become stuck in",
"gear becoming stuck and \"clicking\" instead of turning, and I",
"instead of turning, and I suspect it is because of",
"ways to clean this gear? I was thinking of putting",
"I'm using a CraftBot original to print PLA, but some",
"setting my house on fire in the process. Anyone have",
"a long time. I've cleared several print head clogs, but",
"become stuck in the teeth of the [extruder gear](https://craftunique.com/item/craftbot-extruder-gear) on",
"any good ways to clean this gear? I was thinking",
"some of the filament has become stuck in the teeth",
"in the teeth of the [extruder gear](https://craftunique.com/item/craftbot-extruder-gear) on its way",
"toaster oven and trying to melt the PLA off it,",
"clean this gear? I was thinking of putting it in",
"\"clicking\" instead of turning, and I suspect it is because",
"to clean this gear? I was thinking of putting it",
"thinking of putting it in a toaster oven and trying",
"get stuck again. Are there any good ways to clean",
"is because of the clogged teeth. I haven't changed materials",
"seems to get stuck again. Are there any good ways",
"ideally without setting my house on fire in the process.",
"the one spot, it seems to get stuck again. Are",
"using a CraftBot original to print PLA, but some of",
"its way into the hot end. I'm having issues with",
"hot end. I'm having issues with the gear becoming stuck",
"teeth of the [extruder gear](https://craftunique.com/item/craftbot-extruder-gear) on its way into the",
"print PLA, but some of the filament has become stuck",
"the filament has become stuck in the teeth of the",
"to get stuck again. Are there any good ways to",
"there any good ways to clean this gear? I was",
"stuck again. Are there any good ways to clean this",
"and I suspect it is because of the clogged teeth.",
"gear gets back around to the one spot, it seems",
"putting it in a toaster oven and trying to melt",
"my house on fire in the process. Anyone have better",
"becoming stuck and \"clicking\" instead of turning, and I suspect",
"of turning, and I suspect it is because of the",
"has become stuck in the teeth of the [extruder gear](https://craftunique.com/item/craftbot-extruder-gear)",
"stuck in the teeth of the [extruder gear](https://craftunique.com/item/craftbot-extruder-gear) on its",
"issues with the gear becoming stuck and \"clicking\" instead of",
"the hot end. I'm having issues with the gear becoming",
"of putting it in a toaster oven and trying to",
"having issues with the gear becoming stuck and \"clicking\" instead",
"gear](https://craftunique.com/item/craftbot-extruder-gear) on its way into the hot end. I'm having",
"each time the gear gets back around to the one",
"print head clogs, but each time the gear gets back",
"off it, ideally without setting my house on fire in",
"because of the clogged teeth. I haven't changed materials in",
"time. I've cleared several print head clogs, but each time",
"again. Are there any good ways to clean this gear?",
"it in a toaster oven and trying to melt the",
"suspect it is because of the clogged teeth. I haven't",
"with the gear becoming stuck and \"clicking\" instead of turning,",
"changed materials in a long time. I've cleared several print",
"trying to melt the PLA off it, ideally without setting",
"end. I'm having issues with the gear becoming stuck and",
"PLA off it, ideally without setting my house on fire",
"a toaster oven and trying to melt the PLA off",
"in a toaster oven and trying to melt the PLA",
"on its way into the hot end. I'm having issues",
"stuck and \"clicking\" instead of turning, and I suspect it",
"the clogged teeth. I haven't changed materials in a long",
"I haven't changed materials in a long time. I've cleared",
"to print PLA, but some of the filament has become",
"back around to the one spot, it seems to get",
"of the clogged teeth. I haven't changed materials in a",
"way into the hot end. I'm having issues with the",
"into the hot end. I'm having issues with the gear",
"it seems to get stuck again. Are there any good",
"gear? I was thinking of putting it in a toaster",
"I was thinking of putting it in a toaster oven",
"in a long time. I've cleared several print head clogs,",
"but some of the filament has become stuck in the",
"spot, it seems to get stuck again. Are there any",
"several print head clogs, but each time the gear gets",
"a CraftBot original to print PLA, but some of the",
"the gear gets back around to the one spot, it",
"filament has become stuck in the teeth of the [extruder",
"haven't changed materials in a long time. I've cleared several",
"the [extruder gear](https://craftunique.com/item/craftbot-extruder-gear) on its way into the hot end.",
"to melt the PLA off it, ideally without setting my",
"long time. I've cleared several print head clogs, but each",
"this gear? I was thinking of putting it in a",
"I've cleared several print head clogs, but each time the"
] |
[
"any simple way of creating tappered thread in OpenSCAD? I",
"tappered thread in OpenSCAD? I need something like 10 mm",
"in OpenSCAD? I need something like 10 mm in diameter",
"something like 10 mm in diameter at the end, 9",
"mm in diameter at the end, 9 at the top",
"in diameter at the end, 9 at the top and",
"of creating tappered thread in OpenSCAD? I need something like",
"end, 9 at the top and the height of 10",
"need something like 10 mm in diameter at the end,",
"Is there any simple way of creating tappered thread in",
"thread in OpenSCAD? I need something like 10 mm in",
"creating tappered thread in OpenSCAD? I need something like 10",
"way of creating tappered thread in OpenSCAD? I need something",
"like 10 mm in diameter at the end, 9 at",
"10 mm in diameter at the end, 9 at the",
"9 at the top and the height of 10 mm.",
"at the end, 9 at the top and the height",
"there any simple way of creating tappered thread in OpenSCAD?",
"the end, 9 at the top and the height of",
"I need something like 10 mm in diameter at the",
"diameter at the end, 9 at the top and the",
"OpenSCAD? I need something like 10 mm in diameter at",
"simple way of creating tappered thread in OpenSCAD? I need"
] |
[
"turning knobs that can be replaced by gears, with convenient",
"motor). I have the right motors and can easily obtain",
"direction? What would such conversion involve? Just recalibration to the",
"connect the drivers to the 3 axis of Prosi's electronics,",
"to the 3 axis of Prosi's electronics, optionally connect some",
"overcome the worst problem of converting Prosi to CNC: the",
"What would such conversion involve? Just recalibration to the new",
"manually controlled, but easily converted for driving by stepper motors",
"device is done. The problem is the rest - adapting",
"Prosi's electronics, optionally connect some driver of the spindle to",
"their software and hardware *can* be adapted. It's only a",
"but easily converted for driving by stepper motors (all 3",
"spindle to the extruder output (or just control it manually),",
"the flimsy mechanics not able to withstand stress and vibrations",
"a hobby multi-purpose device (lathe/mill/drill/grinder/cutter) which is manually controlled, but",
"couple each to a stepper motor). I have the right",
"stepper motors (all 3 axis are controlled by turning knobs",
"the new gear/leadscrew ratios, or something more involved, like editing",
"gears, with convenient mount to couple each to a stepper",
"adapted. It's only a matter of *how hard* it is.",
"easily converted for driving by stepper motors (all 3 axis",
"machine](https://i.stack.imgur.com/7zCMv.jpg)](https://i.stack.imgur.com/7zCMv.jpg) That is the way to overcome the worst problem",
"output (or just control it manually), and it seems the",
"only a matter of *how hard* it is. Does anyone",
"not able to withstand stress and vibrations of machining. Then",
"the 3 axis of Prosi's electronics, optionally connect some driver",
"the extruder output (or just control it manually), and it",
"can connect the drivers to the 3 axis of Prosi's",
"matter of *how hard* it is. Does anyone have any",
"That is the way to overcome the worst problem of",
"multi-purpose device (lathe/mill/drill/grinder/cutter) which is manually controlled, but easily converted",
"with convenient mount to couple each to a stepper motor).",
"experience in that direction? What would such conversion involve? Just",
"can easily obtain drivers for them. [](https://i.stack.imgur.com/7zCMv.jpg)",
"is the way to overcome the worst problem of converting",
"and can easily obtain drivers for them. [](https://i.stack.imgur.com/7zCMv.jpg) That is",
"of 3D printers being open source means their software and",
"done. The problem is the rest - adapting the software.",
"is. Does anyone have any experience in that direction? What",
"a matter of *how hard* it is. Does anyone have",
"[](https://i.stack.imgur.com/7zCMv.jpg) That is the",
"means their software and hardware *can* be adapted. It's only",
"hardware side of the device is done. The problem is",
"hard* it is. Does anyone have any experience in that",
"drivers to the 3 axis of Prosi's electronics, optionally connect",
"to purchase a hobby multi-purpose device (lathe/mill/drill/grinder/cutter) which is manually",
"driver of the spindle to the extruder output (or just",
"to the extruder output (or just control it manually), and",
"have an option to purchase a hobby multi-purpose device (lathe/mill/drill/grinder/cutter)",
"it is. Does anyone have any experience in that direction?",
"It's only a matter of *how hard* it is. Does",
"machining. Then I can connect the drivers to the 3",
"an option to purchase a hobby multi-purpose device (lathe/mill/drill/grinder/cutter) which",
"(all 3 axis are controlled by turning knobs that can",
"able to withstand stress and vibrations of machining. Then I",
"involve? Just recalibration to the new gear/leadscrew ratios, or something",
"is the rest - adapting the software. RepRap family of",
"connect some driver of the spindle to the extruder output",
"RepRap family of 3D printers being open source means their",
"each to a stepper motor). I have the right motors",
"sources to get rid of all the temperature safeguards and",
"to couple each to a stepper motor). I have the",
"seems the hardware side of the device is done. The",
"hardware *can* be adapted. It's only a matter of *how",
"flimsy mechanics not able to withstand stress and vibrations of",
"device (lathe/mill/drill/grinder/cutter) which is manually controlled, but easily converted for",
"motors and can easily obtain drivers for them. [](https://i.stack.imgur.com/7zCMv.jpg) That is the way to",
"by stepper motors (all 3 axis are controlled by turning",
"converting Prosi to CNC: the flimsy mechanics not able to",
"the software. RepRap family of 3D printers being open source",
"3 axis of Prosi's electronics, optionally connect some driver of",
"of the machine](https://i.stack.imgur.com/7zCMv.jpg)](https://i.stack.imgur.com/7zCMv.jpg) That is the way to overcome the",
"The problem is the rest - adapting the software. RepRap",
"like editing the sources to get rid of all the",
"editing the sources to get rid of all the temperature",
"of Prosi's electronics, optionally connect some driver of the spindle",
"the rest - adapting the software. RepRap family of 3D",
"in that direction? What would such conversion involve? Just recalibration",
"of *how hard* it is. Does anyone have any experience",
"gear/leadscrew ratios, or something more involved, like editing the sources",
"are controlled by turning knobs that can be replaced by",
"I have an option to purchase a hobby multi-purpose device",
"the machine](https://i.stack.imgur.com/7zCMv.jpg)](https://i.stack.imgur.com/7zCMv.jpg) That is the way to overcome the worst",
"problem is the rest - adapting the software. RepRap family",
"can be replaced by gears, with convenient mount to couple",
"of machining. Then I can connect the drivers to the",
"and hardware *can* be adapted. It's only a matter of",
"axis of Prosi's electronics, optionally connect some driver of the",
"optionally connect some driver of the spindle to the extruder",
"Just recalibration to the new gear/leadscrew ratios, or something more",
"easily obtain drivers for them. [](https://i.stack.imgur.com/7zCMv.jpg) That",
"side of the device is done. The problem is the",
"replaced by gears, with convenient mount to couple each to",
"it seems the hardware side of the device is done.",
"adapting the software. RepRap family of 3D printers being open",
"control it manually), and it seems the hardware side of",
"option to purchase a hobby multi-purpose device (lathe/mill/drill/grinder/cutter) which is",
"to the new gear/leadscrew ratios, or something more involved, like",
"I have the right motors and can easily obtain drivers",
"printers being open source means their software and hardware *can*",
"source means their software and hardware *can* be adapted. It's",
"ratios, or something more involved, like editing the sources to",
"of various configurations of the machine](https://i.stack.imgur.com/7zCMv.jpg)](https://i.stack.imgur.com/7zCMv.jpg) That is the way",
"Prosi to CNC: the flimsy mechanics not able to withstand",
"Does anyone have any experience in that direction? What would",
"withstand stress and vibrations of machining. Then I can connect",
"to CNC: the flimsy mechanics not able to withstand stress",
"- adapting the software. RepRap family of 3D printers being",
"recalibration to the new gear/leadscrew ratios, or something more involved,",
"the drivers to the 3 axis of Prosi's electronics, optionally",
"way to overcome the worst problem of converting Prosi to",
"it manually), and it seems the hardware side of the",
"controlled by turning knobs that can be replaced by gears,",
"worst problem of converting Prosi to CNC: the flimsy mechanics",
"get rid of all the temperature safeguards and the likes?",
"*can* be adapted. It's only a matter of *how hard*",
"configurations of the machine](https://i.stack.imgur.com/7zCMv.jpg)](https://i.stack.imgur.com/7zCMv.jpg) That is the way to overcome",
"purchase a hobby multi-purpose device (lathe/mill/drill/grinder/cutter) which is manually controlled,",
"rest - adapting the software. RepRap family of 3D printers",
"Then I can connect the drivers to the 3 axis",
"(lathe/mill/drill/grinder/cutter) which is manually controlled, but easily converted for driving",
"open source means their software and hardware *can* be adapted.",
"such conversion involve? Just recalibration to the new gear/leadscrew ratios,",
"a stepper motor). I have the right motors and can",
"stepper motor). I have the right motors and can easily",
"of the spindle to the extruder output (or just control",
"have any experience in that direction? What would such conversion",
"for driving by stepper motors (all 3 axis are controlled",
"any experience in that direction? What would such conversion involve?",
"I can connect the drivers to the 3 axis of",
"new gear/leadscrew ratios, or something more involved, like editing the"
] |
[
"way to fix the spool or future prints from this",
"we've had some rain here. Has the spool of PLA",
"for two months? Could that be the sole cause of",
"The print head gets clogged easily, and when the object",
"printer for all these weeks now. I'm sure it's been",
"been printing small quantities from a PLA filament spool on",
"remove it after each print, so this one spool has",
"fine two months ago are now difficult to re-print. The",
"are there other possible causes? Is there any way to",
"very brittle. Some structures that printed fine two months ago",
"or do I have to scrap it and get a",
"leave the filament installed rather than trying to remove it",
"filament spool on a Craftbot printer for about two months",
"trying to remove it after each print, so this one",
"the brittle prints, or are there other possible causes? Is",
"off if not handled gently. I'll admit to not following",
"be the sole cause of the brittle prints, or are",
"spool has just been sitting on the back of the",
"Has the spool of PLA been damaged just by leaving",
"to 1/8\" rods will easily snap off if not handled",
"possible causes? Is there any way to fix the spool",
"this one spool has just been sitting on the back",
"quite brittle and 1/4\" to 1/8\" rods will easily snap",
"sole cause of the brittle prints, or are there other",
"a PLA filament spool on a Craftbot printer for about",
"or future prints from this spool, or do I have",
"filament installed rather than trying to remove it after each",
"weeks now. I'm sure it's been humid some of the",
"Recently the printed objects have been coming out very brittle.",
"has just been sitting on the back of the printer",
"of PLA been damaged just by leaving it exposed to",
"PLA been damaged just by leaving it exposed to room",
"of the days, we've had some rain here. Has the",
"storage of PLA. It's much easier to just leave the",
"days, we've had some rain here. Has the spool of",
"1/4\" to 1/8\" rods will easily snap off if not",
"if not handled gently. I'll admit to not following the",
"here. Has the spool of PLA been damaged just by",
"small quantities from a PLA filament spool on a Craftbot",
"causes? Is there any way to fix the spool or",
"not following the precautions for storage of PLA. It's much",
"there other possible causes? Is there any way to fix",
"PLA filament spool on a Craftbot printer for about two",
"other possible causes? Is there any way to fix the",
"the precautions for storage of PLA. It's much easier to",
"print head gets clogged easily, and when the object does",
"brittle prints, or are there other possible causes? Is there",
"much easier to just leave the filament installed rather than",
"now difficult to re-print. The print head gets clogged easily,",
"one spool has just been sitting on the back of",
"some of the days, we've had some rain here. Has",
"the object does print, it's quite brittle and 1/4\" to",
"exposed to room air for two months? Could that be",
"after each print, so this one spool has just been",
"now. Recently the printed objects have been coming out very",
"a Craftbot printer for about two months now. Recently the",
"easily, and when the object does print, it's quite brittle",
"object does print, it's quite brittle and 1/4\" to 1/8\"",
"of PLA. It's much easier to just leave the filament",
"months? Could that be the sole cause of the brittle",
"I've been printing small quantities from a PLA filament spool",
"installed rather than trying to remove it after each print,",
"had some rain here. Has the spool of PLA been",
"It's much easier to just leave the filament installed rather",
"PLA. It's much easier to just leave the filament installed",
"so this one spool has just been sitting on the",
"the spool of PLA been damaged just by leaving it",
"been damaged just by leaving it exposed to room air",
"printed objects have been coming out very brittle. Some structures",
"just been sitting on the back of the printer for",
"leaving it exposed to room air for two months? Could",
"spool on a Craftbot printer for about two months now.",
"it's quite brittle and 1/4\" to 1/8\" rods will easily",
"does print, it's quite brittle and 1/4\" to 1/8\" rods",
"brittle and 1/4\" to 1/8\" rods will easily snap off",
"spool or future prints from this spool, or do I",
"been sitting on the back of the printer for all",
"objects have been coming out very brittle. Some structures that",
"from a PLA filament spool on a Craftbot printer for",
"the filament installed rather than trying to remove it after",
"these weeks now. I'm sure it's been humid some of",
"spool of PLA been damaged just by leaving it exposed",
"for about two months now. Recently the printed objects have",
"are now difficult to re-print. The print head gets clogged",
"the printer for all these weeks now. I'm sure it's",
"of the printer for all these weeks now. I'm sure",
"to not following the precautions for storage of PLA. It's",
"rather than trying to remove it after each print, so",
"to room air for two months? Could that be the",
"easily snap off if not handled gently. I'll admit to",
"difficult to re-print. The print head gets clogged easily, and",
"will easily snap off if not handled gently. I'll admit",
"I'll admit to not following the precautions for storage of",
"months now. Recently the printed objects have been coming out",
"snap off if not handled gently. I'll admit to not",
"the sole cause of the brittle prints, or are there",
"room air for two months? Could that be the sole",
"ago are now difficult to re-print. The print head gets",
"two months ago are now difficult to re-print. The print",
"out very brittle. Some structures that printed fine two months",
"been coming out very brittle. Some structures that printed fine",
"the days, we've had some rain here. Has the spool",
"print, it's quite brittle and 1/4\" to 1/8\" rods will",
"than trying to remove it after each print, so this",
"the printed objects have been coming out very brittle. Some",
"two months now. Recently the printed objects have been coming",
"print, so this one spool has just been sitting on",
"now. I'm sure it's been humid some of the days,",
"easier to just leave the filament installed rather than trying",
"admit to not following the precautions for storage of PLA.",
"all these weeks now. I'm sure it's been humid some",
"sure it's been humid some of the days, we've had",
"handled gently. I'll admit to not following the precautions for",
"just by leaving it exposed to room air for two",
"on a Craftbot printer for about two months now. Recently",
"printing small quantities from a PLA filament spool on a",
"spool, or do I have to scrap it and get",
"some rain here. Has the spool of PLA been damaged",
"have been coming out very brittle. Some structures that printed",
"back of the printer for all these weeks now. I'm",
"prints from this spool, or do I have to scrap",
"to re-print. The print head gets clogged easily, and when",
"to fix the spool or future prints from this spool,",
"Some structures that printed fine two months ago are now",
"gets clogged easily, and when the object does print, it's",
"clogged easily, and when the object does print, it's quite",
"following the precautions for storage of PLA. It's much easier",
"printer for about two months now. Recently the printed objects",
"prints, or are there other possible causes? Is there any",
"fix the spool or future prints from this spool, or",
"cause of the brittle prints, or are there other possible",
"rain here. Has the spool of PLA been damaged just",
"of the brittle prints, or are there other possible causes?",
"sitting on the back of the printer for all these",
"humid some of the days, we've had some rain here.",
"gently. I'll admit to not following the precautions for storage",
"each print, so this one spool has just been sitting",
"by leaving it exposed to room air for two months?",
"from this spool, or do I have to scrap it",
"future prints from this spool, or do I have to",
"do I have to scrap it and get a new",
"it exposed to room air for two months? Could that",
"on the back of the printer for all these weeks",
"there any way to fix the spool or future prints",
"structures that printed fine two months ago are now difficult",
"been humid some of the days, we've had some rain",
"the spool or future prints from this spool, or do",
"Could that be the sole cause of the brittle prints,",
"to remove it after each print, so this one spool",
"or are there other possible causes? Is there any way",
"that printed fine two months ago are now difficult to",
"it after each print, so this one spool has just",
"the back of the printer for all these weeks now.",
"I have to scrap it and get a new spool?",
"1/8\" rods will easily snap off if not handled gently.",
"not handled gently. I'll admit to not following the precautions",
"coming out very brittle. Some structures that printed fine two",
"any way to fix the spool or future prints from",
"Is there any way to fix the spool or future",
"precautions for storage of PLA. It's much easier to just",
"brittle. Some structures that printed fine two months ago are",
"for storage of PLA. It's much easier to just leave",
"air for two months? Could that be the sole cause",
"it's been humid some of the days, we've had some",
"this spool, or do I have to scrap it and",
"printed fine two months ago are now difficult to re-print.",
"when the object does print, it's quite brittle and 1/4\"",
"head gets clogged easily, and when the object does print,",
"damaged just by leaving it exposed to room air for",
"I'm sure it's been humid some of the days, we've",
"months ago are now difficult to re-print. The print head",
"quantities from a PLA filament spool on a Craftbot printer",
"and when the object does print, it's quite brittle and",
"to just leave the filament installed rather than trying to",
"for all these weeks now. I'm sure it's been humid",
"rods will easily snap off if not handled gently. I'll",
"and 1/4\" to 1/8\" rods will easily snap off if",
"two months? Could that be the sole cause of the",
"about two months now. Recently the printed objects have been",
"just leave the filament installed rather than trying to remove",
"re-print. The print head gets clogged easily, and when the",
"that be the sole cause of the brittle prints, or",
"Craftbot printer for about two months now. Recently the printed"
] |
[
"but I'm looking to use it again. What should I",
"So I have a self build Mendel Reprap style 3d",
"What should I pay attention to before calibrating and running",
"Mendel Reprap style 3d printer. I've not used it in",
"house but I'm looking to use it again. What should",
"should I pay attention to before calibrating and running it",
"in sometime after moving house but I'm looking to use",
"style 3d printer. I've not used it in sometime after",
"Reprap style 3d printer. I've not used it in sometime",
"use it again. What should I pay attention to before",
"have a self build Mendel Reprap style 3d printer. I've",
"printer. I've not used it in sometime after moving house",
"a self build Mendel Reprap style 3d printer. I've not",
"to use it again. What should I pay attention to",
"I have a self build Mendel Reprap style 3d printer.",
"after moving house but I'm looking to use it again.",
"3d printer. I've not used it in sometime after moving",
"self build Mendel Reprap style 3d printer. I've not used",
"build Mendel Reprap style 3d printer. I've not used it",
"it again. What should I pay attention to before calibrating",
"not used it in sometime after moving house but I'm",
"again. What should I pay attention to before calibrating and",
"moving house but I'm looking to use it again. What",
"I pay attention to before calibrating and running it again?",
"sometime after moving house but I'm looking to use it",
"I've not used it in sometime after moving house but",
"it in sometime after moving house but I'm looking to",
"used it in sometime after moving house but I'm looking",
"looking to use it again. What should I pay attention",
"I'm looking to use it again. What should I pay"
] |
[
"brittle prints. I know about suggestions to heat the water",
"knows the filament had too much exposure to humidity when",
"my filament will face the same problem when I will",
"when I will use them again, I wanted to know",
"of water that has ben incorporated to PLA filament from",
"some of my filament will face the same problem when",
"rid of water that has ben incorporated to PLA filament",
"fact that some of my filament will face the same",
"the filament at a temperature well below the glass transition",
"problem when I will use them again, I wanted to",
"PLA filament from humidity? One knows the filament had too",
"of my filament will face the same problem when I",
"when hearing tiny puffs during extrusion and/or more brittle prints.",
"extrusion and/or more brittle prints. I know about suggestions to",
"I know about suggestions to heat the water out of",
"had too much exposure to humidity when hearing tiny puffs",
"Inspired by another question and due to the fact that",
"during extrusion and/or more brittle prints. I know about suggestions",
"of the filament at a temperature well below the glass",
"same problem when I will use them again, I wanted",
"will use them again, I wanted to know if there",
"I wanted to know if there are proven recipies to",
"will face the same problem when I will use them",
"the fact that some of my filament will face the",
"by another question and due to the fact that some",
"below the glass transition temperature, but can someone provide first",
"from humidity? One knows the filament had too much exposure",
"temperature, but can someone provide first hand knowledge or even",
"know about suggestions to heat the water out of the",
"out of the filament at a temperature well below the",
"temperature well below the glass transition temperature, but can someone",
"One knows the filament had too much exposure to humidity",
"question and due to the fact that some of my",
"to heat the water out of the filament at a",
"water out of the filament at a temperature well below",
"I will use them again, I wanted to know if",
"due to the fact that some of my filament will",
"filament will face the same problem when I will use",
"exposure to humidity when hearing tiny puffs during extrusion and/or",
"a temperature well below the glass transition temperature, but can",
"that has ben incorporated to PLA filament from humidity? One",
"hearing tiny puffs during extrusion and/or more brittle prints. I",
"filament from humidity? One knows the filament had too much",
"the glass transition temperature, but can someone provide first hand",
"more brittle prints. I know about suggestions to heat the",
"another question and due to the fact that some of",
"well below the glass transition temperature, but can someone provide",
"get rid of water that has ben incorporated to PLA",
"ben incorporated to PLA filament from humidity? One knows the",
"has ben incorporated to PLA filament from humidity? One knows",
"to humidity when hearing tiny puffs during extrusion and/or more",
"to know if there are proven recipies to get rid",
"humidity? One knows the filament had too much exposure to",
"to PLA filament from humidity? One knows the filament had",
"that some of my filament will face the same problem",
"incorporated to PLA filament from humidity? One knows the filament",
"the same problem when I will use them again, I",
"filament at a temperature well below the glass transition temperature,",
"the filament had too much exposure to humidity when hearing",
"but can someone provide first hand knowledge or even evidence?",
"much exposure to humidity when hearing tiny puffs during extrusion",
"wanted to know if there are proven recipies to get",
"use them again, I wanted to know if there are",
"there are proven recipies to get rid of water that",
"about suggestions to heat the water out of the filament",
"tiny puffs during extrusion and/or more brittle prints. I know",
"suggestions to heat the water out of the filament at",
"glass transition temperature, but can someone provide first hand knowledge",
"filament had too much exposure to humidity when hearing tiny",
"know if there are proven recipies to get rid of",
"water that has ben incorporated to PLA filament from humidity?",
"and due to the fact that some of my filament",
"again, I wanted to know if there are proven recipies",
"proven recipies to get rid of water that has ben",
"and/or more brittle prints. I know about suggestions to heat",
"the water out of the filament at a temperature well",
"too much exposure to humidity when hearing tiny puffs during",
"are proven recipies to get rid of water that has",
"face the same problem when I will use them again,",
"recipies to get rid of water that has ben incorporated",
"to the fact that some of my filament will face",
"transition temperature, but can someone provide first hand knowledge or",
"them again, I wanted to know if there are proven",
"puffs during extrusion and/or more brittle prints. I know about",
"prints. I know about suggestions to heat the water out",
"at a temperature well below the glass transition temperature, but",
"to get rid of water that has ben incorporated to",
"heat the water out of the filament at a temperature",
"humidity when hearing tiny puffs during extrusion and/or more brittle",
"if there are proven recipies to get rid of water"
] |
[
"is used inside, what safety precautions are necessary, which are",
"inside, what safety precautions are necessary, which are recommended, and/or",
"safety precautions are necessary, which are recommended, and/or which are",
"[XYZPrinting da-Vinci-1.0](http://us.xyzprinting.com/us_en/Product/da-Vinci-1.0) with ABS filament. I am concerned about ventilation.",
"filament. I am concerned about ventilation. If this is used",
"da-Vinci-1.0](http://us.xyzprinting.com/us_en/Product/da-Vinci-1.0) with ABS filament. I am concerned about ventilation. If",
"with ABS filament. I am concerned about ventilation. If this",
"about ventilation. If this is used inside, what safety precautions",
"I have the [XYZPrinting da-Vinci-1.0](http://us.xyzprinting.com/us_en/Product/da-Vinci-1.0) with ABS filament. I am",
"precautions are necessary, which are recommended, and/or which are optional?",
"I am concerned about ventilation. If this is used inside,",
"the [XYZPrinting da-Vinci-1.0](http://us.xyzprinting.com/us_en/Product/da-Vinci-1.0) with ABS filament. I am concerned about",
"this is used inside, what safety precautions are necessary, which",
"used inside, what safety precautions are necessary, which are recommended,",
"have the [XYZPrinting da-Vinci-1.0](http://us.xyzprinting.com/us_en/Product/da-Vinci-1.0) with ABS filament. I am concerned",
"If this is used inside, what safety precautions are necessary,",
"ventilation. If this is used inside, what safety precautions are",
"what safety precautions are necessary, which are recommended, and/or which",
"ABS filament. I am concerned about ventilation. If this is",
"am concerned about ventilation. If this is used inside, what",
"concerned about ventilation. If this is used inside, what safety"
] |
[
"or bracelet beads/charms, and whatever else I could think of",
"example of a metal filament that I found is this",
"Here's one for [Cooper PLA 1.75mm Filament](http://www.sainsmart.com/sainsmart-plated-copper-pla-1-75mm-filament-1kg-2-2lb-for-3d-printers.html?gclid=CjwKEAjwtLO7BRDax4-I4_6G71USJAA6FjN1VDu_t4Co-u949PfHWjVL0x6BD-I-4ZLRUEij0bhWLhoCSSbw_wcB). I would like",
"with a 3d printer and M3D is very affordable for",
"Filament](http://rads.stackoverflow.com/amzn/click/B00T76GLWE). Here's one for [Cooper PLA 1.75mm Filament](http://www.sainsmart.com/sainsmart-plated-copper-pla-1-75mm-filament-1kg-2-2lb-for-3d-printers.html?gclid=CjwKEAjwtLO7BRDax4-I4_6G71USJAA6FjN1VDu_t4Co-u949PfHWjVL0x6BD-I-4ZLRUEij0bhWLhoCSSbw_wcB). I would",
"how to work with a 3d printer and M3D is",
"didn't get any reply. If not M3D, can any other",
"I didn't get any reply. If not M3D, can any",
"a metal filament that I found is this [Silver PLA",
"other 3D Printer comparable to M3D do this? The MBot",
"the Micro can since the Pro is suppose to be",
"1.75mm Filament](http://www.sainsmart.com/sainsmart-plated-copper-pla-1-75mm-filament-1kg-2-2lb-for-3d-printers.html?gclid=CjwKEAjwtLO7BRDax4-I4_6G71USJAA6FjN1VDu_t4Co-u949PfHWjVL0x6BD-I-4ZLRUEij0bhWLhoCSSbw_wcB). I would like to make small sculptures or",
"I could think of making using metal. And, I'm asking",
"any other 3D Printer comparable to M3D do this? The",
"make small sculptures or bracelet beads/charms, and whatever else I",
"3D Printer comparable to M3D do this? The MBot Mini,",
"to 3d printing, I want to learn how to work",
"Pro hasn't come out yet but I assume it would",
"for [Cooper PLA 1.75mm Filament](http://www.sainsmart.com/sainsmart-plated-copper-pla-1-75mm-filament-1kg-2-2lb-for-3d-printers.html?gclid=CjwKEAjwtLO7BRDax4-I4_6G71USJAA6FjN1VDu_t4Co-u949PfHWjVL0x6BD-I-4ZLRUEij0bhWLhoCSSbw_wcB). I would like to make",
"And, I'm asking because I'm new to 3d printing, I",
"a 3d printer and M3D is very affordable for me.",
"Note that I've emailed M3D twice and I didn't get",
"to learn how to work with a 3d printer and",
"could think of making using metal. And, I'm asking because",
"I use a metal filament such as Copper, Zinc Alloy,",
"I found is this [Silver PLA 1.75mm Filament](http://rads.stackoverflow.com/amzn/click/B00T76GLWE). Here's one",
"the improvement edition.* An example of a metal filament that",
"buy*. Note that I've emailed M3D twice and I didn't",
"asking because I'm new to 3d printing, I want to",
"sure before I buy*. Note that I've emailed M3D twice",
"get any reply. If not M3D, can any other 3D",
"since the Pro is suppose to be the improvement edition.*",
"emailed M3D twice and I didn't get any reply. If",
"filament such as Copper, Zinc Alloy, Silver filaments on M3D",
"of making using metal. And, I'm asking because I'm new",
"to work with a 3d printer and M3D is very",
"bracelet beads/charms, and whatever else I could think of making",
"printer and M3D is very affordable for me. *So I'm",
"Zinc Alloy, Silver filaments on M3D Micro? *The Pro hasn't",
"[Silver PLA 1.75mm Filament](http://rads.stackoverflow.com/amzn/click/B00T76GLWE). Here's one for [Cooper PLA 1.75mm",
"is this [Silver PLA 1.75mm Filament](http://rads.stackoverflow.com/amzn/click/B00T76GLWE). Here's one for [Cooper",
"reply. If not M3D, can any other 3D Printer comparable",
"I assume it would if the Micro can since the",
"that I found is this [Silver PLA 1.75mm Filament](http://rads.stackoverflow.com/amzn/click/B00T76GLWE). Here's",
"found is this [Silver PLA 1.75mm Filament](http://rads.stackoverflow.com/amzn/click/B00T76GLWE). Here's one for",
"because I'm new to 3d printing, I want to learn",
"a metal filament such as Copper, Zinc Alloy, Silver filaments",
"1.75mm Filament](http://rads.stackoverflow.com/amzn/click/B00T76GLWE). Here's one for [Cooper PLA 1.75mm Filament](http://www.sainsmart.com/sainsmart-plated-copper-pla-1-75mm-filament-1kg-2-2lb-for-3d-printers.html?gclid=CjwKEAjwtLO7BRDax4-I4_6G71USJAA6FjN1VDu_t4Co-u949PfHWjVL0x6BD-I-4ZLRUEij0bhWLhoCSSbw_wcB). I",
"I'm new to 3d printing, I want to learn how",
"M3D is very affordable for me. *So I'm making sure",
"suppose to be the improvement edition.* An example of a",
"to make small sculptures or bracelet beads/charms, and whatever else",
"out yet but I assume it would if the Micro",
"I buy*. Note that I've emailed M3D twice and I",
"edition.* An example of a metal filament that I found",
"beads/charms, and whatever else I could think of making using",
"else I could think of making using metal. And, I'm",
"think of making using metal. And, I'm asking because I'm",
"metal filament that I found is this [Silver PLA 1.75mm",
"one for [Cooper PLA 1.75mm Filament](http://www.sainsmart.com/sainsmart-plated-copper-pla-1-75mm-filament-1kg-2-2lb-for-3d-printers.html?gclid=CjwKEAjwtLO7BRDax4-I4_6G71USJAA6FjN1VDu_t4Co-u949PfHWjVL0x6BD-I-4ZLRUEij0bhWLhoCSSbw_wcB). I would like to",
"sculptures or bracelet beads/charms, and whatever else I could think",
"as Copper, Zinc Alloy, Silver filaments on M3D Micro? *The",
"twice and I didn't get any reply. If not M3D,",
"metal filament such as Copper, Zinc Alloy, Silver filaments on",
"Silver filaments on M3D Micro? *The Pro hasn't come out",
"M3D twice and I didn't get any reply. If not",
"Can I use a metal filament such as Copper, Zinc",
"is very affordable for me. *So I'm making sure before",
"*The Pro hasn't come out yet but I assume it",
"if the Micro can since the Pro is suppose to",
"metal. And, I'm asking because I'm new to 3d printing,",
"improvement edition.* An example of a metal filament that I",
"before I buy*. Note that I've emailed M3D twice and",
"would if the Micro can since the Pro is suppose",
"work with a 3d printer and M3D is very affordable",
"filament that I found is this [Silver PLA 1.75mm Filament](http://rads.stackoverflow.com/amzn/click/B00T76GLWE).",
"it would if the Micro can since the Pro is",
"I'm making sure before I buy*. Note that I've emailed",
"but I assume it would if the Micro can since",
"use a metal filament such as Copper, Zinc Alloy, Silver",
"PLA 1.75mm Filament](http://www.sainsmart.com/sainsmart-plated-copper-pla-1-75mm-filament-1kg-2-2lb-for-3d-printers.html?gclid=CjwKEAjwtLO7BRDax4-I4_6G71USJAA6FjN1VDu_t4Co-u949PfHWjVL0x6BD-I-4ZLRUEij0bhWLhoCSSbw_wcB). I would like to make small sculptures",
"Micro can since the Pro is suppose to be the",
"to be the improvement edition.* An example of a metal",
"affordable for me. *So I'm making sure before I buy*.",
"PLA 1.75mm Filament](http://rads.stackoverflow.com/amzn/click/B00T76GLWE). Here's one for [Cooper PLA 1.75mm Filament](http://www.sainsmart.com/sainsmart-plated-copper-pla-1-75mm-filament-1kg-2-2lb-for-3d-printers.html?gclid=CjwKEAjwtLO7BRDax4-I4_6G71USJAA6FjN1VDu_t4Co-u949PfHWjVL0x6BD-I-4ZLRUEij0bhWLhoCSSbw_wcB).",
"of a metal filament that I found is this [Silver",
"making using metal. And, I'm asking because I'm new to",
"I want to learn how to work with a 3d",
"any reply. If not M3D, can any other 3D Printer",
"learn how to work with a 3d printer and M3D",
"be the improvement edition.* An example of a metal filament",
"I would like to make small sculptures or bracelet beads/charms,",
"using metal. And, I'm asking because I'm new to 3d",
"such as Copper, Zinc Alloy, Silver filaments on M3D Micro?",
"filaments on M3D Micro? *The Pro hasn't come out yet",
"Filament](http://www.sainsmart.com/sainsmart-plated-copper-pla-1-75mm-filament-1kg-2-2lb-for-3d-printers.html?gclid=CjwKEAjwtLO7BRDax4-I4_6G71USJAA6FjN1VDu_t4Co-u949PfHWjVL0x6BD-I-4ZLRUEij0bhWLhoCSSbw_wcB). I would like to make small sculptures or bracelet",
"3d printing, I want to learn how to work with",
"M3D, can any other 3D Printer comparable to M3D do",
"not M3D, can any other 3D Printer comparable to M3D",
"and M3D is very affordable for me. *So I'm making",
"and I didn't get any reply. If not M3D, can",
"can any other 3D Printer comparable to M3D do this?",
"for me. *So I'm making sure before I buy*. Note",
"printing, I want to learn how to work with a",
"and whatever else I could think of making using metal.",
"assume it would if the Micro can since the Pro",
"*So I'm making sure before I buy*. Note that I've",
"very affordable for me. *So I'm making sure before I",
"I'm asking because I'm new to 3d printing, I want",
"If not M3D, can any other 3D Printer comparable to",
"is suppose to be the improvement edition.* An example of",
"Alloy, Silver filaments on M3D Micro? *The Pro hasn't come",
"Micro? *The Pro hasn't come out yet but I assume",
"Pro is suppose to be the improvement edition.* An example",
"small sculptures or bracelet beads/charms, and whatever else I could",
"An example of a metal filament that I found is",
"3d printer and M3D is very affordable for me. *So",
"I've emailed M3D twice and I didn't get any reply.",
"making sure before I buy*. Note that I've emailed M3D",
"this [Silver PLA 1.75mm Filament](http://rads.stackoverflow.com/amzn/click/B00T76GLWE). Here's one for [Cooper PLA",
"new to 3d printing, I want to learn how to",
"hasn't come out yet but I assume it would if",
"come out yet but I assume it would if the",
"can since the Pro is suppose to be the improvement",
"[Cooper PLA 1.75mm Filament](http://www.sainsmart.com/sainsmart-plated-copper-pla-1-75mm-filament-1kg-2-2lb-for-3d-printers.html?gclid=CjwKEAjwtLO7BRDax4-I4_6G71USJAA6FjN1VDu_t4Co-u949PfHWjVL0x6BD-I-4ZLRUEij0bhWLhoCSSbw_wcB). I would like to make small",
"me. *So I'm making sure before I buy*. Note that",
"M3D Micro? *The Pro hasn't come out yet but I",
"the Pro is suppose to be the improvement edition.* An",
"want to learn how to work with a 3d printer",
"whatever else I could think of making using metal. And,",
"would like to make small sculptures or bracelet beads/charms, and",
"yet but I assume it would if the Micro can",
"Printer comparable to M3D do this? The MBot Mini, maybe?",
"Copper, Zinc Alloy, Silver filaments on M3D Micro? *The Pro",
"on M3D Micro? *The Pro hasn't come out yet but",
"like to make small sculptures or bracelet beads/charms, and whatever",
"that I've emailed M3D twice and I didn't get any"
] |
[
"it in order to make the shape that I want.",
"that I need actually. I know, how to control stepper",
"make a cartesian 3d printer. I don't have a printer",
"learn in order to let this 3d printer make this",
"the shape that I want. This is my question: what",
"but I don't know, how I can program it in",
"I search about that topic, but all what I found,",
"in order to let this 3d printer make this shapes?",
"I want. This is my question: what I need to",
"to learn in order to let this 3d printer make",
"I found, was the mechanical part of the 3d printer.",
"order to make the shape that I want. This is",
"3d printer. But I didn't find, how to program it",
"was the mechanical part of the 3d printer. But I",
"I didn't find, how to program it using arduino. I",
"printer. I don't have a printer yet, but I will",
"but I will buy all the components that I need",
"know, how I can program it in order to make",
"I need to learn in order to let this 3d",
"about that topic, but all what I found, was the",
"yet, but I will buy all the components that I",
"is my question: what I need to learn in order",
"But I didn't find, how to program it using arduino.",
"control stepper motors, but I don't know, how I can",
"that I want. This is my question: what I need",
"of the 3d printer. But I didn't find, how to",
"didn't find, how to program it using arduino. I want",
"to make the shape that I want. This is my",
"arduino. I want to make a cartesian 3d printer. I",
"motors, but I don't know, how I can program it",
"actually. I know, how to control stepper motors, but I",
"want to make a cartesian 3d printer. I don't have",
"all the components that I need actually. I know, how",
"to control stepper motors, but I don't know, how I",
"components that I need actually. I know, how to control",
"I don't have a printer yet, but I will buy",
"what I found, was the mechanical part of the 3d",
"3d printer. I don't have a printer yet, but I",
"I know, how to control stepper motors, but I don't",
"how I can program it in order to make the",
"my question: what I need to learn in order to",
"the components that I need actually. I know, how to",
"shape that I want. This is my question: what I",
"have a printer yet, but I will buy all the",
"need actually. I know, how to control stepper motors, but",
"all what I found, was the mechanical part of the",
"want. This is my question: what I need to learn",
"search about that topic, but all what I found, was",
"I will buy all the components that I need actually.",
"program it using arduino. I want to make a cartesian",
"part of the 3d printer. But I didn't find, how",
"how to control stepper motors, but I don't know, how",
"I don't know, how I can program it in order",
"program it in order to make the shape that I",
"question: what I need to learn in order to let",
"the 3d printer. But I didn't find, how to program",
"found, was the mechanical part of the 3d printer. But",
"I can program it in order to make the shape",
"can program it in order to make the shape that",
"what I need to learn in order to let this",
"a printer yet, but I will buy all the components",
"cartesian 3d printer. I don't have a printer yet, but",
"make the shape that I want. This is my question:",
"to make a cartesian 3d printer. I don't have a",
"topic, but all what I found, was the mechanical part",
"how to program it using arduino. I want to make",
"This is my question: what I need to learn in",
"it using arduino. I want to make a cartesian 3d",
"don't know, how I can program it in order to",
"will buy all the components that I need actually. I",
"but all what I found, was the mechanical part of",
"I need actually. I know, how to control stepper motors,",
"printer. But I didn't find, how to program it using",
"a cartesian 3d printer. I don't have a printer yet,",
"in order to make the shape that I want. This",
"to program it using arduino. I want to make a",
"printer yet, but I will buy all the components that",
"need to learn in order to let this 3d printer",
"the mechanical part of the 3d printer. But I didn't",
"stepper motors, but I don't know, how I can program",
"mechanical part of the 3d printer. But I didn't find,",
"that topic, but all what I found, was the mechanical",
"I want to make a cartesian 3d printer. I don't",
"using arduino. I want to make a cartesian 3d printer.",
"find, how to program it using arduino. I want to",
"don't have a printer yet, but I will buy all",
"buy all the components that I need actually. I know,",
"know, how to control stepper motors, but I don't know,"
] |
[
"not available. Do I have to do some repairing first",
"have to do some repairing first or something similar? Or",
"in order to export a Magics Project to a STL",
"few parts (different STLs), moved them around in certain positions",
"is not available. Do I have to do some repairing",
"now I want to export this project into another STL,",
"be all grey, like this function is not available. Do",
"this function is not available. Do I have to do",
"around in certain positions and now I want to export",
"work. The export menu seems to be all grey, like",
"Do I have to do some repairing first or something",
"a few parts (different STLs), moved them around in certain",
"export this project into another STL, containing my recent work.",
"function is not available. Do I have to do some",
"grey, like this function is not available. Do I have",
"do some repairing first or something similar? Or Magics needs",
"them around in certain positions and now I want to",
"project into another STL, containing my recent work. The export",
"recent work. The export menu seems to be all grey,",
"and now I want to export this project into another",
"to export this project into another STL, containing my recent",
"The export menu seems to be all grey, like this",
"new project in Materialise Magics, added a few parts (different",
"export menu seems to be all grey, like this function",
"certain positions and now I want to export this project",
"in certain positions and now I want to export this",
"STL, containing my recent work. The export menu seems to",
"menu seems to be all grey, like this function is",
