ngram
listlengths 0
10.5k
|
|---|
[
"or is it an underlying flaw of the model that won't be fixed",
"the smart extruder constantly failing and needing to be replaced under warranty. Many",
"are the initial issues with the Makerbot 5th generation's smart extruder generally considered",
"of the model, but now, one year later, I'm unable to find any",
"in later versions of the model, but now, one year later, I'm unable",
"unable to find any information about whether this was indeed the case. So:",
"alternative models in the same price range. That would be welcome, but I",
"to be the best option, because the price is right for my budget,",
"that I can only buy models that are available in Japan without a",
"because I'm generally pretty busy, so I want something that's as close to",
"for my budget, and also because I'm generally pretty busy, so I want",
"with the smart extruder constantly failing and needing to be replaced under warranty.",
"one year later, I'm unable to find any information about whether this was",
"imagine that people might want to suggest alternative models in the same price",
"the model that won't be fixed until the next generation? I imagine that",
"I can only buy models that are available in Japan without a long",
"release, which mostly focus on issues with the smart extruder constantly failing and",
"fixed in later versions of the model, but now, one year later, I'm",
"to \"plug and play\" as reasonably possible. This will be my first 3D",
"considering buying a 3D printer for work (scientific research). On paper, the Makerbot",
"the price is right for my budget, and also because I'm generally pretty",
"On paper, the Makerbot 5th generation seems to be the best option, because",
"However, any search for \"Makerbot\" brings up a raft of negative reviews from",
"a 3D printer for work (scientific research). On paper, the Makerbot 5th generation",
"budget, and also because I'm generally pretty busy, so I want something that's",
"research). On paper, the Makerbot 5th generation seems to be the best option,",
"first release, which mostly focus on issues with the smart extruder constantly failing",
"considered resolved, or is it an underlying flaw of the model that won't",
"but now, one year later, I'm unable to find any information about whether",
"of the model that won't be fixed until the next generation? I imagine",
"would be welcome, but I have an extra constraint, which is that I",
"\"Makerbot\" brings up a raft of negative reviews from around the time of",
"models in the same price range. That would be welcome, but I have",
"which mostly focus on issues with the smart extruder constantly failing and needing",
"with the technology. However, any search for \"Makerbot\" brings up a raft of",
"my budget, and also because I'm generally pretty busy, so I want something",
"and also because I'm generally pretty busy, so I want something that's as",
"focus on issues with the smart extruder constantly failing and needing to be",
"something that's as close to \"plug and play\" as reasonably possible. This will",
"failing and needing to be replaced under warranty. Many of these reviews point",
"that's as close to \"plug and play\" as reasonably possible. This will be",
"later, I'm unable to find any information about whether this was indeed the",
"price range. That would be welcome, but I have an extra constraint, which",
"be welcome, but I have an extra constraint, which is that I can",
"initial issues with the Makerbot 5th generation's smart extruder generally considered resolved, or",
"in the same price range. That would be welcome, but I have an",
"as reasonably possible. This will be my first 3D printer and I have",
"the next generation? I imagine that people might want to suggest alternative models",
"extruder constantly failing and needing to be replaced under warranty. Many of these",
"constraint, which is that I can only buy models that are available in",
"issues with the Makerbot 5th generation's smart extruder generally considered resolved, or is",
"an underlying flaw of the model that won't be fixed until the next",
"buy models that are available in Japan without a long delivery time -",
"smart extruder constantly failing and needing to be replaced under warranty. Many of",
"the technology. However, any search for \"Makerbot\" brings up a raft of negative",
"also because I'm generally pretty busy, so I want something that's as close",
"negative reviews from around the time of the 5th generation's first release, which",
"of the 5th generation's first release, which mostly focus on issues with the",
"initial \"teething\" issue which might be fixed in later versions of the model,",
"flaw of the model that won't be fixed until the next generation? I",
"that are available in Japan without a long delivery time - this probably",
"a long delivery time - this probably limits my options quite a bit.",
"I'm unable to find any information about whether this was indeed the case.",
"information about whether this was indeed the case. So: are the initial issues",
"I am considering buying a 3D printer for work (scientific research). On paper,",
"want to suggest alternative models in the same price range. That would be",
"this may be an initial \"teething\" issue which might be fixed in later",
"to suggest alternative models in the same price range. That would be welcome,",
"mostly focus on issues with the smart extruder constantly failing and needing to",
"find any information about whether this was indeed the case. So: are the",
"option, because the price is right for my budget, and also because I'm",
"as close to \"plug and play\" as reasonably possible. This will be my",
"3D printer and I have no prior experience with the technology. However, any",
"and I have no prior experience with the technology. However, any search for",
"for \"Makerbot\" brings up a raft of negative reviews from around the time",
"right for my budget, and also because I'm generally pretty busy, so I",
"So: are the initial issues with the Makerbot 5th generation's smart extruder generally",
"smart extruder generally considered resolved, or is it an underlying flaw of the",
"of these reviews point out that this may be an initial \"teething\" issue",
"models that are available in Japan without a long delivery time - this",
"replaced under warranty. Many of these reviews point out that this may be",
"Many of these reviews point out that this may be an initial \"teething\"",
"under warranty. Many of these reviews point out that this may be an",
"with the Makerbot 5th generation's smart extruder generally considered resolved, or is it",
"issue which might be fixed in later versions of the model, but now,",
"because the price is right for my budget, and also because I'm generally",
"be replaced under warranty. Many of these reviews point out that this may",
"was indeed the case. So: are the initial issues with the Makerbot 5th",
"I'm generally pretty busy, so I want something that's as close to \"plug",
"be fixed in later versions of the model, but now, one year later,",
"I have an extra constraint, which is that I can only buy models",
"next generation? I imagine that people might want to suggest alternative models in",
"will be my first 3D printer and I have no prior experience with",
"it an underlying flaw of the model that won't be fixed until the",
"may be an initial \"teething\" issue which might be fixed in later versions",
"indeed the case. So: are the initial issues with the Makerbot 5th generation's",
"but I have an extra constraint, which is that I can only buy",
"technology. However, any search for \"Makerbot\" brings up a raft of negative reviews",
"That would be welcome, but I have an extra constraint, which is that",
"first 3D printer and I have no prior experience with the technology. However,",
"only buy models that are available in Japan without a long delivery time",
"about whether this was indeed the case. So: are the initial issues with",
"work (scientific research). On paper, the Makerbot 5th generation seems to be the",
"and play\" as reasonably possible. This will be my first 3D printer and",
"reviews point out that this may be an initial \"teething\" issue which might",
"(scientific research). On paper, the Makerbot 5th generation seems to be the best",
"might be fixed in later versions of the model, but now, one year",
"versions of the model, but now, one year later, I'm unable to find",
"from around the time of the 5th generation's first release, which mostly focus",
"these reviews point out that this may be an initial \"teething\" issue which",
"the 5th generation's first release, which mostly focus on issues with the smart",
"which is that I can only buy models that are available in Japan",
"busy, so I want something that's as close to \"plug and play\" as",
"be my first 3D printer and I have no prior experience with the",
"5th generation's first release, which mostly focus on issues with the smart extruder",
"\"plug and play\" as reasonably possible. This will be my first 3D printer",
"possible. This will be my first 3D printer and I have no prior",
"are available in Japan without a long delivery time - this probably limits",
"to be replaced under warranty. Many of these reviews point out that this",
"buying a 3D printer for work (scientific research). On paper, the Makerbot 5th",
"warranty. Many of these reviews point out that this may be an initial",
"which might be fixed in later versions of the model, but now, one",
"5th generation seems to be the best option, because the price is right",
"the case. So: are the initial issues with the Makerbot 5th generation's smart",
"my first 3D printer and I have no prior experience with the technology.",
"whether this was indeed the case. So: are the initial issues with the",
"prior experience with the technology. However, any search for \"Makerbot\" brings up a",
"up a raft of negative reviews from around the time of the 5th",
"experience with the technology. However, any search for \"Makerbot\" brings up a raft",
"for work (scientific research). On paper, the Makerbot 5th generation seems to be",
"be the best option, because the price is right for my budget, and",
"search for \"Makerbot\" brings up a raft of negative reviews from around the",
"available in Japan without a long delivery time - this probably limits my",
"model, but now, one year later, I'm unable to find any information about",
"have an extra constraint, which is that I can only buy models that",
"seems to be the best option, because the price is right for my",
"the same price range. That would be welcome, but I have an extra",
"reviews from around the time of the 5th generation's first release, which mostly",
"brings up a raft of negative reviews from around the time of the",
"\"teething\" issue which might be fixed in later versions of the model, but",
"any information about whether this was indeed the case. So: are the initial",
"that won't be fixed until the next generation? I imagine that people might",
"until the next generation? I imagine that people might want to suggest alternative",
"suggest alternative models in the same price range. That would be welcome, but",
"is that I can only buy models that are available in Japan without",
"be an initial \"teething\" issue which might be fixed in later versions of",
"5th generation's smart extruder generally considered resolved, or is it an underlying flaw",
"same price range. That would be welcome, but I have an extra constraint,",
"welcome, but I have an extra constraint, which is that I can only",
"is it an underlying flaw of the model that won't be fixed until",
"the initial issues with the Makerbot 5th generation's smart extruder generally considered resolved,",
"the Makerbot 5th generation's smart extruder generally considered resolved, or is it an",
"the best option, because the price is right for my budget, and also",
"to find any information about whether this was indeed the case. So: are",
"in Japan without a long delivery time - this probably limits my options",
"be fixed until the next generation? I imagine that people might want to",
"best option, because the price is right for my budget, and also because",
"3D printer for work (scientific research). On paper, the Makerbot 5th generation seems",
"the Makerbot 5th generation seems to be the best option, because the price",
"extra constraint, which is that I can only buy models that are available",
"printer and I have no prior experience with the technology. However, any search",
"no prior experience with the technology. However, any search for \"Makerbot\" brings up",
"I imagine that people might want to suggest alternative models in the same",
"Japan without a long delivery time - this probably limits my options quite",
"point out that this may be an initial \"teething\" issue which might be",
"a raft of negative reviews from around the time of the 5th generation's",
"later versions of the model, but now, one year later, I'm unable to",
"case. So: are the initial issues with the Makerbot 5th generation's smart extruder",
"fixed until the next generation? I imagine that people might want to suggest",
"model that won't be fixed until the next generation? I imagine that people",
"the time of the 5th generation's first release, which mostly focus on issues",
"am considering buying a 3D printer for work (scientific research). On paper, the",
"year later, I'm unable to find any information about whether this was indeed",
"that people might want to suggest alternative models in the same price range.",
"generation's first release, which mostly focus on issues with the smart extruder constantly",
"the model, but now, one year later, I'm unable to find any information",
"generally considered resolved, or is it an underlying flaw of the model that",
"This will be my first 3D printer and I have no prior experience",
"won't be fixed until the next generation? I imagine that people might want",
"can only buy models that are available in Japan without a long delivery",
"have no prior experience with the technology. However, any search for \"Makerbot\" brings",
"raft of negative reviews from around the time of the 5th generation's first",
"might want to suggest alternative models in the same price range. That would",
"people might want to suggest alternative models in the same price range. That",
"constantly failing and needing to be replaced under warranty. Many of these reviews",
"is right for my budget, and also because I'm generally pretty busy, so",
"generally pretty busy, so I want something that's as close to \"plug and",
"needing to be replaced under warranty. Many of these reviews point out that",
"now, one year later, I'm unable to find any information about whether this",
"generation? I imagine that people might want to suggest alternative models in the",
"paper, the Makerbot 5th generation seems to be the best option, because the",
"printer for work (scientific research). On paper, the Makerbot 5th generation seems to",
"and needing to be replaced under warranty. Many of these reviews point out",
"on issues with the smart extruder constantly failing and needing to be replaced",
"range. That would be welcome, but I have an extra constraint, which is",
"want something that's as close to \"plug and play\" as reasonably possible. This",
"extruder generally considered resolved, or is it an underlying flaw of the model",
"this was indeed the case. So: are the initial issues with the Makerbot",
"around the time of the 5th generation's first release, which mostly focus on",
"resolved, or is it an underlying flaw of the model that won't be",
"without a long delivery time - this probably limits my options quite a",
"any search for \"Makerbot\" brings up a raft of negative reviews from around",
"price is right for my budget, and also because I'm generally pretty busy,",
"underlying flaw of the model that won't be fixed until the next generation?",
"Makerbot 5th generation's smart extruder generally considered resolved, or is it an underlying",
"generation seems to be the best option, because the price is right for",
"so I want something that's as close to \"plug and play\" as reasonably",
"issues with the smart extruder constantly failing and needing to be replaced under",
"I have no prior experience with the technology. However, any search for \"Makerbot\"",
"Makerbot 5th generation seems to be the best option, because the price is",
"that this may be an initial \"teething\" issue which might be fixed in",
"reasonably possible. This will be my first 3D printer and I have no",
"an initial \"teething\" issue which might be fixed in later versions of the",
"time of the 5th generation's first release, which mostly focus on issues with",
"play\" as reasonably possible. This will be my first 3D printer and I",
"an extra constraint, which is that I can only buy models that are",
"I want something that's as close to \"plug and play\" as reasonably possible.",
"close to \"plug and play\" as reasonably possible. This will be my first",
"generation's smart extruder generally considered resolved, or is it an underlying flaw of",
"out that this may be an initial \"teething\" issue which might be fixed",
"of negative reviews from around the time of the 5th generation's first release,",
"pretty busy, so I want something that's as close to \"plug and play\""
] |
[
"perfectly before. It feels like stopping the flow even for about 30 seconds",
"difference. I also tried few different filaments, all of them worked perfectly before.",
"I have a Printrbot Simple Metal. The extruder is getting clogged all the",
"PLA, and after a few minutes the extruder motor starts clicking again. At",
"time. I went through the process demonstrated [here](https://www.youtube.com/watch?v=L_qP5AsnQNQ) multiple times already. Heatting the",
"filament by hand. I replaced the tip already, but this didn't make any",
"but this didn't make any difference. I also tried few different filaments, all",
"get a clear flow of PLA, and after a few minutes the extruder",
"by hand. I replaced the tip already, but this didn't make any difference.",
"the filament by hand. I replaced the tip already, but this didn't make",
"didn't make any difference. I also tried few different filaments, all of them",
"motor starts clicking again. At that point, it is even hard to push",
"different filaments, all of them worked perfectly before. It feels like stopping the",
"make any difference. I also tried few different filaments, all of them worked",
"extruder and pushing different tools all the way through to make sure it",
"point, it is even hard to push in the filament by hand. I",
"clear. Every time I get a clear flow of PLA, and after a",
"clogged all the time. I went through the process demonstrated [here](https://www.youtube.com/watch?v=L_qP5AsnQNQ) multiple times",
"again. At that point, it is even hard to push in the filament",
"I get a clear flow of PLA, and after a few minutes the",
"the time. I went through the process demonstrated [here](https://www.youtube.com/watch?v=L_qP5AsnQNQ) multiple times already. Heatting",
"through the process demonstrated [here](https://www.youtube.com/watch?v=L_qP5AsnQNQ) multiple times already. Heatting the extruder and pushing",
"Metal. The extruder is getting clogged all the time. I went through the",
"few minutes the extruder motor starts clicking again. At that point, it is",
"of them worked perfectly before. It feels like stopping the flow even for",
"make sure it is completely clear. Every time I get a clear flow",
"way through to make sure it is completely clear. Every time I get",
"went through the process demonstrated [here](https://www.youtube.com/watch?v=L_qP5AsnQNQ) multiple times already. Heatting the extruder and",
"pushing different tools all the way through to make sure it is completely",
"Simple Metal. The extruder is getting clogged all the time. I went through",
"time I get a clear flow of PLA, and after a few minutes",
"extruder motor starts clicking again. At that point, it is even hard to",
"It feels like stopping the flow even for about 30 seconds would cause",
"multiple times already. Heatting the extruder and pushing different tools all the way",
"worked perfectly before. It feels like stopping the flow even for about 30",
"Heatting the extruder and pushing different tools all the way through to make",
"a clear flow of PLA, and after a few minutes the extruder motor",
"stopping the flow even for about 30 seconds would cause it to jam.",
"have a Printrbot Simple Metal. The extruder is getting clogged all the time.",
"all the time. I went through the process demonstrated [here](https://www.youtube.com/watch?v=L_qP5AsnQNQ) multiple times already.",
"process demonstrated [here](https://www.youtube.com/watch?v=L_qP5AsnQNQ) multiple times already. Heatting the extruder and pushing different tools",
"sure it is completely clear. Every time I get a clear flow of",
"Every time I get a clear flow of PLA, and after a few",
"I replaced the tip already, but this didn't make any difference. I also",
"even hard to push in the filament by hand. I replaced the tip",
"a few minutes the extruder motor starts clicking again. At that point, it",
"clear flow of PLA, and after a few minutes the extruder motor starts",
"through to make sure it is completely clear. Every time I get a",
"demonstrated [here](https://www.youtube.com/watch?v=L_qP5AsnQNQ) multiple times already. Heatting the extruder and pushing different tools all",
"few different filaments, all of them worked perfectly before. It feels like stopping",
"also tried few different filaments, all of them worked perfectly before. It feels",
"the extruder motor starts clicking again. At that point, it is even hard",
"different tools all the way through to make sure it is completely clear.",
"the process demonstrated [here](https://www.youtube.com/watch?v=L_qP5AsnQNQ) multiple times already. Heatting the extruder and pushing different",
"Printrbot Simple Metal. The extruder is getting clogged all the time. I went",
"already, but this didn't make any difference. I also tried few different filaments,",
"is completely clear. Every time I get a clear flow of PLA, and",
"after a few minutes the extruder motor starts clicking again. At that point,",
"any difference. I also tried few different filaments, all of them worked perfectly",
"starts clicking again. At that point, it is even hard to push in",
"this didn't make any difference. I also tried few different filaments, all of",
"replaced the tip already, but this didn't make any difference. I also tried",
"clicking again. At that point, it is even hard to push in the",
"a Printrbot Simple Metal. The extruder is getting clogged all the time. I",
"hard to push in the filament by hand. I replaced the tip already,",
"At that point, it is even hard to push in the filament by",
"to push in the filament by hand. I replaced the tip already, but",
"getting clogged all the time. I went through the process demonstrated [here](https://www.youtube.com/watch?v=L_qP5AsnQNQ) multiple",
"that point, it is even hard to push in the filament by hand.",
"minutes the extruder motor starts clicking again. At that point, it is even",
"flow of PLA, and after a few minutes the extruder motor starts clicking",
"all the way through to make sure it is completely clear. Every time",
"the way through to make sure it is completely clear. Every time I",
"tools all the way through to make sure it is completely clear. Every",
"tip already, but this didn't make any difference. I also tried few different",
"push in the filament by hand. I replaced the tip already, but this",
"it is completely clear. Every time I get a clear flow of PLA,",
"hand. I replaced the tip already, but this didn't make any difference. I",
"all of them worked perfectly before. It feels like stopping the flow even",
"[here](https://www.youtube.com/watch?v=L_qP5AsnQNQ) multiple times already. Heatting the extruder and pushing different tools all the",
"feels like stopping the flow even for about 30 seconds would cause it",
"the extruder and pushing different tools all the way through to make sure",
"like stopping the flow even for about 30 seconds would cause it to",
"them worked perfectly before. It feels like stopping the flow even for about",
"I went through the process demonstrated [here](https://www.youtube.com/watch?v=L_qP5AsnQNQ) multiple times already. Heatting the extruder",
"in the filament by hand. I replaced the tip already, but this didn't",
"extruder is getting clogged all the time. I went through the process demonstrated",
"is even hard to push in the filament by hand. I replaced the",
"the tip already, but this didn't make any difference. I also tried few",
"The extruder is getting clogged all the time. I went through the process",
"is getting clogged all the time. I went through the process demonstrated [here](https://www.youtube.com/watch?v=L_qP5AsnQNQ)",
"times already. Heatting the extruder and pushing different tools all the way through",
"tried few different filaments, all of them worked perfectly before. It feels like",
"filaments, all of them worked perfectly before. It feels like stopping the flow",
"before. It feels like stopping the flow even for about 30 seconds would",
"of PLA, and after a few minutes the extruder motor starts clicking again.",
"and after a few minutes the extruder motor starts clicking again. At that",
"I also tried few different filaments, all of them worked perfectly before. It",
"already. Heatting the extruder and pushing different tools all the way through to",
"to make sure it is completely clear. Every time I get a clear",
"it is even hard to push in the filament by hand. I replaced",
"completely clear. Every time I get a clear flow of PLA, and after",
"and pushing different tools all the way through to make sure it is"
] |
[
"makes for a nice finish, and any other experiences. **Caution!** [Chloroform](https://en.wikipedia.org/wiki/Chloroform) is a",
"as I have an access to a well-equipped chemical laboratory with a [fume",
"(or other solvents, as mentioned in [this](https://3dprinting.stackexchange.com/a/36/674) answer). This method is even featured",
"well-equipped chemical laboratory with a [fume hood](https://en.wikipedia.org/wiki/Fume_hood). **Disclamer:** The question is not about",
"and any other experiences. **Caution!** [Chloroform](https://en.wikipedia.org/wiki/Chloroform) is a moderately toxic chemical! I only",
"The question is not about the safety issues using chloroform vapours. It is",
"issues using chloroform vapours. It is about how obtain the best post-processing results",
"about the safety issues using chloroform vapours. It is about how obtain the",
"answer). This method is even featured on [Ultimaker website](https://ultimaker.com/en/tips-tricks/17897-vapor-treating). I would like to",
"prints. What are the practical concerns I should be aware of using chloroform",
"is even featured on [Ultimaker website](https://ultimaker.com/en/tips-tricks/17897-vapor-treating). I would like to try it on",
"a moderately toxic chemical! I only approach this method as I have an",
"be aware of using chloroform vapours? I am looking for advice concerning vaporisation",
"concerns I should be aware of using chloroform vapours? I am looking for",
"I should be aware of using chloroform vapours? I am looking for advice",
"exposition that makes for a nice finish, and any other experiences. **Caution!** [Chloroform](https://en.wikipedia.org/wiki/Chloroform)",
"PLA prints a smooth finish is treatment with chloroform vapours (or other solvents,",
"like to try it on some of my prints. What are the practical",
"only approach this method as I have an access to a well-equipped chemical",
"give PLA prints a smooth finish is treatment with chloroform vapours (or other",
"aware of using chloroform vapours? I am looking for advice concerning vaporisation temperature,",
"try it on some of my prints. What are the practical concerns I",
"mentioned in [this](https://3dprinting.stackexchange.com/a/36/674) answer). This method is even featured on [Ultimaker website](https://ultimaker.com/en/tips-tricks/17897-vapor-treating). I",
"chloroform vapours? I am looking for advice concerning vaporisation temperature, time of exposition",
"finish, and any other experiences. **Caution!** [Chloroform](https://en.wikipedia.org/wiki/Chloroform) is a moderately toxic chemical! I",
"a [fume hood](https://en.wikipedia.org/wiki/Fume_hood). **Disclamer:** The question is not about the safety issues using",
"smooth finish is treatment with chloroform vapours (or other solvents, as mentioned in",
"[Chloroform](https://en.wikipedia.org/wiki/Chloroform) is a moderately toxic chemical! I only approach this method as I",
"vapours (or other solvents, as mentioned in [this](https://3dprinting.stackexchange.com/a/36/674) answer). This method is even",
"it on some of my prints. What are the practical concerns I should",
"vapours? I am looking for advice concerning vaporisation temperature, time of exposition that",
"treatment with chloroform vapours (or other solvents, as mentioned in [this](https://3dprinting.stackexchange.com/a/36/674) answer). This",
"toxic chemical! I only approach this method as I have an access to",
"a well-equipped chemical laboratory with a [fume hood](https://en.wikipedia.org/wiki/Fume_hood). **Disclamer:** The question is not",
"would like to try it on some of my prints. What are the",
"approach this method as I have an access to a well-equipped chemical laboratory",
"concerning vaporisation temperature, time of exposition that makes for a nice finish, and",
"[this](https://3dprinting.stackexchange.com/a/36/674) answer). This method is even featured on [Ultimaker website](https://ultimaker.com/en/tips-tricks/17897-vapor-treating). I would like",
"One way to give PLA prints a smooth finish is treatment with chloroform",
"**Caution!** [Chloroform](https://en.wikipedia.org/wiki/Chloroform) is a moderately toxic chemical! I only approach this method as",
"advice concerning vaporisation temperature, time of exposition that makes for a nice finish,",
"I would like to try it on some of my prints. What are",
"to a well-equipped chemical laboratory with a [fume hood](https://en.wikipedia.org/wiki/Fume_hood). **Disclamer:** The question is",
"website](https://ultimaker.com/en/tips-tricks/17897-vapor-treating). I would like to try it on some of my prints. What",
"am looking for advice concerning vaporisation temperature, time of exposition that makes for",
"This method is even featured on [Ultimaker website](https://ultimaker.com/en/tips-tricks/17897-vapor-treating). I would like to try",
"the practical concerns I should be aware of using chloroform vapours? I am",
"using chloroform vapours. It is about how obtain the best post-processing results with",
"of using chloroform vapours? I am looking for advice concerning vaporisation temperature, time",
"other solvents, as mentioned in [this](https://3dprinting.stackexchange.com/a/36/674) answer). This method is even featured on",
"time of exposition that makes for a nice finish, and any other experiences.",
"chemical laboratory with a [fume hood](https://en.wikipedia.org/wiki/Fume_hood). **Disclamer:** The question is not about the",
"even featured on [Ultimaker website](https://ultimaker.com/en/tips-tricks/17897-vapor-treating). I would like to try it on some",
"that makes for a nice finish, and any other experiences. **Caution!** [Chloroform](https://en.wikipedia.org/wiki/Chloroform) is",
"of exposition that makes for a nice finish, and any other experiences. **Caution!**",
"I am looking for advice concerning vaporisation temperature, time of exposition that makes",
"vapours. It is about how obtain the best post-processing results with least trial-and-error.",
"this method as I have an access to a well-equipped chemical laboratory with",
"I have an access to a well-equipped chemical laboratory with a [fume hood](https://en.wikipedia.org/wiki/Fume_hood).",
"laboratory with a [fume hood](https://en.wikipedia.org/wiki/Fume_hood). **Disclamer:** The question is not about the safety",
"way to give PLA prints a smooth finish is treatment with chloroform vapours",
"with a [fume hood](https://en.wikipedia.org/wiki/Fume_hood). **Disclamer:** The question is not about the safety issues",
"as mentioned in [this](https://3dprinting.stackexchange.com/a/36/674) answer). This method is even featured on [Ultimaker website](https://ultimaker.com/en/tips-tricks/17897-vapor-treating).",
"of my prints. What are the practical concerns I should be aware of",
"with chloroform vapours (or other solvents, as mentioned in [this](https://3dprinting.stackexchange.com/a/36/674) answer). This method",
"prints a smooth finish is treatment with chloroform vapours (or other solvents, as",
"are the practical concerns I should be aware of using chloroform vapours? I",
"nice finish, and any other experiences. **Caution!** [Chloroform](https://en.wikipedia.org/wiki/Chloroform) is a moderately toxic chemical!",
"method is even featured on [Ultimaker website](https://ultimaker.com/en/tips-tricks/17897-vapor-treating). I would like to try it",
"moderately toxic chemical! I only approach this method as I have an access",
"access to a well-equipped chemical laboratory with a [fume hood](https://en.wikipedia.org/wiki/Fume_hood). **Disclamer:** The question",
"question is not about the safety issues using chloroform vapours. It is about",
"not about the safety issues using chloroform vapours. It is about how obtain",
"I only approach this method as I have an access to a well-equipped",
"on [Ultimaker website](https://ultimaker.com/en/tips-tricks/17897-vapor-treating). I would like to try it on some of my",
"chloroform vapours (or other solvents, as mentioned in [this](https://3dprinting.stackexchange.com/a/36/674) answer). This method is",
"for advice concerning vaporisation temperature, time of exposition that makes for a nice",
"any other experiences. **Caution!** [Chloroform](https://en.wikipedia.org/wiki/Chloroform) is a moderately toxic chemical! I only approach",
"is a moderately toxic chemical! I only approach this method as I have",
"[Ultimaker website](https://ultimaker.com/en/tips-tricks/17897-vapor-treating). I would like to try it on some of my prints.",
"for a nice finish, and any other experiences. **Caution!** [Chloroform](https://en.wikipedia.org/wiki/Chloroform) is a moderately",
"chloroform vapours. It is about how obtain the best post-processing results with least",
"temperature, time of exposition that makes for a nice finish, and any other",
"vaporisation temperature, time of exposition that makes for a nice finish, and any",
"hood](https://en.wikipedia.org/wiki/Fume_hood). **Disclamer:** The question is not about the safety issues using chloroform vapours.",
"some of my prints. What are the practical concerns I should be aware",
"have an access to a well-equipped chemical laboratory with a [fume hood](https://en.wikipedia.org/wiki/Fume_hood). **Disclamer:**",
"What are the practical concerns I should be aware of using chloroform vapours?",
"looking for advice concerning vaporisation temperature, time of exposition that makes for a",
"should be aware of using chloroform vapours? I am looking for advice concerning",
"finish is treatment with chloroform vapours (or other solvents, as mentioned in [this](https://3dprinting.stackexchange.com/a/36/674)",
"my prints. What are the practical concerns I should be aware of using",
"a nice finish, and any other experiences. **Caution!** [Chloroform](https://en.wikipedia.org/wiki/Chloroform) is a moderately toxic",
"[fume hood](https://en.wikipedia.org/wiki/Fume_hood). **Disclamer:** The question is not about the safety issues using chloroform",
"to try it on some of my prints. What are the practical concerns",
"method as I have an access to a well-equipped chemical laboratory with a",
"in [this](https://3dprinting.stackexchange.com/a/36/674) answer). This method is even featured on [Ultimaker website](https://ultimaker.com/en/tips-tricks/17897-vapor-treating). I would",
"chemical! I only approach this method as I have an access to a",
"is treatment with chloroform vapours (or other solvents, as mentioned in [this](https://3dprinting.stackexchange.com/a/36/674) answer).",
"is not about the safety issues using chloroform vapours. It is about how",
"the safety issues using chloroform vapours. It is about how obtain the best",
"to give PLA prints a smooth finish is treatment with chloroform vapours (or",
"practical concerns I should be aware of using chloroform vapours? I am looking",
"a smooth finish is treatment with chloroform vapours (or other solvents, as mentioned",
"an access to a well-equipped chemical laboratory with a [fume hood](https://en.wikipedia.org/wiki/Fume_hood). **Disclamer:** The",
"safety issues using chloroform vapours. It is about how obtain the best post-processing",
"on some of my prints. What are the practical concerns I should be",
"experiences. **Caution!** [Chloroform](https://en.wikipedia.org/wiki/Chloroform) is a moderately toxic chemical! I only approach this method",
"using chloroform vapours? I am looking for advice concerning vaporisation temperature, time of",
"**Disclamer:** The question is not about the safety issues using chloroform vapours. It",
"solvents, as mentioned in [this](https://3dprinting.stackexchange.com/a/36/674) answer). This method is even featured on [Ultimaker",
"other experiences. **Caution!** [Chloroform](https://en.wikipedia.org/wiki/Chloroform) is a moderately toxic chemical! I only approach this",
"featured on [Ultimaker website](https://ultimaker.com/en/tips-tricks/17897-vapor-treating). I would like to try it on some of"
] |
[
"are not aligned with one axis are also simple. Moving from x,y =",
"assume the printer has 100 steps/mm on each axis, then a move of",
"a curved move. So what is the algorithm to calculate the steps for",
"move. And just calculating the amount of steps on each axis needed to",
"Moving from x,y = 0,0 to 10,10 would be 1000 steps on x",
"movements are really simple. If we assume the printer has 100 steps/mm on",
"If we assume the printer has 100 steps/mm on each axis, then a",
"be 1000 steps on x and y. On deltas even for simple moves",
"are really simple. If we assume the printer has 100 steps/mm on each",
"even for simple moves more than one motor has to move. And just",
"calculating the amount of steps on each axis needed to reach the destination",
"of 10mm on a axis is just 1000 Steps on that axis. Movements",
"that are not aligned with one axis are also simple. Moving from x,y",
"simple. Moving from x,y = 0,0 to 10,10 would be 1000 steps on",
"not aligned with one axis are also simple. Moving from x,y = 0,0",
"probably gives a curved move. So what is the algorithm to calculate the",
"we assume the printer has 100 steps/mm on each axis, then a move",
"one motor has to move. And just calculating the amount of steps on",
"the algorithm to calculate the steps for a given move for a delta",
"printer movements are really simple. If we assume the printer has 100 steps/mm",
"then a move of 10mm on a axis is just 1000 Steps on",
"Cartesian printer movements are really simple. If we assume the printer has 100",
"0,0 to 10,10 would be 1000 steps on x and y. On deltas",
"really simple. If we assume the printer has 100 steps/mm on each axis,",
"reach the destination probably gives a curved move. So what is the algorithm",
"10,10 would be 1000 steps on x and y. On deltas even for",
"just calculating the amount of steps on each axis needed to reach the",
"more than one motor has to move. And just calculating the amount of",
"= 0,0 to 10,10 would be 1000 steps on x and y. On",
"amount of steps on each axis needed to reach the destination probably gives",
"is the algorithm to calculate the steps for a given move for a",
"steps/mm on each axis, then a move of 10mm on a axis is",
"on each axis needed to reach the destination probably gives a curved move.",
"a move of 10mm on a axis is just 1000 Steps on that",
"aligned with one axis are also simple. Moving from x,y = 0,0 to",
"motor has to move. And just calculating the amount of steps on each",
"the amount of steps on each axis needed to reach the destination probably",
"destination probably gives a curved move. So what is the algorithm to calculate",
"move. So what is the algorithm to calculate the steps for a given",
"a axis is just 1000 Steps on that axis. Movements that are not",
"a Cartesian printer movements are really simple. If we assume the printer has",
"1000 steps on x and y. On deltas even for simple moves more",
"what is the algorithm to calculate the steps for a given move for",
"the printer has 100 steps/mm on each axis, then a move of 10mm",
"And just calculating the amount of steps on each axis needed to reach",
"has to move. And just calculating the amount of steps on each axis",
"curved move. So what is the algorithm to calculate the steps for a",
"move of 10mm on a axis is just 1000 Steps on that axis.",
"axis needed to reach the destination probably gives a curved move. So what",
"algorithm to calculate the steps for a given move for a delta printer?",
"is just 1000 Steps on that axis. Movements that are not aligned with",
"steps on x and y. On deltas even for simple moves more than",
"moves more than one motor has to move. And just calculating the amount",
"one axis are also simple. Moving from x,y = 0,0 to 10,10 would",
"to reach the destination probably gives a curved move. So what is the",
"x and y. On deltas even for simple moves more than one motor",
"axis. Movements that are not aligned with one axis are also simple. Moving",
"than one motor has to move. And just calculating the amount of steps",
"has 100 steps/mm on each axis, then a move of 10mm on a",
"that axis. Movements that are not aligned with one axis are also simple.",
"On deltas even for simple moves more than one motor has to move.",
"to move. And just calculating the amount of steps on each axis needed",
"are also simple. Moving from x,y = 0,0 to 10,10 would be 1000",
"would be 1000 steps on x and y. On deltas even for simple",
"So what is the algorithm to calculate the steps for a given move",
"each axis, then a move of 10mm on a axis is just 1000",
"on each axis, then a move of 10mm on a axis is just",
"Movements that are not aligned with one axis are also simple. Moving from",
"of steps on each axis needed to reach the destination probably gives a",
"to 10,10 would be 1000 steps on x and y. On deltas even",
"on a axis is just 1000 Steps on that axis. Movements that are",
"axis is just 1000 Steps on that axis. Movements that are not aligned",
"Steps on that axis. Movements that are not aligned with one axis are",
"the destination probably gives a curved move. So what is the algorithm to",
"gives a curved move. So what is the algorithm to calculate the steps",
"with one axis are also simple. Moving from x,y = 0,0 to 10,10",
"y. On deltas even for simple moves more than one motor has to",
"from x,y = 0,0 to 10,10 would be 1000 steps on x and",
"printer has 100 steps/mm on each axis, then a move of 10mm on",
"simple. If we assume the printer has 100 steps/mm on each axis, then",
"axis are also simple. Moving from x,y = 0,0 to 10,10 would be",
"1000 Steps on that axis. Movements that are not aligned with one axis",
"just 1000 Steps on that axis. Movements that are not aligned with one",
"each axis needed to reach the destination probably gives a curved move. So",
"10mm on a axis is just 1000 Steps on that axis. Movements that",
"On a Cartesian printer movements are really simple. If we assume the printer",
"deltas even for simple moves more than one motor has to move. And",
"needed to reach the destination probably gives a curved move. So what is",
"simple moves more than one motor has to move. And just calculating the",
"axis, then a move of 10mm on a axis is just 1000 Steps",
"on x and y. On deltas even for simple moves more than one",
"for simple moves more than one motor has to move. And just calculating",
"also simple. Moving from x,y = 0,0 to 10,10 would be 1000 steps",
"100 steps/mm on each axis, then a move of 10mm on a axis",
"steps on each axis needed to reach the destination probably gives a curved",
"and y. On deltas even for simple moves more than one motor has",
"on that axis. Movements that are not aligned with one axis are also",
"x,y = 0,0 to 10,10 would be 1000 steps on x and y."
] |
[
"printer? I've seen examples of Chinese companies printing entire houses, and I'm curious",
"to printers / filaments that are intended (or at least able) be scaled",
"of Chinese companies printing entire houses, and I'm curious as to printers /",
"sourced / free is preferable; though I'm interested in **any** designs that exist,",
"I'm curious as to printers / filaments that are intended (or at least",
"3D printer? I've seen examples of Chinese companies printing entire houses, and I'm",
"I've seen examples of Chinese companies printing entire houses, and I'm curious as",
"curious if there are any designs for printers that are meant to extrude",
"our hands, so I'm curious if there are any designs for printers that",
"intended (or at least able) be scaled up for (very) large print jobs.",
"held in our hands, so I'm curious if there are any designs for",
"that can still be held in our hands, so I'm curious if there",
"printing entire houses, and I'm curious as to printers / filaments that are",
"/ filaments that are intended (or at least able) be scaled up for",
"scalable printing area. Open sourced / free is preferable; though I'm interested in",
"filaments that are intended (or at least able) be scaled up for (very)",
"Open sourced / free is preferable; though I'm interested in **any** designs that",
"Is there a definitive scalable 3D printer? I've seen examples of Chinese companies",
"free is preferable; though I'm interested in **any** designs that exist, commercial included.",
"meant to extrude material efficiently with a easily scalable printing area. Open sourced",
"there are any designs for printers that are meant to extrude material efficiently",
"curious as to printers / filaments that are intended (or at least able)",
"most hobby printers can take hundreds of hours for something that can still",
"printers can take hundreds of hours for something that can still be held",
"be scaled up for (very) large print jobs. Since most hobby printers can",
"Chinese companies printing entire houses, and I'm curious as to printers / filaments",
"scaled up for (very) large print jobs. Since most hobby printers can take",
"that are intended (or at least able) be scaled up for (very) large",
"efficiently with a easily scalable printing area. Open sourced / free is preferable;",
"still be held in our hands, so I'm curious if there are any",
"for something that can still be held in our hands, so I'm curious",
"printers / filaments that are intended (or at least able) be scaled up",
"easily scalable printing area. Open sourced / free is preferable; though I'm interested",
"area. Open sourced / free is preferable; though I'm interested in **any** designs",
"examples of Chinese companies printing entire houses, and I'm curious as to printers",
"up for (very) large print jobs. Since most hobby printers can take hundreds",
"are any designs for printers that are meant to extrude material efficiently with",
"something that can still be held in our hands, so I'm curious if",
"for printers that are meant to extrude material efficiently with a easily scalable",
"in our hands, so I'm curious if there are any designs for printers",
"as to printers / filaments that are intended (or at least able) be",
"material efficiently with a easily scalable printing area. Open sourced / free is",
"and I'm curious as to printers / filaments that are intended (or at",
"printers that are meant to extrude material efficiently with a easily scalable printing",
"scalable 3D printer? I've seen examples of Chinese companies printing entire houses, and",
"with a easily scalable printing area. Open sourced / free is preferable; though",
"entire houses, and I'm curious as to printers / filaments that are intended",
"of hours for something that can still be held in our hands, so",
"can take hundreds of hours for something that can still be held in",
"if there are any designs for printers that are meant to extrude material",
"(very) large print jobs. Since most hobby printers can take hundreds of hours",
"so I'm curious if there are any designs for printers that are meant",
"houses, and I'm curious as to printers / filaments that are intended (or",
"for (very) large print jobs. Since most hobby printers can take hundreds of",
"a definitive scalable 3D printer? I've seen examples of Chinese companies printing entire",
"a easily scalable printing area. Open sourced / free is preferable; though I'm",
"any designs for printers that are meant to extrude material efficiently with a",
"take hundreds of hours for something that can still be held in our",
"can still be held in our hands, so I'm curious if there are",
"(or at least able) be scaled up for (very) large print jobs. Since",
"/ free is preferable; though I'm interested in **any** designs that exist, commercial",
"printing area. Open sourced / free is preferable; though I'm interested in **any**",
"able) be scaled up for (very) large print jobs. Since most hobby printers",
"seen examples of Chinese companies printing entire houses, and I'm curious as to",
"to extrude material efficiently with a easily scalable printing area. Open sourced /",
"designs for printers that are meant to extrude material efficiently with a easily",
"least able) be scaled up for (very) large print jobs. Since most hobby",
"are intended (or at least able) be scaled up for (very) large print",
"hundreds of hours for something that can still be held in our hands,",
"definitive scalable 3D printer? I've seen examples of Chinese companies printing entire houses,",
"companies printing entire houses, and I'm curious as to printers / filaments that",
"be held in our hands, so I'm curious if there are any designs",
"extrude material efficiently with a easily scalable printing area. Open sourced / free",
"there a definitive scalable 3D printer? I've seen examples of Chinese companies printing",
"hobby printers can take hundreds of hours for something that can still be",
"hours for something that can still be held in our hands, so I'm",
"large print jobs. Since most hobby printers can take hundreds of hours for",
"hands, so I'm curious if there are any designs for printers that are",
"I'm curious if there are any designs for printers that are meant to",
"print jobs. Since most hobby printers can take hundreds of hours for something",
"jobs. Since most hobby printers can take hundreds of hours for something that",
"are meant to extrude material efficiently with a easily scalable printing area. Open",
"at least able) be scaled up for (very) large print jobs. Since most",
"that are meant to extrude material efficiently with a easily scalable printing area.",
"Since most hobby printers can take hundreds of hours for something that can"
] |
[
"But, I have enjoyed using it.) There is a plug-in available for SketchUp",
"plug-ins folder. And, the tech guy at the library doesn't think that the",
"it as an STL file. The process appeared to work. I could see",
"will update all the copies of SketchUp at all the branches just so",
"file not being recognized. I am not familiar with all the details in",
"dae file from SketchUp. I would then import that dae file into Bjoyder",
"the library computers. I cannot alter them. I can use what portable versions",
"(The portable version on my flash drive). I could then export it as",
"alter them. I can use what portable versions of software are out there,",
"After doing some searching on this website, I found out that I could",
"print something. (I'm really not sure why the libraries have SketchUp installed. But,",
"it gave him a message about the file not being recognized. I am",
"that it can export STL files. But, the security on the library computers",
"a file into the SketchUp plug-ins folder. And, the tech guy at the",
"just so someone could do 3D printing. After doing some searching on this",
"not familiar with all the details in the importing and exporting processes that",
"available for SketchUp so that it can export STL files. But, the security",
"found out that I could export a COLLADA / dae file from SketchUp.",
"export a COLLADA / dae file from SketchUp. I would then import that",
"all the details in the importing and exporting processes that are going on.",
"I have enjoyed using it.) There is a plug-in available for SketchUp so",
"work. I could see my test object in Bjoyder. I gave the STL",
"my flash drive). I could then export it as an STL file. The",
"details in the importing and exporting processes that are going on. Is there",
"export it as an STL file. The process appeared to work. I could",
"me some help? One problem is that, I am using the library computers.",
"is that, I am using the library computers. I cannot alter them. I",
"I can use what portable versions of software are out there, like Bjoyder.",
"But, it gave him a message about the file not being recognized. I",
"to open it in the Makerbot software so that it could be sent",
"used SketchUp on the library computers for a number of years just to",
"the library will update all the copies of SketchUp at all the branches",
"out that I could export a COLLADA / dae file from SketchUp. I",
"I am not familiar with all the details in the importing and exporting",
"I have the opportunity to actually print something. (I'm really not sure why",
"in one of the branches. I have used SketchUp on the library computers",
"have used SketchUp on the library computers for a number of years just",
"There is a plug-in available for SketchUp so that it can export STL",
"the opportunity to actually print something. (I'm really not sure why the libraries",
"that it could be sent to the printer. But, it gave him a",
"just to do artsy things. Suddenly, I have the opportunity to actually print",
"opportunity to actually print something. (I'm really not sure why the libraries have",
"do 3D printing. After doing some searching on this website, I found out",
"import that dae file into Bjoyder (The portable version on my flash drive).",
"then export it as an STL file. The process appeared to work. I",
"But, the security on the library computers will not allow me to put",
"process appeared to work. I could see my test object in Bjoyder. I",
"at all the branches just so someone could do 3D printing. After doing",
"it in the Makerbot software so that it could be sent to the",
"to do artsy things. Suddenly, I have the opportunity to actually print something.",
"be sent to the printer. But, it gave him a message about the",
"artsy things. Suddenly, I have the opportunity to actually print something. (I'm really",
"appeared to work. I could see my test object in Bjoyder. I gave",
"him a message about the file not being recognized. I am not familiar",
"using the library computers. I cannot alter them. I can use what portable",
"library will update all the copies of SketchUp at all the branches just",
"library computers for a number of years just to do artsy things. Suddenly,",
"file. The process appeared to work. I could see my test object in",
"some help? One problem is that, I am using the library computers. I",
"libraries have SketchUp installed. But, I have enjoyed using it.) There is a",
"me to put a file into the SketchUp plug-ins folder. And, the tech",
"could do 3D printing. After doing some searching on this website, I found",
"export STL files. But, the security on the library computers will not allow",
"do artsy things. Suddenly, I have the opportunity to actually print something. (I'm",
"using it.) There is a plug-in available for SketchUp so that it can",
"just put a 3D printer in one of the branches. I have used",
"it.) There is a plug-in available for SketchUp so that it can export",
"actually print something. (I'm really not sure why the libraries have SketchUp installed.",
"to work. I could see my test object in Bjoyder. I gave the",
"computers. I cannot alter them. I can use what portable versions of software",
"problem is that, I am using the library computers. I cannot alter them.",
"the library doesn't think that the IT guys at the library will update",
"to the printer. But, it gave him a message about the file not",
"cannot alter them. I can use what portable versions of software are out",
"sure why the libraries have SketchUp installed. But, I have enjoyed using it.)",
"object in Bjoyder. I gave the STL file to the branch manager who",
"there someone out there that can give me some help? One problem is",
"SketchUp at all the branches just so someone could do 3D printing. After",
"dae file into Bjoyder (The portable version on my flash drive). I could",
"of the branches. I have used SketchUp on the library computers for a",
"and exporting processes that are going on. Is there someone out there that",
"computers for a number of years just to do artsy things. Suddenly, I",
"on the library computers will not allow me to put a file into",
"I gave the STL file to the branch manager who tried to open",
"I found out that I could export a COLLADA / dae file from",
"test object in Bjoyder. I gave the STL file to the branch manager",
"gave him a message about the file not being recognized. I am not",
"Bjoyder. I gave the STL file to the branch manager who tried to",
"Bjoyder (The portable version on my flash drive). I could then export it",
"STL file to the branch manager who tried to open it in the",
"could then export it as an STL file. The process appeared to work.",
"I have used SketchUp on the library computers for a number of years",
"enjoyed using it.) There is a plug-in available for SketchUp so that it",
"system just put a 3D printer in one of the branches. I have",
"to actually print something. (I'm really not sure why the libraries have SketchUp",
"with all the details in the importing and exporting processes that are going",
"the library computers for a number of years just to do artsy things.",
"the tech guy at the library doesn't think that the IT guys at",
"have the opportunity to actually print something. (I'm really not sure why the",
"into the SketchUp plug-ins folder. And, the tech guy at the library doesn't",
"so that it can export STL files. But, the security on the library",
"library computers. I cannot alter them. I can use what portable versions of",
"gave the STL file to the branch manager who tried to open it",
"file into Bjoyder (The portable version on my flash drive). I could then",
"for SketchUp so that it can export STL files. But, the security on",
"something. (I'm really not sure why the libraries have SketchUp installed. But, I",
"branches. I have used SketchUp on the library computers for a number of",
"SketchUp. I would then import that dae file into Bjoyder (The portable version",
"think that the IT guys at the library will update all the copies",
"the libraries have SketchUp installed. But, I have enjoyed using it.) There is",
"I could then export it as an STL file. The process appeared to",
"of years just to do artsy things. Suddenly, I have the opportunity to",
"printer in one of the branches. I have used SketchUp on the library",
"computers will not allow me to put a file into the SketchUp plug-ins",
"tech guy at the library doesn't think that the IT guys at the",
"could be sent to the printer. But, it gave him a message about",
"the branches. I have used SketchUp on the library computers for a number",
"3D printer in one of the branches. I have used SketchUp on the",
"importing and exporting processes that are going on. Is there someone out there",
"library doesn't think that the IT guys at the library will update all",
"who tried to open it in the Makerbot software so that it could",
"a message about the file not being recognized. I am not familiar with",
"have enjoyed using it.) There is a plug-in available for SketchUp so that",
"guy at the library doesn't think that the IT guys at the library",
"at the library doesn't think that the IT guys at the library will",
"the branch manager who tried to open it in the Makerbot software so",
"file from SketchUp. I would then import that dae file into Bjoyder (The",
"then import that dae file into Bjoyder (The portable version on my flash",
"update all the copies of SketchUp at all the branches just so someone",
"recognized. I am not familiar with all the details in the importing and",
"have SketchUp installed. But, I have enjoyed using it.) There is a plug-in",
"the branches just so someone could do 3D printing. After doing some searching",
"One problem is that, I am using the library computers. I cannot alter",
"message about the file not being recognized. I am not familiar with all",
"version on my flash drive). I could then export it as an STL",
"on my flash drive). I could then export it as an STL file.",
"exporting processes that are going on. Is there someone out there that can",
"that can give me some help? One problem is that, I am using",
"can give me some help? One problem is that, I am using the",
"to put a file into the SketchUp plug-ins folder. And, the tech guy",
"the printer. But, it gave him a message about the file not being",
"that the IT guys at the library will update all the copies of",
"that, I am using the library computers. I cannot alter them. I can",
"a plug-in available for SketchUp so that it can export STL files. But,",
"processes that are going on. Is there someone out there that can give",
"could see my test object in Bjoyder. I gave the STL file to",
"the Makerbot software so that it could be sent to the printer. But,",
"the SketchUp plug-ins folder. And, the tech guy at the library doesn't think",
"doing some searching on this website, I found out that I could export",
"And, the tech guy at the library doesn't think that the IT guys",
"into Bjoyder (The portable version on my flash drive). I could then export",
"allow me to put a file into the SketchUp plug-ins folder. And, the",
"I am using the library computers. I cannot alter them. I can use",
"them. I can use what portable versions of software are out there, like",
"years just to do artsy things. Suddenly, I have the opportunity to actually",
"put a 3D printer in one of the branches. I have used SketchUp",
"library system just put a 3D printer in one of the branches. I",
"doesn't think that the IT guys at the library will update all the",
"my test object in Bjoyder. I gave the STL file to the branch",
"SketchUp plug-ins folder. And, the tech guy at the library doesn't think that",
"library computers will not allow me to put a file into the SketchUp",
"really not sure why the libraries have SketchUp installed. But, I have enjoyed",
"a COLLADA / dae file from SketchUp. I would then import that dae",
"that dae file into Bjoyder (The portable version on my flash drive). I",
"file to the branch manager who tried to open it in the Makerbot",
"out there that can give me some help? One problem is that, I",
"branch manager who tried to open it in the Makerbot software so that",
"printer. But, it gave him a message about the file not being recognized.",
"familiar with all the details in the importing and exporting processes that are",
"as an STL file. The process appeared to work. I could see my",
"so someone could do 3D printing. After doing some searching on this website,",
"that are going on. Is there someone out there that can give me",
"branches just so someone could do 3D printing. After doing some searching on",
"guys at the library will update all the copies of SketchUp at all",
"is a plug-in available for SketchUp so that it can export STL files.",
"COLLADA / dae file from SketchUp. I would then import that dae file",
"The process appeared to work. I could see my test object in Bjoyder.",
"the details in the importing and exporting processes that are going on. Is",
"things. Suddenly, I have the opportunity to actually print something. (I'm really not",
"in Bjoyder. I gave the STL file to the branch manager who tried",
"are going on. Is there someone out there that can give me some",
"STL files. But, the security on the library computers will not allow me",
"Is there someone out there that can give me some help? One problem",
"website, I found out that I could export a COLLADA / dae file",
"being recognized. I am not familiar with all the details in the importing",
"give me some help? One problem is that, I am using the library",
"to the branch manager who tried to open it in the Makerbot software",
"not allow me to put a file into the SketchUp plug-ins folder. And,",
"folder. And, the tech guy at the library doesn't think that the IT",
"all the branches just so someone could do 3D printing. After doing some",
"this website, I found out that I could export a COLLADA / dae",
"will not allow me to put a file into the SketchUp plug-ins folder.",
"file into the SketchUp plug-ins folder. And, the tech guy at the library",
"see my test object in Bjoyder. I gave the STL file to the",
"SketchUp so that it can export STL files. But, the security on the",
"STL file. The process appeared to work. I could see my test object",
"open it in the Makerbot software so that it could be sent to",
"all the copies of SketchUp at all the branches just so someone could",
"installed. But, I have enjoyed using it.) There is a plug-in available for",
"Our library system just put a 3D printer in one of the branches.",
"am using the library computers. I cannot alter them. I can use what",
"for a number of years just to do artsy things. Suddenly, I have",
"a 3D printer in one of the branches. I have used SketchUp on",
"in the importing and exporting processes that are going on. Is there someone",
"plug-in available for SketchUp so that it can export STL files. But, the",
"not sure why the libraries have SketchUp installed. But, I have enjoyed using",
"I would then import that dae file into Bjoyder (The portable version on",
"going on. Is there someone out there that can give me some help?",
"the importing and exporting processes that are going on. Is there someone out",
"put a file into the SketchUp plug-ins folder. And, the tech guy at",
"can export STL files. But, the security on the library computers will not",
"printing. After doing some searching on this website, I found out that I",
"I could export a COLLADA / dae file from SketchUp. I would then",
"tried to open it in the Makerbot software so that it could be",
"IT guys at the library will update all the copies of SketchUp at",
"3D printing. After doing some searching on this website, I found out that",
"flash drive). I could then export it as an STL file. The process",
"SketchUp on the library computers for a number of years just to do",
"/ dae file from SketchUp. I would then import that dae file into",
"on this website, I found out that I could export a COLLADA /",
"security on the library computers will not allow me to put a file",
"of SketchUp at all the branches just so someone could do 3D printing.",
"the security on the library computers will not allow me to put a",
"files. But, the security on the library computers will not allow me to",
"at the library will update all the copies of SketchUp at all the",
"an STL file. The process appeared to work. I could see my test",
"not being recognized. I am not familiar with all the details in the",
"manager who tried to open it in the Makerbot software so that it",
"someone could do 3D printing. After doing some searching on this website, I",
"one of the branches. I have used SketchUp on the library computers for",
"the IT guys at the library will update all the copies of SketchUp",
"from SketchUp. I would then import that dae file into Bjoyder (The portable",
"I could see my test object in Bjoyder. I gave the STL file",
"that I could export a COLLADA / dae file from SketchUp. I would",
"could export a COLLADA / dae file from SketchUp. I would then import",
"the STL file to the branch manager who tried to open it in",
"am not familiar with all the details in the importing and exporting processes",
"drive). I could then export it as an STL file. The process appeared",
"Makerbot software so that it could be sent to the printer. But, it",
"help? One problem is that, I am using the library computers. I cannot",
"Suddenly, I have the opportunity to actually print something. (I'm really not sure",
"(I'm really not sure why the libraries have SketchUp installed. But, I have",
"would then import that dae file into Bjoyder (The portable version on my",
"there that can give me some help? One problem is that, I am",
"number of years just to do artsy things. Suddenly, I have the opportunity",
"portable version on my flash drive). I could then export it as an",
"searching on this website, I found out that I could export a COLLADA",
"on the library computers for a number of years just to do artsy",
"the library computers will not allow me to put a file into the",
"software so that it could be sent to the printer. But, it gave",
"it can export STL files. But, the security on the library computers will",
"copies of SketchUp at all the branches just so someone could do 3D",
"so that it could be sent to the printer. But, it gave him",
"in the Makerbot software so that it could be sent to the printer.",
"sent to the printer. But, it gave him a message about the file",
"about the file not being recognized. I am not familiar with all the",
"I cannot alter them. I can use what portable versions of software are",
"the copies of SketchUp at all the branches just so someone could do",
"some searching on this website, I found out that I could export a",
"someone out there that can give me some help? One problem is that,",
"the file not being recognized. I am not familiar with all the details",
"on. Is there someone out there that can give me some help? One",
"why the libraries have SketchUp installed. But, I have enjoyed using it.) There",
"a number of years just to do artsy things. Suddenly, I have the",
"it could be sent to the printer. But, it gave him a message",
"SketchUp installed. But, I have enjoyed using it.) There is a plug-in available"
] |
[
"remove support) it often leaves an ugly while mark where the removed piece",
"connected. Sanding also tend to leave dull white scratches on the sanded surface.",
"scratches on the sanded surface. What can I do to restore the white",
"sanded surface. What can I do to restore the white areas to the",
"tend to leave dull white scratches on the sanded surface. What can I",
"PLA model (for example to remove support) it often leaves an ugly while",
"white scratches on the sanded surface. What can I do to restore the",
"leaves an ugly while mark where the removed piece was connected. Sanding also",
"(for example to remove support) it often leaves an ugly while mark where",
"also tend to leave dull white scratches on the sanded surface. What can",
"dull white scratches on the sanded surface. What can I do to restore",
"When you cut or break a PLA model (for example to remove support)",
"cut or break a PLA model (for example to remove support) it often",
"the removed piece was connected. Sanding also tend to leave dull white scratches",
"the sanded surface. What can I do to restore the white areas to",
"a PLA model (for example to remove support) it often leaves an ugly",
"What can I do to restore the white areas to the original filament",
"it often leaves an ugly while mark where the removed piece was connected.",
"can I do to restore the white areas to the original filament color?",
"often leaves an ugly while mark where the removed piece was connected. Sanding",
"you cut or break a PLA model (for example to remove support) it",
"to remove support) it often leaves an ugly while mark where the removed",
"while mark where the removed piece was connected. Sanding also tend to leave",
"was connected. Sanding also tend to leave dull white scratches on the sanded",
"on the sanded surface. What can I do to restore the white areas",
"to leave dull white scratches on the sanded surface. What can I do",
"mark where the removed piece was connected. Sanding also tend to leave dull",
"example to remove support) it often leaves an ugly while mark where the",
"leave dull white scratches on the sanded surface. What can I do to",
"ugly while mark where the removed piece was connected. Sanding also tend to",
"model (for example to remove support) it often leaves an ugly while mark",
"or break a PLA model (for example to remove support) it often leaves",
"removed piece was connected. Sanding also tend to leave dull white scratches on",
"piece was connected. Sanding also tend to leave dull white scratches on the",
"Sanding also tend to leave dull white scratches on the sanded surface. What",
"where the removed piece was connected. Sanding also tend to leave dull white",
"surface. What can I do to restore the white areas to the original",
"break a PLA model (for example to remove support) it often leaves an",
"an ugly while mark where the removed piece was connected. Sanding also tend",
"support) it often leaves an ugly while mark where the removed piece was"
] |
[
"used. My printer is a [Lulzbot Mini](https://www.lulzbot.com/store/printers/lulzbot-mini). The design illustrated below can be",
"be used. My printer is a [Lulzbot Mini](https://www.lulzbot.com/store/printers/lulzbot-mini). The design illustrated below can",
"printer is a [Lulzbot Mini](https://www.lulzbot.com/store/printers/lulzbot-mini). The design illustrated below can be found [here](https://www.tinkercad.com/things/hBE6Aj2EJMo-skyrail-marble-coster-banked-curve-beta).",
"Cura does not seem let the full print area to be used. My",
"is a [Lulzbot Mini](https://www.lulzbot.com/store/printers/lulzbot-mini). The design illustrated below can be found [here](https://www.tinkercad.com/things/hBE6Aj2EJMo-skyrail-marble-coster-banked-curve-beta). [](https://i.stack.imgur.com/pf5AP.png)",
"to be used. My printer is a [Lulzbot Mini](https://www.lulzbot.com/store/printers/lulzbot-mini). The design illustrated below",
"a [Lulzbot Mini](https://www.lulzbot.com/store/printers/lulzbot-mini). The design illustrated below can be found [here](https://www.tinkercad.com/things/hBE6Aj2EJMo-skyrail-marble-coster-banked-curve-beta). [](https://i.stack.imgur.com/pf5AP.png) [](https://i.stack.imgur.com/iqvqo.png)",
"My printer is a [Lulzbot Mini](https://www.lulzbot.com/store/printers/lulzbot-mini). The design illustrated below can be found",
"seem let the full print area to be used. My printer is a",
"not seem let the full print area to be used. My printer is",
"the full print area to be used. My printer is a [Lulzbot Mini](https://www.lulzbot.com/store/printers/lulzbot-mini).",
"area to be used. My printer is a [Lulzbot Mini](https://www.lulzbot.com/store/printers/lulzbot-mini). The design illustrated",
"let the full print area to be used. My printer is a [Lulzbot",
"does not seem let the full print area to be used. My printer",
"print area to be used. My printer is a [Lulzbot Mini](https://www.lulzbot.com/store/printers/lulzbot-mini). The design",
"full print area to be used. My printer is a [Lulzbot Mini](https://www.lulzbot.com/store/printers/lulzbot-mini). The"
] |
[
"running the bed when the thermistor isn't working, to avoid unlimited overheating). I",
"/ Bed, for First layer and Other layers (and groups of settings can",
"without it. I don't get how multiple sources of control relate to each",
"also has a menu/fill-in labelled \"Bed\", which works fine to adjust the bed",
"you pick from a manually-entered value, \"0 (off)\", and (apparently) the settings for",
"seems to be to prevent running the bed when the thermistor isn't working,",
"to each other (same with extrusion temperatures, actually): * Slic3r (1.2.9) has settings",
"use, *really* get made? I have the same question about extruder temps, speeds,",
"setting in the GUI main screen (and also tried setting \"0 (off)\" manually.",
"\"Bed temperature\" (actually, two settings, one for PLA and one for ABS --",
"-- though I doubt the software can test which filament is loaded!) *",
"which works fine to adjust the bed when nothing is printing. The menu",
"(the non-zero minimum seems to be to prevent running the bed when the",
"I want to print without it. I don't get how multiple sources of",
"GUI also has a menu/fill-in labelled \"Bed\", which works fine to adjust the",
"printing. The menu there lets you pick from a manually-entered value, \"0 (off)\",",
"with bed heat off in Slic3r; changed the PLA bed temps in the",
"when I want to print without it. I don't get how multiple sources",
"(and groups of settings can be saved). * The pronterface GUI (Printrun-Mac-10Mar2014) has",
"to print the object, the bed turned on and stayed on, maintaining 60C.",
"\"0 (off)\", and (apparently) the settings for PLA and ABS from the options",
"my MendelMax 2's heatbed *not* to heat up when I want to print",
"options panel. * Marlin's Configuration.h has settings for bed minimum and maximum temps",
"for PLA and one for ABS -- though I doubt the software can",
"for First layer and Other layers (and groups of settings can be saved).",
"and stayed on, maintaining 60C. I thought of just unplugging the heatbed, but",
"up when I want to print without it. I don't get how multiple",
"value, \"0 (off)\", and (apparently) the settings for PLA and ABS from the",
"pronterface GUI (Printrun-Mac-10Mar2014) has an \"Options\" panel where you can set \"Bed temperature\"",
"Bed, for First layer and Other layers (and groups of settings can be",
"from the options panel. * Marlin's Configuration.h has settings for bed minimum and",
"PLA bed temps in the printerface options panel to 0; and picked the",
"isn't working, to avoid unlimited overheating). I recently tried to print some PLA",
"print would never start, since it would try to heat up the bed",
"succeed. So how does the decision about which temperature setting to use, *really*",
"the model with bed heat off in Slic3r; changed the PLA bed temps",
"does the decision about which temperature setting to use, *really* get made? I",
"getting my MendelMax 2's heatbed *not* to heat up when I want to",
"temperatures, actually): * Slic3r (1.2.9) has settings under Filament Settings / Filament /",
"set \"Bed temperature\" (actually, two settings, one for PLA and one for ABS",
"(actually, two settings, one for PLA and one for ABS -- though I",
"bed and never succeed. So how does the decision about which temperature setting",
"thought of just unplugging the heatbed, but then I expect the print would",
"build plate). I sliced the model with bed heat off in Slic3r; changed",
"be to prevent running the bed when the thermistor isn't working, to avoid",
"pronterface GUI also has a menu/fill-in labelled \"Bed\", which works fine to adjust",
"actually): * Slic3r (1.2.9) has settings under Filament Settings / Filament / Bed,",
"works fine to adjust the bed when nothing is printing. The menu there",
"(Printrun-Mac-10Mar2014) has an \"Options\" panel where you can set \"Bed temperature\" (actually, two",
"the software can test which filament is loaded!) * The pronterface GUI also",
"and picked the PLA setting in the GUI main screen (and also tried",
"I don't get how multiple sources of control relate to each other (same",
"under Filament Settings / Filament / Bed, for First layer and Other layers",
"Slic3r; changed the PLA bed temps in the printerface options panel to 0;",
"the thermistor isn't working, to avoid unlimited overheating). I recently tried to print",
"can set \"Bed temperature\" (actually, two settings, one for PLA and one for",
"the bed when the thermistor isn't working, to avoid unlimited overheating). I recently",
"unlimited overheating). I recently tried to print some PLA with no bed heat",
"manually. When I started to print the object, the bed turned on and",
"one for ABS -- though I doubt the software can test which filament",
"of just unplugging the heatbed, but then I expect the print would never",
"heatbed, but then I expect the print would never start, since it would",
"can be saved). * The pronterface GUI (Printrun-Mac-10Mar2014) has an \"Options\" panel where",
"Configuration.h has settings for bed minimum and maximum temps (the non-zero minimum seems",
"recently tried to print some PLA with no bed heat (using blue tape",
"(same with extrusion temperatures, actually): * Slic3r (1.2.9) has settings under Filament Settings",
"is loaded!) * The pronterface GUI also has a menu/fill-in labelled \"Bed\", which",
"bed when the thermistor isn't working, to avoid unlimited overheating). I recently tried",
"screen (and also tried setting \"0 (off)\" manually. When I started to print",
"heatbed *not* to heat up when I want to print without it. I",
"2's heatbed *not* to heat up when I want to print without it.",
"print some PLA with no bed heat (using blue tape on the glass",
"manually-entered value, \"0 (off)\", and (apparently) the settings for PLA and ABS from",
"the print would never start, since it would try to heat up the",
"software can test which filament is loaded!) * The pronterface GUI also has",
"is printing. The menu there lets you pick from a manually-entered value, \"0",
"and (apparently) the settings for PLA and ABS from the options panel. *",
"to be to prevent running the bed when the thermistor isn't working, to",
"Other layers (and groups of settings can be saved). * The pronterface GUI",
"has settings under Filament Settings / Filament / Bed, for First layer and",
"setting to use, *really* get made? I have the same question about extruder",
"panel to 0; and picked the PLA setting in the GUI main screen",
"off in Slic3r; changed the PLA bed temps in the printerface options panel",
"the glass build plate). I sliced the model with bed heat off in",
"unplugging the heatbed, but then I expect the print would never start, since",
"question about extruder temps, speeds, accelerations, and other things, too -- whose settings",
"the printerface options panel to 0; and picked the PLA setting in the",
"how does the decision about which temperature setting to use, *really* get made?",
"relate to each other (same with extrusion temperatures, actually): * Slic3r (1.2.9) has",
"The pronterface GUI also has a menu/fill-in labelled \"Bed\", which works fine to",
"the bed and never succeed. So how does the decision about which temperature",
"one for PLA and one for ABS -- though I doubt the software",
"which temperature setting to use, *really* get made? I have the same question",
"printerface options panel to 0; and picked the PLA setting in the GUI",
"the PLA setting in the GUI main screen (and also tried setting \"0",
"about which temperature setting to use, *really* get made? I have the same",
"ABS -- though I doubt the software can test which filament is loaded!)",
"in the GUI main screen (and also tried setting \"0 (off)\" manually. When",
"on the glass build plate). I sliced the model with bed heat off",
"(1.2.9) has settings under Filament Settings / Filament / Bed, for First layer",
"maximum temps (the non-zero minimum seems to be to prevent running the bed",
"to print without it. I don't get how multiple sources of control relate",
"the object, the bed turned on and stayed on, maintaining 60C. I thought",
"each other (same with extrusion temperatures, actually): * Slic3r (1.2.9) has settings under",
"tried setting \"0 (off)\" manually. When I started to print the object, the",
"trouble getting my MendelMax 2's heatbed *not* to heat up when I want",
"So how does the decision about which temperature setting to use, *really* get",
"which filament is loaded!) * The pronterface GUI also has a menu/fill-in labelled",
"two settings, one for PLA and one for ABS -- though I doubt",
"Filament Settings / Filament / Bed, for First layer and Other layers (and",
"loaded!) * The pronterface GUI also has a menu/fill-in labelled \"Bed\", which works",
"of control relate to each other (same with extrusion temperatures, actually): * Slic3r",
"(off)\" manually. When I started to print the object, the bed turned on",
"start, since it would try to heat up the bed and never succeed.",
"bed turned on and stayed on, maintaining 60C. I thought of just unplugging",
"lets you pick from a manually-entered value, \"0 (off)\", and (apparently) the settings",
"PLA setting in the GUI main screen (and also tried setting \"0 (off)\"",
"to use, *really* get made? I have the same question about extruder temps,",
"for PLA and ABS from the options panel. * Marlin's Configuration.h has settings",
"* The pronterface GUI (Printrun-Mac-10Mar2014) has an \"Options\" panel where you can set",
"layer and Other layers (and groups of settings can be saved). * The",
"settings for PLA and ABS from the options panel. * Marlin's Configuration.h has",
"minimum and maximum temps (the non-zero minimum seems to be to prevent running",
"for bed minimum and maximum temps (the non-zero minimum seems to be to",
"fine to adjust the bed when nothing is printing. The menu there lets",
"(and also tried setting \"0 (off)\" manually. When I started to print the",
"a menu/fill-in labelled \"Bed\", which works fine to adjust the bed when nothing",
"(apparently) the settings for PLA and ABS from the options panel. * Marlin's",
"I doubt the software can test which filament is loaded!) * The pronterface",
"also tried setting \"0 (off)\" manually. When I started to print the object,",
"the GUI main screen (and also tried setting \"0 (off)\" manually. When I",
"labelled \"Bed\", which works fine to adjust the bed when nothing is printing.",
"adjust the bed when nothing is printing. The menu there lets you pick",
"and ABS from the options panel. * Marlin's Configuration.h has settings for bed",
"overheating). I recently tried to print some PLA with no bed heat (using",
"have the same question about extruder temps, speeds, accelerations, and other things, too",
"\"Bed\", which works fine to adjust the bed when nothing is printing. The",
"* Slic3r (1.2.9) has settings under Filament Settings / Filament / Bed, for",
"and one for ABS -- though I doubt the software can test which",
"the options panel. * Marlin's Configuration.h has settings for bed minimum and maximum",
"Marlin's Configuration.h has settings for bed minimum and maximum temps (the non-zero minimum",
"blue tape on the glass build plate). I sliced the model with bed",
"how multiple sources of control relate to each other (same with extrusion temperatures,",
"\"0 (off)\" manually. When I started to print the object, the bed turned",
"a manually-entered value, \"0 (off)\", and (apparently) the settings for PLA and ABS",
"get how multiple sources of control relate to each other (same with extrusion",
"the bed when nothing is printing. The menu there lets you pick from",
"it would try to heat up the bed and never succeed. So how",
"settings can be saved). * The pronterface GUI (Printrun-Mac-10Mar2014) has an \"Options\" panel",
"working, to avoid unlimited overheating). I recently tried to print some PLA with",
"print the object, the bed turned on and stayed on, maintaining 60C. I",
"want to print without it. I don't get how multiple sources of control",
"extruder temps, speeds, accelerations, and other things, too -- whose settings are really",
"I'm having trouble getting my MendelMax 2's heatbed *not* to heat up when",
"GUI main screen (and also tried setting \"0 (off)\" manually. When I started",
"be saved). * The pronterface GUI (Printrun-Mac-10Mar2014) has an \"Options\" panel where you",
"the same question about extruder temps, speeds, accelerations, and other things, too --",
"and never succeed. So how does the decision about which temperature setting to",
"there lets you pick from a manually-entered value, \"0 (off)\", and (apparently) the",
"to heat up the bed and never succeed. So how does the decision",
"for ABS -- though I doubt the software can test which filament is",
"sources of control relate to each other (same with extrusion temperatures, actually): *",
"and maximum temps (the non-zero minimum seems to be to prevent running the",
"(using blue tape on the glass build plate). I sliced the model with",
"has settings for bed minimum and maximum temps (the non-zero minimum seems to",
"*not* to heat up when I want to print without it. I don't",
"with no bed heat (using blue tape on the glass build plate). I",
"picked the PLA setting in the GUI main screen (and also tried setting",
"minimum seems to be to prevent running the bed when the thermistor isn't",
"saved). * The pronterface GUI (Printrun-Mac-10Mar2014) has an \"Options\" panel where you can",
"other (same with extrusion temperatures, actually): * Slic3r (1.2.9) has settings under Filament",
"settings for bed minimum and maximum temps (the non-zero minimum seems to be",
"0; and picked the PLA setting in the GUI main screen (and also",
"never start, since it would try to heat up the bed and never",
"having trouble getting my MendelMax 2's heatbed *not* to heat up when I",
"I recently tried to print some PLA with no bed heat (using blue",
"heat (using blue tape on the glass build plate). I sliced the model",
"I sliced the model with bed heat off in Slic3r; changed the PLA",
"of settings can be saved). * The pronterface GUI (Printrun-Mac-10Mar2014) has an \"Options\"",
"GUI (Printrun-Mac-10Mar2014) has an \"Options\" panel where you can set \"Bed temperature\" (actually,",
"glass build plate). I sliced the model with bed heat off in Slic3r;",
"60C. I thought of just unplugging the heatbed, but then I expect the",
"prevent running the bed when the thermistor isn't working, to avoid unlimited overheating).",
"* Marlin's Configuration.h has settings for bed minimum and maximum temps (the non-zero",
"I expect the print would never start, since it would try to heat",
"groups of settings can be saved). * The pronterface GUI (Printrun-Mac-10Mar2014) has an",
"on, maintaining 60C. I thought of just unplugging the heatbed, but then I",
"in Slic3r; changed the PLA bed temps in the printerface options panel to",
"about extruder temps, speeds, accelerations, and other things, too -- whose settings are",
"PLA with no bed heat (using blue tape on the glass build plate).",
"extrusion temperatures, actually): * Slic3r (1.2.9) has settings under Filament Settings / Filament",
"get made? I have the same question about extruder temps, speeds, accelerations, and",
"ABS from the options panel. * Marlin's Configuration.h has settings for bed minimum",
"never succeed. So how does the decision about which temperature setting to use,",
"same question about extruder temps, speeds, accelerations, and other things, too -- whose",
"started to print the object, the bed turned on and stayed on, maintaining",
"The menu there lets you pick from a manually-entered value, \"0 (off)\", and",
"some PLA with no bed heat (using blue tape on the glass build",
"no bed heat (using blue tape on the glass build plate). I sliced",
"settings under Filament Settings / Filament / Bed, for First layer and Other",
"temperature\" (actually, two settings, one for PLA and one for ABS -- though",
"try to heat up the bed and never succeed. So how does the",
"on and stayed on, maintaining 60C. I thought of just unplugging the heatbed,",
"non-zero minimum seems to be to prevent running the bed when the thermistor",
"The pronterface GUI (Printrun-Mac-10Mar2014) has an \"Options\" panel where you can set \"Bed",
"an \"Options\" panel where you can set \"Bed temperature\" (actually, two settings, one",
"you can set \"Bed temperature\" (actually, two settings, one for PLA and one",
"panel. * Marlin's Configuration.h has settings for bed minimum and maximum temps (the",
"the bed turned on and stayed on, maintaining 60C. I thought of just",
"the settings for PLA and ABS from the options panel. * Marlin's Configuration.h",
"I started to print the object, the bed turned on and stayed on,",
"but then I expect the print would never start, since it would try",
"temps (the non-zero minimum seems to be to prevent running the bed when",
"made? I have the same question about extruder temps, speeds, accelerations, and other",
"decision about which temperature setting to use, *really* get made? I have the",
"settings, one for PLA and one for ABS -- though I doubt the",
"multiple sources of control relate to each other (same with extrusion temperatures, actually):",
"from a manually-entered value, \"0 (off)\", and (apparently) the settings for PLA and",
"* The pronterface GUI also has a menu/fill-in labelled \"Bed\", which works fine",
"up the bed and never succeed. So how does the decision about which",
"would never start, since it would try to heat up the bed and",
"expect the print would never start, since it would try to heat up",
"can test which filament is loaded!) * The pronterface GUI also has a",
"temperature setting to use, *really* get made? I have the same question about",
"though I doubt the software can test which filament is loaded!) * The",
"avoid unlimited overheating). I recently tried to print some PLA with no bed",
"temps in the printerface options panel to 0; and picked the PLA setting",
"turned on and stayed on, maintaining 60C. I thought of just unplugging the",
"would try to heat up the bed and never succeed. So how does",
"tape on the glass build plate). I sliced the model with bed heat",
"test which filament is loaded!) * The pronterface GUI also has a menu/fill-in",
"object, the bed turned on and stayed on, maintaining 60C. I thought of",
"First layer and Other layers (and groups of settings can be saved). *",
"menu/fill-in labelled \"Bed\", which works fine to adjust the bed when nothing is",
"thermistor isn't working, to avoid unlimited overheating). I recently tried to print some",
"doubt the software can test which filament is loaded!) * The pronterface GUI",
"bed when nothing is printing. The menu there lets you pick from a",
"I have the same question about extruder temps, speeds, accelerations, and other things,",
"in the printerface options panel to 0; and picked the PLA setting in",
"just unplugging the heatbed, but then I expect the print would never start,",
"bed heat off in Slic3r; changed the PLA bed temps in the printerface",
"When I started to print the object, the bed turned on and stayed",
"bed temps in the printerface options panel to 0; and picked the PLA",
"setting \"0 (off)\" manually. When I started to print the object, the bed",
"*really* get made? I have the same question about extruder temps, speeds, accelerations,",
"since it would try to heat up the bed and never succeed. So",
"sliced the model with bed heat off in Slic3r; changed the PLA bed",
"I thought of just unplugging the heatbed, but then I expect the print",
"where you can set \"Bed temperature\" (actually, two settings, one for PLA and",
"PLA and ABS from the options panel. * Marlin's Configuration.h has settings for",
"to avoid unlimited overheating). I recently tried to print some PLA with no",
"/ Filament / Bed, for First layer and Other layers (and groups of",
"stayed on, maintaining 60C. I thought of just unplugging the heatbed, but then",
"to print some PLA with no bed heat (using blue tape on the",
"don't get how multiple sources of control relate to each other (same with",
"to 0; and picked the PLA setting in the GUI main screen (and",
"\"Options\" panel where you can set \"Bed temperature\" (actually, two settings, one for",
"menu there lets you pick from a manually-entered value, \"0 (off)\", and (apparently)",
"PLA and one for ABS -- though I doubt the software can test",
"plate). I sliced the model with bed heat off in Slic3r; changed the",
"the PLA bed temps in the printerface options panel to 0; and picked",
"with extrusion temperatures, actually): * Slic3r (1.2.9) has settings under Filament Settings /",
"control relate to each other (same with extrusion temperatures, actually): * Slic3r (1.2.9)",
"nothing is printing. The menu there lets you pick from a manually-entered value,",
"bed heat (using blue tape on the glass build plate). I sliced the",
"maintaining 60C. I thought of just unplugging the heatbed, but then I expect",
"Slic3r (1.2.9) has settings under Filament Settings / Filament / Bed, for First",
"(off)\", and (apparently) the settings for PLA and ABS from the options panel.",
"the heatbed, but then I expect the print would never start, since it",
"to adjust the bed when nothing is printing. The menu there lets you",
"panel where you can set \"Bed temperature\" (actually, two settings, one for PLA",
"then I expect the print would never start, since it would try to",
"heat up when I want to print without it. I don't get how",
"has an \"Options\" panel where you can set \"Bed temperature\" (actually, two settings,",
"pick from a manually-entered value, \"0 (off)\", and (apparently) the settings for PLA",
"the decision about which temperature setting to use, *really* get made? I have",
"it. I don't get how multiple sources of control relate to each other",
"when the thermistor isn't working, to avoid unlimited overheating). I recently tried to",
"speeds, accelerations, and other things, too -- whose settings are really in charge?",
"has a menu/fill-in labelled \"Bed\", which works fine to adjust the bed when",
"options panel to 0; and picked the PLA setting in the GUI main",
"to heat up when I want to print without it. I don't get",
"Settings / Filament / Bed, for First layer and Other layers (and groups",
"tried to print some PLA with no bed heat (using blue tape on",
"main screen (and also tried setting \"0 (off)\" manually. When I started to",
"changed the PLA bed temps in the printerface options panel to 0; and",
"filament is loaded!) * The pronterface GUI also has a menu/fill-in labelled \"Bed\",",
"print without it. I don't get how multiple sources of control relate to",
"to prevent running the bed when the thermistor isn't working, to avoid unlimited",
"heat off in Slic3r; changed the PLA bed temps in the printerface options",
"when nothing is printing. The menu there lets you pick from a manually-entered",
"heat up the bed and never succeed. So how does the decision about",
"temps, speeds, accelerations, and other things, too -- whose settings are really in",
"MendelMax 2's heatbed *not* to heat up when I want to print without",
"model with bed heat off in Slic3r; changed the PLA bed temps in",
"and Other layers (and groups of settings can be saved). * The pronterface",
"layers (and groups of settings can be saved). * The pronterface GUI (Printrun-Mac-10Mar2014)",
"Filament / Bed, for First layer and Other layers (and groups of settings",
"bed minimum and maximum temps (the non-zero minimum seems to be to prevent"
] |
[
"\"Print support structure\", is there a way to see what it will look",
"when you enable \"Print support structure\", is there a way to see what",
"Cura, when you enable \"Print support structure\", is there a way to see",
"enable \"Print support structure\", is there a way to see what it will",
"support structure\", is there a way to see what it will look like?",
"In Cura, when you enable \"Print support structure\", is there a way to",
"you enable \"Print support structure\", is there a way to see what it"
] |
[
"a higher temperature. I think that our heat sensor is not working properly.",
"have a class in the computer lab and one of our focuses is",
"not heated (using Build Tak). This has worked very well in the past.",
"I think that our heat sensor is not working properly. Does anyone know",
"when the extruder goes to lay down plastic, the filament is too hot",
"degrees Celcius. The built plate is not heated (using Build Tak). This has",
"Makerbot Replicator 2X at our school. I have a class in the computer",
"is not printing properly. We are using PLA at 210 degrees Celcius. The",
"heat sensor is not working properly. Does anyone know how we can fix",
"using PLA at 210 degrees Celcius. The built plate is not heated (using",
"curls up in a clump around the extruder. This is characteristic of when",
"class in the computer lab and one of our focuses is using the",
"of when we first tried PLA at a higher temperature. I think that",
"is too hot and curls up in a clump around the extruder. This",
"lay down plastic, the filament is too hot and curls up in a",
"at our school. I have a class in the computer lab and one",
"Tak). This has worked very well in the past. The problem is that",
"(using Build Tak). This has worked very well in the past. The problem",
"a Makerbot Replicator 2X at our school. I have a class in the",
"that our heat sensor is not working properly. Does anyone know how we",
"in the computer lab and one of our focuses is using the printer.",
"up in a clump around the extruder. This is characteristic of when we",
"past. The problem is that when the extruder goes to lay down plastic,",
"the past. The problem is that when the extruder goes to lay down",
"The built plate is not heated (using Build Tak). This has worked very",
"that when the extruder goes to lay down plastic, the filament is too",
"PLA at a higher temperature. I think that our heat sensor is not",
"school. I have a class in the computer lab and one of our",
"using the printer. Currently, it is not printing properly. We are using PLA",
"around the extruder. This is characteristic of when we first tried PLA at",
"we first tried PLA at a higher temperature. I think that our heat",
"plate is not heated (using Build Tak). This has worked very well in",
"too hot and curls up in a clump around the extruder. This is",
"This is characteristic of when we first tried PLA at a higher temperature.",
"is using the printer. Currently, it is not printing properly. We are using",
"higher temperature. I think that our heat sensor is not working properly. Does",
"2X at our school. I have a class in the computer lab and",
"we can fix this problem? Is there a way to calibrate the sensor",
"have a Makerbot Replicator 2X at our school. I have a class in",
"are using PLA at 210 degrees Celcius. The built plate is not heated",
"Build Tak). This has worked very well in the past. The problem is",
"the printer. Currently, it is not printing properly. We are using PLA at",
"one of our focuses is using the printer. Currently, it is not printing",
"and one of our focuses is using the printer. Currently, it is not",
"problem is that when the extruder goes to lay down plastic, the filament",
"Does anyone know how we can fix this problem? Is there a way",
"goes to lay down plastic, the filament is too hot and curls up",
"lab and one of our focuses is using the printer. Currently, it is",
"tried PLA at a higher temperature. I think that our heat sensor is",
"worked very well in the past. The problem is that when the extruder",
"properly. We are using PLA at 210 degrees Celcius. The built plate is",
"I have a class in the computer lab and one of our focuses",
"well in the past. The problem is that when the extruder goes to",
"Replicator 2X at our school. I have a class in the computer lab",
"there a way to calibrate the sensor is should we install a new",
"our school. I have a class in the computer lab and one of",
"filament is too hot and curls up in a clump around the extruder.",
"extruder. This is characteristic of when we first tried PLA at a higher",
"anyone know how we can fix this problem? Is there a way to",
"extruder goes to lay down plastic, the filament is too hot and curls",
"very well in the past. The problem is that when the extruder goes",
"This has worked very well in the past. The problem is that when",
"how we can fix this problem? Is there a way to calibrate the",
"to lay down plastic, the filament is too hot and curls up in",
"our focuses is using the printer. Currently, it is not printing properly. We",
"properly. Does anyone know how we can fix this problem? Is there a",
"built plate is not heated (using Build Tak). This has worked very well",
"210 degrees Celcius. The built plate is not heated (using Build Tak). This",
"computer lab and one of our focuses is using the printer. Currently, it",
"characteristic of when we first tried PLA at a higher temperature. I think",
"focuses is using the printer. Currently, it is not printing properly. We are",
"a clump around the extruder. This is characteristic of when we first tried",
"is not working properly. Does anyone know how we can fix this problem?",
"the filament is too hot and curls up in a clump around the",
"working properly. Does anyone know how we can fix this problem? Is there",
"know how we can fix this problem? Is there a way to calibrate",
"of our focuses is using the printer. Currently, it is not printing properly.",
"can fix this problem? Is there a way to calibrate the sensor is",
"printing properly. We are using PLA at 210 degrees Celcius. The built plate",
"not printing properly. We are using PLA at 210 degrees Celcius. The built",
"temperature. I think that our heat sensor is not working properly. Does anyone",
"Is there a way to calibrate the sensor is should we install a",
"printer. Currently, it is not printing properly. We are using PLA at 210",
"has worked very well in the past. The problem is that when the",
"is that when the extruder goes to lay down plastic, the filament is",
"Currently, it is not printing properly. We are using PLA at 210 degrees",
"plastic, the filament is too hot and curls up in a clump around",
"think that our heat sensor is not working properly. Does anyone know how",
"fix this problem? Is there a way to calibrate the sensor is should",
"down plastic, the filament is too hot and curls up in a clump",
"PLA at 210 degrees Celcius. The built plate is not heated (using Build",
"a class in the computer lab and one of our focuses is using",
"in the past. The problem is that when the extruder goes to lay",
"the computer lab and one of our focuses is using the printer. Currently,",
"problem? Is there a way to calibrate the sensor is should we install",
"and curls up in a clump around the extruder. This is characteristic of",
"this problem? Is there a way to calibrate the sensor is should we",
"clump around the extruder. This is characteristic of when we first tried PLA",
"is not heated (using Build Tak). This has worked very well in the",
"the extruder goes to lay down plastic, the filament is too hot and",
"at 210 degrees Celcius. The built plate is not heated (using Build Tak).",
"in a clump around the extruder. This is characteristic of when we first",
"The problem is that when the extruder goes to lay down plastic, the",
"when we first tried PLA at a higher temperature. I think that our",
"our heat sensor is not working properly. Does anyone know how we can",
"We have a Makerbot Replicator 2X at our school. I have a class",
"first tried PLA at a higher temperature. I think that our heat sensor",
"not working properly. Does anyone know how we can fix this problem? Is",
"a way to calibrate the sensor is should we install a new one?",
"Celcius. The built plate is not heated (using Build Tak). This has worked",
"at a higher temperature. I think that our heat sensor is not working",
"hot and curls up in a clump around the extruder. This is characteristic",
"sensor is not working properly. Does anyone know how we can fix this",
"is characteristic of when we first tried PLA at a higher temperature. I",
"the extruder. This is characteristic of when we first tried PLA at a",
"heated (using Build Tak). This has worked very well in the past. The",
"We are using PLA at 210 degrees Celcius. The built plate is not",
"it is not printing properly. We are using PLA at 210 degrees Celcius."
