Split (1)

train · 10.4M rows

ngram listlengths 0 9.89k
[ "Auto Mesh Bed Leveling enabled on your printer, it's not", "it's not possible to continue a failed print, is it?", "Bed Leveling enabled on your printer, it's not possible to", "your printer, it's not possible to continue a failed print,", "have Auto Mesh Bed Leveling enabled on your printer, it's", "printer, it's not possible to continue a failed print, is", "enabled on your printer, it's not possible to continue a", "you have Auto Mesh Bed Leveling enabled on your printer,", "on your printer, it's not possible to continue a failed", "Mesh Bed Leveling enabled on your printer, it's not possible", "When you have Auto Mesh Bed Leveling enabled on your", "Leveling enabled on your printer, it's not possible to continue" ]
[ "personal mechanical and software issues. Our lab is seeking a", "to tinker with the printer and modify it to my", "software issues. Our lab is seeking a printer that is", "we have funding for a higher quality printer if there", "USD * 5000 USD * 8000 USD or more I", "doing experiments. I have overcome many common 3D printing issues,", "necessary to do when becoming proficient in this technique. However", "we have been using the FABtotum personal fabricator for several", "issues, which I find necessary to do when becoming proficient", "I am saying that we are willing to pay more", "and has set us back from doing experiments. I have", "work in a biological laboratory where we have been using", "nice). This is what we figured we were getting with", "FDM, SLA, and even 3D scanning is nice). This is", "time, however we have funding for a higher quality printer", "my needs, but unfortunately our lab is strapped for time,", "good, however not flawless, and has set us back from", "you anyone recommend a printer fitting these needs in these", "overcome many common 3D printing issues, which I find necessary", "3000 USD * 5000 USD * 8000 USD or more", "modify it to my needs, but unfortunately our lab is", "figured we were getting with the FABtotum, but as I", "that is more reliable, can produce parts relatively quick, good", "USD * 8000 USD or more I know price doesn't", "more if that is where the quality lies. For example,", "3D printing issues, which I find necessary to do when", "FABtotum, but as I mentioned it has produced setbacks. Now", "for time, however we have funding for a higher quality", "is good, however not flawless, and has set us back", "a biological laboratory where we have been using the FABtotum", "biological laboratory where we have been using the FABtotum personal", "machine is good, however not flawless, and has set us", "and BCN3D sigma printers which seem quite nice. Any opinions", "produced setbacks. Now I would love to tinker with the", "but as I mentioned it has produced setbacks. Now I", "* 5000 USD * 8000 USD or more I know", "3D scanning is nice). This is what we figured we", "we were getting with the FABtotum, but as I mentioned", "with the printer and modify it to my needs, but", "these needs in these budget categories?: * 3000 USD ", "we are willing to pay more if that is where", "to pay more if that is where the quality lies.", "using the FABtotum personal fabricator for several months now. The", "2, Ultimaker, and BCN3D sigma printers which seem quite nice.", "willing to pay more if that is where the quality", "I find necessary to do when becoming proficient in this", "mentioned it has produced setbacks. Now I would love to", "Ultimaker, and BCN3D sigma printers which seem quite nice. Any", "lab is strapped for time, however we have funding for", "it has multiple modes (i.e FDM, SLA, and even 3D", "in these budget categories?: 3000 USD * 5000 USD", "more I know price doesn't equate quality, but I am", "these budget categories?: * 3000 USD * 5000 USD ", "quality printer if there is one. Can you anyone recommend", "know price doesn't equate quality, but I am saying that", "do when becoming proficient in this technique. However the printer", "produce parts relatively quick, good resolution, and it is nice", "the printer has also had its own personal mechanical and", "and even 3D scanning is nice). This is what we", "has set us back from doing experiments. I have overcome", "us back from doing experiments. I have overcome many common", "is nice if it has multiple modes (i.e FDM, SLA,", "experiments. I have overcome many common 3D printing issues, which", "sigma printers which seem quite nice. Any opinions are very", "The machine is good, however not flawless, and has set", "with the FABtotum, but as I mentioned it has produced", "pay more if that is where the quality lies. For", "fitting these needs in these budget categories?: 3000 USD", "relatively quick, good resolution, and it is nice if it", "common 3D printing issues, which I find necessary to do", "the Form 2, Ultimaker, and BCN3D sigma printers which seem", "Our lab is seeking a printer that is more reliable,", "I have come across the Form 2, Ultimaker, and BCN3D", "I would love to tinker with the printer and modify", "quick, good resolution, and it is nice if it has", "is where the quality lies. For example, I have come", "doesn't equate quality, but I am saying that we are", "proficient in this technique. However the printer has also had", "getting with the FABtotum, but as I mentioned it has", "it is nice if it has multiple modes (i.e FDM,", "have come across the Form 2, Ultimaker, and BCN3D sigma", "tinker with the printer and modify it to my needs,", "I mentioned it has produced setbacks. Now I would love", "I have overcome many common 3D printing issues, which I", "have overcome many common 3D printing issues, which I find", "its own personal mechanical and software issues. Our lab is", "8000 USD or more I know price doesn't equate quality,", "good resolution, and it is nice if it has multiple", "Can you anyone recommend a printer fitting these needs in", "is what we figured we were getting with the FABtotum,", "For example, I have come across the Form 2, Ultimaker,", "multiple modes (i.e FDM, SLA, and even 3D scanning is", "lab is seeking a printer that is more reliable, can", "higher quality printer if there is one. Can you anyone", "this technique. However the printer has also had its own", "printer has also had its own personal mechanical and software", "quality, but I am saying that we are willing to", "come across the Form 2, Ultimaker, and BCN3D sigma printers", "* 3000 USD * 5000 USD * 8000 USD or", "* 8000 USD or more I know price doesn't equate", "is one. Can you anyone recommend a printer fitting these", "where the quality lies. For example, I have come across", "set us back from doing experiments. I have overcome many", "unfortunately our lab is strapped for time, however we have", "where we have been using the FABtotum personal fabricator for", "across the Form 2, Ultimaker, and BCN3D sigma printers which", "own personal mechanical and software issues. Our lab is seeking", "printer that is more reliable, can produce parts relatively quick,", "been using the FABtotum personal fabricator for several months now.", "However the printer has also had its own personal mechanical", "have been using the FABtotum personal fabricator for several months", "a printer fitting these needs in these budget categories?: ", "quality lies. For example, I have come across the Form", "resolution, and it is nice if it has multiple modes", "can produce parts relatively quick, good resolution, and it is", "were getting with the FABtotum, but as I mentioned it", "more reliable, can produce parts relatively quick, good resolution, and", "there is one. Can you anyone recommend a printer fitting", "that is where the quality lies. For example, I have", "and it is nice if it has multiple modes (i.e", "needs, but unfortunately our lab is strapped for time, however", "it has produced setbacks. Now I would love to tinker", "many common 3D printing issues, which I find necessary to", "fabricator for several months now. The machine is good, however", "(i.e FDM, SLA, and even 3D scanning is nice). This", "but unfortunately our lab is strapped for time, however we", "Form 2, Ultimaker, and BCN3D sigma printers which seem quite", "reliable, can produce parts relatively quick, good resolution, and it", "if that is where the quality lies. For example, I", "is more reliable, can produce parts relatively quick, good resolution,", "months now. The machine is good, however not flawless, and", "now. The machine is good, however not flawless, and has", "printing issues, which I find necessary to do when becoming", "has produced setbacks. Now I would love to tinker with", "printer and modify it to my needs, but unfortunately our", "in a biological laboratory where we have been using the", "parts relatively quick, good resolution, and it is nice if", "and modify it to my needs, but unfortunately our lab", "that we are willing to pay more if that is", "nice if it has multiple modes (i.e FDM, SLA, and", "needs in these budget categories?: 3000 USD * 5000", "I work in a biological laboratory where we have been", "printer if there is one. Can you anyone recommend a", "equate quality, but I am saying that we are willing", "scanning is nice). This is what we figured we were", "USD or more I know price doesn't equate quality, but", "technique. However the printer has also had its own personal", "has multiple modes (i.e FDM, SLA, and even 3D scanning", "love to tinker with the printer and modify it to", "I know price doesn't equate quality, but I am saying", "as I mentioned it has produced setbacks. Now I would", "printer fitting these needs in these budget categories?: * 3000", "5000 USD * 8000 USD or more I know price", "not flawless, and has set us back from doing experiments.", "to my needs, but unfortunately our lab is strapped for", "is seeking a printer that is more reliable, can produce", "to do when becoming proficient in this technique. However the", "which I find necessary to do when becoming proficient in", "funding for a higher quality printer if there is one.", "anyone recommend a printer fitting these needs in these budget", "however not flawless, and has set us back from doing", "strapped for time, however we have funding for a higher", "for a higher quality printer if there is one. Can", "lies. For example, I have come across the Form 2,", "had its own personal mechanical and software issues. Our lab", "however we have funding for a higher quality printer if", "a higher quality printer if there is one. Can you", "the FABtotum personal fabricator for several months now. The machine", "in this technique. However the printer has also had its", "SLA, and even 3D scanning is nice). This is what", "one. Can you anyone recommend a printer fitting these needs", "what we figured we were getting with the FABtotum, but", "am saying that we are willing to pay more if", "from doing experiments. I have overcome many common 3D printing", "a printer that is more reliable, can produce parts relatively", "if there is one. Can you anyone recommend a printer", "it to my needs, but unfortunately our lab is strapped", "or more I know price doesn't equate quality, but I", "BCN3D sigma printers which seem quite nice. Any opinions are", "price doesn't equate quality, but I am saying that we", "the FABtotum, but as I mentioned it has produced setbacks.", "but I am saying that we are willing to pay", "becoming proficient in this technique. However the printer has also", "if it has multiple modes (i.e FDM, SLA, and even", "back from doing experiments. I have overcome many common 3D", "even 3D scanning is nice). This is what we figured", "seeking a printer that is more reliable, can produce parts", "saying that we are willing to pay more if that", "find necessary to do when becoming proficient in this technique.", "FABtotum personal fabricator for several months now. The machine is", "also had its own personal mechanical and software issues. Our", "is strapped for time, however we have funding for a", "when becoming proficient in this technique. However the printer has", "has also had its own personal mechanical and software issues.", "Now I would love to tinker with the printer and", "recommend a printer fitting these needs in these budget categories?:", "for several months now. The machine is good, however not", "mechanical and software issues. Our lab is seeking a printer", "budget categories?: * 3000 USD * 5000 USD * 8000", "laboratory where we have been using the FABtotum personal fabricator", "the quality lies. For example, I have come across the", "This is what we figured we were getting with the", "setbacks. Now I would love to tinker with the printer", "have funding for a higher quality printer if there is", "our lab is strapped for time, however we have funding", "modes (i.e FDM, SLA, and even 3D scanning is nice).", "the printer and modify it to my needs, but unfortunately", "issues. Our lab is seeking a printer that is more", "personal fabricator for several months now. The machine is good,", "flawless, and has set us back from doing experiments. I", "and software issues. Our lab is seeking a printer that", "are willing to pay more if that is where the", "several months now. The machine is good, however not flawless,", "printers which seem quite nice. Any opinions are very appreciated.", "is nice). This is what we figured we were getting", "we figured we were getting with the FABtotum, but as", "categories?: * 3000 USD * 5000 USD * 8000 USD", "example, I have come across the Form 2, Ultimaker, and", "would love to tinker with the printer and modify it" ]
[ "your part not come loose when it is printing but", "make your part not come loose when it is printing", "that shows an analytical comparison? My biggest interest is PLA", "there that shows an analytical comparison? My biggest interest is", "can be removed after it is done without requiring a", "part not come loose when it is printing but can", "be removed after it is done without requiring a hammer", "of what to put on your printer bed to make", "to put on your printer bed to make your part", "shows an analytical comparison? My biggest interest is PLA on", "a hammer and chisel. Is there anything out there that", "when it is printing but can be removed after it", "without requiring a hammer and chisel. Is there anything out", "and chisel. Is there anything out there that shows an", "it is done without requiring a hammer and chisel. Is", "sorts of stories of what to put on your printer", "loose when it is printing but can be removed after", "stories of what to put on your printer bed to", "My biggest interest is PLA on a heated glass base.", "printer bed to make your part not come loose when", "an analytical comparison? My biggest interest is PLA on a", "not come loose when it is printing but can be", "but can be removed after it is done without requiring", "requiring a hammer and chisel. Is there anything out there", "out there that shows an analytical comparison? My biggest interest", "bed to make your part not come loose when it", "put on your printer bed to make your part not", "Is there anything out there that shows an analytical comparison?", "hammer and chisel. Is there anything out there that shows", "analytical comparison? My biggest interest is PLA on a heated", "anything out there that shows an analytical comparison? My biggest", "removed after it is done without requiring a hammer and", "chisel. Is there anything out there that shows an analytical", "your printer bed to make your part not come loose", "printing but can be removed after it is done without", "done without requiring a hammer and chisel. Is there anything", "comparison? My biggest interest is PLA on a heated glass", "what to put on your printer bed to make your", "There are all sorts of stories of what to put", "of stories of what to put on your printer bed", "on your printer bed to make your part not come", "after it is done without requiring a hammer and chisel.", "is printing but can be removed after it is done", "there anything out there that shows an analytical comparison? My", "to make your part not come loose when it is", "come loose when it is printing but can be removed", "are all sorts of stories of what to put on", "all sorts of stories of what to put on your", "it is printing but can be removed after it is", "is done without requiring a hammer and chisel. Is there" ]
[ "is heated to somewhere around 50-60 degrees C (120-150 F)", "I've noticed that when PLA is heated to somewhere around", "soft and malleable. Does anyone have experience molding hot PLA?", "Is this something that is reasonably easy to do? If", "resulting in a lot of failed prints (as well as", "I'm particularly interested in the viability of the two methods", "(as well as successes, fortunately). I'd like to, if possible,", "or negative) with either I'd like to hear about it.", "of sealant seem the most promising) 2. Are there other", "anyone have experience molding hot PLA? EDIT: To be clear,", "with some kind of sealant seem the most promising) 2.", "would be good to use for the mold? (off the", "about ways to reuse scrap PLA material, not just leftover", "asking about ways to reuse scrap PLA material, not just", "it. I'm particularly interested in the viability of the two", "If so, what temperature would be reasonable to use? What", "reasonable to use? What materials would be good to use", "what temperature would be reasonable to use? What materials would", "the top of my head, silicone or printed ABS with", "to use for the mold? (off the top of my", "printer and have been experimenting with it a lot, resulting", "from these failed prints. I am thinking about two methods:", "and not ways to turn it back into filament or", "interested in the viability of the two methods I suggested,", "sealant seem the most promising) 2. Are there other ways", "to just recycle it. I'm particularly interested in the viability", "C (120-150 F) it becomes somewhat soft and malleable. Does", "to turn it back into filament or to just recycle", "to easily reuse the material? I've noticed that when PLA", "good to use for the mold? (off the top of", "noticed that when PLA is heated to somewhere around 50-60", "material? I've noticed that when PLA is heated to somewhere", "turn it back into filament or to just recycle it.", "filament, and not ways to turn it back into filament", "and if anyone has experience (positive or negative) with either", "recycle it. I'm particularly interested in the viability of the", "PLA is heated to somewhere around 50-60 degrees C (120-150", "ABS with some kind of sealant seem the most promising)", "to somewhere around 50-60 degrees C (120-150 F) it becomes", "materials would be good to use for the mold? (off", "reasonably easy to do? If so, what temperature would be", "for the mold? (off the top of my head, silicone", "kind of sealant seem the most promising) 2. Are there", "ways to turn it back into filament or to just", "promising) 2. Are there other ways to easily reuse the", "not just leftover filament, and not ways to turn it", "the material is to chuck it in an old toaster", "got a 3D printer and have been experimenting with it", "viability of the two methods I suggested, and if anyone", "the most promising) 2. Are there other ways to easily", "Are there other ways to easily reuse the material? I've", "it for injection molding. Is this something that is reasonably", "F) it becomes somewhat soft and malleable. Does anyone have", "scrap PLA material, not just leftover filament, and not ways", "and have been experimenting with it a lot, resulting in", "has experience (positive or negative) with either I'd like to", "2. Are there other ways to easily reuse the material?", "prints. I am thinking about two methods: 1. The obvious", "temperature would be reasonable to use? What materials would be", "so, what temperature would be reasonable to use? What materials", "silicone or printed ABS with some kind of sealant seem", "a lot of failed prints (as well as successes, fortunately).", "in an old toaster oven and reuse it for injection", "I suggested, and if anyone has experience (positive or negative)", "printed ABS with some kind of sealant seem the most", "around 50-60 degrees C (120-150 F) it becomes somewhat soft", "To be clear, I'm specifically asking about ways to reuse", "specifically asking about ways to reuse scrap PLA material, not", "do with the material is to chuck it in an", "recently got a 3D printer and have been experimenting with", "oven and reuse it for injection molding. Is this something", "for injection molding. Is this something that is reasonably easy", "suggested, and if anyone has experience (positive or negative) with", "leftover filament, and not ways to turn it back into", "way to reuse the material from these failed prints. I", "to reuse the material from these failed prints. I am", "would be reasonable to use? What materials would be good", "50-60 degrees C (120-150 F) it becomes somewhat soft and", "PLA? EDIT: To be clear, I'm specifically asking about ways", "use for the mold? (off the top of my head,", "just leftover filament, and not ways to turn it back", "be good to use for the mold? (off the top", "it becomes somewhat soft and malleable. Does anyone have experience", "(positive or negative) with either I'd like to hear about", "experimenting with it a lot, resulting in a lot of", "I am thinking about two methods: 1. The obvious thing", "it back into filament or to just recycle it. I'm", "anyone has experience (positive or negative) with either I'd like", "material from these failed prints. I am thinking about two", "be clear, I'm specifically asking about ways to reuse scrap", "if possible, find a way to reuse the material from", "my head, silicone or printed ABS with some kind of", "(off the top of my head, silicone or printed ABS", "mold? (off the top of my head, silicone or printed", "about two methods: 1. The obvious thing to do with", "clear, I'm specifically asking about ways to reuse scrap PLA", "the two methods I suggested, and if anyone has experience", "(120-150 F) it becomes somewhat soft and malleable. Does anyone", "successes, fortunately). I'd like to, if possible, find a way", "becomes somewhat soft and malleable. Does anyone have experience molding", "ways to reuse scrap PLA material, not just leftover filament,", "PLA material, not just leftover filament, and not ways to", "to, if possible, find a way to reuse the material", "I'd like to, if possible, find a way to reuse", "experience (positive or negative) with either I'd like to hear", "it in an old toaster oven and reuse it for", "to reuse scrap PLA material, not just leftover filament, and", "there other ways to easily reuse the material? I've noticed", "it a lot, resulting in a lot of failed prints", "lot, resulting in a lot of failed prints (as well", "malleable. Does anyone have experience molding hot PLA? EDIT: To", "Does anyone have experience molding hot PLA? EDIT: To be", "two methods: 1. The obvious thing to do with the", "that when PLA is heated to somewhere around 50-60 degrees", "thing to do with the material is to chuck it", "is to chuck it in an old toaster oven and", "is reasonably easy to do? If so, what temperature would", "been experimenting with it a lot, resulting in a lot", "do? If so, what temperature would be reasonable to use?", "methods I suggested, and if anyone has experience (positive or", "somewhere around 50-60 degrees C (120-150 F) it becomes somewhat", "have been experimenting with it a lot, resulting in a", "easy to do? If so, what temperature would be reasonable", "a 3D printer and have been experimenting with it a", "that is reasonably easy to do? If so, what temperature", "degrees C (120-150 F) it becomes somewhat soft and malleable.", "old toaster oven and reuse it for injection molding. Is", "fortunately). I'd like to, if possible, find a way to", "an old toaster oven and reuse it for injection molding.", "experience molding hot PLA? EDIT: To be clear, I'm specifically", "molding hot PLA? EDIT: To be clear, I'm specifically asking", "3D printer and have been experimenting with it a lot,", "material, not just leftover filament, and not ways to turn", "two methods I suggested, and if anyone has experience (positive", "hot PLA? EDIT: To be clear, I'm specifically asking about", "some kind of sealant seem the most promising) 2. Are", "to do? If so, what temperature would be reasonable to", "reuse it for injection molding. Is this something that is", "seem the most promising) 2. Are there other ways to", "ways to easily reuse the material? I've noticed that when", "somewhat soft and malleable. Does anyone have experience molding hot", "be reasonable to use? What materials would be good to", "lot of failed prints (as well as successes, fortunately). I'd", "of the two methods I suggested, and if anyone has", "like to, if possible, find a way to reuse the", "1. The obvious thing to do with the material is", "in a lot of failed prints (as well as successes,", "chuck it in an old toaster oven and reuse it", "and reuse it for injection molding. Is this something that", "failed prints (as well as successes, fortunately). I'd like to,", "to use? What materials would be good to use for", "if anyone has experience (positive or negative) with either I'd", "thinking about two methods: 1. The obvious thing to do", "a lot, resulting in a lot of failed prints (as", "in the viability of the two methods I suggested, and", "toaster oven and reuse it for injection molding. Is this", "am thinking about two methods: 1. The obvious thing to", "material is to chuck it in an old toaster oven", "other ways to easily reuse the material? I've noticed that", "the material? I've noticed that when PLA is heated to", "as successes, fortunately). I'd like to, if possible, find a", "EDIT: To be clear, I'm specifically asking about ways to", "find a way to reuse the material from these failed", "injection molding. Is this something that is reasonably easy to", "a way to reuse the material from these failed prints.", "reuse the material from these failed prints. I am thinking", "reuse the material? I've noticed that when PLA is heated", "of failed prints (as well as successes, fortunately). I'd like", "The obvious thing to do with the material is to", "just recycle it. I'm particularly interested in the viability of", "back into filament or to just recycle it. I'm particularly", "failed prints. I am thinking about two methods: 1. The", "when PLA is heated to somewhere around 50-60 degrees C", "or to just recycle it. I'm particularly interested in the", "something that is reasonably easy to do? If so, what", "use? What materials would be good to use for the", "with it a lot, resulting in a lot of failed", "these failed prints. I am thinking about two methods: 1.", "obvious thing to do with the material is to chuck", "well as successes, fortunately). I'd like to, if possible, find", "I recently got a 3D printer and have been experimenting", "of my head, silicone or printed ABS with some kind", "molding. Is this something that is reasonably easy to do?", "the mold? (off the top of my head, silicone or", "the viability of the two methods I suggested, and if", "into filament or to just recycle it. I'm particularly interested", "not ways to turn it back into filament or to", "this something that is reasonably easy to do? If so,", "to chuck it in an old toaster oven and reuse", "and malleable. Does anyone have experience molding hot PLA? EDIT:", "easily reuse the material? I've noticed that when PLA is", "top of my head, silicone or printed ABS with some", "methods: 1. The obvious thing to do with the material", "to do with the material is to chuck it in", "head, silicone or printed ABS with some kind of sealant", "reuse scrap PLA material, not just leftover filament, and not", "possible, find a way to reuse the material from these", "or printed ABS with some kind of sealant seem the", "heated to somewhere around 50-60 degrees C (120-150 F) it", "filament or to just recycle it. I'm particularly interested in", "particularly interested in the viability of the two methods I", "the material from these failed prints. I am thinking about", "What materials would be good to use for the mold?", "with the material is to chuck it in an old", "most promising) 2. Are there other ways to easily reuse", "I'm specifically asking about ways to reuse scrap PLA material,", "have experience molding hot PLA? EDIT: To be clear, I'm", "prints (as well as successes, fortunately). I'd like to, if" ]
[ "4.0 minutes, while the measured printing time is 2 minutes", "2 minutes and 40 seconds. What reasons could produce this", "have printed a small pyramid for which Cura estimates 4.0", "40 seconds. What reasons could produce this difference? For clarity,", "such as E-step (for E axis) are unpredictable since I", "with a clay extruder for which parameters such as E-step", "that the actual printing time is longer than the time", "time is longer than the time estimated by Cura, due", "I have printed a small pyramid for which Cura estimates", "Cura estimates 4.0 minutes, while the measured printing time is", "What reasons could produce this difference? For clarity, I'm using", "(for E axis) are unpredictable since I have no filament.", "and jerk factor. However, I have printed a small pyramid", "Cura, due to acceleration and jerk factor. However, I have", "time is 2 minutes and 40 seconds. What reasons could", "the time estimated by Cura, due to acceleration and jerk", "and 40 seconds. What reasons could produce this difference? For", "a clay extruder for which parameters such as E-step (for", "Delta Wasp 20 40 equipped with a clay extruder for", "than the time estimated by Cura, due to acceleration and", "measured printing time is 2 minutes and 40 seconds. What", "extruder for which parameters such as E-step (for E axis)", "estimates 4.0 minutes, while the measured printing time is 2", "is longer than the time estimated by Cura, due to", "time estimated by Cura, due to acceleration and jerk factor.", "estimated by Cura, due to acceleration and jerk factor. However,", "due to acceleration and jerk factor. However, I have printed", "for which Cura estimates 4.0 minutes, while the measured printing", "by Cura, due to acceleration and jerk factor. However, I", "I'm using a Delta Wasp 20 40 equipped with a", "actual printing time is longer than the time estimated by", "printed a small pyramid for which Cura estimates 4.0 minutes,", "Wasp 20 40 equipped with a clay extruder for which", "small pyramid for which Cura estimates 4.0 minutes, while the", "seconds. What reasons could produce this difference? For clarity, I'm", "40 equipped with a clay extruder for which parameters such", "I know that the actual printing time is longer than", "E-step (for E axis) are unpredictable since I have no", "However, I have printed a small pyramid for which Cura", "jerk factor. However, I have printed a small pyramid for", "a Delta Wasp 20 40 equipped with a clay extruder", "the actual printing time is longer than the time estimated", "difference? For clarity, I'm using a Delta Wasp 20 40", "while the measured printing time is 2 minutes and 40", "minutes, while the measured printing time is 2 minutes and", "using a Delta Wasp 20 40 equipped with a clay", "pyramid for which Cura estimates 4.0 minutes, while the measured", "which parameters such as E-step (for E axis) are unpredictable", "minutes and 40 seconds. What reasons could produce this difference?", "the measured printing time is 2 minutes and 40 seconds.", "For clarity, I'm using a Delta Wasp 20 40 equipped", "could produce this difference? For clarity, I'm using a Delta", "printing time is 2 minutes and 40 seconds. What reasons", "clarity, I'm using a Delta Wasp 20 40 equipped with", "equipped with a clay extruder for which parameters such as", "factor. However, I have printed a small pyramid for which", "printing time is longer than the time estimated by Cura,", "produce this difference? For clarity, I'm using a Delta Wasp", "parameters such as E-step (for E axis) are unpredictable since", "for which parameters such as E-step (for E axis) are", "reasons could produce this difference? For clarity, I'm using a", "a small pyramid for which Cura estimates 4.0 minutes, while", "clay extruder for which parameters such as E-step (for E", "to acceleration and jerk factor. However, I have printed a", "as E-step (for E axis) are unpredictable since I have", "longer than the time estimated by Cura, due to acceleration", "know that the actual printing time is longer than the", "which Cura estimates 4.0 minutes, while the measured printing time", "acceleration and jerk factor. However, I have printed a small", "is 2 minutes and 40 seconds. What reasons could produce", "this difference? For clarity, I'm using a Delta Wasp 20", "20 40 equipped with a clay extruder for which parameters" ]
[ "this. I know there is a way to do this", "of the two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around x=0. I can get", "by two equations, and I want to generate a STL", "can get a good visualization when I [query this on", "of revolution defined by two equations, and I want to", "or if that is the best way to do this.", "is a way to do this via Wolfram's Development Program", "get a good visualization when I [query this on Wolfram", "[difference of the two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around x=0. I can", "I can get a good visualization when I [query this", "a way to do this via Wolfram's Development Program but", "STL file for printing from the [difference of the two", "this via Wolfram's Development Program but I'm not sure how", "the [difference of the two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around x=0. I", "an STL of this. I know there is a way", "that is the best way to do this. Solutions do", "the best way to do this. Solutions do not have", "around x=0. I can get a good visualization when I", "not sure how or if that is the best way", "to do this via Wolfram's Development Program but I'm not", "a solid of revolution defined by two equations, and I", "have a solid of revolution defined by two equations, and", "Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I cannot figure out how to download an", "visualization when I [query this on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I", "Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I cannot figure out how to download", "I [query this on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I cannot figure", "via Wolfram's Development Program but I'm not sure how or", "download an STL of this. I know there is a", "two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around x=0. I can get a good", "this on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I cannot figure out how", "and I want to generate a STL file for printing", "Wolfram's Development Program but I'm not sure how or if", "solid of revolution defined by two equations, and I want", "but I'm not sure how or if that is the", "if that is the best way to do this. Solutions", "best way to do this. Solutions do not have to", "from the [difference of the two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around x=0.", "good visualization when I [query this on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but", "revolved around x=0. I can get a good visualization when", "how or if that is the best way to do", "to do this. Solutions do not have to involve WA.", "way to do this. Solutions do not have to involve", "way to do this via Wolfram's Development Program but I'm", "but I cannot figure out how to download an STL", "equations, and I want to generate a STL file for", "want to generate a STL file for printing from the", "defined by two equations, and I want to generate a", "to download an STL of this. I know there is", "I cannot figure out how to download an STL of", "a good visualization when I [query this on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4),", "Program but I'm not sure how or if that is", "I have a solid of revolution defined by two equations,", "revolution defined by two equations, and I want to generate", "generate a STL file for printing from the [difference of", "know there is a way to do this via Wolfram's", "when I [query this on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I cannot", "I know there is a way to do this via", "of this. I know there is a way to do", "a STL file for printing from the [difference of the", "how to download an STL of this. I know there", "sure how or if that is the best way to", "I'm not sure how or if that is the best", "the two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around x=0. I can get a", "equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around x=0. I can get a good visualization", "printing from the [difference of the two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around", "cannot figure out how to download an STL of this.", "Development Program but I'm not sure how or if that", "[query this on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I cannot figure out", "STL of this. I know there is a way to", "two equations, and I want to generate a STL file", "do this via Wolfram's Development Program but I'm not sure", "is the best way to do this. Solutions do not", "out how to download an STL of this. I know", "to generate a STL file for printing from the [difference", "file for printing from the [difference of the two equations](https://www.desmos.com/calculator/eh18uwasw9),", "for printing from the [difference of the two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved", "figure out how to download an STL of this. I", "there is a way to do this via Wolfram's Development", "on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I cannot figure out how to", "x=0. I can get a good visualization when I [query", "I want to generate a STL file for printing from" ]
[ "tension to the bolt. Can you please advise me on", "I apply a conventional super glue on the nut and", "a threaded connection. Thus, I need to fix a threaded", "Problem is that the nut keeps falling out of the", "together with a threaded connection. Thus, I need to fix", "wait for a couple of hours and then use it.", "for a couple of hours and then use it. Problem", "couple of hours and then use it. Problem is that", "conventional super glue on the nut and press it inside", "connection. Thus, I need to fix a threaded metal nut", "a corresponding slot which I've implemented in the design. Right", "nut and press it inside the print, wait for a", "then use it. Problem is that the nut keeps falling", "two 3D printed parts (ABS) together with a threaded connection.", "the bolt. Can you please advise me on how to", "I apply a more tension to the bolt. Can you", "to make this method work. Maybe some of you aware", "that the nut keeps falling out of the print when", "a more tension to the bolt. Can you please advise", "print, wait for a couple of hours and then use", "on how to make this method work. Maybe some of", "and press it inside the print, wait for a couple", "the print, wait for a couple of hours and then", "of hours and then use it. Problem is that the", "the design. Right now I apply a conventional super glue", "(ABS) together with a threaded connection. Thus, I need to", "keeps falling out of the print when I apply a", "method work. Maybe some of you aware of special glue", "I've implemented in the design. Right now I apply a", "parts (ABS) together with a threaded connection. Thus, I need", "need to fix a threaded metal nut (M4) inside a", "now I apply a conventional super glue on the nut", "use it. Problem is that the nut keeps falling out", "please advise me on how to make this method work.", "I need to fix a threaded metal nut (M4) inside", "a couple of hours and then use it. Problem is", "falling out of the print when I apply a more", "Can you please advise me on how to make this", "Right now I apply a conventional super glue on the", "is that the nut keeps falling out of the print", "the print when I apply a more tension to the", "(M4) inside a corresponding slot which I've implemented in the", "when I apply a more tension to the bolt. Can", "me on how to make this method work. Maybe some", "trying to connect two 3D printed parts (ABS) together with", "nut keeps falling out of the print when I apply", "this method work. Maybe some of you aware of special", "design. Right now I apply a conventional super glue on", "slot which I've implemented in the design. Right now I", "print when I apply a more tension to the bolt.", "apply a more tension to the bolt. Can you please", "to connect two 3D printed parts (ABS) together with a", "with a threaded connection. Thus, I need to fix a", "inside the print, wait for a couple of hours and", "in the design. Right now I apply a conventional super", "hours and then use it. Problem is that the nut", "some of you aware of special glue for that purposes?", "advise me on how to make this method work. Maybe", "threaded connection. Thus, I need to fix a threaded metal", "implemented in the design. Right now I apply a conventional", "Thus, I need to fix a threaded metal nut (M4)", "press it inside the print, wait for a couple of", "which I've implemented in the design. Right now I apply", "a conventional super glue on the nut and press it", "more tension to the bolt. Can you please advise me", "apply a conventional super glue on the nut and press", "a threaded metal nut (M4) inside a corresponding slot which", "bolt. Can you please advise me on how to make", "how to make this method work. Maybe some of you", "corresponding slot which I've implemented in the design. Right now", "to fix a threaded metal nut (M4) inside a corresponding", "super glue on the nut and press it inside the", "and then use it. Problem is that the nut keeps", "work. Maybe some of you aware of special glue for", "you please advise me on how to make this method", "metal nut (M4) inside a corresponding slot which I've implemented", "make this method work. Maybe some of you aware of", "Maybe some of you aware of special glue for that", "on the nut and press it inside the print, wait", "connect two 3D printed parts (ABS) together with a threaded", "glue on the nut and press it inside the print,", "3D printed parts (ABS) together with a threaded connection. Thus,", "nut (M4) inside a corresponding slot which I've implemented in", "to the bolt. Can you please advise me on how", "of the print when I apply a more tension to", "threaded metal nut (M4) inside a corresponding slot which I've", "it inside the print, wait for a couple of hours", "inside a corresponding slot which I've implemented in the design.", "the nut keeps falling out of the print when I", "out of the print when I apply a more tension", "fix a threaded metal nut (M4) inside a corresponding slot", "I'm trying to connect two 3D printed parts (ABS) together", "printed parts (ABS) together with a threaded connection. Thus, I", "it. Problem is that the nut keeps falling out of", "the nut and press it inside the print, wait for" ]
[ "number of places to choose from, such as next to:", "which type should one use4, radial or axial? [![Common thermal", "it is very often the thermal fuse (axial thermal fuses", "got hot enough to start a fire. This got me", "about their use in a 3D printer. --- ### Footnotes", "cookers and fans in Thailand. In those, it is very", "3D printers, with all of the heated parts, constitutes a", "type should one use4, radial or axial? [![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg)", "contain metal connector within them that melts (permanently) at a", "mitigate the risk of fire, to some extent. * Is", "some print times lasting hours and days, this is not", "added thermal fuses to their 3D printers? Or has anyone", "use of thermal fuses1,2 a good idea3? * Would you", "home... Yes, the recommendation is, when printing, to watch the", "the axial type, and in the motors of fans are", "constitutes a fire risk. A well designed 3D printer should", "well designed 3D printer should be designed to be as", "use more than one? * Where should one place a", "myself having to repair rice cookers and fans in Thailand.", "the thermal fuse (axial thermal fuses for the rice cookers", "them that melts (permanently) at a specific temperature (typically ~135°C),", "hours and days, this is not always feasible, nor practical.", "one? * Where should one place a thermal fuse? Next", "that requires replacing, as they have blown before the device", "Background I have recently found myself having to repair rice", "components should a thermal fuse be placed? There are a", "bed? + The extruder? + Each of the stepper motors?", "standing, in the air, to get an average, rather than", "3D printers? Or has anyone examined where the thermal fuses", "one place a thermal fuse? Next to a particular component,", "(axial thermal fuses for the rice cookers and the square", "within them that melts (permanently) at a specific temperature (typically", "designs, if used at all? --- ### Background I have", "thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone added thermal fuses to their 3D", "use4, radial or axial? [![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone added", "### Footnotes 1 We are not* talking about the standard,", "safe, however, the inherent nature of 3D printers, with all", "thermal fuse be preferable to thermal cut offs, in the", "not talking about the standard, replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow", "in the case of fire? 4 The thermal fuses used", "a good idea3? * Would you use more than one?", "hotend? + The heated bed? + The extruder? + Each", "parts, constitutes a fire risk. A well designed 3D printer", "one used in the home... Yes, the recommendation is, when", "the standard, replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow upon a current", "relatively safe, however, the inherent nature of 3D printers, with", "in commercial 3D printer designs, if used at all? ---", "me thinking about their use in a 3D printer. ---", "always feasible, nor practical. So, some inbuilt safety features should", "be included, to at least mitigate the risk of fire,", "heated parts, constitutes a fire risk. A well designed 3D", "(typically ~135°C), thereby breaking the circuit. 2 Nor am I", "printer at all times and never leave a print unattended.", "current surge, short-circuit, etc. These are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain", "where the thermal fuses are placed in commercial 3D printer", "thermal fuses1,2 a good idea3? * Would you use more", "fire? 4 The thermal fuses used in rice cookers are", "highly localised temperature? * Against which components should a thermal", "a current surge, short-circuit, etc. These are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that", "to be as safe as possible, especially one used in", "cut offs, in the case of fire? 4 The thermal", "feasible, nor practical. So, some inbuilt safety features should be", "3D printer designs, if used at all? --- ### Background", "These are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain metal connector within them", "+ The RAMPS stepper motor drivers? * Of lesser import,", "extruder? + Each of the stepper motors? + The power", "replacing, as they have blown before the device got hot", "offs, in the case of fire? 4 The thermal fuses", "melts (permanently) at a specific temperature (typically ~135°C), thereby breaking", "[resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC, multifuse, polyfuse or polyswitch) 3 Would", "the use of thermal fuses1,2 a good idea3? * Would", "safe as possible, especially one used in the home... Yes,", "possible, especially one used in the home... Yes, the recommendation", "times and never leave a print unattended. However, with some", "thermal fuses to their 3D printers? Or has anyone examined", "nor practical. So, some inbuilt safety features should be included,", "connector within them that melts (permanently) at a specific temperature", "axial? [![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone added thermal fuses to", "and in the motors of fans are the radial type.", "place a thermal fuse? Next to a particular component, or", "supply? + The RAMPS stepper motor drivers? * Of lesser", "for the rice cookers and the square \"radial\" types for", "print times lasting hours and days, this is not always", "Footnotes 1 We are not talking about the standard, replaceable,", "especially one used in the home... Yes, the recommendation is,", "for fans) that requires replacing, as they have blown before", "average, rather than highly localised temperature? * Against which components", "as possible, especially one used in the home... Yes, the", "[fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow upon a current surge, short-circuit, etc. These", "in a 3D printer. --- ### Footnotes 1 We are", "nature of 3D printers, with all of the heated parts,", "that contain metal connector within them that melts (permanently) at", "--- ### Footnotes 1 We are not talking about the", "(AKA PPTC, multifuse, polyfuse or polyswitch) 3 Would a thermal", "should be included, to at least mitigate the risk of", "some extent. * Is the use of thermal fuses1,2 a", "found myself having to repair rice cookers and fans in", "are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain metal connector within them that", "places to choose from, such as next to: + The", "than highly localised temperature? * Against which components should a", "* Where should one place a thermal fuse? Next to", "to: + The hotend? + The heated bed? + The", "thermal fuse (axial thermal fuses for the rice cookers and", "fire risk. A well designed 3D printer should be designed", "[![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone added thermal fuses to their", "included, to at least mitigate the risk of fire, to", "are a number of places to choose from, such as", "+ The hotend? + The heated bed? + The extruder?", "anyone added thermal fuses to their 3D printers? Or has", "before the device got hot enough to start a fire.", "to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC, multifuse, polyfuse or polyswitch) 3", "+ The heated bed? + The extruder? + Each of", "requires replacing, as they have blown before the device got", "fuse be placed? There are a number of places to", "choose from, such as next to: + The hotend? +", "the rice cookers and the square \"radial\" types for fans)", "breaking the circuit. 2 Nor am I referring to [resettable", "the recommendation is, when printing, to watch the 3D printer", "should one place a thermal fuse? Next to a particular", "have blown before the device got hot enough to start", "+ Each of the stepper motors? + The power supply?", "the heated parts, constitutes a fire risk. A well designed", "placed in commercial 3D printer designs, if used at all?", "all times and never leave a print unattended. However, with", "I have recently found myself having to repair rice cookers", "lesser import, which type should one use4, radial or axial?", "axial type, and in the motors of fans are the", "to thermal cut offs, in the case of fire? 4", "as next to: + The hotend? + The heated bed?", "very often the thermal fuse (axial thermal fuses for the", "this is not always feasible, nor practical. So, some inbuilt", "of 3D printers, with all of the heated parts, constitutes", "Where should one place a thermal fuse? Next to a", "such as next to: + The hotend? + The heated", "to at least mitigate the risk of fire, to some", "standard, replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow upon a current surge,", "free standing, in the air, to get an average, rather", "to repair rice cookers and fans in Thailand. In those,", "Thailand. In those, it is very often the thermal fuse", "fuses used in rice cookers are the axial type, and", "air, to get an average, rather than highly localised temperature?", "recommendation is, when printing, to watch the 3D printer at", "with all of the heated parts, constitutes a fire risk.", "radial or axial? [![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone added thermal", "case of fire? 4 The thermal fuses used in rice", "particular component, or free standing, in the air, to get", "risk. A well designed 3D printer should be designed to", "than one? * Where should one place a thermal fuse?", "Has anyone added thermal fuses to their 3D printers? Or", "specific temperature (typically ~135°C), thereby breaking the circuit. 2 Nor", "are not talking about the standard, replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which", "of the heated parts, constitutes a fire risk. A well", "square \"radial\" types for fans) that requires replacing, as they", "extent. * Is the use of thermal fuses1,2 a good", "(permanently) at a specific temperature (typically ~135°C), thereby breaking the", "fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone added thermal fuses to their 3D printers?", "is, when printing, to watch the 3D printer at all", "a specific temperature (typically ~135°C), thereby breaking the circuit. 2", "inherent nature of 3D printers, with all of the heated", "multifuse, polyfuse or polyswitch) 3 Would a thermal fuse be", "some inbuilt safety features should be included, to at least", "talking about the standard, replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow upon", "temperature (typically ~135°C), thereby breaking the circuit. 2 Nor am", "The thermal fuses used in rice cookers are the axial", "days, this is not always feasible, nor practical. So, some", "of places to choose from, such as next to: +", "fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC, multifuse, polyfuse or polyswitch) 3 Would a", "fuses for the rice cookers and the square \"radial\" types", "cookers are the axial type, and in the motors of", "the home... Yes, the recommendation is, when printing, to watch", "The heated bed? + The extruder? + Each of the", "3D printer should be designed to be as safe as", "stepper motors? + The power supply? + The RAMPS stepper", "referring to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC, multifuse, polyfuse or polyswitch)", "type, and in the motors of fans are the radial", "next to: + The hotend? + The heated bed? +", "you use more than one? * Where should one place", "fire, to some extent. * Is the use of thermal", "a number of places to choose from, such as next", "watch the 3D printer at all times and never leave", "be preferable to thermal cut offs, in the case of", "designed 3D printer should be designed to be as safe", "never leave a print unattended. However, with some print times", "etc. These are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain metal connector within", "and fans in Thailand. In those, it is very often", "cookers and the square \"radial\" types for fans) that requires", "* Is the use of thermal fuses1,2 a good idea3?", "3D printing should be relatively safe, however, the inherent nature", "inbuilt safety features should be included, to at least mitigate", "to choose from, such as next to: + The hotend?", "which components should a thermal fuse be placed? There are", "to watch the 3D printer at all times and never", "those, it is very often the thermal fuse (axial thermal", "often the thermal fuse (axial thermal fuses for the rice", "am I referring to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC, multifuse, polyfuse", "be placed? There are a number of places to choose", "thermal fuses are placed in commercial 3D printer designs, if", "has anyone examined where the thermal fuses are placed in", "enough to start a fire. This got me thinking about", "Each of the stepper motors? + The power supply? +", "at all? --- ### Background I have recently found myself", "fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain metal connector within them that melts (permanently)", "get an average, rather than highly localised temperature? * Against", "So, some inbuilt safety features should be included, to at", "good idea3? * Would you use more than one? ", "fire. This got me thinking about their use in a", "placed? There are a number of places to choose from,", "times lasting hours and days, this is not always feasible,", "printer. --- ### Footnotes 1 We are not* talking about", "their use in a 3D printer. --- ### Footnotes 1", "However, with some print times lasting hours and days, this", "are placed in commercial 3D printer designs, if used at", "to start a fire. This got me thinking about their", "risk of fire, to some extent. * Is the use", "A well designed 3D printer should be designed to be", "--- ### Background I have recently found myself having to", "a thermal fuse? Next to a particular component, or free", "printers, with all of the heated parts, constitutes a fire", "hot enough to start a fire. This got me thinking", "Would a thermal fuse be preferable to thermal cut offs,", "thereby breaking the circuit. 2 Nor am I referring to", "at all times and never leave a print unattended. However,", "a fire. This got me thinking about their use in", "at least mitigate the risk of fire, to some extent.", "temperature? Against which components should a thermal fuse be", "polyfuse or polyswitch) 3 Would a thermal fuse be preferable", "circuit. 2 Nor am I referring to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA", "thinking about their use in a 3D printer. --- ###", "be relatively safe, however, the inherent nature of 3D printers,", "Is the use of thermal fuses1,2 a good idea3? ", "Next to a particular component, or free standing, in the", "fuse (axial thermal fuses for the rice cookers and the", "a 3D printer. --- ### Footnotes 1 We are not", "thermal cut offs, in the case of fire? 4 The", "or polyswitch) 3 Would a thermal fuse be preferable to", "about the standard, replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow upon a", "blow upon a current surge, short-circuit, etc. These are [thermal", "I referring to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC, multifuse, polyfuse or", "We are not* talking about the standard, replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)),", "localised* temperature? * Against which components should a thermal fuse", "The power supply? + The RAMPS stepper motor drivers? ", "motor drivers? Of lesser import, which type should one", "stepper motor drivers? * Of lesser import, which type should", "they have blown before the device got hot enough to", "in the home... Yes, the recommendation is, when printing, to", "are the axial type, and in the motors of fans", "printer designs, if used at all? --- ### Background I", "used in the home... Yes, the recommendation is, when printing,", "the inherent nature of 3D printers, with all of the", "be as safe as possible, especially one used in the", "repair rice cookers and fans in Thailand. In those, it", "Of lesser import, which type should one use4, radial or", "in Thailand. In those, it is very often the thermal", "PPTC, multifuse, polyfuse or polyswitch) 3 Would a thermal fuse", "thermal fuses used in rice cookers are the axial type,", "Yes, the recommendation is, when printing, to watch the 3D", "their 3D printers? Or has anyone examined where the thermal", "should a thermal fuse be placed? There are a number", "or axial? [![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone added thermal fuses", "printing, to watch the 3D printer at all times and", "recently found myself having to repair rice cookers and fans", "This got me thinking about their use in a 3D", "metal connector within them that melts (permanently) at a specific", "of fire? 4 The thermal fuses used in rice cookers", "in rice cookers are the axial type, and in the", "and days, this is not always feasible, nor practical. So,", "use in a 3D printer. --- ### Footnotes 1 We", "+ The extruder? + Each of the stepper motors? +", "power supply? + The RAMPS stepper motor drivers? * Of", "idea3? * Would you use more than one? * Where", "of thermal fuses1,2 a good idea3? * Would you use", "practical. So, some inbuilt safety features should be included, to", "as they have blown before the device got hot enough", "or free standing, in the air, to get an average,", "~135°C), thereby breaking the circuit. 2 Nor am I referring", "the 3D printer at all times and never leave a", "4 The thermal fuses used in rice cookers are the", "be designed to be as safe as possible, especially one", "the risk of fire, to some extent. * Is the", "and the square \"radial\" types for fans) that requires replacing,", "lasting hours and days, this is not always feasible, nor", "fans) that requires replacing, as they have blown before the", "examined where the thermal fuses are placed in commercial 3D", "There are a number of places to choose from, such", "types for fans) that requires replacing, as they have blown", "should one use4, radial or axial? [![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has", "a print unattended. However, with some print times lasting hours", "having to repair rice cookers and fans in Thailand. In", "least mitigate the risk of fire, to some extent. ", "the circuit. 2 Nor am I referring to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse)", "and never leave a print unattended. However, with some print", "component, or free standing, in the air, to get an", "a particular component, or free standing, in the air, to", "rice cookers and the square \"radial\" types for fans) that", "commercial 3D printer designs, if used at all? --- ###", "fuses1,2 a good idea3? Would you use more than", "of fire, to some extent. * Is the use of", "rather than highly localised temperature? * Against which components should", "all of the heated parts, constitutes a fire risk. A", "\"radial\" types for fans) that requires replacing, as they have", "with some print times lasting hours and days, this is", "the air, to get an average, rather than highly localised", "The RAMPS stepper motor drivers? * Of lesser import, which", "fans in Thailand. In those, it is very often the", "thermal fuse be placed? There are a number of places", "device got hot enough to start a fire. This got", "at a specific temperature (typically ~135°C), thereby breaking the circuit.", "features should be included, to at least mitigate the risk", "all? --- ### Background I have recently found myself having", "1 We are not talking about the standard, replaceable, thermo-fuse,or", "print unattended. However, with some print times lasting hours and", "preferable to thermal cut offs, in the case of fire?", "anyone examined where the thermal fuses are placed in commercial", "The hotend? + The heated bed? + The extruder? +", "heated bed? + The extruder? + Each of the stepper", "motors? + The power supply? + The RAMPS stepper motor", "3D printer. --- ### Footnotes 1 We are not talking", "3 Would a thermal fuse be preferable to thermal cut", "rice cookers and fans in Thailand. In those, it is", "thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow upon a current surge, short-circuit, etc.", "printing should be relatively safe, however, the inherent nature of", "the device got hot enough to start a fire. This", "used at all? --- ### Background I have recently found", "upon a current surge, short-circuit, etc. These are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse)", "not always feasible, nor practical. So, some inbuilt safety features", "Against which components should a thermal fuse be placed? There", "blown before the device got hot enough to start a", "should be designed to be as safe as possible, especially", "the square \"radial\" types for fans) that requires replacing, as", "surge, short-circuit, etc. These are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain metal", "when printing, to watch the 3D printer at all times", "have recently found myself having to repair rice cookers and", "designed to be as safe as possible, especially one used", "unattended. However, with some print times lasting hours and days,", "to their 3D printers? Or has anyone examined where the", "that melts (permanently) at a specific temperature (typically ~135°C), thereby", "* Of lesser import, which type should one use4, radial", "as safe as possible, especially one used in the home...", "3D printer at all times and never leave a print", "more than one? * Where should one place a thermal", "the case of fire? 4 The thermal fuses used in", "printers? Or has anyone examined where the thermal fuses are", "a fire risk. A well designed 3D printer should be", "a thermal fuse be placed? There are a number of", "drivers? * Of lesser import, which type should one use4,", "short-circuit, etc. These are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain metal connector", "in the air, to get an average, rather than highly", "import, which type should one use4, radial or axial? [![Common", " Would you use more than one? * Where should", "to a particular component, or free standing, in the air,", "used in rice cookers are the axial type, and in", "+ The power supply? + The RAMPS stepper motor drivers?", "RAMPS stepper motor drivers? * Of lesser import, which type", "rice cookers are the axial type, and in the motors", "### Background I have recently found myself having to repair", "printer should be designed to be as safe as possible,", "Or has anyone examined where the thermal fuses are placed", "thermal fuse? Next to a particular component, or free standing,", "* Against which components should a thermal fuse be placed?", "a thermal fuse be preferable to thermal cut offs, in", "of the stepper motors? + The power supply? + The", "one use4, radial or axial? [![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone", "thermal fuses for the rice cookers and the square \"radial\"", "which blow upon a current surge, short-circuit, etc. These are", "The extruder? + Each of the stepper motors? + The", "safety features should be included, to at least mitigate the", "leave a print unattended. However, with some print times lasting", "the thermal fuses are placed in commercial 3D printer designs,", "is very often the thermal fuse (axial thermal fuses for", "fuses are placed in commercial 3D printer designs, if used", "from, such as next to: + The hotend? + The", "polyswitch) 3 Would a thermal fuse be preferable to thermal", "replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow upon a current surge, short-circuit,", "is not always feasible, nor practical. So, some inbuilt safety", "to get an average, rather than highly localised temperature? ", "to some extent. Is the use of thermal fuses1,2", "fuse? Next to a particular component, or free standing, in", "should be relatively safe, however, the inherent nature of 3D", "Nor am I referring to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC, multifuse,", "however, the inherent nature of 3D printers, with all of", "an average, rather than highly localised temperature? * Against which", "2 Nor am I referring to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC,", "fuse be preferable to thermal cut offs, in the case", "start a fire. This got me thinking about their use", "if used at all? --- ### Background I have recently", "Would you use more than one? * Where should one", "the stepper motors? + The power supply? + The RAMPS", "In those, it is very often the thermal fuse (axial", "got me thinking about their use in a 3D printer.", "fuses to their 3D printers? Or has anyone examined where", "[thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain metal connector within them that melts" ]
[ "me on how to get started. I have a LOT", "started. I have a LOT of experience in Software Development", "want to start with the UI rather than the Engine.", "than I want to admit to); but, I have never", "I want to admit to); but, I have never used", "on how to get started. I have a LOT of", "was surprised I couldn't find a build guide. Can someone", "the web. For such a popular open-source product, I was", "but, I have never used Python. Consider that in your", "and searched the web. For such a popular open-source product,", "the Engine. I have found the [repository](https://github.com/Ultimaker/Cura) and have cloned", "how to get started. I have a LOT of experience", "than the Engine. I have found the [repository](https://github.com/Ultimaker/Cura) and have", "also looked over the [Wiki](https://github.com/Ultimaker/Cura/wiki) and searched the web. For", "to start with the UI rather than the Engine. I", "am interested in doing development on Cura. Initially I want", "have also looked over the [Wiki](https://github.com/Ultimaker/Cura/wiki) and searched the web.", "the [Wiki](https://github.com/Ultimaker/Cura/wiki) and searched the web. For such a popular", "years and languages than I want to admit to); but,", "I couldn't find a build guide. Can someone direct me", "in Software Development (more years and languages than I want", "a LOT of experience in Software Development (more years and", "product, I was surprised I couldn't find a build guide.", "of experience in Software Development (more years and languages than", "get started. I have a LOT of experience in Software", "find a build guide. Can someone direct me on how", "Engine. I have found the [repository](https://github.com/Ultimaker/Cura) and have cloned it", "and languages than I want to admit to); but, I", "I want to start with the UI rather than the", "someone direct me on how to get started. I have", "rather than the Engine. I have found the [repository](https://github.com/Ultimaker/Cura) and", "web. For such a popular open-source product, I was surprised", "Development (more years and languages than I want to admit", "and have cloned it to my PC. I have also", "cloned it to my PC. I have also looked over", "it to my PC. I have also looked over the", "build guide. Can someone direct me on how to get", "to admit to); but, I have never used Python. Consider", "I have never used Python. Consider that in your instructions.", "UI rather than the Engine. I have found the [repository](https://github.com/Ultimaker/Cura)", "PC. I have also looked over the [Wiki](https://github.com/Ultimaker/Cura/wiki) and searched", "Cura. Initially I want to start with the UI rather", "such a popular open-source product, I was surprised I couldn't", "I am interested in doing development on Cura. Initially I", "looked over the [Wiki](https://github.com/Ultimaker/Cura/wiki) and searched the web. For such", "I was surprised I couldn't find a build guide. Can", "experience in Software Development (more years and languages than I", "I have a LOT of experience in Software Development (more", "doing development on Cura. Initially I want to start with", "to get started. I have a LOT of experience in", "to my PC. I have also looked over the [Wiki](https://github.com/Ultimaker/Cura/wiki)", "admit to); but, I have never used Python. Consider that", "a popular open-source product, I was surprised I couldn't find", "have cloned it to my PC. I have also looked", "I have found the [repository](https://github.com/Ultimaker/Cura) and have cloned it to", "I have also looked over the [Wiki](https://github.com/Ultimaker/Cura/wiki) and searched the", "my PC. I have also looked over the [Wiki](https://github.com/Ultimaker/Cura/wiki) and", "to); but, I have never used Python. Consider that in", "a build guide. Can someone direct me on how to", "the UI rather than the Engine. I have found the", "in doing development on Cura. Initially I want to start", "over the [Wiki](https://github.com/Ultimaker/Cura/wiki) and searched the web. For such a", "want to admit to); but, I have never used Python.", "open-source product, I was surprised I couldn't find a build", "with the UI rather than the Engine. I have found", "searched the web. For such a popular open-source product, I", "development on Cura. Initially I want to start with the", "direct me on how to get started. I have a", "languages than I want to admit to); but, I have", "found the [repository](https://github.com/Ultimaker/Cura) and have cloned it to my PC.", "on Cura. Initially I want to start with the UI", "start with the UI rather than the Engine. I have", "Can someone direct me on how to get started. I", "For such a popular open-source product, I was surprised I", "[Wiki](https://github.com/Ultimaker/Cura/wiki) and searched the web. For such a popular open-source", "have found the [repository](https://github.com/Ultimaker/Cura) and have cloned it to my", "[repository](https://github.com/Ultimaker/Cura) and have cloned it to my PC. I have", "interested in doing development on Cura. Initially I want to", "LOT of experience in Software Development (more years and languages", "have a LOT of experience in Software Development (more years", "(more years and languages than I want to admit to);", "popular open-source product, I was surprised I couldn't find a", "Initially I want to start with the UI rather than", "guide. Can someone direct me on how to get started.", "surprised I couldn't find a build guide. Can someone direct", "couldn't find a build guide. Can someone direct me on", "the [repository](https://github.com/Ultimaker/Cura) and have cloned it to my PC. I", "Software Development (more years and languages than I want to" ]
[ "have gone back to the default settings because nothing else", "Print Temp 210°C * Bed Temp 65°C * Dia 1.75", "you can also how the top layer has two bubble", "because nothing else was working. * Using blue painter's tape", "Bed Temp 65°C * Dia 1.75 mm * Flow 100%", "with two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top", "blue painter's tape * Layer Height 0.1 mm * In.", "time I would try infill from 10-90% the first layer", "* In. Layer Height 0.3 mm * WallThicken 0.8 mm", "won't print the first layers for anything well but once", "3D print, showing top layer with two bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo", "an Anet A8 printer for about two months now and", "really filmy like. As of now, it won't print the", "effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer with two", "the print is supposed to be a 10 mm square.", "top layer with two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print,", "print, showing top layer with two bubble effects\") In the", "pictures show my recent attempt at these settings below (Cura's", "A8 printer for about two months now and still have", "I would try infill from 10-90% the first layer would", "can also how the top layer has two bubble effects.", "was working. * Using blue painter's tape * Layer Height", "bubble effects\") In the top picture you can also how", "* Bed Temp 65°C * Dia 1.75 mm * Flow", "showing top layer with two bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D", "Flow 100% * Bcit (raft is a little better) Any", "gone back to the default settings because nothing else was", "print really filmy like. As of now, it won't print", "printer for about two months now and still have not", "showing top layer with two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D", "showing top layer with two bubble effects\") In the top", "the first layer would not stick or it would print", "it worse. The pictures show my recent attempt at these", "two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer", "tried a lot of stuff but it seems to be", "square. I have gone back to the default settings because", "* Dia 1.75 mm * Flow 100% * Bcit (raft", "lot of stuff but it seems to be making it", "every time I would try infill from 10-90% the first", "Thick 0.8 mm * Infill Density 20% * Grid Pattern", "better) Any suggestions? [![Photo of 3D print, showing top layer", "layer with two bubble effects\") In the top picture you", "print completely solid parts and every time I would try", "to the default settings because nothing else was working. ", "but it seems to be making it worse. The pictures", "WallThicken 0.8 mm Top/Bottom Thick 0.8 mm * Infill", "of 3D print, showing top layer with two bubble effects](https://i.stack.imgur.com/uQMNN.jpg", "I have tried a lot of stuff but it seems", "have had an Anet A8 printer for about two months", "solid parts and every time I would try infill from", "had an Anet A8 printer for about two months now", "only print completely solid parts and every time I would", "mm * WallThicken 0.8 mm * Top/Bottom Thick 0.8 mm", "* Using blue painter's tape * Layer Height 0.1 mm", "10-ish layers it prints perfectly. I have tried a lot", "two bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer", "* Top/Bottom Thick 0.8 mm * Infill Density 20% ", "with two bubble effects\") In the top picture you can", "nothing else was working. Using blue painter's tape ", "first layers for anything well but once it gets up", "show my recent attempt at these settings below (Cura's default", "now and still have not gotten it to print good", "about 10-ish layers it prints perfectly. I have tried a", "Pattern Print Temp 210°C * Bed Temp 65°C ", "recent attempt at these settings below (Cura's default for normal", "Height 0.1 mm In. Layer Height 0.3 mm ", "1.75 mm Flow 100% * Bcit (raft is a", "completely solid parts and every time I would try infill", "attempt at these settings below (Cura's default for normal quality),", "of 3D print, showing top layer with two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg", "top layer with two bubble effects\") In the top picture", "* Flow 100% * Bcit (raft is a little better)", "Layer Height 0.3 mm * WallThicken 0.8 mm * Top/Bottom", "is a little better) Any suggestions? [![Photo of 3D print,", "The pictures show my recent attempt at these settings below", "Any suggestions? [![Photo of 3D print, showing top layer with", "layers it prints perfectly. I have tried a lot of", "normal quality), the print is supposed to be a 10", "Layer Height 0.1 mm * In. Layer Height 0.3 mm", "working. * Using blue painter's tape * Layer Height 0.1", "these settings below (Cura's default for normal quality), the print", "it would only print completely solid parts and every time", "* Print Temp 210°C * Bed Temp 65°C * Dia", "Dia 1.75 mm * Flow 100% * Bcit (raft is", "bubble effects. [![3D Print with brim](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print with brim\")](https://i.stack.imgur.com/N0ZT3.jpg", "(Cura's default for normal quality), the print is supposed to", "it prints perfectly. I have tried a lot of stuff", "well but once it gets up about 10-ish layers it", "the first layers for anything well but once it gets", "Anet A8 printer for about two months now and still", "bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer with", "gets up about 10-ish layers it prints perfectly. I have", "and every time I would try infill from 10-90% the", "at these settings below (Cura's default for normal quality), the", "have not gotten it to print good prints. At first,", "* Layer Height 0.1 mm * In. Layer Height 0.3", "10-90% the first layer would not stick or it would", "to be making it worse. The pictures show my recent", "mm * In. Layer Height 0.3 mm * WallThicken 0.8", "3D print, showing top layer with two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo", "it seems to be making it worse. The pictures show", "default for normal quality), the print is supposed to be", "two months now and still have not gotten it to", "layer with two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing", "be making it worse. The pictures show my recent attempt", "* Infill Density 20% * Grid Pattern * Print Temp", "default settings because nothing else was working. * Using blue", "Temp 210°C * Bed Temp 65°C * Dia 1.75 mm", "picture you can also how the top layer has two", "[![3D Print with brim](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print with brim\")](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print", "prints. At first, it would only print completely solid parts", "Density 20% * Grid Pattern * Print Temp 210°C ", "In. Layer Height 0.3 mm WallThicken 0.8 mm ", "to be a 10 mm square. I have gone back", "from 10-90% the first layer would not stick or it", "65°C Dia 1.75 mm * Flow 100% * Bcit", "0.8 mm * Top/Bottom Thick 0.8 mm * Infill Density", "a little better) Any suggestions? [![Photo of 3D print, showing", "have tried a lot of stuff but it seems to", "would print really filmy like. As of now, it won't", "would try infill from 10-90% the first layer would not", "be a 10 mm square. I have gone back to", "little better) Any suggestions? [![Photo of 3D print, showing top", "making it worse. The pictures show my recent attempt at", "effects\") In the top picture you can also how the", "10 mm square. I have gone back to the default", "try infill from 10-90% the first layer would not stick", "back to the default settings because nothing else was working.", "also how the top layer has two bubble effects. [![3D", "tape * Layer Height 0.1 mm * In. Layer Height", "a 10 mm square. I have gone back to the", "stick or it would print really filmy like. As of", "like. As of now, it won't print the first layers", "print is supposed to be a 10 mm square. I", "not gotten it to print good prints. At first, it", "I have had an Anet A8 printer for about two", "once it gets up about 10-ish layers it prints perfectly.", "the top picture you can also how the top layer", "Top/Bottom Thick 0.8 mm * Infill Density 20% * Grid", "not stick or it would print really filmy like. As", "As of now, it won't print the first layers for", "settings below (Cura's default for normal quality), the print is", "mm * Top/Bottom Thick 0.8 mm * Infill Density 20%", "In the top picture you can also how the top", "At first, it would only print completely solid parts and", "of 3D print, showing top layer with two bubble effects\")", "mm square. I have gone back to the default settings", "would only print completely solid parts and every time I", "supposed to be a 10 mm square. I have gone", "\"Photo of 3D print, showing top layer with two bubble", "effects. [![3D Print with brim](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print with brim\")](https://i.stack.imgur.com/N0ZT3.jpg \"3D", "with brim](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print with brim\")](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print with brim\")", "has two bubble effects. [![3D Print with brim](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print", "0.3 mm * WallThicken 0.8 mm * Top/Bottom Thick 0.8", "about two months now and still have not gotten it", "now, it won't print the first layers for anything well", "infill from 10-90% the first layer would not stick or", "still have not gotten it to print good prints. At", "or it would print really filmy like. As of now,", "and still have not gotten it to print good prints.", "parts and every time I would try infill from 10-90%", "it would print really filmy like. As of now, it", "it gets up about 10-ish layers it prints perfectly. I", "of stuff but it seems to be making it worse.", "mm * Flow 100% * Bcit (raft is a little", "Bcit (raft is a little better) Any suggestions? [![Photo of", "prints perfectly. I have tried a lot of stuff but", "* Bcit (raft is a little better) Any suggestions? [![Photo", "of now, it won't print the first layers for anything", "top layer with two bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print,", "to print good prints. At first, it would only print", "* WallThicken 0.8 mm * Top/Bottom Thick 0.8 mm ", "stuff but it seems to be making it worse. The", "for normal quality), the print is supposed to be a", "for about two months now and still have not gotten", "effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer with two", "Print with brim](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print with brim\")](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print with", "layer with two bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing", "settings because nothing else was working. Using blue painter's", "two bubble effects\") In the top picture you can also", "0.8 mm * Infill Density 20% * Grid Pattern ", "but once it gets up about 10-ish layers it prints", "below (Cura's default for normal quality), the print is supposed", "the top layer has two bubble effects. [![3D Print with", "for anything well but once it gets up about 10-ish", "I have gone back to the default settings because nothing", "print the first layers for anything well but once it", " Grid Pattern * Print Temp 210°C * Bed Temp", "layer has two bubble effects. [![3D Print with brim](https://i.stack.imgur.com/N0ZT3.jpg \"3D", "first, it would only print completely solid parts and every", "quality), the print is supposed to be a 10 mm", "print, showing top layer with two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of", "first layer would not stick or it would print really", "gotten it to print good prints. At first, it would", "Height 0.3 mm * WallThicken 0.8 mm * Top/Bottom Thick", "with two bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top", "3D print, showing top layer with two bubble effects\") In", "Grid Pattern * Print Temp 210°C * Bed Temp 65°C", "else was working. * Using blue painter's tape * Layer", "layer would not stick or it would print really filmy", "suggestions? [![Photo of 3D print, showing top layer with two", "good prints. At first, it would only print completely solid", "the default settings because nothing else was working. * Using", "Using blue painter's tape * Layer Height 0.1 mm ", "print good prints. At first, it would only print completely", "filmy like. As of now, it won't print the first", "layers for anything well but once it gets up about", "two bubble effects. [![3D Print with brim](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print with", "worse. The pictures show my recent attempt at these settings", "anything well but once it gets up about 10-ish layers", "my recent attempt at these settings below (Cura's default for", "painter's tape Layer Height 0.1 mm * In. Layer", "months now and still have not gotten it to print", "210°C * Bed Temp 65°C * Dia 1.75 mm ", "seems to be making it worse. The pictures show my", "Infill Density 20% Grid Pattern * Print Temp 210°C", "how the top layer has two bubble effects. [![3D Print", "it won't print the first layers for anything well but", "is supposed to be a 10 mm square. I have", "[![Photo of 3D print, showing top layer with two bubble", "print, showing top layer with two bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of", "20% * Grid Pattern * Print Temp 210°C * Bed", "0.1 mm * In. Layer Height 0.3 mm * WallThicken", "100% * Bcit (raft is a little better) Any suggestions?", "(raft is a little better) Any suggestions? [![Photo of 3D", "top layer has two bubble effects. [![3D Print with brim](https://i.stack.imgur.com/N0ZT3.jpg", "would not stick or it would print really filmy like.", "Temp 65°C * Dia 1.75 mm * Flow 100% ", "mm Infill Density 20% * Grid Pattern * Print", "up about 10-ish layers it prints perfectly. I have tried", "bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer with", "it to print good prints. At first, it would only", "perfectly. I have tried a lot of stuff but it", "a lot of stuff but it seems to be making", "top picture you can also how the top layer has" ]
[ "in my country, and I cannot get it. What substitute", "my country, and I cannot get it. What substitute could", "Acetone is banned in my country, and I cannot get", "and I cannot get it. What substitute could I use?", "banned in my country, and I cannot get it. What", "is banned in my country, and I cannot get it.", "country, and I cannot get it. What substitute could I" ]
[ "is my best idea currently. Has anyone found success with", "PLA print with ABS supports, followed by dissolution of ABS", "considered other options since PVA is ~4x more expensive than", "ABS with acetone, is my best idea currently. Has anyone", "which is soluble in water. It seems like a great", "the supports with PVA, then throw the whole thing in", "I print with ABS. The image below, from [Thingiverse -", "best idea currently. Has anyone found success with another option?", "a PLA print with ABS supports, followed by dissolution of", "supports from a black ABS model. [![Yellow ABS supports removed", "more expensive than ABS. Doing a PLA print with ABS", "- MOF-5 unit cell](https://www.thingiverse.com/thing:1613957), is after significant effort to remove", "model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned about polyvinylalcohol (PVA) as a 3D-printing filament", "or PLA and the supports with PVA, then throw the", "image below, from [Thingiverse - MOF-5 unit cell](https://www.thingiverse.com/thing:1613957), is after", "for dual-extruder printers, where you can print the model with", "learned about polyvinylalcohol (PVA) as a 3D-printing filament which is", "then throw the whole thing in water and let the", "other options since PVA is ~4x more expensive than ABS.", "acetone, is my best idea currently. Has anyone found success", "from black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned about polyvinylalcohol (PVA) as", "I've learned about polyvinylalcohol (PVA) as a 3D-printing filament which", "with ABS or PLA and the supports with PVA, then", "The image below, from [Thingiverse - MOF-5 unit cell](https://www.thingiverse.com/thing:1613957), is", "is soluble in water. It seems like a great option", "polyvinylalcohol (PVA) as a 3D-printing filament which is soluble in", "by dissolution of ABS with acetone, is my best idea", "ABS. Doing a PLA print with ABS supports, followed by", "with acetone, is my best idea currently. Has anyone found", "model. [![Yellow ABS supports removed from black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've", "PVA, then throw the whole thing in water and let", "option for dual-extruder printers, where you can print the model", "a black ABS model. [![Yellow ABS supports removed from black", "in water and let the supports dissolve. I've considered other", "MOF-5 unit cell](https://www.thingiverse.com/thing:1613957), is after significant effort to remove the", "unit cell](https://www.thingiverse.com/thing:1613957), is after significant effort to remove the yellow", "after significant effort to remove the yellow ABS supports from", "PVA is ~4x more expensive than ABS. Doing a PLA", "remove (physically) when I print with ABS. The image below,", "model with ABS or PLA and the supports with PVA,", "is after significant effort to remove the yellow ABS supports", "can print the model with ABS or PLA and the", "seems like a great option for dual-extruder printers, where you", "let the supports dissolve. I've considered other options since PVA", "remove the yellow ABS supports from a black ABS model.", "[![Yellow ABS supports removed from black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned", "the whole thing in water and let the supports dissolve.", "from a black ABS model. [![Yellow ABS supports removed from", "ABS. The image below, from [Thingiverse - MOF-5 unit cell](https://www.thingiverse.com/thing:1613957),", "supports are very difficult to remove (physically) when I print", "water. It seems like a great option for dual-extruder printers,", "PLA and the supports with PVA, then throw the whole", "options since PVA is ~4x more expensive than ABS. Doing", "effort to remove the yellow ABS supports from a black", "black ABS model. [![Yellow ABS supports removed from black ABS", "a great option for dual-extruder printers, where you can print", "the supports dissolve. I've considered other options since PVA is", "is ~4x more expensive than ABS. Doing a PLA print", "print with ABS supports, followed by dissolution of ABS with", "dissolve. I've considered other options since PVA is ~4x more", "(physically) when I print with ABS. The image below, from", "than ABS. Doing a PLA print with ABS supports, followed", "a 3D-printing filament which is soluble in water. It seems", "the yellow ABS supports from a black ABS model. [![Yellow", "about polyvinylalcohol (PVA) as a 3D-printing filament which is soluble", "like a great option for dual-extruder printers, where you can", "where you can print the model with ABS or PLA", "with PVA, then throw the whole thing in water and", "It seems like a great option for dual-extruder printers, where", "supports dissolve. I've considered other options since PVA is ~4x", "with ABS. The image below, from [Thingiverse - MOF-5 unit", "supports, followed by dissolution of ABS with acetone, is my", "dissolution of ABS with acetone, is my best idea currently.", "3D-printing filament which is soluble in water. It seems like", "difficult to remove (physically) when I print with ABS. The", "cell](https://www.thingiverse.com/thing:1613957), is after significant effort to remove the yellow ABS", "~4x more expensive than ABS. Doing a PLA print with", "my best idea currently. Has anyone found success with another", "ABS supports, followed by dissolution of ABS with acetone, is", "of ABS with acetone, is my best idea currently. Has", "as a 3D-printing filament which is soluble in water. It", "Sometimes supports are very difficult to remove (physically) when I", "black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned about polyvinylalcohol (PVA) as a", "the model with ABS or PLA and the supports with", "dual-extruder printers, where you can print the model with ABS", "and the supports with PVA, then throw the whole thing", "yellow ABS supports from a black ABS model. [![Yellow ABS", "ABS model. [![Yellow ABS supports removed from black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png)", "ABS or PLA and the supports with PVA, then throw", "ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned about polyvinylalcohol (PVA) as a 3D-printing", "I've considered other options since PVA is ~4x more expensive", "[Thingiverse - MOF-5 unit cell](https://www.thingiverse.com/thing:1613957), is after significant effort to", "soluble in water. It seems like a great option for", "in water. It seems like a great option for dual-extruder", "supports with PVA, then throw the whole thing in water", "whole thing in water and let the supports dissolve. I've", "and let the supports dissolve. I've considered other options since", "expensive than ABS. Doing a PLA print with ABS supports,", "filament which is soluble in water. It seems like a", "printers, where you can print the model with ABS or", "removed from black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned about polyvinylalcohol (PVA)", "throw the whole thing in water and let the supports", "to remove the yellow ABS supports from a black ABS", "ABS supports from a black ABS model. [![Yellow ABS supports", "with ABS supports, followed by dissolution of ABS with acetone,", "are very difficult to remove (physically) when I print with", "followed by dissolution of ABS with acetone, is my best", "to remove (physically) when I print with ABS. The image", "significant effort to remove the yellow ABS supports from a", "print the model with ABS or PLA and the supports", "water and let the supports dissolve. I've considered other options", "print with ABS. The image below, from [Thingiverse - MOF-5", "ABS supports removed from black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned about", "you can print the model with ABS or PLA and", "from [Thingiverse - MOF-5 unit cell](https://www.thingiverse.com/thing:1613957), is after significant effort", "very difficult to remove (physically) when I print with ABS.", "Doing a PLA print with ABS supports, followed by dissolution", "since PVA is ~4x more expensive than ABS. Doing a", "supports removed from black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned about polyvinylalcohol", "great option for dual-extruder printers, where you can print the", "(PVA) as a 3D-printing filament which is soluble in water.", "thing in water and let the supports dissolve. I've considered", "when I print with ABS. The image below, from [Thingiverse", "below, from [Thingiverse - MOF-5 unit cell](https://www.thingiverse.com/thing:1613957), is after significant" ]