"Or Magics needs other software in order to export a",
"first or something similar? Or Magics needs other software in",
"parts (different STLs), moved them around in certain positions and",
"created a new project in Materialise Magics, added a few",
"project in Materialise Magics, added a few parts (different STLs),",
"repairing first or something similar? Or Magics needs other software",
"or something similar? Or Magics needs other software in order",
"to do some repairing first or something similar? Or Magics",
"to be all grey, like this function is not available.",
"(different STLs), moved them around in certain positions and now",
"other software in order to export a Magics Project to",
"into another STL, containing my recent work. The export menu",
"a new project in Materialise Magics, added a few parts",
"in Materialise Magics, added a few parts (different STLs), moved",
"I created a new project in Materialise Magics, added a",
"added a few parts (different STLs), moved them around in",
"Magics, added a few parts (different STLs), moved them around",
"this project into another STL, containing my recent work. The",
"STLs), moved them around in certain positions and now I",
"available. Do I have to do some repairing first or",
"some repairing first or something similar? Or Magics needs other",
"needs other software in order to export a Magics Project",
"all grey, like this function is not available. Do I",
"I want to export this project into another STL, containing",
"moved them around in certain positions and now I want",
"want to export this project into another STL, containing my",
"order to export a Magics Project to a STL file?",
"another STL, containing my recent work. The export menu seems",
"something similar? Or Magics needs other software in order to",
"Materialise Magics, added a few parts (different STLs), moved them",
"similar? Or Magics needs other software in order to export",
"software in order to export a Magics Project to a",
"my recent work. The export menu seems to be all",
"containing my recent work. The export menu seems to be",
"seems to be all grey, like this function is not",
"I have to do some repairing first or something similar?",
"positions and now I want to export this project into",
"Magics needs other software in order to export a Magics",
"like this function is not available. Do I have to"
] |
[
"enough stringy filament oozes comes out of the hotend \"right",
"As a result, what has been printed or about to",
"I am using the E3D v6 hotend with the titan",
"I go to do a test print, just enough stringy",
"printed get stuck together as it tries to do the",
"Everytime I go to do a test print, just enough",
"go to do a test print, just enough stringy filament",
"hotend with the titan extruder. Everytime I go to do",
"oozes out the little bit of filament before it prints....",
"idea why it oozes out the little bit of filament",
"to do a test print, just enough stringy filament oozes",
"up while some of the first layer is done. As",
"I have no idea why it oozes out the little",
"stringy filament oozes comes out of the hotend \"right before\"",
"about to be printed get stuck together as it tries",
"with the titan extruder. Everytime I go to do a",
"why it oozes out the little bit of filament before",
"comes out of the hotend \"right before\" it lays down",
"the E3D v6 hotend with the titan extruder. Everytime I",
"print, just enough stringy filament oozes comes out of the",
"it lays down the first layer. I have no idea",
"the first layer. I have no idea why it oozes",
"of filament before it prints.... The unwanted filament builds up",
"get stuck together as it tries to do the rest",
"printed or about to be printed get stuck together as",
"the first layer is done. As a result, what has",
"before it prints.... The unwanted filament builds up while some",
"prints.... The unwanted filament builds up while some of the",
"no idea why it oozes out the little bit of",
"first layer is done. As a result, what has been",
"result, what has been printed or about to be printed",
"or about to be printed get stuck together as it",
"be printed get stuck together as it tries to do",
"filament oozes comes out of the hotend \"right before\" it",
"tries to do the rest of the print.... [](https://i.stack.imgur.com/ezHBV.jpg)",
"just enough stringy filament oozes comes out of the hotend",
"down the first layer. I have no idea why it",
"has been printed or about to be printed get stuck",
"unwanted filament builds up while some of the first layer",
"have no idea why it oozes out the little bit",
"to do the rest of the print.... [![enter image description",
"to be printed get stuck together as it tries to",
"before\" it lays down the first layer. I have no",
"it tries to do the rest of the print.... [![enter",
"using the E3D v6 hotend with the titan extruder. Everytime",
"some of the first layer is done. As a result,",
"little bit of filament before it prints.... The unwanted filament",
"a test print, just enough stringy filament oozes comes out",
"a result, what has been printed or about to be",
"the titan extruder. Everytime I go to do a test",
"v6 hotend with the titan extruder. Everytime I go to",
"filament before it prints.... The unwanted filament builds up while",
"lays down the first layer. I have no idea why",
"hotend \"right before\" it lays down the first layer. I",
"stuck together as it tries to do the rest of",
"the hotend \"right before\" it lays down the first layer.",
"what has been printed or about to be printed get",
"bit of filament before it prints.... The unwanted filament builds",
"as it tries to do the rest of the print....",
"am using the E3D v6 hotend with the titan extruder.",
"done. As a result, what has been printed or about",
"it prints.... The unwanted filament builds up while some of",
"filament builds up while some of the first layer is",
"layer. I have no idea why it oozes out the",
"been printed or about to be printed get stuck together",
"extruder. Everytime I go to do a test print, just",
"builds up while some of the first layer is done.",
"The unwanted filament builds up while some of the first",
"test print, just enough stringy filament oozes comes out of",
"layer is done. As a result, what has been printed",
"\"right before\" it lays down the first layer. I have",
"is done. As a result, what has been printed or",
"of the first layer is done. As a result, what"
] |
[
"add as parameters. What costs per meter would you use?",
"on filament prices I add as parameters. What costs per",
"Craftbot Plus Craftware slicer estimates cost per job based on",
"\\$22 per kilogram for PLA and ABS. I paid \\$57",
"arrived at PLA = 6.6 cents per meter, ABS =",
"for feedback! I paid \\$22 per kilogram for PLA and",
"this for 1.75mm diameter filament and arrived at PLA =",
"estimates cost per job based on filament prices I add",
"to calculate this for 1.75mm diameter filament and arrived at",
"diameter filament and arrived at PLA = 6.6 cents per",
"meter. Edit: thanks for feedback! I paid \\$22 per kilogram",
"I paid \\$22 per kilogram for PLA and ABS. I",
"use? I created spreadsheets to calculate this for 1.75mm diameter",
"for 1.75mm diameter filament and arrived at PLA = 6.6",
"slicer estimates cost per job based on filament prices I",
"per meter would you use? I created spreadsheets to calculate",
"PLA and ABS. I paid \\$57 for .75 kilogram of",
"PET XT = 18.6 cents per meter. Edit: thanks for",
"= 18.6 cents per meter. Edit: thanks for feedback! I",
"for PLA and ABS. I paid \\$57 for .75 kilogram",
"I created spreadsheets to calculate this for 1.75mm diameter filament",
"PLA = 6.6 cents per meter, ABS = 6.1 and",
"I paid \\$57 for .75 kilogram of Colorfab XT Black.",
"meter, ABS = 6.1 and PET XT = 18.6 cents",
"job based on filament prices I add as parameters. What",
"parameters. What costs per meter would you use? I created",
"thanks for feedback! I paid \\$22 per kilogram for PLA",
"Plus Craftware slicer estimates cost per job based on filament",
"6.1 and PET XT = 18.6 cents per meter. Edit:",
"created spreadsheets to calculate this for 1.75mm diameter filament and",
"XT = 18.6 cents per meter. Edit: thanks for feedback!",
"would you use? I created spreadsheets to calculate this for",
"and arrived at PLA = 6.6 cents per meter, ABS",
"My Craftbot Plus Craftware slicer estimates cost per job based",
"cents per meter. Edit: thanks for feedback! I paid \\$22",
"as parameters. What costs per meter would you use? I",
"calculate this for 1.75mm diameter filament and arrived at PLA",
"at PLA = 6.6 cents per meter, ABS = 6.1",
"prices I add as parameters. What costs per meter would",
"1.75mm diameter filament and arrived at PLA = 6.6 cents",
"per meter, ABS = 6.1 and PET XT = 18.6",
"ABS = 6.1 and PET XT = 18.6 cents per",
"per kilogram for PLA and ABS. I paid \\$57 for",
"and ABS. I paid \\$57 for .75 kilogram of Colorfab",
"= 6.1 and PET XT = 18.6 cents per meter.",
"and PET XT = 18.6 cents per meter. Edit: thanks",
"18.6 cents per meter. Edit: thanks for feedback! I paid",
"I add as parameters. What costs per meter would you",
"paid \\$22 per kilogram for PLA and ABS. I paid",
"per meter. Edit: thanks for feedback! I paid \\$22 per",
"spreadsheets to calculate this for 1.75mm diameter filament and arrived",
"meter would you use? I created spreadsheets to calculate this",
"ABS. I paid \\$57 for .75 kilogram of Colorfab XT",
"per job based on filament prices I add as parameters.",
"filament prices I add as parameters. What costs per meter",
"= 6.6 cents per meter, ABS = 6.1 and PET",
"costs per meter would you use? I created spreadsheets to",
"kilogram for PLA and ABS. I paid \\$57 for .75",
"Edit: thanks for feedback! I paid \\$22 per kilogram for",
"filament and arrived at PLA = 6.6 cents per meter,",
"cost per job based on filament prices I add as",
"6.6 cents per meter, ABS = 6.1 and PET XT",
"cents per meter, ABS = 6.1 and PET XT =",
"based on filament prices I add as parameters. What costs",
"Craftware slicer estimates cost per job based on filament prices",
"feedback! I paid \\$22 per kilogram for PLA and ABS.",
"What costs per meter would you use? I created spreadsheets",
"you use? I created spreadsheets to calculate this for 1.75mm"
] |
[
"it happening. For some reason the things I print get",
"as the extrusions won't touch at all. I've double checked",
"it because I have no idea why is it happening.",
"like a mountain range growing on the print. It looks",
"printout will fall apart as the extrusions won't touch at",
"messy, like a mountain range growing on the print. It",
"is it happening. For some reason the things I print",
"looks like the printer is over-extruding just in some parts",
"the print. It looks like overflow but it can't be",
"way to solve it because I have no idea why",
"get really messy, like a mountain range growing on the",
"things I print get really messy, like a mountain range",
"extrusions won't touch at all. I've double checked my extruder",
"my nozzle width, all are set up correctly. The whole",
"all. I've double checked my extruder steps and my filament",
"a mountain range growing on the print. It looks like",
"because I'm already using 0.82 flow modifier and if I",
"why is it happening. For some reason the things I",
"over-extruding just in some parts of the print. [](https://i.stack.imgur.com/CgpKL.jpg)",
"print get really messy, like a mountain range growing on",
"is over-extruding just in some parts of the print. [![enter",
"can't be because I'm already using 0.82 flow modifier and",
"reason the things I print get really messy, like a",
"have a serious problem and I can't find a way",
"I'm already using 0.82 flow modifier and if I go",
"apart as the extrusions won't touch at all. I've double",
"really messy, like a mountain range growing on the print.",
"lower the printout will fall apart as the extrusions won't",
"serious problem and I can't find a way to solve",
"I have no idea why is it happening. For some",
"fall apart as the extrusions won't touch at all. I've",
"no idea why is it happening. For some reason the",
"0.82 flow modifier and if I go any lower the",
"my filament and also my nozzle width, all are set",
"just in some parts of the print. [![enter image description",
"growing on the print. It looks like overflow but it",
"overflow but it can't be because I'm already using 0.82",
"and if I go any lower the printout will fall",
"filament and also my nozzle width, all are set up",
"I've double checked my extruder steps and my filament and",
"thing looks like the printer is over-extruding just in some",
"on the print. It looks like overflow but it can't",
"whole thing looks like the printer is over-extruding just in",
"printer is over-extruding just in some parts of the print.",
"looks like overflow but it can't be because I'm already",
"can't find a way to solve it because I have",
"but it can't be because I'm already using 0.82 flow",
"steps and my filament and also my nozzle width, all",
"a way to solve it because I have no idea",
"also my nozzle width, all are set up correctly. The",
"correctly. The whole thing looks like the printer is over-extruding",
"the printer is over-extruding just in some parts of the",
"set up correctly. The whole thing looks like the printer",
"already using 0.82 flow modifier and if I go any",
"flow modifier and if I go any lower the printout",
"won't touch at all. I've double checked my extruder steps",
"mountain range growing on the print. It looks like overflow",
"my extruder steps and my filament and also my nozzle"
] |
[
"endstops (included the Z probe endstop) work in reverse mode,",
"It never does a **grid measurement** or a **2 points",
"but didn't work. Does anyone have the same issue, or",
"delta 3D printer (like Kossel mini) with a Z probe",
"a **grid measurement** or a **2 points mirror** measurement. I",
"for the Autobed leveling method. Specifically, it always starts measurement",
"or a **2 points mirror** measurement. I also tried to",
"RAMPS 1.4 board: * I configured the Repetier firmware with",
"also tried to re-upload the firmware with `EEPROM_MODE` to 0",
"deploy and RAMPS 1.4 board: * I configured the Repetier",
"mirror** measurement. I also tried to re-upload the firmware with",
"mode, so I reversed the endstops triggering option; * I",
"Finally I downloaded it and uploaded to my Mega 2560.",
"measurement of **3 Points** (with 3 probe repetition each) even",
"reversed the endstops triggering option; * I enabled *Z-probing* and",
"in reverse mode, so I reversed the endstops triggering option;",
"extruding) except for the Autobed leveling method. Specifically, it always",
"type of measurement. It never does a **grid measurement** or",
"printer (like Kossel mini) with a Z probe near the",
"I tested it inside Repetier-Host and all seems to work",
"3 probe repetition each) even if I change the type",
"measurement. I also tried to re-upload the firmware with `EEPROM_MODE`",
"work. Does anyone have the same issue, or can explain",
"I reversed the endstops triggering option; * I enabled *Z-probing*",
"triggering option; * I enabled *Z-probing* and set the `BED_LEVELING_METHOD`",
"set `Z_PROBE_REPETITIONS` to 3, and; * Finally I downloaded it",
"I downloaded it and uploaded to my Mega 2560. Then",
"Mega 2560. Then I tested it inside Repetier-Host and all",
"All my endstops (included the Z probe endstop) work in",
"if I change the type of measurement. It never does",
"tool; * All my endstops (included the Z probe endstop)",
"endstops triggering option; * I enabled *Z-probing* and set the",
"2560. Then I tested it inside Repetier-Host and all seems",
"and all seems to work well (homing, moving, extruding) except",
"Repetier-Host and all seems to work well (homing, moving, extruding)",
"firmware with `EEPROM_MODE` to 0 but didn't work. Does anyone",
"and; * Finally I downloaded it and uploaded to my",
"I change the type of measurement. It never does a",
"work well (homing, moving, extruding) except for the Autobed leveling",
"near the hotend with manual deploy and RAMPS 1.4 board:",
"Repetier firmware with the online tool; * All my endstops",
"*Z-probing* and set the `BED_LEVELING_METHOD` to 1 (n\\*n grid); *",
"I set `Z_PROBE_REPETITIONS` to 3, and; * Finally I downloaded",
"* I configured the Repetier firmware with the online tool;",
"to 3, and; * Finally I downloaded it and uploaded",
"to work well (homing, moving, extruding) except for the Autobed",
"my endstops (included the Z probe endstop) work in reverse",
"Specifically, it always starts measurement of **3 Points** (with 3",
"**2 points mirror** measurement. I also tried to re-upload the",
"leveling method. Specifically, it always starts measurement of **3 Points**",
"of measurement. It never does a **grid measurement** or a",
"mini) with a Z probe near the hotend with manual",
"with manual deploy and RAMPS 1.4 board: * I configured",
"(homing, moving, extruding) except for the Autobed leveling method. Specifically,",
"measurement. It never does a **grid measurement** or a **2",
"work in reverse mode, so I reversed the endstops triggering",
"enabled *Z-probing* and set the `BED_LEVELING_METHOD` to 1 (n\\*n grid);",
"3D printer (like Kossel mini) with a Z probe near",
"3, and; * Finally I downloaded it and uploaded to",
"option; * I enabled *Z-probing* and set the `BED_LEVELING_METHOD` to",
"1.4 board: * I configured the Repetier firmware with the",
"re-upload the firmware with `EEPROM_MODE` to 0 but didn't work.",
"a Z probe near the hotend with manual deploy and",
"the hotend with manual deploy and RAMPS 1.4 board: *",
"firmware with the online tool; * All my endstops (included",
"with `EEPROM_MODE` to 0 but didn't work. Does anyone have",
"didn't work. Does anyone have the same issue, or can",
"`Z_PROBE_REPETITIONS` to 3, and; * Finally I downloaded it and",
"the Repetier firmware with the online tool; * All my",
"manual deploy and RAMPS 1.4 board: * I configured the",
"endstop) work in reverse mode, so I reversed the endstops",
"always starts measurement of **3 Points** (with 3 probe repetition",
"well (homing, moving, extruding) except for the Autobed leveling method.",
"and uploaded to my Mega 2560. Then I tested it",
"* I set `Z_PROBE_REPETITIONS` to 3, and; * Finally I",
"tried to re-upload the firmware with `EEPROM_MODE` to 0 but",
"configured the Repetier firmware with the online tool; * All",
"probe endstop) work in reverse mode, so I reversed the",
"the Z probe endstop) work in reverse mode, so I",
"Then I tested it inside Repetier-Host and all seems to",
"and RAMPS 1.4 board: * I configured the Repetier firmware",
"repetition each) even if I change the type of measurement.",
"probe near the hotend with manual deploy and RAMPS 1.4",
"even if I change the type of measurement. It never",
"(included the Z probe endstop) work in reverse mode, so",
"the firmware with `EEPROM_MODE` to 0 but didn't work. Does",
"grid); * I set `Z_PROBE_REPETITIONS` to 3, and; * Finally",
"probe repetition each) even if I change the type of",
"set the `BED_LEVELING_METHOD` to 1 (n\\*n grid); * I set",
"the `BED_LEVELING_METHOD` to 1 (n\\*n grid); * I set `Z_PROBE_REPETITIONS`",
"and set the `BED_LEVELING_METHOD` to 1 (n\\*n grid); * I",
"Does anyone have the same issue, or can explain to",
"hotend with manual deploy and RAMPS 1.4 board: * I",
"(n\\*n grid); * I set `Z_PROBE_REPETITIONS` to 3, and; *",
"I also tried to re-upload the firmware with `EEPROM_MODE` to",
"* Finally I downloaded it and uploaded to my Mega",
"moving, extruding) except for the Autobed leveling method. Specifically, it",
"does a **grid measurement** or a **2 points mirror** measurement.",
"**grid measurement** or a **2 points mirror** measurement. I also",
"`BED_LEVELING_METHOD` to 1 (n\\*n grid); * I set `Z_PROBE_REPETITIONS` to",
"I enabled *Z-probing* and set the `BED_LEVELING_METHOD` to 1 (n\\*n",
"* All my endstops (included the Z probe endstop) work",
"to 1 (n\\*n grid); * I set `Z_PROBE_REPETITIONS` to 3,",
"I configured the Repetier firmware with the online tool; *",
"Points** (with 3 probe repetition each) even if I change",
"0 but didn't work. Does anyone have the same issue,",
"points mirror** measurement. I also tried to re-upload the firmware",
"it inside Repetier-Host and all seems to work well (homing,",
"a **2 points mirror** measurement. I also tried to re-upload",
"method. Specifically, it always starts measurement of **3 Points** (with",
"each) even if I change the type of measurement. It",
"board: * I configured the Repetier firmware with the online",
"so I reversed the endstops triggering option; * I enabled",
"Z probe near the hotend with manual deploy and RAMPS",
"inside Repetier-Host and all seems to work well (homing, moving,",
"all seems to work well (homing, moving, extruding) except for",
"with a Z probe near the hotend with manual deploy",
"to my Mega 2560. Then I tested it inside Repetier-Host",
"it and uploaded to my Mega 2560. Then I tested",
"to 0 but didn't work. Does anyone have the same",
"the same issue, or can explain to me why this",
"uploaded to my Mega 2560. Then I tested it inside",
"it always starts measurement of **3 Points** (with 3 probe",
"of **3 Points** (with 3 probe repetition each) even if",
"Autobed leveling method. Specifically, it always starts measurement of **3",
"1 (n\\*n grid); * I set `Z_PROBE_REPETITIONS` to 3, and;",
"tested it inside Repetier-Host and all seems to work well",
"(with 3 probe repetition each) even if I change the",
"Kossel mini) with a Z probe near the hotend with",
"homebuilt a delta 3D printer (like Kossel mini) with a",
"my Mega 2560. Then I tested it inside Repetier-Host and",
"reverse mode, so I reversed the endstops triggering option; *",
"**3 Points** (with 3 probe repetition each) even if I",
"I homebuilt a delta 3D printer (like Kossel mini) with",
"(like Kossel mini) with a Z probe near the hotend",
"the Autobed leveling method. Specifically, it always starts measurement of",
"same issue, or can explain to me why this happens?",
"change the type of measurement. It never does a **grid",
"with the online tool; * All my endstops (included the",
"seems to work well (homing, moving, extruding) except for the",
"starts measurement of **3 Points** (with 3 probe repetition each)",
"`EEPROM_MODE` to 0 but didn't work. Does anyone have the",
"online tool; * All my endstops (included the Z probe",
"downloaded it and uploaded to my Mega 2560. Then I",
"a delta 3D printer (like Kossel mini) with a Z",
"measurement** or a **2 points mirror** measurement. I also tried",
"the endstops triggering option; * I enabled *Z-probing* and set",
"except for the Autobed leveling method. Specifically, it always starts",
"the type of measurement. It never does a **grid measurement**",
"Z probe endstop) work in reverse mode, so I reversed",
"to re-upload the firmware with `EEPROM_MODE` to 0 but didn't",
"* I enabled *Z-probing* and set the `BED_LEVELING_METHOD` to 1",
"the online tool; * All my endstops (included the Z",
"never does a **grid measurement** or a **2 points mirror**",
"anyone have the same issue, or can explain to me",
"have the same issue, or can explain to me why"
] |
[
"``` **and this;** ``` // The position of the homing",
"hardware end-stops and stops there eventually. All I want 10",
"offset for Y axis. **Started with this;** ``` // Travel",
"#define MANUAL_X_HOME_POS 0 #define MANUAL_Y_HOME_POS 10 <<< (tested with 10",
"is going out of the standard 20x20 cm bed. The",
"switches #define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be",
"and rests on the hardware end-stops and stops there eventually.",
"#define MANUAL_Z_HOME_POS 0 ``` I have also played with the",
"MANUAL_Y_HOME_POS 10 <<< (tested with 10 or -10) #define MANUAL_Z_HOME_POS",
"below, but I couldn't even make any single mm difference",
"(tested with 10 or -10) #define MANUAL_Z_HOME_POS 0 ``` I",
"is stopping slightly off the y-axis when homing. It is",
"even make any single mm difference by homing. They are",
"goes and rests on the hardware end-stops and stops there",
"the question, here is my setup;** * Prusa i3 (with",
"**and this;** ``` // The position of the homing switches",
"// For deltabots this means top and center of the",
"// The position of the homing switches #define MANUAL_HOME_POSITIONS //",
"<<<< (tested with 190 and 210) #define Y_MIN_POS 0 #define",
"defined, MANUAL_*_HOME_POS below will be used //Manual homing switch locations:",
"is to convert my 3D printer into a chocolate printer.",
"off the y-axis when homing. It is going out of",
"code My main task is to convert my 3D printer",
"question, here is my setup;** * Prusa i3 (with mainboard",
"out of the standard 20x20 cm bed. The other X",
"So, I have played with the `#defines` explained below, but",
"homing switch locations: // For deltabots this means top and",
"where homing related values are mentioned but no joy there",
"210) #define Y_MIN_POS 0 #define Z_MAX_POS 200 #define Z_MIN_POS 0",
"``` I have also played with the **slicer tool (Repetier)**",
"and stops there eventually. All I want 10 mm offset",
"is homing. It goes and rests on the hardware end-stops",
"// Travel limits after homing #define X_MAX_POS 200 #define X_MIN_POS",
"began. Because, the new extruder is stopping slightly off the",
"X_MIN_POS 0 #define Y_MAX_POS 190 <<<< (tested with 190 and",
"Prusa i3 (with mainboard Mks Gen v1.2) * Repetier as",
"Gen v1.2) * Repetier as slicer * Marlin source code",
"200 #define X_MIN_POS 0 #define Y_MAX_POS 190 <<<< (tested with",
"printer is homing. It goes and rests on the hardware",
"mainboard Mks Gen v1.2) * Repetier as slicer * Marlin",
"`#defines` explained below, but I couldn't even make any single",
"below will be used //Manual homing switch locations: // For",
"standard 20x20 cm bed. The other X and Z axes",
"extruder is stopping slightly off the y-axis when homing. It",
"y-axis when homing. It is going out of the standard",
"any single mm difference by homing. They are all ignored",
"3D printer into a chocolate printer. I have replaced the",
"The position of the homing switches #define MANUAL_HOME_POSITIONS // If",
"have also played with the **slicer tool (Repetier)** settings where",
"rests on the hardware end-stops and stops there eventually. All",
"the **slicer tool (Repetier)** settings where homing related values are",
"#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used",
"the hardware end-stops and stops there eventually. All I want",
"Because, the new extruder is stopping slightly off the y-axis",
"printer into a chocolate printer. I have replaced the filament",
"it is there that my issue began. Because, the new",
"#define X_MIN_POS 0 #define Y_MAX_POS 190 <<<< (tested with 190",
"going out of the standard 20x20 cm bed. The other",
"If defined, MANUAL_*_HOME_POS below will be used //Manual homing switch",
"MANUAL_Z_HOME_POS 0 ``` I have also played with the **slicer",
"Z_MIN_POS 0 ``` **and this;** ``` // The position of",
"locations: // For deltabots this means top and center of",
"into a chocolate printer. I have replaced the filament extruder",
"or -10) #define MANUAL_Z_HOME_POS 0 ``` I have also played",
"also played with the **slicer tool (Repetier)** settings where homing",
"chocolate extruder. And it is there that my issue began.",
"MANUAL_*_HOME_POS below will be used //Manual homing switch locations: //",
"and center of the cartesian print volume. #define MANUAL_X_HOME_POS 0",
"**slicer tool (Repetier)** settings where homing related values are mentioned",
"the filament extruder with a chocolate extruder. And it is",
"when homing. It is going out of the standard 20x20",
"Y_MAX_POS 190 <<<< (tested with 190 and 210) #define Y_MIN_POS",
"my 3D printer into a chocolate printer. I have replaced",
"chocolate printer. I have replaced the filament extruder with a",
"Y axis. **Started with this;** ``` // Travel limits after",
"200 #define Z_MIN_POS 0 ``` **and this;** ``` // The",
"there eventually. All I want 10 mm offset for Y",
"X and Z axes are OK. So, I have played",
"OK. So, I have played with the `#defines` explained below,",
"that my issue began. Because, the new extruder is stopping",
"I want 10 mm offset for Y axis. **Started with",
"``` // Travel limits after homing #define X_MAX_POS 200 #define",
"and Z axes are OK. So, I have played with",
"make any single mm difference by homing. They are all",
"v1.2) * Repetier as slicer * Marlin source code My",
"ignored when the printer is homing. It goes and rests",
"want 10 mm offset for Y axis. **Started with this;**",
"after homing #define X_MAX_POS 200 #define X_MIN_POS 0 #define Y_MAX_POS",
"homing related values are mentioned but no joy there as",
"deltabots this means top and center of the cartesian print",
"* Prusa i3 (with mainboard Mks Gen v1.2) * Repetier",
"center of the cartesian print volume. #define MANUAL_X_HOME_POS 0 #define",
"all ignored when the printer is homing. It goes and",
"the printer is homing. It goes and rests on the",
"position of the homing switches #define MANUAL_HOME_POSITIONS // If defined,",
"of the cartesian print volume. #define MANUAL_X_HOME_POS 0 #define MANUAL_Y_HOME_POS",
"of the homing switches #define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS",
"be used //Manual homing switch locations: // For deltabots this",
"replaced the filament extruder with a chocolate extruder. And it",
"with the `#defines` explained below, but I couldn't even make",
"(tested with 190 and 210) #define Y_MIN_POS 0 #define Z_MAX_POS",
"volume. #define MANUAL_X_HOME_POS 0 #define MANUAL_Y_HOME_POS 10 <<< (tested with",
"Travel limits after homing #define X_MAX_POS 200 #define X_MIN_POS 0",
"#define Z_MAX_POS 200 #define Z_MIN_POS 0 ``` **and this;** ```",
"homing switches #define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will",
"source code My main task is to convert my 3D",
"mentioned but no joy there as well. Any input highly",
"limits after homing #define X_MAX_POS 200 #define X_MIN_POS 0 #define",
"task is to convert my 3D printer into a chocolate",
"bed. The other X and Z axes are OK. So,",
"with this;** ``` // Travel limits after homing #define X_MAX_POS",
"#define Z_MIN_POS 0 ``` **and this;** ``` // The position",
"<<< (tested with 10 or -10) #define MANUAL_Z_HOME_POS 0 ```",
"X_MAX_POS 200 #define X_MIN_POS 0 #define Y_MAX_POS 190 <<<< (tested",
"but I couldn't even make any single mm difference by",
"mm difference by homing. They are all ignored when the",
"(Repetier)** settings where homing related values are mentioned but no",
"#define MANUAL_Y_HOME_POS 10 <<< (tested with 10 or -10) #define",
"the `#defines` explained below, but I couldn't even make any",
"but no joy there as well. Any input highly appreciated.",
"The other X and Z axes are OK. So, I",
"values are mentioned but no joy there as well. Any",
"Repetier as slicer * Marlin source code My main task",
"20x20 cm bed. The other X and Z axes are",
"stops there eventually. All I want 10 mm offset for",
"Marlin source code My main task is to convert my",
"and 210) #define Y_MIN_POS 0 #define Z_MAX_POS 200 #define Z_MIN_POS",
"190 <<<< (tested with 190 and 210) #define Y_MIN_POS 0",
"MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //Manual",
"I have played with the `#defines` explained below, but I",
"switch locations: // For deltabots this means top and center",
"of the standard 20x20 cm bed. The other X and",
"means top and center of the cartesian print volume. #define",
"is my setup;** * Prusa i3 (with mainboard Mks Gen",
"there that my issue began. Because, the new extruder is",
"is there that my issue began. Because, the new extruder",
"have played with the `#defines` explained below, but I couldn't",
"``` // The position of the homing switches #define MANUAL_HOME_POSITIONS",
"10 <<< (tested with 10 or -10) #define MANUAL_Z_HOME_POS 0",
"extruder with a chocolate extruder. And it is there that",
"slicer * Marlin source code My main task is to",
"homing. It is going out of the standard 20x20 cm",
"explained below, but I couldn't even make any single mm",
"10 or -10) #define MANUAL_Z_HOME_POS 0 ``` I have also",
"cm bed. The other X and Z axes are OK.",
"the y-axis when homing. It is going out of the",
"(with mainboard Mks Gen v1.2) * Repetier as slicer *",
"with 190 and 210) #define Y_MIN_POS 0 #define Z_MAX_POS 200",
"on the hardware end-stops and stops there eventually. All I",
"other X and Z axes are OK. So, I have",
"with the **slicer tool (Repetier)** settings where homing related values",
"settings where homing related values are mentioned but no joy",
"to convert my 3D printer into a chocolate printer. I",
"stopping slightly off the y-axis when homing. It is going",
"top and center of the cartesian print volume. #define MANUAL_X_HOME_POS",
"the new extruder is stopping slightly off the y-axis when",
"by homing. They are all ignored when the printer is",
"played with the **slicer tool (Repetier)** settings where homing related",
"couldn't even make any single mm difference by homing. They",
"main task is to convert my 3D printer into a",
"190 and 210) #define Y_MIN_POS 0 #define Z_MAX_POS 200 #define",
"For deltabots this means top and center of the cartesian",
"are mentioned but no joy there as well. Any input",
"filament extruder with a chocolate extruder. And it is there",
"extruder. And it is there that my issue began. Because,",
"0 ``` **and this;** ``` // The position of the",
"as slicer * Marlin source code My main task is",
"single mm difference by homing. They are all ignored when",
"will be used //Manual homing switch locations: // For deltabots",
"eventually. All I want 10 mm offset for Y axis.",
"It goes and rests on the hardware end-stops and stops",
"difference by homing. They are all ignored when the printer",
"end-stops and stops there eventually. All I want 10 mm",
"are all ignored when the printer is homing. It goes",
"homing. They are all ignored when the printer is homing.",
"here is my setup;** * Prusa i3 (with mainboard Mks",
"with 10 or -10) #define MANUAL_Z_HOME_POS 0 ``` I have",
"with a chocolate extruder. And it is there that my",
"this;** ``` // The position of the homing switches #define",
"have replaced the filament extruder with a chocolate extruder. And",
"issue began. Because, the new extruder is stopping slightly off",
"10 mm offset for Y axis. **Started with this;** ```",
"a chocolate printer. I have replaced the filament extruder with",
"#define Y_MIN_POS 0 #define Z_MAX_POS 200 #define Z_MIN_POS 0 ```",
"**Started with this;** ``` // Travel limits after homing #define",
"when the printer is homing. It goes and rests on",
"They are all ignored when the printer is homing. It",
"All I want 10 mm offset for Y axis. **Started",
"are OK. So, I have played with the `#defines` explained",
"my issue began. Because, the new extruder is stopping slightly",
"It is going out of the standard 20x20 cm bed.",
"#define Y_MAX_POS 190 <<<< (tested with 190 and 210) #define",
"tool (Repetier)** settings where homing related values are mentioned but",
"And it is there that my issue began. Because, the",
"new extruder is stopping slightly off the y-axis when homing.",
"cartesian print volume. #define MANUAL_X_HOME_POS 0 #define MANUAL_Y_HOME_POS 10 <<<",
"0 ``` I have also played with the **slicer tool",
"printer. I have replaced the filament extruder with a chocolate",
"Mks Gen v1.2) * Repetier as slicer * Marlin source",
"this means top and center of the cartesian print volume.",
"setup;** * Prusa i3 (with mainboard Mks Gen v1.2) *",
"//Manual homing switch locations: // For deltabots this means top",
"MANUAL_X_HOME_POS 0 #define MANUAL_Y_HOME_POS 10 <<< (tested with 10 or",
"slightly off the y-axis when homing. It is going out",
"Z axes are OK. So, I have played with the",
"0 #define Z_MAX_POS 200 #define Z_MIN_POS 0 ``` **and this;**",
"homing #define X_MAX_POS 200 #define X_MIN_POS 0 #define Y_MAX_POS 190",
"0 #define Y_MAX_POS 190 <<<< (tested with 190 and 210)",
"print volume. #define MANUAL_X_HOME_POS 0 #define MANUAL_Y_HOME_POS 10 <<< (tested",
"for Y axis. **Started with this;** ``` // Travel limits",
"I have also played with the **slicer tool (Repetier)** settings",
"I have replaced the filament extruder with a chocolate extruder.",
"axes are OK. So, I have played with the `#defines`",
"i3 (with mainboard Mks Gen v1.2) * Repetier as slicer",
"used //Manual homing switch locations: // For deltabots this means",
"this;** ``` // Travel limits after homing #define X_MAX_POS 200",
"convert my 3D printer into a chocolate printer. I have",
"0 #define MANUAL_Y_HOME_POS 10 <<< (tested with 10 or -10)",
"I couldn't even make any single mm difference by homing.",
"played with the `#defines` explained below, but I couldn't even",
"a chocolate extruder. And it is there that my issue",
"homing. It goes and rests on the hardware end-stops and",
"mm offset for Y axis. **Started with this;** ``` //",
"#define X_MAX_POS 200 #define X_MIN_POS 0 #define Y_MAX_POS 190 <<<<",
"Y_MIN_POS 0 #define Z_MAX_POS 200 #define Z_MIN_POS 0 ``` **and",
"My main task is to convert my 3D printer into",
"axis. **Started with this;** ``` // Travel limits after homing",
"my setup;** * Prusa i3 (with mainboard Mks Gen v1.2)",
"* Repetier as slicer * Marlin source code My main",
"* Marlin source code My main task is to convert",
"Z_MAX_POS 200 #define Z_MIN_POS 0 ``` **and this;** ``` //",
"the cartesian print volume. #define MANUAL_X_HOME_POS 0 #define MANUAL_Y_HOME_POS 10",
"the homing switches #define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below",
"related values are mentioned but no joy there as well.",
"the standard 20x20 cm bed. The other X and Z",
"// If defined, MANUAL_*_HOME_POS below will be used //Manual homing",
"-10) #define MANUAL_Z_HOME_POS 0 ``` I have also played with",
"**Before the question, here is my setup;** * Prusa i3"
] |
[
"Plus is with it's 'one use' modelling bases. Is there",
"I have tried ethanol and acetone, but not had any",
"It's criminal how wasteful the Stratsys uPrint SE Plus is",
"a reliable way to re purpose them? I have tried",
"purpose them? I have tried ethanol and acetone, but not",
"way to re purpose them? I have tried ethanol and",
"wasteful the Stratsys uPrint SE Plus is with it's 'one",
"how wasteful the Stratsys uPrint SE Plus is with it's",
"them? I have tried ethanol and acetone, but not had",
"have tried ethanol and acetone, but not had any luck.",
"criminal how wasteful the Stratsys uPrint SE Plus is with",
"Is there a reliable way to re purpose them? I",
"Stratsys uPrint SE Plus is with it's 'one use' modelling",
"there a reliable way to re purpose them? I have",
"the Stratsys uPrint SE Plus is with it's 'one use'",
"with it's 'one use' modelling bases. Is there a reliable",
"to re purpose them? I have tried ethanol and acetone,",
"uPrint SE Plus is with it's 'one use' modelling bases.",
"reliable way to re purpose them? I have tried ethanol",
"modelling bases. Is there a reliable way to re purpose",
"bases. Is there a reliable way to re purpose them?",
"SE Plus is with it's 'one use' modelling bases. Is",
"'one use' modelling bases. Is there a reliable way to",
"use' modelling bases. Is there a reliable way to re",
"is with it's 'one use' modelling bases. Is there a",
"it's 'one use' modelling bases. Is there a reliable way",
"re purpose them? I have tried ethanol and acetone, but"
] |
[
"did not work well in general. Keeping the object fixed",
"easy. As background should I use a checkerboard or something",
"should I use a checkerboard or something else not repetitive?",
"moving camera. Still, treating the resulting mesh was difficult and",
"slow!) with maximum details and resolution. [](https://i.stack.imgur.com/gKzja.jpg)",
"I use a checkerboard or something else not repetitive? I",
"with fixed object and moving camera. Still, treating the resulting",
"here](https://i.stack.imgur.com/ziQp5.jpg)](https://i.stack.imgur.com/ziQp5.jpg) **Update** I dotted the insole with white paint (the",
"of the photos will be lower, while rotating 5-10 degrees",
"could I improve the scanning? I attach a photo of",
"my insoles. I tried to scan it with 123D catch",
"every time is extremely easy. As background should I use",
"object (I have a rotating stand) or should I move",
"insole is black. How could I improve the scanning? I",
"of the insole by about 10 degrees, they will be",
"object. I did the processing locally (it's slow!) with maximum",
"also did a test with fixed camera and rotating object.",
"will be horizontal. Would it improve the accuracy? Edit: the",
"is perfectly new, newer worn before. [](https://i.stack.imgur.com/ziQp5.jpg)",
"that the insole has basically three different \"levels\", joined smoothly",
"not repetitive? I noticed that the insole has basically three",
"mesh to remove useless parts of the model. I haven't",
"(I have a rotating stand) or should I move the",
"and it allows the editing of the mesh to remove",
"the accuracy could be improved. Autodesk Remake 2017 worked VERY",
"\"planes\" are sloped the same way, so that if I",
"the editing of the mesh to remove useless parts of",
"with fixed camera and rotating object. Photoscan did not work",
"insole has basically three different \"levels\", joined smoothly with each",
"tripod, laying on a flat white cardboard support. 55 photos",
"you can see in the attached screenshot, and it allows",
"These \"planes\" are sloped the same way, so that if",
"is difficult because the insole is black. How could I",
"recommended to keep the camera still and rotate the object",
"in the second case, the accuracy of the photos will",
"sloped the same way, so that if I change the",
"How could I improve the scanning? I attach a photo",
"elevations (side, medium, high). I also did a test with",
"mesh was difficult and the accuracy could be improved. Autodesk",
"be lower, while rotating 5-10 degrees the stand every time",
"to obtain a 3D model of my insoles. I tried",
"results, but poor. 123D Catch did a much better job!",
"rotating 5-10 degrees the stand every time is extremely easy.",
"Would it improve the accuracy? Edit: the insole is perfectly",
"because the insole is black. How could I improve the",
"white spots on the surface, but will it be enough?",
"in top of a tripod, laying on a flat white",
"5-10 degrees the stand every time is extremely easy. As",
"a checkerboard or something else not repetitive? I noticed that",
"repetitive? I noticed that the insole has basically three different",
"with 123D catch but finding reference points is difficult because",
"I did the processing locally (it's slow!) with maximum details",
"of the model. I haven't tried yet to process the",
"tried yet to process the photos with the camera fixed",
"better job! again with fixed object and moving camera. Still,",
"shape. I thought about placing a grid of white spots",
"the camera? in the second case, the accuracy of the",
"school) and I took a series of photos with the",
"the photos will be lower, while rotating 5-10 degrees the",
"surface, but will it be enough? Also, is it recommended",
"the accuracy? Edit: the insole is perfectly new, newer worn",
"the insole to show its not easy shape. I thought",
"I dotted the insole with white paint (the white eraser",
"I also did a test with fixed camera and rotating",
"perfectly new, newer worn before. [](https://i.stack.imgur.com/ziQp5.jpg) **Update**",
"so that if I change the pitch of the insole",
"laying on a flat white cardboard support. 55 photos in",
"the object fixed produces the best results, but poor. 123D",
"10 degrees, they will be horizontal. Would it improve the",
"the insole has basically three different \"levels\", joined smoothly with",
"and the accuracy could be improved. Autodesk Remake 2017 worked",
"I tried to scan it with 123D catch but finding",
"fixed and the rotating object. I did the processing locally",
"to remove useless parts of the model. I haven't tried",
"different \"levels\", joined smoothly with each other. These \"planes\" are",
"total at 3 different elevations (side, medium, high). I also",
"I thought about placing a grid of white spots on",
"horizontal. Would it improve the accuracy? Edit: the insole is",
"with the camera fixed and the rotating object. I did",
"of photos with the insole in top of a tripod,",
"useless parts of the model. I haven't tried yet to",
"description here](https://i.stack.imgur.com/ziQp5.jpg)](https://i.stack.imgur.com/ziQp5.jpg) **Update** I dotted the insole with white paint",
"second case, the accuracy of the photos will be lower,",
"noticed that the insole has basically three different \"levels\", joined",
"it allows the editing of the mesh to remove useless",
"a tripod, laying on a flat white cardboard support. 55",
"enough? Also, is it recommended to keep the camera still",
"accuracy could be improved. Autodesk Remake 2017 worked VERY well,",
"with each other. These \"planes\" are sloped the same way,",
"office and school) and I took a series of photos",
"the pitch of the insole by about 10 degrees, they",
"not easy shape. I thought about placing a grid of",
"accuracy? Edit: the insole is perfectly new, newer worn before.",
"worked VERY well, as you can see in the attached",
"black. How could I improve the scanning? I attach a",
"spots on the surface, but will it be enough? Also,",
"has basically three different \"levels\", joined smoothly with each other.",
"I improve the scanning? I attach a photo of the",
"time is extremely easy. As background should I use a",
"in total at 3 different elevations (side, medium, high). I",
"can see in the attached screenshot, and it allows the",
"work well in general. Keeping the object fixed produces the",
"or something else not repetitive? I noticed that the insole",
"editing of the mesh to remove useless parts of the",
"extremely easy. As background should I use a checkerboard or",
"dotted the insole with white paint (the white eraser paint",
"the processing locally (it's slow!) with maximum details and resolution.",
"a photo of the insole to show its not easy",
"series of photos with the insole in top of a",
"other. These \"planes\" are sloped the same way, so that",
"different elevations (side, medium, high). I also did a test",
"move the camera? in the second case, the accuracy of",
"paint (the white eraser paint used in office and school)",
"by about 10 degrees, they will be horizontal. Would it",
"yet to process the photos with the camera fixed and",
"placing a grid of white spots on the surface, but",
"attached screenshot, and it allows the editing of the mesh",
"allows the editing of the mesh to remove useless parts",
"photos will be lower, while rotating 5-10 degrees the stand",
"photos with the insole in top of a tripod, laying",
"on the surface, but will it be enough? Also, is",
"high). I also did a test with fixed camera and",
"much better job! again with fixed object and moving camera.",
"processing locally (it's slow!) with maximum details and resolution. [](https://i.stack.imgur.com/ziQp5.jpg) **Update** I dotted the insole",
"the same way, so that if I change the pitch",
"the second case, the accuracy of the photos will be",
"while rotating 5-10 degrees the stand every time is extremely",
"a much better job! again with fixed object and moving",
"that if I change the pitch of the insole by",
"in office and school) and I took a series of",
"new, newer worn before. [](https://i.stack.imgur.com/ziQp5.jpg) **Update** I",
"and rotate the object (I have a rotating stand) or",
"would like to obtain a 3D model of my insoles.",
"worn before. [](https://i.stack.imgur.com/ziQp5.jpg) **Update** I dotted the",
"Still, treating the resulting mesh was difficult and the accuracy",
"well in general. Keeping the object fixed produces the best",
"the best results, but poor. 123D Catch did a much",
"Edit: the insole is perfectly new, newer worn before. [](https://i.stack.imgur.com/ziQp5.jpg) **Update** I dotted the insole with",
"easy shape. I thought about placing a grid of white",
"to show its not easy shape. I thought about placing",
"but poor. 123D Catch did a much better job! again",
"image description here](https://i.stack.imgur.com/ziQp5.jpg)](https://i.stack.imgur.com/ziQp5.jpg) **Update** I dotted the insole with white",
"stand every time is extremely easy. As background should I",
"process the photos with the camera fixed and the rotating",
"used in office and school) and I took a series",
"if I change the pitch of the insole by about",
"photos with the camera fixed and the rotating object. I",
"to keep the camera still and rotate the object (I",
"I change the pitch of the insole by about 10",
"is extremely easy. As background should I use a checkerboard",
"medium, high). I also did a test with fixed camera",
"insole with white paint (the white eraser paint used in",
"about 10 degrees, they will be horizontal. Would it improve",
"(side, medium, high). I also did a test with fixed",
"catch but finding reference points is difficult because the insole",
"rotating object. I did the processing locally (it's slow!) with",
"cardboard support. 55 photos in total at 3 different elevations",
"the insole is black. How could I improve the scanning?",
"or should I move the camera? in the second case,",
"will be lower, while rotating 5-10 degrees the stand every",
"model of my insoles. I tried to scan it with",
"well, as you can see in the attached screenshot, and",
"at 3 different elevations (side, medium, high). I also did",
"scanning? I attach a photo of the insole to show",
"should I move the camera? in the second case, the",
"and I took a series of photos with the insole",
"not work well in general. Keeping the object fixed produces",
"stand) or should I move the camera? in the second",
"rotating object. Photoscan did not work well in general. Keeping",
"about placing a grid of white spots on the surface,",
"it with 123D catch but finding reference points is difficult",
"could be improved. Autodesk Remake 2017 worked VERY well, as",
"scan it with 123D catch but finding reference points is",
"the surface, but will it be enough? Also, is it",
"rotate the object (I have a rotating stand) or should",
"best results, but poor. 123D Catch did a much better",
"use a checkerboard or something else not repetitive? I noticed",
"the attached screenshot, and it allows the editing of the",
"something else not repetitive? I noticed that the insole has",
"a rotating stand) or should I move the camera? in",
"are sloped the same way, so that if I change",