] |
[
"haven't managed to finish one! Well... this hotend has a 1.5mm hole so",
"with or without fans, haven't managed to finish one! Well... this hotend has",
"I would like to buy a new, more precise, hotend. I'm using a",
"I'm using clogged the hotend after two minutes. Now I would like to",
"(about 40 minutes), all of the others, with or without fans, haven't managed",
"using a Bowden extruder, can you suggest a good hotend? This is my",
"at all. Believe it or not, this hotend is the only one that",
"and; * my current hotend which is just a block of aluminium with",
"one! Well... this hotend has a 1.5mm hole so I guess that that's",
"which is just a block of aluminium with a plaster cold-end 100% homemade",
"no precision at all. Believe it or not, this hotend is the only",
"made by me and; * my current hotend which is just a block",
"I'm using a Bowden extruder, can you suggest a good hotend? This is",
"is the only one that has finished a whole print (about 40 minutes),",
"me and cut using a water cutting machine) but I have always had",
"cut using a water cutting machine) but I have always had problems with",
"machine) but I have always had problems with the hotend clogging. I have",
"extruder, can you suggest a good hotend? This is my printer: [](https://s10.postimg.org/mhk71hq0p/IMG_20160302_204645713.jpg) [](https://s23.postimg.org/c7u1n63nf/IMG_20160302_204636873.jpg)",
"with all of the others was that the 1.75mm PLA that I'm using",
"that has finished a whole print (about 40 minutes), all of the others,",
"metal made by me and; * my current hotend which is just a",
"Bowden extruder, can you suggest a good hotend? This is my printer: [](https://s10.postimg.org/mhk71hq0p/IMG_20160302_204645713.jpg)",
"current hotend which is just a block of aluminium with a plaster cold-end",
"is just a block of aluminium with a plaster cold-end 100% homemade with",
"just a block of aluminium with a plaster cold-end 100% homemade with no",
"(custom design, made by me and cut using a water cutting machine) but",
"have always had problems with the hotend clogging. I have had four hotends:",
"with no precision at all. Believe it or not, this hotend is the",
"I'm building my own 3D printer (custom design, made by me and cut",
"water cutting machine) but I have always had problems with the hotend clogging.",
"or not, this hotend is the only one that has finished a whole",
"would like to buy a new, more precise, hotend. I'm using a Bowden",
"a J-Head; * a full metal; * a full metal made by me",
"I have always had problems with the hotend clogging. I have had four",
"this hotend is the only one that has finished a whole print (about",
"finished a whole print (about 40 minutes), all of the others, with or",
"more precise, hotend. I'm using a Bowden extruder, can you suggest a good",
"without fans, haven't managed to finish one! Well... this hotend has a 1.5mm",
"have had four hotends: * a J-Head; * a full metal; * a",
"aluminium with a plaster cold-end 100% homemade with no precision at all. Believe",
"with a plaster cold-end 100% homemade with no precision at all. Believe it",
"to finish one! Well... this hotend has a 1.5mm hole so I guess",
"but I have always had problems with the hotend clogging. I have had",
"whole print (about 40 minutes), all of the others, with or without fans,",
"hotend. I'm using a Bowden extruder, can you suggest a good hotend? This",
"building my own 3D printer (custom design, made by me and cut using",
"it can print. The problem with all of the others was that the",
"a full metal; * a full metal made by me and; * my",
"using a water cutting machine) but I have always had problems with the",
"a water cutting machine) but I have always had problems with the hotend",
"had problems with the hotend clogging. I have had four hotends: * a",
"buy a new, more precise, hotend. I'm using a Bowden extruder, can you",
"Believe it or not, this hotend is the only one that has finished",
"the others, with or without fans, haven't managed to finish one! Well... this",
"cutting machine) but I have always had problems with the hotend clogging. I",
"a plaster cold-end 100% homemade with no precision at all. Believe it or",
"this hotend has a 1.5mm hole so I guess that that's why it",
"full metal; * a full metal made by me and; * my current",
"plaster cold-end 100% homemade with no precision at all. Believe it or not,",
"so I guess that that's why it can print. The problem with all",
"block of aluminium with a plaster cold-end 100% homemade with no precision at",
"of the others, with or without fans, haven't managed to finish one! Well...",
"1.5mm hole so I guess that that's why it can print. The problem",
"others was that the 1.75mm PLA that I'm using clogged the hotend after",
"after two minutes. Now I would like to buy a new, more precise,",
"print. The problem with all of the others was that the 1.75mm PLA",
"* my current hotend which is just a block of aluminium with a",
"hotend is the only one that has finished a whole print (about 40",
"print (about 40 minutes), all of the others, with or without fans, haven't",
"by me and; * my current hotend which is just a block of",
"the 1.75mm PLA that I'm using clogged the hotend after two minutes. Now",
"design, made by me and cut using a water cutting machine) but I",
"and cut using a water cutting machine) but I have always had problems",
"the only one that has finished a whole print (about 40 minutes), all",
"1.75mm PLA that I'm using clogged the hotend after two minutes. Now I",
"can print. The problem with all of the others was that the 1.75mm",
"J-Head; * a full metal; * a full metal made by me and;",
"why it can print. The problem with all of the others was that",
"new, more precise, hotend. I'm using a Bowden extruder, can you suggest a",
"metal; * a full metal made by me and; * my current hotend",
"a full metal made by me and; * my current hotend which is",
"minutes), all of the others, with or without fans, haven't managed to finish",
"Now I would like to buy a new, more precise, hotend. I'm using",
"precise, hotend. I'm using a Bowden extruder, can you suggest a good hotend?",
"problems with the hotend clogging. I have had four hotends: * a J-Head;",
"a new, more precise, hotend. I'm using a Bowden extruder, can you suggest",
"one that has finished a whole print (about 40 minutes), all of the",
"40 minutes), all of the others, with or without fans, haven't managed to",
"hotend which is just a block of aluminium with a plaster cold-end 100%",
"that the 1.75mm PLA that I'm using clogged the hotend after two minutes.",
"my own 3D printer (custom design, made by me and cut using a",
"printer (custom design, made by me and cut using a water cutting machine)",
"precision at all. Believe it or not, this hotend is the only one",
"a Bowden extruder, can you suggest a good hotend? This is my printer:",
"problem with all of the others was that the 1.75mm PLA that I'm",
"only one that has finished a whole print (about 40 minutes), all of",
"always had problems with the hotend clogging. I have had four hotends: *",
"guess that that's why it can print. The problem with all of the",
"all of the others was that the 1.75mm PLA that I'm using clogged",
"* a J-Head; * a full metal; * a full metal made by",
"made by me and cut using a water cutting machine) but I have",
"four hotends: * a J-Head; * a full metal; * a full metal",
"my current hotend which is just a block of aluminium with a plaster",
"hotend has a 1.5mm hole so I guess that that's why it can",
"managed to finish one! Well... this hotend has a 1.5mm hole so I",
"I have had four hotends: * a J-Head; * a full metal; *",
"a 1.5mm hole so I guess that that's why it can print. The",
"that that's why it can print. The problem with all of the others",
"* a full metal made by me and; * my current hotend which",
"The problem with all of the others was that the 1.75mm PLA that",
"minutes. Now I would like to buy a new, more precise, hotend. I'm",
"clogging. I have had four hotends: * a J-Head; * a full metal;",
"all. Believe it or not, this hotend is the only one that has",
"finish one! Well... this hotend has a 1.5mm hole so I guess that",
"that I'm using clogged the hotend after two minutes. Now I would like",
"the hotend after two minutes. Now I would like to buy a new,",
"the others was that the 1.75mm PLA that I'm using clogged the hotend",
"homemade with no precision at all. Believe it or not, this hotend is",
"has a 1.5mm hole so I guess that that's why it can print.",
"by me and cut using a water cutting machine) but I have always",
"has finished a whole print (about 40 minutes), all of the others, with",
"full metal made by me and; * my current hotend which is just",
"fans, haven't managed to finish one! Well... this hotend has a 1.5mm hole",
"of the others was that the 1.75mm PLA that I'm using clogged the",
"me and; * my current hotend which is just a block of aluminium",
"that's why it can print. The problem with all of the others was",
"or without fans, haven't managed to finish one! Well... this hotend has a",
"had four hotends: * a J-Head; * a full metal; * a full",
"with the hotend clogging. I have had four hotends: * a J-Head; *",
"* a full metal; * a full metal made by me and; *",
"it or not, this hotend is the only one that has finished a",
"clogged the hotend after two minutes. Now I would like to buy a",
"others, with or without fans, haven't managed to finish one! Well... this hotend",
"3D printer (custom design, made by me and cut using a water cutting",
"a whole print (about 40 minutes), all of the others, with or without",
"all of the others, with or without fans, haven't managed to finish one!",
"100% homemade with no precision at all. Believe it or not, this hotend",
"own 3D printer (custom design, made by me and cut using a water",
"to buy a new, more precise, hotend. I'm using a Bowden extruder, can",
"the hotend clogging. I have had four hotends: * a J-Head; * a",
"I guess that that's why it can print. The problem with all of",
"hotend clogging. I have had four hotends: * a J-Head; * a full",
"hotends: * a J-Head; * a full metal; * a full metal made",
"like to buy a new, more precise, hotend. I'm using a Bowden extruder,",
"not, this hotend is the only one that has finished a whole print",
"hole so I guess that that's why it can print. The problem with",
"was that the 1.75mm PLA that I'm using clogged the hotend after two",
"cold-end 100% homemade with no precision at all. Believe it or not, this",
"hotend after two minutes. Now I would like to buy a new, more",
"using clogged the hotend after two minutes. Now I would like to buy",
"PLA that I'm using clogged the hotend after two minutes. Now I would",
"Well... this hotend has a 1.5mm hole so I guess that that's why",
"of aluminium with a plaster cold-end 100% homemade with no precision at all.",
"two minutes. Now I would like to buy a new, more precise, hotend.",
"a block of aluminium with a plaster cold-end 100% homemade with no precision"
] |
[
"that a lower powered laser would have to travel slower but going too",
"some lasers attached to the RepRap platform for cutting but most seem to",
"merely etching. If I were wanting to build a platform for cutting wood,",
"paper, balsa wood, or merely etching. If I were wanting to build a",
"would I need for that? I assume that a lower powered laser would",
"too slow would add the possibility of catching the wood on fire (not",
"build a platform for cutting wood, similar to the wood framed or boxed",
"to build a platform for cutting wood, similar to the wood framed or",
"going too slow would add the possibility of catching the wood on fire",
"framed or boxed 3D printers on the market, what power laser would I",
"the market, what power laser would I need for that? I assume that",
"wood, or merely etching. If I were wanting to build a platform for",
"or merely etching. If I were wanting to build a platform for cutting",
"boxed 3D printers on the market, what power laser would I need for",
"on the market, what power laser would I need for that? I assume",
"attached to the RepRap platform for cutting but most seem to be cutting",
"I need for that? I assume that a lower powered laser would have",
"for that? I assume that a lower powered laser would have to travel",
"to the wood framed or boxed 3D printers on the market, what power",
"cutting paper, balsa wood, or merely etching. If I were wanting to build",
"seen some lasers attached to the RepRap platform for cutting but most seem",
"printers on the market, what power laser would I need for that? I",
"a lower powered laser would have to travel slower but going too slow",
"lower powered laser would have to travel slower but going too slow would",
"a platform for cutting wood, similar to the wood framed or boxed 3D",
"would have to travel slower but going too slow would add the possibility",
"RepRap platform for cutting but most seem to be cutting paper, balsa wood,",
"travel slower but going too slow would add the possibility of catching the",
"3D printers on the market, what power laser would I need for that?",
"but going too slow would add the possibility of catching the wood on",
"to be cutting paper, balsa wood, or merely etching. If I were wanting",
"wood framed or boxed 3D printers on the market, what power laser would",
"to travel slower but going too slow would add the possibility of catching",
"market, what power laser would I need for that? I assume that a",
"that? I assume that a lower powered laser would have to travel slower",
"platform for cutting but most seem to be cutting paper, balsa wood, or",
"to the RepRap platform for cutting but most seem to be cutting paper,",
"the RepRap platform for cutting but most seem to be cutting paper, balsa",
"most seem to be cutting paper, balsa wood, or merely etching. If I",
"for cutting wood, similar to the wood framed or boxed 3D printers on",
"balsa wood, or merely etching. If I were wanting to build a platform",
"If I were wanting to build a platform for cutting wood, similar to",
"were wanting to build a platform for cutting wood, similar to the wood",
"platform for cutting wood, similar to the wood framed or boxed 3D printers",
"cutting wood, similar to the wood framed or boxed 3D printers on the",
"wood, similar to the wood framed or boxed 3D printers on the market,",
"the wood framed or boxed 3D printers on the market, what power laser",
"etching. If I were wanting to build a platform for cutting wood, similar",
"need for that? I assume that a lower powered laser would have to",
"have to travel slower but going too slow would add the possibility of",
"slow would add the possibility of catching the wood on fire (not good).",
"have seen some lasers attached to the RepRap platform for cutting but most",
"I were wanting to build a platform for cutting wood, similar to the",
"powered laser would have to travel slower but going too slow would add",
"assume that a lower powered laser would have to travel slower but going",
"power laser would I need for that? I assume that a lower powered",
"lasers attached to the RepRap platform for cutting but most seem to be",
"laser would I need for that? I assume that a lower powered laser",
"I assume that a lower powered laser would have to travel slower but",
"for cutting but most seem to be cutting paper, balsa wood, or merely",
"I have seen some lasers attached to the RepRap platform for cutting but",
"cutting but most seem to be cutting paper, balsa wood, or merely etching.",
"but most seem to be cutting paper, balsa wood, or merely etching. If",
"seem to be cutting paper, balsa wood, or merely etching. If I were",
"be cutting paper, balsa wood, or merely etching. If I were wanting to",
"or boxed 3D printers on the market, what power laser would I need",
"wanting to build a platform for cutting wood, similar to the wood framed",
"slower but going too slow would add the possibility of catching the wood",
"similar to the wood framed or boxed 3D printers on the market, what",
"laser would have to travel slower but going too slow would add the",
"what power laser would I need for that? I assume that a lower"
] |
[
"slowing down the print head help? Does increasing/decreasing the extrusion diameter, or layer",
"Does lowing the temperature help? Raising it? Does speeding up or slowing down",
"without adding support material. What modifications can I make to improve how steep",
"overhang my printer can print before it starts having problems? The obvious first",
"PLA or ABS, without adding support material. What modifications can I make to",
"answer is to add a cooling fan, increasing the airflow over the freshly-extruded",
"The obvious first answer is to add a cooling fan, increasing the airflow",
"What other things can improve it? Does lowing the temperature help? Raising it?",
"printer and PLA or ABS, without adding support material. What modifications can I",
"to improve how steep an overhang my printer can print before it starts",
"obvious first answer is to add a cooling fan, increasing the airflow over",
"the airflow over the freshly-extruded material ensuring it solidifies. What other things can",
"cooling fan, increasing the airflow over the freshly-extruded material ensuring it solidifies. What",
"down the print head help? Does increasing/decreasing the extrusion diameter, or layer height",
"an FDM printer and PLA or ABS, without adding support material. What modifications",
"What modifications can I make to improve how steep an overhang my printer",
"steep an overhang my printer can print before it starts having problems? The",
"before it starts having problems? The obvious first answer is to add a",
"help? Raising it? Does speeding up or slowing down the print head help?",
"solidifies. What other things can improve it? Does lowing the temperature help? Raising",
"up or slowing down the print head help? Does increasing/decreasing the extrusion diameter,",
"lowing the temperature help? Raising it? Does speeding up or slowing down the",
"can print before it starts having problems? The obvious first answer is to",
"a cooling fan, increasing the airflow over the freshly-extruded material ensuring it solidifies.",
"having problems? The obvious first answer is to add a cooling fan, increasing",
"temperature help? Raising it? Does speeding up or slowing down the print head",
"my printer can print before it starts having problems? The obvious first answer",
"print before it starts having problems? The obvious first answer is to add",
"starts having problems? The obvious first answer is to add a cooling fan,",
"airflow over the freshly-extruded material ensuring it solidifies. What other things can improve",
"freshly-extruded material ensuring it solidifies. What other things can improve it? Does lowing",
"it starts having problems? The obvious first answer is to add a cooling",
"things can improve it? Does lowing the temperature help? Raising it? Does speeding",
"speeding up or slowing down the print head help? Does increasing/decreasing the extrusion",
"ABS, without adding support material. What modifications can I make to improve how",
"it? Does lowing the temperature help? Raising it? Does speeding up or slowing",
"it? Does speeding up or slowing down the print head help? Does increasing/decreasing",
"Using an FDM printer and PLA or ABS, without adding support material. What",
"problems? The obvious first answer is to add a cooling fan, increasing the",
"improve it? Does lowing the temperature help? Raising it? Does speeding up or",
"improve how steep an overhang my printer can print before it starts having",
"can I make to improve how steep an overhang my printer can print",
"how steep an overhang my printer can print before it starts having problems?",
"is to add a cooling fan, increasing the airflow over the freshly-extruded material",
"can improve it? Does lowing the temperature help? Raising it? Does speeding up",
"I make to improve how steep an overhang my printer can print before",
"material ensuring it solidifies. What other things can improve it? Does lowing the",
"Does speeding up or slowing down the print head help? Does increasing/decreasing the",
"FDM printer and PLA or ABS, without adding support material. What modifications can",
"it solidifies. What other things can improve it? Does lowing the temperature help?",
"printer can print before it starts having problems? The obvious first answer is",
"or ABS, without adding support material. What modifications can I make to improve",
"Raising it? Does speeding up or slowing down the print head help? Does",
"an overhang my printer can print before it starts having problems? The obvious",
"other things can improve it? Does lowing the temperature help? Raising it? Does",
"modifications can I make to improve how steep an overhang my printer can",
"over the freshly-extruded material ensuring it solidifies. What other things can improve it?",
"adding support material. What modifications can I make to improve how steep an",
"material. What modifications can I make to improve how steep an overhang my",
"or slowing down the print head help? Does increasing/decreasing the extrusion diameter, or",
"and PLA or ABS, without adding support material. What modifications can I make",
"the freshly-extruded material ensuring it solidifies. What other things can improve it? Does",
"the temperature help? Raising it? Does speeding up or slowing down the print",
"fan, increasing the airflow over the freshly-extruded material ensuring it solidifies. What other",
"first answer is to add a cooling fan, increasing the airflow over the",
"add a cooling fan, increasing the airflow over the freshly-extruded material ensuring it",
"ensuring it solidifies. What other things can improve it? Does lowing the temperature",
"make to improve how steep an overhang my printer can print before it",
"to add a cooling fan, increasing the airflow over the freshly-extruded material ensuring",
"increasing the airflow over the freshly-extruded material ensuring it solidifies. What other things",
"support material. What modifications can I make to improve how steep an overhang",
"the print head help? Does increasing/decreasing the extrusion diameter, or layer height help?"
] |
[
"Maybe you have some links for this kind of stainless-steel tips? Or some",
"cannot find any tips to buy separately. Maybe you have some links for",
"a stainless steel tip for it to fix it inside hotend with a",
"thermistor in a more reliable way (now it is just thermistor plugged in",
"approach as used for the heating cartridge). I have thermistors, but I cannot",
":D). I want to have a stainless steel tip for it to fix",
"any tips to buy separately. Maybe you have some links for this kind",
"for the heating cartridge). I have thermistors, but I cannot find any tips",
"heating cartridge). I have thermistors, but I cannot find any tips to buy",
"but I cannot find any tips to buy separately. Maybe you have some",
"to buy separately. Maybe you have some links for this kind of stainless-steel",
"for it to fix it inside hotend with a screw (The same approach",
"buy separately. Maybe you have some links for this kind of stainless-steel tips?",
"to have a stainless steel tip for it to fix it inside hotend",
"this kind of stainless-steel tips? Or some keywords I can use to search",
"as used for the heating cartridge). I have thermistors, but I cannot find",
"tips to buy separately. Maybe you have some links for this kind of",
"a more reliable way (now it is just thermistor plugged in the hotend",
"(now it is just thermistor plugged in the hotend :D). I want to",
"you have some links for this kind of stainless-steel tips? Or some keywords",
"is just thermistor plugged in the hotend :D). I want to have a",
"steel tip for it to fix it inside hotend with a screw (The",
"inside hotend with a screw (The same approach as used for the heating",
"I cannot find any tips to buy separately. Maybe you have some links",
"I would like to secure my hotend thermistor in a more reliable way",
"reliable way (now it is just thermistor plugged in the hotend :D). I",
"hotend thermistor in a more reliable way (now it is just thermistor plugged",
"stainless steel tip for it to fix it inside hotend with a screw",
"like to secure my hotend thermistor in a more reliable way (now it",
"to fix it inside hotend with a screw (The same approach as used",
"(The same approach as used for the heating cartridge). I have thermistors, but",
"have some links for this kind of stainless-steel tips? Or some keywords I",
"links for this kind of stainless-steel tips? Or some keywords I can use",
"it is just thermistor plugged in the hotend :D). I want to have",
"tip for it to fix it inside hotend with a screw (The same",
"hotend with a screw (The same approach as used for the heating cartridge).",
"plugged in the hotend :D). I want to have a stainless steel tip",
"would like to secure my hotend thermistor in a more reliable way (now",
"some links for this kind of stainless-steel tips? Or some keywords I can",
"screw (The same approach as used for the heating cartridge). I have thermistors,",
"way (now it is just thermistor plugged in the hotend :D). I want",
"it to fix it inside hotend with a screw (The same approach as",
"the hotend :D). I want to have a stainless steel tip for it",
"a screw (The same approach as used for the heating cartridge). I have",
"for this kind of stainless-steel tips? Or some keywords I can use to",
"secure my hotend thermistor in a more reliable way (now it is just",
"to secure my hotend thermistor in a more reliable way (now it is",
"just thermistor plugged in the hotend :D). I want to have a stainless",
"in the hotend :D). I want to have a stainless steel tip for",
"fix it inside hotend with a screw (The same approach as used for",
"separately. Maybe you have some links for this kind of stainless-steel tips? Or",
"want to have a stainless steel tip for it to fix it inside",
"same approach as used for the heating cartridge). I have thermistors, but I",
"the heating cartridge). I have thermistors, but I cannot find any tips to",
"I want to have a stainless steel tip for it to fix it",
"it inside hotend with a screw (The same approach as used for the",
"cartridge). I have thermistors, but I cannot find any tips to buy separately.",
"I have thermistors, but I cannot find any tips to buy separately. Maybe",
"thermistor plugged in the hotend :D). I want to have a stainless steel",
"in a more reliable way (now it is just thermistor plugged in the",
"used for the heating cartridge). I have thermistors, but I cannot find any",
"have a stainless steel tip for it to fix it inside hotend with",
"my hotend thermistor in a more reliable way (now it is just thermistor",
"find any tips to buy separately. Maybe you have some links for this",
"thermistors, but I cannot find any tips to buy separately. Maybe you have",
"with a screw (The same approach as used for the heating cartridge). I",
"more reliable way (now it is just thermistor plugged in the hotend :D).",
"kind of stainless-steel tips? Or some keywords I can use to search them?",
"have thermistors, but I cannot find any tips to buy separately. Maybe you",
"hotend :D). I want to have a stainless steel tip for it to"
] |
[
"picture). I have already tried the obvious, which is removing material from the",
"the 3D printing. Thanks for your patience :) EDIT: Lubrication: I plan to",
"to check how they move. [Click here for the SolidWorks parts and assembly",
"semicircle and not inside its belly (you can see it in the picture).",
"first ever 3D print and I wanted to know how accurate it would",
"inside its belly (you can see it in the picture). I have already",
"patience :) EDIT: Lubrication: I plan to use grease to lubricate the sliding",
"files\") Initially when I 3d printed them by splitting them in half, the",
"them. I plan to use ABS for the 3D printing. Thanks for your",
"3d printed them by splitting them in half, the outer tube did not",
"that I need to prototype, I have a coaxial, rotational joint between 2",
"it in the picture). I have already tried the obvious, which is removing",
"too warped for any success. The parts were printed upwards from the bottom,",
"it would be). I then used Dremel and filing tools to file away",
"alternative method to get this complicated joint working? I need to 3D print",
"trying to close it around is 3-4 mm which doesn't suggest 3D printing",
"to another coaxial rotational joint between 2 cylinders by a hinge. I have",
"the picture). I have already tried the obvious, which is removing material from",
"enough in cross section. It meets the inner tube at the the two",
"assembly files\") Initially when I 3d printed them by splitting them in half,",
"lubricate the sliding surfaces. Clearances: I printed them without clearances initially (this is",
"the edges of the outer shell while trying to close it around is",
"use ABS for the 3D printing. Thanks for your patience :) EDIT: Lubrication:",
"circular enough in cross section. It meets the inner tube at the the",
"two ends of the semicircle and not inside its belly (you can see",
"assembly where you can use your mouse cursor to check how they move.",
"between 2 cylinders connected to another coaxial rotational joint between 2 cylinders by",
"a hinge. I have attached the individual part files as well as their",
"the SolidWorks parts and assembly files](https://drive.google.com/folderview?id=0B8GACx5kXowlcEwxOWI4REV6OFk&usp=sharing \"Click here for the SolidWorks parts and",
"for the 3D printing. Thanks for your patience :) EDIT: Lubrication: I plan",
"tried the obvious, which is removing material from the surfaces wherever the parts",
"which is removing material from the surfaces wherever the parts touch. The model",
"be too warped for any success. The parts were printed upwards from the",
"the parts touch. The model seems to be too warped for any success.",
"Initially when I 3d printed them by splitting them in half, the outer",
"cross section. It meets the inner tube at the the two ends of",
"would be). I then used Dremel and filing tools to file away about",
"between the edges of the outer shell while trying to close it around",
"the inner tube sufficiently. [](https://i.stack.imgur.com/OjlVJ.jpg) Could you tell me an",
"tube did not close, even after filing the inner tube sufficiently. [](https://i.stack.imgur.com/OjlVJ.jpg)",
"design that I need to prototype, I have a coaxial, rotational joint between",
"have been enough for mating the parts. The gap between the edges of",
"in the picture). I have already tried the obvious, which is removing material",
"another coaxial rotational joint between 2 cylinders by a hinge. I have attached",
"image description here](https://i.stack.imgur.com/OjlVJ.jpg)](https://i.stack.imgur.com/OjlVJ.jpg) Could you tell me an alternative method to get this",
"in cross section. It meets the inner tube at the the two ends",
"where you can use your mouse cursor to check how they move. [Click",
"method to get this complicated joint working? I need to 3D print them.",
"the inner tube at the the two ends of the semicircle and not",
"seems to be too warped for any success. The parts were printed upwards",
"for the SolidWorks parts and assembly files](https://drive.google.com/folderview?id=0B8GACx5kXowlcEwxOWI4REV6OFk&usp=sharing \"Click here for the SolidWorks parts",
"mating the parts. The gap between the edges of the outer shell while",
"It should have been enough for mating the parts. The gap between the",
"files](https://drive.google.com/folderview?id=0B8GACx5kXowlcEwxOWI4REV6OFk&usp=sharing \"Click here for the SolidWorks parts and assembly files\") Initially when I",
"half, the outer tube did not close, even after filing the inner tube",
"removing material from the surfaces wherever the parts touch. The model seems to",
"be). I then used Dremel and filing tools to file away about 0.5",
"Dremel and filing tools to file away about 0.5 mm of both the",
"at the the two ends of the semicircle and not inside its belly",
"2 cylinders by a hinge. I have attached the individual part files as",
"grease to lubricate the sliding surfaces. Clearances: I printed them without clearances initially",
"from the surfaces wherever the parts touch. The model seems to be too",
"away about 0.5 mm of both the surfaces. It should have been enough",
"while trying to close it around is 3-4 mm which doesn't suggest 3D",
"joint between 2 cylinders connected to another coaxial rotational joint between 2 cylinders",
"for the SolidWorks parts and assembly files\") Initially when I 3d printed them",
"upwards from the bottom, so it is not the warping due to gravity.",
"that the outer tube isn't circular enough in cross section. It meets the",
"both the surfaces. It should have been enough for mating the parts. The",
"wherever the parts touch. The model seems to be too warped for any",
"for any success. The parts were printed upwards from the bottom, so it",
"gap between the edges of the outer shell while trying to close it",
"is removing material from the surfaces wherever the parts touch. The model seems",
"parts. The gap between the edges of the outer shell while trying to",
"ever 3D print and I wanted to know how accurate it would be).",
"inaccuracy. I suspect that the outer tube isn't circular enough in cross section.",
"should have been enough for mating the parts. The gap between the edges",
"sliding surfaces. Clearances: I printed them without clearances initially (this is my first",
"you can use your mouse cursor to check how they move. [Click here",
"[Click here for the SolidWorks parts and assembly files](https://drive.google.com/folderview?id=0B8GACx5kXowlcEwxOWI4REV6OFk&usp=sharing \"Click here for the",
"The gap between the edges of the outer shell while trying to close",
"3-4 mm which doesn't suggest 3D printing inaccuracy. I suspect that the outer",
"2 cylinders connected to another coaxial rotational joint between 2 cylinders by a",
"parts and assembly files\") Initially when I 3d printed them by splitting them",
"outer shell while trying to close it around is 3-4 mm which doesn't",
"close it around is 3-4 mm which doesn't suggest 3D printing inaccuracy. I",
"attached the individual part files as well as their assembly where you can",
"parts touch. The model seems to be too warped for any success. The",
"the two ends of the semicircle and not inside its belly (you can",
"close, even after filing the inner tube sufficiently. [](https://i.stack.imgur.com/OjlVJ.jpg) Could",
"Lubrication: I plan to use grease to lubricate the sliding surfaces. Clearances: I",
"a coaxial, rotational joint between 2 cylinders connected to another coaxial rotational joint",
"as their assembly where you can use your mouse cursor to check how",
"printed them by splitting them in half, the outer tube did not close,",
"I plan to use grease to lubricate the sliding surfaces. Clearances: I printed",
"the obvious, which is removing material from the surfaces wherever the parts touch.",
"in half, the outer tube did not close, even after filing the inner",
"even after filing the inner tube sufficiently. [](https://i.stack.imgur.com/OjlVJ.jpg) Could you",
"to file away about 0.5 mm of both the surfaces. It should have",
"this complicated joint working? I need to 3D print them. I plan to",
"can see it in the picture). I have already tried the obvious, which",
"The model seems to be too warped for any success. The parts were",
"isn't circular enough in cross section. It meets the inner tube at the",
"for your patience :) EDIT: Lubrication: I plan to use grease to lubricate",
"I wanted to know how accurate it would be). I then used Dremel",
"them in half, the outer tube did not close, even after filing the",
"your patience :) EDIT: Lubrication: I plan to use grease to lubricate the",
"the semicircle and not inside its belly (you can see it in the",
"rotational joint between 2 cylinders by a hinge. I have attached the individual",
"move. [Click here for the SolidWorks parts and assembly files](https://drive.google.com/folderview?id=0B8GACx5kXowlcEwxOWI4REV6OFk&usp=sharing \"Click here for",
"check how they move. [Click here for the SolidWorks parts and assembly files](https://drive.google.com/folderview?id=0B8GACx5kXowlcEwxOWI4REV6OFk&usp=sharing",
"SolidWorks parts and assembly files](https://drive.google.com/folderview?id=0B8GACx5kXowlcEwxOWI4REV6OFk&usp=sharing \"Click here for the SolidWorks parts and assembly",
"them by splitting them in half, the outer tube did not close, even",
"when I 3d printed them by splitting them in half, the outer tube",
"touch. The model seems to be too warped for any success. The parts",
"is my first ever 3D print and I wanted to know how accurate",
"3D print them. I plan to use ABS for the 3D printing. Thanks",
"by a hinge. I have attached the individual part files as well as",
"I printed them without clearances initially (this is my first ever 3D print",
"you tell me an alternative method to get this complicated joint working? I",
"printing. Thanks for your patience :) EDIT: Lubrication: I plan to use grease",
"and I wanted to know how accurate it would be). I then used",
"tube sufficiently. [](https://i.stack.imgur.com/OjlVJ.jpg) Could you tell me an alternative method",
"plan to use grease to lubricate the sliding surfaces. Clearances: I printed them",
"individual part files as well as their assembly where you can use your",
"use your mouse cursor to check how they move. [Click here for the",
"part files as well as their assembly where you can use your mouse",
"how accurate it would be). I then used Dremel and filing tools to",
"tube at the the two ends of the semicircle and not inside its",
"(you can see it in the picture). I have already tried the obvious,",
"parts were printed upwards from the bottom, so it is not the warping",
"surfaces. It should have been enough for mating the parts. The gap between",
"joint between 2 cylinders by a hinge. I have attached the individual part",
"Clearances: I printed them without clearances initially (this is my first ever 3D",
"ABS for the 3D printing. Thanks for your patience :) EDIT: Lubrication: I",
"the SolidWorks parts and assembly files\") Initially when I 3d printed them by",
"filing the inner tube sufficiently. [](https://i.stack.imgur.com/OjlVJ.jpg) Could you tell me",
"The parts were printed upwards from the bottom, so it is not the",
"the individual part files as well as their assembly where you can use",
"a design that I need to prototype, I have a coaxial, rotational joint",
"the sliding surfaces. Clearances: I printed them without clearances initially (this is my",
"connected to another coaxial rotational joint between 2 cylinders by a hinge. I",
"I have attached the individual part files as well as their assembly where",
"the surfaces wherever the parts touch. The model seems to be too warped",
"assembly files](https://drive.google.com/folderview?id=0B8GACx5kXowlcEwxOWI4REV6OFk&usp=sharing \"Click here for the SolidWorks parts and assembly files\") Initially when",
"inner tube sufficiently. [](https://i.stack.imgur.com/OjlVJ.jpg) Could you tell me an alternative",
":) EDIT: Lubrication: I plan to use grease to lubricate the sliding surfaces.",
"filing tools to file away about 0.5 mm of both the surfaces. It",
"them without clearances initially (this is my first ever 3D print and I",
"coaxial, rotational joint between 2 cylinders connected to another coaxial rotational joint between",
"to get this complicated joint working? I need to 3D print them. I",
"see it in the picture). I have already tried the obvious, which is",
"between 2 cylinders by a hinge. I have attached the individual part files",
"Could you tell me an alternative method to get this complicated joint working?",
"prototype, I have a coaxial, rotational joint between 2 cylinders connected to another",
"of the semicircle and not inside its belly (you can see it in",
"file away about 0.5 mm of both the surfaces. It should have been",
"joint working? I need to 3D print them. I plan to use ABS",
"[](https://i.stack.imgur.com/OjlVJ.jpg) Could you tell me an alternative method to get",
"then used Dremel and filing tools to file away about 0.5 mm of",
"parts and assembly files](https://drive.google.com/folderview?id=0B8GACx5kXowlcEwxOWI4REV6OFk&usp=sharing \"Click here for the SolidWorks parts and assembly files\")",
"need to 3D print them. I plan to use ABS for the 3D",
"here](https://i.stack.imgur.com/OjlVJ.jpg)](https://i.stack.imgur.com/OjlVJ.jpg) Could you tell me an alternative method to get this complicated joint",
"I 3d printed them by splitting them in half, the outer tube did",
"rotational joint between 2 cylinders connected to another coaxial rotational joint between 2",
"been enough for mating the parts. The gap between the edges of the",
"obvious, which is removing material from the surfaces wherever the parts touch. The",
"and assembly files\") Initially when I 3d printed them by splitting them in",
"Thanks for your patience :) EDIT: Lubrication: I plan to use grease to",
"I then used Dremel and filing tools to file away about 0.5 mm",
"3D print and I wanted to know how accurate it would be). I",
"around is 3-4 mm which doesn't suggest 3D printing inaccuracy. I suspect that",
"section. It meets the inner tube at the the two ends of the",
"well as their assembly where you can use your mouse cursor to check",
"ends of the semicircle and not inside its belly (you can see it",
"for mating the parts. The gap between the edges of the outer shell",
"In a design that I need to prototype, I have a coaxial, rotational",
"surfaces wherever the parts touch. The model seems to be too warped for",
"and assembly files](https://drive.google.com/folderview?id=0B8GACx5kXowlcEwxOWI4REV6OFk&usp=sharing \"Click here for the SolidWorks parts and assembly files\") Initially",
"clearances initially (this is my first ever 3D print and I wanted to",
"here for the SolidWorks parts and assembly files](https://drive.google.com/folderview?id=0B8GACx5kXowlcEwxOWI4REV6OFk&usp=sharing \"Click here for the SolidWorks",
"(this is my first ever 3D print and I wanted to know how",
"my first ever 3D print and I wanted to know how accurate it",
"know how accurate it would be). I then used Dremel and filing tools",
"edges of the outer shell while trying to close it around is 3-4",
"files as well as their assembly where you can use your mouse cursor",
"of the outer shell while trying to close it around is 3-4 mm",
"which doesn't suggest 3D printing inaccuracy. I suspect that the outer tube isn't",
"to lubricate the sliding surfaces. Clearances: I printed them without clearances initially (this",
"tools to file away about 0.5 mm of both the surfaces. It should",
"after filing the inner tube sufficiently. [](https://i.stack.imgur.com/OjlVJ.jpg) Could you tell",
"by splitting them in half, the outer tube did not close, even after",
"working? I need to 3D print them. I plan to use ABS for",
"coaxial rotational joint between 2 cylinders by a hinge. I have attached the",
"3D printing. Thanks for your patience :) EDIT: Lubrication: I plan to use",
"the surfaces. It should have been enough for mating the parts. The gap",
"it around is 3-4 mm which doesn't suggest 3D printing inaccuracy. I suspect",
"mm which doesn't suggest 3D printing inaccuracy. I suspect that the outer tube",
"its belly (you can see it in the picture). I have already tried",
"\"Click here for the SolidWorks parts and assembly files\") Initially when I 3d",
"surfaces. Clearances: I printed them without clearances initially (this is my first ever",
"tell me an alternative method to get this complicated joint working? I need",
"and not inside its belly (you can see it in the picture). I",
"3D printing inaccuracy. I suspect that the outer tube isn't circular enough in",
"how they move. [Click here for the SolidWorks parts and assembly files](https://drive.google.com/folderview?id=0B8GACx5kXowlcEwxOWI4REV6OFk&usp=sharing \"Click",
"material from the surfaces wherever the parts touch. The model seems to be",
"model seems to be too warped for any success. The parts were printed",
"the outer tube did not close, even after filing the inner tube sufficiently.",
"of both the surfaces. It should have been enough for mating the parts.",
"It meets the inner tube at the the two ends of the semicircle",
"their assembly where you can use your mouse cursor to check how they",
"I need to prototype, I have a coaxial, rotational joint between 2 cylinders",
"sufficiently. [](https://i.stack.imgur.com/OjlVJ.jpg) Could you tell me an alternative method to",
"print and I wanted to know how accurate it would be). I then",
"tube isn't circular enough in cross section. It meets the inner tube at",
"I plan to use ABS for the 3D printing. Thanks for your patience",
"success. The parts were printed upwards from the bottom, so it is not",
"is 3-4 mm which doesn't suggest 3D printing inaccuracy. I suspect that the",
"mouse cursor to check how they move. [Click here for the SolidWorks parts",
"they move. [Click here for the SolidWorks parts and assembly files](https://drive.google.com/folderview?id=0B8GACx5kXowlcEwxOWI4REV6OFk&usp=sharing \"Click here",
"mm of both the surfaces. It should have been enough for mating the",
"I need to 3D print them. I plan to use ABS for the",
"EDIT: Lubrication: I plan to use grease to lubricate the sliding surfaces. Clearances:",
"wanted to know how accurate it would be). I then used Dremel and",
"warped for any success. The parts were printed upwards from the bottom, so",
"printed upwards from the bottom, so it is not the warping due to",
"to know how accurate it would be). I then used Dremel and filing",
"plan to use ABS for the 3D printing. Thanks for your patience :)",
"cursor to check how they move. [Click here for the SolidWorks parts and",
"did not close, even after filing the inner tube sufficiently. [](https://i.stack.imgur.com/OjlVJ.jpg) Could you tell me an alternative method to get this complicated",
"doesn't suggest 3D printing inaccuracy. I suspect that the outer tube isn't circular",
"enough for mating the parts. The gap between the edges of the outer",
"an alternative method to get this complicated joint working? I need to 3D",
"printing inaccuracy. I suspect that the outer tube isn't circular enough in cross",
"shell while trying to close it around is 3-4 mm which doesn't suggest",
"the outer tube isn't circular enough in cross section. It meets the inner",
"initially (this is my first ever 3D print and I wanted to know",
"cylinders connected to another coaxial rotational joint between 2 cylinders by a hinge.",
"cylinders by a hinge. I have attached the individual part files as well",
"the parts. The gap between the edges of the outer shell while trying",
"used Dremel and filing tools to file away about 0.5 mm of both",
"hinge. I have attached the individual part files as well as their assembly",
"get this complicated joint working? I need to 3D print them. I plan",
"to use grease to lubricate the sliding surfaces. Clearances: I printed them without",
"inner tube at the the two ends of the semicircle and not inside",
"outer tube did not close, even after filing the inner tube sufficiently. [![enter",
"have attached the individual part files as well as their assembly where you",
"without clearances initially (this is my first ever 3D print and I wanted",
"suggest 3D printing inaccuracy. I suspect that the outer tube isn't circular enough",
"meets the inner tube at the the two ends of the semicircle and",
"your mouse cursor to check how they move. [Click here for the SolidWorks",
"as well as their assembly where you can use your mouse cursor to",
"print them. I plan to use ABS for the 3D printing. Thanks for",
"can use your mouse cursor to check how they move. [Click here for",
"not inside its belly (you can see it in the picture). I have",
"0.5 mm of both the surfaces. It should have been enough for mating",
"I suspect that the outer tube isn't circular enough in cross section. It",
"and filing tools to file away about 0.5 mm of both the surfaces.",
"to use ABS for the 3D printing. Thanks for your patience :) EDIT:",
"were printed upwards from the bottom, so it is not the warping due",
"to prototype, I have a coaxial, rotational joint between 2 cylinders connected to",
"the outer shell while trying to close it around is 3-4 mm which"
] |
[
"in Tinkercad, the object appears two inches wide (in cm). The security on",
"I see errors in the object. It seems like there are issues with",
"now at the library with the technician.) Here is a screenshot of what",
"Plus). (I am now at the library with the technician.) Here is a",
"the STL file at the netFabb website. 4. I then import the STL",
"printer websites in Tinkercad, the object appears two inches wide (in cm). The",
"is a screenshot of what I am trying to print. It is a",
"when you upload an STL file. I am not sure why this happens.",
"I have found that meshconverter.com produces better STL files than greentoken. 3. I",
"advice. **Update** I just wanted to add that the netFabb website does not",
"DAE file. 2. I have found that meshconverter.com produces better STL files than",
"get the printer running smoothly for patrons. I submitted a file with my",
"set up window? Additional notes: The library now has the latest version of",
"near as sophisticated as SketchUp. But, it doesn't claim to be. I have",
"at your file to give you advice. **Update** I just wanted to add",
"the item on the screen to 2 inches. I watched him do it.",
"no longer fix SketchUp STL files with netFabb. When I bring them into",
"STL file. It was GreenToken.com. If I open the object's STL file in",
"website does not export STL files after it fixes them. It now gives",
"used a website to convert the DAE file exported from Sketchup to an",
"But, the item is printed with a base of 2 inches, and the",
"2 inches. I watched him do it. But, the item is printed with",
"I am trying to print. It is a replacement clip for a messenger",
"there some settings the tech guy in the library is missing in this",
"missing in this set up window? Additional notes: The library now has the",
"this? I can get more info if someone can give me the right",
"the 3D printer websites in Tinkercad, the object appears two inches wide (in",
"the latest version of SketchUp on Macs. They are working on installing the",
"it is resized to 2 inches wide in the MakerBot software to be",
"who runs the printer for patrons is having trouble getting a project of",
"I have been submitting Sketchup files converted to STL files for printing. The",
"can contact the printer ahead of time and they can look at your",
"The tech is open to taking suggestions. He wants to get the printer",
"wide in the MakerBot software to be sent to the printer, why is",
"STL file into TinkerCad to view it. If there are problems in the",
"into TinkerCad to view it. If there are problems in the file, I",
"Does anyone have suggestions about this? I can get more info if someone",
"right questions to ask. The tech is open to taking suggestions. He wants",
"with my own base with supports made in Sketchup. But, the tech guy",
"TinkerCad. You can see the prices, the material available and the location of",
"I watched him do it. But, the item is printed with a base",
"now this: 1. I create something in SU and export it as a",
"suggestions about this? I can get more info if someone can give me",
"plugin. (Security issues) My process for producing an STL file to print is",
"that there is a way to export the STL file to 3D printer",
"have suggestions about this? I can get more info if someone can give",
"to get the printer running smoothly for patrons. I submitted a file with",
"Makerbot 3D printer. I have been submitting Sketchup files converted to STL files",
"website. 4. I then import the STL file into TinkerCad to view it.",
"available and the location of the company/person doing the printing. You can contact",
"runs the printer for patrons is having trouble getting a project of mine",
"The library now has the latest version of SketchUp on Macs. They are",
"to print is now this: 1. I create something in SU and export",
"of the company/person doing the printing. You can contact the printer ahead of",
"the object appears two inches wide. And, if I open the file in",
"see them. And, I run it through netFabb again. I can also modify",
"tech guy said he needs to set the printer to create it's own",
"guy who runs the printer for patrons is having trouble getting a project",
"been submitting Sketchup files converted to STL files for printing. The tech guy",
"where near as sophisticated as SketchUp. But, it doesn't claim to be. I",
"smoothly for patrons. I submitted a file with my own base with supports",
"3MF file format when you upload an STL file. I am not sure",
"to be 2 inches across. <https://flic.kr/p/EtdM6s> Here is the printer: <https://flic.kr/p/E5F1M6> I used",
"it. But, the item is printed with a base of 2 inches, and",
"My process for producing an STL file to print is now this: 1.",
"the DAE file exported from Sketchup to an STL file. It was GreenToken.com.",
"can give me the right questions to ask. The tech is open to",
"fix SketchUp STL files with netFabb. When I bring them into TinkerCad, I",
"export STL files after it fixes them. It now gives you a 3MF",
"a way to export the STL file to 3D printer hubs through TinkerCad.",
"it through netFabb again. I can also modify the file in TinkerCad. It",
"mine to come out to be the right size. I need this item",
"MakerBot software to be sent to the printer, why is it printing the",
"shown here: <https://flic.kr/p/EashnD> Printer: Makerbot Replicator with Smart Extruder (not Plus). (I am",
"not the object? Are there some settings the tech guy in the library",
"2. I have found that meshconverter.com produces better STL files than greentoken. 3.",
"The tech guy sizes the item on the screen to 2 inches. I",
"a base of 2 inches, and the item itself comes out smaller. Does",
"base of 2 inches, and the item itself comes out smaller. Does anyone",
"3D printer websites in Tinkercad, the object appears two inches wide (in cm).",
"I can see them. And, I run it through netFabb again. I can",
"better STL files than greentoken. 3. I then upload/fix the STL file at",
"longer fix SketchUp STL files with netFabb. When I bring them into TinkerCad,",
"no where near as sophisticated as SketchUp. But, it doesn't claim to be.",
"in the library is missing in this set up window? Additional notes: The",
"the printing. You can contact the printer ahead of time and they can",
"be 2 inches wide. The tech guy sizes the item on the screen",
"inches wide and not the object? Are there some settings the tech guy",
"STL files than greentoken. 3. I then upload/fix the STL file at the",
"an STL file to print is now this: 1. I create something in",
"come out to be the right size. I need this item go be",
"project of mine to come out to be the right size. I need",
"of mine to come out to be the right size. I need this",
"be. I have found that there is a way to export the STL",
"3D printer hubs through TinkerCad. You can see the prices, the material available",
"this happens. But, this has put a big wrench in my process. I",
"with netFabb. When I bring them into TinkerCad, I see errors in the",
"window? Additional notes: The library now has the latest version of SketchUp on",
"something in SU and export it as a DAE file. 2. I have",
"the printer: <https://flic.kr/p/E5F1M6> I used a website to convert the DAE file exported",
"that the netFabb website does not export STL files after it fixes them.",
"has the latest version of SketchUp on Macs. They are working on installing",
"the object's STL file in Tinkercad, the object appears two inches wide. And,",
"need this item go be 2 inches wide. The tech guy sizes the",
"the printer to create it's own base and supports. Additional info: When I",
"And, if I open the file in one of the 3D printer websites",
"But, this has put a big wrench in my process. I can no",
"issues) My process for producing an STL file to print is now this:",
"file. It was GreenToken.com. If I open the object's STL file in Tinkercad,",
"on installing the STL plugin. (Security issues) My process for producing an STL",
"the right questions to ask. The tech is open to taking suggestions. He",
"computers do not allow me to apply plug-ins to Sketchup. The library's Tech",
"file to give you advice. **Update** I just wanted to add that the",
"to come out to be the right size. I need this item go",
"TinkerCad, I see errors in the object. It seems like there are issues",
"them into TinkerCad, I see errors in the object. It seems like there",
"are problems in the file, I can see them. And, I run it",
"to convert the DAE file exported from Sketchup to an STL file. It",
"I then upload/fix the STL file at the netFabb website. 4. I then",
"Additional info: When I printed it by letting Makerbot create the base and",
"through netFabb again. I can also modify the file in TinkerCad. It is",
"info: When I printed it by letting Makerbot create the base and supports,",
"2 inches across. <https://flic.kr/p/EtdM6s> Here is the printer: <https://flic.kr/p/E5F1M6> I used a website",
"printing the generated base 2 inches wide and not the object? Are there",
"found that meshconverter.com produces better STL files than greentoken. 3. I then upload/fix",
"I am not sure why this happens. But, this has put a big",
"to apply plug-ins to Sketchup. The library's Tech staff is going to eventually",
"the right size. I need this item go be 2 inches wide. The",
"replacement clip for a messenger bag. So, it has to be 2 inches",
"getting a project of mine to come out to be the right size.",
"patrons. I submitted a file with my own base with supports made in",
"it. If there are problems in the file, I can see them. And,",
"for patrons. I submitted a file with my own base with supports made",
"can look at your file to give you advice. **Update** I just wanted",
"item is printed with a base of 2 inches, and the item itself",
"the library's computers do not allow me to apply plug-ins to Sketchup. The",
"settings the tech guy in the library is missing in this set up",
"the library with the technician.) Here is a screenshot of what I am",
"size. I need this item go be 2 inches wide. The tech guy",
"wide. And, if I open the file in one of the 3D printer",
"going to eventually put the plug-in in there. If it is resized to",
"set the printer to create it's own base and supports. Additional info: When",
"of SketchUp on Macs. They are working on installing the STL plugin. (Security",
"location of the company/person doing the printing. You can contact the printer ahead",
"I bring them into TinkerCad, I see errors in the object. It seems",
"in the MakerBot software to be sent to the printer, why is it",
"you a 3MF file format when you upload an STL file. I am",
"file in one of the 3D printer websites in Tinkercad, the object appears",
"by letting Makerbot create the base and supports, it came out to be",
"the STL plugin. (Security issues) My process for producing an STL file to",
"patrons is having trouble getting a project of mine to come out to",
"the screen to 2 inches. I watched him do it. But, the item",
"info if someone can give me the right questions to ask. The tech",
"the generated base 2 inches wide and not the object? Are there some",
"greentoken. 3. I then upload/fix the STL file at the netFabb website. 4.",
"I can get more info if someone can give me the right questions",
"has to be 2 inches across. <https://flic.kr/p/EtdM6s> Here is the printer: <https://flic.kr/p/E5F1M6> I",
"after it fixes them. It now gives you a 3MF file format when",
"the local libraries has a new small Makerbot 3D printer. I have been",
"So, it has to be 2 inches across. <https://flic.kr/p/EtdM6s> Here is the printer:",
"printed with a base of 2 inches, and the item itself comes out",
"files converted to STL files for printing. The tech guy who runs the",
"running smoothly for patrons. I submitted a file with my own base with",
"open to taking suggestions. He wants to get the printer running smoothly for",
"them. It now gives you a 3MF file format when you upload an",
"notes: The library now has the latest version of SketchUp on Macs. They",
"supports, it came out to be 1 3/4\" as shown here: <https://flic.kr/p/EashnD> Printer:",
"STL file to print is now this: 1. I create something in SU",
"upload an STL file. I am not sure why this happens. But, this",
"The security on the library's computers do not allow me to apply plug-ins",
"a 3MF file format when you upload an STL file. I am not",
"2 inches wide and not the object? Are there some settings the tech",
"to export the STL file to 3D printer hubs through TinkerCad. You can",
"here: <https://flic.kr/p/EashnD> Printer: Makerbot Replicator with Smart Extruder (not Plus). (I am now",
"netFabb again. I can also modify the file in TinkerCad. It is no",
"installing the STL plugin. (Security issues) My process for producing an STL file",
"TinkerCad. It is no where near as sophisticated as SketchUp. But, it doesn't",
"not sure why this happens. But, this has put a big wrench in",
"sure why this happens. But, this has put a big wrench in my",
"export it as a DAE file. 2. I have found that meshconverter.com produces",
"<https://flic.kr/p/EashnD> Printer: Makerbot Replicator with Smart Extruder (not Plus). (I am now at",
"SketchUp on Macs. They are working on installing the STL plugin. (Security issues)",
"I submitted a file with my own base with supports made in Sketchup.",
"base and supports, it came out to be 1 3/4\" as shown here:",
"him do it. But, the item is printed with a base of 2",
"print. It is a replacement clip for a messenger bag. So, it has",
"inches wide (in cm). The security on the library's computers do not allow",
"file to print is now this: 1. I create something in SU and",
"as a DAE file. 2. I have found that meshconverter.com produces better STL",
"printer: <https://flic.kr/p/E5F1M6> I used a website to convert the DAE file exported from",
"two inches wide (in cm). The security on the library's computers do not",
"made in Sketchup. But, the tech guy said he needs to set the",
"Sketchup. The library's Tech staff is going to eventually put the plug-in in",
"the item is printed with a base of 2 inches, and the item",
"and export it as a DAE file. 2. I have found that meshconverter.com",
"library with the technician.) Here is a screenshot of what I am trying",
"me to apply plug-ins to Sketchup. The library's Tech staff is going to",
"And, I run it through netFabb again. I can also modify the file",
"a new small Makerbot 3D printer. I have been submitting Sketchup files converted",
"tech guy sizes the item on the screen to 2 inches. I watched",
"if I open the file in one of the 3D printer websites in",
"do it. But, the item is printed with a base of 2 inches,",
"to 2 inches. I watched him do it. But, the item is printed",
"3. I then upload/fix the STL file at the netFabb website. 4. I",
"can see the prices, the material available and the location of the company/person",
"library's Tech staff is going to eventually put the plug-in in there. If",
"local libraries has a new small Makerbot 3D printer. I have been submitting",
"it by letting Makerbot create the base and supports, it came out to",
"file in Tinkercad, the object appears two inches wide. And, if I open",
"needs to set the printer to create it's own base and supports. Additional",
"files with netFabb. When I bring them into TinkerCad, I see errors in",
"the printer, why is it printing the generated base 2 inches wide and",
"letting Makerbot create the base and supports, it came out to be 1",
"object appears two inches wide (in cm). The security on the library's computers",
"have found that there is a way to export the STL file to",
"why is it printing the generated base 2 inches wide and not the",
"you advice. **Update** I just wanted to add that the netFabb website does",
"Sketchup to an STL file. It was GreenToken.com. If I open the object's",
"to STL files for printing. The tech guy who runs the printer for",
"is the printer: <https://flic.kr/p/E5F1M6> I used a website to convert the DAE file",
"file in TinkerCad. It is no where near as sophisticated as SketchUp. But,",
"have been submitting Sketchup files converted to STL files for printing. The tech",
"doing the printing. You can contact the printer ahead of time and they",
"in this set up window? Additional notes: The library now has the latest",
"ahead of time and they can look at your file to give you",
"to be the right size. I need this item go be 2 inches",
"But, it doesn't claim to be. I have found that there is a",
"it's own base and supports. Additional info: When I printed it by letting",
"3/4\" as shown here: <https://flic.kr/p/EashnD> Printer: Makerbot Replicator with Smart Extruder (not Plus).",
"the item itself comes out smaller. Does anyone have suggestions about this? I",
"appears two inches wide (in cm). The security on the library's computers do",
"in there. If it is resized to 2 inches wide in the MakerBot",
"Here is the printer: <https://flic.kr/p/E5F1M6> I used a website to convert the DAE",
"When I printed it by letting Makerbot create the base and supports, it",
"software to be sent to the printer, why is it printing the generated",
"to Sketchup. The library's Tech staff is going to eventually put the plug-in",
"of the 3D printer websites in Tinkercad, the object appears two inches wide",
"staff is going to eventually put the plug-in in there. If it is",
"the technician.) Here is a screenshot of what I am trying to print.",
"file at the netFabb website. 4. I then import the STL file into",
"then upload/fix the STL file at the netFabb website. 4. I then import",
"the material available and the location of the company/person doing the printing. You",
"Sketchup files converted to STL files for printing. The tech guy who runs",
"object? Are there some settings the tech guy in the library is missing",
"It is no where near as sophisticated as SketchUp. But, it doesn't claim",
"print is now this: 1. I create something in SU and export it",
"has put a big wrench in my process. I can no longer fix",
"again. I can also modify the file in TinkerCad. It is no where",
"the MakerBot software to be sent to the printer, why is it printing",
"1. I create something in SU and export it as a DAE file.",
"you upload an STL file. I am not sure why this happens. But,",
"and not the object? Are there some settings the tech guy in the",
"am now at the library with the technician.) Here is a screenshot of",
"The tech guy who runs the printer for patrons is having trouble getting",
"supports made in Sketchup. But, the tech guy said he needs to set",
"that meshconverter.com produces better STL files than greentoken. 3. I then upload/fix the",
"item on the screen to 2 inches. I watched him do it. But,",
"came out to be 1 3/4\" as shown here: <https://flic.kr/p/EashnD> Printer: Makerbot Replicator",
"library's computers do not allow me to apply plug-ins to Sketchup. The library's",
"If I open the object's STL file in Tinkercad, the object appears two",
"to give you advice. **Update** I just wanted to add that the netFabb",
"look at your file to give you advice. **Update** I just wanted to",
"just wanted to add that the netFabb website does not export STL files",
"for a messenger bag. So, it has to be 2 inches across. <https://flic.kr/p/EtdM6s>",
"give me the right questions to ask. The tech is open to taking",
"netFabb website does not export STL files after it fixes them. It now",
"be 1 3/4\" as shown here: <https://flic.kr/p/EashnD> Printer: Makerbot Replicator with Smart Extruder",
"be sent to the printer, why is it printing the generated base 2",
"prices, the material available and the location of the company/person doing the printing.",
"Are there some settings the tech guy in the library is missing in",
"hubs through TinkerCad. You can see the prices, the material available and the",
"allow me to apply plug-ins to Sketchup. The library's Tech staff is going",
"object appears two inches wide. And, if I open the file in one",
"for printing. The tech guy who runs the printer for patrons is having",
"to ask. The tech is open to taking suggestions. He wants to get",
"open the object's STL file in Tinkercad, the object appears two inches wide.",
"DAE file exported from Sketchup to an STL file. It was GreenToken.com. If",
"is resized to 2 inches wide in the MakerBot software to be sent",
"be 2 inches across. <https://flic.kr/p/EtdM6s> Here is the printer: <https://flic.kr/p/E5F1M6> I used a",
"wants to get the printer running smoothly for patrons. I submitted a file",
"Makerbot Replicator with Smart Extruder (not Plus). (I am now at the library",
"than greentoken. 3. I then upload/fix the STL file at the netFabb website.",
"for producing an STL file to print is now this: 1. I create",
"and supports. Additional info: When I printed it by letting Makerbot create the",
"the printer for patrons is having trouble getting a project of mine to",
"exported from Sketchup to an STL file. It was GreenToken.com. If I open",
"working on installing the STL plugin. (Security issues) My process for producing an",
"guy said he needs to set the printer to create it's own base",
"If it is resized to 2 inches wide in the MakerBot software to",
"in SU and export it as a DAE file. 2. I have found",
"file. I am not sure why this happens. But, this has put a",
"STL plugin. (Security issues) My process for producing an STL file to print",
"having trouble getting a project of mine to come out to be the",
"out to be the right size. I need this item go be 2",
"give you advice. **Update** I just wanted to add that the netFabb website",
"screen to 2 inches. I watched him do it. But, the item is",
"from Sketchup to an STL file. It was GreenToken.com. If I open the",
"netFabb. When I bring them into TinkerCad, I see errors in the object.",
"a website to convert the DAE file exported from Sketchup to an STL",
"SketchUp. But, it doesn't claim to be. I have found that there is",
"as shown here: <https://flic.kr/p/EashnD> Printer: Makerbot Replicator with Smart Extruder (not Plus). (I",
"convert the DAE file exported from Sketchup to an STL file. It was",
"STL files after it fixes them. It now gives you a 3MF file",
"now has the latest version of SketchUp on Macs. They are working on",
"with supports made in Sketchup. But, the tech guy said he needs to",
"of 2 inches, and the item itself comes out smaller. Does anyone have",
"own base with supports made in Sketchup. But, the tech guy said he",
"2 inches, and the item itself comes out smaller. Does anyone have suggestions",
"I create something in SU and export it as a DAE file. 2.",
"go be 2 inches wide. The tech guy sizes the item on the",
"You can see the prices, the material available and the location of the",
"submitting Sketchup files converted to STL files for printing. The tech guy who",
"watched him do it. But, the item is printed with a base of",
"can see them. And, I run it through netFabb again. I can also",
"in TinkerCad. It is no where near as sophisticated as SketchUp. But, it",
"I open the file in one of the 3D printer websites in Tinkercad,",
"I can also modify the file in TinkerCad. It is no where near",
"Tech staff is going to eventually put the plug-in in there. If it",
"modify the file in TinkerCad. It is no where near as sophisticated as",
"Tinkercad, the object appears two inches wide. And, if I open the file",
"this item go be 2 inches wide. The tech guy sizes the item",
"smaller. Does anyone have suggestions about this? I can get more info if",
"see the prices, the material available and the location of the company/person doing",
"the netFabb website does not export STL files after it fixes them. It",
"**Update** I just wanted to add that the netFabb website does not export",
"errors in the object. It seems like there are issues with complex curves.",
"way to export the STL file to 3D printer hubs through TinkerCad. You",
"file to 3D printer hubs through TinkerCad. You can see the prices, the",
"is open to taking suggestions. He wants to get the printer running smoothly",
"wrench in my process. I can no longer fix SketchUp STL files with",
"claim to be. I have found that there is a way to export",
"trying to print. It is a replacement clip for a messenger bag. So,",
"website to convert the DAE file exported from Sketchup to an STL file.",
"I need this item go be 2 inches wide. The tech guy sizes",
"a messenger bag. So, it has to be 2 inches across. <https://flic.kr/p/EtdM6s> Here",
"a DAE file. 2. I have found that meshconverter.com produces better STL files",
"Additional notes: The library now has the latest version of SketchUp on Macs.",
"also modify the file in TinkerCad. It is no where near as sophisticated",
"I have found that there is a way to export the STL file",
"itself comes out smaller. Does anyone have suggestions about this? I can get",
"in my process. I can no longer fix SketchUp STL files with netFabb.",
"Tinkercad, the object appears two inches wide (in cm). The security on the",
"the plug-in in there. If it is resized to 2 inches wide in",
"inches wide. The tech guy sizes the item on the screen to 2",
"bring them into TinkerCad, I see errors in the object. It seems like",
"inches wide in the MakerBot software to be sent to the printer, why",
"do not allow me to apply plug-ins to Sketchup. The library's Tech staff",
"SU and export it as a DAE file. 2. I have found that",
"printing. The tech guy who runs the printer for patrons is having trouble",
"I used a website to convert the DAE file exported from Sketchup to",
"format when you upload an STL file. I am not sure why this",
"produces better STL files than greentoken. 3. I then upload/fix the STL file",
"contact the printer ahead of time and they can look at your file",
"get more info if someone can give me the right questions to ask.",
"them. And, I run it through netFabb again. I can also modify the",
"is missing in this set up window? Additional notes: The library now has",
"item itself comes out smaller. Does anyone have suggestions about this? I can",
"meshconverter.com produces better STL files than greentoken. 3. I then upload/fix the STL",
"on the screen to 2 inches. I watched him do it. But, the",
"are working on installing the STL plugin. (Security issues) My process for producing",
"(Security issues) My process for producing an STL file to print is now",
"small Makerbot 3D printer. I have been submitting Sketchup files converted to STL",
"<https://flic.kr/p/E5F1M6> I used a website to convert the DAE file exported from Sketchup",
"there are problems in the file, I can see them. And, I run",
"at the netFabb website. 4. I then import the STL file into TinkerCad",
"anyone have suggestions about this? I can get more info if someone can",
"apply plug-ins to Sketchup. The library's Tech staff is going to eventually put",
"the file, I can see them. And, I run it through netFabb again.",
"export the STL file to 3D printer hubs through TinkerCad. You can see",
"the file in TinkerCad. It is no where near as sophisticated as SketchUp.",
"to be 1 3/4\" as shown here: <https://flic.kr/p/EashnD> Printer: Makerbot Replicator with Smart",
"is now this: 1. I create something in SU and export it as",
"then import the STL file into TinkerCad to view it. If there are",
"STL file to 3D printer hubs through TinkerCad. You can see the prices,",
"to be sent to the printer, why is it printing the generated base",
"gives you a 3MF file format when you upload an STL file. I",
"on the library's computers do not allow me to apply plug-ins to Sketchup.",
"printed it by letting Makerbot create the base and supports, it came out",
"to create it's own base and supports. Additional info: When I printed it",
"tech guy in the library is missing in this set up window? Additional",
"to 2 inches wide in the MakerBot software to be sent to the",
"It was GreenToken.com. If I open the object's STL file in Tinkercad, the",
"I printed it by letting Makerbot create the base and supports, it came",
"and they can look at your file to give you advice. **Update** I",
"file exported from Sketchup to an STL file. It was GreenToken.com. If I",
"inches, and the item itself comes out smaller. Does anyone have suggestions about",
"producing an STL file to print is now this: 1. I create something",
"printer to create it's own base and supports. Additional info: When I printed",
"the STL file into TinkerCad to view it. If there are problems in",
"1 3/4\" as shown here: <https://flic.kr/p/EashnD> Printer: Makerbot Replicator with Smart Extruder (not",
"problems in the file, I can see them. And, I run it through",
"2 inches wide in the MakerBot software to be sent to the printer,",
"converted to STL files for printing. The tech guy who runs the printer",
"It is a replacement clip for a messenger bag. So, it has to",
"(in cm). The security on the library's computers do not allow me to",
"as sophisticated as SketchUp. But, it doesn't claim to be. I have found",
"3D printer. I have been submitting Sketchup files converted to STL files for",
"right size. I need this item go be 2 inches wide. The tech",
"file, I can see them. And, I run it through netFabb again. I",
"supports. Additional info: When I printed it by letting Makerbot create the base",
"base and supports. Additional info: When I printed it by letting Makerbot create",
"with Smart Extruder (not Plus). (I am now at the library with the",
"printer running smoothly for patrons. I submitted a file with my own base",
"the object appears two inches wide (in cm). The security on the library's",
"4. I then import the STL file into TinkerCad to view it. If",
"they can look at your file to give you advice. **Update** I just",
"an STL file. I am not sure why this happens. But, this has",
"the netFabb website. 4. I then import the STL file into TinkerCad to",
"I open the object's STL file in Tinkercad, the object appears two inches",
"generated base 2 inches wide and not the object? Are there some settings",
"printer ahead of time and they can look at your file to give",
"is it printing the generated base 2 inches wide and not the object?",
"it printing the generated base 2 inches wide and not the object? Are",
"If there are problems in the file, I can see them. And, I",
"what I am trying to print. It is a replacement clip for a",
"create the base and supports, it came out to be 1 3/4\" as",
"Extruder (not Plus). (I am now at the library with the technician.) Here",
"for patrons is having trouble getting a project of mine to come out",
"STL file. I am not sure why this happens. But, this has put",
"plug-in in there. If it is resized to 2 inches wide in the",
"sent to the printer, why is it printing the generated base 2 inches",
"TinkerCad to view it. If there are problems in the file, I can",
"printer for patrons is having trouble getting a project of mine to come",
"printing. You can contact the printer ahead of time and they can look",
"open the file in one of the 3D printer websites in Tinkercad, the",
"printer, why is it printing the generated base 2 inches wide and not",
"files than greentoken. 3. I then upload/fix the STL file at the netFabb",
"printer hubs through TinkerCad. You can see the prices, the material available and",
"base with supports made in Sketchup. But, the tech guy said he needs",
"can get more info if someone can give me the right questions to",
"He wants to get the printer running smoothly for patrons. I submitted a",
"the tech guy in the library is missing in this set up window?",
"base 2 inches wide and not the object? Are there some settings the",
"file into TinkerCad to view it. If there are problems in the file,",
"the STL file to 3D printer hubs through TinkerCad. You can see the",
"inches wide. And, if I open the file in one of the 3D",
"cm). The security on the library's computers do not allow me to apply",
"file format when you upload an STL file. I am not sure why",
"STL files for printing. The tech guy who runs the printer for patrons",
"resized to 2 inches wide in the MakerBot software to be sent to",
"Smart Extruder (not Plus). (I am now at the library with the technician.)",
"appears two inches wide. And, if I open the file in one of",
"(I am now at the library with the technician.) Here is a screenshot",
"2 inches wide. The tech guy sizes the item on the screen to",
"upload/fix the STL file at the netFabb website. 4. I then import the",
"big wrench in my process. I can no longer fix SketchUp STL files",
"and the item itself comes out smaller. Does anyone have suggestions about this?",
"material available and the location of the company/person doing the printing. You can",
"Sketchup. But, the tech guy said he needs to set the printer to",
"and supports, it came out to be 1 3/4\" as shown here: <https://flic.kr/p/EashnD>",
"It now gives you a 3MF file format when you upload an STL",
"the library is missing in this set up window? Additional notes: The library",
"with a base of 2 inches, and the item itself comes out smaller.",
"comes out smaller. Does anyone have suggestions about this? I can get more",
"is going to eventually put the plug-in in there. If it is resized",
"the company/person doing the printing. You can contact the printer ahead of time",
"this has put a big wrench in my process. I can no longer",
"at the library with the technician.) Here is a screenshot of what I",
"item go be 2 inches wide. The tech guy sizes the item on",
"why this happens. But, this has put a big wrench in my process.",
"new small Makerbot 3D printer. I have been submitting Sketchup files converted to",
"(not Plus). (I am now at the library with the technician.) Here is",
"it as a DAE file. 2. I have found that meshconverter.com produces better",
"in Tinkercad, the object appears two inches wide. And, if I open the",
"one of the 3D printer websites in Tinkercad, the object appears two inches",
"library now has the latest version of SketchUp on Macs. They are working",
"inches. I watched him do it. But, the item is printed with a",
"files for printing. The tech guy who runs the printer for patrons is",
"of what I am trying to print. It is a replacement clip for",
"GreenToken.com. If I open the object's STL file in Tinkercad, the object appears",
"of time and they can look at your file to give you advice.",
"bag. So, it has to be 2 inches across. <https://flic.kr/p/EtdM6s> Here is the",
"tech guy who runs the printer for patrons is having trouble getting a",
"But, the tech guy said he needs to set the printer to create",
"can no longer fix SketchUp STL files with netFabb. When I bring them",
"on Macs. They are working on installing the STL plugin. (Security issues) My",
"put the plug-in in there. If it is resized to 2 inches wide",
"and the location of the company/person doing the printing. You can contact the",
"wide. The tech guy sizes the item on the screen to 2 inches.",
"about this? I can get more info if someone can give me the",
"printer. I have been submitting Sketchup files converted to STL files for printing.",
"netFabb website. 4. I then import the STL file into TinkerCad to view",
"he needs to set the printer to create it's own base and supports.",
"does not export STL files after it fixes them. It now gives you",
"to be. I have found that there is a way to export the",
"submitted a file with my own base with supports made in Sketchup. But,",
"process for producing an STL file to print is now this: 1. I",
"I then import the STL file into TinkerCad to view it. If there",
"is having trouble getting a project of mine to come out to be",
"is printed with a base of 2 inches, and the item itself comes",
"more info if someone can give me the right questions to ask. The",
"ask. The tech is open to taking suggestions. He wants to get the",
"as SketchUp. But, it doesn't claim to be. I have found that there",
"add that the netFabb website does not export STL files after it fixes",
"if someone can give me the right questions to ask. The tech is",
"the prices, the material available and the location of the company/person doing the",
"not export STL files after it fixes them. It now gives you a",
"in one of the 3D printer websites in Tinkercad, the object appears two",
"file with my own base with supports made in Sketchup. But, the tech",
"guy in the library is missing in this set up window? Additional notes:",
"doesn't claim to be. I have found that there is a way to",
"Printer: Makerbot Replicator with Smart Extruder (not Plus). (I am now at the",
"up window? Additional notes: The library now has the latest version of SketchUp",
"technician.) Here is a screenshot of what I am trying to print. It",
"see errors in the object. It seems like there are issues with complex",
"a project of mine to come out to be the right size. I",
"libraries has a new small Makerbot 3D printer. I have been submitting Sketchup",
"now gives you a 3MF file format when you upload an STL file.",
"websites in Tinkercad, the object appears two inches wide (in cm). The security",
"was GreenToken.com. If I open the object's STL file in Tinkercad, the object",
"this: 1. I create something in SU and export it as a DAE",
"clip for a messenger bag. So, it has to be 2 inches across.",
"taking suggestions. He wants to get the printer running smoothly for patrons. I",
"create something in SU and export it as a DAE file. 2. I",
"a big wrench in my process. I can no longer fix SketchUp STL",
"inches across. <https://flic.kr/p/EtdM6s> Here is the printer: <https://flic.kr/p/E5F1M6> I used a website to",
"my process. I can no longer fix SketchUp STL files with netFabb. When",
"am not sure why this happens. But, this has put a big wrench",
"tech is open to taking suggestions. He wants to get the printer running",
"I run it through netFabb again. I can also modify the file in",
"plug-ins to Sketchup. The library's Tech staff is going to eventually put the",
"am trying to print. It is a replacement clip for a messenger bag.",
"sophisticated as SketchUp. But, it doesn't claim to be. I have found that",
"to taking suggestions. He wants to get the printer running smoothly for patrons.",
"<https://flic.kr/p/EtdM6s> Here is the printer: <https://flic.kr/p/E5F1M6> I used a website to convert the",
"happens. But, this has put a big wrench in my process. I can",
"fixes them. It now gives you a 3MF file format when you upload",
"found that there is a way to export the STL file to 3D",
"I just wanted to add that the netFabb website does not export STL",
"in the file, I can see them. And, I run it through netFabb",
"my own base with supports made in Sketchup. But, the tech guy said",
"some settings the tech guy in the library is missing in this set",
"files after it fixes them. It now gives you a 3MF file format",
"to an STL file. It was GreenToken.com. If I open the object's STL",
"run it through netFabb again. I can also modify the file in TinkerCad.",
"version of SketchUp on Macs. They are working on installing the STL plugin.",
"it has to be 2 inches across. <https://flic.kr/p/EtdM6s> Here is the printer: <https://flic.kr/p/E5F1M6>",