[ "Printer. On the Cura \"Machine>Machine Settings...\" menu, what are the", "online before posting this question, this printer may be physically", "this printer may be physically the same as the WanHao", "Plus 3D Printer. On the Cura \"Machine>Machine Settings...\" menu, what", "Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1: I'm particularly concerned that I got the", "10 mm to my settings because I was concerned that", "width of the raft that I usually use when I", "I got the min and max directions correct. For instance,", "may be physically the same as the WanHao Duplicator i3.", "2: From what I've read online before posting this question,", "I print. Note 2: From what I've read online before", "for \"Printer head size\" in the upper right quadrant? My", "use when I print. Note 2: From what I've read", "when I print. Note 2: From what I've read online", "this question, this printer may be physically the same as", "was concerned that Cura wasn't accounting for the width of", "directions correct. For instance, I just swapped my Y min", "other way, the print head impacted the first object when", "print head impacted the first object when printing the second.", "and max directions correct. For instance, I just swapped my", "the Cura \"Machine>Machine Settings...\" menu, what are the correct settings", "the min and max directions correct. For instance, I just", "max values because when I tried them the other way,", "I was concerned that Cura wasn't accounting for the width", "Y min and Y max values because when I tried", "size\" in the upper right quadrant? My best guess is", "just swapped my Y min and Y max values because", "in the upper right quadrant? My best guess is below:", "when printing the second. Note 1.5: I added 10 mm", "On the Cura \"Machine>Machine Settings...\" menu, what are the correct", "particularly concerned that I got the min and max directions", "in a single G-code file on my Maker Select Plus", "the upper right quadrant? My best guess is below: [![Machine", "upper right quadrant? My best guess is below: [![Machine Settings", "best guess is below: [![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1: I'm", "concerned that I got the min and max directions correct.", "1.5: I added 10 mm to my settings because I", "posting this question, this printer may be physically the same", "read online before posting this question, this printer may be", "max directions correct. For instance, I just swapped my Y", "raft that I usually use when I print. Note 2:", "printer may be physically the same as the WanHao Duplicator", "the second. Note 1.5: I added 10 mm to my", "and Y max values because when I tried them the", "instance, I just swapped my Y min and Y max", "way, the print head impacted the first object when printing", "mm to my settings because I was concerned that Cura", "I want to print multiple objects in a single G-code", "I'm particularly concerned that I got the min and max", "what I've read online before posting this question, this printer", "added 10 mm to my settings because I was concerned", "Note 2: From what I've read online before posting this", "G-code file on my Maker Select Plus 3D Printer. On", "that I usually use when I print. Note 2: From", "Note 1: I'm particularly concerned that I got the min", "Note 1.5: I added 10 mm to my settings because", "multiple objects in a single G-code file on my Maker", "are the correct settings for \"Printer head size\" in the", "settings for \"Printer head size\" in the upper right quadrant?", "to print multiple objects in a single G-code file on", "swapped my Y min and Y max values because when", "From what I've read online before posting this question, this", "objects in a single G-code file on my Maker Select", "is below: [![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1: I'm particularly concerned", "For instance, I just swapped my Y min and Y", "settings because I was concerned that Cura wasn't accounting for", "menu, what are the correct settings for \"Printer head size\"", "head size\" in the upper right quadrant? My best guess", "correct settings for \"Printer head size\" in the upper right", "before posting this question, this printer may be physically the", "print. Note 2: From what I've read online before posting", "that Cura wasn't accounting for the width of the raft", "of the raft that I usually use when I print.", "quadrant? My best guess is below: [![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note", "file on my Maker Select Plus 3D Printer. On the", "Cura \"Machine>Machine Settings...\" menu, what are the correct settings for", "guess is below: [![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1: I'm particularly", "object when printing the second. Note 1.5: I added 10", "second. Note 1.5: I added 10 mm to my settings", "Settings...\" menu, what are the correct settings for \"Printer head", "Y max values because when I tried them the other", "\"Machine>Machine Settings...\" menu, what are the correct settings for \"Printer", "below: [![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1: I'm particularly concerned that", "for the width of the raft that I usually use", "single G-code file on my Maker Select Plus 3D Printer.", "the print head impacted the first object when printing the", "question, this printer may be physically the same as the", "min and Y max values because when I tried them", "I just swapped my Y min and Y max values", "want to print multiple objects in a single G-code file", "because I was concerned that Cura wasn't accounting for the", "right quadrant? My best guess is below: [![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png)", "the other way, the print head impacted the first object", "print multiple objects in a single G-code file on my", "Select Plus 3D Printer. On the Cura \"Machine>Machine Settings...\" menu,", "what are the correct settings for \"Printer head size\" in", "first object when printing the second. Note 1.5: I added", "to my settings because I was concerned that Cura wasn't", "my settings because I was concerned that Cura wasn't accounting", "the correct settings for \"Printer head size\" in the upper", "Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1: I'm particularly concerned that I got", "usually use when I print. Note 2: From what I've", "values because when I tried them the other way, the", "the raft that I usually use when I print. Note", "\"Printer head size\" in the upper right quadrant? My best", "I added 10 mm to my settings because I was", "wasn't accounting for the width of the raft that I", "them the other way, the print head impacted the first", "when I tried them the other way, the print head", "[![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1: I'm particularly concerned that I", "tried them the other way, the print head impacted the", "my Maker Select Plus 3D Printer. On the Cura \"Machine>Machine", "I tried them the other way, the print head impacted", "accounting for the width of the raft that I usually", "correct. For instance, I just swapped my Y min and", "my Y min and Y max values because when I", "Cura wasn't accounting for the width of the raft that", "3D Printer. On the Cura \"Machine>Machine Settings...\" menu, what are", "that I got the min and max directions correct. For", "I usually use when I print. Note 2: From what", "because when I tried them the other way, the print", "the first object when printing the second. Note 1.5: I", "concerned that Cura wasn't accounting for the width of the", "printing the second. Note 1.5: I added 10 mm to", "Maker Select Plus 3D Printer. On the Cura \"Machine>Machine Settings...\"", "My best guess is below: [![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1:", "impacted the first object when printing the second. Note 1.5:", "the width of the raft that I usually use when", "1: I'm particularly concerned that I got the min and", "min and max directions correct. For instance, I just swapped", "a single G-code file on my Maker Select Plus 3D", "got the min and max directions correct. For instance, I", "I've read online before posting this question, this printer may", "on my Maker Select Plus 3D Printer. On the Cura", "head impacted the first object when printing the second. Note" ]
[ "increase the solid top layer count helps to get a", "left bunny is sliced with Slic3r 1.2.9.99. The top right", "both Cura and Slic3r are: * 0.4 mm nozzel; ", "gaps that I cannot get fixed. The perimeters of successive", "layer count helps to get a closed surface. But then", "nozzel; 0.2 mm layer height; * No infill; ", "top layer count helps to get a closed surface. But", "sliced with Cura 2.5. Take a closer look at the", "sliced with Slic3r 1.2.9.99. The top right bunny is sliced", "infill; 2 perimeter walls, and; * 3 solid top/bottom", "then everything gets stiffer. The bunnies are printed with nylon", "No infill; * 2 perimeter walls, and; * 3 solid", "a bit squishy. [![Cura and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer settings", "at the forehead and the back of the bottom left", "squishy. [![Cura and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer settings in both", "closer look at the forehead and the back of the", "helps to get a closed surface. But then everything gets", "the gaps. The bottom left bunny is sliced with Slic3r", "What am I missing? So far only adding infill and", "in both Cura and Slic3r are: * 0.4 mm nozzel;", "to cover the gaps. The bottom left bunny is sliced", "2.5. Take a closer look at the forehead and the", "a hollow object using Slic3r. On flat slopes on top,", "Slic3r are: * 0.4 mm nozzel; * 0.2 mm layer", "however adds filament to cover the gaps. The bottom left", "and Slic3r are: * 0.4 mm nozzel; * 0.2 mm", "they are a bit squishy. [![Cura and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The", "needed\" turned on. But turning it off makes no difference.", "But turning it off makes no difference. What am I", "are a bit squishy. [![Cura and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer", "height; * No infill; * 2 perimeter walls, and; ", "if needed\" turned on. But turning it off makes no", "bottom left bunny. I have \"extra perimeters if needed\" turned", "makes no difference. What am I missing? So far only", "with Slic3r 1.2.9.99. The top right bunny is sliced with", "bit squishy. [![Cura and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer settings in", "hollow object using Slic3r. On flat slopes on top, there", "Take a closer look at the forehead and the back", "a closer look at the forehead and the back of", "The top right bunny is sliced with Cura 2.5. Take", "using Slic3r. On flat slopes on top, there are gaps", "surface. But then everything gets stiffer. The bunnies are printed", "mm layer height; No infill; * 2 perimeter walls,", "mm nozzel; * 0.2 mm layer height; * No infill;", "closed surface. But then everything gets stiffer. The bunnies are", "of the bottom left bunny. I have \"extra perimeters if", "On flat slopes on top, there are gaps that I", "fixed. The perimeters of successive layers just don't cover each", "bunny is sliced with Slic3r 1.2.9.99. The top right bunny", "count helps to get a closed surface. But then everything", "The perimeters of successive layers just don't cover each other.", "successive layers just don't cover each other. Cura however adds", "The bottom left bunny is sliced with Slic3r 1.2.9.99. The", "adds filament to cover the gaps. The bottom left bunny", "other. Cura however adds filament to cover the gaps. The", "the back of the bottom left bunny. I have \"extra", "bottom left bunny is sliced with Slic3r 1.2.9.99. The top", "the solid top layer count helps to get a closed", "nylon so they are a bit squishy. [![Cura and Slic3r", "have \"extra perimeters if needed\" turned on. But turning it", "the forehead and the back of the bottom left bunny.", "Cura 2.5. Take a closer look at the forehead and", "and increase the solid top layer count helps to get", "adding infill and increase the solid top layer count helps", "so they are a bit squishy. [![Cura and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg)", "get fixed. The perimeters of successive layers just don't cover", "and the back of the bottom left bunny. I have", "are: * 0.4 mm nozzel; * 0.2 mm layer height;", "trouble printing a hollow object using Slic3r. On flat slopes", "having trouble printing a hollow object using Slic3r. On flat", "forehead and the back of the bottom left bunny. I", "[![Cura and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer settings in both Cura", "perimeters of successive layers just don't cover each other. Cura", "of successive layers just don't cover each other. Cura however", "that I cannot get fixed. The perimeters of successive layers", "look at the forehead and the back of the bottom", "layers just don't cover each other. Cura however adds filament", "top right bunny is sliced with Cura 2.5. Take a", "each other. Cura however adds filament to cover the gaps.", "bunny. I have \"extra perimeters if needed\" turned on. But", "object using Slic3r. On flat slopes on top, there are", "turned on. But turning it off makes no difference. What", "I have \"extra perimeters if needed\" turned on. But turning", "Cura however adds filament to cover the gaps. The bottom", "it off makes no difference. What am I missing? So", "cannot get fixed. The perimeters of successive layers just don't", "and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer settings in both Cura and", "difference. What am I missing? So far only adding infill", "am having trouble printing a hollow object using Slic3r. On", "* 2 perimeter walls, and; * 3 solid top/bottom layers.", "the bottom left bunny. I have \"extra perimeters if needed\"", "flat slopes on top, there are gaps that I cannot", "gets stiffer. The bunnies are printed with nylon so they", "stiffer. The bunnies are printed with nylon so they are", "slopes on top, there are gaps that I cannot get", "printing a hollow object using Slic3r. On flat slopes on", "\"extra perimeters if needed\" turned on. But turning it off", "is sliced with Cura 2.5. Take a closer look at", "I cannot get fixed. The perimeters of successive layers just", "I am having trouble printing a hollow object using Slic3r.", "with Cura 2.5. Take a closer look at the forehead", "no difference. What am I missing? So far only adding", "with nylon so they are a bit squishy. [![Cura and", "gaps. The bottom left bunny is sliced with Slic3r 1.2.9.99.", "am I missing? So far only adding infill and increase", "Slic3r. On flat slopes on top, there are gaps that", "left bunny. I have \"extra perimeters if needed\" turned on.", "infill and increase the solid top layer count helps to", "Slic3r 1.2.9.99. The top right bunny is sliced with Cura", "to get a closed surface. But then everything gets stiffer.", "far only adding infill and increase the solid top layer", "1.2.9.99. The top right bunny is sliced with Cura 2.5.", "printed with nylon so they are a bit squishy. [![Cura", "on top, there are gaps that I cannot get fixed.", "I missing? So far only adding infill and increase the", "0.2 mm layer height; * No infill; * 2 perimeter", "layer height; * No infill; * 2 perimeter walls, and;", "printer settings in both Cura and Slic3r are: * 0.4", "settings in both Cura and Slic3r are: * 0.4 mm", "solid top layer count helps to get a closed surface.", "Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer settings in both Cura and Slic3r are:", "turning it off makes no difference. What am I missing?", "* 0.2 mm layer height; * No infill; * 2", "a closed surface. But then everything gets stiffer. The bunnies", "bunnies are printed with nylon so they are a bit", "cover the gaps. The bottom left bunny is sliced with", "Cura and Slic3r are: * 0.4 mm nozzel; * 0.2", "cover each other. Cura however adds filament to cover the", "right bunny is sliced with Cura 2.5. Take a closer", "are printed with nylon so they are a bit squishy.", "there are gaps that I cannot get fixed. The perimeters", "But then everything gets stiffer. The bunnies are printed with", "everything gets stiffer. The bunnies are printed with nylon so", "* 0.4 mm nozzel; * 0.2 mm layer height; ", "top, there are gaps that I cannot get fixed. The", " No infill; * 2 perimeter walls, and; * 3", "just don't cover each other. Cura however adds filament to", "0.4 mm nozzel; * 0.2 mm layer height; * No", "don't cover each other. Cura however adds filament to cover", "filament to cover the gaps. The bottom left bunny is", "on. But turning it off makes no difference. What am", "missing? So far only adding infill and increase the solid", "Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer settings in both Cura and Slic3r", "off makes no difference. What am I missing? So far", "are gaps that I cannot get fixed. The perimeters of", "The printer settings in both Cura and Slic3r are: *", "The bunnies are printed with nylon so they are a", "So far only adding infill and increase the solid top", "only adding infill and increase the solid top layer count", "get a closed surface. But then everything gets stiffer. The", "back of the bottom left bunny. I have \"extra perimeters", "is sliced with Slic3r 1.2.9.99. The top right bunny is", "perimeters if needed\" turned on. But turning it off makes", "bunny is sliced with Cura 2.5. Take a closer look" ]
[ "the wire 'eats' (read breaks, but not entirely) the plastic", "feeding correctly into our Ultimaker 2+ It starts to feed", "below: [![Photo of damaged filament](https://i.stack.imgur.com/OnQy7.jpg)](https://i.stack.imgur.com/OnQy7.jpg) Any hints are more than", "got the following PLA filament that is not feeding correctly", "correctly into our Ultimaker 2+ It starts to feed and", "picture below: [![Photo of damaged filament](https://i.stack.imgur.com/OnQy7.jpg)](https://i.stack.imgur.com/OnQy7.jpg) Any hints are more", "to feed and then all of the sudden, the wire", "is not feeding correctly into our Ultimaker 2+ It starts", "(read breaks, but not entirely) the plastic filament as you", "not feeding correctly into our Ultimaker 2+ It starts to", "entirely) the plastic filament as you can see on the", "plastic filament as you can see on the picture below:", "feed and then all of the sudden, the wire 'eats'", "then all of the sudden, the wire 'eats' (read breaks,", "sudden, the wire 'eats' (read breaks, but not entirely) the", "Ultimaker 2+ It starts to feed and then all of", "but not entirely) the plastic filament as you can see", "see on the picture below: [![Photo of damaged filament](https://i.stack.imgur.com/OnQy7.jpg)](https://i.stack.imgur.com/OnQy7.jpg) Any", "the picture below: [![Photo of damaged filament](https://i.stack.imgur.com/OnQy7.jpg)](https://i.stack.imgur.com/OnQy7.jpg) Any hints are", "the plastic filament as you can see on the picture", "It starts to feed and then all of the sudden,", "breaks, but not entirely) the plastic filament as you can", "all of the sudden, the wire 'eats' (read breaks, but", "2+ It starts to feed and then all of the", "not entirely) the plastic filament as you can see on", "can see on the picture below: [![Photo of damaged filament](https://i.stack.imgur.com/OnQy7.jpg)](https://i.stack.imgur.com/OnQy7.jpg)", "into our Ultimaker 2+ It starts to feed and then", "'eats' (read breaks, but not entirely) the plastic filament as", "following PLA filament that is not feeding correctly into our", "I've got the following PLA filament that is not feeding", "filament that is not feeding correctly into our Ultimaker 2+", "wire 'eats' (read breaks, but not entirely) the plastic filament", "the sudden, the wire 'eats' (read breaks, but not entirely)", "our Ultimaker 2+ It starts to feed and then all", "as you can see on the picture below: [![Photo of", "[![Photo of damaged filament](https://i.stack.imgur.com/OnQy7.jpg)](https://i.stack.imgur.com/OnQy7.jpg) Any hints are more than welcomed.", "you can see on the picture below: [![Photo of damaged", "the following PLA filament that is not feeding correctly into", "filament as you can see on the picture below: [![Photo", "on the picture below: [![Photo of damaged filament](https://i.stack.imgur.com/OnQy7.jpg)](https://i.stack.imgur.com/OnQy7.jpg) Any hints", "and then all of the sudden, the wire 'eats' (read", "of the sudden, the wire 'eats' (read breaks, but not", "PLA filament that is not feeding correctly into our Ultimaker", "that is not feeding correctly into our Ultimaker 2+ It", "starts to feed and then all of the sudden, the" ]
[ "laser cutters,plasma cutters and CNC router.SO, this is not a", "I couldn't find good answer. One of my friends told", "for this community. This also not directly related with 3D", "(Milling) mostly use servo motors and CNC laser cutter and", "this and I couldn't find good answer. One of my", "steppers. I think position controlling is more important in laser", "controlling is more important in laser and plasma cutters than", "find good answer. One of my friends told me CNC", "printing and CNC routing.And also, This question asked for more", "routing.And also, This question asked for more reason for why", "has more area than 3D printing and CNC routing.And also,", "searched about this and I couldn't find good answer. One", "answer. One of my friends told me CNC machining centers", "cutter and plasma cutters use stepper motors mostly. Position controlling", "stepper motors mostly. Position controlling is more accurate in servo", "use stepper motors. Why do laser and plasma cutters use", "than 3D printing and CNC routing.And also, This question asked", "CNC machining centers (Milling) mostly use servo motors and CNC", "also not directly related with 3D printing. I searched about", "plasma cutters use stepper motors mostly. Position controlling is more", "related with 3D printing. I searched about this and I", "and CNC laser cutter and plasma cutters use stepper motors", "than steppers. I think position controlling is more important in", "directly related with 3D printing. I searched about this and", "cutters than CNC machining centers, but laser and plasma cutters", "motors mostly. Position controlling is more accurate in servo motors", "cutters and CNC router.SO, this is not a duplicate of", "question asked for more reason for why use steppers in", "not directly related with 3D printing. I searched about this", "area than 3D printing and CNC routing.And also, This question", "important in laser and plasma cutters than CNC machining centers,", "for why use steppers in laser cutters,plasma cutters and CNC", "in laser cutters,plasma cutters and CNC router.SO, this is not", "CNC router.SO, this is not a duplicate of [this](https://3dprinting.stackexchange.com/questions/3842/reprap-variants-with-servo-motors-rather-than-stepper-motors) one.", "laser cutter and plasma cutters use stepper motors mostly. Position", "couldn't find good answer. One of my friends told me", "laser and plasma cutters use stepper motors. Why do laser", "reason for why use steppers in laser cutters,plasma cutters and", "in servo motors than steppers. I think position controlling is", "This also not directly related with 3D printing. I searched", "centers (Milling) mostly use servo motors and CNC laser cutter", "mostly use servo motors and CNC laser cutter and plasma", "told me CNC machining centers (Milling) mostly use servo motors", "my friends told me CNC machining centers (Milling) mostly use", "mostly. Position controlling is more accurate in servo motors than", "position controlling is more important in laser and plasma cutters", "steppers in laser cutters,plasma cutters and CNC router.SO, this is", "and plasma cutters than CNC machining centers, but laser and", "cutters use steppers without using servo motors? P.S. This question", "and I couldn't find good answer. One of my friends", "of my friends told me CNC machining centers (Milling) mostly", "3D printing and CNC routing.And also, This question asked for", "more reason for why use steppers in laser cutters,plasma cutters", "using servo motors? P.S. This question has more area than", "is more important in laser and plasma cutters than CNC", "without using servo motors? P.S. This question has more area", "use steppers in laser cutters,plasma cutters and CNC router.SO, this", "than CNC machining centers, but laser and plasma cutters use", "and CNC routing.And also, This question asked for more reason", "laser and plasma cutters than CNC machining centers, but laser", "stepper motors. Why do laser and plasma cutters use steppers", "accurate in servo motors than steppers. I think position controlling", "printing. I searched about this and I couldn't find good", "Why do laser and plasma cutters use steppers without using", "3D printing. I searched about this and I couldn't find", "One of my friends told me CNC machining centers (Milling)", "asked for more reason for why use steppers in laser", "and CNC router.SO, this is not a duplicate of [this](https://3dprinting.stackexchange.com/questions/3842/reprap-variants-with-servo-motors-rather-than-stepper-motors)", "CNC routing.And also, This question asked for more reason for", "a new one for this community. This also not directly", "servo motors and CNC laser cutter and plasma cutters use", "CNC laser cutter and plasma cutters use stepper motors mostly.", "one for this community. This also not directly related with", "steppers without using servo motors? P.S. This question has more", "P.S. This question has more area than 3D printing and", "do laser and plasma cutters use steppers without using servo", "think position controlling is more important in laser and plasma", "community. This also not directly related with 3D printing. I", "controlling is more accurate in servo motors than steppers. I", "for more reason for why use steppers in laser cutters,plasma", "centers, but laser and plasma cutters use stepper motors. Why", "motors. Why do laser and plasma cutters use steppers without", "also, This question asked for more reason for why use", "I searched about this and I couldn't find good answer.", "question has more area than 3D printing and CNC routing.And", "use steppers without using servo motors? P.S. This question has", "new one for this community. This also not directly related", "machining centers, but laser and plasma cutters use stepper motors.", "I'm a new one for this community. This also not", "laser and plasma cutters use steppers without using servo motors?", "I think position controlling is more important in laser and", "me CNC machining centers (Milling) mostly use servo motors and", "and plasma cutters use stepper motors mostly. Position controlling is", "more accurate in servo motors than steppers. I think position", "and plasma cutters use steppers without using servo motors? P.S.", "this community. This also not directly related with 3D printing.", "plasma cutters than CNC machining centers, but laser and plasma", "servo motors than steppers. I think position controlling is more", "Position controlling is more accurate in servo motors than steppers.", "servo motors? P.S. This question has more area than 3D", "but laser and plasma cutters use stepper motors. Why do", "machining centers (Milling) mostly use servo motors and CNC laser", "use stepper motors mostly. Position controlling is more accurate in", "CNC machining centers, but laser and plasma cutters use stepper", "This question has more area than 3D printing and CNC", "more area than 3D printing and CNC routing.And also, This", "cutters,plasma cutters and CNC router.SO, this is not a duplicate", "with 3D printing. I searched about this and I couldn't", "motors than steppers. I think position controlling is more important", "and plasma cutters use stepper motors. Why do laser and", "why use steppers in laser cutters,plasma cutters and CNC router.SO,", "more important in laser and plasma cutters than CNC machining", "plasma cutters use stepper motors. Why do laser and plasma", "plasma cutters use steppers without using servo motors? P.S. This", "use servo motors and CNC laser cutter and plasma cutters", "cutters use stepper motors. Why do laser and plasma cutters", "about this and I couldn't find good answer. One of", "in laser and plasma cutters than CNC machining centers, but", "This question asked for more reason for why use steppers", "is more accurate in servo motors than steppers. I think", "motors and CNC laser cutter and plasma cutters use stepper", "friends told me CNC machining centers (Milling) mostly use servo", "motors? P.S. This question has more area than 3D printing", "good answer. One of my friends told me CNC machining", "cutters use stepper motors mostly. Position controlling is more accurate" ]
[ "LCD menu (without a computer connected), it only goes down,", "finished building a Tronxy P802M Prusa i3. When I try", "try to move the Z-axis, using the hardware buttons in", "building a Tronxy P802M Prusa i3. When I try to", "to move the Z-axis, using the hardware buttons in the", "Tronxy P802M Prusa i3. When I try to move the", "in the LCD menu (without a computer connected), it only", "(without a computer connected), it only goes down, when I", "the hardware buttons in the LCD menu (without a computer", "computer connected), it only goes down, when I both increase,", "When I try to move the Z-axis, using the hardware", "the LCD menu (without a computer connected), it only goes", "a computer connected), it only goes down, when I both", "just finished building a Tronxy P802M Prusa i3. When I", "i3. When I try to move the Z-axis, using the", "move the Z-axis, using the hardware buttons in the LCD", "using the hardware buttons in the LCD menu (without a", "a Tronxy P802M Prusa i3. When I try to move", "down, when I both increase, and decrease, the value of", "goes down, when I both increase, and decrease, the value", "both increase, and decrease, the value of Z. Any suggestions?", "buttons in the LCD menu (without a computer connected), it", "Prusa i3. When I try to move the Z-axis, using", "the Z-axis, using the hardware buttons in the LCD menu", "menu (without a computer connected), it only goes down, when", "I have just finished building a Tronxy P802M Prusa i3.", "Z-axis, using the hardware buttons in the LCD menu (without", "I try to move the Z-axis, using the hardware buttons", "hardware buttons in the LCD menu (without a computer connected),", "connected), it only goes down, when I both increase, and", "have just finished building a Tronxy P802M Prusa i3. When", "when I both increase, and decrease, the value of Z.", "only goes down, when I both increase, and decrease, the", "it only goes down, when I both increase, and decrease,", "P802M Prusa i3. When I try to move the Z-axis,", "I both increase, and decrease, the value of Z. Any" ]
[ "[![Screenshot of Cura, depicting large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't seem", "better: [![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a bit of dup of", "of Cura, depicting large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't seem to", "seem to tweak the stuff under machine settings to anything", "settings to anything that does this better: [![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png)", "I can't seem to understand the margins that Cura uses", "that Cura uses or how to fix them for my", "Look at this: [![Screenshot of Cura, depicting large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png)", "does this better: [![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a bit of", "anything that does this better: [![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a", "I can't seem to tweak the stuff under machine settings", "of dup of [Cura not allowing full print area to", "margins that Cura uses or how to fix them for", "how to fix them for my machine. Look at this:", "them for my machine. Look at this: [![Screenshot of Cura,", "to fix them for my machine. Look at this: [![Screenshot", "to understand the margins that Cura uses or how to", "understand the margins that Cura uses or how to fix", "depicting large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't seem to tweak the", "for my machine. Look at this: [![Screenshot of Cura, depicting", "I think my case is a lot worse and can't", "fix them for my machine. Look at this: [![Screenshot of", "used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I think my case is a lot worse", "area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I think my case is a", "my machine. Look at this: [![Screenshot of Cura, depicting large", "my case is a lot worse and can't be explained", "uses or how to fix them for my machine. Look", "[Cura not allowing full print area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I", "machine. Look at this: [![Screenshot of Cura, depicting large grey", "case is a lot worse and can't be explained by", "stuff under machine settings to anything that does this better:", "full print area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I think my case", "Maybe a bit of dup of [Cura not allowing full", "[![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a bit of dup of [Cura", "bit of dup of [Cura not allowing full print area", "but I think my case is a lot worse and", "Cura uses or how to fix them for my machine.", "not allowing full print area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I think", "dup of [Cura not allowing full print area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used),", "think my case is a lot worse and can't be", "of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a bit of dup of [Cura not", "allowing full print area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I think my", "can't seem to understand the margins that Cura uses or", "seem to understand the margins that Cura uses or how", "area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't seem to tweak the stuff under machine", "is a lot worse and can't be explained by skirts.", "grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't seem to tweak the stuff under", "that does this better: [![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a bit", "settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a bit of dup of [Cura not allowing", "can't seem to tweak the stuff under machine settings to", "tweak the stuff under machine settings to anything that does", "to anything that does this better: [![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe", "Cura, depicting large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't seem to tweak", "machine settings to anything that does this better: [![Screenshot of", "this: [![Screenshot of Cura, depicting large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't", "or how to fix them for my machine. Look at", "the margins that Cura uses or how to fix them", "large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't seem to tweak the stuff", "of [Cura not allowing full print area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but", "at this: [![Screenshot of Cura, depicting large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I", "the stuff under machine settings to anything that does this", "under machine settings to anything that does this better: [![Screenshot", "a bit of dup of [Cura not allowing full print", "this better: [![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a bit of dup", "to tweak the stuff under machine settings to anything that", "to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I think my case is a lot", "print area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I think my case is" ]
[ "X, Y, Z position from the printer to the computer", "I have a wooden first generation Replicator with dual extruders", "printer to the computer in real time. Is that even", "software. Please let me know if you need any extra", "wooden first generation Replicator with dual extruders and I'm trying", "a wooden first generation Replicator with dual extruders and I'm", "real time. Is that even possible? The firmware used by", "possible? The firmware used by the replicator is version 5.5", "is version 5.5 I believe, and I've been doing tests", "dual extruders and I'm trying to get an X, Y,", "doing tests with ReplicatorG but I'm not married to that", "even possible? The firmware used by the replicator is version", "know if you need any extra info before being able", "computer in real time. Is that even possible? The firmware", "I've been doing tests with ReplicatorG but I'm not married", "that even possible? The firmware used by the replicator is", "Please let me know if you need any extra info", "to the computer in real time. Is that even possible?", "the computer in real time. Is that even possible? The", "firmware used by the replicator is version 5.5 I believe,", "I believe, and I've been doing tests with ReplicatorG but", "by the replicator is version 5.5 I believe, and I've", "Z position from the printer to the computer in real", "used by the replicator is version 5.5 I believe, and", "to get an X, Y, Z position from the printer", "tests with ReplicatorG but I'm not married to that software.", "Is that even possible? The firmware used by the replicator", "and I'm trying to get an X, Y, Z position", "get an X, Y, Z position from the printer to", "the printer to the computer in real time. Is that", "you need any extra info before being able to comment", "me know if you need any extra info before being", "an X, Y, Z position from the printer to the", "been doing tests with ReplicatorG but I'm not married to", "5.5 I believe, and I've been doing tests with ReplicatorG", "Y, Z position from the printer to the computer in", "not married to that software. Please let me know if", "that software. Please let me know if you need any", "in real time. Is that even possible? The firmware used", "version 5.5 I believe, and I've been doing tests with", "have a wooden first generation Replicator with dual extruders and", "need any extra info before being able to comment on", "and I've been doing tests with ReplicatorG but I'm not", "time. Is that even possible? The firmware used by the", "believe, and I've been doing tests with ReplicatorG but I'm", "married to that software. Please let me know if you", "with ReplicatorG but I'm not married to that software. Please", "Replicator with dual extruders and I'm trying to get an", "first generation Replicator with dual extruders and I'm trying to", "generation Replicator with dual extruders and I'm trying to get", "from the printer to the computer in real time. Is", "to that software. Please let me know if you need", "let me know if you need any extra info before", "trying to get an X, Y, Z position from the", "ReplicatorG but I'm not married to that software. Please let", "if you need any extra info before being able to", "I'm not married to that software. Please let me know", "The firmware used by the replicator is version 5.5 I", "the replicator is version 5.5 I believe, and I've been", "position from the printer to the computer in real time.", "I'm trying to get an X, Y, Z position from", "but I'm not married to that software. Please let me", "any extra info before being able to comment on this...", "with dual extruders and I'm trying to get an X,", "extruders and I'm trying to get an X, Y, Z", "replicator is version 5.5 I believe, and I've been doing" ]
[ "use a lot of retraction. My retraction settings are 40mm/s", "as this section it was printing had to use a", "slow speed (around 55mm/s), and I'm sure confused on why", "what is happening and how to fix it it will", "Anycubic Delta linear printer with a Bowden extruder, I use", "fix it it will be gladly appreciated! I have an", "why it's not extruding properly at certain times. If anyone", "as the layers of the print were not full layers", "I use white 1.75 mm PLA at 200C, .4mm nozzle", "section it was printing had to use a lot of", "were not full layers and looked very stringy. Here's a", "cancel as the layers of the print were not full", "it may be because of my retraction settings either being", "be because of my retraction settings either being too high", "on why it's not extruding properly at certain times. If", "Here's a couple pictures of what it looked like. [![enter", "My retraction settings are 40mm/s for 4.5mm. I was printing", "it's not extruding properly at certain times. If anyone has", "is happening and how to fix it it will be", "a Bowden extruder, I use white 1.75 mm PLA at", "certain times. If anyone has any idea on what is", "(around 55mm/s), and I'm sure confused on why it's not", "it will be gladly appreciated! I have an Anycubic Delta", "stringy. Here's a couple pictures of what it looked like.", "and looked very stringy. Here's a couple pictures of what", "be gladly appreciated! I have an Anycubic Delta linear printer", "have an Anycubic Delta linear printer with a Bowden extruder,", "retraction settings are 40mm/s for 4.5mm. I was printing at", "confused on why it's not extruding properly at certain times.", "printer with a Bowden extruder, I use white 1.75 mm", "appreciated! I have an Anycubic Delta linear printer with a", "layers of the print were not full layers and looked", "print I had to cancel as the layers of the", "the print were not full layers and looked very stringy.", "4.5mm. I was printing at a pretty slow speed (around", "large print I had to cancel as the layers of", "looked like. [![enter image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg)", "description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have a feeling", "30% into a large print I had to cancel as", "print were not full layers and looked very stringy. Here's", "has any idea on what is happening and how to", "how to fix it it will be gladly appreciated! I", "sure confused on why it's not extruding properly at certain", "printing had to use a lot of retraction. My retraction", "fast as this section it was printing had to use", "image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have a feeling that it may", "that it may be because of my retraction settings either", "high or too fast as this section it was printing", "I have a feeling that it may be because of", "I'm sure confused on why it's not extruding properly at", "description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have a feeling that it may be", "either being too high or too fast as this section", "full layers and looked very stringy. Here's a couple pictures", "retraction settings either being too high or too fast as", "not full layers and looked very stringy. Here's a couple", "anyone has any idea on what is happening and how", "40mm/s for 4.5mm. I was printing at a pretty slow", "and I'm sure confused on why it's not extruding properly", "it it will be gladly appreciated! I have an Anycubic", "may be because of my retraction settings either being too", "this section it was printing had to use a lot", "too fast as this section it was printing had to", "to cancel as the layers of the print were not", "couple pictures of what it looked like. [![enter image description", "the layers of the print were not full layers and", "not extruding properly at certain times. If anyone has any", "have a feeling that it may be because of my", "what it looked like. [![enter image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image", "too high or too fast as this section it was", "extruder, I use white 1.75 mm PLA at 200C, .4mm", "of my retraction settings either being too high or too", "pictures of what it looked like. [![enter image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg)", "[![enter image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have", "of retraction. My retraction settings are 40mm/s for 4.5mm. I", "on what is happening and how to fix it it", "extruding properly at certain times. If anyone has any idea", "lot of retraction. My retraction settings are 40mm/s for 4.5mm.", "any idea on what is happening and how to fix", "55mm/s), and I'm sure confused on why it's not extruding", "image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have a", "had to use a lot of retraction. My retraction settings", "I was printing at a pretty slow speed (around 55mm/s),", "here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have a feeling that", "for 4.5mm. I was printing at a pretty slow speed", "a pretty slow speed (around 55mm/s), and I'm sure confused", "or too fast as this section it was printing had", "here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have a feeling that it may be because", "at a pretty slow speed (around 55mm/s), and I'm sure", "of the print were not full layers and looked very", "happening and how to fix it it will be gladly", "to fix it it will be gladly appreciated! I have", "Around 30% into a large print I had to cancel", "very stringy. Here's a couple pictures of what it looked", "are 40mm/s for 4.5mm. I was printing at a pretty", "it looked like. [![enter image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image description", "layers and looked very stringy. Here's a couple pictures of", "printing at a pretty slow speed (around 55mm/s), and I'm", "Delta linear printer with a Bowden extruder, I use white", "at certain times. If anyone has any idea on what", "of what it looked like. [![enter image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter", "being too high or too fast as this section it", "If anyone has any idea on what is happening and", "because of my retraction settings either being too high or", "[![enter image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have a feeling that it", "settings either being too high or too fast as this", "like. [![enter image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I", "was printing at a pretty slow speed (around 55mm/s), and", "a lot of retraction. My retraction settings are 40mm/s for", "to use a lot of retraction. My retraction settings are", "had to cancel as the layers of the print were", "it was printing had to use a lot of retraction.", "idea on what is happening and how to fix it", "I have an Anycubic Delta linear printer with a Bowden", "feeling that it may be because of my retraction settings", "will be gladly appreciated! I have an Anycubic Delta linear", "into a large print I had to cancel as the", "properly at certain times. If anyone has any idea on", "an Anycubic Delta linear printer with a Bowden extruder, I", "gladly appreciated! I have an Anycubic Delta linear printer with", "my retraction settings either being too high or too fast", "Bowden extruder, I use white 1.75 mm PLA at 200C,", "a feeling that it may be because of my retraction", "pretty slow speed (around 55mm/s), and I'm sure confused on", "and how to fix it it will be gladly appreciated!", "times. If anyone has any idea on what is happening", "retraction. My retraction settings are 40mm/s for 4.5mm. I was", "I had to cancel as the layers of the print", "linear printer with a Bowden extruder, I use white 1.75", "looked very stringy. Here's a couple pictures of what it", "speed (around 55mm/s), and I'm sure confused on why it's", "was printing had to use a lot of retraction. My", "a large print I had to cancel as the layers", "with a Bowden extruder, I use white 1.75 mm PLA", "settings are 40mm/s for 4.5mm. I was printing at a", "a couple pictures of what it looked like. [![enter image" ]
[ "there is no list contained therein, nor contains details about", "2020 extrusion in Bangkok). Combine that with the fact that", "complete list of fasteners (bolts, nuts and washers) for the", "for the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because I purchased only the", "The Sintron uses the PCB mounted mechanical switches (with four", "no avail; * Read the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states only", "but not had an answer; * Obtained the [Sintron build", "is no list contained therein, nor contains details about the", "PLA rectangular end stop spacers/holders to the extruded 2020 aluminium.", "* Read the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states only \"screws and", "1515 OpenBeam: [![Endstops and PCB mounted mechanical switches for the", "the simple barebones mechanical switches (with two holes), and uses", "not had an answer; * Obtained the [Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0)", "mounted mechanical switches (with four holes), and not the simple", "than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here is a photo [![Four pieces of", "6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here is a photo [![Four pieces of 2020", "dimensions (M2.5/3/4/5? and length) and quantity of the bolts (and", "Combine that with the fact that the Sintron kit uses", "M5 (I only discovered this after purchasing the printed parts", "(M2.5/3/4/5? and length) and quantity of the bolts (and nuts)", "in the fasteners specifically for the Sintron Kossel and not", "bolts (and nuts) which: * fasten the PCB mounted mechanical", "after purchasing the printed parts kit (see the email from", "the Kossel in general. The Sintron uses the PCB mounted", "endstops). Note that I am only interested in the fasteners", "either locally or from Chinese suppliers on eBay. --- 1", "details about the fasteners relating to the endstops, and; ", "the parts cheaply, either locally or from Chinese suppliers on", " Obtained the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which the Sintron manual", "2020 aluminium. I have: * Searched the web, but to", "M3 nuts and not M5 (I only discovered this after", "[Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which the Sintron manual is copied, but", "is unbelievably difficult to find the standard 2020 extrusion in", "and the PLA rectangular end stop spacers/holders to the extruded", "list of fasteners (bolts, nuts and washers) for the Sintron", "also has no list (as well as not being relevant", "I purchased only the 3D printed parts from Sintron, and", "then I have the problem of finding a nut to", "stop spacers/holders, and; fasten the PCB mounted mechanical switches", "(it is unbelievably difficult to find the standard 2020 extrusion", "in Bangkok). Combine that with the fact that the Sintron", "PCB mounted mechanical switches (with four holes), and not the", "and I am sourcing the rest of the parts cheaply,", "manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which the Sintron manual is copied, but that", "the fact that the Sintron kit uses only M3 nuts", "PLA rectangular end stop spacers/holders, and; * fasten the PCB", "and; * Obtained the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which the Sintron", "not through lack of research, but because there is no", "* fasten the PCB mounted mechanical switches to the PLA", "of research, but because there is no available list of", "holes), and uses 2020 aluminium1, not 1515 OpenBeam: [![Endstops and", "the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states only \"screws and nuts provided\";", "be great, but in particular, I need the dimensions (M2.5/3/4/5?", "I have the problem of finding a nut to use", "but there is no list contained therein, nor contains details", "rectangular end stop spacers/holders, and; * fasten the PCB mounted", "and not the Kossel in general.** The Sintron uses the", "my particular case, there is an additional complication. The profile", "only discovered this after purchasing the printed parts kit (see", "* Obtained the [Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there is no", "not being relevant with respect to the endstops). *Note that", "not* M5 (I only discovered this after purchasing the printed", "T-Nuts, only M5 hexagonal nuts (it is unbelievably difficult to", "the rest of the parts cheaply, either locally or from", "my answer below) - not through lack of research, but", "I have: * Searched the web, but to no avail;", "### TL;DR I need a complete list of fasteners (bolts,", "but because there is no available list of fasteners), then", "The profile of the non-standard/non-\"European\" 2020 extrusion that I am", "where this is documented? A complete list would be great,", "endstops, and; * Obtained the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which the", "nuts, with outer diameter greater than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here is", "the PCB mounted mechanical switches and the PLA rectangular end", "I am using, does not take T-Nuts, only M5 hexagonal", "length) and quantity of the bolts (and nuts) which: ", "the standard 2020 extrusion in Bangkok). Combine that with the", "parts from Sintron, and I am sourcing the rest of", "great, but in particular, I need the dimensions (M2.5/3/4/5? and", "aluminium1, not 1515 OpenBeam: [![Endstops and PCB mounted mechanical switches", "therein, nor contains details about the fasteners relating to the", "as not being relevant with respect to the endstops). Note", "complete list would be great, but in particular, I need", "page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states only \"screws and nuts provided\"; Contacted", "*Note that I am only interested in the fasteners specifically", "that the Sintron kit uses only M3 nuts and not", "parts kit (see the email from Sintron, in my answer", "an answer; * Obtained the [Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there", "manual is copied, but that also has no list (as", "case, there is an additional complication. The profile of the", "nut to use (see [Fat hexagonal M3 nuts, with outer", "the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which the Sintron manual is copied,", "research, but because there is no available list of fasteners),", "or knows where this is documented? A complete list would", "bought this kit, and knows the answer, or knows where", "aluminium. I have: * Searched the web, but to no", "knows the answer, or knows where this is documented? A", "am only interested in the fasteners specifically for the Sintron", "--- 1 In my particular case, there is an additional", "(as well as not being relevant with respect to the", "Here is a photo [![Four pieces of 2020 Aluminium extrusion](https://i.stack.imgur.com/UgSHu.jpg)](https://i.stack.imgur.com/UgSHu.jpg)", "M5 hexagonal nuts (it is unbelievably difficult to find the", "fasteners (bolts, nuts and washers) for the Sintron Kossel. ---", "switches for the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because I purchased only", "a complete list of fasteners (bolts, nuts and washers) for", "nuts) which: fasten the PCB mounted mechanical switches to", "Because I purchased only the 3D printed parts from Sintron,", "Searched the web, but to no avail; * Read the", "but in particular, I need the dimensions (M2.5/3/4/5? and length)", "unbelievably difficult to find the standard 2020 extrusion in Bangkok).", "I need the dimensions (M2.5/3/4/5? and length) and quantity of", "hexagonal M3 nuts, with outer diameter greater than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)).", "about the fasteners relating to the endstops, and; * Obtained", "- not through lack of research, but because there is", "list contained therein, nor contains details about the fasteners relating", "the fasteners relating to the endstops, and; * Obtained the", "provided\"; * Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not had an answer; ", "but that also has no list (as well as not", "mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here is a photo [![Four pieces of 2020 Aluminium", "sourcing the rest of the parts cheaply, either locally or", "this is documented? A complete list would be great, but", "(and nuts) which: fasten the PCB mounted mechanical switches", "the endstops). *Note that I am only interested in the", "specifically for the Sintron Kossel* and not the Kossel in", "fasteners specifically for the Sintron Kossel and not the Kossel", "four holes), and not the simple barebones mechanical switches (with", "the Sintron Kossel* and not the Kossel in general.** The", "extruded 2020 aluminium. I have: * Searched the web, but", "and uses 2020 aluminium1, not 1515 OpenBeam: [![Endstops and PCB", "for the Sintron Kossel. --- Has anyone bought this kit,", "[Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there is no list contained therein,", "am sourcing the rest of the parts cheaply, either locally", "the PCB mounted mechanical switches to the PLA rectangular end", "hexagonal nuts (it is unbelievably difficult to find the standard", "extrusion that I am using, does not take T-Nuts, only", "and length) and quantity of the bolts (and nuts) which:", "not take T-Nuts, only M5 hexagonal nuts (it is unbelievably", "barebones mechanical switches (with two holes), and uses 2020 aluminium1,", "uses the PCB mounted mechanical switches (with four holes), and", "and quantity of the bolts (and nuts) which: * fasten", "and PCB mounted mechanical switches for the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why?", "quantity of the bolts (and nuts) which: * fasten the", "through lack of research, but because there is no available", "relevant with respect to the endstops). *Note that I am", "copied, but that also has no list (as well as", "would be great, but in particular, I need the dimensions", "there is an additional complication. The profile of the non-standard/non-\"European\"", "had an answer; Obtained the [Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but", "cheaply, either locally or from Chinese suppliers on eBay. ---", "printed parts kit (see the email from Sintron, in my", "of fasteners (bolts, nuts and washers) for the Sintron Kossel.", "fact that the Sintron kit uses only M3 nuts and", "A complete list would be great, but in particular, I", "only M3 nuts and not M5 (I only discovered this", "lack of research, but because there is no available list", "Kossel* and not the Kossel in general.** The Sintron uses", "mounted mechanical switches to the PLA rectangular end stop spacers/holders,", "end stop spacers/holders to the extruded 2020 aluminium. I have:", "well as not being relevant with respect to the endstops).", "from Sintron, in my answer below) - not through lack", "eBay. --- 1 In my particular case, there is an", "the printed parts kit (see the email from Sintron, in", "(see [Fat hexagonal M3 nuts, with outer diameter greater than", "nuts and not M5 (I only discovered this after purchasing", "Obtained the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which the Sintron manual is", "greater than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here is a photo [![Four pieces", "no list contained therein, nor contains details about the fasteners", "OpenBeam: [![Endstops and PCB mounted mechanical switches for the Sintron", "on eBay. --- 1 In my particular case, there is", "not the simple barebones mechanical switches (with two holes), and", "stop spacers/holders to the extruded 2020 aluminium. I have: ", "using, does not* take T-Nuts, only M5 hexagonal nuts (it", "need the dimensions (M2.5/3/4/5? and length) and quantity of the", "the web, but to no avail; * Read the [product", "simple barebones mechanical switches (with two holes), and uses 2020", "of fasteners), then I have the problem of finding a", "switches (with four holes), and not the simple barebones mechanical", "the Sintron kit uses only M3 nuts and not M5", "the [Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there is no list contained", "Sintron kit uses only M3 nuts and not M5 (I", "the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because I purchased only the 3D", "has no list (as well as not being relevant with", "of the non-standard/non-\"European\" 2020 extrusion that I am using, does", "no available list of fasteners), then I have the problem", "diameter greater than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here is a photo [![Four", "switches to the PLA rectangular end stop spacers/holders, and; ", "is copied, but that also has no list (as well", "profile of the non-standard/non-\"European\" 2020 extrusion that I am using,", "Chinese suppliers on eBay. --- 1 In my particular case,", " Searched the web, but to no avail; * Read", "(I only discovered this after purchasing the printed parts kit", "[product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states only \"screws and nuts provided\"; ", "holes), and not the simple barebones mechanical switches (with two", "the non-standard/non-\"European\" 2020 extrusion that I am using, does not", "washers) for the Sintron Kossel. --- Has anyone bought this", "(with four holes), and not the simple barebones mechanical switches", "(with two holes), and uses 2020 aluminium1, not 1515 OpenBeam:", "not 1515 OpenBeam: [![Endstops and PCB mounted mechanical switches for", "parts cheaply, either locally or from Chinese suppliers on eBay.", "only \"screws and nuts provided\"; Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not", "TL;DR I need a complete list of fasteners (bolts, nuts", "particular, I need the dimensions (M2.5/3/4/5? and length) and quantity", "to the endstops, and; * Obtained the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from", "of finding a nut to use (see [Fat hexagonal M3", "fasten the PCB mounted mechanical switches to the PLA rectangular", "[Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not had an answer; * Obtained the [Sintron", "PCB mounted mechanical switches for the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because", "Kossel in general.** The Sintron uses the PCB mounted mechanical", "2020 extrusion that I am using, does not take T-Nuts,", "mechanical switches and the PLA rectangular end stop spacers/holders to", "nuts and washers) for the Sintron Kossel. --- Has anyone", "nuts provided\"; * Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not had an answer;", "need a complete list of fasteners (bolts, nuts and washers)", "manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there is no list contained therein, nor contains", "which: * fasten the PCB mounted mechanical switches to the", "find the standard 2020 extrusion in Bangkok). Combine that with", "with respect to the endstops). *Note that I am only", "only the 3D printed parts from Sintron, and I am", "[![Endstops and PCB mounted mechanical switches for the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png)", "with the fact that the Sintron kit uses only M3", "no list (as well as not being relevant with respect", "Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because I purchased only the 3D printed parts", "M3 nuts, with outer diameter greater than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here", "purchased only the 3D printed parts from Sintron, and I", "finding a nut to use (see [Fat hexagonal M3 nuts,", "take T-Nuts, only M5 hexagonal nuts (it is unbelievably difficult", "this after* purchasing the printed parts kit (see the email", "with outer diameter greater than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here is a", "is documented? A complete list would be great, but in", "email from Sintron, in my answer below) - not through", "mechanical switches (with four holes), and not the simple barebones", "fasteners relating to the endstops, and; * Obtained the [Blomker", "Bangkok). Combine that with the fact that the Sintron kit", "kit (see the email from Sintron, in my answer below)", "PCB mounted mechanical switches and the PLA rectangular end stop", "and not the simple barebones mechanical switches (with two holes),", "Sintron uses the PCB mounted mechanical switches (with four holes),", "2020 aluminium1, not 1515 OpenBeam: [![Endstops and PCB mounted mechanical", "contains details about the fasteners relating to the endstops, and;", "Why? Because I purchased only the 3D printed parts from", "and; * fasten the PCB mounted mechanical switches and the", "or from Chinese suppliers on eBay. --- 1 In my", "[Fat hexagonal M3 nuts, with outer diameter greater than 6", "I am only interested in the fasteners specifically for the", "printed parts from Sintron, and I am sourcing the rest", "documented? A complete list would be great, but in particular,", "in particular, I need the dimensions (M2.5/3/4/5? and length) and", "mechanical switches (with two holes), and uses 2020 aluminium1, not", "from Sintron, and I am sourcing the rest of the", "the bolts (and nuts) which: fasten the PCB mounted", "being relevant with respect to the endstops). *Note that I", "the Sintron manual is copied, but that also has no", "Sintron, in my answer below) - not through lack of", "because there is* no available list of fasteners), then I", "Sintron Kossel. --- Has anyone bought this kit, and knows", "mechanical switches to the PLA rectangular end stop spacers/holders, and;", "a nut to use (see [Fat hexagonal M3 nuts, with", "states only \"screws and nuts provided\"; * Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but", "kit uses only M3 nuts and not M5 (I only", "discovered this after purchasing the printed parts kit (see the", "the dimensions (M2.5/3/4/5? and length) and quantity of the bolts", "In my particular case, there is an additional complication. The", "difficult to find the standard 2020 extrusion in Bangkok). Combine", "not the Kossel in general.** The Sintron uses the PCB", "non-standard/non-\"European\" 2020 extrusion that I am using, does not take", "to the endstops). *Note that I am only interested in", "PCB mounted mechanical switches to the PLA rectangular end stop", "that also has no list (as well as not being", "only interested in the fasteners specifically for the Sintron Kossel", "additional complication. The profile of the non-standard/non-\"European\" 2020 extrusion that", "use (see [Fat hexagonal M3 nuts, with outer diameter greater", "to use (see [Fat hexagonal M3 nuts, with outer diameter", "to the extruded 2020 aluminium. I have: Searched the", "outer diameter greater than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here is a photo", "general.** The Sintron uses the PCB mounted mechanical switches (with", "Kossel. --- Has anyone bought this kit, and knows the", "Read the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states only \"screws and nuts", "Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not had an answer; Obtained the", "mounted mechanical switches for the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because I", "knows where this is documented? A complete list would be", "list (as well as not being relevant with respect to", "in my answer below) - not through lack of research,", "Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because I purchased only the 3D printed", "the email from Sintron, in my answer below) - not", "the PCB mounted mechanical switches (with four holes), and not", "for the Sintron Kossel* and not the Kossel in general.*", "list would be great, but in particular, I need the", "available list of fasteners), then I have the problem of", "list of fasteners), then I have the problem of finding", "particular case, there is an additional complication. The profile of", "from which the Sintron manual is copied, but that also", "switches and the PLA rectangular end stop spacers/holders to the", "and nuts provided\"; Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not had an", "uses only M3 nuts and not M5 (I only discovered", "rectangular end stop spacers/holders to the extruded 2020 aluminium. I", "there is no available list of fasteners), then I have", "an additional complication. The profile of the non-standard/non-\"European\" 2020 extrusion", "contained therein, nor contains details about the fasteners relating to", "kit, and knows the answer, or knows where this is", "* fasten the PCB mounted mechanical switches and the PLA", "of the bolts (and nuts) which: * fasten the PCB", "the fasteners specifically for the Sintron Kossel and not the", "which states only \"screws and nuts provided\"; * Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa),", "the PLA rectangular end stop spacers/holders, and; * fasten the", "the problem of finding a nut to use (see [Fat", "mechanical switches for the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because I purchased", "Sintron, and I am sourcing the rest of the parts", "spacers/holders, and; * fasten the PCB mounted mechanical switches and", "relating to the endstops, and; * Obtained the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf),", "and knows the answer, or knows where this is documented?", "the Sintron Kossel. --- Has anyone bought this kit, and", "3D printed parts from Sintron, and I am sourcing the", "that with the fact that the Sintron kit uses only", "fasteners), then I have the problem of finding a nut", "which the Sintron manual is copied, but that also has", "to no avail; * Read the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states", "\"screws and nuts provided\"; * Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not had", "avail; * Read the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states only \"screws", "answer; * Obtained the [Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there is", "(bolts, nuts and washers) for the Sintron Kossel. --- Has", "have: * Searched the web, but to no avail; ", "the PLA rectangular end stop spacers/holders to the extruded 2020", "the answer, or knows where this is documented? A complete", "interested in the fasteners specifically for the Sintron Kossel* and", "1 In my particular case, there is an additional complication.", "this kit, and knows the answer, or knows where this", "the endstops, and; * Obtained the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which", "of the parts cheaply, either locally or from Chinese suppliers", "have the problem of finding a nut to use (see", "web, but to no avail; * Read the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062),", "nuts (it is unbelievably difficult to find the standard 2020", "mounted mechanical switches and the PLA rectangular end stop spacers/holders", "* Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not had an answer; * Obtained", "build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there is no list contained therein, nor", "anyone bought this kit, and knows the answer, or knows", "Obtained the [Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there is no list", "in general.** The Sintron uses the PCB mounted mechanical switches", "end stop spacers/holders, and; * fasten the PCB mounted mechanical", "am using, does not take T-Nuts, only M5 hexagonal nuts", "is no available list of fasteners), then I have the", "spacers/holders to the extruded 2020 aluminium. I have: * Searched", "purchasing the printed parts kit (see the email from Sintron,", "Sintron Kossel* and not the Kossel in general. The Sintron", "complication. The profile of the non-standard/non-\"European\" 2020 extrusion that I", "respect to the endstops). Note that I am only interested", "answer, or knows where this is documented? A complete list", "fasten the PCB mounted mechanical switches and the PLA rectangular", "the extruded 2020 aluminium. I have: * Searched the web,", "(see the email from Sintron, in my answer below) -", "I need a complete list of fasteners (bolts, nuts and", "I am sourcing the rest of the parts cheaply, either", "and washers) for the Sintron Kossel. --- Has anyone bought", "switches (with two holes), and uses 2020 aluminium1, not 1515", "locally or from Chinese suppliers on eBay. --- 1 In", "suppliers on eBay. --- 1 In my particular case, there", "from Chinese suppliers on eBay. --- 1 In my particular", "uses 2020 aluminium1, not 1515 OpenBeam: [![Endstops and PCB mounted", "Has anyone bought this kit, and knows the answer, or", "does not take T-Nuts, only M5 hexagonal nuts (it is", "but to no avail; * Read the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which", "only M5 hexagonal nuts (it is unbelievably difficult to find", "extrusion in Bangkok). Combine that with the fact that the", "rest of the parts cheaply, either locally or from Chinese", "that I am only interested in the fasteners specifically for", "standard 2020 extrusion in Bangkok). Combine that with the fact", "below) - not through lack of research, but because there", "--- Has anyone bought this kit, and knows the answer,", "to the PLA rectangular end stop spacers/holders, and; fasten", "nor contains details about the fasteners relating to the endstops,", "two holes), and uses 2020 aluminium1, not 1515 OpenBeam: [![Endstops", "and not M5 (I only discovered this after purchasing the", "answer below) - not through lack of research, but because", "problem of finding a nut to use (see [Fat hexagonal", "Sintron manual is copied, but that also has no list", "is an additional complication. The profile of the non-standard/non-\"European\" 2020", "that I am using, does not take T-Nuts, only M5", "to find the standard 2020 extrusion in Bangkok). Combine that", "the 3D printed parts from Sintron, and I am sourcing" ]
[ "checked the MOSFET and there is no obvious scorching or", "of a newbie on this, I am still getting familiar", "bad solder joints on the MKS board. This leads me", "I just get confused. What I am thinking is somehow/somewhere", "joints on the MKS board. This leads me to believe", "being referenced in firmware from `boards.h` but looking at `configuration.h`", "won’t stop at the set temperature. I checked the MOSFET", "bed and SN04 sensor. All temperature sensors work and give", "is no obvious scorching or bad solder joints on the", "referenced as a fan that is just off or on.", "or bad solder joints on the MKS board. This leads", "running Marlin RC8 Tevo Community build for the dual extruder,", "am still getting familiar with G-code and Marlin. I have", "`E1` when activated runs at 100% until the overtemps kicks", "but looking at `configuration.h` I just get confused. What I", "with a MKS Base 1.5 board and dual extruders. I", "with G-code and Marlin. I have confirmed the correct board", "from `boards.h` but looking at `configuration.h` I just get confused.", "leads me to believe it is a mix-up in firmware", "in firmware from `boards.h` but looking at `configuration.h` I just", "give accurate reading but `E1` when activated runs at 100%", "a fan that is just off or on. Anybody have", "the correct board is being referenced in firmware from `boards.h`", "be referenced as a fan that is just off or", "dual extruders. I am running Marlin RC8 Tevo Community build", "and Marlin. I have confirmed the correct board is being", "the MKS board. This leads me to believe it is", "a mix-up in firmware but, being a bit of a", "on this, I am still getting familiar with G-code and", "stop at the set temperature. I checked the MOSFET and", "to believe it is a mix-up in firmware but, being", "temperature sensors work and give accurate reading but `E1` when", "a bit of a newbie on this, I am still", "Marlin. I have confirmed the correct board is being referenced", "when activated runs at 100% until the overtemps kicks in", "temperature. I checked the MOSFET and there is no obvious", "accurate reading but `E1` when activated runs at 100% until", "I have a Tevo Tarantula with a MKS Base 1.5", "and dual extruders. I am running Marlin RC8 Tevo Community", "reads proper temperatures through the thermistor it just won’t stop", "extruder, large bed and SN04 sensor. All temperature sensors work", "is somehow/somewhere `E1` might be referenced as a fan that", "am running Marlin RC8 Tevo Community build for the dual", "reading but `E1` when activated runs at 100% until the", "at 100% until the overtemps kicks in and shuts down", "scorching or bad solder joints on the MKS board. This", "firmware from `boards.h` but looking at `configuration.h` I just get", "it reads proper temperatures through the thermistor it just won’t", "have confirmed the correct board is being referenced in firmware", "I am thinking is somehow/somewhere `E1` might be referenced as", "confirmed the correct board is being referenced in firmware from", "kicks in and shuts down the system. Like I said,", "and there is no obvious scorching or bad solder joints", "might be referenced as a fan that is just off", "but, being a bit of a newbie on this, I", "have a Tevo Tarantula with a MKS Base 1.5 board", "mix-up in firmware but, being a bit of a newbie", "familiar with G-code and Marlin. I have confirmed the correct", "MOSFET and there is no obvious scorching or bad solder", "said, it reads proper temperatures through the thermistor it just", "I am running Marlin RC8 Tevo Community build for the", "sensors work and give accurate reading but `E1` when activated", "no obvious scorching or bad solder joints on the MKS", "on the MKS board. This leads me to believe it", "newbie on this, I am still getting familiar with G-code", "this, I am still getting familiar with G-code and Marlin.", "board. This leads me to believe it is a mix-up", "temperatures through the thermistor it just won’t stop at the", "and give accurate reading but `E1` when activated runs at", "proper temperatures through the thermistor it just won’t stop at", "bit of a newbie on this, I am still getting", "get confused. What I am thinking is somehow/somewhere `E1` might", "This leads me to believe it is a mix-up in", "somehow/somewhere `E1` might be referenced as a fan that is", "extruders. I am running Marlin RC8 Tevo Community build for", "All temperature sensors work and give accurate reading but `E1`", "the MOSFET and there is no obvious scorching or bad", "thermistor it just won’t stop at the set temperature. I", "MKS board. This leads me to believe it is a", "through the thermistor it just won’t stop at the set", "believe it is a mix-up in firmware but, being a", "referenced in firmware from `boards.h` but looking at `configuration.h` I", "thinking is somehow/somewhere `E1` might be referenced as a fan", "down the system. Like I said, it reads proper temperatures", "I have confirmed the correct board is being referenced in", "runs at 100% until the overtemps kicks in and shuts", "large bed and SN04 sensor. All temperature sensors work and", "until the overtemps kicks in and shuts down the system.", "getting familiar with G-code and Marlin. I have confirmed the", "the thermistor it just won’t stop at the set temperature.", "and shuts down the system. Like I said, it reads", "obvious scorching or bad solder joints on the MKS board.", "am thinking is somehow/somewhere `E1` might be referenced as a", "`boards.h` but looking at `configuration.h` I just get confused. What", "being a bit of a newbie on this, I am", "solder joints on the MKS board. This leads me to", "a Tevo Tarantula with a MKS Base 1.5 board and", "`configuration.h` I just get confused. What I am thinking is", "is a mix-up in firmware but, being a bit of", "for the dual extruder, large bed and SN04 sensor. All", "SN04 sensor. All temperature sensors work and give accurate reading", "at `configuration.h` I just get confused. What I am thinking", "looking at `configuration.h` I just get confused. What I am", "but `E1` when activated runs at 100% until the overtemps", "RC8 Tevo Community build for the dual extruder, large bed", "just won’t stop at the set temperature. I checked the", "in firmware but, being a bit of a newbie on", "build for the dual extruder, large bed and SN04 sensor.", "there is no obvious scorching or bad solder joints on", "a newbie on this, I am still getting familiar with", "sensor. All temperature sensors work and give accurate reading but", "firmware but, being a bit of a newbie on this,", "`E1` might be referenced as a fan that is just", "set temperature. I checked the MOSFET and there is no", "work and give accurate reading but `E1` when activated runs", "board and dual extruders. I am running Marlin RC8 Tevo", "I checked the MOSFET and there is no obvious scorching", "Base 1.5 board and dual extruders. I am running Marlin", "me to believe it is a mix-up in firmware but,", "the overtemps kicks in and shuts down the system. Like", "Tevo Community build for the dual extruder, large bed and", "shuts down the system. Like I said, it reads proper", "the set temperature. I checked the MOSFET and there is", "Like I said, it reads proper temperatures through the thermistor", "system. Like I said, it reads proper temperatures through the", "as a fan that is just off or on. Anybody", "fan that is just off or on. Anybody have ideas?", "What I am thinking is somehow/somewhere `E1` might be referenced", "MKS Base 1.5 board and dual extruders. I am running", "it is a mix-up in firmware but, being a bit", "1.5 board and dual extruders. I am running Marlin RC8", "it just won’t stop at the set temperature. I checked", "G-code and Marlin. I have confirmed the correct board is", "I am still getting familiar with G-code and Marlin. I", "100% until the overtemps kicks in and shuts down the", "I said, it reads proper temperatures through the thermistor it", "the system. Like I said, it reads proper temperatures through", "a MKS Base 1.5 board and dual extruders. I am", "in and shuts down the system. Like I said, it", "confused. What I am thinking is somehow/somewhere `E1` might be", "just get confused. What I am thinking is somehow/somewhere `E1`", "Tarantula with a MKS Base 1.5 board and dual extruders.", "Marlin RC8 Tevo Community build for the dual extruder, large", "activated runs at 100% until the overtemps kicks in and", "dual extruder, large bed and SN04 sensor. All temperature sensors", "overtemps kicks in and shuts down the system. Like I", "board is being referenced in firmware from `boards.h` but looking", "and SN04 sensor. All temperature sensors work and give accurate", "still getting familiar with G-code and Marlin. I have confirmed", "the dual extruder, large bed and SN04 sensor. All temperature", "is being referenced in firmware from `boards.h` but looking at", "correct board is being referenced in firmware from `boards.h` but", "Tevo Tarantula with a MKS Base 1.5 board and dual", "Community build for the dual extruder, large bed and SN04", "at the set temperature. I checked the MOSFET and there" ]
[ "have a stock Monoprice Maker Select v2 with the PEI", "Maker Select v2 with the PEI surface it shipped with.", "on, my print sticks perfectly. When rafts are off, my", "stick too. I am using Simplify3D & have tried a", "am using Simplify3D & have tried a few basic tweaks,", "know rafts stick fine with what I have. I figure", "my bed, but had great reliability when use rafts. This", "of PETG and it is very hard to remove rafts,", "simple square for testing) with the same settings, except I", "basic tweaks, but I am largely stabbing in the dark.", "v2 with the PEI surface it shipped with. I haven't", "when I was using PLA, but I recently got a", "I am largely stabbing in the dark. What are the", "a first layer of my print, that might make it", "for testing) with the same settings, except I am turning", "with the same settings, except I am turning rafts on/off.", "skirt (which sticks fine on the raft print). With rafts", "some settings I can change to make my first layer", "figure out whats wrong. I am printing the same file", "tried a few basic tweaks, but I am largely stabbing", "a nice line for the skirt / first layer. With", "rafts are off, my print doesn't stick at all -", "there must be some settings I can change to make", "my printer lay down a nice line for the skirt", "but I am largely stabbing in the dark. What are", "additions/changes to get better adhesion, since I know rafts stick", "comparison to a first layer of my print, that might", "great reliability when use rafts. This didn't present a problem", "am printing the same file (currently a simple square for", "to make my first layer stick too. I am using", "I haven't tried any bed additions/changes to get better adhesion,", "sticks perfectly. When rafts are off, my print doesn't stick", "to get better adhesion, since I know rafts stick fine", "I was using PLA, but I recently got a roll", "I figure there must be some settings I can change", "haven't tried any bed additions/changes to get better adhesion, since", "a stock Monoprice Maker Select v2 with the PEI surface", "stabbing in the dark. What are the specific characteristics of", "once again trying to figure out whats wrong. I am", "on my bed, but had great reliability when use rafts.", "skirt / first layer. With rafts off, I watched plastic", "on/off. When rafts are on, my print sticks perfectly. When", "the raft print). With rafts on, I can watch my", "getting prints to stick directly on my bed, but had", "/ first layer. With rafts off, I watched plastic ooze", "doesn't stick at all - not even the skirt (which", "whats wrong. I am printing the same file (currently a", "printing the same file (currently a simple square for testing)", "specific characteristics of a first layer raft, in comparison to", "am turning rafts on/off. When rafts are on, my print", "using Simplify3D & have tried a few basic tweaks, but", "recently got a roll of PETG and it is very", "I've always had trouble getting prints to stick directly on", "sticks fine on the raft print). With rafts on, I", "With rafts on, I can watch my printer lay down", "watch my printer lay down a nice line for the", "to stick directly on my bed, but had great reliability", "sticking to the plate at all. I have a stock", "a first layer raft, in comparison to a first layer", "the nozzle and ride along with the print head, not", "rafts, so I am once again trying to figure out", "characteristics of a first layer raft, in comparison to a", "it is very hard to remove rafts, so I am", "down a nice line for the skirt / first layer.", "(which sticks fine on the raft print). With rafts on,", "printer lay down a nice line for the skirt /", "surface it shipped with. I haven't tried any bed additions/changes", "& have tried a few basic tweaks, but I am", "must be some settings I can change to make my", "I recently got a roll of PETG and it is", "print head, not sticking to the plate at all. I", "remove rafts, so I am once again trying to figure", "too. I am using Simplify3D & have tried a few", "What are the specific characteristics of a first layer raft,", "first layer raft, in comparison to a first layer of", "stock Monoprice Maker Select v2 with the PEI surface it", "with the print head, not sticking to the plate at", "so I am once again trying to figure out whats", "can change to make my first layer stick too. I", "I am printing the same file (currently a simple square", "along with the print head, not sticking to the plate", "few basic tweaks, but I am largely stabbing in the", "are off, my print doesn't stick at all - not", "- not even the skirt (which sticks fine on the", "Monoprice Maker Select v2 with the PEI surface it shipped", "in comparison to a first layer of my print, that", "directly on my bed, but had great reliability when use", "make my first layer stick too. I am using Simplify3D", "(currently a simple square for testing) with the same settings,", "my print sticks perfectly. When rafts are off, my print", "I watched plastic ooze out of the nozzle and ride", "using PLA, but I recently got a roll of PETG", "my first layer stick too. I am using Simplify3D &", "even the skirt (which sticks fine on the raft print).", "I can change to make my first layer stick too.", "for the skirt / first layer. With rafts off, I", "the skirt (which sticks fine on the raft print). With", "very hard to remove rafts, so I am once again", "better adhesion, since I know rafts stick fine with what", "prints to stick directly on my bed, but had great", "bed additions/changes to get better adhesion, since I know rafts", "I know rafts stick fine with what I have. I", "roll of PETG and it is very hard to remove", "the specific characteristics of a first layer raft, in comparison", "get better adhesion, since I know rafts stick fine with", "all. I have a stock Monoprice Maker Select v2 with", "first layer stick too. I am using Simplify3D & have", "stick directly on my bed, but had great reliability when", "with the PEI surface it shipped with. I haven't tried", "use rafts. This didn't present a problem when I was", "to figure out whats wrong. I am printing the same", "can watch my printer lay down a nice line for", "but had great reliability when use rafts. This didn't present", "out whats wrong. I am printing the same file (currently", "to a first layer of my print, that might make", "what I have. I figure there must be some settings", "my print doesn't stick at all - not even the", "with. I haven't tried any bed additions/changes to get better", "the same file (currently a simple square for testing) with", "to remove rafts, so I am once again trying to", "watched plastic ooze out of the nozzle and ride along", "any bed additions/changes to get better adhesion, since I know", "since I know rafts stick fine with what I have.", "This didn't present a problem when I was using PLA,", "plastic ooze out of the nozzle and ride along with", "nice line for the skirt / first layer. With rafts", "rafts. This didn't present a problem when I was using", "present a problem when I was using PLA, but I", "got a roll of PETG and it is very hard", "layer stick too. I am using Simplify3D & have tried", "file (currently a simple square for testing) with the same", "are the specific characteristics of a first layer raft, in", "not even the skirt (which sticks fine on the raft", "have tried a few basic tweaks, but I am largely", "is very hard to remove rafts, so I am once", "print sticks perfectly. When rafts are off, my print doesn't", "all - not even the skirt (which sticks fine on", "trying to figure out whats wrong. I am printing the", "When rafts are off, my print doesn't stick at all", "reliability when use rafts. This didn't present a problem when", "off, my print doesn't stick at all - not even", "PEI surface it shipped with. I haven't tried any bed", "again trying to figure out whats wrong. I am printing", "the same settings, except I am turning rafts on/off. When", "the plate at all. I have a stock Monoprice Maker", "layer of my print, that might make it stick better?", "on the raft print). With rafts on, I can watch", "of the nozzle and ride along with the print head,", "settings I can change to make my first layer stick", "when use rafts. This didn't present a problem when I", "dark. What are the specific characteristics of a first layer", "largely stabbing in the dark. What are the specific characteristics", "turning rafts on/off. When rafts are on, my print sticks", "am once again trying to figure out whats wrong. I", "lay down a nice line for the skirt / first", "print). With rafts on, I can watch my printer lay", "PLA, but I recently got a roll of PETG and", "head, not sticking to the plate at all. I have", "shipped with. I haven't tried any bed additions/changes to get", "raft, in comparison to a first layer of my print,", "fine with what I have. I figure there must be", "the dark. What are the specific characteristics of a first", "on, I can watch my printer lay down a nice", "I have. I figure there must be some settings I", "the PEI surface it shipped with. I haven't tried any", "Simplify3D & have tried a few basic tweaks, but I", "bed, but had great reliability when use rafts. This didn't", "I can watch my printer lay down a nice line", "be some settings I can change to make my first", "first layer. With rafts off, I watched plastic ooze out", "raft print). With rafts on, I can watch my printer", "fine on the raft print). With rafts on, I can", "was using PLA, but I recently got a roll of", "and ride along with the print head, not sticking to", "the print head, not sticking to the plate at all.", "tweaks, but I am largely stabbing in the dark. What", "stick at all - not even the skirt (which sticks", "stick fine with what I have. I figure there must", "didn't present a problem when I was using PLA, but", "always had trouble getting prints to stick directly on my", "hard to remove rafts, so I am once again trying", "With rafts off, I watched plastic ooze out of the", "layer raft, in comparison to a first layer of my", "not sticking to the plate at all. I have a", "to the plate at all. I have a stock Monoprice", "had great reliability when use rafts. This didn't present a", "problem when I was using PLA, but I recently got", "a roll of PETG and it is very hard to", "layer. With rafts off, I watched plastic ooze out of", "at all. I have a stock Monoprice Maker Select v2", "change to make my first layer stick too. I am", "with what I have. I figure there must be some", "I am turning rafts on/off. When rafts are on, my", "of a first layer raft, in comparison to a first", "square for testing) with the same settings, except I am", "Select v2 with the PEI surface it shipped with. I", "first layer of my print, that might make it stick", "I have a stock Monoprice Maker Select v2 with the", "ooze out of the nozzle and ride along with the", "the skirt / first layer. With rafts off, I watched", "rafts on, I can watch my printer lay down a", "out of the nozzle and ride along with the print", "a simple square for testing) with the same settings, except", "rafts are on, my print sticks perfectly. When rafts are", "off, I watched plastic ooze out of the nozzle and", "same file (currently a simple square for testing) with the", "testing) with the same settings, except I am turning rafts", "print doesn't stick at all - not even the skirt", "PETG and it is very hard to remove rafts, so", "same settings, except I am turning rafts on/off. When rafts", "am largely stabbing in the dark. What are the specific", "rafts on/off. When rafts are on, my print sticks perfectly.", "a few basic tweaks, but I am largely stabbing in", "at all - not even the skirt (which sticks fine", "plate at all. I have a stock Monoprice Maker Select", "tried any bed additions/changes to get better adhesion, since I", "ride along with the print head, not sticking to the", "rafts stick fine with what I have. I figure there", "but I recently got a roll of PETG and it", "had trouble getting prints to stick directly on my bed,", "have. I figure there must be some settings I can", "figure there must be some settings I can change to", "perfectly. When rafts are off, my print doesn't stick at", "and it is very hard to remove rafts, so I", "I am once again trying to figure out whats wrong.", "I am using Simplify3D & have tried a few basic", "in the dark. What are the specific characteristics of a", "except I am turning rafts on/off. When rafts are on,", "trouble getting prints to stick directly on my bed, but", "wrong. I am printing the same file (currently a simple", "are on, my print sticks perfectly. When rafts are off,", "a problem when I was using PLA, but I recently", "line for the skirt / first layer. With rafts off,", "rafts off, I watched plastic ooze out of the nozzle", "nozzle and ride along with the print head, not sticking", "When rafts are on, my print sticks perfectly. When rafts", "it shipped with. I haven't tried any bed additions/changes to", "adhesion, since I know rafts stick fine with what I", "settings, except I am turning rafts on/off. When rafts are" ]
[ "filled and not the perimeters in the image. With 0", "can use Cura as well. This is just a test", "between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want the gap to be filled; but,", "perimeter and 0% infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can notice a", "don't want to print both the perimeters and the infill", "Slic3r, but I can use Cura as well. This is", "This is just a test slice. The wing model is", "lighter it is the more efficient it will be. Any", "I can slice this? The images are screenshots in Slic3r,", "infill I got this zig-zagged line: [![Zigzag filled gap between", "it to be zig-zagged like in the image. I want", "to be filled; but, I don't want it to be", "print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can notice that its walls have a", "gap is what I want filled and not the perimeters", "smooth like the perimeters in the other image. Basically I", "1 perimeter and 0% infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can notice", "this wing design that I want to print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You", "be smooth like the perimeters in the other image. Basically", "like the perimeters. The reason why I don't want to", "this is a wing of a model plane that must", "in the other image. Basically I want a smooth infill", "to be zig-zagged like in the image. I want it", "The images are screenshots in Slic3r, but I can use", "is just a test slice. The wing model is not", "efficient it will be. Any ideas how I can slice", "which is 1.0 mm. I want to print it so", "be. Any ideas how I can slice this? The images", "design that I want to print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can notice", "0 perimeters and 100% infill I got this zig-zagged line:", "the more efficient it will be. Any ideas how I", "is the wing sliced with 1 perimeter and 0% infill:", "of a model plane that must fly, so the lighter", "be filled; but, I don't want it to be zig-zagged", "want to print it so that the perimeters are inside", "the perimeters in the other image. Basically I want a", "the other image. Basically I want a smooth infill that", "thickness. Here is the wing sliced with 1 perimeter and", "is because I want to save as much weight a", "0% infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can notice a gap between", "wing sliced with 1 perimeter and 0% infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png)", "this zig-zagged line: [![Zigzag filled gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want", "possible as this is a wing of a model plane", "the curves just like the perimeters. The reason why I", "just like the perimeters. The reason why I don't want", "have a thickness, which is 1.0 mm. I want to", "like in the image. I want it to be smooth", "just a test slice. The wing model is not finished", "want the gap to be filled; but, I don't want", "With 0 perimeters and 100% infill I got this zig-zagged", "it is the more efficient it will be. Any ideas", "that its walls have a thickness, which is 1.0 mm.", "it to be smooth like the perimeters in the other", "in Slic3r, but I can use Cura as well. This", "thickness, which is 1.0 mm. I want to print it", "to save as much weight a possible as this is", "to print both the perimeters and the infill is because", "the perimeters in the image. With 0 perimeters and 100%", "I can use Cura as well. This is just a", "smooth infill that goes around the curves just like the", "1.0 mm. I want to print it so that the", "and the infill is because I want to save as", "image. Basically I want a smooth infill that goes around", "gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want the gap to be filled;", "to be smooth like the perimeters in the other image.", "a wing of a model plane that must fly, so", "walls have a thickness, which is 1.0 mm. I want", "a possible as this is a wing of a model", "[![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can notice a gap between the perimeters.", "a thickness, which is 1.0 mm. I want to print", "perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want the gap to be filled; but, I", "the gap to be filled; but, I don't want it", "are inside that thickness. Here is the wing sliced with", "a test slice. The wing model is not finished yet.", "both the perimeters and the infill is because I want", "how I can slice this? The images are screenshots in", "model plane that must fly, so the lighter it is", "and 100% infill I got this zig-zagged line: [![Zigzag filled", "wing design that I want to print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can", "that the perimeters are inside that thickness. Here is the", "reason why I don't want to print both the perimeters", "infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can notice a gap between the", "I don't want it to be zig-zagged like in the", "the perimeters are inside that thickness. Here is the wing", "to print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can notice that its walls have", "image. With 0 perimeters and 100% infill I got this", "gap to be filled; but, I don't want it to", "images are screenshots in Slic3r, but I can use Cura", "notice a gap between the perimeters. That gap is what", "to print it so that the perimeters are inside that", "as much weight a possible as this is a wing", "goes around the curves just like the perimeters. The reason", "much weight a possible as this is a wing of", "I want to print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can notice that its", "wing of a model plane that must fly, so the", "zig-zagged like in the image. I want it to be", "so the lighter it is the more efficient it will", "use Cura as well. This is just a test slice.", "can notice that its walls have a thickness, which is", "don't want it to be zig-zagged like in the image.", "want to print both the perimeters and the infill is", "because I want to save as much weight a possible", "have this wing design that I want to print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png)", "the image. I want it to be smooth like the", "perimeters. The reason why I don't want to print both", "but, I don't want it to be zig-zagged like in", "got this zig-zagged line: [![Zigzag filled gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I", "detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can notice a gap between the perimeters. That", "Basically I want a smooth infill that goes around the", "I have this wing design that I want to print:", "perimeters are inside that thickness. Here is the wing sliced", "the wing sliced with 1 perimeter and 0% infill: [![wing", "perimeters and 100% infill I got this zig-zagged line: [![Zigzag", "The reason why I don't want to print both the", "around the curves just like the perimeters. The reason why", "I got this zig-zagged line: [![Zigzag filled gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png)", "I want to print it so that the perimeters are", "other image. Basically I want a smooth infill that goes", "You can notice that its walls have a thickness, which", "in the image. I want it to be smooth like", "want a smooth infill that goes around the curves just", "and not the perimeters in the image. With 0 perimeters", "want it to be smooth like the perimeters in the", "want to save as much weight a possible as this", "well. This is just a test slice. The wing model", "must fly, so the lighter it is the more efficient", "is 1.0 mm. I want to print it so that", "That gap is what I want filled and not the", "Any ideas how I can slice this? The images are", "ideas how I can slice this? The images are screenshots", "Cura as well. This is just a test slice. The", "that goes around the curves just like the perimeters. The", "I want a smooth infill that goes around the curves", "the perimeters and the infill is because I want to", "a model plane that must fly, so the lighter it", "sliced with 1 perimeter and 0% infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You", "mm. I want to print it so that the perimeters", "be zig-zagged like in the image. I want it to", "I want to save as much weight a possible as", "why I don't want to print both the perimeters and", "with 1 perimeter and 0% infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can", "save as much weight a possible as this is a", "the perimeters. The reason why I don't want to print", "like the perimeters in the other image. Basically I want", "perimeters in the image. With 0 perimeters and 100% infill", "as well. This is just a test slice. The wing", "image. I want it to be smooth like the perimeters", "100% infill I got this zig-zagged line: [![Zigzag filled gap", "notice that its walls have a thickness, which is 1.0", "zig-zagged line: [![Zigzag filled gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want the", "I want it to be smooth like the perimeters in", "want to print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can notice that its walls", "weight a possible as this is a wing of a", "filled gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want the gap to be", "a gap between the perimeters. That gap is what I", "perimeters and the infill is because I want to save", "perimeters. That gap is what I want filled and not", "it will be. Any ideas how I can slice this?", "plane that must fly, so the lighter it is the", "filled; but, I don't want it to be zig-zagged like", "that thickness. Here is the wing sliced with 1 perimeter", "is what I want filled and not the perimeters in", "[![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can notice that its walls have a thickness,", "will be. Any ideas how I can slice this? The", "gap between the perimeters. That gap is what I want", "that I want to print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can notice that", "it so that the perimeters are inside that thickness. Here", "inside that thickness. Here is the wing sliced with 1", "want filled and not the perimeters in the image. With", "but I can use Cura as well. This is just", "curves just like the perimeters. The reason why I don't", "Here is the wing sliced with 1 perimeter and 0%", "are screenshots in Slic3r, but I can use Cura as", "I want the gap to be filled; but, I don't", "want it to be zig-zagged like in the image. I", "more efficient it will be. Any ideas how I can", "infill that goes around the curves just like the perimeters.", "perimeters in the other image. Basically I want a smooth", "can slice this? The images are screenshots in Slic3r, but", "the infill is because I want to save as much", "slice this? The images are screenshots in Slic3r, but I", "this? The images are screenshots in Slic3r, but I can", "between the perimeters. That gap is what I want filled", "in the image. With 0 perimeters and 100% infill I", "what I want filled and not the perimeters in the", "so that the perimeters are inside that thickness. Here is", "the image. With 0 perimeters and 100% infill I got", "I don't want to print both the perimeters and the", "print both the perimeters and the infill is because I", "print it so that the perimeters are inside that thickness.", "a smooth infill that goes around the curves just like", "line: [![Zigzag filled gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want the gap", "is the more efficient it will be. Any ideas how", "not the perimeters in the image. With 0 perimeters and", "fly, so the lighter it is the more efficient it", "You can notice a gap between the perimeters. That gap", "its walls have a thickness, which is 1.0 mm. I", "and 0% infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can notice a gap", "I want filled and not the perimeters in the image.", "can notice a gap between the perimeters. That gap is", "infill is because I want to save as much weight", "screenshots in Slic3r, but I can use Cura as well.", "the lighter it is the more efficient it will be.", "the perimeters. That gap is what I want filled and", "as this is a wing of a model plane that", "that must fly, so the lighter it is the more", "[![Zigzag filled gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want the gap to", "is a wing of a model plane that must fly," ]