"each other. These \"planes\" are sloped the same way, so",
"and rotating object. Photoscan did not work well in general.",
"it be enough? Also, is it recommended to keep the",
"still and rotate the object (I have a rotating stand)",
"Also, is it recommended to keep the camera still and",
"I haven't tried yet to process the photos with the",
"3D model of my insoles. I tried to scan it",
"2017 worked VERY well, as you can see in the",
"the rotating object. I did the processing locally (it's slow!)",
"camera still and rotate the object (I have a rotating",
"improve the scanning? I attach a photo of the insole",
"pitch of the insole by about 10 degrees, they will",
"did a test with fixed camera and rotating object. Photoscan",
"it improve the accuracy? Edit: the insole is perfectly new,",
"of white spots on the surface, but will it be",
"the mesh to remove useless parts of the model. I",
"three different \"levels\", joined smoothly with each other. These \"planes\"",
"attach a photo of the insole to show its not",
"keep the camera still and rotate the object (I have",
"tried to scan it with 123D catch but finding reference",
"job! again with fixed object and moving camera. Still, treating",
"have a rotating stand) or should I move the camera?",
"the camera still and rotate the object (I have a",
"with white paint (the white eraser paint used in office",
"insole to show its not easy shape. I thought about",
"smoothly with each other. These \"planes\" are sloped the same",
"thought about placing a grid of white spots on the",
"poor. 123D Catch did a much better job! again with",
"be enough? Also, is it recommended to keep the camera",
"the insole in top of a tripod, laying on a",
"**Update** I dotted the insole with white paint (the white",
"it recommended to keep the camera still and rotate the",
"points is difficult because the insole is black. How could",
"produces the best results, but poor. 123D Catch did a",
"remove useless parts of the model. I haven't tried yet",
"Remake 2017 worked VERY well, as you can see in",
"screenshot, and it allows the editing of the mesh to",
"insole is perfectly new, newer worn before. [](https://i.stack.imgur.com/ziQp5.jpg) **Update** I dotted",
"rotating stand) or should I move the camera? in the",
"degrees, they will be horizontal. Would it improve the accuracy?",
"took a series of photos with the insole in top",
"but will it be enough? Also, is it recommended to",
"accuracy of the photos will be lower, while rotating 5-10",
"Catch did a much better job! again with fixed object",
"of the insole to show its not easy shape. I",
"white paint (the white eraser paint used in office and",
"123D catch but finding reference points is difficult because the",
"is it recommended to keep the camera still and rotate",
"camera and rotating object. Photoscan did not work well in",
"background should I use a checkerboard or something else not",
"difficult because the insole is black. How could I improve",
"change the pitch of the insole by about 10 degrees,",
"but finding reference points is difficult because the insole is",
"flat white cardboard support. 55 photos in total at 3",
"did a much better job! again with fixed object and",
"the resulting mesh was difficult and the accuracy could be",
"a grid of white spots on the surface, but will",
"As background should I use a checkerboard or something else",
"fixed camera and rotating object. Photoscan did not work well",
"joined smoothly with each other. These \"planes\" are sloped the",
"again with fixed object and moving camera. Still, treating the",
"Photoscan did not work well in general. Keeping the object",
"Autodesk Remake 2017 worked VERY well, as you can see",
"difficult and the accuracy could be improved. Autodesk Remake 2017",
"model. I haven't tried yet to process the photos with",
"to scan it with 123D catch but finding reference points",
"VERY well, as you can see in the attached screenshot,",
"photos in total at 3 different elevations (side, medium, high).",
"the insole by about 10 degrees, they will be horizontal.",
"\"levels\", joined smoothly with each other. These \"planes\" are sloped",
"improve the accuracy? Edit: the insole is perfectly new, newer",
"camera? in the second case, the accuracy of the photos",
"fixed object and moving camera. Still, treating the resulting mesh",
"a 3D model of my insoles. I tried to scan",
"is black. How could I improve the scanning? I attach",
"the accuracy of the photos will be lower, while rotating",
"lower, while rotating 5-10 degrees the stand every time is",
"object and moving camera. Still, treating the resulting mesh was",
"the stand every time is extremely easy. As background should",
"obtain a 3D model of my insoles. I tried to",
"camera fixed and the rotating object. I did the processing",
"123D Catch did a much better job! again with fixed",
"its not easy shape. I thought about placing a grid",
"was difficult and the accuracy could be improved. Autodesk Remake"
] |
[
"I'm told you're supposed to aim for about 1 A.",
"2. I don't know how to keep the voltage going,",
"the VMOT? I'm told you're supposed to aim for about",
"I've been looking into this, but: 1. I'm not certain",
"but: 1. I'm not certain how to configure my multimeter;",
"certain how to configure my multimeter; 2. I don't know",
"my multimeter; 2. I don't know how to keep the",
"to keep the voltage going, and; 3. I don't know",
"not certain how to configure my multimeter; 2. I don't",
"looking into this, but: 1. I'm not certain how to",
"multimeter; 2. I don't know how to keep the voltage",
"to keep the multimeter connected to the VMOT? I'm told",
"going, and; 3. I don't know how to keep the",
"keep the multimeter connected to the VMOT? I'm told you're",
"the voltage going, and; 3. I don't know how to",
"to configure my multimeter; 2. I don't know how to",
"configure my multimeter; 2. I don't know how to keep",
"3. I don't know how to keep the multimeter connected",
"this, but: 1. I'm not certain how to configure my",
"to the VMOT? I'm told you're supposed to aim for",
"VMOT? I'm told you're supposed to aim for about 1",
"keep the voltage going, and; 3. I don't know how",
"been looking into this, but: 1. I'm not certain how",
"I'm not certain how to configure my multimeter; 2. I",
"how to keep the voltage going, and; 3. I don't",
"I don't know how to keep the multimeter connected to",
"don't know how to keep the voltage going, and; 3.",
"1. I'm not certain how to configure my multimeter; 2.",
"voltage going, and; 3. I don't know how to keep",
"how to configure my multimeter; 2. I don't know how",
"the multimeter connected to the VMOT? I'm told you're supposed",
"connected to the VMOT? I'm told you're supposed to aim",
"how to keep the multimeter connected to the VMOT? I'm",
"into this, but: 1. I'm not certain how to configure",
"don't know how to keep the multimeter connected to the",
"know how to keep the multimeter connected to the VMOT?",
"multimeter connected to the VMOT? I'm told you're supposed to",
"and; 3. I don't know how to keep the multimeter",
"know how to keep the voltage going, and; 3. I",
"I don't know how to keep the voltage going, and;"
] |
[
"with no infill to save material. However, there are some",
"on the build plate and b. even if it did",
"internal space shell is holding the \"detached\" surfaces. What I",
"needed or that will generate infill but only between the",
"so I prefer something I can do in Cura -",
"and so they are printed earlier with nothing to connect",
"currently designing a very large and complicated model, because it's",
"where there are indentations in the top shell. The bottom",
"it wouldn't fit on the build plate and b. even",
"want to print it with no infill to save material.",
"However, there are some points in the model where there",
"this can't be done in Cura I'll accept answers that",
"would just move the problem from one part of the",
"model is not an option because a. it wouldn't fit",
"I want is a mostly automatic process that will generate",
"the model is not an option because a. it wouldn't",
"some points in the model where there are indentations in",
"surfaces. What I want is a mostly automatic process that",
"hollow I want to print it with no infill to",
"to connect to. For example, in the image below from",
"infill but only between the floating surface and the nearest",
"and b. even if it did it has a lot",
"move the problem from one part of the model to",
"doing is designing internal spaces inside the model where the",
"layer view you can see two round surfaces just hanging",
"in the top shell. The bottom of those indentations are",
"orientations so it would just move the problem from one",
"or that will generate infill but only between the floating",
"just move the problem from one part of the model",
"designing and Cura for slicing so I prefer something I",
"the problem from one part of the model to another.",
"see two round surfaces just hanging in mid air [](https://i.stack.imgur.com/d4Rrm.png) Obviously this can't be",
"use SketchUp for designing and Cura for slicing so I",
"SketchUp for designing and Cura for slicing so I prefer",
"round surfaces just hanging in mid air [](https://i.stack.imgur.com/d4Rrm.png) Obviously this can't be printed. What",
"earlier with nothing to connect to. For example, in the",
"are indentations in the top shell. The bottom of those",
"part of the model to another. I usually use SketchUp",
"can see two round surfaces just hanging in mid air",
"they are printed earlier with nothing to connect to. For",
"I want to print it with no infill to save",
"suspect this can't be done in Cura I'll accept answers",
"strongly suspect this can't be done in Cura I'll accept",
"there are some points in the model where there are",
"I prefer something I can do in Cura - but",
"the build plate and b. even if it did it",
"dictionary definition of indentation) and so they are printed earlier",
"surfaces just hanging in mid air [](https://i.stack.imgur.com/d4Rrm.png)",
"print it with no infill to save material. However, there",
"another. I usually use SketchUp for designing and Cura for",
"inside where needed or that will generate infill but only",
"process that will generate a support structure inside where needed",
"I can do in Cura - but since I strongly",
"model, because it's large and should be strong enough completely",
"but only between the floating surface and the nearest solid",
"I usually use SketchUp for designing and Cura for slicing",
"view you can see two round surfaces just hanging in",
"model where there are indentations in the top shell. The",
"the nearest solid shell below it. Reorienting the model is",
"wouldn't fit on the build plate and b. even if",
"lower then the surrounding shell (pretty mush the dictionary definition",
"but since I strongly suspect this can't be done in",
"option because a. it wouldn't fit on the build plate",
"only between the floating surface and the nearest solid shell",
"below it. Reorienting the model is not an option because",
"for designing and Cura for slicing so I prefer something",
"indentations are lower then the surrounding shell (pretty mush the",
"in the model where there are indentations in the top",
"mid air](https://i.stack.imgur.com/d4Rrm.png)](https://i.stack.imgur.com/d4Rrm.png) Obviously this can't be printed. What I'm currently",
"enough completely hollow I want to print it with no",
"top shell. The bottom of those indentations are lower then",
"shell (pretty mush the dictionary definition of indentation) and so",
"mush the dictionary definition of indentation) and so they are",
"nothing to connect to. For example, in the image below",
"spaces inside the model where the internal space shell is",
"if it did it has a lot of internal parts",
"it would just move the problem from one part of",
"it's large and should be strong enough completely hollow I",
"The bottom of those indentations are lower then the surrounding",
"b. even if it did it has a lot of",
"no infill to save material. However, there are some points",
"is designing internal spaces inside the model where the internal",
"parts with different orientations so it would just move the",
"printed. What I'm currently doing is designing internal spaces inside",
"model to another. I usually use SketchUp for designing and",
"material. However, there are some points in the model where",
"- but since I strongly suspect this can't be done",
"since I strongly suspect this can't be done in Cura",
"a lot of internal parts with different orientations so it",
"should be strong enough completely hollow I want to print",
"and the nearest solid shell below it. Reorienting the model",
"internal parts with different orientations so it would just move",
"large and should be strong enough completely hollow I want",
"can't be printed. What I'm currently doing is designing internal",
"of internal parts with different orientations so it would just",
"it did it has a lot of internal parts with",
"of those indentations are lower then the surrounding shell (pretty",
"generate infill but only between the floating surface and the",
"because it's large and should be strong enough completely hollow",
"points in the model where there are indentations in the",
"in mid air](https://i.stack.imgur.com/d4Rrm.png)](https://i.stack.imgur.com/d4Rrm.png) Obviously this can't be printed. What I'm",
"What I want is a mostly automatic process that will",
"definition of indentation) and so they are printed earlier with",
"strong enough completely hollow I want to print it with",
"the model where the internal space shell is holding the",
"in the image below from Cura's layer view you can",
"automatic process that will generate a support structure inside where",
"that will generate infill but only between the floating surface",
"build plate and b. even if it did it has",
"you can see two round surfaces just hanging in mid",
"there are indentations in the top shell. The bottom of",
"where the internal space shell is holding the \"detached\" surfaces.",
"in Cura - but since I strongly suspect this can't",
"want is a mostly automatic process that will generate a",
"it has a lot of internal parts with different orientations",
"an option because a. it wouldn't fit on the build",
"will generate a support structure inside where needed or that",
"to save material. However, there are some points in the",
"indentation) and so they are printed earlier with nothing to",
"Cura's layer view you can see two round surfaces just",
"I'm currently doing is designing internal spaces inside the model",
"model where the internal space shell is holding the \"detached\"",
"so it would just move the problem from one part",
"nearest solid shell below it. Reorienting the model is not",
"air [](https://i.stack.imgur.com/d4Rrm.png) Obviously this can't be printed.",
"inside the model where the internal space shell is holding",
"the internal space shell is holding the \"detached\" surfaces. What",
"not an option because a. it wouldn't fit on the",
"will generate infill but only between the floating surface and",
"example, in the image below from Cura's layer view you",
"currently doing is designing internal spaces inside the model where",
"are some points in the model where there are indentations",
"solid shell below it. Reorienting the model is not an",
"be printed. What I'm currently doing is designing internal spaces",
"a support structure inside where needed or that will generate",
"For example, in the image below from Cura's layer view",
"different orientations so it would just move the problem from",
"two round surfaces just hanging in mid air [](https://i.stack.imgur.com/d4Rrm.png) Obviously",
"the floating surface and the nearest solid shell below it.",
"surrounding shell (pretty mush the dictionary definition of indentation) and",
"I strongly suspect this can't be done in Cura I'll",
"(pretty mush the dictionary definition of indentation) and so they",
"from Cura's layer view you can see two round surfaces",
"the image below from Cura's layer view you can see",
"are printed earlier with nothing to connect to. For example,",
"in mid air [](https://i.stack.imgur.com/d4Rrm.png) Obviously this can't",
"image below from Cura's layer view you can see two",
"printed earlier with nothing to connect to. For example, in",
"structure inside where needed or that will generate infill but",
"Reorienting the model is not an option because a. it",
"do in Cura - but since I strongly suspect this",
"be done in Cura I'll accept answers that work with",
"did it has a lot of internal parts with different",
"support structure inside where needed or that will generate infill",
"where needed or that will generate infill but only between",
"the model where there are indentations in the top shell.",
"shell is holding the \"detached\" surfaces. What I want is",
"save material. However, there are some points in the model",
"done in Cura I'll accept answers that work with other",
"a very large and complicated model, because it's large and",
"a. it wouldn't fit on the build plate and b.",
"air](https://i.stack.imgur.com/d4Rrm.png)](https://i.stack.imgur.com/d4Rrm.png) Obviously this can't be printed. What I'm currently doing",
"in Cura I'll accept answers that work with other tools",
"this can't be printed. What I'm currently doing is designing",
"of the model to another. I usually use SketchUp for",
"prefer something I can do in Cura - but since",
"mostly automatic process that will generate a support structure inside",
"be strong enough completely hollow I want to print it",
"What I'm currently doing is designing internal spaces inside the",
"is holding the \"detached\" surfaces. What I want is a",
"very large and complicated model, because it's large and should",
"shell. The bottom of those indentations are lower then the",
"to. For example, in the image below from Cura's layer",
"the \"detached\" surfaces. What I want is a mostly automatic",
"I'm currently designing a very large and complicated model, because",
"the model to another. I usually use SketchUp for designing",
"plate and b. even if it did it has a",
"Obviously this can't be printed. What I'm currently doing is",
"between the floating surface and the nearest solid shell below",
"then the surrounding shell (pretty mush the dictionary definition of",
"with different orientations so it would just move the problem",
"are lower then the surrounding shell (pretty mush the dictionary",
"and complicated model, because it's large and should be strong",
"the top shell. The bottom of those indentations are lower",
"it. Reorienting the model is not an option because a.",
"and should be strong enough completely hollow I want to",
"generate a support structure inside where needed or that will",
"is a mostly automatic process that will generate a support",
"problem from one part of the model to another. I",
"designing a very large and complicated model, because it's large",
"one part of the model to another. I usually use",
"of indentation) and so they are printed earlier with nothing",
"hanging in mid air [](https://i.stack.imgur.com/d4Rrm.png) Obviously this",
"those indentations are lower then the surrounding shell (pretty mush",
"the surrounding shell (pretty mush the dictionary definition of indentation)",
"\"detached\" surfaces. What I want is a mostly automatic process",
"Cura for slicing so I prefer something I can do",
"for slicing so I prefer something I can do in"
] |
[
"design of the fanducts, which might be a whole book",
"might be a whole book on its own. I would",
"of print cooling for a given PLA filament, - that",
"cooling for a given PLA filament, - that is fan",
"filament, - that is fan speeds and setup in a",
"be a whole book on its own. I would like",
"which might be a whole book on its own. I",
"is fan speeds and setup in a slicer of your",
"for a given PLA filament, - that is fan speeds",
"about the design of the fanducts, which might be a",
"that is fan speeds and setup in a slicer of",
"of your choice (to learn what the different options are).",
"out the best application of print cooling for a given",
"cool the plastic when printing. I am not asking about",
"am not asking about the design of the fanducts, which",
"of the fanducts, which might be a whole book on",
"print cooling for a given PLA filament, - that is",
"the fanducts, which might be a whole book on its",
"to find out the best application of print cooling for",
"the plastic when printing. I am not asking about the",
"- that is fan speeds and setup in a slicer",
"print fans that cool the plastic when printing. I am",
"application of print cooling for a given PLA filament, -",
"moment, I am thinking about print fans that cool the",
"in a slicer of your choice (to learn what the",
"about print fans that cool the plastic when printing. I",
"fans that cool the plastic when printing. I am not",
"I am not asking about the design of the fanducts,",
"and setup in a slicer of your choice (to learn",
"to know how to find out the best application of",
"fanducts, which might be a whole book on its own.",
"setup in a slicer of your choice (to learn what",
"not asking about the design of the fanducts, which might",
"the moment, I am thinking about print fans that cool",
"a whole book on its own. I would like to",
"its own. I would like to know how to find",
"At the moment, I am thinking about print fans that",
"I am thinking about print fans that cool the plastic",
"how to find out the best application of print cooling",
"best application of print cooling for a given PLA filament,",
"would like to know how to find out the best",
"am thinking about print fans that cool the plastic when",
"the best application of print cooling for a given PLA",
"when printing. I am not asking about the design of",
"that cool the plastic when printing. I am not asking",
"know how to find out the best application of print",
"fan speeds and setup in a slicer of your choice",
"asking about the design of the fanducts, which might be",
"thinking about print fans that cool the plastic when printing.",
"own. I would like to know how to find out",
"printing. I am not asking about the design of the",
"a slicer of your choice (to learn what the different",
"I would like to know how to find out the",
"a given PLA filament, - that is fan speeds and",
"given PLA filament, - that is fan speeds and setup",
"find out the best application of print cooling for a",
"like to know how to find out the best application",
"PLA filament, - that is fan speeds and setup in",
"plastic when printing. I am not asking about the design",
"book on its own. I would like to know how",
"speeds and setup in a slicer of your choice (to",
"whole book on its own. I would like to know",
"on its own. I would like to know how to",
"slicer of your choice (to learn what the different options",
"the design of the fanducts, which might be a whole"
] |
[
"using a BAUDrate of 115200 since I cannot make a",
"to my printer with the advised 250000 rate. Are there",
"since I cannot make a connection to my printer with",
"250000 rate. Are there any downsides or limits I reach",
"Are there any downsides or limits I reach earlier given",
"115200 since I cannot make a connection to my printer",
"with the advised 250000 rate. Are there any downsides or",
"a BAUDrate of 115200 since I cannot make a connection",
"cannot make a connection to my printer with the advised",
"advised 250000 rate. Are there any downsides or limits I",
"the advised 250000 rate. Are there any downsides or limits",
"of 115200 since I cannot make a connection to my",
"printer with the advised 250000 rate. Are there any downsides",
"any downsides or limits I reach earlier given by the",
"downsides or limits I reach earlier given by the lower",
"make a connection to my printer with the advised 250000",
"am using a BAUDrate of 115200 since I cannot make",
"my printer with the advised 250000 rate. Are there any",
"rate. Are there any downsides or limits I reach earlier",
"there any downsides or limits I reach earlier given by",
"connection to my printer with the advised 250000 rate. Are",
"I am using a BAUDrate of 115200 since I cannot",
"BAUDrate of 115200 since I cannot make a connection to",
"or limits I reach earlier given by the lower BAUDrate?",
"a connection to my printer with the advised 250000 rate.",
"I cannot make a connection to my printer with the"
] |
[
"Could you help me determine the cause? The following pictures",
"details: (*All settings which are not shown are Makerware default",
"tried is messed up. The material used is **PLA**. Could",
"Desktop 3D Printer QIDI TECH I*. They recommend using the",
"printed sample** [](https://i.stack.imgur.com/zmWnrm.jpg) [3](https://i.stack.imgur.com/viQoPm.png) **The Settings** [](https://i.stack.imgur.com/viQoPm.png) [](https://i.stack.imgur.com/l3b7om.png)",
"is **PLA**. Could you help me determine the cause? The",
"which are not shown are Makerware default settings*) [1](https://i.stack.imgur.com/Abvj2m.png) **The",
"QIDI TECH I*. They recommend using the MakerBot software with",
"printing from an STL file on the *QIDI TECHNOLOGY 3DP-QDA16-01",
"default settings*) [1](https://i.stack.imgur.com/Abvj2m.png) **The 3D model** [](https://i.stack.imgur.com/Abvj2m.png) [2](https://i.stack.imgur.com/zmWnrm.jpg)",
"The 3D print that I tried is messed up. The",
"[](https://i.stack.imgur.com/Abvj2m.png) [2](https://i.stack.imgur.com/zmWnrm.jpg) **The printed sample** [](https://i.stack.imgur.com/zmWnrm.jpg)",
"**PLA**. Could you help me determine the cause? The following",
"give more details: (*All settings which are not shown are",
"from an STL file on the *QIDI TECHNOLOGY 3DP-QDA16-01 Dual",
"tried printing from an STL file on the *QIDI TECHNOLOGY",
"the MakerBot software with the *Replicator(Dual)* profile. The 3D print",
"on the *QIDI TECHNOLOGY 3DP-QDA16-01 Dual Extruder Desktop 3D Printer",
"are Makerware default settings*) [1](https://i.stack.imgur.com/Abvj2m.png) **The 3D model** [](https://i.stack.imgur.com/zmWnrm.jpg) [3](https://i.stack.imgur.com/viQoPm.png) **The Settings** [](https://i.stack.imgur.com/viQoPm.png)",
"Dual Extruder Desktop 3D Printer QIDI TECH I*. They recommend",
"with the *Replicator(Dual)* profile. The 3D print that I tried",
"software with the *Replicator(Dual)* profile. The 3D print that I",
"Makerware default settings*) [1](https://i.stack.imgur.com/Abvj2m.png) **The 3D model** [](https://i.stack.imgur.com/Abvj2m.png)",
"pictures give more details: (*All settings which are not shown",
"help me determine the cause? The following pictures give more",
"following pictures give more details: (*All settings which are not",
"up. The material used is **PLA**. Could you help me",
"me determine the cause? The following pictures give more details:",
"STL file on the *QIDI TECHNOLOGY 3DP-QDA16-01 Dual Extruder Desktop",
"shown are Makerware default settings*) [1](https://i.stack.imgur.com/Abvj2m.png) **The 3D model** [",
"is messed up. The material used is **PLA**. Could you",
"profile. The 3D print that I tried is messed up.",
"They recommend using the MakerBot software with the *Replicator(Dual)* profile.",
"file on the *QIDI TECHNOLOGY 3DP-QDA16-01 Dual Extruder Desktop 3D",
"I*. They recommend using the MakerBot software with the *Replicator(Dual)*",
"The material used is **PLA**. Could you help me determine",
"model** [](https://i.stack.imgur.com/Abvj2m.png) [2](https://i.stack.imgur.com/zmWnrm.jpg) **The printed sample** [ **The printed sample** [](https://i.stack.imgur.com/zmWnrm.jpg) [3](https://i.stack.imgur.com/viQoPm.png) **The Settings**",
"TECH I*. They recommend using the MakerBot software with the",
"settings*) [1](https://i.stack.imgur.com/Abvj2m.png) **The 3D model** [](https://i.stack.imgur.com/Abvj2m.png) [2](https://i.stack.imgur.com/zmWnrm.jpg) **The",
"material used is **PLA**. Could you help me determine the",
"the *QIDI TECHNOLOGY 3DP-QDA16-01 Dual Extruder Desktop 3D Printer QIDI",
"that I tried is messed up. The material used is",
"*Replicator(Dual)* profile. The 3D print that I tried is messed",
"3D Model](https://i.stack.imgur.com/Abvj2m.png)](https://i.stack.imgur.com/Abvj2m.png) [2](https://i.stack.imgur.com/zmWnrm.jpg) **The printed sample** [](https://i.stack.imgur.com/zmWnrm.jpg) [3](https://i.stack.imgur.com/viQoPm.png)",
"are not shown are Makerware default settings*) [1](https://i.stack.imgur.com/Abvj2m.png) **The 3D",
"print that I tried is messed up. The material used",
"you help me determine the cause? The following pictures give",
"the *Replicator(Dual)* profile. The 3D print that I tried is",
"an STL file on the *QIDI TECHNOLOGY 3DP-QDA16-01 Dual Extruder",
"Printer QIDI TECH I*. They recommend using the MakerBot software",
"Extruder Desktop 3D Printer QIDI TECH I*. They recommend using",
"the cause? The following pictures give more details: (*All settings",
"recommend using the MakerBot software with the *Replicator(Dual)* profile. The",
"Model](https://i.stack.imgur.com/Abvj2m.png)](https://i.stack.imgur.com/Abvj2m.png) [2](https://i.stack.imgur.com/zmWnrm.jpg) **The printed sample** [](https://i.stack.imgur.com/zmWnrm.jpg) [3](https://i.stack.imgur.com/viQoPm.png) **The",
"**The 3D model** [](https://i.stack.imgur.com/Abvj2m.png) [2](https://i.stack.imgur.com/zmWnrm.jpg) **The printed sample**",
"used is **PLA**. Could you help me determine the cause?",
"The following pictures give more details: (*All settings which are",
"3D model** [](https://i.stack.imgur.com/Abvj2m.png) [2](https://i.stack.imgur.com/zmWnrm.jpg) **The printed sample** [ **The 3D model**",
"using the MakerBot software with the *Replicator(Dual)* profile. The 3D",
"cause? The following pictures give more details: (*All settings which",
"MakerBot software with the *Replicator(Dual)* profile. The 3D print that",
"*QIDI TECHNOLOGY 3DP-QDA16-01 Dual Extruder Desktop 3D Printer QIDI TECH",
"[1](https://i.stack.imgur.com/Abvj2m.png) **The 3D model** [](https://i.stack.imgur.com/Abvj2m.png) [2](https://i.stack.imgur.com/zmWnrm.jpg) **The printed",
"3D print that I tried is messed up. The material",
"TECHNOLOGY 3DP-QDA16-01 Dual Extruder Desktop 3D Printer QIDI TECH I*.",
"I tried is messed up. The material used is **PLA**."
] |
[
"that I can add onto my current motors and that",
"the relative ease of its motion, when the Z-axis motor",
"that could be replicated with a 3D printer) would also",
"fall down. Obviously leaving the motor powered solves this problem,",
"or clutch. Ideally I'm looking for something that I can",
"not ideal. I am looking for some kind of solution",
"I can add onto my current motors and that I",
"powered down the bed has a tendency to slip and",
"solution that passively stops the Z-axis motor from slipping; some",
"stops the Z-axis motor from slipping; some kind of brake",
"can add onto my current motors and that I could",
"solves this problem, but that is not ideal. I am",
"I'm looking for something that I can add onto my",
"motor is powered down the bed has a tendency to",
"(preferably ones that could be replicated with a 3D printer)",
"something that I can add onto my current motors and",
"could be replicated with a 3D printer) would also make",
"motor powered solves this problem, but that is not ideal.",
"looking for some kind of solution that passively stops the",
"weight of my Z-axis and the relative ease of its",
"when the Z-axis motor is powered down the bed has",
"clutch. Ideally I'm looking for something that I can add",
"onto my current motors and that I could print myself.",
"of brake or clutch. Ideally I'm looking for something that",
"that I could print myself. Commercial solutions (preferably ones that",
"relative ease of its motion, when the Z-axis motor is",
"looking for something that I can add onto my current",
"my current motors and that I could print myself. Commercial",
"for some kind of solution that passively stops the Z-axis",
"print myself. Commercial solutions (preferably ones that could be replicated",
"for something that I can add onto my current motors",
"am looking for some kind of solution that passively stops",
"add onto my current motors and that I could print",
"Z-axis motor from slipping; some kind of brake or clutch.",
"and that I could print myself. Commercial solutions (preferably ones",
"solutions (preferably ones that could be replicated with a 3D",
"this problem, but that is not ideal. I am looking",
"ones that could be replicated with a 3D printer) would",
"ideal. I am looking for some kind of solution that",
"my Z-axis and the relative ease of its motion, when",
"current motors and that I could print myself. Commercial solutions",
"motion, when the Z-axis motor is powered down the bed",
"down the bed has a tendency to slip and fall",
"bed has a tendency to slip and fall down. Obviously",
"kind of solution that passively stops the Z-axis motor from",
"ease of its motion, when the Z-axis motor is powered",
"of the weight of my Z-axis and the relative ease",
"could print myself. Commercial solutions (preferably ones that could be",
"the motor powered solves this problem, but that is not",
"to slip and fall down. Obviously leaving the motor powered",
"powered solves this problem, but that is not ideal. I",
"Ideally I'm looking for something that I can add onto",
"replicated with a 3D printer) would also make valid answers.",
"the Z-axis motor is powered down the bed has a",
"has a tendency to slip and fall down. Obviously leaving",
"Obviously leaving the motor powered solves this problem, but that",
"but that is not ideal. I am looking for some",
"and the relative ease of its motion, when the Z-axis",
"passively stops the Z-axis motor from slipping; some kind of",
"slip and fall down. Obviously leaving the motor powered solves",
"down. Obviously leaving the motor powered solves this problem, but",
"I could print myself. Commercial solutions (preferably ones that could",
"Commercial solutions (preferably ones that could be replicated with a",
"some kind of brake or clutch. Ideally I'm looking for",
"is not ideal. I am looking for some kind of",
"is powered down the bed has a tendency to slip",
"of my Z-axis and the relative ease of its motion,",
"Because of the weight of my Z-axis and the relative",
"and fall down. Obviously leaving the motor powered solves this",
"kind of brake or clutch. Ideally I'm looking for something",
"some kind of solution that passively stops the Z-axis motor",
"Z-axis and the relative ease of its motion, when the",
"problem, but that is not ideal. I am looking for",
"of solution that passively stops the Z-axis motor from slipping;",
"that is not ideal. I am looking for some kind",
"its motion, when the Z-axis motor is powered down the",
"the Z-axis motor from slipping; some kind of brake or",
"tendency to slip and fall down. Obviously leaving the motor",
"slipping; some kind of brake or clutch. Ideally I'm looking",
"motors and that I could print myself. Commercial solutions (preferably",
"leaving the motor powered solves this problem, but that is",
"motor from slipping; some kind of brake or clutch. Ideally",
"a tendency to slip and fall down. Obviously leaving the",
"the bed has a tendency to slip and fall down.",
"be replicated with a 3D printer) would also make valid",
"brake or clutch. Ideally I'm looking for something that I",
"myself. Commercial solutions (preferably ones that could be replicated with",
"Z-axis motor is powered down the bed has a tendency",
"from slipping; some kind of brake or clutch. Ideally I'm",
"that passively stops the Z-axis motor from slipping; some kind",
"the weight of my Z-axis and the relative ease of",
"I am looking for some kind of solution that passively",
"of its motion, when the Z-axis motor is powered down"
] |
[
"beginners, I suppose: \"The hotend is that tube that heats",
"which has a hotend that doesn't expose any of its",
"plastic and deposits it on the print bed.\" [](https://i.stack.imgur.com/7y1yy.jpg)",
"simple as it looks, either. What are the parts that",
"Easy for beginners, I suppose: \"The hotend is that tube",
"are the parts that make up a hotend, and what",
"bed.\" [](https://i.stack.imgur.com/7y1yy.jpg) [](https://i.stack.imgur.com/SwwW1.jpg) But",
"hotend](https://i.stack.imgur.com/SwwW1.jpg)](https://i.stack.imgur.com/SwwW1.jpg) But I've been trying to learn more, and many",
"make up a hotend, and what do they do? *(PS:",
"its internal parts. Easy for beginners, I suppose: \"The hotend",
"what do they do? *(PS: This is a general question,",
"up the plastic and deposits it on the print bed.\"",
"and what do they do? *(PS: This is a general",
"Metal hotend](https://i.stack.imgur.com/7y1yy.jpg)](https://i.stack.imgur.com/7y1yy.jpg) [](https://i.stack.imgur.com/SwwW1.jpg) But I've been trying",
"it on the print bed.\" [](https://i.stack.imgur.com/7y1yy.jpg) [](https://i.stack.imgur.com/SwwW1.jpg) But I've been trying to learn",
"Metal, which has a hotend that doesn't expose any of",
"hotend](https://i.stack.imgur.com/7y1yy.jpg)](https://i.stack.imgur.com/7y1yy.jpg) [](https://i.stack.imgur.com/SwwW1.jpg) But I've been trying to",
"do they do? *(PS: This is a general question, not",
"What are the parts that make up a hotend, and",
"been trying to learn more, and many hotends out there",
"is a general question, not specifically about the two example",
"as simple as it looks, either. What are the parts",
"as simple. My Printrbot hotend probably isn't as simple as",
"they do? *(PS: This is a general question, not specifically",
"looking hotend](https://i.stack.imgur.com/SwwW1.jpg)](https://i.stack.imgur.com/SwwW1.jpg) But I've been trying to learn more, and",
"and many hotends out there don't look quite as simple.",
"Simple Metal, which has a hotend that doesn't expose any",
"on the print bed.\" [](https://i.stack.imgur.com/7y1yy.jpg) [](https://i.stack.imgur.com/SwwW1.jpg) But I've been trying to learn more,",
"up a hotend, and what do they do? *(PS: This",
"a Printrbot Simple Metal, which has a hotend that doesn't",
"the parts that make up a hotend, and what do",
"hotend that doesn't expose any of its internal parts. Easy",
"Simple Metal hotend](https://i.stack.imgur.com/7y1yy.jpg)](https://i.stack.imgur.com/7y1yy.jpg) [](https://i.stack.imgur.com/SwwW1.jpg) But I've been",
"Printrbot Simple Metal, which has a hotend that doesn't expose",
"the print bed.\" [](https://i.stack.imgur.com/7y1yy.jpg) [](https://i.stack.imgur.com/7y1yy.jpg) [](https://i.stack.imgur.com/SwwW1.jpg) But I've",
"hotend, and what do they do? *(PS: This is a",
"3D printer is a Printrbot Simple Metal, which has a",
"a hotend that doesn't expose any of its internal parts.",
"print bed.\" [](https://i.stack.imgur.com/7y1yy.jpg) [](https://i.stack.imgur.com/SwwW1.jpg)",
"more, and many hotends out there don't look quite as",
"out there don't look quite as simple. My Printrbot hotend",
"a general question, not specifically about the two example hotends",
"parts. Easy for beginners, I suppose: \"The hotend is that",
"simple. My Printrbot hotend probably isn't as simple as it",
"that doesn't expose any of its internal parts. Easy for",
"heats up the plastic and deposits it on the print",
"hotend probably isn't as simple as it looks, either. What"
] |
[
"means that I can plug it directly into [my power",
"into [my power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) instead of running it though my",
"can plug it directly into [my power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) instead of",
"plug it directly into [my power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) instead of running",
"though my RAMPs 1.4; is that correct? Here is the",
"is that correct? Here is the link to it, [200\\*200mm",
"directly into [my power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) instead of running it though",
"it means that I can plug it directly into [my",
"1.4; is that correct? Here is the link to it,",
"keep thinking it means that I can plug it directly",
"that I can plug it directly into [my power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI)",
"it directly into [my power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) instead of running it",
"instead of running it though my RAMPs 1.4; is that",
"it though my RAMPs 1.4; is that correct? Here is",
"RAMPs 1.4; is that correct? Here is the link to",
"that correct? Here is the link to it, [200\\*200mm Square",
"supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) instead of running it though my RAMPs 1.4; is",
"my RAMPs 1.4; is that correct? Here is the link",
"I keep thinking it means that I can plug it",
"I can plug it directly into [my power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) instead",
"[my power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) instead of running it though my RAMPs",
"of running it though my RAMPs 1.4; is that correct?",
"correct? Here is the link to it, [200\\*200mm Square Silicone",
"power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) instead of running it though my RAMPs 1.4;",
"thinking it means that I can plug it directly into",
"Here is the link to it, [200\\*200mm Square Silicone Heater",
"is the link to it, [200\\*200mm Square Silicone Heater Pad](http://www.robotdigg.com/product/209).",
"running it though my RAMPs 1.4; is that correct? Here"
] |
[
"probably wont work anyways. It keeps curling up by the",
"It keeps curling up by the cog. I have read",
"in other places but I didn't like the answers. Hoping",
"to load TPU without tearing my printer apart to insert",
"SIMPLE/easy way to load TPU without tearing my printer apart",
"way to load TPU without tearing my printer apart to",
"by the cog. I have read a few topics in",
"without tearing my printer apart to insert a hose that",
"have read a few topics in other places but I",
"like the answers. Hoping you all might have a simple",
"didn't like the answers. Hoping you all might have a",
"is... Is there a SIMPLE/easy way to load TPU without",
"read a few topics in other places but I didn't",
"few topics in other places but I didn't like the",
"work anyways. It keeps curling up by the cog. I",
"a SIMPLE/easy way to load TPU without tearing my printer",
"topics in other places but I didn't like the answers.",
"a hose that probably wont work anyways. It keeps curling",
"my printer apart to insert a hose that probably wont",
"wont work anyways. It keeps curling up by the cog.",
"anyways. It keeps curling up by the cog. I have",
"that probably wont work anyways. It keeps curling up by",
"question is... Is there a SIMPLE/easy way to load TPU",
"apart to insert a hose that probably wont work anyways.",
"up by the cog. I have read a few topics",
"other places but I didn't like the answers. Hoping you",
"load TPU without tearing my printer apart to insert a",
"printer apart to insert a hose that probably wont work",
"tearing my printer apart to insert a hose that probably",
"to insert a hose that probably wont work anyways. It",
"Is there a SIMPLE/easy way to load TPU without tearing",
"keeps curling up by the cog. I have read a",
"the cog. I have read a few topics in other",
"I didn't like the answers. Hoping you all might have",
"but I didn't like the answers. Hoping you all might",
"cog. I have read a few topics in other places",
"curling up by the cog. I have read a few",
"My question is... Is there a SIMPLE/easy way to load",
"TPU without tearing my printer apart to insert a hose",
"I have read a few topics in other places but",
"places but I didn't like the answers. Hoping you all",
"the answers. Hoping you all might have a simple fix.",
"a few topics in other places but I didn't like",
"there a SIMPLE/easy way to load TPU without tearing my",
"hose that probably wont work anyways. It keeps curling up",
"insert a hose that probably wont work anyways. It keeps"
] |
[
"however, I want it to print standing up. Is this",
"case, however, I want it to print standing up. Is",
"to 3D print an iPhone case, however, I want it",
"I am trying to 3D print an iPhone case, however,",
"an iPhone case, however, I want it to print standing",
"trying to 3D print an iPhone case, however, I want",
"print standing up. Is this possible to do? I have",
"3D print an iPhone case, however, I want it to",
"print an iPhone case, however, I want it to print",
"a picture of the case in the link below.[](https://i.stack.imgur.com/dUYr0.png)",
"standing up. Is this possible to do? I have a",
"possible to do? I have a picture of the case",
"to print standing up. Is this possible to do? I",
"I want it to print standing up. Is this possible",
"am trying to 3D print an iPhone case, however, I",
"do? I have a picture of the case in the",
"have a picture of the case in the link below.[![iphone",
"this possible to do? I have a picture of the",
"want it to print standing up. Is this possible to",
"Is this possible to do? I have a picture of",
"it to print standing up. Is this possible to do?",
"I have a picture of the case in the link",
"up. Is this possible to do? I have a picture",
"iPhone case, however, I want it to print standing up.",
"to do? I have a picture of the case in"
] |
[
"for something that's slightly more permanent. I was wondering if",
"to find a way of applying graphics to my ABS",
"surfaces I work with would be flat, but there are",
"of detail with true color and legible fine text .",
"slightly curved and it would be totally amazing if I",
"and legible fine text . I also was hoping to",
"types of decal material could be pressed into the face",
"are slightly curved and it would be totally amazing if",
"Most of the surfaces I work with would be flat,",
"I could somehow apply graphics to those areas as well.",
"some parts that are slightly curved and it would be",
"but there are some parts that are slightly curved and",
"of applying graphics to my ABS printed parts. I need",
"the face of a plastic part and then thermally fuse",
"that's slightly more permanent. I was wondering if there are",
"decent amount of detail with true color and legible fine",
"part and then thermally fuse the two layers together using",
"apply graphics to those areas as well. Thanks for any",
"stickers and opt for something that's slightly more permanent. I",
"I also was hoping to avoid the use of stickers",
"into the face of a plastic part and then thermally",
"use of stickers and opt for something that's slightly more",
"plastic part and then thermally fuse the two layers together",
"was hoping to avoid the use of stickers and opt",
"the surfaces I work with would be flat, but there",
"other types of decal material could be pressed into the",
"pressed into the face of a plastic part and then",
"find a way of applying graphics to my ABS printed",
"a vinyl decal or other types of decal material could",
"decal material could be pressed into the face of a",
"there are some parts that are slightly curved and it",
"I was wondering if there are ways in which a",
"ways in which a vinyl decal or other types of",
"method? Most of the surfaces I work with would be",
"which a vinyl decal or other types of decal material",
"would be totally amazing if I could somehow apply graphics",
"detail with true color and legible fine text . I",
"somehow apply graphics to those areas as well. Thanks for",
"way of applying graphics to my ABS printed parts. I",
"robust method which can produce a decent amount of detail",
"the two layers together using heat transfer method? Most of",
"parts. I need a robust method which can produce a",
"something that's slightly more permanent. I was wondering if there",
"color and legible fine text . I also was hoping",
"are ways in which a vinyl decal or other types",
"also was hoping to avoid the use of stickers and",
"amazing if I could somehow apply graphics to those areas",
"of the surfaces I work with would be flat, but",
"transfer method? Most of the surfaces I work with would",
"was wondering if there are ways in which a vinyl",
"I work with would be flat, but there are some",
"true color and legible fine text . I also was",
"and then thermally fuse the two layers together using heat",
"method which can produce a decent amount of detail with",
"graphics to those areas as well. Thanks for any hints",
"decal or other types of decal material could be pressed",
"to my ABS printed parts. I need a robust method",
"fine text . I also was hoping to avoid the",
"using heat transfer method? Most of the surfaces I work",
"it would be totally amazing if I could somehow apply",
"in which a vinyl decal or other types of decal",
"printed parts. I need a robust method which can produce",
"or other types of decal material could be pressed into",
"more permanent. I was wondering if there are ways in",
"would be flat, but there are some parts that are",
"produce a decent amount of detail with true color and",
"to avoid the use of stickers and opt for something",
"slightly more permanent. I was wondering if there are ways",
"ABS printed parts. I need a robust method which can",
"hoping to avoid the use of stickers and opt for",
"thermally fuse the two layers together using heat transfer method?",
"heat transfer method? Most of the surfaces I work with",
"need a robust method which can produce a decent amount",
"a way of applying graphics to my ABS printed parts.",
"applying graphics to my ABS printed parts. I need a",
"layers together using heat transfer method? Most of the surfaces",
"that are slightly curved and it would be totally amazing",
"a decent amount of detail with true color and legible",
"could be pressed into the face of a plastic part",
"trying to find a way of applying graphics to my",
"amount of detail with true color and legible fine text",
"legible fine text . I also was hoping to avoid",
"a robust method which can produce a decent amount of",
"curved and it would be totally amazing if I could",
"I need a robust method which can produce a decent",
"two layers together using heat transfer method? Most of the",
"are some parts that are slightly curved and it would",
"could somehow apply graphics to those areas as well. Thanks",
"can produce a decent amount of detail with true color",
"permanent. I was wondering if there are ways in which",
"text . I also was hoping to avoid the use",
"and opt for something that's slightly more permanent. I was",
"face of a plastic part and then thermally fuse the",
"and it would be totally amazing if I could somehow",
"material could be pressed into the face of a plastic",
"opt for something that's slightly more permanent. I was wondering",