"the printer ahead of time and they can look at your file to",
"your file to give you advice. **Update** I just wanted to add that",
"wide and not the object? Are there some settings the tech guy in",
"company/person doing the printing. You can contact the printer ahead of time and",
"view it. If there are problems in the file, I can see them.",
"it fixes them. It now gives you a 3MF file format when you",
"STL files with netFabb. When I bring them into TinkerCad, I see errors",
"the location of the company/person doing the printing. You can contact the printer",
"has a new small Makerbot 3D printer. I have been submitting Sketchup files",
"When I bring them into TinkerCad, I see errors in the object. It",
"across. <https://flic.kr/p/EtdM6s> Here is the printer: <https://flic.kr/p/E5F1M6> I used a website to convert",
"Replicator with Smart Extruder (not Plus). (I am now at the library with",
"wide (in cm). The security on the library's computers do not allow me",
"the printer running smoothly for patrons. I submitted a file with my own",
"the object? Are there some settings the tech guy in the library is",
"latest version of SketchUp on Macs. They are working on installing the STL",
"a screenshot of what I am trying to print. It is a replacement",
"two inches wide. And, if I open the file in one of the",
"said he needs to set the printer to create it's own base and",
"the base and supports, it came out to be 1 3/4\" as shown",
"with the technician.) Here is a screenshot of what I am trying to",
"object's STL file in Tinkercad, the object appears two inches wide. And, if",
"me the right questions to ask. The tech is open to taking suggestions.",
"security on the library's computers do not allow me to apply plug-ins to",
"messenger bag. So, it has to be 2 inches across. <https://flic.kr/p/EtdM6s> Here is",
"You can contact the printer ahead of time and they can look at",
"sizes the item on the screen to 2 inches. I watched him do",
"to add that the netFabb website does not export STL files after it",
"SketchUp STL files with netFabb. When I bring them into TinkerCad, I see",
"a file with my own base with supports made in Sketchup. But, the",
"wanted to add that the netFabb website does not export STL files after",
"out to be 1 3/4\" as shown here: <https://flic.kr/p/EashnD> Printer: Makerbot Replicator with",
"suggestions. He wants to get the printer running smoothly for patrons. I submitted",
"import the STL file into TinkerCad to view it. If there are problems",
"questions to ask. The tech is open to taking suggestions. He wants to",
"be the right size. I need this item go be 2 inches wide.",
"the tech guy said he needs to set the printer to create it's",
"library is missing in this set up window? Additional notes: The library now",
"Here is a screenshot of what I am trying to print. It is",
"time and they can look at your file to give you advice. **Update**",
"is a way to export the STL file to 3D printer hubs through",
"an STL file. It was GreenToken.com. If I open the object's STL file",
"in Sketchup. But, the tech guy said he needs to set the printer",
"Makerbot create the base and supports, it came out to be 1 3/4\"",
"it doesn't claim to be. I have found that there is a way",
"to print. It is a replacement clip for a messenger bag. So, it",
"STL file in Tinkercad, the object appears two inches wide. And, if I",
"process. I can no longer fix SketchUp STL files with netFabb. When I",
"of the local libraries has a new small Makerbot 3D printer. I have",
"into TinkerCad, I see errors in the object. It seems like there are",
"create it's own base and supports. Additional info: When I printed it by",
"through TinkerCad. You can see the prices, the material available and the location",
"guy sizes the item on the screen to 2 inches. I watched him",
"screenshot of what I am trying to print. It is a replacement clip",
"One of the local libraries has a new small Makerbot 3D printer. I",
"to view it. If there are problems in the file, I can see",
"The library's Tech staff is going to eventually put the plug-in in there.",
"trouble getting a project of mine to come out to be the right",
"to 3D printer hubs through TinkerCad. You can see the prices, the material",
"not allow me to apply plug-ins to Sketchup. The library's Tech staff is",
"STL file at the netFabb website. 4. I then import the STL file",
"to set the printer to create it's own base and supports. Additional info:",
"there is a way to export the STL file to 3D printer hubs",
"to the printer, why is it printing the generated base 2 inches wide",
"put a big wrench in my process. I can no longer fix SketchUp",
"is a replacement clip for a messenger bag. So, it has to be",
"file. 2. I have found that meshconverter.com produces better STL files than greentoken.",
"eventually put the plug-in in there. If it is resized to 2 inches",
"can also modify the file in TinkerCad. It is no where near as",
"to eventually put the plug-in in there. If it is resized to 2",
"They are working on installing the STL plugin. (Security issues) My process for",
"the file in one of the 3D printer websites in Tinkercad, the object",
"it came out to be 1 3/4\" as shown here: <https://flic.kr/p/EashnD> Printer: Makerbot",
"someone can give me the right questions to ask. The tech is open",
"there. If it is resized to 2 inches wide in the MakerBot software",
"this set up window? Additional notes: The library now has the latest version",
"own base and supports. Additional info: When I printed it by letting Makerbot",
"have found that meshconverter.com produces better STL files than greentoken. 3. I then",
"is no where near as sophisticated as SketchUp. But, it doesn't claim to",
"I can no longer fix SketchUp STL files with netFabb. When I bring",
"Macs. They are working on installing the STL plugin. (Security issues) My process",
"out smaller. Does anyone have suggestions about this? I can get more info",
"a replacement clip for a messenger bag. So, it has to be 2"
] |
[
"settings into a file (like Json formatted)? ``` CuraEngine.exe -v -o \"c:\\3d\\test.gcode\" \"c:\\3d\\test.stl\"",
"settings to CuraEngine? Is it possible to put all these settings into a",
"way to give printer settings to CuraEngine? Is it possible to put all",
"possible to put all these settings into a file (like Json formatted)? ```",
"into a file (like Json formatted)? ``` CuraEngine.exe -v -o \"c:\\3d\\test.gcode\" \"c:\\3d\\test.stl\" ```",
"Is it possible to put all these settings into a file (like Json",
"put all these settings into a file (like Json formatted)? ``` CuraEngine.exe -v",
"What is the proper way to give printer settings to CuraEngine? Is it",
"it possible to put all these settings into a file (like Json formatted)?",
"to give printer settings to CuraEngine? Is it possible to put all these",
"CuraEngine? Is it possible to put all these settings into a file (like",
"is the proper way to give printer settings to CuraEngine? Is it possible",
"printer settings to CuraEngine? Is it possible to put all these settings into",
"these settings into a file (like Json formatted)? ``` CuraEngine.exe -v -o \"c:\\3d\\test.gcode\"",
"all these settings into a file (like Json formatted)? ``` CuraEngine.exe -v -o",
"to put all these settings into a file (like Json formatted)? ``` CuraEngine.exe",
"the proper way to give printer settings to CuraEngine? Is it possible to",
"proper way to give printer settings to CuraEngine? Is it possible to put",
"give printer settings to CuraEngine? Is it possible to put all these settings",
"to CuraEngine? Is it possible to put all these settings into a file"
] |
[
"actually 2.85 mm) filament extruders have some kind of gear reduction. Many 1.75",
"extruders have some kind of gear reduction. Many 1.75 mm extruders are direct-drive",
"direct-drive / ungeared but some do use gears. What kind of reduction ratios",
"kind of gear reduction. Many 1.75 mm extruders are direct-drive / ungeared but",
"some do use gears. What kind of reduction ratios are suitable or optimal?",
"extruders are direct-drive / ungeared but some do use gears. What kind of",
"some kind of gear reduction. Many 1.75 mm extruders are direct-drive / ungeared",
"of gear reduction. Many 1.75 mm extruders are direct-drive / ungeared but some",
"are direct-drive / ungeared but some do use gears. What kind of reduction",
"mm extruders are direct-drive / ungeared but some do use gears. What kind",
"mm (mostly are actually 2.85 mm) filament extruders have some kind of gear",
"3 mm (mostly are actually 2.85 mm) filament extruders have some kind of",
"ungeared but some do use gears. What kind of reduction ratios are suitable",
"reduction. Many 1.75 mm extruders are direct-drive / ungeared but some do use",
"Many 1.75 mm extruders are direct-drive / ungeared but some do use gears.",
"Most 3 mm (mostly are actually 2.85 mm) filament extruders have some kind",
"(mostly are actually 2.85 mm) filament extruders have some kind of gear reduction.",
"filament extruders have some kind of gear reduction. Many 1.75 mm extruders are",
"/ ungeared but some do use gears. What kind of reduction ratios are",
"mm) filament extruders have some kind of gear reduction. Many 1.75 mm extruders",
"have some kind of gear reduction. Many 1.75 mm extruders are direct-drive /",
"are actually 2.85 mm) filament extruders have some kind of gear reduction. Many",
"gear reduction. Many 1.75 mm extruders are direct-drive / ungeared but some do",
"2.85 mm) filament extruders have some kind of gear reduction. Many 1.75 mm",
"but some do use gears. What kind of reduction ratios are suitable or",
"1.75 mm extruders are direct-drive / ungeared but some do use gears. What"
] |
[
"in my 3D printer however I am having no luck in converting this",
"I had a friend request that I print out the Bathymetry of Lake",
"thin mesh that looks nothing like lake Michigan -Just for a test, I",
"After I import it, I get no errors but the output is a",
"into a printable mesh that I can manipulate to send to my 3D",
"were in a long thin area similar to the ASC import but as",
"a mesh I can use. I have tried multiple approaches with the different",
"are listed but cannot seem to get it to properly convert to a",
"into MeshLab to convert it to an STL. After I import it looks",
"3D printer however I am having no luck in converting this into a",
"Autodesk ReCap just to see what would happen. I noticed that the points",
"I browsed around I noticed that the each layer of dots was the",
"actual Bathymetry contours. I have tried multiple approaches and software beyond these but",
"it to an STL. After I import it, I get no errors but",
"a test, I imported the .xyz file into Autodesk ReCap just to see",
"Lake Michigan. Files and types are located here: <http://www.ngdc.noaa.gov/mgg/greatlakes/michigan.html> I am trying to",
"import it looks like nothing imported and I can't navigate around in the",
"files that are listed but cannot seem to get it to properly convert",
"cannot seem to get it to properly convert to a mesh. I have",
"mesh I can use. I have tried multiple approaches with the different files",
"STL. After I import it looks like nothing imported and I can't navigate",
"<http://www.ngdc.noaa.gov/mgg/greatlakes/michigan.html> I am trying to convert this into an STL file to print",
"around I noticed that the each layer of dots was the actual Bathymetry",
"mesh that looks nothing like lake Michigan -Just for a test, I imported",
"get the files to convert into a printable mesh that I can manipulate",
"was the actual Bathymetry contours. I have tried multiple approaches and software beyond",
"out the Bathymetry of Lake Michigan as a gift for her PhD adviser.",
"Michigan. Files and types are located here: <http://www.ngdc.noaa.gov/mgg/greatlakes/michigan.html> I am trying to convert",
"convert it to an STL. After I import it looks like nothing imported",
"but as I browsed around I noticed that the each layer of dots",
"After I import it looks like nothing imported and I can't navigate around",
"long, thin mesh that looks nothing like lake Michigan -Just for a test,",
"file to print in my 3D printer however I am having no luck",
"of dots was the actual Bathymetry contours. I have tried multiple approaches and",
"properly convert to a mesh. I have tried the following so far: -Import",
"I can use. I have tried multiple approaches with the different files that",
"an STL. After I import it looks like nothing imported and I can't",
"for the Bathymetry of Lake Michigan. Files and types are located here: <http://www.ngdc.noaa.gov/mgg/greatlakes/michigan.html>",
"can't navigate around in the file -Import an ASC file into MeshLab to",
"but the output is a long, thin mesh that looks nothing like lake",
"however I am having no luck in converting this into a mesh I",
"noticed that the points were in a long thin area similar to the",
"the file -Import an ASC file into MeshLab to convert it to an",
"I went to NOAA and the site had a few files for the",
"to see what would happen. I noticed that the points were in a",
"a friend request that I print out the Bathymetry of Lake Michigan as",
"that the each layer of dots was the actual Bathymetry contours. I have",
"no luck in converting this into a mesh I can use. I have",
"navigate around in the file -Import an ASC file into MeshLab to convert",
"an STL. After I import it, I get no errors but the output",
"imported and I can't navigate around in the file -Import an ASC file",
"converting this into a mesh I can use. I have tried multiple approaches",
"get it to properly convert to a mesh. I have tried the following",
"these but can't seem to get the files to convert into a printable",
"like lake Michigan -Just for a test, I imported the .xyz file into",
"layer of dots was the actual Bathymetry contours. I have tried multiple approaches",
"test, I imported the .xyz file into Autodesk ReCap just to see what",
"that the points were in a long thin area similar to the ASC",
"to the ASC import but as I browsed around I noticed that the",
"I have tried multiple approaches and software beyond these but can't seem to",
"I imported the .xyz file into Autodesk ReCap just to see what would",
"to get the files to convert into a printable mesh that I can",
"of Lake Michigan. Files and types are located here: <http://www.ngdc.noaa.gov/mgg/greatlakes/michigan.html> I am trying",
"a mesh. I have tried the following so far: -Import an .xyz file",
"the different files that are listed but cannot seem to get it to",
"NOAA and the site had a few files for the Bathymetry of Lake",
"files to convert into a printable mesh that I can manipulate to send",
"approaches with the different files that are listed but cannot seem to get",
"a long thin area similar to the ASC import but as I browsed",
"seem to get the files to convert into a printable mesh that I",
"to convert it to an STL. After I import it, I get no",
"ASC import but as I browsed around I noticed that the each layer",
"printer however I am having no luck in converting this into a mesh",
"have tried multiple approaches with the different files that are listed but cannot",
"to an STL. After I import it looks like nothing imported and I",
"site had a few files for the Bathymetry of Lake Michigan. Files and",
"but cannot seem to get it to properly convert to a mesh. I",
"ASC file into MeshLab to convert it to an STL. After I import",
"no errors but the output is a long, thin mesh that looks nothing",
"and software beyond these but can't seem to get the files to convert",
"to convert into a printable mesh that I can manipulate to send to",
"friend request that I print out the Bathymetry of Lake Michigan as a",
"as a gift for her PhD adviser. I went to NOAA and the",
"in converting this into a mesh I can use. I have tried multiple",
"looks like nothing imported and I can't navigate around in the file -Import",
"STL. After I import it, I get no errors but the output is",
"a long, thin mesh that looks nothing like lake Michigan -Just for a",
"imported the .xyz file into Autodesk ReCap just to see what would happen.",
"in the file -Import an ASC file into MeshLab to convert it to",
"the ASC import but as I browsed around I noticed that the each",
"contours. I have tried multiple approaches and software beyond these but can't seem",
"multiple approaches and software beyond these but can't seem to get the files",
"convert into a printable mesh that I can manipulate to send to my",
"can't seem to get the files to convert into a printable mesh that",
"STL file to print in my 3D printer however I am having no",
"to properly convert to a mesh. I have tried the following so far:",
"this into an STL file to print in my 3D printer however I",
"nothing like lake Michigan -Just for a test, I imported the .xyz file",
"it to properly convert to a mesh. I have tried the following so",
"print out the Bathymetry of Lake Michigan as a gift for her PhD",
"different files that are listed but cannot seem to get it to properly",
"to an STL. After I import it, I get no errors but the",
"just to see what would happen. I noticed that the points were in",
"is a long, thin mesh that looks nothing like lake Michigan -Just for",
"it to an STL. After I import it looks like nothing imported and",
"get no errors but the output is a long, thin mesh that looks",
"for a test, I imported the .xyz file into Autodesk ReCap just to",
"I noticed that the each layer of dots was the actual Bathymetry contours.",
"I have tried the following so far: -Import an .xyz file into MeshLab",
"following so far: -Import an .xyz file into MeshLab to convert it to",
"I am trying to convert this into an STL file to print in",
"I print out the Bathymetry of Lake Michigan as a gift for her",
"Files and types are located here: <http://www.ngdc.noaa.gov/mgg/greatlakes/michigan.html> I am trying to convert this",
"are located here: <http://www.ngdc.noaa.gov/mgg/greatlakes/michigan.html> I am trying to convert this into an STL",
"am having no luck in converting this into a mesh I can use.",
"errors but the output is a long, thin mesh that looks nothing like",
"Bathymetry contours. I have tried multiple approaches and software beyond these but can't",
"Michigan as a gift for her PhD adviser. I went to NOAA and",
"to get it to properly convert to a mesh. I have tried the",
"a gift for her PhD adviser. I went to NOAA and the site",
"so far: -Import an .xyz file into MeshLab to convert it to an",
"long thin area similar to the ASC import but as I browsed around",
"around in the file -Import an ASC file into MeshLab to convert it",
"to NOAA and the site had a few files for the Bathymetry of",
"files for the Bathymetry of Lake Michigan. Files and types are located here:",
"an .xyz file into MeshLab to convert it to an STL. After I",
"the Bathymetry of Lake Michigan as a gift for her PhD adviser. I",
"the Bathymetry of Lake Michigan. Files and types are located here: <http://www.ngdc.noaa.gov/mgg/greatlakes/michigan.html> I",
"similar to the ASC import but as I browsed around I noticed that",
"I can't navigate around in the file -Import an ASC file into MeshLab",
"far: -Import an .xyz file into MeshLab to convert it to an STL.",
"have tried the following so far: -Import an .xyz file into MeshLab to",
"the actual Bathymetry contours. I have tried multiple approaches and software beyond these",
"the .xyz file into Autodesk ReCap just to see what would happen. I",
"each layer of dots was the actual Bathymetry contours. I have tried multiple",
"tried multiple approaches and software beyond these but can't seem to get the",
"what would happen. I noticed that the points were in a long thin",
"but can't seem to get the files to convert into a printable mesh",
"browsed around I noticed that the each layer of dots was the actual",
"my 3D printer however I am having no luck in converting this into",
"like nothing imported and I can't navigate around in the file -Import an",
"I import it, I get no errors but the output is a long,",
"into a mesh I can use. I have tried multiple approaches with the",
"MeshLab to convert it to an STL. After I import it, I get",
"would happen. I noticed that the points were in a long thin area",
"of Lake Michigan as a gift for her PhD adviser. I went to",
"output is a long, thin mesh that looks nothing like lake Michigan -Just",
"request that I print out the Bathymetry of Lake Michigan as a gift",
"a printable mesh that I can manipulate to send to my 3D printer.",
".xyz file into MeshLab to convert it to an STL. After I import",
"am trying to convert this into an STL file to print in my",
"went to NOAA and the site had a few files for the Bathymetry",
"an STL file to print in my 3D printer however I am having",
"I have tried multiple approaches with the different files that are listed but",
"thin area similar to the ASC import but as I browsed around I",
"and types are located here: <http://www.ngdc.noaa.gov/mgg/greatlakes/michigan.html> I am trying to convert this into",
"as I browsed around I noticed that the each layer of dots was",
"the each layer of dots was the actual Bathymetry contours. I have tried",
"file into Autodesk ReCap just to see what would happen. I noticed that",
"lake Michigan -Just for a test, I imported the .xyz file into Autodesk",
"area similar to the ASC import but as I browsed around I noticed",
"have tried multiple approaches and software beyond these but can't seem to get",
"happen. I noticed that the points were in a long thin area similar",
"import but as I browsed around I noticed that the each layer of",
"Bathymetry of Lake Michigan. Files and types are located here: <http://www.ngdc.noaa.gov/mgg/greatlakes/michigan.html> I am",
"for her PhD adviser. I went to NOAA and the site had a",
"located here: <http://www.ngdc.noaa.gov/mgg/greatlakes/michigan.html> I am trying to convert this into an STL file",
"here: <http://www.ngdc.noaa.gov/mgg/greatlakes/michigan.html> I am trying to convert this into an STL file to",
"convert to a mesh. I have tried the following so far: -Import an",
"a few files for the Bathymetry of Lake Michigan. Files and types are",
"trying to convert this into an STL file to print in my 3D",
"the output is a long, thin mesh that looks nothing like lake Michigan",
"beyond these but can't seem to get the files to convert into a",
"tried the following so far: -Import an .xyz file into MeshLab to convert",
"print in my 3D printer however I am having no luck in converting",
"can use. I have tried multiple approaches with the different files that are",
"into MeshLab to convert it to an STL. After I import it, I",
"I am having no luck in converting this into a mesh I can",
"into Autodesk ReCap just to see what would happen. I noticed that the",
"Lake Michigan as a gift for her PhD adviser. I went to NOAA",
"in a long thin area similar to the ASC import but as I",
"had a friend request that I print out the Bathymetry of Lake Michigan",
"convert this into an STL file to print in my 3D printer however",
"mesh. I have tried the following so far: -Import an .xyz file into",
"convert it to an STL. After I import it, I get no errors",
"file into MeshLab to convert it to an STL. After I import it,",
"looks nothing like lake Michigan -Just for a test, I imported the .xyz",
"the site had a few files for the Bathymetry of Lake Michigan. Files",
"-Import an .xyz file into MeshLab to convert it to an STL. After",
"nothing imported and I can't navigate around in the file -Import an ASC",
"the points were in a long thin area similar to the ASC import",
"it, I get no errors but the output is a long, thin mesh",
"file -Import an ASC file into MeshLab to convert it to an STL.",
"an ASC file into MeshLab to convert it to an STL. After I",
"seem to get it to properly convert to a mesh. I have tried",
"few files for the Bathymetry of Lake Michigan. Files and types are located",
"and the site had a few files for the Bathymetry of Lake Michigan.",
"Michigan -Just for a test, I imported the .xyz file into Autodesk ReCap",
"this into a mesh I can use. I have tried multiple approaches with",
"adviser. I went to NOAA and the site had a few files for",
"that looks nothing like lake Michigan -Just for a test, I imported the",
"points were in a long thin area similar to the ASC import but",
"noticed that the each layer of dots was the actual Bathymetry contours. I",
"see what would happen. I noticed that the points were in a long",
"into an STL file to print in my 3D printer however I am",
"Bathymetry of Lake Michigan as a gift for her PhD adviser. I went",
"to print in my 3D printer however I am having no luck in",
"file into MeshLab to convert it to an STL. After I import it",
"gift for her PhD adviser. I went to NOAA and the site had",
"to convert this into an STL file to print in my 3D printer",
"luck in converting this into a mesh I can use. I have tried",
"that are listed but cannot seem to get it to properly convert to",
"the following so far: -Import an .xyz file into MeshLab to convert it",
"and I can't navigate around in the file -Import an ASC file into",
"multiple approaches with the different files that are listed but cannot seem to",
"I noticed that the points were in a long thin area similar to",
"use. I have tried multiple approaches with the different files that are listed",
"with the different files that are listed but cannot seem to get it",
"approaches and software beyond these but can't seem to get the files to",
"that I print out the Bathymetry of Lake Michigan as a gift for",
"dots was the actual Bathymetry contours. I have tried multiple approaches and software",
"to a mesh. I have tried the following so far: -Import an .xyz",
".xyz file into Autodesk ReCap just to see what would happen. I noticed",
"the files to convert into a printable mesh that I can manipulate to",
"I get no errors but the output is a long, thin mesh that",
"ReCap just to see what would happen. I noticed that the points were",
"types are located here: <http://www.ngdc.noaa.gov/mgg/greatlakes/michigan.html> I am trying to convert this into an",
"her PhD adviser. I went to NOAA and the site had a few",
"had a few files for the Bathymetry of Lake Michigan. Files and types",
"MeshLab to convert it to an STL. After I import it looks like",
"having no luck in converting this into a mesh I can use. I",
"import it, I get no errors but the output is a long, thin",
"it looks like nothing imported and I can't navigate around in the file",
"PhD adviser. I went to NOAA and the site had a few files",
"listed but cannot seem to get it to properly convert to a mesh.",
"-Just for a test, I imported the .xyz file into Autodesk ReCap just",
"-Import an ASC file into MeshLab to convert it to an STL. After",
"software beyond these but can't seem to get the files to convert into",
"to convert it to an STL. After I import it looks like nothing",
"I import it looks like nothing imported and I can't navigate around in",
"tried multiple approaches with the different files that are listed but cannot seem"
] |
[
"get lumps of charred filament deposited on my object. The slicer I used",
"stick to the raft. Does any one know how to mitigated PETG from",
"Travel -> Elevation settings. I have noticed that this helps but then I",
"deposited on my object. The slicer I used is Craft Ware and I",
"is Craft Ware and I have played with the Far Travel -> Elevation",
"of eSun PETG. So far I really like the filament. My only complaint",
"but then I have little to no adhesion to the print surface and",
"to the raft. Does any one know how to mitigated PETG from collecting",
"PETG. So far I really like the filament. My only complaint is, I",
"charred filament deposited on my object. The slicer I used is Craft Ware",
"slicer I used is Craft Ware and I have played with the Far",
"eSun PETG. So far I really like the filament. My only complaint is,",
"lumps of charred filament deposited on my object. The slicer I used is",
"like the filament. My only complaint is, I get lumps of charred filament",
"adhesion to the print surface and my supports do not stick to the",
"spool of eSun PETG. So far I really like the filament. My only",
"object. The slicer I used is Craft Ware and I have played with",
"Elevation settings. I have noticed that this helps but then I have little",
"this helps but then I have little to no adhesion to the print",
"have noticed that this helps but then I have little to no adhesion",
"I have played with the Far Travel -> Elevation settings. I have noticed",
"I have noticed that this helps but then I have little to no",
"not stick to the raft. Does any one know how to mitigated PETG",
"on my object. The slicer I used is Craft Ware and I have",
"I really like the filament. My only complaint is, I get lumps of",
"Ware and I have played with the Far Travel -> Elevation settings. I",
"bought a spool of eSun PETG. So far I really like the filament.",
"raft. Does any one know how to mitigated PETG from collecting on the",
"Does any one know how to mitigated PETG from collecting on the extruder?",
"I have recently bought a spool of eSun PETG. So far I really",
"complaint is, I get lumps of charred filament deposited on my object. The",
"recently bought a spool of eSun PETG. So far I really like the",
"of charred filament deposited on my object. The slicer I used is Craft",
"and my supports do not stick to the raft. Does any one know",
"I have little to no adhesion to the print surface and my supports",
"used is Craft Ware and I have played with the Far Travel ->",
"a spool of eSun PETG. So far I really like the filament. My",
"and I have played with the Far Travel -> Elevation settings. I have",
"the print surface and my supports do not stick to the raft. Does",
"then I have little to no adhesion to the print surface and my",
"do not stick to the raft. Does any one know how to mitigated",
"no adhesion to the print surface and my supports do not stick to",
"really like the filament. My only complaint is, I get lumps of charred",
"the Far Travel -> Elevation settings. I have noticed that this helps but",
"Far Travel -> Elevation settings. I have noticed that this helps but then",
"My only complaint is, I get lumps of charred filament deposited on my",
"filament. My only complaint is, I get lumps of charred filament deposited on",
"have recently bought a spool of eSun PETG. So far I really like",
"noticed that this helps but then I have little to no adhesion to",
"to no adhesion to the print surface and my supports do not stick",
"with the Far Travel -> Elevation settings. I have noticed that this helps",
"helps but then I have little to no adhesion to the print surface",
"The slicer I used is Craft Ware and I have played with the",
"little to no adhesion to the print surface and my supports do not",
"to the print surface and my supports do not stick to the raft.",
"-> Elevation settings. I have noticed that this helps but then I have",
"surface and my supports do not stick to the raft. Does any one",
"the raft. Does any one know how to mitigated PETG from collecting on",
"I get lumps of charred filament deposited on my object. The slicer I",
"the filament. My only complaint is, I get lumps of charred filament deposited",
"have little to no adhesion to the print surface and my supports do",
"filament deposited on my object. The slicer I used is Craft Ware and",
"I used is Craft Ware and I have played with the Far Travel",
"my object. The slicer I used is Craft Ware and I have played",
"played with the Far Travel -> Elevation settings. I have noticed that this",
"So far I really like the filament. My only complaint is, I get",
"settings. I have noticed that this helps but then I have little to",
"supports do not stick to the raft. Does any one know how to",
"far I really like the filament. My only complaint is, I get lumps",
"that this helps but then I have little to no adhesion to the",
"Craft Ware and I have played with the Far Travel -> Elevation settings.",
"only complaint is, I get lumps of charred filament deposited on my object.",
"my supports do not stick to the raft. Does any one know how",
"print surface and my supports do not stick to the raft. Does any",
"is, I get lumps of charred filament deposited on my object. The slicer",
"have played with the Far Travel -> Elevation settings. I have noticed that"
] |
[
"and the leading rods seem perfectly fine and should be able to allow",
"a level). It is from an old experimental lab doing physics or chemistry.",
"get's stuck on either sides of this way. Both driving threaded rod and",
"about 5 cm, but then it get's stuck on either sides of this",
"makerbot one's (threaded rod and two leading rods with linear ball bearings carrying",
"issues and how could I improve the performance? Do I need to take",
"linear ball bearings carrying a level). It is from an old experimental lab",
"further movement. This is as far as I can see by eye. Where",
"by eye. Where should I look to find further issues and how could",
"This is as far as I can see by eye. Where should I",
"It is from an old experimental lab doing physics or chemistry. The axis",
"with linear ball bearings carrying a level). It is from an old experimental",
"which follows schematically the same principle as the makerbot one's (threaded rod and",
"as I can see by eye. Where should I look to find further",
"I look to find further issues and how could I improve the performance?",
"rods seem perfectly fine and should be able to allow for further movement.",
"how could I improve the performance? Do I need to take the construction",
"the same principle as the makerbot one's (threaded rod and two leading rods",
"an old experimental lab doing physics or chemistry. The axis move gorgeously about",
"be able to allow for further movement. This is as far as I",
"find further issues and how could I improve the performance? Do I need",
"as far as I can see by eye. Where should I look to",
"and two leading rods with linear ball bearings carrying a level). It is",
"to allow for further movement. This is as far as I can see",
"experimental lab doing physics or chemistry. The axis move gorgeously about 5 cm,",
"either sides of this way. Both driving threaded rod and the leading rods",
"old experimental lab doing physics or chemistry. The axis move gorgeously about 5",
"and should be able to allow for further movement. This is as far",
"schematically the same principle as the makerbot one's (threaded rod and two leading",
"one's (threaded rod and two leading rods with linear ball bearings carrying a",
"look to find further issues and how could I improve the performance? Do",
"same principle as the makerbot one's (threaded rod and two leading rods with",
"rod and the leading rods seem perfectly fine and should be able to",
"can see by eye. Where should I look to find further issues and",
"5 cm, but then it get's stuck on either sides of this way.",
"of this way. Both driving threaded rod and the leading rods seem perfectly",
"could I improve the performance? Do I need to take the construction apart?",
"stuck on either sides of this way. Both driving threaded rod and the",
"it get's stuck on either sides of this way. Both driving threaded rod",
"cm, but then it get's stuck on either sides of this way. Both",
"and how could I improve the performance? Do I need to take the",
"driving threaded rod and the leading rods seem perfectly fine and should be",
"perfectly fine and should be able to allow for further movement. This is",
"fine and should be able to allow for further movement. This is as",
"further issues and how could I improve the performance? Do I need to",
"seem perfectly fine and should be able to allow for further movement. This",
"bearings carrying a level). It is from an old experimental lab doing physics",
"rods with linear ball bearings carrying a level). It is from an old",
"should be able to allow for further movement. This is as far as",
"far as I can see by eye. Where should I look to find",
"The axis move gorgeously about 5 cm, but then it get's stuck on",
"but then it get's stuck on either sides of this way. Both driving",
"axis move gorgeously about 5 cm, but then it get's stuck on either",
"leading rods seem perfectly fine and should be able to allow for further",
"sides of this way. Both driving threaded rod and the leading rods seem",
"z-axis which follows schematically the same principle as the makerbot one's (threaded rod",
"a z-axis which follows schematically the same principle as the makerbot one's (threaded",
"movement. This is as far as I can see by eye. Where should",
"I can see by eye. Where should I look to find further issues",
"(threaded rod and two leading rods with linear ball bearings carrying a level).",
"eye. Where should I look to find further issues and how could I",
"two leading rods with linear ball bearings carrying a level). It is from",
"or chemistry. The axis move gorgeously about 5 cm, but then it get's",
"gorgeously about 5 cm, but then it get's stuck on either sides of",
"is as far as I can see by eye. Where should I look",
"Both driving threaded rod and the leading rods seem perfectly fine and should",
"is from an old experimental lab doing physics or chemistry. The axis move",
"level). It is from an old experimental lab doing physics or chemistry. The",
"the leading rods seem perfectly fine and should be able to allow for",
"then it get's stuck on either sides of this way. Both driving threaded",
"to find further issues and how could I improve the performance? Do I",
"carrying a level). It is from an old experimental lab doing physics or",
"for further movement. This is as far as I can see by eye.",
"lab doing physics or chemistry. The axis move gorgeously about 5 cm, but",
"this way. Both driving threaded rod and the leading rods seem perfectly fine",
"from an old experimental lab doing physics or chemistry. The axis move gorgeously",
"have a z-axis which follows schematically the same principle as the makerbot one's",
"physics or chemistry. The axis move gorgeously about 5 cm, but then it",
"I have a z-axis which follows schematically the same principle as the makerbot",
"threaded rod and the leading rods seem perfectly fine and should be able",
"should I look to find further issues and how could I improve the",
"Where should I look to find further issues and how could I improve",
"allow for further movement. This is as far as I can see by",
"rod and two leading rods with linear ball bearings carrying a level). It",
"doing physics or chemistry. The axis move gorgeously about 5 cm, but then",
"leading rods with linear ball bearings carrying a level). It is from an",
"ball bearings carrying a level). It is from an old experimental lab doing",
"way. Both driving threaded rod and the leading rods seem perfectly fine and",
"the makerbot one's (threaded rod and two leading rods with linear ball bearings",
"as the makerbot one's (threaded rod and two leading rods with linear ball",
"chemistry. The axis move gorgeously about 5 cm, but then it get's stuck",
"move gorgeously about 5 cm, but then it get's stuck on either sides",
"see by eye. Where should I look to find further issues and how",
"follows schematically the same principle as the makerbot one's (threaded rod and two",
"able to allow for further movement. This is as far as I can",
"principle as the makerbot one's (threaded rod and two leading rods with linear",
"on either sides of this way. Both driving threaded rod and the leading"
] |
[
"the axis and the print bed again. So two motors seem more like",
"on the other side that is connected to the motor axis with a",
"seem more like an disadvantage to me. Could someone please shed some light",
"motors. And after playing around with a two motor model, I find it",
"the [Prosi i3](http://reprap.org/wiki/Prosi_i3) or the Mendel90 have two Z motors. And after playing",
"the print bed again. So two motors seem more like an disadvantage to",
"really good solution. Other printers, like the [Prosi i3](http://reprap.org/wiki/Prosi_i3) or the Mendel90 have",
"add a threaded rod on the other side that is connected to the",
"after playing around with a two motor model, I find it pretty annoying",
"motors seem more like an disadvantage to me. Could someone please shed some",
"example, there is the [3drag](http://reprap.org/wiki/3drag) that has only one motor and a smooth",
"the motor axis with a belt - which seems to be a really",
"Other printers, like the [Prosi i3](http://reprap.org/wiki/Prosi_i3) or the Mendel90 have two Z motors.",
"motor model, I find it pretty annoying when they get out of sync",
"solution. Other printers, like the [Prosi i3](http://reprap.org/wiki/Prosi_i3) or the Mendel90 have two Z",
"when they get out of sync and I need to calibrate the axis",
"bed again. So two motors seem more like an disadvantage to me. Could",
"a two motor model, I find it pretty annoying when they get out",
"models use only a single motor for the Z axis, others use two.",
"threaded rod on the other side that is connected to the motor axis",
"two motor model, I find it pretty annoying when they get out of",
"use only a single motor for the Z axis, others use two. For",
"the other side that is connected to the motor axis with a belt",
"axis, others use two. For example, there is the [3drag](http://reprap.org/wiki/3drag) that has only",
"which seems to be a really good solution. Other printers, like the [Prosi",
"a really good solution. Other printers, like the [Prosi i3](http://reprap.org/wiki/Prosi_i3) or the Mendel90",
"print bed again. So two motors seem more like an disadvantage to me.",
"Some RepRap models use only a single motor for the Z axis, others",
"has only one motor and a smooth rod on the other side. There",
"that has only one motor and a smooth rod on the other side.",
"axis and the print bed again. So two motors seem more like an",
"to the motor axis with a belt - which seems to be a",
"again. So two motors seem more like an disadvantage to me. Could someone",
"connected to the motor axis with a belt - which seems to be",
"good solution. Other printers, like the [Prosi i3](http://reprap.org/wiki/Prosi_i3) or the Mendel90 have two",
"side. There are modifications that add a threaded rod on the other side",
"side that is connected to the motor axis with a belt - which",
"There are modifications that add a threaded rod on the other side that",
"sync and I need to calibrate the axis and the print bed again.",
"Mendel90 have two Z motors. And after playing around with a two motor",
"the Mendel90 have two Z motors. And after playing around with a two",
"two Z motors. And after playing around with a two motor model, I",
"single motor for the Z axis, others use two. For example, there is",
"motor axis with a belt - which seems to be a really good",
"Z motors. And after playing around with a two motor model, I find",
"need to calibrate the axis and the print bed again. So two motors",
"for the Z axis, others use two. For example, there is the [3drag](http://reprap.org/wiki/3drag)",
"an disadvantage to me. Could someone please shed some light on why most",
"motor for the Z axis, others use two. For example, there is the",
"out of sync and I need to calibrate the axis and the print",
"others use two. For example, there is the [3drag](http://reprap.org/wiki/3drag) that has only one",
"that add a threaded rod on the other side that is connected to",
"someone please shed some light on why most RepRaps have two Z motors",
"like the [Prosi i3](http://reprap.org/wiki/Prosi_i3) or the Mendel90 have two Z motors. And after",
"and the print bed again. So two motors seem more like an disadvantage",
"I find it pretty annoying when they get out of sync and I",
"with a two motor model, I find it pretty annoying when they get",
"or the Mendel90 have two Z motors. And after playing around with a",
"calibrate the axis and the print bed again. So two motors seem more",
"smooth rod on the other side. There are modifications that add a threaded",
"rod on the other side. There are modifications that add a threaded rod",
"more like an disadvantage to me. Could someone please shed some light on",
"have two Z motors. And after playing around with a two motor model,",
"other side. There are modifications that add a threaded rod on the other",
"that is connected to the motor axis with a belt - which seems",
"to calibrate the axis and the print bed again. So two motors seem",
"one motor and a smooth rod on the other side. There are modifications",
"printers, like the [Prosi i3](http://reprap.org/wiki/Prosi_i3) or the Mendel90 have two Z motors. And",
"only a single motor for the Z axis, others use two. For example,",
"playing around with a two motor model, I find it pretty annoying when",
"with a belt - which seems to be a really good solution. Other",
"of sync and I need to calibrate the axis and the print bed",
"it pretty annoying when they get out of sync and I need to",
"around with a two motor model, I find it pretty annoying when they",
"I need to calibrate the axis and the print bed again. So two",
"two. For example, there is the [3drag](http://reprap.org/wiki/3drag) that has only one motor and",
"other side that is connected to the motor axis with a belt -",
"use two. For example, there is the [3drag](http://reprap.org/wiki/3drag) that has only one motor",
"And after playing around with a two motor model, I find it pretty",
"to me. Could someone please shed some light on why most RepRaps have",
"a threaded rod on the other side that is connected to the motor",
"they get out of sync and I need to calibrate the axis and",
"get out of sync and I need to calibrate the axis and the",
"are modifications that add a threaded rod on the other side that is",
"the other side. There are modifications that add a threaded rod on the",
"model, I find it pretty annoying when they get out of sync and",
"belt - which seems to be a really good solution. Other printers, like",
"on the other side. There are modifications that add a threaded rod on",
"disadvantage to me. Could someone please shed some light on why most RepRaps",
"i3](http://reprap.org/wiki/Prosi_i3) or the Mendel90 have two Z motors. And after playing around with",
"is the [3drag](http://reprap.org/wiki/3drag) that has only one motor and a smooth rod on",
"a single motor for the Z axis, others use two. For example, there",
"For example, there is the [3drag](http://reprap.org/wiki/3drag) that has only one motor and a",
"modifications that add a threaded rod on the other side that is connected",
"rod on the other side that is connected to the motor axis with",
"pretty annoying when they get out of sync and I need to calibrate",
"a belt - which seems to be a really good solution. Other printers,",
"the [3drag](http://reprap.org/wiki/3drag) that has only one motor and a smooth rod on the",
"please shed some light on why most RepRaps have two Z motors (nowadays)?",
"RepRap models use only a single motor for the Z axis, others use",
"annoying when they get out of sync and I need to calibrate the",
"like an disadvantage to me. Could someone please shed some light on why",
"seems to be a really good solution. Other printers, like the [Prosi i3](http://reprap.org/wiki/Prosi_i3)",
"[3drag](http://reprap.org/wiki/3drag) that has only one motor and a smooth rod on the other",
"axis with a belt - which seems to be a really good solution.",
"to be a really good solution. Other printers, like the [Prosi i3](http://reprap.org/wiki/Prosi_i3) or",
"the Z axis, others use two. For example, there is the [3drag](http://reprap.org/wiki/3drag) that",
"a smooth rod on the other side. There are modifications that add a",
"is connected to the motor axis with a belt - which seems to",
"two motors seem more like an disadvantage to me. Could someone please shed",
"and a smooth rod on the other side. There are modifications that add",
"Z axis, others use two. For example, there is the [3drag](http://reprap.org/wiki/3drag) that has",
"So two motors seem more like an disadvantage to me. Could someone please",
"Could someone please shed some light on why most RepRaps have two Z",
"be a really good solution. Other printers, like the [Prosi i3](http://reprap.org/wiki/Prosi_i3) or the",
"find it pretty annoying when they get out of sync and I need",
"motor and a smooth rod on the other side. There are modifications that",
"- which seems to be a really good solution. Other printers, like the",
"me. Could someone please shed some light on why most RepRaps have two",
"and I need to calibrate the axis and the print bed again. So",
"only one motor and a smooth rod on the other side. There are",
"[Prosi i3](http://reprap.org/wiki/Prosi_i3) or the Mendel90 have two Z motors. And after playing around",
"there is the [3drag](http://reprap.org/wiki/3drag) that has only one motor and a smooth rod"
] |
[
"for the basest of n00bs when it comes to 3D parts creation? I",
"need something lightweight. tl;dr: Seeking a free, lightweight program to create .stl files",
"once and made some headway but the next time I turned my computer",
"Ideally, I'd like a program that uses those strengths but I realize that",
"open. It was just a weakling netbook that I don't even have in",
"that I don't even have in my possession anymore but the computer I'm",
"What software is best for the basest of n00bs when it comes to",
"computer on, it refused to open. It was just a weakling netbook that",
"anymore but the computer I'm currently using is rather slow and doesn't seem",
"I'm not holding my breath. I tried freeCAD once and made some headway",
"software is best for the basest of n00bs when it comes to 3D",
"best for the basest of n00bs when it comes to 3D parts creation?",
"holding my breath. I tried freeCAD once and made some headway but the",
"the computer I'm currently using is rather slow and doesn't seem to have",
"and know how to create explicit functions of volume, surface area, center of",
"phobia so I'm not holding my breath. I tried freeCAD once and made",
"creation? I have a heavy math background and know how to create explicit",
"turned my computer on, it refused to open. It was just a weakling",
"how to create explicit functions of volume, surface area, center of mass, etc.",
"a free, lightweight program to create .stl files that is good for n00bs",
"made some headway but the next time I turned my computer on, it",
"is best for the basest of n00bs when it comes to 3D parts",
"program that uses those strengths but I realize that most n00bs have a",
"and made some headway but the next time I turned my computer on,",
"much memory left either, so I still need something lightweight. tl;dr: Seeking a",
"I'm currently using is rather slow and doesn't seem to have much memory",
"that most n00bs have a crippling math phobia so I'm not holding my",
"slow and doesn't seem to have much memory left either, so I still",
"it refused to open. It was just a weakling netbook that I don't",
"refused to open. It was just a weakling netbook that I don't even",
"explicit functions of volume, surface area, center of mass, etc. Ideally, I'd like",
"but I realize that most n00bs have a crippling math phobia so I'm",
"weakling netbook that I don't even have in my possession anymore but the",
"so I'm not holding my breath. I tried freeCAD once and made some",
"create .stl files that is good for n00bs that are **not** afraid of",
"is rather slow and doesn't seem to have much memory left either, so",
"parts creation? I have a heavy math background and know how to create",
"those strengths but I realize that most n00bs have a crippling math phobia",
"something lightweight. tl;dr: Seeking a free, lightweight program to create .stl files that",
"was just a weakling netbook that I don't even have in my possession",
"doesn't seem to have much memory left either, so I still need something",
"currently using is rather slow and doesn't seem to have much memory left",
"of mass, etc. Ideally, I'd like a program that uses those strengths but",
"next time I turned my computer on, it refused to open. It was",
".stl files that is good for n00bs that are **not** afraid of math.",
"headway but the next time I turned my computer on, it refused to",
"seem to have much memory left either, so I still need something lightweight.",
"Seeking a free, lightweight program to create .stl files that is good for",
"I'd like a program that uses those strengths but I realize that most",
"basest of n00bs when it comes to 3D parts creation? I have a",
"possession anymore but the computer I'm currently using is rather slow and doesn't",
"math background and know how to create explicit functions of volume, surface area,",
"n00bs when it comes to 3D parts creation? I have a heavy math",
"I turned my computer on, it refused to open. It was just a",
"It was just a weakling netbook that I don't even have in my",
"comes to 3D parts creation? I have a heavy math background and know",
"free, lightweight program to create .stl files that is good for n00bs that",
"have in my possession anymore but the computer I'm currently using is rather",
"know how to create explicit functions of volume, surface area, center of mass,",
"the basest of n00bs when it comes to 3D parts creation? I have",
"a crippling math phobia so I'm not holding my breath. I tried freeCAD",
"and doesn't seem to have much memory left either, so I still need",
"program to create .stl files that is good for n00bs that are **not**",
"on, it refused to open. It was just a weakling netbook that I",
"I still need something lightweight. tl;dr: Seeking a free, lightweight program to create",
"I have a heavy math background and know how to create explicit functions",
"don't even have in my possession anymore but the computer I'm currently using",
"time I turned my computer on, it refused to open. It was just",
"have much memory left either, so I still need something lightweight. tl;dr: Seeking",
"not holding my breath. I tried freeCAD once and made some headway but",
"computer I'm currently using is rather slow and doesn't seem to have much",
"create explicit functions of volume, surface area, center of mass, etc. Ideally, I'd",
"volume, surface area, center of mass, etc. Ideally, I'd like a program that",
"to have much memory left either, so I still need something lightweight. tl;dr:",
"still need something lightweight. tl;dr: Seeking a free, lightweight program to create .stl",
"a weakling netbook that I don't even have in my possession anymore but",
"heavy math background and know how to create explicit functions of volume, surface",
"tried freeCAD once and made some headway but the next time I turned",
"in my possession anymore but the computer I'm currently using is rather slow",
"etc. Ideally, I'd like a program that uses those strengths but I realize",
"to 3D parts creation? I have a heavy math background and know how",
"when it comes to 3D parts creation? I have a heavy math background",
"3D parts creation? I have a heavy math background and know how to",
"even have in my possession anymore but the computer I'm currently using is",
"a program that uses those strengths but I realize that most n00bs have",
"a heavy math background and know how to create explicit functions of volume,",
"using is rather slow and doesn't seem to have much memory left either,",
"either, so I still need something lightweight. tl;dr: Seeking a free, lightweight program",
"surface area, center of mass, etc. Ideally, I'd like a program that uses",
"it comes to 3D parts creation? I have a heavy math background and",
"have a heavy math background and know how to create explicit functions of",
"I tried freeCAD once and made some headway but the next time I",
"memory left either, so I still need something lightweight. tl;dr: Seeking a free,",
"functions of volume, surface area, center of mass, etc. Ideally, I'd like a",
"lightweight. tl;dr: Seeking a free, lightweight program to create .stl files that is",
"crippling math phobia so I'm not holding my breath. I tried freeCAD once",
"lightweight program to create .stl files that is good for n00bs that are",
"background and know how to create explicit functions of volume, surface area, center",
"like a program that uses those strengths but I realize that most n00bs",
"some headway but the next time I turned my computer on, it refused",
"center of mass, etc. Ideally, I'd like a program that uses those strengths",
"just a weakling netbook that I don't even have in my possession anymore",
"rather slow and doesn't seem to have much memory left either, so I",
"left either, so I still need something lightweight. tl;dr: Seeking a free, lightweight",
"to create .stl files that is good for n00bs that are **not** afraid",
"that uses those strengths but I realize that most n00bs have a crippling",
"but the computer I'm currently using is rather slow and doesn't seem to",
"mass, etc. Ideally, I'd like a program that uses those strengths but I",
"most n00bs have a crippling math phobia so I'm not holding my breath.",
"n00bs have a crippling math phobia so I'm not holding my breath. I",
"my breath. I tried freeCAD once and made some headway but the next",
"tl;dr: Seeking a free, lightweight program to create .stl files that is good",
"the next time I turned my computer on, it refused to open. It",
"to open. It was just a weakling netbook that I don't even have",
"realize that most n00bs have a crippling math phobia so I'm not holding",
"uses those strengths but I realize that most n00bs have a crippling math",
"but the next time I turned my computer on, it refused to open.",
"freeCAD once and made some headway but the next time I turned my",
"of n00bs when it comes to 3D parts creation? I have a heavy",
"netbook that I don't even have in my possession anymore but the computer",
"my possession anymore but the computer I'm currently using is rather slow and",
"to create explicit functions of volume, surface area, center of mass, etc. Ideally,",
"so I still need something lightweight. tl;dr: Seeking a free, lightweight program to",
"I realize that most n00bs have a crippling math phobia so I'm not",
"I don't even have in my possession anymore but the computer I'm currently",
"math phobia so I'm not holding my breath. I tried freeCAD once and",
"my computer on, it refused to open. It was just a weakling netbook",
"have a crippling math phobia so I'm not holding my breath. I tried",
"area, center of mass, etc. Ideally, I'd like a program that uses those",
"breath. I tried freeCAD once and made some headway but the next time",
"of volume, surface area, center of mass, etc. Ideally, I'd like a program",
"strengths but I realize that most n00bs have a crippling math phobia so"
] |
[
"My Kossel came without instructions, I was given a set of instructions by",
"the build guides. The question is how these components fit together. I'm pretty",
"images with a component like (1). But nothing on how this and the",
"together. I'm pretty certain the stepper motor should be connected to the big",
"I'm building a Kossel Mini, and I'm stuck on the extruder motor holder.",
"17 mount\" or \"Nema 17 mounting screws\" as search terms, I find a",
"Build Guide\" by Blomker industries). I also found some instructions on the net.",
"the stepper motors for the vertical carriages, were connected in a similar way",
"the left on the bottom, (labeled (2) in the picture) presumably goes on",
"a Kossel Mini, and I'm stuck on the extruder motor holder. My Kossel",
"second from the left on the bottom, (labeled (2) in the picture) presumably",
"The screws on the right, labeled (3), are 1 cm long and 3",
"Once again, a similar procedure was needed for the motors that will move",
"the picture). The 4 holes in these components correspond to openings in the",
"extruder motor holder. My Kossel came without instructions, I was given a set",
"in a similar way to their respective holders. The round thing, second from",
"a similar way to their respective holders. The round thing, second from the",
"kit and am awaiting their answer. Meanwhile I'm hoping to get some advice",
"stepper motor is a Wantai Stepper Motor Model 42BYGHW811 . I have e-mailed",
"certain the stepper motor should be connected to the big black components (labeled",
"I'm pretty certain the stepper motor should be connected to the big black",
"4 holes in these components correspond to openings in the stepper motor; and",
"and am awaiting their answer. Meanwhile I'm hoping to get some advice here.",
"datasheets. Using \"Nema 17 mount\" or \"Nema 17 mounting screws\" as search terms,",
"by Blomker industries). I also found some instructions on the net. However, my",
". I have e-mailed the company where I bought my kit and am",
"with a component like (1). But nothing on how this and the other",
"a similar procedure was needed for the motors that will move the vertical",
"(labeled (1) and (4) in the picture). The 4 holes in these components",
"lot of images with a component like (1). But nothing on how this",
"round thing, second from the left on the bottom, (labeled (2) in the",
"together for the motor holder for an extruder for the Kossel Mini. [![Parts",
"on how this and the other components should be put together for the",
"Kossel Mini is Nema 17. Searching on \"42BYGHW811\" I mostly find datasheets. Using",
"motor for a Kossel Mini is Nema 17. Searching on \"42BYGHW811\" I mostly",
"carriages. The screws on the right, labeled (3), are 1 cm long and",
"instructions by a friend (the \"Kossel Build Guide\" by Blomker industries). I also",
"screws on the right, labeled (3), are 1 cm long and 3 mm",
"motors for the vertical carriages, were connected in a similar way to their",
"3 mm wide. The stepper motor is a Wantai Stepper Motor Model 42BYGHW811",
"Guide\" by Blomker industries). I also found some instructions on the net. However,",
"this and the other components should be put together for the motor holder",
"that will move the vertical carriages. The screws on the right, labeled (3),",
"components fit together. I'm pretty certain the stepper motor should be connected to",
"in these components correspond to openings in the stepper motor; and the stepper",
"motor should be connected to the big black components (labeled (1) and (4)",
"Searching on \"42BYGHW811\" I mostly find datasheets. Using \"Nema 17 mount\" or \"Nema",
"their answer. Meanwhile I'm hoping to get some advice here. Apparently the usual",
"industries). I also found some instructions on the net. However, my components are",
"on \"42BYGHW811\" I mostly find datasheets. Using \"Nema 17 mount\" or \"Nema 17",
"answer. Meanwhile I'm hoping to get some advice here. Apparently the usual stepper",
"and the other components should be put together for the motor holder for",
"the other components should be put together for the motor holder for an",
"a friend (the \"Kossel Build Guide\" by Blomker industries). I also found some",
"Mini is Nema 17. Searching on \"42BYGHW811\" I mostly find datasheets. Using \"Nema",
"was given a set of instructions by a friend (the \"Kossel Build Guide\"",
"should be connected to the big black components (labeled (1) and (4) in",
"1 cm long and 3 mm wide. The other screws are 2 cm",
"without instructions, I was given a set of instructions by a friend (the",
"a set of instructions by a friend (the \"Kossel Build Guide\" by Blomker",
"found some instructions on the net. However, my components are different from those",
"get some advice here. Apparently the usual stepper motor for a Kossel Mini",
"advice here. Apparently the usual stepper motor for a Kossel Mini is Nema",
"in the build guides. The question is how these components fit together. I'm",
"goes on the axis of the stepper motor. Once again, a similar procedure",
"for a Kossel Mini is Nema 17. Searching on \"42BYGHW811\" I mostly find",
"Kossel Mini, and I'm stuck on the extruder motor holder. My Kossel came",
"vertical carriages, were connected in a similar way to their respective holders. The",
"find datasheets. Using \"Nema 17 mount\" or \"Nema 17 mounting screws\" as search",
"the picture) presumably goes on the axis of the stepper motor. Once again,",
"3 mm wide. The other screws are 2 cm long and 3 mm",
"screws are 2 cm long and 3 mm wide. The stepper motor is",
"picture). The 4 holes in these components correspond to openings in the stepper",
"picture) presumably goes on the axis of the stepper motor. Once again, a",
"stepper motor for a Kossel Mini is Nema 17. Searching on \"42BYGHW811\" I",
"Mini, and I'm stuck on the extruder motor holder. My Kossel came without",
"stepper motor; and the stepper motors for the vertical carriages, were connected in",
"screws\" as search terms, I find a lot of images with a component",
"\"Kossel Build Guide\" by Blomker industries). I also found some instructions on the",
"similar way to their respective holders. The round thing, second from the left",
"and 3 mm wide. The stepper motor is a Wantai Stepper Motor Model",
"presumably goes on the axis of the stepper motor. Once again, a similar",
"should be put together for the motor holder for an extruder for the",
"But nothing on how this and the other components should be put together",
"will move the vertical carriages. The screws on the right, labeled (3), are",
"put together for the motor holder for an extruder for the Kossel Mini.",
"how these components fit together. I'm pretty certain the stepper motor should be",
"(1) and (4) in the picture). The 4 holes in these components correspond",
"I was given a set of instructions by a friend (the \"Kossel Build",
"and (4) in the picture). The 4 holes in these components correspond to",
"Meanwhile I'm hoping to get some advice here. Apparently the usual stepper motor",
"\"Nema 17 mount\" or \"Nema 17 mounting screws\" as search terms, I find",
"and the stepper motors for the vertical carriages, were connected in a similar",
"other screws are 2 cm long and 3 mm wide. The stepper motor",
"motor holder for an extruder for the Kossel Mini. [![Parts of the extruder](https://i.stack.imgur.com/l98L8.jpg",
"I'm hoping to get some advice here. Apparently the usual stepper motor for",
"by a friend (the \"Kossel Build Guide\" by Blomker industries). I also found",
"have e-mailed the company where I bought my kit and am awaiting their",
"axis of the stepper motor. Once again, a similar procedure was needed for",
"component like (1). But nothing on how this and the other components should",
"respective holders. The round thing, second from the left on the bottom, (labeled",
"the net. However, my components are different from those in the build guides.",
"components correspond to openings in the stepper motor; and the stepper motors for",
"was needed for the motors that will move the vertical carriages. The screws",
"again, a similar procedure was needed for the motors that will move the",
"carriages, were connected in a similar way to their respective holders. The round",
"awaiting their answer. Meanwhile I'm hoping to get some advice here. Apparently the",
"a component like (1). But nothing on how this and the other components",
"like (1). But nothing on how this and the other components should be",
"guides. The question is how these components fit together. I'm pretty certain the",
"be connected to the big black components (labeled (1) and (4) in the",
"is Nema 17. Searching on \"42BYGHW811\" I mostly find datasheets. Using \"Nema 17",
"some instructions on the net. However, my components are different from those in",
"these components fit together. I'm pretty certain the stepper motor should be connected",
"correspond to openings in the stepper motor; and the stepper motors for the",
"the vertical carriages. The screws on the right, labeled (3), are 1 cm",
"also found some instructions on the net. However, my components are different from",
"the extruder motor holder. My Kossel came without instructions, I was given a",
"black components (labeled (1) and (4) in the picture). The 4 holes in",
"(3), are 1 cm long and 3 mm wide. The other screws are",
"pretty certain the stepper motor should be connected to the big black components",
"different from those in the build guides. The question is how these components",
"in the picture) presumably goes on the axis of the stepper motor. Once",
"long and 3 mm wide. The other screws are 2 cm long and",
"mm wide. The stepper motor is a Wantai Stepper Motor Model 42BYGHW811 .",
"Motor Model 42BYGHW811 . I have e-mailed the company where I bought my",
"on the bottom, (labeled (2) in the picture) presumably goes on the axis",
"cm long and 3 mm wide. The other screws are 2 cm long",
"mm wide. The other screws are 2 cm long and 3 mm wide.",
"were connected in a similar way to their respective holders. The round thing,",
"holder for an extruder for the Kossel Mini. [![Parts of the extruder](https://i.stack.imgur.com/l98L8.jpg \"Parts",
"stepper motors for the vertical carriages, were connected in a similar way to",
"Nema 17. Searching on \"42BYGHW811\" I mostly find datasheets. Using \"Nema 17 mount\"",
"I mostly find datasheets. Using \"Nema 17 mount\" or \"Nema 17 mounting screws\"",
"instructions on the net. However, my components are different from those in the",
"the axis of the stepper motor. Once again, a similar procedure was needed",
"on the right, labeled (3), are 1 cm long and 3 mm wide.",
"or \"Nema 17 mounting screws\" as search terms, I find a lot of",
"and 3 mm wide. The other screws are 2 cm long and 3",
"(the \"Kossel Build Guide\" by Blomker industries). I also found some instructions on",
"mounting screws\" as search terms, I find a lot of images with a",
"(2) in the picture) presumably goes on the axis of the stepper motor.",
"right, labeled (3), are 1 cm long and 3 mm wide. The other",
"needed for the motors that will move the vertical carriages. The screws on",
"fit together. I'm pretty certain the stepper motor should be connected to the",
"I find a lot of images with a component like (1). But nothing",
"an extruder for the Kossel Mini. [![Parts of the extruder](https://i.stack.imgur.com/l98L8.jpg \"Parts of the",
"extruder for the Kossel Mini. [![Parts of the extruder](https://i.stack.imgur.com/l98L8.jpg \"Parts of the extruder\")](https://i.stack.imgur.com/l98L8.jpg",
"vertical carriages. The screws on the right, labeled (3), are 1 cm long",
"company where I bought my kit and am awaiting their answer. Meanwhile I'm",
"friend (the \"Kossel Build Guide\" by Blomker industries). I also found some instructions",
"instructions, I was given a set of instructions by a friend (the \"Kossel",
"stepper motor should be connected to the big black components (labeled (1) and",
"mostly find datasheets. Using \"Nema 17 mount\" or \"Nema 17 mounting screws\" as",
"as search terms, I find a lot of images with a component like",
"nothing on how this and the other components should be put together for",
"the vertical carriages, were connected in a similar way to their respective holders.",
"my kit and am awaiting their answer. Meanwhile I'm hoping to get some",
"to their respective holders. The round thing, second from the left on the",
"I'm stuck on the extruder motor holder. My Kossel came without instructions, I",
"The stepper motor is a Wantai Stepper Motor Model 42BYGHW811 . I have",
"Stepper Motor Model 42BYGHW811 . I have e-mailed the company where I bought",
"Apparently the usual stepper motor for a Kossel Mini is Nema 17. Searching",
"for the Kossel Mini. [![Parts of the extruder](https://i.stack.imgur.com/l98L8.jpg \"Parts of the extruder\")](https://i.stack.imgur.com/l98L8.jpg \"Parts",
"the company where I bought my kit and am awaiting their answer. Meanwhile",
"big black components (labeled (1) and (4) in the picture). The 4 holes",
"where I bought my kit and am awaiting their answer. Meanwhile I'm hoping",
"components should be put together for the motor holder for an extruder for",
"mount\" or \"Nema 17 mounting screws\" as search terms, I find a lot",
"a Wantai Stepper Motor Model 42BYGHW811 . I have e-mailed the company where",
"the Kossel Mini. [![Parts of the extruder](https://i.stack.imgur.com/l98L8.jpg \"Parts of the extruder\")](https://i.stack.imgur.com/l98L8.jpg \"Parts of",
"The question is how these components fit together. I'm pretty certain the stepper",
"Using \"Nema 17 mount\" or \"Nema 17 mounting screws\" as search terms, I",
"motor; and the stepper motors for the vertical carriages, were connected in a",
"for an extruder for the Kossel Mini. [![Parts of the extruder](https://i.stack.imgur.com/l98L8.jpg \"Parts of",
"for the motor holder for an extruder for the Kossel Mini. [![Parts of",
"hoping to get some advice here. Apparently the usual stepper motor for a",
"the stepper motor should be connected to the big black components (labeled (1)",
"motor. Once again, a similar procedure was needed for the motors that will",
"Wantai Stepper Motor Model 42BYGHW811 . I have e-mailed the company where I",
"long and 3 mm wide. The stepper motor is a Wantai Stepper Motor",
"stepper motor. Once again, a similar procedure was needed for the motors that",
"wide. The stepper motor is a Wantai Stepper Motor Model 42BYGHW811 . I",
"in the stepper motor; and the stepper motors for the vertical carriages, were",
"motor is a Wantai Stepper Motor Model 42BYGHW811 . I have e-mailed the",
"components are different from those in the build guides. The question is how",
"the motors that will move the vertical carriages. The screws on the right,",
"The other screws are 2 cm long and 3 mm wide. The stepper",
"the usual stepper motor for a Kossel Mini is Nema 17. Searching on",
"openings in the stepper motor; and the stepper motors for the vertical carriages,",
"here. Apparently the usual stepper motor for a Kossel Mini is Nema 17.",
"of images with a component like (1). But nothing on how this and",
"question is how these components fit together. I'm pretty certain the stepper motor",
"a lot of images with a component like (1). But nothing on how",
"Kossel Mini. [![Parts of the extruder](https://i.stack.imgur.com/l98L8.jpg \"Parts of the extruder\")](https://i.stack.imgur.com/l98L8.jpg \"Parts of the",
"be put together for the motor holder for an extruder for the Kossel",
"net. However, my components are different from those in the build guides. The",
"Model 42BYGHW811 . I have e-mailed the company where I bought my kit",
"my components are different from those in the build guides. The question is",
"motor holder. My Kossel came without instructions, I was given a set of",
"build guides. The question is how these components fit together. I'm pretty certain",
"to the big black components (labeled (1) and (4) in the picture). The",
"I bought my kit and am awaiting their answer. Meanwhile I'm hoping to",
"the motor holder for an extruder for the Kossel Mini. [![Parts of the",
"17 mounting screws\" as search terms, I find a lot of images with",
"their respective holders. The round thing, second from the left on the bottom,",
"find a lot of images with a component like (1). But nothing on",
"move the vertical carriages. The screws on the right, labeled (3), are 1",
"those in the build guides. The question is how these components fit together.",
"the stepper motor. Once again, a similar procedure was needed for the motors",
"wide. The other screws are 2 cm long and 3 mm wide. The",
"bought my kit and am awaiting their answer. Meanwhile I'm hoping to get",
"cm long and 3 mm wide. The stepper motor is a Wantai Stepper",
"given a set of instructions by a friend (the \"Kossel Build Guide\" by",
"search terms, I find a lot of images with a component like (1).",
"The round thing, second from the left on the bottom, (labeled (2) in",
"left on the bottom, (labeled (2) in the picture) presumably goes on the",
"stuck on the extruder motor holder. My Kossel came without instructions, I was",
"set of instructions by a friend (the \"Kossel Build Guide\" by Blomker industries).",
"on the extruder motor holder. My Kossel came without instructions, I was given",
"connected to the big black components (labeled (1) and (4) in the picture).",
"42BYGHW811 . I have e-mailed the company where I bought my kit and",
"building a Kossel Mini, and I'm stuck on the extruder motor holder. My",
"terms, I find a lot of images with a component like (1). But",
"components (labeled (1) and (4) in the picture). The 4 holes in these",
"are different from those in the build guides. The question is how these",
"is a Wantai Stepper Motor Model 42BYGHW811 . I have e-mailed the company",
"on the net. However, my components are different from those in the build",
"the stepper motor; and the stepper motors for the vertical carriages, were connected",
"\"42BYGHW811\" I mostly find datasheets. Using \"Nema 17 mount\" or \"Nema 17 mounting",
"of instructions by a friend (the \"Kossel Build Guide\" by Blomker industries). I",
"of the stepper motor. Once again, a similar procedure was needed for the",
"way to their respective holders. The round thing, second from the left on",
"holes in these components correspond to openings in the stepper motor; and the",
"on the axis of the stepper motor. Once again, a similar procedure was",
"the big black components (labeled (1) and (4) in the picture). The 4",
"for the motors that will move the vertical carriages. The screws on the",
"am awaiting their answer. Meanwhile I'm hoping to get some advice here. Apparently",
"(4) in the picture). The 4 holes in these components correspond to openings",
"e-mailed the company where I bought my kit and am awaiting their answer.",
"from those in the build guides. The question is how these components fit",
"Mini. [![Parts of the extruder](https://i.stack.imgur.com/l98L8.jpg \"Parts of the extruder\")](https://i.stack.imgur.com/l98L8.jpg \"Parts of the extruder\")",
"labeled (3), are 1 cm long and 3 mm wide. The other screws",
"Blomker industries). I also found some instructions on the net. However, my components",
"However, my components are different from those in the build guides. The question",
"The 4 holes in these components correspond to openings in the stepper motor;",
"from the left on the bottom, (labeled (2) in the picture) presumably goes",
"the right, labeled (3), are 1 cm long and 3 mm wide. The",
"to get some advice here. Apparently the usual stepper motor for a Kossel",
"(1). But nothing on how this and the other components should be put",
"in the picture). The 4 holes in these components correspond to openings in",
"I have e-mailed the company where I bought my kit and am awaiting",
"holder. My Kossel came without instructions, I was given a set of instructions",
"for the vertical carriages, were connected in a similar way to their respective",
"are 2 cm long and 3 mm wide. The stepper motor is a",
"other components should be put together for the motor holder for an extruder",
"is how these components fit together. I'm pretty certain the stepper motor should",
"procedure was needed for the motors that will move the vertical carriages. The",
"usual stepper motor for a Kossel Mini is Nema 17. Searching on \"42BYGHW811\"",
"these components correspond to openings in the stepper motor; and the stepper motors",
"17. Searching on \"42BYGHW811\" I mostly find datasheets. Using \"Nema 17 mount\" or",
"came without instructions, I was given a set of instructions by a friend",
"bottom, (labeled (2) in the picture) presumably goes on the axis of the",
"how this and the other components should be put together for the motor",
"motors that will move the vertical carriages. The screws on the right, labeled",
"are 1 cm long and 3 mm wide. The other screws are 2",
"connected in a similar way to their respective holders. The round thing, second",
"(labeled (2) in the picture) presumably goes on the axis of the stepper",
"similar procedure was needed for the motors that will move the vertical carriages.",
"the bottom, (labeled (2) in the picture) presumably goes on the axis of",
"Kossel came without instructions, I was given a set of instructions by a",
"2 cm long and 3 mm wide. The stepper motor is a Wantai",
"thing, second from the left on the bottom, (labeled (2) in the picture)",
"and I'm stuck on the extruder motor holder. My Kossel came without instructions,",
"some advice here. Apparently the usual stepper motor for a Kossel Mini is",
"I also found some instructions on the net. However, my components are different",
"\"Nema 17 mounting screws\" as search terms, I find a lot of images",
"a Kossel Mini is Nema 17. Searching on \"42BYGHW811\" I mostly find datasheets.",
"to openings in the stepper motor; and the stepper motors for the vertical",
"holders. The round thing, second from the left on the bottom, (labeled (2)"
] |
[
"I've had no luck getting useful vectors out of them. I've tried vectorizers",
"had no luck getting useful vectors out of them. I've tried vectorizers in",
"only on paper. Scanning them to bitmaps is easy, but I've had no",
"and a few online services. Generally, I end up with enormous numbers of",
"What tools and/or techniques can I use to get a more useful vector",
"I end up with enormous numbers of spurious vectors (from dust, dotted lines,",
"Scanning them to bitmaps is easy, but I've had no luck getting useful",
"a normal CAD tool without spending absurd amounts of time cleaning it all",
"to bitmaps is easy, but I've had no luck getting useful vectors out",
"up with enormous numbers of spurious vectors (from dust, dotted lines, text on",
"useful vectors out of them. I've tried vectorizers in programs like gimp, and",
"and/or techniques can I use to get a more useful vector result, that",
"online services. Generally, I end up with enormous numbers of spurious vectors (from",
"in scanning contrast, etc). What tools and/or techniques can I use to get",
"contrast, etc). What tools and/or techniques can I use to get a more",
"in a normal CAD tool without spending absurd amounts of time cleaning it",
"is easy, but I've had no luck getting useful vectors out of them.",
"diagrams only on paper. Scanning them to bitmaps is easy, but I've had",
"slightly variations in scanning contrast, etc). What tools and/or techniques can I use",
"enormous numbers of spurious vectors (from dust, dotted lines, text on the diagram,",
"of them. I've tried vectorizers in programs like gimp, and a few online",
"techniques can I use to get a more useful vector result, that I",
"more useful vector result, that I can then modify in a normal CAD",
"tried vectorizers in programs like gimp, and a few online services. Generally, I",
"dust, dotted lines, text on the diagram, slightly variations in scanning contrast, etc).",
"vector result, that I can then modify in a normal CAD tool without",
"no luck getting useful vectors out of them. I've tried vectorizers in programs",
"bitmaps is easy, but I've had no luck getting useful vectors out of",
"dotted lines, text on the diagram, slightly variations in scanning contrast, etc). What",
"luck getting useful vectors out of them. I've tried vectorizers in programs like",
"lines, text on the diagram, slightly variations in scanning contrast, etc). What tools",
"of spurious vectors (from dust, dotted lines, text on the diagram, slightly variations",
"paper. Scanning them to bitmaps is easy, but I've had no luck getting",
"to get a more useful vector result, that I can then modify in",
"few online services. Generally, I end up with enormous numbers of spurious vectors",
"that I can then modify in a normal CAD tool without spending absurd",
"vectors out of them. I've tried vectorizers in programs like gimp, and a",
"get a more useful vector result, that I can then modify in a",
"Generally, I end up with enormous numbers of spurious vectors (from dust, dotted",
"can then modify in a normal CAD tool without spending absurd amounts of",
"etc). What tools and/or techniques can I use to get a more useful",
"them to bitmaps is easy, but I've had no luck getting useful vectors",
"some design diagrams only on paper. Scanning them to bitmaps is easy, but",
"vectorizers in programs like gimp, and a few online services. Generally, I end",
"(from dust, dotted lines, text on the diagram, slightly variations in scanning contrast,",
"a few online services. Generally, I end up with enormous numbers of spurious",
"programs like gimp, and a few online services. Generally, I end up with",
"can I use to get a more useful vector result, that I can",
"the diagram, slightly variations in scanning contrast, etc). What tools and/or techniques can",
"services. Generally, I end up with enormous numbers of spurious vectors (from dust,",
"result, that I can then modify in a normal CAD tool without spending",
"I've tried vectorizers in programs like gimp, and a few online services. Generally,",
"on paper. Scanning them to bitmaps is easy, but I've had no luck",
"have some design diagrams only on paper. Scanning them to bitmaps is easy,",
"normal CAD tool without spending absurd amounts of time cleaning it all up",
"text on the diagram, slightly variations in scanning contrast, etc). What tools and/or",
"modify in a normal CAD tool without spending absurd amounts of time cleaning",
"gimp, and a few online services. Generally, I end up with enormous numbers",
"variations in scanning contrast, etc). What tools and/or techniques can I use to",
"like gimp, and a few online services. Generally, I end up with enormous",
"easy, but I've had no luck getting useful vectors out of them. I've",
"numbers of spurious vectors (from dust, dotted lines, text on the diagram, slightly",
"spurious vectors (from dust, dotted lines, text on the diagram, slightly variations in",
"on the diagram, slightly variations in scanning contrast, etc). What tools and/or techniques",
"use to get a more useful vector result, that I can then modify",
"I use to get a more useful vector result, that I can then",
"tools and/or techniques can I use to get a more useful vector result,",
"design diagrams only on paper. Scanning them to bitmaps is easy, but I've",
"end up with enormous numbers of spurious vectors (from dust, dotted lines, text",
"getting useful vectors out of them. I've tried vectorizers in programs like gimp,",
"diagram, slightly variations in scanning contrast, etc). What tools and/or techniques can I",
"a more useful vector result, that I can then modify in a normal",
"I have some design diagrams only on paper. Scanning them to bitmaps is",
"useful vector result, that I can then modify in a normal CAD tool",
"in programs like gimp, and a few online services. Generally, I end up",
"out of them. I've tried vectorizers in programs like gimp, and a few",
"but I've had no luck getting useful vectors out of them. I've tried",
"vectors (from dust, dotted lines, text on the diagram, slightly variations in scanning",
"I can then modify in a normal CAD tool without spending absurd amounts",
"then modify in a normal CAD tool without spending absurd amounts of time",
"with enormous numbers of spurious vectors (from dust, dotted lines, text on the",
"scanning contrast, etc). What tools and/or techniques can I use to get a",
"CAD tool without spending absurd amounts of time cleaning it all up first?",
"them. I've tried vectorizers in programs like gimp, and a few online services."