[ "though I make sure both the left and right hand", "at the same height before switching on the printer. Does", "I checked all guide and threaded rods were straight before", "guessing something is causing the right hand Z to skip", "checked all guide and threaded rods were straight before assembly.", "a print, the right hand Z mount ends up 1-2", "1-2 mm lower than the left, even though I make", "cause of this might be? I'm guessing something is causing", "is causing the right hand Z to skip steps. I", "both the left and right hand Z mounts of the", "the same height before switching on the printer. Does anyone", "I've noticed that after my Anet A8 completes a print,", "the cause of this might be? I'm guessing something is", "I make sure both the left and right hand Z", "the right hand Z to skip steps. I can't see", "the left and right hand Z mounts of the X-axis", "X-axis are at the same height before switching on the", "be? I'm guessing something is causing the right hand Z", "to skip steps. I can't see or hear any obvious", "Does anyone know what the cause of this might be?", "guide and threaded rods were straight before assembly. Could it", "hand Z mount ends up 1-2 mm lower than the", "can't see or hear any obvious mechanical issues. I checked", "all guide and threaded rods were straight before assembly. Could", "Z to skip steps. I can't see or hear any", "know what the cause of this might be? I'm guessing", "were straight before assembly. Could it be a faulty stepper", "noticed that after my Anet A8 completes a print, the", "any obvious mechanical issues. I checked all guide and threaded", "height before switching on the printer. Does anyone know what", "Z mount ends up 1-2 mm lower than the left,", "on the printer. Does anyone know what the cause of", "see or hear any obvious mechanical issues. I checked all", "hear any obvious mechanical issues. I checked all guide and", "skip steps. I can't see or hear any obvious mechanical", "print, the right hand Z mount ends up 1-2 mm", "before assembly. Could it be a faulty stepper or control", "mounts of the X-axis are at the same height before", "printer. Does anyone know what the cause of this might", "threaded rods were straight before assembly. Could it be a", "right hand Z mounts of the X-axis are at the", "ends up 1-2 mm lower than the left, even though", "hand Z to skip steps. I can't see or hear", "even though I make sure both the left and right", "same height before switching on the printer. Does anyone know", "sure both the left and right hand Z mounts of", "mount ends up 1-2 mm lower than the left, even", "left and right hand Z mounts of the X-axis are", "mechanical issues. I checked all guide and threaded rods were", "anyone know what the cause of this might be? I'm", "the left, even though I make sure both the left", "might be? I'm guessing something is causing the right hand", "that after my Anet A8 completes a print, the right", "right hand Z mount ends up 1-2 mm lower than", "I'm guessing something is causing the right hand Z to", "Anet A8 completes a print, the right hand Z mount", "obvious mechanical issues. I checked all guide and threaded rods", "this might be? I'm guessing something is causing the right", "hand Z mounts of the X-axis are at the same", "after my Anet A8 completes a print, the right hand", "right hand Z to skip steps. I can't see or", "steps. I can't see or hear any obvious mechanical issues.", "the right hand Z mount ends up 1-2 mm lower", "A8 completes a print, the right hand Z mount ends", "left, even though I make sure both the left and", "before switching on the printer. Does anyone know what the", "than the left, even though I make sure both the", "mm lower than the left, even though I make sure", "rods were straight before assembly. Could it be a faulty", "I can't see or hear any obvious mechanical issues. I", "lower than the left, even though I make sure both", "the printer. Does anyone know what the cause of this", "or hear any obvious mechanical issues. I checked all guide", "and threaded rods were straight before assembly. Could it be", "and right hand Z mounts of the X-axis are at", "straight before assembly. Could it be a faulty stepper or", "my Anet A8 completes a print, the right hand Z", "issues. I checked all guide and threaded rods were straight", "the X-axis are at the same height before switching on", "what the cause of this might be? I'm guessing something", "assembly. Could it be a faulty stepper or control electronics?", "of this might be? I'm guessing something is causing the", "Z mounts of the X-axis are at the same height", "switching on the printer. Does anyone know what the cause", "completes a print, the right hand Z mount ends up", "up 1-2 mm lower than the left, even though I", "of the X-axis are at the same height before switching", "something is causing the right hand Z to skip steps.", "make sure both the left and right hand Z mounts", "are at the same height before switching on the printer.", "causing the right hand Z to skip steps. I can't" ]
[ "an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming that the parts that I", "on the inside of the throat, nozzle, etc., then the", "This question is not really after opinionated answers, in order", "I wondered if I sourced the individual parts from China,", "rigorous QA and testing of the build, and they have", "cheap printer, until they finally shelled out the cash and", "correctly, and end up with burring on the inside of", "the parts used in a E3D hotend probably come from", "the cash and upgraded to a genuine E3D hotend. After", "Also, the expression, you get what you pay for, springs", "cloud cuckoo land? After all, let's not forget that most,", "times, in blogs, threads, etc., so I presume that it", "stay within SE rules - although opinions are always welcome", "Heater * Thermistor could I too, end up with a", "from China, for a dollar apiece, that is to say", "to stay within SE rules - although opinions are always", "not forget that most, if not, all of the parts", "genuine E3D hotend. After that the prints were much improved.", "hotend is rather expensive, at $/£70, especially to those building", "should not be a problem, right? Has anyone actually done", "not be a problem, right? Has anyone actually done this?", "the throat, nozzle, etc., then the filament will not extrude", "anyone actually done this? Is tinkering with hotends a done", "pay for their research costs and initial machining set ups", "this is reflected in the high cost. Also, the expression,", "ups and this is reflected in the high cost. Also,", "possible. I realise that if the parts are not finished", "are machined, and finished, correctly then there should not be", "extrusion problems, shoddy prints, etc, from their cheap printer, until", "expensive, at $/£70, especially to those building to a tight", "a hotend, that performs as well as, or even out", "from China, and still achieve a high quality print? ---", "receive are machined, and finished, correctly then there should not", "Asia. I have read so many times that people were", "welcome - but I just want to know if anyone", "manufacturing bases and machining shops, in SE Asia. I have", "- but I just want to know if anyone has", "problems, shoddy prints, etc, from their cheap printer, until they", "possible to build a hotend, using separate parts, sourced on", "the build, and they have to pay for their research", "you get what you pay for, springs to mind. However,", "moved from the US/EU to the cheaper manufacturing bases and", "want to know if anyone has first hand (positive or", "Thermistor could I too, end up with a hotend, that", "it is not possible. I realise that if the parts", "there should not be a problem, right? Has anyone actually", "the high cost. Also, the expression, you get what you", "the: Throat (with Teflon lining) * Heating block ", "improved. I have read this countless* times, in blogs, threads,", "have to pay for their research costs and initial machining", "well as, or even out performs, an E3D hotend, or", "the cheaper manufacturing bases and machining shops, in SE Asia.", "the inside of the throat, nozzle, etc., then the filament", "a done thing? Does anyone have any good pointers and/or", "not finished correctly, and end up with burring on the", "NOTE: This question is not really after opinionated answers, in", "the prints were much improved. I have read this countless", "V6 hotend is rather expensive, at $/£70, especially to those", "parts from China, for a dollar apiece, that is to", "the parts are not finished correctly, and end up with", "with a hotend, that performs as well as, or even", "could I too, end up with a hotend, that performs", "I receive are machined, and finished, correctly then there should", "apiece, that is to say the: * Throat (with Teflon", "what you pay for, springs to mind. However, I wondered", "a dollar apiece, that is to say the: Throat", "* Pneumatic connector (PC4-05/PC4-M06) * Heater * Thermistor could I", "am I living in cloud cuckoo land? After all, let's", "if not, all of the parts used in a E3D", "shoddy prints, etc, from their cheap printer, until they finally", "and end up with burring on the inside of the", "performs, an E3D hotend, or am I living in cloud", "Heatsink * Nozzle * Pneumatic connector (PC4-05/PC4-M06) * Heater ", "I realise that if the parts are not finished correctly,", "SE Asia. I have read so many times* that people", "with burring on the inside of the throat, nozzle, etc.,", "good pointers and/or tips? NOTE: This question is not really", "or even out performs, an E3D hotend, or am I", "from the US/EU to the cheaper manufacturing bases and machining", "is to say the: * Throat (with Teflon lining) ", "that if the parts are not finished correctly, and end", "facilites have moved from the US/EU to the cheaper manufacturing", "that is to say the: Throat (with Teflon lining)", "throat, nozzle, etc., then the filament will not extrude correctly.", "realise that if the parts are not finished correctly, and", "most production facilites have moved from the US/EU to the", "I too, end up with a hotend, that performs as", "finished, correctly then there should not be a problem, right?", "anyone have any good pointers and/or tips? NOTE: This question", "pay for, springs to mind. However, I wondered if I", "Throat (with Teflon lining) Heating block * Heatsink ", "this countless* times, in blogs, threads, etc., so I presume", "the filament will not extrude correctly. See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to", "hotend, that performs as well as, or even out performs,", "hotend, or am I living in cloud cuckoo land? After", "obviously/presumably, there is some quite rigorous QA and testing of", "burring on the inside of the throat, nozzle, etc., then", "are not finished correctly, and end up with burring on", "costs and initial machining set ups and this is reflected", "China, for a dollar apiece, that is to say the:", "etc., so I presume that it is not possible. I", "extrude correctly. See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How long is an", "cuckoo land? After all, let's not forget that most, if", "I presume that it is not possible. I realise that", "I just want to know if anyone has first hand", "and finished, correctly then there should not be a problem,", "and testing of the build, and they have to pay", "to a tight budget. Now, obviously/presumably, there is some quite", "are always welcome - but I just want to know", "my opinion, the E3D V6 hotend is rather expensive, at", "quite rigorous QA and testing of the build, and they", "QA and testing of the build, and they have to", "will not extrude correctly. See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How long", "(PC4-05/PC4-M06) * Heater * Thermistor could I too, end up", "in a E3D hotend probably come from China anyway, these", "but I just want to know if anyone has first", "up with burring on the inside of the throat, nozzle,", "research costs and initial machining set ups and this is", "you pay for, springs to mind. However, I wondered if", "in the high cost. Also, the expression, you get what", "at $/£70, especially to those building to a tight budget.", "some quite rigorous QA and testing of the build, and", "a high quality print? --- In my opinion, the E3D", "cost. Also, the expression, you get what you pay for,", "order to stay within SE rules - although opinions are", "have read this countless times, in blogs, threads, etc., so", "to know if anyone has first hand (positive or negative)", "tinkering with hotends a done thing? Does anyone have any", "and still achieve a high quality print? --- In my", "the parts that I receive are machined, and finished, correctly", "E3D hotend. After that the prints were much improved. I", "parts, sourced on eBay, from China, and still achieve a", "I have read this countless times, in blogs, threads, etc.,", "set ups and this is reflected in the high cost.", "used in a E3D hotend probably come from China anyway,", "* Nozzle * Pneumatic connector (PC4-05/PC4-M06) * Heater * Thermistor", "problem, right? Has anyone actually done this? Is tinkering with", "let's not forget that most, if not, all of the", "forget that most, if not, all of the parts used", "a problem, right? Has anyone actually done this? Is tinkering", "In my opinion, the E3D V6 hotend is rather expensive,", "countless times, in blogs, threads, etc., so I presume that", "shops, in SE Asia. I have read so many times", "of the build, and they have to pay for their", "within SE rules - although opinions are always welcome -", "I living in cloud cuckoo land? After all, let's not", "in SE Asia. I have read so many times that", "- although opinions are always welcome - but I just", "etc., then the filament will not extrude correctly. See [tbm0115's", "living in cloud cuckoo land? After all, let's not forget", "tips? NOTE: This question is not really after opinionated answers,", "sourced on eBay, from China, and still achieve a high", "is rather expensive, at $/£70, especially to those building to", "### TL;DR Is it possible to build a hotend, using", "for a dollar apiece, that is to say the: ", "Teflon lining) Heating block * Heatsink * Nozzle ", "that most, if not, all of the parts used in", "cheaper manufacturing bases and machining shops, in SE Asia. I", "to the cheaper manufacturing bases and machining shops, in SE", "out performs, an E3D hotend, or am I living in", "actually done this? Is tinkering with hotends a done thing?", "read this countless* times, in blogs, threads, etc., so I", "a hotend, using separate parts, sourced on eBay, from China,", "an E3D hotend, or am I living in cloud cuckoo", "upgraded to a genuine E3D hotend. After that the prints", "extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming that the parts that I receive", "to say the: * Throat (with Teflon lining) * Heating", "individual parts from China, for a dollar apiece, that is", "Now, obviously/presumably, there is some quite rigorous QA and testing", "that it is not possible. I realise that if the", "initial machining set ups and this is reflected in the", "opinions are always welcome - but I just want to", "parts are not finished correctly, and end up with burring", "answers, in order to stay within SE rules - although", "it possible to build a hotend, using separate parts, sourced", "quality print? --- In my opinion, the E3D V6 hotend", "anyone has first hand (positive or negative) experience of this.", "is not possible. I realise that if the parts are", "that people were experiencing extrusion problems, shoddy prints, etc, from", "* Throat (with Teflon lining) * Heating block * Heatsink", "assuming that the parts that I receive are machined, and", "printer, until they finally shelled out the cash and upgraded", "and machining shops, in SE Asia. I have read so", "that the prints were much improved. I have read this", "separate parts, sourced on eBay, from China, and still achieve", "they finally shelled out the cash and upgraded to a", "to [How long is an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming that", "prints, etc, from their cheap printer, until they finally shelled", "[tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How long is an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However,", "to mind. However, I wondered if I sourced the individual", "shelled out the cash and upgraded to a genuine E3D", "have any good pointers and/or tips? NOTE: This question is", "parts that I receive are machined, and finished, correctly then", "lining) Heating block * Heatsink * Nozzle * Pneumatic", "still achieve a high quality print? --- In my opinion,", "However, I wondered if I sourced the individual parts from", "I have read so many times that people were experiencing", "SE rules - although opinions are always welcome - but", "many times* that people were experiencing extrusion problems, shoddy prints,", "on eBay, from China, and still achieve a high quality", "high quality print? --- In my opinion, the E3D V6", "is not really after opinionated answers, in order to stay", "performs as well as, or even out performs, an E3D", "to a genuine E3D hotend. After that the prints were", "the expression, you get what you pay for, springs to", "build, and they have to pay for their research costs", "eBay, from China, and still achieve a high quality print?", "after opinionated answers, in order to stay within SE rules", "rather expensive, at $/£70, especially to those building to a", "Has anyone actually done this? Is tinkering with hotends a", "done this? Is tinkering with hotends a done thing? Does", "machining set ups and this is reflected in the high", "Nozzle * Pneumatic connector (PC4-05/PC4-M06) * Heater * Thermistor could", "their cheap printer, until they finally shelled out the cash", "TL;DR Is it possible to build a hotend, using separate", "finally shelled out the cash and upgraded to a genuine", "to those building to a tight budget. Now, obviously/presumably, there", "machined, and finished, correctly then there should not be a", "finished correctly, and end up with burring on the inside", "blogs, threads, etc., so I presume that it is not", "so I presume that it is not possible. I realise", "really after opinionated answers, in order to stay within SE", "a tight budget. Now, obviously/presumably, there is some quite rigorous", "were much improved. I have read this countless times, in", "and upgraded to a genuine E3D hotend. After that the", "as, or even out performs, an E3D hotend, or am", "China, and still achieve a high quality print? --- In", "to build a hotend, using separate parts, sourced on eBay,", "times* that people were experiencing extrusion problems, shoddy prints, etc,", "or am I living in cloud cuckoo land? After all,", "E3D hotend, or am I living in cloud cuckoo land?", "China anyway, these days, as most production facilites have moved", "dollar apiece, that is to say the: * Throat (with", "hotends a done thing? Does anyone have any good pointers", "mind. However, I wondered if I sourced the individual parts", "the E3D V6 hotend is rather expensive, at $/£70, especially", "say the: * Throat (with Teflon lining) * Heating block", "if anyone has first hand (positive or negative) experience of", "$/£70, especially to those building to a tight budget. Now,", "there is some quite rigorous QA and testing of the", "wondered if I sourced the individual parts from China, for", "print? --- In my opinion, the E3D V6 hotend is", "out the cash and upgraded to a genuine E3D hotend.", "* Thermistor could I too, end up with a hotend,", "E3D hotend probably come from China anyway, these days, as", "experiencing extrusion problems, shoddy prints, etc, from their cheap printer,", "inside of the throat, nozzle, etc., then the filament will", "high cost. Also, the expression, you get what you pay", "days, as most production facilites have moved from the US/EU", "--- In my opinion, the E3D V6 hotend is rather", "the US/EU to the cheaper manufacturing bases and machining shops,", "for, springs to mind. However, I wondered if I sourced", "especially to those building to a tight budget. Now, obviously/presumably,", "in blogs, threads, etc., so I presume that it is", "opinionated answers, in order to stay within SE rules -", "(with Teflon lining) * Heating block * Heatsink * Nozzle", "hotend, using separate parts, sourced on eBay, from China, and", "building to a tight budget. Now, obviously/presumably, there is some", "production facilites have moved from the US/EU to the cheaper", "land? After all, let's not forget that most, if not,", "Is it possible to build a hotend, using separate parts,", "machining shops, in SE Asia. I have read so many", "with hotends a done thing? Does anyone have any good", "if I sourced the individual parts from China, for a", "all of the parts used in a E3D hotend probably", "is some quite rigorous QA and testing of the build,", "have moved from the US/EU to the cheaper manufacturing bases", "right? Has anyone actually done this? Is tinkering with hotends", "budget. Now, obviously/presumably, there is some quite rigorous QA and", "Heating block Heatsink * Nozzle * Pneumatic connector (PC4-05/PC4-M06)", "hotend. After that the prints were much improved. I have", "bases and machining shops, in SE Asia. I have read", "thing? Does anyone have any good pointers and/or tips? NOTE:", "answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How long is an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming", "most, if not, all of the parts used in a", "connector (PC4-05/PC4-M06) * Heater * Thermistor could I too, end", "achieve a high quality print? --- In my opinion, the", "be a problem, right? Has anyone actually done this? Is", "life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming that the parts that I receive are", "of the throat, nozzle, etc., then the filament will not", "anyway, these days, as most production facilites have moved from", "not extrude correctly. See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How long is", "for their research costs and initial machining set ups and", "if the parts are not finished correctly, and end up", "a E3D hotend probably come from China anyway, these days,", "is an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming that the parts that", "sourced the individual parts from China, for a dollar apiece,", "the individual parts from China, for a dollar apiece, that", "too, end up with a hotend, that performs as well", "is reflected in the high cost. Also, the expression, you", "not possible. I realise that if the parts are not", "that performs as well as, or even out performs, an", "correctly. See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How long is an extruder's/nozzle's", "After all, let's not forget that most, if not, all", "have read so many times* that people were experiencing extrusion", "not, all of the parts used in a E3D hotend", "expression, you get what you pay for, springs to mind.", "that the parts that I receive are machined, and finished,", "I sourced the individual parts from China, for a dollar", "springs to mind. However, I wondered if I sourced the", "all, let's not forget that most, if not, all of", "See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How long is an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/)", "threads, etc., so I presume that it is not possible.", "rules - although opinions are always welcome - but I", "tight budget. Now, obviously/presumably, there is some quite rigorous QA", "end up with burring on the inside of the throat,", "these days, as most production facilites have moved from the", "end up with a hotend, that performs as well as,", "from China anyway, these days, as most production facilites have", "get what you pay for, springs to mind. However, I", "their research costs and initial machining set ups and this", "a genuine E3D hotend. After that the prints were much", "and initial machining set ups and this is reflected in", "block Heatsink * Nozzle * Pneumatic connector (PC4-05/PC4-M06) ", "US/EU to the cheaper manufacturing bases and machining shops, in", "any good pointers and/or tips? NOTE: This question is not", "as most production facilites have moved from the US/EU to", "so many times* that people were experiencing extrusion problems, shoddy", "[How long is an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming that the", "pointers and/or tips? NOTE: This question is not really after", "build a hotend, using separate parts, sourced on eBay, from", "they have to pay for their research costs and initial", "to pay for their research costs and initial machining set", "and/or tips? NOTE: This question is not really after opinionated", "even out performs, an E3D hotend, or am I living", "Pneumatic connector (PC4-05/PC4-M06) * Heater * Thermistor could I too,", "However, assuming that the parts that I receive are machined,", "up with a hotend, that performs as well as, or", "nozzle, etc., then the filament will not extrude correctly. See", "opinion, the E3D V6 hotend is rather expensive, at $/£70,", "as well as, or even out performs, an E3D hotend,", "presume that it is not possible. I realise that if", "done thing? Does anyone have any good pointers and/or tips?", "read so many times that people were experiencing extrusion problems,", "and they have to pay for their research costs and", "Does anyone have any good pointers and/or tips? NOTE: This", "that I receive are machined, and finished, correctly then there", "were experiencing extrusion problems, shoddy prints, etc, from their cheap", "just want to know if anyone has first hand (positive", "then the filament will not extrude correctly. See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988)", "* Heating block * Heatsink * Nozzle * Pneumatic connector", "reflected in the high cost. Also, the expression, you get", "prints were much improved. I have read this countless* times,", "etc, from their cheap printer, until they finally shelled out", "* Heatsink * Nozzle * Pneumatic connector (PC4-05/PC4-M06) * Heater", "parts used in a E3D hotend probably come from China", "in order to stay within SE rules - although opinions", "probably come from China anyway, these days, as most production", "in cloud cuckoo land? After all, let's not forget that", "until they finally shelled out the cash and upgraded to", "E3D V6 hotend is rather expensive, at $/£70, especially to", "After that the prints were much improved. I have read", "hotend probably come from China anyway, these days, as most", "from their cheap printer, until they finally shelled out the", "cash and upgraded to a genuine E3D hotend. After that", "* Heater * Thermistor could I too, end up with", "those building to a tight budget. Now, obviously/presumably, there is", "using separate parts, sourced on eBay, from China, and still", "then there should not be a problem, right? Has anyone", "know if anyone has first hand (positive or negative) experience", "question is not really after opinionated answers, in order to", "and this is reflected in the high cost. Also, the", "this? Is tinkering with hotends a done thing? Does anyone", "come from China anyway, these days, as most production facilites", "Is tinkering with hotends a done thing? Does anyone have", "always welcome - but I just want to know if", "of the parts used in a E3D hotend probably come", "filament will not extrude correctly. See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How", "people were experiencing extrusion problems, shoddy prints, etc, from their", "long is an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming that the parts", "although opinions are always welcome - but I just want", "testing of the build, and they have to pay for", "correctly then there should not be a problem, right? Has", "not really after opinionated answers, in order to stay within", "much improved. I have read this countless times, in blogs," ]
[ "true to invert the logic of the sensor. #define ENDSTOPPULLUP_FIL_RUNOUT", "[, E1[, E2[, E3[, E4]]]] / #define DEFAULT_AXIS_STEPS_PER_UNIT { 100,", "Type * Allen Key Probes, Servo Probes, Z-Sled Probes,", "one of these to use Auto Bed Leveling below. /", "Travel Acceleration / #define DEFAULT_ACCELERATION 3000 // X, Y, Z", "`Config.h` is as follows (clipped due to posting restrictions): ```", "printers will be using one per axis. Probes will use", "fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS", "* M204 P Acceleration * M204 R Retract Acceleration ", "F \| (-) N (+) \| G <-- nozzle (10,10)", "for the presence of filament. * RAMPS-based boards use", "powered (usually inductive) sensors. * * - RAMPS 1.3/1.4 boards", "must travel to pickup the sled. 0 should be fine", "if EEPROM is enabled, saved values will override these. /", "endstop pin. / #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /** * Z_MIN_PROBE_ENDSTOP * ", "#endif /* * Enable if probing seems unreliable. Heaters and/or", "in response to movement commands. //#define MAX_SOFTWARE_ENDSTOPS /** * Filament", "the firmware assumes HIGH = has filament, LOW = ran", "\| (+) P \| R <-- probe (20,20) * E", "any (negative) * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851,", "accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting Stepper Enable Pins (Active", "Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic", "#define INVERT_X_DIR false #define INVERT_Y_DIR false #define INVERT_Z_DIR false //", "Unit (steps/mm) * Override with M92 * X, Y, Z,", "Movement Settings ============================ //============================================================================= // @section motion /** * Default", "Z-axis motors. Specifically, the Z-axis will move down (and trigger", "being used. // WARNING: When motors turn off there is", "DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 2.0 //=========================================================================== //============================= Z Probe Options", "travel (non printing) moves /** * Default Jerk (mm/s) ", "(0, 0). X and Y offsets must be integers.", "M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST //", "probe-switch.) / #define FIX_MOUNTED_PROBE /* * Z Servo Probe, such", "Inverted the motor direction in software and they also only", "to invert the logic of the sensor. #define ENDSTOPPULLUP_FIL_RUNOUT //", "#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the", "false // @section homing //#define Z_HOMING_HEIGHT 4 // (in mm)", "M203 * X, Y, Z, E0 [, E1[, E2[, E3[,", "Leveling without a probe. * Use G29 repeatedly, adjusting the", "offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z", "except Z-Min. * (By default Marlin assumes the Z-Max endstop", "-20 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test", "pin: * - For simple switches connect... * - normally-closed", "are connected to any endstop or probe. // Almost all", "extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false", "currently disabled, as I try to set the printer up.", "homework. * / //#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN Z_MAX_PIN /* ", "#define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48", "will be using one per axis. Probes will use one", "enabled, axes won't move above MAX_POS in response to movement", "the end of the build of a i3 MK2 clone", "the motor connector) if an axis goes the wrong way.", "CLEARANCE of 2 => 2mm from bed to nozzle. /", "below - will be disabled during probing so as to", "pin (SOL1_PIN) //#define SOLENOID_PROBE // A sled-mounted probe like those", "false // set to true to invert the logic of", "/** * Default Settings * * These settings can be", "3000, 3000, 100, 10000 } /** * Default Acceleration (change/s)", "z-axis motor wires and they only go up. Inverted the", "Acceleration (change/s) change = mm/s * (Maximum start speed for", "use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. ", "to the rest. / //#define DISTINCT_E_FACTORS /** * Default Axis", "1.1.3 with a RAMPS 1.4. Both motors turn and I've", "the Z height at each point with movement commands ", "DEFAULT_EJERK 2.0 //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== //", " Override with M92 * X, Y, Z, E0 [,", "* Note that if EEPROM is enabled, saved values will", "all the endstop connectors that are connected to any endstop", "http://marlinfw.org/configuration/probes.html // /** * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * * Enable this option", "@section extruder #define DISABLE_E false // For all extruders #define", "/** * Z_MIN_PROBE_ENDSTOP * * Enable this option for a", "With this option each E stepper can have its own", "probe (or * lower the bed). The values set here", "* #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * ", "that are connected to any endstop or probe. // Almost", "Mechanical endstop with COM to ground and NC to Signal", "pickup the sled. 0 should be fine but you can", "are given than the total number of extruders, the", "direction in software and they also only go up. Any", "settings can be reset by M502 * * Note that", "Probe either doesn't deploy or needs manual deployment. * (e.g.,", "Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points // For", "i3 MK2 clone and have run into a problem with", "Z E * * \"Jerk\" specifies the minimum speed change", "#define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG", "pin, set Z_MIN_PROBE_PIN below. * * - The simplest option", "probe. * Use G29 repeatedly, adjusting the Z height at", "ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define", "given than the * total number of extruders, the last", "below. * * - The simplest option is to use", "motors. Specifically, the Z-axis will move down (and trigger the", "nozzle (X,Y) offset, relative to (0, 0). * X and", "PROBING_FANS_OFF // Turn fans off when probing // A probe", "doesn't deploy or needs manual deployment. * (e.g., an inductive", "= ran out / //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING", "Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm", "\| \| H \| (-) \| T * \|", "move it up. `M119` shows all endstops open. Min software", "deploying, stowing, and moving between * probe points to avoid", "200 // If enabled, axes won't move below MIN_POS in", "a quick noise if I try to move it up.", "extruders // Disables axis stepper immediately when it's not being", "it will only make a quick noise if I try", "/** * Z Servo Probe, such as an endstop switch", "DISABLE_E false // For all extruders #define DISABLE_INACTIVE_EXTRUDER true //", "ENDSTOPPULLUPS // Comment this out (using // at the start", "wires). This is likely most useful to users of the", "(10,10) * T \| \| H * \| (-) \|", "solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE // A sled-mounted probe like", "* RAMPS-based boards use SERVO3_PIN. * For other boards you", "Low) use 0, Non Inverting (Active High) use 1 //", "may use the 5V, GND, and Aux4->D32 pin: * -", "Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000", "values will override these. / /* * With this option", "* Z probes require clearance when deploying, stowing, and moving", "enabled endstop pins are interrupt-capable. // This will remove the", "if the sensor is defined. #define FILAMENT_RUNOUT_SCRIPT \"M600\" #endif ```", "height before homing (G28) for Z clearance above the bed,", "on display about possibly reduced accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING // @section", "Z probes require clearance when deploying, stowing, and moving between", "source of the 'noise' (the change * in current flowing", "here apply over and above any (negative) * probe Z", "//#define Z_MIN_PROBE_PIN Z_MAX_PIN /** * Probe Type * * Allen", "(with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Speed for the \"accurate\"", "(SOL1_PIN) //#define SOLENOID_PROBE // A sled-mounted probe like those designed", "undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG", "``` //=========================================================================== //============================== Endstop Settings =========================== //=========================================================================== // @section homing", "double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Speed for the", "* Example: `M851 Z-5` with a CLEARANCE of 4 =>", "When motors turn off there is a chance of losing", "* (By default Marlin assumes the Z-Max endstop pin.) ", "============================= //=========================================================================== // @section probes // // See http://marlinfw.org/configuration/probes.html //", "and above any (negative) probe Z Offset set with", "//#define USE_ZMAX_PLUG // coarse Endstop Settings //#define ENDSTOPPULLUPS // Comment", "to avoid hitting the bed and other hardware. * Servo-mounted", "* * +-- BACK ---+ * \| \| * L", "#define Y_ENABLE_ON 0 #define Z_ENABLE_ON 0 #define E_ENABLE_ON 0 //", "between probes #define XY_PROBE_SPEED 8000 // Speed for the first", "Override with M203 * X, Y, Z, E0 [, E1[,", "switches connect... * - normally-closed switches to GND and D32.", "-below +above [the nozzle] // X and Y axis travel", "speed change that requires acceleration. * When changing speed and", "0 #define Y_ENABLE_ON 0 #define Z_ENABLE_ON 0 #define E_ENABLE_ON 0", "the Z-axis motors. Specifically, the Z-axis will move down (and", "moves) * Override with M201 * X, Y, Z, E0", "the * total number of extruders, the last value applies", "//=========================================================================== // @section homing // Specify here all the endstop", "* BLTouch probe, but may also help those with inductive", "//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles", "M502 * * Note that if EEPROM is enabled, saved", "nozzle] // X and Y axis travel speed (mm/m) between", "#define DISABLE_Y false #define DISABLE_Z false // Warn on display", "moves /** * Default Jerk (mm/s) * Override with M205", "/ #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.4", "Servo-mounted probes require extra space for the arm to rotate.", "the bed). The values set here apply over and above", "acceleration for travel (non printing) moves /* * Default Jerk", "#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration", "stepper direction. Change (or reverse the motor connector) if an", "endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert", "// (ms) Enable and increase if needed #endif /** ", "this option for a probe connected to the Z Min", "//============================================================================= //============================== Movement Settings ============================ //============================================================================= // @section motion /", "to check for the presence of filament. * RAMPS-based", "probes need space to keep from triggering early. * ", "(units are in mm) #define X_MIN_POS 0 #define Y_MIN_POS 0", "may happen instantaneously. / #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0", "to move it up. `M119` shows all endstops open. Min", "false #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false", "// Warn on display about possibly reduced accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING", "a CLEARANCE of 4 => 9mm from bed to nozzle.", "Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. ", "to use a free endstop connector. - Use 5V", "points to avoid hitting the bed and other hardware. ", "@section motion /* * Default Settings * * These settings", "invert the logic of the sensor. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment", "if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX", "BLTouch probe uses a Hall effect sensor and emulates a", "#define DISABLE_E false // For all extruders #define DISABLE_INACTIVE_EXTRUDER true", "Override with M92 * X, Y, Z, E0 [, E1[,", "ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define", "disable the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop", "enabled. // @section machine // Invert the stepper direction. Change", "non-probe purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG", "apply over and above any (negative) * probe Z Offset", "//#define PROBING_FANS_OFF // Turn fans off when probing // A", "up. Inverted the motor direction in software and they also", "can have its own factors for the * following movement", "a Hall effect sensor and emulates a servo. / //#define", "the minimum speed change that requires acceleration. When changing", "the last value applies to the rest. / //#define DISTINCT_E_FACTORS", "// WARNING: When motors turn off there is a chance", "Enable if probing seems unreliable. Heaters and/or fans - consistent", "enabled, saved values will override these. / /** * With", "give a range for adjusting the Z probe offset #define", "LOW = ran out / //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define", "due to posting restrictions): ``` //=========================================================================== //============================== Endstop Settings ===========================", "//#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with COM to ground", "5 // The extra distance the X axis must travel", "and they also only go up. Any advice? I've definitely", "the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y offset: -front +behind", "/ //#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector.", "Enable Pins (Active Low) use 0, Non Inverting (Active High)", "the rest. / //#define DISTINCT_E_FACTORS /* * Default Axis Steps", "deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.)", "//#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif //", "- The simplest option is to use a free endstop", "more of the // extra connectors. Leave undefined any used", "mm/s * (Maximum start speed for accelerated moves) * Override", "* Override with M201 * X, Y, Z, E0 [,", "logic of the probe. // Enable this feature if all", "probing //#define PROBE_DOUBLE_TOUCH /** * Z probes require clearance when", "the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST", "invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false //", "this distance over your Z_MAX_POS in case. // Direction of", "reset by M502 * * Note that if EEPROM is", "start of the line) to disable the endstop pullup resistors", "10.0 #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 2.0 //=========================================================================== //============================= Z", "quieting/silencing the source of the 'noise' (the change * in", "if an axis goes the wrong way. #define INVERT_X_DIR false", "// /** * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * * Enable this option for", "SERVO 0 connector. //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy", "DISABLE_Z false // Warn on display about possibly reduced accuracy", "repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST // For", "X-axis carriage. Additional test: reversed the z-axis motor wires and", "(X,Y) offset, relative to (0, 0). * X and Y", "Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic", "//#define DISTINCT_E_FACTORS /** * Default Axis Steps Per Unit (steps/mm)", "minimize * potential EM interference by quieting/silencing the source of", "to poll the interrupt pins, saving many CPU cycles. //#define", "ENABLED(BLTOUCH) //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if", "each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // Use double", "each point with movement commands * or (with LCD_BED_LEVELING) the", "to use internal pullup for filament runout pins if the", "/ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } /", "the following example the X and Y offsets are both", "DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } /* * Default", "Acceleration / #define DEFAULT_ACCELERATION 3000 // X, Y, Z and", "and potentially disastrous consequences. Use with caution and do", "=========================== //=========================================================================== // @section homing // Specify here all the", "try to set the printer up. Using Marlin 1.1.3 with", "these. / /* * With this option each E stepper", "a i3 MK2 clone and have run into a problem", "X and Y offsets are both positive: * #define X_PROBE_OFFSET_FROM_EXTRUDER", "endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1", "movement commands. //#define MIN_SOFTWARE_ENDSTOPS // If enabled, axes won't move", "also help those with inductive or other probe types. /", "keep from triggering early. * Use these settings to", "I try to set the printer up. Using Marlin 1.1.3", "and do your homework. * / //#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN", " * Note that if EEPROM is enabled, saved values", "* When changing speed and direction, if the difference is", "5 // Z Clearance between probe points // For M851", "* Default Axis Steps Per Unit (steps/mm) * Override with", "// Almost all printers will be using one per axis.", "probes #define XY_PROBE_SPEED 8000 // Speed for the first approach", "to keep from triggering early. * * Use these settings", "PROBE_DOUBLE_TOUCH /** * Z probes require clearance when deploying, stowing,", "to 5V and D32. * * WARNING: Setting the wrong", "invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false //", "endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert", "pullups. will be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX", "only go up. Inverted the motor direction in software and", "// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** ", "with the options selected below - will be disabled", "acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z", "Only integer values >= 1 are valid here. * ", "set to true, for geared extruder set to false. #define", "the entire X-axis carriage. Additional test: reversed the z-axis motor", "G29 repeatedly, adjusting the Z height at each point with", "3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 //", "at the start of the line) to disable the endstop", "to GND and D32. - normally-open switches to 5V", "* Z Servo Probe, such as an endstop switch on", "Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing", "//=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== // @section probes", "Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X", "// @section extruder #define DISABLE_E false // For all extruders", "needed #endif /** * Enable if probing seems unreliable. Heaters", "22 // X offset: -left +right [of the nozzle] #define", "direction. Change (or reverse the motor connector) if an axis", "wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR false #define INVERT_Z_DIR", "RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32", "// @section homing // Specify here all the endstop connectors", "Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance", "(using // at the start of the line) to disable", "a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE // A sled-mounted probe", "Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 //", "#define X_PROBE_OFFSET_FROM_EXTRUDER 22 // X offset: -left +right [of the", "INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR", "offset: -below +above [the nozzle] // X and Y axis", "0 #define X_MAX_POS 230 #define Y_MAX_POS 200 #define Z_MAX_POS 200", "seems unreliable. Heaters and/or fans - consistent with the ", "the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings:", "// Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1]", "interference by quieting/silencing the source of the 'noise' (the change", "for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for", "Settings * These settings can be reset by M502", "raise the probe (or * lower the bed). The values", "value applies to the rest. / //#define DISTINCT_E_FACTORS /* ", "searches but haven't solved the problem. `Config.h` is as follows", "boards may use the 5V, GND, and Aux4->D32 pin: ", "assumes the Z-Max endstop pin.) * To use a custom", "INVERT_E4_DIR false // @section homing //#define Z_HOMING_HEIGHT 4 // (in", "to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false", "#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the", "be fine but you can push it further if you'd", "an axis goes the wrong way. #define INVERT_X_DIR false #define", "Z-Sled Probes, FIX_MOUNTED_PROBE, etc. * You must activate one of", "probing //#define PROBING_FANS_OFF // Turn fans off when probing //", "(negative) * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or", "Aux4->D32 pin: * - For simple switches connect... * -", "@section probes // // See http://marlinfw.org/configuration/probes.html // /** * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN", "#define E_ENABLE_ON 0 // For all extruders // Disables axis", "Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN Z_MAX_PIN /** * Probe Type * ", "\"accurate\" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)", "and I've even uncoupled the entire X-axis carriage. Additional test:", "E2[, E3[, E4]]]] / #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100,", "here. * * Example: `M851 Z-5` with a CLEARANCE of", "BACK ---+ * \| \| * L \| (+) P", "purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define", "8000 // Speed for the first approach when double-probing (with", "consistent with the * options selected below - will be", "#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //", "point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // Use double touch", "drive extruder v9 set to true, for geared extruder set", "// Comment this out (using // at the start of", "Change (or reverse the motor connector) if an axis goes", "use 0, Non Inverting (Active High) use 1 // :{", "nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the", "axes won't move above MAX_POS in response to movement commands.", "when probing // A probe that is deployed and stowed", "have this distance over your Z_MAX_POS in case. // Direction", "inductive probe or a nozzle-based probe-switch.) / #define FIX_MOUNTED_PROBE /", "endstop pins are interrupt-capable. // This will remove the need", "wires and they only go up. Inverted the motor direction", "E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_FEEDRATE {", "homing (G28) for Z clearance above the bed, clamps, ...", "the 5V, GND, and Aux4->D32 pin: * - For simple", "// For M851 give a range for adjusting the Z", "Stepper Enable Pins (Active Low) use 0, Non Inverting (Active", "invert the logic of the probe. // Enable this feature", "true to invert the logic of the probe. // Enable", "#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 4000, 120 } /** ", "the endstop connectors that are connected to any endstop or", "- will be disabled during probing so as to minimize", "between probe points to avoid hitting the bed and", "value set here, it may happen instantaneously. / #define DEFAULT_XJERK", "// Z offset: -below +above [the nozzle] // X and", " - RAMPS 1.3/1.4 boards may use the 5V, GND,", "probe like those designed by Charles Bell. //#define Z_PROBE_SLED //#define", "you can push it further if you'd like. // //", "used. // WARNING: When motors turn off there is a", "probe connected to the Z Min endstop pin. / #define", "Axis Steps Per Unit (steps/mm) Override with M92 ", "/ /** * With this option each E stepper can", "Acceleration (change/s) change = mm/s * Override with M204 ", "/ #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E", "INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false // @section", "Min endstop pin. / #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /* * Z_MIN_PROBE_ENDSTOP ", "the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to", "a probe connected to any pin except Z-Min. (By", "* probe points to avoid hitting the bed and other", "only go up. Any advice? I've definitely done a few", "off when probing // A probe that is deployed and", "advice? I've definitely done a few searches but haven't solved", "endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is", "offsets must be integers. * * In the following example", "sensor. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for", "few searches but haven't solved the problem. `Config.h` is as", "The \"Manual Probe\" provides a means to do \"Auto\" Bed", "* Override with M204 * * M204 P Acceleration ", "Z_MIN_PROBE_ENDSTOP * Enable this option for a probe connected", "probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting Stepper Enable Pins", "Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] //", "machine // Invert the stepper direction. Change (or reverse the", "the // extra connectors. Leave undefined any used for non-endstop", "R <-- probe (20,20) * E \| \| I ", "changing speed and direction, if the difference is less than", "to nozzle. But: `M851 Z+1` with a CLEARANCE of", "Travel limits after homing (units are in mm) #define X_MIN_POS", "/** * Probe Type * * Allen Key Probes, Servo", "Override with M204 * * M204 P Acceleration * M204", "(clipped due to posting restrictions): ``` //=========================================================================== //============================== Endstop Settings", "#define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false //", "* * M204 P Acceleration * M204 R Retract Acceleration", "Deploy and Stow angles /** * The BLTouch probe uses", "// at the start of the line) to disable the", "Use these settings to specify the distance (mm) to raise", "servo. / //#define BLTOUCH #if ENABLED(BLTOUCH) //#define BLTOUCH_DELAY 375 //", "other probe types. / //#define PROBING_HEATERS_OFF // Turn heaters off", "E2[, E3[, E4]]]] / #define DEFAULT_MAX_FEEDRATE { 200, 200, 3,", "before homing (G28) for Z clearance above the bed, clamps,", "means to do \"Auto\" Bed Leveling without a probe. ", "M204 P Acceleration * M204 R Retract Acceleration * M204", "DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. //", "use 1 // :{ 0:'Low', 1:'High' } #define X_ENABLE_ON 0", "false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false #define INVERT_E2_DIR false", "These settings can be reset by M502 * * Note", "* The \"Manual Probe\" provides a means to do \"Auto\"", "\"Auto\" Bed Leveling without a probe. * Use G29 repeatedly,", "Override with M205 X Y Z E * * \"Jerk\"", "} /** * Default Max Feed Rate (mm/s) * Override", "below. / /* * The \"Manual Probe\" provides a means", "Z_MAX_PIN /** * Probe Type * * Allen Key Probes,", "of the 'noise' (the change * in current flowing through", "mm) #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0", "need to define FIL_RUNOUT_PIN. * By default the firmware assumes", "endstop connectors that are connected to any endstop or probe.", "Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000", "the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set", "/ #define DEFAULT_MAX_FEEDRATE { 200, 200, 3, 25 } /", "as I try to set the printer up. Using Marlin", "invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true //", "X_ENABLE_ON 0 #define Y_ENABLE_ON 0 #define Z_ENABLE_ON 0 #define E_ENABLE_ON", "20 // Enable the M48 repeatability test to test probe", "switch on a rotating arm. / //#define Z_ENDSTOP_SERVO_NR 0 //", "E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y,", "off there is a chance of losing position accuracy! #define", "true, for geared extruder set to false. #define INVERT_E0_DIR false", "a CLEARANCE of 2 => 2mm from bed to nozzle.", "move above MAX_POS in response to movement commands. //#define MAX_SOFTWARE_ENDSTOPS", "through the wires). This is likely most useful to users", "- normally-open switches to 5V and D32. * * WARNING:", "early. * * Use these settings to specify the distance", "following movement settings. If fewer factors are given than the", "1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR -1", "invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true //", "--+ * (0,0) / #define X_PROBE_OFFSET_FROM_EXTRUDER 22 // X offset:", " * WARNING: Setting the wrong pin may have unexpected", "of these to use Auto Bed Leveling below. / /", "INVERT_X_DIR false #define INVERT_Y_DIR false #define INVERT_Z_DIR false // Enable", "logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to", "#define INVERT_E0_DIR false #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define", "instantaneously. / #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK", "endstop connector. * - Use 5V for powered (usually inductive)", "@section extruder // For direct drive extruder v9 set to", "-left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y", "and NC to Signal uses \"false\" here (most common setup).", "probe (20,20) * E \| \| I * F \|", "distance the X axis must travel to pickup the sled.", "* (0,0) / #define X_PROBE_OFFSET_FROM_EXTRUDER 22 // X offset: -left", "\| G <-- nozzle (10,10) T \| \| H", "presence of filament. * * RAMPS-based boards use SERVO3_PIN. ", "#define X_ENABLE_ON 0 #define Y_ENABLE_ON 0 #define Z_ENABLE_ON 0 #define", "set to true to invert the logic of the probe.", "noise if I try to move it up. `M119` shows", "the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to", "retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for", "//============================== Movement Settings ============================ //============================================================================= // @section motion /* ", "geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR", "I've definitely done a few searches but haven't solved the", "M201 X, Y, Z, E0 [, E1[, E2[, E3[,", "motors turn off there is a chance of losing position", "restrictions): ``` //=========================================================================== //============================== Endstop Settings =========================== //=========================================================================== // @section", "a probe. * Use G29 repeatedly, adjusting the Z height", "sled-mounted probe like those designed by Charles Bell. //#define Z_PROBE_SLED", "Probe, such as an endstop switch on a rotating arm.", "Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y offset: -front +behind [the nozzle] #define", "@section machine // Invert the stepper direction. Change (or reverse", "Defaults to SERVO 0 connector. //#define Z_SERVO_ANGLES {70,0} // Z", "the endstop) but it will only make a quick noise", "Specify here all the endstop connectors that are connected to", "(-) N (+) \| G <-- nozzle (10,10) * T", "to true, for geared extruder set to false. #define INVERT_E0_DIR", "(e.g., an inductive probe or a nozzle-based probe-switch.) / #define", "probe uses a Hall effect sensor and emulates a servo.", "If fewer factors are given than the total number", "the line) to disable the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS)", "poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE", "when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Speed for", "increase if needed #endif /** * Enable if probing seems", "accuracy! #define DISABLE_X false #define DISABLE_Y false #define DISABLE_Z false", "* - Use 5V for powered (usually inductive) sensors. ", "//#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop", "stepper immediately when it's not being used. // WARNING: When", "PROBE_MANUALLY /* * A Fix-Mounted Probe either doesn't deploy or", "nozzle. / #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow", "#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel", "motor direction in software and they also only go up.", "those with inductive or other probe types. / //#define PROBING_HEATERS_OFF", "* A Fix-Mounted Probe either doesn't deploy or needs manual", "probe connected to any pin except Z-Min. * (By default", "SERVO3_PIN. * For other boards you may need to define", "X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic", "sled. 0 should be fine but you can push it", "use SERVO3_PIN. * For other boards you may need to", "E2[, E3[, E4]]]] / #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 4000,", "I've even uncoupled the entire X-axis carriage. Additional test: reversed", "Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. You must activate one", "the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set", "resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will", "option for a probe connected to any pin except Z-Min.", "set Z_MIN_PROBE_PIN below. * * - The simplest option is", "out / //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false //", "false #define INVERT_E4_DIR false // @section homing //#define Z_HOMING_HEIGHT 4", "/ #define FIX_MOUNTED_PROBE /** * Z Servo Probe, such as", "//#define CONFIG_STEPPERS_TOSHIBA // @section extruder // For direct drive extruder", "that requires acceleration. * When changing speed and direction, if", "rest. / //#define DISTINCT_E_FACTORS /* * Default Axis Steps Per", "@section homing //#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z", "is enabled, saved values will override these. / /* ", "/ //#define PROBING_HEATERS_OFF // Turn heaters off when probing //#define", "* - For simple switches connect... * - normally-closed switches", "* Default Acceleration (change/s) change = mm/s * Override with", "R Retract Acceleration * M204 T Travel Acceleration / #define", "/* * Default Jerk (mm/s) * Override with M205 X", "Z_MIN_PROBE_PIN Z_MAX_PIN /** * Probe Type * * Allen Key", "Y_MAX_POS 200 #define Z_MAX_POS 200 // If enabled, axes won't", "for accelerated moves) * Override with M201 * X, Y,", "// Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0", "if needed #endif /** * Enable if probing seems unreliable.", "connector) if an axis goes the wrong way. #define INVERT_X_DIR", "Y Z E * * \"Jerk\" specifies the minimum speed", "speed (mm/m) between probes #define XY_PROBE_SPEED 8000 // Speed for", "//#define MIN_SOFTWARE_ENDSTOPS // If enabled, axes won't move above MAX_POS", "MIN_SOFTWARE_ENDSTOPS // If enabled, axes won't move above MAX_POS in", "the start of the line) to disable the endstop pullup", "common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to", "with M205 X Y Z E * * \"Jerk\" specifies", "both positive: * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10", "#define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * * +--", "to Signal uses \"false\" here (most common setup). #define X_MIN_ENDSTOP_INVERTING", "FIX_MOUNTED_PROBE, etc. * You must activate one of these to", "set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false #define", "speed and direction, if the difference is less than the", "to do \"Auto\" Bed Leveling without a probe. * Use", "#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]", "Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define", "test: reversed the z-axis motor wires and they only go", "position accuracy! #define DISABLE_X false #define DISABLE_Y false #define DISABLE_Z", "to nozzle. / #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for", "with COM to ground and NC to Signal uses \"false\"", "Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. Only integer values >=", "clearance above the bed, clamps, ... // Be sure you", "a servo. / //#define BLTOUCH #if ENABLED(BLTOUCH) //#define BLTOUCH_DELAY 375", "// Uncomment to use internal pullup for filament runout pins", "done a few searches but haven't solved the problem. `Config.h`", "quick noise if I try to move it up. `M119`", "E3[, E4]]]] / #define DEFAULT_MAX_FEEDRATE { 200, 200, 3, 25", "true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING", "X, Y, Z and E acceleration for printing moves #define", "+above [the nozzle] // X and Y axis travel speed", "to use Auto Bed Leveling below. / /* * The", "or the LCD. * Only integer values >= 1 are", "false #define INVERT_Y_DIR false #define INVERT_Z_DIR false // Enable this", "to movement commands. //#define MAX_SOFTWARE_ENDSTOPS /** * Filament Runout Sensor", "DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will be ignored", "Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. * You must activate", "or more of the // extra connectors. Leave undefined any", "defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define", "sensor and emulates a servo. / //#define BLTOUCH #if ENABLED(BLTOUCH)", "of a i3 MK2 clone and have run into a", "(mm/s) Override with M203 * X, Y, Z, E0", "-1=MIN // :[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR -1 #define", "5V for powered (usually inductive) sensors. * * - RAMPS", "Auto Bed Leveling below. / /* * The \"Manual Probe\"", "* Default Jerk (mm/s) * Override with M205 X Y", "pins are interrupt-capable. // This will remove the need to", "// For direct drive extruder v9 set to true, for", "connectors that are connected to any endstop or probe. //", "you have this distance over your Z_MAX_POS in case. //", "For M851 give a range for adjusting the Z probe", "* Z Probe to nozzle (X,Y) offset, relative to (0,", "//#define SOLENOID_PROBE // A sled-mounted probe like those designed by", "{70,0} // Z Servo Deploy and Stow angles /** ", "of the sensor. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal", "and emulates a servo. / //#define BLTOUCH #if ENABLED(BLTOUCH) //#define", "X_HOME_DIR -1 #define Y_HOME_DIR -1 #define Z_HOME_DIR -1 // @section", "inductive or other probe types. / //#define PROBING_HEATERS_OFF // Turn", "X_PROBE_OFFSET_FROM_EXTRUDER 22 // X offset: -left +right [of the nozzle]", "+behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below", "but it will only make a quick noise if I", "Marlin 1.1.3 with a RAMPS 1.4. Both motors turn and", "free endstop connector. - Use 5V for powered (usually", "z height before homing (G28) for Z clearance above the", "with caution and do your homework. * / //#define Z_MIN_PROBE_ENDSTOP", "nozzle (10,10) T \| \| H * \| (-)", "//#define MAX_SOFTWARE_ENDSTOPS /** * Filament Runout Sensor * A mechanical", "FIX_MOUNTED_PROBE /** * Z Servo Probe, such as an endstop", "(change/s) change = mm/s * Override with M204 * ", "/* * The \"Manual Probe\" provides a means to do", "point with movement commands * or (with LCD_BED_LEVELING) the LCD", "motor wires and they only go up. Inverted the motor", "probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) //", "-1 #define Z_HOME_DIR -1 // @section machine // Travel limits", "fans - consistent with the * options selected below -", "* \"Jerk\" specifies the minimum speed change that requires acceleration.", "Max Acceleration (change/s) change = mm/s * (Maximum start speed", "1 are valid here. * * Example: `M851 Z-5` with", "* Enable if probing seems unreliable. Heaters and/or fans -", "endstop is used to check for the presence of filament.", "For direct drive extruder v9 set to true, for geared", "the * BLTouch probe, but may also help those with", "Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic", "approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Speed", "Keep only the active extruder enabled. // @section machine //", "distance over your Z_MAX_POS in case. // Direction of endstops", "0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS 230", "motors turn and I've even uncoupled the entire X-axis carriage.", "A sled-mounted probe like those designed by Charles Bell. //#define", "(Maximum start speed for accelerated moves) * Override with M201", "travel to pickup the sled. 0 should be fine but", "manual deployment. * (e.g., an inductive probe or a nozzle-based", "E stepper can have its own factors for the ", "to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true", "Use with caution and do your homework. / //#define", "test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting Stepper Enable", "problem with the Z-axis motors. Specifically, the Z-axis will move", "filament, LOW = ran out / //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR)", "T Travel Acceleration / #define DEFAULT_ACCELERATION 3000 // X, Y,", "Z, E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_AXIS_STEPS_PER_UNIT", "for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe", "in current flowing through the wires). This is likely most", "axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR", "// Be sure you have this distance over your Z_MAX_POS", "#define X_HOME_DIR -1 #define Y_HOME_DIR -1 #define Z_HOME_DIR -1 //", "Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra", "axes won't move below MIN_POS in response to movement commands.", "M205 X Y Z E * * \"Jerk\" specifies the", "override these. / /* * With this option each E", "ground and NC to Signal uses \"false\" here (most common", "Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between", "and increase if needed #endif /** * Enable if probing", "the LCD. * Only integer values >= 1 are valid", "ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define", "set to true to invert the logic of the sensor.", "by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The", "axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 //", "//#define DISABLE_REDUCED_ACCURACY_WARNING // @section extruder #define DISABLE_E false // For", "likely most useful to users of the * BLTouch probe,", "D32. * * WARNING: Setting the wrong pin may have", "or a nozzle-based probe-switch.) / #define FIX_MOUNTED_PROBE /* * Z", "//#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN", "probes // // See http://marlinfw.org/configuration/probes.html // /** * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN ", "to define FIL_RUNOUT_PIN. By default the firmware assumes HIGH", "than the * value set here, it may happen instantaneously.", "* value set here, it may happen instantaneously. / #define", "the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE //=============================================================================", "to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false", "Y offsets are both positive: #define X_PROBE_OFFSET_FROM_EXTRUDER 10 ", "//============================== Endstop Settings =========================== //=========================================================================== // @section homing // Specify", " WARNING: Setting the wrong pin may have unexpected and", "example the X and Y offsets are both positive: ", "to ground and NC to Signal uses \"false\" here (most", "following example the X and Y offsets are both positive:", "//#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN", "X_MAX_POS 230 #define Y_MAX_POS 200 #define Z_MAX_POS 200 // If", "these to use Auto Bed Leveling below. / /** ", "commands or (with LCD_BED_LEVELING) the LCD controller. / //#define", "the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z", "with a RAMPS 1.4. Both motors turn and I've even", "if I try to move it up. `M119` shows all", "to nozzle (X,Y) offset, relative to (0, 0). X", "boards use SERVO3_PIN. * For other boards you may need", "---+ * \| \| * L \| (+) P \|", "// For Inverting Stepper Enable Pins (Active Low) use 0,", "a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN", "one or more of the // extra connectors. Leave undefined", "change that requires acceleration. * When changing speed and direction,", "BLTouch probe, but may also help those with inductive or", "X and Y offsets must be integers. * * In", "* * Example: `M851 Z-5` with a CLEARANCE of 4", "#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled.", "angles /** * The BLTouch probe uses a Hall effect", "for geared extruder set to false. #define INVERT_E0_DIR false #define", "Z_MAX_POS 200 // If enabled, axes won't move below MIN_POS", "sure you have this distance over your Z_MAX_POS in case.", "and non-probe purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define", "If enabled, axes won't move below MIN_POS in response to", "FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true", "the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to", "#define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // coarse", "Filament Runout Sensor * A mechanical or opto endstop is", "the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set", "10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * * +-- BACK ---+", "#if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will be", "Minimal z height before homing (G28) for Z clearance above", "100, 10000 } /** * Default Acceleration (change/s) change =", "saved values will override these. / /* * With this", "normally-closed switches to GND and D32. * - normally-open switches", "require clearance when deploying, stowing, and moving between * probe", "bed to nozzle. / #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance", "see the Delta example configurations. // /* * Z Probe", "here, it may happen instantaneously. / #define DEFAULT_XJERK 10.0 #define", "H \| (-) \| T * \| \| ", "bed to nozzle. But: `M851 Z+1` with a CLEARANCE", "Default Settings * * These settings can be reset by", "range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20", "but you can push it further if you'd like. //", "it up. `M119` shows all endstops open. Min software stops", "// X, Y, Z and E acceleration for printing moves", "Specifically, the Z-axis will move down (and trigger the endstop)", "Heaters and/or fans - consistent with the * options selected", "settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined", "coarse Endstop Settings //#define ENDSTOPPULLUPS // Comment this out (using", "feature if all enabled endstop pins are interrupt-capable. // This", "Z Min endstop pin. / #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /* * Z_MIN_PROBE_ENDSTOP", "without a probe. * Use G29 repeatedly, adjusting the Z", "// Invert the stepper direction. Change (or reverse the motor", "FRONT --+ * (0,0) / #define X_PROBE_OFFSET_FROM_EXTRUDER 22 // X", "Bed Leveling below. / /** * The \"Manual Probe\" provides", "use one or more of the // extra connectors. Leave", "to users of the * BLTouch probe, but may also", "* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]", "2 => 2mm from bed to nozzle. / #define Z_CLEARANCE_DEPLOY_PROBE", "X axis must travel to pickup the sled. 0 should", "these settings to specify the distance (mm) to raise the", "build of a i3 MK2 clone and have run into", "/ #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /** * Z_MIN_PROBE_ENDSTOP * * Enable this", "software and they also only go up. Any advice? I've", "// Disables axis stepper immediately when it's not being used.", "Enable this option for a probe connected to the Z", "Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // Use double touch for probing", "will be disabled during probing so as to minimize ", " To use a custom Z Probe pin, set Z_MIN_PROBE_PIN", "false // For all extruders #define DISABLE_INACTIVE_EXTRUDER true // Keep", "Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic", "probe. // Enable this feature if all enabled endstop pins", "happen instantaneously. / #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 #define", "To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below.", "or needs manual deployment. (e.g., an inductive probe or", "Acceleration * M204 T Travel Acceleration / #define DEFAULT_ACCELERATION 3000", "probing so as to minimize potential EM interference by", "Signal uses \"false\" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true", "//#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with COM", "P \| R <-- probe (20,20) * E \| \|", "last value applies to the rest. / //#define DISTINCT_E_FACTORS /", "require extra space for the arm to rotate. Inductive", "to set the printer up. Using Marlin 1.1.3 with a", "USE_YMAX_PLUG //#define USE_ZMAX_PLUG // coarse Endstop Settings //#define ENDSTOPPULLUPS //", "* M204 R Retract Acceleration * M204 T Travel Acceleration", "SLED_DOCKING_OFFSET 5 // The extra distance the X axis must", "extruders, the last value applies to the rest. / //#define", "and D32. * WARNING: Setting the wrong pin may", "(0,0) / #define X_PROBE_OFFSET_FROM_EXTRUDER 22 // X offset: -left +right", "option for Toshiba stepper drivers //#define CONFIG_STEPPERS_TOSHIBA // @section extruder", "{ 100, 100, 4000, 120 } /* * Default Max", "distance (mm) to raise the probe (or * lower the", "- consistent with the * options selected below - will", "EEPROM is enabled, saved values will override these. / /", "for a probe connected to any pin except Z-Min. ", "own factors for the * following movement settings. If fewer", "Marlin assumes the Z-Max endstop pin.) * To use a", "unreliable. Heaters and/or fans - consistent with the * options", "5V and D32. * * WARNING: Setting the wrong pin", "* Servo-mounted probes require extra space for the arm to", "The values set here apply over and above any (negative)", "extruders #define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder", "all extruders #define DISABLE_INACTIVE_EXTRUDER true // Keep only the active", "a nozzle-based probe-switch.) / #define FIX_MOUNTED_PROBE /* * Z Servo", "extruder enabled. // @section machine // Invert the stepper direction.", "BLTOUCH #if ENABLED(BLTOUCH) //#define BLTOUCH_DELAY 375 // (ms) Enable and", "is used to check for the presence of filament. ", "Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test", "DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000", "in mm) #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS", "logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to", "of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR", "are currently disabled, as I try to set the printer", "#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the", "and moving between probe points to avoid hitting the", "other hardware. * Servo-mounted probes require extra space for the", "X, Y, Z acceleration for travel (non printing) moves /", "with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE // A sled-mounted", "#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Speed for the \"accurate\" probe of", "//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN Z_MAX_PIN / * Probe Type ", "nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y offset: -front +behind [the", "\| \| I F \| (-) N (+) \|", "for the arm to rotate. * Inductive probes need space", "#define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to", "as follows (clipped due to posting restrictions): ``` //=========================================================================== //==============================", "Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance", "normally-open switches to 5V and D32. * * WARNING: Setting", "Acceleration * M204 R Retract Acceleration * M204 T Travel", "out (using // at the start of the line) to", "of 4 => 9mm from bed to nozzle. * But:", "a means to do \"Auto\" Bed Leveling without a probe.", "designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 //", "// E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X,", "probe points // For M851 give a range for adjusting", "example configurations. // /** * Z Probe to nozzle (X,Y)", "(or * lower the bed). The values set here apply", "//#define BLTOUCH #if ENABLED(BLTOUCH) //#define BLTOUCH_DELAY 375 // (ms) Enable", "@section machine // Travel limits after homing (units are in", "repeatedly, adjusting the Z height at each point with movement", "Probe to nozzle (X,Y) offset, relative to (0, 0). ", "#define FIL_RUNOUT_INVERTING false // set to true to invert the", "true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING", "Y offsets must be integers. * In the following", "axis. Probes will use one or more of the //", "to true to invert the logic of the sensor. #define", "firmware assumes HIGH = has filament, LOW = ran out", "extra space for the arm to rotate. * Inductive probes", "cycles. //#define ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //============================== Movement Settings ============================ //============================================================================= //", "disabled during probing so as to minimize * potential EM", "* potential EM interference by quieting/silencing the source of the", "that if EEPROM is enabled, saved values will override these.", "A probe that is deployed and stowed with a solenoid", "need space to keep from triggering early. * * Use", "turn off there is a chance of losing position accuracy!", "// @section homing //#define Z_HOMING_HEIGHT 4 // (in mm) Minimal", "ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif", "extra connectors. Leave undefined any used for non-endstop and non-probe", "3000, 100, 10000 } /** * Default Acceleration (change/s) change", "* For other boards you may need to define FIL_RUNOUT_PIN.", "Feed Rate (mm/s) * Override with M203 * X, Y,", "* E \| \| I * F \| (-) N", "by quieting/silencing the source of the 'noise' (the change ", "Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting", "other boards you may need to define FIL_RUNOUT_PIN. By", "arm. / //#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0", "the motor direction in software and they also only go", "a probe connected to the Z Min endstop pin. /", "etc. * You must activate one of these to use", "/** * Default Axis Steps Per Unit (steps/mm) * Override", "(the change * in current flowing through the wires). This", "endstops open. Min software stops are currently disabled, as I", "a RAMPS 1.4. Both motors turn and I've even uncoupled", "//#define ENDSTOPPULLUPS // Comment this out (using // at the", "true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING", "your homework. * / //#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN Z_MAX_PIN /", "it's not being used. // WARNING: When motors turn off", "120 } /* * Default Max Feed Rate (mm/s) ", "go up. Inverted the motor direction in software and they", "//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before", "DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 2.0 //=========================================================================== //=============================", "0 should be fine but you can push it further", "EM interference by quieting/silencing the source of the 'noise' (the", "Note that if EEPROM is enabled, saved values will override", "// Z Servo Deploy and Stow angles /* * The", "* * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE,", "Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 //", "(change/s) change = mm/s * (Maximum start speed for accelerated", "all printers will be using one per axis. Probes will", "filament runout pins if the sensor is defined. #define FILAMENT_RUNOUT_SCRIPT", "<-- probe (20,20) * E \| \| I * F", "/ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define", "ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical", "above MAX_POS in response to movement commands. //#define MAX_SOFTWARE_ENDSTOPS /", "trigger the endstop) but it will only make a quick", "problem. `Config.h` is as follows (clipped due to posting restrictions):", "/* * Enable if probing seems unreliable. Heaters and/or fans", "above any (negative) * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER,", "INVERT_Y_DIR false #define INVERT_Z_DIR false // Enable this option for", "travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 // Speed", "// Specify here all the endstop connectors that are connected", "Y, Z, E0 [, E1[, E2[, E3[, E4]]]] / #define", "fine but you can push it further if you'd like.", "or probe. // Almost all printers will be using one", "// Mechanical endstop with COM to ground and NC to", "into a problem with the Z-axis motors. Specifically, the Z-axis", "has filament, LOW = ran out / //#define FILAMENT_RUNOUT_SENSOR #if", "and other hardware. * Servo-mounted probes require extra space for", "to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true", "false #define DISABLE_Y false #define DISABLE_Z false // Warn on", "Probe pin, set Z_MIN_PROBE_PIN below. * * - The simplest", "// @section extruder // For direct drive extruder v9 set", "DISTINCT_E_FACTORS /** * Default Axis Steps Per Unit (steps/mm) ", "#define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS 230 #define", " \| (-) \| T * \| \| * O--", "can push it further if you'd like. // // For", "ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //============================== Movement Settings ============================ //============================================================================= // @section motion", "printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts", "/** * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * * Enable this option for a", "// A sled-mounted probe like those designed by Charles Bell.", "Z-Min. * (By default Marlin assumes the Z-Max endstop pin.)", "stowing, and moving between * probe points to avoid hitting", "current flowing through the wires). This is likely most useful", "with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. * Only integer values", "/ 2) // Use double touch for probing //#define PROBE_DOUBLE_TOUCH", "a chance of losing position accuracy! #define DISABLE_X false #define", "they only go up. Inverted the motor direction in software", "of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true", "E3[, E4]]]] / #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 4000, 120", "100, 100, 4000, 120 } /* * Default Max Feed", "limits after homing (units are in mm) #define X_MIN_POS 0", "// @section probes // // See http://marlinfw.org/configuration/probes.html // /** ", "DISABLE_REDUCED_ACCURACY_WARNING // @section extruder #define DISABLE_E false // For all", "mechanical or opto endstop is used to check for the", "Y, Z acceleration for travel (non printing) moves /* ", "M204 R Retract Acceleration M204 T Travel Acceleration /", "Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define", "used to check for the presence of filament. ", "#if ENABLED(BLTOUCH) //#define BLTOUCH_DELAY 375 // (ms) Enable and increase", " following movement settings. If fewer factors are given than", "the * value set here, it may happen instantaneously. /", "default the firmware assumes HIGH = has filament, LOW =", "============================ //============================================================================= // @section motion /* * Default Settings ", "difference is less than the value set here, it", "Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector. //#define Z_SERVO_ANGLES", "space for the arm to rotate. * Inductive probes need", "* F \| (-) N (+) \| G <-- nozzle", "values set here apply over and above any (negative) ", "(usually inductive) sensors. * - RAMPS 1.3/1.4 boards may", "saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //============================== Movement Settings", "/ /* * The \"Manual Probe\" provides a means to", "* These settings can be reset by M502 * ", "so as to minimize potential EM interference by quieting/silencing", "when deploying, stowing, and moving between * probe points to", "with the Z-axis motors. Specifically, the Z-axis will move down", "USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // coarse Endstop Settings //#define", "be using one per axis. Probes will use one or", "`M119` shows all endstops open. Min software stops are currently", "follows (clipped due to posting restrictions): ``` //=========================================================================== //============================== Endstop", "to specify the distance (mm) to raise the probe (or", "will override these. / /* * With this option each", "* X and Y offsets must be integers. * ", "are in mm) #define X_MIN_POS 0 #define Y_MIN_POS 0 #define", "activate one of these to use Auto Bed Leveling below.", " Default Max Acceleration (change/s) change = mm/s * (Maximum", "to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false", "// Travel limits after homing (units are in mm) #define", "the build of a i3 MK2 clone and have run", "0 connector. //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and", "all extruders // Disables axis stepper immediately when it's not", "MIN_POS in response to movement commands. //#define MIN_SOFTWARE_ENDSTOPS // If", "Comment this out (using // at the start of the", "it further if you'd like. // // For Z_PROBE_ALLEN_KEY see", "down (and trigger the endstop) but it will only make", "in response to movement commands. //#define MIN_SOFTWARE_ENDSTOPS // If enabled,", "//#define ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //============================== Movement Settings ============================ //============================================================================= // @section", "simplest option is to use a free endstop connector. ", "probes require clearance when deploying, stowing, and moving between ", "Y_ENABLE_ON 0 #define Z_ENABLE_ON 0 #define E_ENABLE_ON 0 // For", "option is to use a free endstop connector. * -", "printing) moves /** * Default Jerk (mm/s) * Override with", "the z-axis motor wires and they only go up. Inverted", "E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_AXIS_STEPS_PER_UNIT {", "simple switches connect... - normally-closed switches to GND and", "this option for a probe connected to any pin except", "losing position accuracy! #define DISABLE_X false #define DISABLE_Y false #define", "= mm/s * Override with M204 * * M204 P", "CLEARANCE of 4 => 9mm from bed to nozzle. ", "Z_MIN_PROBE_PIN below. * - The simplest option is to", "3000 // X, Y, Z acceleration for travel (non printing)", "immediately when it's not being used. // WARNING: When motors", "M851 give a range for adjusting the Z probe offset", "that is deployed and stowed with a solenoid pin (SOL1_PIN)", "to any pin except Z-Min. * (By default Marlin assumes", "if probing seems unreliable. Heaters and/or fans - consistent with", "X Y Z E * * \"Jerk\" specifies the minimum", "Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. * You", "v9 set to true, for geared extruder set to false.", "connectors. Leave undefined any used for non-endstop and non-probe purposes.", "DEFAULT_MAX_FEEDRATE { 200, 200, 3, 25 } /** * Default", "/ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set", "of the line) to disable the endstop pullup resistors #if", "false #define DISABLE_Z false // Warn on display about possibly", " - normally-open switches to 5V and D32. * ", "the sensor. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup", "Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Speed for the \"accurate\" probe of each", "// Speed for the \"accurate\" probe of each point #define", "#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the", "E4]]]] / #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 4000, 120 }", "potentially * disastrous consequences. Use with caution and do your", "in software and they also only go up. Any advice?", "probe or a nozzle-based probe-switch.) / #define FIX_MOUNTED_PROBE /* ", "\| I F \| (-) N (+) \| G", "rotating arm. / //#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO", "can be reset by M502 * Note that if", "// Turn heaters off when probing //#define PROBING_FANS_OFF // Turn", "offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the", "#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the", "motion /** * Default Settings * * These settings can", "be disabled during probing so as to minimize * potential", "use internal pullup for filament runout pins if the sensor", "in case. // Direction of endstops when homing; 1=MAX, -1=MIN", "3, 25 } /** * Default Max Acceleration (change/s) change", "and Stow angles /** * The BLTouch probe uses a", "Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting Stepper Enable Pins (Active Low) use", "set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. * Only integer", "USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define", "logic of the sensor. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use", "X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] /", "homing (units are in mm) #define X_MIN_POS 0 #define Y_MIN_POS", "number of extruders, the last value applies to the rest.", "the presence of filament. * RAMPS-based boards use SERVO3_PIN.", "PROBING_HEATERS_OFF // Turn heaters off when probing //#define PROBING_FANS_OFF //", "will only make a quick noise if I try to", "See http://marlinfw.org/configuration/probes.html // /** * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * * Enable this", "with M92 * X, Y, Z, E0 [, E1[, E2[,", "for non-endstop and non-probe purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define", "reduced accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING // @section extruder #define DISABLE_E false", "for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST", "the active extruder enabled. // @section machine // Invert the", "here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to", "consequences. Use with caution and do your homework. * /", "`M851 Z+1` with a CLEARANCE of 2 => 2mm from", "will be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define", "FIL_RUNOUT_PIN. By default the firmware assumes HIGH = has", "* +-- BACK ---+ * \| \| * L \|", "ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout", "make a quick noise if I try to move it", "Y_PROBE_OFFSET_FROM_EXTRUDER 10 * * +-- BACK ---+ * \| \|", ":[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR -1 #define Z_HOME_DIR -1", "Z-5` with a CLEARANCE of 4 => 9mm from bed", ":{ 0:'Low', 1:'High' } #define X_ENABLE_ON 0 #define Y_ENABLE_ON 0", "* * \"Jerk\" specifies the minimum speed change that requires", "you'd like. // // For Z_PROBE_ALLEN_KEY see the Delta example", "// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)", "the X axis must travel to pickup the sled. 0", "375 // (ms) Enable and increase if needed #endif /", "10000 } / * Default Acceleration (change/s) change = mm/s", "E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_FEEDRATE { 200, 200,", "M204 T Travel Acceleration / #define DEFAULT_ACCELERATION 3000 // X,", "option each E stepper can have its own factors for", "only make a quick noise if I try to move", "below MIN_POS in response to movement commands. //#define MIN_SOFTWARE_ENDSTOPS //", "* O-- FRONT --+ * (0,0) / #define X_PROBE_OFFSET_FROM_EXTRUDER 22", "uses a Hall effect sensor and emulates a servo. /", "movement commands * or (with LCD_BED_LEVELING) the LCD controller. /", "Y_HOME_DIR -1 #define Z_HOME_DIR -1 // @section machine // Travel", "if all enabled endstop pins are interrupt-capable. // This will", "NC to Signal uses \"false\" here (most common setup). #define", "(mm) to raise the probe (or lower the bed).", "as an endstop switch on a rotating arm. / //#define", "//#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // coarse Endstop Settings", "// Defaults to SERVO 0 connector. //#define Z_SERVO_ANGLES {70,0} //", " Probe Type * * Allen Key Probes, Servo Probes,", "[the nozzle] // X and Y axis travel speed (mm/m)", "software stops are currently disabled, as I try to set", "=> 2mm from bed to nozzle. / #define Z_CLEARANCE_DEPLOY_PROBE 10", " lower the bed). The values set here apply over", "* Enable this option for a probe connected to the", "#define DEFAULT_EJERK 2.0 //=========================================================================== //============================= Z Probe Options ============================= //===========================================================================", "of 2 => 2mm from bed to nozzle. / #define", "disabled, as I try to set the printer up. Using", "the problem. `Config.h` is as follows (clipped due to posting", "+right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y offset:", "Enable and increase if needed #endif /* * Enable if", "Probe\" provides a means to do \"Auto\" Bed Leveling without", "// @section machine // Travel limits after homing (units are", "#define DISABLE_X false #define DISABLE_Y false #define DISABLE_Z false //", "moving between * probe points to avoid hitting the bed", "requires acceleration. * When changing speed and direction, if the", "any endstop or probe. // Almost all printers will be", "emulates a servo. / //#define BLTOUCH #if ENABLED(BLTOUCH) //#define BLTOUCH_DELAY", "Hall effect sensor and emulates a servo. / //#define BLTOUCH", "filament. * * RAMPS-based boards use SERVO3_PIN. * For other", "USE_ZMAX_PLUG // coarse Endstop Settings //#define ENDSTOPPULLUPS // Comment this", "enabled, axes won't move below MIN_POS in response to movement", "a rotating arm. / //#define Z_ENDSTOP_SERVO_NR 0 // Defaults to", "won't move below MIN_POS in response to movement commands. //#define", "MK2 clone and have run into a problem with the", "12 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER", "[, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_FEEDRATE { 200,", "invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false //", "false #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false", "(Active High) use 1 // :{ 0:'Low', 1:'High' } #define", "ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert", "@section homing // Specify here all the endstop connectors that", "help those with inductive or other probe types. / //#define", "arm to rotate. Inductive probes need space to keep", "This will remove the need to poll the interrupt pins,", "#endif // Mechanical endstop with COM to ground and NC", "the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to", "this option each E stepper can have its own factors", "4 // (in mm) Minimal z height before homing (G28)", "Probes will use one or more of the // extra", "Inverting (Active High) use 1 // :{ 0:'Low', 1:'High' }", "set the printer up. Using Marlin 1.1.3 with a RAMPS", "to posting restrictions): ``` //=========================================================================== //============================== Endstop Settings =========================== //===========================================================================", "Use 5V for powered (usually inductive) sensors. * * -", "its own factors for the * following movement settings. If", "//=========================================================================== // @section probes // // See http://marlinfw.org/configuration/probes.html // /*", "// Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z", "of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to true", "A Fix-Mounted Probe either doesn't deploy or needs manual deployment.", "this option for Toshiba stepper drivers //#define CONFIG_STEPPERS_TOSHIBA // @section", "be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX", "acceleration. When changing speed and direction, if the difference", "clearance when deploying, stowing, and moving between * probe points", "will use one or more of the // extra connectors.", "the Z-Max endstop pin.) * To use a custom Z", "motor connector) if an axis goes the wrong way. #define", "The BLTouch probe uses a Hall effect sensor and emulates", "/** * Filament Runout Sensor * A mechanical or opto", "But: `M851 Z+1` with a CLEARANCE of 2 => 2mm", "invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true //", "with M203 * X, Y, Z, E0 [, E1[, E2[,", "and Aux4->D32 pin: * - For simple switches connect... ", "specify the distance (mm) to raise the probe (or ", "there is a chance of losing position accuracy! #define DISABLE_X", "to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false #define INVERT_E2_DIR", "\| \| * O-- FRONT --+ * (0,0) / #define", "In the following example the X and Y offsets are", "option for a probe connected to the Z Min endstop", "Leveling below. / /** * The \"Manual Probe\" provides a", "when it's not being used. // WARNING: When motors turn", "[the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above", "logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to", "of losing position accuracy! #define DISABLE_X false #define DISABLE_Y false", "(non printing) moves /** * Default Jerk (mm/s) * Override", "stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE // A", "Bed Leveling without a probe. * Use G29 repeatedly, adjusting", "* Override with M205 X Y Z E * ", "when probing //#define PROBING_FANS_OFF // Turn fans off when probing", "X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic", "//#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the", "WARNING: When motors turn off there is a chance of", "reverse the motor connector) if an axis goes the wrong", " (Maximum start speed for accelerated moves) * Override with", "Z-axis will move down (and trigger the endstop) but it", "(ms) Enable and increase if needed #endif /** * Enable", "INVERT_E0_DIR false #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR", "* \| \| * L \| (+) P \| R", "set to true to invert the logic of the endstop.", "GND and D32. * - normally-open switches to 5V and", "to the Z Min endstop pin. / #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /", "Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic", "The extra distance the X axis must travel to pickup", "accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING // @section extruder #define DISABLE_E false //", "Individual pullups. will be ignored if ENDSTOPPULLUPS is defined //#define", "// Z Clearance between probe points // For M851 give", "and they only go up. Inverted the motor direction in", "pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups.", "haven't solved the problem. `Config.h` is as follows (clipped due", "MAX_SOFTWARE_ENDSTOPS /* * Filament Runout Sensor * A mechanical or", "(20,20) * E \| \| I * F \| (-)", "1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin:", "By default the firmware assumes HIGH = has filament, LOW", "#define Z_MIN_POS 0 #define X_MAX_POS 230 #define Y_MAX_POS 200 #define", "* Use G29 repeatedly, adjusting the Z height at each", "should be fine but you can push it further if", "case. // Direction of endstops when homing; 1=MAX, -1=MIN //", "Z_MIN_POS 0 #define X_MAX_POS 230 #define Y_MAX_POS 200 #define Z_MAX_POS", "25 } /** * Default Max Acceleration (change/s) change =", "wrong pin may have unexpected and potentially * disastrous consequences.", "probing seems unreliable. Heaters and/or fans - consistent with the", "#define DEFAULT_MAX_FEEDRATE { 200, 200, 3, 25 } /** ", "users of the BLTouch probe, but may also help", "to (0, 0). * X and Y offsets must be", "#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament", "adjusting the Z height at each point with movement commands", "(Active Low) use 0, Non Inverting (Active High) use 1", "E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_ACCELERATION {", "Enable this option for Toshiba stepper drivers //#define CONFIG_STEPPERS_TOSHIBA //", "entire X-axis carriage. Additional test: reversed the z-axis motor wires", "the X and Y offsets are both positive: #define", "/** * A Fix-Mounted Probe either doesn't deploy or needs", "* Filament Runout Sensor * A mechanical or opto endstop", "- Use 5V for powered (usually inductive) sensors. * ", "INVERT_E3_DIR false #define INVERT_E4_DIR false // @section homing //#define Z_HOMING_HEIGHT", "but may also help those with inductive or other probe", "to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting Stepper", " * Enable this option for a probe connected to", "DISABLE_X false #define DISABLE_Y false #define DISABLE_Z false // Warn", "to movement commands. //#define MIN_SOFTWARE_ENDSTOPS // If enabled, axes won't", "clone and have run into a problem with the Z-axis", "#define INVERT_Y_DIR false #define INVERT_Z_DIR false // Enable this option", "//============================================================================= // @section motion /** * Default Settings * ", "define FIL_RUNOUT_PIN. By default the firmware assumes HIGH =", "- normally-closed switches to GND and D32. * - normally-open", "start speed for accelerated moves) * Override with M201 ", " or (with LCD_BED_LEVELING) the LCD controller. / //#define PROBE_MANUALLY", "any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG #define", "setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert", "disastrous consequences. Use with caution and do your homework. ", "Runout Sensor * A mechanical or opto endstop is used", "a few searches but haven't solved the problem. `Config.h` is", "clamps, ... // Be sure you have this distance over", "needs manual deployment. * (e.g., an inductive probe or a", "between probe points // For M851 give a range for", "/** * Default Max Feed Rate (mm/s) * Override with", "not being used. // WARNING: When motors turn off there", "Z Servo Probe, such as an endstop switch on a", "true // set to true to invert the logic of", "movement settings. If fewer factors are given than the ", "height at each point with movement commands or (with", "logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to", "I try to move it up. `M119` shows all endstops", "Z height at each point with movement commands * or", "Z clearance above the bed, clamps, ... // Be sure", "#define Y_HOME_DIR -1 #define Z_HOME_DIR -1 // @section machine //", "to pickup the sled. 0 should be fine but you", "if you'd like. // // For Z_PROBE_ALLEN_KEY see the Delta", "may also help those with inductive or other probe types.", "-front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset:", "/ //#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN Z_MAX_PIN /* * Probe Type", "// :{ 0:'Low', 1:'High' } #define X_ENABLE_ON 0 #define Y_ENABLE_ON", "posting restrictions): ``` //=========================================================================== //============================== Endstop Settings =========================== //=========================================================================== //", "settings to specify the distance (mm) to raise the probe", "/ #define X_PROBE_OFFSET_FROM_EXTRUDER 22 // X offset: -left +right [of", "Turn heaters off when probing //#define PROBING_FANS_OFF // Turn fans", "move down (and trigger the endstop) but it will only", "E * \"Jerk\" specifies the minimum speed change that", "LCD. * Only integer values >= 1 are valid here.", "line) to disable the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) //", "Z_ENABLE_ON 0 #define E_ENABLE_ON 0 // For all extruders //", "0). * X and Y offsets must be integers. ", "bed). The values set here apply over and above any", "runout pins if the sensor is defined. #define FILAMENT_RUNOUT_SCRIPT \"M600\"", "(steps/mm) Override with M92 * X, Y, Z, E0", "#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the", "Both motors turn and I've even uncoupled the entire X-axis", "turn and I've even uncoupled the entire X-axis carriage. Additional", "Retract Acceleration * M204 T Travel Acceleration / #define DEFAULT_ACCELERATION", "//#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // coarse Endstop Settings //#define ENDSTOPPULLUPS", "/* * The BLTouch probe uses a Hall effect sensor", "factors are given than the * total number of extruders,", "do \"Auto\" Bed Leveling without a probe. * Use G29", "Settings //#define ENDSTOPPULLUPS // Comment this out (using // at", "// Turn fans off when probing // A probe that", "// @section machine // Invert the stepper direction. Change (or", "/** * Default Acceleration (change/s) change = mm/s * Override", "of the build of a i3 MK2 clone and have", "MAX_POS in response to movement commands. //#define MAX_SOFTWARE_ENDSTOPS /** ", "to invert the logic of the probe. // Enable this", "Z Clearance between probe points // For M851 give a", "or other probe types. / //#define PROBING_HEATERS_OFF // Turn heaters", "true // Keep only the active extruder enabled. // @section", "go up. Any advice? I've definitely done a few searches", "I'm near the end of the build of a i3", "false #define INVERT_Z_DIR false // Enable this option for Toshiba", "boards you may need to define FIL_RUNOUT_PIN. * By default", "#define INVERT_Z_DIR false // Enable this option for Toshiba stepper", "(+) \| G <-- nozzle (10,10) * T \| \|", "be reset by M502 * * Note that if EEPROM", "\| \| * L \| (+) P \| R <--", "interrupt-capable. // This will remove the need to poll the", "with M201 * X, Y, Z, E0 [, E1[, E2[,", "true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING", "by M502 * * Note that if EEPROM is enabled,", "to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true", "INVERT_Z_DIR false // Enable this option for Toshiba stepper drivers", "assumes HIGH = has filament, LOW = ran out /", "'noise' (the change in current flowing through the wires).", "XY_PROBE_SPEED 8000 // Speed for the first approach when double-probing", "extruder #define DISABLE_E false // For all extruders #define DISABLE_INACTIVE_EXTRUDER", "the source of the 'noise' (the change * in current", "* L \| (+) P \| R <-- probe (20,20)", "of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // Use", "check for the presence of filament. * * RAMPS-based boards", "// (in mm) Minimal z height before homing (G28) for", "X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12", "Leave undefined any used for non-endstop and non-probe purposes. #define", "a free endstop connector. * - Use 5V for powered", "nozzle. * But: `M851 Z+1` with a CLEARANCE of 2", "//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed", "10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 //", "Default Max Acceleration (change/s) change = mm/s * (Maximum start", "GND, and Aux4->D32 pin: * - For simple switches connect...", "Inductive probes need space to keep from triggering early. ", "near the end of the build of a i3 MK2", "the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20", "the distance (mm) to raise the probe (or lower", "also only go up. Any advice? I've definitely done a", "//#define Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting Stepper Enable Pins (Active Low)", "ran out / //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false", "over and above any (negative) probe Z Offset set", "an inductive probe or a nozzle-based probe-switch.) / #define FIX_MOUNTED_PROBE", "to SERVO 0 connector. //#define Z_SERVO_ANGLES {70,0} // Z Servo", "Speed for the \"accurate\" probe of each point #define Z_PROBE_SPEED_SLOW", "must be integers. * In the following example the", "Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability", "Options ============================= //=========================================================================== // @section probes // // See http://marlinfw.org/configuration/probes.html", "homing // Specify here all the endstop connectors that are", "stepper can have its own factors for the * following", "connected to the Z Min endstop pin. / #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN", "\| H \| (-) \| T * \| \|", "an endstop switch on a rotating arm. / //#define Z_ENDSTOP_SERVO_NR", "your Z_MAX_POS in case. // Direction of endstops when homing;", "relative to (0, 0). X and Y offsets must", "1 // :{ 0:'Low', 1:'High' } #define X_ENABLE_ON 0 #define", "Z-Max endstop pin.) * To use a custom Z Probe", "Warn on display about possibly reduced accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING //", "Use G29 repeatedly, adjusting the Z height at each point", "set here apply over and above any (negative) * probe", "* Inductive probes need space to keep from triggering early.", "Default Axis Steps Per Unit (steps/mm) * Override with M92", "and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 //", "solved the problem. `Config.h` is as follows (clipped due to", "switches to GND and D32. * - normally-open switches to", "* Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * * Enable this option for a probe", "active extruder enabled. // @section machine // Invert the stepper", "adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX", "flowing through the wires). This is likely most useful to", "Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION", "Endstop Settings =========================== //=========================================================================== // @section homing // Specify here", "types. / //#define PROBING_HEATERS_OFF // Turn heaters off when probing", "options selected below - will be disabled during probing so", " The BLTouch probe uses a Hall effect sensor and", "endstop switch on a rotating arm. / //#define Z_ENDSTOP_SERVO_NR 0", "nozzle-based probe-switch.) / #define FIX_MOUNTED_PROBE /** * Z Servo Probe,", "from bed to nozzle. * But: `M851 Z+1` with a", "#define INVERT_E4_DIR false // @section homing //#define Z_HOMING_HEIGHT 4 //", "DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non", "to rotate. * Inductive probes need space to keep from", "false // Enable this option for Toshiba stepper drivers //#define", "* A mechanical or opto endstop is used to check", "// Enable the M48 repeatability test to test probe accuracy", "axis must travel to pickup the sled. 0 should be", "Toshiba stepper drivers //#define CONFIG_STEPPERS_TOSHIBA // @section extruder // For", "LCD_BED_LEVELING) the LCD controller. / //#define PROBE_MANUALLY /* * A", "200 #define Z_MAX_POS 200 // If enabled, axes won't move", "offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12 //", "Z_HOME_DIR -1 // @section machine // Travel limits after homing", "2.0 //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== // @section", "to disable the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine", "the printer up. Using Marlin 1.1.3 with a RAMPS 1.4.", "#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the", "probe, but may also help those with inductive or other", "on a rotating arm. / //#define Z_ENDSTOP_SERVO_NR 0 // Defaults", "the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to", "sensors. * - RAMPS 1.3/1.4 boards may use the", "one per axis. Probes will use one or more of", "} /** * Default Max Acceleration (change/s) change = mm/s", "configurations. // /** * Z Probe to nozzle (X,Y) offset,", "* T \| \| H * \| (-) \| T", "rotate. * Inductive probes need space to keep from triggering", "//#define PROBING_HEATERS_OFF // Turn heaters off when probing //#define PROBING_FANS_OFF", "Default Acceleration (change/s) change = mm/s * Override with M204", "for travel (non printing) moves /** * Default Jerk (mm/s)", "(with LCD_BED_LEVELING) the LCD controller. / //#define PROBE_MANUALLY /* ", "those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5", "/* * Z probes require clearance when deploying, stowing, and", "false #define INVERT_E3_DIR false #define INVERT_E4_DIR false // @section homing", "settings. If fewer factors are given than the * total", "\| T * \| \| * O-- FRONT --+ ", "direct drive extruder v9 set to true, for geared extruder", "avoid hitting the bed and other hardware. Servo-mounted probes", "E4]]]] / #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }", "\| O-- FRONT --+ * (0,0) / #define X_PROBE_OFFSET_FROM_EXTRUDER", "Setting the wrong pin may have unexpected and potentially ", "SOLENOID_PROBE // A sled-mounted probe like those designed by Charles", "the * options selected below - will be disabled during", "used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG", "lower the bed). The values set here apply over and", "/ //#define PROBE_MANUALLY /* * A Fix-Mounted Probe either doesn't", "#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // Use double touch for", "or (with LCD_BED_LEVELING) the LCD controller. / //#define PROBE_MANUALLY /", "the need to poll the interrupt pins, saving many CPU", "move below MIN_POS in response to movement commands. //#define MIN_SOFTWARE_ENDSTOPS", "(Z_PROBE_SPEED_FAST / 2) // Use double touch for probing //#define", "printer up. Using Marlin 1.1.3 with a RAMPS 1.4. Both", "of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true", "E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_ACCELERATION { 3000, 3000,", "//=========================================================================== //============================== Endstop Settings =========================== //=========================================================================== // @section homing //", "the wires). This is likely most useful to users of", "reversed the z-axis motor wires and they only go up.", "minimum speed change that requires acceleration. * When changing speed", "to minimize * potential EM interference by quieting/silencing the source", "bed, clamps, ... // Be sure you have this distance", "like. // // For Z_PROBE_ALLEN_KEY see the Delta example configurations.", "5V, GND, and Aux4->D32 pin: * - For simple switches", "use Auto Bed Leveling below. / /* * The \"Manual", "deploy or needs manual deployment. * (e.g., an inductive probe", "* Default Max Feed Rate (mm/s) * Override with M203", "from bed to nozzle. / #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z", "Using Marlin 1.1.3 with a RAMPS 1.4. Both motors turn", "Per Unit (steps/mm) Override with M92 * X, Y,", "0 // Defaults to SERVO 0 connector. //#define Z_SERVO_ANGLES {70,0}", "is a chance of losing position accuracy! #define DISABLE_X false", "using one per axis. Probes will use one or more", "WARNING: Setting the wrong pin may have unexpected and potentially", "(-) \| T * \| \| * O-- FRONT --+", "Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** * Z", "connect... * - normally-closed switches to GND and D32. ", "endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert", "0, Non Inverting (Active High) use 1 // :{ 0:'Low',", "// A probe that is deployed and stowed with a", "the logic of the probe. // Enable this feature if", "{ 200, 200, 3, 25 } /* * Default Max", "carriage. Additional test: reversed the z-axis motor wires and they", "useful to users of the * BLTouch probe, but may", "G <-- nozzle (10,10) * T \| \| H ", "probe types. / //#define PROBING_HEATERS_OFF // Turn heaters off when", "need to poll the interrupt pins, saving many CPU cycles.", "probing // A probe that is deployed and stowed with", "... // Be sure you have this distance over your", "\"Jerk\" specifies the minimum speed change that requires acceleration. ", "machine // Travel limits after homing (units are in mm)", "= has filament, LOW = ran out / //#define FILAMENT_RUNOUT_SENSOR", "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /** * Z_MIN_PROBE_ENDSTOP * * Enable this option for", "connected to any endstop or probe. // Almost all printers", "integers. * * In the following example the X and", "E3[, E4]]]] / #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000", "mm/s Override with M204 * * M204 P Acceleration", "per axis. Probes will use one or more of the", "and direction, if the difference is less than the ", "to true to invert the logic of the probe. //", "is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN", "Additional test: reversed the z-axis motor wires and they only", "Steps Per Unit (steps/mm) Override with M92 * X,", "Default Max Feed Rate (mm/s) * Override with M203 ", "Z Servo Deploy and Stow angles /* * The BLTouch", "true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING", "0.4 #define DEFAULT_EJERK 2.0 //=========================================================================== //============================= Z Probe Options =============================", "interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //==============================", "less than the * value set here, it may happen", "Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5", "the wrong pin may have unexpected and potentially * disastrous", "E1[, E2[, E3[, E4]]]] / #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100,", "4 => 9mm from bed to nozzle. But: `M851", "#define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define", "/ #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 4000, 120 } /", "axis stepper immediately when it's not being used. // WARNING:", "Z_PROBE_ALLEN_KEY see the Delta example configurations. // /* * Z", "the difference is less than the * value set here,", "* Z_MIN_PROBE_ENDSTOP * * Enable this option for a probe", "0 #define E_ENABLE_ON 0 // For all extruders // Disables", "M92 * X, Y, Z, E0 [, E1[, E2[, E3[,", "X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS", "0:'Low', 1:'High' } #define X_ENABLE_ON 0 #define Y_ENABLE_ON 0 #define", "off when probing //#define PROBING_FANS_OFF // Turn fans off when", "10.0 #define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 2.0", "you may need to define FIL_RUNOUT_PIN. * By default the", "all endstops open. Min software stops are currently disabled, as", "HOMING_FEEDRATE_Z // Speed for the \"accurate\" probe of each point", "is as follows (clipped due to posting restrictions): ``` //===========================================================================", "(By default Marlin assumes the Z-Max endstop pin.) * To", "(or reverse the motor connector) if an axis goes the", "factors for the * following movement settings. If fewer factors", "extra distance the X axis must travel to pickup the", "Z Probe to nozzle (X,Y) offset, relative to (0, 0).", "homing //#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height", "of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true", "HIGH = has filament, LOW = ran out / //#define", "goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR false", "// coarse Endstop Settings //#define ENDSTOPPULLUPS // Comment this out", "change = mm/s (Maximum start speed for accelerated moves)", "E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E", "endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual", "are both positive: * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER", "the \"accurate\" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST /", "the Delta example configurations. // /** * Z Probe to", "230 #define Y_MAX_POS 200 #define Z_MAX_POS 200 // If enabled,", "after homing (units are in mm) #define X_MIN_POS 0 #define", "pin.) * To use a custom Z Probe pin, set", "will remove the need to poll the interrupt pins, saving", "won't move above MAX_POS in response to movement commands. //#define", "M204 * * M204 P Acceleration * M204 R Retract", "of extruders, the last value applies to the rest. /", "2mm from bed to nozzle. / #define Z_CLEARANCE_DEPLOY_PROBE 10 //", "P Acceleration * M204 R Retract Acceleration * M204 T", "probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD.", "way. #define INVERT_X_DIR false #define INVERT_Y_DIR false #define INVERT_Z_DIR false", "* By default the firmware assumes HIGH = has filament,", "This is likely most useful to users of the ", "connected to any pin except Z-Min. (By default Marlin", "You must activate one of these to use Auto Bed", "} /** * Default Acceleration (change/s) change = mm/s ", "acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration", "\"false\" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set", "Z, E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_FEEDRATE", "heaters off when probing //#define PROBING_FANS_OFF // Turn fans off", "CONFIG_STEPPERS_TOSHIBA // @section extruder // For direct drive extruder v9", "Stow angles /** * The BLTouch probe uses a Hall", "the LCD controller. / //#define PROBE_MANUALLY /* * A Fix-Mounted", "like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET", "} #define X_ENABLE_ON 0 #define Y_ENABLE_ON 0 #define Z_ENABLE_ON 0", "of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true", "T * \| \| * O-- FRONT --+ * (0,0)", "drivers //#define CONFIG_STEPPERS_TOSHIBA // @section extruder // For direct drive", "10 * * +-- BACK ---+ * \| \| ", "commands. //#define MIN_SOFTWARE_ENDSTOPS // If enabled, axes won't move above", "endstop or probe. // Almost all printers will be using", "moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define", "// See http://marlinfw.org/configuration/probes.html // /* * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * * Enable", "for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration", "E4]]]] / #define DEFAULT_MAX_FEEDRATE { 200, 200, 3, 25 }", " options selected below - will be disabled during probing", "specifies the minimum speed change that requires acceleration. * When", "1:'High' } #define X_ENABLE_ON 0 #define Y_ENABLE_ON 0 #define Z_ENABLE_ON", "#define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define", "#define XY_PROBE_SPEED 8000 // Speed for the first approach when", "to any endstop or probe. // Almost all printers will", "the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set", "valid here. * * Example: `M851 Z-5` with a CLEARANCE", "pin except Z-Min. * (By default Marlin assumes the Z-Max", "* * - The simplest option is to use a", "or opto endstop is used to check for the presence", "is likely most useful to users of the * BLTouch", "applies to the rest. / //#define DISTINCT_E_FACTORS /* * Default", "200, 200, 3, 25 } /** * Default Max Acceleration", "display about possibly reduced accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING // @section extruder", "when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 #define", "//#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE", "// extra connectors. Leave undefined any used for non-endstop and", "bed and other hardware. * Servo-mounted probes require extra space", "internal pullup for filament runout pins if the sensor is", "=> 9mm from bed to nozzle. * But: `M851 Z+1`", "the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set", "and Y offsets are both positive: * #define X_PROBE_OFFSET_FROM_EXTRUDER 10", "M851, or the LCD. * Only integer values >= 1", "DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 4000, 120 } /** * Default", "many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //============================== Movement Settings ============================", "may have unexpected and potentially * disastrous consequences. Use with", "* Default Settings * * These settings can be reset", "if the difference is less than the * value set", "0 #define Z_ENABLE_ON 0 #define E_ENABLE_ON 0 // For all", "values >= 1 are valid here. * * Example: `M851", "* * Use these settings to specify the distance (mm)", "Disables axis stepper immediately when it's not being used. //", "(+) P \| R <-- probe (20,20) * E \|", "remove the need to poll the interrupt pins, saving many", "during probing so as to minimize * potential EM interference", "// The extra distance the X axis must travel to", "#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } /** ", "offset, relative to (0, 0). X and Y offsets", "false // Warn on display about possibly reduced accuracy //#define", "for powered (usually inductive) sensors. * * - RAMPS 1.3/1.4", "and D32. * - normally-open switches to 5V and D32.", "shows all endstops open. Min software stops are currently disabled,", "and/or fans - consistent with the * options selected below", "If enabled, axes won't move above MAX_POS in response to", "Z_MAX_POS in case. // Direction of endstops when homing; 1=MAX,", "// This will remove the need to poll the interrupt", "* Enable this option for a probe connected to any", "For other boards you may need to define FIL_RUNOUT_PIN. ", "they also only go up. Any advice? I've definitely done", "Max Feed Rate (mm/s) Override with M203 * X,", "X and Y axis travel speed (mm/m) between probes #define", "Clearance between probe points // For M851 give a range", "(and trigger the endstop) but it will only make a", "* in current flowing through the wires). This is likely", "provides a means to do \"Auto\" Bed Leveling without a", "-1 #define Y_HOME_DIR -1 #define Z_HOME_DIR -1 // @section machine", "potential EM interference by quieting/silencing the source of the 'noise'", "Settings ============================ //============================================================================= // @section motion /** * Default Settings", "ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with", "* - normally-closed switches to GND and D32. * -", "of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true", "Pins (Active Low) use 0, Non Inverting (Active High) use", "* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * * +-- BACK ---+ ", "#define Z_MAX_POS 200 // If enabled, axes won't move below", "Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. ", "Any advice? I've definitely done a few searches but haven't", "\| (-) \| T * \| \| * O-- FRONT", "T \| \| H * \| (-) \| T ", "/ //#define DISTINCT_E_FACTORS /** * Default Axis Steps Per Unit", "#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /** * Z_MIN_PROBE_ENDSTOP * * Enable this option", "change = mm/s * Override with M204 * * M204", "A mechanical or opto endstop is used to check for", "probe points to avoid hitting the bed and other hardware.", "fewer factors are given than the * total number of", "inductive) sensors. * * - RAMPS 1.3/1.4 boards may use", "endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to true to invert", "endstop pin.) * To use a custom Z Probe pin,", "// X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER", "for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define", "(mm/s) * Override with M205 X Y Z E ", "I F \| (-) N (+) \| G <--", "`M851 Z-5` with a CLEARANCE of 4 => 9mm from", "#define Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y offset: -front +behind [the nozzle]", "this feature if all enabled endstop pins are interrupt-capable. //", "extruder // For direct drive extruder v9 set to true,", "for Z clearance above the bed, clamps, ... // Be", "#define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.4 #define", "accelerated moves) * Override with M201 * X, Y, Z,", "//#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to", "9mm from bed to nozzle. * But: `M851 Z+1` with", "but haven't solved the problem. `Config.h` is as follows (clipped", "switches to 5V and D32. * * WARNING: Setting the", "up. `M119` shows all endstops open. Min software stops are", "are valid here. * * Example: `M851 Z-5` with a", "a problem with the Z-axis motors. Specifically, the Z-axis will", "Servo Deploy and Stow angles /** * The BLTouch probe", "connector. * - Use 5V for powered (usually inductive) sensors.", "Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS 230 #define Y_MAX_POS", "//#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy", "of the // extra connectors. Leave undefined any used for", "for a probe connected to the Z Min endstop pin.", "pin may have unexpected and potentially * disastrous consequences. Use", "pins if the sensor is defined. #define FILAMENT_RUNOUT_SCRIPT \"M600\" #endif", "double touch for probing //#define PROBE_DOUBLE_TOUCH /** * Z probes", "commands. //#define MAX_SOFTWARE_ENDSTOPS /** * Filament Runout Sensor * A", "Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. * You must", "0 // For all extruders // Disables axis stepper immediately", "(mm/m) between probes #define XY_PROBE_SPEED 8000 // Speed for the", "probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable", "with inductive or other probe types. / //#define PROBING_HEATERS_OFF //", "any pin except Z-Min. (By default Marlin assumes the", "Jerk (mm/s) * Override with M205 X Y Z E", "N (+) \| G <-- nozzle (10,10) * T \|", "logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to", "the probe. // Enable this feature if all enabled endstop", "RAMPS-based boards use SERVO3_PIN. * For other boards you may", "Be sure you have this distance over your Z_MAX_POS in", "E_ENABLE_ON 0 // For all extruders // Disables axis stepper", "of the probe. // Enable this feature if all enabled", "DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for", "3000 // X, Y, Z and E acceleration for printing", "Z Probe Options ============================= //=========================================================================== // @section probes // //", "be integers. * * In the following example the X", "opto endstop is used to check for the presence of", "for filament runout pins if the sensor is defined. #define", "pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //============================== Movement", "response to movement commands. //#define MAX_SOFTWARE_ENDSTOPS /** * Filament Runout", "[of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y offset: -front", "// Keep only the active extruder enabled. // @section machine", "High) use 1 // :{ 0:'Low', 1:'High' } #define X_ENABLE_ON", "use a free endstop connector. * - Use 5V for", "of the * BLTouch probe, but may also help those", "only the active extruder enabled. // @section machine // Invert", "fans off when probing // A probe that is deployed", "for Toshiba stepper drivers //#define CONFIG_STEPPERS_TOSHIBA // @section extruder //", "than the * total number of extruders, the last value", "the arm to rotate. * Inductive probes need space to", "unexpected and potentially * disastrous consequences. Use with caution and", "For Inverting Stepper Enable Pins (Active Low) use 0, Non", "with a CLEARANCE of 2 => 2mm from bed to", "movement commands. //#define MAX_SOFTWARE_ENDSTOPS /** * Filament Runout Sensor ", "probe that is deployed and stowed with a solenoid pin", "and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED", "The simplest option is to use a free endstop connector.", "change in current flowing through the wires). This is", "test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting", "* In the following example the X and Y offsets", "LCD controller. / //#define PROBE_MANUALLY /* * A Fix-Mounted Probe", "Z+1` with a CLEARANCE of 2 => 2mm from bed", "* - The simplest option is to use a free", "Turn fans off when probing // A probe that is", "Z acceleration for travel (non printing) moves /** * Default", "PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Speed for the \"accurate\" probe", "and have run into a problem with the Z-axis motors.", "* But: `M851 Z+1` with a CLEARANCE of 2 =>", "// // See http://marlinfw.org/configuration/probes.html // /** * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * ", "possibly reduced accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING // @section extruder #define DISABLE_E", "homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR", "Min software stops are currently disabled, as I try to", "// For all extruders // Disables axis stepper immediately when", "mm) Minimal z height before homing (G28) for Z clearance", "100, 4000, 120 } /* * Default Max Feed Rate", "- RAMPS 1.3/1.4 boards may use the 5V, GND, and", "is deployed and stowed with a solenoid pin (SOL1_PIN) //#define", "For Z_PROBE_ALLEN_KEY see the Delta example configurations. // /** ", "// set to true to invert the logic of the", "direction, if the difference is less than the value", "Probe Type * * Allen Key Probes, Servo Probes, Z-Sled", "#define FIX_MOUNTED_PROBE /** * Z Servo Probe, such as an", "(most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true", "* / //#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN Z_MAX_PIN /* * Probe", "// X, Y, Z acceleration for travel (non printing) moves", "triggering early. * * Use these settings to specify the", "hitting the bed and other hardware. * Servo-mounted probes require", "connector. //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow", "// :[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR -1 #define Z_HOME_DIR", "Default Jerk (mm/s) * Override with M205 X Y Z", "- For simple switches connect... * - normally-closed switches to", "* Only integer values >= 1 are valid here. ", "custom Z Probe pin, set Z_MIN_PROBE_PIN below. * -", "(G28) for Z clearance above the bed, clamps, ... //", "/** * With this option each E stepper can have", "// For Z_PROBE_ALLEN_KEY see the Delta example configurations. // /", "0 // Z offset: -below +above [the nozzle] // X", "// / * Z Probe to nozzle (X,Y) offset, relative", "logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to", "the logic of the sensor. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to", "#define DISABLE_Z false // Warn on display about possibly reduced", "from triggering early. * * Use these settings to specify", "the sled. 0 should be fine but you can push", "{ 3000, 3000, 100, 10000 } /** * Default Acceleration", "* You must activate one of these to use Auto", "RAMPS 1.4. Both motors turn and I've even uncoupled the", "* Override with M203 * X, Y, Z, E0 [,", "2) // Use double touch for probing //#define PROBE_DOUBLE_TOUCH /*", "Almost all printers will be using one per axis. Probes", "Invert the stepper direction. Change (or reverse the motor connector)", "the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR false #define", "caution and do your homework. / //#define Z_MIN_PROBE_ENDSTOP //#define", "Probes, FIX_MOUNTED_PROBE, etc. You must activate one of these", "effect sensor and emulates a servo. / //#define BLTOUCH #if", " * In the following example the X and Y", "USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG //", "// Enable this feature if all enabled endstop pins are", "* * These settings can be reset by M502 ", "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * Enable this option for a probe connected", "E \| \| I * F \| (-) N (+)", "have unexpected and potentially * disastrous consequences. Use with caution", "#define Y_MAX_POS 200 #define Z_MAX_POS 200 // If enabled, axes", "probes require extra space for the arm to rotate. ", "1.4. Both motors turn and I've even uncoupled the entire", "hardware. Servo-mounted probes require extra space for the arm", "above the bed, clamps, ... // Be sure you have", "the * following movement settings. If fewer factors are given", "pin. / #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /* * Z_MIN_PROBE_ENDSTOP * * Enable", "4000, 120 } /** * Default Max Feed Rate (mm/s)", "first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z //", "/ //#define BLTOUCH #if ENABLED(BLTOUCH) //#define BLTOUCH_DELAY 375 // (ms)", "// For all extruders #define DISABLE_INACTIVE_EXTRUDER true // Keep only", "will move down (and trigger the endstop) but it will", "points // For M851 give a range for adjusting the", "probe. // Almost all printers will be using one per", "<-- nozzle (10,10) T \| \| H * \|", "\| (-) N (+) \| G <-- nozzle (10,10) ", "When changing speed and direction, if the difference is less", "offsets are both positive: #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define", "a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * ", "#if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to", "it may happen instantaneously. / #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK", "all enabled endstop pins are interrupt-capable. // This will remove", "* Use these settings to specify the distance (mm) to", "such as an endstop switch on a rotating arm. /", "// Enable this option for Toshiba stepper drivers //#define CONFIG_STEPPERS_TOSHIBA", "#define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 2.0 //=========================================================================== //============================= Z Probe", "//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis", "to raise the probe (or lower the bed). The", "For simple switches connect... * - normally-closed switches to GND", ">= 1 are valid here. * * Example: `M851 Z-5`", "touch for probing //#define PROBE_DOUBLE_TOUCH /** * Z probes require", "// // For Z_PROBE_ALLEN_KEY see the Delta example configurations. //", "over your Z_MAX_POS in case. // Direction of endstops when", "Z Probe pin, set Z_MIN_PROBE_PIN below. * * - The", "(in mm) Minimal z height before homing (G28) for Z", "and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE //", "the probe (or * lower the bed). The values set", "* disastrous consequences. Use with caution and do your homework.", "end of the build of a i3 MK2 clone and", "[, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_ACCELERATION { 3000,", "#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * +-- BACK ---+ * \|", "Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points", "Settings =========================== //=========================================================================== // @section homing // Specify here all", "ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with COM to", "are interrupt-capable. // This will remove the need to poll", "the 'noise' (the change * in current flowing through the", "#define X_MAX_POS 230 #define Y_MAX_POS 200 #define Z_MAX_POS 200 //", "* With this option each E stepper can have its", "stepper drivers //#define CONFIG_STEPPERS_TOSHIBA // @section extruder // For direct", "// If enabled, axes won't move below MIN_POS in response", "DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK", "stops are currently disabled, as I try to set the", "either doesn't deploy or needs manual deployment. * (e.g., an", "* (e.g., an inductive probe or a nozzle-based probe-switch.) /", "Fix-Mounted Probe either doesn't deploy or needs manual deployment. ", "the Z-axis will move down (and trigger the endstop) but", "CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //============================== Movement Settings ============================ //=============================================================================", "Servo Probe, such as an endstop switch on a rotating", "* \| \| * O-- FRONT --+ * (0,0) /", "#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES", "// @section motion /* * Default Settings * * These", "non-endstop and non-probe purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG", "#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG", "each E stepper can have its own factors for the", "Non Inverting (Active High) use 1 // :{ 0:'Low', 1:'High'", "is less than the * value set here, it may", "ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with COM to ground and", "200, 3, 25 } /** * Default Max Acceleration (change/s)", "For all extruders #define DISABLE_INACTIVE_EXTRUDER true // Keep only the", "integer values >= 1 are valid here. * * Example:", "is to use a free endstop connector. * - Use", "with M204 * * M204 P Acceleration * M204 R", "// If enabled, axes won't move above MAX_POS in response", "\| * L \| (+) P \| R <-- probe", "#define Z_HOME_DIR -1 // @section machine // Travel limits after", "Rate (mm/s) * Override with M203 * X, Y, Z,", "chance of losing position accuracy! #define DISABLE_X false #define DISABLE_Y", "ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define", "for probing //#define PROBE_DOUBLE_TOUCH /** * Z probes require clearance", "true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING", "USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // coarse Endstop", "space to keep from triggering early. * * Use these", "Enable this option for a probe connected to any pin", "Probe Options ============================= //=========================================================================== // @section probes // // See", "positive: * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 ", " * - RAMPS 1.3/1.4 boards may use the 5V,", "Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. * Only", "/** * Z Probe to nozzle (X,Y) offset, relative to", "default Marlin assumes the Z-Max endstop pin.) * To use", "may need to define FIL_RUNOUT_PIN. * By default the firmware", "open. Min software stops are currently disabled, as I try", "this out (using // at the start of the line)", "// X and Y axis travel speed (mm/m) between probes", "/** * Default Max Acceleration (change/s) change = mm/s ", "D32. - normally-open switches to 5V and D32. ", "response to movement commands. //#define MIN_SOFTWARE_ENDSTOPS // If enabled, axes", "try to move it up. `M119` shows all endstops open.", "uses \"false\" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true //", "-1 // @section machine // Travel limits after homing (units", "the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to true to", "Enable the M48 repeatability test to test probe accuracy //#define", "endstop with COM to ground and NC to Signal uses", "do your homework. / //#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN Z_MAX_PIN", "endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert", " Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.", "BLTOUCH_DELAY 375 // (ms) Enable and increase if needed #endif", "of filament. * * RAMPS-based boards use SERVO3_PIN. * For", "* probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the", "* total number of extruders, the last value applies to", "further if you'd like. // // For Z_PROBE_ALLEN_KEY see the", "for the * following movement settings. If fewer factors are", "Sensor * A mechanical or opto endstop is used to", "for the \"accurate\" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST", "the bed and other hardware. * Servo-mounted probes require extra", "up. Any advice? I've definitely done a few searches but", "selected below - will be disabled during probing so as", "//#define PROBE_DOUBLE_TOUCH /** * Z probes require clearance when deploying,", "Delta example configurations. // /** * Z Probe to nozzle", "the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set", "must activate one of these to use Auto Bed Leveling", "#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION", "//============================= Z Probe Options ============================= //=========================================================================== // @section probes //", "\"Manual Probe\" provides a means to do \"Auto\" Bed Leveling", "COM to ground and NC to Signal uses \"false\" here", "up. Using Marlin 1.1.3 with a RAMPS 1.4. Both motors", "here all the endstop connectors that are connected to any", "total number of extruders, the last value applies to the", "uncoupled the entire X-axis carriage. Additional test: reversed the z-axis", "Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles /*", "Enable this feature if all enabled endstop pins are interrupt-capable.", "\| R <-- probe (20,20) E \| \| I", "as to minimize * potential EM interference by quieting/silencing the", "the Z Min endstop pin. / #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /* ", " M204 T Travel Acceleration / #define DEFAULT_ACCELERATION 3000 //", "//#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector. //#define", "For all extruders // Disables axis stepper immediately when it's", "Z, E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_ACCELERATION", "DISABLE_Y false #define DISABLE_Z false // Warn on display about", "deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE", "= mm/s * (Maximum start speed for accelerated moves) ", "O-- FRONT --+ (0,0) / #define X_PROBE_OFFSET_FROM_EXTRUDER 22 //", "controller. / //#define PROBE_MANUALLY /** * A Fix-Mounted Probe either", "definitely done a few searches but haven't solved the problem.", "#define INVERT_E3_DIR false #define INVERT_E4_DIR false // @section homing //#define", "Z offset: -below +above [the nozzle] // X and Y", "Uncomment to use internal pullup for filament runout pins if", "endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert", "use the 5V, GND, and Aux4->D32 pin: * - For", "set here, it may happen instantaneously. / #define DEFAULT_XJERK 10.0", "have run into a problem with the Z-axis motors. Specifically,", "most useful to users of the BLTouch probe, but", "L \| (+) P \| R <-- probe (20,20) ", "0 #define Z_MIN_POS 0 #define X_MAX_POS 230 #define Y_MAX_POS 200", "the stepper direction. Change (or reverse the motor connector) if", "#define Z_ENABLE_ON 0 #define E_ENABLE_ON 0 // For all extruders", "extruder v9 set to true, for geared extruder set to", "push it further if you'd like. // // For Z_PROBE_ALLEN_KEY", "+-- BACK ---+ \| \| * L \| (+)", "#define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 2.0 //===========================================================================", "Endstop Settings //#define ENDSTOPPULLUPS // Comment this out (using //", "FIL_RUNOUT_INVERTING false // set to true to invert the logic", "with movement commands * or (with LCD_BED_LEVELING) the LCD controller.", "at each point with movement commands * or (with LCD_BED_LEVELING)", "with a CLEARANCE of 4 => 9mm from bed to", "run into a problem with the Z-axis motors. Specifically, the", "speed for accelerated moves) * Override with M201 * X,", "endstop) but it will only make a quick noise if", "the bed, clamps, ... // Be sure you have this", "about possibly reduced accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING // @section extruder #define", "pullup for filament runout pins if the sensor is defined.", "even uncoupled the entire X-axis carriage. Additional test: reversed the", "to true to invert the logic of the endstop. #define", "and Y offsets must be integers. * * In the", "// fine endstop settings: Individual pullups. will be ignored if", "X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * * +-- BACK", "Override with M201 * X, Y, Z, E0 [, E1[,", "* * RAMPS-based boards use SERVO3_PIN. * For other boards", "have its own factors for the * following movement settings." ]
[ "to upgrade it later with, say, an air filter etc.,", "would do it mainly for noise cancelling, because I have", "ventilation slits? * Would you put the filament inside or", "an enclosure for it. Since I'm currently only printing PLA,", "in my room. I however want to have the possibility", "room. I however want to have the possibility to upgrade", "enclosure for it. Since I'm currently only printing PLA, I", "it mainly for noise cancelling, because I have to run", "etc., for example for ABS. * What do I have", "slits? * Would you put the filament inside or run", "want to have the possibility to upgrade it later with,", "attention to? * Do I need ventilation slits? * Would", "you put the filament inside or run it through a", "Since I'm currently only printing PLA, I would do it", "run it through a small hole from the top? ", "however want to have the possibility to upgrade it later", "to have the possibility to upgrade it later with, say,", "build an enclosure for it. Since I'm currently only printing", "want to build an enclosure for it. Since I'm currently", "the possibility to upgrade it later with, say, an air", "inside or run it through a small hole from the", "it later with, say, an air filter etc., for example", "for noise cancelling, because I have to run it in", "my room. I however want to have the possibility to", " Would you put the filament inside or run it", "from the top? * Any tips for making it especially", "I have to pay attention to? * Do I need", "for example for ABS. * What do I have to", "I'm currently only printing PLA, I would do it mainly", "for ABS. * What do I have to pay attention", "cancelling, because I have to run it in my room.", "because I have to run it in my room. I", "do it mainly for noise cancelling, because I have to", "hole from the top? * Any tips for making it", "it in my room. I however want to have the", "only printing PLA, I would do it mainly for noise", "small hole from the top? * Any tips for making", "I however want to have the possibility to upgrade it", "ABS. * What do I have to pay attention to?", "through a small hole from the top? * Any tips", "say, an air filter etc., for example for ABS. ", "have the possibility to upgrade it later with, say, an", "Anet A8 and want to build an enclosure for it.", "an air filter etc., for example for ABS. What", "* What do I have to pay attention to? ", "I have to run it in my room. I however", "making it especially noise cancelling? Is wood the right", "Do I need ventilation slits? * Would you put the", "A8 and want to build an enclosure for it. Since", "PLA, I would do it mainly for noise cancelling, because", "filter etc., for example for ABS. * What do I", "it especially noise cancelling? * Is wood the right material?", "an Anet A8 and want to build an enclosure for", "noise cancelling, because I have to run it in my", "to? * Do I need ventilation slits? * Would you", "tips for making it especially noise cancelling? * Is wood", "I would do it mainly for noise cancelling, because I", "put the filament inside or run it through a small", "possibility to upgrade it later with, say, an air filter", "I got an Anet A8 and want to build an", "run it in my room. I however want to have", "pay attention to? * Do I need ventilation slits? ", "with, say, an air filter etc., for example for ABS.", "What do I have to pay attention to? Do", "example for ABS. * What do I have to pay", "air filter etc., for example for ABS. * What do", "it through a small hole from the top? * Any", "to pay attention to? * Do I need ventilation slits?", "Would you put the filament inside or run it through", "for making it especially noise cancelling? * Is wood the", "do I have to pay attention to? * Do I", "it. Since I'm currently only printing PLA, I would do", "later with, say, an air filter etc., for example for", "got an Anet A8 and want to build an enclosure", "mainly for noise cancelling, because I have to run it", "a small hole from the top? * Any tips for", "and want to build an enclosure for it. Since I'm", "to build an enclosure for it. Since I'm currently only", "top? * Any tips for making it especially noise cancelling?", "the top? * Any tips for making it especially noise", "upgrade it later with, say, an air filter etc., for", "have to run it in my room. I however want", "printing PLA, I would do it mainly for noise cancelling,", "for it. Since I'm currently only printing PLA, I would", "* Do I need ventilation slits? * Would you put", "currently only printing PLA, I would do it mainly for", "to run it in my room. I however want to", "or run it through a small hole from the top?", "the filament inside or run it through a small hole", "Any tips for making it especially noise cancelling? * Is", "have to pay attention to? * Do I need ventilation", "* Any tips for making it especially noise cancelling? ", "filament inside or run it through a small hole from", "need ventilation slits? Would you put the filament inside", "I need ventilation slits? * Would you put the filament" ]
[ "Tronxy X3 (i3 Clone) running Repetier firmware on a Melzi", "computer upstairs 3. I can monitor the print progress remotely", "monitor, or still print if my sons forgot to disconnect", "and Software are you using * What do you like", "have separate Windows 10 PCs) 2. I can initiate a", "still print if my sons forgot to disconnect * What", "if so, how long * What Hardware and Software are", "* What do you find most annoying * What do", "to disconnect * What sort of monitoring is supported? Ex:", "What do you like most * What do you find", "What sort of monitoring is supported? Ex: camera? * What", "services are provided (printing, slicing, monitoring, etc.) * Can two", "sons forgot to disconnect * What sort of monitoring is", "the print progress remotely I have (and could use) ", "use the printer. (We have separate Windows 10 PCs) 2.", "(We have separate Windows 10 PCs) 2. I can initiate", "do you find most annoying What do you want", "What services are provided (printing, slicing, monitoring, etc.) * Can", "Marlin. * A Raspberrry Pi 1B * An idle laptop", "* What services are provided (printing, slicing, monitoring, etc.) ", "I have a Tronxy X3 (i3 Clone) running Repetier firmware", "Ex: To monitor, or still print if my sons forgot", "printer on a network, and if so, how long ", "idle laptop I (might) be willing to use What I", "initiate a print from my computer upstairs 3. I can", "two computers access it at the same time Ex: To", "print driver, etc.) * What services are provided (printing, slicing,", "monitoring, etc.) * Can two computers access it at the", "print if my sons forgot to disconnect * What sort", "print from my computer upstairs 3. I can monitor the", "What I want to know: * Are you sharing your", "* What do you like most * What do you", "PCs) 2. I can initiate a print from my computer", "have a Tronxy X3 (i3 Clone) running Repetier firmware on", "network, and if so, how long * What Hardware and", "to use What I want to know: * Are you", "Repetier firmware on a Melzi board. I would like to", "you find most annoying * What do you want to", "Both my boys and I can use the printer. (We", "network so that: 1. Both my boys and I can", "you sharing your printer on a network, and if so,", "my boys and I can use the printer. (We have", "(i3 Clone) running Repetier firmware on a Melzi board. I", "a print from my computer upstairs 3. I can monitor", "annoying * What do you want to change * What", "if my sons forgot to disconnect * What sort of", "laptop I (might) be willing to use What I want", "how long * What Hardware and Software are you using", "I can monitor the print progress remotely I have (and", "RAMPS board set that I could use to run Marlin.", "are you using * What do you like most ", "you like most What do you find most annoying", "could use) * A RAMPS board set that I could", "use to run Marlin. * A Raspberrry Pi 1B ", "board set that I could use to run Marlin. ", "so that: 1. Both my boys and I can use", "10 PCs) 2. I can initiate a print from my", "at the same time Ex: To monitor, or still print", "to know: * Are you sharing your printer on a", "can monitor the print progress remotely I have (and could", "do you like most * What do you find most", "same time Ex: To monitor, or still print if my", "Can two computers access it at the same time Ex:", "printer over my home network so that: 1. Both my", "you want to change * What is the interface (web", "that I could use to run Marlin. * A Raspberrry", "my sons forgot to disconnect * What sort of monitoring", "Melzi board. I would like to share the printer over", "Software are you using * What do you like most", "a network, and if so, how long * What Hardware", "your printer on a network, and if so, how long", "long * What Hardware and Software are you using ", "etc.) What services are provided (printing, slicing, monitoring, etc.)", "on a Melzi board. I would like to share the", "and if so, how long * What Hardware and Software", "most annoying * What do you want to change ", "is supported? Ex: camera? What runs the print job", "sharing your printer on a network, and if so, how", "* What Hardware and Software are you using * What", "I would like to share the printer over my home", "progress remotely I have (and could use) * A RAMPS", "An idle laptop I (might) be willing to use What", "firmware on a Melzi board. I would like to share", "Windows 10 PCs) 2. I can initiate a print from", "etc.) * Can two computers access it at the same", "slicing, monitoring, etc.) * Can two computers access it at", "are provided (printing, slicing, monitoring, etc.) * Can two computers", "you using * What do you like most * What", "is the interface (web interface, print driver, etc.) * What", "to share the printer over my home network so that:", "To monitor, or still print if my sons forgot to", "use What I want to know: * Are you sharing", "Raspberrry Pi 1B * An idle laptop I (might) be", "would like to share the printer over my home network", "board. I would like to share the printer over my", "do you want to change * What is the interface", "access it at the same time Ex: To monitor, or", "Pi 1B * An idle laptop I (might) be willing", "1. Both my boys and I can use the printer.", "What do you want to change * What is the", "use) * A RAMPS board set that I could use", "my home network so that: 1. Both my boys and", "time Ex: To monitor, or still print if my sons", "set that I could use to run Marlin. * A", "I (might) be willing to use What I want to", "Are you sharing your printer on a network, and if", "computers access it at the same time Ex: To monitor,", "willing to use What I want to know: * Are", "* A RAMPS board set that I could use to", "so, how long * What Hardware and Software are you", "forgot to disconnect * What sort of monitoring is supported?", "(web interface, print driver, etc.) * What services are provided", "disconnect * What sort of monitoring is supported? Ex: camera?", "provided (printing, slicing, monitoring, etc.) * Can two computers access", "(printing, slicing, monitoring, etc.) * Can two computers access it", "A RAMPS board set that I could use to run", "* What do you want to change * What is", "* Can two computers access it at the same time", "home network so that: 1. Both my boys and I", "(might) be willing to use What I want to know:", "to run Marlin. * A Raspberrry Pi 1B * An", "want to change * What is the interface (web interface,", "Clone) running Repetier firmware on a Melzi board. I would", "* An idle laptop I (might) be willing to use", "a Tronxy X3 (i3 Clone) running Repetier firmware on a", "my computer upstairs 3. I can monitor the print progress", "(and could use) * A RAMPS board set that I", "interface (web interface, print driver, etc.) * What services are", "remotely I have (and could use) * A RAMPS board", "run Marlin. * A Raspberrry Pi 1B * An idle", "print progress remotely I have (and could use) * A", "have (and could use) * A RAMPS board set that", "or still print if my sons forgot to disconnect ", "Hardware and Software are you using What do you", "I can initiate a print from my computer upstairs 3.", "* What is the interface (web interface, print driver, etc.)", "sort of monitoring is supported? Ex: camera? * What runs", "find most annoying * What do you want to change", "monitoring is supported? Ex: camera? * What runs the print", "* A Raspberrry Pi 1B * An idle laptop I", "change * What is the interface (web interface, print driver,", "using * What do you like most * What do", "supported? Ex: camera? * What runs the print job (G-code)", "* Are you sharing your printer on a network, and", "the printer over my home network so that: 1. Both", "over my home network so that: 1. Both my boys", "can initiate a print from my computer upstairs 3. I", "I have (and could use) * A RAMPS board set", "want to know: * Are you sharing your printer on", "What Hardware and Software are you using * What do", "separate Windows 10 PCs) 2. I can initiate a print", "I want to know: * Are you sharing your printer", "most * What do you find most annoying * What", "What do you find most annoying * What do you", "* What sort of monitoring is supported? Ex: camera? ", "A Raspberrry Pi 1B An idle laptop I (might)", "know: * Are you sharing your printer on a network,", "driver, etc.) * What services are provided (printing, slicing, monitoring,", "upstairs 3. I can monitor the print progress remotely I", "3. I can monitor the print progress remotely I have", "could use to run Marlin. * A Raspberrry Pi 1B", "the same time Ex: To monitor, or still print if", "like most * What do you find most annoying ", "I can use the printer. (We have separate Windows 10", "I could use to run Marlin. A Raspberrry Pi", "and I can use the printer. (We have separate Windows", "of monitoring is supported? Ex: camera? * What runs the", "1B * An idle laptop I (might) be willing to", "to change * What is the interface (web interface, print", "a Melzi board. I would like to share the printer", "interface, print driver, etc.) * What services are provided (printing,", "What is the interface (web interface, print driver, etc.) ", "like to share the printer over my home network so", "from my computer upstairs 3. I can monitor the print", "2. I can initiate a print from my computer upstairs", "it at the same time Ex: To monitor, or still", "that: 1. Both my boys and I can use the", "X3 (i3 Clone) running Repetier firmware on a Melzi board.", "can use the printer. (We have separate Windows 10 PCs)", "monitor the print progress remotely I have (and could use)", "running Repetier firmware on a Melzi board. I would like", "boys and I can use the printer. (We have separate", "on a network, and if so, how long What", "the interface (web interface, print driver, etc.) * What services", "share the printer over my home network so that: 1.", "be willing to use What I want to know: *", "printer. (We have separate Windows 10 PCs) 2. I can", "the printer. (We have separate Windows 10 PCs) 2. I" ]
[ "movement (typically Z, when I want better access to the", "changing filament after warming up, retract gave me some X", "and the extruder moves to the right. I have no", "the extruder), I observe that several channels move together (and", "no auto-leveling or anything else non-standard on this printer (dual", "command a single axis movement (typically Z, when I want", "happens is as well as the Z-axis moving up, the", "is as well as the Z-axis moving up, the bed", "Y, extruder, bed, extruder heat). It even happens if I", "controls. It doesn't happen often enough for me to have", "extrude some of the time (e.g. changing filament after warming", "right. I have no auto-leveling or anything else non-standard on", "any pattern - maybe it only happens if I've not", "have the result I'm expecting. What happens is as well", "I notice that if I manually command a single axis", "printer on, but I suspect not. It's not so much", "but I suspect not. It's not so much of a", "just a question for interest. Also not sure how to", "first after turning the printer on, but I suspect not.", "to the extruder), I observe that several channels move together", "an ANET-A8, I'm using mainly OctoPrint, but I think I've", "of the time (e.g. changing filament after warming up, retract", "up, retract gave me some X movement) Printer is an", "slower than I expect). After one 'coupled' movement, subsequent commands", "I expect). After one 'coupled' movement, subsequent commands have the", "forward, and the extruder moves to the right. I have", "movement) Printer is an ANET-A8, I'm using mainly OctoPrint, but", "enough for me to have identified any pattern - maybe", "to have identified any pattern - maybe it only happens", "some X movement) Printer is an ANET-A8, I'm using mainly", "observe that several channels move together (and they maybe move", "After one 'coupled' movement, subsequent commands have the result I'm", "PC software manual controls. It doesn't happen often enough for", "software manual controls. It doesn't happen often enough for me", "I observe that several channels move together (and they maybe", "It doesn't happen often enough for me to have identified", "- maybe it only happens if I've not homed first", "I have no auto-leveling or anything else non-standard on this", "heat). It even happens if I simply extrude some of", "moving up, the bed moves forward, and the extruder moves", "I want better access to the extruder), I observe that", "Z steppers, X, Y, extruder, bed, extruder heat). It even", "(e.g. changing filament after warming up, retract gave me some", "I simply extrude some of the time (e.g. changing filament", "often enough for me to have identified any pattern -", "the extruder moves to the right. I have no auto-leveling", "when I want better access to the extruder), I observe", "the time (e.g. changing filament after warming up, retract gave", "expecting. What happens is as well as the Z-axis moving", "have no auto-leveling or anything else non-standard on this printer", "bed, extruder heat). It even happens if I simply extrude", "time (e.g. changing filament after warming up, retract gave me", "turning the printer on, but I suspect not. It's not", "What happens is as well as the Z-axis moving up,", "expect). After one 'coupled' movement, subsequent commands have the result", "filament after warming up, retract gave me some X movement)", "warming up, retract gave me some X movement) Printer is", "Sometimes I notice that if I manually command a single", "if I manually command a single axis movement (typically Z,", "that several channels move together (and they maybe move slower", "I've not homed first after turning the printer on, but", "notice that if I manually command a single axis movement", "Z-axis moving up, the bed moves forward, and the extruder", "happens if I've not homed first after turning the printer", "if I've not homed first after turning the printer on,", "steppers, X, Y, extruder, bed, extruder heat). It even happens", "happen often enough for me to have identified any pattern", "identified any pattern - maybe it only happens if I've", "X movement) Printer is an ANET-A8, I'm using mainly OctoPrint,", "of a problem, as just a question for interest. Also", "me to have identified any pattern - maybe it only", "only happens if I've not homed first after turning the", "a single axis movement (typically Z, when I want better", "move together (and they maybe move slower than I expect).", "want better access to the extruder), I observe that several", "suspect not. It's not so much of a problem, as", "channels move together (and they maybe move slower than I", "moves to the right. I have no auto-leveling or anything", "non-standard on this printer (dual Z steppers, X, Y, extruder,", "manual controls. It doesn't happen often enough for me to", "ANET-A8, I'm using mainly OctoPrint, but I think I've also", "a question for interest. Also not sure how to tag.", "up, the bed moves forward, and the extruder moves to", "retract gave me some X movement) Printer is an ANET-A8,", "think I've also observed this with other PC software manual", "or anything else non-standard on this printer (dual Z steppers,", "axis movement (typically Z, when I want better access to", "the result I'm expecting. What happens is as well as", "not so much of a problem, as just a question", "as the Z-axis moving up, the bed moves forward, and", "on, but I suspect not. It's not so much of", "me some X movement) Printer is an ANET-A8, I'm using", "I'm using mainly OctoPrint, but I think I've also observed", "I've also observed this with other PC software manual controls.", "that if I manually command a single axis movement (typically", "it only happens if I've not homed first after turning", "this with other PC software manual controls. It doesn't happen", "'coupled' movement, subsequent commands have the result I'm expecting. What", "access to the extruder), I observe that several channels move", "maybe move slower than I expect). After one 'coupled' movement,", "as just a question for interest. Also not sure how", "It even happens if I simply extrude some of the", "gave me some X movement) Printer is an ANET-A8, I'm", "extruder moves to the right. I have no auto-leveling or", "printer (dual Z steppers, X, Y, extruder, bed, extruder heat).", "is an ANET-A8, I'm using mainly OctoPrint, but I think", "anything else non-standard on this printer (dual Z steppers, X,", "Z, when I want better access to the extruder), I", "OctoPrint, but I think I've also observed this with other", "using mainly OctoPrint, but I think I've also observed this", "Printer is an ANET-A8, I'm using mainly OctoPrint, but I", "happens if I simply extrude some of the time (e.g.", "(dual Z steppers, X, Y, extruder, bed, extruder heat). It", "if I simply extrude some of the time (e.g. changing", "simply extrude some of the time (e.g. changing filament after", "mainly OctoPrint, but I think I've also observed this with", "the right. I have no auto-leveling or anything else non-standard", "result I'm expecting. What happens is as well as the", "bed moves forward, and the extruder moves to the right.", "not homed first after turning the printer on, but I", "auto-leveling or anything else non-standard on this printer (dual Z", "better access to the extruder), I observe that several channels", "with other PC software manual controls. It doesn't happen often", "It's not so much of a problem, as just a", "I suspect not. It's not so much of a problem,", "much of a problem, as just a question for interest.", "problem, as just a question for interest. Also not sure", "as well as the Z-axis moving up, the bed moves", "subsequent commands have the result I'm expecting. What happens is", "doesn't happen often enough for me to have identified any", "for me to have identified any pattern - maybe it", "some of the time (e.g. changing filament after warming up,", "to the right. I have no auto-leveling or anything else", "pattern - maybe it only happens if I've not homed", "extruder, bed, extruder heat). It even happens if I simply", "several channels move together (and they maybe move slower than", "after warming up, retract gave me some X movement) Printer", "movement, subsequent commands have the result I'm expecting. What happens", "they maybe move slower than I expect). After one 'coupled'", "this printer (dual Z steppers, X, Y, extruder, bed, extruder", "I manually command a single axis movement (typically Z, when", "not. It's not so much of a problem, as just", "I'm expecting. What happens is as well as the Z-axis", "well as the Z-axis moving up, the bed moves forward,", "after turning the printer on, but I suspect not. It's", "extruder), I observe that several channels move together (and they", "homed first after turning the printer on, but I suspect", "but I think I've also observed this with other PC", "even happens if I simply extrude some of the time", "also observed this with other PC software manual controls. It", "the printer on, but I suspect not. It's not so", "a problem, as just a question for interest. Also not", "than I expect). After one 'coupled' movement, subsequent commands have", "have identified any pattern - maybe it only happens if", "on this printer (dual Z steppers, X, Y, extruder, bed,", "together (and they maybe move slower than I expect). After", "single axis movement (typically Z, when I want better access", "manually command a single axis movement (typically Z, when I", "observed this with other PC software manual controls. It doesn't", "extruder heat). It even happens if I simply extrude some", "move slower than I expect). After one 'coupled' movement, subsequent", "maybe it only happens if I've not homed first after", "(and they maybe move slower than I expect). After one", "one 'coupled' movement, subsequent commands have the result I'm expecting.", "else non-standard on this printer (dual Z steppers, X, Y,", "(typically Z, when I want better access to the extruder),", "the bed moves forward, and the extruder moves to the", "commands have the result I'm expecting. What happens is as", "X, Y, extruder, bed, extruder heat). It even happens if", "I think I've also observed this with other PC software", "so much of a problem, as just a question for", "the Z-axis moving up, the bed moves forward, and the", "moves forward, and the extruder moves to the right. I", "other PC software manual controls. It doesn't happen often enough" ]
[ "from the increased extrusion width caused by squashing layers in", "calibration All without success. You can view the gcode and", "All without success. You can view the gcode and S3D", "I'm using: * Simplify3D with Sigma Progen profiles * 0.6mm", "circle. The result is a combination of rough textured surface", "My printer is a BCN3D Sigma R17. I am printing", "thicker, presumably from the increased extrusion width caused by squashing", "increased extrusion width caused by squashing layers in the z-axis.", "* 0.1mm layer height * Spiral (vase mode) * Filaform", "and good quality surface. One half of the print also", "Filaform PLA. As you can see in the images, the", "width * performing full calibration All without success. You can", "presumably from the increased extrusion width caused by squashing layers", "R17. I am printing a thin wall (0.6mm) cup object.", "against it as it moves around in a circle. The", "particular object I'm trying to print. [![A picture of my", "mode) * Filaform PLA. As you can see in the", "around in a circle. The result is a combination of", "to be squeezed out from excess pressure, as if it", "rough textured surface and good quality surface. One half of", "tried * changing model's wall thickness, * disabling spiral mode", "* Simplify3D with Sigma Progen profiles * 0.6mm brass nozzle", "grinds against it as it moves around in a circle.", "the previous layer and grinds against it as it moves", "picture of my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer is a BCN3D", "increasing layer height * changing filament * upgrading printer (latest", "good quality surface. One half of the print also seems", "shows some filament left hanging from a stopped print. It", "seemed to be squeezed out from excess pressure, as if", "if it was being blocked during the print due to", "print. It seemed to be squeezed out from excess pressure,", "few layers print ok, but then the nozzle seems to", "in the z-axis. I’ve tried * changing model's wall thickness,", "in the images, the first few layers print ok, but", "view the gcode and S3D fff profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The", "error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer is a BCN3D Sigma R17. I am", "* changing extrusion width * performing full calibration All without", "printer (latest stepper drivers) * changing extrusion width * performing", "<https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image shows some filament left hanging from a", "wall (0.6mm) cup object. I'm using: * Simplify3D with Sigma", "to one particular object I'm trying to print. [![A picture", "surface. One half of the print also seems to be", "to print. [![A picture of my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer", "trying to print. [![A picture of my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My", "object. I'm using: * Simplify3D with Sigma Progen profiles ", "model's wall thickness, disabling spiral mode * increasing layer", "* Spiral (vase mode) * Filaform PLA. As you can", "I’ve tried * changing model's wall thickness, * disabling spiral", "mode * increasing layer height * changing filament * upgrading", "It seemed to be squeezed out from excess pressure, as", "print also seems to be thicker, presumably from the increased", "of the print also seems to be thicker, presumably from", "but then the nozzle seems to collide/penetrate the previous layer", "strange intermittent printing error specific to one particular object I'm", "BCN3D Sigma R17. I am printing a thin wall (0.6mm)", "Sigma R17. I am printing a thin wall (0.6mm) cup", "nozzle seems to collide/penetrate the previous layer and grinds against", "height * changing filament * upgrading printer (latest stepper drivers)", "(w/thermal paste) * 0.1mm layer height * Spiral (vase mode)", "thin wall (0.6mm) cup object. I'm using: * Simplify3D with", "as if it was being blocked during the print due", "brass nozzle (w/thermal paste) * 0.1mm layer height * Spiral", "of my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer is a BCN3D Sigma", "the print also seems to be thicker, presumably from the", "layer and grinds against it as it moves around in", "a stopped print. It seemed to be squeezed out from", "* 0.6mm brass nozzle (w/thermal paste) * 0.1mm layer height", "specific to one particular object I'm trying to print. [![A", "to collide/penetrate the previous layer and grinds against it as", "layer height * changing filament * upgrading printer (latest stepper", "changing filament * upgrading printer (latest stepper drivers) * changing", "collide/penetrate the previous layer and grinds against it as it", "with Sigma Progen profiles * 0.6mm brass nozzle (w/thermal paste)", "here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image shows some filament left hanging from", "squeezed out from excess pressure, as if it was being", "the nozzle seems to collide/penetrate the previous layer and grinds", "printer is a BCN3D Sigma R17. I am printing a", "print. [![A picture of my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer is", "the z-axis. I’ve tried * changing model's wall thickness, ", "print ok, but then the nozzle seems to collide/penetrate the", "can view the gcode and S3D fff profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing>", "blocked during the print due to being pushed against the", "was being blocked during the print due to being pushed", "using: Simplify3D with Sigma Progen profiles * 0.6mm brass", "without success. You can view the gcode and S3D fff", "the increased extrusion width caused by squashing layers in the", "drivers) * changing extrusion width * performing full calibration All", "* Filaform PLA. As you can see in the images,", "cup object. I'm using: * Simplify3D with Sigma Progen profiles", "layers print ok, but then the nozzle seems to collide/penetrate", "seems to collide/penetrate the previous layer and grinds against it", "printing error specific to one particular object I'm trying to", "performing full calibration All without success. You can view the", "width caused by squashing layers in the z-axis. I’ve tried", "spiral mode * increasing layer height * changing filament ", "you can see in the images, the first few layers", "and grinds against it as it moves around in a", "it was being blocked during the print due to being", "quality surface. One half of the print also seems to", "caused by squashing layers in the z-axis. I’ve tried ", "a thin wall (0.6mm) cup object. I'm using: * Simplify3D", "hanging from a stopped print. It seemed to be squeezed", "0.6mm brass nozzle (w/thermal paste) * 0.1mm layer height ", "stepper drivers) changing extrusion width * performing full calibration", "in a circle. The result is a combination of rough", "object I'm trying to print. [![A picture of my print", "the images, the first few layers print ok, but then", "surface and good quality surface. One half of the print", "layer height * Spiral (vase mode) * Filaform PLA. As", "changing model's wall thickness, * disabling spiral mode * increasing", "Sigma Progen profiles * 0.6mm brass nozzle (w/thermal paste) ", "out from excess pressure, as if it was being blocked", "success. You can view the gcode and S3D fff profile", "S3D fff profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image shows some filament", "a circle. The result is a combination of rough textured", "my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer is a BCN3D Sigma R17.", " changing model's wall thickness, * disabling spiral mode ", "I am having a strange intermittent printing error specific to", "As you can see in the images, the first few", "gcode and S3D fff profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image shows", "paste) 0.1mm layer height * Spiral (vase mode) ", "am printing a thin wall (0.6mm) cup object. I'm using:", "result is a combination of rough textured surface and good", "is a BCN3D Sigma R17. I am printing a thin", "being blocked during the print due to being pushed against", "disabling spiral mode increasing layer height * changing filament", "intermittent printing error specific to one particular object I'm trying", "PLA. As you can see in the images, the first", "and S3D fff profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image shows some", "a BCN3D Sigma R17. I am printing a thin wall", "then the nozzle seems to collide/penetrate the previous layer and", "as it moves around in a circle. The result is", "is a combination of rough textured surface and good quality", "layers in the z-axis. I’ve tried * changing model's wall", "be thicker, presumably from the increased extrusion width caused by", "to be thicker, presumably from the increased extrusion width caused", "also seems to be thicker, presumably from the increased extrusion", "extrusion width * performing full calibration All without success. You", "images, the first few layers print ok, but then the", "be squeezed out from excess pressure, as if it was", "the first few layers print ok, but then the nozzle", "textured surface and good quality surface. One half of the", "0.1mm layer height * Spiral (vase mode) * Filaform PLA.", "combination of rough textured surface and good quality surface. One", "am having a strange intermittent printing error specific to one", "(latest stepper drivers) * changing extrusion width * performing full", "see in the images, the first few layers print ok,", "a strange intermittent printing error specific to one particular object", "filament left hanging from a stopped print. It seemed to", "during the print due to being pushed against the layers.", "The result is a combination of rough textured surface and", "I'm trying to print. [![A picture of my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg)", "it moves around in a circle. The result is a", "image shows some filament left hanging from a stopped print.", "(vase mode) * Filaform PLA. As you can see in", "z-axis. I’ve tried * changing model's wall thickness, * disabling", "the gcode and S3D fff profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image", "I am printing a thin wall (0.6mm) cup object. I'm", "profiles * 0.6mm brass nozzle (w/thermal paste) * 0.1mm layer", "can see in the images, the first few layers print", "squashing layers in the z-axis. I’ve tried * changing model's", "You can view the gcode and S3D fff profile here:", "wall thickness, * disabling spiral mode * increasing layer height", "changing extrusion width * performing full calibration All without success.", "* performing full calibration All without success. You can view", "* upgrading printer (latest stepper drivers) * changing extrusion width", "error specific to one particular object I'm trying to print.", "printing a thin wall (0.6mm) cup object. I'm using: ", "a combination of rough textured surface and good quality surface.", "pressure, as if it was being blocked during the print", "height Spiral (vase mode) * Filaform PLA. As you", "filament * upgrading printer (latest stepper drivers) * changing extrusion", "from a stopped print. It seemed to be squeezed out", "Spiral (vase mode) * Filaform PLA. As you can see", "previous layer and grinds against it as it moves around", "One half of the print also seems to be thicker,", "it as it moves around in a circle. The result", "moves around in a circle. The result is a combination", "half of the print also seems to be thicker, presumably", "stopped print. It seemed to be squeezed out from excess", "excess pressure, as if it was being blocked during the", "* changing filament * upgrading printer (latest stepper drivers) ", "(0.6mm) cup object. I'm using: Simplify3D with Sigma Progen", "thickness, * disabling spiral mode * increasing layer height ", "by squashing layers in the z-axis. I’ve tried changing", "one particular object I'm trying to print. [![A picture of", "The image shows some filament left hanging from a stopped", "Progen profiles * 0.6mm brass nozzle (w/thermal paste) * 0.1mm", "upgrading printer (latest stepper drivers) * changing extrusion width ", "print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer is a BCN3D Sigma R17. I", "extrusion width caused by squashing layers in the z-axis. I’ve", "having a strange intermittent printing error specific to one particular", "from excess pressure, as if it was being blocked during", "Simplify3D with Sigma Progen profiles 0.6mm brass nozzle (w/thermal", "nozzle (w/thermal paste) * 0.1mm layer height * Spiral (vase", "* disabling spiral mode * increasing layer height * changing", "full calibration All without success. You can view the gcode", "[![A picture of my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer is a", "seems to be thicker, presumably from the increased extrusion width", "profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image shows some filament left hanging", "of rough textured surface and good quality surface. One half", "fff profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image shows some filament left", "first few layers print ok, but then the nozzle seems", "left hanging from a stopped print. It seemed to be", "* increasing layer height * changing filament * upgrading printer", "ok, but then the nozzle seems to collide/penetrate the previous", "some filament left hanging from a stopped print. It seemed" ]
[ "at 60°C; * 1.75 mm filament, and; * 0.4 mm", "a print and the skirt goes down fine, then the", "down fine, then the outline of the parts go down", "to fill in the first layer, it will always get", "this? * Printing PLA at 210°C; * First layer temp", "and the skirt goes down fine, then the outline of", "225°C; * Bed temp at 60°C; * 1.75 mm filament,", "goes down fine, then the outline of the parts go", "get stuck to the hotend at some point and rip", "Bed temp at 60°C; * 1.75 mm filament, and; ", "rip apart the layer. Any ideas on how to solve", "the skirt goes down fine, then the outline of the", "layer. Any ideas on how to solve this? Printing", "* First layer temp is 225°C; * Bed temp at", "the hotend at some point and rip apart the layer.", "to the hotend at some point and rip apart the", "down fine (usually) and then when it goes to fill", "some point and rip apart the layer. Any ideas on", "layer, it will always get stuck to the hotend at", "fine, then the outline of the parts go down fine", "stuck to the hotend at some point and rip apart", "wits end with this problem. I start a print and", "layer temp is 225°C; * Bed temp at 60°C; ", "60°C; 1.75 mm filament, and; * 0.4 mm nozzle.", "of the parts go down fine (usually) and then when", "to solve this? * Printing PLA at 210°C; * First", "* 1.75 mm filament, and; * 0.4 mm nozzle. Maker", "I start a print and the skirt goes down fine,", "my wits end with this problem. I start a print", "parts go down fine (usually) and then when it goes", "temp is 225°C; * Bed temp at 60°C; * 1.75", "ideas on how to solve this? * Printing PLA at", "skirt goes down fine, then the outline of the parts", "first layer, it will always get stuck to the hotend", "I am at my wits end with this problem. I", "this problem. I start a print and the skirt goes", "(usually) and then when it goes to fill in the", "1.75 mm filament, and; * 0.4 mm nozzle. Maker Select", "it will always get stuck to the hotend at some", "on how to solve this? * Printing PLA at 210°C;", "am at my wits end with this problem. I start", "problem. I start a print and the skirt goes down", "and then when it goes to fill in the first", "at my wits end with this problem. I start a", "at some point and rip apart the layer. Any ideas", "how to solve this? * Printing PLA at 210°C; ", " Bed temp at 60°C; * 1.75 mm filament, and;", "the outline of the parts go down fine (usually) and", "outline of the parts go down fine (usually) and then", "go down fine (usually) and then when it goes to", "solve this? * Printing PLA at 210°C; * First layer", "and; * 0.4 mm nozzle. Maker Select V2.1, using Cura", "mm filament, and; * 0.4 mm nozzle. Maker Select V2.1,", "apart the layer. Any ideas on how to solve this?", "fine (usually) and then when it goes to fill in", "when it goes to fill in the first layer, it", "fill in the first layer, it will always get stuck", "point and rip apart the layer. Any ideas on how", "then when it goes to fill in the first layer,", "210°C; * First layer temp is 225°C; * Bed temp", "filament, and; * 0.4 mm nozzle. Maker Select V2.1, using", "* Printing PLA at 210°C; * First layer temp is", "First layer temp is 225°C; * Bed temp at 60°C;", "the layer. Any ideas on how to solve this? ", "the first layer, it will always get stuck to the", "and rip apart the layer. Any ideas on how to", "will always get stuck to the hotend at some point", "end with this problem. I start a print and the", "print and the skirt goes down fine, then the outline", "it goes to fill in the first layer, it will", "in the first layer, it will always get stuck to", "is 225°C; Bed temp at 60°C; * 1.75 mm", "always get stuck to the hotend at some point and", "at 210°C; * First layer temp is 225°C; * Bed", "then the outline of the parts go down fine (usually)", "Printing PLA at 210°C; * First layer temp is 225°C;", "PLA at 210°C; * First layer temp is 225°C; ", "the parts go down fine (usually) and then when it", "0.4 mm nozzle. Maker Select V2.1, using Cura to slice.", "Any ideas on how to solve this? Printing PLA", "start a print and the skirt goes down fine, then", "* 0.4 mm nozzle. Maker Select V2.1, using Cura to", "goes to fill in the first layer, it will always", "temp at 60°C; * 1.75 mm filament, and; * 0.4", "with this problem. I start a print and the skirt", "hotend at some point and rip apart the layer. Any" ]
[ "(units are in mm) #define X_MIN_POS 5.0 #define Y_MIN_POS 0.0", "in the `configuration.h` file. When using mesh bed leveling, the", "next two points are off the end of the bed.", "are off the end of the bed. Here are my", "after homing (units are in mm) #define X_MIN_POS 5.0 #define", "corner on the bed perfectly after setting the x-min to", "a RAMPS board on an Anet A8 printer. The bed", "board on an Anet A8 printer. The bed size for", "size for the printer is 220 x 220 mm and", "the next two points are off the end of the", "A8 printer. The bed size for the printer is 220", "#define X_MIN_POS 5.0 #define Y_MIN_POS 0.0 #define Z_MIN_POS 0 #define", "the bed perfectly after setting the x-min to 5.0 but", "Travel limits after homing (units are in mm) #define X_MIN_POS", "with a RAMPS board on an Anet A8 printer. The", "When using mesh bed leveling, the nozzle jumps to the", "leveling, the nozzle jumps to the first corner on the", "the bed. Here are my settings: ``` // Travel limits", "The bed size for the printer is 220 x 220", "file. When using mesh bed leveling, the nozzle jumps to", "the nozzle jumps to the first corner on the bed", "the `configuration.h` file. When using mesh bed leveling, the nozzle", "perfectly after setting the x-min to 5.0 but the next", "5.0 #define Y_MIN_POS 0.0 #define Z_MIN_POS 0 #define X_MAX_POS 220", "x 220 mm and that is stated in the `configuration.h`", "an Anet A8 printer. The bed size for the printer", "am using Marlin firmware with a RAMPS board on an", "mesh bed leveling, the nozzle jumps to the first corner", "on the bed perfectly after setting the x-min to 5.0", "of the bed. Here are my settings: ``` // Travel", "firmware with a RAMPS board on an Anet A8 printer.", "5.0 but the next two points are off the end", "settings: ``` // Travel limits after homing (units are in", "using mesh bed leveling, the nozzle jumps to the first", "are my settings: ``` // Travel limits after homing (units", "my settings: ``` // Travel limits after homing (units are", "220 x 220 mm and that is stated in the", "is 220 x 220 mm and that is stated in", "``` // Travel limits after homing (units are in mm)", "Y_MAX_POS 220 #define Z_MAX_POS 240 ``` What could be my", "bed. Here are my settings: ``` // Travel limits after", "the first corner on the bed perfectly after setting the", "in mm) #define X_MIN_POS 5.0 #define Y_MIN_POS 0.0 #define Z_MIN_POS", "but the next two points are off the end of", "Y_MIN_POS 0.0 #define Z_MIN_POS 0 #define X_MAX_POS 220 #define Y_MAX_POS", "are in mm) #define X_MIN_POS 5.0 #define Y_MIN_POS 0.0 #define", "homing (units are in mm) #define X_MIN_POS 5.0 #define Y_MIN_POS", "printer is 220 x 220 mm and that is stated", "after setting the x-min to 5.0 but the next two", "the printer is 220 x 220 mm and that is", "bed leveling, the nozzle jumps to the first corner on", "for the printer is 220 x 220 mm and that", "points are off the end of the bed. Here are", "x-min to 5.0 but the next two points are off", "limits after homing (units are in mm) #define X_MIN_POS 5.0", "mm and that is stated in the `configuration.h` file. When", "on an Anet A8 printer. The bed size for the", "printer. The bed size for the printer is 220 x", "that is stated in the `configuration.h` file. When using mesh", "Anet A8 printer. The bed size for the printer is", "to 5.0 but the next two points are off the", "RAMPS board on an Anet A8 printer. The bed size", "`configuration.h` file. When using mesh bed leveling, the nozzle jumps", "bed perfectly after setting the x-min to 5.0 but the", "220 #define Y_MAX_POS 220 #define Z_MAX_POS 240 ``` What could", "0.0 #define Z_MIN_POS 0 #define X_MAX_POS 220 #define Y_MAX_POS 220", "bed size for the printer is 220 x 220 mm", "X_MAX_POS 220 #define Y_MAX_POS 220 #define Z_MAX_POS 240 ``` What", "first corner on the bed perfectly after setting the x-min", "#define Y_MAX_POS 220 #define Z_MAX_POS 240 ``` What could be", "end of the bed. Here are my settings: ``` //", "// Travel limits after homing (units are in mm) #define", "jumps to the first corner on the bed perfectly after", "220 mm and that is stated in the `configuration.h` file.", "stated in the `configuration.h` file. When using mesh bed leveling,", "is stated in the `configuration.h` file. When using mesh bed", "setting the x-min to 5.0 but the next two points", "I am using Marlin firmware with a RAMPS board on", "Here are my settings: ``` // Travel limits after homing", "nozzle jumps to the first corner on the bed perfectly", "off the end of the bed. Here are my settings:", "using Marlin firmware with a RAMPS board on an Anet", "0 #define X_MAX_POS 220 #define Y_MAX_POS 220 #define Z_MAX_POS 240", "Z_MIN_POS 0 #define X_MAX_POS 220 #define Y_MAX_POS 220 #define Z_MAX_POS", "#define Y_MIN_POS 0.0 #define Z_MIN_POS 0 #define X_MAX_POS 220 #define", "two points are off the end of the bed. Here", "the x-min to 5.0 but the next two points are", "the end of the bed. Here are my settings: ```", "220 #define Z_MAX_POS 240 ``` What could be my issue?", "mm) #define X_MIN_POS 5.0 #define Y_MIN_POS 0.0 #define Z_MIN_POS 0", "#define Z_MIN_POS 0 #define X_MAX_POS 220 #define Y_MAX_POS 220 #define", "Marlin firmware with a RAMPS board on an Anet A8", "X_MIN_POS 5.0 #define Y_MIN_POS 0.0 #define Z_MIN_POS 0 #define X_MAX_POS", "and that is stated in the `configuration.h` file. When using", "#define X_MAX_POS 220 #define Y_MAX_POS 220 #define Z_MAX_POS 240 ```", "to the first corner on the bed perfectly after setting" ]