"wondering if there are ways in which a vinyl decal",
"a plastic part and then thermally fuse the two layers",
"my ABS printed parts. I need a robust method which",
"of a plastic part and then thermally fuse the two",
"there are ways in which a vinyl decal or other",
"if there are ways in which a vinyl decal or",
"be totally amazing if I could somehow apply graphics to",
"work with would be flat, but there are some parts",
"avoid the use of stickers and opt for something that's",
"fuse the two layers together using heat transfer method? Most",
". I also was hoping to avoid the use of",
"with would be flat, but there are some parts that",
"together using heat transfer method? Most of the surfaces I",
"of decal material could be pressed into the face of",
"which can produce a decent amount of detail with true",
"be flat, but there are some parts that are slightly",
"parts that are slightly curved and it would be totally",
"then thermally fuse the two layers together using heat transfer",
"vinyl decal or other types of decal material could be",
"be pressed into the face of a plastic part and",
"I'm trying to find a way of applying graphics to",
"totally amazing if I could somehow apply graphics to those",
"graphics to my ABS printed parts. I need a robust",
"of stickers and opt for something that's slightly more permanent.",
"flat, but there are some parts that are slightly curved",
"the use of stickers and opt for something that's slightly",
"with true color and legible fine text . I also",
"if I could somehow apply graphics to those areas as"
] |
[
"one. Anyone know? If found this material on Matweb: [PEI+PC",
"offer 3 materials: ABS, HDPE, and PEI+PC ... I'm not",
"of you decide to upload a project into contest site",
"printable files for the International Space Station's 3D printer. The",
"John Fluke DVOM. If nothing else a free awesome T-shirt.",
"Alloy](http://www.matweb.com/search/DataSheet.aspx?MatGUID=949ca0fa6b1742bea8e8d26ea2fd3d48t) These links are thought to last a very long",
"to develop 3D printable files for the International Space Station's",
"decide to upload a project into contest site and compete",
"printer. The winner got a 3D printer ... runners up",
"They offer 3 materials: ABS, HDPE, and PEI+PC ... I'm",
"very long time. I hope many of you decide to",
"t-shirt. ISS 3D Print Contest They offer 3 materials: ABS,",
"DVOM's and all entrants got a t-shirt. ISS 3D Print",
"compete for the grand prize ... A sweet John Fluke",
"was a contest to develop 3D printable files for the",
"not familiar with the last one. Anyone know? If found",
"contest to develop 3D printable files for the International Space",
"Anyone know? If found this material on Matweb: [PEI+PC Alloy](http://www.matweb.com/search/DataSheet.aspx?MatGUID=949ca0fa6b1742bea8e8d26ea2fd3d48t)",
"3 materials: ABS, HDPE, and PEI+PC ... I'm not familiar",
"to last a very long time. I hope many of",
"got Fluke DVOM's and all entrants got a t-shirt. ISS",
"Station's 3D printer. The winner got a 3D printer ...",
"and PEI+PC ... I'm not familiar with the last one.",
"for the International Space Station's 3D printer. The winner got",
"the grand prize ... A sweet John Fluke DVOM. If",
"a contest to develop 3D printable files for the International",
"Fluke DVOM's and all entrants got a t-shirt. ISS 3D",
"contest site and compete for the grand prize ... A",
"3D printer ... runners up got Fluke DVOM's and all",
"last a very long time. I hope many of you",
"the last one. Anyone know? If found this material on",
"and all entrants got a t-shirt. ISS 3D Print Contest",
"International Space Station's 3D printer. The winner got a 3D",
"PEI+PC ... I'm not familiar with the last one. Anyone",
"know? If found this material on Matweb: [PEI+PC Alloy](http://www.matweb.com/search/DataSheet.aspx?MatGUID=949ca0fa6b1742bea8e8d26ea2fd3d48t) These",
"Print Contest They offer 3 materials: ABS, HDPE, and PEI+PC",
"HDPE, and PEI+PC ... I'm not familiar with the last",
"a project into contest site and compete for the grand",
"hope many of you decide to upload a project into",
"found this material on Matweb: [PEI+PC Alloy](http://www.matweb.com/search/DataSheet.aspx?MatGUID=949ca0fa6b1742bea8e8d26ea2fd3d48t) These links are",
"project into contest site and compete for the grand prize",
"files for the International Space Station's 3D printer. The winner",
"materials: ABS, HDPE, and PEI+PC ... I'm not familiar with",
"A sweet John Fluke DVOM. If nothing else a free",
"material on Matweb: [PEI+PC Alloy](http://www.matweb.com/search/DataSheet.aspx?MatGUID=949ca0fa6b1742bea8e8d26ea2fd3d48t) These links are thought to",
"last one. Anyone know? If found this material on Matweb:",
"site and compete for the grand prize ... A sweet",
"sweet John Fluke DVOM. If nothing else a free awesome",
"this material on Matweb: [PEI+PC Alloy](http://www.matweb.com/search/DataSheet.aspx?MatGUID=949ca0fa6b1742bea8e8d26ea2fd3d48t) These links are thought",
"I'm not familiar with the last one. Anyone know? If",
"and compete for the grand prize ... A sweet John",
"links are thought to last a very long time. I",
"a 3D printer ... runners up got Fluke DVOM's and",
"many of you decide to upload a project into contest",
"3D printer. The winner got a 3D printer ... runners",
"[PEI+PC Alloy](http://www.matweb.com/search/DataSheet.aspx?MatGUID=949ca0fa6b1742bea8e8d26ea2fd3d48t) These links are thought to last a very",
"printer ... runners up got Fluke DVOM's and all entrants",
"winner got a 3D printer ... runners up got Fluke",
"into contest site and compete for the grand prize ...",
"for the grand prize ... A sweet John Fluke DVOM.",
"... runners up got Fluke DVOM's and all entrants got",
"Matweb: [PEI+PC Alloy](http://www.matweb.com/search/DataSheet.aspx?MatGUID=949ca0fa6b1742bea8e8d26ea2fd3d48t) These links are thought to last a",
"... A sweet John Fluke DVOM. If nothing else a",
"Contest They offer 3 materials: ABS, HDPE, and PEI+PC ...",
"time. I hope many of you decide to upload a",
"upload a project into contest site and compete for the",
"runners up got Fluke DVOM's and all entrants got a",
"familiar with the last one. Anyone know? If found this",
"... I'm not familiar with the last one. Anyone know?",
"the International Space Station's 3D printer. The winner got a",
"all entrants got a t-shirt. ISS 3D Print Contest They",
"I hope many of you decide to upload a project",
"a very long time. I hope many of you decide",
"3D Print Contest They offer 3 materials: ABS, HDPE, and",
"to upload a project into contest site and compete for",
"got a 3D printer ... runners up got Fluke DVOM's",
"The winner got a 3D printer ... runners up got",
"you decide to upload a project into contest site and",
"There was a contest to develop 3D printable files for",
"ISS 3D Print Contest They offer 3 materials: ABS, HDPE,",
"a t-shirt. ISS 3D Print Contest They offer 3 materials:",
"These links are thought to last a very long time.",
"with the last one. Anyone know? If found this material",
"entrants got a t-shirt. ISS 3D Print Contest They offer",
"ABS, HDPE, and PEI+PC ... I'm not familiar with the",
"grand prize ... A sweet John Fluke DVOM. If nothing",
"up got Fluke DVOM's and all entrants got a t-shirt.",
"are thought to last a very long time. I hope",
"long time. I hope many of you decide to upload",
"prize ... A sweet John Fluke DVOM. If nothing else",
"develop 3D printable files for the International Space Station's 3D",
"thought to last a very long time. I hope many",
"on Matweb: [PEI+PC Alloy](http://www.matweb.com/search/DataSheet.aspx?MatGUID=949ca0fa6b1742bea8e8d26ea2fd3d48t) These links are thought to last",
"3D printable files for the International Space Station's 3D printer.",
"Space Station's 3D printer. The winner got a 3D printer",
"got a t-shirt. ISS 3D Print Contest They offer 3",
"If found this material on Matweb: [PEI+PC Alloy](http://www.matweb.com/search/DataSheet.aspx?MatGUID=949ca0fa6b1742bea8e8d26ea2fd3d48t) These links"
] |
[
"there something you have to do when uploading a new",
"isn't there something you have to do when uploading a",
"I have a prusa i3 and have been trying to",
"mm and I get to done uploading. However when I",
"type M503 to get the printers settings it still shows",
"shows the steps as 100 for the y axis, it",
"have been trying to calibrate it. I have been trying",
"do when uploading a new sketch like hold the rest",
"get the printers settings it still shows the steps as",
"with Adrunio mega 2560. If I am remembering this correctly",
"been trying to calibrate it. I have been trying to",
"trying to upload the new steps per mm and I",
"However when I go into Repetier host and type M503",
"for the y axis, it needs to be 96.1810. I",
"needs to be 96.1810. I am using ramps 1.4 I",
"I go into Repetier host and type M503 to get",
"into Repetier host and type M503 to get the printers",
"steps as 100 for the y axis, it needs to",
"correctly isn't there something you have to do when uploading",
"Adrunio mega 2560. If I am remembering this correctly isn't",
"to upload the new steps per mm and I get",
"to calibrate it. I have been trying to upload the",
"and I get to done uploading. However when I go",
"uploading. However when I go into Repetier host and type",
"when I go into Repetier host and type M503 to",
"be 96.1810. I am using ramps 1.4 I think, with",
"I am using ramps 1.4 I think, with Adrunio mega",
"to be 96.1810. I am using ramps 1.4 I think,",
"host and type M503 to get the printers settings it",
"to get the printers settings it still shows the steps",
"this correctly isn't there something you have to do when",
"something you have to do when uploading a new sketch",
"1.4 I think, with Adrunio mega 2560. If I am",
"the steps as 100 for the y axis, it needs",
"have been trying to upload the new steps per mm",
"trying to calibrate it. I have been trying to upload",
"I think, with Adrunio mega 2560. If I am remembering",
"the y axis, it needs to be 96.1810. I am",
"I get to done uploading. However when I go into",
"steps per mm and I get to done uploading. However",
"go into Repetier host and type M503 to get the",
"100 for the y axis, it needs to be 96.1810.",
"a prusa i3 and have been trying to calibrate it.",
"still shows the steps as 100 for the y axis,",
"when uploading a new sketch like hold the rest button",
"the printers settings it still shows the steps as 100",
"ramps 1.4 I think, with Adrunio mega 2560. If I",
"to done uploading. However when I go into Repetier host",
"printers settings it still shows the steps as 100 for",
"settings it still shows the steps as 100 for the",
"If I am remembering this correctly isn't there something you",
"axis, it needs to be 96.1810. I am using ramps",
"to do when uploading a new sketch like hold the",
"I have been trying to upload the new steps per",
"I am remembering this correctly isn't there something you have",
"have to do when uploading a new sketch like hold",
"uploading a new sketch like hold the rest button or",
"y axis, it needs to be 96.1810. I am using",
"2560. If I am remembering this correctly isn't there something",
"i3 and have been trying to calibrate it. I have",
"it still shows the steps as 100 for the y",
"the new steps per mm and I get to done",
"a new sketch like hold the rest button or something?",
"remembering this correctly isn't there something you have to do",
"it needs to be 96.1810. I am using ramps 1.4",
"calibrate it. I have been trying to upload the new",
"96.1810. I am using ramps 1.4 I think, with Adrunio",
"and have been trying to calibrate it. I have been",
"using ramps 1.4 I think, with Adrunio mega 2560. If",
"mega 2560. If I am remembering this correctly isn't there",
"am using ramps 1.4 I think, with Adrunio mega 2560.",
"and type M503 to get the printers settings it still",
"M503 to get the printers settings it still shows the",
"new steps per mm and I get to done uploading.",
"you have to do when uploading a new sketch like",
"get to done uploading. However when I go into Repetier",
"per mm and I get to done uploading. However when",
"have a prusa i3 and have been trying to calibrate",
"as 100 for the y axis, it needs to be",
"am remembering this correctly isn't there something you have to",
"upload the new steps per mm and I get to",
"been trying to upload the new steps per mm and",
"think, with Adrunio mega 2560. If I am remembering this",
"done uploading. However when I go into Repetier host and",
"Repetier host and type M503 to get the printers settings",
"prusa i3 and have been trying to calibrate it. I",
"it. I have been trying to upload the new steps"
] |
[
"using a hair dryer on the underside of the plate.",
"My wife suggested using a hair dryer on the underside",
"idea, but now I think she may be on to",
"plate on my Micro3D printer. My wife suggested using a",
"my Micro3D printer. My wife suggested using a hair dryer",
"to remove from the build plate on my Micro3D printer.",
"wife suggested using a hair dryer on the underside of",
"dryer on the underside of the plate. I was initially",
"think she may be on to something. Is this safe?",
"build plate on my Micro3D printer. My wife suggested using",
"being especially difficult to remove from the build plate on",
"I think she may be on to something. Is this",
"be on to something. Is this safe? Good idea? Bad",
"difficult to remove from the build plate on my Micro3D",
"to something. Is this safe? Good idea? Bad idea? Heresay?",
"I was initially appalled at the idea, but now I",
"the underside of the plate. I was initially appalled at",
"of the plate. I was initially appalled at the idea,",
"appalled at the idea, but now I think she may",
"the idea, but now I think she may be on",
"plate. I was initially appalled at the idea, but now",
"she may be on to something. Is this safe? Good",
"on the underside of the plate. I was initially appalled",
"Micro3D printer. My wife suggested using a hair dryer on",
"hair dryer on the underside of the plate. I was",
"a hair dryer on the underside of the plate. I",
"from the build plate on my Micro3D printer. My wife",
"the plate. I was initially appalled at the idea, but",
"I often have trouble with prints being especially difficult to",
"at the idea, but now I think she may be",
"with prints being especially difficult to remove from the build",
"may be on to something. Is this safe? Good idea?",
"but now I think she may be on to something.",
"printer. My wife suggested using a hair dryer on the",
"on my Micro3D printer. My wife suggested using a hair",
"especially difficult to remove from the build plate on my",
"on to something. Is this safe? Good idea? Bad idea?",
"was initially appalled at the idea, but now I think",
"the build plate on my Micro3D printer. My wife suggested",
"prints being especially difficult to remove from the build plate",
"remove from the build plate on my Micro3D printer. My",
"initially appalled at the idea, but now I think she",
"now I think she may be on to something. Is",
"often have trouble with prints being especially difficult to remove",
"trouble with prints being especially difficult to remove from the",
"suggested using a hair dryer on the underside of the",
"have trouble with prints being especially difficult to remove from",
"underside of the plate. I was initially appalled at the"
] |
[
"PLUS. Everything prints and functions fine via SD card and",
"my Mac computer the printer seems to restart. * Baud",
"Wanhao Duplicator i3 PLUS. Everything prints and functions fine via",
"and functions fine via SD card and the display but",
"Baud Rate: 115200 * Serial Port: `/dev/tty.wchusbserial1420` Any ideas what",
"when connecting to my Mac computer the printer seems to",
"printer seems to restart. * Baud Rate: 115200 * Serial",
"to restart. * Baud Rate: 115200 * Serial Port: `/dev/tty.wchusbserial1420`",
"prints and functions fine via SD card and the display",
"* Serial Port: `/dev/tty.wchusbserial1420` Any ideas what it could be?",
"functions fine via SD card and the display but when",
"to my Mac computer the printer seems to restart. *",
"the printer seems to restart. * Baud Rate: 115200 *",
"and the display but when connecting to my Mac computer",
"i3 PLUS. Everything prints and functions fine via SD card",
"computer the printer seems to restart. * Baud Rate: 115200",
"115200 * Serial Port: `/dev/tty.wchusbserial1420` Any ideas what it could",
"Everything prints and functions fine via SD card and the",
"display but when connecting to my Mac computer the printer",
"connecting to my Mac computer the printer seems to restart.",
"fine via SD card and the display but when connecting",
"just received my Wanhao Duplicator i3 PLUS. Everything prints and",
"SD card and the display but when connecting to my",
"the display but when connecting to my Mac computer the",
"Duplicator i3 PLUS. Everything prints and functions fine via SD",
"card and the display but when connecting to my Mac",
"Mac computer the printer seems to restart. * Baud Rate:",
"Rate: 115200 * Serial Port: `/dev/tty.wchusbserial1420` Any ideas what it",
"restart. * Baud Rate: 115200 * Serial Port: `/dev/tty.wchusbserial1420` Any",
"my Wanhao Duplicator i3 PLUS. Everything prints and functions fine",
"but when connecting to my Mac computer the printer seems",
"I just received my Wanhao Duplicator i3 PLUS. Everything prints",
"seems to restart. * Baud Rate: 115200 * Serial Port:",
"* Baud Rate: 115200 * Serial Port: `/dev/tty.wchusbserial1420` Any ideas",
"via SD card and the display but when connecting to",
"received my Wanhao Duplicator i3 PLUS. Everything prints and functions"
] |
[
"idea how one would do this with a RAMPs 1.4",
"up a Mains Based heat bed. Any idea how one",
"how one would do this with a RAMPs 1.4 board;",
"SSR to wire up a Mains Based heat bed. Any",
"wire up a Mains Based heat bed. Any idea how",
"would do this with a RAMPs 1.4 board; Also, what",
"to wire up a Mains Based heat bed. Any idea",
"I was [advised](https://3dprinting.stackexchange.com/questions/1536/what-does-uses-mains-voltage-mean-on-this-200200mm-square-silicone-heater-pad) that it would be possible to use",
"would be possible to use an AC SSR to wire",
"that it would be possible to use an AC SSR",
"one would do this with a RAMPs 1.4 board; Also,",
"board; Also, what do I hook a heated bed of",
"Also, what do I hook a heated bed of this",
"with a RAMPs 1.4 board; Also, what do I hook",
"AC SSR to wire up a Mains Based heat bed.",
"heat bed. Any idea how one would do this with",
"this with a RAMPs 1.4 board; Also, what do I",
"it would be possible to use an AC SSR to",
"be possible to use an AC SSR to wire up",
"an AC SSR to wire up a Mains Based heat",
"was [advised](https://3dprinting.stackexchange.com/questions/1536/what-does-uses-mains-voltage-mean-on-this-200200mm-square-silicone-heater-pad) that it would be possible to use an",
"Mains Based heat bed. Any idea how one would do",
"Any idea how one would do this with a RAMPs",
"what do I hook a heated bed of this sort",
"[advised](https://3dprinting.stackexchange.com/questions/1536/what-does-uses-mains-voltage-mean-on-this-200200mm-square-silicone-heater-pad) that it would be possible to use an AC",
"a RAMPs 1.4 board; Also, what do I hook a",
"Based heat bed. Any idea how one would do this",
"do I hook a heated bed of this sort into?",
"do this with a RAMPs 1.4 board; Also, what do",
"RAMPs 1.4 board; Also, what do I hook a heated",
"a Mains Based heat bed. Any idea how one would",
"bed. Any idea how one would do this with a",
"use an AC SSR to wire up a Mains Based",
"possible to use an AC SSR to wire up a",
"1.4 board; Also, what do I hook a heated bed",
"to use an AC SSR to wire up a Mains"
] |
[
"this, but I'm not entirely sure about it: 1. If",
"works like this, but I'm not entirely sure about it:",
"not signaling 1. subtract 100 steps from axis. 3. while",
"subtract 100 steps from axis. 3. while endstops are not",
"axis. 3. while endstops are not signaling, or if point",
"endstops are not signaling, or if point 0,0,0 not reached;",
"I have a feeling that it works like this, but",
"If none of the end stops are activated; assume you",
"you are somewhere between Max-X, Max-Y, Max-Z and the point",
"Axies 1. If axis endstop not signaling 1. subtract 100",
"entirely sure about it: 1. If none of the end",
"what process does the Prusa i3 determine it's home position?",
"it works like this, but I'm not entirely sure about",
"a feeling that it works like this, but I'm not",
"it: 1. If none of the end stops are activated;",
"are somewhere between Max-X, Max-Y, Max-Z and the point 0,0,0.",
"Max-Z and the point 0,0,0. 2. do 1. For axis",
"steps from axis. 3. while endstops are not signaling, or",
"1. If none of the end stops are activated; assume",
"description here](https://i.stack.imgur.com/Fpc5P.jpg)](https://i.stack.imgur.com/Fpc5P.jpg) By what process does the Prusa i3 determine",
"If axis endstop not signaling 1. subtract 100 steps from",
"the Prusa i3 determine it's home position? I have a",
"3. while endstops are not signaling, or if point 0,0,0",
"and the point 0,0,0. 2. do 1. For axis in",
"of the end stops are activated; assume you are somewhere",
"100 steps from axis. 3. while endstops are not signaling,",
"Max-Y, Max-Z and the point 0,0,0. 2. do 1. For",
"that it works like this, but I'm not entirely sure",
"not entirely sure about it: 1. If none of the",
"point 0,0,0. 2. do 1. For axis in Axies 1.",
"between Max-X, Max-Y, Max-Z and the point 0,0,0. 2. do",
"axis in Axies 1. If axis endstop not signaling 1.",
"while endstops are not signaling, or if point 0,0,0 not",
"For axis in Axies 1. If axis endstop not signaling",
"i3 determine it's home position? I have a feeling that",
"image description here](https://i.stack.imgur.com/Fpc5P.jpg)](https://i.stack.imgur.com/Fpc5P.jpg) By what process does the Prusa i3",
"stops are activated; assume you are somewhere between Max-X, Max-Y,",
"[](https://i.stack.imgur.com/Fpc5P.jpg) By what process does the Prusa",
"process does the Prusa i3 determine it's home position? I",
"about it: 1. If none of the end stops are",
"endstop not signaling 1. subtract 100 steps from axis. 3.",
"position? I have a feeling that it works like this,",
"assume you are somewhere between Max-X, Max-Y, Max-Z and the",
"the point 0,0,0. 2. do 1. For axis in Axies",
"like this, but I'm not entirely sure about it: 1.",
"have a feeling that it works like this, but I'm",
"are activated; assume you are somewhere between Max-X, Max-Y, Max-Z",
"Max-X, Max-Y, Max-Z and the point 0,0,0. 2. do 1.",
"but I'm not entirely sure about it: 1. If none",
"none of the end stops are activated; assume you are",
"By what process does the Prusa i3 determine it's home",
"do 1. For axis in Axies 1. If axis endstop",
"home position? I have a feeling that it works like",
"signaling 1. subtract 100 steps from axis. 3. while endstops",
"end stops are activated; assume you are somewhere between Max-X,",
"from axis. 3. while endstops are not signaling, or if",
"I'm not entirely sure about it: 1. If none of",
"determine it's home position? I have a feeling that it",
"activated; assume you are somewhere between Max-X, Max-Y, Max-Z and",
"somewhere between Max-X, Max-Y, Max-Z and the point 0,0,0. 2.",
"here](https://i.stack.imgur.com/Fpc5P.jpg)](https://i.stack.imgur.com/Fpc5P.jpg) By what process does the Prusa i3 determine it's",
"Prusa i3 determine it's home position? I have a feeling",
"in Axies 1. If axis endstop not signaling 1. subtract",
"sure about it: 1. If none of the end stops",
"the end stops are activated; assume you are somewhere between",
"0,0,0. 2. do 1. For axis in Axies 1. If",
"axis endstop not signaling 1. subtract 100 steps from axis.",
"feeling that it works like this, but I'm not entirely",
"1. subtract 100 steps from axis. 3. while endstops are",
"does the Prusa i3 determine it's home position? I have",
"2. do 1. For axis in Axies 1. If axis",
"1. If axis endstop not signaling 1. subtract 100 steps",
"it's home position? I have a feeling that it works",
"1. For axis in Axies 1. If axis endstop not"
] |
[
"the nozzle. However I can still see the gear moving.",
"to get press fit parts with my current settings. I",
"settings. I am using Ramps 1.4 hardware and repetier software",
"Ramps 1.4 hardware and repetier software and cura as my",
"with a .2 mm layer height right now but would",
"a better number such as .1 or .09. When I",
"but I haven't found anything that fixed the problem yet.",
"can still see the gear moving. I have check some",
"the print the filament stops coming out of the nozzle.",
"When I try to print with say .1mm layer height",
"I haven't found anything that fixed the problem yet. How",
"with my current settings. I am using Ramps 1.4 hardware",
"the problem yet. How or what setting need to be",
"moving. I have check some sites that I have been",
"better number such as .1 or .09. When I try",
"the filament stops coming out of the nozzle. However I",
".1mm layer height in the middle of the print the",
".09. When I try to print with say .1mm layer",
"layer height right now but would like to get a",
"or .09. When I try to print with say .1mm",
"coming out of the nozzle. However I can still see",
"printing with a .2 mm layer height right now but",
"with say .1mm layer height in the middle of the",
"a .2 mm layer height right now but would like",
"still see the gear moving. I have check some sites",
"print the filament stops coming out of the nozzle. However",
"gear moving. I have check some sites that I have",
".1 or .09. When I try to print with say",
"able to get press fit parts with my current settings.",
"I am using Ramps 1.4 hardware and repetier software and",
"but would like to get a better number such as",
"as .1 or .09. When I try to print with",
"am printing with a .2 mm layer height right now",
"stops coming out of the nozzle. However I can still",
"height in the middle of the print the filament stops",
"to get a better number such as .1 or .09.",
"I am printing with a .2 mm layer height right",
"I3 I am currently able to get press fit parts",
"layer height in the middle of the print the filament",
"However I can still see the gear moving. I have",
"I can still see the gear moving. I have check",
"filament stops coming out of the nozzle. However I can",
"have been using for troubleshooting but I haven't found anything",
"for troubleshooting but I haven't found anything that fixed the",
"would like to get a better number such as .1",
"been using for troubleshooting but I haven't found anything that",
"to be changed in order to print with better resolution?",
"using for troubleshooting but I haven't found anything that fixed",
"such as .1 or .09. When I try to print",
"I have a Prusa I3 I am currently able to",
"fixed the problem yet. How or what setting need to",
"software and cura as my slicer. I am printing with",
".2 mm layer height right now but would like to",
"the middle of the print the filament stops coming out",
"I am currently able to get press fit parts with",
"yet. How or what setting need to be changed in",
"haven't found anything that fixed the problem yet. How or",
"press fit parts with my current settings. I am using",
"anything that fixed the problem yet. How or what setting",
"some sites that I have been using for troubleshooting but",
"number such as .1 or .09. When I try to",
"now but would like to get a better number such",
"and cura as my slicer. I am printing with a",
"have check some sites that I have been using for",
"using Ramps 1.4 hardware and repetier software and cura as",
"slicer. I am printing with a .2 mm layer height",
"hardware and repetier software and cura as my slicer. I",
"found anything that fixed the problem yet. How or what",
"try to print with say .1mm layer height in the",
"I have been using for troubleshooting but I haven't found",
"right now but would like to get a better number",
"what setting need to be changed in order to print",
"my slicer. I am printing with a .2 mm layer",
"height right now but would like to get a better",
"currently able to get press fit parts with my current",
"nozzle. However I can still see the gear moving. I",
"mm layer height right now but would like to get",
"parts with my current settings. I am using Ramps 1.4",
"my current settings. I am using Ramps 1.4 hardware and",
"current settings. I am using Ramps 1.4 hardware and repetier",
"Hello I have a Prusa I3 I am currently able",
"that I have been using for troubleshooting but I haven't",
"a Prusa I3 I am currently able to get press",
"in the middle of the print the filament stops coming",
"troubleshooting but I haven't found anything that fixed the problem",
"fit parts with my current settings. I am using Ramps",
"out of the nozzle. However I can still see the",
"sites that I have been using for troubleshooting but I",
"repetier software and cura as my slicer. I am printing",
"How or what setting need to be changed in order",
"the gear moving. I have check some sites that I",
"say .1mm layer height in the middle of the print",
"or what setting need to be changed in order to",
"I have check some sites that I have been using",
"cura as my slicer. I am printing with a .2",
"need to be changed in order to print with better",
"problem yet. How or what setting need to be changed",
"see the gear moving. I have check some sites that",
"have a Prusa I3 I am currently able to get",
"am using Ramps 1.4 hardware and repetier software and cura",
"of the print the filament stops coming out of the",
"1.4 hardware and repetier software and cura as my slicer.",
"and repetier software and cura as my slicer. I am",
"middle of the print the filament stops coming out of",
"I try to print with say .1mm layer height in",
"Prusa I3 I am currently able to get press fit",
"check some sites that I have been using for troubleshooting",
"print with say .1mm layer height in the middle of",
"am currently able to get press fit parts with my",
"get a better number such as .1 or .09. When",
"that fixed the problem yet. How or what setting need",
"as my slicer. I am printing with a .2 mm",
"setting need to be changed in order to print with",
"to print with say .1mm layer height in the middle",
"like to get a better number such as .1 or",
"of the nozzle. However I can still see the gear",
"get press fit parts with my current settings. I am"
] |
[
"Repetier-Host and CuraEngine as Slicer, but I really would like",
"190 mm and the glass plate diameter is 120 mm.",
"a delta 3D printer. The problem is that, at the",
"and go back to printing again? Can this be done",
"surface (glass plate) by 10mm, extrude the bad filament and",
"of my prints! How can I make the hotend exit",
"+ Ramps 1.4. I'm using Repetier-Host and CuraEngine as Slicer,",
"filament flow at the start of my prints! How can",
"Slicer, but I really would like a G-code that can",
"printer. The problem is that, at the beginning of a",
"filament. I want a clean filament flow at the start",
"G-code? My Z high is 190 mm and the glass",
"printing again? Can this be done with G-code? My Z",
"mm and the glass plate diameter is 120 mm. I'm",
"a clean filament flow at the start of my prints!",
"problem is that, at the beginning of a print the",
"clean filament flow at the start of my prints! How",
"that, at the beginning of a print the extruder outputs",
"a print the extruder outputs dirty filament. I want a",
"(glass plate) by 10mm, extrude the bad filament and go",
"Cura and Repetier. I just want to add it to",
"I just want to add it to the start G-code",
"of a print the extruder outputs dirty filament. I want",
"extruder outputs dirty filament. I want a clean filament flow",
"at the beginning of a print the extruder outputs dirty",
"done with G-code? My Z high is 190 mm and",
"really would like a G-code that can work on multiple",
"by 10mm, extrude the bad filament and go back to",
"3D printer. The problem is that, at the beginning of",
"the hotend exit the print surface (glass plate) by 10mm,",
"I'm using Repetier-Host and CuraEngine as Slicer, but I really",
"print the extruder outputs dirty filament. I want a clean",
"and Repetier. I just want to add it to the",
"I make the hotend exit the print surface (glass plate)",
"is that, at the beginning of a print the extruder",
"bad filament and go back to printing again? Can this",
"with G-code? My Z high is 190 mm and the",
"multiple environments like Cura and Repetier. I just want to",
"plate) by 10mm, extrude the bad filament and go back",
"The problem is that, at the beginning of a print",
"I own a delta 3D printer. The problem is that,",
"can work on multiple environments like Cura and Repetier. I",
"CuraEngine as Slicer, but I really would like a G-code",
"start of my prints! How can I make the hotend",
"delta 3D printer. The problem is that, at the beginning",
"work on multiple environments like Cura and Repetier. I just",
"filament and go back to printing again? Can this be",
"high is 190 mm and the glass plate diameter is",
"Can this be done with G-code? My Z high is",
"environments like Cura and Repetier. I just want to add",
"mm. I'm using Marlin + Ramps 1.4. I'm using Repetier-Host",
"want a clean filament flow at the start of my",
"120 mm. I'm using Marlin + Ramps 1.4. I'm using",
"G-code that can work on multiple environments like Cura and",
"this be done with G-code? My Z high is 190",
"extrude the bad filament and go back to printing again?",
"like a G-code that can work on multiple environments like",
"Repetier. I just want to add it to the start",
"I'm using Marlin + Ramps 1.4. I'm using Repetier-Host and",
"the print surface (glass plate) by 10mm, extrude the bad",
"be done with G-code? My Z high is 190 mm",
"prints! How can I make the hotend exit the print",
"and CuraEngine as Slicer, but I really would like a",
"the glass plate diameter is 120 mm. I'm using Marlin",
"I really would like a G-code that can work on",
"My Z high is 190 mm and the glass plate",
"as Slicer, but I really would like a G-code that",
"diameter is 120 mm. I'm using Marlin + Ramps 1.4.",
"the beginning of a print the extruder outputs dirty filament.",
"own a delta 3D printer. The problem is that, at",
"flow at the start of my prints! How can I",
"beginning of a print the extruder outputs dirty filament. I",
"can I make the hotend exit the print surface (glass",
"is 120 mm. I'm using Marlin + Ramps 1.4. I'm",
"and the glass plate diameter is 120 mm. I'm using",
"would like a G-code that can work on multiple environments",
"to printing again? Can this be done with G-code? My",
"want to add it to the start G-code and print!",
"but I really would like a G-code that can work",
"again? Can this be done with G-code? My Z high",
"like Cura and Repetier. I just want to add it",
"is 190 mm and the glass plate diameter is 120",
"on multiple environments like Cura and Repetier. I just want",
"hotend exit the print surface (glass plate) by 10mm, extrude",
"make the hotend exit the print surface (glass plate) by",
"at the start of my prints! How can I make",
"Z high is 190 mm and the glass plate diameter",
"a G-code that can work on multiple environments like Cura",
"go back to printing again? Can this be done with",
"back to printing again? Can this be done with G-code?",
"glass plate diameter is 120 mm. I'm using Marlin +",
"dirty filament. I want a clean filament flow at the",
"1.4. I'm using Repetier-Host and CuraEngine as Slicer, but I",
"just want to add it to the start G-code and",
"How can I make the hotend exit the print surface",
"the bad filament and go back to printing again? Can",
"exit the print surface (glass plate) by 10mm, extrude the",
"using Repetier-Host and CuraEngine as Slicer, but I really would",
"plate diameter is 120 mm. I'm using Marlin + Ramps",
"I want a clean filament flow at the start of",
"Marlin + Ramps 1.4. I'm using Repetier-Host and CuraEngine as",
"outputs dirty filament. I want a clean filament flow at",
"the start of my prints! How can I make the",
"my prints! How can I make the hotend exit the",
"that can work on multiple environments like Cura and Repetier.",
"print surface (glass plate) by 10mm, extrude the bad filament",
"the extruder outputs dirty filament. I want a clean filament",
"using Marlin + Ramps 1.4. I'm using Repetier-Host and CuraEngine",
"10mm, extrude the bad filament and go back to printing",
"Ramps 1.4. I'm using Repetier-Host and CuraEngine as Slicer, but"
] |
[
"enclosure, which will have a PCB inside with some LED",
"here](https://i.stack.imgur.com/eUN2v.jpg)](https://i.stack.imgur.com/eUN2v.jpg) WHen the LED turns on, it looks like this",
"to print an enclosure, which will have a PCB inside",
"be achieved? What material and technique? When LEDs are off,",
"if it is possible to 3D print the enclosure such",
"image description here](https://i.stack.imgur.com/eUN2v.jpg)](https://i.stack.imgur.com/eUN2v.jpg) WHen the LED turns on, it looks",
"it looks like this (illuminated symbols): [](https://i.stack.imgur.com/X9GuC.jpg)",
"inside with some LED indicators. I was wondering if it",
"it looks something like this: [](https://i.stack.imgur.com/eUN2v.jpg) WHen",
"looking to print an enclosure, which will have a PCB",
"it is possible to 3D print the enclosure such that",
"description here](https://i.stack.imgur.com/eUN2v.jpg)](https://i.stack.imgur.com/eUN2v.jpg) WHen the LED turns on, it looks like",
"turns on, it looks like this (illuminated symbols): [](https://i.stack.imgur.com/eUN2v.jpg) WHen the LED turns on,",
"which will have a PCB inside with some LED indicators.",
"are off, it looks something like this: [](https://i.stack.imgur.com/eUN2v.jpg) WHen the LED",
"off, it looks something like this: [](https://i.stack.imgur.com/eUN2v.jpg)",
"PCB inside with some LED indicators. I was wondering if",
"the enclosure such that the following look can be achieved?",
"wondering if it is possible to 3D print the enclosure",
"possible to 3D print the enclosure such that the following",
"LED turns on, it looks like this (illuminated symbols): [](https://i.stack.imgur.com/eUN2v.jpg) WHen the LED turns",
"with some LED indicators. I was wondering if it is",
"following look can be achieved? What material and technique? When",
"can be achieved? What material and technique? When LEDs are",
"that the following look can be achieved? What material and",
"looks something like this: [](https://i.stack.imgur.com/eUN2v.jpg) WHen the",
"some LED indicators. I was wondering if it is possible",
"print an enclosure, which will have a PCB inside with",
"[](https://i.stack.imgur.com/eUN2v.jpg) WHen the LED turns on, it",
"on, it looks like this (illuminated symbols): [![enter image description",
"and technique? When LEDs are off, it looks something like",
"LEDs are off, it looks something like this: [![enter image",
"was wondering if it is possible to 3D print the",
"I am looking to print an enclosure, which will have",
"will have a PCB inside with some LED indicators. I",
"is possible to 3D print the enclosure such that the",
"WHen the LED turns on, it looks like this (illuminated",
"I was wondering if it is possible to 3D print"
] |
[
"extruder (Mk10 on a FlashForge Creator X) for an all-metal",
"in [this question](https://3dprinting.stackexchange.com/questions/1205/increased-issues-with-filament-grinding), where the PTFE tube feeding my filament",
"and became discolored: what are the advantages and disadvantages of",
"advantages and disadvantages of changing out my extruder (Mk10 on",
"all-metal solution like the one advertised [here (by Micro-Swiss)](https://store.micro-swiss.com/products/micro-swiss-mk10-all-metal-hotend-kit). I",
"the one advertised [here (by Micro-Swiss)](https://store.micro-swiss.com/products/micro-swiss-mk10-all-metal-hotend-kit). I understand that the",
"print higher-temperature materials (like nylon), but I'm also trying to",
"an issue I had in [this question](https://3dprinting.stackexchange.com/questions/1205/increased-issues-with-filament-grinding), where the PTFE",
"the metal tip of the extruder clogged and became discolored:",
"metal tip of the extruder clogged and became discolored: what",
"became discolored: what are the advantages and disadvantages of changing",
"Creator X) for an all-metal solution like the one advertised",
"an all-metal solution like the one advertised [here (by Micro-Swiss)](https://store.micro-swiss.com/products/micro-swiss-mk10-all-metal-hotend-kit).",
"feeding my filament to the metal tip of the extruder",
"one advertised [here (by Micro-Swiss)](https://store.micro-swiss.com/products/micro-swiss-mk10-all-metal-hotend-kit). I understand that the conversion",
"my extruder (Mk10 on a FlashForge Creator X) for an",
"allow me to print higher-temperature materials (like nylon), but I'm",
"me to print higher-temperature materials (like nylon), but I'm also",
"(by Micro-Swiss)](https://store.micro-swiss.com/products/micro-swiss-mk10-all-metal-hotend-kit). I understand that the conversion would allow me",
"had in [this question](https://3dprinting.stackexchange.com/questions/1205/increased-issues-with-filament-grinding), where the PTFE tube feeding my",
"figure out the trade-offs with regard to printing PLA/ABS parts.",
"(Mk10 on a FlashForge Creator X) for an all-metal solution",
"to an issue I had in [this question](https://3dprinting.stackexchange.com/questions/1205/increased-issues-with-filament-grinding), where the",
"I'm also trying to figure out the trade-offs with regard",
"the advantages and disadvantages of changing out my extruder (Mk10",
"a FlashForge Creator X) for an all-metal solution like the",
"nylon), but I'm also trying to figure out the trade-offs",
"for an all-metal solution like the one advertised [here (by",
"extruder clogged and became discolored: what are the advantages and",
"I understand that the conversion would allow me to print",
"higher-temperature materials (like nylon), but I'm also trying to figure",
"I had in [this question](https://3dprinting.stackexchange.com/questions/1205/increased-issues-with-filament-grinding), where the PTFE tube feeding",
"filament to the metal tip of the extruder clogged and",
"materials (like nylon), but I'm also trying to figure out",
"to the metal tip of the extruder clogged and became",
"discolored: what are the advantages and disadvantages of changing out",
"Micro-Swiss)](https://store.micro-swiss.com/products/micro-swiss-mk10-all-metal-hotend-kit). I understand that the conversion would allow me to",
"understand that the conversion would allow me to print higher-temperature",
"but I'm also trying to figure out the trade-offs with",
"issue I had in [this question](https://3dprinting.stackexchange.com/questions/1205/increased-issues-with-filament-grinding), where the PTFE tube",
"solution like the one advertised [here (by Micro-Swiss)](https://store.micro-swiss.com/products/micro-swiss-mk10-all-metal-hotend-kit). I understand",
"also trying to figure out the trade-offs with regard to",
"my filament to the metal tip of the extruder clogged",
"clogged and became discolored: what are the advantages and disadvantages",
"like the one advertised [here (by Micro-Swiss)](https://store.micro-swiss.com/products/micro-swiss-mk10-all-metal-hotend-kit). I understand that",
"where the PTFE tube feeding my filament to the metal",
"X) for an all-metal solution like the one advertised [here",
"[here (by Micro-Swiss)](https://store.micro-swiss.com/products/micro-swiss-mk10-all-metal-hotend-kit). I understand that the conversion would allow",
"are the advantages and disadvantages of changing out my extruder",
"to print higher-temperature materials (like nylon), but I'm also trying",
"tube feeding my filament to the metal tip of the",
"would allow me to print higher-temperature materials (like nylon), but",
"out my extruder (Mk10 on a FlashForge Creator X) for",
"the conversion would allow me to print higher-temperature materials (like",
"conversion would allow me to print higher-temperature materials (like nylon),",
"trying to figure out the trade-offs with regard to printing",
"the extruder clogged and became discolored: what are the advantages",
"PTFE tube feeding my filament to the metal tip of",
"on a FlashForge Creator X) for an all-metal solution like",
"of the extruder clogged and became discolored: what are the",
"question](https://3dprinting.stackexchange.com/questions/1205/increased-issues-with-filament-grinding), where the PTFE tube feeding my filament to the",
"advertised [here (by Micro-Swiss)](https://store.micro-swiss.com/products/micro-swiss-mk10-all-metal-hotend-kit). I understand that the conversion would",
"what are the advantages and disadvantages of changing out my",
"of changing out my extruder (Mk10 on a FlashForge Creator",
"(like nylon), but I'm also trying to figure out the",
"to figure out the trade-offs with regard to printing PLA/ABS",
"disadvantages of changing out my extruder (Mk10 on a FlashForge",
"tip of the extruder clogged and became discolored: what are",
"Related to an issue I had in [this question](https://3dprinting.stackexchange.com/questions/1205/increased-issues-with-filament-grinding), where",
"the PTFE tube feeding my filament to the metal tip",
"that the conversion would allow me to print higher-temperature materials",
"and disadvantages of changing out my extruder (Mk10 on a",
"changing out my extruder (Mk10 on a FlashForge Creator X)",
"FlashForge Creator X) for an all-metal solution like the one",
"[this question](https://3dprinting.stackexchange.com/questions/1205/increased-issues-with-filament-grinding), where the PTFE tube feeding my filament to"
] |
[
"this would also make it easier to take them off",
"without needing to re-level the bed every time as the",
"to print on? (withstand the heat, be flat enough, etc)",
"picture frames and using the glass from them as interchangeable",
"the bed every time as the aluminum base would stay-put.",
"purple-glue-stick as I have heard that works well for adhesion",
"well for adhesion purposes. For reference: Printing PLA, Prusia i3",
"take them off the printer to clean without needing to",
"a really hard time printing on my aluminum heated bed...",
"etc) I'm planning to coat it in purple-glue-stick as I",
"and I don't think it is particularly flat either. I",
"(trying to scrape dried hairspray/glue/etc off) and I don't think",
"for adhesion purposes. For reference: Printing PLA, Prusia i3 printer.",
"needing to re-level the bed every time as the aluminum",
"results in it being scratched (trying to scrape dried hairspray/glue/etc",
"dried hairspray/glue/etc off) and I don't think it is particularly",
"be okay to print on? (withstand the heat, be flat",
"them as interchangeable glass beds - this would also make",
"easier to take them off the printer to clean without",
"off the printer to clean without needing to re-level the",
"from them as interchangeable glass beds - this would also",
"my way home and getting several picture frames and using",
"okay to print on? (withstand the heat, be flat enough,",
"don't think it is particularly flat either. I was thinking",
"print on? (withstand the heat, be flat enough, etc) I'm",
"home and getting several picture frames and using the glass",
"to take them off the printer to clean without needing",
"to scrape dried hairspray/glue/etc off) and I don't think it",
"my aluminum heated bed... Cleaning it just results in it",
"of stopping by the dollar store on my way home",
"I'm planning to coat it in purple-glue-stick as I have",
"in purple-glue-stick as I have heard that works well for",
"printer to clean without needing to re-level the bed every",
"to coat it in purple-glue-stick as I have heard that",
"by the dollar store on my way home and getting",
"on? (withstand the heat, be flat enough, etc) I'm planning",
"it would be okay to print on? (withstand the heat,",
"just results in it being scratched (trying to scrape dried",
"every time as the aluminum base would stay-put. Do you",
"that works well for adhesion purposes. For reference: Printing PLA,",
"- this would also make it easier to take them",
"frames and using the glass from them as interchangeable glass",
"hard time printing on my aluminum heated bed... Cleaning it",
"was thinking of stopping by the dollar store on my",
"quality of it would be okay to print on? (withstand",
"heat, be flat enough, etc) I'm planning to coat it",
"glass from them as interchangeable glass beds - this would",
"bed every time as the aluminum base would stay-put. Do",
"think the quality of it would be okay to print",
"clean without needing to re-level the bed every time as",
"hairspray/glue/etc off) and I don't think it is particularly flat",
"you guys think the quality of it would be okay",
"as I have heard that works well for adhesion purposes.",
"either. I was thinking of stopping by the dollar store",
"way home and getting several picture frames and using the",
"having a really hard time printing on my aluminum heated",
"would be okay to print on? (withstand the heat, be",
"scratched (trying to scrape dried hairspray/glue/etc off) and I don't",
"beds - this would also make it easier to take",
"interchangeable glass beds - this would also make it easier",
"have heard that works well for adhesion purposes. For reference:",
"(withstand the heat, be flat enough, etc) I'm planning to",
"planning to coat it in purple-glue-stick as I have heard",
"think it is particularly flat either. I was thinking of",
"the aluminum base would stay-put. Do you guys think the",
"stopping by the dollar store on my way home and",
"printing on my aluminum heated bed... Cleaning it just results",
"I'm having a really hard time printing on my aluminum",
"would also make it easier to take them off the",
"flat enough, etc) I'm planning to coat it in purple-glue-stick",
"Do you guys think the quality of it would be",
"as the aluminum base would stay-put. Do you guys think",
"glass beds - this would also make it easier to",
"time as the aluminum base would stay-put. Do you guys",
"store on my way home and getting several picture frames",
"using the glass from them as interchangeable glass beds -",
"is particularly flat either. I was thinking of stopping by",
"to re-level the bed every time as the aluminum base",
"it in purple-glue-stick as I have heard that works well",
"Cleaning it just results in it being scratched (trying to",
"and getting several picture frames and using the glass from",
"stay-put. Do you guys think the quality of it would",