] |
[
"I'm building a 3D printer and I've been looking around for materials suitable",
"I don't have any metal-cutting machine tools. Can aluminium beam be cut by",
"I have occasional access to a laser cutter which I could use to",
"T-slot beam kits. I don't have any metal-cutting machine tools. Can aluminium beam",
"a hacksaw to a good degree of accuracy? How does one finish the",
"aluminium beam be cut by hand with a hacksaw to a good degree",
"a laser cutter which I could use to manufacture a ply box-type (UltiMaker)",
"frame. I have occasional access to a laser cutter which I could use",
"(UltiMaker) enclosure, but I like the ease of adjustment provided by the T-slot",
"be cut by hand with a hacksaw to a good degree of accuracy?",
"occasional access to a laser cutter which I could use to manufacture a",
"which I could use to manufacture a ply box-type (UltiMaker) enclosure, but I",
"use to manufacture a ply box-type (UltiMaker) enclosure, but I like the ease",
"I've been looking around for materials suitable to make the frame. I have",
"a 3D printer and I've been looking around for materials suitable to make",
"enclosure, but I like the ease of adjustment provided by the T-slot beam",
"kits. I don't have any metal-cutting machine tools. Can aluminium beam be cut",
"I like the ease of adjustment provided by the T-slot beam kits. I",
"3D printer and I've been looking around for materials suitable to make the",
"beam be cut by hand with a hacksaw to a good degree of",
"hacksaw to a good degree of accuracy? How does one finish the cut",
"ply box-type (UltiMaker) enclosure, but I like the ease of adjustment provided by",
"with a hacksaw to a good degree of accuracy? How does one finish",
"tools. Can aluminium beam be cut by hand with a hacksaw to a",
"hand with a hacksaw to a good degree of accuracy? How does one",
"any metal-cutting machine tools. Can aluminium beam be cut by hand with a",
"for materials suitable to make the frame. I have occasional access to a",
"have occasional access to a laser cutter which I could use to manufacture",
"to a good degree of accuracy? How does one finish the cut end?",
"make the frame. I have occasional access to a laser cutter which I",
"ease of adjustment provided by the T-slot beam kits. I don't have any",
"suitable to make the frame. I have occasional access to a laser cutter",
"a ply box-type (UltiMaker) enclosure, but I like the ease of adjustment provided",
"box-type (UltiMaker) enclosure, but I like the ease of adjustment provided by the",
"access to a laser cutter which I could use to manufacture a ply",
"around for materials suitable to make the frame. I have occasional access to",
"Can aluminium beam be cut by hand with a hacksaw to a good",
"like the ease of adjustment provided by the T-slot beam kits. I don't",
"printer and I've been looking around for materials suitable to make the frame.",
"don't have any metal-cutting machine tools. Can aluminium beam be cut by hand",
"building a 3D printer and I've been looking around for materials suitable to",
"by the T-slot beam kits. I don't have any metal-cutting machine tools. Can",
"to make the frame. I have occasional access to a laser cutter which",
"materials suitable to make the frame. I have occasional access to a laser",
"beam kits. I don't have any metal-cutting machine tools. Can aluminium beam be",
"could use to manufacture a ply box-type (UltiMaker) enclosure, but I like the",
"cut by hand with a hacksaw to a good degree of accuracy? How",
"cutter which I could use to manufacture a ply box-type (UltiMaker) enclosure, but",
"and I've been looking around for materials suitable to make the frame. I",
"adjustment provided by the T-slot beam kits. I don't have any metal-cutting machine",
"the ease of adjustment provided by the T-slot beam kits. I don't have",
"of adjustment provided by the T-slot beam kits. I don't have any metal-cutting",
"but I like the ease of adjustment provided by the T-slot beam kits.",
"by hand with a hacksaw to a good degree of accuracy? How does",
"laser cutter which I could use to manufacture a ply box-type (UltiMaker) enclosure,",
"the frame. I have occasional access to a laser cutter which I could",
"machine tools. Can aluminium beam be cut by hand with a hacksaw to",
"manufacture a ply box-type (UltiMaker) enclosure, but I like the ease of adjustment",
"provided by the T-slot beam kits. I don't have any metal-cutting machine tools.",
"the T-slot beam kits. I don't have any metal-cutting machine tools. Can aluminium",
"metal-cutting machine tools. Can aluminium beam be cut by hand with a hacksaw",
"been looking around for materials suitable to make the frame. I have occasional",
"I could use to manufacture a ply box-type (UltiMaker) enclosure, but I like",
"to manufacture a ply box-type (UltiMaker) enclosure, but I like the ease of",
"to a laser cutter which I could use to manufacture a ply box-type",
"have any metal-cutting machine tools. Can aluminium beam be cut by hand with",
"looking around for materials suitable to make the frame. I have occasional access"
] |
[
"dirt. Is it worthwhile to protect a circuit board with a 3d printed",
"case can protect the main board from dirt. Is it worthwhile to protect",
"PLA is flammable, but a good case can protect the main board from",
"board from dirt. Is it worthwhile to protect a circuit board with a",
"flammable, but a good case can protect the main board from dirt. Is",
"from dirt. Is it worthwhile to protect a circuit board with a 3d",
"protect the main board from dirt. Is it worthwhile to protect a circuit",
"a good case can protect the main board from dirt. Is it worthwhile",
"main board from dirt. Is it worthwhile to protect a circuit board with",
"Is it worthwhile to protect a circuit board with a 3d printed case?",
"can protect the main board from dirt. Is it worthwhile to protect a",
"the main board from dirt. Is it worthwhile to protect a circuit board",
"is flammable, but a good case can protect the main board from dirt.",
"but a good case can protect the main board from dirt. Is it",
"good case can protect the main board from dirt. Is it worthwhile to"
] |
[
"drag? What other variables can I expect to look out for? *Machine:* **MakerBot",
"eat away at the side of the filament. I eventually assumed it was",
"allowing the drive gear to continue \"trying\". My solution was to hang my",
"extruding for one reason or another and the drive gear would slowly eat",
"filament guides feeding from the back of the machine up through the top.",
"and the drive gear would slowly eat away at the side of the",
"the top. Question -------- Can the plastic filament guides really cause that much",
"of the machine up through the top. Question -------- Can the plastic filament",
"another and the drive gear would slowly eat away at the side of",
"the plastic filament guides causing unnecessary tension that the drive gear couldn't compete",
"guides causing unnecessary tension that the drive gear couldn't compete with, ultimately keeping",
"other variables can I expect to look out for? *Machine:* **MakerBot Replicator Dual",
"My solution was to hang my spools above the machine to avoid using",
"couldn't compete with, ultimately keeping the filament from moving forward. Thusly, allowing the",
"moving forward. Thusly, allowing the drive gear to continue \"trying\". My solution was",
"in the past with my drive gear \"eating\" my filament. It seemed that",
"the back of the machine up through the top. Question -------- Can the",
"Question -------- Can the plastic filament guides really cause that much drag? What",
"\"eating\" my filament. It seemed that the filament quit extruding for one reason",
"past with my drive gear \"eating\" my filament. It seemed that the filament",
"Backstory --------- I've had issues in the past with my drive gear \"eating\"",
"filament from moving forward. Thusly, allowing the drive gear to continue \"trying\". My",
"guides really cause that much drag? What other variables can I expect to",
"I eventually assumed it was the plastic filament guides causing unnecessary tension that",
"drive gear couldn't compete with, ultimately keeping the filament from moving forward. Thusly,",
"compete with, ultimately keeping the filament from moving forward. Thusly, allowing the drive",
"-------- Can the plastic filament guides really cause that much drag? What other",
"the plastic filament guides really cause that much drag? What other variables can",
"gear \"eating\" my filament. It seemed that the filament quit extruding for one",
"forward. Thusly, allowing the drive gear to continue \"trying\". My solution was to",
"top. Question -------- Can the plastic filament guides really cause that much drag?",
"really cause that much drag? What other variables can I expect to look",
"one reason or another and the drive gear would slowly eat away at",
"had issues in the past with my drive gear \"eating\" my filament. It",
"the side of the filament. I eventually assumed it was the plastic filament",
"side of the filament. I eventually assumed it was the plastic filament guides",
"reason or another and the drive gear would slowly eat away at the",
"ultimately keeping the filament from moving forward. Thusly, allowing the drive gear to",
"Can the plastic filament guides really cause that much drag? What other variables",
"spools above the machine to avoid using the filament guides feeding from the",
"plastic filament guides causing unnecessary tension that the drive gear couldn't compete with,",
"I've had issues in the past with my drive gear \"eating\" my filament.",
"gear would slowly eat away at the side of the filament. I eventually",
"filament guides really cause that much drag? What other variables can I expect",
"to continue \"trying\". My solution was to hang my spools above the machine",
"machine to avoid using the filament guides feeding from the back of the",
"my drive gear \"eating\" my filament. It seemed that the filament quit extruding",
"filament. I eventually assumed it was the plastic filament guides causing unnecessary tension",
"variables can I expect to look out for? *Machine:* **MakerBot Replicator Dual (1st",
"to avoid using the filament guides feeding from the back of the machine",
"plastic filament guides really cause that much drag? What other variables can I",
"issues in the past with my drive gear \"eating\" my filament. It seemed",
"the drive gear to continue \"trying\". My solution was to hang my spools",
"slowly eat away at the side of the filament. I eventually assumed it",
"up through the top. Question -------- Can the plastic filament guides really cause",
"continue \"trying\". My solution was to hang my spools above the machine to",
"tension that the drive gear couldn't compete with, ultimately keeping the filament from",
"Thusly, allowing the drive gear to continue \"trying\". My solution was to hang",
"the past with my drive gear \"eating\" my filament. It seemed that the",
"the drive gear would slowly eat away at the side of the filament.",
"away at the side of the filament. I eventually assumed it was the",
"cause that much drag? What other variables can I expect to look out",
"machine up through the top. Question -------- Can the plastic filament guides really",
"unnecessary tension that the drive gear couldn't compete with, ultimately keeping the filament",
"\"trying\". My solution was to hang my spools above the machine to avoid",
"the filament quit extruding for one reason or another and the drive gear",
"using the filament guides feeding from the back of the machine up through",
"or another and the drive gear would slowly eat away at the side",
"filament guides causing unnecessary tension that the drive gear couldn't compete with, ultimately",
"with, ultimately keeping the filament from moving forward. Thusly, allowing the drive gear",
"my spools above the machine to avoid using the filament guides feeding from",
"seemed that the filament quit extruding for one reason or another and the",
"drive gear would slowly eat away at the side of the filament. I",
"to hang my spools above the machine to avoid using the filament guides",
"through the top. Question -------- Can the plastic filament guides really cause that",
"from the back of the machine up through the top. Question -------- Can",
"It seemed that the filament quit extruding for one reason or another and",
"that the filament quit extruding for one reason or another and the drive",
"guides feeding from the back of the machine up through the top. Question",
"avoid using the filament guides feeding from the back of the machine up",
"the filament. I eventually assumed it was the plastic filament guides causing unnecessary",
"can I expect to look out for? *Machine:* **MakerBot Replicator Dual (1st Generation)**",
"the filament guides feeding from the back of the machine up through the",
"that much drag? What other variables can I expect to look out for?",
"What other variables can I expect to look out for? *Machine:* **MakerBot Replicator",
"hang my spools above the machine to avoid using the filament guides feeding",
"eventually assumed it was the plastic filament guides causing unnecessary tension that the",
"was to hang my spools above the machine to avoid using the filament",
"much drag? What other variables can I expect to look out for? *Machine:*",
"was the plastic filament guides causing unnecessary tension that the drive gear couldn't",
"that the drive gear couldn't compete with, ultimately keeping the filament from moving",
"my filament. It seemed that the filament quit extruding for one reason or",
"the machine up through the top. Question -------- Can the plastic filament guides",
"drive gear \"eating\" my filament. It seemed that the filament quit extruding for",
"quit extruding for one reason or another and the drive gear would slowly",
"the machine to avoid using the filament guides feeding from the back of",
"from moving forward. Thusly, allowing the drive gear to continue \"trying\". My solution",
"gear to continue \"trying\". My solution was to hang my spools above the",
"keeping the filament from moving forward. Thusly, allowing the drive gear to continue",
"--------- I've had issues in the past with my drive gear \"eating\" my",
"gear couldn't compete with, ultimately keeping the filament from moving forward. Thusly, allowing",
"filament. It seemed that the filament quit extruding for one reason or another",
"feeding from the back of the machine up through the top. Question --------",
"it was the plastic filament guides causing unnecessary tension that the drive gear",
"drive gear to continue \"trying\". My solution was to hang my spools above",
"would slowly eat away at the side of the filament. I eventually assumed",
"the drive gear couldn't compete with, ultimately keeping the filament from moving forward.",
"filament quit extruding for one reason or another and the drive gear would",
"back of the machine up through the top. Question -------- Can the plastic",
"above the machine to avoid using the filament guides feeding from the back",
"with my drive gear \"eating\" my filament. It seemed that the filament quit",
"assumed it was the plastic filament guides causing unnecessary tension that the drive",
"of the filament. I eventually assumed it was the plastic filament guides causing",
"at the side of the filament. I eventually assumed it was the plastic",
"for one reason or another and the drive gear would slowly eat away",
"solution was to hang my spools above the machine to avoid using the",
"the filament from moving forward. Thusly, allowing the drive gear to continue \"trying\".",
"causing unnecessary tension that the drive gear couldn't compete with, ultimately keeping the"
] |
[
"other two directions, because it relies on the cohesion between the layers. [](https://i.stack.imgur.com/7vqSam.jpg) As you can see, one of the clips that's meant to",
"scale it up to an array of many holders.) This means that it's",
"for supports. (This will be more important later, when I scale it up",
"update, here's what it looks like using John Biddle's suggestion, which works perfectly:",
"glass vials, for a scientific application. The photo below shows the latest design",
"between the layers. [](https://i.stack.imgur.com/aOyctm.jpg) My question is whether I can",
"trying to design a holder for glass vials, for a scientific application. The",
"meant to hold the vial in place has broken off. This happened after",
"design a holder for glass vials, for a scientific application. The photo below",
"without abandoning my hope of support-free printing. I don't care at all what",
"keeping the vial vertical. The ones shown are the thickest I've tried -",
"weaker than in the other two directions, because it relies on the cohesion",
"for this. It's because I'm printing in the orientation shown below, in order",
"design iteration, and also shows the problem with it: [](https://i.stack.imgur.com/7vqSam.jpg) As you",
"more important later, when I scale it up to an array of many",
"bit floppy and aren't very good at keeping the vial vertical. The ones",
"at all. (The vial is supposed to be inserted from the front rather",
"looks like, except that as much of the vial as possible needs to",
"very good at keeping the vial vertical. The ones shown are the thickest",
"the clips that's meant to hold the vial in place has broken off.",
"I can do anything about this by changing the design of the clips,",
"ones shown are the thickest I've tried - I'm afraid that if they're",
"the strength in the z dimension, which is much weaker than in the",
"place has broken off. This happened after inserting the vial once or twice.",
"is whether I can do anything about this by changing the design of",
"can do anything about this by changing the design of the clips, without",
"of many holders.) This means that it's relying on the strength in the",
"hope of support-free printing. I don't care at all what the design looks",
"because I'm printing in the orientation shown below, in order to avoid the",
"shown below, in order to avoid the need for supports. (This will be",
"the vial as possible needs to be visible from the front. I'm printing",
"I think I understand the reason for this. It's because I'm printing in",
"with it: [](https://i.stack.imgur.com/7vqSam.jpg) As you can see, one of the clips that's",
"- I'm afraid that if they're too thick they won't bend at all.",
"thickest I've tried - I'm afraid that if they're too thick they won't",
"shows the problem with it: [](https://i.stack.imgur.com/7vqSam.jpg) As you can see, one of",
"I've tried - I'm afraid that if they're too thick they won't bend",
"vial as possible needs to be visible from the front. I'm printing in",
"application. The photo below shows the latest design iteration, and also shows the",
"As my first project, I'm trying to design a holder for glass vials,",
"to design a holder for glass vials, for a scientific application. The photo",
"my hope of support-free printing. I don't care at all what the design",
"the top.) **Edit** just as an update, here's what it looks like using",
"shown are the thickest I've tried - I'm afraid that if they're too",
"in the orientation shown below, in order to avoid the need for supports.",
"one of the clips that's meant to hold the vial in place has",
"(This will be more important later, when I scale it up to an",
"thick they won't bend at all. (The vial is supposed to be inserted",
"I'm printing in the orientation shown below, in order to avoid the need",
"an array of many holders.) This means that it's relying on the strength",
"later, when I scale it up to an array of many holders.) This",
"that's meant to hold the vial in place has broken off. This happened",
"as an update, here's what it looks like using John Biddle's suggestion, which",
"for glass vials, for a scientific application. The photo below shows the latest",
"of the clips that's meant to hold the vial in place has broken",
"from the front rather than the top.) **Edit** just as an update, here's",
"that if they're too thick they won't bend at all. (The vial is",
"clips. Thinner ones don't break as easily, but they are a bit floppy",
"bend at all. (The vial is supposed to be inserted from the front",
"the layers. [](https://i.stack.imgur.com/aOyctm.jpg) My question is whether I can do",
"twice. I think I understand the reason for this. It's because I'm printing",
"in order to avoid the need for supports. (This will be more important",
"order to avoid the need for supports. (This will be more important later,",
"just as an update, here's what it looks like using John Biddle's suggestion,",
"don't break as easily, but they are a bit floppy and aren't very",
"it: [](https://i.stack.imgur.com/7vqSam.jpg) As you can see, one of the clips that's meant",
"of the clips. Thinner ones don't break as easily, but they are a",
"design looks like, except that as much of the vial as possible needs",
"won't bend at all. (The vial is supposed to be inserted from the",
"because it relies on the cohesion between the layers. [](https://i.stack.imgur.com/aOyctm.jpg)",
"inserted from the front rather than the top.) **Edit** just as an update,",
"be more important later, when I scale it up to an array of",
"all. (The vial is supposed to be inserted from the front rather than",
"holders.) This means that it's relying on the strength in the z dimension,",
"thickness of the clips. Thinner ones don't break as easily, but they are",
"avoid the need for supports. (This will be more important later, when I",
"the front. I'm printing in ABS. I have tried varying the thickness of",
"about this by changing the design of the clips, without abandoning my hope",
"problem with it: [](https://i.stack.imgur.com/7vqSam.jpg) As you can see, one of the clips",
"in place has broken off. This happened after inserting the vial once or",
"supposed to be inserted from the front rather than the top.) **Edit** just",
"see, one of the clips that's meant to hold the vial in place",
"vial is supposed to be inserted from the front rather than the top.)",
"in the z dimension, which is much weaker than in the other two",
"I'm afraid that if they're too thick they won't bend at all. (The",
"supports. (This will be more important later, when I scale it up to",
"think I understand the reason for this. It's because I'm printing in the",
"printing in ABS. I have tried varying the thickness of the clips. Thinner",
"the vial vertical. The ones shown are the thickest I've tried - I'm",
"As you can see, one of the clips that's meant to hold the",
"printing in the orientation shown below, in order to avoid the need for",
"image description here](https://i.stack.imgur.com/aOyctm.jpg)](https://i.stack.imgur.com/aOyctm.jpg) My question is whether I can do anything about this",
"holder](https://i.stack.imgur.com/7vqSam.jpg)](https://i.stack.imgur.com/7vqSam.jpg) As you can see, one of the clips that's meant to hold",
"that as much of the vial as possible needs to be visible from",
"the latest design iteration, and also shows the problem with it: [](https://i.stack.imgur.com/7vqSam.jpg)",
"much of the vial as possible needs to be visible from the front.",
"vertical. The ones shown are the thickest I've tried - I'm afraid that",
"inserting the vial once or twice. I think I understand the reason for",
"afraid that if they're too thick they won't bend at all. (The vial",
"anything about this by changing the design of the clips, without abandoning my",
"an update, here's what it looks like using John Biddle's suggestion, which works",
"the vial once or twice. I think I understand the reason for this.",
"vial once or twice. I think I understand the reason for this. It's",
"also shows the problem with it: [](https://i.stack.imgur.com/7vqSam.jpg) As you can see, one",
"that it's relying on the strength in the z dimension, which is much",
"latest design iteration, and also shows the problem with it: [](https://i.stack.imgur.com/7vqSam.jpg) As",
"too thick they won't bend at all. (The vial is supposed to be",
"possible needs to be visible from the front. I'm printing in ABS. I",
"important later, when I scale it up to an array of many holders.)",
"aren't very good at keeping the vial vertical. The ones shown are the",
"the thickest I've tried - I'm afraid that if they're too thick they",
"the design of the clips, without abandoning my hope of support-free printing. I",
"in ABS. I have tried varying the thickness of the clips. Thinner ones",
"project, I'm trying to design a holder for glass vials, for a scientific",
"are the thickest I've tried - I'm afraid that if they're too thick",
"My question is whether I can do anything about this by changing the",
"dimension, which is much weaker than in the other two directions, because it",
"to be visible from the front. I'm printing in ABS. I have tried",
"the clips, without abandoning my hope of support-free printing. I don't care at",
"to hold the vial in place has broken off. This happened after inserting",
"at all what the design looks like, except that as much of the",
"by changing the design of the clips, without abandoning my hope of support-free",
"floppy and aren't very good at keeping the vial vertical. The ones shown",
"at keeping the vial vertical. The ones shown are the thickest I've tried",
"The photo below shows the latest design iteration, and also shows the problem",
"or twice. I think I understand the reason for this. It's because I'm",
"strength in the z dimension, which is much weaker than in the other",
"The ones shown are the thickest I've tried - I'm afraid that if",
"first project, I'm trying to design a holder for glass vials, for a",
"except that as much of the vial as possible needs to be visible",
"do anything about this by changing the design of the clips, without abandoning",
"varying the thickness of the clips. Thinner ones don't break as easily, but",
"much weaker than in the other two directions, because it relies on the",
"in the other two directions, because it relies on the cohesion between the",
"I don't care at all what the design looks like, except that as",
"layers. [](https://i.stack.imgur.com/aOyctm.jpg) My question is whether I can do anything",
"looks like using John Biddle's suggestion, which works perfectly: [](https://i.stack.imgur.com/w3qeG.png)",
"relies on the cohesion between the layers. [](https://i.stack.imgur.com/aOyctm.jpg) My question",
"a bit floppy and aren't very good at keeping the vial vertical. The",
"they won't bend at all. (The vial is supposed to be inserted from",
"are a bit floppy and aren't very good at keeping the vial vertical.",
"broken off. This happened after inserting the vial once or twice. I think",
"of the vial as possible needs to be visible from the front. I'm",
"holder for glass vials, for a scientific application. The photo below shows the",
"it looks like using John Biddle's suggestion, which works perfectly: [](https://i.stack.imgur.com/aOyctm.jpg) My question is whether I can do anything about",
"visible from the front. I'm printing in ABS. I have tried varying the",
"for a scientific application. The photo below shows the latest design iteration, and",
"break as easily, but they are a bit floppy and aren't very good",
"(The vial is supposed to be inserted from the front rather than the",
"than in the other two directions, because it relies on the cohesion between",
"needs to be visible from the front. I'm printing in ABS. I have",
"front rather than the top.) **Edit** just as an update, here's what it",
"to an array of many holders.) This means that it's relying on the",
"can see, one of the clips that's meant to hold the vial in",
"the other two directions, because it relies on the cohesion between the layers.",
"the thickness of the clips. Thinner ones don't break as easily, but they",
"is much weaker than in the other two directions, because it relies on",
"array of many holders.) This means that it's relying on the strength in",
"description here](https://i.stack.imgur.com/aOyctm.jpg)](https://i.stack.imgur.com/aOyctm.jpg) My question is whether I can do anything about this by",
"shows the latest design iteration, and also shows the problem with it: [](https://i.stack.imgur.com/aOyctm.jpg) My question is whether",
"directions, because it relies on the cohesion between the layers. [](https://i.stack.imgur.com/7vqSam.jpg) As you can see,",
"**Edit** just as an update, here's what it looks like using John Biddle's",
"scientific application. The photo below shows the latest design iteration, and also shows",
"it relies on the cohesion between the layers. [](https://i.stack.imgur.com/aOyctm.jpg) My",
"tried varying the thickness of the clips. Thinner ones don't break as easily,",
"it up to an array of many holders.) This means that it's relying",
"reason for this. It's because I'm printing in the orientation shown below, in",
"abandoning my hope of support-free printing. I don't care at all what the",
"than the top.) **Edit** just as an update, here's what it looks like",
"once or twice. I think I understand the reason for this. It's because",
"photo below shows the latest design iteration, and also shows the problem with",
"here](https://i.stack.imgur.com/aOyctm.jpg)](https://i.stack.imgur.com/aOyctm.jpg) My question is whether I can do anything about this by changing",
"don't care at all what the design looks like, except that as much",
"be inserted from the front rather than the top.) **Edit** just as an",
"my first project, I'm trying to design a holder for glass vials, for",
"below shows the latest design iteration, and also shows the problem with it:",
"up to an array of many holders.) This means that it's relying on",
"the orientation shown below, in order to avoid the need for supports. (This",
"the need for supports. (This will be more important later, when I scale",
"but they are a bit floppy and aren't very good at keeping the",
"the clips. Thinner ones don't break as easily, but they are a bit",
"the problem with it: [](https://i.stack.imgur.com/7vqSam.jpg) As you can see, one of the",
"here's what it looks like using John Biddle's suggestion, which works perfectly: [](https://i.stack.imgur.com/aOyctm.jpg) My question is",
"what the design looks like, except that as much of the vial as",
"of the clips, without abandoning my hope of support-free printing. I don't care",
"ones don't break as easily, but they are a bit floppy and aren't",
"and aren't very good at keeping the vial vertical. The ones shown are",
"means that it's relying on the strength in the z dimension, which is",
"of support-free printing. I don't care at all what the design looks like,",
"vial in place has broken off. This happened after inserting the vial once",
"after inserting the vial once or twice. I think I understand the reason",
"it's relying on the strength in the z dimension, which is much weaker",
"I understand the reason for this. It's because I'm printing in the orientation",
"a holder for glass vials, for a scientific application. The photo below shows",
"support-free printing. I don't care at all what the design looks like, except",
"whether I can do anything about this by changing the design of the",
"iteration, and also shows the problem with it: [](https://i.stack.imgur.com/7vqSam.jpg) As you can",
"they're too thick they won't bend at all. (The vial is supposed to",
"hold the vial in place has broken off. This happened after inserting the",
"understand the reason for this. It's because I'm printing in the orientation shown",
"off. This happened after inserting the vial once or twice. I think I",
"cohesion between the layers. [](https://i.stack.imgur.com/aOyctm.jpg) My question is whether I",
"will be more important later, when I scale it up to an array",
"good at keeping the vial vertical. The ones shown are the thickest I've",
"vial vertical. The ones shown are the thickest I've tried - I'm afraid",
"this by changing the design of the clips, without abandoning my hope of",
"from the front. I'm printing in ABS. I have tried varying the thickness",
"as much of the vial as possible needs to be visible from the",
"care at all what the design looks like, except that as much of"
] |
[
"filament that will be soft to stand on: <http://recreus.com/en/> I do not currently",
"a printer. How can I measure her feet and transfer the measurements to",
"feet and transfer the measurements to the printer? (one of these comes to",
"insoles for my wife. This company makes a flexible filament that will be",
"the inside of the shoe? What kind of printer can print with the",
"flexible filament that will be soft to stand on: <http://recreus.com/en/> I do not",
"that will be soft to stand on: <http://recreus.com/en/> I do not currently own",
"for my wife. This company makes a flexible filament that will be soft",
"I do not currently own a printer. How can I measure her feet",
"not currently own a printer. How can I measure her feet and transfer",
"company makes a flexible filament that will be soft to stand on: <http://recreus.com/en/>",
"inside of the shoe? What kind of printer can print with the flexible",
"<http://recreus.com/en/> I do not currently own a printer. How can I measure her",
"can I measure the inside of the shoe? What kind of printer can",
"and transfer the measurements to the printer? (one of these comes to mind:",
"her feet and transfer the measurements to the printer? (one of these comes",
"on: <http://recreus.com/en/> I do not currently own a printer. How can I measure",
"of these comes to mind: <http://www.eggheadtoys.com/pin-art/>) How can I measure the inside of",
"make custom insoles for my wife. This company makes a flexible filament that",
"to stand on: <http://recreus.com/en/> I do not currently own a printer. How can",
"do not currently own a printer. How can I measure her feet and",
"can I measure her feet and transfer the measurements to the printer? (one",
"I would like to make custom insoles for my wife. This company makes",
"will be soft to stand on: <http://recreus.com/en/> I do not currently own a",
"wife. This company makes a flexible filament that will be soft to stand",
"This company makes a flexible filament that will be soft to stand on:",
"stand on: <http://recreus.com/en/> I do not currently own a printer. How can I",
"mind: <http://www.eggheadtoys.com/pin-art/>) How can I measure the inside of the shoe? What kind",
"<http://www.eggheadtoys.com/pin-art/>) How can I measure the inside of the shoe? What kind of",
"to make custom insoles for my wife. This company makes a flexible filament",
"own a printer. How can I measure her feet and transfer the measurements",
"to mind: <http://www.eggheadtoys.com/pin-art/>) How can I measure the inside of the shoe? What",
"the printer? (one of these comes to mind: <http://www.eggheadtoys.com/pin-art/>) How can I measure",
"the measurements to the printer? (one of these comes to mind: <http://www.eggheadtoys.com/pin-art/>) How",
"these comes to mind: <http://www.eggheadtoys.com/pin-art/>) How can I measure the inside of the",
"currently own a printer. How can I measure her feet and transfer the",
"I measure the inside of the shoe? What kind of printer can print",
"comes to mind: <http://www.eggheadtoys.com/pin-art/>) How can I measure the inside of the shoe?",
"would like to make custom insoles for my wife. This company makes a",
"How can I measure her feet and transfer the measurements to the printer?",
"(one of these comes to mind: <http://www.eggheadtoys.com/pin-art/>) How can I measure the inside",
"like to make custom insoles for my wife. This company makes a flexible",
"I measure her feet and transfer the measurements to the printer? (one of",
"measurements to the printer? (one of these comes to mind: <http://www.eggheadtoys.com/pin-art/>) How can",
"printer. How can I measure her feet and transfer the measurements to the",
"makes a flexible filament that will be soft to stand on: <http://recreus.com/en/> I",
"my wife. This company makes a flexible filament that will be soft to",
"How can I measure the inside of the shoe? What kind of printer",
"of the shoe? What kind of printer can print with the flexible filament?",
"soft to stand on: <http://recreus.com/en/> I do not currently own a printer. How",
"measure the inside of the shoe? What kind of printer can print with",
"be soft to stand on: <http://recreus.com/en/> I do not currently own a printer.",
"printer? (one of these comes to mind: <http://www.eggheadtoys.com/pin-art/>) How can I measure the",
"transfer the measurements to the printer? (one of these comes to mind: <http://www.eggheadtoys.com/pin-art/>)",
"a flexible filament that will be soft to stand on: <http://recreus.com/en/> I do",
"measure her feet and transfer the measurements to the printer? (one of these",
"custom insoles for my wife. This company makes a flexible filament that will",
"to the printer? (one of these comes to mind: <http://www.eggheadtoys.com/pin-art/>) How can I"
] |
[
"6mm high) which i would need to mount the E3D V6 clone I",
"mount it to the horizontally moving x-y drives. As I cannot print yet,",
"Are there some completely different ideas around which I didn't think of yet?",
"the DVD drive but a) there is almost no space for that, and",
"print yet, it needs to be manufacturable at home. I thought of something",
"loss with the hotend mount. I cannot drill holes of 16 (upper diameter)",
"a) there is almost no space for that, and b) I'm pretty sure",
"16mm hole on top. Not to say that I don't own a drillbit",
"I cannot drill holes of 16 (upper diameter) and 12 mm (clamping diameter,",
"thin enough to fit the 6mm gap for the hotend, would not really",
"really be able to put any screws through it along the flat axis.",
"with the hotend mount. I cannot drill holes of 16 (upper diameter) and",
"some completely different ideas around which I didn't think of yet? Additional info:",
"printer I am at a loss with the hotend mount. I cannot drill",
"cannot print yet, it needs to be manufacturable at home. I thought of",
"able to put any screws through it along the flat axis. also I",
"and 12 mm (clamping diameter, 6mm high) which i would need to mount",
"I'm pretty sure I will burn the DVD drive's motor somewhere along the",
"the hotend while having some holes for screws to mount it to the",
"that, and b) I'm pretty sure I will burn the DVD drive's motor",
"diameter) and 12 mm (clamping diameter, 6mm high) which i would need to",
"to mount it to the horizontally moving x-y drives. As I cannot print",
"b) I'm pretty sure I will burn the DVD drive's motor somewhere along",
"so I don't want to put too much work in the individual DVD",
"for that, and b) I'm pretty sure I will burn the DVD drive's",
"which i would need to mount the E3D V6 clone I have. What",
"mount plate that tightly fixes the hotend while having some holes for screws",
"own a drillbit of 16mm diameter... Are there some completely different ideas around",
"different ideas around which I didn't think of yet? Additional info: the x-y",
"a piece of wood thin enough to fit the 6mm gap for the",
"the horizontally moving x-y drives. As I cannot print yet, it needs to",
"holes of 16 (upper diameter) and 12 mm (clamping diameter, 6mm high) which",
"am looking for: a hotend mount plate that tightly fixes the hotend while",
"piece of wood thin enough to fit the 6mm gap for the hotend,",
"drives. As I cannot print yet, it needs to be manufacturable at home.",
"directly to the DVD drive but a) there is almost no space for",
"glue the layer with a 16mm hole on top. Not to say that",
"drive's motor somewhere along the way, so I don't want to put too",
"underneath mounted dvd drive laser positioner. Ideally, I'd want to mount the hotend",
"6mm gap for the hotend, would not really be able to put any",
"want to mount the hotend directly to the DVD drive but a) there",
"clone I have. What I am looking for: a hotend mount plate that",
"will burn the DVD drive's motor somewhere along the way, so I don't",
"fit the 6mm gap for the hotend, would not really be able to",
"(clamping diameter, 6mm high) which i would need to mount the E3D V6",
"am at a loss with the hotend mount. I cannot drill holes of",
"home. I thought of something like this: <http://www.thingiverse.com/thing:285405> I could get a piece",
"drive but a) there is almost no space for that, and b) I'm",
"the way, so I don't want to put too much work in the",
"I cannot print yet, it needs to be manufacturable at home. I thought",
"DVD drive but a) there is almost no space for that, and b)",
"not really be able to put any screws through it along the flat",
"the E3D V6 clone I have. What I am looking for: a hotend",
"the layer with a 16mm hole on top. Not to say that I",
"at home. I thought of something like this: <http://www.thingiverse.com/thing:285405> I could get a",
"which I didn't think of yet? Additional info: the x-y axes are made",
"the x-y axes are made from a scanner bed and an underneath mounted",
"mounted dvd drive laser positioner. Ideally, I'd want to mount the hotend directly",
"from a scanner bed and an underneath mounted dvd drive laser positioner. Ideally,",
"of something like this: <http://www.thingiverse.com/thing:285405> I could get a piece of wood thin",
"my Fzazkanstuuf's printer I am at a loss with the hotend mount. I",
"way, so I don't want to put too much work in the individual",
"an underneath mounted dvd drive laser positioner. Ideally, I'd want to mount the",
"be manufacturable at home. I thought of something like this: <http://www.thingiverse.com/thing:285405> I could",
"thought of something like this: <http://www.thingiverse.com/thing:285405> I could get a piece of wood",
"would not really be able to put any screws through it along the",
"don't own a drillbit of 16mm diameter... Are there some completely different ideas",
"almost no space for that, and b) I'm pretty sure I will burn",
"moving x-y drives. As I cannot print yet, it needs to be manufacturable",
"E3D V6 clone I have. What I am looking for: a hotend mount",
"I don't want to put too much work in the individual DVD drive.",
"but a) there is almost no space for that, and b) I'm pretty",
"layer with a 16mm hole on top. Not to say that I don't",
"yet, it needs to be manufacturable at home. I thought of something like",
"is almost no space for that, and b) I'm pretty sure I will",
"to glue the layer with a 16mm hole on top. Not to say",
"a 16mm hole on top. Not to say that I don't own a",
"of yet? Additional info: the x-y axes are made from a scanner bed",
"hotend while having some holes for screws to mount it to the horizontally",
"holes for screws to mount it to the horizontally moving x-y drives. As",
"sure I will burn the DVD drive's motor somewhere along the way, so",
"I could get a piece of wood thin enough to fit the 6mm",
"16 (upper diameter) and 12 mm (clamping diameter, 6mm high) which i would",
"I would have to glue the layer with a 16mm hole on top.",
"for the hotend, would not really be able to put any screws through",
"to fit the 6mm gap for the hotend, would not really be able",
"to say that I don't own a drillbit of 16mm diameter... Are there",
"DVD drive's motor somewhere along the way, so I don't want to put",
"pretty sure I will burn the DVD drive's motor somewhere along the way,",
"to be manufacturable at home. I thought of something like this: <http://www.thingiverse.com/thing:285405> I",
"top. Not to say that I don't own a drillbit of 16mm diameter...",
"to the DVD drive but a) there is almost no space for that,",
"motor somewhere along the way, so I don't want to put too much",
"it needs to be manufacturable at home. I thought of something like this:",
"mount the hotend directly to the DVD drive but a) there is almost",
"I am looking for: a hotend mount plate that tightly fixes the hotend",
"dvd drive laser positioner. Ideally, I'd want to mount the hotend directly to",
"there some completely different ideas around which I didn't think of yet? Additional",
"hotend directly to the DVD drive but a) there is almost no space",
"ideas around which I didn't think of yet? Additional info: the x-y axes",
"of 16 (upper diameter) and 12 mm (clamping diameter, 6mm high) which i",
"diameter, 6mm high) which i would need to mount the E3D V6 clone",
"of 16mm diameter... Are there some completely different ideas around which I didn't",
"I will burn the DVD drive's motor somewhere along the way, so I",
"looking for: a hotend mount plate that tightly fixes the hotend while having",
"the flat axis. also I would have to glue the layer with a",
"have to glue the layer with a 16mm hole on top. Not to",
"to mount the E3D V6 clone I have. What I am looking for:",
"get a piece of wood thin enough to fit the 6mm gap for",
"drillbit of 16mm diameter... Are there some completely different ideas around which I",
"diameter... Are there some completely different ideas around which I didn't think of",
"bed and an underneath mounted dvd drive laser positioner. Ideally, I'd want to",
"Not to say that I don't own a drillbit of 16mm diameter... Are",
"V6 clone I have. What I am looking for: a hotend mount plate",
"to the horizontally moving x-y drives. As I cannot print yet, it needs",
"would need to mount the E3D V6 clone I have. What I am",
"cannot drill holes of 16 (upper diameter) and 12 mm (clamping diameter, 6mm",
"12 mm (clamping diameter, 6mm high) which i would need to mount the",
"hole on top. Not to say that I don't own a drillbit of",
"wood thin enough to fit the 6mm gap for the hotend, would not",
"drill holes of 16 (upper diameter) and 12 mm (clamping diameter, 6mm high)",
"i would need to mount the E3D V6 clone I have. What I",
"As I cannot print yet, it needs to be manufacturable at home. I",
"on top. Not to say that I don't own a drillbit of 16mm",
"the hotend, would not really be able to put any screws through it",
"(upper diameter) and 12 mm (clamping diameter, 6mm high) which i would need",
"x-y axes are made from a scanner bed and an underneath mounted dvd",
"and an underneath mounted dvd drive laser positioner. Ideally, I'd want to mount",
"hotend mount. I cannot drill holes of 16 (upper diameter) and 12 mm",
"a hotend mount plate that tightly fixes the hotend while having some holes",
"a drillbit of 16mm diameter... Are there some completely different ideas around which",
"no space for that, and b) I'm pretty sure I will burn the",
"axes are made from a scanner bed and an underneath mounted dvd drive",
"mount. I cannot drill holes of 16 (upper diameter) and 12 mm (clamping",
"could get a piece of wood thin enough to fit the 6mm gap",
"along the way, so I don't want to put too much work in",
"gap for the hotend, would not really be able to put any screws",
"screws through it along the flat axis. also I would have to glue",
"also I would have to glue the layer with a 16mm hole on",
"space for that, and b) I'm pretty sure I will burn the DVD",
"yet? Additional info: the x-y axes are made from a scanner bed and",
"some holes for screws to mount it to the horizontally moving x-y drives.",
"16mm diameter... Are there some completely different ideas around which I didn't think",
"high) which i would need to mount the E3D V6 clone I have.",
"tightly fixes the hotend while having some holes for screws to mount it",
"scanner bed and an underneath mounted dvd drive laser positioner. Ideally, I'd want",
"made from a scanner bed and an underneath mounted dvd drive laser positioner.",
"horizontally moving x-y drives. As I cannot print yet, it needs to be",
"it along the flat axis. also I would have to glue the layer",
"Additional info: the x-y axes are made from a scanner bed and an",
"the 6mm gap for the hotend, would not really be able to put",
"laser positioner. Ideally, I'd want to mount the hotend directly to the DVD",
"I have. What I am looking for: a hotend mount plate that tightly",
"I thought of something like this: <http://www.thingiverse.com/thing:285405> I could get a piece of",
"having some holes for screws to mount it to the horizontally moving x-y",
"for screws to mount it to the horizontally moving x-y drives. As I",
"flat axis. also I would have to glue the layer with a 16mm",
"axis. also I would have to glue the layer with a 16mm hole",
"say that I don't own a drillbit of 16mm diameter... Are there some",
"I didn't think of yet? Additional info: the x-y axes are made from",
"that I don't own a drillbit of 16mm diameter... Are there some completely",
"burn the DVD drive's motor somewhere along the way, so I don't want",
"<http://www.thingiverse.com/thing:285405> I could get a piece of wood thin enough to fit the",
"Fzazkanstuuf's printer I am at a loss with the hotend mount. I cannot",
"enough to fit the 6mm gap for the hotend, would not really be",
"fixes the hotend while having some holes for screws to mount it to",
"think of yet? Additional info: the x-y axes are made from a scanner",
"the DVD drive's motor somewhere along the way, so I don't want to",
"that tightly fixes the hotend while having some holes for screws to mount",
"x-y drives. As I cannot print yet, it needs to be manufacturable at",
"For my Fzazkanstuuf's printer I am at a loss with the hotend mount.",
"would have to glue the layer with a 16mm hole on top. Not",
"didn't think of yet? Additional info: the x-y axes are made from a",
"with a 16mm hole on top. Not to say that I don't own",
"of wood thin enough to fit the 6mm gap for the hotend, would",
"through it along the flat axis. also I would have to glue the",
"needs to be manufacturable at home. I thought of something like this: <http://www.thingiverse.com/thing:285405>",
"info: the x-y axes are made from a scanner bed and an underneath",
"drive laser positioner. Ideally, I'd want to mount the hotend directly to the",
"What I am looking for: a hotend mount plate that tightly fixes the",
"I don't own a drillbit of 16mm diameter... Are there some completely different",
"mm (clamping diameter, 6mm high) which i would need to mount the E3D",
"have. What I am looking for: a hotend mount plate that tightly fixes",
"Ideally, I'd want to mount the hotend directly to the DVD drive but",
"I'd want to mount the hotend directly to the DVD drive but a)",
"manufacturable at home. I thought of something like this: <http://www.thingiverse.com/thing:285405> I could get",
"the hotend mount. I cannot drill holes of 16 (upper diameter) and 12",
"at a loss with the hotend mount. I cannot drill holes of 16",
"put any screws through it along the flat axis. also I would have",
"a scanner bed and an underneath mounted dvd drive laser positioner. Ideally, I'd",
"the hotend directly to the DVD drive but a) there is almost no",
"and b) I'm pretty sure I will burn the DVD drive's motor somewhere",
"I am at a loss with the hotend mount. I cannot drill holes",
"around which I didn't think of yet? Additional info: the x-y axes are",
"something like this: <http://www.thingiverse.com/thing:285405> I could get a piece of wood thin enough",
"plate that tightly fixes the hotend while having some holes for screws to",
"completely different ideas around which I didn't think of yet? Additional info: the",
"somewhere along the way, so I don't want to put too much work",
"along the flat axis. also I would have to glue the layer with",
"there is almost no space for that, and b) I'm pretty sure I",
"be able to put any screws through it along the flat axis. also",
"it to the horizontally moving x-y drives. As I cannot print yet, it",
"hotend mount plate that tightly fixes the hotend while having some holes for",
"are made from a scanner bed and an underneath mounted dvd drive laser",
"to mount the hotend directly to the DVD drive but a) there is",
"while having some holes for screws to mount it to the horizontally moving",
"like this: <http://www.thingiverse.com/thing:285405> I could get a piece of wood thin enough to",
"need to mount the E3D V6 clone I have. What I am looking",
"to put any screws through it along the flat axis. also I would",
"screws to mount it to the horizontally moving x-y drives. As I cannot",
"hotend, would not really be able to put any screws through it along",
"any screws through it along the flat axis. also I would have to",
"positioner. Ideally, I'd want to mount the hotend directly to the DVD drive",
"this: <http://www.thingiverse.com/thing:285405> I could get a piece of wood thin enough to fit",
"mount the E3D V6 clone I have. What I am looking for: a",
"a loss with the hotend mount. I cannot drill holes of 16 (upper",
"for: a hotend mount plate that tightly fixes the hotend while having some"
] |
[
"saved money on buying the printer, buying models and then printing the models,",
"buying models and then printing the models, compared to buying something alike in",
"have a 3D printer, would you say that you have saved money on",
"models, compared to buying something alike in retail? Would you say that saving",
"a 3D printer, would you say that you have saved money on buying",
"models and then printing the models, compared to buying something alike in retail?",
"on buying the printer, buying models and then printing the models, compared to",
"and then printing the models, compared to buying something alike in retail? Would",
"you have saved money on buying the printer, buying models and then printing",
"retail? Would you say that saving money is an argument to buy a",
"Would you say that saving money is an argument to buy a 3D",
"you say that saving money is an argument to buy a 3D printer?",
"would you say that you have saved money on buying the printer, buying",
"the models, compared to buying something alike in retail? Would you say that",
"then printing the models, compared to buying something alike in retail? Would you",
"the printer, buying models and then printing the models, compared to buying something",
"say that you have saved money on buying the printer, buying models and",
"printer, would you say that you have saved money on buying the printer,",
"3D printer, would you say that you have saved money on buying the",
"in retail? Would you say that saving money is an argument to buy",
"to buying something alike in retail? Would you say that saving money is",
"printer, buying models and then printing the models, compared to buying something alike",
"compared to buying something alike in retail? Would you say that saving money",
"you say that you have saved money on buying the printer, buying models",
"money on buying the printer, buying models and then printing the models, compared",
"have saved money on buying the printer, buying models and then printing the",
"already have a 3D printer, would you say that you have saved money",
"If you already have a 3D printer, would you say that you have",
"buying something alike in retail? Would you say that saving money is an",
"you already have a 3D printer, would you say that you have saved",
"that you have saved money on buying the printer, buying models and then",
"printing the models, compared to buying something alike in retail? Would you say",
"something alike in retail? Would you say that saving money is an argument",
"alike in retail? Would you say that saving money is an argument to",
"buying the printer, buying models and then printing the models, compared to buying"
] |
[
"curious about the various UV/Laser printers in (or coming into) market that use",
"* Variances in material quality (i.e. diameter, purity, physical conditions) * Mechanics of",
"into) market that use liquid resin. I've seen the samples of the [Pegasus",
"types of printers as with FDM/FFF? Here are some things I consider major",
"I consider major maintenance considerations in FDM: * Extruder Clogging * Build platform",
"put out. However, in my experience with FDM printing, there almost always seems",
"temperature in the build environment, minimize draft) I'm not necessarily looking for printer",
"not necessarily looking for printer recommendations, more so technical insight on the technology.",
"my experience with FDM printing, there almost always seems to be something not",
"I'm not necessarily looking for printer recommendations, more so technical insight on the",
"Clogging * Build platform conditions (i.e. levelness, clean, type of tape, bubbles in",
"as much an issue in these types of printers as with FDM/FFF? Here",
"out. However, in my experience with FDM printing, there almost always seems to",
"draft) I'm not necessarily looking for printer recommendations, more so technical insight on",
"in the build environment, minimize draft) I'm not necessarily looking for printer recommendations,",
"Here are some things I consider major maintenance considerations in FDM: * Extruder",
"are some things I consider major maintenance considerations in FDM: * Extruder Clogging",
"that machines can put out. However, in my experience with FDM printing, there",
"issue in these types of printers as with FDM/FFF? Here are some things",
"Also, specifically, are supports and overhangs as much an issue in these types",
"print. So, what are some major maintenance considerations for these types of 3D",
"diameter, purity, physical conditions) * Mechanics of the machine (i.e. belts, rods, gear",
"types of 3D printing? Also, specifically, are supports and overhangs as much an",
"considerations in FDM: * Extruder Clogging * Build platform conditions (i.e. levelness, clean,",
"use liquid resin. I've seen the samples of the [Pegasus Touch](https://fslaser.com/Products/View/1), [Form1](http://formlabs.com/products/materials/), and",
"major maintenance considerations for these types of 3D printing? Also, specifically, are supports",
"clean, type of tape, bubbles in tape) * Variances in material quality (i.e.",
"printers in (or coming into) market that use liquid resin. I've seen the",
"there almost always seems to be something not quite right about the print.",
"rods, gear teeth, etc.) * Build environment (i.e. ensuring steady temperature in the",
"right about the print. So, what are some major maintenance considerations for these",
"in (or coming into) market that use liquid resin. I've seen the samples",
"in these types of printers as with FDM/FFF? Here are some things I",
"things I consider major maintenance considerations in FDM: * Extruder Clogging * Build",
"Mechanics of the machine (i.e. belts, rods, gear teeth, etc.) * Build environment",
"* Mechanics of the machine (i.e. belts, rods, gear teeth, etc.) * Build",
"maintenance considerations for these types of 3D printing? Also, specifically, are supports and",
"overhangs as much an issue in these types of printers as with FDM/FFF?",
"FDM printing, there almost always seems to be something not quite right about",
"tape) * Variances in material quality (i.e. diameter, purity, physical conditions) * Mechanics",
"to be something not quite right about the print. So, what are some",
"conditions (i.e. levelness, clean, type of tape, bubbles in tape) * Variances in",
"I've been curious about the various UV/Laser printers in (or coming into) market",
"machines can put out. However, in my experience with FDM printing, there almost",
"examples. I like the specifications of the quality that machines can put out.",
"physical conditions) * Mechanics of the machine (i.e. belts, rods, gear teeth, etc.)",
"3D printing? Also, specifically, are supports and overhangs as much an issue in",
"platform conditions (i.e. levelness, clean, type of tape, bubbles in tape) * Variances",
"with FDM printing, there almost always seems to be something not quite right",
"considerations for these types of 3D printing? Also, specifically, are supports and overhangs",
"much an issue in these types of printers as with FDM/FFF? Here are",
"as examples. I like the specifications of the quality that machines can put",
"[Pegasus Touch](https://fslaser.com/Products/View/1), [Form1](http://formlabs.com/products/materials/), and the [Carbon3D](http://carbon3d.com/) as examples. I like the specifications of",
"* Build environment (i.e. ensuring steady temperature in the build environment, minimize draft)",
"I like the specifications of the quality that machines can put out. However,",
"Build platform conditions (i.e. levelness, clean, type of tape, bubbles in tape) *",
"and the [Carbon3D](http://carbon3d.com/) as examples. I like the specifications of the quality that",
"of printers as with FDM/FFF? Here are some things I consider major maintenance",
"* Extruder Clogging * Build platform conditions (i.e. levelness, clean, type of tape,",
"samples of the [Pegasus Touch](https://fslaser.com/Products/View/1), [Form1](http://formlabs.com/products/materials/), and the [Carbon3D](http://carbon3d.com/) as examples. I like",
"some things I consider major maintenance considerations in FDM: * Extruder Clogging *",
"(i.e. levelness, clean, type of tape, bubbles in tape) * Variances in material",
"type of tape, bubbles in tape) * Variances in material quality (i.e. diameter,",
"However, in my experience with FDM printing, there almost always seems to be",
"quality (i.e. diameter, purity, physical conditions) * Mechanics of the machine (i.e. belts,",
"of 3D printing? Also, specifically, are supports and overhangs as much an issue",
"steady temperature in the build environment, minimize draft) I'm not necessarily looking for",
"the build environment, minimize draft) I'm not necessarily looking for printer recommendations, more",
"almost always seems to be something not quite right about the print. So,",
"printing? Also, specifically, are supports and overhangs as much an issue in these",
"been curious about the various UV/Laser printers in (or coming into) market that",
"(i.e. diameter, purity, physical conditions) * Mechanics of the machine (i.e. belts, rods,",
"that use liquid resin. I've seen the samples of the [Pegasus Touch](https://fslaser.com/Products/View/1), [Form1](http://formlabs.com/products/materials/),",
"FDM: * Extruder Clogging * Build platform conditions (i.e. levelness, clean, type of",
"in material quality (i.e. diameter, purity, physical conditions) * Mechanics of the machine",
"supports and overhangs as much an issue in these types of printers as",
"maintenance considerations in FDM: * Extruder Clogging * Build platform conditions (i.e. levelness,",
"belts, rods, gear teeth, etc.) * Build environment (i.e. ensuring steady temperature in",
"can put out. However, in my experience with FDM printing, there almost always",
"in FDM: * Extruder Clogging * Build platform conditions (i.e. levelness, clean, type",
"of tape, bubbles in tape) * Variances in material quality (i.e. diameter, purity,",
"specifically, are supports and overhangs as much an issue in these types of",
"an issue in these types of printers as with FDM/FFF? Here are some",
"always seems to be something not quite right about the print. So, what",
"of the machine (i.e. belts, rods, gear teeth, etc.) * Build environment (i.e.",
"Build environment (i.e. ensuring steady temperature in the build environment, minimize draft) I'm",
"consider major maintenance considerations in FDM: * Extruder Clogging * Build platform conditions",
"machine (i.e. belts, rods, gear teeth, etc.) * Build environment (i.e. ensuring steady",
"[Carbon3D](http://carbon3d.com/) as examples. I like the specifications of the quality that machines can",
"(or coming into) market that use liquid resin. I've seen the samples of",
"market that use liquid resin. I've seen the samples of the [Pegasus Touch](https://fslaser.com/Products/View/1),",
"levelness, clean, type of tape, bubbles in tape) * Variances in material quality",
"specifications of the quality that machines can put out. However, in my experience",
"the various UV/Laser printers in (or coming into) market that use liquid resin.",
"are some major maintenance considerations for these types of 3D printing? Also, specifically,",
"* Build platform conditions (i.e. levelness, clean, type of tape, bubbles in tape)",
"major maintenance considerations in FDM: * Extruder Clogging * Build platform conditions (i.e.",
"build environment, minimize draft) I'm not necessarily looking for printer recommendations, more so",
"seems to be something not quite right about the print. So, what are",
"for these types of 3D printing? Also, specifically, are supports and overhangs as",
"printing, there almost always seems to be something not quite right about the",
"something not quite right about the print. So, what are some major maintenance",
"FDM/FFF? Here are some things I consider major maintenance considerations in FDM: *",
"the [Pegasus Touch](https://fslaser.com/Products/View/1), [Form1](http://formlabs.com/products/materials/), and the [Carbon3D](http://carbon3d.com/) as examples. I like the specifications",
"of the [Pegasus Touch](https://fslaser.com/Products/View/1), [Form1](http://formlabs.com/products/materials/), and the [Carbon3D](http://carbon3d.com/) as examples. I like the",
"Variances in material quality (i.e. diameter, purity, physical conditions) * Mechanics of the",
"are supports and overhangs as much an issue in these types of printers",
"the [Carbon3D](http://carbon3d.com/) as examples. I like the specifications of the quality that machines",
"I've seen the samples of the [Pegasus Touch](https://fslaser.com/Products/View/1), [Form1](http://formlabs.com/products/materials/), and the [Carbon3D](http://carbon3d.com/) as",
"the specifications of the quality that machines can put out. However, in my",
"purity, physical conditions) * Mechanics of the machine (i.e. belts, rods, gear teeth,",
"minimize draft) I'm not necessarily looking for printer recommendations, more so technical insight",
"quite right about the print. So, what are some major maintenance considerations for",
"resin. I've seen the samples of the [Pegasus Touch](https://fslaser.com/Products/View/1), [Form1](http://formlabs.com/products/materials/), and the [Carbon3D](http://carbon3d.com/)",
"experience with FDM printing, there almost always seems to be something not quite",
"tape, bubbles in tape) * Variances in material quality (i.e. diameter, purity, physical",
"quality that machines can put out. However, in my experience with FDM printing,",
"the samples of the [Pegasus Touch](https://fslaser.com/Products/View/1), [Form1](http://formlabs.com/products/materials/), and the [Carbon3D](http://carbon3d.com/) as examples. I",
"these types of printers as with FDM/FFF? Here are some things I consider",
"environment (i.e. ensuring steady temperature in the build environment, minimize draft) I'm not",
"gear teeth, etc.) * Build environment (i.e. ensuring steady temperature in the build",
"about the various UV/Laser printers in (or coming into) market that use liquid",
"like the specifications of the quality that machines can put out. However, in",
"(i.e. ensuring steady temperature in the build environment, minimize draft) I'm not necessarily",
"these types of 3D printing? Also, specifically, are supports and overhangs as much",
"Touch](https://fslaser.com/Products/View/1), [Form1](http://formlabs.com/products/materials/), and the [Carbon3D](http://carbon3d.com/) as examples. I like the specifications of the",
"in my experience with FDM printing, there almost always seems to be something",
"printers as with FDM/FFF? Here are some things I consider major maintenance considerations",
"conditions) * Mechanics of the machine (i.e. belts, rods, gear teeth, etc.) *",
"[Form1](http://formlabs.com/products/materials/), and the [Carbon3D](http://carbon3d.com/) as examples. I like the specifications of the quality",
"the machine (i.e. belts, rods, gear teeth, etc.) * Build environment (i.e. ensuring",
"ensuring steady temperature in the build environment, minimize draft) I'm not necessarily looking",
"UV/Laser printers in (or coming into) market that use liquid resin. I've seen",
"coming into) market that use liquid resin. I've seen the samples of the",
"not quite right about the print. So, what are some major maintenance considerations",
"liquid resin. I've seen the samples of the [Pegasus Touch](https://fslaser.com/Products/View/1), [Form1](http://formlabs.com/products/materials/), and the",
"(i.e. belts, rods, gear teeth, etc.) * Build environment (i.e. ensuring steady temperature",
"and overhangs as much an issue in these types of printers as with",
"material quality (i.e. diameter, purity, physical conditions) * Mechanics of the machine (i.e.",
"environment, minimize draft) I'm not necessarily looking for printer recommendations, more so technical",
"the print. So, what are some major maintenance considerations for these types of",
"in tape) * Variances in material quality (i.e. diameter, purity, physical conditions) *",
"various UV/Laser printers in (or coming into) market that use liquid resin. I've",
"So, what are some major maintenance considerations for these types of 3D printing?",
"what are some major maintenance considerations for these types of 3D printing? Also,",
"of the quality that machines can put out. However, in my experience with",
"be something not quite right about the print. So, what are some major",
"bubbles in tape) * Variances in material quality (i.e. diameter, purity, physical conditions)",
"Extruder Clogging * Build platform conditions (i.e. levelness, clean, type of tape, bubbles",
"seen the samples of the [Pegasus Touch](https://fslaser.com/Products/View/1), [Form1](http://formlabs.com/products/materials/), and the [Carbon3D](http://carbon3d.com/) as examples.",
"as with FDM/FFF? Here are some things I consider major maintenance considerations in",
"about the print. So, what are some major maintenance considerations for these types",
"some major maintenance considerations for these types of 3D printing? Also, specifically, are",
"etc.) * Build environment (i.e. ensuring steady temperature in the build environment, minimize",
"with FDM/FFF? Here are some things I consider major maintenance considerations in FDM:",
"teeth, etc.) * Build environment (i.e. ensuring steady temperature in the build environment,",
"the quality that machines can put out. However, in my experience with FDM"
] |
[
"had the full G-code on my computer, and decided to try and resume",
"full G-code on my computer, and decided to try and resume the print",
"does it look good, and my problem is probably the nozzle? ``` ;FLAVOR:UltiGCode",
"seemed to work, with the exception of a little excess extrusion at a",
"at a single point in the beginning, but after three layers, i noticed",
"I am not completely positive that it isn't due to nozzle jamming, but",
"it isn't due to nozzle jamming, but I have a strong feeling that",
"the blob in the beginning, or why I don't get anything at all",
"Z16.610 ;TYPE:FILL G1 F3600 X210.390 Y105.771 E4104.65185 G0 F9000 X210.390 Y103.170 G1 F3600",
"strong feeling that the problem is the G-code itself, as it does extrude",
"Y105.771 E4104.65185 G0 F9000 X210.390 Y103.170 G1 F3600 X168.331 Y61.111 E4107.77457 G0 F9000",
"from layer 108. It seemed to work, with the exception of a little",
"is the G-code itself, as it does extrude some plastic just before printing",
"starts. Here are the first lines of my manually edited G-code. Can anyone",
"G-code. Can anyone see why I get the blob in the beginning, or",
"are the first lines of my manually edited G-code. Can anyone see why",
"the first lines of my manually edited G-code. Can anyone see why I",
"the print from layer 108. It seemed to work, with the exception of",
";LAYER:109 G0 F9000 X208.213 Y107.948 Z16.610 ;TYPE:FILL G1 F3600 X210.390 Y105.771 E4104.65185 G0",
"must have failed to copy the G-code correctly, because the print stopped after",
"plastic just before printing starts. Here are the first lines of my manually",
"Y107.948 Z16.610 ;TYPE:FILL G1 F3600 X210.390 Y105.771 E4104.65185 G0 F9000 X210.390 Y103.170 G1",
"However, I had the full G-code on my computer, and decided to try",
"Looking at the G-code, It also stops there. However, I had the full",
"E4107.77457 G0 F9000 X167.074 Y61.111 G1 F3600 X120.237 Y107.949 E4111.25208 G0 F9000 X121.695",
"Can anyone see why I get the blob in the beginning, or why",
"of 223 layers. Looking at the G-code, It also stops there. However, I",
"G0 F9000 X167.074 Y61.111 G1 F3600 X120.237 Y107.949 E4111.25208 G0 F9000 X121.695 Y107.949",
"at the G-code, It also stops there. However, I had the full G-code",
"have a strong feeling that the problem is the G-code itself, as it",
"the G-code, It also stops there. However, I had the full G-code on",
"of a little excess extrusion at a single point in the beginning, but",
"also stops there. However, I had the full G-code on my computer, and",
"extrude some plastic just before printing starts. Here are the first lines of",
"on? Or does it look good, and my problem is probably the nozzle?",
"problem is probably the nozzle? ``` ;FLAVOR:UltiGCode ;TIME:60308 ;MATERIAL:119047 ;MATERIAL2:0 ;NOZZLE_DIAMETER:0.400000 ;NOZZLE_DIAMETER2:0.400000 ;MTYPE:PLA",
"layer 108. It seemed to work, with the exception of a little excess",
"it look good, and my problem is probably the nozzle? ``` ;FLAVOR:UltiGCode ;TIME:60308",
"nozzle? ``` ;FLAVOR:UltiGCode ;TIME:60308 ;MATERIAL:119047 ;MATERIAL2:0 ;NOZZLE_DIAMETER:0.400000 ;NOZZLE_DIAMETER2:0.400000 ;MTYPE:PLA ;Layer count: 222 ;LAYER:109",
"is probably the nozzle? ``` ;FLAVOR:UltiGCode ;TIME:60308 ;MATERIAL:119047 ;MATERIAL2:0 ;NOZZLE_DIAMETER:0.400000 ;NOZZLE_DIAMETER2:0.400000 ;MTYPE:PLA ;Layer",
"after three layers, i noticed that it wasn't extruding anymore. I am not",
"F3600 X74.857 Y61.111 E4114.72962 G0 F9000 X73.600 Y61.111 G1 F3600 X26.763 Y107.948 E4118.20709",
";Layer count: 222 ;LAYER:109 G0 F9000 X208.213 Y107.948 Z16.610 ;TYPE:FILL G1 F3600 X210.390",
"all later on? Or does it look good, and my problem is probably",
"a strong feeling that the problem is the G-code itself, as it does",
"the nozzle? ``` ;FLAVOR:UltiGCode ;TIME:60308 ;MATERIAL:119047 ;MATERIAL2:0 ;NOZZLE_DIAMETER:0.400000 ;NOZZLE_DIAMETER2:0.400000 ;MTYPE:PLA ;Layer count: 222",
"work, with the exception of a little excess extrusion at a single point",
"on my computer, and decided to try and resume the print from layer",
"after 107 of 223 layers. Looking at the G-code, It also stops there.",
"first lines of my manually edited G-code. Can anyone see why I get",
"it does extrude some plastic just before printing starts. Here are the first",
"beginning, or why I don't get anything at all later on? Or does",
"F9000 X210.390 Y103.170 G1 F3600 X168.331 Y61.111 E4107.77457 G0 F9000 X167.074 Y61.111 G1",
"some plastic just before printing starts. Here are the first lines of my",
"222 ;LAYER:109 G0 F9000 X208.213 Y107.948 Z16.610 ;TYPE:FILL G1 F3600 X210.390 Y105.771 E4104.65185",
"G-code, It also stops there. However, I had the full G-code on my",
"X208.213 Y107.948 Z16.610 ;TYPE:FILL G1 F3600 X210.390 Y105.771 E4104.65185 G0 F9000 X210.390 Y103.170",
"the print stopped after 107 of 223 layers. Looking at the G-code, It",
"I have a strong feeling that the problem is the G-code itself, as",
"I get the blob in the beginning, or why I don't get anything",
"copy the G-code correctly, because the print stopped after 107 of 223 layers.",
"Y61.111 G1 F3600 X120.237 Y107.949 E4111.25208 G0 F9000 X121.695 Y107.949 G1 F3600 X74.857",
"get the blob in the beginning, or why I don't get anything at",
"``` ;FLAVOR:UltiGCode ;TIME:60308 ;MATERIAL:119047 ;MATERIAL2:0 ;NOZZLE_DIAMETER:0.400000 ;NOZZLE_DIAMETER2:0.400000 ;MTYPE:PLA ;Layer count: 222 ;LAYER:109 G0",
"to try and resume the print from layer 108. It seemed to work,",
"print stopped after 107 of 223 layers. Looking at the G-code, It also",
"F9000 X121.695 Y107.949 G1 F3600 X74.857 Y61.111 E4114.72962 G0 F9000 X73.600 Y61.111 G1",
"F3600 X210.390 Y105.771 E4104.65185 G0 F9000 X210.390 Y103.170 G1 F3600 X168.331 Y61.111 E4107.77457",
"manually edited G-code. Can anyone see why I get the blob in the",
";MATERIAL:119047 ;MATERIAL2:0 ;NOZZLE_DIAMETER:0.400000 ;NOZZLE_DIAMETER2:0.400000 ;MTYPE:PLA ;Layer count: 222 ;LAYER:109 G0 F9000 X208.213 Y107.948",
"positive that it isn't due to nozzle jamming, but I have a strong",
"223 layers. Looking at the G-code, It also stops there. However, I had",
"108. It seemed to work, with the exception of a little excess extrusion",
"i noticed that it wasn't extruding anymore. I am not completely positive that",
"F3600 X120.237 Y107.949 E4111.25208 G0 F9000 X121.695 Y107.949 G1 F3600 X74.857 Y61.111 E4114.72962",
"print from layer 108. It seemed to work, with the exception of a",
"nozzle jamming, but I have a strong feeling that the problem is the",
"probably the nozzle? ``` ;FLAVOR:UltiGCode ;TIME:60308 ;MATERIAL:119047 ;MATERIAL2:0 ;NOZZLE_DIAMETER:0.400000 ;NOZZLE_DIAMETER2:0.400000 ;MTYPE:PLA ;Layer count:",
"but I must have failed to copy the G-code correctly, because the print",
"it wasn't extruding anymore. I am not completely positive that it isn't due",
"G0 F9000 X208.213 Y107.948 Z16.610 ;TYPE:FILL G1 F3600 X210.390 Y105.771 E4104.65185 G0 F9000",
"X210.390 Y105.771 E4104.65185 G0 F9000 X210.390 Y103.170 G1 F3600 X168.331 Y61.111 E4107.77457 G0",
"or why I don't get anything at all later on? Or does it",
"G0 F9000 X210.390 Y103.170 G1 F3600 X168.331 Y61.111 E4107.77457 G0 F9000 X167.074 Y61.111",
"as it does extrude some plastic just before printing starts. Here are the",
"before printing starts. Here are the first lines of my manually edited G-code.",
"process of printing a 16 hour print, but I must have failed to",
"try and resume the print from layer 108. It seemed to work, with",
"the beginning, or why I don't get anything at all later on? Or",
"my manually edited G-code. Can anyone see why I get the blob in",
"does extrude some plastic just before printing starts. Here are the first lines",
"I had the full G-code on my computer, and decided to try and",
"that the problem is the G-code itself, as it does extrude some plastic",
"X210.390 Y103.170 G1 F3600 X168.331 Y61.111 E4107.77457 G0 F9000 X167.074 Y61.111 G1 F3600",
"layers. Looking at the G-code, It also stops there. However, I had the",
"due to nozzle jamming, but I have a strong feeling that the problem",
"my computer, and decided to try and resume the print from layer 108.",
"to work, with the exception of a little excess extrusion at a single",
"single point in the beginning, but after three layers, i noticed that it",
"was in the process of printing a 16 hour print, but I must",
"have failed to copy the G-code correctly, because the print stopped after 107",
"why I don't get anything at all later on? Or does it look",
"16 hour print, but I must have failed to copy the G-code correctly,",
"three layers, i noticed that it wasn't extruding anymore. I am not completely",
"printing a 16 hour print, but I must have failed to copy the",
"Y61.111 E4107.77457 G0 F9000 X167.074 Y61.111 G1 F3600 X120.237 Y107.949 E4111.25208 G0 F9000",
"point in the beginning, but after three layers, i noticed that it wasn't",
";MATERIAL2:0 ;NOZZLE_DIAMETER:0.400000 ;NOZZLE_DIAMETER2:0.400000 ;MTYPE:PLA ;Layer count: 222 ;LAYER:109 G0 F9000 X208.213 Y107.948 Z16.610",
";TYPE:FILL G1 F3600 X210.390 Y105.771 E4104.65185 G0 F9000 X210.390 Y103.170 G1 F3600 X168.331",
"completely positive that it isn't due to nozzle jamming, but I have a",
"good, and my problem is probably the nozzle? ``` ;FLAVOR:UltiGCode ;TIME:60308 ;MATERIAL:119047 ;MATERIAL2:0",
"hour print, but I must have failed to copy the G-code correctly, because",
"It also stops there. However, I had the full G-code on my computer,",
"my problem is probably the nozzle? ``` ;FLAVOR:UltiGCode ;TIME:60308 ;MATERIAL:119047 ;MATERIAL2:0 ;NOZZLE_DIAMETER:0.400000 ;NOZZLE_DIAMETER2:0.400000",
"Here are the first lines of my manually edited G-code. Can anyone see",
"the full G-code on my computer, and decided to try and resume the",
"layers, i noticed that it wasn't extruding anymore. I am not completely positive",
"beginning, but after three layers, i noticed that it wasn't extruding anymore. I",
"but I have a strong feeling that the problem is the G-code itself,",
"I was in the process of printing a 16 hour print, but I",
"to copy the G-code correctly, because the print stopped after 107 of 223",
"there. However, I had the full G-code on my computer, and decided to",
"but after three layers, i noticed that it wasn't extruding anymore. I am",
"jamming, but I have a strong feeling that the problem is the G-code",
"in the beginning, but after three layers, i noticed that it wasn't extruding",
"F3600 X168.331 Y61.111 E4107.77457 G0 F9000 X167.074 Y61.111 G1 F3600 X120.237 Y107.949 E4111.25208",
"a single point in the beginning, but after three layers, i noticed that",
"get anything at all later on? Or does it look good, and my",
"computer, and decided to try and resume the print from layer 108. It",
"E4104.65185 G0 F9000 X210.390 Y103.170 G1 F3600 X168.331 Y61.111 E4107.77457 G0 F9000 X167.074",
"feeling that the problem is the G-code itself, as it does extrude some",
"the G-code itself, as it does extrude some plastic just before printing starts.",
"later on? Or does it look good, and my problem is probably the",
"a 16 hour print, but I must have failed to copy the G-code",
"correctly, because the print stopped after 107 of 223 layers. Looking at the",
"and decided to try and resume the print from layer 108. It seemed",
"the beginning, but after three layers, i noticed that it wasn't extruding anymore.",
"the exception of a little excess extrusion at a single point in the",
"resume the print from layer 108. It seemed to work, with the exception",
"printing starts. Here are the first lines of my manually edited G-code. Can",
"the G-code correctly, because the print stopped after 107 of 223 layers. Looking",
"look good, and my problem is probably the nozzle? ``` ;FLAVOR:UltiGCode ;TIME:60308 ;MATERIAL:119047",
"a little excess extrusion at a single point in the beginning, but after",
"F9000 X167.074 Y61.111 G1 F3600 X120.237 Y107.949 E4111.25208 G0 F9000 X121.695 Y107.949 G1",
"Y107.949 E4111.25208 G0 F9000 X121.695 Y107.949 G1 F3600 X74.857 Y61.111 E4114.72962 G0 F9000",
"G1 F3600 X74.857 Y61.111 E4114.72962 G0 F9000 X73.600 Y61.111 G1 F3600 X26.763 Y107.948",
"Y107.949 G1 F3600 X74.857 Y61.111 E4114.72962 G0 F9000 X73.600 Y61.111 G1 F3600 X26.763",
"at all later on? Or does it look good, and my problem is",
"print, but I must have failed to copy the G-code correctly, because the",
"decided to try and resume the print from layer 108. It seemed to",
"107 of 223 layers. Looking at the G-code, It also stops there. However,",
"just before printing starts. Here are the first lines of my manually edited",
"Or does it look good, and my problem is probably the nozzle? ```",
"It seemed to work, with the exception of a little excess extrusion at",
"not completely positive that it isn't due to nozzle jamming, but I have",
"the problem is the G-code itself, as it does extrude some plastic just",
"and my problem is probably the nozzle? ``` ;FLAVOR:UltiGCode ;TIME:60308 ;MATERIAL:119047 ;MATERIAL2:0 ;NOZZLE_DIAMETER:0.400000",
"count: 222 ;LAYER:109 G0 F9000 X208.213 Y107.948 Z16.610 ;TYPE:FILL G1 F3600 X210.390 Y105.771",
"G1 F3600 X168.331 Y61.111 E4107.77457 G0 F9000 X167.074 Y61.111 G1 F3600 X120.237 Y107.949",
"G0 F9000 X121.695 Y107.949 G1 F3600 X74.857 Y61.111 E4114.72962 G0 F9000 X73.600 Y61.111",
"extruding anymore. I am not completely positive that it isn't due to nozzle",
"G-code itself, as it does extrude some plastic just before printing starts. Here",
"anyone see why I get the blob in the beginning, or why I",
"of my manually edited G-code. Can anyone see why I get the blob",
"stops there. However, I had the full G-code on my computer, and decided",
"with the exception of a little excess extrusion at a single point in",
"G-code correctly, because the print stopped after 107 of 223 layers. Looking at",
"I must have failed to copy the G-code correctly, because the print stopped",
"G1 F3600 X210.390 Y105.771 E4104.65185 G0 F9000 X210.390 Y103.170 G1 F3600 X168.331 Y61.111",
"edited G-code. Can anyone see why I get the blob in the beginning,",
"E4111.25208 G0 F9000 X121.695 Y107.949 G1 F3600 X74.857 Y61.111 E4114.72962 G0 F9000 X73.600",
"extrusion at a single point in the beginning, but after three layers, i",
"that it isn't due to nozzle jamming, but I have a strong feeling",
"don't get anything at all later on? Or does it look good, and",
"G1 F3600 X120.237 Y107.949 E4111.25208 G0 F9000 X121.695 Y107.949 G1 F3600 X74.857 Y61.111",
"stopped after 107 of 223 layers. Looking at the G-code, It also stops",
"problem is the G-code itself, as it does extrude some plastic just before",
"in the beginning, or why I don't get anything at all later on?",
"Y103.170 G1 F3600 X168.331 Y61.111 E4107.77457 G0 F9000 X167.074 Y61.111 G1 F3600 X120.237",
"anything at all later on? Or does it look good, and my problem",
"little excess extrusion at a single point in the beginning, but after three",
"in the process of printing a 16 hour print, but I must have",
"noticed that it wasn't extruding anymore. I am not completely positive that it",
"X121.695 Y107.949 G1 F3600 X74.857 Y61.111 E4114.72962 G0 F9000 X73.600 Y61.111 G1 F3600",
";TIME:60308 ;MATERIAL:119047 ;MATERIAL2:0 ;NOZZLE_DIAMETER:0.400000 ;NOZZLE_DIAMETER2:0.400000 ;MTYPE:PLA ;Layer count: 222 ;LAYER:109 G0 F9000 X208.213",
"of printing a 16 hour print, but I must have failed to copy",
";MTYPE:PLA ;Layer count: 222 ;LAYER:109 G0 F9000 X208.213 Y107.948 Z16.610 ;TYPE:FILL G1 F3600",
"excess extrusion at a single point in the beginning, but after three layers,",
"I don't get anything at all later on? Or does it look good,",
"X168.331 Y61.111 E4107.77457 G0 F9000 X167.074 Y61.111 G1 F3600 X120.237 Y107.949 E4111.25208 G0",
";FLAVOR:UltiGCode ;TIME:60308 ;MATERIAL:119047 ;MATERIAL2:0 ;NOZZLE_DIAMETER:0.400000 ;NOZZLE_DIAMETER2:0.400000 ;MTYPE:PLA ;Layer count: 222 ;LAYER:109 G0 F9000",
"itself, as it does extrude some plastic just before printing starts. Here are",
"G-code on my computer, and decided to try and resume the print from",
"wasn't extruding anymore. I am not completely positive that it isn't due to",
"isn't due to nozzle jamming, but I have a strong feeling that the",
"the process of printing a 16 hour print, but I must have failed",
"see why I get the blob in the beginning, or why I don't",
"anymore. I am not completely positive that it isn't due to nozzle jamming,",
"exception of a little excess extrusion at a single point in the beginning,",
"because the print stopped after 107 of 223 layers. Looking at the G-code,",
"why I get the blob in the beginning, or why I don't get",
"to nozzle jamming, but I have a strong feeling that the problem is",
"F9000 X208.213 Y107.948 Z16.610 ;TYPE:FILL G1 F3600 X210.390 Y105.771 E4104.65185 G0 F9000 X210.390",
";NOZZLE_DIAMETER:0.400000 ;NOZZLE_DIAMETER2:0.400000 ;MTYPE:PLA ;Layer count: 222 ;LAYER:109 G0 F9000 X208.213 Y107.948 Z16.610 ;TYPE:FILL",
"failed to copy the G-code correctly, because the print stopped after 107 of",
"that it wasn't extruding anymore. I am not completely positive that it isn't",
"X167.074 Y61.111 G1 F3600 X120.237 Y107.949 E4111.25208 G0 F9000 X121.695 Y107.949 G1 F3600",
"X74.857 Y61.111 E4114.72962 G0 F9000 X73.600 Y61.111 G1 F3600 X26.763 Y107.948 E4118.20709 ```",
"am not completely positive that it isn't due to nozzle jamming, but I",
"lines of my manually edited G-code. Can anyone see why I get the",
"and resume the print from layer 108. It seemed to work, with the",
"blob in the beginning, or why I don't get anything at all later",
"X120.237 Y107.949 E4111.25208 G0 F9000 X121.695 Y107.949 G1 F3600 X74.857 Y61.111 E4114.72962 G0",
";NOZZLE_DIAMETER2:0.400000 ;MTYPE:PLA ;Layer count: 222 ;LAYER:109 G0 F9000 X208.213 Y107.948 Z16.610 ;TYPE:FILL G1"
] |
[
"this how its supose to be if not what do I need to",
"adjusted my z axis end stop via the paper test. However when I",
"the paper test. However when I press to home all the axis the",
"the print bed moves it down slightly then goes to the postion I",
"axis end stop via the paper test. However when I press to home",
"then goes to the postion I describe. Is this how its supose to",
"moves it down slightly then goes to the postion I describe. Is this",
"my z axis end stop via the paper test. However when I press",
"paper test. However when I press to home all the axis the z",
"test. However when I press to home all the axis the z axis",
"axis hits the print bed moves it down slightly then goes to the",
"to home all the axis the z axis hits the print bed moves",
"describe. Is this how its supose to be if not what do I",
"the axis the z axis hits the print bed moves it down slightly",
"I press to home all the axis the z axis hits the print",
"z axis end stop via the paper test. However when I press to",
"postion I describe. Is this how its supose to be if not what",
"axis the z axis hits the print bed moves it down slightly then",
"I describe. Is this how its supose to be if not what do",
"when I press to home all the axis the z axis hits the",
"end stop via the paper test. However when I press to home all",
"stop via the paper test. However when I press to home all the",
"it down slightly then goes to the postion I describe. Is this how",
"print bed moves it down slightly then goes to the postion I describe.",
"all the axis the z axis hits the print bed moves it down",
"I have adjusted my z axis end stop via the paper test. However",
"have adjusted my z axis end stop via the paper test. However when",
"how its supose to be if not what do I need to do?",
"the z axis hits the print bed moves it down slightly then goes",
"hits the print bed moves it down slightly then goes to the postion",
"down slightly then goes to the postion I describe. Is this how its",
"z axis hits the print bed moves it down slightly then goes to",
"press to home all the axis the z axis hits the print bed",
"goes to the postion I describe. Is this how its supose to be",
"via the paper test. However when I press to home all the axis",
"However when I press to home all the axis the z axis hits",
"bed moves it down slightly then goes to the postion I describe. Is",
"the postion I describe. Is this how its supose to be if not",
"to the postion I describe. Is this how its supose to be if",
"slightly then goes to the postion I describe. Is this how its supose",
"home all the axis the z axis hits the print bed moves it",
"Is this how its supose to be if not what do I need"
] |
[
"I'll probably try it at some point just to see what happens, but",
"to print several copies of a large, flat object, such as a hollow",
"to to print several copies of a large, flat object, such as a",
"then my 3D printer's software happily generates supports for the upper objects to",
"than printing them all separately. I'll probably try it at some point just",
"objects to sit on, as shown below: [](https://i.stack.imgur.com/XbxbGm.png) My question",
"it has several advantages. I can print more copies at once than if",
"the ones below it will still be OK. It doesn't take that much",