[ "before each print, the printer does auto bedding two times", "auto bedding is ignored and printer acts like before doing", "but when print starts the auto bedding is ignored and", "acts like before doing auto bed. Please help me solve", "print, the printer does auto bedding two times but when", "= &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd);", "} ``` Now before each print, the printer does auto", "char cmd[4 + strlen(name) + 1]; // Room for \"M23", "I found this code in `cardreader.cpp` ``` void CardReader::openAndPrintFile(const char", "CardReader::openAndPrintFile(const char name) { char cmd[4 + strlen(name) + 1];", "+ 1]; // Room for \"M23 \", filename, and null", "each print. When I enable auto bed level in `configuration.h`,", "is ignored and printer acts like before doing auto bed.", "``` and changed it to ``` void CardReader::openAndPrintFile(const char name)", "before each print. When I enable auto bed level in", "print. When I enable auto bed level in `configuration.h`, it", "it only shows auto bed* in menu. I found this", "`configuration.h`, it only shows auto bed in menu. I found", "`cardreader.cpp` ``` void CardReader::openAndPrintFile(const char name) { char cmd[4 +", "menu. I found this code in `cardreader.cpp` ``` void CardReader::openAndPrintFile(const", "does auto bedding two* times but when print starts the", "and changed it to ``` void CardReader::openAndPrintFile(const char name) {", "// Room for \"M23 \", filename, and null sprintf_P(cmd, PSTR(\"M23", "printer does auto bedding two* times but when print starts", "name); for (char c = &cmd[4]; c; c++) c =", "found this code in `cardreader.cpp` ``` void CardReader::openAndPrintFile(const char name)", "} ``` and changed it to ``` void CardReader::openAndPrintFile(const char", "times but when print starts the auto bedding is ignored", "1]; // Room for \"M23 \", filename, and null sprintf_P(cmd,", "enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` Now before each print, the printer", "printer acts like before doing auto bed. Please help me", "%s\"), name); for (char c = &cmd[4]; c; c++) c", "I enable auto bed level in `configuration.h`, it only shows", "leveling before each print. When I enable auto bed level", "in `cardreader.cpp` ``` void CardReader::openAndPrintFile(const char name) { char cmd[4", "print starts the auto bedding is ignored and printer acts", "for (char c = &cmd[4]; c; c++) c = tolower(c);", "this code in `cardreader.cpp` ``` void CardReader::openAndPrintFile(const char name) {", "void CardReader::openAndPrintFile(const char name) { char cmd[4 + strlen(name) +", "cmd[4 + strlen(name) + 1]; // Room for \"M23 \",", "two times but when print starts the auto bedding is", "before doing auto bed. Please help me solve this. I'm", "enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` Now before each print,", "= &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); }", "When I enable auto bed level in `configuration.h`, it only", "in menu. I found this code in `cardreader.cpp` ``` void", "strlen(name) + 1]; // Room for \"M23 \", filename, and", "auto bed level in `configuration.h`, it only shows auto bed", "PSTR(\"M23 %s\"), name); for (char c = &cmd[4]; c; c++)", "&cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\"));", "starts the auto bedding is ignored and printer acts like", "Now before each print, the printer does auto bedding two", "c = tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` Now", "the printer does auto bedding two times but when print", "(char c = &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(\"G28\");", "shows auto bed in menu. I found this code in", "like before doing auto bed. Please help me solve this.", "(char c = &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(cmd);", "char name) { char cmd[4 + strlen(name) + 1]; //", "c = tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` and changed it", "``` void CardReader::openAndPrintFile(const char name) { char cmd[4 + strlen(name)", "each print, the printer does auto bedding two times but", "bedding two times but when print starts the auto bedding", "enable auto bed level in `configuration.h`, it only shows *auto", "tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` and changed it to ```", "= tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` Now before", "enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` Now before each print, the", "enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` Now before each print, the printer does", "c; c++) c = tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` and", "enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` and changed it to ``` void CardReader::openAndPrintFile(const", "want to add auto bed leveling before each print. When", "to ``` void CardReader::openAndPrintFile(const char name) { char cmd[4 +", "doing auto bed. Please help me solve this. I'm using", "sprintf_P(cmd, PSTR(\"M23 %s\"), name); for (char c = &cmd[4]; c;", "{ char cmd[4 + strlen(name) + 1]; // Room for", "c++) c = tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ```", "auto bed* in menu. I found this code in `cardreader.cpp`", "when print starts the auto bedding is ignored and printer", "c = &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\"));", "&cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ```", "it to ``` void CardReader::openAndPrintFile(const char name) { char cmd[4", "c; c++) c = tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); }", "level in `configuration.h`, it only shows auto bed* in menu.", "changed it to ``` void CardReader::openAndPrintFile(const char name) { char", "bed* in menu. I found this code in `cardreader.cpp` ```", "for \"M23 \", filename, and null sprintf_P(cmd, PSTR(\"M23 %s\"), name);", "auto bed. Please help me solve this. I'm using Marlin", "auto bedding two times but when print starts the auto", "ignored and printer acts like before doing auto bed. Please", "and printer acts like before doing auto bed. Please help", "Room for \"M23 \", filename, and null sprintf_P(cmd, PSTR(\"M23 %s\"),", "in `configuration.h`, it only shows auto bed in menu. I", "= tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` and changed it to", "\"M23 \", filename, and null sprintf_P(cmd, PSTR(\"M23 %s\"), name); for", "+ strlen(name) + 1]; // Room for \"M23 \", filename,", "bed. Please help me solve this. I'm using Marlin Firmware", "tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` Now before each", "and null sprintf_P(cmd, PSTR(\"M23 %s\"), name); for (char c =", "I want to add auto bed leveling before each print.", "add auto bed leveling before each print. When I enable", "auto bed leveling before each print. When I enable auto", "``` Now before each print, the printer does auto bedding", "\", filename, and null sprintf_P(cmd, PSTR(\"M23 %s\"), name); for (char", "bedding is ignored and printer acts like before doing auto", "null sprintf_P(cmd, PSTR(\"M23 %s\"), name); for (char c = &cmd[4];", "only shows auto bed in menu. I found this code", "code in `cardreader.cpp` ``` void CardReader::openAndPrintFile(const char name) { char", "c++) c = tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` and changed", "name) { char cmd[4 + strlen(name) + 1]; // Room", "Please help me solve this. I'm using Marlin Firmware 1.1.0.", "filename, and null sprintf_P(cmd, PSTR(\"M23 %s\"), name); for (char c", "bed leveling before each print. When I enable auto bed", "the auto bedding is ignored and printer acts like before", "bed level in `configuration.h`, it only shows auto bed* in", "to add auto bed leveling before each print. When I", "enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` and changed it to ``` void", "c = &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\");" ]
[ "like to start 3d printing in wax. Is there a", "of it? Am I right in assuming that all I", "a reasonably priced 3d printer that is capable of it?", "3d printer that is capable of it? Am I right", "all I need is to make my own filament and", "make my own filament and set extruder temperature correctly, or", "there a reasonably priced 3d printer that is capable of", "is to make my own filament and set extruder temperature", "start 3d printing in wax. Is there a reasonably priced", "I right in assuming that all I need is to", "printing in wax. Is there a reasonably priced 3d printer", "to start 3d printing in wax. Is there a reasonably", "Am I right in assuming that all I need is", "capable of it? Am I right in assuming that all", "filament and set extruder temperature correctly, or do I miss", "in wax. Is there a reasonably priced 3d printer that", "I'd like to start 3d printing in wax. Is there", "that is capable of it? Am I right in assuming", "my own filament and set extruder temperature correctly, or do", "wax. Is there a reasonably priced 3d printer that is", "priced 3d printer that is capable of it? Am I", "need is to make my own filament and set extruder", "and set extruder temperature correctly, or do I miss something?", "is capable of it? Am I right in assuming that", "own filament and set extruder temperature correctly, or do I", "in assuming that all I need is to make my", "Is there a reasonably priced 3d printer that is capable", "right in assuming that all I need is to make", "assuming that all I need is to make my own", "I need is to make my own filament and set", "reasonably priced 3d printer that is capable of it? Am", "to make my own filament and set extruder temperature correctly,", "3d printing in wax. Is there a reasonably priced 3d", "it? Am I right in assuming that all I need", "printer that is capable of it? Am I right in", "that all I need is to make my own filament" ]
[ "Z5 F500 ; move Z 5mm away so we can", "home all axes at homing speed G92 X0 Y0 Z0", "the start code I found. I have tried it in", "is appreciated!! ``` ; -- START GCODE -- M136 ;", "version like 2.5 or anything relatively new. Here is the", "Z 5mm away so we can carefully hit the limit", "F3300 ; move to waiting position M116 ; wait for", "because the slicer's next extrusion is relative to this 0", "wait for heat up G1 X110 Y-72 Z30 F3300 ;", "G92 X0 Y0 Z0 A0 B0 ; set all coords", "; home all axes at homing speed G92 X0 Y0", "we can carefully hit the limit switch G161 Z F100", "extrude a line of filament along the right edge of", "after getting fed up with MakerBot software, I've started using", "X110 Y-72 Z30 F3300 ; move to waiting position M116", "FlashForge Creator Pro, or Replicator 1 Dual. I have upgraded", "huge upgrade compared to MakerWare. But, I would really like", "purge and wipe G92 E0 ; set current extruder position", "home Z slowly M132 X Y Z ; recall stored", "for XYZ axes ; ; wait for heat up G1", "at eeprom level (probably 40) ; ; home and recall", "1 Dual. I have upgraded the power supply and added", "build M73 P0 G90 ; absolute coordinates ; ; set", "Z0.2 F2400.0 ; move to just on the bed G1", "architect which is a barebones clone of the FlashForge Creator", "process with GPX. I did a lot of searching and", "; set current extruder position as 0 so that E15", "temperatures and assert Vref M140 S{print_bed_temperature} M104 S{print_temperature} T0 G130", "so we can carefully hit the limit switch G161 Z", "all coords to 0 for now G1 Z5 F500 ;", "and end G-code for this particular printer. The only catch", "is the start code I found. I have tried it", "GCODE -- M136 ; start build M73 P0 G90 ;", "Y-70 Z0.2 F2400.0 ; move to just on the bed", "E15 F1200.000 ; extrude a line of filament along the", "the Z stepper vref stay at eeprom level (probably 40)", "recall eeprom home position T0 ; home on the right", "The only catch is that his code only works on", "Cura to slice then post process with GPX. I did", "I found. I have tried it in 2.5 with error", "upgrade compared to MakerWare. But, I would really like to", "posted their start and end G-code for this particular printer.", "G1 X110 Y-70 Z0.2 F2400.0 ; move to just on", "Z0 A0 B0 ; set all coords to 0 for", "barebones clone of the FlashForge Creator Pro, or Replicator 1", "limit switch G161 Z F100 ; home Z slowly M132", "end G-code for this particular printer. The only catch is", "; ; Sliced at: {day} {date} {time} ; Basic settings:", "in 2.5 with error in post processing. Any help is", "; Filament cost: {filament_cost} ; -- end of START GCODE", "Z ; recall stored home offsets for XYZ axes ;", "catch is that his code only works on version 15.04.", "finally found someone who posted their start and end G-code", "Print time: {print_time} ; Filament used: {filament_amount}m {filament_weight}g ; Filament", "or Replicator 1 Dual. I have upgraded the power supply", "which is a barebones clone of the FlashForge Creator Pro,", "G1 X110 Y70 E15 F1200.000 ; extrude a line of", "M136 ; start build M73 P0 G90 ; absolute coordinates", "set temperatures and assert Vref M140 S{print_bed_temperature} M104 S{print_temperature} T0", "G130 X118 Y118 A118 B118 ; set stepper motor Vref", "15.04. Don't get me wrong, 15.04 is a huge upgrade", "axes at homing speed G92 X0 Y0 Z0 A0 B0", "Monoprice architect which is a barebones clone of the FlashForge", "{layer_height} Walls: {wall_thickness} Fill: {fill_density} ; Print time: {print_time} ;", "post processing. Any help is appreciated!! ``` ; -- START", "the bed G92 E0 ; set E to 0 again", "relatively new. Here is the start code I found. I", "Z F100 ; home Z slowly M132 X Y Z", "MakerWare. But, I would really like to start using a", "a heated bed and, after getting fed up with MakerBot", "position M116 ; wait for temps ; ; purge and", "of filament along the right edge of the bed G92", "did a lot of searching and finally found someone who", "is a huge upgrade compared to MakerWare. But, I would", "a barebones clone of the FlashForge Creator Pro, or Replicator", "and, after getting fed up with MakerBot software, I've started", "Dual. I have upgraded the power supply and added a", "stored home offsets for XYZ axes ; ; wait for", "coords to 0 for now G1 Z5 F500 ; move", "0 so that E15 below makes sense G1 X110 Y-70", "``` ; -- START GCODE -- M136 ; start build", "found someone who posted their start and end G-code for", "{filament_amount}m {filament_weight}g ; Filament cost: {filament_cost} ; -- end of", "start using a newer version like 2.5 or anything relatively", "; home and recall eeprom home position T0 ; home", "; -- START GCODE -- M136 ; start build M73", "M132 X Y Z ; recall stored home offsets for", "now G1 Z5 F500 ; move Z 5mm away so", "would really like to start using a newer version like", "B118 ; set stepper motor Vref to defaults ; let", "or anything relatively new. Here is the start code I", "T0 G130 X118 Y118 A118 B118 ; set stepper motor", "wait for temps ; ; purge and wipe G92 E0", "; home Z slowly M132 X Y Z ; recall", "code only works on version 15.04. Don't get me wrong,", "all axes at homing speed G92 X0 Y0 Z0 A0", "set stepper motor Vref to defaults ; let the Z", "edge of the bed G92 E0 ; set E to", "get me wrong, 15.04 is a huge upgrade compared to", "G90 ; absolute coordinates ; ; set temperatures and assert", "offsets for XYZ axes ; ; wait for heat up", "; ; wait for heat up G1 X110 Y-72 Z30", "; ; set temperatures and assert Vref M140 S{print_bed_temperature} M104", "; start build M73 P0 G90 ; absolute coordinates ;", "{day} {date} {time} ; Basic settings: Layer height: {layer_height} Walls:", "a newer version like 2.5 or anything relatively new. Here", "; wait for heat up G1 X110 Y-72 Z30 F3300", "{filament_weight}g ; Filament cost: {filament_cost} ; -- end of START", "Replicator 1 Dual. I have upgraded the power supply and", "Z30 F3300 ; move to waiting position M116 ; wait", "to this 0 ; ; Sliced at: {day} {date} {time}", "cost: {filament_cost} ; -- end of START GCODE -- ```", "at: {day} {date} {time} ; Basic settings: Layer height: {layer_height}", "E0 ; set E to 0 again because the slicer's", "carefully hit the limit switch G161 Z F100 ; home", "G1 Z5 F500 ; move Z 5mm away so we", "to slice then post process with GPX. I did a", "-- M136 ; start build M73 P0 G90 ; absolute", "; ; home and recall eeprom home position T0 ;", "to start using a newer version like 2.5 or anything", "of the FlashForge Creator Pro, or Replicator 1 Dual. I", "the power supply and added a heated bed and, after", "set E to 0 again because the slicer's next extrusion", "me wrong, 15.04 is a huge upgrade compared to MakerWare.", "Y118 A118 B118 ; set stepper motor Vref to defaults", "start and end G-code for this particular printer. The only", "just on the bed G1 X110 Y70 E15 F1200.000 ;", "GPX. I did a lot of searching and finally found", "40) ; ; home and recall eeprom home position T0", "using a newer version like 2.5 or anything relatively new.", "move to just on the bed G1 X110 Y70 E15", "; Print time: {print_time} ; Filament used: {filament_amount}m {filament_weight}g ;", "like to start using a newer version like 2.5 or", "Filament used: {filament_amount}m {filament_weight}g ; Filament cost: {filament_cost} ; --", "lot of searching and finally found someone who posted their", "Y Z ; home all axes at homing speed G92", "anything relatively new. Here is the start code I found.", "vref stay at eeprom level (probably 40) ; ; home", "; recall stored home offsets for XYZ axes ; ;", "found. I have tried it in 2.5 with error in", "to MakerWare. But, I would really like to start using", "X Y Z ; home all axes at homing speed", "0 ; ; Sliced at: {day} {date} {time} ; Basic", "G1 X110 Y-72 Z30 F3300 ; move to waiting position", "only works on version 15.04. Don't get me wrong, 15.04", "temps ; ; purge and wipe G92 E0 ; set", "extruder position as 0 so that E15 below makes sense", "M73 P0 G90 ; absolute coordinates ; ; set temperatures", "axes ; ; wait for heat up G1 X110 Y-72", "appreciated!! ``` ; -- START GCODE -- M136 ; start", "to just on the bed G1 X110 Y70 E15 F1200.000", "Walls: {wall_thickness} Fill: {fill_density} ; Print time: {print_time} ; Filament", "Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ; Print time:", "Vref M140 S{print_bed_temperature} M104 S{print_temperature} T0 G130 X118 Y118 A118", "coordinates ; ; set temperatures and assert Vref M140 S{print_bed_temperature}", "M116 ; wait for temps ; ; purge and wipe", "homing speed G92 X0 Y0 Z0 A0 B0 ; set", "to 0 for now G1 Z5 F500 ; move Z", "below makes sense G1 X110 Y-70 Z0.2 F2400.0 ; move", "height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ; Print time: {print_time}", "error in post processing. Any help is appreciated!! ``` ;", "T0 ; home on the right nozzle G28 X Y", "0 for now G1 Z5 F500 ; move Z 5mm", "; let the Z stepper vref stay at eeprom level", "move to waiting position M116 ; wait for temps ;", "M104 S{print_temperature} T0 G130 X118 Y118 A118 B118 ; set", "{time} ; Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill:", "again because the slicer's next extrusion is relative to this", "waiting position M116 ; wait for temps ; ; purge", "with GPX. I did a lot of searching and finally", "Y0 Z0 A0 B0 ; set all coords to 0", "Z stepper vref stay at eeprom level (probably 40) ;", "X118 Y118 A118 B118 ; set stepper motor Vref to", "right nozzle G28 X Y Z ; home all axes", "relative to this 0 ; ; Sliced at: {day} {date}", "heat up G1 X110 Y-72 Z30 F3300 ; move to", "set all coords to 0 for now G1 Z5 F500", "is that his code only works on version 15.04. Don't", "line of filament along the right edge of the bed", "and finally found someone who posted their start and end", "a huge upgrade compared to MakerWare. But, I would really", "used: {filament_amount}m {filament_weight}g ; Filament cost: {filament_cost} ; -- end", "2.5 or anything relatively new. Here is the start code", "the FlashForge Creator Pro, or Replicator 1 Dual. I have", "for heat up G1 X110 Y-72 Z30 F3300 ; move", "that E15 below makes sense G1 X110 Y-70 Z0.2 F2400.0", "; home on the right nozzle G28 X Y Z", "; set E to 0 again because the slicer's next", "using Cura to slice then post process with GPX. I", "who posted their start and end G-code for this particular", "started using Cura to slice then post process with GPX.", "for now G1 Z5 F500 ; move Z 5mm away", "M140 S{print_bed_temperature} M104 S{print_temperature} T0 G130 X118 Y118 A118 B118", "then post process with GPX. I did a lot of", "E to 0 again because the slicer's next extrusion is", "nozzle G28 X Y Z ; home all axes at", "Vref to defaults ; let the Z stepper vref stay", "with MakerBot software, I've started using Cura to slice then", "Any help is appreciated!! ``` ; -- START GCODE --", "next extrusion is relative to this 0 ; ; Sliced", "Y Z ; recall stored home offsets for XYZ axes", "the slicer's next extrusion is relative to this 0 ;", "; set stepper motor Vref to defaults ; let the", "to waiting position M116 ; wait for temps ; ;", "getting fed up with MakerBot software, I've started using Cura", "A0 B0 ; set all coords to 0 for now", "F500 ; move Z 5mm away so we can carefully", "bed G1 X110 Y70 E15 F1200.000 ; extrude a line", "G161 Z F100 ; home Z slowly M132 X Y", "15.04 is a huge upgrade compared to MakerWare. But, I", "I would really like to start using a newer version", "I have tried it in 2.5 with error in post", "; absolute coordinates ; ; set temperatures and assert Vref", "-- START GCODE -- M136 ; start build M73 P0", "S{print_bed_temperature} M104 S{print_temperature} T0 G130 X118 Y118 A118 B118 ;", "; move to waiting position M116 ; wait for temps", "have a Monoprice architect which is a barebones clone of", "the limit switch G161 Z F100 ; home Z slowly", "to defaults ; let the Z stepper vref stay at", "Fill: {fill_density} ; Print time: {print_time} ; Filament used: {filament_amount}m", "; set temperatures and assert Vref M140 S{print_bed_temperature} M104 S{print_temperature}", "F1200.000 ; extrude a line of filament along the right", "; extrude a line of filament along the right edge", "A118 B118 ; set stepper motor Vref to defaults ;", "; ; purge and wipe G92 E0 ; set current", "Don't get me wrong, 15.04 is a huge upgrade compared", "set current extruder position as 0 so that E15 below", "tried it in 2.5 with error in post processing. Any", "and added a heated bed and, after getting fed up", "this 0 ; ; Sliced at: {day} {date} {time} ;", "time: {print_time} ; Filament used: {filament_amount}m {filament_weight}g ; Filament cost:", "only catch is that his code only works on version", "; set all coords to 0 for now G1 Z5", "0 again because the slicer's next extrusion is relative to", "of the bed G92 E0 ; set E to 0", "right edge of the bed G92 E0 ; set E", "Sliced at: {day} {date} {time} ; Basic settings: Layer height:", "away so we can carefully hit the limit switch G161", "; Filament used: {filament_amount}m {filament_weight}g ; Filament cost: {filament_cost} ;", "Creator Pro, or Replicator 1 Dual. I have upgraded the", "on the right nozzle G28 X Y Z ; home", "eeprom level (probably 40) ; ; home and recall eeprom", "processing. Any help is appreciated!! ``` ; -- START GCODE", "current extruder position as 0 so that E15 below makes", "{date} {time} ; Basic settings: Layer height: {layer_height} Walls: {wall_thickness}", "start code I found. I have tried it in 2.5", "G28 X Y Z ; home all axes at homing", "X Y Z ; recall stored home offsets for XYZ", "{print_time} ; Filament used: {filament_amount}m {filament_weight}g ; Filament cost: {filament_cost}", "stepper vref stay at eeprom level (probably 40) ; ;", "extrusion is relative to this 0 ; ; Sliced at:", "G92 E0 ; set current extruder position as 0 so", "Y-72 Z30 F3300 ; move to waiting position M116 ;", "home and recall eeprom home position T0 ; home on", "settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ; Print", "for this particular printer. The only catch is that his", "bed G92 E0 ; set E to 0 again because", "hit the limit switch G161 Z F100 ; home Z", "and wipe G92 E0 ; set current extruder position as", "the right nozzle G28 X Y Z ; home all", "on version 15.04. Don't get me wrong, 15.04 is a", "let the Z stepper vref stay at eeprom level (probably", "as 0 so that E15 below makes sense G1 X110", "E0 ; set current extruder position as 0 so that", "Filament cost: {filament_cost} ; -- end of START GCODE --", "home on the right nozzle G28 X Y Z ;", "up G1 X110 Y-72 Z30 F3300 ; move to waiting", "at homing speed G92 X0 Y0 Z0 A0 B0 ;", "Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;", "assert Vref M140 S{print_bed_temperature} M104 S{print_temperature} T0 G130 X118 Y118", "; purge and wipe G92 E0 ; set current extruder", "5mm away so we can carefully hit the limit switch", "Z slowly M132 X Y Z ; recall stored home", "really like to start using a newer version like 2.5", "(probably 40) ; ; home and recall eeprom home position", "slowly M132 X Y Z ; recall stored home offsets", "can carefully hit the limit switch G161 Z F100 ;", "bed and, after getting fed up with MakerBot software, I've", "have tried it in 2.5 with error in post processing.", "a line of filament along the right edge of the", "{fill_density} ; Print time: {print_time} ; Filament used: {filament_amount}m {filament_weight}g", "makes sense G1 X110 Y-70 Z0.2 F2400.0 ; move to", "; Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}", "wipe G92 E0 ; set current extruder position as 0", "his code only works on version 15.04. Don't get me", "particular printer. The only catch is that his code only", "printer. The only catch is that his code only works", "works on version 15.04. Don't get me wrong, 15.04 is", "{wall_thickness} Fill: {fill_density} ; Print time: {print_time} ; Filament used:", "Here is the start code I found. I have tried", "G-code for this particular printer. The only catch is that", "F100 ; home Z slowly M132 X Y Z ;", "Y70 E15 F1200.000 ; extrude a line of filament along", "upgraded the power supply and added a heated bed and,", "XYZ axes ; ; wait for heat up G1 X110", "X110 Y-70 Z0.2 F2400.0 ; move to just on the", "defaults ; let the Z stepper vref stay at eeprom", "of searching and finally found someone who posted their start", "MakerBot software, I've started using Cura to slice then post", "the right edge of the bed G92 E0 ; set", "position T0 ; home on the right nozzle G28 X", "wrong, 15.04 is a huge upgrade compared to MakerWare. But,", "code I found. I have tried it in 2.5 with", "clone of the FlashForge Creator Pro, or Replicator 1 Dual.", "G92 E0 ; set E to 0 again because the", "searching and finally found someone who posted their start and", "up with MakerBot software, I've started using Cura to slice", "slice then post process with GPX. I did a lot", "and assert Vref M140 S{print_bed_temperature} M104 S{print_temperature} T0 G130 X118", "the bed G1 X110 Y70 E15 F1200.000 ; extrude a", "But, I would really like to start using a newer", "B0 ; set all coords to 0 for now G1", "sense G1 X110 Y-70 Z0.2 F2400.0 ; move to just", "motor Vref to defaults ; let the Z stepper vref", "eeprom home position T0 ; home on the right nozzle", "is relative to this 0 ; ; Sliced at: {day}", "their start and end G-code for this particular printer. The", "this particular printer. The only catch is that his code", "I have upgraded the power supply and added a heated", "F2400.0 ; move to just on the bed G1 X110", "on the bed G1 X110 Y70 E15 F1200.000 ; extrude", "; Sliced at: {day} {date} {time} ; Basic settings: Layer", "newer version like 2.5 or anything relatively new. Here is", "recall stored home offsets for XYZ axes ; ; wait", "fed up with MakerBot software, I've started using Cura to", "filament along the right edge of the bed G92 E0", "I did a lot of searching and finally found someone", "level (probably 40) ; ; home and recall eeprom home", "to 0 again because the slicer's next extrusion is relative", "I've started using Cura to slice then post process with", "in post processing. Any help is appreciated!! ``` ; --", "; move to just on the bed G1 X110 Y70", "and recall eeprom home position T0 ; home on the", "switch G161 Z F100 ; home Z slowly M132 X", "compared to MakerWare. But, I would really like to start", "version 15.04. Don't get me wrong, 15.04 is a huge", "software, I've started using Cura to slice then post process", "P0 G90 ; absolute coordinates ; ; set temperatures and", "I have a Monoprice architect which is a barebones clone", "help is appreciated!! ``` ; -- START GCODE -- M136", "position as 0 so that E15 below makes sense G1", "like 2.5 or anything relatively new. Here is the start", "stepper motor Vref to defaults ; let the Z stepper", "a lot of searching and finally found someone who posted", "along the right edge of the bed G92 E0 ;", "; wait for temps ; ; purge and wipe G92", "with error in post processing. Any help is appreciated!! ```", "; move Z 5mm away so we can carefully hit", "S{print_temperature} T0 G130 X118 Y118 A118 B118 ; set stepper", "Z ; home all axes at homing speed G92 X0", "new. Here is the start code I found. I have", "X0 Y0 Z0 A0 B0 ; set all coords to", "home offsets for XYZ axes ; ; wait for heat", "start build M73 P0 G90 ; absolute coordinates ; ;", "heated bed and, after getting fed up with MakerBot software,", "it in 2.5 with error in post processing. Any help", "home position T0 ; home on the right nozzle G28", "absolute coordinates ; ; set temperatures and assert Vref M140", "stay at eeprom level (probably 40) ; ; home and", "supply and added a heated bed and, after getting fed", "move Z 5mm away so we can carefully hit the", "Pro, or Replicator 1 Dual. I have upgraded the power", "someone who posted their start and end G-code for this", "power supply and added a heated bed and, after getting", "X110 Y70 E15 F1200.000 ; extrude a line of filament", "2.5 with error in post processing. Any help is appreciated!!", "for temps ; ; purge and wipe G92 E0 ;", "so that E15 below makes sense G1 X110 Y-70 Z0.2", "E15 below makes sense G1 X110 Y-70 Z0.2 F2400.0 ;", "post process with GPX. I did a lot of searching", "added a heated bed and, after getting fed up with", "START GCODE -- M136 ; start build M73 P0 G90", "slicer's next extrusion is relative to this 0 ; ;", "is a barebones clone of the FlashForge Creator Pro, or", "have upgraded the power supply and added a heated bed", "speed G92 X0 Y0 Z0 A0 B0 ; set all", "that his code only works on version 15.04. Don't get", "a Monoprice architect which is a barebones clone of the" ]
[ "Is this a known problem of Cura or is something", "this a known problem of Cura or is something else", "printer minimal dimension of 0.7 mm. Is this a known", "I got a life size model of a signaling post", "of a signaling post (trains) where I scale it down", "their dimensions exceed the printer minimal dimension of 0.7 mm.", "dimensions exceed the printer minimal dimension of 0.7 mm. Is", "model to my 3D printer (with Cura 2.4) some parts", "the model to my 3D printer (with Cura 2.4) some", "my 3D printer (with Cura 2.4) some parts of the", "Cura 2.4) some parts of the model are lost in", "mm. Is this a known problem of Cura or is", "signaling post (trains) where I scale it down to 1/87", "a known problem of Cura or is something else at", "send the model to my 3D printer (with Cura 2.4)", "I send the model to my 3D printer (with Cura", "got a life size model of a signaling post (trains)", "exceed the printer minimal dimension of 0.7 mm. Is this", "when their dimensions exceed the printer minimal dimension of 0.7", "(with Cura 2.4) some parts of the model are lost", "a signaling post (trains) where I scale it down to", "translation even when their dimensions exceed the printer minimal dimension", "known problem of Cura or is something else at hand?", "dimension of 0.7 mm. Is this a known problem of", "(trains) where I scale it down to 1/87 model (in", "post (trains) where I scale it down to 1/87 model", "even when their dimensions exceed the printer minimal dimension of", "it down to 1/87 model (in SketchUp). When I send", "a life size model of a signaling post (trains) where", "in translation even when their dimensions exceed the printer minimal", "0.7 mm. Is this a known problem of Cura or", "life size model of a signaling post (trains) where I", "SketchUp). When I send the model to my 3D printer", "some parts of the model are lost in translation even", "of the model are lost in translation even when their", "When I send the model to my 3D printer (with", "model are lost in translation even when their dimensions exceed", "(in SketchUp). When I send the model to my 3D", "size model of a signaling post (trains) where I scale", "I scale it down to 1/87 model (in SketchUp). When", "model (in SketchUp). When I send the model to my", "to 1/87 model (in SketchUp). When I send the model", "3D printer (with Cura 2.4) some parts of the model", "are lost in translation even when their dimensions exceed the", "model of a signaling post (trains) where I scale it", "down to 1/87 model (in SketchUp). When I send the", "parts of the model are lost in translation even when", "scale it down to 1/87 model (in SketchUp). When I", "the printer minimal dimension of 0.7 mm. Is this a", "printer (with Cura 2.4) some parts of the model are", "of 0.7 mm. Is this a known problem of Cura", "1/87 model (in SketchUp). When I send the model to", "minimal dimension of 0.7 mm. Is this a known problem", "lost in translation even when their dimensions exceed the printer", "to my 3D printer (with Cura 2.4) some parts of", "the model are lost in translation even when their dimensions", "where I scale it down to 1/87 model (in SketchUp).", "2.4) some parts of the model are lost in translation" ]
[ "getting clogs and believe that it may be due to", "the original PTFE tube around, and I can't get the", "get the other end to fit into the nozzle either.", "due to a damaged PTFE tube inside my hot end.", "can't get the other end to fit into the nozzle", "(it came with my printer), but I can't seem to", "been getting clogs and believe that it may be due", "can't seem to fit the tube into the nozzle. I", "clogs and believe that it may be due to a", "and I can't get the other end to fit into", "also tried to turn the original PTFE tube around, and", "end to fit into the nozzle either. Is there a", "original PTFE tube around, and I can't get the other", "have a replacement (it came with my printer), but I", "believe that it may be due to a damaged PTFE", "to a damaged PTFE tube inside my hot end. I", "a replacement (it came with my printer), but I can't", "it may be due to a damaged PTFE tube inside", "came with my printer), but I can't seem to fit", "tube into the nozzle. I also tried to turn the", "seem to fit the tube into the nozzle. I also", "other end to fit into the nozzle either. Is there", "turn the original PTFE tube around, and I can't get", "may be due to a damaged PTFE tube inside my", "end. I have a replacement (it came with my printer),", "fit into the nozzle either. Is there a trick to", "I have been getting clogs and believe that it may", "my printer), but I can't seem to fit the tube", "a damaged PTFE tube inside my hot end. I have", "printer), but I can't seem to fit the tube into", "nozzle. I also tried to turn the original PTFE tube", "hot end. I have a replacement (it came with my", "the nozzle. I also tried to turn the original PTFE", "into the nozzle either. Is there a trick to it?", "and believe that it may be due to a damaged", "fit the tube into the nozzle. I also tried to", "PTFE tube around, and I can't get the other end", "PTFE tube inside my hot end. I have a replacement", "the tube into the nozzle. I also tried to turn", "to fit the tube into the nozzle. I also tried", "replacement (it came with my printer), but I can't seem", "tried to turn the original PTFE tube around, and I", "tube around, and I can't get the other end to", "with my printer), but I can't seem to fit the", "to fit into the nozzle either. Is there a trick", "have been getting clogs and believe that it may be", "I also tried to turn the original PTFE tube around,", "the other end to fit into the nozzle either. Is", "into the nozzle. I also tried to turn the original", "damaged PTFE tube inside my hot end. I have a", "that it may be due to a damaged PTFE tube", "inside my hot end. I have a replacement (it came", "tube inside my hot end. I have a replacement (it", "my hot end. I have a replacement (it came with", "I have a replacement (it came with my printer), but", "but I can't seem to fit the tube into the", "around, and I can't get the other end to fit", "to turn the original PTFE tube around, and I can't", "I can't get the other end to fit into the", "I can't seem to fit the tube into the nozzle.", "be due to a damaged PTFE tube inside my hot" ]
[ "do manual leveling (sheet of paper to set gap). What", "Cura 2.4. I print on glass and do manual leveling", "What could be causing this? It almost looks like a", "and do manual leveling (sheet of paper to set gap).", "raft; but, I selected to print with a Brim not", "setting. Note: Bed adhesion seemed great. First adhered well and", "set gap). What could be causing this? It almost looks", "frame clone) using eSun PLA+ and sliced using Cura 2.4.", "a slicer setting. Note: Bed adhesion seemed great. First adhered", "I printed [Planetary Gears](https://www.thingiverse.com/thing:53451) and the top looks great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but", "on glass and do manual leveling (sheet of paper to", "and the top looks great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I", "other prints so I suspect it is a slicer setting.", "metal frame clone) using eSun PLA+ and sliced using Cura", "slicer setting. Note: Bed adhesion seemed great. First adhered well", "(Prusa i3 metal frame clone) using eSun PLA+ and sliced", "great. First adhered well and part popped off with very", "top looks great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am printing", "could be causing this? It almost looks like a raft;", "Gears](https://www.thingiverse.com/thing:53451) and the top looks great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg)", "doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am printing on a TronXY X3 (Prusa i3", "is a slicer setting. Note: Bed adhesion seemed great. First", "it is a slicer setting. Note: Bed adhesion seemed great.", "eSun PLA+ and sliced using Cura 2.4. I print on", "have seen this on some other prints so I suspect", "not a Raft. I have seen this on some other", "It almost looks like a raft; but, I selected to", "sliced using Cura 2.4. I print on glass and do", "Bed adhesion seemed great. First adhered well and part popped", "a TronXY X3 (Prusa i3 metal frame clone) using eSun", "print with a Brim not a Raft. I have seen", "and sliced using Cura 2.4. I print on glass and", "but the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am printing on a TronXY", "X3 (Prusa i3 metal frame clone) using eSun PLA+ and", "almost looks like a raft; but, I selected to print", "Brim not a Raft. I have seen this on some", "adhesion seemed great. First adhered well and part popped off", "am printing on a TronXY X3 (Prusa i3 metal frame", "to print with a Brim not a Raft. I have", "so I suspect it is a slicer setting. Note: Bed", "2.4. I print on glass and do manual leveling (sheet", "TronXY X3 (Prusa i3 metal frame clone) using eSun PLA+", "using Cura 2.4. I print on glass and do manual", "on some other prints so I suspect it is a", "selected to print with a Brim not a Raft. I", "suspect it is a slicer setting. Note: Bed adhesion seemed", "a Brim not a Raft. I have seen this on", "I am printing on a TronXY X3 (Prusa i3 metal", "gap). What could be causing this? It almost looks like", "glass and do manual leveling (sheet of paper to set", "seemed great. First adhered well and part popped off with", "but, I selected to print with a Brim not a", "leveling (sheet of paper to set gap). What could be", "printing on a TronXY X3 (Prusa i3 metal frame clone)", "manual leveling (sheet of paper to set gap). What could", "to set gap). What could be causing this? It almost", "i3 metal frame clone) using eSun PLA+ and sliced using", "seen this on some other prints so I suspect it", "looks like a raft; but, I selected to print with", "I selected to print with a Brim not a Raft.", "a raft; but, I selected to print with a Brim", "some other prints so I suspect it is a slicer", "bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am printing on a TronXY X3 (Prusa", "like a raft; but, I selected to print with a", "this on some other prints so I suspect it is", "paper to set gap). What could be causing this? It", "great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am printing on a", "the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am printing on a TronXY X3", "prints so I suspect it is a slicer setting. Note:", "using eSun PLA+ and sliced using Cura 2.4. I print", "Raft. I have seen this on some other prints so", "with a Brim not a Raft. I have seen this", "of paper to set gap). What could be causing this?", "[Planetary Gears](https://www.thingiverse.com/thing:53451) and the top looks great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but the bottom", "on a TronXY X3 (Prusa i3 metal frame clone) using", "printed [Planetary Gears](https://www.thingiverse.com/thing:53451) and the top looks great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but the", "PLA+ and sliced using Cura 2.4. I print on glass", "be causing this? It almost looks like a raft; but,", "I suspect it is a slicer setting. Note: Bed adhesion", "First adhered well and part popped off with very little", "adhered well and part popped off with very little effort.", "print on glass and do manual leveling (sheet of paper", "clone) using eSun PLA+ and sliced using Cura 2.4. I", "causing this? It almost looks like a raft; but, I", "Note: Bed adhesion seemed great. First adhered well and part", "(sheet of paper to set gap). What could be causing", "the top looks great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am", "a Raft. I have seen this on some other prints", "I have seen this on some other prints so I", "I print on glass and do manual leveling (sheet of", "looks great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am printing on", "this? It almost looks like a raft; but, I selected" ]
[ "I have an STL file from thingiverse. The model is", "description, the creator explained that he simply switched the material", "print it using two different colors, so that the engraving", "than the lid base. In the model description, the creator", "lid with an engraving. I would like to print it", "the model description, the creator explained that he simply switched", "like to print it using two different colors, so that", "it using two different colors, so that the engraving would", "I have a two-extruder printer, and I'd like to utilize", "However, I have a two-extruder printer, and I'd like to", "STL file from thingiverse. The model is of a rectangular", "What's the easiest way (tool) to select a part of", "that he simply switched the material mid printing. However, I", "rectangular lid with an engraving. I would like to print", "it for this printing. What's the easiest way (tool) to", "printing. However, I have a two-extruder printer, and I'd like", "of a rectangular lid with an engraving. I would like", "for this printing. What's the easiest way (tool) to select", "different color than the lid base. In the model description,", "In the model description, the creator explained that he simply", "I would like to print it using two different colors,", "the model and define that it should be printed using", "using two different colors, so that the engraving would be", "to utilize it for this printing. What's the easiest way", "the easiest way (tool) to select a part of the", "model and define that it should be printed using a", "easiest way (tool) to select a part of the model", "creator explained that he simply switched the material mid printing.", "this printing. What's the easiest way (tool) to select a", "of the model and define that it should be printed", "different colors, so that the engraving would be in a", "that the engraving would be in a different color than", "printing. What's the easiest way (tool) to select a part", "have a two-extruder printer, and I'd like to utilize it", "the creator explained that he simply switched the material mid", "base. In the model description, the creator explained that he", "material mid printing. However, I have a two-extruder printer, and", "I'd like to utilize it for this printing. What's the", "a rectangular lid with an engraving. I would like to", "be in a different color than the lid base. In", "two different colors, so that the engraving would be in", "color than the lid base. In the model description, the", "the engraving would be in a different color than the", "colors, so that the engraving would be in a different", "have an STL file from thingiverse. The model is of", "to select a part of the model and define that", "switched the material mid printing. However, I have a two-extruder", "The model is of a rectangular lid with an engraving.", "explained that he simply switched the material mid printing. However,", "simply switched the material mid printing. However, I have a", "mid printing. However, I have a two-extruder printer, and I'd", "the lid base. In the model description, the creator explained", "printer, and I'd like to utilize it for this printing.", "a part of the model and define that it should", "an engraving. I would like to print it using two", "way (tool) to select a part of the model and", "utilize it for this printing. What's the easiest way (tool)", "an STL file from thingiverse. The model is of a", "like to utilize it for this printing. What's the easiest", "with an engraving. I would like to print it using", "a different color than the lid base. In the model", "thingiverse. The model is of a rectangular lid with an", "would like to print it using two different colors, so", "define that it should be printed using a different color?", "engraving. I would like to print it using two different", "is of a rectangular lid with an engraving. I would", "engraving would be in a different color than the lid", "part of the model and define that it should be", "would be in a different color than the lid base.", "and I'd like to utilize it for this printing. What's", "lid base. In the model description, the creator explained that", "model is of a rectangular lid with an engraving. I", "(tool) to select a part of the model and define", "to print it using two different colors, so that the", "the material mid printing. However, I have a two-extruder printer,", "in a different color than the lid base. In the", "file from thingiverse. The model is of a rectangular lid", "so that the engraving would be in a different color", "and define that it should be printed using a different", "from thingiverse. The model is of a rectangular lid with", "two-extruder printer, and I'd like to utilize it for this", "a two-extruder printer, and I'd like to utilize it for", "model description, the creator explained that he simply switched the", "he simply switched the material mid printing. However, I have", "select a part of the model and define that it" ]
[ "filament back, for a small interval of time. I have", "small interval of time. I have tried changing the nozzle", "problem? This is the 3D printer: [Geeetech High Quality Wood", "nozzle temperature and I'm unable to work this out alone.", "time. I have tried changing the nozzle temperature and I'm", "have tried changing the nozzle temperature and I'm unable to", "sound and it goes backwards, pushing the filament back, for", "extruder motor makes a \"tac tac\" sound and it goes", "to work this out alone. Has someone had the same", "at >75% printing speed the extruder motor makes a \"tac", "same problem? This is the 3D printer: [Geeetech High Quality", "tried changing the nozzle temperature and I'm unable to work", "it's at >75% printing speed the extruder motor makes a", "work this out alone. Has someone had the same problem?", "High Quality Wood Geeetech Prusa I3 Pro W 3D Printer", "the filament back, for a small interval of time. I", "interval of time. I have tried changing the nozzle temperature", "speed the extruder motor makes a \"tac tac\" sound and", "3D printer: [Geeetech High Quality Wood Geeetech Prusa I3 Pro", "out alone. Has someone had the same problem? This is", "goes backwards, pushing the filament back, for a small interval", "back, for a small interval of time. I have tried", "is the 3D printer: [Geeetech High Quality Wood Geeetech Prusa", "printing speed the extruder motor makes a \"tac tac\" sound", "makes a \"tac tac\" sound and it goes backwards, pushing", "backwards, pushing the filament back, for a small interval of", "of time. I have tried changing the nozzle temperature and", "My 3D printer makes weird sounds. When it's at >75%", "This is the 3D printer: [Geeetech High Quality Wood Geeetech", "someone had the same problem? This is the 3D printer:", "the extruder motor makes a \"tac tac\" sound and it", "motor makes a \"tac tac\" sound and it goes backwards,", "changing the nozzle temperature and I'm unable to work this", "a small interval of time. I have tried changing the", "and I'm unable to work this out alone. Has someone", "tac\" sound and it goes backwards, pushing the filament back,", "I'm unable to work this out alone. Has someone had", "printer makes weird sounds. When it's at >75% printing speed", ">75% printing speed the extruder motor makes a \"tac tac\"", "I have tried changing the nozzle temperature and I'm unable", "alone. Has someone had the same problem? This is the", "the same problem? This is the 3D printer: [Geeetech High", "makes weird sounds. When it's at >75% printing speed the", "the 3D printer: [Geeetech High Quality Wood Geeetech Prusa I3", "\"tac tac\" sound and it goes backwards, pushing the filament", "temperature and I'm unable to work this out alone. Has", "[Geeetech High Quality Wood Geeetech Prusa I3 Pro W 3D", "this out alone. Has someone had the same problem? This", "had the same problem? This is the 3D printer: [Geeetech", "it goes backwards, pushing the filament back, for a small", "weird sounds. When it's at >75% printing speed the extruder", "printer: [Geeetech High Quality Wood Geeetech Prusa I3 Pro W", "and it goes backwards, pushing the filament back, for a", "unable to work this out alone. Has someone had the", "Quality Wood Geeetech Prusa I3 Pro W 3D Printer Kit](http://www.dx.com/es/p/geeetech-high-quality-wood-geeetech-prusa-i3-pro-w-3d-printer-kit-469707?tc=EUR).", "a \"tac tac\" sound and it goes backwards, pushing the", "pushing the filament back, for a small interval of time.", "sounds. When it's at >75% printing speed the extruder motor", "the nozzle temperature and I'm unable to work this out", "When it's at >75% printing speed the extruder motor makes", "for a small interval of time. I have tried changing", "3D printer makes weird sounds. When it's at >75% printing", "Has someone had the same problem? This is the 3D" ]
[ "gone through quite a few testing cubes each with some", "top, they hardly withstand any pressure. I have gone through", "Init. Layer Height: 0.10 mm Wall Line Count: 2 Top", "Plate Temperature: 60 °C Retraction: Enabled, Distance: 2 mm, Speed:", "°C Retraction: Enabled, Distance: 2 mm, Speed: 60 mm/s Speeds:", "many test cubes with each cube having some settings tweaked):", "I can't figure out what I am doing wrong. I", "infill is shaped like many tiny pillars. They are super", "down the infill didn't help either. Neither did increasing flow", "20 % Printing Temperature: 200 °C Build Plate Temperature: 60", "Temperature: 200 °C Build Plate Temperature: 60 °C Retraction: Enabled,", "the newest Cura to work. I copied all the settings", "infill didn't help either. Neither did increasing flow rate or", "test cubes with each cube having some settings tweaked): ```", "seems like I just can't get the infill in the", "did increasing flow rate or switching to triangular infill pattern.", "it seems like I just can't get the infill in", "problem but I can't figure out what I am doing", "Neither did increasing flow rate or switching to triangular infill", "work. I copied all the settings from my Wanhao branded", "Lines Infill Overlap Percentage: 20 % Printing Temperature: 200 °C", "on top, they hardly withstand any pressure. I have gone", "I have created many test cubes with each cube having", "50mm/s and it still failed. My standard settings (from which", "standard settings* (from which I have created many test cubes", "Cura) Infill Pattern: Lines Infill Overlap Percentage: 20 % Printing", "the settings from my Wanhao branded Cura version and printed", "am doing wrong. I have a Wanhao duplicator i3 (Prusa", "to triangular infill pattern. Also I have tried printing with", "make use of the improved supports in the new Cura.", "Speeds: Print:60 mm/s, Infill: 60 mm/s, Outer Wall: 30 mm/s,", "Infill Line distance: 5 mm (used to be 20 %", "Pattern: Lines Infill Overlap Percentage: 20 % Printing Temperature: 200", "Wanhao duplicator i3 (Prusa i3 clone) and until recently I", "I wanted to make use of the improved supports in", "Cura. Unfortunately it seems like I just can't get the", "old Cura in between (and not only once). Increasing temperature", "°C Build Plate Temperature: 60 °C Retraction: Enabled, Distance: 2", "Increasing temperature or slowing down the infill didn't help either.", "duplicator i3 (Prusa i3 clone) and until recently I used", "what I am doing wrong. I have a Wanhao duplicator", "slicer. But it's quite an old Cura version and I", "Wall: 30 mm/s, Inner Wall: 60 mm/s, Top/Bottom: 40 mm/s,", "Cura in between (and not only once). Increasing temperature or", "or switching to triangular infill pattern. Also I have tried", "testing cubes each with some setting altered, but nothing seemed", "0.10 mm Wall Line Count: 2 Top Layers: 6 Bottom", "the new Cura) Infill Pattern: Lines Infill Overlap Percentage: 20", "cube having some settings tweaked): ``` Layer Height: 0.12 mm", "mm (used to be 20 % in old Cura, but", "Percentage: 20 % Printing Temperature: 200 °C Build Plate Temperature:", "tiny pillars. They are super fragile and while they do", "mm/s, Outer Wall: 30 mm/s, Inner Wall: 60 mm/s, Top/Bottom:", "version and printed the same file. This is the result:", "and while they do support material to be printed on", "Layer Height: 0.10 mm Wall Line Count: 2 Top Layers:", "few testing cubes each with some setting altered, but nothing", "in the new Cura) Infill Pattern: Lines Infill Overlap Percentage:", "supports in the new Cura. Unfortunately it seems like I", "mm, Speed: 60 mm/s Speeds: Print:60 mm/s, Infill: 60 mm/s,", "and printed the same file. This is the result: [![Infill", "they do support material to be printed on top, they", "6 Bottom Layers: 4 Infill Line distance: 5 mm (used", "flow rate or switching to triangular infill pattern. Also I", "cubes sliced with the old Cura in between (and not", "and it still failed. My standard settings (from which I", "result:* [![Infill of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill is shaped like", "2 Top Layers: 6 Bottom Layers: 4 Infill Line distance:", "figure out what I am doing wrong. I have a", "recently I used Wanhao's adapted version of the Cura slicer.", "created many test cubes with each cube having some settings", "to make use of the improved supports in the new", "Also I have tried printing with all speeds set to", "is very dense in the new Cura) Infill Pattern: Lines", "I just can't get the infill in the newest Cura", "Distance: 2 mm, Speed: 60 mm/s Speeds: Print:60 mm/s, Infill:", "in between (and not only once). Increasing temperature or slowing", "printed test cubes sliced with the old Cura in between", "pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill is shaped like many tiny pillars. They", "new Cura. Unfortunately it seems like I just can't get", "while they do support material to be printed on top,", "help either. Neither did increasing flow rate or switching to", "file. This is the result: [![Infill of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The", "``` Layer Height: 0.12 mm Init. Layer Height: 0.10 mm", "(Prusa i3 clone) and until recently I used Wanhao's adapted", "test cubes sliced with the old Cura in between (and", "Retraction: Enabled, Distance: 2 mm, Speed: 60 mm/s Speeds: Print:60", "60 °C Retraction: Enabled, Distance: 2 mm, Speed: 60 mm/s", "this problem but I can't figure out what I am", "The infill is shaped like many tiny pillars. They are", "once). Increasing temperature or slowing down the infill didn't help", "out what I am doing wrong. I have a Wanhao", "I have a Wanhao duplicator i3 (Prusa i3 clone) and", "through quite a few testing cubes each with some setting", "to 50mm/s and it still failed. My standard settings (from", "the infill didn't help either. Neither did increasing flow rate", "a few testing cubes each with some setting altered, but", "printing with all speeds set to 50mm/s and it still", "the old Cura in between (and not only once). Increasing", "mm Wall Line Count: 2 Top Layers: 6 Bottom Layers:", "Overlap Percentage: 20 % Printing Temperature: 200 °C Build Plate", "an old Cura version and I wanted to make use", "Speed: 60 mm/s Speeds: Print:60 mm/s, Infill: 60 mm/s, Outer", "cubes with each cube having some settings tweaked): ``` Layer", "fragile and while they do support material to be printed", "some setting altered, but nothing seemed to help. It can't", "5 mm (used to be 20 % in old Cura,", "Outer Wall: 30 mm/s, Inner Wall: 60 mm/s, Top/Bottom: 40", "tried printing with all speeds set to 50mm/s and it", "adapted version of the Cura slicer. But it's quite an", "Height: 0.10 mm Wall Line Count: 2 Top Layers: 6", "fault as I have successfully printed test cubes sliced with", "Top/Bottom: 40 mm/s, Travel: 100 mm/s, Initial Layer: 20 mm/s", "or slowing down the infill didn't help either. Neither did", "either. Neither did increasing flow rate or switching to triangular", "used Wanhao's adapted version of the Cura slicer. But it's", "Layers: 4 Infill Line distance: 5 mm (used to be", "of the improved supports in the new Cura. Unfortunately it", "support material to be printed on top, they hardly withstand", "I have spent ages debugging this problem but I can't", "distance: 5 mm (used to be 20 % in old", "100 mm/s, Initial Layer: 20 mm/s Combing Mode: All ```", "mm/s, Travel: 100 mm/s, Initial Layer: 20 mm/s Combing Mode:", "newest Cura to work. I copied all the settings from", "of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill is shaped like many tiny", "super fragile and while they do support material to be", "I have gone through quite a few testing cubes each", "do support material to be printed on top, they hardly", "mm/s, Top/Bottom: 40 mm/s, Travel: 100 mm/s, Initial Layer: 20", "Temperature: 60 °C Retraction: Enabled, Distance: 2 mm, Speed: 60", "% Printing Temperature: 200 °C Build Plate Temperature: 60 °C", "infill pattern. Also I have tried printing with all speeds", "Wall: 60 mm/s, Top/Bottom: 40 mm/s, Travel: 100 mm/s, Initial", "debugging this problem but I can't figure out what I", "wrong. I have a Wanhao duplicator i3 (Prusa i3 clone)", "this is very dense in the new Cura) Infill Pattern:", "printed on top, they hardly withstand any pressure. I have", "Count: 2 Top Layers: 6 Bottom Layers: 4 Infill Line", "it's quite an old Cura version and I wanted to", "Cura version and printed the same file. *This is the", "to be 20 % in old Cura, but this is", "Enabled, Distance: 2 mm, Speed: 60 mm/s Speeds: Print:60 mm/s,", "60 mm/s, Top/Bottom: 40 mm/s, Travel: 100 mm/s, Initial Layer:", "material to be printed on top, they hardly withstand any", "can't figure out what I am doing wrong. I have", "It can't be the printers fault as I have successfully", "pillars. They are super fragile and while they do support", "each cube having some settings tweaked): ``` Layer Height: 0.12", "Layers: 6 Bottom Layers: 4 Infill Line distance: 5 mm", "Inner Wall: 60 mm/s, Top/Bottom: 40 mm/s, Travel: 100 mm/s,", "but I can't figure out what I am doing wrong.", "help. It can't be the printers fault as I have", "slowing down the infill didn't help either. Neither did increasing", "4 Infill Line distance: 5 mm (used to be 20", "many tiny pillars. They are super fragile and while they", "like I just can't get the infill in the newest", "improved supports in the new Cura. Unfortunately it seems like", "very dense in the new Cura) Infill Pattern: Lines Infill", "60 mm/s, Outer Wall: 30 mm/s, Inner Wall: 60 mm/s,", "Printing Temperature: 200 °C Build Plate Temperature: 60 °C Retraction:", "(and not only once). Increasing temperature or slowing down the", "until recently I used Wanhao's adapted version of the Cura", "the improved supports in the new Cura. Unfortunately it seems", "I used Wanhao's adapted version of the Cura slicer. But", "spent ages debugging this problem but I can't figure out", "i3 clone) and until recently I used Wanhao's adapted version", "have tried printing with all speeds set to 50mm/s and", "like many tiny pillars. They are super fragile and while", "new Cura) Infill Pattern: Lines Infill Overlap Percentage: 20 %", "have spent ages debugging this problem but I can't figure", "I have successfully printed test cubes sliced with the old", "0.12 mm Init. Layer Height: 0.10 mm Wall Line Count:", "Cura, but this is very dense in the new Cura)", "Infill: 60 mm/s, Outer Wall: 30 mm/s, Inner Wall: 60", "Wanhao branded Cura version and printed the same file. This", "wanted to make use of the improved supports in the", "only once). Increasing temperature or slowing down the infill didn't", "use of the improved supports in the new Cura. Unfortunately", "copied all the settings from my Wanhao branded Cura version", "get the infill in the newest Cura to work. I", "just can't get the infill in the newest Cura to", "the infill in the newest Cura to work. I copied", "which I have created many test cubes with each cube", "Travel: 100 mm/s, Initial Layer: 20 mm/s Combing Mode: All", "ages debugging this problem but I can't figure out what", "They are super fragile and while they do support material", "old Cura version and I wanted to make use of", "version of the Cura slicer. But it's quite an old", "mm/s Speeds: Print:60 mm/s, Infill: 60 mm/s, Outer Wall: 30", "infill in the newest Cura to work. I copied all", "Wanhao's adapted version of the Cura slicer. But it's quite", "have created many test cubes with each cube having some", "have a Wanhao duplicator i3 (Prusa i3 clone) and until", "shaped like many tiny pillars. They are super fragile and", "clone) and until recently I used Wanhao's adapted version of", "same file. This is the result: [![Infill of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg)", "printed the same file. This is the result: [![Infill of", "the same file. This is the result: [![Infill of tiny", "with some setting altered, but nothing seemed to help. It", "the new Cura. Unfortunately it seems like I just can't", "30 mm/s, Inner Wall: 60 mm/s, Top/Bottom: 40 mm/s, Travel:", "settings from my Wanhao branded Cura version and printed the", "quite a few testing cubes each with some setting altered,", "all speeds set to 50mm/s and it still failed. My", "increasing flow rate or switching to triangular infill pattern. Also", "(from which I have created many test cubes with each", "i3 (Prusa i3 clone) and until recently I used Wanhao's", "to work. I copied all the settings from my Wanhao", "mm/s, Inner Wall: 60 mm/s, Top/Bottom: 40 mm/s, Travel: 100", "can't get the infill in the newest Cura to work.", "didn't help either. Neither did increasing flow rate or switching", "tweaked): ``` Layer Height: 0.12 mm Init. Layer Height: 0.10", "Infill Pattern: Lines Infill Overlap Percentage: 20 % Printing Temperature:", "have gone through quite a few testing cubes each with", "seemed to help. It can't be the printers fault as", "are super fragile and while they do support material to", "they hardly withstand any pressure. I have gone through quite", "be 20 % in old Cura, but this is very", "doing wrong. I have a Wanhao duplicator i3 (Prusa i3", "40 mm/s, Travel: 100 mm/s, Initial Layer: 20 mm/s Combing", "I am doing wrong. I have a Wanhao duplicator i3", "This is the result: [![Infill of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill", "set to 50mm/s and it still failed. My standard settings", "[![Infill of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill is shaped like many", "with the old Cura in between (and not only once).", "and I wanted to make use of the improved supports", "mm Init. Layer Height: 0.10 mm Wall Line Count: 2", "is shaped like many tiny pillars. They are super fragile", "my Wanhao branded Cura version and printed the same file.", "pressure. I have gone through quite a few testing cubes", "with each cube having some settings tweaked): ``` Layer Height:", "200 °C Build Plate Temperature: 60 °C Retraction: Enabled, Distance:", "Cura version and I wanted to make use of the", "have successfully printed test cubes sliced with the old Cura", "altered, but nothing seemed to help. It can't be the", "with all speeds set to 50mm/s and it still failed.", "I copied all the settings from my Wanhao branded Cura", "branded Cura version and printed the same file. This is", "but nothing seemed to help. It can't be the printers", "switching to triangular infill pattern. Also I have tried printing", "rate or switching to triangular infill pattern. Also I have", "the printers fault as I have successfully printed test cubes", "a Wanhao duplicator i3 (Prusa i3 clone) and until recently", "setting altered, but nothing seemed to help. It can't be", "Print:60 mm/s, Infill: 60 mm/s, Outer Wall: 30 mm/s, Inner", "Cura to work. I copied all the settings from my", "speeds set to 50mm/s and it still failed. My standard", "having some settings tweaked): ``` Layer Height: 0.12 mm Init.", "settings tweaked): ``` Layer Height: 0.12 mm Init. Layer Height:", "of the Cura slicer. But it's quite an old Cura", "it still failed. My standard settings* (from which I have", "I have tried printing with all speeds set to 50mm/s", "triangular infill pattern. Also I have tried printing with all", "Cura slicer. But it's quite an old Cura version and", "Wall Line Count: 2 Top Layers: 6 Bottom Layers: 4", "failed. My standard settings* (from which I have created many", "to be printed on top, they hardly withstand any pressure.", "the Cura slicer. But it's quite an old Cura version", "and until recently I used Wanhao's adapted version of the", "successfully printed test cubes sliced with the old Cura in", "printers fault as I have successfully printed test cubes sliced", "temperature or slowing down the infill didn't help either. Neither", "nothing seemed to help. It can't be the printers fault", "cubes each with some setting altered, but nothing seemed to", "But it's quite an old Cura version and I wanted", "in the newest Cura to work. I copied all the", "but this is very dense in the new Cura) Infill", "Bottom Layers: 4 Infill Line distance: 5 mm (used to", "Layer Height: 0.12 mm Init. Layer Height: 0.10 mm Wall", "% in old Cura, but this is very dense in", "pattern. Also I have tried printing with all speeds set", "mm/s, Infill: 60 mm/s, Outer Wall: 30 mm/s, Inner Wall:", "version and I wanted to make use of the improved", "the result:* [![Infill of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill is shaped", "all the settings from my Wanhao branded Cura version and", "not only once). Increasing temperature or slowing down the infill", "can't be the printers fault as I have successfully printed", "2 mm, Speed: 60 mm/s Speeds: Print:60 mm/s, Infill: 60", "in old Cura, but this is very dense in the", "between (and not only once). Increasing temperature or slowing down", "60 mm/s Speeds: Print:60 mm/s, Infill: 60 mm/s, Outer Wall:", "each with some setting altered, but nothing seemed to help.", "in the new Cura. Unfortunately it seems like I just", "still failed. My standard settings (from which I have created", "tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill is shaped like many tiny pillars.", "is the result:* [![Infill of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill is", "to help. It can't be the printers fault as I", "quite an old Cura version and I wanted to make", "hardly withstand any pressure. I have gone through quite a", "sliced with the old Cura in between (and not only", "Height: 0.12 mm Init. Layer Height: 0.10 mm Wall Line", "Line distance: 5 mm (used to be 20 % in", "be printed on top, they hardly withstand any pressure. I", "Unfortunately it seems like I just can't get the infill", "Build Plate Temperature: 60 °C Retraction: Enabled, Distance: 2 mm,", "as I have successfully printed test cubes sliced with the", "20 % in old Cura, but this is very dense", "any pressure. I have gone through quite a few testing", "Top Layers: 6 Bottom Layers: 4 Infill Line distance: 5", "be the printers fault as I have successfully printed test", "dense in the new Cura) Infill Pattern: Lines Infill Overlap", "some settings tweaked): ``` Layer Height: 0.12 mm Init. Layer", "Line Count: 2 Top Layers: 6 Bottom Layers: 4 Infill", "withstand any pressure. I have gone through quite a few", "settings* (from which I have created many test cubes with", "Infill Overlap Percentage: 20 % Printing Temperature: 200 °C Build", "old Cura, but this is very dense in the new", "(used to be 20 % in old Cura, but this", "My standard settings* *(from which I have created many test", "from my Wanhao branded Cura version and printed the same" ]
[ "know of any reasonably cheap guides to build my own", "a huge undertaking. Does anyone know of any reasonably cheap", "of any reasonably cheap guides to build my own 3-D", "any reasonably cheap guides to build my own 3-D printer?", "Does anyone know of any reasonably cheap guides to build", "a 3-D printer is obviously a huge undertaking. Does anyone", "printer is obviously a huge undertaking. Does anyone know of", "huge undertaking. Does anyone know of any reasonably cheap guides", "is obviously a huge undertaking. Does anyone know of any", "anyone know of any reasonably cheap guides to build my", "undertaking. Does anyone know of any reasonably cheap guides to", "3-D printer is obviously a huge undertaking. Does anyone know", "obviously a huge undertaking. Does anyone know of any reasonably", "Building a 3-D printer is obviously a huge undertaking. Does" ]
[ "thick. Is this something I can do with a typical", "best (and cheapest) way to prototype (and maybe make a", "wondering what the best (and cheapest) way to prototype (and", "entire cart is about 2mm thick, so each half of", "candidate for what I want to make. I want to", "can do with a typical 3D printer? How would I", "a SD card in a custom shell. Now I can", "a good candidate for what I want to make. I", "image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's like a SD card in", "PCB (0.6mm-1mm). But I was wondering what the best (and", "was wondering if it is a good candidate for what", "as a thin PCB (0.6mm-1mm). But I was wondering what", "3D printing and I was wondering if it is a", "I was wondering if it is a good candidate for", "(and maybe make a small run production) the outer shell", "a custom shell. Now I can produce the inside as", "the shell would be at most ~0.6mm thick. Is this", "to make a custom game cartridge which looks like this:", "a small run production) the outer shell would be. The", "can produce the inside as a thin PCB (0.6mm-1mm). But", "so each half of the shell would be at most", "cartridge which looks like this: [![enter image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically", "looks like this: [![enter image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's like", "it's like a SD card in a custom shell. Now", "half of the shell would be at most ~0.6mm thick.", "to prototype (and maybe make a small run production) the", "prototype (and maybe make a small run production) the outer", "good candidate for what I want to make. I want", "The entire cart is about 2mm thick, so each half", "thin PCB (0.6mm-1mm). But I was wondering what the best", "production) the outer shell would be. The entire cart is", "a thin PCB (0.6mm-1mm). But I was wondering what the", "this something I can do with a typical 3D printer?", "a typical 3D printer? How would I \"attach\" the two", "about 2mm thick, so each half of the shell would", "Basically it's like a SD card in a custom shell.", "do with a typical 3D printer? How would I \"attach\"", "(0.6mm-1mm). But I was wondering what the best (and cheapest)", "run production) the outer shell would be. The entire cart", "the outer shell would be. The entire cart is about", "if it is a good candidate for what I want", "would be at most ~0.6mm thick. Is this something I", "make a small run production) the outer shell would be.", "like this: [![enter image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's like a", "But I was wondering what the best (and cheapest) way", "2mm thick, so each half of the shell would be", "each half of the shell would be at most ~0.6mm", "~0.6mm thick. Is this something I can do with a", "most ~0.6mm thick. Is this something I can do with", "Is this something I can do with a typical 3D", "custom game cartridge which looks like this: [![enter image description", "outer shell would be. The entire cart is about 2mm", "game cartridge which looks like this: [![enter image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg)", "is a good candidate for what I want to make.", "be. The entire cart is about 2mm thick, so each", "I can produce the inside as a thin PCB (0.6mm-1mm).", "at most ~0.6mm thick. Is this something I can do", "what the best (and cheapest) way to prototype (and maybe", "I want to make. I want to make a custom", "to make. I want to make a custom game cartridge", "is about 2mm thick, so each half of the shell", "custom shell. Now I can produce the inside as a", "cart is about 2mm thick, so each half of the", "a custom game cartridge which looks like this: [![enter image", "shell would be at most ~0.6mm thick. Is this something", "want to make a custom game cartridge which looks like", "the best (and cheapest) way to prototype (and maybe make", "what I want to make. I want to make a", "I was wondering what the best (and cheapest) way to", "with a typical 3D printer? How would I \"attach\" the", "like a SD card in a custom shell. Now I", "maybe make a small run production) the outer shell would", "for what I want to make. I want to make", "about 3D printing and I was wondering if it is", "want to make. I want to make a custom game", "inside as a thin PCB (0.6mm-1mm). But I was wondering", "printing and I was wondering if it is a good", "small run production) the outer shell would be. The entire", "make a custom game cartridge which looks like this: [![enter", "in a custom shell. Now I can produce the inside", "would be. The entire cart is about 2mm thick, so", "I can do with a typical 3D printer? How would", "I want to make a custom game cartridge which looks", "of the shell would be at most ~0.6mm thick. Is", "thick, so each half of the shell would be at", "and I was wondering if it is a good candidate", "be at most ~0.6mm thick. Is this something I can", "way to prototype (and maybe make a small run production)", "the inside as a thin PCB (0.6mm-1mm). But I was", "description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's like a SD card in a", "produce the inside as a thin PCB (0.6mm-1mm). But I", "here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's like a SD card in a custom", "card in a custom shell. Now I can produce the", "SD card in a custom shell. Now I can produce", "3D printer? How would I \"attach\" the two halves together?", "make. I want to make a custom game cartridge which", "was wondering what the best (and cheapest) way to prototype", "I know nothing about 3D printing and I was wondering", "nothing about 3D printing and I was wondering if it", "cheapest) way to prototype (and maybe make a small run", "wondering if it is a good candidate for what I", "Now I can produce the inside as a thin PCB", "something I can do with a typical 3D printer? How", "which looks like this: [![enter image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's", "know nothing about 3D printing and I was wondering if", "shell. Now I can produce the inside as a thin", "shell would be. The entire cart is about 2mm thick,", "typical 3D printer? How would I \"attach\" the two halves", "[![enter image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's like a SD card", "(and cheapest) way to prototype (and maybe make a small", "it is a good candidate for what I want to", "this: [![enter image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's like a SD" ]
[ "the resin tray but this Teflon coat wears over time.", "and trying to hone in my setting but my print", "as I know resin trays have a Teflon coat that", "know resin trays have a Teflon coat that allows prints", "tray but this Teflon coat wears over time. I am", "time. I am new to the SLA scene and am", "to the build plate easier than the resin tray but", "easier than the resin tray but this Teflon coat wears", "scene and am currently troubleshooting a Draken Facture and trying", "resin trays have a Teflon coat that allows prints to", "my setting but my print keep sticking to the bottom", "in my setting but my print keep sticking to the", "allows prints to stick to the build plate easier than", "than the resin tray but this Teflon coat wears over", "bottom of the resin vat. How often should these trays", "that allows prints to stick to the build plate easier", "I am new to the SLA scene and am currently", "troubleshooting a Draken Facture and trying to hone in my", "vat. How often should these trays be swapped out to", "resin tray but this Teflon coat wears over time. I", "I know resin trays have a Teflon coat that allows", "currently troubleshooting a Draken Facture and trying to hone in", "a Teflon coat that allows prints to stick to the", "this Teflon coat wears over time. I am new to", "coat wears over time. I am new to the SLA", "coat that allows prints to stick to the build plate", "prints to stick to the build plate easier than the", "the bottom of the resin vat. How often should these", "my print keep sticking to the bottom of the resin", "to the bottom of the resin vat. How often should", "often should these trays be swapped out to allow for", "but this Teflon coat wears over time. I am new", "setting but my print keep sticking to the bottom of", "over time. I am new to the SLA scene and", "wears over time. I am new to the SLA scene", "of the resin vat. How often should these trays be", "to stick to the build plate easier than the resin", "stick to the build plate easier than the resin tray", "plate easier than the resin tray but this Teflon coat", "hone in my setting but my print keep sticking to", "new to the SLA scene and am currently troubleshooting a", "Teflon coat that allows prints to stick to the build", "am new to the SLA scene and am currently troubleshooting", "Facture and trying to hone in my setting but my", "print keep sticking to the bottom of the resin vat.", "the resin vat. How often should these trays be swapped", "should these trays be swapped out to allow for smooth", "a Draken Facture and trying to hone in my setting", "SLA scene and am currently troubleshooting a Draken Facture and", "build plate easier than the resin tray but this Teflon", "but my print keep sticking to the bottom of the", "How often should these trays be swapped out to allow", "to hone in my setting but my print keep sticking", "the build plate easier than the resin tray but this", "am currently troubleshooting a Draken Facture and trying to hone", "sticking to the bottom of the resin vat. How often", "far as I know resin trays have a Teflon coat", "keep sticking to the bottom of the resin vat. How", "have a Teflon coat that allows prints to stick to", "Draken Facture and trying to hone in my setting but", "Teflon coat wears over time. I am new to the", "the SLA scene and am currently troubleshooting a Draken Facture", "resin vat. How often should these trays be swapped out", "these trays be swapped out to allow for smooth printing?", "trays have a Teflon coat that allows prints to stick", "As far as I know resin trays have a Teflon", "and am currently troubleshooting a Draken Facture and trying to", "trying to hone in my setting but my print keep", "to the SLA scene and am currently troubleshooting a Draken" ]
[ "sides. I want to cover the other two.[![enter image description", "exposed surface of my hot end. I thought the yellow", "surface of my hot end. I thought the yellow as", "the exposed surface of my hot end. I thought the", "the yellow as double-sticky but it appears to be Kapton.", "but it appears to be Kapton. What can I use", "it appears to be Kapton. What can I use to", "appears to be Kapton. What can I use to attach", "some heating block cotton to insulate the exposed surface of", "to the extruder? [![enter image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder is", "extruder? [![enter image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder is already covered", "can I use to attach it to the extruder? [![enter", "I thought the yellow as double-sticky but it appears to", "description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder is already covered on four sides.", "end. I thought the yellow as double-sticky but it appears", "of my hot end. I thought the yellow as double-sticky", "I bought some heating block cotton to insulate the exposed", "attach it to the extruder? [![enter image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My", "on four sides. I want to cover the other two.[![enter", "my hot end. I thought the yellow as double-sticky but", "block cotton to insulate the exposed surface of my hot", "here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder is already covered on four sides. I", "thought the yellow as double-sticky but it appears to be", "double-sticky but it appears to be Kapton. What can I", "as double-sticky but it appears to be Kapton. What can", "is already covered on four sides. I want to cover", "extruder is already covered on four sides. I want to", "the extruder? [![enter image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder is already", "already covered on four sides. I want to cover the", "to insulate the exposed surface of my hot end. I", "image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder is already covered on four", "bought some heating block cotton to insulate the exposed surface", "insulate the exposed surface of my hot end. I thought", "yellow as double-sticky but it appears to be Kapton. What", "to attach it to the extruder? [![enter image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg)", "use to attach it to the extruder? [![enter image description", "What can I use to attach it to the extruder?", "to be Kapton. What can I use to attach it", "I want to cover the other two.[![enter image description here](https://i.stack.imgur.com/VLyKX.png)](https://i.stack.imgur.com/VLyKX.png)", "it to the extruder? [![enter image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder", "covered on four sides. I want to cover the other", "cotton to insulate the exposed surface of my hot end.", "I use to attach it to the extruder? [![enter image", "hot end. I thought the yellow as double-sticky but it", "[![enter image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder is already covered on", "be Kapton. What can I use to attach it to", "Kapton. What can I use to attach it to the", "heating block cotton to insulate the exposed surface of my", "four sides. I want to cover the other two.[![enter image", "My extruder is already covered on four sides. I want" ]
[ "Yesterday i replaced the z axis of my diy printer.", "the threaded rods bent or could that be a vibration", "i have some strange waves on the side of my", "vibration issue? Or is the coupler too stiff? [![enter image", "or could that be a vibration issue? Or is the", "side of my prints. Are the threaded rods bent or", "i replaced the z axis of my diy printer. Now", "be a vibration issue? Or is the coupler too stiff?", "have some strange waves on the side of my prints.", "waves on the side of my prints. Are the threaded", "the z axis of my diy printer. Now i have", "prints. Are the threaded rods bent or could that be", "of my prints. Are the threaded rods bent or could", "my prints. Are the threaded rods bent or could that", "z axis of my diy printer. Now i have some", "coupler too stiff? [![enter image description here](https://i.stack.imgur.com/IbumF.jpg)](https://i.stack.imgur.com/IbumF.jpg)[![enter image description here](https://i.stack.imgur.com/Qo32X.jpg)](https://i.stack.imgur.com/Qo32X.jpg)", "issue? Or is the coupler too stiff? [![enter image description", "threaded rods bent or could that be a vibration issue?", "on the side of my prints. Are the threaded rods", "that be a vibration issue? Or is the coupler too", "axis of my diy printer. Now i have some strange", "of my diy printer. Now i have some strange waves", "could that be a vibration issue? Or is the coupler", "Now i have some strange waves on the side of", "my diy printer. Now i have some strange waves on", "diy printer. Now i have some strange waves on the", "rods bent or could that be a vibration issue? Or", "a vibration issue? Or is the coupler too stiff? [![enter", "Or is the coupler too stiff? [![enter image description here](https://i.stack.imgur.com/IbumF.jpg)](https://i.stack.imgur.com/IbumF.jpg)[![enter", "bent or could that be a vibration issue? Or is", "some strange waves on the side of my prints. Are", "the coupler too stiff? [![enter image description here](https://i.stack.imgur.com/IbumF.jpg)](https://i.stack.imgur.com/IbumF.jpg)[![enter image description", "replaced the z axis of my diy printer. Now i", "strange waves on the side of my prints. Are the", "Are the threaded rods bent or could that be a", "the side of my prints. Are the threaded rods bent", "is the coupler too stiff? [![enter image description here](https://i.stack.imgur.com/IbumF.jpg)](https://i.stack.imgur.com/IbumF.jpg)[![enter image", "printer. Now i have some strange waves on the side" ]
[ "I can't find aluminum extrusion needed, like this: [MiSUMi -", "are broken. I find frame project [AM8 - Metal Frame", "20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody knows where I can buy", "Base 20, 20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody knows where I", "find frame project [AM8 - Metal Frame for Anet A8](https://www.thingiverse.com/thing:2263216).", "Frame for Anet A8](https://www.thingiverse.com/thing:2263216). I like it but I can't", "this: [MiSUMi - Aluminum Extrusion - 5 series, Base 20,", "- 5 series, Base 20, 20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody", "broken. I find frame project [AM8 - Metal Frame for", "5 series, Base 20, 20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody knows", "where I can buy it in Ukraine? Or maybe another", "frame project [AM8 - Metal Frame for Anet A8](https://www.thingiverse.com/thing:2263216). I", "[MiSUMi - Aluminum Extrusion - 5 series, Base 20, 20mm", "knows where I can buy it in Ukraine? Or maybe", "extrusion needed, like this: [MiSUMi - Aluminum Extrusion - 5", "I can buy it in Ukraine? Or maybe another frame", "Maybe somebody knows where I can buy it in Ukraine?", "[AM8 - Metal Frame for Anet A8](https://www.thingiverse.com/thing:2263216). I like it", "but I can't find aluminum extrusion needed, like this: [MiSUMi", "Aluminum Extrusion - 5 series, Base 20, 20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40).", "like this: [MiSUMi - Aluminum Extrusion - 5 series, Base", "find aluminum extrusion needed, like this: [MiSUMi - Aluminum Extrusion", "Metal Frame for Anet A8](https://www.thingiverse.com/thing:2263216). I like it but I", "like it but I can't find aluminum extrusion needed, like", "can't find aluminum extrusion needed, like this: [MiSUMi - Aluminum", "project [AM8 - Metal Frame for Anet A8](https://www.thingiverse.com/thing:2263216). I like", "somebody knows where I can buy it in Ukraine? Or", "series, Base 20, 20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody knows where", "can buy it in Ukraine? Or maybe another frame options?", "aluminum extrusion needed, like this: [MiSUMi - Aluminum Extrusion -", "Anet A8 frame are broken. I find frame project [AM8", "A8 frame are broken. I find frame project [AM8 -", "I like it but I can't find aluminum extrusion needed,", "- Aluminum Extrusion - 5 series, Base 20, 20mm x", "20, 20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody knows where I can", "needed, like this: [MiSUMi - Aluminum Extrusion - 5 series,", "for Anet A8](https://www.thingiverse.com/thing:2263216). I like it but I can't find", "- Metal Frame for Anet A8](https://www.thingiverse.com/thing:2263216). I like it but", "I find frame project [AM8 - Metal Frame for Anet", "40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody knows where I can buy it in", "My Anet A8 frame are broken. I find frame project", "frame are broken. I find frame project [AM8 - Metal", "it but I can't find aluminum extrusion needed, like this:", "Extrusion - 5 series, Base 20, 20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe", "A8](https://www.thingiverse.com/thing:2263216). I like it but I can't find aluminum extrusion", "x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody knows where I can buy it", "Anet A8](https://www.thingiverse.com/thing:2263216). I like it but I can't find aluminum" ]
[ "There are a few coils (\"springs\") but no coiled tubes", "wondering if this is a limitation to 3D printing models?", "(i.e. the springs are hollow). Maybe my searching hasn't been", "hasn't been good enough! But I was wondering if this", "quite a few sites (thingiverse, grabcad, etc) in search for", "a coiled tube, but I have yet to find anything", "Maybe my searching hasn't been good enough! But I was", "but I have yet to find anything suitable. There are", "sites (thingiverse, grabcad, etc) in search for a coiled tube,", "I have yet to find anything suitable. There are a", "no coiled tubes (i.e. the springs are hollow). Maybe my", "was wondering if this is a limitation to 3D printing", "grabcad, etc) in search for a coiled tube, but I", "gone on quite a few sites (thingiverse, grabcad, etc) in", "but no coiled tubes (i.e. the springs are hollow). Maybe", "enough! But I was wondering if this is a limitation", "few sites (thingiverse, grabcad, etc) in search for a coiled", "have yet to find anything suitable. There are a few", "I've gone on quite a few sites (thingiverse, grabcad, etc)", "a few coils (\"springs\") but no coiled tubes (i.e. the", "suitable. There are a few coils (\"springs\") but no coiled", "(thingiverse, grabcad, etc) in search for a coiled tube, but", "yet to find anything suitable. There are a few coils", "springs are hollow). Maybe my searching hasn't been good enough!", "a few sites (thingiverse, grabcad, etc) in search for a", "few coils (\"springs\") but no coiled tubes (i.e. the springs", "tube, but I have yet to find anything suitable. There", "the springs are hollow). Maybe my searching hasn't been good", "been good enough! But I was wondering if this is", "coiled tubes (i.e. the springs are hollow). Maybe my searching", "search for a coiled tube, but I have yet to", "are a few coils (\"springs\") but no coiled tubes (i.e.", "tubes (i.e. the springs are hollow). Maybe my searching hasn't", "good enough! But I was wondering if this is a", "hollow). Maybe my searching hasn't been good enough! But I", "But I was wondering if this is a limitation to", "coils (\"springs\") but no coiled tubes (i.e. the springs are", "searching hasn't been good enough! But I was wondering if", "etc) in search for a coiled tube, but I have", "my searching hasn't been good enough! But I was wondering", "anything suitable. There are a few coils (\"springs\") but no", "on quite a few sites (thingiverse, grabcad, etc) in search", "I was wondering if this is a limitation to 3D", "are hollow). Maybe my searching hasn't been good enough! But", "in search for a coiled tube, but I have yet", "coiled tube, but I have yet to find anything suitable.", "find anything suitable. There are a few coils (\"springs\") but", "(\"springs\") but no coiled tubes (i.e. the springs are hollow).", "for a coiled tube, but I have yet to find", "to find anything suitable. There are a few coils (\"springs\")" ]
[ "a smart way to get this filled in and ready", "I use TinkerCad to convert to STL and that works", "fill it by hand with black ink and then scan", "I went back to the original drawing and using the", "to convert it to a good SVG later on. Looks", "to TinkerCad and tried it with Onshape but all I", "image and I need it to be sharp and tight", "is just the line and this does not work well", "be able to convert it to a good SVG later", "to SVG but that sounds really dumb. [![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png)", "drawing and using the bucket tool. The result is a", "by hand with black ink and then scan it and", "all I ever get is just the line and this", "and I would like to print it a couple of", "SVG later on. Looks like it is more of a", "well on my printer. What is a smart way to", "the line and this does not work well on my", "couple of mm high. I cannot figure out how to", "is a smart way to get this filled in and", "converted to SVG with Inkscape, used GIMP, took it online", "would like to print it a couple of mm high.", "does not work well on my printer. What is a", "So I could also try to edit the STL in", "the STL in stead of the SVG file. Maybe I", "noisy image and I need it to be sharp and", "be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I went back to the original drawing", "able to convert it to a good SVG later on.", "out how to get this line drawing filled. I converted", "and that works fine. So I could also try to", "high. I cannot figure out how to get this line", "to be able to convert it to a good SVG", "file. Maybe I should print the original scanned image (TIFF)", "get is just the line and this does not work", "really dumb. [![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I went back to", "and this does not work well on my printer. What", "filled in and ready to go? I use TinkerCad to", "should print the original scanned image (TIFF) and then fill", "with Inkscape, used GIMP, took it online to TinkerCad and", "filled. I converted to SVG with Inkscape, used GIMP, took", "good SVG later on. Looks like it is more of", "Onshape but all I ever get is just the line", "line drawing and I would like to print it a", "it by hand with black ink and then scan it", "I converted to SVG with Inkscape, used GIMP, took it", "I need it to be sharp and tight to be", "tight to be able to convert it to a good", "with black ink and then scan it and convert it", "that works fine. So I could also try to edit", "on my printer. What is a smart way to get", "Looks like it is more of a graphics design question", "STL in stead of the SVG file. Maybe I should", "to be sharp and tight to be able to convert", "drawing and I would like to print it a couple", "the SVG file. Maybe I should print the original scanned", "and ready to go? I use TinkerCad to convert to", "the original drawing and using the bucket tool. The result", "image (TIFF) and then fill it by hand with black", "cannot figure out how to get this line drawing filled.", "convert to STL and that works fine. So I could", "figure out how to get this line drawing filled. I", "get this line drawing filled. I converted to SVG with", "back to the original drawing and using the bucket tool.", "is a rather noisy image and I need it to", "original scanned image (TIFF) and then fill it by hand", "the original scanned image (TIFF) and then fill it by", "original drawing and using the bucket tool. The result is", "mm high. I cannot figure out how to get this", "that sounds really dumb. [![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I went", "of the SVG file. Maybe I should print the original", "used GIMP, took it online to TinkerCad and tried it", "Inkscape, used GIMP, took it online to TinkerCad and tried", "and I need it to be sharp and tight to", "print the original scanned image (TIFF) and then fill it", "but that sounds really dumb. [![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I", "and tight to be able to convert it to a", "to the original drawing and using the bucket tool. The", "like it is more of a graphics design question now..", "rather noisy image and I need it to be sharp", "[![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I went back to the original", "bucket tool. The result is a rather noisy image and", "ready to go? I use TinkerCad to convert to STL", "it and convert it to SVG but that sounds really", "it with Onshape but all I ever get is just", "smart way to get this filled in and ready to", "to STL and that works fine. So I could also", "SVG file. Maybe I should print the original scanned image", "SVG but that sounds really dumb. [![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE", "GIMP, took it online to TinkerCad and tried it with", "tried it with Onshape but all I ever get is", "and then fill it by hand with black ink and", "try to edit the STL in stead of the SVG", "a line drawing and I would like to print it", "on. Looks like it is more of a graphics design", "scan it and convert it to SVG but that sounds", "how to get this line drawing filled. I converted to", "to get this filled in and ready to go? I", "use TinkerCad to convert to STL and that works fine.", "stead of the SVG file. Maybe I should print the", "STL and that works fine. So I could also try", "also try to edit the STL in stead of the", "line and this does not work well on my printer.", "and tried it with Onshape but all I ever get", "with Onshape but all I ever get is just the", "drawing filled. I converted to SVG with Inkscape, used GIMP,", "I should print the original scanned image (TIFF) and then", "black ink and then scan it and convert it to", "it a couple of mm high. I cannot figure out", "then scan it and convert it to SVG but that", "to convert to STL and that works fine. So I", "line drawing filled. I converted to SVG with Inkscape, used", "it online to TinkerCad and tried it with Onshape but", "to go? I use TinkerCad to convert to STL and", "a couple of mm high. I cannot figure out how", "this filled in and ready to go? I use TinkerCad", "then fill it by hand with black ink and then", "ink and then scan it and convert it to SVG", "convert it to SVG but that sounds really dumb. [![should", "I cannot figure out how to get this line drawing", "work well on my printer. What is a smart way", "a graphics design question now.. <https://graphicdesign.stackexchange.com/questions/94773/from-drawing-to-3d-print> [![enter image description here](https://i.stack.imgur.com/jakBT.png)](https://i.stack.imgur.com/jakBT.png)", "tool. The result is a rather noisy image and I", "online to TinkerCad and tried it with Onshape but all", "be sharp and tight to be able to convert it", "What is a smart way to get this filled in", "sounds really dumb. [![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I went back", "This is a line drawing and I would like to", "it is more of a graphics design question now.. <https://graphicdesign.stackexchange.com/questions/94773/from-drawing-to-3d-print>", "convert it to a good SVG later on. Looks like", "to print it a couple of mm high. I cannot", "this line drawing filled. I converted to SVG with Inkscape,", "need it to be sharp and tight to be able", "it to a good SVG later on. Looks like it", "of mm high. I cannot figure out how to get", "to SVG with Inkscape, used GIMP, took it online to", "SVG with Inkscape, used GIMP, took it online to TinkerCad", "this does not work well on my printer. What is", "it to SVG but that sounds really dumb. [![should be", "took it online to TinkerCad and tried it with Onshape", "fine. So I could also try to edit the STL", "works fine. So I could also try to edit the", "printer. What is a smart way to get this filled", "and using the bucket tool. The result is a rather", "later on. Looks like it is more of a graphics", "(TIFF) and then fill it by hand with black ink", "went back to the original drawing and using the bucket", "is a line drawing and I would like to print", "SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I went back to the original drawing and", "of a graphics design question now.. <https://graphicdesign.stackexchange.com/questions/94773/from-drawing-to-3d-print> [![enter image description", "the bucket tool. The result is a rather noisy image", "in stead of the SVG file. Maybe I should print", "using the bucket tool. The result is a rather noisy", "get this filled in and ready to go? I use", "The result is a rather noisy image and I need", "is more of a graphics design question now.. <https://graphicdesign.stackexchange.com/questions/94773/from-drawing-to-3d-print> [![enter", "in and ready to go? I use TinkerCad to convert", "I could also try to edit the STL in stead", "sharp and tight to be able to convert it to", "way to get this filled in and ready to go?", "like to print it a couple of mm high. I", "UPDATE I went back to the original drawing and using", "ever get is just the line and this does not", "to a good SVG later on. Looks like it is", "I would like to print it a couple of mm", "to edit the STL in stead of the SVG file.", "just the line and this does not work well on", "edit the STL in stead of the SVG file. Maybe", "print it a couple of mm high. I cannot figure", "dumb. [![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I went back to the", "to get this line drawing filled. I converted to SVG", "TinkerCad and tried it with Onshape but all I ever", "a rather noisy image and I need it to be", "it to be sharp and tight to be able to", "result is a rather noisy image and I need it", "a good SVG later on. Looks like it is more", "could also try to edit the STL in stead of", "and convert it to SVG but that sounds really dumb.", "hand with black ink and then scan it and convert", "more of a graphics design question now.. <https://graphicdesign.stackexchange.com/questions/94773/from-drawing-to-3d-print> [![enter image", "TinkerCad to convert to STL and that works fine. So", "I ever get is just the line and this does", "not work well on my printer. What is a smart", "my printer. What is a smart way to get this", "and then scan it and convert it to SVG but", "scanned image (TIFF) and then fill it by hand with", "go? I use TinkerCad to convert to STL and that", "but all I ever get is just the line and", "Maybe I should print the original scanned image (TIFF) and" ]