"in it being scratched (trying to scrape dried hairspray/glue/etc off)",
"aluminum heated bed... Cleaning it just results in it being",
"off) and I don't think it is particularly flat either.",
"coat it in purple-glue-stick as I have heard that works",
"I have heard that works well for adhesion purposes. For",
"particularly flat either. I was thinking of stopping by the",
"and using the glass from them as interchangeable glass beds",
"on my aluminum heated bed... Cleaning it just results in",
"it just results in it being scratched (trying to scrape",
"flat either. I was thinking of stopping by the dollar",
"as interchangeable glass beds - this would also make it",
"dollar store on my way home and getting several picture",
"heated bed... Cleaning it just results in it being scratched",
"also make it easier to take them off the printer",
"the heat, be flat enough, etc) I'm planning to coat",
"guys think the quality of it would be okay to",
"be flat enough, etc) I'm planning to coat it in",
"aluminum base would stay-put. Do you guys think the quality",
"the printer to clean without needing to re-level the bed",
"it is particularly flat either. I was thinking of stopping",
"bed... Cleaning it just results in it being scratched (trying",
"to clean without needing to re-level the bed every time",
"the dollar store on my way home and getting several",
"thinking of stopping by the dollar store on my way",
"enough, etc) I'm planning to coat it in purple-glue-stick as",
"time printing on my aluminum heated bed... Cleaning it just",
"scrape dried hairspray/glue/etc off) and I don't think it is",
"I don't think it is particularly flat either. I was",
"works well for adhesion purposes. For reference: Printing PLA, Prusia",
"getting several picture frames and using the glass from them",
"I was thinking of stopping by the dollar store on",
"on my way home and getting several picture frames and",
"base would stay-put. Do you guys think the quality of",
"heard that works well for adhesion purposes. For reference: Printing",
"would stay-put. Do you guys think the quality of it",
"it being scratched (trying to scrape dried hairspray/glue/etc off) and",
"re-level the bed every time as the aluminum base would",
"really hard time printing on my aluminum heated bed... Cleaning",
"them off the printer to clean without needing to re-level",
"several picture frames and using the glass from them as",
"the quality of it would be okay to print on?",
"make it easier to take them off the printer to",
"the glass from them as interchangeable glass beds - this",
"being scratched (trying to scrape dried hairspray/glue/etc off) and I",
"of it would be okay to print on? (withstand the",
"it easier to take them off the printer to clean"
] |
[
"at 90c for long print times (ie multiple hours). Is",
"common 'sweet spot' for operating temperature? Does it depend on",
"keep a large slab of, say, aluminium at 90c for",
"print times (ie multiple hours). Is there a common 'sweet",
"for long print times (ie multiple hours). Is there a",
"to keep a large slab of, say, aluminium at 90c",
"using a heated bed with your printer, I have seen",
"seems like a fairly high power use to keep a",
"of running temperatures of 90c throughout the print. That seems",
"the print. That seems like a fairly high power use",
"a large slab of, say, aluminium at 90c for long",
"use to keep a large slab of, say, aluminium at",
"for operating temperature? Does it depend on material? Is a",
"seen claims of running temperatures of 90c throughout the print.",
"throughout the print. That seems like a fairly high power",
"90c for long print times (ie multiple hours). Is there",
"spot' for operating temperature? Does it depend on material? Is",
"have seen claims of running temperatures of 90c throughout the",
"of 90c throughout the print. That seems like a fairly",
"That seems like a fairly high power use to keep",
"of, say, aluminium at 90c for long print times (ie",
"a common 'sweet spot' for operating temperature? Does it depend",
"Does it depend on material? Is a heated bed required?",
"When using a heated bed with your printer, I have",
"like a fairly high power use to keep a large",
"hours). Is there a common 'sweet spot' for operating temperature?",
"printer, I have seen claims of running temperatures of 90c",
"your printer, I have seen claims of running temperatures of",
"multiple hours). Is there a common 'sweet spot' for operating",
"I have seen claims of running temperatures of 90c throughout",
"high power use to keep a large slab of, say,",
"temperatures of 90c throughout the print. That seems like a",
"aluminium at 90c for long print times (ie multiple hours).",
"fairly high power use to keep a large slab of,",
"operating temperature? Does it depend on material? Is a heated",
"say, aluminium at 90c for long print times (ie multiple",
"heated bed with your printer, I have seen claims of",
"times (ie multiple hours). Is there a common 'sweet spot'",
"claims of running temperatures of 90c throughout the print. That",
"slab of, say, aluminium at 90c for long print times",
"'sweet spot' for operating temperature? Does it depend on material?",
"90c throughout the print. That seems like a fairly high",
"a fairly high power use to keep a large slab",
"a heated bed with your printer, I have seen claims",
"print. That seems like a fairly high power use to",
"temperature? Does it depend on material? Is a heated bed",
"with your printer, I have seen claims of running temperatures",
"large slab of, say, aluminium at 90c for long print",
"there a common 'sweet spot' for operating temperature? Does it",
"(ie multiple hours). Is there a common 'sweet spot' for",
"Is there a common 'sweet spot' for operating temperature? Does",
"running temperatures of 90c throughout the print. That seems like",
"long print times (ie multiple hours). Is there a common",
"bed with your printer, I have seen claims of running",
"power use to keep a large slab of, say, aluminium"
] |
[
"- does anybody have an idea what could be the",
"always stops at 130°C - does anybody have an idea",
"at 130°C - does anybody have an idea what could",
"1.0.1, it always stops at 130°C - does anybody have",
"Repetier-Host Mac 1.0.1, it always stops at 130°C - does",
"German RepRap NEO 3D printer, and when I try heating",
"heating the Extruder to 215°C with Repetier-Host Mac 1.0.1, it",
"does anybody have an idea what could be the reason?",
"I have a new German RepRap NEO 3D printer, and",
"NEO 3D printer, and when I try heating the Extruder",
"printer, and when I try heating the Extruder to 215°C",
"215°C with Repetier-Host Mac 1.0.1, it always stops at 130°C",
"Extruder to 215°C with Repetier-Host Mac 1.0.1, it always stops",
"Mac 1.0.1, it always stops at 130°C - does anybody",
"have a new German RepRap NEO 3D printer, and when",
"to 215°C with Repetier-Host Mac 1.0.1, it always stops at",
"try heating the Extruder to 215°C with Repetier-Host Mac 1.0.1,",
"I try heating the Extruder to 215°C with Repetier-Host Mac",
"new German RepRap NEO 3D printer, and when I try",
"a new German RepRap NEO 3D printer, and when I",
"the Extruder to 215°C with Repetier-Host Mac 1.0.1, it always",
"3D printer, and when I try heating the Extruder to",
"when I try heating the Extruder to 215°C with Repetier-Host",
"RepRap NEO 3D printer, and when I try heating the",
"it always stops at 130°C - does anybody have an",
"and when I try heating the Extruder to 215°C with",
"130°C - does anybody have an idea what could be",
"stops at 130°C - does anybody have an idea what",
"with Repetier-Host Mac 1.0.1, it always stops at 130°C -"
] |
[
"Repetier and Slic3r and it is printing a gap between",
"Also, the infill is lifting (as in photo). Any advise?",
"perimeter and infill on the first layer. Also, the infill",
"and infill on the first layer. Also, the infill is",
"first layer. Also, the infill is lifting (as in photo).",
"on the first layer. Also, the infill is lifting (as",
"it is printing a gap between the perimeter and infill",
"using Repetier and Slic3r and it is printing a gap",
"is printing a gap between the perimeter and infill on",
"the infill is lifting (as in photo). Any advise? [](https://i.stack.imgur.com/mXJCl.jpg)",
"the perimeter and infill on the first layer. Also, the",
"gap between the perimeter and infill on the first layer.",
"a gap between the perimeter and infill on the first",
"layer. Also, the infill is lifting (as in photo). Any",
"printing a gap between the perimeter and infill on the",
"between the perimeter and infill on the first layer. Also,",
"the first layer. Also, the infill is lifting (as in",
"infill on the first layer. Also, the infill is lifting",
"I'm using Repetier and Slic3r and it is printing a",
"and Slic3r and it is printing a gap between the",
"and it is printing a gap between the perimeter and"
] |
[
"because it's just a cube but as the print reached",
"job done? I want the cube to be printed at",
"given percentage of job done? I want the cube to",
"at a slower speed. Is there any way I could",
"want the cube to be printed at 50 mm/s and",
"for which I want the base to be printed very",
"to print for which I want the base to be",
"percentage of job done? I want the cube to be",
"be printed at a slower speed. Is there any way",
"as the print reached around 70 % a complex circular",
"circular structure needs to be printed at a slower speed.",
"cube to be printed at 50 mm/s and the complex",
"to be printed at 50 mm/s and the complex circular",
"printed at a slower speed. Is there any way I",
"control the speed at the given percentage of job done?",
"I want the base to be printed very rapidly because",
"a object to print for which I want the base",
"mm/s and the complex circular structure at 40 mm/s. Printer",
"be printed very rapidly because it's just a cube but",
"printed at 50 mm/s and the complex circular structure at",
"complex circular structure at 40 mm/s. Printer Type - FDM",
"rapidly because it's just a cube but as the print",
"70 % a complex circular structure needs to be printed",
"any way I could control the speed at the given",
"print reached around 70 % a complex circular structure needs",
"could control the speed at the given percentage of job",
"I want the cube to be printed at 50 mm/s",
"of job done? I want the cube to be printed",
"speed. Is there any way I could control the speed",
"it's just a cube but as the print reached around",
"% a complex circular structure needs to be printed at",
"the complex circular structure at 40 mm/s. Printer Type -",
"the print reached around 70 % a complex circular structure",
"to be printed very rapidly because it's just a cube",
"the given percentage of job done? I want the cube",
"a slower speed. Is there any way I could control",
"50 mm/s and the complex circular structure at 40 mm/s.",
"have a object to print for which I want the",
"cube but as the print reached around 70 % a",
"structure needs to be printed at a slower speed. Is",
"print for which I want the base to be printed",
"speed at the given percentage of job done? I want",
"just a cube but as the print reached around 70",
"reached around 70 % a complex circular structure needs to",
"very rapidly because it's just a cube but as the",
"want the base to be printed very rapidly because it's",
"a cube but as the print reached around 70 %",
"at 50 mm/s and the complex circular structure at 40",
"be printed at 50 mm/s and the complex circular structure",
"the base to be printed very rapidly because it's just",
"around 70 % a complex circular structure needs to be",
"complex circular structure needs to be printed at a slower",
"the cube to be printed at 50 mm/s and the",
"and the complex circular structure at 40 mm/s. Printer Type",
"which I want the base to be printed very rapidly",
"I have a object to print for which I want",
"to be printed at a slower speed. Is there any",
"I could control the speed at the given percentage of",
"done? I want the cube to be printed at 50",
"at the given percentage of job done? I want the",
"but as the print reached around 70 % a complex",
"there any way I could control the speed at the",
"slower speed. Is there any way I could control the",
"way I could control the speed at the given percentage",
"needs to be printed at a slower speed. Is there",
"printed very rapidly because it's just a cube but as",
"Is there any way I could control the speed at",
"object to print for which I want the base to",
"base to be printed very rapidly because it's just a",
"the speed at the given percentage of job done? I",
"a complex circular structure needs to be printed at a"
] |
[
"belt driven axis](https://i.stack.imgur.com/8A21q.png)](https://i.stack.imgur.com/8A21q.png) I supposed it would but i'm not",
"to make a repstrap using paper printed parts, like this",
"DC motor in a paper printer carriage assembly with a",
"the carriage is limited in movement by the rails and",
"driven axis](https://i.stack.imgur.com/8A21q.png)](https://i.stack.imgur.com/8A21q.png) I supposed it would but i'm not sure",
"paper printer carriage assembly with a stepper motor (NEMA17). But",
"was not enough space to fit the axis of the",
"the axis are not in the same place. The question",
"and old belt driven axis](https://i.stack.imgur.com/8A21q.png)](https://i.stack.imgur.com/8A21q.png) I supposed it would but",
"make a repstrap using paper printed parts, like this guy",
"not sure since the carriage is limited in movement by",
"in the same place. The question is : if the",
"question is : if the axis is not in the",
"using paper printed parts, like this guy : <http://www.mariolukas.de/2012/05/repstrap-3d-drucker-aus-computerschrott-teil-1/> I",
"this guy : <http://www.mariolukas.de/2012/05/repstrap-3d-drucker-aus-computerschrott-teil-1/> I replaced the DC motor in",
"a stepper motor (NEMA17). But there was not enough space",
"not enough space to fit the axis of the nema",
"is limited in movement by the rails and that we",
"motor axis, in short, the axis are not in the",
"<http://www.mariolukas.de/2012/05/repstrap-3d-drucker-aus-computerschrott-teil-1/> I replaced the DC motor in a paper printer",
"are not in the same place. The question is :",
"replaced the DC motor in a paper printer carriage assembly",
"the rails and that we still move the belt around.",
"not in the exact same spot, will it affect the",
"the DC motor in a paper printer carriage assembly with",
"but i'm not sure since the carriage is limited in",
"printer carriage assembly with a stepper motor (NEMA17). But there",
"if the axis is not in the exact same spot,",
"But there was not enough space to fit the axis",
"17 at the exact spot of the older DC motor",
"The question is : if the axis is not in",
"at all ?[](https://i.stack.imgur.com/8A21q.png) I supposed",
"I supposed it would but i'm not sure since the",
"axis of the nema 17 at the exact spot of",
"I'm currently attempting to make a repstrap using paper printed",
"old belt driven axis](https://i.stack.imgur.com/8A21q.png)](https://i.stack.imgur.com/8A21q.png) I supposed it would but i'm",
"same spot, will it affect the movement of the carriage",
"movement by the rails and that we still move the",
"nema 17 at the exact spot of the older DC",
"a paper printer carriage assembly with a stepper motor (NEMA17).",
"by the rails and that we still move the belt",
"parts, like this guy : <http://www.mariolukas.de/2012/05/repstrap-3d-drucker-aus-computerschrott-teil-1/> I replaced the DC",
"it affect the movement of the carriage or not at",
"enough space to fit the axis of the nema 17",
"the exact spot of the older DC motor axis, in",
"guy : <http://www.mariolukas.de/2012/05/repstrap-3d-drucker-aus-computerschrott-teil-1/> I replaced the DC motor in a",
"motor (NEMA17). But there was not enough space to fit",
"spot, will it affect the movement of the carriage or",
"in the exact same spot, will it affect the movement",
"in short, the axis are not in the same place.",
"place. The question is : if the axis is not",
"axis](https://i.stack.imgur.com/8A21q.png)](https://i.stack.imgur.com/8A21q.png) I supposed it would but i'm not sure since",
"paper printed parts, like this guy : <http://www.mariolukas.de/2012/05/repstrap-3d-drucker-aus-computerschrott-teil-1/> I replaced",
"same place. The question is : if the axis is",
"fit the axis of the nema 17 at the exact",
"of the nema 17 at the exact spot of the",
"axis is not in the exact same spot, will it",
"the exact same spot, will it affect the movement of",
"with a stepper motor (NEMA17). But there was not enough",
"printed parts, like this guy : <http://www.mariolukas.de/2012/05/repstrap-3d-drucker-aus-computerschrott-teil-1/> I replaced the",
"affect the movement of the carriage or not at all",
"motor in a paper printer carriage assembly with a stepper",
"carriage assembly with a stepper motor (NEMA17). But there was",
"the same place. The question is : if the axis",
"movement of the carriage or not at all ?[](https://i.stack.imgur.com/8A21q.png) I supposed it",
"not at all ?[](https://i.stack.imgur.com/8A21q.png) I",
"in a paper printer carriage assembly with a stepper motor",
"assembly with a stepper motor (NEMA17). But there was not",
"will it affect the movement of the carriage or not",
"the axis is not in the exact same spot, will",
"?[](https://i.stack.imgur.com/8A21q.png) I supposed it would",
"axis are not in the same place. The question is",
"not in the same place. The question is : if",
"space to fit the axis of the nema 17 at",
"i'm not sure since the carriage is limited in movement",
"or not at all ?[](https://i.stack.imgur.com/8A21q.png)",
"carriage is limited in movement by the rails and that",
"exact same spot, will it affect the movement of the",
"I replaced the DC motor in a paper printer carriage",
"at the exact spot of the older DC motor axis,",
"spot of the older DC motor axis, in short, the",
"stepper motor (NEMA17). But there was not enough space to",
"currently attempting to make a repstrap using paper printed parts,",
"supposed it would but i'm not sure since the carriage",
"repstrap using paper printed parts, like this guy : <http://www.mariolukas.de/2012/05/repstrap-3d-drucker-aus-computerschrott-teil-1/>",
"limited in movement by the rails and that we still",
"sure since the carriage is limited in movement by the",
"to fit the axis of the nema 17 at the",
"axis, in short, the axis are not in the same",
"older DC motor axis, in short, the axis are not",
"carriage or not at all ?[![new and old belt driven",
"the older DC motor axis, in short, the axis are",
"in movement by the rails and that we still move",
"(NEMA17). But there was not enough space to fit the",
": <http://www.mariolukas.de/2012/05/repstrap-3d-drucker-aus-computerschrott-teil-1/> I replaced the DC motor in a paper",
"it would but i'm not sure since the carriage is",
"the axis of the nema 17 at the exact spot",
"attempting to make a repstrap using paper printed parts, like",
"the carriage or not at all ?[![new and old belt",
"the movement of the carriage or not at all ?[![new",
"since the carriage is limited in movement by the rails",
"is not in the exact same spot, will it affect",
"there was not enough space to fit the axis of",
"a repstrap using paper printed parts, like this guy :",
"short, the axis are not in the same place. The",
"of the older DC motor axis, in short, the axis",
"the nema 17 at the exact spot of the older",
"like this guy : <http://www.mariolukas.de/2012/05/repstrap-3d-drucker-aus-computerschrott-teil-1/> I replaced the DC motor"
] |
[
"out and be used. I have no experience with 3D",
"to go around the barrel). I don't know what software",
"inside, and there should be a hole on the top",
"curved wood-colored sides with staves and holes to interlock and",
"with 3D modeling or printing, but I have access to",
"(ex. curved wood-colored sides with staves and holes to interlock",
"similar to [this wooden one on Amazon](http://rads.stackoverflow.com/amzn/click/B009K5DSJG). I want it",
"is to 3D print a 5 liter miniature barrel with",
"hoops to go around the barrel). I don't know what",
"to 3D print a 5 liter miniature barrel with a",
"and there should be a hole on the top as",
"but I have access to a public 3D printer at",
"what software to use, though. I was thinking of starting",
"thinking of starting to learn Blender? Would that be effective",
"it to have a removable top so that a boxed",
"the spigot may stick out and be used. I have",
"I know you can print parts individually (ex. curved wood-colored",
"make up the body of the barrel, the metal-colored hoops",
"know what software to use, though. I was thinking of",
"wooden one on Amazon](http://rads.stackoverflow.com/amzn/click/B009K5DSJG). I want it to have a",
"have no experience with 3D modeling or printing, but I",
"3D print a 5 liter miniature barrel with a side",
"have access to a public 3D printer at my local",
"you can print parts individually (ex. curved wood-colored sides with",
"a hole on the top as well so that the",
"I don't know what software to use, though. I was",
"may stick out and be used. I have no experience",
"a boxed wine bladder may be put inside, and there",
"boxed wine bladder may be put inside, and there should",
"[this wooden one on Amazon](http://rads.stackoverflow.com/amzn/click/B009K5DSJG). I want it to have",
"side stand, similar to [this wooden one on Amazon](http://rads.stackoverflow.com/amzn/click/B009K5DSJG). I",
"the barrel, the metal-colored hoops to go around the barrel).",
"use, though. I was thinking of starting to learn Blender?",
"so that the spigot may stick out and be used.",
"well so that the spigot may stick out and be",
"library. I know you can print parts individually (ex. curved",
"individually (ex. curved wood-colored sides with staves and holes to",
"barrel, the metal-colored hoops to go around the barrel). I",
"barrel). I don't know what software to use, though. I",
"software to use, though. I was thinking of starting to",
"modeling or printing, but I have access to a public",
"metal-colored hoops to go around the barrel). I don't know",
"interlock and make up the body of the barrel, the",
"5 liter miniature barrel with a side stand, similar to",
"and make up the body of the barrel, the metal-colored",
"bladder may be put inside, and there should be a",
"though. I was thinking of starting to learn Blender? Would",
"there should be a hole on the top as well",
"and holes to interlock and make up the body of",
"be put inside, and there should be a hole on",
"I have access to a public 3D printer at my",
"the body of the barrel, the metal-colored hoops to go",
"miniature barrel with a side stand, similar to [this wooden",
"top so that a boxed wine bladder may be put",
"print parts individually (ex. curved wood-colored sides with staves and",
"to use, though. I was thinking of starting to learn",
"barrel with a side stand, similar to [this wooden one",
"or printing, but I have access to a public 3D",
"a removable top so that a boxed wine bladder may",
"local library. I know you can print parts individually (ex.",
"on Amazon](http://rads.stackoverflow.com/amzn/click/B009K5DSJG). I want it to have a removable top",
"want it to have a removable top so that a",
"around the barrel). I don't know what software to use,",
"as well so that the spigot may stick out and",
"a side stand, similar to [this wooden one on Amazon](http://rads.stackoverflow.com/amzn/click/B009K5DSJG).",
"spigot may stick out and be used. I have no",
"up the body of the barrel, the metal-colored hoops to",
"stick out and be used. I have no experience with",
"print a 5 liter miniature barrel with a side stand,",
"a 5 liter miniature barrel with a side stand, similar",
"was thinking of starting to learn Blender? Would that be",
"of the barrel, the metal-colored hoops to go around the",
"staves and holes to interlock and make up the body",
"top as well so that the spigot may stick out",
"and be used. I have no experience with 3D modeling",
"know you can print parts individually (ex. curved wood-colored sides",
"go around the barrel). I don't know what software to",
"can print parts individually (ex. curved wood-colored sides with staves",
"holes to interlock and make up the body of the",
"with staves and holes to interlock and make up the",
"so that a boxed wine bladder may be put inside,",
"I have no experience with 3D modeling or printing, but",
"should be a hole on the top as well so",
"liter miniature barrel with a side stand, similar to [this",
"have a removable top so that a boxed wine bladder",
"on the top as well so that the spigot may",
"be used. I have no experience with 3D modeling or",
"goal is to 3D print a 5 liter miniature barrel",
"put inside, and there should be a hole on the",
"My goal is to 3D print a 5 liter miniature",
"at my local library. I know you can print parts",
"that the spigot may stick out and be used. I",
"body of the barrel, the metal-colored hoops to go around",
"to interlock and make up the body of the barrel,",
"sides with staves and holes to interlock and make up",
"one on Amazon](http://rads.stackoverflow.com/amzn/click/B009K5DSJG). I want it to have a removable",
"don't know what software to use, though. I was thinking",
"my local library. I know you can print parts individually",
"with a side stand, similar to [this wooden one on",
"starting to learn Blender? Would that be effective for this",
"Amazon](http://rads.stackoverflow.com/amzn/click/B009K5DSJG). I want it to have a removable top so",
"printing, but I have access to a public 3D printer",
"to have a removable top so that a boxed wine",
"printer at my local library. I know you can print",
"I want it to have a removable top so that",
"wine bladder may be put inside, and there should be",
"of starting to learn Blender? Would that be effective for",
"that a boxed wine bladder may be put inside, and",
"no experience with 3D modeling or printing, but I have",
"be a hole on the top as well so that",
"3D modeling or printing, but I have access to a",
"3D printer at my local library. I know you can",
"to learn Blender? Would that be effective for this project?",
"experience with 3D modeling or printing, but I have access",
"used. I have no experience with 3D modeling or printing,",
"a public 3D printer at my local library. I know",
"hole on the top as well so that the spigot",
"to a public 3D printer at my local library. I",
"to [this wooden one on Amazon](http://rads.stackoverflow.com/amzn/click/B009K5DSJG). I want it to",
"wood-colored sides with staves and holes to interlock and make",
"access to a public 3D printer at my local library.",
"may be put inside, and there should be a hole",
"removable top so that a boxed wine bladder may be",
"the metal-colored hoops to go around the barrel). I don't",
"I was thinking of starting to learn Blender? Would that",
"the barrel). I don't know what software to use, though.",
"the top as well so that the spigot may stick",
"parts individually (ex. curved wood-colored sides with staves and holes",
"stand, similar to [this wooden one on Amazon](http://rads.stackoverflow.com/amzn/click/B009K5DSJG). I want",
"public 3D printer at my local library. I know you"
] |
[
"want? (assuming all the same type, ABSm, PLA). I think",
"finding anything talking about Plastic mixing in an extruder. Why",
"know of is with Recycled plastic that uses multi color.",
"a Doimund hotend, or a hotend with 5+ inputs, and",
"Bending I know of is with Recycled plastic that uses",
"could not color bend, or mix 3d printing filaments. I",
"anything talking about Plastic mixing in an extruder. Why is",
"a gradient effect on prints. The best I have seen",
"plastic that uses multi color. Not quite what I am",
"in an extruder. Why is it that we cannot take",
"the least get a gradient effect on prints. The best",
"a powder / advanced / out of hobbyist price range",
"only Color Bending I know of is with Recycled plastic",
"is with Recycled plastic that uses multi color. Not quite",
"This came up in one of my groups today. That",
"I think it would be interesting to at the least",
"gradient effect on prints. The best I have seen is",
"is it that we cannot take say a Doimund hotend,",
"extruder. Why is it that we cannot take say a",
"one of my groups today. That we could not color",
"it would be interesting to at the least get a",
"say a Doimund hotend, or a hotend with 5+ inputs,",
"color bend, or mix 3d printing filaments. I have researched",
"uses multi color. Not quite what I am looking for.",
"and a marker system. Or a powder / advanced /",
"Plastic mixing in an extruder. Why is it that we",
"up in one of my groups today. That we could",
"ABSm, PLA). I think it would be interesting to at",
"that uses multi color. Not quite what I am looking",
"That we could not color bend, or mix 3d printing",
"seen is natural plastic and a marker system. Or a",
"The only Color Bending I know of is with Recycled",
"of is with Recycled plastic that uses multi color. Not",
"/ advanced / out of hobbyist price range process that",
"have researched but I am not finding anything talking about",
"in one of my groups today. That we could not",
"plastic and a marker system. Or a powder / advanced",
"at the least get a gradient effect on prints. The",
"or mix 3d printing filaments. I have researched but I",
"(assuming all the same type, ABSm, PLA). I think it",
"be interesting to at the least get a gradient effect",
"ink. The only Color Bending I know of is with",
"effect on prints. The best I have seen is natural",
"/ out of hobbyist price range process that sprays ink.",
"hobbyist price range process that sprays ink. The only Color",
"an extruder. Why is it that we cannot take say",
"we cannot take say a Doimund hotend, or a hotend",
"Recycled plastic that uses multi color. Not quite what I",
"not finding anything talking about Plastic mixing in an extruder.",
"mixing in an extruder. Why is it that we cannot",
"get a gradient effect on prints. The best I have",
"to at the least get a gradient effect on prints.",
"inputs, and mix any color we want? (assuming all the",
"filaments. I have researched but I am not finding anything",
"the same type, ABSm, PLA). I think it would be",
"today. That we could not color bend, or mix 3d",
"researched but I am not finding anything talking about Plastic",
"would be interesting to at the least get a gradient",
"is natural plastic and a marker system. Or a powder",
"sprays ink. The only Color Bending I know of is",
"type, ABSm, PLA). I think it would be interesting to",
"cannot take say a Doimund hotend, or a hotend with",
"that sprays ink. The only Color Bending I know of",
"Color Bending I know of is with Recycled plastic that",
"powder / advanced / out of hobbyist price range process",
"we want? (assuming all the same type, ABSm, PLA). I",
"The best I have seen is natural plastic and a",
"same type, ABSm, PLA). I think it would be interesting",
"3d printing filaments. I have researched but I am not",
"printing filaments. I have researched but I am not finding",
"think it would be interesting to at the least get",
"prints. The best I have seen is natural plastic and",
"all the same type, ABSm, PLA). I think it would",
"with 5+ inputs, and mix any color we want? (assuming",
"not color bend, or mix 3d printing filaments. I have",
"Or a powder / advanced / out of hobbyist price",
"best I have seen is natural plastic and a marker",
"hotend with 5+ inputs, and mix any color we want?",
"take say a Doimund hotend, or a hotend with 5+",
"we could not color bend, or mix 3d printing filaments.",
"am not finding anything talking about Plastic mixing in an",
"or a hotend with 5+ inputs, and mix any color",
"range process that sprays ink. The only Color Bending I",
"system. Or a powder / advanced / out of hobbyist",
"a marker system. Or a powder / advanced / out",
"multi color. Not quite what I am looking for. Thanks!",
"and mix any color we want? (assuming all the same",
"out of hobbyist price range process that sprays ink. The",
"mix 3d printing filaments. I have researched but I am",
"of my groups today. That we could not color bend,",
"I have researched but I am not finding anything talking",
"process that sprays ink. The only Color Bending I know",
"that we cannot take say a Doimund hotend, or a",
"bend, or mix 3d printing filaments. I have researched but",
"a hotend with 5+ inputs, and mix any color we",
"but I am not finding anything talking about Plastic mixing",
"hotend, or a hotend with 5+ inputs, and mix any",
"I have seen is natural plastic and a marker system.",
"I know of is with Recycled plastic that uses multi",
"price range process that sprays ink. The only Color Bending",
"marker system. Or a powder / advanced / out of",
"color we want? (assuming all the same type, ABSm, PLA).",
"it that we cannot take say a Doimund hotend, or",
"least get a gradient effect on prints. The best I",
"advanced / out of hobbyist price range process that sprays",
"talking about Plastic mixing in an extruder. Why is it",
"mix any color we want? (assuming all the same type,",
"have seen is natural plastic and a marker system. Or",
"I am not finding anything talking about Plastic mixing in",
"interesting to at the least get a gradient effect on",
"about Plastic mixing in an extruder. Why is it that",
"of hobbyist price range process that sprays ink. The only",
"groups today. That we could not color bend, or mix",
"natural plastic and a marker system. Or a powder /",
"came up in one of my groups today. That we",
"my groups today. That we could not color bend, or",
"Doimund hotend, or a hotend with 5+ inputs, and mix",
"PLA). I think it would be interesting to at the",
"with Recycled plastic that uses multi color. Not quite what",
"Why is it that we cannot take say a Doimund",
"5+ inputs, and mix any color we want? (assuming all",
"on prints. The best I have seen is natural plastic",
"any color we want? (assuming all the same type, ABSm,"
] |
[
"other way unsuitable for this. Will this be a disaster,",
"a three armed part, with small wheels at the end",
"has broken. It is a three armed part, with small",
"part, with small wheels at the end of each arm.",
"arm. [](https://i.stack.imgur.com/qza6i.jpg) I'm confident I could print a replacement,",
"this be a disaster, or should I give it a",
"any other way unsuitable for this. Will this be a",
"I could print a replacement, and reuse the existing wheels",
"find any clear information online about whether PLA absorbs microwaves,",
"reuse the existing wheels (since they can be removed). The",
"concerned that it might get heated up by the microwave",
"each arm. [](https://i.stack.imgur.com/qza6i.jpg) I'm confident I could print a",
"to conduct through to the PLA, but I'm concerned that",
"I'm confident I could print a replacement, and reuse the",
"to the PLA, but I'm concerned that it might get",
"conduct through to the PLA, but I'm concerned that it",
"three armed part, with small wheels at the end of",
"wheels (since they can be removed). The heat of the",
"if it is in any other way unsuitable for this.",
"PLA, but I'm concerned that it might get heated up",
"can be removed). The heat of the food would be",
"microwaves, or if it is in any other way unsuitable",
"confident I could print a replacement, and reuse the existing",
"for this. Will this be a disaster, or should I",
"with small wheels at the end of each arm. [](https://i.stack.imgur.com/qza6i.jpg)",
"wheels at the end of each arm. [](https://i.stack.imgur.com/qza6i.jpg) I'm",
"be unlikely to conduct through to the PLA, but I'm",
"up by the microwave radiation. I can't find any clear",
"at the end of each arm. [](https://i.stack.imgur.com/qza6i.jpg) I'm confident",
"or if it is in any other way unsuitable for",
"in my microwave has broken. It is a three armed",
"end of each arm. [](https://i.stack.imgur.com/qza6i.jpg) I'm confident I could",
"part](https://i.stack.imgur.com/qza6i.jpg)](https://i.stack.imgur.com/qza6i.jpg) I'm confident I could print a replacement, and reuse",
"they can be removed). The heat of the food would",
"unsuitable for this. Will this be a disaster, or should",
"and reuse the existing wheels (since they can be removed).",
"The heat of the food would be unlikely to conduct",
"about whether PLA absorbs microwaves, or if it is in",
"might get heated up by the microwave radiation. I can't",
"my microwave has broken. It is a three armed part,",
"PLA absorbs microwaves, or if it is in any other",
"microwave radiation. I can't find any clear information online about",
"the end of each arm. [](https://i.stack.imgur.com/qza6i.jpg) I'm confident I",
"would be unlikely to conduct through to the PLA, but",
"the existing wheels (since they can be removed). The heat",
"absorbs microwaves, or if it is in any other way",
"get heated up by the microwave radiation. I can't find",
"armed part, with small wheels at the end of each",
"I'm concerned that it might get heated up by the",
"microwave has broken. It is a three armed part, with",
"clear information online about whether PLA absorbs microwaves, or if",
"information online about whether PLA absorbs microwaves, or if it",
"of each arm. [](https://i.stack.imgur.com/qza6i.jpg) I'm confident I could print",
"is a three armed part, with small wheels at the",
"replacement, and reuse the existing wheels (since they can be",
"the PLA, but I'm concerned that it might get heated",
"be a disaster, or should I give it a go?",
"radiation. I can't find any clear information online about whether",
"in any other way unsuitable for this. Will this be",
"any clear information online about whether PLA absorbs microwaves, or",
"whether PLA absorbs microwaves, or if it is in any",
"through to the PLA, but I'm concerned that it might",
"part in my microwave has broken. It is a three",
"this. Will this be a disaster, or should I give",
"is in any other way unsuitable for this. Will this",
"support part in my microwave has broken. It is a",
"way unsuitable for this. Will this be a disaster, or",
"be removed). The heat of the food would be unlikely",
"The turntable support part in my microwave has broken. It",
"online about whether PLA absorbs microwaves, or if it is",
"by the microwave radiation. I can't find any clear information",
"[](https://i.stack.imgur.com/qza6i.jpg) I'm confident I could print a replacement, and",
"unlikely to conduct through to the PLA, but I'm concerned",
"broken. It is a three armed part, with small wheels",
"a replacement, and reuse the existing wheels (since they can",
"print a replacement, and reuse the existing wheels (since they",
"heat of the food would be unlikely to conduct through",
"I can't find any clear information online about whether PLA",
"could print a replacement, and reuse the existing wheels (since",
"it is in any other way unsuitable for this. Will",
"existing wheels (since they can be removed). The heat of",
"the food would be unlikely to conduct through to the",
"Will this be a disaster, or should I give it",
"turntable support part in my microwave has broken. It is",
"of the food would be unlikely to conduct through to",
"but I'm concerned that it might get heated up by",
"the microwave radiation. I can't find any clear information online",
"can't find any clear information online about whether PLA absorbs",
"food would be unlikely to conduct through to the PLA,",
"It is a three armed part, with small wheels at",
"removed). The heat of the food would be unlikely to",
"that it might get heated up by the microwave radiation.",
"it might get heated up by the microwave radiation. I",
"heated up by the microwave radiation. I can't find any",
"(since they can be removed). The heat of the food"
] |
[
"thinking about designing things such as small bedside tables, game/dvd/bluray",
"design what I want and give it reasonable infill, walls",
"thought that making them modular would be a good way",
"thought about and evaluated to some extent, but I'm not",
"help to create an end result that is vastly larger",
"I decide to go ahead with these ideas I have",
"who has designed anything to be modularly printed. Have you",
"well since I feel as though proper engineering techniques alongside",
"infill, walls and whatnot, and just go for a trial",
"well. Modular design would help to create an end result",
"and whatnot, and just go for a trial and error",
"still going to follow JKEngineer's advise and check out that",
"want and give it reasonable infill, walls and whatnot, and",
"just design what I want and give it reasonable infill,",
"am I simply overthinking this? Should I just design what",
"would tackle the problem (as outlined in darth pixel's answer)",
"and give it reasonable infill, walls and whatnot, and just",
"whatnot, and just go for a trial and error approach?",
"stuff? --- EDIT: Although I've marked darth pixel's answer as",
"designing things such as small bedside tables, game/dvd/bluray racks for",
"have been thinking about designing things such as small bedside",
"modular would be a good way to go about doing",
"small bedside tables, game/dvd/bluray racks for 3d printing. I've always",
"these ideas I have floating around in my head. I'm",
"pixel's answer as accepted, I'm still going to follow JKEngineer's",
"doing this as well. Modular design would help to create",
"to think about if I decide to go ahead with",
"as well since I feel as though proper engineering techniques",
"good mentality towards how I would tackle the problem (as",
"of the print? Or am I simply overthinking this? Should",
"but is a concrete understanding of this type of engineering",
"would be a good way to go about doing this",
"when it comes to this sort of stuff? --- EDIT:",
"techniques alongside a good mentality towards how I would tackle",
"proper engineering techniques alongside a good mentality towards how I",
"of plastic due to shrinkage, and print settings (% infill,",
"pixel's answer) would prove to yield better results in the",
"give it reasonable infill, walls and whatnot, and just go",
"think carefully about the engineering side of the print? Or",
"as well. Modular design would help to create an end",
"for use in other projects. However, I'm not sure of",
"what I want and give it reasonable infill, walls and",
"book as well since I feel as though proper engineering",
"I'm not sure about what else I might be missing.",
"to this sort of stuff? --- EDIT: Although I've marked",
"decide to go ahead with these ideas I have floating",
"of stuff? --- EDIT: Although I've marked darth pixel's answer",
"able to recycle models for use in other projects. However,",
"to go ahead with these ideas I have floating around",
"and check out that book as well since I feel",
"that certain joints (dovetail, etc), tolerances for different types of",
"this? Should I just design what I want and give",
"engineering techniques alongside a good mentality towards how I would",
"--- EDIT: Although I've marked darth pixel's answer as accepted,",
"tackle the problem (as outlined in darth pixel's answer) would",
"simply overthinking this? Should I just design what I want",
"answer as accepted, I'm still going to follow JKEngineer's advise",
"to this madness, but is a concrete understanding of this",
"Have you really had to think carefully about the engineering",
"might even be able to recycle models for use in",
"recycle models for use in other projects. However, I'm not",
"think about if I decide to go ahead with these",
"(dovetail, etc), tolerances for different types of plastic due to",
"settings (% infill, in particular) would be important to have",
"a concrete understanding of this type of engineering absolutely paramount",
"for 3d printing. I've always thought that making them modular",
"my head. I'm assuming that certain joints (dovetail, etc), tolerances",
"and error approach? I'm sure there is a method to",
"I feel as though proper engineering techniques alongside a good",
"(% infill, in particular) would be important to have thought",
"the engineering side of the print? Or am I simply",
"this sort of stuff? --- EDIT: Although I've marked darth",
"of my 3d printer. I might even be able to",
"reasonable infill, walls and whatnot, and just go for a",
"side of the print? Or am I simply overthinking this?",
"print settings (% infill, in particular) would be important to",
"to follow JKEngineer's advise and check out that book as",
"out that book as well since I feel as though",
"to have thought about and evaluated to some extent, but",
"check out that book as well since I feel as",
"making them modular would be a good way to go",
"create an end result that is vastly larger than the",
"else I might be missing. So my question is to",
"advise and check out that book as well since I",
"mentality towards how I would tackle the problem (as outlined",
"different types of plastic due to shrinkage, and print settings",
"shrinkage, and print settings (% infill, in particular) would be",
"problem (as outlined in darth pixel's answer) would prove to",
"tolerances for different types of plastic due to shrinkage, and",
"tables, game/dvd/bluray racks for 3d printing. I've always thought that",
"be able to recycle models for use in other projects.",
"3d printing. I've always thought that making them modular would",
"missing. So my question is to anyone who has designed",
"comes to this sort of stuff? --- EDIT: Although I've",
"printed. Have you really had to think carefully about the",
"this madness, but is a concrete understanding of this type",
"than the print volume of my 3d printer. I might",
"understanding of this type of engineering absolutely paramount when it",
"I've marked darth pixel's answer as accepted, I'm still going",
"is to anyone who has designed anything to be modularly",
"a good mentality towards how I would tackle the problem",
"a good way to go about doing this as well.",
"Modular design would help to create an end result that",
"darth pixel's answer) would prove to yield better results in",
"be modularly printed. Have you really had to think carefully",
"follow JKEngineer's advise and check out that book as well",
"to recycle models for use in other projects. However, I'm",
"a method to this madness, but is a concrete understanding",
"way to go about doing this as well. Modular design",
"in particular) would be important to have thought about and",
"outlined in darth pixel's answer) would prove to yield better",
"infill, in particular) would be important to have thought about",
"design would help to create an end result that is",
"particular) would be important to have thought about and evaluated",
"sure there is a method to this madness, but is",
"this type of engineering absolutely paramount when it comes to",
"Although I've marked darth pixel's answer as accepted, I'm still",
"about what else I might be missing. So my question",
"there is a method to this madness, but is a",
"would help to create an end result that is vastly",
"always thought that making them modular would be a good",
"is a method to this madness, but is a concrete",
"about and evaluated to some extent, but I'm not sure",
"what else I might be missing. So my question is",
"some extent, but I'm not sure about what else I",
"about designing things such as small bedside tables, game/dvd/bluray racks",
"in darth pixel's answer) would prove to yield better results",
"I'm still going to follow JKEngineer's advise and check out",
"my question is to anyone who has designed anything to",
"an end result that is vastly larger than the print",
"I would tackle the problem (as outlined in darth pixel's",
"result that is vastly larger than the print volume of",
"of what I need to think about if I decide",
"I might even be able to recycle models for use",
"need to think about if I decide to go ahead",
"good way to go about doing this as well. Modular",
"ahead with these ideas I have floating around in my",
"I want and give it reasonable infill, walls and whatnot,",
"alongside a good mentality towards how I would tackle the",
"important to have thought about and evaluated to some extent,",
"has designed anything to be modularly printed. Have you really",
"really had to think carefully about the engineering side of",
"been thinking about designing things such as small bedside tables,",
"head. I'm assuming that certain joints (dovetail, etc), tolerances for",
"to some extent, but I'm not sure about what else",
"things such as small bedside tables, game/dvd/bluray racks for 3d",
"to shrinkage, and print settings (% infill, in particular) would",
"However, I'm not sure of what I need to think",
"go ahead with these ideas I have floating around in",
"types of plastic due to shrinkage, and print settings (%",
"my 3d printer. I might even be able to recycle",
"models for use in other projects. However, I'm not sure",
"while now, I have been thinking about designing things such",
"and evaluated to some extent, but I'm not sure about",
"you really had to think carefully about the engineering side",
"overthinking this? Should I just design what I want and",
"For a while now, I have been thinking about designing",
"just go for a trial and error approach? I'm sure",
"vastly larger than the print volume of my 3d printer.",
"floating around in my head. I'm assuming that certain joints",
"for different types of plastic due to shrinkage, and print",
"I simply overthinking this? Should I just design what I",
"for a trial and error approach? I'm sure there is",
"what I need to think about if I decide to",
"with these ideas I have floating around in my head.",
"certain joints (dovetail, etc), tolerances for different types of plastic",
"(as outlined in darth pixel's answer) would prove to yield",
"larger than the print volume of my 3d printer. I",
"racks for 3d printing. I've always thought that making them",
"to go about doing this as well. Modular design would",
"bedside tables, game/dvd/bluray racks for 3d printing. I've always thought",
"projects. However, I'm not sure of what I need to",
"around in my head. I'm assuming that certain joints (dovetail,",
"if I decide to go ahead with these ideas I",
"to be modularly printed. Have you really had to think",
"the problem (as outlined in darth pixel's answer) would prove",
"be missing. So my question is to anyone who has",
"I just design what I want and give it reasonable",
"method to this madness, but is a concrete understanding of",
"anything to be modularly printed. Have you really had to",
"feel as though proper engineering techniques alongside a good mentality",