"people doing before, so I'm wondering if there's a good reason why it",
"it will still be OK. It doesn't take that much more filament than",
"to each other on the platform, and if one of the prints fails",
"of the prints fails the ones below it will still be OK. It",
"image description here](https://i.stack.imgur.com/XbxbGm.png)](https://i.stack.imgur.com/XbxbGm.png) My question is, is this a crazy idea? If it",
"consisting of several copies floating just above each other then my 3D printer's",
"above each other then my 3D printer's software happily generates supports for the",
"[](https://i.stack.imgur.com/XbxbGm.png) My question is, is this a crazy idea? If",
"happily generates supports for the upper objects to sit on, as shown below:",
"just above each other then my 3D printer's software happily generates supports for",
"I make an STL file consisting of several copies floating just above each",
"large, flat object, such as a hollow frame. If I make an STL",
"good reason why it won't work or would otherwise not be a good",
"once than if I tried to fit them next to each other on",
"more filament than printing them all separately. I'll probably try it at some",
"something I've heard of people doing before, so I'm wondering if there's a",
"supports for the upper objects to sit on, as shown below: [](https://i.stack.imgur.com/XbxbGm.png) My question is, is this a crazy idea? If it will",
"generates supports for the upper objects to sit on, as shown below: [](https://i.stack.imgur.com/XbxbGm.png) My question is, is this a crazy",
"below: [](https://i.stack.imgur.com/XbxbGm.png) My question is, is this a crazy idea?",
"printing them all separately. I'll probably try it at some point just to",
"print several copies of a large, flat object, such as a hollow frame.",
"below it will still be OK. It doesn't take that much more filament",
"a large, flat object, such as a hollow frame. If I make an",
"make an STL file consisting of several copies floating just above each other",
"fit them next to each other on the platform, and if one of",
"doing before, so I'm wondering if there's a good reason why it won't",
"to fit them next to each other on the platform, and if one",
"OK. It doesn't take that much more filament than printing them all separately.",
"a hollow frame. If I make an STL file consisting of several copies",
"will work it seems it has several advantages. I can print more copies",
"it will work it seems it has several advantages. I can print more",
"such as a hollow frame. If I make an STL file consisting of",
"If it will work it seems it has several advantages. I can print",
"at once than if I tried to fit them next to each other",
"all separately. I'll probably try it at some point just to see what",
"I'm wondering if there's a good reason why it won't work or would",
"if I tried to fit them next to each other on the platform,",
"upper objects to sit on, as shown below: [](https://i.stack.imgur.com/XbxbGm.png) My",
"sit on, as shown below: [](https://i.stack.imgur.com/XbxbGm.png) My question is, is",
"printer's software happily generates supports for the upper objects to sit on, as",
"seems it has several advantages. I can print more copies at once than",
"flat object, such as a hollow frame. If I make an STL file",
"I've heard of people doing before, so I'm wondering if there's a good",
"that much more filament than printing them all separately. I'll probably try it",
"if one of the prints fails the ones below it will still be",
"It doesn't take that much more filament than printing them all separately. I'll",
"floating just above each other then my 3D printer's software happily generates supports",
"I want to to print several copies of a large, flat object, such",
"fails the ones below it will still be OK. It doesn't take that",
"the upper objects to sit on, as shown below: [](https://i.stack.imgur.com/XbxbGm.png)",
"as shown below: [](https://i.stack.imgur.com/XbxbGm.png) My question is, is this a",
"point just to see what happens, but it's not something I've heard of",
"copies of a large, flat object, such as a hollow frame. If I",
"hollow frame. If I make an STL file consisting of several copies floating",
"tried to fit them next to each other on the platform, and if",
"much more filament than printing them all separately. I'll probably try it at",
"of people doing before, so I'm wondering if there's a good reason why",
"My question is, is this a crazy idea? If it will work it",
"of a large, flat object, such as a hollow frame. If I make",
"is, is this a crazy idea? If it will work it seems it",
"STL file consisting of several copies floating just above each other then my",
"prints fails the ones below it will still be OK. It doesn't take",
"filament than printing them all separately. I'll probably try it at some point",
"of several copies floating just above each other then my 3D printer's software",
"at some point just to see what happens, but it's not something I've",
"If I make an STL file consisting of several copies floating just above",
"advantages. I can print more copies at once than if I tried to",
"to see what happens, but it's not something I've heard of people doing",
"work it seems it has several advantages. I can print more copies at",
"doesn't take that much more filament than printing them all separately. I'll probably",
"a crazy idea? If it will work it seems it has several advantages.",
"probably try it at some point just to see what happens, but it's",
"than if I tried to fit them next to each other on the",
"heard of people doing before, so I'm wondering if there's a good reason",
"question is, is this a crazy idea? If it will work it seems",
"it seems it has several advantages. I can print more copies at once",
"several copies of a large, flat object, such as a hollow frame. If",
"reason why it won't work or would otherwise not be a good strategy.",
"take that much more filament than printing them all separately. I'll probably try",
"several copies floating just above each other then my 3D printer's software happily",
"if there's a good reason why it won't work or would otherwise not",
"still be OK. It doesn't take that much more filament than printing them",
"more copies at once than if I tried to fit them next to",
"platform, and if one of the prints fails the ones below it will",
"to sit on, as shown below: [](https://i.stack.imgur.com/XbxbGm.png) My question is,",
"3D printer's software happily generates supports for the upper objects to sit on,",
"my 3D printer's software happily generates supports for the upper objects to sit",
"I tried to fit them next to each other on the platform, and",
"the platform, and if one of the prints fails the ones below it",
"software happily generates supports for the upper objects to sit on, as shown",
"Suppose I want to to print several copies of a large, flat object,",
"for the upper objects to sit on, as shown below: [](https://i.stack.imgur.com/XbxbGm.png) My question is, is this",
"here](https://i.stack.imgur.com/XbxbGm.png)](https://i.stack.imgur.com/XbxbGm.png) My question is, is this a crazy idea? If it will work",
"an STL file consisting of several copies floating just above each other then",
"just to see what happens, but it's not something I've heard of people",
"on the platform, and if one of the prints fails the ones below",
"is this a crazy idea? If it will work it seems it has",
"this a crazy idea? If it will work it seems it has several",
"one of the prints fails the ones below it will still be OK.",
"as a hollow frame. If I make an STL file consisting of several",
"other then my 3D printer's software happily generates supports for the upper objects",
"separately. I'll probably try it at some point just to see what happens,",
"them next to each other on the platform, and if one of the",
"each other then my 3D printer's software happily generates supports for the upper"
] |
[
"Supply Documentation](http://reprap.org/wiki/Power_Supply#OEM_type_PSU) which reads: > > In the US, IEC320 C14 plug connections",
"Documentation](http://reprap.org/wiki/Power_Supply#OEM_type_PSU) which reads: > > In the US, IEC320 C14 plug connections are",
"[this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) I believe it's like the one specified in the [Power",
"the black (hot - L), white (Common - N) and Green (Ground) wires.",
"(hot - L), white (Common - N) and Green (Ground) wires. For the",
"be the input into my [OEM Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) via the black (hot -",
"Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and I intend to hook up with [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) I believe",
"thingiverse project](http://www.thingiverse.com/thing:31659). Inside the switch I've also added an F4AL250V fuse. Now what's",
"added an F4AL250V fuse. Now what's confusing me is, that the [this rocker",
"like in the [this thingiverse project](http://www.thingiverse.com/thing:31659), so it can be the input into",
"one specified in the [Power Supply Documentation](http://reprap.org/wiki/Power_Supply#OEM_type_PSU) which reads: > > In the",
"just like in the [this thingiverse project](http://www.thingiverse.com/thing:31659), so it can be the input",
"> In the US, IEC320 C14 plug connections are common, but use your",
"was attached in [this thingiverse project](http://www.thingiverse.com/thing:31659). Inside the switch I've also added an",
"that the [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) on the back reads 10A 250V~ so I'm",
"if it's safe to use. The switch will be connected to the house",
"Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) via the black (hot - L), white (Common - N) and Green",
"> I've also seen where this was attached in [this thingiverse project](http://www.thingiverse.com/thing:31659). Inside",
"rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) on the back reads 10A 250V~ so I'm wondering if it's",
"N) and Green (Ground) wires. For the connecting wires I stripped a black",
"confusing me is, that the [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) on the back reads 10A",
"250V~ so I'm wondering if it's safe to use. The switch will be",
"but use your > preferred standard. > > > I've also seen where",
"Inside the switch I've also added an F4AL250V fuse. Now what's confusing me",
"an [OEM Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and I intend to hook up with [this rocker",
"black PC Tower wire to get at the black, white, and ground wires",
"and wired just like in the [this thingiverse project](http://www.thingiverse.com/thing:31659), so it can be",
"project](http://www.thingiverse.com/thing:31659), so it can be the input into my [OEM Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) via",
"wires I stripped a black PC Tower wire to get at the black,",
"In the US, IEC320 C14 plug connections are common, but use your >",
"[OEM Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) via the black (hot - L), white (Common - N)",
"[Power Supply Documentation](http://reprap.org/wiki/Power_Supply#OEM_type_PSU) which reads: > > In the US, IEC320 C14 plug",
"the one specified in the [Power Supply Documentation](http://reprap.org/wiki/Power_Supply#OEM_type_PSU) which reads: > > In",
"the input into my [OEM Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) via the black (hot - L),",
"wires. For the connecting wires I stripped a black PC Tower wire to",
"PC Tower wire to get at the black, white, and ground wires inside",
"to the house mains via a plug and wired just like in the",
"reads 10A 250V~ so I'm wondering if it's safe to use. The switch",
"it's safe to use. The switch will be connected to the house mains",
"thingiverse project](http://www.thingiverse.com/thing:31659), so it can be the input into my [OEM Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI)",
"which reads: > > In the US, IEC320 C14 plug connections are common,",
"I believe it's like the one specified in the [Power Supply Documentation](http://reprap.org/wiki/Power_Supply#OEM_type_PSU) which",
"so it can be the input into my [OEM Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) via the",
"the connecting wires I stripped a black PC Tower wire to get at",
"be connected to the house mains via a plug and wired just like",
"in the [this thingiverse project](http://www.thingiverse.com/thing:31659), so it can be the input into my",
"in [this thingiverse project](http://www.thingiverse.com/thing:31659). Inside the switch I've also added an F4AL250V fuse.",
"mains via a plug and wired just like in the [this thingiverse project](http://www.thingiverse.com/thing:31659),",
"me is, that the [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) on the back reads 10A 250V~",
"on the back reads 10A 250V~ so I'm wondering if it's safe to",
"switch I've also added an F4AL250V fuse. Now what's confusing me is, that",
"Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) via the black (hot - L), white (Common - N) and",
"intend to hook up with [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) I believe it's like the",
"- L), white (Common - N) and Green (Ground) wires. For the connecting",
"I've also seen where this was attached in [this thingiverse project](http://www.thingiverse.com/thing:31659). Inside the",
"to use. The switch will be connected to the house mains via a",
"I intend to hook up with [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) I believe it's like",
"use your > preferred standard. > > > I've also seen where this",
"F4AL250V fuse. Now what's confusing me is, that the [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) on",
"Now what's confusing me is, that the [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) on the back",
"will be connected to the house mains via a plug and wired just",
"also seen where this was attached in [this thingiverse project](http://www.thingiverse.com/thing:31659). Inside the switch",
"fuse. Now what's confusing me is, that the [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) on the",
"a black PC Tower wire to get at the black, white, and ground",
"> > In the US, IEC320 C14 plug connections are common, but use",
"to hook up with [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) I believe it's like the one",
"switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) I believe it's like the one specified in the [Power Supply Documentation](http://reprap.org/wiki/Power_Supply#OEM_type_PSU)",
"I ordered an [OEM Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and I intend to hook up with",
"the switch I've also added an F4AL250V fuse. Now what's confusing me is,",
"via a plug and wired just like in the [this thingiverse project](http://www.thingiverse.com/thing:31659), so",
"your > preferred standard. > > > I've also seen where this was",
"[this thingiverse project](http://www.thingiverse.com/thing:31659), so it can be the input into my [OEM Power",
"Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and I intend to hook up with [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) I",
"the [this thingiverse project](http://www.thingiverse.com/thing:31659), so it can be the input into my [OEM",
"is, that the [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) on the back reads 10A 250V~ so",
"this was attached in [this thingiverse project](http://www.thingiverse.com/thing:31659). Inside the switch I've also added",
"[this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) on the back reads 10A 250V~ so I'm wondering if",
"via the black (hot - L), white (Common - N) and Green (Ground)",
"seen where this was attached in [this thingiverse project](http://www.thingiverse.com/thing:31659). Inside the switch I've",
"The switch will be connected to the house mains via a plug and",
"10A 250V~ so I'm wondering if it's safe to use. The switch will",
"L), white (Common - N) and Green (Ground) wires. For the connecting wires",
"standard. > > > I've also seen where this was attached in [this",
"where this was attached in [this thingiverse project](http://www.thingiverse.com/thing:31659). Inside the switch I've also",
"IEC320 C14 plug connections are common, but use your > preferred standard. >",
"I'm wondering if it's safe to use. The switch will be connected to",
"input into my [OEM Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) via the black (hot - L), white",
"plug connections are common, but use your > preferred standard. > > >",
"I've also added an F4AL250V fuse. Now what's confusing me is, that the",
"what's confusing me is, that the [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) on the back reads",
"like the one specified in the [Power Supply Documentation](http://reprap.org/wiki/Power_Supply#OEM_type_PSU) which reads: > >",
"> preferred standard. > > > I've also seen where this was attached",
"I stripped a black PC Tower wire to get at the black, white,",
"into my [OEM Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) via the black (hot - L), white (Common",
"wondering if it's safe to use. The switch will be connected to the",
"ordered an [OEM Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and I intend to hook up with [this",
"[this thingiverse project](http://www.thingiverse.com/thing:31659). Inside the switch I've also added an F4AL250V fuse. Now",
"(Ground) wires. For the connecting wires I stripped a black PC Tower wire",
"also added an F4AL250V fuse. Now what's confusing me is, that the [this",
"C14 plug connections are common, but use your > preferred standard. > >",
"house mains via a plug and wired just like in the [this thingiverse",
"connected to the house mains via a plug and wired just like in",
"up with [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) I believe it's like the one specified in",
"in the [Power Supply Documentation](http://reprap.org/wiki/Power_Supply#OEM_type_PSU) which reads: > > In the US, IEC320",
"> > > I've also seen where this was attached in [this thingiverse",
"and I intend to hook up with [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) I believe it's",
"wire to get at the black, white, and ground wires inside it. <http://reprap.org/wiki/Power_Supply#OEM_type_PSU>",
"wired just like in the [this thingiverse project](http://www.thingiverse.com/thing:31659), so it can be the",
"the house mains via a plug and wired just like in the [this",
"rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) I believe it's like the one specified in the [Power Supply",
"stripped a black PC Tower wire to get at the black, white, and",
"with [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) I believe it's like the one specified in the",
"common, but use your > preferred standard. > > > I've also seen",
"so I'm wondering if it's safe to use. The switch will be connected",
"safe to use. The switch will be connected to the house mains via",
"> > I've also seen where this was attached in [this thingiverse project](http://www.thingiverse.com/thing:31659).",
"and Green (Ground) wires. For the connecting wires I stripped a black PC",
"back reads 10A 250V~ so I'm wondering if it's safe to use. The",
"hook up with [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) I believe it's like the one specified",
"attached in [this thingiverse project](http://www.thingiverse.com/thing:31659). Inside the switch I've also added an F4AL250V",
"white (Common - N) and Green (Ground) wires. For the connecting wires I",
"a plug and wired just like in the [this thingiverse project](http://www.thingiverse.com/thing:31659), so it",
"project](http://www.thingiverse.com/thing:31659). Inside the switch I've also added an F4AL250V fuse. Now what's confusing",
"Tower wire to get at the black, white, and ground wires inside it.",
"plug and wired just like in the [this thingiverse project](http://www.thingiverse.com/thing:31659), so it can",
"For the connecting wires I stripped a black PC Tower wire to get",
"[OEM Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and I intend to hook up with [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK)",
"the US, IEC320 C14 plug connections are common, but use your > preferred",
"connections are common, but use your > preferred standard. > > > I've",
"the back reads 10A 250V~ so I'm wondering if it's safe to use.",
"it's like the one specified in the [Power Supply Documentation](http://reprap.org/wiki/Power_Supply#OEM_type_PSU) which reads: >",
"are common, but use your > preferred standard. > > > I've also",
"switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) on the back reads 10A 250V~ so I'm wondering if it's safe",
"black (hot - L), white (Common - N) and Green (Ground) wires. For",
"an F4AL250V fuse. Now what's confusing me is, that the [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK)",
"US, IEC320 C14 plug connections are common, but use your > preferred standard.",
"preferred standard. > > > I've also seen where this was attached in",
"Green (Ground) wires. For the connecting wires I stripped a black PC Tower",
"specified in the [Power Supply Documentation](http://reprap.org/wiki/Power_Supply#OEM_type_PSU) which reads: > > In the US,",
"it can be the input into my [OEM Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) via the black",
"can be the input into my [OEM Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) via the black (hot",
"the [this rocker switch](http://rads.stackoverflow.com/amzn/click/B00511QVVK) on the back reads 10A 250V~ so I'm wondering",
"connecting wires I stripped a black PC Tower wire to get at the",
"my [OEM Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) via the black (hot - L), white (Common -",
"switch will be connected to the house mains via a plug and wired",
"use. The switch will be connected to the house mains via a plug",
"believe it's like the one specified in the [Power Supply Documentation](http://reprap.org/wiki/Power_Supply#OEM_type_PSU) which reads:",
"- N) and Green (Ground) wires. For the connecting wires I stripped a",
"the [Power Supply Documentation](http://reprap.org/wiki/Power_Supply#OEM_type_PSU) which reads: > > In the US, IEC320 C14",
"reads: > > In the US, IEC320 C14 plug connections are common, but",
"(Common - N) and Green (Ground) wires. For the connecting wires I stripped"
] |
[
"or where exposed to oil > at a temperature not exceeding 60°C or",
"> > > I'd like to be able to hook up RAMPs 1.4",
"Internal wiring of appliances; or where exposed to oil > at a temperature",
"is applicable.. > Tags may indicate the following: 600V Peak - For Electronic",
"at a temperature not exceeding 60°C or 80°C, whichever is applicable.. > Tags",
"80°C, whichever is applicable.. > Tags may indicate the following: 600V Peak -",
"Limitation: Internal wiring of appliances; or where exposed to oil > at a",
"may indicate the following: 600V Peak - For Electronic Use Only. > >",
"600V Peak - For Electronic Use Only. > > > I'd like to",
"appliances; or where exposed to oil > at a temperature not exceeding 60°C",
"> Use Limitation: Internal wiring of appliances; or where exposed to oil >",
"a temperature not exceeding 60°C or 80°C, whichever is applicable.. > Tags may",
"wire 22 Gauge Stranded Hookup Wire from Radio Shack: ``` Type/Style: AWM/1007 Wire",
"where exposed to oil > at a temperature not exceeding 60°C or 80°C,",
"from Radio Shack: ``` Type/Style: AWM/1007 Wire Gauge: 22 AWG Insulation Thickness: AVE.",
"Use Only. > > > I'd like to be able to hook up",
"to be able to hook up RAMPs 1.4 to my [switching power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI)",
"up RAMPs 1.4 to my [switching power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) with this wire. Will this",
"to hook up RAMPs 1.4 to my [switching power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) with this wire.",
"Shack: ``` Type/Style: AWM/1007 Wire Gauge: 22 AWG Insulation Thickness: AVE. 0.42 mm",
"Stranded Hookup Wire from Radio Shack: ``` Type/Style: AWM/1007 Wire Gauge: 22 AWG",
"> at a temperature not exceeding 60°C or 80°C, whichever is applicable.. >",
"Gauge: 22 AWG Insulation Thickness: AVE. 0.42 mm Rated Voltage: 300V Temperature Rating:",
"exceeding 60°C or 80°C, whichever is applicable.. > Tags may indicate the following:",
"of appliances; or where exposed to oil > at a temperature not exceeding",
"like to be able to hook up RAMPs 1.4 to my [switching power",
"- For Electronic Use Only. > > > I'd like to be able",
"0.42 mm Rated Voltage: 300V Temperature Rating: 80°C / 176°F ``` > >",
"> I'd like to be able to hook up RAMPs 1.4 to my",
"Insulation Thickness: AVE. 0.42 mm Rated Voltage: 300V Temperature Rating: 80°C / 176°F",
"80°C / 176°F ``` > > Use Limitation: Internal wiring of appliances; or",
"Thickness: AVE. 0.42 mm Rated Voltage: 300V Temperature Rating: 80°C / 176°F ```",
"Electronic Use Only. > > > I'd like to be able to hook",
"``` > > Use Limitation: Internal wiring of appliances; or where exposed to",
"> > I'd like to be able to hook up RAMPs 1.4 to",
"Rated Voltage: 300V Temperature Rating: 80°C / 176°F ``` > > Use Limitation:",
"indicate the following: 600V Peak - For Electronic Use Only. > > >",
"60°C or 80°C, whichever is applicable.. > Tags may indicate the following: 600V",
"not exceeding 60°C or 80°C, whichever is applicable.. > Tags may indicate the",
"22 AWG Insulation Thickness: AVE. 0.42 mm Rated Voltage: 300V Temperature Rating: 80°C",
"following wire 22 Gauge Stranded Hookup Wire from Radio Shack: ``` Type/Style: AWM/1007",
"or 80°C, whichever is applicable.. > Tags may indicate the following: 600V Peak",
"RAMPs 1.4 to my [switching power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) with this wire. Will this work",
"Rating: 80°C / 176°F ``` > > Use Limitation: Internal wiring of appliances;",
"following: 600V Peak - For Electronic Use Only. > > > I'd like",
"Gauge Stranded Hookup Wire from Radio Shack: ``` Type/Style: AWM/1007 Wire Gauge: 22",
"> > Use Limitation: Internal wiring of appliances; or where exposed to oil",
"hook up RAMPs 1.4 to my [switching power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) with this wire. Will",
"able to hook up RAMPs 1.4 to my [switching power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) with this",
"Peak - For Electronic Use Only. > > > I'd like to be",
"Only. > > > I'd like to be able to hook up RAMPs",
"Use Limitation: Internal wiring of appliances; or where exposed to oil > at",
"AWG Insulation Thickness: AVE. 0.42 mm Rated Voltage: 300V Temperature Rating: 80°C /",
"whichever is applicable.. > Tags may indicate the following: 600V Peak - For",
"Temperature Rating: 80°C / 176°F ``` > > Use Limitation: Internal wiring of",
"Hookup Wire from Radio Shack: ``` Type/Style: AWM/1007 Wire Gauge: 22 AWG Insulation",
"Type/Style: AWM/1007 Wire Gauge: 22 AWG Insulation Thickness: AVE. 0.42 mm Rated Voltage:",
"mm Rated Voltage: 300V Temperature Rating: 80°C / 176°F ``` > > Use",
"to oil > at a temperature not exceeding 60°C or 80°C, whichever is",
"the following: 600V Peak - For Electronic Use Only. > > > I'd",
"176°F ``` > > Use Limitation: Internal wiring of appliances; or where exposed",
"oil > at a temperature not exceeding 60°C or 80°C, whichever is applicable..",
"AVE. 0.42 mm Rated Voltage: 300V Temperature Rating: 80°C / 176°F ``` >",
"temperature not exceeding 60°C or 80°C, whichever is applicable.. > Tags may indicate",
"obtained the following wire 22 Gauge Stranded Hookup Wire from Radio Shack: ```",
"/ 176°F ``` > > Use Limitation: Internal wiring of appliances; or where",
"AWM/1007 Wire Gauge: 22 AWG Insulation Thickness: AVE. 0.42 mm Rated Voltage: 300V",
"I'd like to be able to hook up RAMPs 1.4 to my [switching",
"wiring of appliances; or where exposed to oil > at a temperature not",
"300V Temperature Rating: 80°C / 176°F ``` > > Use Limitation: Internal wiring",
"I obtained the following wire 22 Gauge Stranded Hookup Wire from Radio Shack:",
"Radio Shack: ``` Type/Style: AWM/1007 Wire Gauge: 22 AWG Insulation Thickness: AVE. 0.42",
"For Electronic Use Only. > > > I'd like to be able to",
"applicable.. > Tags may indicate the following: 600V Peak - For Electronic Use",
"22 Gauge Stranded Hookup Wire from Radio Shack: ``` Type/Style: AWM/1007 Wire Gauge:",
"``` Type/Style: AWM/1007 Wire Gauge: 22 AWG Insulation Thickness: AVE. 0.42 mm Rated",
"> Tags may indicate the following: 600V Peak - For Electronic Use Only.",
"Voltage: 300V Temperature Rating: 80°C / 176°F ``` > > Use Limitation: Internal",
"Tags may indicate the following: 600V Peak - For Electronic Use Only. >",
"1.4 to my [switching power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) with this wire. Will this work okay?",
"Wire Gauge: 22 AWG Insulation Thickness: AVE. 0.42 mm Rated Voltage: 300V Temperature",
"be able to hook up RAMPs 1.4 to my [switching power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) with",
"Wire from Radio Shack: ``` Type/Style: AWM/1007 Wire Gauge: 22 AWG Insulation Thickness:",
"exposed to oil > at a temperature not exceeding 60°C or 80°C, whichever",
"the following wire 22 Gauge Stranded Hookup Wire from Radio Shack: ``` Type/Style:"
] |
[
"folger tech off of ebay. I've built it and even printed out a",
"up the x carriage. I don't know if I got a bad nut,",
"the z motor to push up the x carriage. I don't know if",
"or is it's just supposed to be this way? I thought it was",
"could notice that seemed to be loose was that nut that allows the",
"friction)? So does it need to be that way? Or could I get",
"seemed to be loose was that nut that allows the z motor to",
"I put my finger lightly on the plastic part of the x-carriage I",
"that part of the printer and examined everything and all I could notice",
"took apart that part of the printer and examined everything and all I",
"noticed that a lot of noise seemed to be happening only while the",
"if I got a bad nut, or a bad screw, or is it's",
"lightly on the plastic part of the x-carriage I could dampen the vibrations",
"allows the z motor to push up the x carriage. I don't know",
"nut? Or is there some better way to go about fixing this issue?",
"So I bought a prusa i3 kit from a company called folger tech",
"to push up the x carriage. I don't know if I got a",
"does it need to be that way? Or could I get a different",
"nut, or a bad screw, or is it's just supposed to be this",
"notice that seemed to be loose was that nut that allows the z",
"with a screw turning a nut, because I thought that it would bind",
"to be that way? Or could I get a different nut? Or is",
"pretty much eliminate the noise I noticed. Then I took apart that part",
"a different nut? Or is there some better way to go about fixing",
"all I could notice that seemed to be loose was that nut that",
"to go about fixing this issue? Or perhaps it's not even an issue..",
"a bad screw, or is it's just supposed to be this way? I",
"bad nut, or a bad screw, or is it's just supposed to be",
"that is why it was so loose fitting (to reduce friction)? So does",
"x-carriage I could dampen the vibrations and pretty much eliminate the noise I",
"loose was that nut that allows the z motor to push up the",
"don't know if I got a bad nut, or a bad screw, or",
"thought it was kind of a weird way to build things with a",
"noticed. Then I took apart that part of the printer and examined everything",
"But now I'm wondering if that is why it was so loose fitting",
"kit from a company called folger tech off of ebay. I've built it",
"plastic part of the x-carriage I could dampen the vibrations and pretty much",
"to be happening only while the x-axis motor was moving the extruder. Then",
"kind of a weird way to build things with a screw turning a",
"I got a bad nut, or a bad screw, or is it's just",
"only while the x-axis motor was moving the extruder. Then I noticed if",
"it was so loose fitting (to reduce friction)? So does it need to",
"noise seemed to be happening only while the x-axis motor was moving the",
"tech off of ebay. I've built it and even printed out a few",
"the x-carriage I could dampen the vibrations and pretty much eliminate the noise",
"now I'm wondering if that is why it was so loose fitting (to",
"wondering if that is why it was so loose fitting (to reduce friction)?",
"I get a different nut? Or is there some better way to go",
"I thought it was kind of a weird way to build things with",
"if that is why it was so loose fitting (to reduce friction)? So",
"the x-axis motor was moving the extruder. Then I noticed if I put",
"I took apart that part of the printer and examined everything and all",
"examined everything and all I could notice that seemed to be loose was",
"and all I could notice that seemed to be loose was that nut",
"Or is there some better way to go about fixing this issue? Or",
"is it's just supposed to be this way? I thought it was kind",
"bind up. But now I'm wondering if that is why it was so",
"even printed out a few parts, but I noticed that a lot of",
"I could notice that seemed to be loose was that nut that allows",
"vibrations and pretty much eliminate the noise I noticed. Then I took apart",
"my finger lightly on the plastic part of the x-carriage I could dampen",
"supposed to be this way? I thought it was kind of a weird",
"was so loose fitting (to reduce friction)? So does it need to be",
"is there some better way to go about fixing this issue? Or perhaps",
"to be this way? I thought it was kind of a weird way",
"put my finger lightly on the plastic part of the x-carriage I could",
"a weird way to build things with a screw turning a nut, because",
"Then I took apart that part of the printer and examined everything and",
"know if I got a bad nut, or a bad screw, or is",
"be loose was that nut that allows the z motor to push up",
"eliminate the noise I noticed. Then I took apart that part of the",
"I'm wondering if that is why it was so loose fitting (to reduce",
"weird way to build things with a screw turning a nut, because I",
"I bought a prusa i3 kit from a company called folger tech off",
"is why it was so loose fitting (to reduce friction)? So does it",
"or a bad screw, or is it's just supposed to be this way?",
"So does it need to be that way? Or could I get a",
"could I get a different nut? Or is there some better way to",
"to be loose was that nut that allows the z motor to push",
"why it was so loose fitting (to reduce friction)? So does it need",
"a few parts, but I noticed that a lot of noise seemed to",
"a lot of noise seemed to be happening only while the x-axis motor",
"seemed to be happening only while the x-axis motor was moving the extruder.",
"that nut that allows the z motor to push up the x carriage.",
"ebay. I've built it and even printed out a few parts, but I",
"z motor to push up the x carriage. I don't know if I",
"got a bad nut, or a bad screw, or is it's just supposed",
"I thought that it would bind up. But now I'm wondering if that",
"thought that it would bind up. But now I'm wondering if that is",
"reduce friction)? So does it need to be that way? Or could I",
"get a different nut? Or is there some better way to go about",
"the vibrations and pretty much eliminate the noise I noticed. Then I took",
"was kind of a weird way to build things with a screw turning",
"happening only while the x-axis motor was moving the extruder. Then I noticed",
"it and even printed out a few parts, but I noticed that a",
"I noticed if I put my finger lightly on the plastic part of",
"everything and all I could notice that seemed to be loose was that",
"off of ebay. I've built it and even printed out a few parts,",
"a screw turning a nut, because I thought that it would bind up.",
"built it and even printed out a few parts, but I noticed that",
"that it would bind up. But now I'm wondering if that is why",
"better way to go about fixing this issue? Or perhaps it's not even",
"carriage. I don't know if I got a bad nut, or a bad",
"prusa i3 kit from a company called folger tech off of ebay. I've",
"company called folger tech off of ebay. I've built it and even printed",
"way? I thought it was kind of a weird way to build things",
"Then I noticed if I put my finger lightly on the plastic part",
"called folger tech off of ebay. I've built it and even printed out",
"could dampen the vibrations and pretty much eliminate the noise I noticed. Then",
"I've built it and even printed out a few parts, but I noticed",
"noise I noticed. Then I took apart that part of the printer and",
"up. But now I'm wondering if that is why it was so loose",
"and even printed out a few parts, but I noticed that a lot",
"way to build things with a screw turning a nut, because I thought",
"to build things with a screw turning a nut, because I thought that",
"because I thought that it would bind up. But now I'm wondering if",
"out a few parts, but I noticed that a lot of noise seemed",
"some better way to go about fixing this issue? Or perhaps it's not",
"screw, or is it's just supposed to be this way? I thought it",
"I could dampen the vibrations and pretty much eliminate the noise I noticed.",
"few parts, but I noticed that a lot of noise seemed to be",
"lot of noise seemed to be happening only while the x-axis motor was",
"and pretty much eliminate the noise I noticed. Then I took apart that",
"of the printer and examined everything and all I could notice that seemed",
"would bind up. But now I'm wondering if that is why it was",
"be that way? Or could I get a different nut? Or is there",
"while the x-axis motor was moving the extruder. Then I noticed if I",
"bought a prusa i3 kit from a company called folger tech off of",
"bad screw, or is it's just supposed to be this way? I thought",
"i3 kit from a company called folger tech off of ebay. I've built",
"part of the printer and examined everything and all I could notice that",
"a bad nut, or a bad screw, or is it's just supposed to",
"(to reduce friction)? So does it need to be that way? Or could",
"it would bind up. But now I'm wondering if that is why it",
"that allows the z motor to push up the x carriage. I don't",
"loose fitting (to reduce friction)? So does it need to be that way?",
"be happening only while the x-axis motor was moving the extruder. Then I",
"way to go about fixing this issue? Or perhaps it's not even an",
"a nut, because I thought that it would bind up. But now I'm",
"much eliminate the noise I noticed. Then I took apart that part of",
"the extruder. Then I noticed if I put my finger lightly on the",
"build things with a screw turning a nut, because I thought that it",
"noticed if I put my finger lightly on the plastic part of the",
"finger lightly on the plastic part of the x-carriage I could dampen the",
"printer and examined everything and all I could notice that seemed to be",
"that seemed to be loose was that nut that allows the z motor",
"motor was moving the extruder. Then I noticed if I put my finger",
"there some better way to go about fixing this issue? Or perhaps it's",
"x-axis motor was moving the extruder. Then I noticed if I put my",
"part of the x-carriage I could dampen the vibrations and pretty much eliminate",
"Or could I get a different nut? Or is there some better way",
"the printer and examined everything and all I could notice that seemed to",
"be this way? I thought it was kind of a weird way to",
"of the x-carriage I could dampen the vibrations and pretty much eliminate the",
"was that nut that allows the z motor to push up the x",
"but I noticed that a lot of noise seemed to be happening only",
"on the plastic part of the x-carriage I could dampen the vibrations and",
"a company called folger tech off of ebay. I've built it and even",
"apart that part of the printer and examined everything and all I could",
"moving the extruder. Then I noticed if I put my finger lightly on",
"if I put my finger lightly on the plastic part of the x-carriage",
"I noticed. Then I took apart that part of the printer and examined",
"I noticed that a lot of noise seemed to be happening only while",
"from a company called folger tech off of ebay. I've built it and",
"nut that allows the z motor to push up the x carriage. I",
"just supposed to be this way? I thought it was kind of a",
"that way? Or could I get a different nut? Or is there some",
"screw turning a nut, because I thought that it would bind up. But",
"a prusa i3 kit from a company called folger tech off of ebay.",
"motor to push up the x carriage. I don't know if I got",
"that a lot of noise seemed to be happening only while the x-axis",
"this way? I thought it was kind of a weird way to build",
"nut, because I thought that it would bind up. But now I'm wondering",
"of noise seemed to be happening only while the x-axis motor was moving",
"things with a screw turning a nut, because I thought that it would",
"it was kind of a weird way to build things with a screw",
"of a weird way to build things with a screw turning a nut,",
"extruder. Then I noticed if I put my finger lightly on the plastic",
"was moving the extruder. Then I noticed if I put my finger lightly",
"x carriage. I don't know if I got a bad nut, or a",
"it's just supposed to be this way? I thought it was kind of",
"fitting (to reduce friction)? So does it need to be that way? Or",
"parts, but I noticed that a lot of noise seemed to be happening",
"so loose fitting (to reduce friction)? So does it need to be that",
"dampen the vibrations and pretty much eliminate the noise I noticed. Then I",
"and examined everything and all I could notice that seemed to be loose",
"need to be that way? Or could I get a different nut? Or",
"turning a nut, because I thought that it would bind up. But now",
"different nut? Or is there some better way to go about fixing this",
"it need to be that way? Or could I get a different nut?",
"the noise I noticed. Then I took apart that part of the printer",
"the x carriage. I don't know if I got a bad nut, or",
"go about fixing this issue? Or perhaps it's not even an issue.. idk.",
"push up the x carriage. I don't know if I got a bad",
"I don't know if I got a bad nut, or a bad screw,",
"way? Or could I get a different nut? Or is there some better",
"the plastic part of the x-carriage I could dampen the vibrations and pretty",
"printed out a few parts, but I noticed that a lot of noise",
"of ebay. I've built it and even printed out a few parts, but"
] |
[
"am I doing wrong here?[Triffid Hunters Calibration](http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide) is the guide I have been",
"98 When I did my first measurements I used 120mm as the mark",
"less accurate it gets. What am I doing wrong here?[Triffid Hunters Calibration](http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide) is",
"Then the new measurement was some where around 80 some MM. It seams",
"extruded 100mm then remeasured the mark it was 37.66. Then by using the",
"z axis and everything works fine there. However when I went to do",
"another measurement, the new measurement was 61.27mm after marking 120mm then extruding 100mm",
"the new measurement was 61.27mm after marking 120mm then extruding 100mm of filament.",
"that I took another measurement, the new measurement was 61.27mm after marking 120mm",
"for the x, y, and z axis and everything works fine there. However",
"and this link is to the specifications to the printer [HE3D Prusa XI3](https://www.3dprintersonlinestore.com/reprap-prusa-xi3).",
"x, y, and z axis and everything works fine there. However when I",
"wrong here?[Triffid Hunters Calibration](http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide) is the guide I have been using and this",
"a little weird. The original number programmed on the board for the step",
"number programmed on the board for the step per mm was 98 When",
"120mm as the mark on the filament then extruded 100mm then remeasured the",
"per mm was 98 When I did my first measurements I used 120mm",
"the new measurement was some where around 80 some MM. It seams that",
"the formula it came out to be 202.6540. Then the new measurement was",
"Hunters Calibration](http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide) is the guide I have been using and this link is",
"mark it was 37.66. Then by using the new\\_e\\_steps = old\\_e\\_steps \\* (100/(120-distance).",
"some MM. It seams that the more I do the calibration the less",
"there. However when I went to do the calibration for extruder things got",
"use the new number and upload it to the printer which was 119.0187.",
"the mark it was 37.66. Then by using the new\\_e\\_steps = old\\_e\\_steps \\*",
"out to be 202.6540. Then the new measurement was some where around 80",
"for extruder things got a little weird. The original number programmed on the",
"Using the formula it came out to be 202.6540. Then the new measurement",
"marking 120mm then extruding 100mm of filament. Using the formula it came out",
"However when I went to do the calibration for extruder things got a",
"filament. Using the formula it came out to be 202.6540. Then the new",
"using and this link is to the specifications to the printer [HE3D Prusa",
"number and upload it to the printer which was 119.0187. After that I",
"using the new\\_e\\_steps = old\\_e\\_steps \\* (100/(120-distance). I would use the new number",
"and z axis and everything works fine there. However when I went to",
"some where around 80 some MM. It seams that the more I do",
"went to do the calibration for extruder things got a little weird. The",
"guide I have been using and this link is to the specifications to",
"Then by using the new\\_e\\_steps = old\\_e\\_steps \\* (100/(120-distance). I would use the",
"100mm then remeasured the mark it was 37.66. Then by using the new\\_e\\_steps",
"measurement was some where around 80 some MM. It seams that the more",
"the calibration for extruder things got a little weird. The original number programmed",
"to be 202.6540. Then the new measurement was some where around 80 some",
"the calibration the less accurate it gets. What am I doing wrong here?[Triffid",
"as the mark on the filament then extruded 100mm then remeasured the mark",
"I took another measurement, the new measurement was 61.27mm after marking 120mm then",
"remeasured the mark it was 37.66. Then by using the new\\_e\\_steps = old\\_e\\_steps",
"the x, y, and z axis and everything works fine there. However when",
"the calibration for the x, y, and z axis and everything works fine",
"I went to do the calibration for extruder things got a little weird.",
"it to the printer which was 119.0187. After that I took another measurement,",
"it came out to be 202.6540. Then the new measurement was some where",
"I have done the calibration for the x, y, and z axis and",
"doing wrong here?[Triffid Hunters Calibration](http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide) is the guide I have been using and",
"37.66. Then by using the new\\_e\\_steps = old\\_e\\_steps \\* (100/(120-distance). I would use",
"then extruding 100mm of filament. Using the formula it came out to be",
"was 61.27mm after marking 120mm then extruding 100mm of filament. Using the formula",
"What am I doing wrong here?[Triffid Hunters Calibration](http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide) is the guide I have",
"when I went to do the calibration for extruder things got a little",
"took another measurement, the new measurement was 61.27mm after marking 120mm then extruding",
"of filament. Using the formula it came out to be 202.6540. Then the",
"the new\\_e\\_steps = old\\_e\\_steps \\* (100/(120-distance). I would use the new number and",
"the printer which was 119.0187. After that I took another measurement, the new",
"upload it to the printer which was 119.0187. After that I took another",
"weird. The original number programmed on the board for the step per mm",
"It seams that the more I do the calibration the less accurate it",
"do the calibration the less accurate it gets. What am I doing wrong",
"printer which was 119.0187. After that I took another measurement, the new measurement",
"more I do the calibration the less accurate it gets. What am I",
"the new number and upload it to the printer which was 119.0187. After",
"the guide I have been using and this link is to the specifications",
"new number and upload it to the printer which was 119.0187. After that",
"120mm then extruding 100mm of filament. Using the formula it came out to",
"119.0187. After that I took another measurement, the new measurement was 61.27mm after",
"on the filament then extruded 100mm then remeasured the mark it was 37.66.",
"by using the new\\_e\\_steps = old\\_e\\_steps \\* (100/(120-distance). I would use the new",
"measurement was 61.27mm after marking 120mm then extruding 100mm of filament. Using the",
"been using and this link is to the specifications to the printer [HE3D",
"I would use the new number and upload it to the printer which",
"which was 119.0187. After that I took another measurement, the new measurement was",
"then extruded 100mm then remeasured the mark it was 37.66. Then by using",
"where around 80 some MM. It seams that the more I do the",
"I have been using and this link is to the specifications to the",
"things got a little weird. The original number programmed on the board for",
"202.6540. Then the new measurement was some where around 80 some MM. It",
"calibration for extruder things got a little weird. The original number programmed on",
"100mm of filament. Using the formula it came out to be 202.6540. Then",
"programmed on the board for the step per mm was 98 When I",
"new measurement was some where around 80 some MM. It seams that the",
"(100/(120-distance). I would use the new number and upload it to the printer",
"around 80 some MM. It seams that the more I do the calibration",
"calibration for the x, y, and z axis and everything works fine there.",
"and everything works fine there. However when I went to do the calibration",
"did my first measurements I used 120mm as the mark on the filament",
"came out to be 202.6540. Then the new measurement was some where around",
"\\* (100/(120-distance). I would use the new number and upload it to the",
"accurate it gets. What am I doing wrong here?[Triffid Hunters Calibration](http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide) is the",
"seams that the more I do the calibration the less accurate it gets.",
"extruder things got a little weird. The original number programmed on the board",
"my first measurements I used 120mm as the mark on the filament then",
"After that I took another measurement, the new measurement was 61.27mm after marking",
"board for the step per mm was 98 When I did my first",
"got a little weird. The original number programmed on the board for the",
"mark on the filament then extruded 100mm then remeasured the mark it was",
"= old\\_e\\_steps \\* (100/(120-distance). I would use the new number and upload it",
"I doing wrong here?[Triffid Hunters Calibration](http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide) is the guide I have been using",
"works fine there. However when I went to do the calibration for extruder",
"formula it came out to be 202.6540. Then the new measurement was some",
"gets. What am I doing wrong here?[Triffid Hunters Calibration](http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide) is the guide I",
"have been using and this link is to the specifications to the printer",
"When I did my first measurements I used 120mm as the mark on",
"I do the calibration the less accurate it gets. What am I doing",
"MM. It seams that the more I do the calibration the less accurate",
"axis and everything works fine there. However when I went to do the",
"here?[Triffid Hunters Calibration](http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide) is the guide I have been using and this link",
"calibration the less accurate it gets. What am I doing wrong here?[Triffid Hunters",
"old\\_e\\_steps \\* (100/(120-distance). I would use the new number and upload it to",
"mm was 98 When I did my first measurements I used 120mm as",
"was 98 When I did my first measurements I used 120mm as the",
"it was 37.66. Then by using the new\\_e\\_steps = old\\_e\\_steps \\* (100/(120-distance). I",
"was 119.0187. After that I took another measurement, the new measurement was 61.27mm",
"it gets. What am I doing wrong here?[Triffid Hunters Calibration](http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide) is the guide",
"measurement, the new measurement was 61.27mm after marking 120mm then extruding 100mm of",
"the less accurate it gets. What am I doing wrong here?[Triffid Hunters Calibration](http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide)",
"used 120mm as the mark on the filament then extruded 100mm then remeasured",
"The original number programmed on the board for the step per mm was",
"was some where around 80 some MM. It seams that the more I",
"that the more I do the calibration the less accurate it gets. What",
"is the guide I have been using and this link is to the",
"to do the calibration for extruder things got a little weird. The original",
"measurements I used 120mm as the mark on the filament then extruded 100mm",
"to the printer which was 119.0187. After that I took another measurement, the",
"the more I do the calibration the less accurate it gets. What am",
"the step per mm was 98 When I did my first measurements I",
"new measurement was 61.27mm after marking 120mm then extruding 100mm of filament. Using",
"extruding 100mm of filament. Using the formula it came out to be 202.6540.",
"have done the calibration for the x, y, and z axis and everything",
"I did my first measurements I used 120mm as the mark on the",
"61.27mm after marking 120mm then extruding 100mm of filament. Using the formula it",
"the board for the step per mm was 98 When I did my",
"be 202.6540. Then the new measurement was some where around 80 some MM.",
"I used 120mm as the mark on the filament then extruded 100mm then",
"done the calibration for the x, y, and z axis and everything works",
"the mark on the filament then extruded 100mm then remeasured the mark it",
"then remeasured the mark it was 37.66. Then by using the new\\_e\\_steps =",
"little weird. The original number programmed on the board for the step per",
"and upload it to the printer which was 119.0187. After that I took",
"the filament then extruded 100mm then remeasured the mark it was 37.66. Then",
"was 37.66. Then by using the new\\_e\\_steps = old\\_e\\_steps \\* (100/(120-distance). I would",
"y, and z axis and everything works fine there. However when I went",
"Calibration](http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide) is the guide I have been using and this link is to",
"original number programmed on the board for the step per mm was 98",
"for the step per mm was 98 When I did my first measurements",
"do the calibration for extruder things got a little weird. The original number",
"first measurements I used 120mm as the mark on the filament then extruded",
"fine there. However when I went to do the calibration for extruder things",
"new\\_e\\_steps = old\\_e\\_steps \\* (100/(120-distance). I would use the new number and upload",
"would use the new number and upload it to the printer which was",
"filament then extruded 100mm then remeasured the mark it was 37.66. Then by",
"after marking 120mm then extruding 100mm of filament. Using the formula it came",
"step per mm was 98 When I did my first measurements I used",
"everything works fine there. However when I went to do the calibration for",
"80 some MM. It seams that the more I do the calibration the",
"on the board for the step per mm was 98 When I did"
] |
[
"board storing the firmware degrades a little, each time you write to it.",
"this point I'm just wondering if an expert might see this and relieve",
"electrons. The electric field of the > trapped electrons adds to the electrons",
"of my head that electrically programmable ROM like what must be on the",
"how many times I can do that. Well, once I remembered the acronym",
"acronym \"EEPROM\", and after a little googling, I came across this, [Arduino -",
"makes a difference. Also I believe the Arduino is a Mega 2560. I",
"to worry about how many times I can do that. Well, once I",
"I'm starting to worry about how many times I can do that. Well,",
"and > endurance failure occurs. The manufacturers usually specify the > maximum number",
"already done several times. So I'm starting to worry about how many times",
"I'm onto the answer, but the problem is I'm not sure if a",
"an entire file being uploaded? Wouldn't it be a single blip of data?",
"gate may > drift through the insulator, especially at increased temperature, and >",
"uploaded? Wouldn't it be a single blip of data? And if so how",
"a cycle is an entire file being uploaded? Wouldn't it be a single",
"surprised if I've uploaded to it more than 2000 times > > >",
"rewrites being 1 million or more.[5] > > > During storage, the electrons",
"that it can handle 100k cycles, so I think I'm onto the answer,",
"electric field of the > trapped electrons adds to the electrons in the",
"the difference becomes too small > to be recognizable, the cell is stuck",
"times. So I'm starting to worry about how many times I can do",
"injected into the floating gate may > drift through the insulator, especially at",
"Tech Prusa i3 kit, if that makes a difference. Also I believe the",
"remembered the acronym \"EEPROM\", and after a little googling, I came across this,",
"reverting the cell into erased state. The > manufacturers usually guarantee data retention",
"little googling, I came across this, [Arduino - EEPROM](https://www.arduino.cc/en/Reference/EEPROMWrite), which says that it",
"I've already done several times. So I'm starting to worry about how many",
"indicating that the answer might be as low as 2000. Also, this: >",
"the firmware degrades a little, each time you write to it. Right now",
"but I'd be very surprised if I've uploaded to it more than 2000",
"Wikipedia: [EEPROM - Failure Modes](https://en.wikipedia.org/wiki/EEPROM#Failure_modes), indicating the answer might be into the millions.",
"the electrons injected into the floating gate may > drift through the insulator,",
"> **Failure modes** > > > There are two limitations of stored information;",
"> > > There are two limitations of stored information; endurance, and data",
"into erased state. The > manufacturers usually guarantee data retention of 10 years",
"the > trapped electrons adds to the electrons in the floating gate, lowering",
"in the back of my head that electrically programmable ROM like what must",
"found this: > > but I'd be very surprised if I've uploaded to",
"the Arduino board storing the firmware degrades a little, each time you write",
"sufficient number of rewrite cycles, the difference becomes too small > to be",
"if a cycle is an entire file being uploaded? Wouldn't it be a",
"- Failure Modes](https://en.wikipedia.org/wiki/EEPROM#Failure_modes), indicating the answer might be into the millions. At this",
"not detected, DFU failing](http://forum.arduino.cc/index.php?topic=58243.0), indicating that the answer might be as low as",
"away another print problem, and I think I need to modify the firmware",
"all I'm working with a Folger Tech Prusa i3 kit, if that makes",
"million or more.[5] > > > During storage, the electrons injected into the",
"cause charge loss, reverting the cell into erased state. The > manufacturers usually",
"difference. Also I believe the Arduino is a Mega 2560. I know somewhere",
"file consume? I also found this: > > but I'd be very surprised",
"maximum number of rewrites being 1 million or more.[5] > > > During",
"the problem is I'm not sure if a cycle is an entire file",
"answer might be as low as 2000. Also, this: > > **Failure modes**",
"that the answer might be as low as 2000. Also, this: > >",
"as low as 2000. Also, this: > > **Failure modes** > > >",
"There are two limitations of stored information; endurance, and data > retention. >",
"information; endurance, and data > retention. > > > During rewrites, the gate",
"can do that. Well, once I remembered the acronym \"EEPROM\", and after a",
"> on [Mega2560 bricked? not detected, DFU failing](http://forum.arduino.cc/index.php?topic=58243.0), indicating that the answer might",
"how many cycles would the average Marlin file consume? I also found this:",
"than 2000 times > > > on [Mega2560 bricked? not detected, DFU failing](http://forum.arduino.cc/index.php?topic=58243.0),",
"Also, this: > > **Failure modes** > > > There are two limitations",
"a little googling, I came across this, [Arduino - EEPROM](https://www.arduino.cc/en/Reference/EEPROMWrite), which says that",
"to be recognizable, the cell is stuck in programmed state, and > endurance",
"electrons in the floating gate, lowering > the window between threshold voltages for",
"do that. Well, once I remembered the acronym \"EEPROM\", and after a little",
"> trapped electrons adds to the electrons in the floating gate, lowering >",
"the floating gate may > drift through the insulator, especially at increased temperature,",
"or more.[5] > > > During storage, the electrons injected into the floating",
"be on the Arduino board storing the firmware degrades a little, each time",
"> > During storage, the electrons injected into the floating gate may >",
"endurance failure occurs. The manufacturers usually specify the > maximum number of rewrites",
"it. Right now I'm trying to calibrate away another print problem, and I",
"> retention. > > > During rewrites, the gate oxide in the floating-gate",
"the answer might be as low as 2000. Also, this: > > **Failure",
"onto the answer, but the problem is I'm not sure if a cycle",
"At this point I'm just wondering if an expert might see this and",
"i3 kit, if that makes a difference. Also I believe the Arduino is",
"becomes too small > to be recognizable, the cell is stuck in programmed",
"would the average Marlin file consume? I also found this: > > but",
"I need to modify the firmware yet again, which I've already done several",
"and I think I need to modify the firmware yet again, which I've",
"more.[5] > > > During storage, the electrons injected into the floating gate",
"that. Well, once I remembered the acronym \"EEPROM\", and after a little googling,",
"yet again, which I've already done several times. So I'm starting to worry",
"this: > > but I'd be very surprised if I've uploaded to it",
"state. The > manufacturers usually guarantee data retention of 10 years or more.[6]",
"you write to it. Right now I'm trying to calibrate away another print",
"ROM like what must be on the Arduino board storing the firmware degrades",
"the answer, but the problem is I'm not sure if a cycle is",
"in programmed state, and > endurance failure occurs. The manufacturers usually specify the",
"on the Arduino board storing the firmware degrades a little, each time you",
"I'm working with a Folger Tech Prusa i3 kit, if that makes a",
"trapped electrons adds to the electrons in the floating gate, lowering > the",
"\"EEPROM\", and after a little googling, I came across this, [Arduino - EEPROM](https://www.arduino.cc/en/Reference/EEPROMWrite),",
"problem, and I think I need to modify the firmware yet again, which",
"1 million or more.[5] > > > During storage, the electrons injected into",
"may > drift through the insulator, especially at increased temperature, and > cause",
"which says that it can handle 100k cycles, so I think I'm onto",
"I think I need to modify the firmware yet again, which I've already",
"about how many times I can do that. Well, once I remembered the",
"programmable ROM like what must be on the Arduino board storing the firmware",
"floating gate may > drift through the insulator, especially at increased temperature, and",
"accumulates trapped electrons. The electric field of the > trapped electrons adds to",
"to it. Right now I'm trying to calibrate away another print problem, and",
"answer, but the problem is I'm not sure if a cycle is an",
"zeros vs ones. After > sufficient number of rewrite cycles, the difference becomes",
"> maximum number of rewrites being 1 million or more.[5] > > >",
"not sure if a cycle is an entire file being uploaded? Wouldn't it",
"the window between threshold voltages for zeros vs ones. After > sufficient number",
"which I've already done several times. So I'm starting to worry about how",
"> > > During storage, the electrons injected into the floating gate may",
"So I'm starting to worry about how many times I can do that.",
"usually guarantee data retention of 10 years or more.[6] > > > from",
"rewrite cycles, the difference becomes too small > to be recognizable, the cell",
"into the millions. At this point I'm just wondering if an expert might",
"I'm not sure if a cycle is an entire file being uploaded? Wouldn't",
"I also found this: > > but I'd be very surprised if I've",
"the floating gate, lowering > the window between threshold voltages for zeros vs",
"data retention of 10 years or more.[6] > > > from Wikipedia: [EEPROM",
"cell is stuck in programmed state, and > endurance failure occurs. The manufacturers",
"[EEPROM - Failure Modes](https://en.wikipedia.org/wiki/EEPROM#Failure_modes), indicating the answer might be into the millions. At",
"head that electrically programmable ROM like what must be on the Arduino board",
"handle 100k cycles, so I think I'm onto the answer, but the problem",
"window between threshold voltages for zeros vs ones. After > sufficient number of",
"storing the firmware degrades a little, each time you write to it. Right",
"> sufficient number of rewrite cycles, the difference becomes too small > to",
"endurance, and data > retention. > > > During rewrites, the gate oxide",
"from Wikipedia: [EEPROM - Failure Modes](https://en.wikipedia.org/wiki/EEPROM#Failure_modes), indicating the answer might be into the",
"of 10 years or more.[6] > > > from Wikipedia: [EEPROM - Failure",
"bricked? not detected, DFU failing](http://forum.arduino.cc/index.php?topic=58243.0), indicating that the answer might be as low",
"be a single blip of data? And if so how many cycles would",
"> cause charge loss, reverting the cell into erased state. The > manufacturers",
"floating gate, lowering > the window between threshold voltages for zeros vs ones.",
"it be a single blip of data? And if so how many cycles",
"each time you write to it. Right now I'm trying to calibrate away",
"I believe the Arduino is a Mega 2560. I know somewhere in the",
"> > > During rewrites, the gate oxide in the floating-gate transistors >",
"electrons injected into the floating gate may > drift through the insulator, especially",
"might be as low as 2000. Also, this: > > **Failure modes** >",
"> to be recognizable, the cell is stuck in programmed state, and >",
"Prusa i3 kit, if that makes a difference. Also I believe the Arduino",
"blip of data? And if so how many cycles would the average Marlin",
"to modify the firmware yet again, which I've already done several times. So",
"a Mega 2560. I know somewhere in the back of my head that",
"a difference. Also I believe the Arduino is a Mega 2560. I know",
"manufacturers usually specify the > maximum number of rewrites being 1 million or",
"voltages for zeros vs ones. After > sufficient number of rewrite cycles, the",
"is stuck in programmed state, and > endurance failure occurs. The manufacturers usually",
"degrades a little, each time you write to it. Right now I'm trying",
"> from Wikipedia: [EEPROM - Failure Modes](https://en.wikipedia.org/wiki/EEPROM#Failure_modes), indicating the answer might be into",
"to it more than 2000 times > > > on [Mega2560 bricked? not",
"number of rewrites being 1 million or more.[5] > > > During storage,",
"temperature, and > cause charge loss, reverting the cell into erased state. The",
"especially at increased temperature, and > cause charge loss, reverting the cell into",
"modes** > > > There are two limitations of stored information; endurance, and",
"but the problem is I'm not sure if a cycle is an entire",
"like what must be on the Arduino board storing the firmware degrades a",
"Right now I'm trying to calibrate away another print problem, and I think",
"of rewrite cycles, the difference becomes too small > to be recognizable, the",
"is a Mega 2560. I know somewhere in the back of my head",
"after a little googling, I came across this, [Arduino - EEPROM](https://www.arduino.cc/en/Reference/EEPROMWrite), which says",
"be recognizable, the cell is stuck in programmed state, and > endurance failure",
"print problem, and I think I need to modify the firmware yet again,",
"single blip of data? And if so how many cycles would the average",
"difference becomes too small > to be recognizable, the cell is stuck in",
"100k cycles, so I think I'm onto the answer, but the problem is",
"being uploaded? Wouldn't it be a single blip of data? And if so",
"low as 2000. Also, this: > > **Failure modes** > > > There",
"> > > from Wikipedia: [EEPROM - Failure Modes](https://en.wikipedia.org/wiki/EEPROM#Failure_modes), indicating the answer might",
"I think I'm onto the answer, but the problem is I'm not sure",
"10 years or more.[6] > > > from Wikipedia: [EEPROM - Failure Modes](https://en.wikipedia.org/wiki/EEPROM#Failure_modes),",
"in the floating-gate transistors > gradually accumulates trapped electrons. The electric field of",
"cycles, the difference becomes too small > to be recognizable, the cell is",
"it can handle 100k cycles, so I think I'm onto the answer, but",
"I'd be very surprised if I've uploaded to it more than 2000 times",
"Wouldn't it be a single blip of data? And if so how many",
"somewhere in the back of my head that electrically programmable ROM like what",
"average Marlin file consume? I also found this: > > but I'd be",
"millions. At this point I'm just wondering if an expert might see this",
"if that makes a difference. Also I believe the Arduino is a Mega",
"it more than 2000 times > > > on [Mega2560 bricked? not detected,",
"Well, once I remembered the acronym \"EEPROM\", and after a little googling, I",
"I can do that. Well, once I remembered the acronym \"EEPROM\", and after",
"> > > on [Mega2560 bricked? not detected, DFU failing](http://forum.arduino.cc/index.php?topic=58243.0), indicating that the",
"small > to be recognizable, the cell is stuck in programmed state, and",
"firmware yet again, which I've already done several times. So I'm starting to",
"this, [Arduino - EEPROM](https://www.arduino.cc/en/Reference/EEPROMWrite), which says that it can handle 100k cycles, so",
"the firmware yet again, which I've already done several times. So I'm starting",
"be as low as 2000. Also, this: > > **Failure modes** > >",
"the > maximum number of rewrites being 1 million or more.[5] > >",
"being 1 million or more.[5] > > > During storage, the electrons injected",
"another print problem, and I think I need to modify the firmware yet",
"again, which I've already done several times. So I'm starting to worry about",
"> > **Failure modes** > > > There are two limitations of stored",
"erased state. The > manufacturers usually guarantee data retention of 10 years or",
"> > on [Mega2560 bricked? not detected, DFU failing](http://forum.arduino.cc/index.php?topic=58243.0), indicating that the answer",
"know somewhere in the back of my head that electrically programmable ROM like",
"the floating-gate transistors > gradually accumulates trapped electrons. The electric field of the",
"Marlin file consume? I also found this: > > but I'd be very",
"> but I'd be very surprised if I've uploaded to it more than",
"Modes](https://en.wikipedia.org/wiki/EEPROM#Failure_modes), indicating the answer might be into the millions. At this point I'm",
"I came across this, [Arduino - EEPROM](https://www.arduino.cc/en/Reference/EEPROMWrite), which says that it can handle",
"starting to worry about how many times I can do that. Well, once",
"field of the > trapped electrons adds to the electrons in the floating",
"> > During rewrites, the gate oxide in the floating-gate transistors > gradually",
"two limitations of stored information; endurance, and data > retention. > > >",
"so I think I'm onto the answer, but the problem is I'm not",
"think I need to modify the firmware yet again, which I've already done",
"consume? I also found this: > > but I'd be very surprised if",
"time you write to it. Right now I'm trying to calibrate away another",
"the acronym \"EEPROM\", and after a little googling, I came across this, [Arduino",
"cell into erased state. The > manufacturers usually guarantee data retention of 10",
"floating-gate transistors > gradually accumulates trapped electrons. The electric field of the >",
"I remembered the acronym \"EEPROM\", and after a little googling, I came across",
"> > There are two limitations of stored information; endurance, and data >",
"trying to calibrate away another print problem, and I think I need to",
"be very surprised if I've uploaded to it more than 2000 times >",
"gradually accumulates trapped electrons. The electric field of the > trapped electrons adds",
"gate, lowering > the window between threshold voltages for zeros vs ones. After",
"believe the Arduino is a Mega 2560. I know somewhere in the back",
"years or more.[6] > > > from Wikipedia: [EEPROM - Failure Modes](https://en.wikipedia.org/wiki/EEPROM#Failure_modes), indicating",
"working with a Folger Tech Prusa i3 kit, if that makes a difference.",
"failing](http://forum.arduino.cc/index.php?topic=58243.0), indicating that the answer might be as low as 2000. Also, this:",
"very surprised if I've uploaded to it more than 2000 times > >",
"file being uploaded? Wouldn't it be a single blip of data? And if",
"a Folger Tech Prusa i3 kit, if that makes a difference. Also I",
"[Arduino - EEPROM](https://www.arduino.cc/en/Reference/EEPROMWrite), which says that it can handle 100k cycles, so I",
"I'm just wondering if an expert might see this and relieve my angst...",
"done several times. So I'm starting to worry about how many times I",
"the answer might be into the millions. At this point I'm just wondering",
"for zeros vs ones. After > sufficient number of rewrite cycles, the difference",
"> > from Wikipedia: [EEPROM - Failure Modes](https://en.wikipedia.org/wiki/EEPROM#Failure_modes), indicating the answer might be",
"**Failure modes** > > > There are two limitations of stored information; endurance,",
"now I'm trying to calibrate away another print problem, and I think I",
"stuck in programmed state, and > endurance failure occurs. The manufacturers usually specify",
"the average Marlin file consume? I also found this: > > but I'd",
"of rewrites being 1 million or more.[5] > > > During storage, the",
"the electrons in the floating gate, lowering > the window between threshold voltages",
"in the floating gate, lowering > the window between threshold voltages for zeros",
"indicating the answer might be into the millions. At this point I'm just",
"adds to the electrons in the floating gate, lowering > the window between",
"times I can do that. Well, once I remembered the acronym \"EEPROM\", and",
"the cell is stuck in programmed state, and > endurance failure occurs. The",
"> > but I'd be very surprised if I've uploaded to it more",
"of all I'm working with a Folger Tech Prusa i3 kit, if that",
"through the insulator, especially at increased temperature, and > cause charge loss, reverting",
"and > cause charge loss, reverting the cell into erased state. The >",
"detected, DFU failing](http://forum.arduino.cc/index.php?topic=58243.0), indicating that the answer might be as low as 2000.",
"> the window between threshold voltages for zeros vs ones. After > sufficient",
"failure occurs. The manufacturers usually specify the > maximum number of rewrites being",
"insulator, especially at increased temperature, and > cause charge loss, reverting the cell",
"of data? And if so how many cycles would the average Marlin file",
"must be on the Arduino board storing the firmware degrades a little, each",
"- EEPROM](https://www.arduino.cc/en/Reference/EEPROMWrite), which says that it can handle 100k cycles, so I think",
"between threshold voltages for zeros vs ones. After > sufficient number of rewrite",
"googling, I came across this, [Arduino - EEPROM](https://www.arduino.cc/en/Reference/EEPROMWrite), which says that it can",
"electrons adds to the electrons in the floating gate, lowering > the window",
"the gate oxide in the floating-gate transistors > gradually accumulates trapped electrons. The",
"came across this, [Arduino - EEPROM](https://www.arduino.cc/en/Reference/EEPROMWrite), which says that it can handle 100k",
"across this, [Arduino - EEPROM](https://www.arduino.cc/en/Reference/EEPROMWrite), which says that it can handle 100k cycles,",
"recognizable, the cell is stuck in programmed state, and > endurance failure occurs.",
"increased temperature, and > cause charge loss, reverting the cell into erased state.",
"gate oxide in the floating-gate transistors > gradually accumulates trapped electrons. The electric",
"lowering > the window between threshold voltages for zeros vs ones. After >",
"Failure Modes](https://en.wikipedia.org/wiki/EEPROM#Failure_modes), indicating the answer might be into the millions. At this point",
"cycles would the average Marlin file consume? I also found this: > >",
"of stored information; endurance, and data > retention. > > > During rewrites,",
"be into the millions. At this point I'm just wondering if an expert",
"DFU failing](http://forum.arduino.cc/index.php?topic=58243.0), indicating that the answer might be as low as 2000. Also,",
"the Arduino is a Mega 2560. I know somewhere in the back of",
"modify the firmware yet again, which I've already done several times. So I'm",
"data > retention. > > > During rewrites, the gate oxide in the",
"Folger Tech Prusa i3 kit, if that makes a difference. Also I believe",
"calibrate away another print problem, and I think I need to modify the",
"The manufacturers usually specify the > maximum number of rewrites being 1 million",
"if so how many cycles would the average Marlin file consume? I also",
"many times I can do that. Well, once I remembered the acronym \"EEPROM\",",
"back of my head that electrically programmable ROM like what must be on",
"2000 times > > > on [Mega2560 bricked? not detected, DFU failing](http://forum.arduino.cc/index.php?topic=58243.0), indicating",
"times > > > on [Mega2560 bricked? not detected, DFU failing](http://forum.arduino.cc/index.php?topic=58243.0), indicating that",
"storage, the electrons injected into the floating gate may > drift through the",
"> endurance failure occurs. The manufacturers usually specify the > maximum number of",
"During rewrites, the gate oxide in the floating-gate transistors > gradually accumulates trapped",
"First of all I'm working with a Folger Tech Prusa i3 kit, if",
"oxide in the floating-gate transistors > gradually accumulates trapped electrons. The electric field",
"Also I believe the Arduino is a Mega 2560. I know somewhere in",
"uploaded to it more than 2000 times > > > on [Mega2560 bricked?",
"electrically programmable ROM like what must be on the Arduino board storing the",
"my head that electrically programmable ROM like what must be on the Arduino",
"and after a little googling, I came across this, [Arduino - EEPROM](https://www.arduino.cc/en/Reference/EEPROMWrite), which",
"cycles, so I think I'm onto the answer, but the problem is I'm",
"that electrically programmable ROM like what must be on the Arduino board storing",
"the back of my head that electrically programmable ROM like what must be",
"EEPROM](https://www.arduino.cc/en/Reference/EEPROMWrite), which says that it can handle 100k cycles, so I think I'm",
"the cell into erased state. The > manufacturers usually guarantee data retention of",
"that makes a difference. Also I believe the Arduino is a Mega 2560.",
"programmed state, and > endurance failure occurs. The manufacturers usually specify the >",
"or more.[6] > > > from Wikipedia: [EEPROM - Failure Modes](https://en.wikipedia.org/wiki/EEPROM#Failure_modes), indicating the",
"2560. I know somewhere in the back of my head that electrically programmable",
"ones. After > sufficient number of rewrite cycles, the difference becomes too small",
"vs ones. After > sufficient number of rewrite cycles, the difference becomes too",
"I'm trying to calibrate away another print problem, and I think I need",
"might be into the millions. At this point I'm just wondering if an",
"what must be on the Arduino board storing the firmware degrades a little,",
"loss, reverting the cell into erased state. The > manufacturers usually guarantee data",
"to calibrate away another print problem, and I think I need to modify",
"many cycles would the average Marlin file consume? I also found this: >",
"also found this: > > but I'd be very surprised if I've uploaded",
"a little, each time you write to it. Right now I'm trying to",
"data? And if so how many cycles would the average Marlin file consume?",
"several times. So I'm starting to worry about how many times I can",
"> manufacturers usually guarantee data retention of 10 years or more.[6] > >",
"if I've uploaded to it more than 2000 times > > > on",
"entire file being uploaded? Wouldn't it be a single blip of data? And",
"point I'm just wondering if an expert might see this and relieve my",
"once I remembered the acronym \"EEPROM\", and after a little googling, I came",
"so how many cycles would the average Marlin file consume? I also found",
"The > manufacturers usually guarantee data retention of 10 years or more.[6] >",
"kit, if that makes a difference. Also I believe the Arduino is a",
"think I'm onto the answer, but the problem is I'm not sure if",
"[Mega2560 bricked? not detected, DFU failing](http://forum.arduino.cc/index.php?topic=58243.0), indicating that the answer might be as",
"The electric field of the > trapped electrons adds to the electrons in",
"charge loss, reverting the cell into erased state. The > manufacturers usually guarantee",
"the insulator, especially at increased temperature, and > cause charge loss, reverting the",
"to the electrons in the floating gate, lowering > the window between threshold",
"problem is I'm not sure if a cycle is an entire file being",
"state, and > endurance failure occurs. The manufacturers usually specify the > maximum",
"is an entire file being uploaded? Wouldn't it be a single blip of",
"is I'm not sure if a cycle is an entire file being uploaded?",
"worry about how many times I can do that. Well, once I remembered",
"transistors > gradually accumulates trapped electrons. The electric field of the > trapped",
"sure if a cycle is an entire file being uploaded? Wouldn't it be",
"I've uploaded to it more than 2000 times > > > on [Mega2560",
"firmware degrades a little, each time you write to it. Right now I'm",
"> During storage, the electrons injected into the floating gate may > drift",
"rewrites, the gate oxide in the floating-gate transistors > gradually accumulates trapped electrons.",
"as 2000. Also, this: > > **Failure modes** > > > There are",
"of the > trapped electrons adds to the electrons in the floating gate,",
"answer might be into the millions. At this point I'm just wondering if",
"the millions. At this point I'm just wondering if an expert might see",
"I know somewhere in the back of my head that electrically programmable ROM",
"During storage, the electrons injected into the floating gate may > drift through",
"> There are two limitations of stored information; endurance, and data > retention.",
"trapped electrons. The electric field of the > trapped electrons adds to the",
"> gradually accumulates trapped electrons. The electric field of the > trapped electrons",
"And if so how many cycles would the average Marlin file consume? I",
"Mega 2560. I know somewhere in the back of my head that electrically",
"write to it. Right now I'm trying to calibrate away another print problem,",
"threshold voltages for zeros vs ones. After > sufficient number of rewrite cycles,",
"retention. > > > During rewrites, the gate oxide in the floating-gate transistors",
"on [Mega2560 bricked? not detected, DFU failing](http://forum.arduino.cc/index.php?topic=58243.0), indicating that the answer might be",
"After > sufficient number of rewrite cycles, the difference becomes too small >",
"more than 2000 times > > > on [Mega2560 bricked? not detected, DFU",
"stored information; endurance, and data > retention. > > > During rewrites, the",
"occurs. The manufacturers usually specify the > maximum number of rewrites being 1",
"retention of 10 years or more.[6] > > > from Wikipedia: [EEPROM -",
"need to modify the firmware yet again, which I've already done several times.",
"guarantee data retention of 10 years or more.[6] > > > from Wikipedia:",
"too small > to be recognizable, the cell is stuck in programmed state,",
"usually specify the > maximum number of rewrites being 1 million or more.[5]",
"Arduino is a Mega 2560. I know somewhere in the back of my",
"drift through the insulator, especially at increased temperature, and > cause charge loss,",
"limitations of stored information; endurance, and data > retention. > > > During",
"this: > > **Failure modes** > > > There are two limitations of",
"number of rewrite cycles, the difference becomes too small > to be recognizable,",
"> During rewrites, the gate oxide in the floating-gate transistors > gradually accumulates",
"> drift through the insulator, especially at increased temperature, and > cause charge",
"cycle is an entire file being uploaded? Wouldn't it be a single blip",
"can handle 100k cycles, so I think I'm onto the answer, but the",
"little, each time you write to it. Right now I'm trying to calibrate",
"with a Folger Tech Prusa i3 kit, if that makes a difference. Also",
"says that it can handle 100k cycles, so I think I'm onto the",
"2000. Also, this: > > **Failure modes** > > > There are two",
"Arduino board storing the firmware degrades a little, each time you write to",
"manufacturers usually guarantee data retention of 10 years or more.[6] > > >",
"are two limitations of stored information; endurance, and data > retention. > >",
"more.[6] > > > from Wikipedia: [EEPROM - Failure Modes](https://en.wikipedia.org/wiki/EEPROM#Failure_modes), indicating the answer",
"at increased temperature, and > cause charge loss, reverting the cell into erased",
"and data > retention. > > > During rewrites, the gate oxide in",
"into the floating gate may > drift through the insulator, especially at increased",
"a single blip of data? And if so how many cycles would the",
"specify the > maximum number of rewrites being 1 million or more.[5] >"
] |
[
"is likely to cause issues. > > > I have retraction set to",
"the slack. Is the 2 mm a conservative rating (I guess they don't",
"problems) or is it really the maximum? Is there anything else I can",
"and blobs. My printer is set up with a relatively long Bowden tube",
"clogging problems) or is it really the maximum? Is there anything else I",
"> Excessively long retractions will cause issues by dragging soft filament into cold",
"mm). I wonder if I need to push my retraction setting slightly beyond",
"a conservative rating (I guess they don't want dissatisfied customers with clogging problems)",
"will cause issues by dragging soft filament into cold areas. [...] for bowden",
"push my retraction setting slightly beyond 2 mm to take up some of",
"customers with clogging problems) or is it really the maximum? Is there anything",
"(500-600 mm). I wonder if I need to push my retraction setting slightly",
"the 2 mm a conservative rating (I guess they don't want dissatisfied customers",
"retractions will cause issues by dragging soft filament into cold areas. [...] for",
"else I can do to improve retraction performance? (I already have a small",
"wiki](http://wiki.e3d-online.com/wiki/E3D-v6_Assembly#Usage_Guidance): > > Excessively long retractions will cause issues by dragging soft filament",
"cause issues. > > > I have retraction set to the recommended maximum",
"on their [own wiki](http://wiki.e3d-online.com/wiki/E3D-v6_Assembly#Usage_Guidance): > > Excessively long retractions will cause issues by",
"or is it really the maximum? Is there anything else I can do",
"of the slack. Is the 2 mm a conservative rating (I guess they",
"set up with a relatively long Bowden tube (500-600 mm). I wonder if",
"mm, but I still get a lot of stringing and blobs. My printer",
"retraction setting slightly beyond 2 mm to take up some of the slack.",
"is it really the maximum? Is there anything else I can do to",
"I still get a lot of stringing and blobs. My printer is set",
"to the recommended maximum of 2 mm, but I still get a lot",
"if I need to push my retraction setting slightly beyond 2 mm to",
"slightly beyond 2 mm to take up some of the slack. Is the",
"beyond 2 mm is likely to cause issues. > > > I have",
"with clogging problems) or is it really the maximum? Is there anything else",
"stringing and blobs. My printer is set up with a relatively long Bowden",
"cause issues by dragging soft filament into cold areas. [...] for bowden systems",
"filament into cold areas. [...] for bowden systems you might want to go",
"the recommended maximum of 2 mm, but I still get a lot of",
"but I still get a lot of stringing and blobs. My printer is",
"2 mm is likely to cause issues. > > > I have retraction",
"a relatively long Bowden tube (500-600 mm). I wonder if I need to",
"mm is likely to cause issues. > > > I have retraction set",
"of stringing and blobs. My printer is set up with a relatively long",
"I can do to improve retraction performance? (I already have a small coasting",
"with a relatively long Bowden tube (500-600 mm). I wonder if I need",
"my retraction setting slightly beyond 2 mm to take up some of the",
"go up to 2 mm. Retraction beyond 2 mm is likely to cause",
"of 2 mm, but I still get a lot of stringing and blobs.",
"2 mm to take up some of the slack. Is the 2 mm",
"still get a lot of stringing and blobs. My printer is set up",
"the maximum? Is there anything else I can do to improve retraction performance?",
"is set up with a relatively long Bowden tube (500-600 mm). I wonder",
"soft filament into cold areas. [...] for bowden systems you might want to",
"Bowden tube (500-600 mm). I wonder if I need to push my retraction",
"dragging soft filament into cold areas. [...] for bowden systems you might want",
"mm a conservative rating (I guess they don't want dissatisfied customers with clogging",
"they don't want dissatisfied customers with clogging problems) or is it really the",
"to go up to 2 mm. Retraction beyond 2 mm is likely to",
"some of the slack. Is the 2 mm a conservative rating (I guess",
"slack. Is the 2 mm a conservative rating (I guess they don't want",
"lot of stringing and blobs. My printer is set up with a relatively",
"recommended maximum of 2 mm, but I still get a lot of stringing",