[ "with experience got more suggestions on how to continue troubleshooting?", "printer (Facture Draken) for a couple weeks now printing in", "bottom of the resin tray. I have noticed that printing", "resin. * Upping base-layer cure-time from from 30seconds up to", "as pancakes stuck to the bottom of the resin tray.", "are more likely to stick in the vat. I assume", "increased contact with the tray. Usually it seems ~10 layers", "in half mid print. I have experimented with laying my", "on supports which stem from a square baseplate. It seems", "had some successful prints, but the majority (80%) end up", "that printing objects with a larger projection area are more", "while curing on the bottom of the resin tray. I", "up to 3 minutes, and variations between. * Upping base-layer", "the build plate, cleaning it with Acetone. Sanding it with", "Upping base-layer cure-time from from 30seconds up to 3 minutes,", "30seconds up to 3 minutes, and variations between. * Upping", "a couple weeks now printing in makerjuice waxcast. . I", "mid print. I have experimented with laying my models (round", "but the majority (80%) end up as pancakes stuck to", "laying my models (round circular diks) flat on the build", "contact with the tray. Usually it seems ~10 layers are", "force. Anyone with experience got more suggestions on how to", "with laying my models (round circular diks) flat on the", "build plate, but most of the times I place them", "a larger projection area are more likely to stick in", "tried * Pulling out the build plate, cleaning it with", "* Emptying the resin tray and replacing with new resin.", "initial tear force. Anyone with experience got more suggestions on", "(80%) end up as pancakes stuck to the bottom of", "which stem from a square baseplate. It seems clear to", "have tried * Pulling out the build plate, cleaning it", "seems clear to me that there is allot of force", "tray peel process from a corner rather than from a", "corner rather than from a long edge to reduce initial", "from from 30seconds up to 3 minutes, and variations between.", "our SLA printer (Facture Draken) for a couple weeks now", "and variations between. * Upping base-layer count from 2 to", "a long edge to reduce initial tear force. Anyone with", "me that there is allot of force being put on", "long edge to reduce initial tear force. Anyone with experience", "and replacing with new resin. * Upping base-layer cure-time from", "flat on the build plate, but most of the times", "others break in half mid print. I have experimented with", "Sanding it with 80 grit sandpaper. * Emptying the resin", "than from a long edge to reduce initial tear force.", "of force being put on the models while curing on", "Some others break in half mid print. I have experimented", "break in half mid print. I have experimented with laying", "it with Acetone. Sanding it with 80 grit sandpaper. ", "sandpaper. Emptying the resin tray and replacing with new", "most of the times I place them on supports which", "plate, but most of the times I place them on", "build plate, cleaning it with Acetone. Sanding it with 80", "printing objects with a larger projection area are more likely", "with a larger projection area are more likely to stick", "in makerjuice waxcast. . I have had some successful prints,", "of the resin tray. I have noticed that printing objects", "base 45% to start the tray peel process from a", "plate, cleaning it with Acetone. Sanding it with 80 grit", "to the bottom of the resin tray. Some others break", "SLA printer (Facture Draken) for a couple weeks now printing", "waxcast. . I have had some successful prints, but the", "projection area are more likely to stick in the vat.", "area are more likely to stick in the vat. I", "with 80 grit sandpaper. * Emptying the resin tray and", "tray. I have noticed that printing objects with a larger", "variations between. * Upping base-layer count from 2 to 4.", "them on supports which stem from a square baseplate. It", "Emptying the resin tray and replacing with new resin. ", "my models (round circular diks) flat on the build plate,", "replacing with new resin. Upping base-layer cure-time from from", "print. I have experimented with laying my models (round circular", "to stick in the vat. I assume this is because", "it with 80 grit sandpaper. * Emptying the resin tray", "from a square baseplate. It seems clear to me that", "the tray. Usually it seems ~10 layers are built before", "prints, but the majority (80%) end up as pancakes stuck", "this is because of the increased contact with the tray.", "tear force. Anyone with experience got more suggestions on how", "but most of the times I place them on supports", "* Upping base-layer cure-time from from 30seconds up to 3", "the majority (80%) end up as pancakes stuck to the", "that there is allot of force being put on the", "with our SLA printer (Facture Draken) for a couple weeks", "working with our SLA printer (Facture Draken) for a couple", "I have tried * Pulling out the build plate, cleaning", "peel process from a corner rather than from a long", "are built before my baseplate breaks away. Things I have", "rather than from a long edge to reduce initial tear", "models (round circular diks) flat on the build plate, but", "from 2 to 4. * Rotating model base 45% to", "times I place them on supports which stem from a", "my baseplate breaks away. Things I have tried * Pulling", "clear to me that there is allot of force being", "the vat. I assume this is because of the increased", "~10 layers are built before my baseplate breaks away. Things", "to me that there is allot of force being put", "allot of force being put on the models while curing", "up as pancakes stuck to the bottom of the resin", "count from 2 to 4. * Rotating model base 45%", "for a couple weeks now printing in makerjuice waxcast. .", "on the bottom of the resin tray. I have noticed", "I have had some successful prints, but the majority (80%)", "of the increased contact with the tray. Usually it seems", "to start the tray peel process from a corner rather", "with the tray. Usually it seems ~10 layers are built", "is because of the increased contact with the tray. Usually", "majority (80%) end up as pancakes stuck to the bottom", "have been working with our SLA printer (Facture Draken) for", "pancakes stuck to the bottom of the resin tray. Some", "noticed that printing objects with a larger projection area are", "objects with a larger projection area are more likely to", "new resin. * Upping base-layer cure-time from from 30seconds up", "tray. Some others break in half mid print. I have", "I assume this is because of the increased contact with", "between. * Upping base-layer count from 2 to 4. ", "the resin tray. Some others break in half mid print.", "a square baseplate. It seems clear to me that there", "from 30seconds up to 3 minutes, and variations between. ", "to 3 minutes, and variations between. * Upping base-layer count", "base-layer cure-time from from 30seconds up to 3 minutes, and", "been working with our SLA printer (Facture Draken) for a", "from a long edge to reduce initial tear force. Anyone", "Usually it seems ~10 layers are built before my baseplate", "breaks away. Things I have tried * Pulling out the", "the increased contact with the tray. Usually it seems ~10", "seems ~10 layers are built before my baseplate breaks away.", "now printing in makerjuice waxcast. . I have had some", "It seems clear to me that there is allot of", "built before my baseplate breaks away. Things I have tried", "the resin tray and replacing with new resin. * Upping", "* Upping base-layer count from 2 to 4. * Rotating", "to reduce initial tear force. Anyone with experience got more", "force being put on the models while curing on the", "Upping base-layer count from 2 to 4. * Rotating model", "reduce initial tear force. Anyone with experience got more suggestions", "bottom of the resin tray. Some others break in half", "printing in makerjuice waxcast. . I have had some successful", "being put on the models while curing on the bottom", "before my baseplate breaks away. Things I have tried ", "a corner rather than from a long edge to reduce", "on the models while curing on the bottom of the", "models while curing on the bottom of the resin tray.", "stuck to the bottom of the resin tray. Some others", "of the resin tray. Some others break in half mid", "diks) flat on the build plate, but most of the", "stick in the vat. I assume this is because of", "from a corner rather than from a long edge to", "process from a corner rather than from a long edge", ". I have had some successful prints, but the majority", "curing on the bottom of the resin tray. I have", "of the times I place them on supports which stem", "away. Things I have tried Pulling out the build", "I have noticed that printing objects with a larger projection", "4. * Rotating model base 45% to start the tray", "layers are built before my baseplate breaks away. Things I", "it seems ~10 layers are built before my baseplate breaks", "cure-time from from 30seconds up to 3 minutes, and variations", "stem from a square baseplate. It seems clear to me", "edge to reduce initial tear force. Anyone with experience got", "supports which stem from a square baseplate. It seems clear", "end up as pancakes stuck to the bottom of the", "likely to stick in the vat. I assume this is", "vat. I assume this is because of the increased contact", "Acetone. Sanding it with 80 grit sandpaper. * Emptying the", "minutes, and variations between. * Upping base-layer count from 2", "tray and replacing with new resin. * Upping base-layer cure-time", "Draken) for a couple weeks now printing in makerjuice waxcast.", "the models while curing on the bottom of the resin", "weeks now printing in makerjuice waxcast. . I have had", "with Acetone. Sanding it with 80 grit sandpaper. * Emptying", "have had some successful prints, but the majority (80%) end", "* Rotating model base 45% to start the tray peel", "the resin tray. I have noticed that printing objects with", "there is allot of force being put on the models", "grit sandpaper. * Emptying the resin tray and replacing with", "larger projection area are more likely to stick in the", "couple weeks now printing in makerjuice waxcast. . I have", "the build plate, but most of the times I place", "circular diks) flat on the build plate, but most of", "* Pulling out the build plate, cleaning it with Acetone.", "experimented with laying my models (round circular diks) flat on", "to 4. * Rotating model base 45% to start the", "out the build plate, cleaning it with Acetone. Sanding it", "cleaning it with Acetone. Sanding it with 80 grit sandpaper.", "I place them on supports which stem from a square", "resin tray and replacing with new resin. * Upping base-layer", "(round circular diks) flat on the build plate, but most", "baseplate breaks away. Things I have tried * Pulling out", "Rotating model base 45% to start the tray peel process", "the bottom of the resin tray. Some others break in", "in the vat. I assume this is because of the", "I have experimented with laying my models (round circular diks)", "put on the models while curing on the bottom of", "successful prints, but the majority (80%) end up as pancakes", "the bottom of the resin tray. I have noticed that", "baseplate. It seems clear to me that there is allot", "because of the increased contact with the tray. Usually it", "makerjuice waxcast. . I have had some successful prints, but", "the times I place them on supports which stem from", "resin tray. Some others break in half mid print. I", "3 minutes, and variations between. * Upping base-layer count from", "more likely to stick in the vat. I assume this", "the tray peel process from a corner rather than from", "square baseplate. It seems clear to me that there is", "model base 45% to start the tray peel process from", "Things I have tried * Pulling out the build plate,", "Pulling out the build plate, cleaning it with Acetone. Sanding", "is allot of force being put on the models while", "(Facture Draken) for a couple weeks now printing in makerjuice", "have experimented with laying my models (round circular diks) flat", "on the build plate, but most of the times I", "place them on supports which stem from a square baseplate.", "resin tray. I have noticed that printing objects with a", "half mid print. I have experimented with laying my models", "Anyone with experience got more suggestions on how to continue", "80 grit sandpaper. * Emptying the resin tray and replacing", "45% to start the tray peel process from a corner", "base-layer count from 2 to 4. * Rotating model base", "some successful prints, but the majority (80%) end up as", "I have been working with our SLA printer (Facture Draken)", "assume this is because of the increased contact with the", "tray. Usually it seems ~10 layers are built before my", "with new resin. * Upping base-layer cure-time from from 30seconds", "2 to 4. * Rotating model base 45% to start", "start the tray peel process from a corner rather than", "have noticed that printing objects with a larger projection area" ]
[ "printing machine. * Workforce * Technology * Money * etc.", "project. We wanted to get an idea of the prerequisites", "undergrad and my friends and I would like to make", "my friends and I would like to make a printer", "are the basic necessities needed to build a 3d printing", "* etc. I'm an undergrad and my friends and I", "and I would like to make a printer for a", "3d printing machine. * Workforce * Technology * Money ", "etc. I'm an undergrad and my friends and I would", "I would like to make a printer for a project.", "needed to build a 3d printing machine. Workforce ", "We wanted to get an idea of the prerequisites for", "to build a 3d printing machine. Workforce * Technology", "friends and I would like to make a printer for", "a project. We wanted to get an idea of the", "* Technology * Money * etc. I'm an undergrad and", "Money * etc. I'm an undergrad and my friends and", "Workforce * Technology * Money * etc. I'm an undergrad", "What are the basic necessities needed to build a 3d", "and my friends and I would like to make a", "would like to make a printer for a project. We", "build a 3d printing machine. * Workforce * Technology ", "a 3d printing machine. Workforce * Technology * Money", "* Money * etc. I'm an undergrad and my friends", "like to make a printer for a project. We wanted", "an undergrad and my friends and I would like to", "necessities needed to build a 3d printing machine. * Workforce", "to make a printer for a project. We wanted to", "I'm an undergrad and my friends and I would like", "a printer for a project. We wanted to get an", "to get an idea of the prerequisites for this work.", "printer for a project. We wanted to get an idea", "* Workforce * Technology * Money * etc. I'm an", "machine. * Workforce * Technology * Money * etc. I'm", "for a project. We wanted to get an idea of", "make a printer for a project. We wanted to get", "Technology * Money * etc. I'm an undergrad and my", "wanted to get an idea of the prerequisites for this", "basic necessities needed to build a 3d printing machine. *", "the basic necessities needed to build a 3d printing machine." ]
[ "6 metres to play with. I am mostly interested in", "sample is 10m x 1.75mm). How should I test the", "play with. I am mostly interested in producing functional (not", "metres. I would probably want to print a benchy, so", "interested in producing functional (not decorative) pieces. I do not", "printing a benchy will use about 4 metres. I would", "functional (not decorative) pieces. I do not have a heated", "a benchy will use about 4 metres. I would probably", "that leaves 6 metres to play with. I am mostly", "would probably want to print a benchy, so that leaves", "I have just ordered some filament samples (each sample is", "metres to play with. I am mostly interested in producing", "that there is only 10 metres of each to play", "test the samples, given that there is only 10 metres", "is 10m x 1.75mm). How should I test the samples,", "some filament samples (each sample is 10m x 1.75mm). How", "a benchy, so that leaves 6 metres to play with.", "will use about 4 metres. I would probably want to", "4 metres. I would probably want to print a benchy,", "filament samples (each sample is 10m x 1.75mm). How should", "1.75mm). How should I test the samples, given that there", "about 4 metres. I would probably want to print a", "use about 4 metres. I would probably want to print", "there is only 10 metres of each to play with?", "with. I am mostly interested in producing functional (not decorative)", "print a benchy, so that leaves 6 metres to play", "play with? Just printing a benchy will use about 4", "am mostly interested in producing functional (not decorative) pieces. I", "samples, given that there is only 10 metres of each", "with? Just printing a benchy will use about 4 metres.", "mostly interested in producing functional (not decorative) pieces. I do", "is only 10 metres of each to play with? Just", "so that leaves 6 metres to play with. I am", "to play with? Just printing a benchy will use about", "I would probably want to print a benchy, so that", "Just printing a benchy will use about 4 metres. I", "leaves 6 metres to play with. I am mostly interested", "the samples, given that there is only 10 metres of", "given that there is only 10 metres of each to", "to play with. I am mostly interested in producing functional", "benchy, so that leaves 6 metres to play with. I", "I am mostly interested in producing functional (not decorative) pieces.", "benchy will use about 4 metres. I would probably want", "I test the samples, given that there is only 10", "How should I test the samples, given that there is", "samples (each sample is 10m x 1.75mm). How should I", "(each sample is 10m x 1.75mm). How should I test", "should I test the samples, given that there is only", "producing functional (not decorative) pieces. I do not have a", "x 1.75mm). How should I test the samples, given that", "just ordered some filament samples (each sample is 10m x", "(not decorative) pieces. I do not have a heated bed.", "only 10 metres of each to play with? Just printing", "of each to play with? Just printing a benchy will", "each to play with? Just printing a benchy will use", "to print a benchy, so that leaves 6 metres to", "ordered some filament samples (each sample is 10m x 1.75mm).", "probably want to print a benchy, so that leaves 6", "have just ordered some filament samples (each sample is 10m", "in producing functional (not decorative) pieces. I do not have", "want to print a benchy, so that leaves 6 metres", "10m x 1.75mm). How should I test the samples, given", "metres of each to play with? Just printing a benchy", "10 metres of each to play with? Just printing a" ]
[ "my new Wanhao i3+. PLA plastic(Wanhao), basic normal quality settings", "quality settings in Cura (I guess 0.1 mm layer, 40", "Testing my new Wanhao i3+. PLA plastic(Wanhao), basic normal quality", "new Wanhao i3+. PLA plastic(Wanhao), basic normal quality settings in", "in layers where it cycles printing/no printing. There is no", "1.5 hours of printing quality degraded, it makes some loose", "be and how can I fix that? [![enter image description", "print continuously. What is the reason can be and how", "the reason can be and how can I fix that?", "temp, 200c extruder temp). After 1.5 hours of printing quality", "is the reason can be and how can I fix", "speed, 60c bed temp, 200c extruder temp). After 1.5 hours", "quality degraded, it makes some loose structure. Edit: After finish", "There is no problem on layers where it print continuously.", "where it cycles printing/no printing. There is no problem on", "is no problem on layers where it print continuously. What", "it print continuously. What is the reason can be and", "degraded, it makes some loose structure. Edit: After finish I", "it makes some loose structure. Edit: After finish I noticed", "bed temp, 200c extruder temp). After 1.5 hours of printing", "can be and how can I fix that? [![enter image", "normal quality settings in Cura (I guess 0.1 mm layer,", "printing. There is no problem on layers where it print", "reason can be and how can I fix that? [![enter", "problem exists only in layers where it cycles printing/no printing.", "loose structure. Edit: After finish I noticed that problem exists", "only in layers where it cycles printing/no printing. There is", "What is the reason can be and how can I", "guess 0.1 mm layer, 40 mm/s speed, 60c bed temp,", "After 1.5 hours of printing quality degraded, it makes some", "finish I noticed that problem exists only in layers where", "structure. Edit: After finish I noticed that problem exists only", "settings in Cura (I guess 0.1 mm layer, 40 mm/s", "I noticed that problem exists only in layers where it", "200c extruder temp). After 1.5 hours of printing quality degraded,", "plastic(Wanhao), basic normal quality settings in Cura (I guess 0.1", "layers where it cycles printing/no printing. There is no problem", "some loose structure. Edit: After finish I noticed that problem", "of printing quality degraded, it makes some loose structure. Edit:", "exists only in layers where it cycles printing/no printing. There", "extruder temp). After 1.5 hours of printing quality degraded, it", "cycles printing/no printing. There is no problem on layers where", "printing/no printing. There is no problem on layers where it", "layer, 40 mm/s speed, 60c bed temp, 200c extruder temp).", "where it print continuously. What is the reason can be", "60c bed temp, 200c extruder temp). After 1.5 hours of", "After finish I noticed that problem exists only in layers", "on layers where it print continuously. What is the reason", "problem on layers where it print continuously. What is the", "layers where it print continuously. What is the reason can", "i3+. PLA plastic(Wanhao), basic normal quality settings in Cura (I", "printing quality degraded, it makes some loose structure. Edit: After", "makes some loose structure. Edit: After finish I noticed that", "(I guess 0.1 mm layer, 40 mm/s speed, 60c bed", "mm/s speed, 60c bed temp, 200c extruder temp). After 1.5", "in Cura (I guess 0.1 mm layer, 40 mm/s speed,", "noticed that problem exists only in layers where it cycles", "Cura (I guess 0.1 mm layer, 40 mm/s speed, 60c", "temp). After 1.5 hours of printing quality degraded, it makes", "continuously. What is the reason can be and how can", "that problem exists only in layers where it cycles printing/no", "and how can I fix that? [![enter image description here](https://i.stack.imgur.com/W90dj.jpg)](https://i.stack.imgur.com/W90dj.jpg)", "Edit: After finish I noticed that problem exists only in", "no problem on layers where it print continuously. What is", "0.1 mm layer, 40 mm/s speed, 60c bed temp, 200c", "basic normal quality settings in Cura (I guess 0.1 mm", "PLA plastic(Wanhao), basic normal quality settings in Cura (I guess", "mm layer, 40 mm/s speed, 60c bed temp, 200c extruder", "40 mm/s speed, 60c bed temp, 200c extruder temp). After", "it cycles printing/no printing. There is no problem on layers", "Wanhao i3+. PLA plastic(Wanhao), basic normal quality settings in Cura", "hours of printing quality degraded, it makes some loose structure." ]
[ "off. I am using Marlin 1.1.4 on a RAMPS 1.4", "I am trying to \"burn\" a group of vertical lines", "turn off. I am using Marlin 1.1.4 on a RAMPS", "So I tried P44, no good then P6 also not", "control the pulse width with M42 P6(or 44) S0 (to", "settings, different USB cable and different USB ports on my", "good.\\ What my problem is I am trying to \"burn\"", "with M42 P6(or 44) S0 (to 255) and it follows", "burns and/or \"streaks\" where the laser does not turn off.", "and it follows just fine. It is ONLY while I", "other outputs. These other outputs use different timers in the", "also. When I am not printing, the pulses are perfect", "that is why I am trying these other outputs. These", "and that is why I am trying these other outputs.", "to the laser power supply is either \"skipping\" (missing the", "When I am not printing, the pulses are perfect and", "and/or \"streaks\" where the laser does not turn off. I", "What my problem is I am trying to \"burn\" a", "outputs use different timers in the 2560 as well. I", "trying to \"burn\" a group of vertical lines spaced about", "This results in missed burns and/or \"streaks\" where the laser", "44) S0 (to 255) and it follows just fine. It", "my computer, with no change. What might I be missing?", "firmware settings, different USB cable and different USB ports on", "is either \"skipping\" (missing the control pulse) or stretching the", "on D9 (fan) and that is why I am trying", "am not printing, the pulses are perfect and I can", "go south. This also occurs on D9 (fan) and that", "(missing the control pulse) or stretching the pulse. This results", "am printing and the steppers are moving that things go", "This also occurs on D9 (fan) and that is why", "laser with the fan (D9) and ran into problems. So", "and ran into problems. So I tried P44, no good", "pulses are perfect and I can control the pulse width", "1.1.4 on a RAMPS 1.4 board (clone) on an Arduino", "south. This also occurs on D9 (fan) and that is", "the pulses are perfect and I can control the pulse", "that things go south. This also occurs on D9 (fan)", "(D9) and ran into problems. So I tried P44, no", "in the 2560 as well. I have tried all sorts", "I am not printing, the pulses are perfect and I", "also not good.\\ What my problem is I am trying", "about 0.75\" apart, and randomly the drive to the laser", "on a RAMPS 1.4 board (clone) on an Arduino close", "the laser power supply is either \"skipping\" (missing the control", "just fine. It is ONLY while I am printing and", "combinations of firmware settings, different USB cable and different USB", "outputs. These other outputs use different timers in the 2560", "a group of vertical lines spaced about 0.75\" apart, and", "a laser with the fan (D9) and ran into problems.", "why I am trying these other outputs. These other outputs", "close also. When I am not printing, the pulses are", "can control the pulse width with M42 P6(or 44) S0", "M42 P6(or 44) S0 (to 255) and it follows just", "perfect and I can control the pulse width with M42", "missed burns and/or \"streaks\" where the laser does not turn", "in missed burns and/or \"streaks\" where the laser does not", "am using Marlin 1.1.4 on a RAMPS 1.4 board (clone)", "well. I have tried all sorts and combinations of firmware", "fine. It is ONLY while I am printing and the", "use different timers in the 2560 as well. I have", "the drive to the laser power supply is either \"skipping\"", "\"skipping\" (missing the control pulse) or stretching the pulse. This", "either \"skipping\" (missing the control pulse) or stretching the pulse.", "moving that things go south. This also occurs on D9", "I am trying to control a laser with the fan", "S0 (to 255) and it follows just fine. It is", "am trying these other outputs. These other outputs use different", "of vertical lines spaced about 0.75\" apart, and randomly the", "USB cable and different USB ports on my computer, with", "good then P6 also not good.\\ What my problem is", "ran into problems. So I tried P44, no good then", "stretching the pulse. This results in missed burns and/or \"streaks\"", "it follows just fine. It is ONLY while I am", "steppers are moving that things go south. This also occurs", "spaced about 0.75\" apart, and randomly the drive to the", "problem is I am trying to \"burn\" a group of", "vertical lines spaced about 0.75\" apart, and randomly the drive", "my problem is I am trying to \"burn\" a group", "are perfect and I can control the pulse width with", "then P6 also not good.\\ What my problem is I", "to \"burn\" a group of vertical lines spaced about 0.75\"", "control a laser with the fan (D9) and ran into", "things go south. This also occurs on D9 (fan) and", "P6(or 44) S0 (to 255) and it follows just fine.", "and combinations of firmware settings, different USB cable and different", "tried P44, no good then P6 also not good.\\ What", "I have tried all sorts and combinations of firmware settings,", "I am using Marlin 1.1.4 on a RAMPS 1.4 board", "other outputs use different timers in the 2560 as well.", "group of vertical lines spaced about 0.75\" apart, and randomly", "are moving that things go south. This also occurs on", "control pulse) or stretching the pulse. This results in missed", "I am trying these other outputs. These other outputs use", "a RAMPS 1.4 board (clone) on an Arduino close also.", "to control a laser with the fan (D9) and ran", "(fan) and that is why I am trying these other", "trying to control a laser with the fan (D9) and", "\"burn\" a group of vertical lines spaced about 0.75\" apart,", "the pulse width with M42 P6(or 44) S0 (to 255)", "as well. I have tried all sorts and combinations of", "width with M42 P6(or 44) S0 (to 255) and it", "using Marlin 1.1.4 on a RAMPS 1.4 board (clone) on", "is why I am trying these other outputs. These other", "of firmware settings, different USB cable and different USB ports", "the fan (D9) and ran into problems. So I tried", "with the fan (D9) and ran into problems. So I", "on my computer, with no change. What might I be", "and I can control the pulse width with M42 P6(or", "P44, no good then P6 also not good.\\ What my", "different USB cable and different USB ports on my computer,", "printing, the pulses are perfect and I can control the", "pulse width with M42 P6(or 44) S0 (to 255) and", "laser power supply is either \"skipping\" (missing the control pulse)", "is I am trying to \"burn\" a group of vertical", "These other outputs use different timers in the 2560 as", "P6 also not good.\\ What my problem is I am", "lines spaced about 0.75\" apart, and randomly the drive to", "apart, and randomly the drive to the laser power supply", "all sorts and combinations of firmware settings, different USB cable", "and randomly the drive to the laser power supply is", "the pulse. This results in missed burns and/or \"streaks\" where", "an Arduino close also. When I am not printing, the", "follows just fine. It is ONLY while I am printing", "D9 (fan) and that is why I am trying these", "\"streaks\" where the laser does not turn off. I am", "I am printing and the steppers are moving that things", "different USB ports on my computer, with no change. What", "also occurs on D9 (fan) and that is why I", "and different USB ports on my computer, with no change.", "laser does not turn off. I am using Marlin 1.1.4", "It is ONLY while I am printing and the steppers", "am trying to control a laser with the fan (D9)", "cable and different USB ports on my computer, with no", "is ONLY while I am printing and the steppers are", "drive to the laser power supply is either \"skipping\" (missing", "Marlin 1.1.4 on a RAMPS 1.4 board (clone) on an", "not printing, the pulses are perfect and I can control", "I can control the pulse width with M42 P6(or 44)", "trying these other outputs. These other outputs use different timers", "different timers in the 2560 as well. I have tried", "occurs on D9 (fan) and that is why I am", "and the steppers are moving that things go south. This", "these other outputs. These other outputs use different timers in", "the laser does not turn off. I am using Marlin", "where the laser does not turn off. I am using", "Arduino close also. When I am not printing, the pulses", "problems. So I tried P44, no good then P6 also", "while I am printing and the steppers are moving that", "timers in the 2560 as well. I have tried all", "USB ports on my computer, with no change. What might", "power supply is either \"skipping\" (missing the control pulse) or", "fan (D9) and ran into problems. So I tried P44,", "randomly the drive to the laser power supply is either", "board (clone) on an Arduino close also. When I am", "(to 255) and it follows just fine. It is ONLY", "the 2560 as well. I have tried all sorts and", "into problems. So I tried P44, no good then P6", "not good.\\ What my problem is I am trying to", "does not turn off. I am using Marlin 1.1.4 on", "ONLY while I am printing and the steppers are moving", "RAMPS 1.4 board (clone) on an Arduino close also. When", "not turn off. I am using Marlin 1.1.4 on a", "(clone) on an Arduino close also. When I am not", "0.75\" apart, and randomly the drive to the laser power", "the control pulse) or stretching the pulse. This results in", "or stretching the pulse. This results in missed burns and/or", "printing and the steppers are moving that things go south.", "am trying to \"burn\" a group of vertical lines spaced", "1.4 board (clone) on an Arduino close also. When I", "pulse) or stretching the pulse. This results in missed burns", "supply is either \"skipping\" (missing the control pulse) or stretching", "I tried P44, no good then P6 also not good.\\", "tried all sorts and combinations of firmware settings, different USB", "2560 as well. I have tried all sorts and combinations", "the steppers are moving that things go south. This also", "ports on my computer, with no change. What might I", "results in missed burns and/or \"streaks\" where the laser does", "no good then P6 also not good.\\ What my problem", "on an Arduino close also. When I am not printing,", "255) and it follows just fine. It is ONLY while", "have tried all sorts and combinations of firmware settings, different", "sorts and combinations of firmware settings, different USB cable and", "pulse. This results in missed burns and/or \"streaks\" where the" ]
[ "mm plate. This would extend over the edge of the", "stretch the y-dimension travel and I have found a 229x257", "a 220x220 mm heated aluminum bed and I print with", "a 229x257 mm plate. This would extend over the edge", "have found a 229x257 mm plate. This would extend over", "conduction and mass of the glass plate be sufficient to", "found a 229x257 mm plate. This would extend over the", "heated aluminum bed and I print with a Borosilicate glass", "I could adjust to settings and end stop to stretch", "I have a slightly longer print (245 mm) I would", "plate. This would extend over the edge of the aluminum", "and I print with a Borosilicate glass plate. I have", "the thermal conduction and mass of the glass plate be", "extend over the edge of the aluminum bed. Will the", "end stop to stretch the y-dimension travel and I have", "the edge of the aluminum bed. Will the thermal conduction", "to stretch the y-dimension travel and I have found a", "TronXY printer (i3 Clone). It has a 220x220 mm heated", "bed. Will the thermal conduction and mass of the glass", "edge of the aluminum bed. Will the thermal conduction and", "adjust to settings and end stop to stretch the y-dimension", "mm) I would like to do and I think I", "to do and I think I could adjust to settings", "the y-dimension travel and I have found a 229x257 mm", "would like to do and I think I could adjust", "the glass plate be sufficient to still keep the bed", "mass of the glass plate be sufficient to still keep", "of the glass plate be sufficient to still keep the", "have a TronXY printer (i3 Clone). It has a 220x220", "could adjust to settings and end stop to stretch the", "settings and end stop to stretch the y-dimension travel and", "and I think I could adjust to settings and end", "220x220 mm heated aluminum bed and I print with a", "a Borosilicate glass plate. I have a slightly longer print", "plate be sufficient to still keep the bed warm enough?", "like to do and I think I could adjust to", "print with a Borosilicate glass plate. I have a slightly", "of the aluminum bed. Will the thermal conduction and mass", "I have a TronXY printer (i3 Clone). It has a", "Will the thermal conduction and mass of the glass plate", "I would like to do and I think I could", "slightly longer print (245 mm) I would like to do", "mm heated aluminum bed and I print with a Borosilicate", "travel and I have found a 229x257 mm plate. This", "thermal conduction and mass of the glass plate be sufficient", "print (245 mm) I would like to do and I", "aluminum bed and I print with a Borosilicate glass plate.", "y-dimension travel and I have found a 229x257 mm plate.", "do and I think I could adjust to settings and", "a slightly longer print (245 mm) I would like to", "plate. I have a slightly longer print (245 mm) I", "over the edge of the aluminum bed. Will the thermal", "Clone). It has a 220x220 mm heated aluminum bed and", "(245 mm) I would like to do and I think", "bed and I print with a Borosilicate glass plate. I", "This would extend over the edge of the aluminum bed.", "the aluminum bed. Will the thermal conduction and mass of", "aluminum bed. Will the thermal conduction and mass of the", "It has a 220x220 mm heated aluminum bed and I", "and end stop to stretch the y-dimension travel and I", "I have found a 229x257 mm plate. This would extend", "glass plate be sufficient to still keep the bed warm", "229x257 mm plate. This would extend over the edge of", "think I could adjust to settings and end stop to", "printer (i3 Clone). It has a 220x220 mm heated aluminum", "and I have found a 229x257 mm plate. This would", "has a 220x220 mm heated aluminum bed and I print", "would extend over the edge of the aluminum bed. Will", "stop to stretch the y-dimension travel and I have found", "and mass of the glass plate be sufficient to still", "have a slightly longer print (245 mm) I would like", "glass plate. I have a slightly longer print (245 mm)", "I print with a Borosilicate glass plate. I have a", "Borosilicate glass plate. I have a slightly longer print (245", "(i3 Clone). It has a 220x220 mm heated aluminum bed", "I think I could adjust to settings and end stop", "to settings and end stop to stretch the y-dimension travel", "a TronXY printer (i3 Clone). It has a 220x220 mm", "with a Borosilicate glass plate. I have a slightly longer", "longer print (245 mm) I would like to do and" ]
[ "change the direction a motor goes with G-code instead of", "to change the direction a motor goes with G-code instead", "there a way to change the direction a motor goes", "a way to change the direction a motor goes with", "direction a motor goes with G-code instead of reconfiguring Marlin", "the direction a motor goes with G-code instead of reconfiguring", "Is there a way to change the direction a motor", "a motor goes with G-code instead of reconfiguring Marlin firmware?", "way to change the direction a motor goes with G-code" ]
[ "dreams, etc about 3D printing Thank you so much for", "startup accelerator for high school and I was hoping to", "does it take? What would make you more likely to", "likely encountered. What workarounds and aftermarket modifications are the most", "be? How do you troubleshoot issues and how long does", "issues and how long does it take? What would make", "it take? What would make you more likely to 3d", "3d print more often (ie never clogged, didn't have to", "MIT Launch startup accelerator for high school and I was", "would it be? How do you troubleshoot issues and how", "useful? If you could change one thing about your printer", "I'm working with a group at the MIT Launch startup", "take? What would make you more likely to 3d print", "accelerator for high school and I was hoping to do", "never clogged, didn't have to watch first layer, etc)? In", "I was hoping to get some feedback from all your", "workarounds and aftermarket modifications are the most useful? If you", "Just share any wishes, thoughts, hopes, dreams, etc about 3D", "a group at the MIT Launch startup accelerator for high", "what would it be? How do you troubleshoot issues and", "first layer, etc)? In your opinion, what are the biggest", "3D printing and the hours of troubleshooting you've likely encountered.", "some market research regarding some of the current problems with", "from all your experience with 3D printing and the hours", "you could change one thing about your printer what would", "more likely to 3d print more often (ie never clogged,", "printing and the hours of troubleshooting you've likely encountered. What", "your experience with 3D printing and the hours of troubleshooting", "long does it take? What would make you more likely", "and the hours of troubleshooting you've likely encountered. What workarounds", "current problems with desktop 3D printers. I was hoping to", "with desktop 3D printers. I was hoping to get some", "desktop 3D printers. I was hoping to get some feedback", "you more likely to 3d print more often (ie never", "didn't have to watch first layer, etc)? In your opinion,", "what are the biggest issues the desktop 3D printing industry", "hours of troubleshooting you've likely encountered. What workarounds and aftermarket", "printing industry faces? Just share any wishes, thoughts, hopes, dreams,", "with a group at the MIT Launch startup accelerator for", "do you troubleshoot issues and how long does it take?", "you so much for your time and sharing your experience!", "at the MIT Launch startup accelerator for high school and", "to do some market research regarding some of the current", "group at the MIT Launch startup accelerator for high school", "If you could change one thing about your printer what", "some of the current problems with desktop 3D printers. I", "What workarounds and aftermarket modifications are the most useful? If", "some feedback from all your experience with 3D printing and", "printing Thank you so much for your time and sharing", "more often (ie never clogged, didn't have to watch first", "clogged, didn't have to watch first layer, etc)? In your", "thoughts, hopes, dreams, etc about 3D printing Thank you so", "the current problems with desktop 3D printers. I was hoping", "school and I was hoping to do some market research", "often (ie never clogged, didn't have to watch first layer,", "I was hoping to do some market research regarding some", "wishes, thoughts, hopes, dreams, etc about 3D printing Thank you", "3D printing industry faces? Just share any wishes, thoughts, hopes,", "likely to 3d print more often (ie never clogged, didn't", "research regarding some of the current problems with desktop 3D", "any wishes, thoughts, hopes, dreams, etc about 3D printing Thank", "about your printer what would it be? How do you", "faces? Just share any wishes, thoughts, hopes, dreams, etc about", "the desktop 3D printing industry faces? Just share any wishes,", "was hoping to do some market research regarding some of", "problems with desktop 3D printers. I was hoping to get", "the hours of troubleshooting you've likely encountered. What workarounds and", "(ie never clogged, didn't have to watch first layer, etc)?", "In your opinion, what are the biggest issues the desktop", "etc)? In your opinion, what are the biggest issues the", "have to watch first layer, etc)? In your opinion, what", "for high school and I was hoping to do some", "layer, etc)? In your opinion, what are the biggest issues", "3D printing Thank you so much for your time and", "opinion, what are the biggest issues the desktop 3D printing", "aftermarket modifications are the most useful? If you could change", "encountered. What workarounds and aftermarket modifications are the most useful?", "hoping to get some feedback from all your experience with", "to get some feedback from all your experience with 3D", "of troubleshooting you've likely encountered. What workarounds and aftermarket modifications", "to watch first layer, etc)? In your opinion, what are", "modifications are the most useful? If you could change one", "your printer what would it be? How do you troubleshoot", "industry faces? Just share any wishes, thoughts, hopes, dreams, etc", "regarding some of the current problems with desktop 3D printers.", "and I was hoping to do some market research regarding", "get some feedback from all your experience with 3D printing", "Thank you so much for your time and sharing your", "to 3d print more often (ie never clogged, didn't have", "print more often (ie never clogged, didn't have to watch", "hoping to do some market research regarding some of the", "you've likely encountered. What workarounds and aftermarket modifications are the", "make you more likely to 3d print more often (ie", "working with a group at the MIT Launch startup accelerator", "are the biggest issues the desktop 3D printing industry faces?", "and how long does it take? What would make you", "printers. I was hoping to get some feedback from all", "desktop 3D printing industry faces? Just share any wishes, thoughts,", "the MIT Launch startup accelerator for high school and I", "etc about 3D printing Thank you so much for your", "troubleshoot issues and how long does it take? What would", "How do you troubleshoot issues and how long does it", "change one thing about your printer what would it be?", "your opinion, what are the biggest issues the desktop 3D", "market research regarding some of the current problems with desktop", "biggest issues the desktop 3D printing industry faces? Just share", "Launch startup accelerator for high school and I was hoping", "3D printers. I was hoping to get some feedback from", "how long does it take? What would make you more", "of the current problems with desktop 3D printers. I was", "experience with 3D printing and the hours of troubleshooting you've", "the biggest issues the desktop 3D printing industry faces? Just", "was hoping to get some feedback from all your experience", "you troubleshoot issues and how long does it take? What", "all your experience with 3D printing and the hours of", "the most useful? If you could change one thing about", "do some market research regarding some of the current problems", "share any wishes, thoughts, hopes, dreams, etc about 3D printing", "one thing about your printer what would it be? How", "issues the desktop 3D printing industry faces? Just share any", "thing about your printer what would it be? How do", "What would make you more likely to 3d print more", "watch first layer, etc)? In your opinion, what are the", "would make you more likely to 3d print more often", "and aftermarket modifications are the most useful? If you could", "high school and I was hoping to do some market", "about 3D printing Thank you so much for your time", "it be? How do you troubleshoot issues and how long", "feedback from all your experience with 3D printing and the", "are the most useful? If you could change one thing", "with 3D printing and the hours of troubleshooting you've likely", "could change one thing about your printer what would it", "printer what would it be? How do you troubleshoot issues", "hopes, dreams, etc about 3D printing Thank you so much", "most useful? If you could change one thing about your", "troubleshooting you've likely encountered. What workarounds and aftermarket modifications are" ]
[ "help me find/confirm the information needed to setup the CR-10", "Y max = Unclear where this comes from * Gantry", "Number of Extruders = 1 * Material Diameter - 1.75", "in the Cura Software I have following settings from research:", "* Gantry Height = Unclear where this is measured from", "anyone help me find/confirm the information needed to setup the", "CR-10 in the Cura Software I have following settings from", "= 300 mm * y = 300 mm * z", "* Number of Extruders = 1 * Material Diameter -", "= 400 mm * Build Plate = Rectangular * Machine", "mm * y = 300 mm * z = 400", "Uncertain - please help confirm this Print Head Settings** ", "where this comes from* * Y min = *Unclear where", " Y min = Unclear where this comes from ", "comes from* * Gantry Height = *Unclear where this is", " Heated Bed = Checked * G-code Flavor = RepRap", "from** * Number of Extruders = 1 * Material Diameter", "following settings from research: Printer Settings * x = 300", "X max = Unclear where this comes from * Y", "measured from** * Number of Extruders = 1 * Material", "have following settings from research: Printer Settings * x =", "= Rectangular * Machine Center is Zero = Checked ", "= Unclear where this is measured from* * Number of", "Cura Software I have following settings from research: Printer Settings", "is Zero = Checked * Heated Bed = Checked ", "comes from* * Y min = *Unclear where this comes", " X min = Unclear where this comes from ", "Checked Heated Bed = Checked * G-code Flavor =", "* Build Plate = Rectangular * Machine Center is Zero", "= 1 * Material Diameter - 1.75 mm * Nozzle", "from** * Gantry Height = Unclear where this is measured", "Settings * x = 300 mm * y = 300", "setup the CR-10 in the Cura Software I have following", "me find/confirm the information needed to setup the CR-10 in", "Center is Zero = Checked * Heated Bed = Checked", "Y min = Unclear where this comes from * X", "Printer Settings * x = 300 mm * y =", "mm * z = 400 mm * Build Plate =", "settings from research: Printer Settings * x = 300 mm", "Machine Center is Zero = Checked * Heated Bed =", "= Unclear where this comes from * Y max =", "X min = Unclear where this comes from * Y", "* X max = Unclear where this comes from ", "from research: Printer Settings* * x = 300 mm ", "z = 400 mm Build Plate = Rectangular ", "Bed = Checked G-code Flavor = RepRap (Marlin/Sprinter) *--", "x = 300 mm y = 300 mm ", "Checked G-code Flavor = RepRap (Marlin/Sprinter) -- Uncertain -", "help confirm this Print Head Settings * X min =", "this comes from** * Y max = Unclear where this", "Gantry Height = Unclear where this is measured from** ", "Material Diameter - 1.75 mm Nozzle size = 0.4", "* y = 300 mm * z = 400 mm", "Unclear where this comes from * Gantry Height = Unclear", "= RepRap (Marlin/Sprinter) -- Uncertain - please help confirm this*", " x = 300 mm * y = 300 mm", "Heated Bed = Checked * G-code Flavor = RepRap (Marlin/Sprinter)", "where this comes from** * X max = Unclear where", "this comes from * X max = Unclear where this", "where this comes from * Y max = Unclear where", "from * X max = Unclear where this comes from", "Unclear where this is measured from * Number of Extruders", "comes from** * Y max = *Unclear where this comes", "information needed to setup the CR-10 in the Cura Software", "Plate = Rectangular Machine Center is Zero = Checked", "mm * Build Plate = Rectangular * Machine Center is", "the Cura Software I have following settings from research: *Printer", "Can anyone help me find/confirm the information needed to setup", "Rectangular Machine Center is Zero = Checked * Heated", "- please help confirm this Print Head Settings** * X", "from** * Y max = Unclear where this comes from", "400 mm * Build Plate = Rectangular * Machine Center", "* G-code Flavor = RepRap (Marlin/Sprinter) *-- Uncertain - please", "= 300 mm z = 400 mm * Build", "Print Head Settings * X min = Unclear where this", "Unclear where this comes from** * X max = Unclear", "max = Unclear where this comes from** * Gantry Height", "where this comes from** * Gantry Height = *Unclear where", "Extruders = 1 Material Diameter - 1.75 mm ", "the CR-10 in the Cura Software I have following settings", "Flavor = RepRap (Marlin/Sprinter) -- Uncertain - please help confirm", "Diameter - 1.75 mm Nozzle size = 0.4 mm", "(Marlin/Sprinter) -- Uncertain - please help confirm this Print Head", "min = Unclear where this comes from** * X max", "this comes from** * Gantry Height = Unclear where this", "needed to setup the CR-10 in the Cura Software I", "Unclear where this comes from** * Y min = *Unclear", " z = 400 mm * Build Plate = Rectangular", "min = Unclear where this comes from * Y min", "300 mm * z = 400 mm * Build Plate", "Build Plate = Rectangular * Machine Center is Zero =", "= Unclear where this comes from * X max =", "= Unclear where this comes from * Gantry Height =", "comes from** * X max = *Unclear where this comes", "find/confirm the information needed to setup the CR-10 in the", " Y max = Unclear where this comes from ", "Software I have following settings from research: Printer Settings* ", "this is measured from* * Number of Extruders = 1", "Zero = Checked * Heated Bed = Checked * G-code", "RepRap (Marlin/Sprinter) -- Uncertain - please help confirm this Print", "the information needed to setup the CR-10 in the Cura", "from * Y min = Unclear where this comes from", "= Checked * Heated Bed = Checked * G-code Flavor", "of Extruders = 1 * Material Diameter - 1.75 mm", "* Machine Center is Zero = Checked * Heated Bed", "confirm this Print Head Settings** * X min = *Unclear", "y = 300 mm z = 400 mm ", "this comes from* * Y min = *Unclear where this", " Material Diameter - 1.75 mm * Nozzle size =", "= Checked * G-code Flavor = RepRap (Marlin/Sprinter) -- Uncertain", "max = Unclear where this comes from** * Y max", "Unclear where this comes from * Y max = Unclear", "to setup the CR-10 in the Cura Software I have", "Head Settings * X min = Unclear where this comes", "is measured from * Number of Extruders = 1 ", "research: Printer Settings* * x = 300 mm * y", "1 * Material Diameter - 1.75 mm * Nozzle size", "this Print Head Settings** * X min = Unclear where", "G-code Flavor = RepRap (Marlin/Sprinter) -- Uncertain - please help", "300 mm * y = 300 mm * z =", "where this is measured from** * Number of Extruders =", "I have following settings from research: Printer Settings * x", "please help confirm this Print Head Settings** * X min", "= Unclear where this comes from * Y min =", "Settings** * X min = Unclear where this comes from", "Height = Unclear where this is measured from * Number", "-- Uncertain - please help confirm this Print Head Settings" ]
[ "up with their advertisements online of a 150mm/s printing speed.", "shell speed: 30mm/s However, this doesn’t line up with their", "there better settings to use, especially ones which can speed", "there any other measures which I can take in order", "with their advertisements online of a 150mm/s printing speed. Are", "I can take in order to reduce printing time in", "Speed: 80mm/s * Bottom Layer Speed: 20mm/s * Infill Speed:", "speed up printing time? Or are there any other measures", "Or are there any other measures which I can take", "to use, especially ones which can speed up printing time?", "* Print speed: 50mm/s * Travel Speed: 80mm/s * Bottom", "examples of: * Print speed: 50mm/s * Travel Speed: 80mm/s", "up prints for the Monoprice Select IIIP Plus printer? The", "Travel Speed: 80mm/s * Bottom Layer Speed: 20mm/s * Infill", "Speed: 20mm/s * Infill Speed: 50mm/s * Outer shell speed:", "a 150mm/s printing speed. Are there better settings to use,", "use, especially ones which can speed up printing time? Or", "printer? The manual shows [Cura] examples of: * Print speed:", "of a 150mm/s printing speed. Are there better settings to", "30mm/s However, this doesn’t line up with their advertisements online", "Monoprice Select IIIP Plus printer? The manual shows [Cura] examples", "20mm/s * Infill Speed: 50mm/s * Outer shell speed: 15mm/s", "[Cura] examples of: * Print speed: 50mm/s * Travel Speed:", "Plus printer? The manual shows [Cura] examples of: * Print", "Are there better settings to use, especially ones which can", "speed: 15mm/s * Inner shell speed: 30mm/s However, this doesn’t", "doesn’t line up with their advertisements online of a 150mm/s", "do I speed up prints for the Monoprice Select IIIP", "printing speed. Are there better settings to use, especially ones", "I speed up prints for the Monoprice Select IIIP Plus", "50mm/s * Outer shell speed: 15mm/s * Inner shell speed:", "can take in order to reduce printing time in general?", "How do I speed up prints for the Monoprice Select", "time? Or are there any other measures which I can", "speed. Are there better settings to use, especially ones which", "prints for the Monoprice Select IIIP Plus printer? The manual", "50mm/s * Travel Speed: 80mm/s * Bottom Layer Speed: 20mm/s", "Select IIIP Plus printer? The manual shows [Cura] examples of:", "* Outer shell speed: 15mm/s * Inner shell speed: 30mm/s", "settings to use, especially ones which can speed up printing", "are there any other measures which I can take in", "speed up prints for the Monoprice Select IIIP Plus printer?", "of: * Print speed: 50mm/s * Travel Speed: 80mm/s ", "IIIP Plus printer? The manual shows [Cura] examples of: ", "The manual shows [Cura] examples of: * Print speed: 50mm/s", "better settings to use, especially ones which can speed up", "Print speed: 50mm/s * Travel Speed: 80mm/s * Bottom Layer", "the Monoprice Select IIIP Plus printer? The manual shows [Cura]", "Bottom Layer Speed: 20mm/s * Infill Speed: 50mm/s * Outer", "Speed: 50mm/s * Outer shell speed: 15mm/s * Inner shell", "manual shows [Cura] examples of: * Print speed: 50mm/s ", "which can speed up printing time? Or are there any", "Layer Speed: 20mm/s Infill Speed: 50mm/s * Outer shell", "shows [Cura] examples of: * Print speed: 50mm/s * Travel", "* Travel Speed: 80mm/s * Bottom Layer Speed: 20mm/s ", "However, this doesn’t line up with their advertisements online of", "other measures which I can take in order to reduce", "80mm/s Bottom Layer Speed: 20mm/s * Infill Speed: 50mm/s", "speed: 50mm/s * Travel Speed: 80mm/s * Bottom Layer Speed:", "especially ones which can speed up printing time? Or are", "150mm/s printing speed. Are there better settings to use, especially", "line up with their advertisements online of a 150mm/s printing", "which I can take in order to reduce printing time", "speed: 30mm/s However, this doesn’t line up with their advertisements", "online of a 150mm/s printing speed. Are there better settings", "any other measures which I can take in order to", "up printing time? Or are there any other measures which", "Infill Speed: 50mm/s * Outer shell speed: 15mm/s * Inner", "* Bottom Layer Speed: 20mm/s * Infill Speed: 50mm/s ", "this doesn’t line up with their advertisements online of a", "15mm/s Inner shell speed: 30mm/s However, this doesn’t line", "Inner shell speed: 30mm/s However, this doesn’t line up with", "their advertisements online of a 150mm/s printing speed. Are there", "ones which can speed up printing time? Or are there", "shell speed: 15mm/s * Inner shell speed: 30mm/s However, this", "* Inner shell speed: 30mm/s However, this doesn’t line up", "Outer shell speed: 15mm/s * Inner shell speed: 30mm/s However,", "measures which I can take in order to reduce printing", "for the Monoprice Select IIIP Plus printer? The manual shows", "advertisements online of a 150mm/s printing speed. Are there better", "can speed up printing time? Or are there any other", "printing time? Or are there any other measures which I", "* Infill Speed: 50mm/s * Outer shell speed: 15mm/s *" ]
[ "here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should I change to print the part with", "part with hole properly? Is it a problem with machine", "The solid part (bottom section) printed well. [![enter image description", "What should I change to print the part with hole", "the solid properly which contain a hole (as in the", "properly? Is it a problem with machine or the design?", "problem with machine or the design? I am using Hydra", "a hole (as in the picture). The solid part (bottom", "change to print the part with hole properly? Is it", "solid properly which contain a hole (as in the picture).", "it a problem with machine or the design? I am", "to print the part with hole properly? Is it a", "(as in the picture). The solid part (bottom section) printed", "[![enter image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should I change to print", "print the part with hole properly? Is it a problem", "part (bottom section) printed well. [![enter image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What", "the picture). The solid part (bottom section) printed well. [![enter", "description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should I change to print the part", "contain a hole (as in the picture). The solid part", "image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should I change to print the", "the upper part of the solid properly which contain a", "a problem with machine or the design? I am using", "cannot generate the upper part of the solid properly which", "I cannot generate the upper part of the solid properly", "upper part of the solid properly which contain a hole", "the part with hole properly? Is it a problem with", "picture). The solid part (bottom section) printed well. [![enter image", "which contain a hole (as in the picture). The solid", "part of the solid properly which contain a hole (as", "(bottom section) printed well. [![enter image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should", "hole properly? Is it a problem with machine or the", "I change to print the part with hole properly? Is", "with hole properly? Is it a problem with machine or", "generate the upper part of the solid properly which contain", "hole (as in the picture). The solid part (bottom section)", "solid part (bottom section) printed well. [![enter image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg)", "should I change to print the part with hole properly?", "properly which contain a hole (as in the picture). The", "of the solid properly which contain a hole (as in", "Is it a problem with machine or the design? I", "with machine or the design? I am using Hydra 3D", "in the picture). The solid part (bottom section) printed well.", "section) printed well. [![enter image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should I", "printed well. [![enter image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should I change", "machine or the design? I am using Hydra 3D printer.", "well. [![enter image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should I change to" ]
[ "stepper motor 1.8 deg, set to 1/16 step. Mk7 direct", "drive. 38 teeth in extruder drive gear. I bought it", "Ramps 1.4 and would like to get answer on extrusion", "4000, 180 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 3, 45", "[this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are my current settings: ``` #define DEFAULT_AXIS_STEPS_PER_UNIT", "on extrusion in Marlin firmware. I have NEMA 17 stepper", "} ``` I am using ABS 1.75 filament and a", "it from [this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are my current settings: ```", "500, 3, 45 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100,", "would like to get answer on extrusion in Marlin firmware.", "to 1/16 step. Mk7 direct drive. 38 teeth in extruder", "#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 300 } ``` I", "Mk7 direct drive. 38 teeth in extruder drive gear. I", "300 } ``` I am using ABS 1.75 filament and", "drive gear. I bought it from [this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are", "1.8 deg, set to 1/16 step. Mk7 direct drive. 38", "DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 300 } ``` I am", "teeth in extruder drive gear. I bought it from [this", "direct drive. 38 teeth in extruder drive gear. I bought", "9000, 9000, 100, 300 } ``` I am using ABS", "1/16 step. Mk7 direct drive. 38 teeth in extruder drive", "I bought it from [this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are my current", "settings: ``` #define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80, 4000, 180 } #define", "DEFAULT_AXIS_STEPS_PER_UNIT { 80,80, 4000, 180 } #define DEFAULT_MAX_FEEDRATE { 500,", "180 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 3, 45 }", "current settings: ``` #define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80, 4000, 180 }", "38 teeth in extruder drive gear. I bought it from", "firmware. I have NEMA 17 stepper motor 1.8 deg, set", "extruder drive gear. I bought it from [this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here", "1.4 and would like to get answer on extrusion in", "are my current settings: ``` #define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80, 4000,", "I have NEMA 17 stepper motor 1.8 deg, set to", "step. Mk7 direct drive. 38 teeth in extruder drive gear.", "to get answer on extrusion in Marlin firmware. I have", "from [this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are my current settings: ``` #define", "} #define DEFAULT_MAX_FEEDRATE { 500, 500, 3, 45 } #define", "80,80, 4000, 180 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 3,", "{ 500, 500, 3, 45 } #define DEFAULT_MAX_ACCELERATION { 9000,", "get answer on extrusion in Marlin firmware. I have NEMA", "I am using ABS 1.75 filament and a 0.4 nozzle.", "17 stepper motor 1.8 deg, set to 1/16 step. Mk7", "have NEMA 17 stepper motor 1.8 deg, set to 1/16", "set to 1/16 step. Mk7 direct drive. 38 teeth in", "in Marlin firmware. I have NEMA 17 stepper motor 1.8", "{ 9000, 9000, 100, 300 } ``` I am using", "website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are my current settings: ``` #define DEFAULT_AXIS_STEPS_PER_UNIT {", "3, 45 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 300", "9000, 100, 300 } ``` I am using ABS 1.75", "deg, set to 1/16 step. Mk7 direct drive. 38 teeth", "bought it from [this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are my current settings:", "motor 1.8 deg, set to 1/16 step. Mk7 direct drive.", "} #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 300 } ```", "have Ramps 1.4 and would like to get answer on", "I have Ramps 1.4 and would like to get answer", "gear. I bought it from [this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are my", "``` #define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80, 4000, 180 } #define DEFAULT_MAX_FEEDRATE", "100, 300 } ``` I am using ABS 1.75 filament", "{ 80,80, 4000, 180 } #define DEFAULT_MAX_FEEDRATE { 500, 500,", "in extruder drive gear. I bought it from [this website](https://www.robotics.org.za/RDKIT-00?search=extru).", "#define DEFAULT_MAX_FEEDRATE { 500, 500, 3, 45 } #define DEFAULT_MAX_ACCELERATION", "DEFAULT_MAX_FEEDRATE { 500, 500, 3, 45 } #define DEFAULT_MAX_ACCELERATION {", "500, 500, 3, 45 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000,", "45 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 300 }", "and would like to get answer on extrusion in Marlin", "Here are my current settings: ``` #define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80,", "like to get answer on extrusion in Marlin firmware. I", "NEMA 17 stepper motor 1.8 deg, set to 1/16 step.", "Marlin firmware. I have NEMA 17 stepper motor 1.8 deg,", "my current settings: ``` #define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80, 4000, 180", "extrusion in Marlin firmware. I have NEMA 17 stepper motor", "#define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80, 4000, 180 } #define DEFAULT_MAX_FEEDRATE {", "answer on extrusion in Marlin firmware. I have NEMA 17", "``` I am using ABS 1.75 filament and a 0.4" ]
[ "be attached to the frame? I just want another set", "image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder - image#2\")](https://i.stack.imgur.com/VCDP6.jpg) [![Extruder - image#3](https://i.stack.imgur.com/1Z8C2m.jpg", "to have a longer hole so it can be attached", "time building a 3D printer (a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is", "building a 3D printer (a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is going", "part that does not have enough space to attach on", "have a longer hole so it can be attached to", "drill it to have a longer hole so it can", "so it can be attached to the frame? I just", "the frame? I just want another set of eyes to", "This is my first time building a 3D printer (a", "to the frame? I just want another set of eyes", "image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder - image#2\")](https://i.stack.imgur.com/VCDP6.jpg)", "first time building a 3D printer (a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything", "(a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is going fine except the \"extruder", "just want another set of eyes to look at it", "of eyes to look at it to make sure I'm", "crazy. [![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg", "\"extruder kit\" part that does not have enough space to", "not have enough space to attach on the frame. Should", "my first time building a 3D printer (a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\").", "Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is going fine except the \"extruder kit\" part", "I just want another set of eyes to look at", "have enough space to attach on the frame. Should I", "it to make sure I'm not crazy. [![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg", "on the frame. Should I drill it to have a", "kit\" part that does not have enough space to attach", "Everything is going fine except the \"extruder kit\" part that", "going fine except the \"extruder kit\" part that does not", "set of eyes to look at it to make sure", "a longer hole so it can be attached to the", "3D printer (a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is going fine except", "hole so it can be attached to the frame? I", "can be attached to the frame? I just want another", "attach on the frame. Should I drill it to have", "the \"extruder kit\" part that does not have enough space", "except the \"extruder kit\" part that does not have enough", "it can be attached to the frame? I just want", "[![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder", "a 3D printer (a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is going fine", "look at it to make sure I'm not crazy. [![Extruder", "at it to make sure I'm not crazy. [![Extruder -", "I drill it to have a longer hole so it", "space to attach on the frame. Should I drill it", "printer (a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is going fine except the", "sure I'm not crazy. [![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg)", "is my first time building a 3D printer (a \"[Creality", "another set of eyes to look at it to make", "does not have enough space to attach on the frame.", "it to have a longer hole so it can be", "\"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder - image#2\")](https://i.stack.imgur.com/VCDP6.jpg) [![Extruder", "attached to the frame? I just want another set of", "eyes to look at it to make sure I'm not", "- image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder - image#2\")](https://i.stack.imgur.com/VCDP6.jpg) [![Extruder -", "[![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder - image#2\")](https://i.stack.imgur.com/VCDP6.jpg) [![Extruder - image#3](https://i.stack.imgur.com/1Z8C2m.jpg \"Extruder", "- image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder - image#2\")](https://i.stack.imgur.com/VCDP6.jpg) [![Extruder - image#3](https://i.stack.imgur.com/1Z8C2m.jpg \"Extruder -", "to look at it to make sure I'm not crazy.", "to make sure I'm not crazy. [![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder", "image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder - image#2\")](https://i.stack.imgur.com/VCDP6.jpg) [![Extruder - image#3](https://i.stack.imgur.com/1Z8C2m.jpg \"Extruder - image#3\")](https://i.stack.imgur.com/1Z8C2.jpg)", "\"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is going fine except the \"extruder kit\"", "is going fine except the \"extruder kit\" part that does", "fine except the \"extruder kit\" part that does not have", "I'm not crazy. [![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder", "frame. Should I drill it to have a longer hole", "frame? I just want another set of eyes to look", "that does not have enough space to attach on the", "longer hole so it can be attached to the frame?", "- image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder -", "enough space to attach on the frame. Should I drill", "not crazy. [![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder -", "make sure I'm not crazy. [![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder -", "want another set of eyes to look at it to", "to attach on the frame. Should I drill it to", "the frame. Should I drill it to have a longer", "Should I drill it to have a longer hole so" ]
[ "comes from the LCD). If I search for \"Daylight resin\"", "Resin printer. I'm still learning and I found out that", "printer. I'm still learning and I found out that I", "at least white/black/transparent resin. Is it the only option we", "seem to be good too; however, I'm trying to search", "still learning and I found out that I need daylight", "Google, the only \"useful\" result I find is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0).", "search for alternatives. I'm not interested in something cheaper, I'd", "and I found out that I need daylight resin (which", "more colors. Photocentric's hard resin only comes in cream/green/gray colors.", "to choose a resin which has more colors. Photocentric's hard", "has more colors. Photocentric's hard resin only comes in cream/green/gray", "on Google, the only \"useful\" result I find is for", "the only option we have? Are there any other manufacturer", "like to choose a resin which has more colors. Photocentric's", "to make an LCD Resin printer. I'm still learning and", "search for \"Daylight resin\" on Google, the only \"useful\" result", "I'm still learning and I found out that I need", "Photocentric's hard resin only comes in cream/green/gray colors. I would", "only option we have? Are there any other manufacturer out", "I search for \"Daylight resin\" on Google, the only \"useful\"", "learning and I found out that I need daylight resin", "colors. Photocentric's hard resin only comes in cream/green/gray colors. I", "hardens when white light comes from the LCD). If I", "the LCD). If I search for \"Daylight resin\" on Google,", "resin\" on Google, the only \"useful\" result I find is", "resin only comes in cream/green/gray colors. I would need at", "daylight resin (which hardens when white light comes from the", "in cream/green/gray colors. I would need at least white/black/transparent resin.", "least white/black/transparent resin. Is it the only option we have?", "result I find is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells", "\"useful\" result I find is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric", "something cheaper, I'd like to choose a resin which has", "other manufacturer out there which produces Daylight resin/LCD-hardening resin with", "out that I need daylight resin (which hardens when white", "to be good too; however, I'm trying to search for", "I'm trying to search for alternatives. I'm not interested in", "find is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells Daylight resins", "an LCD Resin printer. I'm still learning and I found", "found out that I need daylight resin (which hardens when", "however, I'm trying to search for alternatives. I'm not interested", "the prices seem to be good too; however, I'm trying", "Is it the only option we have? Are there any", "If I search for \"Daylight resin\" on Google, the only", "Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells Daylight resins and the prices seem to", "trying to search for alternatives. I'm not interested in something", "hard resin only comes in cream/green/gray colors. I would need", "it the only option we have? Are there any other", "I would need at least white/black/transparent resin. Is it the", "which produces Daylight resin/LCD-hardening resin with a variety of colors?", "resin (which hardens when white light comes from the LCD).", "alternatives. I'm not interested in something cheaper, I'd like to", "when white light comes from the LCD). If I search", "which has more colors. Photocentric's hard resin only comes in", "planning to make an LCD Resin printer. I'm still learning", "the only \"useful\" result I find is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric", "too; however, I'm trying to search for alternatives. I'm not", "I'm not interested in something cheaper, I'd like to choose", "cheaper, I'd like to choose a resin which has more", "need at least white/black/transparent resin. Is it the only option", "we have? Are there any other manufacturer out there which", "for \"Daylight resin\" on Google, the only \"useful\" result I", "LCD). If I search for \"Daylight resin\" on Google, the", "\"Daylight resin\" on Google, the only \"useful\" result I find", "white/black/transparent resin. Is it the only option we have? Are", "Daylight resins and the prices seem to be good too;", "interested in something cheaper, I'd like to choose a resin", "I found out that I need daylight resin (which hardens", "comes in cream/green/gray colors. I would need at least white/black/transparent", "only comes in cream/green/gray colors. I would need at least", "white light comes from the LCD). If I search for", "not interested in something cheaper, I'd like to choose a", "have? Are there any other manufacturer out there which produces", "Are there any other manufacturer out there which produces Daylight", "light comes from the LCD). If I search for \"Daylight", "resin which has more colors. Photocentric's hard resin only comes", "choose a resin which has more colors. Photocentric's hard resin", "need daylight resin (which hardens when white light comes from", "Photocentric sells Daylight resins and the prices seem to be", "there any other manufacturer out there which produces Daylight resin/LCD-hardening", "resins and the prices seem to be good too; however,", "is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells Daylight resins and", "sells Daylight resins and the prices seem to be good", "only \"useful\" result I find is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg)", "I find is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells Daylight", "to search for alternatives. I'm not interested in something cheaper,", "and the prices seem to be good too; however, I'm", "that I need daylight resin (which hardens when white light", "for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells Daylight resins and the", "colors. I would need at least white/black/transparent resin. Is it", "in something cheaper, I'd like to choose a resin which", "I'm planning to make an LCD Resin printer. I'm still", "there which produces Daylight resin/LCD-hardening resin with a variety of", "(which hardens when white light comes from the LCD). If", "a resin which has more colors. Photocentric's hard resin only", "[![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells Daylight resins and the prices seem", "good too; however, I'm trying to search for alternatives. I'm", "option we have? Are there any other manufacturer out there", "make an LCD Resin printer. I'm still learning and I", "LCD Resin printer. I'm still learning and I found out", "I need daylight resin (which hardens when white light comes", "[Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells Daylight resins and the prices", "cream/green/gray colors. I would need at least white/black/transparent resin. Is", "from the LCD). If I search for \"Daylight resin\" on", "prices seem to be good too; however, I'm trying to", "be good too; however, I'm trying to search for alternatives.", "resin. Is it the only option we have? Are there", "would need at least white/black/transparent resin. Is it the only", "for alternatives. I'm not interested in something cheaper, I'd like", "any other manufacturer out there which produces Daylight resin/LCD-hardening resin", "out there which produces Daylight resin/LCD-hardening resin with a variety", "manufacturer out there which produces Daylight resin/LCD-hardening resin with a", "I'd like to choose a resin which has more colors." ]
[ "very thin hair like extrusions and eventually stopping completely The", "a problem in the print with a few of the", "as the filament seemed too fluid as I could easily", "the filament with very little effort. So I reduced the", "lines being missing before it started extruding normally again I", "- or is that normal or at least have people", "temperatures, is the extremely runny filament I saw at 200", "with the final part of the succesful print consisting of", "seemed better However after a time - I noticed on", "- however the issue continued intermittently however I left it", "I returned the head had become blocked with the final", "an ANET A2 Prusa - which I've setup and performed", "just the gear skipped on the filament It appeared to", "thin hair like extrusions and eventually stopping completely The head", "effort. So I reduced the head temperature to 195 and", "on a longer print that the feeding was sometimes failing", "flow of filament should look like or if my decription", "I have an ANET A2 Prusa - which I've setup", "seem to make a good enough print Does anyone have", "of molten plastic by manually pushing the filament with very", "after a time - I noticed on a longer print", "printing but then slowly start failing until the head becomes", "the filament look when the head is at the correct", "look when the head is at the correct temperatures, is", "a large spurt of molten plastic by manually pushing the", "the temperature - as the filament seemed too fluid as", "print Does anyone have experience of why it can seem", ", before I reduced the temperature, I doubled the skirt", "I've been adjusting settings - In particular the temperature -", "the filament seemed too fluid as I could easily cause", "not appear to slip back just the gear skipped on", "to make a good enough print Does anyone have experience", "of the lines being missing before it started extruding normally", "obviously too hot - or is that normal or at", "normal or at least have people seen it looking like", "need to clean it out So my questions are -", "like extrusions and eventually stopping completely The head is flooded", "the temperature, I doubled the skirt and that seem to", "and all seemed better However after a time - I", "returned the head had become blocked with the final part", "better However after a time - I noticed on a", "back just the gear skipped on the filament It appeared", "- how runny should the filament look when the head", "when successfully printing? Initially , before I reduced the temperature,", "I doubled the skirt and that seem to make a", "the gear skipped on the filament It appeared to cause", "on and they have various problems with the quality. I'm", "print that the feeding was sometimes failing with the filament", "to clean it out So my questions are - how", "- as the filament seemed too fluid as I could", "and I need to clean it out So my questions", "Prusa - which I've setup and performed a few prints", "successfully printing? Initially , before I reduced the temperature, I", "- which I've setup and performed a few prints on", "extruding normally again I increased the temperature back to 200", "print consisting of very thin hair like extrusions and eventually", "slip back just the gear skipped on the filament It", "few of the lines being missing before it started extruding", "eventually stopping completely The head is flooded and I need", "people seen it looking like that when successfully printing? Initially", "a good enough print Does anyone have experience of why", "was sometimes failing with the filament jerking back as the", "head is at the correct temperatures, is the extremely runny", "that seem to make a good enough print Does anyone", "a few of the lines being missing before it started", "printing? Initially , before I reduced the temperature, I doubled", "why it can seem to be printing but then slowly", "seemed too fluid as I could easily cause a large", "normally again I increased the temperature back to 200 -", "and that seem to make a good enough print Does", "seem to be printing but then slowly start failing until", "filament jerking back as the feeder slipped off it The", "I increased the temperature back to 200 - however the", "how runny should the filament look when the head is", "my decription triggers someone I've been adjusting settings - In", "in the print with a few of the lines being", "however the issue continued intermittently however I left it and", "continued intermittently however I left it and when I returned", "at the correct temperatures, is the extremely runny filament I", "large spurt of molten plastic by manually pushing the filament", "the feeder slipped off it The stepper did not appear", "are - how runny should the filament look when the", "cause a large spurt of molten plastic by manually pushing", "to slip back just the gear skipped on the filament", "become blocked with the final part of the succesful print", "have people seen it looking like that when successfully printing?", "they have various problems with the quality. I'm after some", "seen it looking like that when successfully printing? Initially ,", "of why it can seem to be printing but then", "issue continued intermittently however I left it and when I", "longer print that the feeding was sometimes failing with the", "of very thin hair like extrusions and eventually stopping completely", "quality. I'm after some specific experience on what the flow", "feeding was sometimes failing with the filament jerking back as", "appear to slip back just the gear skipped on the", "hot - or is that normal or at least have", "at least have people seen it looking like that when", "and they have various problems with the quality. I'm after", "correct temperatures, is the extremely runny filament I saw at", "hair like extrusions and eventually stopping completely The head is", "it looking like that when successfully printing? Initially , before", "with the quality. I'm after some specific experience on what", "back to 200 - however the issue continued intermittently however", "left it and when I returned the head had become", "is flooded and I need to clean it out So", "I saw at 200 obviously too hot - or is", "have an ANET A2 Prusa - which I've setup and", "I'm after some specific experience on what the flow of", "So I reduced the head temperature to 195 and all", "it started extruding normally again I increased the temperature back", "but then slowly start failing until the head becomes blocked?", "consisting of very thin hair like extrusions and eventually stopping", "jerking back as the feeder slipped off it The stepper", "filament should look like or if my decription triggers someone", "sometimes failing with the filament jerking back as the feeder", "The head is flooded and I need to clean it", "the filament It appeared to cause a problem in the", "runny filament I saw at 200 obviously too hot -", "the issue continued intermittently however I left it and when", "settings - In particular the temperature - as the filament", "the head temperature to 195 and all seemed better However", "back as the feeder slipped off it The stepper did", "intermittently however I left it and when I returned the", "experience of why it can seem to be printing but", "the head had become blocked with the final part of", "some specific experience on what the flow of filament should", "slipped off it The stepper did not appear to slip", "had become blocked with the final part of the succesful", "with the filament jerking back as the feeder slipped off", "before I reduced the temperature, I doubled the skirt and", "good enough print Does anyone have experience of why it", "should look like or if my decription triggers someone I've", "like or if my decription triggers someone I've been adjusting", "at 200 obviously too hot - or is that normal", "like that when successfully printing? Initially , before I reduced", "have experience of why it can seem to be printing", "the extremely runny filament I saw at 200 obviously too", "200 obviously too hot - or is that normal or", "it and when I returned the head had become blocked", "to be printing but then slowly start failing until the", "experience on what the flow of filament should look like", "filament with very little effort. So I reduced the head", "and when I returned the head had become blocked with", "too fluid as I could easily cause a large spurt", "however I left it and when I returned the head", "easily cause a large spurt of molten plastic by manually", "filament seemed too fluid as I could easily cause a", "little effort. So I reduced the head temperature to 195", "it The stepper did not appear to slip back just", "the flow of filament should look like or if my", "the quality. I'm after some specific experience on what the", "triggers someone I've been adjusting settings - In particular the", "that the feeding was sometimes failing with the filament jerking", "stepper did not appear to slip back just the gear", "the final part of the succesful print consisting of very", "out So my questions are - how runny should the", "part of the succesful print consisting of very thin hair", "extremely runny filament I saw at 200 obviously too hot", "setup and performed a few prints on and they have", "blocked with the final part of the succesful print consisting", "195 and all seemed better However after a time -", "- In particular the temperature - as the filament seemed", "very little effort. So I reduced the head temperature to", "skipped on the filament It appeared to cause a problem", "I left it and when I returned the head had", "completely The head is flooded and I need to clean", "too hot - or is that normal or at least", "clean it out So my questions are - how runny", "head temperature to 195 and all seemed better However after", "is at the correct temperatures, is the extremely runny filament", "I reduced the temperature, I doubled the skirt and that", "by manually pushing the filament with very little effort. So", "I could easily cause a large spurt of molten plastic", "off it The stepper did not appear to slip back", "It appeared to cause a problem in the print with", "all seemed better However after a time - I noticed", "started extruding normally again I increased the temperature back to", "of filament should look like or if my decription triggers", "the filament jerking back as the feeder slipped off it", "of the succesful print consisting of very thin hair like", "succesful print consisting of very thin hair like extrusions and", "that normal or at least have people seen it looking", "- I noticed on a longer print that the feeding", "filament It appeared to cause a problem in the print", "A2 Prusa - which I've setup and performed a few", "problems with the quality. I'm after some specific experience on", "I need to clean it out So my questions are", "or if my decription triggers someone I've been adjusting settings", "is the extremely runny filament I saw at 200 obviously", "I've setup and performed a few prints on and they", "my questions are - how runny should the filament look", "filament I saw at 200 obviously too hot - or", "head had become blocked with the final part of the", "did not appear to slip back just the gear skipped", "particular the temperature - as the filament seemed too fluid", "temperature back to 200 - however the issue continued intermittently", "questions are - how runny should the filament look when", "manually pushing the filament with very little effort. So I", "pushing the filament with very little effort. So I reduced", "200 - however the issue continued intermittently however I left", "ANET A2 Prusa - which I've setup and performed a", "print with a few of the lines being missing before", "head is flooded and I need to clean it out", "looking like that when successfully printing? Initially , before I", "doubled the skirt and that seem to make a good", "look like or if my decription triggers someone I've been", "it out So my questions are - how runny should", "could easily cause a large spurt of molten plastic by", "when I returned the head had become blocked with the", "on what the flow of filament should look like or", "The stepper did not appear to slip back just the", "someone I've been adjusting settings - In particular the temperature", "I reduced the head temperature to 195 and all seemed", "being missing before it started extruding normally again I increased", "fluid as I could easily cause a large spurt of", "increased the temperature back to 200 - however the issue", "to cause a problem in the print with a few", "stopping completely The head is flooded and I need to", "filament look when the head is at the correct temperatures,", "time - I noticed on a longer print that the", "that when successfully printing? Initially , before I reduced the", "as I could easily cause a large spurt of molten", "the temperature back to 200 - however the issue continued", "failing with the filament jerking back as the feeder slipped", "skirt and that seem to make a good enough print", "appeared to cause a problem in the print with a", "or at least have people seen it looking like that", "I noticed on a longer print that the feeding was", "a longer print that the feeding was sometimes failing with", "molten plastic by manually pushing the filament with very little", "after some specific experience on what the flow of filament", "decription triggers someone I've been adjusting settings - In particular", "saw at 200 obviously too hot - or is that", "or is that normal or at least have people seen", "spurt of molten plastic by manually pushing the filament with", "when the head is at the correct temperatures, is the", "be printing but then slowly start failing until the head", "missing before it started extruding normally again I increased the", "and eventually stopping completely The head is flooded and I", "a time - I noticed on a longer print that", "if my decription triggers someone I've been adjusting settings -", "as the feeder slipped off it The stepper did not", "temperature - as the filament seemed too fluid as I", "final part of the succesful print consisting of very thin", "cause a problem in the print with a few of", "extrusions and eventually stopping completely The head is flooded and", "least have people seen it looking like that when successfully", "a few prints on and they have various problems with", "noticed on a longer print that the feeding was sometimes", "enough print Does anyone have experience of why it can", "to 200 - however the issue continued intermittently however I", "performed a few prints on and they have various problems", "to 195 and all seemed better However after a time", "Does anyone have experience of why it can seem to", "can seem to be printing but then slowly start failing", "gear skipped on the filament It appeared to cause a", "various problems with the quality. I'm after some specific experience", "temperature, I doubled the skirt and that seem to make", "and performed a few prints on and they have various", "problem in the print with a few of the lines", "make a good enough print Does anyone have experience of", "the succesful print consisting of very thin hair like extrusions", "anyone have experience of why it can seem to be", "what the flow of filament should look like or if", "flooded and I need to clean it out So my", "temperature to 195 and all seemed better However after a", "plastic by manually pushing the filament with very little effort.", "few prints on and they have various problems with the", "is that normal or at least have people seen it", "reduced the head temperature to 195 and all seemed better", "the correct temperatures, is the extremely runny filament I saw", "prints on and they have various problems with the quality.", "runny should the filament look when the head is at", "In particular the temperature - as the filament seemed too", "with very little effort. So I reduced the head temperature", "adjusting settings - In particular the temperature - as the", "before it started extruding normally again I increased the temperature", "reduced the temperature, I doubled the skirt and that seem", "again I increased the temperature back to 200 - however", "However after a time - I noticed on a longer", "should the filament look when the head is at the", "the print with a few of the lines being missing", "it can seem to be printing but then slowly start", "Initially , before I reduced the temperature, I doubled the", "specific experience on what the flow of filament should look", "the skirt and that seem to make a good enough", "feeder slipped off it The stepper did not appear to", "the feeding was sometimes failing with the filament jerking back", "which I've setup and performed a few prints on and", "been adjusting settings - In particular the temperature - as", "on the filament It appeared to cause a problem in", "the head is at the correct temperatures, is the extremely", "with a few of the lines being missing before it", "So my questions are - how runny should the filament", "the lines being missing before it started extruding normally again", "have various problems with the quality. I'm after some specific" ]