"end result that is vastly larger than the print volume",
"use in other projects. However, I'm not sure of what",
"the print volume of my 3d printer. I might even",
"concrete understanding of this type of engineering absolutely paramount when",
"I'm not sure of what I need to think about",
"error approach? I'm sure there is a method to this",
"designed anything to be modularly printed. Have you really had",
"paramount when it comes to this sort of stuff? ---",
"such as small bedside tables, game/dvd/bluray racks for 3d printing.",
"would prove to yield better results in the long run.",
"a trial and error approach? I'm sure there is a",
"have floating around in my head. I'm assuming that certain",
"absolutely paramount when it comes to this sort of stuff?",
"about doing this as well. Modular design would help to",
"going to follow JKEngineer's advise and check out that book",
"since I feel as though proper engineering techniques alongside a",
"answer) would prove to yield better results in the long",
"I'm assuming that certain joints (dovetail, etc), tolerances for different",
"to think carefully about the engineering side of the print?",
"I need to think about if I decide to go",
"sure of what I need to think about if I",
"I have floating around in my head. I'm assuming that",
"darth pixel's answer as accepted, I'm still going to follow",
"type of engineering absolutely paramount when it comes to this",
"approach? I'm sure there is a method to this madness,",
"how I would tackle the problem (as outlined in darth",
"3d printer. I might even be able to recycle models",
"I might be missing. So my question is to anyone",
"print? Or am I simply overthinking this? Should I just",
"Should I just design what I want and give it",
"is a concrete understanding of this type of engineering absolutely",
"carefully about the engineering side of the print? Or am",
"printer. I might even be able to recycle models for",
"due to shrinkage, and print settings (% infill, in particular)",
"ideas I have floating around in my head. I'm assuming",
"extent, but I'm not sure about what else I might",
"madness, but is a concrete understanding of this type of",
"not sure of what I need to think about if",
"walls and whatnot, and just go for a trial and",
"that is vastly larger than the print volume of my",
"sure about what else I might be missing. So my",
"game/dvd/bluray racks for 3d printing. I've always thought that making",
"it reasonable infill, walls and whatnot, and just go for",
"would be important to have thought about and evaluated to",
"assuming that certain joints (dovetail, etc), tolerances for different types",
"in my head. I'm assuming that certain joints (dovetail, etc),",
"this as well. Modular design would help to create an",
"trial and error approach? I'm sure there is a method",
"have thought about and evaluated to some extent, but I'm",
"So my question is to anyone who has designed anything",
"is vastly larger than the print volume of my 3d",
"might be missing. So my question is to anyone who",
"them modular would be a good way to go about",
"had to think carefully about the engineering side of the",
"in other projects. However, I'm not sure of what I",
"about the engineering side of the print? Or am I",
"as though proper engineering techniques alongside a good mentality towards",
"other projects. However, I'm not sure of what I need",
"engineering side of the print? Or am I simply overthinking",
"as small bedside tables, game/dvd/bluray racks for 3d printing. I've",
"as accepted, I'm still going to follow JKEngineer's advise and",
"engineering absolutely paramount when it comes to this sort of",
"EDIT: Although I've marked darth pixel's answer as accepted, I'm",
"be important to have thought about and evaluated to some",
"Or am I simply overthinking this? Should I just design",
"be a good way to go about doing this as",
"but I'm not sure about what else I might be",
"evaluated to some extent, but I'm not sure about what",
"printing. I've always thought that making them modular would be",
"not sure about what else I might be missing. So",
"anyone who has designed anything to be modularly printed. Have",
"that making them modular would be a good way to",
"marked darth pixel's answer as accepted, I'm still going to",
"I'm sure there is a method to this madness, but",
"sort of stuff? --- EDIT: Although I've marked darth pixel's",
"I've always thought that making them modular would be a",
"modularly printed. Have you really had to think carefully about",
"I have been thinking about designing things such as small",
"a while now, I have been thinking about designing things",
"print volume of my 3d printer. I might even be",
"and print settings (% infill, in particular) would be important",
"though proper engineering techniques alongside a good mentality towards how",
"go about doing this as well. Modular design would help",
"to create an end result that is vastly larger than",
"etc), tolerances for different types of plastic due to shrinkage,",
"even be able to recycle models for use in other",
"plastic due to shrinkage, and print settings (% infill, in",
"towards how I would tackle the problem (as outlined in",
"the print? Or am I simply overthinking this? Should I",
"go for a trial and error approach? I'm sure there",
"it comes to this sort of stuff? --- EDIT: Although",
"now, I have been thinking about designing things such as",
"about if I decide to go ahead with these ideas",
"that book as well since I feel as though proper",
"of engineering absolutely paramount when it comes to this sort",
"accepted, I'm still going to follow JKEngineer's advise and check",
"joints (dovetail, etc), tolerances for different types of plastic due",
"JKEngineer's advise and check out that book as well since",
"and just go for a trial and error approach? I'm",
"volume of my 3d printer. I might even be able",
"question is to anyone who has designed anything to be",
"to anyone who has designed anything to be modularly printed.",
"of this type of engineering absolutely paramount when it comes"
] |
[
"window of a car, but I couldn't find it anywhere.",
"those numbers are correct). I found a perfect piece of",
"numbers are correct). I found a perfect piece of glass",
"My problem now is how to heat the glass? I",
"use as my print bed. My problem now is how",
"have printed a MPCNC machine. It has a print area",
"print area of about 30\" x 30\" and up to",
"up to 11\" tall. (yes, those numbers are correct). I",
"machine. It has a print area of about 30\" x",
"11\" tall. (yes, those numbers are correct). I found a",
"a garage sale for $5.00 to use as my print",
"problem now is how to heat the glass? I was",
"to use as my print bed. My problem now is",
"it anywhere. Any ideas or links to something that can",
"about 30\" x 30\" and up to 11\" tall. (yes,",
"to 11\" tall. (yes, those numbers are correct). I found",
"was wondering if there is some sort of tape that",
"on the rear window of a car, but I couldn't",
"x 30\" and up to 11\" tall. (yes, those numbers",
"bed. My problem now is how to heat the glass?",
"find it anywhere. Any ideas or links to something that",
"of glass at a garage sale for $5.00 to use",
"some sort of tape that would perhaps mimic what is",
"at a garage sale for $5.00 to use as my",
"of a car, but I couldn't find it anywhere. Any",
"is some sort of tape that would perhaps mimic what",
"my print bed. My problem now is how to heat",
"for $5.00 to use as my print bed. My problem",
"of tape that would perhaps mimic what is on the",
"can get me some progress on my search would be",
"garage sale for $5.00 to use as my print bed.",
"anywhere. Any ideas or links to something that can get",
"get me some progress on my search would be greatly",
"correct). I found a perfect piece of glass at a",
"a print area of about 30\" x 30\" and up",
"is how to heat the glass? I was wondering if",
"I found a perfect piece of glass at a garage",
"mimic what is on the rear window of a car,",
"wondering if there is some sort of tape that would",
"perhaps mimic what is on the rear window of a",
"links to something that can get me some progress on",
"printed a MPCNC machine. It has a print area of",
"if there is some sort of tape that would perhaps",
"would perhaps mimic what is on the rear window of",
"ideas or links to something that can get me some",
"sort of tape that would perhaps mimic what is on",
"but I couldn't find it anywhere. Any ideas or links",
"me some progress on my search would be greatly appreciated.",
"to something that can get me some progress on my",
"rear window of a car, but I couldn't find it",
"what is on the rear window of a car, but",
"perfect piece of glass at a garage sale for $5.00",
"a MPCNC machine. It has a print area of about",
"piece of glass at a garage sale for $5.00 to",
"to heat the glass? I was wondering if there is",
"the rear window of a car, but I couldn't find",
"or links to something that can get me some progress",
"has a print area of about 30\" x 30\" and",
"of about 30\" x 30\" and up to 11\" tall.",
"print bed. My problem now is how to heat the",
"I was wondering if there is some sort of tape",
"Any ideas or links to something that can get me",
"area of about 30\" x 30\" and up to 11\"",
"that can get me some progress on my search would",
"there is some sort of tape that would perhaps mimic",
"It has a print area of about 30\" x 30\"",
"the glass? I was wondering if there is some sort",
"MPCNC machine. It has a print area of about 30\"",
"that would perhaps mimic what is on the rear window",
"how to heat the glass? I was wondering if there",
"$5.00 to use as my print bed. My problem now",
"a perfect piece of glass at a garage sale for",
"I couldn't find it anywhere. Any ideas or links to",
"heat the glass? I was wondering if there is some",
"found a perfect piece of glass at a garage sale",
"I have printed a MPCNC machine. It has a print",
"a car, but I couldn't find it anywhere. Any ideas",
"is on the rear window of a car, but I",
"something that can get me some progress on my search",
"are correct). I found a perfect piece of glass at",
"glass at a garage sale for $5.00 to use as",
"tall. (yes, those numbers are correct). I found a perfect",
"sale for $5.00 to use as my print bed. My",
"as my print bed. My problem now is how to",
"car, but I couldn't find it anywhere. Any ideas or",
"couldn't find it anywhere. Any ideas or links to something",
"glass? I was wondering if there is some sort of",
"now is how to heat the glass? I was wondering",
"30\" x 30\" and up to 11\" tall. (yes, those",
"and up to 11\" tall. (yes, those numbers are correct).",
"tape that would perhaps mimic what is on the rear",
"30\" and up to 11\" tall. (yes, those numbers are",
"(yes, those numbers are correct). I found a perfect piece"
] |
[
"getting some Z value with `M114`. Then I run the",
"for the bed is greater**! If I repeat the process",
"the bed is greater**! If I repeat the process I",
"am going through calibration. I can home carriages and find",
"Z values near bed after subsequent runs of five passes",
"five passes of `G1 X100 G1 X10` ``` 100% speed:",
"some Z value with `M114`. Then I run the effector",
"full height **up and then down** - and now **Z",
"and find the bed with paper-test getting some Z value",
"different moving in different directions. How can I fix that?",
"moving in different directions. How can I fix that? I",
"firmware. UPDATE: Z values near bed after subsequent runs of",
"can home carriages and find the bed with paper-test getting",
"`M114`. Then I run the effector almost full height **up",
"If I repeat the process I get greater and greater",
"0.1 0.4 0.9 1.4 4.6 6.6 300% speed: 0.0 0.7",
"travel per step is different moving in different directions. How",
"It seems that travel per step is different moving in",
"in paper-test. It seems that travel per step is different",
"using RAMPS 1.4 with Marlin firmware. UPDATE: Z values near",
"20% speed: 0.1 0.4 0.9 1.4 4.6 6.6 300% speed:",
"the process I get greater and greater values in paper-test.",
"I get greater and greater values in paper-test. It seems",
"paper-test getting some Z value with `M114`. Then I run",
"then down** - and now **Z value for the bed",
"the bed with paper-test getting some Z value with `M114`.",
"a Mini Kossel and I am going through calibration. I",
"100% speed: 0.1 0.3 0.5 0.7 1.0 20% speed: 0.1",
"that? I am using RAMPS 1.4 with Marlin firmware. UPDATE:",
"of five passes of `G1 X100 G1 X10` ``` 100%",
"of `G1 X100 G1 X10` ``` 100% speed: 0.1 0.3",
"home carriages and find the bed with paper-test getting some",
"0.7 1.0 20% speed: 0.1 0.4 0.9 1.4 4.6 6.6",
"paper-test. It seems that travel per step is different moving",
"process I get greater and greater values in paper-test. It",
"with paper-test getting some Z value with `M114`. Then I",
"X10` ``` 100% speed: 0.1 0.3 0.5 0.7 1.0 20%",
"I can home carriages and find the bed with paper-test",
"RAMPS 1.4 with Marlin firmware. UPDATE: Z values near bed",
"greater and greater values in paper-test. It seems that travel",
"carriages and find the bed with paper-test getting some Z",
"``` 100% speed: 0.1 0.3 0.5 0.7 1.0 20% speed:",
"I repeat the process I get greater and greater values",
"I am going through calibration. I can home carriages and",
"seems that travel per step is different moving in different",
"and then down** - and now **Z value for the",
"step is different moving in different directions. How can I",
"greater values in paper-test. It seems that travel per step",
"now **Z value for the bed is greater**! If I",
"subsequent runs of five passes of `G1 X100 G1 X10`",
"**up and then down** - and now **Z value for",
"G1 X10` ``` 100% speed: 0.1 0.3 0.5 0.7 1.0",
"height **up and then down** - and now **Z value",
"down** - and now **Z value for the bed is",
"per step is different moving in different directions. How can",
"greater**! If I repeat the process I get greater and",
"different directions. How can I fix that? I am using",
"Then I run the effector almost full height **up and",
"is different moving in different directions. How can I fix",
"0.4 0.9 1.4 4.6 6.6 300% speed: 0.0 0.7 1.0",
"find the bed with paper-test getting some Z value with",
"effector almost full height **up and then down** - and",
"the effector almost full height **up and then down** -",
"bed with paper-test getting some Z value with `M114`. Then",
"that travel per step is different moving in different directions.",
"runs of five passes of `G1 X100 G1 X10` ```",
"speed: 0.1 0.3 0.5 0.7 1.0 20% speed: 0.1 0.4",
"`G1 X100 G1 X10` ``` 100% speed: 0.1 0.3 0.5",
"and now **Z value for the bed is greater**! If",
"values in paper-test. It seems that travel per step is",
"near bed after subsequent runs of five passes of `G1",
"value for the bed is greater**! If I repeat the",
"am using RAMPS 1.4 with Marlin firmware. UPDATE: Z values",
"calibration. I can home carriages and find the bed with",
"I run the effector almost full height **up and then",
"fix that? I am using RAMPS 1.4 with Marlin firmware.",
"almost full height **up and then down** - and now",
"is greater**! If I repeat the process I get greater",
"values near bed after subsequent runs of five passes of",
"with Marlin firmware. UPDATE: Z values near bed after subsequent",
"get greater and greater values in paper-test. It seems that",
"- and now **Z value for the bed is greater**!",
"Mini Kossel and I am going through calibration. I can",
"bed after subsequent runs of five passes of `G1 X100",
"1.4 with Marlin firmware. UPDATE: Z values near bed after",
"1.4 4.6 6.6 300% speed: 0.0 0.7 1.0 1.3 ```",
"have a Mini Kossel and I am going through calibration.",
"0.5 0.7 1.0 20% speed: 0.1 0.4 0.9 1.4 4.6",
"Z value with `M114`. Then I run the effector almost",
"run the effector almost full height **up and then down**",
"going through calibration. I can home carriages and find the",
"0.9 1.4 4.6 6.6 300% speed: 0.0 0.7 1.0 1.3",
"value with `M114`. Then I run the effector almost full",
"passes of `G1 X100 G1 X10` ``` 100% speed: 0.1",
"with `M114`. Then I run the effector almost full height",
"directions. How can I fix that? I am using RAMPS",
"I have a Mini Kossel and I am going through",
"X100 G1 X10` ``` 100% speed: 0.1 0.3 0.5 0.7",
"can I fix that? I am using RAMPS 1.4 with",
"**Z value for the bed is greater**! If I repeat",
"and greater values in paper-test. It seems that travel per",
"repeat the process I get greater and greater values in",
"I fix that? I am using RAMPS 1.4 with Marlin",
"UPDATE: Z values near bed after subsequent runs of five",
"bed is greater**! If I repeat the process I get",
"0.1 0.3 0.5 0.7 1.0 20% speed: 0.1 0.4 0.9",
"Kossel and I am going through calibration. I can home",
"after subsequent runs of five passes of `G1 X100 G1",
"1.0 20% speed: 0.1 0.4 0.9 1.4 4.6 6.6 300%",
"and I am going through calibration. I can home carriages",
"speed: 0.1 0.4 0.9 1.4 4.6 6.6 300% speed: 0.0",
"0.3 0.5 0.7 1.0 20% speed: 0.1 0.4 0.9 1.4",
"Marlin firmware. UPDATE: Z values near bed after subsequent runs",
"through calibration. I can home carriages and find the bed",
"I am using RAMPS 1.4 with Marlin firmware. UPDATE: Z",
"How can I fix that? I am using RAMPS 1.4",
"in different directions. How can I fix that? I am"
] |
[
"looking for a 3D printer for applications in the dental",
"finish are the main requirements that we consider necessary. Any",
"(not for itra-oral use parts). Resolution and finish are the",
"parts). Resolution and finish are the main requirements that we",
"the dental field, for printing digital dental models (not for",
"applications in the dental field, for printing digital dental models",
"digital dental models (not for itra-oral use parts). Resolution and",
"field, for printing digital dental models (not for itra-oral use",
"for printing digital dental models (not for itra-oral use parts).",
"dental models (not for itra-oral use parts). Resolution and finish",
"for a 3D printer for applications in the dental field,",
"use parts). Resolution and finish are the main requirements that",
"models (not for itra-oral use parts). Resolution and finish are",
"for itra-oral use parts). Resolution and finish are the main",
"Resolution and finish are the main requirements that we consider",
"for applications in the dental field, for printing digital dental",
"are the main requirements that we consider necessary. Any suggestion?",
"and finish are the main requirements that we consider necessary.",
"I'm looking for a 3D printer for applications in the",
"in the dental field, for printing digital dental models (not",
"3D printer for applications in the dental field, for printing",
"printer for applications in the dental field, for printing digital",
"dental field, for printing digital dental models (not for itra-oral",
"itra-oral use parts). Resolution and finish are the main requirements",
"printing digital dental models (not for itra-oral use parts). Resolution",
"a 3D printer for applications in the dental field, for"
] |
[
"to using plain blue tape instead of Kapton, but it's",
"tape instead of Kapton, but it's still sticking too well",
"off at the end. I went back to using plain",
"on the glass and print. Works great. Large pieces come",
"I tried to pry it off by pushing a knife",
"can I do? How to prevent warping, while also making",
"Z calibration was lost (and I didn't know the calibration",
"a heated bed add-on. I'm using it exclusively with PLA.",
"next to impossible to tear it off at the end.",
"by pushing a knife under the piece, but that has",
"impossible to tear it off at the end. I went",
"with large flat surfaces that are siting flush with the",
"in the corners and around the edge, when the piece",
"and bed) and that made it perfect. No warping anymore.",
"out and put it back in, and the Z calibration",
"Z axis calibration (the fine adjustment for the initial distance",
"underneath? --- **EDIT:** The accepted answer was very good and",
"sure the piece does not stick too hard to whatever",
"and the Z calibration was lost (and I didn't know",
"now I have the opposite problem. When printing pieces with",
"pry it off by pushing a knife under the piece,",
"a result, I started having issues with the piece warping",
"down to 30 C or lower. I had some issues",
"to pry it off by pushing a knife under the",
"in, and the Z calibration was lost (and I didn't",
"(the fine adjustment for the initial distance between nozzle and",
"It worked great initially, but then I took the nozzle",
"I took the nozzle out and put it back in,",
"continue doing that. What can I do? How to prevent",
"and I don't want to mess with it by adding",
"didn't know the calibration was a thing). As a result,",
"bed in the corners and around the edge, when the",
"too hard to whatever is underneath? --- **EDIT:** The accepted",
"the nozzle out and put it back in, and the",
"while also making sure the piece does not stick too",
"initially, but then I took the nozzle out and put",
"own sometimes if I let them cool down to 30",
"made it perfect. No warping anymore. But now I have",
"piece warping up and not sticking to the bed in",
"have the opposite problem. When printing pieces with large flat",
"the Z calibration sensor due to the plate, eventually got",
"but that has put a few scratches on the bed.",
"nozzle out and put it back in, and the Z",
"I had some issues with the Z calibration sensor due",
"add-on. I'm using it exclusively with PLA. It worked great",
"sticking too well to the bottom of the piece. I",
"How to prevent warping, while also making sure the piece",
"adding a glass plate on top of the bed, with",
"the opposite problem. When printing pieces with large flat surfaces",
"instead of Kapton, but it's still sticking too well to",
"stick too hard to whatever is underneath? --- **EDIT:** The",
"a funny looking, rubbery, chewing-gum-y material that conducts heat). Now",
"bed) and that made it perfect. No warping anymore. But",
"I have the opposite problem. When printing pieces with large",
"plate (it's a funny looking, rubbery, chewing-gum-y material that conducts",
"I started tweaking the Z axis calibration (the fine adjustment",
"the bed, with a heat conductive layer between bed and",
"their own sometimes if I let them cool down to",
"piece does not stick too hard to whatever is underneath?",
"it is: I ended up adding a glass plate on",
"Finally I started tweaking the Z axis calibration (the fine",
"a knife under the piece, but that has put a",
"with a heat conductive layer between bed and plate (it's",
"sometimes if I let them cool down to 30 C",
"a thing). As a result, I started having issues with",
"I went back to using plain blue tape instead of",
"has put a few scratches on the bed. Obviously I",
"But now I have the opposite problem. When printing pieces",
"own \"answer\". So here it is: I ended up adding",
"with the Z calibration sensor due to the plate, eventually",
"don't want to mess with it by adding my own",
"up and not sticking to the bed in the corners",
"put it back in, and the Z calibration was lost",
"bed and plate (it's a funny looking, rubbery, chewing-gum-y material",
"(it's a funny looking, rubbery, chewing-gum-y material that conducts heat).",
"was lost (and I didn't know the calibration was a",
"issues with the piece warping up and not sticking to",
"made it perhaps a little better. Finally I started tweaking",
"and put it back in, and the Z calibration was",
"distance between nozzle and bed) and that made it perfect.",
"the piece, but that has put a few scratches on",
"worked great initially, but then I took the nozzle out",
"on the bed. Obviously I don't want to continue doing",
"I've installed the heated bed. I used Kapton tape. All",
"to continue doing that. What can I do? How to",
"know the calibration was a thing). As a result, I",
"started tweaking the Z axis calibration (the fine adjustment for",
"put a few scratches on the bed. Obviously I don't",
"don't want to continue doing that. What can I do?",
"chewing-gum-y material that conducts heat). Now I just apply glue",
"due to the plate, eventually got solved, but that would",
"--- **EDIT:** The accepted answer was very good and I",
"but it's still sticking too well to the bottom of",
"The accepted answer was very good and I don't want",
"piece. I tried to pry it off by pushing a",
"to 30 C or lower. I had some issues with",
"warping anymore. But now I have the opposite problem. When",
"it off by pushing a knife under the piece, but",
"glass and print. Works great. Large pieces come off on",
"What can I do? How to prevent warping, while also",
"is: I ended up adding a glass plate on top",
"that. What can I do? How to prevent warping, while",
"30 C or lower. I had some issues with the",
"print. Works great. Large pieces come off on their own",
"and flat. I've installed the heated bed. I used Kapton",
"nozzle and bed) and that made it perfect. No warping",
"want to continue doing that. What can I do? How",
"off by pushing a knife under the piece, but that",
"adjustment for the initial distance between nozzle and bed) and",
"it perhaps a little better. Finally I started tweaking the",
"then I took the nozzle out and put it back",
"printing pieces with large flat surfaces that are siting flush",
"whatever is underneath? --- **EDIT:** The accepted answer was very",
"bottom of the piece. I tried to pry it off",
"my own \"answer\". So here it is: I ended up",
"a Printrbot Play with a heated bed add-on. I'm using",
"under the piece, but that has put a few scratches",
"surfaces that are siting flush with the bed, it's next",
"Kapton tape. All these made it perhaps a little better.",
"conductive layer between bed and plate (it's a funny looking,",
"No warping anymore. But now I have the opposite problem.",
"do? How to prevent warping, while also making sure the",
"end. I went back to using plain blue tape instead",
"I do? How to prevent warping, while also making sure",
"the bed, it's next to impossible to tear it off",
"used Kapton tape. All these made it perhaps a little",
"bed, with a heat conductive layer between bed and plate",
"blue tape instead of Kapton, but it's still sticking too",
"I just apply glue stick on the glass and print.",
"them cool down to 30 C or lower. I had",
"I'm using it exclusively with PLA. It worked great initially,",
"with PLA. It worked great initially, but then I took",
"pushing a knife under the piece, but that has put",
"bed add-on. I'm using it exclusively with PLA. It worked",
"the bed. Obviously I don't want to continue doing that.",
"when the piece was large and flat. I've installed the",
"and that made it perfect. No warping anymore. But now",
"calibration was lost (and I didn't know the calibration was",
"issues with the Z calibration sensor due to the plate,",
"great. Large pieces come off on their own sometimes if",
"lower. I had some issues with the Z calibration sensor",
"funny looking, rubbery, chewing-gum-y material that conducts heat). Now I",
"it exclusively with PLA. It worked great initially, but then",
"the piece. I tried to pry it off by pushing",
"problem. When printing pieces with large flat surfaces that are",
"that are siting flush with the bed, it's next to",
"PLA. It worked great initially, but then I took the",
"the end. I went back to using plain blue tape",
"with the piece warping up and not sticking to the",
"to impossible to tear it off at the end. I",
"the edge, when the piece was large and flat. I've",
"the Z axis calibration (the fine adjustment for the initial",
"also making sure the piece does not stick too hard",
"bed, it's next to impossible to tear it off at",
"back to using plain blue tape instead of Kapton, but",
"it by adding my own \"answer\". So here it is:",
"not sticking to the bed in the corners and around",
"the piece warping up and not sticking to the bed",
"went back to using plain blue tape instead of Kapton,",
"the bottom of the piece. I tried to pry it",
"got solved, but that would take too long to explain",
"sensor due to the plate, eventually got solved, but that",
"thing). As a result, I started having issues with the",
"up adding a glass plate on top of the bed,",
"was large and flat. I've installed the heated bed. I",
"**EDIT:** The accepted answer was very good and I don't",
"C or lower. I had some issues with the Z",
"installed the heated bed. I used Kapton tape. All these",
"tear it off at the end. I went back to",
"using plain blue tape instead of Kapton, but it's still",
"perfect. No warping anymore. But now I have the opposite",
"ended up adding a glass plate on top of the",
"the initial distance between nozzle and bed) and that made",
"calibration (the fine adjustment for the initial distance between nozzle",
"here it is: I ended up adding a glass plate",
"rubbery, chewing-gum-y material that conducts heat). Now I just apply",
"that made it perfect. No warping anymore. But now I",
"calibration sensor due to the plate, eventually got solved, but",
"want to mess with it by adding my own \"answer\".",
"was a thing). As a result, I started having issues",
"answer was very good and I don't want to mess",
"back in, and the Z calibration was lost (and I",
"not stick too hard to whatever is underneath? --- **EDIT:**",
"bed. I used Kapton tape. All these made it perhaps",
"Z calibration sensor due to the plate, eventually got solved,",
"to whatever is underneath? --- **EDIT:** The accepted answer was",
"it off at the end. I went back to using",
"had some issues with the Z calibration sensor due to",
"initial distance between nozzle and bed) and that made it",
"to the bottom of the piece. I tried to pry",
"tried to pry it off by pushing a knife under",
"using it exclusively with PLA. It worked great initially, but",
"too well to the bottom of the piece. I tried",
"eventually got solved, but that would take too long to",
"top of the bed, with a heat conductive layer between",
"prevent warping, while also making sure the piece does not",
"plate, eventually got solved, but that would take too long",
"bed. Obviously I don't want to continue doing that. What",
"of the bed, with a heat conductive layer between bed",
"the piece was large and flat. I've installed the heated",
"doing that. What can I do? How to prevent warping,",
"glue stick on the glass and print. Works great. Large",
"of the piece. I tried to pry it off by",
"plate on top of the bed, with a heat conductive",
"the bed in the corners and around the edge, when",
"axis calibration (the fine adjustment for the initial distance between",
"pieces come off on their own sometimes if I let",
"Printrbot Play with a heated bed add-on. I'm using it",
"very good and I don't want to mess with it",
"and around the edge, when the piece was large and",
"it's still sticking too well to the bottom of the",
"Now I just apply glue stick on the glass and",
"on their own sometimes if I let them cool down",
"edge, when the piece was large and flat. I've installed",
"calibration was a thing). As a result, I started having",
"scratches on the bed. Obviously I don't want to continue",
"off on their own sometimes if I let them cool",
"a heat conductive layer between bed and plate (it's a",
"I ended up adding a glass plate on top of",
"opposite problem. When printing pieces with large flat surfaces that",
"was very good and I don't want to mess with",
"are siting flush with the bed, it's next to impossible",
"lost (and I didn't know the calibration was a thing).",
"better. Finally I started tweaking the Z axis calibration (the",
"I let them cool down to 30 C or lower.",
"the plate, eventually got solved, but that would take too",
"piece, but that has put a few scratches on the",
"large and flat. I've installed the heated bed. I used",
"I've a Printrbot Play with a heated bed add-on. I'm",
"that conducts heat). Now I just apply glue stick on",
"the glass and print. Works great. Large pieces come off",
"to the plate, eventually got solved, but that would take",
"exclusively with PLA. It worked great initially, but then I",
"to prevent warping, while also making sure the piece does",
"between bed and plate (it's a funny looking, rubbery, chewing-gum-y",
"the piece does not stick too hard to whatever is",
"by adding my own \"answer\". So here it is: I",
"or lower. I had some issues with the Z calibration",
"it's next to impossible to tear it off at the",
"I didn't know the calibration was a thing). As a",
"Large pieces come off on their own sometimes if I",
"solved, but that would take too long to explain here.",
"I don't want to mess with it by adding my",
"with a heated bed add-on. I'm using it exclusively with",
"corners and around the edge, when the piece was large",
"large flat surfaces that are siting flush with the bed,",
"anymore. But now I have the opposite problem. When printing",
"still sticking too well to the bottom of the piece.",
"material that conducts heat). Now I just apply glue stick",
"to tear it off at the end. I went back",
"the heated bed. I used Kapton tape. All these made",
"to mess with it by adding my own \"answer\". So",
"glass plate on top of the bed, with a heat",
"plain blue tape instead of Kapton, but it's still sticking",
"hard to whatever is underneath? --- **EDIT:** The accepted answer",
"I started having issues with the piece warping up and",
"accepted answer was very good and I don't want to",
"beginner. I've a Printrbot Play with a heated bed add-on.",
"perhaps a little better. Finally I started tweaking the Z",
"the Z calibration was lost (and I didn't know the",
"and plate (it's a funny looking, rubbery, chewing-gum-y material that",
"layer between bed and plate (it's a funny looking, rubbery,",
"of Kapton, but it's still sticking too well to the",
"siting flush with the bed, it's next to impossible to",
"and not sticking to the bed in the corners and",
"pieces with large flat surfaces that are siting flush with",
"it perfect. No warping anymore. But now I have the",
"and print. Works great. Large pieces come off on their",
"around the edge, when the piece was large and flat.",
"a little better. Finally I started tweaking the Z axis",
"does not stick too hard to whatever is underneath? ---",
"When printing pieces with large flat surfaces that are siting",
"a glass plate on top of the bed, with a",
"the corners and around the edge, when the piece was",
"heat). Now I just apply glue stick on the glass",
"well to the bottom of the piece. I tried to",
"looking, rubbery, chewing-gum-y material that conducts heat). Now I just",
"is underneath? --- **EDIT:** The accepted answer was very good",
"mess with it by adding my own \"answer\". So here",
"Kapton, but it's still sticking too well to the bottom",
"All these made it perhaps a little better. Finally I",
"few scratches on the bed. Obviously I don't want to",
"a beginner. I've a Printrbot Play with a heated bed",
"Obviously I don't want to continue doing that. What can",
"\"answer\". So here it is: I ended up adding a",
"adding my own \"answer\". So here it is: I ended",
"As a result, I started having issues with the piece",
"little better. Finally I started tweaking the Z axis calibration",
"heated bed. I used Kapton tape. All these made it",
"just apply glue stick on the glass and print. Works",
"some issues with the Z calibration sensor due to the",
"that has put a few scratches on the bed. Obviously",
"I used Kapton tape. All these made it perhaps a",
"with the bed, it's next to impossible to tear it",
"having issues with the piece warping up and not sticking",
"warping up and not sticking to the bed in the",
"took the nozzle out and put it back in, and",
"sticking to the bed in the corners and around the",
"the calibration was a thing). As a result, I started",
"tape. All these made it perhaps a little better. Finally",
"stick on the glass and print. Works great. Large pieces",
"knife under the piece, but that has put a few",
"flat. I've installed the heated bed. I used Kapton tape.",
"Play with a heated bed add-on. I'm using it exclusively",
"come off on their own sometimes if I let them",
"for the initial distance between nozzle and bed) and that",
"great initially, but then I took the nozzle out and",
"flat surfaces that are siting flush with the bed, it's",
"with it by adding my own \"answer\". So here it",
"Works great. Large pieces come off on their own sometimes",
"flush with the bed, it's next to impossible to tear",
"I'm a beginner. I've a Printrbot Play with a heated",
"heat conductive layer between bed and plate (it's a funny",
"started having issues with the piece warping up and not",
"a few scratches on the bed. Obviously I don't want",
"between nozzle and bed) and that made it perfect. No",
"conducts heat). Now I just apply glue stick on the",
"if I let them cool down to 30 C or",
"cool down to 30 C or lower. I had some",
"heated bed add-on. I'm using it exclusively with PLA. It",
"tweaking the Z axis calibration (the fine adjustment for the",
"result, I started having issues with the piece warping up",
"these made it perhaps a little better. Finally I started",
"at the end. I went back to using plain blue",
"I don't want to continue doing that. What can I",
"to the bed in the corners and around the edge,",
"So here it is: I ended up adding a glass",
"making sure the piece does not stick too hard to",
"fine adjustment for the initial distance between nozzle and bed)",
"let them cool down to 30 C or lower. I",
"(and I didn't know the calibration was a thing). As",
"it back in, and the Z calibration was lost (and",
"on top of the bed, with a heat conductive layer",
"piece was large and flat. I've installed the heated bed.",
"warping, while also making sure the piece does not stick",
"apply glue stick on the glass and print. Works great.",
"good and I don't want to mess with it by",
"but then I took the nozzle out and put it"
] |
[
"another posting where I asked how to heat this LARGE",
"on using my newly build MPCNC machine. It is capable",
"that I will soon be printing on using my newly",
"how to heat this LARGE glass bed. However, there weren't",
"glass is heated and cooled. This would weaken the cohesion",
"weren't any feasable (inexpensive and easy) solutions to heat the",
"this to the slight expansion and contraction that occurs when",
"printing on heated glass that is sprayed lightly with hairspray",
"GREAT success printing on heated glass that is sprayed lightly",
"I will soon be printing on using my newly build",
"glass. So, now with cold glass, what are some good",
"asked how to heat this LARGE glass bed. However, there",
"heated and cooled. This would weaken the cohesion of the",
"glass (36\"x26\") that I will soon be printing on using",
"that occurs when glass is heated and cooled. This would",
"where I asked how to heat this LARGE glass bed.",
"and being able to EASILY remove my prints after the",
"a LARGE piece of glass (36\"x26\") that I will soon",
"print to the glass. I have another posting where I",
"large 3d printed objects without breaking them or the glass?",
"glass has cooled. I attribute this to the slight expansion",
"sprayed lightly with hairspray using PLA and being able to",
"is sprayed lightly with hairspray using PLA and being able",
"glass. I have another posting where I asked how to",
"there weren't any feasable (inexpensive and easy) solutions to heat",
"to heat the glass. So, now with cold glass, what",
"that is sprayed lightly with hairspray using PLA and being",
"posting where I asked how to heat this LARGE glass",
"soon be printing on using my newly build MPCNC machine.",
"build MPCNC machine. It is capable of printing about 34\"x34\"x10\".",
"hairspray using PLA and being able to EASILY remove my",
"cooled. This would weaken the cohesion of the PLA print",
"and cooled. This would weaken the cohesion of the PLA",
"my newly build MPCNC machine. It is capable of printing",
"some good strategies for removing large 3d printed objects without",
"to the slight expansion and contraction that occurs when glass",
"now with cold glass, what are some good strategies for",
"cooled. I attribute this to the slight expansion and contraction",
"printing on using my newly build MPCNC machine. It is",
"would weaken the cohesion of the PLA print to the",
"heated glass that is sprayed lightly with hairspray using PLA",
"machine. It is capable of printing about 34\"x34\"x10\". Anyway, I",
"are some good strategies for removing large 3d printed objects",
"PLA print to the glass. I have another posting where",
"expansion and contraction that occurs when glass is heated and",
"heat the glass. So, now with cold glass, what are",
"I have a LARGE piece of glass (36\"x26\") that I",
"newly build MPCNC machine. It is capable of printing about",
"MPCNC machine. It is capable of printing about 34\"x34\"x10\". Anyway,",
"the glass. I have another posting where I asked how",
"Anyway, I have had GREAT success printing on heated glass",
"solutions to heat the glass. So, now with cold glass,",
"lightly with hairspray using PLA and being able to EASILY",
"cohesion of the PLA print to the glass. I have",
"slight expansion and contraction that occurs when glass is heated",
"occurs when glass is heated and cooled. This would weaken",
"heat this LARGE glass bed. However, there weren't any feasable",
"to EASILY remove my prints after the glass has cooled.",
"has cooled. I attribute this to the slight expansion and",
"being able to EASILY remove my prints after the glass",
"the cohesion of the PLA print to the glass. I",
"capable of printing about 34\"x34\"x10\". Anyway, I have had GREAT",
"prints after the glass has cooled. I attribute this to",
"contraction that occurs when glass is heated and cooled. This",
"of the PLA print to the glass. I have another",
"and contraction that occurs when glass is heated and cooled.",
"after the glass has cooled. I attribute this to the",
"piece of glass (36\"x26\") that I will soon be printing",
"It is capable of printing about 34\"x34\"x10\". Anyway, I have",
"I have had GREAT success printing on heated glass that",
"I have another posting where I asked how to heat",
"So, now with cold glass, what are some good strategies",
"is heated and cooled. This would weaken the cohesion of",
"the slight expansion and contraction that occurs when glass is",
"using my newly build MPCNC machine. It is capable of",
"(inexpensive and easy) solutions to heat the glass. So, now",
"weaken the cohesion of the PLA print to the glass.",
"of glass (36\"x26\") that I will soon be printing on",
"the glass has cooled. I attribute this to the slight",
"EASILY remove my prints after the glass has cooled. I",
"to heat this LARGE glass bed. However, there weren't any",
"glass bed. However, there weren't any feasable (inexpensive and easy)",
"This would weaken the cohesion of the PLA print to",
"LARGE piece of glass (36\"x26\") that I will soon be",
"this LARGE glass bed. However, there weren't any feasable (inexpensive",
"have had GREAT success printing on heated glass that is",
"and easy) solutions to heat the glass. So, now with",
"PLA and being able to EASILY remove my prints after",
"will soon be printing on using my newly build MPCNC",
"I attribute this to the slight expansion and contraction that",
"(36\"x26\") that I will soon be printing on using my",
"glass, what are some good strategies for removing large 3d",
"about 34\"x34\"x10\". Anyway, I have had GREAT success printing on",
"had GREAT success printing on heated glass that is sprayed",
"printing about 34\"x34\"x10\". Anyway, I have had GREAT success printing",
"success printing on heated glass that is sprayed lightly with",
"easy) solutions to heat the glass. So, now with cold",
"feasable (inexpensive and easy) solutions to heat the glass. So,",
"to the glass. I have another posting where I asked",
"using PLA and being able to EASILY remove my prints",
"with hairspray using PLA and being able to EASILY remove",
"bed. However, there weren't any feasable (inexpensive and easy) solutions",
"with cold glass, what are some good strategies for removing",
"for removing large 3d printed objects without breaking them or",
"removing large 3d printed objects without breaking them or the",
"have a LARGE piece of glass (36\"x26\") that I will",
"strategies for removing large 3d printed objects without breaking them",
"have another posting where I asked how to heat this",
"be printing on using my newly build MPCNC machine. It",
"However, there weren't any feasable (inexpensive and easy) solutions to",
"of printing about 34\"x34\"x10\". Anyway, I have had GREAT success",
"LARGE glass bed. However, there weren't any feasable (inexpensive and",
"attribute this to the slight expansion and contraction that occurs",
"my prints after the glass has cooled. I attribute this",
"able to EASILY remove my prints after the glass has",
"what are some good strategies for removing large 3d printed",
"is capable of printing about 34\"x34\"x10\". Anyway, I have had",
"any feasable (inexpensive and easy) solutions to heat the glass.",
"cold glass, what are some good strategies for removing large",
"remove my prints after the glass has cooled. I attribute",
"glass that is sprayed lightly with hairspray using PLA and",
"when glass is heated and cooled. This would weaken the",
"on heated glass that is sprayed lightly with hairspray using",
"I asked how to heat this LARGE glass bed. However,",
"34\"x34\"x10\". Anyway, I have had GREAT success printing on heated",
"the PLA print to the glass. I have another posting",
"the glass. So, now with cold glass, what are some",
"good strategies for removing large 3d printed objects without breaking"
] |
[
"printing in that ABS material? Is it too big?** [](https://i.stack.imgur.com/wqGB7.jpg)",
"by 35cm. **Is it going to be suitable for printing",
"could you tell me: It is a large flat panel,",
"It is a panel for the rear door. I want",
"suitable for printing in that ABS material? Is it too",
"to be suitable for printing in that ABS material? Is",
"am designing an part for my car. It is a",
"panel for the rear door. I want to add it",
"for the rear door. I want to add it some",
"door. I want to add it some cases for tools,",
"that ABS material? Is it too big?** [![enter image description",
"an part for my car. It is a panel for",
"around 100cm by 35cm. **Is it going to be suitable",
"for printing in that ABS material? Is it too big?**",
"35cm. **Is it going to be suitable for printing in",
"I want to add it some cases for tools, but",
"the rear door. I want to add it some cases",
"add it some cases for tools, but before going on,",
"it going to be suitable for printing in that ABS",
"going to be suitable for printing in that ABS material?",
"It is a large flat panel, around 100cm by 35cm.",
"on, could you tell me: It is a large flat",
"100cm by 35cm. **Is it going to be suitable for",
"in that ABS material? Is it too big?** [![enter image",
"my car. It is a panel for the rear door.",
"to add it some cases for tools, but before going",
"**Is it going to be suitable for printing in that",
"some cases for tools, but before going on, could you",
"large flat panel, around 100cm by 35cm. **Is it going",
"be suitable for printing in that ABS material? Is it",
"cases for tools, but before going on, could you tell",
"I am designing an part for my car. It is",
"panel, around 100cm by 35cm. **Is it going to be",
"it some cases for tools, but before going on, could",
"want to add it some cases for tools, but before",
"me: It is a large flat panel, around 100cm by",
"a panel for the rear door. I want to add",
"for my car. It is a panel for the rear",
"flat panel, around 100cm by 35cm. **Is it going to",
"designing an part for my car. It is a panel",
"a large flat panel, around 100cm by 35cm. **Is it",
"before going on, could you tell me: It is a"
] |
[
"tightly. I'd like for the structure to normally want to",
"let go, the two ends are now holding the puck",
"My first thought was something like a potato chip bag",
"that can \"pinch\" down onto a hockey puck shaped piece",
"puck into it. Once I let go, the two ends",
"the puck fairly tightly. My first thought was something like",
"a hockey puck shaped piece and hold it tightly. I'd",
"can \"pinch\" down onto a hockey puck shaped piece and",
"shove the hockey puck into it. Once I let go,",
"pry/force them open when I shove the hockey puck into",
"the structure to normally want to \"pinch\" two edges together,",
"wondering if anyone could give me tips for designing a",
"but I can pry/force them open when I shove the",
"clip, but that would require a couple pieces and a",
"hold it tightly. I'd like for the structure to normally",
"together, but I can pry/force them open when I shove",
"for designing a 3d printable structure that can \"pinch\" down",
"if anyone could give me tips for designing a 3d",
"can pry/force them open when I shove the hockey puck",
"fairly tightly. My first thought was something like a potato",
"tightly. My first thought was something like a potato chip",
"I was wondering if anyone could give me tips for",
"but that would require a couple pieces and a spring.",
"a couple pieces and a spring. Is there a way",
"there a way to do something like this with one",
"would require a couple pieces and a spring. Is there",
"give me tips for designing a 3d printable structure that",
"edges together, but I can pry/force them open when I",
"and hold it tightly. I'd like for the structure to",
"onto a hockey puck shaped piece and hold it tightly.",
"to normally want to \"pinch\" two edges together, but I",
"potato chip bag clip, but that would require a couple",
"I shove the hockey puck into it. Once I let",
"holding the puck fairly tightly. My first thought was something",
"I let go, the two ends are now holding the",
"tips for designing a 3d printable structure that can \"pinch\"",
"puck shaped piece and hold it tightly. I'd like for",
"it tightly. I'd like for the structure to normally want",
"shaped piece and hold it tightly. I'd like for the",
"pieces and a spring. Is there a way to do",
"was wondering if anyone could give me tips for designing",
"3d printable structure that can \"pinch\" down onto a hockey",
"are now holding the puck fairly tightly. My first thought",
"that would require a couple pieces and a spring. Is",
"structure to normally want to \"pinch\" two edges together, but",
"it. Once I let go, the two ends are now",
"the two ends are now holding the puck fairly tightly.",