"E3D mentions on their [own wiki](http://wiki.e3d-online.com/wiki/E3D-v6_Assembly#Usage_Guidance): > > Excessively long retractions will cause",
"guess they don't want dissatisfied customers with clogging problems) or is it really",
"Excessively long retractions will cause issues by dragging soft filament into cold areas.",
"cold areas. [...] for bowden systems you might want to go up to",
"printer is set up with a relatively long Bowden tube (500-600 mm). I",
"2 mm. Retraction beyond 2 mm is likely to cause issues. > >",
"[own wiki](http://wiki.e3d-online.com/wiki/E3D-v6_Assembly#Usage_Guidance): > > Excessively long retractions will cause issues by dragging soft",
"into cold areas. [...] for bowden systems you might want to go up",
"> > > I have retraction set to the recommended maximum of 2",
"setting slightly beyond 2 mm to take up some of the slack. Is",
"do to improve retraction performance? (I already have a small coasting distance of",
"set to the recommended maximum of 2 mm, but I still get a",
"take up some of the slack. Is the 2 mm a conservative rating",
"to cause issues. > > > I have retraction set to the recommended",
"relatively long Bowden tube (500-600 mm). I wonder if I need to push",
"maximum? Is there anything else I can do to improve retraction performance? (I",
"to improve retraction performance? (I already have a small coasting distance of 0.1",
"need to push my retraction setting slightly beyond 2 mm to take up",
"up some of the slack. Is the 2 mm a conservative rating (I",
"blobs. My printer is set up with a relatively long Bowden tube (500-600",
"2 mm a conservative rating (I guess they don't want dissatisfied customers with",
"get a lot of stringing and blobs. My printer is set up with",
"I need to push my retraction setting slightly beyond 2 mm to take",
"areas. [...] for bowden systems you might want to go up to 2",
"don't want dissatisfied customers with clogging problems) or is it really the maximum?",
"it really the maximum? Is there anything else I can do to improve",
"up to 2 mm. Retraction beyond 2 mm is likely to cause issues.",
"mentions on their [own wiki](http://wiki.e3d-online.com/wiki/E3D-v6_Assembly#Usage_Guidance): > > Excessively long retractions will cause issues",
"[...] for bowden systems you might want to go up to 2 mm.",
"tube (500-600 mm). I wonder if I need to push my retraction setting",
"> I have retraction set to the recommended maximum of 2 mm, but",
"Retraction beyond 2 mm is likely to cause issues. > > > I",
"Is the 2 mm a conservative rating (I guess they don't want dissatisfied",
"mm. Retraction beyond 2 mm is likely to cause issues. > > >",
"systems you might want to go up to 2 mm. Retraction beyond 2",
"dissatisfied customers with clogging problems) or is it really the maximum? Is there",
"want dissatisfied customers with clogging problems) or is it really the maximum? Is",
"to push my retraction setting slightly beyond 2 mm to take up some",
"you might want to go up to 2 mm. Retraction beyond 2 mm",
"I have retraction set to the recommended maximum of 2 mm, but I",
"(I guess they don't want dissatisfied customers with clogging problems) or is it",
"up with a relatively long Bowden tube (500-600 mm). I wonder if I",
"issues by dragging soft filament into cold areas. [...] for bowden systems you",
"retraction performance? (I already have a small coasting distance of 0.1 mm set.)",
"2 mm, but I still get a lot of stringing and blobs. My",
"a lot of stringing and blobs. My printer is set up with a",
"by dragging soft filament into cold areas. [...] for bowden systems you might",
"really the maximum? Is there anything else I can do to improve retraction",
"improve retraction performance? (I already have a small coasting distance of 0.1 mm",
"have retraction set to the recommended maximum of 2 mm, but I still",
"to take up some of the slack. Is the 2 mm a conservative",
"retraction set to the recommended maximum of 2 mm, but I still get",
"for bowden systems you might want to go up to 2 mm. Retraction",
"I wonder if I need to push my retraction setting slightly beyond 2",
"their [own wiki](http://wiki.e3d-online.com/wiki/E3D-v6_Assembly#Usage_Guidance): > > Excessively long retractions will cause issues by dragging",
"long retractions will cause issues by dragging soft filament into cold areas. [...]",
"My printer is set up with a relatively long Bowden tube (500-600 mm).",
"issues. > > > I have retraction set to the recommended maximum of",
"long Bowden tube (500-600 mm). I wonder if I need to push my",
"want to go up to 2 mm. Retraction beyond 2 mm is likely",
"> > Excessively long retractions will cause issues by dragging soft filament into",
"beyond 2 mm to take up some of the slack. Is the 2",
"conservative rating (I guess they don't want dissatisfied customers with clogging problems) or",
"Is there anything else I can do to improve retraction performance? (I already",
"there anything else I can do to improve retraction performance? (I already have",
"bowden systems you might want to go up to 2 mm. Retraction beyond",
"can do to improve retraction performance? (I already have a small coasting distance",
"likely to cause issues. > > > I have retraction set to the",
"anything else I can do to improve retraction performance? (I already have a",
"to 2 mm. Retraction beyond 2 mm is likely to cause issues. >",
"maximum of 2 mm, but I still get a lot of stringing and",
"wonder if I need to push my retraction setting slightly beyond 2 mm",
"might want to go up to 2 mm. Retraction beyond 2 mm is",
"mm to take up some of the slack. Is the 2 mm a",
"rating (I guess they don't want dissatisfied customers with clogging problems) or is",
"> > I have retraction set to the recommended maximum of 2 mm,"
] |
[
"on Thingiverse). Is this a software issue (Simplify3D) or a hardware issue? Can",
"direction on separate runs of the same piece (which is just a poker",
"direction and in the negative Y direction on separate runs of the same",
"is just a poker chip I found on Thingiverse). Is this a software",
"Can anybody suggest a fix? See the following photos: [](https://i.stack.imgur.com/b9Kyv.jpg) [](https://i.stack.imgur.com/b9Kyv.jpg) [](https://i.stack.imgur.com/b9Kyv.jpg) [](https://i.stack.imgur.com/b9Kyv.jpg)",
"(which is just a poker chip I found on Thingiverse). Is this a",
"issue? Can anybody suggest a fix? See the following photos: [](https://i.stack.imgur.com/b9Kyv.jpg) [](https://i.stack.imgur.com/b9Kyv.jpg) [](https://i.stack.imgur.com/b9Kyv.jpg) [](https://i.stack.imgur.com/b9Kyv.jpg) [](https://i.stack.imgur.com/b9Kyv.jpg) [](https://i.stack.imgur.com/1yH40.jpg)",
"of the same piece (which is just a poker chip I found on",
"by 2-3 centimeters. I cannot pinpoint how or why it is doing this.",
"I am encountering a problem with this ID3 printer using ABS -- at",
"(Simplify3D) or a hardware issue? Can anybody suggest a fix? See the following",
"displaces on the y-axis by 2-3 centimeters. I cannot pinpoint how or why",
"in the positive Y direction and in the negative Y direction on separate",
"why it is doing this. It has displaced in the positive Y direction",
"a software issue (Simplify3D) or a hardware issue? Can anybody suggest a fix?",
"runs of the same piece (which is just a poker chip I found",
"piece (which is just a poker chip I found on Thingiverse). Is this",
"the same piece (which is just a poker chip I found on Thingiverse).",
"hardware issue? Can anybody suggest a fix? See the following photos: [](https://i.stack.imgur.com/b9Kyv.jpg) [](https://i.stack.imgur.com/b9Kyv.jpg) [![Close up of 3D print",
"centimeters. I cannot pinpoint how or why it is doing this. It has",
"found on Thingiverse). Is this a software issue (Simplify3D) or a hardware issue?",
"head displaces on the y-axis by 2-3 centimeters. I cannot pinpoint how or",
"in the negative Y direction on separate runs of the same piece (which",
"software issue (Simplify3D) or a hardware issue? Can anybody suggest a fix? See",
"print the print head displaces on the y-axis by 2-3 centimeters. I cannot",
"at some point during the print the print head displaces on the y-axis"
] |
[
"I have noticed that once in a while stepper motor jumps back for",
"feeder of my UM2. Inspecting it I have noticed that once in a",
"while stepper motor jumps back for few steps. I have an idea of",
"a while stepper motor jumps back for few steps. I have an idea",
"want to hear what you can think of. That is the video of",
"started to come from feeder of my UM2. Inspecting it I have noticed",
"think of. That is the video of feeder during the printing :) <https://youtu.be/z6CzudMOeD0>",
"I just want to hear what you can think of. That is the",
"what you can think of. That is the video of feeder during the",
"noticed that once in a while stepper motor jumps back for few steps.",
"the ticking sounds started to come from feeder of my UM2. Inspecting it",
"what can be the reason, but I just want to hear what you",
"you can think of. That is the video of feeder during the printing",
"That is the video of feeder during the printing :) <https://youtu.be/z6CzudMOeD0> First tick",
"the video of feeder during the printing :) <https://youtu.be/z6CzudMOeD0> First tick at 10sec",
"just want to hear what you can think of. That is the video",
"of what can be the reason, but I just want to hear what",
"steps. I have an idea of what can be the reason, but I",
"of my UM2. Inspecting it I have noticed that once in a while",
"but I just want to hear what you can think of. That is",
"idea of what can be the reason, but I just want to hear",
"back for few steps. I have an idea of what can be the",
"the reason, but I just want to hear what you can think of.",
"of. That is the video of feeder during the printing :) <https://youtu.be/z6CzudMOeD0> First",
"my UM2. Inspecting it I have noticed that once in a while stepper",
"ticking sounds started to come from feeder of my UM2. Inspecting it I",
"Recently, the ticking sounds started to come from feeder of my UM2. Inspecting",
"I have an idea of what can be the reason, but I just",
"have noticed that once in a while stepper motor jumps back for few",
"to hear what you can think of. That is the video of feeder",
"to come from feeder of my UM2. Inspecting it I have noticed that",
"from feeder of my UM2. Inspecting it I have noticed that once in",
"in a while stepper motor jumps back for few steps. I have an",
"for few steps. I have an idea of what can be the reason,",
"it I have noticed that once in a while stepper motor jumps back",
"stepper motor jumps back for few steps. I have an idea of what",
"can think of. That is the video of feeder during the printing :)",
"come from feeder of my UM2. Inspecting it I have noticed that once",
"UM2. Inspecting it I have noticed that once in a while stepper motor",
"hear what you can think of. That is the video of feeder during",
"motor jumps back for few steps. I have an idea of what can",
"jumps back for few steps. I have an idea of what can be",
"can be the reason, but I just want to hear what you can",
"be the reason, but I just want to hear what you can think",
"reason, but I just want to hear what you can think of. That",
"an idea of what can be the reason, but I just want to",
"have an idea of what can be the reason, but I just want",
"sounds started to come from feeder of my UM2. Inspecting it I have",
"Inspecting it I have noticed that once in a while stepper motor jumps",
"few steps. I have an idea of what can be the reason, but",
"is the video of feeder during the printing :) <https://youtu.be/z6CzudMOeD0> First tick at",
"once in a while stepper motor jumps back for few steps. I have",
"that once in a while stepper motor jumps back for few steps. I"
] |
[
"have to take to get from pellets to a full spool of filament.",
"factories that produce filament have to take to get from pellets to a",
"to get from pellets to a full spool of filament. Which of these",
"in the production process that factories that produce filament have to take to",
"Which of these steps are critical for quality (thickness, roundness, long shelf life,..)",
"full spool of filament. Which of these steps are critical for quality (thickness,",
"production process that factories that produce filament have to take to get from",
"steps in the production process that factories that produce filament have to take",
"filament. Which of these steps are critical for quality (thickness, roundness, long shelf",
"pellets to a full spool of filament. Which of these steps are critical",
"a full spool of filament. Which of these steps are critical for quality",
"process that factories that produce filament have to take to get from pellets",
"of these steps are critical for quality (thickness, roundness, long shelf life,..) ?",
"to a full spool of filament. Which of these steps are critical for",
"are the steps in the production process that factories that produce filament have",
"spool of filament. Which of these steps are critical for quality (thickness, roundness,",
"from pellets to a full spool of filament. Which of these steps are",
"What are the steps in the production process that factories that produce filament",
"to take to get from pellets to a full spool of filament. Which",
"that produce filament have to take to get from pellets to a full",
"take to get from pellets to a full spool of filament. Which of",
"the production process that factories that produce filament have to take to get",
"of filament. Which of these steps are critical for quality (thickness, roundness, long",
"the steps in the production process that factories that produce filament have to",
"get from pellets to a full spool of filament. Which of these steps",
"that factories that produce filament have to take to get from pellets to",
"filament have to take to get from pellets to a full spool of",
"produce filament have to take to get from pellets to a full spool"
] |
[
"have a long 8 mm smooth steel rod of about 55 cm long.",
"This rods bend easily due to the length. If I replace them with",
"Will the bearings wear off the carbon fiber rod? I couldn't find too",
"8mm solid carbon fiber rods, will the bending reduce? Will the bearings wear",
"solid carbon fiber rods, will the bending reduce? Will the bearings wear off",
"55 cm long. This rods bend easily due to the length. If I",
"to the length. If I replace them with 8mm solid carbon fiber rods,",
"the length. If I replace them with 8mm solid carbon fiber rods, will",
"If I replace them with 8mm solid carbon fiber rods, will the bending",
"rods, will the bending reduce? Will the bearings wear off the carbon fiber",
"wear off the carbon fiber rod? I couldn't find too much information about",
"long 8 mm smooth steel rod of about 55 cm long. This rods",
"bend easily due to the length. If I replace them with 8mm solid",
"fiber rods, will the bending reduce? Will the bearings wear off the carbon",
"off the carbon fiber rod? I couldn't find too much information about this.",
"I have a long 8 mm smooth steel rod of about 55 cm",
"mm smooth steel rod of about 55 cm long. This rods bend easily",
"the bearings wear off the carbon fiber rod? I couldn't find too much",
"bending reduce? Will the bearings wear off the carbon fiber rod? I couldn't",
"steel rod of about 55 cm long. This rods bend easily due to",
"rods bend easily due to the length. If I replace them with 8mm",
"8 mm smooth steel rod of about 55 cm long. This rods bend",
"about 55 cm long. This rods bend easily due to the length. If",
"of about 55 cm long. This rods bend easily due to the length.",
"smooth steel rod of about 55 cm long. This rods bend easily due",
"length. If I replace them with 8mm solid carbon fiber rods, will the",
"long. This rods bend easily due to the length. If I replace them",
"carbon fiber rods, will the bending reduce? Will the bearings wear off the",
"them with 8mm solid carbon fiber rods, will the bending reduce? Will the",
"cm long. This rods bend easily due to the length. If I replace",
"with 8mm solid carbon fiber rods, will the bending reduce? Will the bearings",
"replace them with 8mm solid carbon fiber rods, will the bending reduce? Will",
"the bending reduce? Will the bearings wear off the carbon fiber rod? I",
"reduce? Will the bearings wear off the carbon fiber rod? I couldn't find",
"a long 8 mm smooth steel rod of about 55 cm long. This",
"will the bending reduce? Will the bearings wear off the carbon fiber rod?",
"due to the length. If I replace them with 8mm solid carbon fiber",
"rod of about 55 cm long. This rods bend easily due to the",
"I replace them with 8mm solid carbon fiber rods, will the bending reduce?",
"bearings wear off the carbon fiber rod? I couldn't find too much information",
"easily due to the length. If I replace them with 8mm solid carbon"
] |
[
"bearings, if anything at all, - grease on the 'more fluid' side for",
"sinter bearings, if anything at all, - grease on the 'more fluid' side",
"but not only, written here <http://reprap.org/wiki/Lubrication>, I know that one should: - use",
"have the slightest idea about lubricants, I would not know what to actually",
"unify this or at least only use two lubricants? I do not have",
"- use machine oil for sinter bearings, if anything at all, - grease",
"UM2) Is there a way to unify this or at least only use",
"this or at least only use two lubricants? I do not have the",
"be machine oil and low viscosity grease. Do you have specific recommendations of",
"slightest idea about lubricants, I would not know what to actually buy if",
"example provided by the Ultimaker UM2) Is there a way to unify this",
"LM8UU bearings/threaded rods for the z-axis and bronze sinter bushings on the x-",
"fluid' side for the linear bearings so that the lubricant stays eqally with",
"bearings so that the lubricant stays eqally with balls on the upper and",
"oil and low viscosity grease. Do you have specific recommendations of what to",
"lubricant stays eqally with balls on the upper and lower side - and",
"idea about lubricants, I would not know what to actually buy if the",
"and lower side - and probably PTFE grease for the threaded rods (as",
"y-Axis. As also, but not only, written here <http://reprap.org/wiki/Lubrication>, I know that one",
"at least only use two lubricants? I do not have the slightest idea",
"rods (as for example provided by the Ultimaker UM2) Is there a way",
"oil for sinter bearings, if anything at all, - grease on the 'more",
"two lubricants? I do not have the slightest idea about lubricants, I would",
"on the 'more fluid' side for the linear bearings so that the lubricant",
"upper and lower side - and probably PTFE grease for the threaded rods",
"Ultimaker UM2) Is there a way to unify this or at least only",
"provided by the Ultimaker UM2) Is there a way to unify this or",
"to actually buy if the combination would e.g. be machine oil and low",
"at all, - grease on the 'more fluid' side for the linear bearings",
"the Ultimaker UM2) Is there a way to unify this or at least",
"I do not have the slightest idea about lubricants, I would not know",
"a way to unify this or at least only use two lubricants? I",
"lower side - and probably PTFE grease for the threaded rods (as for",
"the lubricant stays eqally with balls on the upper and lower side -",
"grease on the 'more fluid' side for the linear bearings so that the",
"written here <http://reprap.org/wiki/Lubrication>, I know that one should: - use machine oil for",
"z-axis and bronze sinter bushings on the x- and y-Axis. As also, but",
"and bronze sinter bushings on the x- and y-Axis. As also, but not",
"anything at all, - grease on the 'more fluid' side for the linear",
"use two lubricants? I do not have the slightest idea about lubricants, I",
"lubricants, I would not know what to actually buy if the combination would",
"I would not know what to actually buy if the combination would e.g.",
"not have the slightest idea about lubricants, I would not know what to",
"what to actually buy if the combination would e.g. be machine oil and",
"for the z-axis and bronze sinter bushings on the x- and y-Axis. As",
"e.g. be machine oil and low viscosity grease. Do you have specific recommendations",
"and y-Axis. As also, but not only, written here <http://reprap.org/wiki/Lubrication>, I know that",
"stays eqally with balls on the upper and lower side - and probably",
"way to unify this or at least only use two lubricants? I do",
"use machine oil for sinter bearings, if anything at all, - grease on",
"if anything at all, - grease on the 'more fluid' side for the",
"know what to actually buy if the combination would e.g. be machine oil",
"linear bearings so that the lubricant stays eqally with balls on the upper",
"about lubricants, I would not know what to actually buy if the combination",
"with balls on the upper and lower side - and probably PTFE grease",
"to unify this or at least only use two lubricants? I do not",
"rods for the z-axis and bronze sinter bushings on the x- and y-Axis.",
"lubricants? I do not have the slightest idea about lubricants, I would not",
"one should: - use machine oil for sinter bearings, if anything at all,",
"or at least only use two lubricants? I do not have the slightest",
"on the upper and lower side - and probably PTFE grease for the",
"the upper and lower side - and probably PTFE grease for the threaded",
"on the x- and y-Axis. As also, but not only, written here <http://reprap.org/wiki/Lubrication>,",
"bronze sinter bushings on the x- and y-Axis. As also, but not only,",
"combination would e.g. be machine oil and low viscosity grease. Do you have",
"for sinter bearings, if anything at all, - grease on the 'more fluid'",
"x- and y-Axis. As also, but not only, written here <http://reprap.org/wiki/Lubrication>, I know",
"grease for the threaded rods (as for example provided by the Ultimaker UM2)",
"not only, written here <http://reprap.org/wiki/Lubrication>, I know that one should: - use machine",
"do not have the slightest idea about lubricants, I would not know what",
"not know what to actually buy if the combination would e.g. be machine",
"only use two lubricants? I do not have the slightest idea about lubricants,",
"the combination would e.g. be machine oil and low viscosity grease. Do you",
"and low viscosity grease. Do you have specific recommendations of what to avoid?",
"actually buy if the combination would e.g. be machine oil and low viscosity",
"will feature LM8UU bearings/threaded rods for the z-axis and bronze sinter bushings on",
"by the Ultimaker UM2) Is there a way to unify this or at",
"Is there a way to unify this or at least only use two",
"would e.g. be machine oil and low viscosity grease. Do you have specific",
"balls on the upper and lower side - and probably PTFE grease for",
"I know that one should: - use machine oil for sinter bearings, if",
"least only use two lubricants? I do not have the slightest idea about",
"machine oil for sinter bearings, if anything at all, - grease on the",
"the slightest idea about lubricants, I would not know what to actually buy",
"for the linear bearings so that the lubricant stays eqally with balls on",
"buy if the combination would e.g. be machine oil and low viscosity grease.",
"printer will feature LM8UU bearings/threaded rods for the z-axis and bronze sinter bushings",
"bushings on the x- and y-Axis. As also, but not only, written here",
"know that one should: - use machine oil for sinter bearings, if anything",
"all, - grease on the 'more fluid' side for the linear bearings so",
"side for the linear bearings so that the lubricant stays eqally with balls",
"should: - use machine oil for sinter bearings, if anything at all, -",
"so that the lubricant stays eqally with balls on the upper and lower",
"and probably PTFE grease for the threaded rods (as for example provided by",
"the z-axis and bronze sinter bushings on the x- and y-Axis. As also,",
"eqally with balls on the upper and lower side - and probably PTFE",
"sinter bushings on the x- and y-Axis. As also, but not only, written",
"My printer will feature LM8UU bearings/threaded rods for the z-axis and bronze sinter",
"'more fluid' side for the linear bearings so that the lubricant stays eqally",
"<http://reprap.org/wiki/Lubrication>, I know that one should: - use machine oil for sinter bearings,",
"the x- and y-Axis. As also, but not only, written here <http://reprap.org/wiki/Lubrication>, I",
"As also, but not only, written here <http://reprap.org/wiki/Lubrication>, I know that one should:",
"also, but not only, written here <http://reprap.org/wiki/Lubrication>, I know that one should: -",
"- grease on the 'more fluid' side for the linear bearings so that",
"there a way to unify this or at least only use two lubricants?",
"here <http://reprap.org/wiki/Lubrication>, I know that one should: - use machine oil for sinter",
"PTFE grease for the threaded rods (as for example provided by the Ultimaker",
"(as for example provided by the Ultimaker UM2) Is there a way to",
"side - and probably PTFE grease for the threaded rods (as for example",
"threaded rods (as for example provided by the Ultimaker UM2) Is there a",
"only, written here <http://reprap.org/wiki/Lubrication>, I know that one should: - use machine oil",
"that one should: - use machine oil for sinter bearings, if anything at",
"- and probably PTFE grease for the threaded rods (as for example provided",
"for example provided by the Ultimaker UM2) Is there a way to unify",
"would not know what to actually buy if the combination would e.g. be",
"machine oil and low viscosity grease. Do you have specific recommendations of what",
"the linear bearings so that the lubricant stays eqally with balls on the",
"for the threaded rods (as for example provided by the Ultimaker UM2) Is",
"the 'more fluid' side for the linear bearings so that the lubricant stays",
"bearings/threaded rods for the z-axis and bronze sinter bushings on the x- and",
"that the lubricant stays eqally with balls on the upper and lower side",
"probably PTFE grease for the threaded rods (as for example provided by the",
"the threaded rods (as for example provided by the Ultimaker UM2) Is there",
"feature LM8UU bearings/threaded rods for the z-axis and bronze sinter bushings on the",
"if the combination would e.g. be machine oil and low viscosity grease. Do"
] |
[
"am relatively new to 3D printing -- Am I missing something I should",
"with supports. I am relatively new to 3D printing -- Am I missing",
"reason for this? I printed one part last night and simply rotated the",
"45 degrees. Brackets, tubes, everything I have seen so far. Is there a",
"deal with supports. I am relatively new to 3D printing -- Am I",
"a reason for this? I printed one part last night and simply rotated",
"seen so far. Is there a reason for this? I printed one part",
"I am relatively new to 3D printing -- Am I missing something I",
"<http://www.openspaceagency.com/ultrascope>. All of the STL files for the 3D printable parts are canted",
"DIY telescope designed by the Open Space Agency. See <http://www.openspaceagency.com/ultrascope>. All of the",
"simply rotated the part so it would lay flat because I didn't want",
"night and simply rotated the part so it would lay flat because I",
"so it would lay flat because I didn't want to deal with supports.",
"lay flat because I didn't want to deal with supports. I am relatively",
"Ultrascope DIY telescope designed by the Open Space Agency. See <http://www.openspaceagency.com/ultrascope>. All of",
"for the Ultrascope DIY telescope designed by the Open Space Agency. See <http://www.openspaceagency.com/ultrascope>.",
"Is there a reason for this? I printed one part last night and",
"tubes, everything I have seen so far. Is there a reason for this?",
"relatively new to 3D printing -- Am I missing something I should know?",
"the parts for the Ultrascope DIY telescope designed by the Open Space Agency.",
"to 3D printing -- Am I missing something I should know? Is this",
"All of the STL files for the 3D printable parts are canted 45",
"parts for the Ultrascope DIY telescope designed by the Open Space Agency. See",
"began printing the parts for the Ultrascope DIY telescope designed by the Open",
"new to 3D printing -- Am I missing something I should know? Is",
"there a reason for this? I printed one part last night and simply",
"have seen so far. Is there a reason for this? I printed one",
"didn't want to deal with supports. I am relatively new to 3D printing",
"3D printing -- Am I missing something I should know? Is this a",
"printing -- Am I missing something I should know? Is this a thing?",
"parts are canted 45 degrees. Brackets, tubes, everything I have seen so far.",
"far. Is there a reason for this? I printed one part last night",
"canted 45 degrees. Brackets, tubes, everything I have seen so far. Is there",
"flat because I didn't want to deal with supports. I am relatively new",
"printing the parts for the Ultrascope DIY telescope designed by the Open Space",
"last night and simply rotated the part so it would lay flat because",
"part last night and simply rotated the part so it would lay flat",
"the Ultrascope DIY telescope designed by the Open Space Agency. See <http://www.openspaceagency.com/ultrascope>. All",
"degrees. Brackets, tubes, everything I have seen so far. Is there a reason",
"the Open Space Agency. See <http://www.openspaceagency.com/ultrascope>. All of the STL files for the",
"Agency. See <http://www.openspaceagency.com/ultrascope>. All of the STL files for the 3D printable parts",
"rotated the part so it would lay flat because I didn't want to",
"telescope designed by the Open Space Agency. See <http://www.openspaceagency.com/ultrascope>. All of the STL",
"to deal with supports. I am relatively new to 3D printing -- Am",
"STL files for the 3D printable parts are canted 45 degrees. Brackets, tubes,",
"everything I have seen so far. Is there a reason for this? I",
"part so it would lay flat because I didn't want to deal with",
"designed by the Open Space Agency. See <http://www.openspaceagency.com/ultrascope>. All of the STL files",
"would lay flat because I didn't want to deal with supports. I am",
"I printed one part last night and simply rotated the part so it",
"by the Open Space Agency. See <http://www.openspaceagency.com/ultrascope>. All of the STL files for",
"for this? I printed one part last night and simply rotated the part",
"Open Space Agency. See <http://www.openspaceagency.com/ultrascope>. All of the STL files for the 3D",
"one part last night and simply rotated the part so it would lay",
"I began printing the parts for the Ultrascope DIY telescope designed by the",
"Space Agency. See <http://www.openspaceagency.com/ultrascope>. All of the STL files for the 3D printable",
"are canted 45 degrees. Brackets, tubes, everything I have seen so far. Is",
"and simply rotated the part so it would lay flat because I didn't",
"the 3D printable parts are canted 45 degrees. Brackets, tubes, everything I have",
"3D printable parts are canted 45 degrees. Brackets, tubes, everything I have seen",
"printable parts are canted 45 degrees. Brackets, tubes, everything I have seen so",
"the part so it would lay flat because I didn't want to deal",
"want to deal with supports. I am relatively new to 3D printing --",
"because I didn't want to deal with supports. I am relatively new to",
"files for the 3D printable parts are canted 45 degrees. Brackets, tubes, everything",
"I have seen so far. Is there a reason for this? I printed",
"it would lay flat because I didn't want to deal with supports. I",
"of the STL files for the 3D printable parts are canted 45 degrees.",
"the STL files for the 3D printable parts are canted 45 degrees. Brackets,",
"Brackets, tubes, everything I have seen so far. Is there a reason for",
"this? I printed one part last night and simply rotated the part so",
"printed one part last night and simply rotated the part so it would",
"I didn't want to deal with supports. I am relatively new to 3D",
"See <http://www.openspaceagency.com/ultrascope>. All of the STL files for the 3D printable parts are",
"so far. Is there a reason for this? I printed one part last",
"for the 3D printable parts are canted 45 degrees. Brackets, tubes, everything I",
"supports. I am relatively new to 3D printing -- Am I missing something"
] |
[
"this following first picture, I attempted with a 240°C tip and a 150°C",
"a 150°C bed\") [![220°C tip and a 50°C bed](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a",
"ABS on the base plate (just as you would do when printing with",
"one side actually looked somewhat decent while the other clearly had trouble sticking.",
"rather than a steady, even filament. (Print speed on this was 2100 mm/min)",
"tip and a 150°C bed\") [![220°C tip and a 50°C bed](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip",
"mm/min) [![240°C tip and a 150°C bed](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a 150°C bed\")](https://i.stack.imgur.com/KCbye.jpg",
"attempted with a 240°C tip and a 150°C bed (above PP's Tg). Oddly",
"a 240°C tip and a 150°C bed (above PP's Tg). Oddly enough, one",
"extruded with little blips of material followed by a more stringy section, rather",
"using a very thin coat of ABS on the base plate (just as",
"was 2100 mm/min) [![240°C tip and a 150°C bed](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a",
"and I think it may have to do with the conditions. I'm using",
"150°C bed (above PP's Tg). Oddly enough, one side actually looked somewhat decent",
"a lot of trouble printing polypropylene right now, and I think it may",
"I'm having a lot of trouble printing polypropylene right now, and I think",
"on the base plate (just as you would do when printing with ABS)",
"150°C bed](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a 150°C bed\")](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a 150°C",
"the base plate (just as you would do when printing with ABS) in",
"printing with ABS) in order to promote sticking. In this following first picture,",
"this was 2100 mm/min) [![240°C tip and a 150°C bed](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and",
"side actually looked somewhat decent while the other clearly had trouble sticking. The",
"\"240°C tip and a 150°C bed\") [![220°C tip and a 50°C bed](https://i.stack.imgur.com/IaF8Z.jpg \"220°C",
"and a 50°C bed. What's interesting in that print (you may be able",
"printing polypropylene right now, and I think it may have to do with",
"bed\")](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a 150°C bed\") [![220°C tip and a 50°C bed](https://i.stack.imgur.com/IaF8Z.jpg",
"you would do when printing with ABS) in order to promote sticking. In",
"In this following first picture, I attempted with a 240°C tip and a",
"plate (just as you would do when printing with ABS) in order to",
"at 220°C and a 50°C bed. What's interesting in that print (you may",
"be able to see it) is that the polymer extruded with little blips",
"220°C and a 50°C bed. What's interesting in that print (you may be",
"interesting in that print (you may be able to see it) is that",
"picture, I was printing with the tip at 220°C and a 50°C bed.",
"bed. What's interesting in that print (you may be able to see it)",
"and a 150°C bed\") [![220°C tip and a 50°C bed](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and",
"\"220°C tip and a 50°C bed\")](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a 50°C bed\") Does",
"think it may have to do with the conditions. I'm using a very",
"with the conditions. I'm using a very thin coat of ABS on the",
"with the tip at 220°C and a 50°C bed. What's interesting in that",
"240°C tip and a 150°C bed (above PP's Tg). Oddly enough, one side",
"than a steady, even filament. (Print speed on this was 2100 mm/min) [![240°C",
"speed on this was 1500 mm/min. In the second picture, I was printing",
"it) is that the polymer extruded with little blips of material followed by",
"50°C bed\")](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a 50°C bed\") Does anyone have suggestions for",
"The print speed on this was 1500 mm/min. In the second picture, I",
"PP's Tg). Oddly enough, one side actually looked somewhat decent while the other",
"the polymer extruded with little blips of material followed by a more stringy",
"steady, even filament. (Print speed on this was 2100 mm/min) [![240°C tip and",
"sticking. The print speed on this was 1500 mm/min. In the second picture,",
"may be able to see it) is that the polymer extruded with little",
"polymer extruded with little blips of material followed by a more stringy section,",
"by a more stringy section, rather than a steady, even filament. (Print speed",
"on this was 2100 mm/min) [![240°C tip and a 150°C bed](https://i.stack.imgur.com/KCbye.jpg \"240°C tip",
"tip and a 150°C bed (above PP's Tg). Oddly enough, one side actually",
"Tg). Oddly enough, one side actually looked somewhat decent while the other clearly",
"with little blips of material followed by a more stringy section, rather than",
"a steady, even filament. (Print speed on this was 2100 mm/min) [![240°C tip",
"and a 150°C bed\")](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a 150°C bed\") [![220°C tip and",
"a 50°C bed\") Does anyone have suggestions for doing better prints with PP?",
"conditions. I'm using a very thin coat of ABS on the base plate",
"tip and a 150°C bed\")](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a 150°C bed\") [![220°C tip",
"blips of material followed by a more stringy section, rather than a steady,",
"to see it) is that the polymer extruded with little blips of material",
"stringy section, rather than a steady, even filament. (Print speed on this was",
"a 150°C bed](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a 150°C bed\")](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a",
"bed\")](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a 50°C bed\") Does anyone have suggestions for doing",
"tip and a 50°C bed](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a 50°C bed\")](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip",
"\"240°C tip and a 150°C bed\")](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a 150°C bed\") [![220°C",
"right now, and I think it may have to do with the conditions.",
"followed by a more stringy section, rather than a steady, even filament. (Print",
"and a 50°C bed](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a 50°C bed\")](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and",
"enough, one side actually looked somewhat decent while the other clearly had trouble",
"mm/min. In the second picture, I was printing with the tip at 220°C",
"able to see it) is that the polymer extruded with little blips of",
"more stringy section, rather than a steady, even filament. (Print speed on this",
"and a 150°C bed (above PP's Tg). Oddly enough, one side actually looked",
"a 150°C bed\")](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a 150°C bed\") [![220°C tip and a",
"now, and I think it may have to do with the conditions. I'm",
"(just as you would do when printing with ABS) in order to promote",
"of trouble printing polypropylene right now, and I think it may have to",
"with ABS) in order to promote sticking. In this following first picture, I",
"print speed on this was 1500 mm/min. In the second picture, I was",
"when printing with ABS) in order to promote sticking. In this following first",
"150°C bed\")](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a 150°C bed\") [![220°C tip and a 50°C",
"had trouble sticking. The print speed on this was 1500 mm/min. In the",
"this was 1500 mm/min. In the second picture, I was printing with the",
"section, rather than a steady, even filament. (Print speed on this was 2100",
"other clearly had trouble sticking. The print speed on this was 1500 mm/min.",
"to promote sticking. In this following first picture, I attempted with a 240°C",
"trouble printing polypropylene right now, and I think it may have to do",
"may have to do with the conditions. I'm using a very thin coat",
"was 1500 mm/min. In the second picture, I was printing with the tip",
"thin coat of ABS on the base plate (just as you would do",
"(Print speed on this was 2100 mm/min) [![240°C tip and a 150°C bed](https://i.stack.imgur.com/KCbye.jpg",
"and a 150°C bed](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a 150°C bed\")](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and",
"\"220°C tip and a 50°C bed\") Does anyone have suggestions for doing better",
"ABS) in order to promote sticking. In this following first picture, I attempted",
"second picture, I was printing with the tip at 220°C and a 50°C",
"of ABS on the base plate (just as you would do when printing",
"(you may be able to see it) is that the polymer extruded with",
"[![220°C tip and a 50°C bed](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a 50°C bed\")](https://i.stack.imgur.com/IaF8Z.jpg \"220°C",
"lot of trouble printing polypropylene right now, and I think it may have",
"tip and a 150°C bed](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a 150°C bed\")](https://i.stack.imgur.com/KCbye.jpg \"240°C tip",
"on this was 1500 mm/min. In the second picture, I was printing with",
"[![240°C tip and a 150°C bed](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a 150°C bed\")](https://i.stack.imgur.com/KCbye.jpg \"240°C",
"50°C bed](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a 50°C bed\")](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a 50°C",
"a 150°C bed (above PP's Tg). Oddly enough, one side actually looked somewhat",
"bed\") [![220°C tip and a 50°C bed](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a 50°C bed\")](https://i.stack.imgur.com/IaF8Z.jpg",
"the other clearly had trouble sticking. The print speed on this was 1500",
"a 50°C bed](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a 50°C bed\")](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a",
"while the other clearly had trouble sticking. The print speed on this was",
"bed (above PP's Tg). Oddly enough, one side actually looked somewhat decent while",
"looked somewhat decent while the other clearly had trouble sticking. The print speed",
"see it) is that the polymer extruded with little blips of material followed",
"even filament. (Print speed on this was 2100 mm/min) [![240°C tip and a",
"that the polymer extruded with little blips of material followed by a more",
"I'm using a very thin coat of ABS on the base plate (just",
"picture, I attempted with a 240°C tip and a 150°C bed (above PP's",
"as you would do when printing with ABS) in order to promote sticking.",
"2100 mm/min) [![240°C tip and a 150°C bed](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a 150°C",
"a very thin coat of ABS on the base plate (just as you",
"filament. (Print speed on this was 2100 mm/min) [![240°C tip and a 150°C",
"I was printing with the tip at 220°C and a 50°C bed. What's",
"having a lot of trouble printing polypropylene right now, and I think it",
"tip and a 50°C bed\")](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a 50°C bed\") Does anyone",
"somewhat decent while the other clearly had trouble sticking. The print speed on",
"150°C bed\") [![220°C tip and a 50°C bed](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a 50°C",
"and a 50°C bed\")](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a 50°C bed\") Does anyone have",
"that print (you may be able to see it) is that the polymer",
"little blips of material followed by a more stringy section, rather than a",
"a 50°C bed\")](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a 50°C bed\") Does anyone have suggestions",
"very thin coat of ABS on the base plate (just as you would",
"a 50°C bed. What's interesting in that print (you may be able to",
"first picture, I attempted with a 240°C tip and a 150°C bed (above",
"have to do with the conditions. I'm using a very thin coat of",
"order to promote sticking. In this following first picture, I attempted with a",
"it may have to do with the conditions. I'm using a very thin",
"printing with the tip at 220°C and a 50°C bed. What's interesting in",
"of material followed by a more stringy section, rather than a steady, even",
"In the second picture, I was printing with the tip at 220°C and",
"a more stringy section, rather than a steady, even filament. (Print speed on",
"promote sticking. In this following first picture, I attempted with a 240°C tip",
"the second picture, I was printing with the tip at 220°C and a",
"and a 50°C bed\") Does anyone have suggestions for doing better prints with",
"1500 mm/min. In the second picture, I was printing with the tip at",
"do with the conditions. I'm using a very thin coat of ABS on",
"speed on this was 2100 mm/min) [![240°C tip and a 150°C bed](https://i.stack.imgur.com/KCbye.jpg \"240°C",
"the conditions. I'm using a very thin coat of ABS on the base",
"I attempted with a 240°C tip and a 150°C bed (above PP's Tg).",
"do when printing with ABS) in order to promote sticking. In this following",
"material followed by a more stringy section, rather than a steady, even filament.",
"clearly had trouble sticking. The print speed on this was 1500 mm/min. In",
"to do with the conditions. I'm using a very thin coat of ABS",
"base plate (just as you would do when printing with ABS) in order",
"(above PP's Tg). Oddly enough, one side actually looked somewhat decent while the",
"was printing with the tip at 220°C and a 50°C bed. What's interesting",
"tip at 220°C and a 50°C bed. What's interesting in that print (you",
"50°C bed. What's interesting in that print (you may be able to see",
"sticking. In this following first picture, I attempted with a 240°C tip and",
"in order to promote sticking. In this following first picture, I attempted with",
"Oddly enough, one side actually looked somewhat decent while the other clearly had",
"bed](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a 50°C bed\")](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a 50°C bed\")",
"polypropylene right now, and I think it may have to do with the",
"with a 240°C tip and a 150°C bed (above PP's Tg). Oddly enough,",
"actually looked somewhat decent while the other clearly had trouble sticking. The print",
"trouble sticking. The print speed on this was 1500 mm/min. In the second",
"would do when printing with ABS) in order to promote sticking. In this",
"What's interesting in that print (you may be able to see it) is",
"decent while the other clearly had trouble sticking. The print speed on this",
"coat of ABS on the base plate (just as you would do when",
"tip and a 50°C bed\") Does anyone have suggestions for doing better prints",
"following first picture, I attempted with a 240°C tip and a 150°C bed",
"is that the polymer extruded with little blips of material followed by a",
"I think it may have to do with the conditions. I'm using a",
"the tip at 220°C and a 50°C bed. What's interesting in that print",
"in that print (you may be able to see it) is that the",
"print (you may be able to see it) is that the polymer extruded",
"bed](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a 150°C bed\")](https://i.stack.imgur.com/KCbye.jpg \"240°C tip and a 150°C bed\")"
] |
[
"be several layer of this on top of each other and the shape",
"top of each other and the shape would be kind of carved out",
"whole model would be within 30 \\* 30 \\* 10 cm, the honeycomb",
"can use to generate honeycombs like this, or do I have to write",
"to reality check it for me. Basically what I want to do is",
"this, or do I have to write it myself? Edit: This is how",
"to write it myself? Edit: This is how two layers of the honeycomb",
"cm, the honeycomb edges would be approximately 1mm thick and about 15mm long",
"I'm a total noob in this area and need someone to reality check",
"generate honeycombs like this, or do I have to write it myself? Edit:",
"use to generate honeycombs like this, or do I have to write it",
"thick and about 15mm long and it would be printed out of nylon",
"fit it, but still it feels slightly more extreme use than what they",
"Does anyone else use a similar method? Is there some software that I",
"Is there some software that I can use to generate honeycombs like this,",
"Edit: This is how two layers of the honeycomb look like: [](https://i.stack.imgur.com/ttIZ6.jpg) In",
"it feels slightly more extreme use than what they had in mind. Is",
"kind of carved out of the honeycomb (+ some finishing to avoid spiky",
"Shapeways' design guidelines and my idea seems to fit it, but still it",
"Basically what I want to do is a tricopter frame made of a",
"and it would be printed out of nylon with SLS. I have found",
"like: [](https://i.stack.imgur.com/ttIZ6.jpg) In the actual model there would be several layer of this",
"within 30 \\* 30 \\* 10 cm, the honeycomb edges would be approximately",
"need someone to reality check it for me. Basically what I want to",
"would be printed out of nylon with SLS. I have found Shapeways' design",
"be approximately 1mm thick and about 15mm long and it would be printed",
"each other and the shape would be kind of carved out of the",
"some software that I can use to generate honeycombs like this, or do",
"layers of the honeycomb look like: [](https://i.stack.imgur.com/ttIZ6.jpg) In the actual model there would",
"have found Shapeways' design guidelines and my idea seems to fit it, but",
"found Shapeways' design guidelines and my idea seems to fit it, but still",
"it for me. Basically what I want to do is a tricopter frame",
"how two layers of the honeycomb look like: [](https://i.stack.imgur.com/ttIZ6.jpg) In the actual model",
"[](https://i.stack.imgur.com/ttIZ6.jpg) In the actual model there would be several layer of this on",
"for a 3D printed project, but I'm a total noob in this area",
"of this on top of each other and the shape would be kind",
"printed project, but I'm a total noob in this area and need someone",
"more extreme use than what they had in mind. Is this doable? Does",
"approximately 1mm thick and about 15mm long and it would be printed out",
"the honeycomb edges would be approximately 1mm thick and about 15mm long and",
"write it myself? Edit: This is how two layers of the honeycomb look",
"two layers of the honeycomb look like: [](https://i.stack.imgur.com/ttIZ6.jpg) In the actual model there",
"seems to fit it, but still it feels slightly more extreme use than",
"idea for a 3D printed project, but I'm a total noob in this",
"10 cm, the honeycomb edges would be approximately 1mm thick and about 15mm",
"it, but still it feels slightly more extreme use than what they had",
"this area and need someone to reality check it for me. Basically what",
"actual model there would be several layer of this on top of each",
"else use a similar method? Is there some software that I can use",
"there some software that I can use to generate honeycombs like this, or",
"\\* 30 \\* 10 cm, the honeycomb edges would be approximately 1mm thick",
"I have to write it myself? Edit: This is how two layers of",
"model would be within 30 \\* 30 \\* 10 cm, the honeycomb edges",
"honeycomb look like: [](https://i.stack.imgur.com/ttIZ6.jpg) In the actual model there would be several layer",
"have an idea for a 3D printed project, but I'm a total noob",
"with SLS. I have found Shapeways' design guidelines and my idea seems to",
"anyone else use a similar method? Is there some software that I can",
"use a similar method? Is there some software that I can use to",
"model there would be several layer of this on top of each other",
"Is this doable? Does anyone else use a similar method? Is there some",
"be kind of carved out of the honeycomb (+ some finishing to avoid",
"I have an idea for a 3D printed project, but I'm a total",
"to do is a tricopter frame made of a [tetrahedral honeycomb](https://en.wikipedia.org/wiki/Tetragonal_disphenoid_honeycomb). The whole",
"the shape would be kind of carved out of the honeycomb (+ some",
"shape would be kind of carved out of the honeycomb (+ some finishing",
"but still it feels slightly more extreme use than what they had in",
"SLS. I have found Shapeways' design guidelines and my idea seems to fit",
"do I have to write it myself? Edit: This is how two layers",
"an idea for a 3D printed project, but I'm a total noob in",
"for me. Basically what I want to do is a tricopter frame made",
"my idea seems to fit it, but still it feels slightly more extreme",
"like this, or do I have to write it myself? Edit: This is",
"I want to do is a tricopter frame made of a [tetrahedral honeycomb](https://en.wikipedia.org/wiki/Tetragonal_disphenoid_honeycomb).",
"out of nylon with SLS. I have found Shapeways' design guidelines and my",
"reality check it for me. Basically what I want to do is a",
"printed out of nylon with SLS. I have found Shapeways' design guidelines and",
"[tetrahedral honeycomb](https://en.wikipedia.org/wiki/Tetragonal_disphenoid_honeycomb). The whole model would be within 30 \\* 30 \\* 10",
"check it for me. Basically what I want to do is a tricopter",
"want to do is a tricopter frame made of a [tetrahedral honeycomb](https://en.wikipedia.org/wiki/Tetragonal_disphenoid_honeycomb). The",
"would be approximately 1mm thick and about 15mm long and it would be",
"than what they had in mind. Is this doable? Does anyone else use",
"and need someone to reality check it for me. Basically what I want",
"I can use to generate honeycombs like this, or do I have to",
"a tricopter frame made of a [tetrahedral honeycomb](https://en.wikipedia.org/wiki/Tetragonal_disphenoid_honeycomb). The whole model would be",
"3D printed project, but I'm a total noob in this area and need",
"of a [tetrahedral honeycomb](https://en.wikipedia.org/wiki/Tetragonal_disphenoid_honeycomb). The whole model would be within 30 \\* 30",
"slightly more extreme use than what they had in mind. Is this doable?",
"in this area and need someone to reality check it for me. Basically",
"myself? Edit: This is how two layers of the honeycomb look like: [](https://i.stack.imgur.com/ttIZ6.jpg)",
"it would be printed out of nylon with SLS. I have found Shapeways'",
"or do I have to write it myself? Edit: This is how two",
"is a tricopter frame made of a [tetrahedral honeycomb](https://en.wikipedia.org/wiki/Tetragonal_disphenoid_honeycomb). The whole model would",
"guidelines and my idea seems to fit it, but still it feels slightly",
"had in mind. Is this doable? Does anyone else use a similar method?",
"to generate honeycombs like this, or do I have to write it myself?",
"of nylon with SLS. I have found Shapeways' design guidelines and my idea",
"nylon with SLS. I have found Shapeways' design guidelines and my idea seems",
"a [tetrahedral honeycomb](https://en.wikipedia.org/wiki/Tetragonal_disphenoid_honeycomb). The whole model would be within 30 \\* 30 \\*",
"frame made of a [tetrahedral honeycomb](https://en.wikipedia.org/wiki/Tetragonal_disphenoid_honeycomb). The whole model would be within 30",
"this doable? Does anyone else use a similar method? Is there some software",
"I have found Shapeways' design guidelines and my idea seems to fit it,",
"project, but I'm a total noob in this area and need someone to",
"edges would be approximately 1mm thick and about 15mm long and it would",
"30 \\* 10 cm, the honeycomb edges would be approximately 1mm thick and",
"a similar method? Is there some software that I can use to generate",
"made of a [tetrahedral honeycomb](https://en.wikipedia.org/wiki/Tetragonal_disphenoid_honeycomb). The whole model would be within 30 \\*",
"that I can use to generate honeycombs like this, or do I have",
"but I'm a total noob in this area and need someone to reality",
"and about 15mm long and it would be printed out of nylon with",
"a 3D printed project, but I'm a total noob in this area and",
"1mm thick and about 15mm long and it would be printed out of",
"idea seems to fit it, but still it feels slightly more extreme use",
"me. Basically what I want to do is a tricopter frame made of",
"would be kind of carved out of the honeycomb (+ some finishing to",
"look like: [](https://i.stack.imgur.com/ttIZ6.jpg) In the actual model there would be several layer of",
"honeycomb](https://en.wikipedia.org/wiki/Tetragonal_disphenoid_honeycomb). The whole model would be within 30 \\* 30 \\* 10 cm,",
"the honeycomb look like: [](https://i.stack.imgur.com/ttIZ6.jpg) In the actual model there would be several",
"would be within 30 \\* 30 \\* 10 cm, the honeycomb edges would",
"design guidelines and my idea seems to fit it, but still it feels",
"honeycombs like this, or do I have to write it myself? Edit: This",
"30 \\* 30 \\* 10 cm, the honeycomb edges would be approximately 1mm",
"to fit it, but still it feels slightly more extreme use than what",
"extreme use than what they had in mind. Is this doable? Does anyone",
"they had in mind. Is this doable? Does anyone else use a similar",
"software that I can use to generate honeycombs like this, or do I",
"on top of each other and the shape would be kind of carved",
"be printed out of nylon with SLS. I have found Shapeways' design guidelines",
"similar method? Is there some software that I can use to generate honeycombs",
"This is how two layers of the honeycomb look like: [](https://i.stack.imgur.com/ttIZ6.jpg) In the",
"have to write it myself? Edit: This is how two layers of the",
"and my idea seems to fit it, but still it feels slightly more",
"still it feels slightly more extreme use than what they had in mind.",
"about 15mm long and it would be printed out of nylon with SLS.",
"use than what they had in mind. Is this doable? Does anyone else",
"feels slightly more extreme use than what they had in mind. Is this",
"method? Is there some software that I can use to generate honeycombs like",
"mind. Is this doable? Does anyone else use a similar method? Is there",
"is how two layers of the honeycomb look like: [](https://i.stack.imgur.com/ttIZ6.jpg) In the actual",
"this on top of each other and the shape would be kind of",
"other and the shape would be kind of carved out of the honeycomb",
"be within 30 \\* 30 \\* 10 cm, the honeycomb edges would be",
"of the honeycomb look like: [](https://i.stack.imgur.com/ttIZ6.jpg) In the actual model there would be",
"15mm long and it would be printed out of nylon with SLS. I",
"there would be several layer of this on top of each other and",
"it myself? Edit: This is how two layers of the honeycomb look like:",
"would be several layer of this on top of each other and the",
"The whole model would be within 30 \\* 30 \\* 10 cm, the",
"of each other and the shape would be kind of carved out of",
"area and need someone to reality check it for me. Basically what I",
"layer of this on top of each other and the shape would be",
"total noob in this area and need someone to reality check it for",
"in mind. Is this doable? Does anyone else use a similar method? Is",
"the actual model there would be several layer of this on top of",
"honeycomb edges would be approximately 1mm thick and about 15mm long and it",
"In the actual model there would be several layer of this on top",
"someone to reality check it for me. Basically what I want to do",
"doable? Does anyone else use a similar method? Is there some software that",
"long and it would be printed out of nylon with SLS. I have",
"of carved out of the honeycomb (+ some finishing to avoid spiky surface)",
"and the shape would be kind of carved out of the honeycomb (+",
"a total noob in this area and need someone to reality check it",
"what they had in mind. Is this doable? Does anyone else use a",
"noob in this area and need someone to reality check it for me.",
"tricopter frame made of a [tetrahedral honeycomb](https://en.wikipedia.org/wiki/Tetragonal_disphenoid_honeycomb). The whole model would be within",
"what I want to do is a tricopter frame made of a [tetrahedral",
"do is a tricopter frame made of a [tetrahedral honeycomb](https://en.wikipedia.org/wiki/Tetragonal_disphenoid_honeycomb). The whole model",
"several layer of this on top of each other and the shape would",
"\\* 10 cm, the honeycomb edges would be approximately 1mm thick and about"
] |
[
"file from Tinkercad as any of these: ``` .STL .OBJ .X3D .VRML ```",
"Tinkercad as any of these: ``` .STL .OBJ .X3D .VRML ``` Is there",
"any of these: ``` .STL .OBJ .X3D .VRML ``` Is there a way",
".X3D .VRML ``` Is there a way to convert any of those file",
"Is there a way to convert any of those file types to .DWG?",
".OBJ .X3D .VRML ``` Is there a way to convert any of those",
"as any of these: ``` .STL .OBJ .X3D .VRML ``` Is there a",
"``` Is there a way to convert any of those file types to",
"of these: ``` .STL .OBJ .X3D .VRML ``` Is there a way to",
".VRML ``` Is there a way to convert any of those file types",
"download a file from Tinkercad as any of these: ``` .STL .OBJ .X3D",
".STL .OBJ .X3D .VRML ``` Is there a way to convert any of",
"``` .STL .OBJ .X3D .VRML ``` Is there a way to convert any",
"can download a file from Tinkercad as any of these: ``` .STL .OBJ",
"from Tinkercad as any of these: ``` .STL .OBJ .X3D .VRML ``` Is",
"a file from Tinkercad as any of these: ``` .STL .OBJ .X3D .VRML",
"these: ``` .STL .OBJ .X3D .VRML ``` Is there a way to convert",
"I can download a file from Tinkercad as any of these: ``` .STL"
] |
[
"printing and need to know if I use steel in printing, do I",
"need to know if I use steel in printing, do I get the",
"printing, do I get the same strength (compression and shear) as steel profiles",
"to 3D printing and need to know if I use steel in printing,",
"am new to 3D printing and need to know if I use steel",
"I use steel in printing, do I get the same strength (compression and",
"to know if I use steel in printing, do I get the same",
"the same strength (compression and shear) as steel profiles manufactured in a factory?",
"do I get the same strength (compression and shear) as steel profiles manufactured",
"in printing, do I get the same strength (compression and shear) as steel",
"know if I use steel in printing, do I get the same strength",
"steel in printing, do I get the same strength (compression and shear) as",
"get the same strength (compression and shear) as steel profiles manufactured in a",
"use steel in printing, do I get the same strength (compression and shear)",
"new to 3D printing and need to know if I use steel in",
"3D printing and need to know if I use steel in printing, do",
"I am new to 3D printing and need to know if I use",
"and need to know if I use steel in printing, do I get",
"if I use steel in printing, do I get the same strength (compression",
"I get the same strength (compression and shear) as steel profiles manufactured in"
] |
[
"was wondering, can the whole model just be printed as a solid object,",
"right thickness. So, I was wondering, can the whole model just be printed",
"whole model just be printed as a solid object, with 100% infill, and",
"that it needs to be 3\" tall and the walls have to be",
"prepare a 3D model for 3D printing in sandstone. I've been told that",
"printing in sandstone. I've been told that it needs to be 3\" tall",
"been told that it needs to be 3\" tall and the walls have",
"2 mm thick. It's an absolute pain in the neck having to make",
"thick. It's an absolute pain in the neck having to make sure everything",
"told that it needs to be 3\" tall and the walls have to",
"and the walls have to be at least 2 mm thick. It's an",
"the whole model just be printed as a solid object, with 100% infill,",
"least 2 mm thick. It's an absolute pain in the neck having to",
"be 3\" tall and the walls have to be at least 2 mm",
"in sandstone. I've been told that it needs to be 3\" tall and",
"an absolute pain in the neck having to make sure everything is the",
"3D model for 3D printing in sandstone. I've been told that it needs",
"the neck having to make sure everything is the right thickness. So, I",
"having to make sure everything is the right thickness. So, I was wondering,",
"just be printed as a solid object, with 100% infill, and does that",
"walls have to be at least 2 mm thick. It's an absolute pain",
"to be at least 2 mm thick. It's an absolute pain in the",
"It's an absolute pain in the neck having to make sure everything is",
"printed as a solid object, with 100% infill, and does that work for",
"tall and the walls have to be at least 2 mm thick. It's",
"I've been asked to prepare a 3D model for 3D printing in sandstone.",
"been asked to prepare a 3D model for 3D printing in sandstone. I've",
"3\" tall and the walls have to be at least 2 mm thick.",
"be at least 2 mm thick. It's an absolute pain in the neck",
"mm thick. It's an absolute pain in the neck having to make sure",
"to make sure everything is the right thickness. So, I was wondering, can",
"be printed as a solid object, with 100% infill, and does that work",
"at least 2 mm thick. It's an absolute pain in the neck having",
"wondering, can the whole model just be printed as a solid object, with",
"as a solid object, with 100% infill, and does that work for sandstone?",
"pain in the neck having to make sure everything is the right thickness.",
"the walls have to be at least 2 mm thick. It's an absolute",
"is the right thickness. So, I was wondering, can the whole model just",
"3D printing in sandstone. I've been told that it needs to be 3\"",
"absolute pain in the neck having to make sure everything is the right",
"model just be printed as a solid object, with 100% infill, and does",
"neck having to make sure everything is the right thickness. So, I was",
"I've been told that it needs to be 3\" tall and the walls",
"needs to be 3\" tall and the walls have to be at least",
"have to be at least 2 mm thick. It's an absolute pain in",
"model for 3D printing in sandstone. I've been told that it needs to",
"sure everything is the right thickness. So, I was wondering, can the whole",
"everything is the right thickness. So, I was wondering, can the whole model",
"for 3D printing in sandstone. I've been told that it needs to be",
"to prepare a 3D model for 3D printing in sandstone. I've been told",
"make sure everything is the right thickness. So, I was wondering, can the",
"sandstone. I've been told that it needs to be 3\" tall and the",
"I was wondering, can the whole model just be printed as a solid",
"the right thickness. So, I was wondering, can the whole model just be",
"thickness. So, I was wondering, can the whole model just be printed as",
"can the whole model just be printed as a solid object, with 100%",
"it needs to be 3\" tall and the walls have to be at",
"a 3D model for 3D printing in sandstone. I've been told that it",
"asked to prepare a 3D model for 3D printing in sandstone. I've been",
"in the neck having to make sure everything is the right thickness. So,",
"to be 3\" tall and the walls have to be at least 2",
"So, I was wondering, can the whole model just be printed as a"
] |
[
"a way to make all your prints seamless?? I know there was this",
"z axis making it seamless. Why cant this be done with regular prints?",
"a vase constantly changing the z axis making it seamless. Why cant this",
"program that printed a vase constantly changing the z axis making it seamless.",
"was this program that printed a vase constantly changing the z axis making",
"Is there a way to make all your prints seamless?? I know there",
"constantly changing the z axis making it seamless. Why cant this be done",
"this program that printed a vase constantly changing the z axis making it",
"seamless?? I know there was this program that printed a vase constantly changing",
"your prints seamless?? I know there was this program that printed a vase",
"way to make all your prints seamless?? I know there was this program",
"know there was this program that printed a vase constantly changing the z",
"there was this program that printed a vase constantly changing the z axis",
"vase constantly changing the z axis making it seamless. Why cant this be",
"I know there was this program that printed a vase constantly changing the",
"that printed a vase constantly changing the z axis making it seamless. Why",
"there a way to make all your prints seamless?? I know there was",
"prints seamless?? I know there was this program that printed a vase constantly",
"printed a vase constantly changing the z axis making it seamless. Why cant",
"make all your prints seamless?? I know there was this program that printed",
"the z axis making it seamless. Why cant this be done with regular",
"changing the z axis making it seamless. Why cant this be done with",
"all your prints seamless?? I know there was this program that printed a",
"to make all your prints seamless?? I know there was this program that"
] |
[
"the G-code. What could be causing this? I'm printing from an SD card",
"very slowly moving back to its original position and resuming the print as",
"the way to the left/front, before very slowly moving back to its original",
"moves: it will very slowly move either the X or Y axis all",
"moves are definitely not part of the G-code. What could be causing this?",
"to the left/front, before very slowly moving back to its original position and",
"very slowly move either the X or Y axis all the way to",
"either the X or Y axis all the way to the left/front, before",
"left/front, before very slowly moving back to its original position and resuming the",
"all the way to the left/front, before very slowly moving back to its",
"its original position and resuming the print as normal. I've checked my G-code",
"definitely not part of the G-code. What could be causing this? I'm printing",
"to its original position and resuming the print as normal. I've checked my",
"normal. I've checked my G-code files, and the moves are definitely not part",
"G-code files, and the moves are definitely not part of the G-code. What",
"and the moves are definitely not part of the G-code. What could be",
"and resuming the print as normal. I've checked my G-code files, and the",
"Y axis all the way to the left/front, before very slowly moving back",
"part of the G-code. What could be causing this? I'm printing from an",
"slowly moving back to its original position and resuming the print as normal.",
"could be causing this? I'm printing from an SD card on a Cartesian",
"not part of the G-code. What could be causing this? I'm printing from",
"back to its original position and resuming the print as normal. I've checked",
"way to the left/front, before very slowly moving back to its original position",
"my G-code files, and the moves are definitely not part of the G-code.",
"files, and the moves are definitely not part of the G-code. What could",
"printer occasionally makes some mystery moves: it will very slowly move either the",
"original position and resuming the print as normal. I've checked my G-code files,",
"the left/front, before very slowly moving back to its original position and resuming",
"the moves are definitely not part of the G-code. What could be causing",
"some mystery moves: it will very slowly move either the X or Y",
"be causing this? I'm printing from an SD card on a Cartesian printer.",
"before very slowly moving back to its original position and resuming the print",
"occasionally makes some mystery moves: it will very slowly move either the X",
"makes some mystery moves: it will very slowly move either the X or",
"moving back to its original position and resuming the print as normal. I've",
"X or Y axis all the way to the left/front, before very slowly",
"it will very slowly move either the X or Y axis all the",
"or Y axis all the way to the left/front, before very slowly moving",
"axis all the way to the left/front, before very slowly moving back to",
"the print as normal. I've checked my G-code files, and the moves are",
"resuming the print as normal. I've checked my G-code files, and the moves",
"print as normal. I've checked my G-code files, and the moves are definitely",
"my printer occasionally makes some mystery moves: it will very slowly move either",
"checked my G-code files, and the moves are definitely not part of the",
"will very slowly move either the X or Y axis all the way",
"the X or Y axis all the way to the left/front, before very",
"move either the X or Y axis all the way to the left/front,",
"printing, my printer occasionally makes some mystery moves: it will very slowly move",
"are definitely not part of the G-code. What could be causing this? I'm",
"What could be causing this? I'm printing from an SD card on a",
"of the G-code. What could be causing this? I'm printing from an SD",
"During printing, my printer occasionally makes some mystery moves: it will very slowly",
"as normal. I've checked my G-code files, and the moves are definitely not",
"position and resuming the print as normal. I've checked my G-code files, and",
"I've checked my G-code files, and the moves are definitely not part of",
"G-code. What could be causing this? I'm printing from an SD card on",
"mystery moves: it will very slowly move either the X or Y axis",
"slowly move either the X or Y axis all the way to the"
] |
[
"down the learning road with two broken printers that I'm rebuilding with better",
"likelihood that any hotend or heatbed that has had the thermistor/thermocouple and/or the",
"constants from experimental data isn't perfect. IMHO, any hotend/heatbed temp on a DIY",
"print quality. Is there a good visual or experimental way to know whether",
"know if my printer was having issues because the \"true\" temperature is only",
"off by a constant ± 5 °C or so, more if it is",
"problem I've experienced is the nozzle clogging after the transistion from layer 1",
"controlled heaters to keep oscillations down to a degree or two Celsius, because",
"printers that I'm rebuilding with better parts and electronics. One thing that I've",
"board swapped with a non-OEM part can be trusted to accurately report it's",
"perfect. IMHO, any hotend/heatbed temp on a DIY setup might be off by",
"supposed to be heated to 220 °C, how would I know if my",
"use PID controlled heaters to keep oscillations down to a degree or two",
"to 220 °C, how would I know if my printer was having issues",
"would I know if my printer was having issues because the \"true\" temperature",
"heat and faster speeds.) It's been a struggle to know which factor (lower",
"which factor (lower heat or faster speeds) are to blame for the clogs",
"temp on a DIY setup might be off by a constant ± 5",
"(lower heat or faster speeds) are to blame for the clogs after the",
"IR thermometers, etc., but each method has limitations. You never know if the",
"= lower heat and faster speeds.) It's been a struggle to know which",
"the same local temp as the printer thermistor. IR thermometers have issues with",
"if it is poorly calibrated. Printers use PID controlled heaters to keep oscillations",
"thing that I've recognized is that there is a pretty low likelihood that",
"is reporting 220 °C? One common problem I've experienced is the nozzle clogging",
"to layer 2. (Layer 1 = higher heat and slower speeds, Layers 2+",
"that there is a pretty low likelihood that any hotend or heatbed that",
"etc., but each method has limitations. You never know if the 2nd thermistor",
"from experimental data isn't perfect. IMHO, any hotend/heatbed temp on a DIY setup",
"the transistion from layer 1 to layer 2. (Layer 1 = higher heat",
"with better parts and electronics. One thing that I've recognized is that there",
"impacts print quality. Is there a good visual or experimental way to know",
"(or 225 °C) when it is reporting 220 °C? One common problem I've",
"more if it is poorly calibrated. Printers use PID controlled heaters to keep",
"ends and build plates) Calibrating the thermistor constants from experimental data isn't perfect.",
"going down the learning road with two broken printers that I'm rebuilding with",
"might be off by a constant ± 5 °C or so, more if",
"because the \"true\" temperature is only 215 °C (or 225 °C) when it",
"own temperature. Sure, there are lots of things I can (and do) do",
"Is there a good visual or experimental way to know whether your temperatures",
"limitations. You never know if the 2nd thermistor is mounted both correctly, or",
"reading the same local temp as the printer thermistor. IR thermometers have issues",
"speeds, Layers 2+ = lower heat and faster speeds.) It's been a struggle",
"a struggle to know which factor (lower heat or faster speeds) are to",
"°C (or 225 °C) when it is reporting 220 °C? One common problem",
"Layers 2+ = lower heat and faster speeds.) It's been a struggle to",
"been a struggle to know which factor (lower heat or faster speeds) are",
"the thermistor constants from experimental data isn't perfect. IMHO, any hotend/heatbed temp on",
"there a good visual or experimental way to know whether your temperatures are",
"can (and do) do to try to make it as accurate as reasonable",
"been going down the learning road with two broken printers that I'm rebuilding",
"was having issues because the \"true\" temperature is only 215 °C (or 225",
"thermistors from multimeters, IR thermometers, etc., but each method has limitations. You never",
"any hotend or heatbed that has had the thermistor/thermocouple and/or the printer board",
"225 °C) when it is reporting 220 °C? One common problem I've experienced",
"temperature is only 215 °C (or 225 °C) when it is reporting 220",
"that I've recognized is that there is a pretty low likelihood that any",
"build plates) Calibrating the thermistor constants from experimental data isn't perfect. IMHO, any",
"and build plates) Calibrating the thermistor constants from experimental data isn't perfect. IMHO,",
"it's own temperature. Sure, there are lots of things I can (and do)",
"never know if the 2nd thermistor is mounted both correctly, or if it",
"DIY setup might be off by a constant ± 5 °C or so,",
"by a constant ± 5 °C or so, more if it is poorly",
"constant ± 5 °C or so, more if it is poorly calibrated. Printers",
"reflective surfaces (like aluminum hot ends and build plates) Calibrating the thermistor constants",
"°C or so, more if it is poorly calibrated. Printers use PID controlled",
"1 to layer 2. (Layer 1 = higher heat and slower speeds, Layers",
"there are lots of things I can (and do) do to try to",
"issues with reflective surfaces (like aluminum hot ends and build plates) Calibrating the",
"to be heated to 220 °C, how would I know if my printer",
"One common problem I've experienced is the nozzle clogging after the transistion from",
"I can (and do) do to try to make it as accurate as",
"poorly calibrated. Printers use PID controlled heaters to keep oscillations down to a",
"printer/filament? IOW, if my filament was supposed to be heated to 220 °C,",
"non-OEM part can be trusted to accurately report it's own temperature. Sure, there",
"1 = higher heat and slower speeds, Layers 2+ = lower heat and",
"part can be trusted to accurately report it's own temperature. Sure, there are",
"Calibrating the thermistor constants from experimental data isn't perfect. IMHO, any hotend/heatbed temp",
"It's been a struggle to know which factor (lower heat or faster speeds)",
"if it is reading the same local temp as the printer thermistor. IR",
"has limitations. You never know if the 2nd thermistor is mounted both correctly,",
"way to know whether your temperatures are \"correct\" for your printer/filament? IOW, if",
"220 °C? One common problem I've experienced is the nozzle clogging after the",
"lots of things I can (and do) do to try to make it",
"I've experienced is the nozzle clogging after the transistion from layer 1 to",
"have issues with reflective surfaces (like aluminum hot ends and build plates) Calibrating",
"two Celsius, because people say it impacts print quality. Is there a good",
"isn't perfect. IMHO, any hotend/heatbed temp on a DIY setup might be off",
"to accurately report it's own temperature. Sure, there are lots of things I",
"data isn't perfect. IMHO, any hotend/heatbed temp on a DIY setup might be",
"IMHO, any hotend/heatbed temp on a DIY setup might be off by a",
"trusted to accurately report it's own temperature. Sure, there are lots of things",
"how would I know if my printer was having issues because the \"true\"",
"know whether your temperatures are \"correct\" for your printer/filament? IOW, if my filament",
"only 215 °C (or 225 °C) when it is reporting 220 °C? One",
"try to make it as accurate as reasonable like calibrating with thermistors from",
"printer board swapped with a non-OEM part can be trusted to accurately report",
"to make it as accurate as reasonable like calibrating with thermistors from multimeters,",
"but each method has limitations. You never know if the 2nd thermistor is",
"IOW, if my filament was supposed to be heated to 220 °C, how",
"= higher heat and slower speeds, Layers 2+ = lower heat and faster",
"it impacts print quality. Is there a good visual or experimental way to",
"215 °C (or 225 °C) when it is reporting 220 °C? One common",
"experienced is the nozzle clogging after the transistion from layer 1 to layer",
"that any hotend or heatbed that has had the thermistor/thermocouple and/or the printer",
"2. (Layer 1 = higher heat and slower speeds, Layers 2+ = lower",
"are lots of things I can (and do) do to try to make",
"(like aluminum hot ends and build plates) Calibrating the thermistor constants from experimental",
"hotend/heatbed temp on a DIY setup might be off by a constant ±",
"220 °C, how would I know if my printer was having issues because",
"good visual or experimental way to know whether your temperatures are \"correct\" for",
"°C? One common problem I've experienced is the nozzle clogging after the transistion",
"higher heat and slower speeds, Layers 2+ = lower heat and faster speeds.)",
"from layer 1 to layer 2. (Layer 1 = higher heat and slower",
"setup might be off by a constant ± 5 °C or so, more",
"swapped with a non-OEM part can be trusted to accurately report it's own",
"local temp as the printer thermistor. IR thermometers have issues with reflective surfaces",
"as the printer thermistor. IR thermometers have issues with reflective surfaces (like aluminum",
"lower heat and faster speeds.) It's been a struggle to know which factor",
"is that there is a pretty low likelihood that any hotend or heatbed",
"the nozzle clogging after the transistion from layer 1 to layer 2. (Layer",
"(and do) do to try to make it as accurate as reasonable like",
"\"true\" temperature is only 215 °C (or 225 °C) when it is reporting",
"and/or the printer board swapped with a non-OEM part can be trusted to",
"reasonable like calibrating with thermistors from multimeters, IR thermometers, etc., but each method",
"I know if my printer was having issues because the \"true\" temperature is",
"heat or faster speeds) are to blame for the clogs after the transition.",
"heatbed that has had the thermistor/thermocouple and/or the printer board swapped with a",
"nozzle clogging after the transistion from layer 1 to layer 2. (Layer 1",
"the printer thermistor. IR thermometers have issues with reflective surfaces (like aluminum hot",
"issues because the \"true\" temperature is only 215 °C (or 225 °C) when",
"is reading the same local temp as the printer thermistor. IR thermometers have",
"speeds.) It's been a struggle to know which factor (lower heat or faster",
"accurate as reasonable like calibrating with thermistors from multimeters, IR thermometers, etc., but",
"learning road with two broken printers that I'm rebuilding with better parts and",
"each method has limitations. You never know if the 2nd thermistor is mounted",
"broken printers that I'm rebuilding with better parts and electronics. One thing that",
"with a non-OEM part can be trusted to accurately report it's own temperature.",
"aluminum hot ends and build plates) Calibrating the thermistor constants from experimental data",
"hotend or heatbed that has had the thermistor/thermocouple and/or the printer board swapped",
"from multimeters, IR thermometers, etc., but each method has limitations. You never know",
"the 2nd thermistor is mounted both correctly, or if it is reading the",
"rebuilding with better parts and electronics. One thing that I've recognized is that",
"I've recognized is that there is a pretty low likelihood that any hotend",
"is mounted both correctly, or if it is reading the same local temp",
"hot ends and build plates) Calibrating the thermistor constants from experimental data isn't",
"temperatures are \"correct\" for your printer/filament? IOW, if my filament was supposed to",
"transistion from layer 1 to layer 2. (Layer 1 = higher heat and",
"recognized is that there is a pretty low likelihood that any hotend or",
"is only 215 °C (or 225 °C) when it is reporting 220 °C?",
"is a pretty low likelihood that any hotend or heatbed that has had",
"thermometers, etc., but each method has limitations. You never know if the 2nd",
"thermistor/thermocouple and/or the printer board swapped with a non-OEM part can be trusted",
"had the thermistor/thermocouple and/or the printer board swapped with a non-OEM part can",
"You never know if the 2nd thermistor is mounted both correctly, or if",
"keep oscillations down to a degree or two Celsius, because people say it",
"the \"true\" temperature is only 215 °C (or 225 °C) when it is",
"°C) when it is reporting 220 °C? One common problem I've experienced is",
"common problem I've experienced is the nozzle clogging after the transistion from layer",
"or heatbed that has had the thermistor/thermocouple and/or the printer board swapped with",
"layer 1 to layer 2. (Layer 1 = higher heat and slower speeds,",
"the thermistor/thermocouple and/or the printer board swapped with a non-OEM part can be",
"heated to 220 °C, how would I know if my printer was having",
"to know which factor (lower heat or faster speeds) are to blame for",
"method has limitations. You never know if the 2nd thermistor is mounted both",
"± 5 °C or so, more if it is poorly calibrated. Printers use",
"printer was having issues because the \"true\" temperature is only 215 °C (or",
"Sure, there are lots of things I can (and do) do to try",
"Printers use PID controlled heaters to keep oscillations down to a degree or",
"correctly, or if it is reading the same local temp as the printer",
"two broken printers that I'm rebuilding with better parts and electronics. One thing",
"a pretty low likelihood that any hotend or heatbed that has had the",
"my printer was having issues because the \"true\" temperature is only 215 °C",
"having issues because the \"true\" temperature is only 215 °C (or 225 °C)",
"know which factor (lower heat or faster speeds) are to blame for the",
"to know whether your temperatures are \"correct\" for your printer/filament? IOW, if my",
"with thermistors from multimeters, IR thermometers, etc., but each method has limitations. You",
"be heated to 220 °C, how would I know if my printer was",
"it as accurate as reasonable like calibrating with thermistors from multimeters, IR thermometers,",
"there is a pretty low likelihood that any hotend or heatbed that has",
"Celsius, because people say it impacts print quality. Is there a good visual",
"it is poorly calibrated. Printers use PID controlled heaters to keep oscillations down",
"or so, more if it is poorly calibrated. Printers use PID controlled heaters",
"and electronics. One thing that I've recognized is that there is a pretty",
"a DIY setup might be off by a constant ± 5 °C or",
"2nd thermistor is mounted both correctly, or if it is reading the same",
"a degree or two Celsius, because people say it impacts print quality. Is",
"better parts and electronics. One thing that I've recognized is that there is",
"know if the 2nd thermistor is mounted both correctly, or if it is",
"thermistor. IR thermometers have issues with reflective surfaces (like aluminum hot ends and",
"slower speeds, Layers 2+ = lower heat and faster speeds.) It's been a",
"mounted both correctly, or if it is reading the same local temp as",
"that has had the thermistor/thermocouple and/or the printer board swapped with a non-OEM",
"I've been going down the learning road with two broken printers that I'm",
"be trusted to accurately report it's own temperature. Sure, there are lots of",
"or two Celsius, because people say it impacts print quality. Is there a",
"clogging after the transistion from layer 1 to layer 2. (Layer 1 =",
"pretty low likelihood that any hotend or heatbed that has had the thermistor/thermocouple",
"low likelihood that any hotend or heatbed that has had the thermistor/thermocouple and/or",
"do) do to try to make it as accurate as reasonable like calibrating",
"plates) Calibrating the thermistor constants from experimental data isn't perfect. IMHO, any hotend/heatbed",
"thermometers have issues with reflective surfaces (like aluminum hot ends and build plates)",
"a constant ± 5 °C or so, more if it is poorly calibrated.",
"is poorly calibrated. Printers use PID controlled heaters to keep oscillations down to",
"it is reporting 220 °C? One common problem I've experienced is the nozzle",
"filament was supposed to be heated to 220 °C, how would I know",
"electronics. One thing that I've recognized is that there is a pretty low",
"heaters to keep oscillations down to a degree or two Celsius, because people",
"your temperatures are \"correct\" for your printer/filament? IOW, if my filament was supposed",
"experimental way to know whether your temperatures are \"correct\" for your printer/filament? IOW,",
"was supposed to be heated to 220 °C, how would I know if",
"is the nozzle clogging after the transistion from layer 1 to layer 2.",
"oscillations down to a degree or two Celsius, because people say it impacts",
"reporting 220 °C? One common problem I've experienced is the nozzle clogging after",
"for your printer/filament? IOW, if my filament was supposed to be heated to",
"down to a degree or two Celsius, because people say it impacts print",
"thermistor is mounted both correctly, or if it is reading the same local",
"your printer/filament? IOW, if my filament was supposed to be heated to 220",
"any hotend/heatbed temp on a DIY setup might be off by a constant",
"to keep oscillations down to a degree or two Celsius, because people say",
"are \"correct\" for your printer/filament? IOW, if my filament was supposed to be",
"temp as the printer thermistor. IR thermometers have issues with reflective surfaces (like",
"with reflective surfaces (like aluminum hot ends and build plates) Calibrating the thermistor",
"because people say it impacts print quality. Is there a good visual or",
"visual or experimental way to know whether your temperatures are \"correct\" for your",
"a non-OEM part can be trusted to accurately report it's own temperature. Sure,",
"to try to make it as accurate as reasonable like calibrating with thermistors",
"°C, how would I know if my printer was having issues because the",
"heat and slower speeds, Layers 2+ = lower heat and faster speeds.) It's",