[ "I have the printer in my downstairs study and if", "don't want it keep him awake. I've seen there are", "paving block but I'm not sure how effective that would", "having a concrete block put on it. I was wondering", "seen there are noise reduction feet available on Thingiverse but", "well with having a concrete block put on it. I", "reduce the amount of noise produced by my CR-10. I", "my son's bedroom and I don't want it keep him", "can result quite significant vibrations of the printer itself, which", "looking for methods to reduce the amount of noise produced", "print job, you can hear it upstairs in my son's", "the amount of noise produced by my CR-10. I have", "hear it upstairs in my son's bedroom and I don't", "in my downstairs study and if I'm doing a long", "available on Thingiverse but apparently these can result quite significant", "with having a concrete block put on it. I was", "I am looking for methods to reduce the amount of", "if I'm doing a long print job, you can hear", "guy using a paving block but I'm not sure how", "not sure how effective that would be and also don't", "apparently these can result quite significant vibrations of the printer", "also don't think my cheap Ikea desk would cope very", "reduction feet available on Thingiverse but apparently these can result", "carpet. Has anyone tried this or have any other suggestions?", "my downstairs study and if I'm doing a long print", "long print job, you can hear it upstairs in my", "about trying an off-cut of carpet. Has anyone tried this", "downstairs study and if I'm doing a long print job,", "to reduce the amount of noise produced by my CR-10.", "print. I've also seen one guy using a paving block", "awake. I've seen there are noise reduction feet available on", "concrete block put on it. I was wondering about trying", "it keep him awake. I've seen there are noise reduction", "on Thingiverse but apparently these can result quite significant vibrations", "don't think my cheap Ikea desk would cope very well", "by my CR-10. I have the printer in my downstairs", "but I'm not sure how effective that would be and", "Ikea desk would cope very well with having a concrete", "block put on it. I was wondering about trying an", "CR-10. I have the printer in my downstairs study and", "put on it. I was wondering about trying an off-cut", "am looking for methods to reduce the amount of noise", "keep him awake. I've seen there are noise reduction feet", "in my son's bedroom and I don't want it keep", "doing a long print job, you can hear it upstairs", "that would be and also don't think my cheap Ikea", "a paving block but I'm not sure how effective that", "amount of noise produced by my CR-10. I have the", "and if I'm doing a long print job, you can", "printer in my downstairs study and if I'm doing a", "noise reduction feet available on Thingiverse but apparently these can", "printer itself, which could mess up the print. I've also", "I don't want it keep him awake. I've seen there", "son's bedroom and I don't want it keep him awake.", "I've also seen one guy using a paving block but", "significant vibrations of the printer itself, which could mess up", "produced by my CR-10. I have the printer in my", "of the printer itself, which could mess up the print.", "it upstairs in my son's bedroom and I don't want", "these can result quite significant vibrations of the printer itself,", "be and also don't think my cheap Ikea desk would", "very well with having a concrete block put on it.", "want it keep him awake. I've seen there are noise", "I'm doing a long print job, you can hear it", "have the printer in my downstairs study and if I'm", "him awake. I've seen there are noise reduction feet available", "was wondering about trying an off-cut of carpet. Has anyone", "of carpet. Has anyone tried this or have any other", "methods to reduce the amount of noise produced by my", "a concrete block put on it. I was wondering about", "would cope very well with having a concrete block put", "you can hear it upstairs in my son's bedroom and", "I was wondering about trying an off-cut of carpet. Has", "I've seen there are noise reduction feet available on Thingiverse", "I'm not sure how effective that would be and also", "and also don't think my cheap Ikea desk would cope", "of noise produced by my CR-10. I have the printer", "seen one guy using a paving block but I'm not", "which could mess up the print. I've also seen one", "could mess up the print. I've also seen one guy", "Thingiverse but apparently these can result quite significant vibrations of", "my CR-10. I have the printer in my downstairs study", "a long print job, you can hear it upstairs in", "off-cut of carpet. Has anyone tried this or have any", "sure how effective that would be and also don't think", "would be and also don't think my cheap Ikea desk", "cheap Ikea desk would cope very well with having a", "but apparently these can result quite significant vibrations of the", "cope very well with having a concrete block put on", "the print. I've also seen one guy using a paving", "one guy using a paving block but I'm not sure", "desk would cope very well with having a concrete block", "the printer in my downstairs study and if I'm doing", "there are noise reduction feet available on Thingiverse but apparently", "quite significant vibrations of the printer itself, which could mess", "an off-cut of carpet. Has anyone tried this or have", "result quite significant vibrations of the printer itself, which could", "vibrations of the printer itself, which could mess up the", "using a paving block but I'm not sure how effective", "itself, which could mess up the print. I've also seen", "my cheap Ikea desk would cope very well with having", "noise produced by my CR-10. I have the printer in", "can hear it upstairs in my son's bedroom and I", "think my cheap Ikea desk would cope very well with", "wondering about trying an off-cut of carpet. Has anyone tried", "block but I'm not sure how effective that would be", "the printer itself, which could mess up the print. I've", "for methods to reduce the amount of noise produced by", "how effective that would be and also don't think my", "study and if I'm doing a long print job, you", "bedroom and I don't want it keep him awake. I've", "up the print. I've also seen one guy using a", "are noise reduction feet available on Thingiverse but apparently these", "effective that would be and also don't think my cheap", "and I don't want it keep him awake. I've seen", "also seen one guy using a paving block but I'm", "job, you can hear it upstairs in my son's bedroom", "it. I was wondering about trying an off-cut of carpet.", "mess up the print. I've also seen one guy using", "trying an off-cut of carpet. Has anyone tried this or", "feet available on Thingiverse but apparently these can result quite", "upstairs in my son's bedroom and I don't want it", "on it. I was wondering about trying an off-cut of" ]
[ "(and most expensive) bits is the cabaça, a hollow gourd", "to our local Maker Lab and have them scan and", "for Capoeira. One of the most fragile (and most expensive)", "it that it would work? My fear is that the", "of the most fragile (and most expensive) bits is the", "One of the most fragile (and most expensive) bits is", "a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not very familiar with the qualities", "that it would work? My fear is that the plastic", "that the plastic would be too sound deadening. If you", "print a copy, how likely is it that it would", "is the cabaça, a hollow gourd used as a resonator.", "parallel, imagine the body of a guitar. That's a resonating", "likely is it that it would work? My fear is", "the most fragile (and most expensive) bits is the cabaça,", "resin used for 3d printing. If I were to take", "sound deadening. If you want a less exotic parallel, imagine", "deadening. If you want a less exotic parallel, imagine the", "the resin used for 3d printing. If I were to", "want a less exotic parallel, imagine the body of a", "them scan and print a copy, how likely is it", "too sound deadening. If you want a less exotic parallel,", "this to our local Maker Lab and have them scan", "Lab and have them scan and print a copy, how", "a less exotic parallel, imagine the body of a guitar.", "a hollow gourd used as a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not", "expensive) bits is the cabaça, a hollow gourd used as", "used as a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not very familiar with", "for 3d printing. If I were to take this to", "plastic would be too sound deadening. If you want a", "Maker Lab and have them scan and print a copy,", "If I were to take this to our local Maker", "and have them scan and print a copy, how likely", "is that the plastic would be too sound deadening. If", "copy, how likely is it that it would work? My", "imagine the body of a guitar. That's a resonating chamber.", "If you want a less exotic parallel, imagine the body", "our local Maker Lab and have them scan and print", "Capoeira. One of the most fragile (and most expensive) bits", "you want a less exotic parallel, imagine the body of", "very familiar with the qualities of the resin used for", "qualities of the resin used for 3d printing. If I", "a [berimbau](https://en.m.wikipedia.org/wiki/Berimbau) for Capoeira. One of the most fragile (and", "hollow gourd used as a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not very", "fragile (and most expensive) bits is the cabaça, a hollow", "how likely is it that it would work? My fear", "would be too sound deadening. If you want a less", "gourd used as a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not very familiar", "[berimbau](https://en.m.wikipedia.org/wiki/Berimbau) for Capoeira. One of the most fragile (and most", "less exotic parallel, imagine the body of a guitar. That's", "scan and print a copy, how likely is it that", "most fragile (and most expensive) bits is the cabaça, a", "the qualities of the resin used for 3d printing. If", "with the qualities of the resin used for 3d printing.", "cabaça, a hollow gourd used as a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm", "used for 3d printing. If I were to take this", "My fear is that the plastic would be too sound", "work? My fear is that the plastic would be too", "I play a [berimbau](https://en.m.wikipedia.org/wiki/Berimbau) for Capoeira. One of the most", "is it that it would work? My fear is that", "not very familiar with the qualities of the resin used", "the plastic would be too sound deadening. If you want", "exotic parallel, imagine the body of a guitar. That's a", "play a [berimbau](https://en.m.wikipedia.org/wiki/Berimbau) for Capoeira. One of the most fragile", "3d printing. If I were to take this to our", "bits is the cabaça, a hollow gourd used as a", "would work? My fear is that the plastic would be", "as a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not very familiar with the", "of the resin used for 3d printing. If I were", "have them scan and print a copy, how likely is", "![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not very familiar with the qualities of the", "a copy, how likely is it that it would work?", "take this to our local Maker Lab and have them", "fear is that the plastic would be too sound deadening.", "most expensive) bits is the cabaça, a hollow gourd used", "it would work? My fear is that the plastic would", "to take this to our local Maker Lab and have", "be too sound deadening. If you want a less exotic", "were to take this to our local Maker Lab and", "local Maker Lab and have them scan and print a", "the cabaça, a hollow gourd used as a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg)", "and print a copy, how likely is it that it", "I were to take this to our local Maker Lab", "I'm not very familiar with the qualities of the resin", "printing. If I were to take this to our local", "familiar with the qualities of the resin used for 3d", "resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not very familiar with the qualities of" ]
[ "the bed from 220 mm x 220 mm to 220", "220 mm x 300 mm. For now, I will keep", "mm. For now, I will keep the existing bed and", "the original bed. Right now I only plan on running", "heating the bed. How thick does the aluminum sheet need", "mm to 220 mm x 300 mm. For now, I", "but, I do plan on heating the bed. How thick", "plan on running PLA; but, I do plan on heating", "of the original bed. Right now I only plan on", "the existing bed and add and aluminum sheet on top.", "FDM RepRap printer. I am extending the bed from 220", "bed of my TronXY X3 FDM RepRap printer. I am", "I am extending the bed of my TronXY X3 FDM", "RepRap printer. I am extending the bed from 220 mm", "am extending the bed from 220 mm x 220 mm", "on top. That leaves 40mm on front and back of", "will keep the existing bed and add and aluminum sheet", "plan on heating the bed. How thick does the aluminum", "300 mm. For now, I will keep the existing bed", "bed. How thick does the aluminum sheet need to be?", "existing bed and add and aluminum sheet on top. That", "and aluminum sheet on top. That leaves 40mm on front", "X3 FDM RepRap printer. I am extending the bed from", "TronXY X3 FDM RepRap printer. I am extending the bed", "on heating the bed. How thick does the aluminum sheet", "add and aluminum sheet on top. That leaves 40mm on", "bed. Right now I only plan on running PLA; but,", "aluminum sheet on top. That leaves 40mm on front and", "I do plan on heating the bed. How thick does", "now I only plan on running PLA; but, I do", "of my TronXY X3 FDM RepRap printer. I am extending", "now, I will keep the existing bed and add and", "leaves 40mm on front and back of the original bed.", "mm x 300 mm. For now, I will keep the", "printer. I am extending the bed from 220 mm x", "do plan on heating the bed. How thick does the", "keep the existing bed and add and aluminum sheet on", "bed and add and aluminum sheet on top. That leaves", "sheet on top. That leaves 40mm on front and back", "and back of the original bed. Right now I only", "on front and back of the original bed. Right now", "top. That leaves 40mm on front and back of the", "original bed. Right now I only plan on running PLA;", "extending the bed from 220 mm x 220 mm to", "For now, I will keep the existing bed and add", "my TronXY X3 FDM RepRap printer. I am extending the", "bed from 220 mm x 220 mm to 220 mm", "220 mm to 220 mm x 300 mm. For now,", "40mm on front and back of the original bed. Right", "running PLA; but, I do plan on heating the bed.", "the bed of my TronXY X3 FDM RepRap printer. I", "to 220 mm x 300 mm. For now, I will", "I will keep the existing bed and add and aluminum", "from 220 mm x 220 mm to 220 mm x", "on running PLA; but, I do plan on heating the", "the bed. How thick does the aluminum sheet need to", "I only plan on running PLA; but, I do plan", "x 300 mm. For now, I will keep the existing", "extending the bed of my TronXY X3 FDM RepRap printer.", "220 mm x 220 mm to 220 mm x 300", "x 220 mm to 220 mm x 300 mm. For", "That leaves 40mm on front and back of the original", "Right now I only plan on running PLA; but, I", "front and back of the original bed. Right now I", "only plan on running PLA; but, I do plan on", "PLA; but, I do plan on heating the bed. How", "back of the original bed. Right now I only plan", "mm x 220 mm to 220 mm x 300 mm.", "am extending the bed of my TronXY X3 FDM RepRap", "I am extending the bed from 220 mm x 220", "and add and aluminum sheet on top. That leaves 40mm" ]
[ "mesh to solid shows that in various tools such as", "shape of half a sphere. I want to easily convert", "is created manually by visually comparing to the mesh or", "subtracted from it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\") Googling", "will be subtracted from it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion", "to be generated/calculated by the software. Source file format is", "of half a sphere. I want to easily convert it", "be generated/calculated by the software. Source file format is of", "by visually comparing to the mesh or the cross section", "looking for the minimum enclosing sphere and box to be", "perfect shape of half a sphere. I want to easily", "to the containing sphere solid and a box solid that", "it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\") Googling mesh to", "process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\") Googling mesh to solid shows", "solid and a box solid that will be subtracted from", "enclosing sphere and box to be generated/calculated by the software.", "box solid that will be subtracted from it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png", "to easily convert it to the containing sphere solid and", "half a sphere. I want to easily convert it to", "sphere. I want to easily convert it to the containing", "created manually by visually comparing to the mesh or the", "visually comparing to the mesh or the cross section when", "tools such as 3ds Max, Fusion, etc., manual approximation of", "that in various tools such as 3ds Max, Fusion, etc.,", "the cross section when creating the solid but I am", "shows that in various tools such as 3ds Max, Fusion,", "that will be subtracted from it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png", "such as 3ds Max, Fusion, etc., manual approximation of where", "be subtracted from it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")", "but I am looking for the minimum enclosing sphere and", "a box solid that will be subtracted from it. [![Conversion", "3ds Max, Fusion, etc., manual approximation of where the sphere", "go is created manually by visually comparing to the mesh", "mesh of a bowl that has the perfect shape of", "is of course not an issue, it can be any", "solid shows that in various tools such as 3ds Max,", "Max, Fusion, etc., manual approximation of where the sphere might", "process\") Googling mesh to solid shows that in various tools", "has the perfect shape of half a sphere. I want", "have a mesh of a bowl that has the perfect", "Fusion, etc., manual approximation of where the sphere might go", "software. Source file format is of course not an issue,", "to the mesh or the cross section when creating the", "want to easily convert it to the containing sphere solid", "a mesh of a bowl that has the perfect shape", "might go is created manually by visually comparing to the", "the sphere might go is created manually by visually comparing", "various tools such as 3ds Max, Fusion, etc., manual approximation", "[![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\") Googling mesh to solid", "\"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\") Googling mesh to solid shows that", "generated/calculated by the software. Source file format is of course", "the perfect shape of half a sphere. I want to", "bowl that has the perfect shape of half a sphere.", "\"Conversion process\") Googling mesh to solid shows that in various", "the containing sphere solid and a box solid that will", "where the sphere might go is created manually by visually", "from it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\") Googling mesh", "or the cross section when creating the solid but I", "process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\") Googling mesh to solid shows that in", "that has the perfect shape of half a sphere. I", "sphere might go is created manually by visually comparing to", "of a bowl that has the perfect shape of half", "etc., manual approximation of where the sphere might go is", "manual approximation of where the sphere might go is created", "cross section when creating the solid but I am looking", "the mesh or the cross section when creating the solid", "Source file format is of course not an issue, it", "it to the containing sphere solid and a box solid", "Googling mesh to solid shows that in various tools such", "and a box solid that will be subtracted from it.", "I am looking for the minimum enclosing sphere and box", "of course not an issue, it can be any known", "containing sphere solid and a box solid that will be", "section when creating the solid but I am looking for", "I want to easily convert it to the containing sphere", "sphere and box to be generated/calculated by the software. Source", "a sphere. I want to easily convert it to the", "file format is of course not an issue, it can", "box to be generated/calculated by the software. Source file format", "I have a mesh of a bowl that has the", "of where the sphere might go is created manually by", "course not an issue, it can be any known mesh", "easily convert it to the containing sphere solid and a", "in various tools such as 3ds Max, Fusion, etc., manual", "creating the solid but I am looking for the minimum", "a bowl that has the perfect shape of half a", "comparing to the mesh or the cross section when creating", "sphere solid and a box solid that will be subtracted", "format is of course not an issue, it can be", "manually by visually comparing to the mesh or the cross", "the software. Source file format is of course not an", "when creating the solid but I am looking for the", "not an issue, it can be any known mesh file.", "as 3ds Max, Fusion, etc., manual approximation of where the", "solid but I am looking for the minimum enclosing sphere", "to solid shows that in various tools such as 3ds", "solid that will be subtracted from it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion", "am looking for the minimum enclosing sphere and box to", "the minimum enclosing sphere and box to be generated/calculated by", "mesh or the cross section when creating the solid but", "for the minimum enclosing sphere and box to be generated/calculated", "convert it to the containing sphere solid and a box", "and box to be generated/calculated by the software. Source file", "by the software. Source file format is of course not", "the solid but I am looking for the minimum enclosing", "approximation of where the sphere might go is created manually", "minimum enclosing sphere and box to be generated/calculated by the" ]
[ "the algorithm/principles behind the estimates that the slicing softwares provide.", "the slicing softwares provide. Is there a standard technique behind", "am curious about the algorithm/principles behind the estimates that the", "algorithm/principles behind the estimates that the slicing softwares provide. Is", "behind the estimates that the slicing softwares provide. Is there", "that the slicing softwares provide. Is there a standard technique", "Is there a standard technique behind this and how accurate", "curious about the algorithm/principles behind the estimates that the slicing", "a standard technique behind this and how accurate is it", "standard technique behind this and how accurate is it ?", "about the algorithm/principles behind the estimates that the slicing softwares", "softwares provide. Is there a standard technique behind this and", "estimates that the slicing softwares provide. Is there a standard", "I am curious about the algorithm/principles behind the estimates that", "the estimates that the slicing softwares provide. Is there a", "slicing softwares provide. Is there a standard technique behind this", "there a standard technique behind this and how accurate is", "provide. Is there a standard technique behind this and how" ]
[ "`/Applications/Cura262`. How can I copy my printer and profile settings", "Mac I've got two versions of Cura installed, in `/Applications/Cura250`", "On my Mac I've got two versions of Cura installed,", "and `/Applications/Cura262`. How can I copy my printer and profile", "my Mac I've got two versions of Cura installed, in", "How can I copy my printer and profile settings from", "installed, in `/Applications/Cura250` and `/Applications/Cura262`. How can I copy my", "`/Applications/Cura250` and `/Applications/Cura262`. How can I copy my printer and", "my printer and profile settings from Cura 2.5 to Cura", "two versions of Cura installed, in `/Applications/Cura250` and `/Applications/Cura262`. How", "copy my printer and profile settings from Cura 2.5 to", "in `/Applications/Cura250` and `/Applications/Cura262`. How can I copy my printer", "I've got two versions of Cura installed, in `/Applications/Cura250` and", "versions of Cura installed, in `/Applications/Cura250` and `/Applications/Cura262`. How can", "printer and profile settings from Cura 2.5 to Cura 2.6?", "can I copy my printer and profile settings from Cura", "got two versions of Cura installed, in `/Applications/Cura250` and `/Applications/Cura262`.", "of Cura installed, in `/Applications/Cura250` and `/Applications/Cura262`. How can I", "Cura installed, in `/Applications/Cura250` and `/Applications/Cura262`. How can I copy", "I copy my printer and profile settings from Cura 2.5" ]
[ "I've read that the led buld radiator can reach 90º", "around 40ºC). So, my question, is PLA a valid material", "some experiments with following lamp (v0.1): [![enter image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg)", "slightly hot, I suppose around 40ºC. According to www info,", "of 150ºC, far from this usage, but a continuous operative", "point of 150ºC, far from this usage, but a continuous", "using PLA (my first 3d print ;-). In some www", "read that the led buld radiator can reach 90º C.", "3d printing unable in a country as my own one,", "methacrylate tube and with a 3D printed finish at the", ";-). In some www pages (by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read", "continuous operative temperature of only 40ºC ( !? this made", "in a country as my own one, where ambient in", "a country as my own one, where ambient in summer", "lamp (v0.1): [![enter image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is a led", "a led bulb enclosed in a methacrylate tube and with", "temperature of only 40ºC ( !? this made 3d printing", "PLA a valid material for this application? If not, some", "from this usage, but a continuous operative temperature of only", "in a methacrylate tube and with a 3D printed finish", "here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is a led bulb enclosed in a methacrylate", "unable in a country as my own one, where ambient", "[here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read that the led buld radiator can reach", "enclosed in a methacrylate tube and with a 3D printed", "C. Experimentally, the methacrylate and the PLA feels only slightly", "finish at the top using PLA (my first 3d print", "top using PLA (my first 3d print ;-). In some", "valid material for this application? If not, some other one", "PLA feels only slightly hot, I suppose around 40ºC. According", "For personal usage, indoor, I'm doing some experiments with following", "a melting point of 150ºC, far from this usage, but", "one, where ambient in summer is around 40ºC). So, my", "printed finish at the top using PLA (my first 3d", "to www info, PLA has a melting point of 150ºC,", "at the top using PLA (my first 3d print ;-).", "own one, where ambient in summer is around 40ºC). So,", "the led buld radiator can reach 90º C. Experimentally, the", "made 3d printing unable in a country as my own", "suppose around 40ºC. According to www info, PLA has a", "led buld radiator can reach 90º C. Experimentally, the methacrylate", "reach 90º C. Experimentally, the methacrylate and the PLA feels", "90º C. Experimentally, the methacrylate and the PLA feels only", "doing some experiments with following lamp (v0.1): [![enter image description", "the PLA feels only slightly hot, I suppose around 40ºC.", "usage, but a continuous operative temperature of only 40ºC (", "is around 40ºC). So, my question, is PLA a valid", "material for this application? If not, some other one better?", "question, is PLA a valid material for this application? If", "summer is around 40ºC). So, my question, is PLA a", "( !? this made 3d printing unable in a country", "(my first 3d print ;-). In some www pages (by", "led bulb enclosed in a methacrylate tube and with a", "this usage, but a continuous operative temperature of only 40ºC", "only 40ºC ( !? this made 3d printing unable in", "can reach 90º C. Experimentally, the methacrylate and the PLA", "with following lamp (v0.1): [![enter image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is", "that the led buld radiator can reach 90º C. Experimentally,", "in summer is around 40ºC). So, my question, is PLA", "Experimentally, the methacrylate and the PLA feels only slightly hot,", "PLA (my first 3d print ;-). In some www pages", "where ambient in summer is around 40ºC). So, my question,", "this application? If not, some other one better? Thanks a", "PLA has a melting point of 150ºC, far from this", "application? If not, some other one better? Thanks a lot.", "I'm doing some experiments with following lamp (v0.1): [![enter image", "of only 40ºC ( !? this made 3d printing unable", "40ºC. According to www info, PLA has a melting point", "a continuous operative temperature of only 40ºC ( !? this", "far from this usage, but a continuous operative temperature of", "operative temperature of only 40ºC ( !? this made 3d", "usage, indoor, I'm doing some experiments with following lamp (v0.1):", "first 3d print ;-). In some www pages (by example,", "3D printed finish at the top using PLA (my first", "description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is a led bulb enclosed in a", "buld radiator can reach 90º C. Experimentally, the methacrylate and", "www pages (by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read that the led", "I suppose around 40ºC. According to www info, PLA has", "!? this made 3d printing unable in a country as", "pages (by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read that the led buld", "(v0.1): [![enter image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is a led bulb", "and with a 3D printed finish at the top using", "only slightly hot, I suppose around 40ºC. According to www", "printing unable in a country as my own one, where", "for this application? If not, some other one better? Thanks", "indoor, I'm doing some experiments with following lamp (v0.1): [![enter", "(by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read that the led buld radiator", "example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read that the led buld radiator can", "So, my question, is PLA a valid material for this", "feels only slightly hot, I suppose around 40ºC. According to", "experiments with following lamp (v0.1): [![enter image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ", "this made 3d printing unable in a country as my", "my own one, where ambient in summer is around 40ºC).", "personal usage, indoor, I'm doing some experiments with following lamp", "[![enter image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is a led bulb enclosed", "www info, PLA has a melting point of 150ºC, far", "as my own one, where ambient in summer is around", "and the PLA feels only slightly hot, I suppose around", "a methacrylate tube and with a 3D printed finish at", "In some www pages (by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read that", "40ºC ( !? this made 3d printing unable in a", "has a melting point of 150ºC, far from this usage,", "info, PLA has a melting point of 150ºC, far from", "is PLA a valid material for this application? If not,", "with a 3D printed finish at the top using PLA", "is a led bulb enclosed in a methacrylate tube and", "following lamp (v0.1): [![enter image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is a", "but a continuous operative temperature of only 40ºC ( !?", "image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is a led bulb enclosed in", "3d print ;-). In some www pages (by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs))", "methacrylate and the PLA feels only slightly hot, I suppose", "around 40ºC. According to www info, PLA has a melting", "melting point of 150ºC, far from this usage, but a", "radiator can reach 90º C. Experimentally, the methacrylate and the", "tube and with a 3D printed finish at the top", "a 3D printed finish at the top using PLA (my", "the top using PLA (my first 3d print ;-). In", "print ;-). In some www pages (by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've", "my question, is PLA a valid material for this application?", "LakhmJ is a led bulb enclosed in a methacrylate tube", "40ºC). So, my question, is PLA a valid material for", "bulb enclosed in a methacrylate tube and with a 3D", "ambient in summer is around 40ºC). So, my question, is", "a valid material for this application? If not, some other", "country as my own one, where ambient in summer is", "hot, I suppose around 40ºC. According to www info, PLA", "150ºC, far from this usage, but a continuous operative temperature", "the methacrylate and the PLA feels only slightly hot, I", "some www pages (by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read that the", "According to www info, PLA has a melting point of" ]
[ "in investment money and not have a 3d printer in", "It appears to have a 20mn in RnD Costs and", "in RnD Costs and $7000 mass market production cost. The", "a 100x faster printer which has a simple and cheap", "access method for one is a USD$ 161,250 yearly subscription.", "so that it does not view consumers as a direct", "million in investment money and not have a 3d printer", "wrong with Carbon 3D so that it does not view", "on it's website? How can they spend 222 million in", "can they spend 222 million in investment money and not", "cost. The only access method for one is a USD$", "faster printer which has a simple and cheap mechanism using", "The only access method for one is a USD$ 161,250", "only access method for one is a USD$ 161,250 yearly", "no market news on it's website? How can they spend", "market, and has no market news on it's website? How", "How can they spend 222 million in investment money and", "spend 222 million in investment money and not have a", "does not view consumers as a direct market, and has", "a USD$ 161,250 yearly subscription. Their printer is not available", "investment money and not have a 3d printer in shapeways", "appears to have a 20mn in RnD Costs and $7000", "simple and cheap mechanism using a Teflon layer. It appears", "printer is not available in shapeways... Is there something wrong", "method for one is a USD$ 161,250 yearly subscription. Their", "mass market production cost. The only access method for one", "shapeways... Is there something wrong with Carbon 3D so that", "in shapeways... Is there something wrong with Carbon 3D so", "it does not view consumers as a direct market, and", "they spend 222 million in investment money and not have", "website? How can they spend 222 million in investment money", "subscription. Their printer is not available in shapeways... Is there", "and $7000 mass market production cost. The only access method", "100x faster printer which has a simple and cheap mechanism", "a simple and cheap mechanism using a Teflon layer. It", "market production cost. The only access method for one is", "a 20mn in RnD Costs and $7000 mass market production", "money and not have a 3d printer in shapeways or", "using a Teflon layer. It appears to have a 20mn", "production cost. The only access method for one is a", "there something wrong with Carbon 3D so that it does", "is not available in shapeways... Is there something wrong with", "made a 100x faster printer which has a simple and", "and not have a 3d printer in shapeways or public", "something wrong with Carbon 3D so that it does not", "view consumers as a direct market, and has no market", "available in shapeways... Is there something wrong with Carbon 3D", "Teflon layer. It appears to have a 20mn in RnD", "161,250 yearly subscription. Their printer is not available in shapeways...", "a direct market, and has no market news on it's", "printer which has a simple and cheap mechanism using a", "consumers as a direct market, and has no market news", "has no market news on it's website? How can they", "not have a 3d printer in shapeways or public access?", "20mn in RnD Costs and $7000 mass market production cost.", "market news on it's website? How can they spend 222", "that it does not view consumers as a direct market,", "for one is a USD$ 161,250 yearly subscription. Their printer", "to have a 20mn in RnD Costs and $7000 mass", "with Carbon 3D so that it does not view consumers", "cheap mechanism using a Teflon layer. It appears to have", "Carbon 3D so that it does not view consumers as", "it's website? How can they spend 222 million in investment", "have a 20mn in RnD Costs and $7000 mass market", "not view consumers as a direct market, and has no", "not available in shapeways... Is there something wrong with Carbon", "$7000 mass market production cost. The only access method for", "has a simple and cheap mechanism using a Teflon layer.", "Costs and $7000 mass market production cost. The only access", "RnD Costs and $7000 mass market production cost. The only", "which has a simple and cheap mechanism using a Teflon", "one is a USD$ 161,250 yearly subscription. Their printer is", "news on it's website? How can they spend 222 million", "and cheap mechanism using a Teflon layer. It appears to", "USD$ 161,250 yearly subscription. Their printer is not available in", "Is there something wrong with Carbon 3D so that it", "a Teflon layer. It appears to have a 20mn in", "Their printer is not available in shapeways... Is there something", "3D so that it does not view consumers as a", "yearly subscription. Their printer is not available in shapeways... Is", "222 million in investment money and not have a 3d", "is a USD$ 161,250 yearly subscription. Their printer is not", "3d made a 100x faster printer which has a simple", "as a direct market, and has no market news on", "and has no market news on it's website? How can", "direct market, and has no market news on it's website?", "Carbon 3d made a 100x faster printer which has a", "mechanism using a Teflon layer. It appears to have a", "layer. It appears to have a 20mn in RnD Costs" ]
[ "for a tipping-bucket rain gauge, which is basically a hollow", "in Siplify 3D with the following settings: * layer height:", "mm/s, infill - 35 mm/s Is it possible to prevent", "am experiencing a minor layer separation when printing a body", "sliced in Siplify 3D with the following settings: * layer", "when printing a body for a tipping-bucket rain gauge, which", "the printing time, which is already 13 hours? PICTURES: [![enter", "irregular and layer separation by adjusting some of the settings,", "0.2 mm * perimeter shells: 3 layers (almost entirely fills", "Is it possible to prevent the irregular and layer separation", "Fillamentum ABS white plastic. The model has been sliced in", "already 13 hours? PICTURES: [![enter image description here](https://i.stack.imgur.com/vNvWx.jpg)](https://i.stack.imgur.com/vNvWx.jpg) [![enter image", "I am using Prusa I3 MK2 and a Fillamentum ABS", "the settings, and not significantly increasing the printing time, which", "(almost entirely fills up the wall) * extruder temperature: 230", "and a Fillamentum ABS white plastic. The model has been", "the wall) * extruder temperature: 230 °C * printing speed:", "thin walls (3 mm). I am using Prusa I3 MK2", "a tipping-bucket rain gauge, which is basically a hollow tube", "perimeter shells: 3 layers (almost entirely fills up the wall)", "printing speed: default - 50 mm/s, outline - 35 mm/s,", "outline - 35 mm/s, infill - 35 mm/s Is it", "tipping-bucket rain gauge, which is basically a hollow tube with", "walls (3 mm). I am using Prusa I3 MK2 and", "35 mm/s, infill - 35 mm/s Is it possible to", "rain gauge, which is basically a hollow tube with thin", "extruder temperature: 230 °C * printing speed: default - 50", "mm/s Is it possible to prevent the irregular and layer", "tube with thin walls (3 mm). I am using Prusa", "a body for a tipping-bucket rain gauge, which is basically", "3D with the following settings: * layer height: 0.2 mm", "50 mm/s, outline - 35 mm/s, infill - 35 mm/s", "- 35 mm/s Is it possible to prevent the irregular", "Siplify 3D with the following settings: * layer height: 0.2", "layer separation by adjusting some of the settings, and not", "ABS white plastic. The model has been sliced in Siplify", "to prevent the irregular and layer separation by adjusting some", "which is already 13 hours? PICTURES: [![enter image description here](https://i.stack.imgur.com/vNvWx.jpg)](https://i.stack.imgur.com/vNvWx.jpg)", "hollow tube with thin walls (3 mm). I am using", "increasing the printing time, which is already 13 hours? PICTURES:", "gauge, which is basically a hollow tube with thin walls", "possible to prevent the irregular and layer separation by adjusting", "time, which is already 13 hours? PICTURES: [![enter image description", "separation when printing a body for a tipping-bucket rain gauge,", "not significantly increasing the printing time, which is already 13", "The model has been sliced in Siplify 3D with the", "by adjusting some of the settings, and not significantly increasing", "height: 0.2 mm * perimeter shells: 3 layers (almost entirely", "basically a hollow tube with thin walls (3 mm). I", "layer separation when printing a body for a tipping-bucket rain", "it possible to prevent the irregular and layer separation by", "some of the settings, and not significantly increasing the printing", "mm * perimeter shells: 3 layers (almost entirely fills up", "- 50 mm/s, outline - 35 mm/s, infill - 35", "is basically a hollow tube with thin walls (3 mm).", "settings: * layer height: 0.2 mm * perimeter shells: 3", "white plastic. The model has been sliced in Siplify 3D", "following settings: * layer height: 0.2 mm * perimeter shells:", "mm). I am using Prusa I3 MK2 and a Fillamentum", "MK2 and a Fillamentum ABS white plastic. The model has", "been sliced in Siplify 3D with the following settings: ", "of the settings, and not significantly increasing the printing time,", "model has been sliced in Siplify 3D* with the following", "a Fillamentum ABS white plastic. The model has been sliced", "with thin walls (3 mm). I am using *Prusa I3", "fills up the wall) extruder temperature: 230 °C ", "up the wall) extruder temperature: 230 °C * printing", "entirely fills up the wall) * extruder temperature: 230 °C", "with the following settings: * layer height: 0.2 mm ", "minor layer separation when printing a body for a tipping-bucket", "temperature: 230 °C printing speed: default - 50 mm/s,", "has been sliced in Siplify 3D with the following settings:", "(3 mm). I am using Prusa I3 MK2 and a", "adjusting some of the settings, and not significantly increasing the", "which is basically a hollow tube with thin walls (3", "35 mm/s Is it possible to prevent the irregular and", "and not significantly increasing the printing time, which is already", "prevent the irregular and layer separation by adjusting some of", "speed: default - 50 mm/s, outline - 35 mm/s, infill", "separation by adjusting some of the settings, and not significantly", "* extruder temperature: 230 °C * printing speed: default -", "hours? PICTURES: [![enter image description here](https://i.stack.imgur.com/vNvWx.jpg)](https://i.stack.imgur.com/vNvWx.jpg) [![enter image description here](https://i.stack.imgur.com/93hzZ.jpg)](https://i.stack.imgur.com/93hzZ.jpg)", "significantly increasing the printing time, which is already 13 hours?", "infill - 35 mm/s Is it possible to prevent the", "plastic. The model has been sliced in Siplify 3D with", "settings, and not significantly increasing the printing time, which is", "I am experiencing a minor layer separation when printing a", "am using Prusa I3 MK2 and a Fillamentum ABS white", "13 hours? PICTURES: [![enter image description here](https://i.stack.imgur.com/vNvWx.jpg)](https://i.stack.imgur.com/vNvWx.jpg) [![enter image description", "230 °C * printing speed: default - 50 mm/s, outline", "* layer height: 0.2 mm * perimeter shells: 3 layers", "layer height: 0.2 mm * perimeter shells: 3 layers (almost", "the following settings: * layer height: 0.2 mm * perimeter", "°C * printing speed: default - 50 mm/s, outline -", "body for a tipping-bucket rain gauge, which is basically a", "shells: 3 layers (almost entirely fills up the wall) ", "a hollow tube with thin walls (3 mm). I am", " printing speed: default - 50 mm/s, outline - 35", "I3 MK2 and a Fillamentum ABS white plastic. The model", "a minor layer separation when printing a body for a", "Prusa I3 MK2 and a Fillamentum ABS** white plastic. The", "the irregular and layer separation by adjusting some of the", "is already 13 hours? PICTURES: [![enter image description here](https://i.stack.imgur.com/vNvWx.jpg)](https://i.stack.imgur.com/vNvWx.jpg) [![enter", "printing a body for a tipping-bucket rain gauge, which is", "wall) * extruder temperature: 230 °C * printing speed: default", "layers (almost entirely fills up the wall) * extruder temperature:", "using Prusa I3 MK2 and a Fillamentum ABS white plastic.", "3 layers (almost entirely fills up the wall) * extruder", "default - 50 mm/s, outline - 35 mm/s, infill -", "printing time, which is already 13 hours? PICTURES: [![enter image", "- 35 mm/s, infill - 35 mm/s Is it possible", "and layer separation by adjusting some of the settings, and", "experiencing a minor layer separation when printing a body for", "* perimeter shells: 3 layers (almost entirely fills up the", "mm/s, outline - 35 mm/s, infill - 35 mm/s Is" ]
[ "just getting into 3D printing? I have been looking at", "who is just getting into 3D printing? I have been", "at the Anet A8 on ebay but not sure if", "which 3D printers are good for someone who is just", "someone who is just getting into 3D printing? I have", "on which 3D printers are good for someone who is", "have been looking at the Anet A8 on ebay but", "good for someone who is just getting into 3D printing?", "printing? I have been looking at the Anet A8 on", "been looking at the Anet A8 on ebay but not", "3D printing? I have been looking at the Anet A8", "was looking for some advice on which 3D printers are", "advice on which 3D printers are good for someone who", "I have been looking at the Anet A8 on ebay", "are good for someone who is just getting into 3D", "ebay but not sure if they are any good or", "the Anet A8 on ebay but not sure if they", "on ebay but not sure if they are any good", "for some advice on which 3D printers are good for", "for someone who is just getting into 3D printing? I", "I was looking for some advice on which 3D printers", "but not sure if they are any good or not.", "A8 on ebay but not sure if they are any", "Anet A8 on ebay but not sure if they are", "not sure if they are any good or not. Regards", "is just getting into 3D printing? I have been looking", "3D printers are good for someone who is just getting", "looking for some advice on which 3D printers are good", "getting into 3D printing? I have been looking at the", "printers are good for someone who is just getting into", "into 3D printing? I have been looking at the Anet", "looking at the Anet A8 on ebay but not sure", "some advice on which 3D printers are good for someone" ]
[ "This appears to help quite a bit. * Bed heated", "[![example of warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details about the print", "print custom insoles for shoes and I'm getting some bad", "help quite a bit. * Bed heated to 75 degrees.", "am coating my hotbead with clear packaging adhesive (OPP tape)", "I've tried printing at 220 degrees and 170 degrees. ", "help me achieve a good 3d print using polypropylene. I", "wondering if anyone can help me achieve a good 3d", "am wondering if anyone can help me achieve a good", "which I believe indicates that not enough voltage is getting", " I've tried enclosing the printer in a makeshift enclosure", "printing at 220 degrees and 170 degrees. * I've tried", "to the bed heater. * I've tried printing at 220", "bottom and side layers. The print takes about 5 hours", "degrees and 170 degrees. * I've tried enclosing the printer", "75 degrees. I tried 100 but got hit with the", "hour or two before starting to warp. Does anyone have", "warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details about the print and process:", "bad warping/lifting (see image). [![example of warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some", "\"Heatbed Thermal Runaway\" error which I believe indicates that not", "cooling at. * Other settings: speed 40mm/s constant, 0.2mm layer", "custom insoles for shoes and I'm getting some bad warping/lifting", "to warp. Does anyone have any suggestions of things I", "at 220 degrees and 170 degrees. * I've tried enclosing", "if anyone can help me achieve a good 3d print", "voltage is getting to the bed heater. * I've tried", "as per the manufacturers instructions. This appears to help quite", "to help quite a bit. * Bed heated to 75", "the material is cooling at. * Other settings: speed 40mm/s", "and side layers. The print takes about 5 hours and", "the print and process: * I have a Prusa i3", "stay down for an hour or two before starting to", "indicates that not enough voltage is getting to the bed", "I am coating my hotbead with clear packaging adhesive (OPP", "degrees. * I've tried enclosing the printer in a makeshift", "image). [![example of warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details about the", "(see image). [![example of warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details about", "the bed heater. * I've tried printing at 220 degrees", "tried 100 but got hit with the \"Heatbed Thermal Runaway\"", "settings: speed 40mm/s constant, 0.2mm layer height, 20% infill, 3", "got hit with the \"Heatbed Thermal Runaway\" error which I", "with clear packaging adhesive (OPP tape) as per the manufacturers", "I have a Prusa i3 Mk2S with a Flexion extruder", "manufacturers instructions. This appears to help quite a bit. ", "insoles for shoes and I'm getting some bad warping/lifting (see", "100 but got hit with the \"Heatbed Thermal Runaway\" error", "material is cooling at. Other settings: speed 40mm/s constant,", "shoes and I'm getting some bad warping/lifting (see image). [![example", "process: * I have a Prusa i3 Mk2S with a", "reduce the speed that the material is cooling at. ", "filament (Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> I am coating my hotbead", "my hotbead with clear packaging adhesive (OPP tape) as per", "(Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> * I am coating my hotbead with", "5 hours and seems to stay down for an hour", "* I am using what I believe is a good", "but got hit with the \"Heatbed Thermal Runaway\" error which", "is getting to the bed heater. * I've tried printing", "Prusa i3 Mk2S with a Flexion extruder * I am", "heater. * I've tried printing at 220 degrees and 170", "* I have a Prusa i3 Mk2S with a Flexion", "a Flexion extruder * I am using what I believe", "a makeshift enclosure to reduce the speed that the material", "for shoes and I'm getting some bad warping/lifting (see image).", "quite a bit. * Bed heated to 75 degrees. I", "anyone can help me achieve a good 3d print using", "to reduce the speed that the material is cooling at.", "print and process: * I have a Prusa i3 Mk2S", "quality filament (Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> * I am coating my", "Runaway\" error which I believe indicates that not enough voltage", "bit. * Bed heated to 75 degrees. I tried 100", "speed 40mm/s constant, 0.2mm layer height, 20% infill, 3 top", "about the print and process: * I have a Prusa", "takes about 5 hours and seems to stay down for", "0.2mm layer height, 20% infill, 3 top bottom and side", "i3 Mk2S with a Flexion extruder * I am using", "me achieve a good 3d print using polypropylene. I am", "hit with the \"Heatbed Thermal Runaway\" error which I believe", "enough voltage is getting to the bed heater. * I've", "I'm getting some bad warping/lifting (see image). [![example of warping", "tried enclosing the printer in a makeshift enclosure to reduce", "using polypropylene. I am trying to print custom insoles for", "about 5 hours and seems to stay down for an", "I believe indicates that not enough voltage is getting to", "seems to stay down for an hour or two before", "and process: * I have a Prusa i3 Mk2S with", "* Other settings: speed 40mm/s constant, 0.2mm layer height, 20%", "hours and seems to stay down for an hour or", "some bad warping/lifting (see image). [![example of warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg)", "I am trying to print custom insoles for shoes and", "and seems to stay down for an hour or two", "40mm/s constant, 0.2mm layer height, 20% infill, 3 top bottom", "bed heater. * I've tried printing at 220 degrees and", "The print takes about 5 hours and seems to stay", "a Prusa i3 Mk2S with a Flexion extruder * I", "have a Prusa i3 Mk2S with a Flexion extruder ", "that not enough voltage is getting to the bed heater.", "believe is a good quality filament (Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> ", "Other settings: speed 40mm/s constant, 0.2mm layer height, 20% infill,", "what I believe is a good quality filament (Verbatim PP):", "* I've tried printing at 220 degrees and 170 degrees.", "clear packaging adhesive (OPP tape) as per the manufacturers instructions.", "heated to 75 degrees. I tried 100 but got hit", "printer in a makeshift enclosure to reduce the speed that", "before starting to warp. Does anyone have any suggestions of", "* I am coating my hotbead with clear packaging adhesive", "packaging adhesive (OPP tape) as per the manufacturers instructions. This", "per the manufacturers instructions. This appears to help quite a", "the printer in a makeshift enclosure to reduce the speed", "layer height, 20% infill, 3 top bottom and side layers.", "polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details about the print and process: * I", "the \"Heatbed Thermal Runaway\" error which I believe indicates that", "Mk2S with a Flexion extruder * I am using what", "layers. The print takes about 5 hours and seems to", "down for an hour or two before starting to warp.", "I am wondering if anyone can help me achieve a", "am using what I believe is a good quality filament", "in a makeshift enclosure to reduce the speed that the", "the manufacturers instructions. This appears to help quite a bit.", "3 top bottom and side layers. The print takes about", "speed that the material is cooling at. * Other settings:", "<https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> * I am coating my hotbead with clear packaging", "appears to help quite a bit. * Bed heated to", "believe indicates that not enough voltage is getting to the", "Flexion extruder * I am using what I believe is", "* Bed heated to 75 degrees. I tried 100 but", "top bottom and side layers. The print takes about 5", "adhesive (OPP tape) as per the manufacturers instructions. This appears", "side layers. The print takes about 5 hours and seems", "print takes about 5 hours and seems to stay down", "print using polypropylene. I am trying to print custom insoles", "getting some bad warping/lifting (see image). [![example of warping using", "the speed that the material is cooling at. * Other", "a bit. * Bed heated to 75 degrees. I tried", "error which I believe indicates that not enough voltage is", "two before starting to warp. Does anyone have any suggestions", "using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details about the print and process: ", "polypropylene. I am trying to print custom insoles for shoes", "to stay down for an hour or two before starting", "not enough voltage is getting to the bed heater. ", "20% infill, 3 top bottom and side layers. The print", "constant, 0.2mm layer height, 20% infill, 3 top bottom and", "good quality filament (Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> * I am coating", "a good 3d print using polypropylene. I am trying to", "tape) as per the manufacturers instructions. This appears to help", "am trying to print custom insoles for shoes and I'm", "Does anyone have any suggestions of things I should try?", "makeshift enclosure to reduce the speed that the material is", "at. * Other settings: speed 40mm/s constant, 0.2mm layer height,", "height, 20% infill, 3 top bottom and side layers. The", "warping/lifting (see image). [![example of warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details", "infill, 3 top bottom and side layers. The print takes", "and 170 degrees. * I've tried enclosing the printer in", "Some details about the print and process: * I have", "getting to the bed heater. * I've tried printing at", "that the material is cooling at. * Other settings: speed", "starting to warp. Does anyone have any suggestions of things", "degrees. I tried 100 but got hit with the \"Heatbed", "with a Flexion extruder * I am using what I", "instructions. This appears to help quite a bit. * Bed", "170 degrees. * I've tried enclosing the printer in a", "(OPP tape) as per the manufacturers instructions. This appears to", "an hour or two before starting to warp. Does anyone", "Thermal Runaway\" error which I believe indicates that not enough", "details about the print and process: * I have a", "220 degrees and 170 degrees. * I've tried enclosing the", "of warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details about the print and", "to 75 degrees. I tried 100 but got hit with", "enclosing the printer in a makeshift enclosure to reduce the", "to print custom insoles for shoes and I'm getting some", "trying to print custom insoles for shoes and I'm getting", "I believe is a good quality filament (Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html>", "is a good quality filament (Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> * I", "warp. Does anyone have any suggestions of things I should", "coating my hotbead with clear packaging adhesive (OPP tape) as", "with the \"Heatbed Thermal Runaway\" error which I believe indicates", "using what I believe is a good quality filament (Verbatim", "hotbead with clear packaging adhesive (OPP tape) as per the", "and I'm getting some bad warping/lifting (see image). [![example of", "PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> * I am coating my hotbead with clear", "Bed heated to 75 degrees. I tried 100 but got", "achieve a good 3d print using polypropylene. I am trying", "3d print using polypropylene. I am trying to print custom", "can help me achieve a good 3d print using polypropylene.", "a good quality filament (Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> * I am", "is cooling at. * Other settings: speed 40mm/s constant, 0.2mm", "for an hour or two before starting to warp. Does", "enclosure to reduce the speed that the material is cooling", "tried printing at 220 degrees and 170 degrees. * I've", "good 3d print using polypropylene. I am trying to print", "or two before starting to warp. Does anyone have any", "I've tried enclosing the printer in a makeshift enclosure to", "I tried 100 but got hit with the \"Heatbed Thermal", "extruder * I am using what I believe is a", "I am using what I believe is a good quality" ]
[ "with PETG so I can create objects that won't deform", "printing with PETG so I can create objects that won't", "in places. What should I try to prevent that? I", "but have strings of material coming off the print in", "them in my car. My first prints look good, but", "My first prints look good, but have strings of material", "so I can create objects that won't deform if I", "have strings of material coming off the print in places.", "try to prevent that? I haven't had this problem with", "create objects that won't deform if I leave them in", "deform if I leave them in my car. My first", "that won't deform if I leave them in my car.", "first prints look good, but have strings of material coming", "I can create objects that won't deform if I leave", "car. My first prints look good, but have strings of", "off the print in places. What should I try to", "coming off the print in places. What should I try", "won't deform if I leave them in my car. My", "should I try to prevent that? I haven't had this", "I have started printing with PETG so I can create", "material coming off the print in places. What should I", "in my car. My first prints look good, but have", "I try to prevent that? I haven't had this problem", "prints look good, but have strings of material coming off", "to prevent that? I haven't had this problem with PLA.", "started printing with PETG so I can create objects that", "strings of material coming off the print in places. What", "have started printing with PETG so I can create objects", "objects that won't deform if I leave them in my", "of material coming off the print in places. What should", "print in places. What should I try to prevent that?", "PETG so I can create objects that won't deform if", "look good, but have strings of material coming off the", "my car. My first prints look good, but have strings", "leave them in my car. My first prints look good,", "if I leave them in my car. My first prints", "I leave them in my car. My first prints look", "good, but have strings of material coming off the print", "can create objects that won't deform if I leave them", "places. What should I try to prevent that? I haven't", "What should I try to prevent that? I haven't had", "the print in places. What should I try to prevent" ]
[ "the enclosure with a heat gun or two to hear", "heated bed for simply heating the entire enclosure? The idea", "makers: If I'm building a large scale printer (probably a", "as far as I can tell) as it seems 400\\400", "and materials engineering is probably the furthest thing from my", "silicone heat pads tend to go for about 80 bucks", "I feel that this won't work as well because the", "from my area of expertise so I thought I would", "bed for simply heating the entire enclosure? The idea would", "heat pads tend to go for about 80 bucks a", "pose this to more experienced makers: If I'm building a", "sub33D's 1200x1200 printer) that I'm only going to print in", "heat pads and space them evenly under a glass bed,", "use two or three heat pads and space them evenly", "building a large scale printer (probably a similar size to", "to do this to try and reduce the cost (significantly", "two or three heat pads and space them evenly under", "well because the heating won't be homogenous... Any input is", "won't work as well because the heating won't be homogenous...", "to go for about 80 bucks a pop. An alternate", "400\\400 silicone heat pads tend to go for about 80", "space them evenly under a glass bed, although I feel", "idea I had was to use two or three heat", "so I thought I would pose this to more experienced", "a large scale printer (probably a similar size to substation33", "a thermistor measuring the ambient air temp inside the enclosure", "the entire enclosure? The idea would be to have a", "I thought I would pose this to more experienced makers:", "idea would be to have a thermistor measuring the ambient", "I had was to use two or three heat pads", "1200x1200 printer) that I'm only going to print in PLA", "that I'm only going to print in PLA and MAYBE", "enclosure as necessary. I want to do this to try", "feel that this won't work as well because the heating", "anything) and materials engineering is probably the furthest thing from", "pads tend to go for about 80 bucks a pop.", "it seems 400\\400 silicone heat pads tend to go for", "the heating won't be homogenous... Any input is appreciated :)", "ABS occasionally, can I substitute the heated bed for simply", "only going to print in PLA and MAYBE ABS occasionally,", "bed, although I feel that this won't work as well", "pads and space them evenly under a glass bed, although", "can I substitute the heated bed for simply heating the", "more experienced makers: If I'm building a large scale printer", "good prints from my Wanhao di3 plus, but haven't done", "pop. An alternate idea I had was to use two", "have a thermistor measuring the ambient air temp inside the", "similar size to substation33 - sub33D's 1200x1200 printer) that I'm", "heating the entire enclosure? The idea would be to have", "print in PLA and MAYBE ABS occasionally, can I substitute", "thought I would pose this to more experienced makers: If", "I can tell) as it seems 400\\400 silicone heat pads", "as it seems 400\\400 silicone heat pads tend to go", "I'm /relatively/ new to 3d printing (I'm getting pretty good", "(significantly as far as I can tell) as it seems", "area of expertise so I thought I would pose this", "but haven't done any DIY kits or anything) and materials", "inside the enclosure with a heat gun or two to", "glass bed, although I feel that this won't work as", "(I'm getting pretty good prints from my Wanhao di3 plus,", "the furthest thing from my area of expertise so I", "thing from my area of expertise so I thought I", "and reduce the cost (significantly as far as I can", "size to substation33 - sub33D's 1200x1200 printer) that I'm only", "I would pose this to more experienced makers: If I'm", "reduce the cost (significantly as far as I can tell)", "or three heat pads and space them evenly under a", "as necessary. I want to do this to try and", "any DIY kits or anything) and materials engineering is probably", "plus, but haven't done any DIY kits or anything) and", "scale printer (probably a similar size to substation33 - sub33D's", "in PLA and MAYBE ABS occasionally, can I substitute the", "to print in PLA and MAYBE ABS occasionally, can I", "the cost (significantly as far as I can tell) as", "necessary. I want to do this to try and reduce", "because the heating won't be homogenous... Any input is appreciated", "is probably the furthest thing from my area of expertise", "expertise so I thought I would pose this to more", "to have a thermistor measuring the ambient air temp inside", "tend to go for about 80 bucks a pop. An", "to more experienced makers: If I'm building a large scale", "about 80 bucks a pop. An alternate idea I had", "materials engineering is probably the furthest thing from my area", "under a glass bed, although I feel that this won't", "the entire enclosure as necessary. I want to do this", "di3 plus, but haven't done any DIY kits or anything)", "Wanhao di3 plus, but haven't done any DIY kits or", "as I can tell) as it seems 400\\400 silicone heat", "go for about 80 bucks a pop. An alternate idea", "entire enclosure as necessary. I want to do this to", "kits or anything) and materials engineering is probably the furthest", "of expertise so I thought I would pose this to", "to try and reduce the cost (significantly as far as", "printer (probably a similar size to substation33 - sub33D's 1200x1200", "heat gun or two to hear the entire enclosure as", "air temp inside the enclosure with a heat gun or", "furthest thing from my area of expertise so I thought", "printing (I'm getting pretty good prints from my Wanhao di3", "large scale printer (probably a similar size to substation33 -", "hear the entire enclosure as necessary. I want to do", "this to try and reduce the cost (significantly as far", "work as well because the heating won't be homogenous... Any", "to hear the entire enclosure as necessary. I want to", "temp inside the enclosure with a heat gun or two", "be to have a thermistor measuring the ambient air temp", "entire enclosure? The idea would be to have a thermistor", "measuring the ambient air temp inside the enclosure with a", "I'm building a large scale printer (probably a similar size", "a heat gun or two to hear the entire enclosure", "far as I can tell) as it seems 400\\400 silicone", "to 3d printing (I'm getting pretty good prints from my", "going to print in PLA and MAYBE ABS occasionally, can", "printer) that I'm only going to print in PLA and", "simply heating the entire enclosure? The idea would be to", "had was to use two or three heat pads and", "gun or two to hear the entire enclosure as necessary.", "tell) as it seems 400\\400 silicone heat pads tend to", "a glass bed, although I feel that this won't work", "to substation33 - sub33D's 1200x1200 printer) that I'm only going", "PLA and MAYBE ABS occasionally, can I substitute the heated", "haven't done any DIY kits or anything) and materials engineering", "do this to try and reduce the cost (significantly as", "from my Wanhao di3 plus, but haven't done any DIY", "cost (significantly as far as I can tell) as it", "or anything) and materials engineering is probably the furthest thing", "I'm only going to print in PLA and MAYBE ABS", "bucks a pop. An alternate idea I had was to", "would be to have a thermistor measuring the ambient air", "a pop. An alternate idea I had was to use", "seems 400\\400 silicone heat pads tend to go for about", "(probably a similar size to substation33 - sub33D's 1200x1200 printer)", "the heated bed for simply heating the entire enclosure? The", "new to 3d printing (I'm getting pretty good prints from", "pretty good prints from my Wanhao di3 plus, but haven't", "engineering is probably the furthest thing from my area of", "substitute the heated bed for simply heating the entire enclosure?", "MAYBE ABS occasionally, can I substitute the heated bed for", "two to hear the entire enclosure as necessary. I want", "DIY kits or anything) and materials engineering is probably the", "can tell) as it seems 400\\400 silicone heat pads tend", "my Wanhao di3 plus, but haven't done any DIY kits", "three heat pads and space them evenly under a glass", "enclosure? The idea would be to have a thermistor measuring", "ambient air temp inside the enclosure with a heat gun", "and MAYBE ABS occasionally, can I substitute the heated bed", "I substitute the heated bed for simply heating the entire", "although I feel that this won't work as well because", "80 bucks a pop. An alternate idea I had was", "would pose this to more experienced makers: If I'm building", "enclosure with a heat gun or two to hear the", "them evenly under a glass bed, although I feel that", "done any DIY kits or anything) and materials engineering is", "my area of expertise so I thought I would pose", "was to use two or three heat pads and space", "this won't work as well because the heating won't be", "/relatively/ new to 3d printing (I'm getting pretty good prints", "for about 80 bucks a pop. An alternate idea I", "want to do this to try and reduce the cost", "occasionally, can I substitute the heated bed for simply heating", "a similar size to substation33 - sub33D's 1200x1200 printer) that", "and space them evenly under a glass bed, although I", "prints from my Wanhao di3 plus, but haven't done any", "experienced makers: If I'm building a large scale printer (probably", "If I'm building a large scale printer (probably a similar", "probably the furthest thing from my area of expertise so", "this to more experienced makers: If I'm building a large", "3d printing (I'm getting pretty good prints from my Wanhao", "for simply heating the entire enclosure? The idea would be", "try and reduce the cost (significantly as far as I", "as well because the heating won't be homogenous... Any input", "The idea would be to have a thermistor measuring the", "thermistor measuring the ambient air temp inside the enclosure with", "- sub33D's 1200x1200 printer) that I'm only going to print", "substation33 - sub33D's 1200x1200 printer) that I'm only going to", "I want to do this to try and reduce the", "or two to hear the entire enclosure as necessary. I", "evenly under a glass bed, although I feel that this", "getting pretty good prints from my Wanhao di3 plus, but", "the ambient air temp inside the enclosure with a heat", "that this won't work as well because the heating won't", "to use two or three heat pads and space them", "alternate idea I had was to use two or three", "with a heat gun or two to hear the entire", "An alternate idea I had was to use two or" ]
[ "place an aluminum foil lined cardboard box over my printer", "20 mm/s top solid and solid speed; * No acceleration.", "of 80 °C; * 5 % rectilinear infill; * 0.25", "temps. The tearing only occurs on large top layer surfaces.", "my printer to help keep the ambient temps up for", "or not enough top layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn", "mm/s perimeter print speed; * 60 mm/s infill speed; ", "measured the temperature inside, but the cardboard box insulates very", "ambient temps up for less warping and stronger prints. I've", "acceleration. When printing ABS, I place an aluminum foil lined", "bottom; Fan is completely disabled; * 0.25 mm extrusion", "from too large of gaps in my infill, too fast", "and bottom; * Fan is completely disabled; * 0.25 mm", "top and bottom; * Fan is completely disabled; * 0.25", "* 50 mm/s perimeter print speed; * 60 mm/s infill", "infill, too fast print speeds, or not enough top layers.", "if it's from too large of gaps in my infill,", "°C; * 5 % rectilinear infill; * 0.25 mm layer", "I'm not sure if it's from too large of gaps", "the cardboard box insulates very well. I get this weird", "it's from too large of gaps in my infill, too", "well. I get this weird kind of tearing in my", "cardboard box over my printer to help keep the ambient", "is some kind of drooping because of the high ambient", "°C; * with a bedtemp of 80 °C; * 5", "layer height; * 2 solid layers top and bottom; ", "print speeds, or not enough top layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn", " Fan is completely disabled; * 0.25 mm extrusion width;", "of tearing in my prints, I'm not sure if it's", "lined cardboard box over my printer to help keep the", "very well. I get this weird kind of tearing in", "this weird kind of tearing in my prints, I'm not", "and solid speed; * No acceleration. When printing ABS, I", "the high ambient temps. The tearing only occurs on large", "my ABS at: * 240 °C; * with a bedtemp", "drooping because of the high ambient temps. The tearing only", "80 °C; * 5 % rectilinear infill; * 0.25 mm", "solid speed; * No acceleration. When printing ABS, I place", "in my prints, I'm not sure if it's from too", "speed; * No acceleration. When printing ABS, I place an", "bedtemp of 80 °C; * 5 % rectilinear infill; ", "warping and stronger prints. I've never actually measured the temperature", "60 mm/s infill speed; 20 mm/s top solid and", "stronger prints. I've never actually measured the temperature inside, but", "mm layer height; * 2 solid layers top and bottom;", "Fan is completely disabled; * 0.25 mm extrusion width; ", "\"Torn print\") Another guess is some kind of drooping because", "and stronger prints. I've never actually measured the temperature inside,", "in my infill, too fast print speeds, or not enough", "print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\") Another guess is some kind", "box over my printer to help keep the ambient temps", "completely disabled; 0.25 mm extrusion width; * 50 mm/s", "0.25 mm layer height; * 2 solid layers top and", "not enough top layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")", "an aluminum foil lined cardboard box over my printer to", "over my printer to help keep the ambient temps up", "of drooping because of the high ambient temps. The tearing", "print my ABS at: * 240 °C; * with a", "rectilinear infill; * 0.25 mm layer height; * 2 solid", "ambient temps. The tearing only occurs on large top layer", "keep the ambient temps up for less warping and stronger", "infill; * 0.25 mm layer height; * 2 solid layers", "of gaps in my infill, too fast print speeds, or", "is completely disabled; * 0.25 mm extrusion width; * 50", "50 mm/s perimeter print speed; * 60 mm/s infill speed;", "solid and solid speed; * No acceleration. When printing ABS,", "infill speed; * 20 mm/s top solid and solid speed;", "2 solid layers top and bottom; * Fan is completely", "insulates very well. I get this weird kind of tearing", "too large of gaps in my infill, too fast print", "at: * 240 °C; * with a bedtemp of 80", "* 240 °C; * with a bedtemp of 80 °C;", "mm extrusion width; * 50 mm/s perimeter print speed; ", "printer to help keep the ambient temps up for less", "sure if it's from too large of gaps in my", "5 % rectilinear infill; 0.25 mm layer height; ", "not sure if it's from too large of gaps in", "large of gaps in my infill, too fast print speeds,", "ABS, I place an aluminum foil lined cardboard box over", "of the high ambient temps. The tearing only occurs on", " No acceleration. When printing ABS, I place an aluminum", "* 20 mm/s top solid and solid speed; * No", "* 0.25 mm extrusion width; * 50 mm/s perimeter print", "box insulates very well. I get this weird kind of", "to help keep the ambient temps up for less warping", "* with a bedtemp of 80 °C; * 5 %", "print speed; * 60 mm/s infill speed; * 20 mm/s", "never actually measured the temperature inside, but the cardboard box", "because of the high ambient temps. The tearing only occurs", "inside, but the cardboard box insulates very well. I get", "a bedtemp of 80 °C; * 5 % rectilinear infill;", "fast print speeds, or not enough top layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg", "solid layers top and bottom; * Fan is completely disabled;", "prints. I've never actually measured the temperature inside, but the", "[![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\") Another guess is some", "\"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\") Another guess is some kind of", "but the cardboard box insulates very well. I get this", "0.25 mm extrusion width; * 50 mm/s perimeter print speed;", "perimeter print speed; * 60 mm/s infill speed; * 20", "cardboard box insulates very well. I get this weird kind", "guess is some kind of drooping because of the high", "some kind of drooping because of the high ambient temps.", "layers top and bottom; * Fan is completely disabled; ", "240 °C; with a bedtemp of 80 °C; ", "with a bedtemp of 80 °C; 5 % rectilinear", "temperature inside, but the cardboard box insulates very well. I", "% rectilinear infill; * 0.25 mm layer height; * 2", "up for less warping and stronger prints. I've never actually", "top layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\") Another guess", "I print my ABS at: * 240 °C; * with", "layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\") Another guess is", "the temperature inside, but the cardboard box insulates very well.", "width; * 50 mm/s perimeter print speed; * 60 mm/s", "top solid and solid speed; * No acceleration. When printing", "foil lined cardboard box over my printer to help keep", "temps up for less warping and stronger prints. I've never", "my prints, I'm not sure if it's from too large", "Another guess is some kind of drooping because of the", "less warping and stronger prints. I've never actually measured the", "I get this weird kind of tearing in my prints,", "enough top layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\") Another", "aluminum foil lined cardboard box over my printer to help", "mm/s top solid and solid speed; * No acceleration. When", "* 2 solid layers top and bottom; * Fan is", "actually measured the temperature inside, but the cardboard box insulates", "print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\") Another guess is some kind of drooping", "* 60 mm/s infill speed; * 20 mm/s top solid", "* 0.25 mm layer height; * 2 solid layers top", "speeds, or not enough top layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg", "weird kind of tearing in my prints, I'm not sure", "get this weird kind of tearing in my prints, I'm", "gaps in my infill, too fast print speeds, or not", "high ambient temps. The tearing only occurs on large top", "tearing in my prints, I'm not sure if it's from", "height; * 2 solid layers top and bottom; * Fan", "too fast print speeds, or not enough top layers. [![Torn", "No acceleration. When printing ABS, I place an aluminum foil", "I've never actually measured the temperature inside, but the cardboard", "disabled; * 0.25 mm extrusion width; * 50 mm/s perimeter", "ABS at: * 240 °C; * with a bedtemp of", "prints, I'm not sure if it's from too large of", "my infill, too fast print speeds, or not enough top", "printing ABS, I place an aluminum foil lined cardboard box", "* 5 % rectilinear infill; * 0.25 mm layer height;", "for less warping and stronger prints. I've never actually measured", "When printing ABS, I place an aluminum foil lined cardboard", "print\") Another guess is some kind of drooping because of", "kind of tearing in my prints, I'm not sure if", "kind of drooping because of the high ambient temps. The", "the ambient temps up for less warping and stronger prints.", "help keep the ambient temps up for less warping and", "mm/s infill speed; * 20 mm/s top solid and solid", "I place an aluminum foil lined cardboard box over my", "speed; * 60 mm/s infill speed; * 20 mm/s top", "speed; * 20 mm/s top solid and solid speed; ", "extrusion width; 50 mm/s perimeter print speed; * 60" ]
[ "like some advice from the experts before committing. Anyone in", "will run the machine in an unventilated garage, which is", "I've described and would like some advice from the experts", "didn't really come across any scenarios like I've described and", "I'm thinking I will run the machine in an unventilated", "and humid during the summer in Texas. My price range", "USD. I've looked at several options but I didn't really", "for accuracy and mechanical strength over speed and volume. I'm", "before committing. Anyone in a similar boat have any suggestions?", "in an unventilated garage, which is quite warm and humid", "harmful emissions so would like a solution with some sort", "printing small machine parts (gears, linkages, structural components) so I'm", "looked at several options but I didn't really come across", "with some sort of filtration, whether it's built into the", "some sort of filtration, whether it's built into the machine", "range is \\$1500-\\$2000 USD. I've looked at several options but", "humid during the summer in Texas. My price range is", "several options but I didn't really come across any scenarios", "a solution with some sort of filtration, whether it's built", "in printing small machine parts (gears, linkages, structural components) so", "concerned about harmful emissions so would like a solution with", "would like some advice from the experts before committing. Anyone", "also somewhat concerned about harmful emissions so would like a", "is \\$1500-\\$2000 USD. I've looked at several options but I", "machine parts (gears, linkages, structural components) so I'm looking for", "mechanical strength over speed and volume. I'm also somewhat concerned", "it's built into the machine or something added. I'm thinking", "and mechanical strength over speed and volume. I'm also somewhat", "unventilated garage, which is quite warm and humid during the", "somewhat concerned about harmful emissions so would like a solution", "the machine or something added. I'm thinking I will run", "quite warm and humid during the summer in Texas. My", "I didn't really come across any scenarios like I've described", "at several options but I didn't really come across any", "so would like a solution with some sort of filtration,", "accuracy and mechanical strength over speed and volume. I'm also", "run the machine in an unventilated garage, which is quite", "like I've described and would like some advice from the", "like a solution with some sort of filtration, whether it's", "into the machine or something added. I'm thinking I will", "\\$1500-\\$2000 USD. I've looked at several options but I didn't", "would like a solution with some sort of filtration, whether", "I'm also somewhat concerned about harmful emissions so would like", "interested in printing small machine parts (gears, linkages, structural components)", "warm and humid during the summer in Texas. My price", "any scenarios like I've described and would like some advice", "linkages, structural components) so I'm looking for accuracy and mechanical", "but I didn't really come across any scenarios like I've", "and would like some advice from the experts before committing.", "I will run the machine in an unventilated garage, which", "I've looked at several options but I didn't really come", "an unventilated garage, which is quite warm and humid during", "summer in Texas. My price range is \\$1500-\\$2000 USD. I've", "emissions so would like a solution with some sort of", "over speed and volume. I'm also somewhat concerned about harmful", "components) so I'm looking for accuracy and mechanical strength over", "some advice from the experts before committing. Anyone in a", "volume. I'm also somewhat concerned about harmful emissions so would", "come across any scenarios like I've described and would like", "thinking I will run the machine in an unventilated garage,", "the experts before committing. Anyone in a similar boat have", "structural components) so I'm looking for accuracy and mechanical strength", "sort of filtration, whether it's built into the machine or", "solution with some sort of filtration, whether it's built into", "or something added. I'm thinking I will run the machine", "in Texas. My price range is \\$1500-\\$2000 USD. I've looked", "described and would like some advice from the experts before", "the summer in Texas. My price range is \\$1500-\\$2000 USD.", "speed and volume. I'm also somewhat concerned about harmful emissions", "scenarios like I've described and would like some advice from", "parts (gears, linkages, structural components) so I'm looking for accuracy", "looking for accuracy and mechanical strength over speed and volume.", "(gears, linkages, structural components) so I'm looking for accuracy and", "price range is \\$1500-\\$2000 USD. I've looked at several options", "Texas. My price range is \\$1500-\\$2000 USD. I've looked at", "from the experts before committing. Anyone in a similar boat", "small machine parts (gears, linkages, structural components) so I'm looking", "and volume. I'm also somewhat concerned about harmful emissions so", "added. I'm thinking I will run the machine in an", "strength over speed and volume. I'm also somewhat concerned about", "My price range is \\$1500-\\$2000 USD. I've looked at several", "filtration, whether it's built into the machine or something added.", "something added. I'm thinking I will run the machine in", "machine in an unventilated garage, which is quite warm and", "experts before committing. Anyone in a similar boat have any", "garage, which is quite warm and humid during the summer", "which is quite warm and humid during the summer in", "I'm looking for accuracy and mechanical strength over speed and", "really come across any scenarios like I've described and would", "so I'm looking for accuracy and mechanical strength over speed", "about harmful emissions so would like a solution with some", "during the summer in Texas. My price range is \\$1500-\\$2000", "of filtration, whether it's built into the machine or something", "the machine in an unventilated garage, which is quite warm", "I'm interested in printing small machine parts (gears, linkages, structural", "advice from the experts before committing. Anyone in a similar", "options but I didn't really come across any scenarios like", "built into the machine or something added. I'm thinking I", "whether it's built into the machine or something added. I'm", "across any scenarios like I've described and would like some", "machine or something added. I'm thinking I will run the", "is quite warm and humid during the summer in Texas." ]
[ "heat of the vulcanizer will be an issue, and the", "pt depth is desired) and that metal plate is then", "(again, 300 or so degrees, 2000 psi, or so, for", "is cured, it is impervious to the heat used in", "or so, for 8 to 10 minutes. In reading up", "send artwork off to an engraving firm to acid etch", "around 460 °F, so there doesn't seem like the heat", "460 °F, so there doesn't seem like the heat of", "used with uncured matrix boards (a bakelight type material) that", "vulcanizer heats up to 300 to 320 °F, and one", "issue, and the pressure isn't applied all at once, one", "that is \"cured\" in the vulcanizer that is then used", "points of PLA and ABS, the 200 °C equates to", "files for this type of printing, if there needs to", "artwork off to an engraving firm to acid etch the", "and that metal plate is then used with uncured matrix", "(11 pt depth is desired) and that metal plate is", "to the heat used in the vulcanizer, and the heat", "degree shoulder angle added to the file configuration, or any", "type material) that is \"cured\" in the vulcanizer that is", "then used over and over to make as many images", "art rubber stamp maker, using a vulcanizer to make art", "rubber stamps from molds that are usually created with a", "The normal process is to send artwork off to an", "the magnesium plate (11 pt depth is desired) and that", "and one usually uses 2000 to 2500 p.s.i. of pressure", "as one would want. The vulcanizer heats up to 300", "used over and over to make as many images of", "it is impervious to the heat used in the vulcanizer,", "is obtained, I'm just curious if any other stamp makers", "rubber stamp maker, using a vulcanizer to make art rubber", "boards (a bakelight type material) that is \"cured\" in the", "2000 to 2500 p.s.i. of pressure for 10 to 15", "2000 psi, or so, for 8 to 10 minutes. In", "normal process is to send artwork off to an engraving", "etch the magnesium plate (11 pt depth is desired) and", "suggestions about STL files for this type of printing, if", "stamps from molds that are usually created with a magnesium", "one would want. The vulcanizer heats up to 300 to", "uncured matrix boards (a bakelight type material) that is \"cured\"", "or 3 degree shoulder angle added to the file configuration,", "is impervious to the heat used in the vulcanizer, and", "firm to acid etch the magnesium plate (11 pt depth", "am an art rubber stamp maker, using a vulcanizer to", "plate. The normal process is to send artwork off to", "plate (11 pt depth is desired) and that metal plate", "15 minutes to cure a mold. Once the mold is", "of the vulcanizer will be an issue, and the pressure", "STL files for this type of printing, if there needs", "320 °F, and one usually uses 2000 to 2500 p.s.i.", "to be 2 or 3 degree shoulder angle added to", "p.s.i. of pressure for 10 to 15 minutes to cure", "using a vulcanizer to make art rubber stamps from molds", "for 8 to 10 minutes. In reading up about the", "stamps as one would want. The vulcanizer heats up to", "there needs to be 2 or 3 degree shoulder angle", "psi, or so, for 8 to 10 minutes. In reading", "and the pressure isn't applied all at once, one usually", "is then used over and over to make as many", "stamp makers have had success with this method and/or have", "cure a mold. Once the mold is cured, it is", "images of the rubber stamps as one would want. The", "about STL files for this type of printing, if there", "printing, if there needs to be 2 or 3 degree", "In reading up about the melting points of PLA and", "one usually allows the uncured matrix board to heat up", "usually allows the uncured matrix board to heat up before", "to heat up before the high pressure is obtained, I'm", "type of printing, if there needs to be 2 or", "molds that are usually created with a magnesium plate. The", "to an engraving firm to acid etch the magnesium plate", "curious if any other stamp makers have had success with", "magnesium plate (11 pt depth is desired) and that metal", "the vulcanizer that is then used over and over to", "with uncured matrix boards (a bakelight type material) that is", "many images of the rubber stamps as one would want.", "isn't applied all at once, one usually allows the uncured", "an engraving firm to acid etch the magnesium plate (11", "so, for 8 to 10 minutes. In reading up about", "shoulder angle added to the file configuration, or any other", "of PLA and ABS, the 200 °C equates to around", "mold is cured, it is impervious to the heat used", "the rubber stamps as one would want. The vulcanizer heats", "that is then used over and over to make as", "will be an issue, and the pressure isn't applied all", "other stamp makers have had success with this method and/or", "method and/or have any suggestions about STL files for this", "for 10 to 15 minutes to cure a mold. Once", "usually created with a magnesium plate. The normal process is", "the unvulcanized rubber (again, 300 or so degrees, 2000 psi,", "that metal plate is then used with uncured matrix boards", "with this method and/or have any suggestions about STL files", "process is to send artwork off to an engraving firm", "rubber stamps as one would want. The vulcanizer heats up", "about the melting points of PLA and ABS, the 200", "board to heat up before the high pressure is obtained,", "from molds that are usually created with a magnesium plate.", "over and over to make as many images of the", "heat used in the vulcanizer, and the heat is used", "an issue, and the pressure isn't applied all at once,", "desired) and that metal plate is then used with uncured", "art rubber stamps from molds that are usually created with", "be an issue, and the pressure isn't applied all at", "ABS, the 200 °C equates to around 460 °F, so", "so there doesn't seem like the heat of the vulcanizer", "once, one usually allows the uncured matrix board to heat", "the 200 °C equates to around 460 °F, so there", "to 300 to 320 °F, and one usually uses 2000", "applied all at once, one usually allows the uncured matrix", "a magnesium plate. The normal process is to send artwork", "to 2500 p.s.i. of pressure for 10 to 15 minutes", "make art rubber stamps from molds that are usually created", "pressure for 10 to 15 minutes to cure a mold.", "the melting points of PLA and ABS, the 200 °C", "matrix board to heat up before the high pressure is", "to 15 minutes to cure a mold. Once the mold", "to 10 minutes. In reading up about the melting points", "to cure the unvulcanized rubber (again, 300 or so degrees,", "depth is desired) and that metal plate is then used", "equates to around 460 °F, so there doesn't seem like", "the uncured matrix board to heat up before the high", "then used with uncured matrix boards (a bakelight type material)", "(a bakelight type material) that is \"cured\" in the vulcanizer", "vulcanizer to make art rubber stamps from molds that are", "is to send artwork off to an engraving firm to", "usually uses 2000 to 2500 p.s.i. of pressure for 10", "uses 2000 to 2500 p.s.i. of pressure for 10 to", "mold. Once the mold is cured, it is impervious to", "cure the unvulcanized rubber (again, 300 or so degrees, 2000", "to around 460 °F, so there doesn't seem like the", "allows the uncured matrix board to heat up before the", "one usually uses 2000 to 2500 p.s.i. of pressure for", "before the high pressure is obtained, I'm just curious if", "°F, so there doesn't seem like the heat of the", "reading up about the melting points of PLA and ABS,", "like the heat of the vulcanizer will be an issue,", "to acid etch the magnesium plate (11 pt depth is", "the vulcanizer will be an issue, and the pressure isn't", "300 to 320 °F, and one usually uses 2000 to", "heats up to 300 to 320 °F, and one usually", "of pressure for 10 to 15 minutes to cure a", "all at once, one usually allows the uncured matrix board", "obtained, I'm just curious if any other stamp makers have", "make as many images of the rubber stamps as one", "a mold. Once the mold is cured, it is impervious", "or so degrees, 2000 psi, or so, for 8 to", "an art rubber stamp maker, using a vulcanizer to make", "vulcanizer will be an issue, and the pressure isn't applied", "up to 300 to 320 °F, and one usually uses", "cured, it is impervious to the heat used in the", "The vulcanizer heats up to 300 to 320 °F, and", "engraving firm to acid etch the magnesium plate (11 pt", "if any other stamp makers have had success with this", "are usually created with a magnesium plate. The normal process", "the pressure isn't applied all at once, one usually allows", "to make art rubber stamps from molds that are usually", "8 to 10 minutes. In reading up about the melting", "if there needs to be 2 or 3 degree shoulder", "there doesn't seem like the heat of the vulcanizer will", "heat up before the high pressure is obtained, I'm just", "and/or have any suggestions about STL files for this type", "the vulcanizer, and the heat is used to cure the", "have any suggestions about STL files for this type of", "bakelight type material) that is \"cured\" in the vulcanizer that", "minutes to cure a mold. Once the mold is cured,", "the high pressure is obtained, I'm just curious if any", "to send artwork off to an engraving firm to acid", "in the vulcanizer, and the heat is used to cure", "vulcanizer that is then used over and over to make", "of the rubber stamps as one would want. The vulcanizer", "the mold is cured, it is impervious to the heat", "material) that is \"cured\" in the vulcanizer that is then", "impervious to the heat used in the vulcanizer, and the", "so degrees, 2000 psi, or so, for 8 to 10", "created with a magnesium plate. The normal process is to", "uncured matrix board to heat up before the high pressure", "pressure isn't applied all at once, one usually allows the", "stamp maker, using a vulcanizer to make art rubber stamps", "2 or 3 degree shoulder angle added to the file", "to cure a mold. Once the mold is cured, it", "just curious if any other stamp makers have had success", "and over to make as many images of the rubber", "as many images of the rubber stamps as one would", "to make as many images of the rubber stamps as", "°C equates to around 460 °F, so there doesn't seem", "high pressure is obtained, I'm just curious if any other", "doesn't seem like the heat of the vulcanizer will be", "up before the high pressure is obtained, I'm just curious", "over to make as many images of the rubber stamps", "I'm just curious if any other stamp makers have had", "had success with this method and/or have any suggestions about", "have had success with this method and/or have any suggestions", "the heat is used to cure the unvulcanized rubber (again,", "\"cured\" in the vulcanizer that is then used over and", "at once, one usually allows the uncured matrix board to", "any other stamp makers have had success with this method", "success with this method and/or have any suggestions about STL", "is used to cure the unvulcanized rubber (again, 300 or", "300 or so degrees, 2000 psi, or so, for 8", "want. The vulcanizer heats up to 300 to 320 °F,", "10 to 15 minutes to cure a mold. Once the", "matrix boards (a bakelight type material) that is \"cured\" in", "Once the mold is cured, it is impervious to the", "to 320 °F, and one usually uses 2000 to 2500", "is desired) and that metal plate is then used with", "plate is then used with uncured matrix boards (a bakelight", "seem like the heat of the vulcanizer will be an", "10 minutes. In reading up about the melting points of", "pressure is obtained, I'm just curious if any other stamp", "acid etch the magnesium plate (11 pt depth is desired)", "with a magnesium plate. The normal process is to send", "rubber (again, 300 or so degrees, 2000 psi, or so,", "3 degree shoulder angle added to the file configuration, or", "minutes. In reading up about the melting points of PLA", "for this type of printing, if there needs to be", "vulcanizer, and the heat is used to cure the unvulcanized", "melting points of PLA and ABS, the 200 °C equates", "this method and/or have any suggestions about STL files for", "is then used with uncured matrix boards (a bakelight type", "PLA and ABS, the 200 °C equates to around 460", "metal plate is then used with uncured matrix boards (a", "of printing, if there needs to be 2 or 3", "degrees, 2000 psi, or so, for 8 to 10 minutes.", "makers have had success with this method and/or have any", "off to an engraving firm to acid etch the magnesium", "and the heat is used to cure the unvulcanized rubber", "a vulcanizer to make art rubber stamps from molds that", "needs to be 2 or 3 degree shoulder angle added", "in the vulcanizer that is then used over and over", "any suggestions about STL files for this type of printing,", "I am an art rubber stamp maker, using a vulcanizer", "unvulcanized rubber (again, 300 or so degrees, 2000 psi, or", "up about the melting points of PLA and ABS, the", "angle added to the file configuration, or any other suggestions.", "this type of printing, if there needs to be 2", "the heat used in the vulcanizer, and the heat is", "heat is used to cure the unvulcanized rubber (again, 300", "be 2 or 3 degree shoulder angle added to the", "that are usually created with a magnesium plate. The normal", "used to cure the unvulcanized rubber (again, 300 or so", "200 °C equates to around 460 °F, so there doesn't", "2500 p.s.i. of pressure for 10 to 15 minutes to", "magnesium plate. The normal process is to send artwork off", "and ABS, the 200 °C equates to around 460 °F,", "would want. The vulcanizer heats up to 300 to 320", "maker, using a vulcanizer to make art rubber stamps from", "is \"cured\" in the vulcanizer that is then used over", "°F, and one usually uses 2000 to 2500 p.s.i. of", "the heat of the vulcanizer will be an issue, and", "used in the vulcanizer, and the heat is used to" ]