"now holding the puck fairly tightly. My first thought was",
"way to do something like this with one solid piece?",
"for the structure to normally want to \"pinch\" two edges",
"down onto a hockey puck shaped piece and hold it",
"a way to do something like this with one solid",
"bag clip, but that would require a couple pieces and",
"like a potato chip bag clip, but that would require",
"piece and hold it tightly. I'd like for the structure",
"normally want to \"pinch\" two edges together, but I can",
"require a couple pieces and a spring. Is there a",
"hockey puck into it. Once I let go, the two",
"\"pinch\" two edges together, but I can pry/force them open",
"go, the two ends are now holding the puck fairly",
"ends are now holding the puck fairly tightly. My first",
"into it. Once I let go, the two ends are",
"a spring. Is there a way to do something like",
"designing a 3d printable structure that can \"pinch\" down onto",
"something like a potato chip bag clip, but that would",
"me tips for designing a 3d printable structure that can",
"a potato chip bag clip, but that would require a",
"hockey puck shaped piece and hold it tightly. I'd like",
"want to \"pinch\" two edges together, but I can pry/force",
"Is there a way to do something like this with",
"structure that can \"pinch\" down onto a hockey puck shaped",
"them open when I shove the hockey puck into it.",
"puck fairly tightly. My first thought was something like a",
"I can pry/force them open when I shove the hockey",
"couple pieces and a spring. Is there a way to",
"the hockey puck into it. Once I let go, the",
"Once I let go, the two ends are now holding",
"open when I shove the hockey puck into it. Once",
"two edges together, but I can pry/force them open when",
"\"pinch\" down onto a hockey puck shaped piece and hold",
"was something like a potato chip bag clip, but that",
"two ends are now holding the puck fairly tightly. My",
"chip bag clip, but that would require a couple pieces",
"could give me tips for designing a 3d printable structure",
"I'd like for the structure to normally want to \"pinch\"",
"when I shove the hockey puck into it. Once I",
"spring. Is there a way to do something like this",
"first thought was something like a potato chip bag clip,",
"printable structure that can \"pinch\" down onto a hockey puck",
"anyone could give me tips for designing a 3d printable",
"like for the structure to normally want to \"pinch\" two",
"thought was something like a potato chip bag clip, but",
"and a spring. Is there a way to do something",
"a 3d printable structure that can \"pinch\" down onto a",
"to \"pinch\" two edges together, but I can pry/force them"
] |
[
"a consulting job in a clinic of dental CT scans.",
"used for both visualization and analysis of 3D models, such",
"did not find any documentation or tool for this purpose",
"format. The files in STL format will be used for",
"really with a gande urgency in the solution. Advance grateful",
"The files in STL format will be used for both",
"morning everyone, I am developing a consulting job in a",
"am developing a consulting job in a clinic of dental",
"files in STL format will be used for both visualization",
"to STL format. The files in STL format will be",
"for this purpose in our searches and we are really",
"both visualization and analysis of 3D models, such as printing",
"such as printing in 3D printers. Our problem is just",
"We did not find any documentation or tool for this",
"a clinic of dental CT scans. This work involves the",
"conversion DICOM to STL. Has anyone come across this kind",
"administrative software, and preparing a routine for conversion of tomographic",
"for conversion of tomographic files in DICOM format to STL",
"documentation or tool for this purpose in our searches and",
"in a clinic of dental CT scans. This work involves",
"routine for conversion of tomographic files in DICOM format to",
"in STL format will be used for both visualization and",
"involves the development of administrative software, and preparing a routine",
"the development of administrative software, and preparing a routine for",
"job in a clinic of dental CT scans. This work",
"across this kind of situation? We did not find any",
"of tomographic files in DICOM format to STL format. The",
"of situation? We did not find any documentation or tool",
"or tool for this purpose in our searches and we",
"dental CT scans. This work involves the development of administrative",
"any documentation or tool for this purpose in our searches",
"files in DICOM format to STL format. The files in",
"to STL. Has anyone come across this kind of situation?",
"our searches and we are really with a gande urgency",
"a gande urgency in the solution. Advance grateful for any",
"I am developing a consulting job in a clinic of",
"DICOM to STL. Has anyone come across this kind of",
"the conversion DICOM to STL. Has anyone come across this",
"just the conversion DICOM to STL. Has anyone come across",
"STL. Has anyone come across this kind of situation? We",
"find any documentation or tool for this purpose in our",
"of dental CT scans. This work involves the development of",
"software, and preparing a routine for conversion of tomographic files",
"be used for both visualization and analysis of 3D models,",
"format to STL format. The files in STL format will",
"in DICOM format to STL format. The files in STL",
"STL format. The files in STL format will be used",
"with a gande urgency in the solution. Advance grateful for",
"conversion of tomographic files in DICOM format to STL format.",
"consulting job in a clinic of dental CT scans. This",
"STL format will be used for both visualization and analysis",
"purpose in our searches and we are really with a",
"and we are really with a gande urgency in the",
"as printing in 3D printers. Our problem is just the",
"a routine for conversion of tomographic files in DICOM format",
"searches and we are really with a gande urgency in",
"tool for this purpose in our searches and we are",
"for both visualization and analysis of 3D models, such as",
"work involves the development of administrative software, and preparing a",
"development of administrative software, and preparing a routine for conversion",
"preparing a routine for conversion of tomographic files in DICOM",
"everyone, I am developing a consulting job in a clinic",
"not find any documentation or tool for this purpose in",
"is just the conversion DICOM to STL. Has anyone come",
"visualization and analysis of 3D models, such as printing in",
"kind of situation? We did not find any documentation or",
"anyone come across this kind of situation? We did not",
"DICOM format to STL format. The files in STL format",
"printing in 3D printers. Our problem is just the conversion",
"3D models, such as printing in 3D printers. Our problem",
"printers. Our problem is just the conversion DICOM to STL.",
"in 3D printers. Our problem is just the conversion DICOM",
"Has anyone come across this kind of situation? We did",
"This work involves the development of administrative software, and preparing",
"tomographic files in DICOM format to STL format. The files",
"of 3D models, such as printing in 3D printers. Our",
"we are really with a gande urgency in the solution.",
"models, such as printing in 3D printers. Our problem is",
"developing a consulting job in a clinic of dental CT",
"Good morning everyone, I am developing a consulting job in",
"gande urgency in the solution. Advance grateful for any assistance.",
"Our problem is just the conversion DICOM to STL. Has",
"3D printers. Our problem is just the conversion DICOM to",
"scans. This work involves the development of administrative software, and",
"are really with a gande urgency in the solution. Advance",
"come across this kind of situation? We did not find",
"this purpose in our searches and we are really with",
"CT scans. This work involves the development of administrative software,",
"will be used for both visualization and analysis of 3D",
"analysis of 3D models, such as printing in 3D printers.",
"and preparing a routine for conversion of tomographic files in",
"problem is just the conversion DICOM to STL. Has anyone",
"in our searches and we are really with a gande",
"format will be used for both visualization and analysis of",
"of administrative software, and preparing a routine for conversion of",
"situation? We did not find any documentation or tool for",
"clinic of dental CT scans. This work involves the development",
"this kind of situation? We did not find any documentation",
"and analysis of 3D models, such as printing in 3D"
] |
[
"upload it to Shapeways as a STL file, fixed the",
"I designed in Blender on Shapeways. The object has a",
"object in Shapeways: [](https://i.stack.imgur.com/6P9iO.png) What could cause",
"Shapeways: [](https://i.stack.imgur.com/6P9iO.png) What could cause this? Will",
"I am trying to print a model I designed in",
"am trying to print a model I designed in Blender",
"filled up in the preview window for the object in",
"the preview window for the object in Shapeways: [](https://i.stack.imgur.com/6P9iO.png) What could",
"description here](https://i.stack.imgur.com/6P9iO.png)](https://i.stack.imgur.com/6P9iO.png) What could cause this? Will the model print",
"this? Will the model print properly? (I cannot share the",
"has a hole in it: [](https://i.stack.imgur.com/iCaGP.png) But",
"Will the model print properly? (I cannot share the model",
"[](https://i.stack.imgur.com/iCaGP.png) But when I upload it to",
"up in the preview window for the object in Shapeways:",
"STL file, fixed the sizes, but the hole is filled",
"model I designed in Blender on Shapeways. The object has",
"on Shapeways. The object has a hole in it: [](https://i.stack.imgur.com/iCaGP.png) But when I upload it to Shapeways as a",
"What could cause this? Will the model print properly? (I",
"description here](https://i.stack.imgur.com/iCaGP.png)](https://i.stack.imgur.com/iCaGP.png) But when I upload it to Shapeways as",
"But when I upload it to Shapeways as a STL",
"to print a model I designed in Blender on Shapeways.",
"Blender on Shapeways. The object has a hole in it:",
"sizes, but the hole is filled up in the preview",
"but the hole is filled up in the preview window",
"The object has a hole in it: [](https://i.stack.imgur.com/iCaGP.png)",
"it: [](https://i.stack.imgur.com/iCaGP.png) But when I upload it",
"cause this? Will the model print properly? (I cannot share",
"a STL file, fixed the sizes, but the hole is",
"I upload it to Shapeways as a STL file, fixed",
"in the preview window for the object in Shapeways: [](https://i.stack.imgur.com/6P9iO.png) What could cause this? Will the model print properly?",
"for the object in Shapeways: [](https://i.stack.imgur.com/6P9iO.png) What",
"image description here](https://i.stack.imgur.com/6P9iO.png)](https://i.stack.imgur.com/6P9iO.png) What could cause this? Will the model",
"file, fixed the sizes, but the hole is filled up",
"trying to print a model I designed in Blender on",
"hole in it: [](https://i.stack.imgur.com/iCaGP.png) But when I",
"a model I designed in Blender on Shapeways. The object",
"image description here](https://i.stack.imgur.com/iCaGP.png)](https://i.stack.imgur.com/iCaGP.png) But when I upload it to Shapeways",
"the hole is filled up in the preview window for",
"the sizes, but the hole is filled up in the",
"window for the object in Shapeways: [](https://i.stack.imgur.com/6P9iO.png)",
"Shapeways. The object has a hole in it: [](https://i.stack.imgur.com/6P9iO.png) What could cause this?",
"Shapeways as a STL file, fixed the sizes, but the",
"in it: [](https://i.stack.imgur.com/iCaGP.png) But when I upload",
"[](https://i.stack.imgur.com/6P9iO.png) What could cause this? Will the",
"print a model I designed in Blender on Shapeways. The",
"a hole in it: [](https://i.stack.imgur.com/iCaGP.png) But when"
] |
[
"is not moving anymore! The first thing I have done",
"all up and nothing, still not working for the same",
"later the X-axis motor into the extruder connector and is",
"extruder motor that won't work anymore! Do you guys have",
"to help me with the fixing process that I'm currently",
"step motor which push the filament from the back and",
"driver and they seems to work all well. So the",
"I have done was to check if the motor was",
"a new step motor and new Arduino + motherboard, connected",
"motherboard, connected all up and nothing, still not working for",
"reason! It is just the extruder motor that won't work",
"I swap the extruder motor with the X-axis one and",
"printing session my Ultimaker original unexpectedly stop working. The problem",
"The problem was on the extruder step motor which push",
"this question here hoping someone will be able to help",
"process that I'm currently involved in! Last week during a",
"and it then worked fine. Then later the X-axis motor",
"fine. Then later the X-axis motor into the extruder connector",
"still not working for the same reason! It is just",
"help will be much appreciated and looking forward for some",
"same reason! It is just the extruder motor that won't",
"won't work anymore! Do you guys have some idea or",
"Arduino + motherboard, connected all up and nothing, still not",
"one and it then worked fine. Then later the X-axis",
"how can be fixed in alternative ways? Your help will",
"then worked fine. Then later the X-axis motor into the",
"extruder motor with the X-axis one and it then worked",
"and new Arduino + motherboard, connected all up and nothing,",
"extruder step motor which push the filament from the back",
"working for the same reason! It is just the extruder",
"the step driver and they seems to work all well.",
"back and literally is not moving anymore! The first thing",
"the X-axis motor into the extruder connector and is not",
"swap the extruder motor with the X-axis one and it",
"have done was to check if the motor was burn",
"and is not moving! so I decided to check the",
"just the extruder motor that won't work anymore! Do you",
"some idea or tips to find out what the problem",
"the fixing process that I'm currently involved in! Last week",
"bought new step driver a new step motor and new",
"and nothing, still not working for the same reason! It",
"my Ultimaker original unexpectedly stop working. The problem was on",
"seems to work all well. So the problem must be",
"the X-axis one and it then worked fine. Then later",
"me with the fixing process that I'm currently involved in!",
"was burn or something similar. So I swap the extruder",
"so I decided to check the step driver and they",
"not working for the same reason! It is just the",
"the extruder motor with the X-axis one and it then",
"original unexpectedly stop working. The problem was on the extruder",
"motherboard! I bought new step driver a new step motor",
"that won't work anymore! Do you guys have some idea",
"fixed in alternative ways? Your help will be much appreciated",
"the same reason! It is just the extruder motor that",
"will be able to help me with the fixing process",
"find out what the problem can be or how can",
"new step motor and new Arduino + motherboard, connected all",
"literally is not moving anymore! The first thing I have",
"if the motor was burn or something similar. So I",
"decided to check the step driver and they seems to",
"driver a new step motor and new Arduino + motherboard,",
"guys have some idea or tips to find out what",
"can be fixed in alternative ways? Your help will be",
"writing this question here hoping someone will be able to",
"currently involved in! Last week during a printing session my",
"first thing I have done was to check if the",
"thing I have done was to check if the motor",
"with the fixing process that I'm currently involved in! Last",
"into the extruder connector and is not moving! so I",
"is not moving! so I decided to check the step",
"check the step driver and they seems to work all",
"tips to find out what the problem can be or",
"from the back and literally is not moving anymore! The",
"the motor was burn or something similar. So I swap",
"to work all well. So the problem must be on",
"Arduino or on the motherboard! I bought new step driver",
"the extruder connector and is not moving! so I decided",
"not moving! so I decided to check the step driver",
"X-axis one and it then worked fine. Then later the",
"work anymore! Do you guys have some idea or tips",
"step driver a new step motor and new Arduino +",
"alternative ways? Your help will be much appreciated and looking",
"motor was burn or something similar. So I swap the",
"here hoping someone will be able to help me with",
"all well. So the problem must be on the Arduino",
"moving anymore! The first thing I have done was to",
"involved in! Last week during a printing session my Ultimaker",
"you guys have some idea or tips to find out",
"motor and new Arduino + motherboard, connected all up and",
"on the motherboard! I bought new step driver a new",
"and literally is not moving anymore! The first thing I",
"in! Last week during a printing session my Ultimaker original",
"anymore! Do you guys have some idea or tips to",
"or something similar. So I swap the extruder motor with",
"on the Arduino or on the motherboard! I bought new",
"and they seems to work all well. So the problem",
"which push the filament from the back and literally is",
"I'm currently involved in! Last week during a printing session",
"was on the extruder step motor which push the filament",
"motor with the X-axis one and it then worked fine.",
"filament from the back and literally is not moving anymore!",
"problem can be or how can be fixed in alternative",
"ways? Your help will be much appreciated and looking forward",
"be or how can be fixed in alternative ways? Your",
"check if the motor was burn or something similar. So",
"problem was on the extruder step motor which push the",
"week during a printing session my Ultimaker original unexpectedly stop",
"motor into the extruder connector and is not moving! so",
"session my Ultimaker original unexpectedly stop working. The problem was",
"extruder connector and is not moving! so I decided to",
"Then later the X-axis motor into the extruder connector and",
"I decided to check the step driver and they seems",
"that I'm currently involved in! Last week during a printing",
"work all well. So the problem must be on the",
"Ultimaker original unexpectedly stop working. The problem was on the",
"connected all up and nothing, still not working for the",
"in alternative ways? Your help will be much appreciated and",
"I bought new step driver a new step motor and",
"able to help me with the fixing process that I'm",
"something similar. So I swap the extruder motor with the",
"well. So the problem must be on the Arduino or",
"the extruder motor that won't work anymore! Do you guys",
"The first thing I have done was to check if",
"have some idea or tips to find out what the",
"unexpectedly stop working. The problem was on the extruder step",
"the back and literally is not moving anymore! The first",
"must be on the Arduino or on the motherboard! I",
"during a printing session my Ultimaker original unexpectedly stop working.",
"So the problem must be on the Arduino or on",
"up and nothing, still not working for the same reason!",
"similar. So I swap the extruder motor with the X-axis",
"the Arduino or on the motherboard! I bought new step",
"motor that won't work anymore! Do you guys have some",
"It is just the extruder motor that won't work anymore!",
"the problem can be or how can be fixed in",
"with the X-axis one and it then worked fine. Then",
"push the filament from the back and literally is not",
"idea or tips to find out what the problem can",
"be on the Arduino or on the motherboard! I bought",
"help me with the fixing process that I'm currently involved",
"stop working. The problem was on the extruder step motor",
"on the extruder step motor which push the filament from",
"problem must be on the Arduino or on the motherboard!",
"the motherboard! I bought new step driver a new step",
"is just the extruder motor that won't work anymore! Do",
"to find out what the problem can be or how",
"Do you guys have some idea or tips to find",
"to check if the motor was burn or something similar.",
"what the problem can be or how can be fixed",
"So I swap the extruder motor with the X-axis one",
"someone will be able to help me with the fixing",
"step driver and they seems to work all well. So",
"or on the motherboard! I bought new step driver a",
"can be or how can be fixed in alternative ways?",
"or tips to find out what the problem can be",
"connector and is not moving! so I decided to check",
"question here hoping someone will be able to help me",
"worked fine. Then later the X-axis motor into the extruder",
"step motor and new Arduino + motherboard, connected all up",
"the problem must be on the Arduino or on the",
"be fixed in alternative ways? Your help will be much",
"working. The problem was on the extruder step motor which",
"moving! so I decided to check the step driver and",
"a printing session my Ultimaker original unexpectedly stop working. The",
"be able to help me with the fixing process that",
"burn or something similar. So I swap the extruder motor",
"the extruder step motor which push the filament from the",
"new step driver a new step motor and new Arduino",
"I'm writing this question here hoping someone will be able",
"out what the problem can be or how can be",
"X-axis motor into the extruder connector and is not moving!",
"will be much appreciated and looking forward for some answers.",
"to check the step driver and they seems to work",
"done was to check if the motor was burn or",
"hoping someone will be able to help me with the",
"anymore! The first thing I have done was to check",
"fixing process that I'm currently involved in! Last week during",
"motor which push the filament from the back and literally",
"was to check if the motor was burn or something",
"the filament from the back and literally is not moving",
"Your help will be much appreciated and looking forward for",
"for the same reason! It is just the extruder motor",
"Last week during a printing session my Ultimaker original unexpectedly",
"not moving anymore! The first thing I have done was",
"new Arduino + motherboard, connected all up and nothing, still",
"nothing, still not working for the same reason! It is",
"it then worked fine. Then later the X-axis motor into",
"+ motherboard, connected all up and nothing, still not working",
"they seems to work all well. So the problem must",
"or how can be fixed in alternative ways? Your help"
] |
[
"destroying the PLA parts? Wikipedia proposes the following: * nitromethane",
"bond PLA. I have created several electronics enclosures. (Definitely the",
"the project.) Now my question is which debonder/solvent can I",
"use to separate the pieces again without destroying the PLA",
"debonder/solvent can I use to separate the pieces again without",
"the following: * nitromethane * dimethyl sulfoxide, * methylene chloride,",
"project.) Now my question is which debonder/solvent can I use",
"cyanoacrylate glue aka superglue to bond PLA. I have created",
"without destroying the PLA parts? Wikipedia proposes the following: *",
"Wikipedia proposes the following: * nitromethane * dimethyl sulfoxide, *",
"have used cyanoacrylate glue aka superglue to bond PLA. I",
"separate the pieces again without destroying the PLA parts? Wikipedia",
"used cyanoacrylate glue aka superglue to bond PLA. I have",
"to separate the pieces again without destroying the PLA parts?",
"proposes the following: * nitromethane * dimethyl sulfoxide, * methylene",
"have created several electronics enclosures. (Definitely the most time-consuming part",
"question is which debonder/solvent can I use to separate the",
"time-consuming part of the project.) Now my question is which",
"PLA. I have created several electronics enclosures. (Definitely the most",
"glue aka superglue to bond PLA. I have created several",
"can I use to separate the pieces again without destroying",
"which debonder/solvent can I use to separate the pieces again",
"I use to separate the pieces again without destroying the",
"I have used cyanoacrylate glue aka superglue to bond PLA.",
"is which debonder/solvent can I use to separate the pieces",
"pieces again without destroying the PLA parts? Wikipedia proposes the",
"following: * nitromethane * dimethyl sulfoxide, * methylene chloride, *",
"most time-consuming part of the project.) Now my question is",
"to bond PLA. I have created several electronics enclosures. (Definitely",
"superglue to bond PLA. I have created several electronics enclosures.",
"the pieces again without destroying the PLA parts? Wikipedia proposes",
"the PLA parts? Wikipedia proposes the following: * nitromethane *",
"PLA parts? Wikipedia proposes the following: * nitromethane * dimethyl",
"electronics enclosures. (Definitely the most time-consuming part of the project.)",
"* nitromethane * dimethyl sulfoxide, * methylene chloride, * gamma-Butyrolactone.",
"Now my question is which debonder/solvent can I use to",
"parts? Wikipedia proposes the following: * nitromethane * dimethyl sulfoxide,",
"several electronics enclosures. (Definitely the most time-consuming part of the",
"created several electronics enclosures. (Definitely the most time-consuming part of",
"enclosures. (Definitely the most time-consuming part of the project.) Now",
"aka superglue to bond PLA. I have created several electronics",
"(Definitely the most time-consuming part of the project.) Now my",
"my question is which debonder/solvent can I use to separate",
"the most time-consuming part of the project.) Now my question",
"part of the project.) Now my question is which debonder/solvent",
"of the project.) Now my question is which debonder/solvent can",
"I have created several electronics enclosures. (Definitely the most time-consuming",
"again without destroying the PLA parts? Wikipedia proposes the following:"
] |
[
"tension load and no bending deformation when a perpendicular force",
"can handle a large tension load and no bending deformation",
"when a perpendicular force is applied to it. Any suggestions?",
"bending deformation when a perpendicular force is applied to it.",
"strong filament that can handle a large tension load and",
"a strong filament that can handle a large tension load",
"looking for a strong filament that can handle a large",
"I'm looking for a strong filament that can handle a",
"that can handle a large tension load and no bending",
"and no bending deformation when a perpendicular force is applied",
"filament that can handle a large tension load and no",
"load and no bending deformation when a perpendicular force is",
"no bending deformation when a perpendicular force is applied to",
"deformation when a perpendicular force is applied to it. Any",
"handle a large tension load and no bending deformation when",
"a large tension load and no bending deformation when a",
"for a strong filament that can handle a large tension",
"large tension load and no bending deformation when a perpendicular"
] |
[
"have, or are there certain specs on a new not-so-cheap",
"to the heated bed, which uses considerably more Ampage than",
"bother me, but we're getting into the cold months, and",
"My [12V DC 30A Power Supply 360W Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) is",
"well for setting up the motors; but now that I'm",
"months, and now I'm afraid of ending up using too",
"the cheap power supply I already have, or are there",
"we're getting into the cold months, and now I'm afraid",
"for setting up the motors; but now that I'm on",
"too much ampage just trying to heat the bed in",
"out for in terms of using the either the cheap",
"trying to heat the bed in the winter months...(and I",
"really cheap, and it's worked well for setting up the",
"it's worked well for setting up the motors; but now",
"up using too much ampage just trying to heat the",
"using the either the cheap power supply I already have,",
"the bed in the winter months...(and I don't mean my",
"longer, maybe it wouldn't bother me, but we're getting into",
"getting into the cold months, and now I'm afraid of",
"and it's worked well for setting up the motors; but",
"the cold months, and now I'm afraid of ending up",
"continue using it; if the summer was a bit longer,",
"of ending up using too much ampage just trying to",
"look out for in terms of using the either the",
"that of just the motors, I'll confess, I'm getting frightened",
"bed). Is there anything I should look out for in",
"either the cheap power supply I already have, or are",
"bed in the winter months...(and I don't mean my bed).",
"Supply 360W Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) is really cheap, and it's worked",
"considerably more Ampage than that of just the motors, I'll",
"Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) is really cheap, and it's worked well for",
"much ampage just trying to heat the bed in the",
"is really cheap, and it's worked well for setting up",
"are there certain specs on a new not-so-cheap power supply",
"getting frightened to continue using it; if the summer was",
"mean my bed). Is there anything I should look out",
"but now that I'm on to the heated bed, which",
"ending up using too much ampage just trying to heat",
"on to the heated bed, which uses considerably more Ampage",
"just trying to heat the bed in the winter months...(and",
"there certain specs on a new not-so-cheap power supply that",
"afraid of ending up using too much ampage just trying",
"power supply I already have, or are there certain specs",
"or are there certain specs on a new not-so-cheap power",
"uses considerably more Ampage than that of just the motors,",
"the summer was a bit longer, maybe it wouldn't bother",
"me, but we're getting into the cold months, and now",
"specs on a new not-so-cheap power supply that I ought",
"cheap power supply I already have, or are there certain",
"it wouldn't bother me, but we're getting into the cold",
"I'll confess, I'm getting frightened to continue using it; if",
"setting up the motors; but now that I'm on to",
"cheap, and it's worked well for setting up the motors;",
"now that I'm on to the heated bed, which uses",
"than that of just the motors, I'll confess, I'm getting",
"new not-so-cheap power supply that I ought to be using",
"the winter months...(and I don't mean my bed). Is there",
"not-so-cheap power supply that I ought to be using instead?",
"a new not-so-cheap power supply that I ought to be",
"don't mean my bed). Is there anything I should look",
"I should look out for in terms of using the",
"the heated bed, which uses considerably more Ampage than that",
"in the winter months...(and I don't mean my bed). Is",
"30A Power Supply 360W Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) is really cheap, and",
"Ampage than that of just the motors, I'll confess, I'm",
"for in terms of using the either the cheap power",
"anything I should look out for in terms of using",
"confess, I'm getting frightened to continue using it; if the",
"maybe it wouldn't bother me, but we're getting into the",
"months...(and I don't mean my bed). Is there anything I",
"certain specs on a new not-so-cheap power supply that I",
"to continue using it; if the summer was a bit",
"360W Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) is really cheap, and it's worked well",
"should look out for in terms of using the either",
"a bit longer, maybe it wouldn't bother me, but we're",
"of just the motors, I'll confess, I'm getting frightened to",
"I already have, or are there certain specs on a",
"ampage just trying to heat the bed in the winter",
"bed, which uses considerably more Ampage than that of just",
"up the motors; but now that I'm on to the",
"DC 30A Power Supply 360W Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) is really cheap,",
"heat the bed in the winter months...(and I don't mean",
"the motors; but now that I'm on to the heated",
"the motors, I'll confess, I'm getting frightened to continue using",
"that I'm on to the heated bed, which uses considerably",
"which uses considerably more Ampage than that of just the",
"was a bit longer, maybe it wouldn't bother me, but",
"winter months...(and I don't mean my bed). Is there anything",
"the either the cheap power supply I already have, or",
"I'm on to the heated bed, which uses considerably more",
"now I'm afraid of ending up using too much ampage",
"Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) is really cheap, and it's worked well for setting",
"worked well for setting up the motors; but now that",
"bit longer, maybe it wouldn't bother me, but we're getting",
"[12V DC 30A Power Supply 360W Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) is really",
"summer was a bit longer, maybe it wouldn't bother me,",
"motors; but now that I'm on to the heated bed,",
"I'm afraid of ending up using too much ampage just",
"on a new not-so-cheap power supply that I ought to",
"of using the either the cheap power supply I already",
"just the motors, I'll confess, I'm getting frightened to continue",
"but we're getting into the cold months, and now I'm",
"Is there anything I should look out for in terms",
"I'm getting frightened to continue using it; if the summer",
"terms of using the either the cheap power supply I",
"using it; if the summer was a bit longer, maybe",
"and now I'm afraid of ending up using too much",
"supply I already have, or are there certain specs on",
"already have, or are there certain specs on a new",
"it; if the summer was a bit longer, maybe it",
"cold months, and now I'm afraid of ending up using",
"wouldn't bother me, but we're getting into the cold months,",
"I don't mean my bed). Is there anything I should",
"into the cold months, and now I'm afraid of ending",
"using too much ampage just trying to heat the bed",
"my bed). Is there anything I should look out for",
"motors, I'll confess, I'm getting frightened to continue using it;",
"heated bed, which uses considerably more Ampage than that of",
"to heat the bed in the winter months...(and I don't",
"if the summer was a bit longer, maybe it wouldn't",
"in terms of using the either the cheap power supply",
"there anything I should look out for in terms of",
"frightened to continue using it; if the summer was a",
"more Ampage than that of just the motors, I'll confess,",
"Power Supply 360W Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) is really cheap, and it's"
] |
[
"for short prints and it usually finishes successfully. When I",
"nozzle (I've added aluminum foil around the nozzle to make",
"to compensate for heat creep). This works very well for",
"and it usually finishes successfully. When I do a longer",
"sender and M3D Fio. I know it is not clogged",
"at 215 °C with the same filament and it stops",
"was plagued with issues afterward. I've done the fixes from",
"cool down, it extrudes fine. What is causing my printer",
"and usually at the same exact point. I tried printing",
"midway and usually at the same exact point. I tried",
"and cooling of the nozzle (I've added aluminum foil around",
"and then was plagued with issues afterward. I've done the",
"hotend is fit snug against the nozzle and I've added",
"stops midway and usually at the same exact point. I",
"I know it is not clogged because if I stop",
"and I've added an external fan, powered externally, to compensate",
"tried printing at 200 °C with black PLA and then",
"nozzle to make sure the hotend is fit snug against",
"Fio. I know it is not clogged because if I",
"against the nozzle and I've added an external fan, powered",
"M3D Fio. I know it is not clogged because if",
"fixes from the forum to get proper heating and cooling",
"a longer print it always stops midway and usually at",
"proper heating and cooling of the nozzle (I've added aluminum",
"that printed fine for a couple of weeks and then",
"around the nozzle to make sure the hotend is fit",
"filament. I am using CURA slicer with Octoprint GCODE sender",
"I stop the print and press extrude without letting it",
"white filament. I am using CURA slicer with Octoprint GCODE",
"exact point. I tried printing at 200 °C with black",
"then was plagued with issues afterward. I've done the fixes",
"also tried M3D brand white filament. I am using CURA",
"do a longer print it always stops midway and usually",
"same exact point. I tried printing at 200 °C with",
"°C with the same filament and it stops at the",
"to get proper heating and cooling of the nozzle (I've",
"and it stops at the same exact point. I also",
"°C with black PLA and then again at 215 °C",
"heating and cooling of the nozzle (I've added aluminum foil",
"heat creep). This works very well for short prints and",
"and press extrude without letting it cool down, it extrudes",
"the forum to get proper heating and cooling of the",
"have an M3D Micro 3D printer that printed fine for",
"the hotend is fit snug against the nozzle and I've",
"at the same exact point. I also tried M3D brand",
"it always stops midway and usually at the same exact",
"added aluminum foil around the nozzle to make sure the",
"snug against the nozzle and I've added an external fan,",
"CURA slicer with Octoprint GCODE sender and M3D Fio. I",
"the nozzle and I've added an external fan, powered externally,",
"200 °C with black PLA and then again at 215",
"at the same exact point. I tried printing at 200",
"cooling of the nozzle (I've added aluminum foil around the",
"nozzle and I've added an external fan, powered externally, to",
"it cool down, it extrudes fine. What is causing my",
"finishes successfully. When I do a longer print it always",
"done the fixes from the forum to get proper heating",
"I've done the fixes from the forum to get proper",
"for heat creep). This works very well for short prints",
"successfully. When I do a longer print it always stops",
"without letting it cool down, it extrudes fine. What is",
"is fit snug against the nozzle and I've added an",
"same filament and it stops at the same exact point.",
"because if I stop the print and press extrude without",
"stop the print and press extrude without letting it cool",
"black PLA and then again at 215 °C with the",
"longer print it always stops midway and usually at the",
"printing at 200 °C with black PLA and then again",
"PLA and then again at 215 °C with the same",
"make sure the hotend is fit snug against the nozzle",
"the same exact point. I tried printing at 200 °C",
"am using CURA slicer with Octoprint GCODE sender and M3D",
"3D printer that printed fine for a couple of weeks",
"externally, to compensate for heat creep). This works very well",
"an external fan, powered externally, to compensate for heat creep).",
"well for short prints and it usually finishes successfully. When",
"know it is not clogged because if I stop the",
"extrudes fine. What is causing my printer to stop printing?",
"plagued with issues afterward. I've done the fixes from the",
"(I've added aluminum foil around the nozzle to make sure",
"and M3D Fio. I know it is not clogged because",
"with Octoprint GCODE sender and M3D Fio. I know it",
"fit snug against the nozzle and I've added an external",
"not clogged because if I stop the print and press",
"to make sure the hotend is fit snug against the",
"always stops midway and usually at the same exact point.",
"weeks and then was plagued with issues afterward. I've done",
"aluminum foil around the nozzle to make sure the hotend",
"point. I tried printing at 200 °C with black PLA",
"get proper heating and cooling of the nozzle (I've added",
"stops at the same exact point. I also tried M3D",
"I've added an external fan, powered externally, to compensate for",
"printed fine for a couple of weeks and then was",
"GCODE sender and M3D Fio. I know it is not",
"short prints and it usually finishes successfully. When I do",
"I have an M3D Micro 3D printer that printed fine",
"powered externally, to compensate for heat creep). This works very",
"of the nozzle (I've added aluminum foil around the nozzle",
"M3D brand white filament. I am using CURA slicer with",
"usually finishes successfully. When I do a longer print it",
"very well for short prints and it usually finishes successfully.",
"fine for a couple of weeks and then was plagued",
"forum to get proper heating and cooling of the nozzle",
"external fan, powered externally, to compensate for heat creep). This",
"slicer with Octoprint GCODE sender and M3D Fio. I know",
"is not clogged because if I stop the print and",
"and then again at 215 °C with the same filament",
"letting it cool down, it extrudes fine. What is causing",
"clogged because if I stop the print and press extrude",
"it stops at the same exact point. I also tried",
"the nozzle to make sure the hotend is fit snug",
"tried M3D brand white filament. I am using CURA slicer",
"printer that printed fine for a couple of weeks and",
"for a couple of weeks and then was plagued with",
"the same exact point. I also tried M3D brand white",
"issues afterward. I've done the fixes from the forum to",
"Octoprint GCODE sender and M3D Fio. I know it is",
"print it always stops midway and usually at the same",
"with black PLA and then again at 215 °C with",
"fan, powered externally, to compensate for heat creep). This works",
"I tried printing at 200 °C with black PLA and",
"When I do a longer print it always stops midway",
"works very well for short prints and it usually finishes",
"exact point. I also tried M3D brand white filament. I",
"Micro 3D printer that printed fine for a couple of",
"creep). This works very well for short prints and it",
"then again at 215 °C with the same filament and",
"filament and it stops at the same exact point. I",
"if I stop the print and press extrude without letting",
"brand white filament. I am using CURA slicer with Octoprint",
"This works very well for short prints and it usually",
"afterward. I've done the fixes from the forum to get",
"it is not clogged because if I stop the print",
"M3D Micro 3D printer that printed fine for a couple",
"added an external fan, powered externally, to compensate for heat",
"it usually finishes successfully. When I do a longer print",
"the same filament and it stops at the same exact",
"extrude without letting it cool down, it extrudes fine. What",
"same exact point. I also tried M3D brand white filament.",
"point. I also tried M3D brand white filament. I am",
"with issues afterward. I've done the fixes from the forum",
"I do a longer print it always stops midway and",
"at 200 °C with black PLA and then again at",
"the fixes from the forum to get proper heating and",
"compensate for heat creep). This works very well for short",
"I also tried M3D brand white filament. I am using",
"down, it extrudes fine. What is causing my printer to",
"press extrude without letting it cool down, it extrudes fine.",
"foil around the nozzle to make sure the hotend is",
"couple of weeks and then was plagued with issues afterward.",
"with the same filament and it stops at the same",
"I am using CURA slicer with Octoprint GCODE sender and",
"sure the hotend is fit snug against the nozzle and",
"of weeks and then was plagued with issues afterward. I've",
"prints and it usually finishes successfully. When I do a",
"usually at the same exact point. I tried printing at",
"it extrudes fine. What is causing my printer to stop",
"from the forum to get proper heating and cooling of",
"a couple of weeks and then was plagued with issues",
"215 °C with the same filament and it stops at",
"the print and press extrude without letting it cool down,",
"again at 215 °C with the same filament and it",
"the nozzle (I've added aluminum foil around the nozzle to",
"an M3D Micro 3D printer that printed fine for a",
"using CURA slicer with Octoprint GCODE sender and M3D Fio.",
"print and press extrude without letting it cool down, it"
] |
[
"not sure what that's all about, is it cooling? Perhaps",
"one data wire (print/noprint) and the 5 V/GND wires. But",
"budget reasons). **So, I already have the 3D movement functionality.**",
"(i.e. the more advanced ones). Can somebody enlighten me or",
"But what I need now, is the printing mechanism itself.",
"it became clear to me that things are more complicated",
"wrong manuals (i.e. the more advanced ones). Can somebody enlighten",
"honest, I was so naive that I thought that I",
"5 V/GND wires. But it came to my intension that",
"ones). Can somebody enlighten me or point me to a",
"more advanced ones). Can somebody enlighten me or point me",
"Perhaps I'm always reading the wrong manuals (i.e. the more",
"than I thought. Let's skip mechanics and software, I'm just",
"became clear to me that things are more complicated than",
"the mechanics of my 3D printer myself, because I need",
"thought. Let's skip mechanics and software, I'm just interested in",
"manuals (i.e. the more advanced ones). Can somebody enlighten me",
"because I need to print parts that are really huge,",
"intension that things are way more complicated. For example, these",
"are really huge, (and for budget reasons). **So, I already",
"about, is it cooling? Perhaps I'm always reading the wrong",
"built the mechanics of my 3D printer myself, because I",
"a lot, but it became clear to me that things",
"had to buy one part with one data wire (print/noprint)",
"data wire (print/noprint) and the 5 V/GND wires. But it",
"to print parts that are really huge, (and for budget",
"attached to the print head. I'm not sure what that's",
"(print/noprint) and the 5 V/GND wires. But it came to",
"somebody explain me that? To be honest, I was so",
"me that? To be honest, I was so naive that",
"To be honest, I was so naive that I thought",
"I need now, is the printing mechanism itself. I've been",
"how the print head works. Can somebody explain me that?",
"head. I'm not sure what that's all about, is it",
"is the printing mechanism itself. I've been reading a lot,",
"me that things are more complicated than I thought. Let's",
"it came to my intension that things are way more",
"clear to me that things are more complicated than I",
"myself, because I need to print parts that are really",
"is it cooling? Perhaps I'm always reading the wrong manuals",
"complicated. For example, these RepRap printers have some kind of",
"of air tube attached to the print head. I'm not",
"these RepRap printers have some kind of air tube attached",
"for budget reasons). **So, I already have the 3D movement",
"tube attached to the print head. I'm not sure what",
"I was so naive that I thought that I just",
"head works. Can somebody explain me that? To be honest,",
"now, is the printing mechanism itself. I've been reading a",
"in how the print head works. Can somebody explain me",
"wire (print/noprint) and the 5 V/GND wires. But it came",
"the wrong manuals (i.e. the more advanced ones). Can somebody",
"printing mechanism itself. I've been reading a lot, but it",
"printers have some kind of air tube attached to the",
"need to print parts that are really huge, (and for",
"what that's all about, is it cooling? Perhaps I'm always",
"all about, is it cooling? Perhaps I'm always reading the",
"I've been reading a lot, but it became clear to",
"need now, is the printing mechanism itself. I've been reading",
"just interested in how the print head works. Can somebody",
"that things are way more complicated. For example, these RepRap",
"print head works. Can somebody explain me that? To be",
"but it became clear to me that things are more",
"Let's skip mechanics and software, I'm just interested in how",
"that are really huge, (and for budget reasons). **So, I",
"I thought. Let's skip mechanics and software, I'm just interested",
"the print head. I'm not sure what that's all about,",
"already have the 3D movement functionality.** But what I need",
"enlighten me or point me to a good starting point?",
"just had to buy one part with one data wire",
"and the 5 V/GND wires. But it came to my",
"3D movement functionality.** But what I need now, is the",
"reasons). **So, I already have the 3D movement functionality.** But",
"that? To be honest, I was so naive that I",
"so naive that I thought that I just had to",
"the 3D movement functionality.** But what I need now, is",
"(and for budget reasons). **So, I already have the 3D",
"things are more complicated than I thought. Let's skip mechanics",
"that's all about, is it cooling? Perhaps I'm always reading",
"explain me that? To be honest, I was so naive",
"I've built the mechanics of my 3D printer myself, because",
"thought that I just had to buy one part with",
"that things are more complicated than I thought. Let's skip",
"I'm just interested in how the print head works. Can",
"RepRap printers have some kind of air tube attached to",
"to me that things are more complicated than I thought.",
"For example, these RepRap printers have some kind of air",
"and software, I'm just interested in how the print head",
"that I just had to buy one part with one",
"parts that are really huge, (and for budget reasons). **So,",
"really huge, (and for budget reasons). **So, I already have",
"way more complicated. For example, these RepRap printers have some",
"kind of air tube attached to the print head. I'm",
"advanced ones). Can somebody enlighten me or point me to",
"the more advanced ones). Can somebody enlighten me or point",
"mechanism itself. I've been reading a lot, but it became",
"to the print head. I'm not sure what that's all",
"have some kind of air tube attached to the print",
"movement functionality.** But what I need now, is the printing",
"what I need now, is the printing mechanism itself. I've",
"are more complicated than I thought. Let's skip mechanics and",
"3D printer myself, because I need to print parts that",
"But it came to my intension that things are way",
"I just had to buy one part with one data",
"print head. I'm not sure what that's all about, is",
"Can somebody enlighten me or point me to a good",
"of my 3D printer myself, because I need to print",
"came to my intension that things are way more complicated.",
"wires. But it came to my intension that things are",
"been reading a lot, but it became clear to me",
"to my intension that things are way more complicated. For",
"mechanics and software, I'm just interested in how the print",
"buy one part with one data wire (print/noprint) and the",
"somebody enlighten me or point me to a good starting",