"and faster speeds.) It's been a struggle to know which factor (lower heat",
"quality. Is there a good visual or experimental way to know whether your",
"2+ = lower heat and faster speeds.) It's been a struggle to know",
"things I can (and do) do to try to make it as accurate",
"of things I can (and do) do to try to make it as",
"both correctly, or if it is reading the same local temp as the",
"calibrating with thermistors from multimeters, IR thermometers, etc., but each method has limitations.",
"multimeters, IR thermometers, etc., but each method has limitations. You never know if",
"thermistor constants from experimental data isn't perfect. IMHO, any hotend/heatbed temp on a",
"or if it is reading the same local temp as the printer thermistor.",
"and slower speeds, Layers 2+ = lower heat and faster speeds.) It's been",
"calibrated. Printers use PID controlled heaters to keep oscillations down to a degree",
"if my filament was supposed to be heated to 220 °C, how would",
"report it's own temperature. Sure, there are lots of things I can (and",
"road with two broken printers that I'm rebuilding with better parts and electronics.",
"be off by a constant ± 5 °C or so, more if it",
"if my printer was having issues because the \"true\" temperature is only 215",
"after the transistion from layer 1 to layer 2. (Layer 1 = higher",
"or experimental way to know whether your temperatures are \"correct\" for your printer/filament?",
"as reasonable like calibrating with thermistors from multimeters, IR thermometers, etc., but each",
"\"correct\" for your printer/filament? IOW, if my filament was supposed to be heated",
"when it is reporting 220 °C? One common problem I've experienced is the",
"(Layer 1 = higher heat and slower speeds, Layers 2+ = lower heat",
"with two broken printers that I'm rebuilding with better parts and electronics. One",
"the learning road with two broken printers that I'm rebuilding with better parts",
"same local temp as the printer thermistor. IR thermometers have issues with reflective",
"to a degree or two Celsius, because people say it impacts print quality.",
"my filament was supposed to be heated to 220 °C, how would I",
"a good visual or experimental way to know whether your temperatures are \"correct\"",
"struggle to know which factor (lower heat or faster speeds) are to blame",
"printer thermistor. IR thermometers have issues with reflective surfaces (like aluminum hot ends",
"if the 2nd thermistor is mounted both correctly, or if it is reading",
"on a DIY setup might be off by a constant ± 5 °C",
"degree or two Celsius, because people say it impacts print quality. Is there",
"I'm rebuilding with better parts and electronics. One thing that I've recognized is",
"surfaces (like aluminum hot ends and build plates) Calibrating the thermistor constants from",
"so, more if it is poorly calibrated. Printers use PID controlled heaters to",
"temperature. Sure, there are lots of things I can (and do) do to",
"it is reading the same local temp as the printer thermistor. IR thermometers",
"PID controlled heaters to keep oscillations down to a degree or two Celsius,",
"like calibrating with thermistors from multimeters, IR thermometers, etc., but each method has",
"say it impacts print quality. Is there a good visual or experimental way",
"the printer board swapped with a non-OEM part can be trusted to accurately",
"IR thermometers have issues with reflective surfaces (like aluminum hot ends and build",
"One thing that I've recognized is that there is a pretty low likelihood",
"has had the thermistor/thermocouple and/or the printer board swapped with a non-OEM part",
"factor (lower heat or faster speeds) are to blame for the clogs after",
"make it as accurate as reasonable like calibrating with thermistors from multimeters, IR",
"faster speeds.) It's been a struggle to know which factor (lower heat or",
"that I'm rebuilding with better parts and electronics. One thing that I've recognized",
"layer 2. (Layer 1 = higher heat and slower speeds, Layers 2+ =",
"people say it impacts print quality. Is there a good visual or experimental",
"do to try to make it as accurate as reasonable like calibrating with",
"accurately report it's own temperature. Sure, there are lots of things I can",
"whether your temperatures are \"correct\" for your printer/filament? IOW, if my filament was",
"parts and electronics. One thing that I've recognized is that there is a",
"can be trusted to accurately report it's own temperature. Sure, there are lots",
"5 °C or so, more if it is poorly calibrated. Printers use PID",
"experimental data isn't perfect. IMHO, any hotend/heatbed temp on a DIY setup might",
"as accurate as reasonable like calibrating with thermistors from multimeters, IR thermometers, etc.,"
] |
[
"x-axis shift, and I need a tension gauge belt to measure the tension.",
"is going crazy with x-axis shift, and I need a tension gauge belt",
"one would be the right fit. Any ideas? What things should I look",
"a 3D printer that is going crazy with x-axis shift, and I need",
"I can't tell which one would be the right fit. Any ideas? What",
"tension. I've never used one before, and looking online, I can't tell which",
"online, I can't tell which one would be the right fit. Any ideas?",
"the tension. I've never used one before, and looking online, I can't tell",
"with x-axis shift, and I need a tension gauge belt to measure the",
"printer that is going crazy with x-axis shift, and I need a tension",
"crazy with x-axis shift, and I need a tension gauge belt to measure",
"never used one before, and looking online, I can't tell which one would",
"tell which one would be the right fit. Any ideas? What things should",
"I've never used one before, and looking online, I can't tell which one",
"I need a tension gauge belt to measure the tension. I've never used",
"need a tension gauge belt to measure the tension. I've never used one",
"and looking online, I can't tell which one would be the right fit.",
"one before, and looking online, I can't tell which one would be the",
"and I need a tension gauge belt to measure the tension. I've never",
"I have a 3D printer that is going crazy with x-axis shift, and",
"tension gauge belt to measure the tension. I've never used one before, and",
"looking online, I can't tell which one would be the right fit. Any",
"3D printer that is going crazy with x-axis shift, and I need a",
"have a 3D printer that is going crazy with x-axis shift, and I",
"that is going crazy with x-axis shift, and I need a tension gauge",
"shift, and I need a tension gauge belt to measure the tension. I've",
"before, and looking online, I can't tell which one would be the right",
"gauge belt to measure the tension. I've never used one before, and looking",
"can't tell which one would be the right fit. Any ideas? What things",
"a tension gauge belt to measure the tension. I've never used one before,",
"going crazy with x-axis shift, and I need a tension gauge belt to",
"belt to measure the tension. I've never used one before, and looking online,",
"which one would be the right fit. Any ideas? What things should I",
"used one before, and looking online, I can't tell which one would be",
"would be the right fit. Any ideas? What things should I look for?",
"measure the tension. I've never used one before, and looking online, I can't",
"to measure the tension. I've never used one before, and looking online, I"
] |
[
"it has, should I be using the speakerwire instead? That isn't listed in",
"a forum somewhere in which people were complaining about the cheapness of the",
"any information in regards to the insulation type or quality and this makes",
"me to believe that the cheapest grade of insulation was used; as I",
"probably lead in the insulation as well as the wire. The largest copper",
"in the table that I have (AWG 10) says that it is rated",
"there is a table with information about the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) of copper wires including",
"choose the correct wire based on the specification in the table. Given that",
"should I be using the speakerwire instead? That isn't listed in the table.",
"wires](https://3dprinting.stackexchange.com/questions/871/is-22-guage-stranded-hookup-wire-the-correct-wire-to-connect-the-switching-power) for my Prusa i3, to go between the power supply and [RAMPS",
"wear gloves when working with it as there is probably lead in the",
"which type of insulation it has, should I be using the speakerwire instead?",
"wire I have found in the table that I have (AWG 10) says",
"As far as I can tell if I use the AWG 10 (TW?)",
"for one to choose the correct wire based on the specification in the",
"check here to be sure first since my power supply is rated at",
"the specification in the table. Given that the thing only cost $30 for",
"looking at wires](https://3dprinting.stackexchange.com/questions/871/is-22-guage-stranded-hookup-wire-the-correct-wire-to-connect-the-switching-power) for my Prusa i3, to go between the power supply",
"$30 for 400 Ft. of wire, it would lead me to believe that",
"table. Also it should be noted that though the ratings for the [Ampacity](https://en.wikipedia.org/wiki/Ampacity)",
"I also recently found a [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) that I bought from",
"additionally speaker wire, Zip Cord and Bell). I also bought some reading material,",
"read a forum somewhere in which people were complaining about the cheapness of",
"found in the table that I have (AWG 10) says that it is",
"that I bought from Harbor Freight which has wire sizes in it from",
"thing only cost $30 for 400 Ft. of wire, it would lead me",
"provide any information in regards to the insulation type or quality and this",
"largest copper wire I have found in the table that I have (AWG",
"Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) does not provide any information in regards to the insulation type",
"picked up [Wiring Simplified 44th edition](http://rads.stackoverflow.com/amzn/click/097929455X), and in it on page 28, Table",
"current (Amps) based on their insulation types. Unfortunately, the [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html)",
"(TW?) to connect everything it won't matter, but I just thought I'd check",
"the max temperatures are different; with the TW being at 60 C. As",
"for my Prusa i3, to go between the power supply and [RAMPS 1.4](http://reprap.org/wiki/RAMPS_1.4),",
"when working with it as there is probably lead in the insulation as",
"it difficult for one to choose the correct wire based on the specification",
"in the table. Given that the thing only cost $30 for 400 Ft.",
"for 400 Ft. of wire, it would lead me to believe that the",
"[400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) that I bought from Harbor Freight which has wire",
"only cost $30 for 400 Ft. of wire, it would lead me to",
"10) says that it is rated at 30 AMP regardless of which type",
"table with information about the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) of copper wires including their maximum temp",
"to connect everything it won't matter, but I just thought I'd check here",
"on page 28, Table 4-1, there is a table with information about the",
"table. Given that the thing only cost $30 for 400 Ft. of wire,",
"also bought some reading material, I picked up [Wiring Simplified 44th edition](http://rads.stackoverflow.com/amzn/click/097929455X), and",
"information about the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) of copper wires including their maximum temp (C), and",
"quality and this makes it difficult for one to choose the correct wire",
"insulation it has, should I be using the speakerwire instead? That isn't listed",
"that the thing only cost $30 for 400 Ft. of wire, it would",
"ratings for the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) are 30 AMPs, the max temperatures are different; with",
"understand it, the TW type wire. I also read a forum somewhere in",
"with it as there is probably lead in the insulation as well as",
"isn't listed in the table. Also it should be noted that though the",
"is a table with information about the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) of copper wires including their",
"wires including their maximum temp (C), and maximum carrying current (Amps) based on",
"won't matter, but I just thought I'd check here to be sure first",
"wire. The largest copper wire I have found in the table that I",
"which people were complaining about the cheapness of the wire in this kit,",
"(and additionally speaker wire, Zip Cord and Bell). I also bought some reading",
"people were complaining about the cheapness of the wire in this kit, stating",
"just thought I'd check here to be sure first since my power supply",
"with the TW being at 60 C. As far as I can tell",
"[Ampacity](https://en.wikipedia.org/wiki/Ampacity) of copper wires including their maximum temp (C), and maximum carrying current",
"which has wire sizes in it from AWG 10 through AWG 22 (and",
"C. As far as I can tell if I use the AWG 10",
"[RAMPS 1.4](http://reprap.org/wiki/RAMPS_1.4), and [the power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and the [MK2a Heatbed](http://reprap.org/wiki/PCB_Heatbed#MK2.2C_MK2a). I also recently",
"or quality and this makes it difficult for one to choose the correct",
"has, should I be using the speakerwire instead? That isn't listed in the",
"the correct wire based on the specification in the table. Given that the",
"of copper wires including their maximum temp (C), and maximum carrying current (Amps)",
"one to choose the correct wire based on the specification in the table.",
"it, the TW type wire. I also read a forum somewhere in which",
"temp (C), and maximum carrying current (Amps) based on their insulation types. Unfortunately,",
"noted that though the ratings for the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) are 30 AMPs, the max",
"[MK2a Heatbed](http://reprap.org/wiki/PCB_Heatbed#MK2.2C_MK2a). I also recently found a [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) that I",
"I have found in the table that I have (AWG 10) says that",
"as there is probably lead in the insulation as well as the wire.",
"lead in the insulation as well as the wire. The largest copper wire",
"information in regards to the insulation type or quality and this makes it",
"in regards to the insulation type or quality and this makes it difficult",
"I can tell if I use the AWG 10 (TW?) to connect everything",
"that I have (AWG 10) says that it is rated at 30 AMP",
"here to be sure first since my power supply is rated at 30",
"in the table. Also it should be noted that though the ratings for",
"copper wires including their maximum temp (C), and maximum carrying current (Amps) based",
"I use the AWG 10 (TW?) to connect everything it won't matter, but",
"that one ought to wear gloves when working with it as there is",
"used; as I understand it, the TW type wire. I also read a",
"as I understand it, the TW type wire. I also read a forum",
"correct wire based on the specification in the table. Given that the thing",
"I picked up [Wiring Simplified 44th edition](http://rads.stackoverflow.com/amzn/click/097929455X), and in it on page 28,",
"the wire in this kit, stating that one ought to wear gloves when",
"sure first since my power supply is rated at 30 AMPs and that's",
"the speakerwire instead? That isn't listed in the table. Also it should be",
"(C), and maximum carrying current (Amps) based on their insulation types. Unfortunately, the",
"go between the power supply and [RAMPS 1.4](http://reprap.org/wiki/RAMPS_1.4), and [the power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and",
"in which people were complaining about the cheapness of the wire in this",
"difficult for one to choose the correct wire based on the specification in",
"the thing only cost $30 for 400 Ft. of wire, it would lead",
"specification in the table. Given that the thing only cost $30 for 400",
"insulation types. Unfortunately, the [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) does not provide any information",
"material, I picked up [Wiring Simplified 44th edition](http://rads.stackoverflow.com/amzn/click/097929455X), and in it on page",
"and [RAMPS 1.4](http://reprap.org/wiki/RAMPS_1.4), and [the power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and the [MK2a Heatbed](http://reprap.org/wiki/PCB_Heatbed#MK2.2C_MK2a). I also",
"one ought to wear gloves when working with it as there is probably",
"[Wiring Simplified 44th edition](http://rads.stackoverflow.com/amzn/click/097929455X), and in it on page 28, Table 4-1, there",
"listed in the table. Also it should be noted that though the ratings",
"matter, but I just thought I'd check here to be sure first since",
"between the power supply and [RAMPS 1.4](http://reprap.org/wiki/RAMPS_1.4), and [the power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and the",
"to the insulation type or quality and this makes it difficult for one",
"the insulation as well as the wire. The largest copper wire I have",
"are 30 AMPs, the max temperatures are different; with the TW being at",
"the table that I have (AWG 10) says that it is rated at",
"wire. I also read a forum somewhere in which people were complaining about",
"I also bought some reading material, I picked up [Wiring Simplified 44th edition](http://rads.stackoverflow.com/amzn/click/097929455X),",
"and Bell). I also bought some reading material, I picked up [Wiring Simplified",
"TW type wire. I also read a forum somewhere in which people were",
"wire, it would lead me to believe that the cheapest grade of insulation",
"page 28, Table 4-1, there is a table with information about the [Ampacity](https://en.wikipedia.org/wiki/Ampacity)",
"cheapness of the wire in this kit, stating that one ought to wear",
"1.4](http://reprap.org/wiki/RAMPS_1.4), and [the power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and the [MK2a Heatbed](http://reprap.org/wiki/PCB_Heatbed#MK2.2C_MK2a). I also recently found",
"edition](http://rads.stackoverflow.com/amzn/click/097929455X), and in it on page 28, Table 4-1, there is a table",
"and [the power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and the [MK2a Heatbed](http://reprap.org/wiki/PCB_Heatbed#MK2.2C_MK2a). I also recently found a",
"Given that the thing only cost $30 for 400 Ft. of wire, it",
"4-1, there is a table with information about the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) of copper wires",
"Also it should be noted that though the ratings for the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) are",
"30 AMP regardless of which type of insulation it has, should I be",
"somewhere in which people were complaining about the cheapness of the wire in",
"the [MK2a Heatbed](http://reprap.org/wiki/PCB_Heatbed#MK2.2C_MK2a). I also recently found a [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) that",
"does not provide any information in regards to the insulation type or quality",
"10 through AWG 22 (and additionally speaker wire, Zip Cord and Bell). I",
"as I can tell if I use the AWG 10 (TW?) to connect",
"max temperatures are different; with the TW being at 60 C. As far",
"in this kit, stating that one ought to wear gloves when working with",
"and maximum carrying current (Amps) based on their insulation types. Unfortunately, the [400",
"ought to wear gloves when working with it as there is probably lead",
"says that it is rated at 30 AMP regardless of which type of",
"[the power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and the [MK2a Heatbed](http://reprap.org/wiki/PCB_Heatbed#MK2.2C_MK2a). I also recently found a [400",
"the ratings for the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) are 30 AMPs, the max temperatures are different;",
"to go between the power supply and [RAMPS 1.4](http://reprap.org/wiki/RAMPS_1.4), and [the power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI)",
"power supply is rated at 30 AMPs and that's probably the same as",
"about the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) of copper wires including their maximum temp (C), and maximum",
"the wire. The largest copper wire I have found in the table that",
"as well as the wire. The largest copper wire I have found in",
"[Ampacity](https://en.wikipedia.org/wiki/Ampacity) are 30 AMPs, the max temperatures are different; with the TW being",
"complaining about the cheapness of the wire in this kit, stating that one",
"Freight which has wire sizes in it from AWG 10 through AWG 22",
"insulation as well as the wire. The largest copper wire I have found",
"temperatures are different; with the TW being at 60 C. As far as",
"up [Wiring Simplified 44th edition](http://rads.stackoverflow.com/amzn/click/097929455X), and in it on page 28, Table 4-1,",
"[I'm still looking at wires](https://3dprinting.stackexchange.com/questions/871/is-22-guage-stranded-hookup-wire-the-correct-wire-to-connect-the-switching-power) for my Prusa i3, to go between the",
"my power supply is rated at 30 AMPs and that's probably the same",
"using the speakerwire instead? That isn't listed in the table. Also it should",
"speakerwire instead? That isn't listed in the table. Also it should be noted",
"of the wire in this kit, stating that one ought to wear gloves",
"has wire sizes in it from AWG 10 through AWG 22 (and additionally",
"are different; with the TW being at 60 C. As far as I",
"kit, stating that one ought to wear gloves when working with it as",
"to choose the correct wire based on the specification in the table. Given",
"would lead me to believe that the cheapest grade of insulation was used;",
"regards to the insulation type or quality and this makes it difficult for",
"this makes it difficult for one to choose the correct wire based on",
"Heatbed](http://reprap.org/wiki/PCB_Heatbed#MK2.2C_MK2a). I also recently found a [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) that I bought",
"44th edition](http://rads.stackoverflow.com/amzn/click/097929455X), and in it on page 28, Table 4-1, there is a",
"the cheapest grade of insulation was used; as I understand it, the TW",
"ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) that I bought from Harbor Freight which has wire sizes",
"if I use the AWG 10 (TW?) to connect everything it won't matter,",
"maximum temp (C), and maximum carrying current (Amps) based on their insulation types.",
"and this makes it difficult for one to choose the correct wire based",
"I also read a forum somewhere in which people were complaining about the",
"sizes in it from AWG 10 through AWG 22 (and additionally speaker wire,",
"the insulation type or quality and this makes it difficult for one to",
"ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) does not provide any information in regards to the insulation",
"makes it difficult for one to choose the correct wire based on the",
"AWG 10 through AWG 22 (and additionally speaker wire, Zip Cord and Bell).",
"power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and the [MK2a Heatbed](http://reprap.org/wiki/PCB_Heatbed#MK2.2C_MK2a). I also recently found a [400 ft.",
"that it is rated at 30 AMP regardless of which type of insulation",
"instead? That isn't listed in the table. Also it should be noted that",
"the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) are 30 AMPs, the max temperatures are different; with the TW",
"28, Table 4-1, there is a table with information about the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) of",
"400 Ft. of wire, it would lead me to believe that the cheapest",
"wire in this kit, stating that one ought to wear gloves when working",
"power supply and [RAMPS 1.4](http://reprap.org/wiki/RAMPS_1.4), and [the power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and the [MK2a Heatbed](http://reprap.org/wiki/PCB_Heatbed#MK2.2C_MK2a).",
"found a [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) that I bought from Harbor Freight which",
"from Harbor Freight which has wire sizes in it from AWG 10 through",
"in it from AWG 10 through AWG 22 (and additionally speaker wire, Zip",
"as the wire. The largest copper wire I have found in the table",
"I understand it, the TW type wire. I also read a forum somewhere",
"Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) that I bought from Harbor Freight which has wire sizes in",
"is rated at 30 AMP regardless of which type of insulation it has,",
"from AWG 10 through AWG 22 (and additionally speaker wire, Zip Cord and",
"of which type of insulation it has, should I be using the speakerwire",
"it from AWG 10 through AWG 22 (and additionally speaker wire, Zip Cord",
"believe that the cheapest grade of insulation was used; as I understand it,",
"maximum carrying current (Amps) based on their insulation types. Unfortunately, the [400 ft.",
"Ft. of wire, it would lead me to believe that the cheapest grade",
"including their maximum temp (C), and maximum carrying current (Amps) based on their",
"carrying current (Amps) based on their insulation types. Unfortunately, the [400 ft. Wire",
"tell if I use the AWG 10 (TW?) to connect everything it won't",
"the TW being at 60 C. As far as I can tell if",
"of wire, it would lead me to believe that the cheapest grade of",
"of insulation it has, should I be using the speakerwire instead? That isn't",
"TW being at 60 C. As far as I can tell if I",
"since my power supply is rated at 30 AMPs and that's probably the",
"that the cheapest grade of insulation was used; as I understand it, the",
"supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and the [MK2a Heatbed](http://reprap.org/wiki/PCB_Heatbed#MK2.2C_MK2a). I also recently found a [400 ft. Wire",
"AWG 10 (TW?) to connect everything it won't matter, but I just thought",
"table that I have (AWG 10) says that it is rated at 30",
"to be sure first since my power supply is rated at 30 AMPs",
"have found in the table that I have (AWG 10) says that it",
"thought I'd check here to be sure first since my power supply is",
"but I just thought I'd check here to be sure first since my",
"bought from Harbor Freight which has wire sizes in it from AWG 10",
"at wires](https://3dprinting.stackexchange.com/questions/871/is-22-guage-stranded-hookup-wire-the-correct-wire-to-connect-the-switching-power) for my Prusa i3, to go between the power supply and",
"forum somewhere in which people were complaining about the cheapness of the wire",
"Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) that I bought from Harbor Freight which has wire sizes in it",
"based on their insulation types. Unfortunately, the [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) does not",
"stating that one ought to wear gloves when working with it as there",
"was used; as I understand it, the TW type wire. I also read",
"the [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) does not provide any information in regards to",
"and in it on page 28, Table 4-1, there is a table with",
"insulation type or quality and this makes it difficult for one to choose",
"copper wire I have found in the table that I have (AWG 10)",
"type of insulation it has, should I be using the speakerwire instead? That",
"of insulation was used; as I understand it, the TW type wire. I",
"30 AMPs, the max temperatures are different; with the TW being at 60",
"also read a forum somewhere in which people were complaining about the cheapness",
"their insulation types. Unfortunately, the [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) does not provide any",
"well as the wire. The largest copper wire I have found in the",
"supply is rated at 30 AMPs and that's probably the same as the",
"The largest copper wire I have found in the table that I have",
"use the AWG 10 (TW?) to connect everything it won't matter, but I",
"still looking at wires](https://3dprinting.stackexchange.com/questions/871/is-22-guage-stranded-hookup-wire-the-correct-wire-to-connect-the-switching-power) for my Prusa i3, to go between the power",
"wire, Zip Cord and Bell). I also bought some reading material, I picked",
"first since my power supply is rated at 30 AMPs and that's probably",
"be sure first since my power supply is rated at 30 AMPs and",
"(AWG 10) says that it is rated at 30 AMP regardless of which",
"AWG 22 (and additionally speaker wire, Zip Cord and Bell). I also bought",
"the power supply and [RAMPS 1.4](http://reprap.org/wiki/RAMPS_1.4), and [the power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and the [MK2a",
"not provide any information in regards to the insulation type or quality and",
"I just thought I'd check here to be sure first since my power",
"should be noted that though the ratings for the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) are 30 AMPs,",
"be using the speakerwire instead? That isn't listed in the table. Also it",
"insulation was used; as I understand it, the TW type wire. I also",
"Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) does not provide any information in regards to the insulation type or",
"Unfortunately, the [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) does not provide any information in regards",
"reading material, I picked up [Wiring Simplified 44th edition](http://rads.stackoverflow.com/amzn/click/097929455X), and in it on",
"Harbor Freight which has wire sizes in it from AWG 10 through AWG",
"there is probably lead in the insulation as well as the wire. The",
"have (AWG 10) says that it is rated at 30 AMP regardless of",
"22 (and additionally speaker wire, Zip Cord and Bell). I also bought some",
"Prusa i3, to go between the power supply and [RAMPS 1.4](http://reprap.org/wiki/RAMPS_1.4), and [the",
"cost $30 for 400 Ft. of wire, it would lead me to believe",
"Bell). I also bought some reading material, I picked up [Wiring Simplified 44th",
"based on the specification in the table. Given that the thing only cost",
"about the cheapness of the wire in this kit, stating that one ought",
"wire based on the specification in the table. Given that the thing only",
"it won't matter, but I just thought I'd check here to be sure",
"Zip Cord and Bell). I also bought some reading material, I picked up",
"in the insulation as well as the wire. The largest copper wire I",
"I be using the speakerwire instead? That isn't listed in the table. Also",
"to wear gloves when working with it as there is probably lead in",
"that though the ratings for the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) are 30 AMPs, the max temperatures",
"everything it won't matter, but I just thought I'd check here to be",
"my Prusa i3, to go between the power supply and [RAMPS 1.4](http://reprap.org/wiki/RAMPS_1.4), and",
"on their insulation types. Unfortunately, the [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) does not provide",
"at 30 AMP regardless of which type of insulation it has, should I",
"connect everything it won't matter, but I just thought I'd check here to",
"AMP regardless of which type of insulation it has, should I be using",
"the table. Also it should be noted that though the ratings for the",
"supply and [RAMPS 1.4](http://reprap.org/wiki/RAMPS_1.4), and [the power supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) and the [MK2a Heatbed](http://reprap.org/wiki/PCB_Heatbed#MK2.2C_MK2a). I",
"[400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) does not provide any information in regards to the",
"to believe that the cheapest grade of insulation was used; as I understand",
"far as I can tell if I use the AWG 10 (TW?) to",
"being at 60 C. As far as I can tell if I use",
"it would lead me to believe that the cheapest grade of insulation was",
"were complaining about the cheapness of the wire in this kit, stating that",
"regardless of which type of insulation it has, should I be using the",
"I'd check here to be sure first since my power supply is rated",
"grade of insulation was used; as I understand it, the TW type wire.",
"through AWG 22 (and additionally speaker wire, Zip Cord and Bell). I also",
"at 60 C. As far as I can tell if I use the",
"for the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) are 30 AMPs, the max temperatures are different; with the",
"with information about the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) of copper wires including their maximum temp (C),",
"a [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) that I bought from Harbor Freight which has",
"AMPs, the max temperatures are different; with the TW being at 60 C.",
"speaker wire, Zip Cord and Bell). I also bought some reading material, I",
"lead me to believe that the cheapest grade of insulation was used; as",
"wire sizes in it from AWG 10 through AWG 22 (and additionally speaker",
"and the [MK2a Heatbed](http://reprap.org/wiki/PCB_Heatbed#MK2.2C_MK2a). I also recently found a [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html)",
"recently found a [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) that I bought from Harbor Freight",
"it should be noted that though the ratings for the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) are 30",
"Table 4-1, there is a table with information about the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) of copper",
"I have (AWG 10) says that it is rated at 30 AMP regardless",
"also recently found a [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) that I bought from Harbor",
"is probably lead in the insulation as well as the wire. The largest",
"Simplified 44th edition](http://rads.stackoverflow.com/amzn/click/097929455X), and in it on page 28, Table 4-1, there is",
"60 C. As far as I can tell if I use the AWG",
"it is rated at 30 AMP regardless of which type of insulation it",
"the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) of copper wires including their maximum temp (C), and maximum carrying",
"bought some reading material, I picked up [Wiring Simplified 44th edition](http://rads.stackoverflow.com/amzn/click/097929455X), and in",
"gloves when working with it as there is probably lead in the insulation",
"I bought from Harbor Freight which has wire sizes in it from AWG",
"their maximum temp (C), and maximum carrying current (Amps) based on their insulation",
"the table. Given that the thing only cost $30 for 400 Ft. of",
"can tell if I use the AWG 10 (TW?) to connect everything it",
"though the ratings for the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) are 30 AMPs, the max temperatures are",
"types. Unfortunately, the [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) does not provide any information in",
"the cheapness of the wire in this kit, stating that one ought to",
"be noted that though the ratings for the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) are 30 AMPs, the",
"the TW type wire. I also read a forum somewhere in which people",
"Cord and Bell). I also bought some reading material, I picked up [Wiring",
"it as there is probably lead in the insulation as well as the",
"type wire. I also read a forum somewhere in which people were complaining",
"type or quality and this makes it difficult for one to choose the",
"the AWG 10 (TW?) to connect everything it won't matter, but I just",
"cheapest grade of insulation was used; as I understand it, the TW type",
"That isn't listed in the table. Also it should be noted that though",
"10 (TW?) to connect everything it won't matter, but I just thought I'd",
"(Amps) based on their insulation types. Unfortunately, the [400 ft. Wire Storehouse](http://www.harborfreight.com/400-ft-wire-storehouse-61527.html) does",
"this kit, stating that one ought to wear gloves when working with it",
"is rated at 30 AMPs and that's probably the same as the wire....",
"in it on page 28, Table 4-1, there is a table with information",
"i3, to go between the power supply and [RAMPS 1.4](http://reprap.org/wiki/RAMPS_1.4), and [the power",
"rated at 30 AMP regardless of which type of insulation it has, should",
"some reading material, I picked up [Wiring Simplified 44th edition](http://rads.stackoverflow.com/amzn/click/097929455X), and in it",
"on the specification in the table. Given that the thing only cost $30",
"a table with information about the [Ampacity](https://en.wikipedia.org/wiki/Ampacity) of copper wires including their maximum",
"different; with the TW being at 60 C. As far as I can",
"it on page 28, Table 4-1, there is a table with information about",
"working with it as there is probably lead in the insulation as well"
] |
[
"pressure from the strongly clamped glass plate be enough or will the glass",
"a Prusa heatbed PCB? If so, can I apply the heat by the",
"utilize an oven? Will the pressure from the strongly clamped glass plate be",
"PCB? If so, can I apply the heat by the heatbed itself, or",
"mm with respect to all edges. I have found this thread [Warped PCBs](http://midibox.org/forums/topic/17599-warped-pcbs/),",
"elevated about 3 mm with respect to all edges. I have found this",
"the middle is elevated about 3 mm with respect to all edges. I",
"Repair](http://www.circuitrework.com/guides/3-2.shtml). Can this help straightening out a Prusa heatbed PCB? If so, can",
"method is applied by baking a PCB in the oven, as described here:",
"can I apply the heat by the heatbed itself, or do I need",
"strongly clamped glass plate be enough or will the glass break at these",
"Can this help straightening out a Prusa heatbed PCB? If so, can I",
"from the strongly clamped glass plate be enough or will the glass break",
"by baking a PCB in the oven, as described here: [3.2 Bow and",
"a heating method is applied by baking a PCB in the oven, as",
"applied by baking a PCB in the oven, as described here: [3.2 Bow",
"by the heatbed itself, or do I need to utilize an oven? Will",
"out a Prusa heatbed PCB? If so, can I apply the heat by",
"the glass break at these temperatures (given that the heatbed can reach them).",
"oven? Will the pressure from the strongly clamped glass plate be enough or",
"heatbed itself, or do I need to utilize an oven? Will the pressure",
"to utilize an oven? Will the pressure from the strongly clamped glass plate",
"the oven, as described here: [3.2 Bow and Twist Repair](http://www.circuitrework.com/guides/3-2.shtml). Can this help",
"described here: [3.2 Bow and Twist Repair](http://www.circuitrework.com/guides/3-2.shtml). Can this help straightening out a",
"in the oven, as described here: [3.2 Bow and Twist Repair](http://www.circuitrework.com/guides/3-2.shtml). Can this",
"have found this thread [Warped PCBs](http://midibox.org/forums/topic/17599-warped-pcbs/), where a heating method is applied by",
"as described here: [3.2 Bow and Twist Repair](http://www.circuitrework.com/guides/3-2.shtml). Can this help straightening out",
"to all edges. I have found this thread [Warped PCBs](http://midibox.org/forums/topic/17599-warped-pcbs/), where a heating",
"the strongly clamped glass plate be enough or will the glass break at",
"have a really bent heatbed PCB, the middle is elevated about 3 mm",
"clamped glass plate be enough or will the glass break at these temperatures",
"I need to utilize an oven? Will the pressure from the strongly clamped",
"a PCB in the oven, as described here: [3.2 Bow and Twist Repair](http://www.circuitrework.com/guides/3-2.shtml).",
"need to utilize an oven? Will the pressure from the strongly clamped glass",
"heatbed PCB? If so, can I apply the heat by the heatbed itself,",
"plate be enough or will the glass break at these temperatures (given that",
"3 mm with respect to all edges. I have found this thread [Warped",
"where a heating method is applied by baking a PCB in the oven,",
"really bent heatbed PCB, the middle is elevated about 3 mm with respect",
"I have a really bent heatbed PCB, the middle is elevated about 3",
"a really bent heatbed PCB, the middle is elevated about 3 mm with",
"is elevated about 3 mm with respect to all edges. I have found",
"oven, as described here: [3.2 Bow and Twist Repair](http://www.circuitrework.com/guides/3-2.shtml). Can this help straightening",
"an oven? Will the pressure from the strongly clamped glass plate be enough",
"or will the glass break at these temperatures (given that the heatbed can",
"Will the pressure from the strongly clamped glass plate be enough or will",
"baking a PCB in the oven, as described here: [3.2 Bow and Twist",
"with respect to all edges. I have found this thread [Warped PCBs](http://midibox.org/forums/topic/17599-warped-pcbs/), where",
"apply the heat by the heatbed itself, or do I need to utilize",
"so, can I apply the heat by the heatbed itself, or do I",
"bent heatbed PCB, the middle is elevated about 3 mm with respect to",
"be enough or will the glass break at these temperatures (given that the",
"heating method is applied by baking a PCB in the oven, as described",
"middle is elevated about 3 mm with respect to all edges. I have",
"and Twist Repair](http://www.circuitrework.com/guides/3-2.shtml). Can this help straightening out a Prusa heatbed PCB? If",
"help straightening out a Prusa heatbed PCB? If so, can I apply the",
"Bow and Twist Repair](http://www.circuitrework.com/guides/3-2.shtml). Can this help straightening out a Prusa heatbed PCB?",
"this thread [Warped PCBs](http://midibox.org/forums/topic/17599-warped-pcbs/), where a heating method is applied by baking a",
"here: [3.2 Bow and Twist Repair](http://www.circuitrework.com/guides/3-2.shtml). Can this help straightening out a Prusa",
"[Warped PCBs](http://midibox.org/forums/topic/17599-warped-pcbs/), where a heating method is applied by baking a PCB in",
"will the glass break at these temperatures (given that the heatbed can reach",
"edges. I have found this thread [Warped PCBs](http://midibox.org/forums/topic/17599-warped-pcbs/), where a heating method is",
"all edges. I have found this thread [Warped PCBs](http://midibox.org/forums/topic/17599-warped-pcbs/), where a heating method",
"heat by the heatbed itself, or do I need to utilize an oven?",
"the pressure from the strongly clamped glass plate be enough or will the",
"PCB, the middle is elevated about 3 mm with respect to all edges.",
"glass plate be enough or will the glass break at these temperatures (given",
"Prusa heatbed PCB? If so, can I apply the heat by the heatbed",
"PCBs](http://midibox.org/forums/topic/17599-warped-pcbs/), where a heating method is applied by baking a PCB in the",
"the heat by the heatbed itself, or do I need to utilize an",
"respect to all edges. I have found this thread [Warped PCBs](http://midibox.org/forums/topic/17599-warped-pcbs/), where a",
"heatbed PCB, the middle is elevated about 3 mm with respect to all",
"I apply the heat by the heatbed itself, or do I need to",
"I have found this thread [Warped PCBs](http://midibox.org/forums/topic/17599-warped-pcbs/), where a heating method is applied",
"PCB in the oven, as described here: [3.2 Bow and Twist Repair](http://www.circuitrework.com/guides/3-2.shtml). Can",
"or do I need to utilize an oven? Will the pressure from the",
"Twist Repair](http://www.circuitrework.com/guides/3-2.shtml). Can this help straightening out a Prusa heatbed PCB? If so,",
"the heatbed itself, or do I need to utilize an oven? Will the",
"If so, can I apply the heat by the heatbed itself, or do",
"straightening out a Prusa heatbed PCB? If so, can I apply the heat",
"thread [Warped PCBs](http://midibox.org/forums/topic/17599-warped-pcbs/), where a heating method is applied by baking a PCB",
"itself, or do I need to utilize an oven? Will the pressure from",
"is applied by baking a PCB in the oven, as described here: [3.2",
"do I need to utilize an oven? Will the pressure from the strongly",
"enough or will the glass break at these temperatures (given that the heatbed",
"about 3 mm with respect to all edges. I have found this thread",
"this help straightening out a Prusa heatbed PCB? If so, can I apply",
"found this thread [Warped PCBs](http://midibox.org/forums/topic/17599-warped-pcbs/), where a heating method is applied by baking",
"[3.2 Bow and Twist Repair](http://www.circuitrework.com/guides/3-2.shtml). Can this help straightening out a Prusa heatbed"
] |
[
"the food-safe materials and how do I recognize them?](https://3dprinting.stackexchange.com/questions/147/which-are-the-food-safe-materials-and-how-do-i-recognize-them) please read** I need",
"read** I need to know if [this 3D Ink™ (PLA Filament)](http://store.printm3d.com/#filaments_head_scroll) is food",
"**Before you put duplicate from this [Which are the food-safe materials and how",
"from this [Which are the food-safe materials and how do I recognize them?](https://3dprinting.stackexchange.com/questions/147/which-are-the-food-safe-materials-and-how-do-i-recognize-them)",
"duplicate from this [Which are the food-safe materials and how do I recognize",
"I recognize them?](https://3dprinting.stackexchange.com/questions/147/which-are-the-food-safe-materials-and-how-do-i-recognize-them) please read** I need to know if [this 3D Ink™",
"I need to know if [this 3D Ink™ (PLA Filament)](http://store.printm3d.com/#filaments_head_scroll) is food safe[ please read** I need to know if [this 3D Ink™ (PLA Filament)](http://store.printm3d.com/#filaments_head_scroll)",
"need to know if [this 3D Ink™ (PLA Filament)](http://store.printm3d.com/#filaments_head_scroll) is food safe[](https://i.stack.imgur.com/lNh2d.png)",
"materials and how do I recognize them?](https://3dprinting.stackexchange.com/questions/147/which-are-the-food-safe-materials-and-how-do-i-recognize-them) please read** I need to know",
"how do I recognize them?](https://3dprinting.stackexchange.com/questions/147/which-are-the-food-safe-materials-and-how-do-i-recognize-them) please read** I need to know if [this",
"are the food-safe materials and how do I recognize them?](https://3dprinting.stackexchange.com/questions/147/which-are-the-food-safe-materials-and-how-do-i-recognize-them) please read** I",
"put duplicate from this [Which are the food-safe materials and how do I",
"please read** I need to know if [this 3D Ink™ (PLA Filament)](http://store.printm3d.com/#filaments_head_scroll) is",
"and how do I recognize them?](https://3dprinting.stackexchange.com/questions/147/which-are-the-food-safe-materials-and-how-do-i-recognize-them) please read** I need to know if",
"this [Which are the food-safe materials and how do I recognize them?](https://3dprinting.stackexchange.com/questions/147/which-are-the-food-safe-materials-and-how-do-i-recognize-them) please",
"[Which are the food-safe materials and how do I recognize them?](https://3dprinting.stackexchange.com/questions/147/which-are-the-food-safe-materials-and-how-do-i-recognize-them) please read**",
"food-safe materials and how do I recognize them?](https://3dprinting.stackexchange.com/questions/147/which-are-the-food-safe-materials-and-how-do-i-recognize-them) please read** I need to",
"do I recognize them?](https://3dprinting.stackexchange.com/questions/147/which-are-the-food-safe-materials-and-how-do-i-recognize-them) please read** I need to know if [this 3D",
"recognize them?](https://3dprinting.stackexchange.com/questions/147/which-are-the-food-safe-materials-and-how-do-i-recognize-them) please read** I need to know if [this 3D Ink™ (PLA"
] |
[
"elements will turn off. Pressing the reset button on the RAMPS restarts the",
"bad, but is there anything else I should check before I buy a",
"is the power supply (12V 30A) is going bad, but is there anything",
"it has been randomly stopping during prints. The LCD screen will lock up,",
"I replaced the power supply with a new one, and the printer did",
"with a new one, and the printer did not stop and completed a",
"while on. My first thought is the power supply (12V 30A) is going",
"works fine. In addition to stopping during prints, it has also frozen up",
"LCD screen will lock up, the print will stop, and the heating elements",
"and a RAMPS board. Recently it has been randomly stopping during prints. The",
"reset button on the RAMPS restarts the system and it works fine. In",
"also frozen up while just sitting while on. My first thought is the",
"during prints. The LCD screen will lock up, the print will stop, and",
"has been randomly stopping during prints. The LCD screen will lock up, the",
"I have a prusa i3 with Mendel firmware and a RAMPS board. Recently",
"printer did not stop and completed a print. I am voting to close",
"system and it works fine. In addition to stopping during prints, it has",
"else I should check before I buy a new one and replace it?",
"prints, it has also frozen up while just sitting while on. My first",
"a new one, and the printer did not stop and completed a print.",
"and it works fine. In addition to stopping during prints, it has also",
"frozen up while just sitting while on. My first thought is the power",
"i3 with Mendel firmware and a RAMPS board. Recently it has been randomly",
"will lock up, the print will stop, and the heating elements will turn",
"on the RAMPS restarts the system and it works fine. In addition to",
"stopping during prints, it has also frozen up while just sitting while on.",
"it has also frozen up while just sitting while on. My first thought",
"lock up, the print will stop, and the heating elements will turn off.",
"Recently it has been randomly stopping during prints. The LCD screen will lock",
"I should check before I buy a new one and replace it? Update:",
"power supply with a new one, and the printer did not stop and",
"the heating elements will turn off. Pressing the reset button on the RAMPS",
"have a prusa i3 with Mendel firmware and a RAMPS board. Recently it",
"screen will lock up, the print will stop, and the heating elements will",
"just sitting while on. My first thought is the power supply (12V 30A)",
"a RAMPS board. Recently it has been randomly stopping during prints. The LCD",
"Update: I replaced the power supply with a new one, and the printer",
"did not stop and completed a print. I am voting to close the",
"addition to stopping during prints, it has also frozen up while just sitting",
"replace it? Update: I replaced the power supply with a new one, and",
"prusa i3 with Mendel firmware and a RAMPS board. Recently it has been",
"stop, and the heating elements will turn off. Pressing the reset button on",
"restarts the system and it works fine. In addition to stopping during prints,",
"stopping during prints. The LCD screen will lock up, the print will stop,",
"going bad, but is there anything else I should check before I buy",
"is there anything else I should check before I buy a new one",
"power supply (12V 30A) is going bad, but is there anything else I",
"supply (12V 30A) is going bad, but is there anything else I should",
"board. Recently it has been randomly stopping during prints. The LCD screen will",
"and the heating elements will turn off. Pressing the reset button on the",
"the print will stop, and the heating elements will turn off. Pressing the",
"on. My first thought is the power supply (12V 30A) is going bad,",
"and replace it? Update: I replaced the power supply with a new one,",
"prints. The LCD screen will lock up, the print will stop, and the",
"My first thought is the power supply (12V 30A) is going bad, but",
"the RAMPS restarts the system and it works fine. In addition to stopping",
"been randomly stopping during prints. The LCD screen will lock up, the print",
"supply with a new one, and the printer did not stop and completed",
"the power supply with a new one, and the printer did not stop",
"it works fine. In addition to stopping during prints, it has also frozen",
"up, the print will stop, and the heating elements will turn off. Pressing",
"fine. In addition to stopping during prints, it has also frozen up while",
"before I buy a new one and replace it? Update: I replaced the",
"randomly stopping during prints. The LCD screen will lock up, the print will",
"a new one and replace it? Update: I replaced the power supply with",
"In addition to stopping during prints, it has also frozen up while just",
"heating elements will turn off. Pressing the reset button on the RAMPS restarts",
"thought is the power supply (12V 30A) is going bad, but is there",
"new one and replace it? Update: I replaced the power supply with a",
"one and replace it? Update: I replaced the power supply with a new",
"button on the RAMPS restarts the system and it works fine. In addition",
"with Mendel firmware and a RAMPS board. Recently it has been randomly stopping",
"off. Pressing the reset button on the RAMPS restarts the system and it",
"not stop and completed a print. I am voting to close the question.",
"the reset button on the RAMPS restarts the system and it works fine.",
"will stop, and the heating elements will turn off. Pressing the reset button",
"turn off. Pressing the reset button on the RAMPS restarts the system and",
"the system and it works fine. In addition to stopping during prints, it",
"but is there anything else I should check before I buy a new",
"print will stop, and the heating elements will turn off. Pressing the reset",
"30A) is going bad, but is there anything else I should check before",
"is going bad, but is there anything else I should check before I",
"new one, and the printer did not stop and completed a print. I",
"will turn off. Pressing the reset button on the RAMPS restarts the system",
"RAMPS board. Recently it has been randomly stopping during prints. The LCD screen",
"RAMPS restarts the system and it works fine. In addition to stopping during",
"during prints, it has also frozen up while just sitting while on. My",
"has also frozen up while just sitting while on. My first thought is",
"while just sitting while on. My first thought is the power supply (12V",
"and the printer did not stop and completed a print. I am voting",
"I buy a new one and replace it? Update: I replaced the power",
"there anything else I should check before I buy a new one and",
"a prusa i3 with Mendel firmware and a RAMPS board. Recently it has",
"one, and the printer did not stop and completed a print. I am",
"replaced the power supply with a new one, and the printer did not",
"firmware and a RAMPS board. Recently it has been randomly stopping during prints.",
"Pressing the reset button on the RAMPS restarts the system and it works",
"first thought is the power supply (12V 30A) is going bad, but is",
"(12V 30A) is going bad, but is there anything else I should check",
"sitting while on. My first thought is the power supply (12V 30A) is",
"up while just sitting while on. My first thought is the power supply",
"the printer did not stop and completed a print. I am voting to",
"buy a new one and replace it? Update: I replaced the power supply",
"it? Update: I replaced the power supply with a new one, and the",
"should check before I buy a new one and replace it? Update: I",
"check before I buy a new one and replace it? Update: I replaced",
"the power supply (12V 30A) is going bad, but is there anything else",
"Mendel firmware and a RAMPS board. Recently it has been randomly stopping during",
"to stopping during prints, it has also frozen up while just sitting while",
"The LCD screen will lock up, the print will stop, and the heating",
"anything else I should check before I buy a new one and replace"
] |
[
"the pixel-wise mapping has not been done uniformly. (View <http://s24.postimg.org/p7w09zvkl/snippet.png> for the image).",
"have been using Solidworks and AutoCAD to create STL file of a 3D",
"be represented by exactly the same set of pixels in the bmp image,",
"bmp image, so that all of the circular contours are identical. (I do",
"I want each and every circle to be represented by exactly the same",
"replicas. Looks like the pixel-wise mapping has not been done uniformly. (View <http://s24.postimg.org/p7w09zvkl/snippet.png>",
"channels, all of one radius. I expected the bmp slice to contain the",
"want each and every circle to be represented by exactly the same set",
"model I want to print. I slice the STL file using Freesteel Z",
"slicer (<http://www.freesteel.co.uk/wpblog/slicer/>) and save the slices in a bmp format. My 3d print",
"expected the bmp slice to contain the circular shapes looking exactly identical to",
"I have been using Solidworks and AutoCAD to create STL file of a",
"3D model I want to print. I slice the STL file using Freesteel",
"one radius. I expected the bmp slice to contain the circular shapes looking",
"(View <http://s24.postimg.org/p7w09zvkl/snippet.png> for the image). I want each and every circle to be",
"the image). I want each and every circle to be represented by exactly",
"bmp format. My 3d print has an array of circular channels, all of",
"the pixel resolution.) How can I overcome this problem? Are there any better",
"and AutoCAD to create STL file of a 3D model I want to",
"represented by exactly the same set of pixels in the bmp image, so",
"prefer changing the pixel resolution.) How can I overcome this problem? Are there",
"STL file using Freesteel Z level slicer (<http://www.freesteel.co.uk/wpblog/slicer/>) and save the slices in",
"However, I don't obtain the exact same replicas. Looks like the pixel-wise mapping",
"STL file of a 3D model I want to print. I slice the",
"of circular channels, all of one radius. I expected the bmp slice to",
"overcome this problem? Are there any better tools which would lead to a",
"has not been done uniformly. (View <http://s24.postimg.org/p7w09zvkl/snippet.png> for the image). I want each",
"(I do not prefer changing the pixel resolution.) How can I overcome this",
"problem? Are there any better tools which would lead to a perfectly uniform",
"print. I slice the STL file using Freesteel Z level slicer (<http://www.freesteel.co.uk/wpblog/slicer/>) and",
"I want to print. I slice the STL file using Freesteel Z level",
"My 3d print has an array of circular channels, all of one radius.",
"How can I overcome this problem? Are there any better tools which would",
"image, so that all of the circular contours are identical. (I do not",
"the circular shapes looking exactly identical to each other. However, I don't obtain",
"3d print has an array of circular channels, all of one radius. I",
"the exact same replicas. Looks like the pixel-wise mapping has not been done",
"level slicer (<http://www.freesteel.co.uk/wpblog/slicer/>) and save the slices in a bmp format. My 3d",
"can I overcome this problem? Are there any better tools which would lead",
"format. My 3d print has an array of circular channels, all of one",
"set of pixels in the bmp image, so that all of the circular",
"I expected the bmp slice to contain the circular shapes looking exactly identical",
"file of a 3D model I want to print. I slice the STL",
"the bmp slice to contain the circular shapes looking exactly identical to each",
"the same set of pixels in the bmp image, so that all of",
"been done uniformly. (View <http://s24.postimg.org/p7w09zvkl/snippet.png> for the image). I want each and every",
"an array of circular channels, all of one radius. I expected the bmp",
"image). I want each and every circle to be represented by exactly the",
"Freesteel Z level slicer (<http://www.freesteel.co.uk/wpblog/slicer/>) and save the slices in a bmp format.",
"of a 3D model I want to print. I slice the STL file",
"Are there any better tools which would lead to a perfectly uniform pixel-wise",
"using Solidworks and AutoCAD to create STL file of a 3D model I",
"exact same replicas. Looks like the pixel-wise mapping has not been done uniformly.",
"looking exactly identical to each other. However, I don't obtain the exact same",
"exactly identical to each other. However, I don't obtain the exact same replicas.",
"to each other. However, I don't obtain the exact same replicas. Looks like",
"each other. However, I don't obtain the exact same replicas. Looks like the",
"save the slices in a bmp format. My 3d print has an array",
"shapes looking exactly identical to each other. However, I don't obtain the exact",
"that all of the circular contours are identical. (I do not prefer changing",
"circular channels, all of one radius. I expected the bmp slice to contain",
"mapping has not been done uniformly. (View <http://s24.postimg.org/p7w09zvkl/snippet.png> for the image). I want",
"do not prefer changing the pixel resolution.) How can I overcome this problem?",
"all of the circular contours are identical. (I do not prefer changing the",
"in a bmp format. My 3d print has an array of circular channels,",
"using Freesteel Z level slicer (<http://www.freesteel.co.uk/wpblog/slicer/>) and save the slices in a bmp",
"been using Solidworks and AutoCAD to create STL file of a 3D model",
"the slices in a bmp format. My 3d print has an array of",
"circular shapes looking exactly identical to each other. However, I don't obtain the",
"for the image). I want each and every circle to be represented by",
"circle to be represented by exactly the same set of pixels in the",
"pixels in the bmp image, so that all of the circular contours are",
"contain the circular shapes looking exactly identical to each other. However, I don't",
"I don't obtain the exact same replicas. Looks like the pixel-wise mapping has",
"and every circle to be represented by exactly the same set of pixels",
"exactly the same set of pixels in the bmp image, so that all",
"this problem? Are there any better tools which would lead to a perfectly",
"by exactly the same set of pixels in the bmp image, so that",
"the STL file using Freesteel Z level slicer (<http://www.freesteel.co.uk/wpblog/slicer/>) and save the slices",
"slices in a bmp format. My 3d print has an array of circular",
"contours are identical. (I do not prefer changing the pixel resolution.) How can",
"Z level slicer (<http://www.freesteel.co.uk/wpblog/slicer/>) and save the slices in a bmp format. My",
"of pixels in the bmp image, so that all of the circular contours",
"want to print. I slice the STL file using Freesteel Z level slicer",
"same replicas. Looks like the pixel-wise mapping has not been done uniformly. (View",
"circular contours are identical. (I do not prefer changing the pixel resolution.) How",
"pixel-wise mapping has not been done uniformly. (View <http://s24.postimg.org/p7w09zvkl/snippet.png> for the image). I",
"the bmp image, so that all of the circular contours are identical. (I",
"not prefer changing the pixel resolution.) How can I overcome this problem? Are",
"radius. I expected the bmp slice to contain the circular shapes looking exactly",
"slice to contain the circular shapes looking exactly identical to each other. However,",
"pixel resolution.) How can I overcome this problem? Are there any better tools",
"in the bmp image, so that all of the circular contours are identical.",
"to be represented by exactly the same set of pixels in the bmp",
"obtain the exact same replicas. Looks like the pixel-wise mapping has not been",
"every circle to be represented by exactly the same set of pixels in",
"any better tools which would lead to a perfectly uniform pixel-wise mapping? Thanks!",
"array of circular channels, all of one radius. I expected the bmp slice",
"each and every circle to be represented by exactly the same set of",
"done uniformly. (View <http://s24.postimg.org/p7w09zvkl/snippet.png> for the image). I want each and every circle",
"create STL file of a 3D model I want to print. I slice",
"I overcome this problem? Are there any better tools which would lead to",
"uniformly. (View <http://s24.postimg.org/p7w09zvkl/snippet.png> for the image). I want each and every circle to",
"changing the pixel resolution.) How can I overcome this problem? Are there any",
"identical to each other. However, I don't obtain the exact same replicas. Looks",
"AutoCAD to create STL file of a 3D model I want to print.",
"(<http://www.freesteel.co.uk/wpblog/slicer/>) and save the slices in a bmp format. My 3d print has",
"a bmp format. My 3d print has an array of circular channels, all",
"of one radius. I expected the bmp slice to contain the circular shapes",
"Looks like the pixel-wise mapping has not been done uniformly. (View <http://s24.postimg.org/p7w09zvkl/snippet.png> for",
"so that all of the circular contours are identical. (I do not prefer",
"print has an array of circular channels, all of one radius. I expected",
"all of one radius. I expected the bmp slice to contain the circular",
"Solidworks and AutoCAD to create STL file of a 3D model I want",
"identical. (I do not prefer changing the pixel resolution.) How can I overcome",
"the circular contours are identical. (I do not prefer changing the pixel resolution.)",
"same set of pixels in the bmp image, so that all of the",
"other. However, I don't obtain the exact same replicas. Looks like the pixel-wise",
"not been done uniformly. (View <http://s24.postimg.org/p7w09zvkl/snippet.png> for the image). I want each and",
"don't obtain the exact same replicas. Looks like the pixel-wise mapping has not",
"<http://s24.postimg.org/p7w09zvkl/snippet.png> for the image). I want each and every circle to be represented",
"slice the STL file using Freesteel Z level slicer (<http://www.freesteel.co.uk/wpblog/slicer/>) and save the",
"bmp slice to contain the circular shapes looking exactly identical to each other.",
"there any better tools which would lead to a perfectly uniform pixel-wise mapping?",
"of the circular contours are identical. (I do not prefer changing the pixel",
"resolution.) How can I overcome this problem? Are there any better tools which",
"and save the slices in a bmp format. My 3d print has an",
"to print. I slice the STL file using Freesteel Z level slicer (<http://www.freesteel.co.uk/wpblog/slicer/>)",
"better tools which would lead to a perfectly uniform pixel-wise mapping? Thanks! PJ",
"are identical. (I do not prefer changing the pixel resolution.) How can I",
"to contain the circular shapes looking exactly identical to each other. However, I",
"like the pixel-wise mapping has not been done uniformly. (View <http://s24.postimg.org/p7w09zvkl/snippet.png> for the",
"I slice the STL file using Freesteel Z level slicer (<http://www.freesteel.co.uk/wpblog/slicer/>) and save",
"a 3D model I want to print. I slice the STL file using",
"has an array of circular channels, all of one radius. I expected the",
"file using Freesteel Z level slicer (<http://www.freesteel.co.uk/wpblog/slicer/>) and save the slices in a",
"to create STL file of a 3D model I want to print. I"
] |
[
"outcome of the rendering. But in my case this makes some parts unable",
"somebody knows how to do this I've been searching and asking around for",
"all STL files which I've learned so far are hard to edit and",
"on Thingiverse but they are all STL files which I've learned so far",
"for one to another program. Today I gave it another try to find",
"still be able to for example screw the bottom of with a thread",
"can make a low poly shape (example below) where I still can add",
"and threading like you can do with AutoCAD, Vectorworks. I hope somebody knows",
"where I still can add holes and threading like you can do with",
"example the threading? So for the question I their a program which I",
"and asking around for weeks!! This is an example of the type of",
"same but it would be to give you an idea Example of the",
"in all the tutorials how to make something low poly but still be",
"I would like to implement in the shape above, [Tap and Die for",
"cross transferring them for one to another program. Today I gave it another",
"able to for example screw the bottom of with a thread for example.",
"around for weeks!! This is an example of the type of shape I",
"perfectly and then by using a mesh program like 123make and Meshmixer to",
"it another try to find other programs which can give me the result",
"it would be to give you an idea Example of the thread I",
"in my case this makes some parts unable to use anymore as example",
"is an example of the type of shape I would like to create,",
"give me the result and functionality I want. Thus far I've only found",
"bit of Vectorworks - a 3D/Architecture drawing program. I found nothing in all",
"make the shape perfectly and then by using a mesh program like 123make",
"the rendering. But in my case this makes some parts unable to use",
"add holes and threading like you can do with AutoCAD, Vectorworks. I hope",
"Example of the thread I would like to implement in the shape above,",
"found nothing in all the tutorials how to make something low poly but",
"of the type of shape I would like to create, [Low poly vase](https://www.google.be/search?q=low%20poly%20vase&espv=2&biw=1567&bih=976&tbm=isch&imgil=s0wM9Yoq8UTF1M%253A%253BNVFfgWtuiEyI8M%253Bhttps%25253A%25252F%25252Fwww.etsy.com%25252Flisting%25252F221563489%25252Fartsy-vases-redux-golden-polygon-modern&source=iu&pf=m&fir=s0wM9Yoq8UTF1M%253A%252CNVFfgWtuiEyI8M%252C_&usg=__9w_ZHPGpome2_nNv4VJ7ZRwwRUw%3D&ved=0ahUKEwiPqO-qpYzMAhUIow4KHY7BDmoQyjcIJg&ei=VJYOV4-uIojGOo6Du9AG#imgrc=s0wM9Yoq8UTF1M%3A)",
"to implement in the shape above, [Tap and Die for 3D printed threads](http://www.thingiverse.com/thing:227192)",
"knows how to do this I've been searching and asking around for weeks!!",
"idea of a project where I want an abstract shape (I'm going to",
"I'm losing my mind, it all started out with the idea of a",
"with the idea of a project where I want an abstract shape (I'm",
"parts unable to use anymore as example the threading? So for the question",
"shape perfectly and then by using a mesh program like 123make and Meshmixer",
"hard to edit and make them functionally usable when cross transferring them for",
"shapes I like on Thingiverse but they are all STL files which I've",
"functionality I want. Thus far I've only found program where you make the",
"a mesh program like 123make and Meshmixer to then change the outcome of",
"me the result and functionality I want. Thus far I've only found program",
"anymore as example the threading? So for the question I their a program",
"and Meshmixer to then change the outcome of the rendering. But in my",
"where you make the shape perfectly and then by using a mesh program",
"of Vectorworks - a 3D/Architecture drawing program. I found nothing in all the",
"like 123make and Meshmixer to then change the outcome of the rendering. But",
"a stretched cube with an angle), now I know a bit of Vectorworks",
"makes some parts unable to use anymore as example the threading? So for",
"program like 123make and Meshmixer to then change the outcome of the rendering.",
"I would like to create, [Low poly vase](https://www.google.be/search?q=low%20poly%20vase&espv=2&biw=1567&bih=976&tbm=isch&imgil=s0wM9Yoq8UTF1M%253A%253BNVFfgWtuiEyI8M%253Bhttps%25253A%25252F%25252Fwww.etsy.com%25252Flisting%25252F221563489%25252Fartsy-vases-redux-golden-polygon-modern&source=iu&pf=m&fir=s0wM9Yoq8UTF1M%253A%252CNVFfgWtuiEyI8M%252C_&usg=__9w_ZHPGpome2_nNv4VJ7ZRwwRUw%3D&ved=0ahUKEwiPqO-qpYzMAhUIow4KHY7BDmoQyjcIJg&ei=VJYOV4-uIojGOo6Du9AG#imgrc=s0wM9Yoq8UTF1M%3A) - mine would be exactly",
"thread for example. I found numerous shapes I like on Thingiverse but they",
"but they are all STL files which I've learned so far are hard",
"Thingiverse but they are all STL files which I've learned so far are",
"would be to give you an idea Example of the thread I would",
"for the question I their a program which I can make a low",
"give you an idea Example of the thread I would like to implement",
"asking around for weeks!! This is an example of the type of shape",
"far are hard to edit and make them functionally usable when cross transferring",
"example of the type of shape I would like to create, [Low poly",
"then change the outcome of the rendering. But in my case this makes",
"unable to use anymore as example the threading? So for the question I",
"find other programs which can give me the result and functionality I want.",
"where I want an abstract shape (I'm going to call it a stretched",
"can do with AutoCAD, Vectorworks. I hope somebody knows how to do this",
"with AutoCAD, Vectorworks. I hope somebody knows how to do this I've been",
"are all STL files which I've learned so far are hard to edit",
"like to implement in the shape above, [Tap and Die for 3D printed",
"with an angle), now I know a bit of Vectorworks - a 3D/Architecture",
"a thread for example. I found numerous shapes I like on Thingiverse but",
"do this I've been searching and asking around for weeks!! This is an",
"program. I found nothing in all the tutorials how to make something low",
"when cross transferring them for one to another program. Today I gave it",
"idea Example of the thread I would like to implement in the shape",
"like you can do with AutoCAD, Vectorworks. I hope somebody knows how to",
"but it would be to give you an idea Example of the thread",
"them for one to another program. Today I gave it another try to",
"to call it a stretched cube with an angle), now I know a",
"be able to for example screw the bottom of with a thread for",
"they are all STL files which I've learned so far are hard to",
"the shape perfectly and then by using a mesh program like 123make and",
"example screw the bottom of with a thread for example. I found numerous",
"still can add holes and threading like you can do with AutoCAD, Vectorworks.",
"know a bit of Vectorworks - a 3D/Architecture drawing program. I found nothing",
"gave it another try to find other programs which can give me the",
"- mine would be exactly the same but it would be to give",
"another program. Today I gave it another try to find other programs which",
"transferring them for one to another program. Today I gave it another try",
"to make something low poly but still be able to for example screw",
"edit and make them functionally usable when cross transferring them for one to",
"mine would be exactly the same but it would be to give you",
"question I their a program which I can make a low poly shape",
"started out with the idea of a project where I want an abstract",
"123make and Meshmixer to then change the outcome of the rendering. But in",
"exactly the same but it would be to give you an idea Example",
"you an idea Example of the thread I would like to implement in",
"Vectorworks. I hope somebody knows how to do this I've been searching and",
"would be exactly the same but it would be to give you an",
"out with the idea of a project where I want an abstract shape",
"Vectorworks - a 3D/Architecture drawing program. I found nothing in all the tutorials",
"all started out with the idea of a project where I want an",
"poly but still be able to for example screw the bottom of with",
"use anymore as example the threading? So for the question I their a",
"low poly shape (example below) where I still can add holes and threading",
"screw the bottom of with a thread for example. I found numerous shapes",
"my case this makes some parts unable to use anymore as example the",
"the tutorials how to make something low poly but still be able to",
"want an abstract shape (I'm going to call it a stretched cube with",
"but still be able to for example screw the bottom of with a",
"rendering. But in my case this makes some parts unable to use anymore",
"to then change the outcome of the rendering. But in my case this",
"shape (I'm going to call it a stretched cube with an angle), now",
"usable when cross transferring them for one to another program. Today I gave",
"been searching and asking around for weeks!! This is an example of the",
"bottom of with a thread for example. I found numerous shapes I like",
"I like on Thingiverse but they are all STL files which I've learned",
"as example the threading? So for the question I their a program which",
"the type of shape I would like to create, [Low poly vase](https://www.google.be/search?q=low%20poly%20vase&espv=2&biw=1567&bih=976&tbm=isch&imgil=s0wM9Yoq8UTF1M%253A%253BNVFfgWtuiEyI8M%253Bhttps%25253A%25252F%25252Fwww.etsy.com%25252Flisting%25252F221563489%25252Fartsy-vases-redux-golden-polygon-modern&source=iu&pf=m&fir=s0wM9Yoq8UTF1M%253A%252CNVFfgWtuiEyI8M%252C_&usg=__9w_ZHPGpome2_nNv4VJ7ZRwwRUw%3D&ved=0ahUKEwiPqO-qpYzMAhUIow4KHY7BDmoQyjcIJg&ei=VJYOV4-uIojGOo6Du9AG#imgrc=s0wM9Yoq8UTF1M%3A) -",
"found program where you make the shape perfectly and then by using a",
"a bit of Vectorworks - a 3D/Architecture drawing program. I found nothing in",
"I their a program which I can make a low poly shape (example",
"functionally usable when cross transferring them for one to another program. Today I",
"of shape I would like to create, [Low poly vase](https://www.google.be/search?q=low%20poly%20vase&espv=2&biw=1567&bih=976&tbm=isch&imgil=s0wM9Yoq8UTF1M%253A%253BNVFfgWtuiEyI8M%253Bhttps%25253A%25252F%25252Fwww.etsy.com%25252Flisting%25252F221563489%25252Fartsy-vases-redux-golden-polygon-modern&source=iu&pf=m&fir=s0wM9Yoq8UTF1M%253A%252CNVFfgWtuiEyI8M%252C_&usg=__9w_ZHPGpome2_nNv4VJ7ZRwwRUw%3D&ved=0ahUKEwiPqO-qpYzMAhUIow4KHY7BDmoQyjcIJg&ei=VJYOV4-uIojGOo6Du9AG#imgrc=s0wM9Yoq8UTF1M%3A) - mine would",
"call it a stretched cube with an angle), now I know a bit",
"example. I found numerous shapes I like on Thingiverse but they are all",
"found numerous shapes I like on Thingiverse but they are all STL files",
"the same but it would be to give you an idea Example of",
"far I've only found program where you make the shape perfectly and then",
"case this makes some parts unable to use anymore as example the threading?",
"going to call it a stretched cube with an angle), now I know",
"which I've learned so far are hard to edit and make them functionally",
"Today I gave it another try to find other programs which can give",
"change the outcome of the rendering. But in my case this makes some",
"I can make a low poly shape (example below) where I still can",
"an angle), now I know a bit of Vectorworks - a 3D/Architecture drawing",
"to another program. Today I gave it another try to find other programs",
"the bottom of with a thread for example. I found numerous shapes I",
"a 3D/Architecture drawing program. I found nothing in all the tutorials how to",
"of a project where I want an abstract shape (I'm going to call",
"3D/Architecture drawing program. I found nothing in all the tutorials how to make",
"losing my mind, it all started out with the idea of a project",
"using a mesh program like 123make and Meshmixer to then change the outcome",
"programs which can give me the result and functionality I want. Thus far",
"be exactly the same but it would be to give you an idea",
"(I'm going to call it a stretched cube with an angle), now I",
"vase](https://www.google.be/search?q=low%20poly%20vase&espv=2&biw=1567&bih=976&tbm=isch&imgil=s0wM9Yoq8UTF1M%253A%253BNVFfgWtuiEyI8M%253Bhttps%25253A%25252F%25252Fwww.etsy.com%25252Flisting%25252F221563489%25252Fartsy-vases-redux-golden-polygon-modern&source=iu&pf=m&fir=s0wM9Yoq8UTF1M%253A%252CNVFfgWtuiEyI8M%252C_&usg=__9w_ZHPGpome2_nNv4VJ7ZRwwRUw%3D&ved=0ahUKEwiPqO-qpYzMAhUIow4KHY7BDmoQyjcIJg&ei=VJYOV4-uIojGOo6Du9AG#imgrc=s0wM9Yoq8UTF1M%3A) - mine would be exactly the same but it would be to",
"But in my case this makes some parts unable to use anymore as",
"thread I would like to implement in the shape above, [Tap and Die",
"a project where I want an abstract shape (I'm going to call it",
"and functionality I want. Thus far I've only found program where you make",
"files which I've learned so far are hard to edit and make them",
"I want an abstract shape (I'm going to call it a stretched cube",
"be to give you an idea Example of the thread I would like",
"learned so far are hard to edit and make them functionally usable when",
"So for the question I their a program which I can make a",
"a low poly shape (example below) where I still can add holes and",
"to do this I've been searching and asking around for weeks!! This is",
"I found numerous shapes I like on Thingiverse but they are all STL",
"to find other programs which can give me the result and functionality I",
"my mind, it all started out with the idea of a project where",
"with a thread for example. I found numerous shapes I like on Thingiverse",
"I want. Thus far I've only found program where you make the shape",
"only found program where you make the shape perfectly and then by using",
"stretched cube with an angle), now I know a bit of Vectorworks -",
"their a program which I can make a low poly shape (example below)",
"a program which I can make a low poly shape (example below) where",
"mind, it all started out with the idea of a project where I",
"other programs which can give me the result and functionality I want. Thus",
"I still can add holes and threading like you can do with AutoCAD,",
"for weeks!! This is an example of the type of shape I would",
"to for example screw the bottom of with a thread for example. I",
"[Low poly vase](https://www.google.be/search?q=low%20poly%20vase&espv=2&biw=1567&bih=976&tbm=isch&imgil=s0wM9Yoq8UTF1M%253A%253BNVFfgWtuiEyI8M%253Bhttps%25253A%25252F%25252Fwww.etsy.com%25252Flisting%25252F221563489%25252Fartsy-vases-redux-golden-polygon-modern&source=iu&pf=m&fir=s0wM9Yoq8UTF1M%253A%252CNVFfgWtuiEyI8M%252C_&usg=__9w_ZHPGpome2_nNv4VJ7ZRwwRUw%3D&ved=0ahUKEwiPqO-qpYzMAhUIow4KHY7BDmoQyjcIJg&ei=VJYOV4-uIojGOo6Du9AG#imgrc=s0wM9Yoq8UTF1M%3A) - mine would be exactly the same but it would",
"program which I can make a low poly shape (example below) where I",
"the question I their a program which I can make a low poly",
"can add holes and threading like you can do with AutoCAD, Vectorworks. I",
"make a low poly shape (example below) where I still can add holes",
"program. Today I gave it another try to find other programs which can",
"make them functionally usable when cross transferring them for one to another program.",
"and then by using a mesh program like 123make and Meshmixer to then",
"for example screw the bottom of with a thread for example. I found",
"holes and threading like you can do with AutoCAD, Vectorworks. I hope somebody",
"angle), now I know a bit of Vectorworks - a 3D/Architecture drawing program.",
"I know a bit of Vectorworks - a 3D/Architecture drawing program. I found",
"I've only found program where you make the shape perfectly and then by",
"them functionally usable when cross transferring them for one to another program. Today",
"shape (example below) where I still can add holes and threading like you",
"it all started out with the idea of a project where I want",
"poly vase](https://www.google.be/search?q=low%20poly%20vase&espv=2&biw=1567&bih=976&tbm=isch&imgil=s0wM9Yoq8UTF1M%253A%253BNVFfgWtuiEyI8M%253Bhttps%25253A%25252F%25252Fwww.etsy.com%25252Flisting%25252F221563489%25252Fartsy-vases-redux-golden-polygon-modern&source=iu&pf=m&fir=s0wM9Yoq8UTF1M%253A%252CNVFfgWtuiEyI8M%252C_&usg=__9w_ZHPGpome2_nNv4VJ7ZRwwRUw%3D&ved=0ahUKEwiPqO-qpYzMAhUIow4KHY7BDmoQyjcIJg&ei=VJYOV4-uIojGOo6Du9AG#imgrc=s0wM9Yoq8UTF1M%3A) - mine would be exactly the same but it would be",
"I've learned so far are hard to edit and make them functionally usable",
"STL files which I've learned so far are hard to edit and make",
"want. Thus far I've only found program where you make the shape perfectly",
"poly shape (example below) where I still can add holes and threading like",
"make something low poly but still be able to for example screw the",
"of with a thread for example. I found numerous shapes I like on",
"this makes some parts unable to use anymore as example the threading? So",
"so far are hard to edit and make them functionally usable when cross",
"do with AutoCAD, Vectorworks. I hope somebody knows how to do this I've",
"try to find other programs which can give me the result and functionality",
"(example below) where I still can add holes and threading like you can",
"how to make something low poly but still be able to for example",
"and make them functionally usable when cross transferring them for one to another",
"mesh program like 123make and Meshmixer to then change the outcome of the",
"I gave it another try to find other programs which can give me",
"Thus far I've only found program where you make the shape perfectly and",
"the outcome of the rendering. But in my case this makes some parts",
"result and functionality I want. Thus far I've only found program where you",
"of the rendering. But in my case this makes some parts unable to",
"abstract shape (I'm going to call it a stretched cube with an angle),",
"threading like you can do with AutoCAD, Vectorworks. I hope somebody knows how",
"an idea Example of the thread I would like to implement in the",
"something low poly but still be able to for example screw the bottom",
"below) where I still can add holes and threading like you can do",
"you can do with AutoCAD, Vectorworks. I hope somebody knows how to do",
"which can give me the result and functionality I want. Thus far I've",
"searching and asking around for weeks!! This is an example of the type",
"by using a mesh program like 123make and Meshmixer to then change the",
"shape I would like to create, [Low poly vase](https://www.google.be/search?q=low%20poly%20vase&espv=2&biw=1567&bih=976&tbm=isch&imgil=s0wM9Yoq8UTF1M%253A%253BNVFfgWtuiEyI8M%253Bhttps%25253A%25252F%25252Fwww.etsy.com%25252Flisting%25252F221563489%25252Fartsy-vases-redux-golden-polygon-modern&source=iu&pf=m&fir=s0wM9Yoq8UTF1M%253A%252CNVFfgWtuiEyI8M%252C_&usg=__9w_ZHPGpome2_nNv4VJ7ZRwwRUw%3D&ved=0ahUKEwiPqO-qpYzMAhUIow4KHY7BDmoQyjcIJg&ei=VJYOV4-uIojGOo6Du9AG#imgrc=s0wM9Yoq8UTF1M%3A) - mine would be",
"project where I want an abstract shape (I'm going to call it a",
"threading? So for the question I their a program which I can make",
"numerous shapes I like on Thingiverse but they are all STL files which",
"type of shape I would like to create, [Low poly vase](https://www.google.be/search?q=low%20poly%20vase&espv=2&biw=1567&bih=976&tbm=isch&imgil=s0wM9Yoq8UTF1M%253A%253BNVFfgWtuiEyI8M%253Bhttps%25253A%25252F%25252Fwww.etsy.com%25252Flisting%25252F221563489%25252Fartsy-vases-redux-golden-polygon-modern&source=iu&pf=m&fir=s0wM9Yoq8UTF1M%253A%252CNVFfgWtuiEyI8M%252C_&usg=__9w_ZHPGpome2_nNv4VJ7ZRwwRUw%3D&ved=0ahUKEwiPqO-qpYzMAhUIow4KHY7BDmoQyjcIJg&ei=VJYOV4-uIojGOo6Du9AG#imgrc=s0wM9Yoq8UTF1M%3A) - mine",
"another try to find other programs which can give me the result and",
"are hard to edit and make them functionally usable when cross transferring them",
"to create, [Low poly vase](https://www.google.be/search?q=low%20poly%20vase&espv=2&biw=1567&bih=976&tbm=isch&imgil=s0wM9Yoq8UTF1M%253A%253BNVFfgWtuiEyI8M%253Bhttps%25253A%25252F%25252Fwww.etsy.com%25252Flisting%25252F221563489%25252Fartsy-vases-redux-golden-polygon-modern&source=iu&pf=m&fir=s0wM9Yoq8UTF1M%253A%252CNVFfgWtuiEyI8M%252C_&usg=__9w_ZHPGpome2_nNv4VJ7ZRwwRUw%3D&ved=0ahUKEwiPqO-qpYzMAhUIow4KHY7BDmoQyjcIJg&ei=VJYOV4-uIojGOo6Du9AG#imgrc=s0wM9Yoq8UTF1M%3A) - mine would be exactly the same but",
"program where you make the shape perfectly and then by using a mesh",
"to give you an idea Example of the thread I would like to",
"I found nothing in all the tutorials how to make something low poly",
"to use anymore as example the threading? So for the question I their",
"drawing program. I found nothing in all the tutorials how to make something",
"This is an example of the type of shape I would like to",
"nothing in all the tutorials how to make something low poly but still",
"cube with an angle), now I know a bit of Vectorworks - a",
"- a 3D/Architecture drawing program. I found nothing in all the tutorials how",
"can give me the result and functionality I want. Thus far I've only",
"the threading? So for the question I their a program which I can",
"the thread I would like to implement in the shape above, [Tap and",
"Meshmixer to then change the outcome of the rendering. But in my case",
"AutoCAD, Vectorworks. I hope somebody knows how to do this I've been searching",
"like to create, [Low poly vase](https://www.google.be/search?q=low%20poly%20vase&espv=2&biw=1567&bih=976&tbm=isch&imgil=s0wM9Yoq8UTF1M%253A%253BNVFfgWtuiEyI8M%253Bhttps%25253A%25252F%25252Fwww.etsy.com%25252Flisting%25252F221563489%25252Fartsy-vases-redux-golden-polygon-modern&source=iu&pf=m&fir=s0wM9Yoq8UTF1M%253A%252CNVFfgWtuiEyI8M%252C_&usg=__9w_ZHPGpome2_nNv4VJ7ZRwwRUw%3D&ved=0ahUKEwiPqO-qpYzMAhUIow4KHY7BDmoQyjcIJg&ei=VJYOV4-uIojGOo6Du9AG#imgrc=s0wM9Yoq8UTF1M%3A) - mine would be exactly the same",
"one to another program. Today I gave it another try to find other",
"for example. I found numerous shapes I like on Thingiverse but they are",
"you make the shape perfectly and then by using a mesh program like",
"how to do this I've been searching and asking around for weeks!! This",
"it a stretched cube with an angle), now I know a bit of",
"which I can make a low poly shape (example below) where I still",
"an example of the type of shape I would like to create, [Low",
"low poly but still be able to for example screw the bottom of",
"this I've been searching and asking around for weeks!! This is an example",
"hope somebody knows how to do this I've been searching and asking around",
"of the thread I would like to implement in the shape above, [Tap",
"the idea of a project where I want an abstract shape (I'm going",
"I've been searching and asking around for weeks!! This is an example of",
"would like to create, [Low poly vase](https://www.google.be/search?q=low%20poly%20vase&espv=2&biw=1567&bih=976&tbm=isch&imgil=s0wM9Yoq8UTF1M%253A%253BNVFfgWtuiEyI8M%253Bhttps%25253A%25252F%25252Fwww.etsy.com%25252Flisting%25252F221563489%25252Fartsy-vases-redux-golden-polygon-modern&source=iu&pf=m&fir=s0wM9Yoq8UTF1M%253A%252CNVFfgWtuiEyI8M%252C_&usg=__9w_ZHPGpome2_nNv4VJ7ZRwwRUw%3D&ved=0ahUKEwiPqO-qpYzMAhUIow4KHY7BDmoQyjcIJg&ei=VJYOV4-uIojGOo6Du9AG#imgrc=s0wM9Yoq8UTF1M%3A) - mine would be exactly the",
"create, [Low poly vase](https://www.google.be/search?q=low%20poly%20vase&espv=2&biw=1567&bih=976&tbm=isch&imgil=s0wM9Yoq8UTF1M%253A%253BNVFfgWtuiEyI8M%253Bhttps%25253A%25252F%25252Fwww.etsy.com%25252Flisting%25252F221563489%25252Fartsy-vases-redux-golden-polygon-modern&source=iu&pf=m&fir=s0wM9Yoq8UTF1M%253A%252CNVFfgWtuiEyI8M%252C_&usg=__9w_ZHPGpome2_nNv4VJ7ZRwwRUw%3D&ved=0ahUKEwiPqO-qpYzMAhUIow4KHY7BDmoQyjcIJg&ei=VJYOV4-uIojGOo6Du9AG#imgrc=s0wM9Yoq8UTF1M%3A) - mine would be exactly the same but it",
"then by using a mesh program like 123make and Meshmixer to then change",
"to edit and make them functionally usable when cross transferring them for one",
"tutorials how to make something low poly but still be able to for",
"weeks!! This is an example of the type of shape I would like",
"like on Thingiverse but they are all STL files which I've learned so",
"an abstract shape (I'm going to call it a stretched cube with an",
"the result and functionality I want. Thus far I've only found program where",
"some parts unable to use anymore as example the threading? So for the",
"would like to implement in the shape above, [Tap and Die for 3D",
"I hope somebody knows how to do this I've been searching and asking",
"now I know a bit of Vectorworks - a 3D/Architecture drawing program. I",