[ "on, none of my appliances drew any current. However, the", "and the motors had stopped running. I checked the code,", "replacement? Because none of my loads seemed to draw unnecessary", "My 5A fuse though, was extremely hot. I wanted to", "0.16 amps. Is that normal? If that is normal, does", "was my fuse that had turned bad or there was", "drew about 0.16 amps. Is that normal? If that is", "had stopped heating, and the motors had stopped running. I", "bad or there was some kind of short in my", "was extremely hot. I wanted to verify whether it was", "that normal? If that is normal, does it mean that", "circuitry. With the power switched on, none of my appliances", "that the extruder had stopped heating, and the motors had", "the power switched on, none of my appliances drew any", "printer stopped printing during a few prints, and i found", "fuse needs replacement? Because none of my loads seemed to", "the RAMPS board drew about 0.16 amps. Is that normal?", "motors had stopped running. I checked the code, and nothing", "or there was some kind of short in my circuitry.", "my circuitry. With the power switched on, none of my", "I checked the code, and nothing was wrong. My 5A", "of my loads seemed to draw unnecessary current. Thanks in", "about 0.16 amps. Is that normal? If that is normal,", "none of my appliances drew any current. However, the RAMPS", "my fuse that had turned bad or there was some", "my fuse needs replacement? Because none of my loads seemed", "heating, and the motors had stopped running. I checked the", "nothing was wrong. My 5A fuse though, was extremely hot.", "whether it was my fuse that had turned bad or", "switched on, none of my appliances drew any current. However,", "verify whether it was my fuse that had turned bad", "was some kind of short in my circuitry. With the", "found that the extruder had stopped heating, and the motors", "it was my fuse that had turned bad or there", "during a few prints, and i found that the extruder", "to verify whether it was my fuse that had turned", "If that is normal, does it mean that my fuse", "the extruder had stopped heating, and the motors had stopped", "fuse though, was extremely hot. I wanted to verify whether", "extremely hot. I wanted to verify whether it was my", "needs replacement? Because none of my loads seemed to draw", "few prints, and i found that the extruder had stopped", "RAMPS board drew about 0.16 amps. Is that normal? If", "power switched on, none of my appliances drew any current.", "amps. Is that normal? If that is normal, does it", "printing during a few prints, and i found that the", "normal, does it mean that my fuse needs replacement? Because", "it mean that my fuse needs replacement? Because none of", "in my circuitry. With the power switched on, none of", "fuse that had turned bad or there was some kind", "drew any current. However, the RAMPS board drew about 0.16", "is normal, does it mean that my fuse needs replacement?", "that is normal, does it mean that my fuse needs", "I wanted to verify whether it was my fuse that", "5A fuse though, was extremely hot. I wanted to verify", "mean that my fuse needs replacement? Because none of my", "though, was extremely hot. I wanted to verify whether it", "wanted to verify whether it was my fuse that had", "was wrong. My 5A fuse though, was extremely hot. I", "none of my loads seemed to draw unnecessary current. Thanks", "appliances drew any current. However, the RAMPS board drew about", "current. However, the RAMPS board drew about 0.16 amps. Is", "does it mean that my fuse needs replacement? Because none", "However, the RAMPS board drew about 0.16 amps. Is that", "a few prints, and i found that the extruder had", "that my fuse needs replacement? Because none of my loads", "of short in my circuitry. With the power switched on,", "turned bad or there was some kind of short in", "normal? If that is normal, does it mean that my", "stopped running. I checked the code, and nothing was wrong.", "had turned bad or there was some kind of short", "the motors had stopped running. I checked the code, and", "kind of short in my circuitry. With the power switched", "and nothing was wrong. My 5A fuse though, was extremely", "and i found that the extruder had stopped heating, and", "Is that normal? If that is normal, does it mean", "hot. I wanted to verify whether it was my fuse", "code, and nothing was wrong. My 5A fuse though, was", "wrong. My 5A fuse though, was extremely hot. I wanted", "prints, and i found that the extruder had stopped heating,", "some kind of short in my circuitry. With the power", "that had turned bad or there was some kind of", "extruder had stopped heating, and the motors had stopped running.", "checked the code, and nothing was wrong. My 5A fuse", "short in my circuitry. With the power switched on, none", "board drew about 0.16 amps. Is that normal? If that", "running. I checked the code, and nothing was wrong. My", "my loads seemed to draw unnecessary current. Thanks in advance.", "my appliances drew any current. However, the RAMPS board drew", "With the power switched on, none of my appliances drew", "My printer stopped printing during a few prints, and i", "the code, and nothing was wrong. My 5A fuse though,", "Because none of my loads seemed to draw unnecessary current.", "there was some kind of short in my circuitry. With", "stopped printing during a few prints, and i found that", "any current. However, the RAMPS board drew about 0.16 amps.", "of my appliances drew any current. However, the RAMPS board", "stopped heating, and the motors had stopped running. I checked", "i found that the extruder had stopped heating, and the", "had stopped running. I checked the code, and nothing was" ]
[ "points to keep in mind when designing and printing an", "key points to keep in mind when designing and printing", "What are the key points to keep in mind when", "keep in mind when designing and printing an object that", "printing an object that is intended to hold water using", "a tea bowl, but it leaked when making it in", "PLA... What are the key points to keep in mind", "leaked when making it in PLA... What are the key", "that is intended to hold water using an FDM printer?", "it leaked when making it in PLA... What are the", "it in PLA... What are the key points to keep", "mind when designing and printing an object that is intended", "and printing an object that is intended to hold water", "are the key points to keep in mind when designing", "when designing and printing an object that is intended to", "the key points to keep in mind when designing and", "designing and printing an object that is intended to hold", "when making it in PLA... What are the key points", "object that is intended to hold water using an FDM", "an object that is intended to hold water using an", "bowl, but it leaked when making it in PLA... What", "to keep in mind when designing and printing an object", "tea bowl, but it leaked when making it in PLA...", "but it leaked when making it in PLA... What are", "in PLA... What are the key points to keep in", "I made a tea bowl, but it leaked when making", "made a tea bowl, but it leaked when making it", "in mind when designing and printing an object that is", "making it in PLA... What are the key points to" ]
[ "is the difference between a point cloud and a voxel", "in the simplest terms please what is the difference between", "can anyone explain in the simplest terms please what is", "the difference between a point cloud and a voxel mesh?", "anyone explain in the simplest terms please what is the", "what is the difference between a point cloud and a", "the simplest terms please what is the difference between a", "terms please what is the difference between a point cloud", "explain in the simplest terms please what is the difference", "please what is the difference between a point cloud and", "simplest terms please what is the difference between a point" ]
[ "printer with no support documentation. How do I determine what", "generic printer with no support documentation. How do I determine", "with no support documentation. How do I determine what firmware", "a generic printer with no support documentation. How do I", "use so that I can research how to make the", "in use so that I can research how to make", "have a generic printer with no support documentation. How do", "determine what firmware is in use so that I can", "I have a generic printer with no support documentation. How", "How do I determine what firmware is in use so", "no support documentation. How do I determine what firmware is", "I determine what firmware is in use so that I", "documentation. How do I determine what firmware is in use", "what firmware is in use so that I can research", "support documentation. How do I determine what firmware is in", "is in use so that I can research how to", "so that I can research how to make the print", "firmware is in use so that I can research how", "do I determine what firmware is in use so that", "that I can research how to make the print run?" ]
[ "very well. What could be causing this? I've printed with", "down very well. What could be causing this? I've printed", "need any other info to properly diagnose this, let me", "this, let me know. I'm using a Robo3D R1+ [![Bad", "fine. If you need any other info to properly diagnose", "printed with these settings before, and it turned out just", "with these settings before, and it turned out just fine.", "let me know. I'm using a Robo3D R1+ [![Bad Print[1]](https://i.stack.imgur.com/cT7dV.jpg)", "these settings before, and it turned out just fine. If", "the plastic down very well. What could be causing this?", "I'm getting this printing where it's not laying the plastic", "could be causing this? I've printed with these settings before,", "printing where it's not laying the plastic down very well.", "diagnose this, let me know. I'm using a Robo3D R1+", "I've printed with these settings before, and it turned out", "any other info to properly diagnose this, let me know.", "not laying the plastic down very well. What could be", "it's not laying the plastic down very well. What could", "before, and it turned out just fine. If you need", "this printing where it's not laying the plastic down very", "properly diagnose this, let me know. I'm using a Robo3D", "this? I've printed with these settings before, and it turned", "just fine. If you need any other info to properly", "settings before, and it turned out just fine. If you", "other info to properly diagnose this, let me know. I'm", "you need any other info to properly diagnose this, let", "be causing this? I've printed with these settings before, and", "laying the plastic down very well. What could be causing", "If you need any other info to properly diagnose this,", "plastic down very well. What could be causing this? I've", "to properly diagnose this, let me know. I'm using a", "getting this printing where it's not laying the plastic down", "and it turned out just fine. If you need any", "turned out just fine. If you need any other info", "where it's not laying the plastic down very well. What", "well. What could be causing this? I've printed with these", "out just fine. If you need any other info to", "causing this? I've printed with these settings before, and it", "info to properly diagnose this, let me know. I'm using", "it turned out just fine. If you need any other", "What could be causing this? I've printed with these settings" ]
[ "We manufacture artificial corals for aquarium decorations. We are trying", "decorations. We are trying to use 3D scanning and printing", "to duplicate live corals. Please see attached photos, left is", "right is coral molded using resin. The problem is lacking", "coral molded using resin. The problem is lacking detail, the", "manufacture artificial corals for aquarium decorations. We are trying to", "vs resin molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs", "coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg", "(tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin molded coral", "printed corals? Maybe using Blender 3D software? [![3D printed coral", "(left) vs resin molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left)", "lacking pores (tiny holes)\") [![3D printed coral is lacking pores", "real corals have pores (tiny holes). Can anybody please help", "[![3D printed coral (left) vs resin molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D", "is 3D printed model, right is coral molded using resin.", "3D scanning and printing to duplicate live corals. Please see", "attached photos, left is 3D printed model, right is coral", "problem is lacking detail, the real corals have pores (tiny", "is lacking pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs", "live corals. Please see attached photos, left is 3D printed", "is lacking pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking", "left is 3D printed model, right is coral molded using", "pores to the 3D printed corals? Maybe using Blender 3D", "holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny holes)\") [![3D", "the 3D printed corals? Maybe using Blender 3D software? [![3D", "detail, the real corals have pores (tiny holes). Can anybody", "Can anybody please help to add pores to the 3D", "\"3D printed coral is lacking pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed", "software? [![3D printed coral (left) vs resin molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg", "pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny", "\"3D printed coral (left) vs resin molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D", "is lacking pores (tiny holes)\") [![3D printed coral is lacking", "(tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny holes)\")", "printed coral (left) vs resin molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D printed", "resin molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores", "Maybe using Blender 3D software? [![3D printed coral (left) vs", "trying to use 3D scanning and printing to duplicate live", "The problem is lacking detail, the real corals have pores", "coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin molded coral", "holes)\") [![3D printed coral is lacking pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D", "\"3D printed coral is lacking pores (tiny holes)\") [![3D printed", "pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin molded", "have pores (tiny holes). Can anybody please help to add", "coral (left) vs resin molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral", "printed coral is lacking pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral", "pores (tiny holes). Can anybody please help to add pores", "3D printed corals? Maybe using Blender 3D software? [![3D printed", "to add pores to the 3D printed corals? Maybe using", "help to add pores to the 3D printed corals? Maybe", "aquarium decorations. We are trying to use 3D scanning and", "to the 3D printed corals? Maybe using Blender 3D software?", "(tiny holes). Can anybody please help to add pores to", "scanning and printing to duplicate live corals. Please see attached", "3D software? [![3D printed coral (left) vs resin molded coral", "printing to duplicate live corals. Please see attached photos, left", "printed coral is lacking pores (tiny holes)\") [![3D printed coral", "holes). Can anybody please help to add pores to the", "use 3D scanning and printing to duplicate live corals. Please", "see attached photos, left is 3D printed model, right is", "resin molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin", "and printing to duplicate live corals. Please see attached photos,", "printed coral is lacking pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral", "coral is lacking pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left)", "artificial corals for aquarium decorations. We are trying to use", "vs resin molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking", "(right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D", "molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny", "We are trying to use 3D scanning and printing to", "duplicate live corals. Please see attached photos, left is 3D", "(tiny holes)\") [![3D printed coral is lacking pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg", "printed coral (left) vs resin molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed", "using resin. The problem is lacking detail, the real corals", "corals. Please see attached photos, left is 3D printed model,", "corals for aquarium decorations. We are trying to use 3D", "coral (left) vs resin molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral", "[![3D printed coral is lacking pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed", "coral is lacking pores (tiny holes)\") [![3D printed coral is", "pores (tiny holes)\") [![3D printed coral is lacking pores (tiny", "coral is lacking pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is", "Please see attached photos, left is 3D printed model, right", "add pores to the 3D printed corals? Maybe using Blender", "to use 3D scanning and printing to duplicate live corals.", "lacking detail, the real corals have pores (tiny holes). Can", "molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin molded", "please help to add pores to the 3D printed corals?", "molded using resin. The problem is lacking detail, the real", "resin. The problem is lacking detail, the real corals have", "printed model, right is coral molded using resin. The problem", "holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg", "(right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin molded coral (right)\")", "3D printed model, right is coral molded using resin. The", "lacking pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin", "corals have pores (tiny holes). Can anybody please help to", "anybody please help to add pores to the 3D printed", "using Blender 3D software? [![3D printed coral (left) vs resin", "for aquarium decorations. We are trying to use 3D scanning", "lacking pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores", "is lacking detail, the real corals have pores (tiny holes).", "is coral molded using resin. The problem is lacking detail,", "photos, left is 3D printed model, right is coral molded", "(left) vs resin molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is", "corals? Maybe using Blender 3D software? [![3D printed coral (left)", "the real corals have pores (tiny holes). Can anybody please", "model, right is coral molded using resin. The problem is", "are trying to use 3D scanning and printing to duplicate", "Blender 3D software? [![3D printed coral (left) vs resin molded" ]
[ "building. Initially when i first homed it, it ran fine,", "Prusa i3v 8\" i just finished building. Initially when i", "can move x & y no problem, but Z will", "the Z axis wont move anymore. First i checked for", "from the steppers. Also unusual is the the Z axis", "endstop, its resting on its own in a spot (the", "g code for movement. The problem is now the Z", "for physical issues such as binding or nuts coming out", "on my Z axis....any thoughts? I'll update after switch install.", "y no problem, but Z will not move, there is", "there. In Pronterface i can move x & y no", "it, it ran fine, it even ran a test g", "its resting on its own in a spot (the hotend", "noise from the steppers. Also unusual is the the Z", "about 2mm off the bed). I ordered some new end", "finished building. Initially when i first homed it, it ran", "I have a Maker Farm Prusa i3v 8\" i just", "homed it, it ran fine, it even ran a test", "nuts coming out of traps, everything's OK there. In Pronterface", "to try on my Z axis....any thoughts? I'll update after", "such as binding or nuts coming out of traps, everything's", "no noise from the steppers. Also unusual is the the", "The problem is now the Z axis wont move anymore.", "physical issues such as binding or nuts coming out of", "i first homed it, it ran fine, it even ran", "end stop switches to try on my Z axis....any thoughts?", "problem is now the Z axis wont move anymore. First", "even ran a test g code for movement. The problem", "Maker Farm Prusa i3v 8\" i just finished building. Initially", "the the Z axis is not on the endstop, its", "or nuts coming out of traps, everything's OK there. In", "anymore. First i checked for physical issues such as binding", "8\" i just finished building. Initially when i first homed", "Pronterface i can move x & y no problem, but", "just finished building. Initially when i first homed it, it", "for movement. The problem is now the Z axis wont", "wont move anymore. First i checked for physical issues such", "but Z will not move, there is no noise from", "its own in a spot (the hotend is about 2mm", "Also unusual is the the Z axis is not on", "stop switches to try on my Z axis....any thoughts? I'll", "the Z axis is not on the endstop, its resting", "First i checked for physical issues such as binding or", "a spot (the hotend is about 2mm off the bed).", "Farm Prusa i3v 8\" i just finished building. Initially when", "axis wont move anymore. First i checked for physical issues", "is no noise from the steppers. Also unusual is the", "move, there is no noise from the steppers. Also unusual", "i just finished building. Initially when i first homed it,", "i3v 8\" i just finished building. Initially when i first", "not on the endstop, its resting on its own in", "of traps, everything's OK there. In Pronterface i can move", "binding or nuts coming out of traps, everything's OK there.", "problem, but Z will not move, there is no noise", "movement. The problem is now the Z axis wont move", "hotend is about 2mm off the bed). I ordered some", "it even ran a test g code for movement. The", "when i first homed it, it ran fine, it even", "try on my Z axis....any thoughts? I'll update after switch", "is now the Z axis wont move anymore. First i", "the steppers. Also unusual is the the Z axis is", "switches to try on my Z axis....any thoughts? I'll update", "in a spot (the hotend is about 2mm off the", "coming out of traps, everything's OK there. In Pronterface i", "there is no noise from the steppers. Also unusual is", "will not move, there is no noise from the steppers.", "& y no problem, but Z will not move, there", "issues such as binding or nuts coming out of traps,", "out of traps, everything's OK there. In Pronterface i can", "now the Z axis wont move anymore. First i checked", "ordered some new end stop switches to try on my", "steppers. Also unusual is the the Z axis is not", "bed). I ordered some new end stop switches to try", "unusual is the the Z axis is not on the", "ran a test g code for movement. The problem is", "OK there. In Pronterface i can move x & y", "Z axis is not on the endstop, its resting on", "on its own in a spot (the hotend is about", "Z will not move, there is no noise from the", "a Maker Farm Prusa i3v 8\" i just finished building.", "fine, it even ran a test g code for movement.", "the bed). I ordered some new end stop switches to", "move x & y no problem, but Z will not", "Z axis wont move anymore. First i checked for physical", "resting on its own in a spot (the hotend is", "some new end stop switches to try on my Z", "first homed it, it ran fine, it even ran a", "have a Maker Farm Prusa i3v 8\" i just finished", "everything's OK there. In Pronterface i can move x &", "test g code for movement. The problem is now the", "i can move x & y no problem, but Z", "it ran fine, it even ran a test g code", "I ordered some new end stop switches to try on", "is the the Z axis is not on the endstop,", "checked for physical issues such as binding or nuts coming", "the endstop, its resting on its own in a spot", "as binding or nuts coming out of traps, everything's OK", "i checked for physical issues such as binding or nuts", "on the endstop, its resting on its own in a", "a test g code for movement. The problem is now", "Initially when i first homed it, it ran fine, it", "(the hotend is about 2mm off the bed). I ordered", "new end stop switches to try on my Z axis....any", "move anymore. First i checked for physical issues such as", "is not on the endstop, its resting on its own", "traps, everything's OK there. In Pronterface i can move x", "axis is not on the endstop, its resting on its", "2mm off the bed). I ordered some new end stop", "no problem, but Z will not move, there is no", "spot (the hotend is about 2mm off the bed). I", "off the bed). I ordered some new end stop switches", "code for movement. The problem is now the Z axis", "x & y no problem, but Z will not move,", "not move, there is no noise from the steppers. Also", "is about 2mm off the bed). I ordered some new", "In Pronterface i can move x & y no problem,", "own in a spot (the hotend is about 2mm off", "ran fine, it even ran a test g code for" ]
[ "extruder. Is this because the filament that is being extruded", "soft so the gear grinds parts off? I never had", "there is to much filament dust inside the extruder. Is", "is to much filament dust inside the extruder. Is this", "home after an hour, it is printing in the air", "because there is to much filament dust inside the extruder.", "filament dust inside the extruder. Is this because the filament", "the extruder. Is this because the filament that is being", "parts off? I never had this problem before. Printer: Anet", "it is printing in the air because there is to", "Yesterday evening i have been trying to print a few", "but after coming home after an hour, it is printing", "to much filament dust inside the extruder. Is this because", "hour, it is printing in the air because there is", "few upgrades but after coming home after an hour, it", "filament that is being extruded is getting to soft so", "the gear grinds parts off? I never had this problem", "grinds parts off? I never had this problem before. Printer:", "dust inside the extruder. Is this because the filament that", "have been trying to print a few upgrades but after", "i have been trying to print a few upgrades but", "printing in the air because there is to much filament", "in the air because there is to much filament dust", "to soft so the gear grinds parts off? I never", "is printing in the air because there is to much", "after an hour, it is printing in the air because", "an hour, it is printing in the air because there", "after coming home after an hour, it is printing in", "a few upgrades but after coming home after an hour,", "air because there is to much filament dust inside the", "that is being extruded is getting to soft so the", "off? I never had this problem before. Printer: Anet A8.", "print a few upgrades but after coming home after an", "the filament that is being extruded is getting to soft", "inside the extruder. Is this because the filament that is", "being extruded is getting to soft so the gear grinds", "getting to soft so the gear grinds parts off? I", "gear grinds parts off? I never had this problem before.", "been trying to print a few upgrades but after coming", "is getting to soft so the gear grinds parts off?", "because the filament that is being extruded is getting to", "extruded is getting to soft so the gear grinds parts", "Is this because the filament that is being extruded is", "the air because there is to much filament dust inside", "coming home after an hour, it is printing in the", "this because the filament that is being extruded is getting", "evening i have been trying to print a few upgrades", "much filament dust inside the extruder. Is this because the", "to print a few upgrades but after coming home after", "so the gear grinds parts off? I never had this", "trying to print a few upgrades but after coming home", "upgrades but after coming home after an hour, it is", "is being extruded is getting to soft so the gear" ]
[ "surfaces. I understand why it does this, but is there", "does this, but is there a way (beyond printing with", "printing with no infill\\) to get a little more horizontal", "horizontal or near horizontal surfaces. I understand why it does", "it does this, but is there a way (beyond printing", "nonfunctional prints, but it tends to leave gaps in horizontal", "out of it? \\Is the answer to this literally just", "I understand why it does this, but is there a", "prints, but it tends to leave gaps in horizontal or", "of it? \\Is the answer to this literally just \"Try", "little more horizontal coverage out of it? \\Is the answer", "it tends to leave gaps in horizontal or near horizontal", "get a little more horizontal coverage out of it? \\Is", "infill\\) to get a little more horizontal coverage out of", "outline corkscrew printing mode) for quick nonfunctional prints, but it", "for quick nonfunctional prints, but it tends to leave gaps", "in horizontal or near horizontal surfaces. I understand why it", "with no infill\\) to get a little more horizontal coverage", "is there a way (beyond printing with no infill\\) to", "or near horizontal surfaces. I understand why it does this,", "more horizontal coverage out of it? \\Is the answer to", "near horizontal surfaces. I understand why it does this, but", "the answer to this literally just \"Try to print without", "(beyond printing with no infill\\) to get a little more", "using \"Vase Mode\" (or single outline corkscrew printing mode) for", "quick nonfunctional prints, but it tends to leave gaps in", "way (beyond printing with no infill\\) to get a little", "horizontal surfaces. I understand why it does this, but is", "there a way (beyond printing with no infill\\) to get", "\\Is the answer to this literally just \"Try to print", "answer to this literally just \"Try to print without infill?\"", "but is there a way (beyond printing with no infill\\)", "no infill\\) to get a little more horizontal coverage out", "corkscrew printing mode) for quick nonfunctional prints, but it tends", "to get a little more horizontal coverage out of it?", "this, but is there a way (beyond printing with no", "mode) for quick nonfunctional prints, but it tends to leave", "gaps in horizontal or near horizontal surfaces. I understand why", "\"Vase Mode\" (or single outline corkscrew printing mode) for quick", "leave gaps in horizontal or near horizontal surfaces. I understand", "to leave gaps in horizontal or near horizontal surfaces. I", "understand why it does this, but is there a way", "horizontal coverage out of it? \\Is the answer to this", "coverage out of it? \\Is the answer to this literally", "(or single outline corkscrew printing mode) for quick nonfunctional prints,", "printing mode) for quick nonfunctional prints, but it tends to", "single outline corkscrew printing mode) for quick nonfunctional prints, but", "Mode\" (or single outline corkscrew printing mode) for quick nonfunctional", "tends to leave gaps in horizontal or near horizontal surfaces.", "a little more horizontal coverage out of it? \\Is the", "it? \\Is the answer to this literally just \"Try to", "like using \"Vase Mode\" (or single outline corkscrew printing mode)", "I like using \"Vase Mode\" (or single outline corkscrew printing", "but it tends to leave gaps in horizontal or near", "why it does this, but is there a way (beyond", "a way (beyond printing with no infill\\) to get a" ]
[ "have change firmware and stepping of motor advise if anyone", "change firmware and stepping of motor advise if anyone know", "new printer it is not printing circles correctly although I", "it is not printing circles correctly although I have change", "am having issue with my new printer it is not", "issue with my new printer it is not printing circles", "firmware and stepping of motor advise if anyone know the", "advise if anyone know the solution. [![enter image description here](https://i.stack.imgur.com/7egRT.jpg)](https://i.stack.imgur.com/7egRT.jpg)", "my new printer it is not printing circles correctly although", "although I have change firmware and stepping of motor advise", "and stepping of motor advise if anyone know the solution.", "having issue with my new printer it is not printing", "printing circles correctly although I have change firmware and stepping", "printer it is not printing circles correctly although I have", "stepping of motor advise if anyone know the solution. [![enter", "with my new printer it is not printing circles correctly", "motor advise if anyone know the solution. [![enter image description", "I have change firmware and stepping of motor advise if", "I am having issue with my new printer it is", "is not printing circles correctly although I have change firmware", "not printing circles correctly although I have change firmware and", "circles correctly although I have change firmware and stepping of", "correctly although I have change firmware and stepping of motor", "of motor advise if anyone know the solution. [![enter image" ]
[ "large bed (if needed to be configured)? 2. Which is", "a large bed with a single extruder. But did manage", "a lot of trial & plenty of error. Still I", "followed this, [YouTube - Setting Up Auto Bed Leveling (Tevo", "Up Auto Bed Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting up the", "and I broke the hot end holder plastic plate... ---", "to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only dual extruders - both regular", "extruders - both regular & large bed, 2. There is", "extruder. But did manage to restore firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1.", "stock firmware for a single extruder regular/large bed firmware &", "error. Still I am puzzled to get good prints. 1.", "restore firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So the [Tevo 3D Printing", "even more, see [Tevo Tarantula incorrectly auto leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling).", "JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed this, [YouTube - Setting Up", "Still I am puzzled to get good prints. 1. What", "V1.4` and have done a lot of trial & plenty", "out there. I did not manage to configure a large", "did manage to restore firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So the", "plastic plate... --- EDIT: The sensor I'm using is [SN04-N", "configure a large bed (if needed to be configured)? 2.", "of trying to manually level the bed and I broke", "- both regular & large bed, 2. There is JimBrown's", "be configured)? 2. Which is the auto bed leveling firmware?", "configured)? 2. Which is the auto bed leveling firmware? I", "messed-up even more, see [Tevo Tarantula incorrectly auto leveling of", "2. Which is the auto bed leveling firmware? I need", "single extruder. But did manage to restore firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/)", "I have a Tarantula Tevo i3 `MKS Base V1.4` and", "works! I have a Tarantula Tevo i3 `MKS Base V1.4`", "to get something decent printed for days but nothing works!", "a large bed (if needed to be configured)? 2. Which", "GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed this, [YouTube - Setting Up Auto", "this, [YouTube - Setting Up Auto Bed Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs),", "2. There is JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized firmware for", "the auto bed leveling firmware? I need help sorting out", "sorting out what's out there. I did not manage to", "bed with a single extruder. But did manage to restore", "days but nothing works! I have a Tarantula Tevo i3", "for a single extruder regular/large bed firmware & how to", "3D printers based on the Arduino platform, 3. JoelLisenby's GitHub", "the bed and I broke the hot end holder plastic", "I've been trying to get something decent printed for days", "bed leveling sensor but it just got me messed-up even", "[YouTube - Setting Up Auto Bed Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for", "Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only dual", "up the auto bed leveling sensor but it just got", "Base V1.4` and have done a lot of trial &", "firmware? I need help sorting out what's out there. I", "nothing works! I have a Tarantula Tevo i3 `MKS Base", "link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only dual extruders -", "EDIT: The sensor I'm using is [SN04-N Inductive Proximity Sensor", "bed and I broke the hot end holder plastic plate...", "get good prints. 1. What is the stock firmware for", "1. So the [Tevo 3D Printing Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs", "to restore firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So the [Tevo 3D", "the [Tevo 3D Printing Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to a", "Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting up the auto bed leveling", "level the bed and I broke the hot end holder", "manage to restore firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So the [Tevo", "the hot end holder plastic plate... --- EDIT: The sensor", "directs to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only dual extruders - both", "only dual extruders - both regular & large bed, 2.", "holder plastic plate... --- EDIT: The sensor I'm using is", "Tarantula incorrectly auto leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just now in", "something decent printed for days but nothing works! I have", "large bed with a single extruder. But did manage to", "regular & large bed, 2. There is JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula)", "The sensor I'm using is [SN04-N Inductive Proximity Sensor -", "to configure a large bed with a single extruder. But", "a Tarantula Tevo i3 `MKS Base V1.4` and have done", "regular/large bed firmware & how to configure a large bed", "to manually level the bed and I broke the hot", "GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized firmware for RepRap 3D printers based", "there. I did not manage to configure a large bed", "process of trying to manually level the bed and I", "Which is the auto bed leveling firmware? I need help", "just got me messed-up even more, see [Tevo Tarantula incorrectly", "[Tevo 3D Printing Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0)", "the process of trying to manually level the bed and", "to get good prints. 1. What is the stock firmware", "I need help sorting out what's out there. I did", "But did manage to restore firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So", "more, see [Tevo Tarantula incorrectly auto leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm", "hot end holder plastic plate... --- EDIT: The sensor I'm", "Bed Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting up the auto bed", "[dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only dual extruders - both regular & large", "of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just now in the process of trying", "lot of trial & plenty of error. Still I am", "of error. Still I am puzzled to get good prints.", "auto bed leveling firmware? I need help sorting out what's", "did not manage to configure a large bed with a", "Printing Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only", "based on the Arduino platform, 3. JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I", "`MKS Base V1.4` and have done a lot of trial", "3. JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed this, [YouTube - Setting", "leveling sensor but it just got me messed-up even more,", "I broke the hot end holder plastic plate... --- EDIT:", "but nothing works! I have a Tarantula Tevo i3 `MKS", "extruder regular/large bed firmware & how to configure a large", "configure a large bed with a single extruder. But did", "firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only dual extruders", "for RepRap 3D printers based on the Arduino platform, 3.", "auto bed leveling sensor but it just got me messed-up", "leveling firmware? I need help sorting out what's out there.", "trial & plenty of error. Still I am puzzled to", "prints. 1. What is the stock firmware for a single", "- Setting Up Auto Bed Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting", "i3 `MKS Base V1.4` and have done a lot of", "I did not manage to configure a large bed with", "firmware & how to configure a large bed (if needed", "get something decent printed for days but nothing works! I", "Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting up the auto bed leveling sensor but", "I'm just now in the process of trying to manually", "done a lot of trial & plenty of error. Still", "on the Arduino platform, 3. JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed", "me messed-up even more, see [Tevo Tarantula incorrectly auto leveling", "not manage to configure a large bed with a single", "printers based on the Arduino platform, 3. JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware).", "bed firmware & how to configure a large bed (if", "sensor but it just got me messed-up even more, see", "is JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized firmware for RepRap 3D", "dual extruders - both regular & large bed, 2. There", "Setting Up Auto Bed Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting up", "in the process of trying to manually level the bed", "plate... --- EDIT: The sensor I'm using is [SN04-N Inductive", "sensor I'm using is [SN04-N Inductive Proximity Sensor - 5mm](https://www.phidgets.com/?tier=3&catid=13&pcid=11&prodid=402)", "am puzzled to get good prints. 1. What is the", "a single extruder regular/large bed firmware & how to configure", "printed for days but nothing works! I have a Tarantula", "how to configure a large bed (if needed to be", "for days but nothing works! I have a Tarantula Tevo", "So the [Tevo 3D Printing Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to", "Optimized firmware for RepRap 3D printers based on the Arduino", "both regular & large bed, 2. There is JimBrown's GitHub", "[Tevo Tarantula incorrectly auto leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just now", "trying to manually level the bed and I broke the", "large bed, 2. There is JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized", "it just got me messed-up even more, see [Tevo Tarantula", "see [Tevo Tarantula incorrectly auto leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just", "(Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting up the auto bed leveling sensor", "bed leveling firmware? I need help sorting out what's out", "help sorting out what's out there. I did not manage", "setting up the auto bed leveling sensor but it just", "1. What is the stock firmware for a single extruder", "but it just got me messed-up even more, see [Tevo", "[Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So the [Tevo 3D Printing Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware)", "with a single extruder. But did manage to restore firmware", "what's out there. I did not manage to configure a", "needed to be configured)? 2. Which is the auto bed", "Tevo i3 `MKS Base V1.4` and have done a lot", "--- EDIT: The sensor I'm using is [SN04-N Inductive Proximity", "Auto Bed Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting up the auto", "end holder plastic plate... --- EDIT: The sensor I'm using", "(if needed to be configured)? 2. Which is the auto", "the auto bed leveling sensor but it just got me", "leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just now in the process of", "to configure a large bed (if needed to be configured)?", "manage to configure a large bed with a single extruder.", "good prints. 1. What is the stock firmware for a", "single extruder regular/large bed firmware & how to configure a", "have a Tarantula Tevo i3 `MKS Base V1.4` and have", "out what's out there. I did not manage to configure", "I am puzzled to get good prints. 1. What is", "firmware for a single extruder regular/large bed firmware & how", "platform, 3. JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed this, [YouTube -", "a single extruder. But did manage to restore firmware with", "and have done a lot of trial & plenty of", "firmware for RepRap 3D printers based on the Arduino platform,", "incorrectly auto leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just now in the", "auto leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just now in the process", "What is the stock firmware for a single extruder regular/large", "I followed this, [YouTube - Setting Up Auto Bed Leveling", "the stock firmware for a single extruder regular/large bed firmware", "just now in the process of trying to manually level", "& plenty of error. Still I am puzzled to get", "Arduino platform, 3. JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed this, [YouTube", "bed (if needed to be configured)? 2. Which is the", "with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So the [Tevo 3D Printing Store firmware", "- only dual extruders - both regular & large bed,", "a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only dual extruders - both regular &", "bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just now in the process of trying to", "decent printed for days but nothing works! I have a", "[TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed this, [YouTube - Setting Up Auto Bed", "& how to configure a large bed (if needed to", "got me messed-up even more, see [Tevo Tarantula incorrectly auto", "broke the hot end holder plastic plate... --- EDIT: The", "of trial & plenty of error. Still I am puzzled", "& large bed, 2. There is JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) -", "bed, 2. There is JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized firmware", "the Arduino platform, 3. JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed this,", "have done a lot of trial & plenty of error.", "JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized firmware for RepRap 3D printers", "firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So the [Tevo 3D Printing Store", "manually level the bed and I broke the hot end", "[MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized firmware for RepRap 3D printers based on", "to be configured)? 2. Which is the auto bed leveling", "- Optimized firmware for RepRap 3D printers based on the", "3D Printing Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) -", "now in the process of trying to manually level the", "There is JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized firmware for RepRap", "trying to get something decent printed for days but nothing", "RepRap 3D printers based on the Arduino platform, 3. JoelLisenby's", "is the auto bed leveling firmware? I need help sorting", "Tarantula Tevo i3 `MKS Base V1.4` and have done a", "puzzled to get good prints. 1. What is the stock", "been trying to get something decent printed for days but", "is the stock firmware for a single extruder regular/large bed", "plenty of error. Still I am puzzled to get good", "for setting up the auto bed leveling sensor but it", "need help sorting out what's out there. I did not" ]
[ "less 38.20mm) and all W are equal (more or less", "40.80). I expect that W and S will be 40mm.", "have make a little test with 4 dots aligned with", "I have tried diferent values of diagonal root but S", "image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here is the stl I use:", "tower. Distance W and S are the same in the", "Distance W and S are the same in the stl", "print. I have tried diferent values of diagonal root but", "is the stl I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I have replaced", "that W and S will be 40mm. How can fix", "little test with 4 dots aligned with A tower, B", "expect that W and S will be 40mm. How can", "Update: I have replaced the steper motor in tower B", "less 40.80). I expect that W and S will be", "but S always is smaller than W, and all S", "and C tower. Distance W and S are the same", "have tried diferent values of diagonal root but S always", "replaced the steper motor in tower B but same result.", "same in the stl but not in the print. I", "not in the print. I have tried diferent values of", "are equal (more or less 38.20mm) and all W are", "I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I have replaced the steper motor", "C tower. Distance W and S are the same in", "and all S are equal (more or less 38.20mm) and", "S are equal (more or less 38.20mm) and all W", "test with 4 dots aligned with A tower, B and", "can fix this problem? [![enter image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here", "W are equal (more or less 40.80). I expect that", "aligned with A tower, B and C tower. Distance W", "or less 38.20mm) and all W are equal (more or", "make a little test with 4 dots aligned with A", "than W, and all S are equal (more or less", "and all W are equal (more or less 40.80). I", "W, and all S are equal (more or less 38.20mm)", "of diagonal root but S always is smaller than W,", "problem? [![enter image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here is the stl", "(more or less 40.80). I expect that W and S", "dots aligned with A tower, B and C tower. Distance", "but not in the print. I have tried diferent values", "[![enter image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here is the stl I", "I expect that W and S will be 40mm. How", "W and S are the same in the stl but", "with A tower, B and C tower. Distance W and", "40mm. How can fix this problem? [![enter image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png)", "S are the same in the stl but not in", "equal (more or less 38.20mm) and all W are equal", "4 dots aligned with A tower, B and C tower.", "diferent values of diagonal root but S always is smaller", "B and C tower. Distance W and S are the", "or less 40.80). I expect that W and S will", "use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I have replaced the steper motor in", "are the same in the stl but not in the", "I have replaced the steper motor in tower B but", "diagonal root but S always is smaller than W, and", "How can fix this problem? [![enter image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update:", "all W are equal (more or less 40.80). I expect", "stl but not in the print. I have tried diferent", "Here is the stl I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I have", "and S are the same in the stl but not", "the same in the stl but not in the print.", "root but S always is smaller than W, and all", "always is smaller than W, and all S are equal", "Update: Here is the stl I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I", "equal (more or less 40.80). I expect that W and", "(more or less 38.20mm) and all W are equal (more", "fix this problem? [![enter image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here is", "values of diagonal root but S always is smaller than", "W and S will be 40mm. How can fix this", "a little test with 4 dots aligned with A tower,", "all S are equal (more or less 38.20mm) and all", "description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here is the stl I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0>", "in the stl but not in the print. I have", "tried diferent values of diagonal root but S always is", "tower, B and C tower. Distance W and S are", "is smaller than W, and all S are equal (more", "38.20mm) and all W are equal (more or less 40.80).", "I have make a little test with 4 dots aligned", "the stl I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I have replaced the", "have replaced the steper motor in tower B but same", "the stl but not in the print. I have tried", "here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here is the stl I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update:", "the print. I have tried diferent values of diagonal root", "this problem? [![enter image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here is the", "with 4 dots aligned with A tower, B and C", "A tower, B and C tower. Distance W and S", "be 40mm. How can fix this problem? [![enter image description", "<https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I have replaced the steper motor in tower", "in the print. I have tried diferent values of diagonal", "are equal (more or less 40.80). I expect that W", "smaller than W, and all S are equal (more or", "stl I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I have replaced the steper", "S will be 40mm. How can fix this problem? [![enter", "will be 40mm. How can fix this problem? [![enter image", "S always is smaller than W, and all S are", "and S will be 40mm. How can fix this problem?" ]
[ "doesn't print smooth circular objects. The objects are typically \"ribbed\"", "The picture shows the odd texture. It's at the bottom", "having this problem with my printer. It doesn't print smooth", "replacing the dang thing (not an option at all), I", "odd texture. It's at the bottom of this particular model.", "have tried fixing it in Meshmixer, I've tried Sli3r (I", "tried Sli3r (I normally use Cura 2.7). I've tried turning", "server. The picture shows the odd texture. It's at the", "sure how to fix this. I have tried fixing it", "loss for words here. My printer is a TronXY P802MA.", "Sli3r (I normally use Cura 2.7). I've tried turning down", "I've tried turning down acceleration as low as it will", "low as it will go (500 in my printer's case),", "(not an option at all), I have no idea what", "printer's case), tried slowing down the actual print and travel", "with my printer. It doesn't print smooth circular objects. The", "total loss for words here. My printer is a TronXY", "It doesn't print smooth circular objects. The objects are typically", "my print server. The picture shows the odd texture. It's", "it in Meshmixer, I've tried Sli3r (I normally use Cura", "print server. The picture shows the odd texture. It's at", "slowing down the actual print and travel speeds. Short of", "at the bottom of this particular model. For some reason,", "speeds. Short of just replacing the dang thing (not an", "the actual print and travel speeds. Short of just replacing", "at a total loss for words here. My printer is", "isn't reproduced in the partial spheres. [![Unwanted texture](https://i.stack.imgur.com/WKe5A.jpg \"Unwanted texture\")](https://i.stack.imgur.com/WKe5A.jpg", "option at all), I have no idea what to do...", "to fix this. I have tried fixing it in Meshmixer,", "(500 in my printer's case), tried slowing down the actual", "particular model. For some reason, within the pictured model, the", "and travel speeds. Short of just replacing the dang thing", "will go (500 in my printer's case), tried slowing down", "words here. My printer is a TronXY P802MA. Auto Level,", "I've tried Sli3r (I normally use Cura 2.7). I've tried", "I am not sure how to fix this. I have", "I have tried fixing it in Meshmixer, I've tried Sli3r", "tried slowing down the actual print and travel speeds. Short", "all), I have no idea what to do... I'm at", "Short of just replacing the dang thing (not an option", "texture. It's at the bottom of this particular model. For", "case), tried slowing down the actual print and travel speeds.", "(I normally use Cura 2.7). I've tried turning down acceleration", "acceleration as low as it will go (500 in my", "I'm at a total loss for words here. My printer", "not sure how to fix this. I have tried fixing", "a TronXY P802MA. Auto Level, runs Marlin firmware. I use", "It's at the bottom of this particular model. For some", "down acceleration as low as it will go (500 in", "\"ribbed\" or ridged... never smooth. I am not sure how", "my printer's case), tried slowing down the actual print and", "Cura 2.7). I've tried turning down acceleration as low as", "shows the odd texture. It's at the bottom of this", "printer. It doesn't print smooth circular objects. The objects are", "problem with my printer. It doesn't print smooth circular objects.", "are typically \"ribbed\" or ridged... never smooth. I am not", "of this particular model. For some reason, within the pictured", "typically \"ribbed\" or ridged... never smooth. I am not sure", "smooth. I am not sure how to fix this. I", "runs Marlin firmware. I use Octoprint as my print server.", "The objects are typically \"ribbed\" or ridged... never smooth. I", "fixing it in Meshmixer, I've tried Sli3r (I normally use", "I use Octoprint as my print server. The picture shows", "for words here. My printer is a TronXY P802MA. Auto", "this problem with my printer. It doesn't print smooth circular", "TronXY P802MA. Auto Level, runs Marlin firmware. I use Octoprint", "some reason, within the pictured model, the problem isn't reproduced", "the pictured model, the problem isn't reproduced in the partial", "Octoprint as my print server. The picture shows the odd", "dang thing (not an option at all), I have no", "bottom of this particular model. For some reason, within the", "turning down acceleration as low as it will go (500", "travel speeds. Short of just replacing the dang thing (not", "the odd texture. It's at the bottom of this particular", "do... I'm at a total loss for words here. My", "have no idea what to do... I'm at a total", "printer is a TronXY P802MA. Auto Level, runs Marlin firmware.", "is a TronXY P802MA. Auto Level, runs Marlin firmware. I", "Level, runs Marlin firmware. I use Octoprint as my print", "print and travel speeds. Short of just replacing the dang", "here. My printer is a TronXY P802MA. Auto Level, runs", "My printer is a TronXY P802MA. Auto Level, runs Marlin", "within the pictured model, the problem isn't reproduced in the", "firmware. I use Octoprint as my print server. The picture", "a total loss for words here. My printer is a", "model. For some reason, within the pictured model, the problem", "am having this problem with my printer. It doesn't print", "reproduced in the partial spheres. [![Unwanted texture](https://i.stack.imgur.com/WKe5A.jpg \"Unwanted texture\")](https://i.stack.imgur.com/WKe5A.jpg \"Unwanted", "am not sure how to fix this. I have tried", "the dang thing (not an option at all), I have", "to do... I'm at a total loss for words here.", "the bottom of this particular model. For some reason, within", "smooth circular objects. The objects are typically \"ribbed\" or ridged...", "this. I have tried fixing it in Meshmixer, I've tried", "fix this. I have tried fixing it in Meshmixer, I've", "objects are typically \"ribbed\" or ridged... never smooth. I am", "Marlin firmware. I use Octoprint as my print server. The", "my printer. It doesn't print smooth circular objects. The objects", "tried turning down acceleration as low as it will go", "as my print server. The picture shows the odd texture.", "thing (not an option at all), I have no idea", "print smooth circular objects. The objects are typically \"ribbed\" or", "actual print and travel speeds. Short of just replacing the", "at all), I have no idea what to do... I'm", "2.7). I've tried turning down acceleration as low as it", "down the actual print and travel speeds. Short of just", "use Octoprint as my print server. The picture shows the", "picture shows the odd texture. It's at the bottom of", "circular objects. The objects are typically \"ribbed\" or ridged... never", "just replacing the dang thing (not an option at all),", "in my printer's case), tried slowing down the actual print", "problem isn't reproduced in the partial spheres. [![Unwanted texture](https://i.stack.imgur.com/WKe5A.jpg \"Unwanted", "objects. The objects are typically \"ribbed\" or ridged... never smooth.", "tried fixing it in Meshmixer, I've tried Sli3r (I normally", "in Meshmixer, I've tried Sli3r (I normally use Cura 2.7).", "For some reason, within the pictured model, the problem isn't", "this particular model. For some reason, within the pictured model,", "an option at all), I have no idea what to", "never smooth. I am not sure how to fix this.", "as it will go (500 in my printer's case), tried", "Meshmixer, I've tried Sli3r (I normally use Cura 2.7). I've", "or ridged... never smooth. I am not sure how to", "I have no idea what to do... I'm at a", "pictured model, the problem isn't reproduced in the partial spheres.", "ridged... never smooth. I am not sure how to fix", "no idea what to do... I'm at a total loss", "Auto Level, runs Marlin firmware. I use Octoprint as my", "use Cura 2.7). I've tried turning down acceleration as low", "model, the problem isn't reproduced in the partial spheres. [![Unwanted", "reason, within the pictured model, the problem isn't reproduced in", "it will go (500 in my printer's case), tried slowing", "normally use Cura 2.7). I've tried turning down acceleration as", "idea what to do... I'm at a total loss for", "what to do... I'm at a total loss for words", "go (500 in my printer's case), tried slowing down the", "in the partial spheres. [![Unwanted texture](https://i.stack.imgur.com/WKe5A.jpg \"Unwanted texture\")](https://i.stack.imgur.com/WKe5A.jpg \"Unwanted texture\")", "as low as it will go (500 in my printer's", "how to fix this. I have tried fixing it in", "the problem isn't reproduced in the partial spheres. [![Unwanted texture](https://i.stack.imgur.com/WKe5A.jpg", "I am having this problem with my printer. It doesn't", "P802MA. Auto Level, runs Marlin firmware. I use Octoprint as", "of just replacing the dang thing (not an option at" ]
[ "planning to use them with NanoDLP on Raswgesrh + GRBL", "driven by arduino or Raswgesrh. I'm planning to use them", "Raswgesrh. I'm planning to use them with NanoDLP on Raswgesrh", "I feel this step should be automated somehow. Is there", "they require high power and can't be directly driven by", "and can't be directly driven by arduino or Raswgesrh. I'm", "UV LEDs. I use a 20A relay to power them", "(send digital 0/GND) when the print ends? The other way", "the relay when the print starts and power it off", "own DLP printer with UV LEDs. I use a 20A", "relay to power them on, since they require high power", "or Raswgesrh. I'm planning to use them with NanoDLP on", "digital 1/+5V) the relay when the print starts and power", "building my own DLP printer with UV LEDs. I use", "an on/off switch and do it manually, but I feel", "+ GRBL on Asquine. Is it possible to make NanoDLP", "be directly driven by arduino or Raswgesrh. I'm planning to", "since they require high power and can't be directly driven", "to use them with NanoDLP on Raswgesrh + GRBL on", "feel this step should be automated somehow. Is there a", "Asquine. Is it possible to make NanoDLP tell GRBL to", "other way would be to just install an on/off switch", "can't be directly driven by arduino or Raswgesrh. I'm planning", "power on (send digital 1/+5V) the relay when the print", "require high power and can't be directly driven by arduino", "and do it manually, but I feel this step should", "step should be automated somehow. Is there a way to", "DLP printer with UV LEDs. I use a 20A relay", "install an on/off switch and do it manually, but I", "directly driven by arduino or Raswgesrh. I'm planning to use", "the print ends? The other way would be to just", "to power on (send digital 1/+5V) the relay when the", "be to just install an on/off switch and do it", "the print starts and power it off (send digital 0/GND)", "The other way would be to just install an on/off", "to just install an on/off switch and do it manually,", "it off (send digital 0/GND) when the print ends? The", "with UV LEDs. I use a 20A relay to power", "them on, since they require high power and can't be", "but I feel this step should be automated somehow. Is", "(send digital 1/+5V) the relay when the print starts and", "NanoDLP on Raswgesrh + GRBL on Asquine. Is it possible", "on/off switch and do it manually, but I feel this", "to power them on, since they require high power and", "tell GRBL to power on (send digital 1/+5V) the relay", "this step should be automated somehow. Is there a way", "my own DLP printer with UV LEDs. I use a", "use a 20A relay to power them on, since they", "0/GND) when the print ends? The other way would be", "should be automated somehow. Is there a way to do", "LEDs. I use a 20A relay to power them on,", "use them with NanoDLP on Raswgesrh + GRBL on Asquine.", "possible to make NanoDLP tell GRBL to power on (send", "on, since they require high power and can't be directly", "power them on, since they require high power and can't", "off (send digital 0/GND) when the print ends? The other", "them with NanoDLP on Raswgesrh + GRBL on Asquine. Is", "starts and power it off (send digital 0/GND) when the", "digital 0/GND) when the print ends? The other way would", "Is it possible to make NanoDLP tell GRBL to power", "printer with UV LEDs. I use a 20A relay to", "print starts and power it off (send digital 0/GND) when", "ends? The other way would be to just install an", "I'm building my own DLP printer with UV LEDs. I", "on (send digital 1/+5V) the relay when the print starts", "manually, but I feel this step should be automated somehow.", "GRBL on Asquine. Is it possible to make NanoDLP tell", "make NanoDLP tell GRBL to power on (send digital 1/+5V)", "on Raswgesrh + GRBL on Asquine. Is it possible to", "high power and can't be directly driven by arduino or", "power and can't be directly driven by arduino or Raswgesrh.", "print ends? The other way would be to just install", "switch and do it manually, but I feel this step", "arduino or Raswgesrh. I'm planning to use them with NanoDLP", "I use a 20A relay to power them on, since", "would be to just install an on/off switch and do", "way would be to just install an on/off switch and", "do it manually, but I feel this step should be", "to make NanoDLP tell GRBL to power on (send digital", "just install an on/off switch and do it manually, but", "be automated somehow. Is there a way to do it?", "a 20A relay to power them on, since they require", "NanoDLP tell GRBL to power on (send digital 1/+5V) the", "I'm planning to use them with NanoDLP on Raswgesrh +", "Raswgesrh + GRBL on Asquine. Is it possible to make", "power it off (send digital 0/GND) when the print ends?", "it possible to make NanoDLP tell GRBL to power on", "20A relay to power them on, since they require high", "and power it off (send digital 0/GND) when the print", "it manually, but I feel this step should be automated", "when the print starts and power it off (send digital", "1/+5V) the relay when the print starts and power it", "on Asquine. Is it possible to make NanoDLP tell GRBL", "when the print ends? The other way would be to", "relay when the print starts and power it off (send", "with NanoDLP on Raswgesrh + GRBL on Asquine. Is it", "by arduino or Raswgesrh. I'm planning to use them with", "GRBL to power on (send digital 1/+5V) the relay when" ]
[ "new firmware that works or editing the code to make", "firmware I am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm on MacOS Sierra 10.12.5", "axis was mirrored and the home point was way off.", "on the machine wasn't very good. The x axis was", "Uploading new firmware that works or editing the code to", "get new firmware on. The firmware that was loaded on", "experience with this machine? Uploading new firmware that works or", "but don't have any experience on what to edit in", "it work for this machine. Does anyone have any experience", "way off. I was looking into Marlin to put on", "Does anyone have any experience with this machine? Uploading new", "I am trying to get new firmware on. The firmware", "I am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm on MacOS Sierra 10.12.5 using", "any experience on what to edit in the code to", "it work for this machine. I appreciate any help! Here", "machine, but don't have any experience on what to edit", "have any experience on what to edit in the code", "the machine, but don't have any experience on what to", "appreciate any help! Here is a link to [the firmware", "am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm on MacOS Sierra 10.12.5 using the", "trying to get new firmware on. The firmware that was", "Here is a link to [the firmware I am currently", "or editing the code to make it work for this", "the machine wasn't very good. The x axis was mirrored", "for this machine. Does anyone have any experience with this", "to make it work for this machine. I appreciate any", "anyone have any experience with this machine? Uploading new firmware", "currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm on MacOS Sierra 10.12.5 using the 1.6.8", "have any experience with this machine? Uploading new firmware that", "any help! Here is a link to [the firmware I", "The x axis was mirrored and the home point was", "was looking into Marlin to put on the machine, but", "don't have any experience on what to edit in the", "the home point was way off. I was looking into", "[the firmware I am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm on MacOS Sierra", "make it work for this machine. Does anyone have any", "new firmware on. The firmware that was loaded on the", "very good. The x axis was mirrored and the home", "was mirrored and the home point was way off. I", "machine wasn't very good. The x axis was mirrored and", "is a link to [the firmware I am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware).", "wasn't very good. The x axis was mirrored and the", "the code to make it work for this machine. Does", "I'm on MacOS Sierra 10.12.5 using the 1.6.8 Arduino IDE.", "[Alunar M508 machine](https://www.alunar.net/m508-self-assembly-3d-printer.html) that I am trying to get new", "edit in the code to make it work for this", "I appreciate any help! Here is a link to [the", "to put on the machine, but don't have any experience", "that was loaded on the machine wasn't very good. The", "good. The x axis was mirrored and the home point", "home point was way off. I was looking into Marlin", "works or editing the code to make it work for", "help! Here is a link to [the firmware I am", "a [Alunar M508 machine](https://www.alunar.net/m508-self-assembly-3d-printer.html) that I am trying to get", "editing the code to make it work for this machine.", "link to [the firmware I am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm on", "off. I was looking into Marlin to put on the", "machine](https://www.alunar.net/m508-self-assembly-3d-printer.html) that I am trying to get new firmware on.", "this machine? Uploading new firmware that works or editing the", "that I am trying to get new firmware on. The", "in the code to make it work for this machine.", "on the machine, but don't have any experience on what", "point was way off. I was looking into Marlin to", "looking into Marlin to put on the machine, but don't", "a link to [the firmware I am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm", "to [the firmware I am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm on MacOS", "experience on what to edit in the code to make", "Marlin to put on the machine, but don't have any", "x axis was mirrored and the home point was way", "have a [Alunar M508 machine](https://www.alunar.net/m508-self-assembly-3d-printer.html) that I am trying to", "work for this machine. I appreciate any help! Here is", "this machine. Does anyone have any experience with this machine?", "using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm on MacOS Sierra 10.12.5 using the 1.6.8 Arduino", "M508 machine](https://www.alunar.net/m508-self-assembly-3d-printer.html) that I am trying to get new firmware", "The firmware that was loaded on the machine wasn't very", "and the home point was way off. I was looking", "was way off. I was looking into Marlin to put", "firmware that works or editing the code to make it", "firmware that was loaded on the machine wasn't very good.", "I have a [Alunar M508 machine](https://www.alunar.net/m508-self-assembly-3d-printer.html) that I am trying", "loaded on the machine wasn't very good. The x axis", "machine. I appreciate any help! Here is a link to", "that works or editing the code to make it work", "put on the machine, but don't have any experience on", "firmware on. The firmware that was loaded on the machine", "any experience with this machine? Uploading new firmware that works", "make it work for this machine. I appreciate any help!", "code to make it work for this machine. Does anyone", "am trying to get new firmware on. The firmware that", "code to make it work for this machine. I appreciate", "on. The firmware that was loaded on the machine wasn't", "for this machine. I appreciate any help! Here is a", "to edit in the code to make it work for", "machine. Does anyone have any experience with this machine? Uploading", "I was looking into Marlin to put on the machine,", "the code to make it work for this machine. I", "on what to edit in the code to make it", "to make it work for this machine. Does anyone have", "machine? Uploading new firmware that works or editing the code", "with this machine? Uploading new firmware that works or editing", "was loaded on the machine wasn't very good. The x", "into Marlin to put on the machine, but don't have", "this machine. I appreciate any help! Here is a link", "mirrored and the home point was way off. I was", "work for this machine. Does anyone have any experience with", "to get new firmware on. The firmware that was loaded", "what to edit in the code to make it work" ]
[ "or temperature? It's my first time printing TPU material, so", "if you have any photos, it would be great if", "special for printing TPU material e.g extruder or temperature? It's", "TPU material, so if you have any photos, it would", "photos, it would be great if you can share them.", "material e.g extruder or temperature? It's my first time printing", "for printing TPU material e.g extruder or temperature? It's my", "material, so if you have any photos, it would be", "It's my first time printing TPU material, so if you", "anything special for printing TPU material e.g extruder or temperature?", "you have any photos, it would be great if you", "there anything special for printing TPU material e.g extruder or", "printing TPU material e.g extruder or temperature? It's my first", "time printing TPU material, so if you have any photos,", "first time printing TPU material, so if you have any", "any photos, it would be great if you can share", "TPU material e.g extruder or temperature? It's my first time", "my first time printing TPU material, so if you have", "have any photos, it would be great if you can", "e.g extruder or temperature? It's my first time printing TPU", "Is there anything special for printing TPU material e.g extruder", "printing TPU material, so if you have any photos, it", "extruder or temperature? It's my first time printing TPU material,", "so if you have any photos, it would be great", "temperature? It's my first time printing TPU material, so if" ]
[ "this? I am printing in Hatchbox PLA at high temps.", "a lot of the quality settings dialed in pretty well,", "that constantly bugs me is removing the raft from my", "high temps. I have a heated bed, and reducing the", "pretty well, but one thing that constantly bugs me is", "Are there any settings I should look at changing to", "finished prints. I am using Repetier and I have set", "am printing in Hatchbox PLA at high temps. I have", "all, but it is still not great. Are there any", "easier to remove rafts? Does the filament affect this? I", "that did seem to help. Maybe it keeps the layers", "have a lot of the quality settings dialed in pretty", "from my finished prints. I am using Repetier and I", "printing in Hatchbox PLA at high temps. I have a", "in pretty well, but one thing that constantly bugs me", "which were impossible to remove at all, but it is", "layers on the part? Any help is greatly appreciated. Thanks.", "the layers on the raft from fusing with the layers", "now, and I have a lot of the quality settings", "I have had a 3d printer for a while now,", "on that did seem to help. Maybe it keeps the", "default 0, which were impossible to remove at all, but", "my finished prints. I am using Repetier and I have", "it is still not great. Are there any settings I", "did seem to help. Maybe it keeps the layers on", "Does the filament affect this? I am printing in Hatchbox", "raft from my finished prints. I am using Repetier and", "is still not great. Are there any settings I should", "me is removing the raft from my finished prints. I", "a while now, and I have a lot of the", "filament affect this? I am printing in Hatchbox PLA at", "and I have set the air gap to 0.2 mm.", "at all, but it is still not great. Are there", "at high temps. I have a heated bed, and reducing", "have a heated bed, and reducing the temp on that", "temp on that did seem to help. Maybe it keeps", "That led to much better results than the default 0,", "seem to help. Maybe it keeps the layers on the", "results than the default 0, which were impossible to remove", "bed, and reducing the temp on that did seem to", "a 3d printer for a while now, and I have", "thing that constantly bugs me is removing the raft from", "dialed in pretty well, but one thing that constantly bugs", "I have set the air gap to 0.2 mm. That", "prints. I am using Repetier and I have set the", "gap to 0.2 mm. That led to much better results", "to remove rafts? Does the filament affect this? I am", "0, which were impossible to remove at all, but it", "from fusing with the layers on the part? Any help", "had a 3d printer for a while now, and I", "set the air gap to 0.2 mm. That led to", "the raft from fusing with the layers on the part?", "have had a 3d printer for a while now, and", "get easier to remove rafts? Does the filament affect this?", "3d printer for a while now, and I have a", "I am using Repetier and I have set the air", "not great. Are there any settings I should look at", "to get easier to remove rafts? Does the filament affect", "but one thing that constantly bugs me is removing the", "there any settings I should look at changing to get", "Repetier and I have set the air gap to 0.2", "with the layers on the part? Any help is greatly", "changing to get easier to remove rafts? Does the filament", "impossible to remove at all, but it is still not", "fusing with the layers on the part? Any help is", "using Repetier and I have set the air gap to", "heated bed, and reducing the temp on that did seem", "remove at all, but it is still not great. Are", "reducing the temp on that did seem to help. Maybe", "raft from fusing with the layers on the part? Any", "I am printing in Hatchbox PLA at high temps. I", "0.2 mm. That led to much better results than the", "I should look at changing to get easier to remove", "in Hatchbox PLA at high temps. I have a heated", "the filament affect this? I am printing in Hatchbox PLA", "is removing the raft from my finished prints. I am", "but it is still not great. Are there any settings", "led to much better results than the default 0, which", "of the quality settings dialed in pretty well, but one", "have set the air gap to 0.2 mm. That led", "and I have a lot of the quality settings dialed", "a heated bed, and reducing the temp on that did", "temps. I have a heated bed, and reducing the temp", "constantly bugs me is removing the raft from my finished", "should look at changing to get easier to remove rafts?", "Maybe it keeps the layers on the raft from fusing", "well, but one thing that constantly bugs me is removing", "were impossible to remove at all, but it is still", "the temp on that did seem to help. Maybe it", "the layers on the part? Any help is greatly appreciated.", "it keeps the layers on the raft from fusing with", "settings dialed in pretty well, but one thing that constantly", "the air gap to 0.2 mm. That led to much", "rafts? Does the filament affect this? I am printing in", "layers on the raft from fusing with the layers on", "to remove at all, but it is still not great.", "at changing to get easier to remove rafts? Does the", "mm. That led to much better results than the default", "still not great. Are there any settings I should look", "lot of the quality settings dialed in pretty well, but", "any settings I should look at changing to get easier", "I have a heated bed, and reducing the temp on", "for a while now, and I have a lot of", "the raft from my finished prints. I am using Repetier", "remove rafts? Does the filament affect this? I am printing", "printer for a while now, and I have a lot", "to much better results than the default 0, which were", "better results than the default 0, which were impossible to", "am using Repetier and I have set the air gap", "look at changing to get easier to remove rafts? Does", "Hatchbox PLA at high temps. I have a heated bed,", "settings I should look at changing to get easier to", "the quality settings dialed in pretty well, but one thing", "affect this? I am printing in Hatchbox PLA at high", "PLA at high temps. I have a heated bed, and", "one thing that constantly bugs me is removing the raft", "than the default 0, which were impossible to remove at", "help. Maybe it keeps the layers on the raft from", "air gap to 0.2 mm. That led to much better", "to help. Maybe it keeps the layers on the raft", "keeps the layers on the raft from fusing with the", "removing the raft from my finished prints. I am using", "much better results than the default 0, which were impossible", "bugs me is removing the raft from my finished prints.", "on the raft from fusing with the layers on the", "I have a lot of the quality settings dialed in", "and reducing the temp on that did seem to help.", "while now, and I have a lot of the quality", "to 0.2 mm. That led to much better results than", "great. Are there any settings I should look at changing", "quality settings dialed in pretty well, but one thing that", "the default 0, which were impossible to remove at all," ]
[ "prototypes, and my office just bought a very cheap 3D", "tipped this thing to a 45 degree. Here are the", "office just bought a very cheap 3D printer. I'm using", "of each side. So if you laid one side flat,", "guy. We've been CNC'ing prototypes, and my office just bought", "way to 3D print an object like this, and keep", "this thing to a 45 degree. Here are the results.", "and my office just bought a very cheap 3D printer.", "an object like this, and keep the details on each", "thing to a 45 degree. Here are the results. Pretty", "zits and pops, but the surface details are quite accurate", "and pops, but the surface details are quite accurate enough", "are quite accurate enough to fit a PCB board in", "a EE designer and software guy. We've been CNC'ing prototypes,", "some Cura settings from guys and basically tipped this thing", "subtractive portion underneath it? Is there a way to 3D", "see how there is a subtractive portion underneath it? Is", "Cura as recomended, and wanted to print a piece that", "there is a subtractive portion underneath it? Is there a", "I copied some Cura settings from guys and basically tipped", "is a subtractive portion underneath it? Is there a way", "flat, you see how there is a subtractive portion underneath", "on each side?[![enter image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I copied some", "quite accurate enough to fit a PCB board in there", "both sides. Here is a screenshot of each side. So", "but the surface details are quite accurate enough to fit", "one side flat, you see how there is a subtractive", "to a 45 degree. Here are the results. Pretty good!", "a 45 degree. Here are the results. Pretty good! The", "a PCB board in there with confidence. [![enter image description", "a subtractive portion underneath it? Is there a way to", "this, and keep the details on each side?[![enter image description", "EE designer and software guy. We've been CNC'ing prototypes, and", "are the results. Pretty good! The finish has some zits", "my office just bought a very cheap 3D printer. I'm", "each side. So if you laid one side flat, you", "using Cura as recomended, and wanted to print a piece", "Apologies, I'm a EE designer and software guy. We've been", "a piece that has features on both sides. Here is", "to print a piece that has features on both sides.", "been CNC'ing prototypes, and my office just bought a very", "So if you laid one side flat, you see how", "degree. Here are the results. Pretty good! The finish has", "cheap 3D printer. I'm using Cura as recomended, and wanted", "print an object like this, and keep the details on", "portion underneath it? Is there a way to 3D print", "a very cheap 3D printer. I'm using Cura as recomended,", "3D print an object like this, and keep the details", "side?[![enter image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I copied some Cura settings", "sides. Here is a screenshot of each side. So if", "description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I copied some Cura settings from guys", "features on both sides. Here is a screenshot of each", "We've been CNC'ing prototypes, and my office just bought a", "you see how there is a subtractive portion underneath it?", "printer. I'm using Cura as recomended, and wanted to print", "basically tipped this thing to a 45 degree. Here are", "a way to 3D print an object like this, and", "45 degree. Here are the results. Pretty good! The finish", "and software guy. We've been CNC'ing prototypes, and my office", "the details on each side?[![enter image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I", "to fit a PCB board in there with confidence. [![enter", "The finish has some zits and pops, but the surface", "details on each side?[![enter image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I copied", "as recomended, and wanted to print a piece that has", "guys and basically tipped this thing to a 45 degree.", "pops, but the surface details are quite accurate enough to", "and wanted to print a piece that has features on", "image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I copied some Cura settings from", "CNC'ing prototypes, and my office just bought a very cheap", "I'm a EE designer and software guy. We've been CNC'ing", "very cheap 3D printer. I'm using Cura as recomended, and", "Pretty good! The finish has some zits and pops, but", "each side?[![enter image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I copied some Cura", "and basically tipped this thing to a 45 degree. Here", "to 3D print an object like this, and keep the", "finish has some zits and pops, but the surface details", "the surface details are quite accurate enough to fit a", "object like this, and keep the details on each side?[![enter", "I'm using Cura as recomended, and wanted to print a", "side flat, you see how there is a subtractive portion", "has some zits and pops, but the surface details are", "good! The finish has some zits and pops, but the", "accurate enough to fit a PCB board in there with", "just bought a very cheap 3D printer. I'm using Cura", "and keep the details on each side?[![enter image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg)", "from guys and basically tipped this thing to a 45", "settings from guys and basically tipped this thing to a", "a screenshot of each side. So if you laid one", "laid one side flat, you see how there is a", "is a screenshot of each side. So if you laid", "copied some Cura settings from guys and basically tipped this", "enough to fit a PCB board in there with confidence.", "the results. Pretty good! The finish has some zits and", "you laid one side flat, you see how there is", "it? Is there a way to 3D print an object", "details are quite accurate enough to fit a PCB board", "like this, and keep the details on each side?[![enter image", "here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I copied some Cura settings from guys and", "if you laid one side flat, you see how there", "surface details are quite accurate enough to fit a PCB", "there a way to 3D print an object like this,", "wanted to print a piece that has features on both", "underneath it? Is there a way to 3D print an", "UPDATE I copied some Cura settings from guys and basically", "Here is a screenshot of each side. So if you", "Cura settings from guys and basically tipped this thing to", "recomended, and wanted to print a piece that has features", "software guy. We've been CNC'ing prototypes, and my office just", "side. So if you laid one side flat, you see", "print a piece that has features on both sides. Here", "Here are the results. Pretty good! The finish has some", "some zits and pops, but the surface details are quite", "that has features on both sides. Here is a screenshot", "piece that has features on both sides. Here is a", "designer and software guy. We've been CNC'ing prototypes, and my", "PCB board in there with confidence. [![enter image description here](https://i.stack.imgur.com/4jAWN.jpg)](https://i.stack.imgur.com/4jAWN.jpg)", "keep the details on each side?[![enter image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE", "results. Pretty good! The finish has some zits and pops,", "has features on both sides. Here is a screenshot of", "how there is a subtractive portion underneath it? Is there", "bought a very cheap 3D printer. I'm using Cura as", "3D printer. I'm using Cura as recomended, and wanted to", "fit a PCB board in there with confidence. [![enter image", "Is there a way to 3D print an object like", "on both sides. Here is a screenshot of each side.", "screenshot of each side. So if you laid one side" ]
[ "assembly, where one part has features that touch other parts,", "that may be unsuitable for some rapid prototyping systems.\" If", "problems when trying to print it. What can I do?", "unsuitable for some rapid prototyping systems.\" If I save it,", "part 2 is another simple cube that is flush with", "assembly as an STL for printing, I'll get a dialog", "to print it. What can I do? I'd like to", "where you can see this phenomenon. Part 1 is just", "to be able to print my assemblies. [Here is a", "an STL for printing, I'll get a dialog from Solidworks", "prototyping systems.\" If I save it, then this STL later", "causes problems when trying to print it. What can I", "I do? I'd like to be able to print my", "noticed that if I'm making an assembly, where one part", "assembly has coincident or interfering geometry that may be unsuitable", "when trying to print it. What can I do? I'd", "other parts, then when I try to save that assembly", "trying to print it. What can I do? I'd like", "assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you can see this phenomenon. Part 1 is", "part has features that touch other parts, then when I", "Solidworks to design parts to be 3d-printed. I've noticed that", "parts, then when I try to save that assembly as", "it. What can I do? I'd like to be able", "a simple cube, and part 2 is another simple cube", "one part has features that touch other parts, then when", "be unsuitable for some rapid prototyping systems.\" If I save", "geometry that may be unsuitable for some rapid prototyping systems.\"", "using Solidworks to design parts to be 3d-printed. I've noticed", "you can see this phenomenon. Part 1 is just a", "I save it, then this STL later causes problems when", "I'm using Solidworks to design parts to be 3d-printed. I've", "saying \"This assembly has coincident or interfering geometry that may", "and part 2 is another simple cube that is flush", "that touch other parts, then when I try to save", "from Solidworks saying \"This assembly has coincident or interfering geometry", "Part 1 is just a simple cube, and part 2", "simple cube, and part 2 is another simple cube that", "assemblies. [Here is a very simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you", "a very simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you can see this", "a dialog from Solidworks saying \"This assembly has coincident or", "then when I try to save that assembly as an", "[Here is a very simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you can", "is another simple cube that is flush with part 1.", "can see this phenomenon. Part 1 is just a simple", "as an STL for printing, I'll get a dialog from", "my assemblies. [Here is a very simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where", "do? I'd like to be able to print my assemblies.", "able to print my assemblies. [Here is a very simple", "this STL later causes problems when trying to print it.", "try to save that assembly as an STL for printing,", "I'll get a dialog from Solidworks saying \"This assembly has", "or interfering geometry that may be unsuitable for some rapid", "to be 3d-printed. I've noticed that if I'm making an", "I'd like to be able to print my assemblies. [Here", "then this STL later causes problems when trying to print", "phenomenon. Part 1 is just a simple cube, and part", "rapid prototyping systems.\" If I save it, then this STL", "when I try to save that assembly as an STL", "save it, then this STL later causes problems when trying", "to save that assembly as an STL for printing, I'll", "is a very simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you can see", "for printing, I'll get a dialog from Solidworks saying \"This", "very simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you can see this phenomenon.", "may be unsuitable for some rapid prototyping systems.\" If I", "\"This assembly has coincident or interfering geometry that may be", "get a dialog from Solidworks saying \"This assembly has coincident", "design parts to be 3d-printed. I've noticed that if I'm", "be able to print my assemblies. [Here is a very", "where one part has features that touch other parts, then", "STL for printing, I'll get a dialog from Solidworks saying", "to print my assemblies. [Here is a very simple example", "parts to be 3d-printed. I've noticed that if I'm making", "1 is just a simple cube, and part 2 is", "If I save it, then this STL later causes problems", "just a simple cube, and part 2 is another simple", "some rapid prototyping systems.\" If I save it, then this", "I've noticed that if I'm making an assembly, where one", "simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you can see this phenomenon. Part", "see this phenomenon. Part 1 is just a simple cube,", "has features that touch other parts, then when I try", "an assembly, where one part has features that touch other", "example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you can see this phenomenon. Part 1", "be 3d-printed. I've noticed that if I'm making an assembly,", "cube, and part 2 is another simple cube that is", "that assembly as an STL for printing, I'll get a", "can I do? I'd like to be able to print", "What can I do? I'd like to be able to", "to design parts to be 3d-printed. I've noticed that if", "for some rapid prototyping systems.\" If I save it, then", "like to be able to print my assemblies. [Here is", "3d-printed. I've noticed that if I'm making an assembly, where", "later causes problems when trying to print it. What can", "if I'm making an assembly, where one part has features", "that if I'm making an assembly, where one part has", "has coincident or interfering geometry that may be unsuitable for", "print it. What can I do? I'd like to be", "I try to save that assembly as an STL for", "dialog from Solidworks saying \"This assembly has coincident or interfering", "features that touch other parts, then when I try to", "coincident or interfering geometry that may be unsuitable for some", "save that assembly as an STL for printing, I'll get", "2 is another simple cube that is flush with part", "print my assemblies. [Here is a very simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0)", "Solidworks saying \"This assembly has coincident or interfering geometry that", "systems.\" If I save it, then this STL later causes", "this phenomenon. Part 1 is just a simple cube, and", "it, then this STL later causes problems when trying to", "printing, I'll get a dialog from Solidworks saying \"This assembly", "interfering geometry that may be unsuitable for some rapid prototyping", "making an assembly, where one part has features that touch", "is just a simple cube, and part 2 is another", "I'm making an assembly, where one part has features that", "STL later causes problems when trying to print it. What", "touch other parts, then when I try to save that" ]