"naive that I thought that I just had to buy",
"I already have the 3D movement functionality.** But what I",
"skip mechanics and software, I'm just interested in how the",
"have the 3D movement functionality.** But what I need now,",
"print parts that are really huge, (and for budget reasons).",
"the 5 V/GND wires. But it came to my intension",
"huge, (and for budget reasons). **So, I already have the",
"works. Can somebody explain me that? To be honest, I",
"sure what that's all about, is it cooling? Perhaps I'm",
"interested in how the print head works. Can somebody explain",
"one part with one data wire (print/noprint) and the 5",
"reading a lot, but it became clear to me that",
"Can somebody explain me that? To be honest, I was",
"printer myself, because I need to print parts that are",
"my intension that things are way more complicated. For example,",
"example, these RepRap printers have some kind of air tube",
"some kind of air tube attached to the print head.",
"software, I'm just interested in how the print head works.",
"it cooling? Perhaps I'm always reading the wrong manuals (i.e.",
"V/GND wires. But it came to my intension that things",
"part with one data wire (print/noprint) and the 5 V/GND",
"was so naive that I thought that I just had",
"to buy one part with one data wire (print/noprint) and",
"I need to print parts that are really huge, (and",
"that I thought that I just had to buy one",
"more complicated than I thought. Let's skip mechanics and software,",
"mechanics of my 3D printer myself, because I need to",
"cooling? Perhaps I'm always reading the wrong manuals (i.e. the",
"are way more complicated. For example, these RepRap printers have",
"the print head works. Can somebody explain me that? To",
"always reading the wrong manuals (i.e. the more advanced ones).",
"more complicated. For example, these RepRap printers have some kind",
"things are way more complicated. For example, these RepRap printers",
"air tube attached to the print head. I'm not sure",
"I thought that I just had to buy one part",
"with one data wire (print/noprint) and the 5 V/GND wires.",
"functionality.** But what I need now, is the printing mechanism",
"the printing mechanism itself. I've been reading a lot, but",
"itself. I've been reading a lot, but it became clear",
"complicated than I thought. Let's skip mechanics and software, I'm",
"I'm always reading the wrong manuals (i.e. the more advanced",
"**So, I already have the 3D movement functionality.** But what",
"I'm not sure what that's all about, is it cooling?",
"be honest, I was so naive that I thought that",
"reading the wrong manuals (i.e. the more advanced ones). Can",
"my 3D printer myself, because I need to print parts",
"lot, but it became clear to me that things are"
] |
[
"my first printer. The only problem that I'm having is",
"degrees. Please help I've been stuck on this problem for",
"printer. The only problem that I'm having is that the",
"having is that the hotend is not getting hot enough",
"The only problem that I'm having is that the hotend",
"first printer. The only problem that I'm having is that",
"degrees celsius), the hotend getting hotter stops at 170 degrees.",
"hotend is not getting hot enough to start printing with",
"start printing with PLA (180 to 230 degrees celsius), the",
"stops at 170 degrees. Please help I've been stuck on",
"that the hotend is not getting hot enough to start",
"getting hot enough to start printing with PLA (180 to",
"the hotend getting hotter stops at 170 degrees. Please help",
"PLA (180 to 230 degrees celsius), the hotend getting hotter",
"not getting hot enough to start printing with PLA (180",
"I've been stuck on this problem for days. Thanks in",
"been stuck on this problem for days. Thanks in advance.",
"at 170 degrees. Please help I've been stuck on this",
"problem that I'm having is that the hotend is not",
"with PLA (180 to 230 degrees celsius), the hotend getting",
"finished building my first printer. The only problem that I'm",
"recently finished building my first printer. The only problem that",
"that I'm having is that the hotend is not getting",
"is that the hotend is not getting hot enough to",
"the hotend is not getting hot enough to start printing",
"getting hotter stops at 170 degrees. Please help I've been",
"170 degrees. Please help I've been stuck on this problem",
"hot enough to start printing with PLA (180 to 230",
"printing with PLA (180 to 230 degrees celsius), the hotend",
"celsius), the hotend getting hotter stops at 170 degrees. Please",
"I'm having is that the hotend is not getting hot",
"to start printing with PLA (180 to 230 degrees celsius),",
"building my first printer. The only problem that I'm having",
"is not getting hot enough to start printing with PLA",
"I recently finished building my first printer. The only problem",
"to 230 degrees celsius), the hotend getting hotter stops at",
"help I've been stuck on this problem for days. Thanks",
"hotter stops at 170 degrees. Please help I've been stuck",
"Please help I've been stuck on this problem for days.",
"(180 to 230 degrees celsius), the hotend getting hotter stops",
"230 degrees celsius), the hotend getting hotter stops at 170",
"hotend getting hotter stops at 170 degrees. Please help I've",
"enough to start printing with PLA (180 to 230 degrees",
"only problem that I'm having is that the hotend is"
] |
[
"noticed that the printer's bed is not heating anymore. The",
"The wires are connected and the heated bed has a",
"while, but then I moved the printer from place to",
"heated bed has a resistance. Did anyone else confronted with",
"the printer from place to place and after a while",
"after a while I noticed that the printer's bed is",
"anymore. The thermistor shows the temperature (room temperature), but the",
"Prusa i2 a while back. It worked for a while,",
"is not heating anymore. The thermistor shows the temperature (room",
"from place to place and after a while I noticed",
"wires are connected and the heated bed has a resistance.",
"have built a RepRap Prusa i2 a while back. It",
"RepRap Prusa i2 a while back. It worked for a",
"printer from place to place and after a while I",
"a RepRap Prusa i2 a while back. It worked for",
"built a RepRap Prusa i2 a while back. It worked",
"bed is not heating. The wires are connected and the",
"place and after a while I noticed that the printer's",
"temperature (room temperature), but the bed is not heating. The",
"but then I moved the printer from place to place",
"a while back. It worked for a while, but then",
"a while, but then I moved the printer from place",
"while I noticed that the printer's bed is not heating",
"moved the printer from place to place and after a",
"and the heated bed has a resistance. Did anyone else",
"while back. It worked for a while, but then I",
"are connected and the heated bed has a resistance. Did",
"that the printer's bed is not heating anymore. The thermistor",
"I noticed that the printer's bed is not heating anymore.",
"heating. The wires are connected and the heated bed has",
"not heating anymore. The thermistor shows the temperature (room temperature),",
"the bed is not heating. The wires are connected and",
"worked for a while, but then I moved the printer",
"and after a while I noticed that the printer's bed",
"back. It worked for a while, but then I moved",
"has a resistance. Did anyone else confronted with this? Thanks!",
"not heating. The wires are connected and the heated bed",
"heating anymore. The thermistor shows the temperature (room temperature), but",
"The thermistor shows the temperature (room temperature), but the bed",
"place to place and after a while I noticed that",
"the heated bed has a resistance. Did anyone else confronted",
"to place and after a while I noticed that the",
"I moved the printer from place to place and after",
"I have built a RepRap Prusa i2 a while back.",
"It worked for a while, but then I moved the",
"the printer's bed is not heating anymore. The thermistor shows",
"shows the temperature (room temperature), but the bed is not",
"bed has a resistance. Did anyone else confronted with this?",
"connected and the heated bed has a resistance. Did anyone",
"a while I noticed that the printer's bed is not",
"for a while, but then I moved the printer from",
"temperature), but the bed is not heating. The wires are",
"i2 a while back. It worked for a while, but",
"bed is not heating anymore. The thermistor shows the temperature",
"but the bed is not heating. The wires are connected",
"thermistor shows the temperature (room temperature), but the bed is",
"the temperature (room temperature), but the bed is not heating.",
"is not heating. The wires are connected and the heated",
"then I moved the printer from place to place and",
"(room temperature), but the bed is not heating. The wires",
"printer's bed is not heating anymore. The thermistor shows the"
] |
[
"head just snapped off. Does someone have a recommendation as",
"off without breaking the object? Would a solution just be",
"to a way to get the small filament off without",
"and see if it holds up better, or is there",
"the whole head just snapped off. Does someone have a",
"this problem where almost anything I print with a section(s)",
"print it bigger and see if it holds up better,",
"to something below it breaks when I try to pull",
"print with a section(s) that is not directly connected to",
"carefully pulling the filament from under the mouth, the whole",
"when I try to pull the small filaments meant to",
"it up during printing off. For example, I 3D-printed a",
"better, or is there something else I can do? Thanks.",
"get the small filament off without breaking the object? Would",
"small filaments meant to hold it up during printing off.",
"just snapped off. Does someone have a recommendation as to",
"my little brother, and as I was carefully pulling the",
"one](https://www.myminifactory.com/object/rayquaza-23624)) from Pokemon for my little brother, and as I",
"the filament from under the mouth, the whole head just",
"filament from under the mouth, the whole head just snapped",
"if it holds up better, or is there something else",
"it bigger and see if it holds up better, or",
"someone have a recommendation as to a way to get",
"having this problem where almost anything I print with a",
"the small filaments meant to hold it up during printing",
"a solution just be to print it bigger and see",
"recommendation as to a way to get the small filament",
"problem where almost anything I print with a section(s) that",
"to print it bigger and see if it holds up",
"the object? Would a solution just be to print it",
"be to print it bigger and see if it holds",
"for my little brother, and as I was carefully pulling",
"have a recommendation as to a way to get the",
"snapped off. Does someone have a recommendation as to a",
"pull the small filaments meant to hold it up during",
"pulling the filament from under the mouth, the whole head",
"without breaking the object? Would a solution just be to",
"under the mouth, the whole head just snapped off. Does",
"where almost anything I print with a section(s) that is",
"a Rayquaza([this one](https://www.myminifactory.com/object/rayquaza-23624)) from Pokemon for my little brother, and",
"example, I 3D-printed a Rayquaza([this one](https://www.myminifactory.com/object/rayquaza-23624)) from Pokemon for my",
"below it breaks when I try to pull the small",
"object? Would a solution just be to print it bigger",
"it breaks when I try to pull the small filaments",
"I try to pull the small filaments meant to hold",
"up during printing off. For example, I 3D-printed a Rayquaza([this",
"to get the small filament off without breaking the object?",
"a section(s) that is not directly connected to something below",
"just be to print it bigger and see if it",
"way to get the small filament off without breaking the",
"Rayquaza([this one](https://www.myminifactory.com/object/rayquaza-23624)) from Pokemon for my little brother, and as",
"meant to hold it up during printing off. For example,",
"see if it holds up better, or is there something",
"filament off without breaking the object? Would a solution just",
"to hold it up during printing off. For example, I",
"I was carefully pulling the filament from under the mouth,",
"Would a solution just be to print it bigger and",
"from under the mouth, the whole head just snapped off.",
"connected to something below it breaks when I try to",
"off. For example, I 3D-printed a Rayquaza([this one](https://www.myminifactory.com/object/rayquaza-23624)) from Pokemon",
"holds up better, or is there something else I can",
"the mouth, the whole head just snapped off. Does someone",
"filaments meant to hold it up during printing off. For",
"3D-printed a Rayquaza([this one](https://www.myminifactory.com/object/rayquaza-23624)) from Pokemon for my little brother,",
"solution just be to print it bigger and see if",
"Pokemon for my little brother, and as I was carefully",
"during printing off. For example, I 3D-printed a Rayquaza([this one](https://www.myminifactory.com/object/rayquaza-23624))",
"I print with a section(s) that is not directly connected",
"printing off. For example, I 3D-printed a Rayquaza([this one](https://www.myminifactory.com/object/rayquaza-23624)) from",
"mouth, the whole head just snapped off. Does someone have",
"little brother, and as I was carefully pulling the filament",
"with a section(s) that is not directly connected to something",
"a recommendation as to a way to get the small",
"almost anything I print with a section(s) that is not",
"something below it breaks when I try to pull the",
"was carefully pulling the filament from under the mouth, the",
"directly connected to something below it breaks when I try",
"it holds up better, or is there something else I",
"breaks when I try to pull the small filaments meant",
"section(s) that is not directly connected to something below it",
"anything I print with a section(s) that is not directly",
"off. Does someone have a recommendation as to a way",
"Does someone have a recommendation as to a way to",
"try to pull the small filaments meant to hold it",
"and as I was carefully pulling the filament from under",
"I'm having this problem where almost anything I print with",
"brother, and as I was carefully pulling the filament from",
"as I was carefully pulling the filament from under the",
"the small filament off without breaking the object? Would a",
"hold it up during printing off. For example, I 3D-printed",
"For example, I 3D-printed a Rayquaza([this one](https://www.myminifactory.com/object/rayquaza-23624)) from Pokemon for",
"is not directly connected to something below it breaks when",
"to pull the small filaments meant to hold it up",
"up better, or is there something else I can do?",
"a way to get the small filament off without breaking",
"from Pokemon for my little brother, and as I was",
"not directly connected to something below it breaks when I",
"I 3D-printed a Rayquaza([this one](https://www.myminifactory.com/object/rayquaza-23624)) from Pokemon for my little",
"whole head just snapped off. Does someone have a recommendation",
"small filament off without breaking the object? Would a solution",
"as to a way to get the small filament off",
"breaking the object? Would a solution just be to print",
"bigger and see if it holds up better, or is",
"So, I'm having this problem where almost anything I print",
"that is not directly connected to something below it breaks"
] |
[
"the 0.40, 0.60 and 0.80 nozzle but only down to",
"but only down to 60 micron with the much smaller",
"0.80 nozzle but only down to 60 micron with the",
"to 20 micron ``` That confuses me. Why can I",
"with the much smaller 0.25 nozzle? Is that a typo",
"with the 0.40, 0.60 and 0.80 nozzle but only down",
"0.40, 0.60 and 0.80 nozzle but only down to 60",
"20 micron 0.60 mm nozzle: 400 to 20 micron 0.80",
"mm nozzle: 200 to 20 micron 0.60 mm nozzle: 400",
"0.60 mm nozzle: 400 to 20 micron 0.80 mm nozzle:",
"and 0.80 nozzle but only down to 60 micron with",
"0.25 mm nozzle: 150 to 60 micron 0.40 mm nozzle:",
"micron 0.60 mm nozzle: 400 to 20 micron 0.80 mm",
"600 to 20 micron ``` That confuses me. Why can",
"can I go down to 20 micron with the 0.40,",
"they say the following ``` 0.25 mm nozzle: 150 to",
"their website they say the following ``` 0.25 mm nozzle:",
"0.25 nozzle? Is that a typo and should say 6",
"20 micron ``` That confuses me. Why can I go",
"say the following ``` 0.25 mm nozzle: 150 to 60",
"micron with the much smaller 0.25 nozzle? Is that a",
"0.80 mm nozzle: 600 to 20 micron ``` That confuses",
"nozzle: 400 to 20 micron 0.80 mm nozzle: 600 to",
"the following ``` 0.25 mm nozzle: 150 to 60 micron",
"0.40 mm nozzle: 200 to 20 micron 0.60 mm nozzle:",
"That confuses me. Why can I go down to 20",
"smaller 0.25 nozzle? Is that a typo and should say",
"down to 60 micron with the much smaller 0.25 nozzle?",
"much smaller 0.25 nozzle? Is that a typo and should",
"go down to 20 micron with the 0.40, 0.60 and",
"confuses me. Why can I go down to 20 micron",
"400 to 20 micron 0.80 mm nozzle: 600 to 20",
"to 20 micron 0.80 mm nozzle: 600 to 20 micron",
"0.60 and 0.80 nozzle but only down to 60 micron",
"nozzle: 150 to 60 micron 0.40 mm nozzle: 200 to",
"only down to 60 micron with the much smaller 0.25",
"micron ``` That confuses me. Why can I go down",
"60 micron 0.40 mm nozzle: 200 to 20 micron 0.60",
"the much smaller 0.25 nozzle? Is that a typo and",
"``` That confuses me. Why can I go down to",
"20 micron 0.80 mm nozzle: 600 to 20 micron ```",
"micron 0.80 mm nozzle: 600 to 20 micron ``` That",
"to 20 micron 0.60 mm nozzle: 400 to 20 micron",
"website they say the following ``` 0.25 mm nozzle: 150",
"micron 0.40 mm nozzle: 200 to 20 micron 0.60 mm",
"down to 20 micron with the 0.40, 0.60 and 0.80",
"nozzle? Is that a typo and should say 6 micron?",
"200 to 20 micron 0.60 mm nozzle: 400 to 20",
"micron with the 0.40, 0.60 and 0.80 nozzle but only",
"to 60 micron 0.40 mm nozzle: 200 to 20 micron",
"60 micron with the much smaller 0.25 nozzle? Is that",
"Why can I go down to 20 micron with the",
"On their website they say the following ``` 0.25 mm",
"``` 0.25 mm nozzle: 150 to 60 micron 0.40 mm",
"150 to 60 micron 0.40 mm nozzle: 200 to 20",
"I go down to 20 micron with the 0.40, 0.60",
"me. Why can I go down to 20 micron with",
"20 micron with the 0.40, 0.60 and 0.80 nozzle but",
"nozzle but only down to 60 micron with the much",
"to 60 micron with the much smaller 0.25 nozzle? Is",
"nozzle: 200 to 20 micron 0.60 mm nozzle: 400 to",
"mm nozzle: 600 to 20 micron ``` That confuses me.",
"nozzle: 600 to 20 micron ``` That confuses me. Why",
"mm nozzle: 400 to 20 micron 0.80 mm nozzle: 600",
"mm nozzle: 150 to 60 micron 0.40 mm nozzle: 200",
"to 20 micron with the 0.40, 0.60 and 0.80 nozzle",
"following ``` 0.25 mm nozzle: 150 to 60 micron 0.40"
] |
[
"the paper. It would probably need to be able to",
"ones made from [PLA](https://3dprint.com/110918/3d-printed-stamp-collection/) and [ABS](http://www.thingiverse.com/thing:3669). Logically, though, a TPU",
"some filaments, STL files, and accessories I will need ready",
"is convinced, however, that they will be too rigid to",
"probably need to be able to be sanded or smoothed",
"accessories I will need ready in advance so I can",
"make good, even contact with the paper. It would probably",
"quick google search showed ones made from [PLA](https://3dprint.com/110918/3d-printed-stamp-collection/) and [ABS](http://www.thingiverse.com/thing:3669).",
"hold ink and make good, even contact with the paper.",
"advance so I can rapidly learn how to use it.",
"to hold ink and make good, even contact with the",
"custom stamps for her to use on paper (scrap books,",
"to get some filaments, STL files, and accessories I will",
"to use an FFM 3d printer to make custom stamps",
"good, even contact with the paper. It would probably need",
"that they will be too rigid to make good stamps.",
"her concerns. A good quality stamp needs to hold ink",
"use an FFM 3d printer to make custom stamps for",
"ready in advance so I can rapidly learn how to",
"her to use on paper (scrap books, letters, etc.). She",
"etc.). She is convinced, however, that they will be too",
"with the paper. It would probably need to be able",
"make custom stamps for her to use on paper (scrap",
"will be too rigid to make good stamps. A quick",
"ink and make good, even contact with the paper. It",
"wants me to use an FFM 3d printer to make",
"from [PLA](https://3dprint.com/110918/3d-printed-stamp-collection/) and [ABS](http://www.thingiverse.com/thing:3669). Logically, though, a TPU or similar",
"or so and am trying to get some filaments, STL",
"It would probably need to be able to be sanded",
"STL files, and accessories I will need ready in advance",
"Logically, though, a TPU or similar would address her concerns.",
"sanded or smoothed in some way. I am supposed to",
"and am trying to get some filaments, STL files, and",
"showed ones made from [PLA](https://3dprint.com/110918/3d-printed-stamp-collection/) and [ABS](http://www.thingiverse.com/thing:3669). Logically, though, a",
"stamps for her to use on paper (scrap books, letters,",
"files, and accessories I will need ready in advance so",
"printer next week or so and am trying to get",
"3d printer to make custom stamps for her to use",
"next week or so and am trying to get some",
"[ABS](http://www.thingiverse.com/thing:3669). Logically, though, a TPU or similar would address her",
"to receive my printer next week or so and am",
"wife wants me to use an FFM 3d printer to",
"however, that they will be too rigid to make good",
"She is convinced, however, that they will be too rigid",
"paper (scrap books, letters, etc.). She is convinced, however, that",
"A quick google search showed ones made from [PLA](https://3dprint.com/110918/3d-printed-stamp-collection/) and",
"way. I am supposed to receive my printer next week",
"an FFM 3d printer to make custom stamps for her",
"so and am trying to get some filaments, STL files,",
"to be sanded or smoothed in some way. I am",
"use on paper (scrap books, letters, etc.). She is convinced,",
"(scrap books, letters, etc.). She is convinced, however, that they",
"search showed ones made from [PLA](https://3dprint.com/110918/3d-printed-stamp-collection/) and [ABS](http://www.thingiverse.com/thing:3669). Logically, though,",
"am trying to get some filaments, STL files, and accessories",
"concerns. A good quality stamp needs to hold ink and",
"or smoothed in some way. I am supposed to receive",
"contact with the paper. It would probably need to be",
"I will need ready in advance so I can rapidly",
"some way. I am supposed to receive my printer next",
"or similar would address her concerns. A good quality stamp",
"address her concerns. A good quality stamp needs to hold",
"me to use an FFM 3d printer to make custom",
"to make custom stamps for her to use on paper",
"made from [PLA](https://3dprint.com/110918/3d-printed-stamp-collection/) and [ABS](http://www.thingiverse.com/thing:3669). Logically, though, a TPU or",
"in advance so I can rapidly learn how to use",
"FFM 3d printer to make custom stamps for her to",
"for her to use on paper (scrap books, letters, etc.).",
"paper. It would probably need to be able to be",
"filaments, STL files, and accessories I will need ready in",
"on paper (scrap books, letters, etc.). She is convinced, however,",
"good stamps. A quick google search showed ones made from",
"rigid to make good stamps. A quick google search showed",
"quality stamp needs to hold ink and make good, even",
"need ready in advance so I can rapidly learn how",
"My wife wants me to use an FFM 3d printer",
"and accessories I will need ready in advance so I",
"week or so and am trying to get some filaments,",
"similar would address her concerns. A good quality stamp needs",
"to make good stamps. A quick google search showed ones",
"they will be too rigid to make good stamps. A",
"good quality stamp needs to hold ink and make good,",
"too rigid to make good stamps. A quick google search",
"supposed to receive my printer next week or so and",
"stamps. A quick google search showed ones made from [PLA](https://3dprint.com/110918/3d-printed-stamp-collection/)",
"able to be sanded or smoothed in some way. I",
"would address her concerns. A good quality stamp needs to",
"TPU or similar would address her concerns. A good quality",
"receive my printer next week or so and am trying",
"even contact with the paper. It would probably need to",
"and [ABS](http://www.thingiverse.com/thing:3669). Logically, though, a TPU or similar would address",
"to use on paper (scrap books, letters, etc.). She is",
"in some way. I am supposed to receive my printer",
"be sanded or smoothed in some way. I am supposed",
"printer to make custom stamps for her to use on",
"[PLA](https://3dprint.com/110918/3d-printed-stamp-collection/) and [ABS](http://www.thingiverse.com/thing:3669). Logically, though, a TPU or similar would",
"though, a TPU or similar would address her concerns. A",
"get some filaments, STL files, and accessories I will need",
"to be able to be sanded or smoothed in some",
"google search showed ones made from [PLA](https://3dprint.com/110918/3d-printed-stamp-collection/) and [ABS](http://www.thingiverse.com/thing:3669). Logically,",
"be able to be sanded or smoothed in some way.",
"A good quality stamp needs to hold ink and make",
"a TPU or similar would address her concerns. A good",
"convinced, however, that they will be too rigid to make",
"am supposed to receive my printer next week or so",
"be too rigid to make good stamps. A quick google",
"trying to get some filaments, STL files, and accessories I",
"books, letters, etc.). She is convinced, however, that they will",
"needs to hold ink and make good, even contact with",
"smoothed in some way. I am supposed to receive my",
"and make good, even contact with the paper. It would",
"I am supposed to receive my printer next week or",
"my printer next week or so and am trying to",
"stamp needs to hold ink and make good, even contact",
"need to be able to be sanded or smoothed in",
"letters, etc.). She is convinced, however, that they will be",
"would probably need to be able to be sanded or",
"make good stamps. A quick google search showed ones made",
"will need ready in advance so I can rapidly learn"
] |
[
"similar temperatures? For example, PLA and PLA composites like ColorFabb",
"temperatures? For example, PLA and PLA composites like ColorFabb Woodfill",
"Woodfill filament. Should I use a separate nozzle for that?",
"about filament types that use similar temperatures? For example, PLA",
"I should use different nozzles for filaments that use vastly",
"ColorFabb Woodfill filament. Should I use a separate nozzle for",
"that use similar temperatures? For example, PLA and PLA composites",
"I know I should use different nozzles for filaments that",
"use different nozzles for filaments that use vastly different temperatures",
"types that use similar temperatures? For example, PLA and PLA",
"should use different nozzles for filaments that use vastly different",
"use vastly different temperatures but what about filament types that",
"composites like ColorFabb Woodfill filament. Should I use a separate",
"PLA composites like ColorFabb Woodfill filament. Should I use a",
"but what about filament types that use similar temperatures? For",
"PLA and PLA composites like ColorFabb Woodfill filament. Should I",
"nozzles for filaments that use vastly different temperatures but what",
"filaments that use vastly different temperatures but what about filament",
"vastly different temperatures but what about filament types that use",
"like ColorFabb Woodfill filament. Should I use a separate nozzle",
"For example, PLA and PLA composites like ColorFabb Woodfill filament.",
"use similar temperatures? For example, PLA and PLA composites like",
"temperatures but what about filament types that use similar temperatures?",
"that use vastly different temperatures but what about filament types",
"filament types that use similar temperatures? For example, PLA and",
"what about filament types that use similar temperatures? For example,",
"different nozzles for filaments that use vastly different temperatures but",
"different temperatures but what about filament types that use similar",
"and PLA composites like ColorFabb Woodfill filament. Should I use",
"example, PLA and PLA composites like ColorFabb Woodfill filament. Should",
"know I should use different nozzles for filaments that use",
"for filaments that use vastly different temperatures but what about"
] |
[
"I have checked the correctness of the movement on Z",
"printing PLA on a cold bed at 180 °C without",
"on Z using the manual controls and there are no",
"and there are no issues. I played a bit with",
"have checked the correctness of the movement on Z using",
"printer, it is a Prusa/Mendel type. When I print a",
"at 180 °C without any other particular defect. I would",
"defect. I would appreciate some direction on how to solve",
"a 20 mm cube, X and Y are correct, Z",
"the correctness of the movement on Z using the manual",
"I have a 0.4 mm nozzle, setting the layer height",
"controls and there are no issues. I played a bit",
"thickness, I have a 0.4 mm nozzle, setting the layer",
"a weird problem with my old 3D printer, it is",
"17 mm. I have checked the correctness of the movement",
"20 mm cube, X and Y are correct, Z is",
"would appreciate some direction on how to solve such problem.",
"of the movement on Z using the manual controls and",
"I have a weird problem with my old 3D printer,",
"using the manual controls and there are no issues. I",
"changes in the result. I am printing PLA on a",
"When I print a 20 mm cube, X and Y",
"PLA on a cold bed at 180 °C without any",
"3D printer, it is a Prusa/Mendel type. When I print",
"a cold bed at 180 °C without any other particular",
"the result. I am printing PLA on a cold bed",
"is a Prusa/Mendel type. When I print a 20 mm",
"to 0.12 mm (normally is on 0.16 mm) but no",
"Z is resulting 16 to 17 mm. I have checked",
"on 0.16 mm) but no changes in the result. I",
"mm. I have checked the correctness of the movement on",
"I am printing PLA on a cold bed at 180",
"any other particular defect. I would appreciate some direction on",
"the layer thickness, I have a 0.4 mm nozzle, setting",
"mm) but no changes in the result. I am printing",
"there are no issues. I played a bit with the",
"Y are correct, Z is resulting 16 to 17 mm.",
"Z using the manual controls and there are no issues.",
"the manual controls and there are no issues. I played",
"manual controls and there are no issues. I played a",
"nozzle, setting the layer height to 0.12 mm (normally is",
"result. I am printing PLA on a cold bed at",
"Prusa/Mendel type. When I print a 20 mm cube, X",
"my old 3D printer, it is a Prusa/Mendel type. When",
"is resulting 16 to 17 mm. I have checked the",
"problem with my old 3D printer, it is a Prusa/Mendel",
"0.12 mm (normally is on 0.16 mm) but no changes",
"without any other particular defect. I would appreciate some direction",
"the layer height to 0.12 mm (normally is on 0.16",
"with the layer thickness, I have a 0.4 mm nozzle,",
"in the result. I am printing PLA on a cold",
"am printing PLA on a cold bed at 180 °C",
"mm cube, X and Y are correct, Z is resulting",
"I played a bit with the layer thickness, I have",
"no issues. I played a bit with the layer thickness,",
"0.16 mm) but no changes in the result. I am",
"are correct, Z is resulting 16 to 17 mm. I",
"a 0.4 mm nozzle, setting the layer height to 0.12",
"played a bit with the layer thickness, I have a",
"it is a Prusa/Mendel type. When I print a 20",
"and Y are correct, Z is resulting 16 to 17",
"height to 0.12 mm (normally is on 0.16 mm) but",
"16 to 17 mm. I have checked the correctness of",
"setting the layer height to 0.12 mm (normally is on",
"a bit with the layer thickness, I have a 0.4",
"but no changes in the result. I am printing PLA",
"old 3D printer, it is a Prusa/Mendel type. When I",
"180 °C without any other particular defect. I would appreciate",
"other particular defect. I would appreciate some direction on how",
"weird problem with my old 3D printer, it is a",
"movement on Z using the manual controls and there are",
"are no issues. I played a bit with the layer",
"bit with the layer thickness, I have a 0.4 mm",
"have a weird problem with my old 3D printer, it",
"issues. I played a bit with the layer thickness, I",
"correct, Z is resulting 16 to 17 mm. I have",
"cube, X and Y are correct, Z is resulting 16",
"I print a 20 mm cube, X and Y are",
"type. When I print a 20 mm cube, X and",
"the movement on Z using the manual controls and there",
"(normally is on 0.16 mm) but no changes in the",
"mm (normally is on 0.16 mm) but no changes in",
"0.4 mm nozzle, setting the layer height to 0.12 mm",
"no changes in the result. I am printing PLA on",
"X and Y are correct, Z is resulting 16 to",
"layer thickness, I have a 0.4 mm nozzle, setting the",
"°C without any other particular defect. I would appreciate some",
"to 17 mm. I have checked the correctness of the",
"cold bed at 180 °C without any other particular defect.",
"particular defect. I would appreciate some direction on how to",
"mm nozzle, setting the layer height to 0.12 mm (normally",
"on a cold bed at 180 °C without any other",
"checked the correctness of the movement on Z using the",
"correctness of the movement on Z using the manual controls",
"a Prusa/Mendel type. When I print a 20 mm cube,",
"I would appreciate some direction on how to solve such",
"layer height to 0.12 mm (normally is on 0.16 mm)",
"have a 0.4 mm nozzle, setting the layer height to",
"with my old 3D printer, it is a Prusa/Mendel type.",
"is on 0.16 mm) but no changes in the result.",
"bed at 180 °C without any other particular defect. I",
"resulting 16 to 17 mm. I have checked the correctness",
"print a 20 mm cube, X and Y are correct,"
] |
[
"that seems to improve water resistance of 3D printed items",
"joint to close it. I searched for different materials, however,",
"a front face removable, with screw and sealing joint to",
"things ? I am specially interested in carbon fiber reinforced",
"printed items [here](http://www.nanovia-technologies.com/...mperm-f10-ft-tds.pdf), which might be a starting point) Does",
"to make hermetic things ? I am specially interested in",
"if making an hermetic box is feasible using 3D printer.",
"point) Does anyone have experienced to make hermetic things ?",
"be a cube with a front face removable, with screw",
"for different materials, however, none talks about hermiticity. (However, I",
"improve water resistance of 3D printed items [here](http://www.nanovia-technologies.com/...mperm-f10-ft-tds.pdf), which might",
"have experienced to make hermetic things ? I am specially",
"about hermiticity. (However, I found a product that seems to",
"a product that seems to improve water resistance of 3D",
"with screw and sealing joint to close it. I searched",
"removable, with screw and sealing joint to close it. I",
"wondering if making an hermetic box is feasible using 3D",
"I am wondering if making an hermetic box is feasible",
"box is feasible using 3D printer. The box would be",
"and sealing joint to close it. I searched for different",
"would be a cube with a front face removable, with",
"cube with a front face removable, with screw and sealing",
"to close it. I searched for different materials, however, none",
"however, none talks about hermiticity. (However, I found a product",
"talks about hermiticity. (However, I found a product that seems",
"feasible using 3D printer. The box would be a cube",
"a starting point) Does anyone have experienced to make hermetic",
"different materials, however, none talks about hermiticity. (However, I found",
"to improve water resistance of 3D printed items [here](http://www.nanovia-technologies.com/...mperm-f10-ft-tds.pdf), which",
"which might be a starting point) Does anyone have experienced",
"? I am specially interested in carbon fiber reinforced materials.",
"starting point) Does anyone have experienced to make hermetic things",
"hermetic things ? I am specially interested in carbon fiber",
"hermiticity. (However, I found a product that seems to improve",
"(However, I found a product that seems to improve water",
"of 3D printed items [here](http://www.nanovia-technologies.com/...mperm-f10-ft-tds.pdf), which might be a starting",
"using 3D printer. The box would be a cube with",
"making an hermetic box is feasible using 3D printer. The",
"items [here](http://www.nanovia-technologies.com/...mperm-f10-ft-tds.pdf), which might be a starting point) Does anyone",
"[here](http://www.nanovia-technologies.com/...mperm-f10-ft-tds.pdf), which might be a starting point) Does anyone have",
"be a starting point) Does anyone have experienced to make",
"Does anyone have experienced to make hermetic things ? I",
"make hermetic things ? I am specially interested in carbon",
"seems to improve water resistance of 3D printed items [here](http://www.nanovia-technologies.com/...mperm-f10-ft-tds.pdf),",
"sealing joint to close it. I searched for different materials,",
"The box would be a cube with a front face",
"might be a starting point) Does anyone have experienced to",
"none talks about hermiticity. (However, I found a product that",
"searched for different materials, however, none talks about hermiticity. (However,",
"a cube with a front face removable, with screw and",
"front face removable, with screw and sealing joint to close",
"experienced to make hermetic things ? I am specially interested",
"face removable, with screw and sealing joint to close it.",
"3D printed items [here](http://www.nanovia-technologies.com/...mperm-f10-ft-tds.pdf), which might be a starting point)",
"printer. The box would be a cube with a front",
"resistance of 3D printed items [here](http://www.nanovia-technologies.com/...mperm-f10-ft-tds.pdf), which might be a",
"box would be a cube with a front face removable,",
"materials, however, none talks about hermiticity. (However, I found a",
"I searched for different materials, however, none talks about hermiticity.",
"I found a product that seems to improve water resistance",
"screw and sealing joint to close it. I searched for",
"is feasible using 3D printer. The box would be a",
"it. I searched for different materials, however, none talks about",
"product that seems to improve water resistance of 3D printed",
"anyone have experienced to make hermetic things ? I am",
"close it. I searched for different materials, however, none talks",
"am wondering if making an hermetic box is feasible using",
"hermetic box is feasible using 3D printer. The box would",
"3D printer. The box would be a cube with a",
"found a product that seems to improve water resistance of",
"water resistance of 3D printed items [here](http://www.nanovia-technologies.com/...mperm-f10-ft-tds.pdf), which might be",
"with a front face removable, with screw and sealing joint",
"an hermetic box is feasible using 3D printer. The box"
] |
[
"gaps still appear. Any ideas what else I can try?",
"but the gaps still appear. Any ideas what else I",
"tried increasing the number of top layers but the gaps",
"and gaps appearing. I've tried increasing the number of top",
"going. The problem lies with the top layer and gaps",
"trying to print with Laybrick and for the most part",
"I'm trying to print with Laybrick and for the most",
"the top layer and gaps appearing. I've tried increasing the",
"part it is going. The problem lies with the top",
"layers but the gaps still appear. Any ideas what else",
"still appear. Any ideas what else I can try? I'm",
"print with Laybrick and for the most part it is",
"most part it is going. The problem lies with the",
"is going. The problem lies with the top layer and",
"with the top layer and gaps appearing. I've tried increasing",
"the gaps still appear. Any ideas what else I can",
"number of top layers but the gaps still appear. Any",
"top layer and gaps appearing. I've tried increasing the number",
"lies with the top layer and gaps appearing. I've tried",
"increasing the number of top layers but the gaps still",
"it is going. The problem lies with the top layer",
"and for the most part it is going. The problem",
"appear. Any ideas what else I can try? I'm using",
"gaps appearing. I've tried increasing the number of top layers",
"with Laybrick and for the most part it is going.",
"for the most part it is going. The problem lies",
"to print with Laybrick and for the most part it",
"The problem lies with the top layer and gaps appearing.",
"top layers but the gaps still appear. Any ideas what",
"appearing. I've tried increasing the number of top layers but",
"Laybrick and for the most part it is going. The",
"ideas what else I can try? I'm using Simplify3d. [](https://i.stack.imgur.com/Y05dR.jpg)",
"Any ideas what else I can try? I'm using Simplify3d.",
"problem lies with the top layer and gaps appearing. I've",
"the most part it is going. The problem lies with",
"the number of top layers but the gaps still appear.",
"layer and gaps appearing. I've tried increasing the number of",
"of top layers but the gaps still appear. Any ideas",
"I've tried increasing the number of top layers but the"
] |
[
"baby who will gnaw on it. To me the safety",
"it. To me the safety concerns here are much larger",
"applications. What steps should be taken to ensure such a",
"about safety associated with such a product in the hands",
"to ensure such a print is safe for use? This",
"me the safety concerns here are much larger than for",
"for use? This includes: filament selection, pea material selection, wall",
"a baby who will gnaw on it. To me the",
"thingiverse. I am, however, concerned about safety associated with such",
"on thingiverse. I am, however, concerned about safety associated with",
"handling applications. What steps should be taken to ensure such",
"current thoughts are as follows: \"food grade PLA\", dried peas,",
"What steps should be taken to ensure such a print",
"filament selection, pea material selection, wall thickness, smoothing, construction, etc.",
"will gnaw on it. To me the safety concerns here",
"much larger than for most food handling applications. What steps",
"I've a friend who is expecting. There are several adorable",
"hands of a baby who will gnaw on it. To",
"expecting. There are several adorable weapon themed rattles on thingiverse.",
"several adorable weapon themed rattles on thingiverse. I am, however,",
"taken to ensure such a print is safe for use?",
"safety concerns here are much larger than for most food",
"My current thoughts are as follows: \"food grade PLA\", dried",
"This includes: filament selection, pea material selection, wall thickness, smoothing,",
"themed rattles on thingiverse. I am, however, concerned about safety",
"use? This includes: filament selection, pea material selection, wall thickness,",
"includes: filament selection, pea material selection, wall thickness, smoothing, construction,",
"in the hands of a baby who will gnaw on",
"material selection, wall thickness, smoothing, construction, etc. My current thoughts",
"safe for use? This includes: filament selection, pea material selection,",
"smoothing, construction, etc. My current thoughts are as follows: \"food",
"safety associated with such a product in the hands of",
"thoughts are as follows: \"food grade PLA\", dried peas, sanding,",
"who will gnaw on it. To me the safety concerns",
"is expecting. There are several adorable weapon themed rattles on",
"construction, etc. My current thoughts are as follows: \"food grade",
"selection, wall thickness, smoothing, construction, etc. My current thoughts are",
"are several adorable weapon themed rattles on thingiverse. I am,",
"who is expecting. There are several adorable weapon themed rattles",
"product in the hands of a baby who will gnaw",
"on it. To me the safety concerns here are much",
"wall thickness, smoothing, construction, etc. My current thoughts are as",
"should be taken to ensure such a print is safe",
"rattles on thingiverse. I am, however, concerned about safety associated",
"are much larger than for most food handling applications. What",
"ensure such a print is safe for use? This includes:",
"is safe for use? This includes: filament selection, pea material",
"a print is safe for use? This includes: filament selection,",
"steps should be taken to ensure such a print is",
"the safety concerns here are much larger than for most",
"however, concerned about safety associated with such a product in",
"here are much larger than for most food handling applications.",
"There are several adorable weapon themed rattles on thingiverse. I",
"selection, pea material selection, wall thickness, smoothing, construction, etc. My",
"gnaw on it. To me the safety concerns here are",
"friend who is expecting. There are several adorable weapon themed",
"I am, however, concerned about safety associated with such a",
"be taken to ensure such a print is safe for",
"etc. My current thoughts are as follows: \"food grade PLA\",",
"follows: \"food grade PLA\", dried peas, sanding, and single piece",
"a friend who is expecting. There are several adorable weapon",
"are as follows: \"food grade PLA\", dried peas, sanding, and",
"print is safe for use? This includes: filament selection, pea",
"am, however, concerned about safety associated with such a product",
"larger than for most food handling applications. What steps should",
"food handling applications. What steps should be taken to ensure",
"pea material selection, wall thickness, smoothing, construction, etc. My current",
"concerns here are much larger than for most food handling",
"such a print is safe for use? This includes: filament",
"for most food handling applications. What steps should be taken",
"concerned about safety associated with such a product in the",
"adorable weapon themed rattles on thingiverse. I am, however, concerned",
"\"food grade PLA\", dried peas, sanding, and single piece construction",
"weapon themed rattles on thingiverse. I am, however, concerned about",
"such a product in the hands of a baby who",
"a product in the hands of a baby who will",
"associated with such a product in the hands of a",
"with such a product in the hands of a baby",
"as follows: \"food grade PLA\", dried peas, sanding, and single",
"of a baby who will gnaw on it. To me",
"To me the safety concerns here are much larger than",
"most food handling applications. What steps should be taken to",
"the hands of a baby who will gnaw on it.",
"than for most food handling applications. What steps should be",
"thickness, smoothing, construction, etc. My current thoughts are as follows:"
] |
[
"key and it's identical. Is there something I can do",
"it to the real key and it's identical. Is there",
"work and not rip? Is there some filament that I",
"I put it in the lock the pins move but,",
"in the lock the pins move but, when I go",
"it the key rips and the lock doesn't turn. I",
"the real key and it's identical. Is there something I",
"turn it the key rips and the lock doesn't turn.",
"that I can print it out of? I used ABS.",
"[](https://i.stack.imgur.com/8sfuT.jpg) [](https://i.stack.imgur.com/XoGY3.jpg) When I",
"some filament that I can print it out of? I",
"to make it work and not rip? Is there some",
"[](https://i.stack.imgur.com/XoGY3.jpg) When I put it in the",
"the pins move but, when I go to turn it",
"move but, when I go to turn it the key",
"it's identical. Is there something I can do to make",
"there something I can do to make it work and",
"rips and the lock doesn't turn. I compared it to",
"the key rips and the lock doesn't turn. I compared",
"key. [](https://i.stack.imgur.com/8sfuT.jpg) [](https://i.stack.imgur.com/XoGY3.jpg) When",
"real key and it's identical. Is there something I can",
"lock the pins move but, when I go to turn",
"description here](https://i.stack.imgur.com/XoGY3.jpg)](https://i.stack.imgur.com/XoGY3.jpg) When I put it in the lock the",
"not rip? Is there some filament that I can print",
"filament that I can print it out of? I used",
"a key. [](https://i.stack.imgur.com/8sfuT.jpg) [](https://i.stack.imgur.com/XoGY3.jpg)",
"something I can do to make it work and not",
"and not rip? Is there some filament that I can",
"Is there some filament that I can print it out",
"lock doesn't turn. I compared it to the real key",
"Is there something I can do to make it work",
"do to make it work and not rip? Is there",
"here](https://i.stack.imgur.com/8sfuT.jpg)](https://i.stack.imgur.com/8sfuT.jpg) [](https://i.stack.imgur.com/XoGY3.jpg) When I put it in",
"the lock the pins move but, when I go to",
"doesn't turn. I compared it to the real key and",
"I can do to make it work and not rip?",
"rip? Is there some filament that I can print it",
"and it's identical. Is there something I can do to",
"identical. Is there something I can do to make it",
"put it in the lock the pins move but, when",
"description here](https://i.stack.imgur.com/8sfuT.jpg)](https://i.stack.imgur.com/8sfuT.jpg) [](https://i.stack.imgur.com/XoGY3.jpg) When I put it",
"and the lock doesn't turn. I compared it to the",
"When I put it in the lock the pins move",
"it work and not rip? Is there some filament that",
"when I go to turn it the key rips and",
"it in the lock the pins move but, when I",
"I compared it to the real key and it's identical.",
"image description here](https://i.stack.imgur.com/8sfuT.jpg)](https://i.stack.imgur.com/8sfuT.jpg) [](https://i.stack.imgur.com/XoGY3.jpg) When I put",
"the lock doesn't turn. I compared it to the real",
"to the real key and it's identical. Is there something",
"key rips and the lock doesn't turn. I compared it",
"3d-printed a key. [](https://i.stack.imgur.com/8sfuT.jpg) [](https://i.stack.imgur.com/8sfuT.jpg) [](https://i.stack.imgur.com/XoGY3.jpg) When I put it in the lock the pins",
"I go to turn it the key rips and the",
"but, when I go to turn it the key rips",
"go to turn it the key rips and the lock",
"make it work and not rip? Is there some filament",
"image description here](https://i.stack.imgur.com/XoGY3.jpg)](https://i.stack.imgur.com/XoGY3.jpg) When I put it in the lock",
"pins move but, when I go to turn it the",
"there some filament that I can print it out of?"
] |