"all the tutorials how to make something low poly but still be able"
] |
[
"It worked fine in plastic, but when we tried it with bronze filament",
"is supposed to be a bead for a beaded necklace. It was exported",
"who operates the printer says that most, but not all, of the models",
"in bronze have a border around them when they print, and this one",
"y axes, and 3 on the z axis in Blender. It is supposed",
"it didn't start printing. Is there something I need to add to the",
"Blender. It is supposed to be a bead for a beaded necklace. It",
"but when we tried it with bronze filament the nozzle clogged and it",
"bronze have a border around them when they print, and this one didn't.",
"for the printer? The person who operates the printer says that most, but",
"fine in plastic, but when we tried it with bronze filament the nozzle",
"necklace. It was exported to Cura as an .stl, then printed on a",
"it with bronze filament the nozzle clogged and it didn't start printing. Is",
"3 on the z axis in Blender. It is supposed to be a",
"a torus that was 1 on the x and y axes, and 3",
"worked fine in plastic, but when we tried it with bronze filament the",
"model that will provide instructions for the printer? The person who operates the",
"the nozzle clogged and it didn't start printing. Is there something I need",
"the printer says that most, but not all, of the models he prints",
"that most, but not all, of the models he prints in bronze have",
"we tried it with bronze filament the nozzle clogged and it didn't start",
"Is there something I need to add to the model that will provide",
"instructions for the printer? The person who operates the printer says that most,",
"clogged and it didn't start printing. Is there something I need to add",
"of the models he prints in bronze have a border around them when",
"in plastic, but when we tried it with bronze filament the nozzle clogged",
"didn't start printing. Is there something I need to add to the model",
"a border around them when they print, and this one didn't. I don't",
"in Blender. It is supposed to be a bead for a beaded necklace.",
"bead for a beaded necklace. It was exported to Cura as an .stl,",
"an .stl, then printed on a Lulzbot Mini. It worked fine in plastic,",
"printing. Is there something I need to add to the model that will",
"to Cura as an .stl, then printed on a Lulzbot Mini. It worked",
"was 1 on the x and y axes, and 3 on the z",
"tried it with bronze filament the nozzle clogged and it didn't start printing.",
"print, and this one didn't. I don't know if that makes a difference.",
"the z axis in Blender. It is supposed to be a bead for",
"supposed to be a bead for a beaded necklace. It was exported to",
"beaded necklace. It was exported to Cura as an .stl, then printed on",
"they print, and this one didn't. I don't know if that makes a",
"Lulzbot Mini. It worked fine in plastic, but when we tried it with",
"there something I need to add to the model that will provide instructions",
"when we tried it with bronze filament the nozzle clogged and it didn't",
"the printer? The person who operates the printer says that most, but not",
"person who operates the printer says that most, but not all, of the",
"when they print, and this one didn't. I don't know if that makes",
"to be a bead for a beaded necklace. It was exported to Cura",
"on the x and y axes, and 3 on the z axis in",
"around them when they print, and this one didn't. I don't know if",
"start printing. Is there something I need to add to the model that",
"prints in bronze have a border around them when they print, and this",
"was exported to Cura as an .stl, then printed on a Lulzbot Mini.",
"z axis in Blender. It is supposed to be a bead for a",
"be a bead for a beaded necklace. It was exported to Cura as",
"bronze filament the nozzle clogged and it didn't start printing. Is there something",
"not all, of the models he prints in bronze have a border around",
"then printed on a Lulzbot Mini. It worked fine in plastic, but when",
"Mini. It worked fine in plastic, but when we tried it with bronze",
"he prints in bronze have a border around them when they print, and",
"printed on a Lulzbot Mini. It worked fine in plastic, but when we",
"will provide instructions for the printer? The person who operates the printer says",
"them when they print, and this one didn't. I don't know if that",
"operates the printer says that most, but not all, of the models he",
"that was 1 on the x and y axes, and 3 on the",
"models he prints in bronze have a border around them when they print,",
"with bronze filament the nozzle clogged and it didn't start printing. Is there",
"filament the nozzle clogged and it didn't start printing. Is there something I",
"torus that was 1 on the x and y axes, and 3 on",
"nozzle clogged and it didn't start printing. Is there something I need to",
"printer? The person who operates the printer says that most, but not all,",
"add to the model that will provide instructions for the printer? The person",
"I need to add to the model that will provide instructions for the",
"border around them when they print, and this one didn't. I don't know",
"have a border around them when they print, and this one didn't. I",
"to add to the model that will provide instructions for the printer? The",
"a bead for a beaded necklace. It was exported to Cura as an",
"something I need to add to the model that will provide instructions for",
"1 on the x and y axes, and 3 on the z axis",
"that will provide instructions for the printer? The person who operates the printer",
"on a Lulzbot Mini. It worked fine in plastic, but when we tried",
"printer says that most, but not all, of the models he prints in",
"all, of the models he prints in bronze have a border around them",
"axes, and 3 on the z axis in Blender. It is supposed to",
"It was exported to Cura as an .stl, then printed on a Lulzbot",
"says that most, but not all, of the models he prints in bronze",
"but not all, of the models he prints in bronze have a border",
"a Lulzbot Mini. It worked fine in plastic, but when we tried it",
"and y axes, and 3 on the z axis in Blender. It is",
"the x and y axes, and 3 on the z axis in Blender.",
"and 3 on the z axis in Blender. It is supposed to be",
"for a beaded necklace. It was exported to Cura as an .stl, then",
"the models he prints in bronze have a border around them when they",
"Cura as an .stl, then printed on a Lulzbot Mini. It worked fine",
"x and y axes, and 3 on the z axis in Blender. It",
"a beaded necklace. It was exported to Cura as an .stl, then printed",
"the model that will provide instructions for the printer? The person who operates",
"provide instructions for the printer? The person who operates the printer says that",
"plastic, but when we tried it with bronze filament the nozzle clogged and",
"made a torus that was 1 on the x and y axes, and",
"It is supposed to be a bead for a beaded necklace. It was",
"to the model that will provide instructions for the printer? The person who",
"The person who operates the printer says that most, but not all, of",
"most, but not all, of the models he prints in bronze have a",
"and it didn't start printing. Is there something I need to add to",
"I made a torus that was 1 on the x and y axes,",
"as an .stl, then printed on a Lulzbot Mini. It worked fine in",
".stl, then printed on a Lulzbot Mini. It worked fine in plastic, but",
"exported to Cura as an .stl, then printed on a Lulzbot Mini. It",
"need to add to the model that will provide instructions for the printer?",
"axis in Blender. It is supposed to be a bead for a beaded",
"on the z axis in Blender. It is supposed to be a bead"
] |
[
"that's marked `VR1`; what does that do, and does it work similar to",
"On my [Switching Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) there is a little orange trimpot that's marked",
"what does that do, and does it work similar to the ones on",
"a little orange trimpot that's marked `VR1`; what does that do, and does",
"orange trimpot that's marked `VR1`; what does that do, and does it work",
"is a little orange trimpot that's marked `VR1`; what does that do, and",
"that do, and does it work similar to the ones on the stepper",
"Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) there is a little orange trimpot that's marked `VR1`; what does",
"my [Switching Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) there is a little orange trimpot that's marked `VR1`;",
"`VR1`; what does that do, and does it work similar to the ones",
"there is a little orange trimpot that's marked `VR1`; what does that do,",
"does that do, and does it work similar to the ones on the",
"trimpot that's marked `VR1`; what does that do, and does it work similar",
"do, and does it work similar to the ones on the stepper drivers?",
"[Switching Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) there is a little orange trimpot that's marked `VR1`; what",
"marked `VR1`; what does that do, and does it work similar to the",
"little orange trimpot that's marked `VR1`; what does that do, and does it",
"Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) there is a little orange trimpot that's marked `VR1`; what does that"
] |
[
"for the Rev E was a 24 V/9.2 A which was necessary for",
"V/9.2 A which was necessary for the dual extruders and heated bed. I",
"supply. The power supply for the Rev E was a 24 V/9.2 A",
"heated bed. I know I need a 24 V power supply, but should",
"should I be concerned about the amperage? What will a higher (or lower)",
"supply for the Rev E was a 24 V/9.2 A which was necessary",
"just recently purchased a new MightyBoard (Rev G) for my Replicator that requires",
"new MightyBoard (Rev G) for my Replicator that requires a new power supply.",
"a 24 V power supply, but should I be concerned about the amperage?",
"a new power supply. The power supply for the Rev E was a",
"power supply for the Rev E was a 24 V/9.2 A which was",
"need a 24 V power supply, but should I be concerned about the",
"I know I need a 24 V power supply, but should I be",
"a new MightyBoard (Rev G) for my Replicator that requires a new power",
"(Rev G) for my Replicator that requires a new power supply. The power",
"The power supply for the Rev E was a 24 V/9.2 A which",
"24 V/9.2 A which was necessary for the dual extruders and heated bed.",
"was necessary for the dual extruders and heated bed. I know I need",
"bed. I know I need a 24 V power supply, but should I",
"the amperage? What will a higher (or lower) rating affect on my machine?",
"new power supply. The power supply for the Rev E was a 24",
"but should I be concerned about the amperage? What will a higher (or",
"extruders and heated bed. I know I need a 24 V power supply,",
"MightyBoard (Rev G) for my Replicator that requires a new power supply. The",
"supply, but should I be concerned about the amperage? What will a higher",
"24 V power supply, but should I be concerned about the amperage? What",
"necessary for the dual extruders and heated bed. I know I need a",
"E was a 24 V/9.2 A which was necessary for the dual extruders",
"about the amperage? What will a higher (or lower) rating affect on my",
"recently purchased a new MightyBoard (Rev G) for my Replicator that requires a",
"a 24 V/9.2 A which was necessary for the dual extruders and heated",
"was a 24 V/9.2 A which was necessary for the dual extruders and",
"which was necessary for the dual extruders and heated bed. I know I",
"my Replicator that requires a new power supply. The power supply for the",
"G) for my Replicator that requires a new power supply. The power supply",
"purchased a new MightyBoard (Rev G) for my Replicator that requires a new",
"power supply. The power supply for the Rev E was a 24 V/9.2",
"and heated bed. I know I need a 24 V power supply, but",
"A which was necessary for the dual extruders and heated bed. I know",
"be concerned about the amperage? What will a higher (or lower) rating affect",
"Rev E was a 24 V/9.2 A which was necessary for the dual",
"the Rev E was a 24 V/9.2 A which was necessary for the",
"requires a new power supply. The power supply for the Rev E was",
"know I need a 24 V power supply, but should I be concerned",
"for my Replicator that requires a new power supply. The power supply for",
"power supply, but should I be concerned about the amperage? What will a",
"concerned about the amperage? What will a higher (or lower) rating affect on",
"for the dual extruders and heated bed. I know I need a 24",
"I just recently purchased a new MightyBoard (Rev G) for my Replicator that",
"Replicator that requires a new power supply. The power supply for the Rev",
"V power supply, but should I be concerned about the amperage? What will",
"dual extruders and heated bed. I know I need a 24 V power",
"I need a 24 V power supply, but should I be concerned about",
"the dual extruders and heated bed. I know I need a 24 V",
"I be concerned about the amperage? What will a higher (or lower) rating",
"that requires a new power supply. The power supply for the Rev E"
] |
[
"3 mm - is there any way to shave off the excess and",
"is there any way to shave off the excess and use it as",
"mm filaments seem to actually be 3 mm - is there any way",
"be 3 mm - is there any way to shave off the excess",
"there any way to shave off the excess and use it as 2.85",
"actually be 3 mm - is there any way to shave off the",
"Some 3 mm filaments seem to actually be 3 mm - is there",
"filaments seem to actually be 3 mm - is there any way to",
"any way to shave off the excess and use it as 2.85 mm?",
"- is there any way to shave off the excess and use it",
"mm - is there any way to shave off the excess and use",
"seem to actually be 3 mm - is there any way to shave",
"3 mm filaments seem to actually be 3 mm - is there any",
"to actually be 3 mm - is there any way to shave off"
] |
[
"hot at the time. I had the heat bed unscrewed from the chassis",
"and, of course, the heat bed won't heat. Can this be salvaged or",
"sure how it shorted but I think it shorted between the power lead",
"the heat bed was not hot at the time. I had the heat",
"I had the heat bed unscrewed from the chassis but had forgotten to",
"into contact with the pcb. I smelled smoke and quickly unplugged the printer.",
"forgotten to unplug the printer. I am not exactly sure how it shorted",
"unplug the printer. I am not exactly sure how it shorted but I",
"the heat bed won't heat. Can this be salvaged or should I toss",
"won't heat. Can this be salvaged or should I toss it and buy",
"is the result and, of course, the heat bed won't heat. Can this",
"chassis but had forgotten to unplug the printer. I am not exactly sure",
"and buy a new one? [](https://i.stack.imgur.com/WhRPu.jpg) **update** the heat bed was not hot",
"but I think it shorted between the power lead connection and the thermistor.",
"the heat bed unscrewed from the chassis but had forgotten to unplug the",
"bed won't heat. Can this be salvaged or should I toss it and",
"was not hot at the time. I had the heat bed unscrewed from",
"had forgotten to unplug the printer. I am not exactly sure how it",
"the printer. I am not exactly sure how it shorted but I think",
"a new one? [](https://i.stack.imgur.com/WhRPu.jpg) **update** the heat bed was not hot at the",
"new one? [](https://i.stack.imgur.com/WhRPu.jpg) **update** the heat bed was not hot at the time.",
"and quickly unplugged the printer. Anyway, this is the result and, of course,",
"had the heat bed unscrewed from the chassis but had forgotten to unplug",
"to unplug the printer. I am not exactly sure how it shorted but",
"bed unscrewed from the chassis but had forgotten to unplug the printer. I",
"exactly sure how it shorted but I think it shorted between the power",
"**update** the heat bed was not hot at the time. I had the",
"this is the result and, of course, the heat bed won't heat. Can",
"not exactly sure how it shorted but I think it shorted between the",
"the pcb. I smelled smoke and quickly unplugged the printer. Anyway, this is",
"working on my printer when something metallic came into contact with the pcb.",
"I toss it and buy a new one? [](https://i.stack.imgur.com/WhRPu.jpg) **update** the heat bed",
"came into contact with the pcb. I smelled smoke and quickly unplugged the",
"from the chassis but had forgotten to unplug the printer. I am not",
"was working on my printer when something metallic came into contact with the",
"heat. Can this be salvaged or should I toss it and buy a",
"on my printer when something metallic came into contact with the pcb. I",
"the time. I had the heat bed unscrewed from the chassis but had",
"unscrewed from the chassis but had forgotten to unplug the printer. I am",
"not hot at the time. I had the heat bed unscrewed from the",
"shorted but I think it shorted between the power lead connection and the",
"how it shorted but I think it shorted between the power lead connection",
"buy a new one? [](https://i.stack.imgur.com/WhRPu.jpg) **update** the heat bed was not hot at",
"time. I had the heat bed unscrewed from the chassis but had forgotten",
"one? [](https://i.stack.imgur.com/WhRPu.jpg) **update** the heat bed was not hot at the time. I",
"I was working on my printer when something metallic came into contact with",
"with the pcb. I smelled smoke and quickly unplugged the printer. Anyway, this",
"printer. Anyway, this is the result and, of course, the heat bed won't",
"[](https://i.stack.imgur.com/WhRPu.jpg) **update** the heat bed was not hot at the time. I had",
"something metallic came into contact with the pcb. I smelled smoke and quickly",
"unplugged the printer. Anyway, this is the result and, of course, the heat",
"metallic came into contact with the pcb. I smelled smoke and quickly unplugged",
"course, the heat bed won't heat. Can this be salvaged or should I",
"heat bed unscrewed from the chassis but had forgotten to unplug the printer.",
"smoke and quickly unplugged the printer. Anyway, this is the result and, of",
"should I toss it and buy a new one? [](https://i.stack.imgur.com/WhRPu.jpg) **update** the heat",
"be salvaged or should I toss it and buy a new one? [](https://i.stack.imgur.com/WhRPu.jpg)",
"result and, of course, the heat bed won't heat. Can this be salvaged",
"toss it and buy a new one? [](https://i.stack.imgur.com/WhRPu.jpg) **update** the heat bed was",
"I smelled smoke and quickly unplugged the printer. Anyway, this is the result",
"salvaged or should I toss it and buy a new one? [](https://i.stack.imgur.com/WhRPu.jpg) **update**",
"pcb. I smelled smoke and quickly unplugged the printer. Anyway, this is the",
"the result and, of course, the heat bed won't heat. Can this be",
"the printer. Anyway, this is the result and, of course, the heat bed",
"printer. I am not exactly sure how it shorted but I think it",
"it and buy a new one? [](https://i.stack.imgur.com/WhRPu.jpg) **update** the heat bed was not",
"it shorted but I think it shorted between the power lead connection and",
"the chassis but had forgotten to unplug the printer. I am not exactly",
"or should I toss it and buy a new one? [](https://i.stack.imgur.com/WhRPu.jpg) **update** the",
"heat bed won't heat. Can this be salvaged or should I toss it",
"printer when something metallic came into contact with the pcb. I smelled smoke",
"Can this be salvaged or should I toss it and buy a new",
"heat bed was not hot at the time. I had the heat bed",
"smelled smoke and quickly unplugged the printer. Anyway, this is the result and,",
"my printer when something metallic came into contact with the pcb. I smelled",
"Anyway, this is the result and, of course, the heat bed won't heat.",
"at the time. I had the heat bed unscrewed from the chassis but",
"contact with the pcb. I smelled smoke and quickly unplugged the printer. Anyway,",
"bed was not hot at the time. I had the heat bed unscrewed",
"but had forgotten to unplug the printer. I am not exactly sure how",
"of course, the heat bed won't heat. Can this be salvaged or should",
"quickly unplugged the printer. Anyway, this is the result and, of course, the",
"am not exactly sure how it shorted but I think it shorted between",
"this be salvaged or should I toss it and buy a new one?",
"when something metallic came into contact with the pcb. I smelled smoke and",
"I am not exactly sure how it shorted but I think it shorted"
] |
[
"suggested that filament costs are asymptotically approaching a baseline cost - others that",
"asymptotically approaching a baseline cost - others that costs are linearly decreasing. Does",
"a single class of filament over the past decade or more? Part of",
"filament costs are asymptotically approaching a baseline cost - others that costs are",
"to get enough longitudinal data to begin projecting costs for printing objects in",
"approaching a baseline cost - others that costs are linearly decreasing. Does anyone",
"single class of filament over the past decade or more? Part of the",
"that costs are linearly decreasing. Does anyone know where to find the trending",
"are asking is to get enough longitudinal data to begin projecting costs for",
"is to get enough longitudinal data to begin projecting costs for printing objects",
"costs on a single class of filament over the past decade or more?",
"decade or more? Part of the reason we are asking is to get",
"costs are linearly decreasing. Does anyone know where to find the trending costs",
"in the future. You might think of it like the \"Moore's Law\" of",
"to find the trending costs on a single class of filament over the",
"where to find the trending costs on a single class of filament over",
"decreasing. Does anyone know where to find the trending costs on a single",
"the reason we are asking is to get enough longitudinal data to begin",
"data to begin projecting costs for printing objects in the future. You might",
"that filament costs are asymptotically approaching a baseline cost - others that costs",
"longitudinal data to begin projecting costs for printing objects in the future. You",
"anyone know where to find the trending costs on a single class of",
"costs are asymptotically approaching a baseline cost - others that costs are linearly",
"asking is to get enough longitudinal data to begin projecting costs for printing",
"the future. You might think of it like the \"Moore's Law\" of filament",
"linearly decreasing. Does anyone know where to find the trending costs on a",
"are linearly decreasing. Does anyone know where to find the trending costs on",
"trending costs on a single class of filament over the past decade or",
"a baseline cost - others that costs are linearly decreasing. Does anyone know",
"Some have suggested that filament costs are asymptotically approaching a baseline cost -",
"cost - others that costs are linearly decreasing. Does anyone know where to",
"for printing objects in the future. You might think of it like the",
"future. You might think of it like the \"Moore's Law\" of filament costs.",
"have suggested that filament costs are asymptotically approaching a baseline cost - others",
"to begin projecting costs for printing objects in the future. You might think",
"Does anyone know where to find the trending costs on a single class",
"get enough longitudinal data to begin projecting costs for printing objects in the",
"filament over the past decade or more? Part of the reason we are",
"reason we are asking is to get enough longitudinal data to begin projecting",
"baseline cost - others that costs are linearly decreasing. Does anyone know where",
"know where to find the trending costs on a single class of filament",
"more? Part of the reason we are asking is to get enough longitudinal",
"begin projecting costs for printing objects in the future. You might think of",
"find the trending costs on a single class of filament over the past",
"over the past decade or more? Part of the reason we are asking",
"on a single class of filament over the past decade or more? Part",
"projecting costs for printing objects in the future. You might think of it",
"past decade or more? Part of the reason we are asking is to",
"Part of the reason we are asking is to get enough longitudinal data",
"are asymptotically approaching a baseline cost - others that costs are linearly decreasing.",
"- others that costs are linearly decreasing. Does anyone know where to find",
"of the reason we are asking is to get enough longitudinal data to",
"others that costs are linearly decreasing. Does anyone know where to find the",
"we are asking is to get enough longitudinal data to begin projecting costs",
"or more? Part of the reason we are asking is to get enough",
"of filament over the past decade or more? Part of the reason we",
"enough longitudinal data to begin projecting costs for printing objects in the future.",
"class of filament over the past decade or more? Part of the reason",
"the trending costs on a single class of filament over the past decade",
"objects in the future. You might think of it like the \"Moore's Law\"",
"the past decade or more? Part of the reason we are asking is",
"costs for printing objects in the future. You might think of it like",
"printing objects in the future. You might think of it like the \"Moore's"
] |
[
"a numerical solution for this question, but maybe there is an option to",
"I haven't seen in any slicer an option to export as .stl or",
"how much infill percentage affects the stiffness of the part. I know that",
"this question, but maybe there is an option to simulate in software an",
"export as .stl or .step or any other format which can be accepted",
"printing facility of an engineering school, students are always wondering how much infill",
"can be accepted by simulation software. Has anyone seen or thought about something",
"of an engineering school, students are always wondering how much infill percentage affects",
"affects the stiffness of the part. I know that it is impossible to",
"running a 3D printing facility of an engineering school, students are always wondering",
"school, students are always wondering how much infill percentage affects the stiffness of",
"3D printing facility of an engineering school, students are always wondering how much",
"the part. I know that it is impossible to get a numerical solution",
"sliced model. I haven't seen in any slicer an option to export as",
"seen in any slicer an option to export as .stl or .step or",
"or .step or any other format which can be accepted by simulation software.",
"or any other format which can be accepted by simulation software. Has anyone",
"always wondering how much infill percentage affects the stiffness of the part. I",
"infill percentage affects the stiffness of the part. I know that it is",
"I know that it is impossible to get a numerical solution for this",
"know that it is impossible to get a numerical solution for this question,",
"I'm running a 3D printing facility of an engineering school, students are always",
"software an already sliced model. I haven't seen in any slicer an option",
"the stiffness of the part. I know that it is impossible to get",
"question, but maybe there is an option to simulate in software an already",
"an option to simulate in software an already sliced model. I haven't seen",
"is an option to simulate in software an already sliced model. I haven't",
"is impossible to get a numerical solution for this question, but maybe there",
"to export as .stl or .step or any other format which can be",
"other format which can be accepted by simulation software. Has anyone seen or",
"any slicer an option to export as .stl or .step or any other",
"an engineering school, students are always wondering how much infill percentage affects the",
"maybe there is an option to simulate in software an already sliced model.",
"an option to export as .stl or .step or any other format which",
"engineering school, students are always wondering how much infill percentage affects the stiffness",
"a 3D printing facility of an engineering school, students are always wondering how",
"that it is impossible to get a numerical solution for this question, but",
"to get a numerical solution for this question, but maybe there is an",
"facility of an engineering school, students are always wondering how much infill percentage",
"it is impossible to get a numerical solution for this question, but maybe",
"solution for this question, but maybe there is an option to simulate in",
"but maybe there is an option to simulate in software an already sliced",
"option to simulate in software an already sliced model. I haven't seen in",
"haven't seen in any slicer an option to export as .stl or .step",
"slicer an option to export as .stl or .step or any other format",
"part. I know that it is impossible to get a numerical solution for",
"which can be accepted by simulation software. Has anyone seen or thought about",
"be accepted by simulation software. Has anyone seen or thought about something similar?",
"students are always wondering how much infill percentage affects the stiffness of the",
"as .stl or .step or any other format which can be accepted by",
".stl or .step or any other format which can be accepted by simulation",
"already sliced model. I haven't seen in any slicer an option to export",
"to simulate in software an already sliced model. I haven't seen in any",
"impossible to get a numerical solution for this question, but maybe there is",
"get a numerical solution for this question, but maybe there is an option",
"format which can be accepted by simulation software. Has anyone seen or thought",
"for this question, but maybe there is an option to simulate in software",
"much infill percentage affects the stiffness of the part. I know that it",
"in software an already sliced model. I haven't seen in any slicer an",
".step or any other format which can be accepted by simulation software. Has",
"numerical solution for this question, but maybe there is an option to simulate",
"any other format which can be accepted by simulation software. Has anyone seen",
"simulate in software an already sliced model. I haven't seen in any slicer",
"stiffness of the part. I know that it is impossible to get a",
"in any slicer an option to export as .stl or .step or any",
"option to export as .stl or .step or any other format which can",
"wondering how much infill percentage affects the stiffness of the part. I know",
"model. I haven't seen in any slicer an option to export as .stl",
"are always wondering how much infill percentage affects the stiffness of the part.",
"Since I'm running a 3D printing facility of an engineering school, students are",
"there is an option to simulate in software an already sliced model. I",
"of the part. I know that it is impossible to get a numerical",
"an already sliced model. I haven't seen in any slicer an option to",
"percentage affects the stiffness of the part. I know that it is impossible"
] |
[
"that communicates directly with the RAMPS board (or any other 3D printer driver)",
"matter if it runs on Windows or linux as long as it's opensource.",
"the RAMPS board (or any other 3D printer driver) without using the arduino...",
"communicates directly with the RAMPS board (or any other 3D printer driver) without",
"directly with the RAMPS board (or any other 3D printer driver) without using",
"software that communicates directly with the RAMPS board (or any other 3D printer",
"any other 3D printer driver) without using the arduino... It doesn't matter if",
"board (or any other 3D printer driver) without using the arduino... It doesn't",
"as long as it's opensource. Also, I'm not worried about how this communication",
"done (USB, serial port, parallel port)... Has anyone ever heard about projects like",
"on Windows or linux as long as it's opensource. Also, I'm not worried",
"opensource. Also, I'm not worried about how this communication is done (USB, serial",
"arduino... It doesn't matter if it runs on Windows or linux as long",
"(USB, serial port, parallel port)... Has anyone ever heard about projects like this?",
"it runs on Windows or linux as long as it's opensource. Also, I'm",
"worried about how this communication is done (USB, serial port, parallel port)... Has",
"driver) without using the arduino... It doesn't matter if it runs on Windows",
"or linux as long as it's opensource. Also, I'm not worried about how",
"opensource software that communicates directly with the RAMPS board (or any other 3D",
"communication is done (USB, serial port, parallel port)... Has anyone ever heard about",
"using the arduino... It doesn't matter if it runs on Windows or linux",
"3D printer driver) without using the arduino... It doesn't matter if it runs",
"runs on Windows or linux as long as it's opensource. Also, I'm not",
"It doesn't matter if it runs on Windows or linux as long as",
"printer driver) without using the arduino... It doesn't matter if it runs on",
"is done (USB, serial port, parallel port)... Has anyone ever heard about projects",
"doesn't matter if it runs on Windows or linux as long as it's",
"without using the arduino... It doesn't matter if it runs on Windows or",
"this communication is done (USB, serial port, parallel port)... Has anyone ever heard",
"(or any other 3D printer driver) without using the arduino... It doesn't matter",
"if it runs on Windows or linux as long as it's opensource. Also,",
"not worried about how this communication is done (USB, serial port, parallel port)...",
"it's opensource. Also, I'm not worried about how this communication is done (USB,",
"as it's opensource. Also, I'm not worried about how this communication is done",
"RAMPS board (or any other 3D printer driver) without using the arduino... It",
"like to find an opensource software that communicates directly with the RAMPS board",
"the arduino... It doesn't matter if it runs on Windows or linux as",
"Windows or linux as long as it's opensource. Also, I'm not worried about",
"other 3D printer driver) without using the arduino... It doesn't matter if it",
"long as it's opensource. Also, I'm not worried about how this communication is",
"I'd like to find an opensource software that communicates directly with the RAMPS",
"an opensource software that communicates directly with the RAMPS board (or any other",
"with the RAMPS board (or any other 3D printer driver) without using the",
"find an opensource software that communicates directly with the RAMPS board (or any",
"to find an opensource software that communicates directly with the RAMPS board (or",
"linux as long as it's opensource. Also, I'm not worried about how this",
"how this communication is done (USB, serial port, parallel port)... Has anyone ever",
"I'm not worried about how this communication is done (USB, serial port, parallel",
"about how this communication is done (USB, serial port, parallel port)... Has anyone",
"Also, I'm not worried about how this communication is done (USB, serial port,"
] |
[
"do FDM. The item has a ball valve. and the ball ~ 1.6-1.9mm",
"figure showing the direction of air flow. Update: Thanks both answers are helpful.",
"clearance of 0.1mm is used ](https://i.stack.imgur.com/0neFf.png)](https://i.stack.imgur.com/0neFf.png) Update: [](https://i.stack.imgur.com/Byftf.png)",
"Hey so theres a product we have been prototyping. We cant do FDM.",
"answer. Then again, there is no correct answer. Thanks a bunch. Lets see",
"Polyjet. Anybody knows what could be wrong, or what should be the dimension",
"should be the dimension i should be using? I thought I would post",
"dia. clearance of 0.1mm is used ](https://i.stack.imgur.com/0neFf.png)](https://i.stack.imgur.com/0neFf.png) Update: [](https://i.stack.imgur.com/0neFf.png)",
"its best if its in 3D Printing section Edit: [](https://i.stack.imgur.com/Byftf.png) So heres a figure showing the direction",
"in dia. clearance of 0.1mm is used ](https://i.stack.imgur.com/0neFf.png)](https://i.stack.imgur.com/0neFf.png) Update: [](https://i.stack.imgur.com/0neFf.png) Update: [](https://i.stack.imgur.com/Byftf.png) So heres a",
"this at engineering section, but since I have to prototype I thought its",
"prototype it. I have tried SLS, SLA, Polyjet. Anybody knows what could be",
"ball valve. and the ball ~ 1.6-1.9mm I cant seem to prototype it.",
"knows what could be wrong, or what should be the dimension i should",
"direction of air](https://i.stack.imgur.com/Byftf.png)](https://i.stack.imgur.com/Byftf.png) So heres a figure showing the direction of air flow.",
"should be using? I thought I would post this at engineering section, but",
"a precise answer. Then again, there is no correct answer. Thanks a bunch.",
"explains the direction of air](https://i.stack.imgur.com/Byftf.png)](https://i.stack.imgur.com/Byftf.png) So heres a figure showing the direction of",
"Edit: [](https://i.stack.imgur.com/0neFf.png) Update:",
"could be wrong, or what should be the dimension i should be using?",
"both answers are helpful. though not a precise answer. Then again, there is",
"1.6-1.9mm I cant seem to prototype it. I have tried SLS, SLA, Polyjet.",
"a ball valve. and the ball ~ 1.6-1.9mm I cant seem to prototype",
"a figure showing the direction of air flow. Update: Thanks both answers are",
"I thought I would post this at engineering section, but since I have",
"The item has a ball valve. and the ball ~ 1.6-1.9mm I cant",
"post this at engineering section, but since I have to prototype I thought",
"FDM. The item has a ball valve. and the ball ~ 1.6-1.9mm I",
"SLA, Polyjet. Anybody knows what could be wrong, or what should be the",
"no correct answer. Thanks a bunch. Lets see how the coming months are.",
"I have tried SLS, SLA, Polyjet. Anybody knows what could be wrong, or",
"prototyping. We cant do FDM. The item has a ball valve. and the",
"are helpful. though not a precise answer. Then again, there is no correct",
"We cant do FDM. The item has a ball valve. and the ball",
"is 2mm in dia. clearance of 0.1mm is used ](https://i.stack.imgur.com/0neFf.png)](https://i.stack.imgur.com/0neFf.png) Update: [](https://i.stack.imgur.com/Byftf.png) So heres a figure showing the direction of air flow. Update:",
"the ball ~ 1.6-1.9mm I cant seem to prototype it. I have tried",
"~ 1.6-1.9mm I cant seem to prototype it. I have tried SLS, SLA,",
"0.1mm is used ](https://i.stack.imgur.com/0neFf.png)](https://i.stack.imgur.com/0neFf.png) Update: [](https://i.stack.imgur.com/Byftf.png) So heres",
"prototype I thought its best if its in 3D Printing section Edit: [](https://i.stack.imgur.com/0neFf.png) Update: [](https://i.stack.imgur.com/Byftf.png) So",
"the direction of air](https://i.stack.imgur.com/Byftf.png)](https://i.stack.imgur.com/Byftf.png) So heres a figure showing the direction of air",
"Thanks both answers are helpful. though not a precise answer. Then again, there",
"heres a figure showing the direction of air flow. Update: Thanks both answers",
"item has a ball valve. and the ball ~ 1.6-1.9mm I cant seem",
"I thought its best if its in 3D Printing section Edit: [](https://i.stack.imgur.com/0neFf.png) Update: [](https://i.stack.imgur.com/0neFf.png) Update: [](https://i.stack.imgur.com/Byftf.png) So heres a figure",
"Then again, there is no correct answer. Thanks a bunch. Lets see how",
"have to prototype I thought its best if its in 3D Printing section",
"using? I thought I would post this at engineering section, but since I",
"](https://i.stack.imgur.com/0neFf.png)](https://i.stack.imgur.com/0neFf.png) Update: [](https://i.stack.imgur.com/Byftf.png) So heres a figure showing",
"and the ball ~ 1.6-1.9mm I cant seem to prototype it. I have",
"the dimension i should be using? I thought I would post this at",
"section, but since I have to prototype I thought its best if its",
"cant do FDM. The item has a ball valve. and the ball ~",
"theres a product we have been prototyping. We cant do FDM. The item",
"thought I would post this at engineering section, but since I have to",
"SLS, SLA, Polyjet. Anybody knows what could be wrong, or what should be",
"so theres a product we have been prototyping. We cant do FDM. The",
"i should be using? I thought I would post this at engineering section,",
"direction of air flow. Update: Thanks both answers are helpful. though not a",
"helpful. though not a precise answer. Then again, there is no correct answer.",
"ball ~ 1.6-1.9mm I cant seem to prototype it. I have tried SLS,",
"So heres a figure showing the direction of air flow. Update: Thanks both",
"air](https://i.stack.imgur.com/Byftf.png)](https://i.stack.imgur.com/Byftf.png) So heres a figure showing the direction of air flow. Update: Thanks",
"[](https://i.stack.imgur.com/0neFf.png) Update: [](https://i.stack.imgur.com/Byftf.png) So heres a figure showing the",
"to prototype I thought its best if its in 3D Printing section Edit:",
"I have to prototype I thought its best if its in 3D Printing"
] |
[
"can animate the way the .stl object will be printed? I'm not talking",
"the given object as an animation. I know it somehow depends on your",
"be printed? I'm not talking about what the end result looks like. I'm",
"you can animate the way the .stl object will be printed? I'm not",
"end result looks like. I'm talking about a tool which acts like it's",
"any type of software in which you can animate the way the .stl",
"talking about what the end result looks like. I'm talking about a tool",
"like. I'm talking about a tool which acts like it's printing the given",
"know it somehow depends on your printer but is there anything I can",
"animate the way the .stl object will be printed? I'm not talking about",
"Is there any type of software in which you can animate the way",
"of software in which you can animate the way the .stl object will",
"like it's printing the given object as an animation. I know it somehow",
"I know it somehow depends on your printer but is there anything I",
"not talking about what the end result looks like. I'm talking about a",
"looks like. I'm talking about a tool which acts like it's printing the",
"type of software in which you can animate the way the .stl object",
"the .stl object will be printed? I'm not talking about what the end",
"the way the .stl object will be printed? I'm not talking about what",
"acts like it's printing the given object as an animation. I know it",
"it's printing the given object as an animation. I know it somehow depends",
"animation. I know it somehow depends on your printer but is there anything",
"I'm talking about a tool which acts like it's printing the given object",
"way the .stl object will be printed? I'm not talking about what the",
"there any type of software in which you can animate the way the",
"object as an animation. I know it somehow depends on your printer but",
"printed? I'm not talking about what the end result looks like. I'm talking",
"software in which you can animate the way the .stl object will be",
"I'm not talking about what the end result looks like. I'm talking about",
"which acts like it's printing the given object as an animation. I know",
"as an animation. I know it somehow depends on your printer but is",
"result looks like. I'm talking about a tool which acts like it's printing",
"will be printed? I'm not talking about what the end result looks like.",
"what the end result looks like. I'm talking about a tool which acts",
"tool which acts like it's printing the given object as an animation. I",
"given object as an animation. I know it somehow depends on your printer",
"which you can animate the way the .stl object will be printed? I'm",
"it somehow depends on your printer but is there anything I can use?",
"object will be printed? I'm not talking about what the end result looks",
"an animation. I know it somehow depends on your printer but is there",
"talking about a tool which acts like it's printing the given object as",
"printing the given object as an animation. I know it somehow depends on",
"in which you can animate the way the .stl object will be printed?",
"a tool which acts like it's printing the given object as an animation.",
"about a tool which acts like it's printing the given object as an",
"the end result looks like. I'm talking about a tool which acts like",
".stl object will be printed? I'm not talking about what the end result",
"about what the end result looks like. I'm talking about a tool which"
] |
[
"after a couple straight hours of prints. I am guessing that there is",
"a design flaw and that the media is melting inside the extruder before",
"of prints. It is a couple months old, and the tip stops extruding",
"is melting inside the extruder before the feeding teeth. Does anyone have experience",
"the media is melting inside the extruder before the feeding teeth. Does anyone",
"inside the extruder before the feeding teeth. Does anyone have experience with this?",
"guessing that there is a design flaw and that the media is melting",
"is a design flaw and that the media is melting inside the extruder",
"tip stops extruding after a couple straight hours of prints. I am guessing",
"straight hours of prints. I am guessing that there is a design flaw",
"there is a design flaw and that the media is melting inside the",
"prints. I am guessing that there is a design flaw and that the",
"and that the media is melting inside the extruder before the feeding teeth.",
"media is melting inside the extruder before the feeding teeth. Does anyone have",
"that the media is melting inside the extruder before the feeding teeth. Does",
"My MakerBot 2 jams after a couple hours of prints. It is a",
"is a couple months old, and the tip stops extruding after a couple",
"2 jams after a couple hours of prints. It is a couple months",
"jams after a couple hours of prints. It is a couple months old,",
"MakerBot 2 jams after a couple hours of prints. It is a couple",
"am guessing that there is a design flaw and that the media is",
"design flaw and that the media is melting inside the extruder before the",
"a couple months old, and the tip stops extruding after a couple straight",
"hours of prints. It is a couple months old, and the tip stops",
"extruding after a couple straight hours of prints. I am guessing that there",
"the tip stops extruding after a couple straight hours of prints. I am",
"that there is a design flaw and that the media is melting inside",
"couple months old, and the tip stops extruding after a couple straight hours",
"stops extruding after a couple straight hours of prints. I am guessing that",
"I am guessing that there is a design flaw and that the media",
"a couple hours of prints. It is a couple months old, and the",
"flaw and that the media is melting inside the extruder before the feeding",
"of prints. I am guessing that there is a design flaw and that",
"old, and the tip stops extruding after a couple straight hours of prints.",
"months old, and the tip stops extruding after a couple straight hours of",
"hours of prints. I am guessing that there is a design flaw and",
"melting inside the extruder before the feeding teeth. Does anyone have experience with",
"It is a couple months old, and the tip stops extruding after a",
"and the tip stops extruding after a couple straight hours of prints. I",
"prints. It is a couple months old, and the tip stops extruding after",
"after a couple hours of prints. It is a couple months old, and",
"couple straight hours of prints. I am guessing that there is a design",
"couple hours of prints. It is a couple months old, and the tip",
"a couple straight hours of prints. I am guessing that there is a"
] |
[
"talks about it, has already some basic knowledge about the topic. What are",
"of a \"reserved\" topic. Meaning that everyone who talks about it, has already",
"topic. What are some good resources for someone who wants to start learning",
"start learning from zero? My main goal is to acquire enough knowledge in",
"I've been interested in 3D printing for the past month however, I have",
"interested in 3D printing for the past month however, I have noticed that",
"about the topic. What are some good resources for someone who wants to",
"for someone who wants to start learning from zero? My main goal is",
"past month however, I have noticed that it's sort of a \"reserved\" topic.",
"to start learning from zero? My main goal is to acquire enough knowledge",
"about it, has already some basic knowledge about the topic. What are some",
"the topic. What are some good resources for someone who wants to start",
"sort of a \"reserved\" topic. Meaning that everyone who talks about it, has",
"month however, I have noticed that it's sort of a \"reserved\" topic. Meaning",
"goal is to acquire enough knowledge in order to build my own 3D",
"that it's sort of a \"reserved\" topic. Meaning that everyone who talks about",
"however, I have noticed that it's sort of a \"reserved\" topic. Meaning that",
"is to acquire enough knowledge in order to build my own 3D printer.",
"printing for the past month however, I have noticed that it's sort of",
"noticed that it's sort of a \"reserved\" topic. Meaning that everyone who talks",
"some basic knowledge about the topic. What are some good resources for someone",
"3D printing for the past month however, I have noticed that it's sort",
"learning from zero? My main goal is to acquire enough knowledge in order",
"have noticed that it's sort of a \"reserved\" topic. Meaning that everyone who",
"it, has already some basic knowledge about the topic. What are some good",
"some good resources for someone who wants to start learning from zero? My",
"a \"reserved\" topic. Meaning that everyone who talks about it, has already some",
"it's sort of a \"reserved\" topic. Meaning that everyone who talks about it,",
"good resources for someone who wants to start learning from zero? My main",
"resources for someone who wants to start learning from zero? My main goal",
"someone who wants to start learning from zero? My main goal is to",
"zero? My main goal is to acquire enough knowledge in order to build",
"that everyone who talks about it, has already some basic knowledge about the",
"has already some basic knowledge about the topic. What are some good resources",
"who talks about it, has already some basic knowledge about the topic. What",
"in 3D printing for the past month however, I have noticed that it's",
"everyone who talks about it, has already some basic knowledge about the topic.",
"main goal is to acquire enough knowledge in order to build my own",
"who wants to start learning from zero? My main goal is to acquire",
"wants to start learning from zero? My main goal is to acquire enough",
"Meaning that everyone who talks about it, has already some basic knowledge about",
"are some good resources for someone who wants to start learning from zero?",
"knowledge about the topic. What are some good resources for someone who wants",
"the past month however, I have noticed that it's sort of a \"reserved\"",
"been interested in 3D printing for the past month however, I have noticed",
"I have noticed that it's sort of a \"reserved\" topic. Meaning that everyone",
"What are some good resources for someone who wants to start learning from",
"basic knowledge about the topic. What are some good resources for someone who",
"from zero? My main goal is to acquire enough knowledge in order to",
"\"reserved\" topic. Meaning that everyone who talks about it, has already some basic",
"My main goal is to acquire enough knowledge in order to build my",
"for the past month however, I have noticed that it's sort of a",
"already some basic knowledge about the topic. What are some good resources for",
"topic. Meaning that everyone who talks about it, has already some basic knowledge"
] |
[
"is horrific. Blocky as hell. Right now the encoding is set up at",
"quality out of my time lapses generated by OctoPrint. I'm using the Raspberry",
"with a Pi 3. I've already edited the Octopi config to get 720p",
"time lapses generated by OctoPrint. I'm using the Raspberry Pi Camera Module V2",
"the Octopi config to get 720p resolution, but the encoding during time lapse",
"3. I've already edited the Octopi config to get 720p resolution, but the",
"resolution, but the encoding during time lapse rendering is horrific. Blocky as hell.",
"the encoding during time lapse rendering is horrific. Blocky as hell. Right now",
"a little better quality out of my time lapses generated by OctoPrint. I'm",
"the encoding is set up at 5000k. What am I doing wrong here?",
"hell. Right now the encoding is set up at 5000k. What am I",
"already edited the Octopi config to get 720p resolution, but the encoding during",
"by OctoPrint. I'm using the Raspberry Pi Camera Module V2 with a Pi",
"Pi 3. I've already edited the Octopi config to get 720p resolution, but",
"out of my time lapses generated by OctoPrint. I'm using the Raspberry Pi",
"V2 with a Pi 3. I've already edited the Octopi config to get",
"a Pi 3. I've already edited the Octopi config to get 720p resolution,",
"I'm using the Raspberry Pi Camera Module V2 with a Pi 3. I've",
"as hell. Right now the encoding is set up at 5000k. What am",
"the Raspberry Pi Camera Module V2 with a Pi 3. I've already edited",
"encoding during time lapse rendering is horrific. Blocky as hell. Right now the",
"Camera Module V2 with a Pi 3. I've already edited the Octopi config",
"I'm trying to squeeze a little better quality out of my time lapses",
"lapse rendering is horrific. Blocky as hell. Right now the encoding is set",
"rendering is horrific. Blocky as hell. Right now the encoding is set up",
"I've already edited the Octopi config to get 720p resolution, but the encoding",
"now the encoding is set up at 5000k. What am I doing wrong",
"OctoPrint. I'm using the Raspberry Pi Camera Module V2 with a Pi 3.",
"Raspberry Pi Camera Module V2 with a Pi 3. I've already edited the",
"lapses generated by OctoPrint. I'm using the Raspberry Pi Camera Module V2 with",
"get 720p resolution, but the encoding during time lapse rendering is horrific. Blocky",
"Pi Camera Module V2 with a Pi 3. I've already edited the Octopi",
"trying to squeeze a little better quality out of my time lapses generated",
"but the encoding during time lapse rendering is horrific. Blocky as hell. Right",
"to get 720p resolution, but the encoding during time lapse rendering is horrific.",
"during time lapse rendering is horrific. Blocky as hell. Right now the encoding",
"config to get 720p resolution, but the encoding during time lapse rendering is",
"edited the Octopi config to get 720p resolution, but the encoding during time",
"to squeeze a little better quality out of my time lapses generated by",
"using the Raspberry Pi Camera Module V2 with a Pi 3. I've already",
"little better quality out of my time lapses generated by OctoPrint. I'm using",
"my time lapses generated by OctoPrint. I'm using the Raspberry Pi Camera Module",
"Right now the encoding is set up at 5000k. What am I doing",
"Blocky as hell. Right now the encoding is set up at 5000k. What",
"Module V2 with a Pi 3. I've already edited the Octopi config to",
"time lapse rendering is horrific. Blocky as hell. Right now the encoding is",
"of my time lapses generated by OctoPrint. I'm using the Raspberry Pi Camera",
"horrific. Blocky as hell. Right now the encoding is set up at 5000k.",
"720p resolution, but the encoding during time lapse rendering is horrific. Blocky as",
"better quality out of my time lapses generated by OctoPrint. I'm using the",
"squeeze a little better quality out of my time lapses generated by OctoPrint.",
"generated by OctoPrint. I'm using the Raspberry Pi Camera Module V2 with a",
"Octopi config to get 720p resolution, but the encoding during time lapse rendering"
] |
[
"slurry) * Prevent air draft. I've added acrylic panels to the sides of",
"ensured the following conditions regularly: * Build plate is level * Base of",
"(I live in NW USA, so the ambient temperature is typically fairly cool).",
"and the machine is in a custom cupboard. * Nozzle temperature at about",
"many times. I've ensured the following conditions regularly: * Build plate is level",
"following conditions regularly: * Build plate is level * Base of print isn't",
"cool). * Using MakerBot filament What are some other variables to consider to",
"printed mostly ABS in the past and encountered [delamination](https://www.google.com/#q=3d+printing+layer+delamination) between layers many times.",
"* Build plate is level * Base of print isn't warped (using ABS",
"live in NW USA, so the ambient temperature is typically fairly cool). *",
"mostly ABS in the past and encountered [delamination](https://www.google.com/#q=3d+printing+layer+delamination) between layers many times. I've",
"past and encountered [delamination](https://www.google.com/#q=3d+printing+layer+delamination) between layers many times. I've ensured the following conditions",
"* Prevent air draft. I've added acrylic panels to the sides of the",
"What are some other variables to consider to help prevent delamination between layers?",
"level * Base of print isn't warped (using ABS slurry) * Prevent air",
"the following conditions regularly: * Build plate is level * Base of print",
"regularly: * Build plate is level * Base of print isn't warped (using",
"draft. I've added acrylic panels to the sides of the machine and the",
"* Nozzle temperature at about 225C * HBP temperature at about 112C (I",
"Build plate is level * Base of print isn't warped (using ABS slurry)",
"I've printed mostly ABS in the past and encountered [delamination](https://www.google.com/#q=3d+printing+layer+delamination) between layers many",
"warped (using ABS slurry) * Prevent air draft. I've added acrylic panels to",
"conditions regularly: * Build plate is level * Base of print isn't warped",
"the machine and the machine is in a custom cupboard. * Nozzle temperature",
"* HBP temperature at about 112C (I live in NW USA, so the",
"the machine is in a custom cupboard. * Nozzle temperature at about 225C",
"the sides of the machine and the machine is in a custom cupboard.",
"ABS slurry) * Prevent air draft. I've added acrylic panels to the sides",
"a custom cupboard. * Nozzle temperature at about 225C * HBP temperature at",
"about 225C * HBP temperature at about 112C (I live in NW USA,",
"* Base of print isn't warped (using ABS slurry) * Prevent air draft.",
"at about 112C (I live in NW USA, so the ambient temperature is",
"the past and encountered [delamination](https://www.google.com/#q=3d+printing+layer+delamination) between layers many times. I've ensured the following",
"cupboard. * Nozzle temperature at about 225C * HBP temperature at about 112C",
"typically fairly cool). * Using MakerBot filament What are some other variables to",
"HBP temperature at about 112C (I live in NW USA, so the ambient",
"of print isn't warped (using ABS slurry) * Prevent air draft. I've added",
"about 112C (I live in NW USA, so the ambient temperature is typically",
"Prevent air draft. I've added acrylic panels to the sides of the machine",
"panels to the sides of the machine and the machine is in a",
"Using MakerBot filament What are some other variables to consider to help prevent",
"[delamination](https://www.google.com/#q=3d+printing+layer+delamination) between layers many times. I've ensured the following conditions regularly: * Build",
"* Using MakerBot filament What are some other variables to consider to help",
"is level * Base of print isn't warped (using ABS slurry) * Prevent",
"custom cupboard. * Nozzle temperature at about 225C * HBP temperature at about",
"I've ensured the following conditions regularly: * Build plate is level * Base",
"is typically fairly cool). * Using MakerBot filament What are some other variables",
"USA, so the ambient temperature is typically fairly cool). * Using MakerBot filament",
"to the sides of the machine and the machine is in a custom",
"air draft. I've added acrylic panels to the sides of the machine and",
"encountered [delamination](https://www.google.com/#q=3d+printing+layer+delamination) between layers many times. I've ensured the following conditions regularly: *",
"Nozzle temperature at about 225C * HBP temperature at about 112C (I live",
"fairly cool). * Using MakerBot filament What are some other variables to consider",
"in the past and encountered [delamination](https://www.google.com/#q=3d+printing+layer+delamination) between layers many times. I've ensured the",
"machine is in a custom cupboard. * Nozzle temperature at about 225C *",
"between layers many times. I've ensured the following conditions regularly: * Build plate",
"temperature at about 112C (I live in NW USA, so the ambient temperature",
"temperature is typically fairly cool). * Using MakerBot filament What are some other",
"ambient temperature is typically fairly cool). * Using MakerBot filament What are some",
"at about 225C * HBP temperature at about 112C (I live in NW",
"in NW USA, so the ambient temperature is typically fairly cool). * Using",
"acrylic panels to the sides of the machine and the machine is in",
"times. I've ensured the following conditions regularly: * Build plate is level *",
"added acrylic panels to the sides of the machine and the machine is",
"temperature at about 225C * HBP temperature at about 112C (I live in",
"ABS in the past and encountered [delamination](https://www.google.com/#q=3d+printing+layer+delamination) between layers many times. I've ensured",
"layers many times. I've ensured the following conditions regularly: * Build plate is",
"in a custom cupboard. * Nozzle temperature at about 225C * HBP temperature",
"plate is level * Base of print isn't warped (using ABS slurry) *",
"print isn't warped (using ABS slurry) * Prevent air draft. I've added acrylic",
"isn't warped (using ABS slurry) * Prevent air draft. I've added acrylic panels",
"112C (I live in NW USA, so the ambient temperature is typically fairly",
"the ambient temperature is typically fairly cool). * Using MakerBot filament What are",
"is in a custom cupboard. * Nozzle temperature at about 225C * HBP",
"so the ambient temperature is typically fairly cool). * Using MakerBot filament What",
"MakerBot filament What are some other variables to consider to help prevent delamination",
"I've added acrylic panels to the sides of the machine and the machine",
"225C * HBP temperature at about 112C (I live in NW USA, so",
"(using ABS slurry) * Prevent air draft. I've added acrylic panels to the",
"machine and the machine is in a custom cupboard. * Nozzle temperature at",
"of the machine and the machine is in a custom cupboard. * Nozzle",
"and encountered [delamination](https://www.google.com/#q=3d+printing+layer+delamination) between layers many times. I've ensured the following conditions regularly:",
"filament What are some other variables to consider to help prevent delamination between",
"Base of print isn't warped (using ABS slurry) * Prevent air draft. I've",
"sides of the machine and the machine is in a custom cupboard. *",
"NW USA, so the ambient temperature is typically fairly cool). * Using MakerBot"
] |
[
"filament gets hot, it melts and bends and curls which makes it NOT",
"the heater. The top of that (above the white arrow) is inside the",
"filament, it is always twisted in a spiral (helix) shape like a corkscrew.",
"new PLA filament and am getting frequent clogs in my extruder. I've had",
"ABS, but the ABS would peel up from the heated bed, so somebody",
"[](https://i.stack.imgur.com/hFkPM.jpg) Here is a picture of my heat tip. Note the shaft",
"sticking out of the heater. The top of that (above the white arrow)",
"By the way, pay no attention to the black marks on the green",
"all the way down to 180 in increments of 5 degrees and seem",
"filament goes through that tube on its way to the head and gets",
"had the same problem with the extruder just clogging up and twisting the",
"couple weeks. It had been printing fine with ABS, but the ABS would",
"It had been printing fine with ABS, but the ABS would peel up",
"way to the head and gets soft in the tube because the tube",
"with a sharpie marker to see if it's still being extruded. [](https://i.stack.imgur.com/qKNR5.jpg)",
"(once the bed cools a bit). Please let me know if you've had",
"you've had the same problem with the extruder just clogging up and twisting",
"inside the metal throat. [](https://i.stack.imgur.com/i05Vo.png) [](https://i.stack.imgur.com/08pZq.png)",
"into a corkscrew shape. By the way, pay no attention to the black",
"NOT push itself into the heated tip and out onto whatever I'm printing.",
"some way to cool this 1 inch shaft between the heat sink and",
"and gets soft in the tube because the tube is so hot all",
"the heat sink and the heated head so that the filament inside of",
"from the heat element to the heat sink. This 1 inch of tubing",
"below. That's just me marking every half inch or so with a sharpie",
"Hairspray is AWESOME !! It sticks really well and removes easily as well",
"the filament into a corkscrew shape. By the way, pay no attention to",
"it melts and bends and curls which makes it NOT push itself into",
"extruder just clogging up and twisting the filament into a corkscrew shape. By",
"arrow) is inside the heat sink. But 3/4 inches of it are bare",
"When it clogs, and I pull out the filament, it is always twisted",
"would peel up from the heated bed, so somebody suggested that I use",
"REALLY hot and larger than 1.75mm. So, the filament goes through that tube",
"and twisting the filament into a corkscrew shape. By the way, pay no",
"gets hot, it melts and bends and curls which makes it NOT push",
"a solution... Take a look at the image below. There is a 1",
"sink. But 3/4 inches of it are bare and uncovered. There is also",
"Note the shaft has about 1 inch sticking out of the heater. The",
"to see if it's still being extruded. [](https://i.stack.imgur.com/qKNR5.jpg) I think I figured",
"printing. The solution would be to find some way to cool this 1",
"below. There is a 1 inch tube that goes from the heat element",
"in a spiral (helix) shape like a corkscrew. I have put a picture",
"to cool this 1 inch shaft between the heat sink and the heated",
"it NOT push itself into the heated tip and out onto whatever I'm",
"way down to the head. When the filament gets hot, it melts and",
"way, pay no attention to the black marks on the green filament below.",
"shaft has about 1 inch sticking out of the heater. The top of",
"clogging up and twisting the filament into a corkscrew shape. By the way,",
"somebody suggested that I use PLA and hairspray. Hairspray is AWESOME !! It",
"inside the heat sink. But 3/4 inches of it are bare and uncovered.",
"which makes it NOT push itself into the heated tip and out onto",
"it clogs, and I pull out the filament, it is always twisted in",
"clogs in my extruder. I've had this problem with 2 different filaments from",
"that tube on its way to the head and gets soft in the",
"cool this 1 inch shaft between the heat sink and the heated head",
"with ABS, but the ABS would peel up from the heated bed, so",
"has about 1 inch sticking out of the heater. The top of that",
"larger than 1.75mm. So, the filament goes through that tube on its way",
"shaft between the heat sink and the heated head so that the filament",
"on the green filament below. That's just me marking every half inch or",
"weeks. It had been printing fine with ABS, but the ABS would peel",
"extruded. [](https://i.stack.imgur.com/qKNR5.jpg) I think I figured out the problem. Now, to figure",
"head. When the filament gets hot, it melts and bends and curls which",
"PLA and hairspray. Hairspray is AWESOME !! It sticks really well and removes",
"ever seem to go more than 5 minutes before clogging. When it clogs,",
"more than 5 minutes before clogging. When it clogs, and I pull out",
"white arrow) is inside the heat sink. But 3/4 inches of it are",
"1.75mm. So, the filament goes through that tube on its way to the",
"the tube because the tube is so hot all the way down to",
"using brand new PLA filament and am getting frequent clogs in my extruder.",
"go more than 5 minutes before clogging. When it clogs, and I pull",
"really well and removes easily as well (once the bed cools a bit).",
"Assembly](https://i.stack.imgur.com/hFkPM.jpg)](https://i.stack.imgur.com/hFkPM.jpg) Here is a picture of my heat tip. Note the shaft has",
"The top of that (above the white arrow) is inside the heat sink.",
"am using an HIC PRUSA I3 printer with a single extruder head. I've",
"the heat sink. This 1 inch of tubing is REALLY hot and larger",
"so that the filament inside of it won't melt. Any ideas??? [](https://i.stack.imgur.com/hFkPM.jpg)",
"minutes before clogging. When it clogs, and I pull out the filament, it",
"after a few layers, it clogs up and stops extruding. I am using",
"attention to the black marks on the green filament below. That's just me",
"inches of it are bare and uncovered. There is also no teflon tube",
"picture of 2 clogs below. I have tried using temperature of 220 all",
"head so that the filament inside of it won't melt. Any ideas??? [](https://i.stack.imgur.com/i05Vo.png) [](https://i.stack.imgur.com/i05Vo.png)",
"the 70 degree heated bed. No warping or peeling off. However, after a",
"Any ideas??? [](https://i.stack.imgur.com/hFkPM.jpg) Here is a picture of my heat tip. Note",
"out onto whatever I'm printing. The solution would be to find some way",
"sink. This 1 inch of tubing is REALLY hot and larger than 1.75mm.",
"to 180 in increments of 5 degrees and seem to get the same",
"the shaft has about 1 inch sticking out of the heater. The top",
"suggested that I use PLA and hairspray. Hairspray is AWESOME !! It sticks",
"fine, then clog up. It doesn't ever seem to go more than 5",
"corkscrew. I have put a picture of 2 clogs below. I have tried",
"a sharpie marker to see if it's still being extruded. [](https://i.stack.imgur.com/qKNR5.jpg) I",
"ideas??? [](https://i.stack.imgur.com/hFkPM.jpg) Here is a picture of my heat tip. Note the",
"a 1 inch tube that goes from the heat element to the heat",
"am getting frequent clogs in my extruder. I've had this problem with 2",
"marker to see if it's still being extruded. [](https://i.stack.imgur.com/qKNR5.jpg) I think I",
"way to cool this 1 inch shaft between the heat sink and the",
"There is also no teflon tube inside the metal throat. [](https://i.stack.imgur.com/qKNR5.jpg) I think",
"melt. Any ideas??? [](https://i.stack.imgur.com/hFkPM.jpg) Here is a picture of my heat tip.",
"the head and gets soft in the tube because the tube is so",
"that (above the white arrow) is inside the heat sink. But 3/4 inches",
"me know if you've had the same problem with the extruder just clogging",
"seem to go more than 5 minutes before clogging. When it clogs, and",
"out of the heater. The top of that (above the white arrow) is",
"of 2 clogs below. I have tried using temperature of 220 all the",
"to the head. When the filament gets hot, it melts and bends and",
"with 2 different filaments from 2 different vendors. It will be print just",
"so with a sharpie marker to see if it's still being extruded. [](https://i.stack.imgur.com/hFkPM.jpg) Here is a picture of my",
"of it won't melt. Any ideas??? [](https://i.stack.imgur.com/hFkPM.jpg) Here is a picture of",
"shape like a corkscrew. I have put a picture of 2 clogs below.",
"out a solution... Take a look at the image below. There is a",
"black marks on the green filament below. That's just me marking every half",
"the white arrow) is inside the heat sink. But 3/4 inches of it",
"1 inch of tubing is REALLY hot and larger than 1.75mm. So, the",
"pay no attention to the black marks on the green filament below. That's",
"to the head and gets soft in the tube because the tube is",
"marks on the green filament below. That's just me marking every half inch",
"the extruder just clogging up and twisting the filament into a corkscrew shape.",
"twisting the filament into a corkscrew shape. By the way, pay no attention",
"the filament inside of it won't melt. Any ideas??? [](https://i.stack.imgur.com/hFkPM.jpg) Here is",
"and stops extruding. I am using an HIC PRUSA I3 printer with a",
"the heat sink. But 3/4 inches of it are bare and uncovered. There",
"prints the base layer GREAT on the 70 degree heated bed. No warping",
"using an HIC PRUSA I3 printer with a single extruder head. I've only",
"to go more than 5 minutes before clogging. When it clogs, and I",
"to figure out a solution... Take a look at the image below. There",
"down to 180 in increments of 5 degrees and seem to get the",
"3/4 inches of it are bare and uncovered. There is also no teflon",
"through that tube on its way to the head and gets soft in",
"the way, pay no attention to the black marks on the green filament",
"heat sink and the heated head so that the filament inside of it",
"clog up. It doesn't ever seem to go more than 5 minutes before",
"had the printer for a couple weeks. It had been printing fine with",
"being extruded. [](https://i.stack.imgur.com/qKNR5.jpg) I think I figured out the problem. Now, to",
"base layer GREAT on the 70 degree heated bed. No warping or peeling",
"just fine, then clog up. It doesn't ever seem to go more than",
"2 different filaments from 2 different vendors. It will be print just fine,",
"have tried using temperature of 220 all the way down to 180 in",
"ABS would peel up from the heated bed, so somebody suggested that I",
"So, the filament goes through that tube on its way to the head",
"increments of 5 degrees and seem to get the same result. it prints",
"stops extruding. I am using an HIC PRUSA I3 printer with a single",
"I've had this problem with 2 different filaments from 2 different vendors. It",
"and bends and curls which makes it NOT push itself into the heated",
"extruder head. I've only had the printer for a couple weeks. It had",
"the filament goes through that tube on its way to the head and",
"and am getting frequent clogs in my extruder. I've had this problem with",
"into the heated tip and out onto whatever I'm printing. The solution would",
"the ABS would peel up from the heated bed, so somebody suggested that",
"down to the head. When the filament gets hot, it melts and bends",
"PLA filament and am getting frequent clogs in my extruder. I've had this",
"just clogging up and twisting the filament into a corkscrew shape. By the",
"cools a bit). Please let me know if you've had the same problem",
"the heated tip and out onto whatever I'm printing. The solution would be",
"sticks really well and removes easily as well (once the bed cools a",
"same problem with the extruder just clogging up and twisting the filament into",
"look at the image below. There is a 1 inch tube that goes",
"I'm using brand new PLA filament and am getting frequent clogs in my",
"and removes easily as well (once the bed cools a bit). Please let",
"heat sink. This 1 inch of tubing is REALLY hot and larger than",
"It sticks really well and removes easily as well (once the bed cools",
"on its way to the head and gets soft in the tube because",
"a spiral (helix) shape like a corkscrew. I have put a picture of",
"fine with ABS, but the ABS would peel up from the heated bed,",
"up and twisting the filament into a corkscrew shape. By the way, pay",
"put a picture of 2 clogs below. I have tried using temperature of",
"(above the white arrow) is inside the heat sink. But 3/4 inches of",
"and uncovered. There is also no teflon tube inside the metal throat. [](https://i.stack.imgur.com/hFkPM.jpg) Here is a picture of my heat",
"heated bed. No warping or peeling off. However, after a few layers, it",
"Now, to figure out a solution... Take a look at the image below.",
"head. I've only had the printer for a couple weeks. It had been",
"AWESOME !! It sticks really well and removes easily as well (once the",
"on the 70 degree heated bed. No warping or peeling off. However, after",
"tube because the tube is so hot all the way down to the",
"the bed cools a bit). Please let me know if you've had the",
"inside of it won't melt. Any ideas??? [](https://i.stack.imgur.com/hFkPM.jpg) Here is a picture",
"its way to the head and gets soft in the tube because the",
"and hairspray. Hairspray is AWESOME !! It sticks really well and removes easily",
"tip and out onto whatever I'm printing. The solution would be to find",
"bed cools a bit). Please let me know if you've had the same",
"is REALLY hot and larger than 1.75mm. So, the filament goes through that",
"using temperature of 220 all the way down to 180 in increments of",
"a corkscrew shape. By the way, pay no attention to the black marks",
"the green filament below. That's just me marking every half inch or so",
"problem with the extruder just clogging up and twisting the filament into a",
"no teflon tube inside the metal throat. [](https://i.stack.imgur.com/i05Vo.png) [](https://i.stack.imgur.com/qKNR5.jpg) I think I figured out the problem. Now,",
"itself into the heated tip and out onto whatever I'm printing. The solution",
"goes from the heat element to the heat sink. This 1 inch of",
"tip. Note the shaft has about 1 inch sticking out of the heater.",
"no attention to the black marks on the green filament below. That's just",
"seem to get the same result. it prints the base layer GREAT on",
"melts and bends and curls which makes it NOT push itself into the",
"figure out a solution... Take a look at the image below. There is",
"that the filament inside of it won't melt. Any ideas??? [](https://i.stack.imgur.com/hFkPM.jpg) Here",
"off. However, after a few layers, it clogs up and stops extruding. I",
"always twisted in a spiral (helix) shape like a corkscrew. I have put",
"2 clogs below. I have tried using temperature of 220 all the way",
"teflon tube inside the metal throat. [](https://i.stack.imgur.com/i05Vo.png) [](https://i.stack.imgur.com/qKNR5.jpg) I think I figured out the problem. Now, to figure out a",
"the image below. There is a 1 inch tube that goes from the",
"problem with 2 different filaments from 2 different vendors. It will be print",
"my extruder. I've had this problem with 2 different filaments from 2 different",
"as well (once the bed cools a bit). Please let me know if",
"different filaments from 2 different vendors. It will be print just fine, then",
"of tubing is REALLY hot and larger than 1.75mm. So, the filament goes",
"top of that (above the white arrow) is inside the heat sink. But",
"is AWESOME !! It sticks really well and removes easily as well (once",
"But 3/4 inches of it are bare and uncovered. There is also no",
"problem. Now, to figure out a solution... Take a look at the image",
"well (once the bed cools a bit). Please let me know if you've",
"find some way to cool this 1 inch shaft between the heat sink",
"the heated head so that the filament inside of it won't melt. Any",
"makes it NOT push itself into the heated tip and out onto whatever",
"just me marking every half inch or so with a sharpie marker to",
"of my heat tip. Note the shaft has about 1 inch sticking out",
"extruding. I am using an HIC PRUSA I3 printer with a single extruder",
"so somebody suggested that I use PLA and hairspray. Hairspray is AWESOME !!",
"green filament below. That's just me marking every half inch or so with",
"the printer for a couple weeks. It had been printing fine with ABS,",
"bed. No warping or peeling off. However, after a few layers, it clogs",
"heat element to the heat sink. This 1 inch of tubing is REALLY",
"element to the heat sink. This 1 inch of tubing is REALLY hot",
"uncovered. There is also no teflon tube inside the metal throat. [](https://i.stack.imgur.com/qKNR5.jpg) I think I figured out the problem. Now, to figure out",
"220 all the way down to 180 in increments of 5 degrees and",
"the tube is so hot all the way down to the head. When",
"from the heated bed, so somebody suggested that I use PLA and hairspray.",
"spiral (helix) shape like a corkscrew. I have put a picture of 2",
"think I figured out the problem. Now, to figure out a solution... Take",
"about 1 inch sticking out of the heater. The top of that (above",
"and curls which makes it NOT push itself into the heated tip and",
"is always twisted in a spiral (helix) shape like a corkscrew. I have",
"tube on its way to the head and gets soft in the tube",
"shape. By the way, pay no attention to the black marks on the",
"out the filament, it is always twisted in a spiral (helix) shape like",
"curls which makes it NOT push itself into the heated tip and out",
"When the filament gets hot, it melts and bends and curls which makes",
"a picture of my heat tip. Note the shaft has about 1 inch",
"to the black marks on the green filament below. That's just me marking",
"onto whatever I'm printing. The solution would be to find some way to",
"!! It sticks really well and removes easily as well (once the bed",
"of 220 all the way down to 180 in increments of 5 degrees",
"below. I have tried using temperature of 220 all the way down to",
"printing fine with ABS, but the ABS would peel up from the heated",
"I have put a picture of 2 clogs below. I have tried using",
"than 1.75mm. So, the filament goes through that tube on its way to",
"an HIC PRUSA I3 printer with a single extruder head. I've only had",
"filament below. That's just me marking every half inch or so with a",
"marking every half inch or so with a sharpie marker to see if",
"it's still being extruded. [](https://i.stack.imgur.com/qKNR5.jpg) I think I figured out the problem.",
"heated tip and out onto whatever I'm printing. The solution would be to",
"up from the heated bed, so somebody suggested that I use PLA and",
"push itself into the heated tip and out onto whatever I'm printing. The",
"inch sticking out of the heater. The top of that (above the white",
"then clog up. It doesn't ever seem to go more than 5 minutes",
"image below. There is a 1 inch tube that goes from the heat",
"for a couple weeks. It had been printing fine with ABS, but the",
"layers, it clogs up and stops extruding. I am using an HIC PRUSA",
"a corkscrew. I have put a picture of 2 clogs below. I have",
"every half inch or so with a sharpie marker to see if it's",
"heat sink. But 3/4 inches of it are bare and uncovered. There is",
"this 1 inch shaft between the heat sink and the heated head so",
"it is always twisted in a spiral (helix) shape like a corkscrew. I",
"the way down to 180 in increments of 5 degrees and seem to",
"also no teflon tube inside the metal throat. [](https://i.stack.imgur.com/i05Vo.png) [](https://i.stack.imgur.com/qKNR5.jpg) I think I figured out the",
"and the heated head so that the filament inside of it won't melt.",
"it prints the base layer GREAT on the 70 degree heated bed. No",
"Take a look at the image below. There is a 1 inch tube",
"the heat element to the heat sink. This 1 inch of tubing is",
"solution... Take a look at the image below. There is a 1 inch",
"or peeling off. However, after a few layers, it clogs up and stops",
"print just fine, then clog up. It doesn't ever seem to go more",
"clogs up and stops extruding. I am using an HIC PRUSA I3 printer",
"few layers, it clogs up and stops extruding. I am using an HIC",
"single extruder head. I've only had the printer for a couple weeks. It",
"is inside the heat sink. But 3/4 inches of it are bare and",
"heat tip. Note the shaft has about 1 inch sticking out of the",
"between the heat sink and the heated head so that the filament inside",
"degrees and seem to get the same result. it prints the base layer",
"1 inch shaft between the heat sink and the heated head so that",
"of 5 degrees and seem to get the same result. it prints the",
"and larger than 1.75mm. So, the filament goes through that tube on its",
"I figured out the problem. Now, to figure out a solution... Take a",
"of the heater. The top of that (above the white arrow) is inside",
"before clogging. When it clogs, and I pull out the filament, it is",
"the way down to the head. When the filament gets hot, it melts",
"me marking every half inch or so with a sharpie marker to see",
"heated head so that the filament inside of it won't melt. Any ideas???",
"a couple weeks. It had been printing fine with ABS, but the ABS",
"GREAT on the 70 degree heated bed. No warping or peeling off. However,",
"see if it's still being extruded. [](https://i.stack.imgur.com/qKNR5.jpg) I think I figured out",
"solution would be to find some way to cool this 1 inch shaft",
"No warping or peeling off. However, after a few layers, it clogs up",
"layer GREAT on the 70 degree heated bed. No warping or peeling off.",
"to find some way to cool this 1 inch shaft between the heat",
"to the heat sink. This 1 inch of tubing is REALLY hot and",
"filament inside of it won't melt. Any ideas??? [](https://i.stack.imgur.com/hFkPM.jpg) Here is a",
"of that (above the white arrow) is inside the heat sink. But 3/4",
"only had the printer for a couple weeks. It had been printing fine",
"that goes from the heat element to the heat sink. This 1 inch",
"up and stops extruding. I am using an HIC PRUSA I3 printer with",
"bare and uncovered. There is also no teflon tube inside the metal throat.",
"1 inch tube that goes from the heat element to the heat sink.",
"It will be print just fine, then clog up. It doesn't ever seem",
"at the image below. There is a 1 inch tube that goes from",
"printer for a couple weeks. It had been printing fine with ABS, but",
"out the problem. Now, to figure out a solution... Take a look at",
"but the ABS would peel up from the heated bed, so somebody suggested",
"are bare and uncovered. There is also no teflon tube inside the metal",
"tube is so hot all the way down to the head. When the",
"so hot all the way down to the head. When the filament gets",
"to get the same result. it prints the base layer GREAT on the",
"temperature of 220 all the way down to 180 in increments of 5",
"(helix) shape like a corkscrew. I have put a picture of 2 clogs",
"gets soft in the tube because the tube is so hot all the",
"5 minutes before clogging. When it clogs, and I pull out the filament,",
"filament into a corkscrew shape. By the way, pay no attention to the",
"had been printing fine with ABS, but the ABS would peel up from",
"vendors. It will be print just fine, then clog up. It doesn't ever",
"180 in increments of 5 degrees and seem to get the same result.",
"if you've had the same problem with the extruder just clogging up and",
"heater. The top of that (above the white arrow) is inside the heat",
"I am using an HIC PRUSA I3 printer with a single extruder head.",
"clogs, and I pull out the filament, it is always twisted in a",
"It doesn't ever seem to go more than 5 minutes before clogging. When",
"doesn't ever seem to go more than 5 minutes before clogging. When it",
"the same result. it prints the base layer GREAT on the 70 degree",
"half inch or so with a sharpie marker to see if it's still",
"pull out the filament, it is always twisted in a spiral (helix) shape",
"70 degree heated bed. No warping or peeling off. However, after a few",
"well and removes easily as well (once the bed cools a bit). Please",
"soft in the tube because the tube is so hot all the way",
"goes through that tube on its way to the head and gets soft",
"will be print just fine, then clog up. It doesn't ever seem to",
"heated bed, so somebody suggested that I use PLA and hairspray. Hairspray is",
"Please let me know if you've had the same problem with the extruder",
"There is a 1 inch tube that goes from the heat element to",
"tube that goes from the heat element to the heat sink. This 1",
"a look at the image below. There is a 1 inch tube that",
"with a single extruder head. I've only had the printer for a couple",
"I pull out the filament, it is always twisted in a spiral (helix)",
"HIC PRUSA I3 printer with a single extruder head. I've only had the",
"inch tube that goes from the heat element to the heat sink. This",
"and out onto whatever I'm printing. The solution would be to find some",
"and I pull out the filament, it is always twisted in a spiral",
"the heated bed, so somebody suggested that I use PLA and hairspray. Hairspray"
] |
[
"one by one they break loose from the build plate. As they get",
"tiny they don't have much area in contact with the bed, so they",
"since I had gone to dinner it kept printing... see below. I think",
"with several settings, got it to come out pretty well. Thanks to all,",
"got it to come out pretty well. Thanks to all, esp. @Tormod! [](https://i.stack.imgur.com/gwngu.jpg)",
"support material layout? Oh, this is PLA, by the way. [](https://i.stack.imgur.com/d4sbr.jpg) (appending",
"a bunch of things, and the MeshMixer support, plus fiddling with several settings,",
"PLA, by the way. [](https://i.stack.imgur.com/d4sbr.jpg) (appending to question to be able to",
"settings, got it to come out pretty well. Thanks to all, esp. @Tormod!",
"poor support material geometry, but the controls in Slic3r for support material don't",
"support material geometry, but the controls in Slic3r for support material don't seem",
"to give many options. How can I get better support material layout? Oh,",
"support material don't seem to give many options. How can I get better",
"don't seem to give many options. How can I get better support material",
"needs support material. But Slic3r generates several dozen tiny support pillars, and one",
"course increases, and since they're so tiny they don't have much area in",
"in the picture) I tried a bunch of things, and the MeshMixer support,",
"flat bottom, so it needs support material. But Slic3r generates several dozen tiny",
"Eventually the whole model broke free, turned a bit, and since I had",
"several settings, got it to come out pretty well. Thanks to all, esp.",
"contact with the bed, so they separate. Eventually the whole model broke free,",
"since they're so tiny they don't have much area in contact with the",
"dinner it kept printing... see below. I think the main problem is the",
"controls in Slic3r for support material don't seem to give many options. How",
"main problem is the poor support material geometry, but the controls in Slic3r",
"tiny support pillars, and one by one they break loose from the build",
"question to be able to put in the picture) I tried a bunch",
"the picture) I tried a bunch of things, and the MeshMixer support, plus",
"the poor support material geometry, but the controls in Slic3r for support material",
"bit, and since I had gone to dinner it kept printing... see below.",
"to dinner it kept printing... see below. I think the main problem is",
"think the main problem is the poor support material geometry, but the controls",
"can I get better support material layout? Oh, this is PLA, by the",
"be able to put in the picture) I tried a bunch of things,",
"in contact with the bed, so they separate. Eventually the whole model broke",
"for a ship from the game \"Eve\". It doesn't have a flat bottom,",
"dozen tiny support pillars, and one by one they break loose from the",
"material. But Slic3r generates several dozen tiny support pillars, and one by one",
"support pillars, and one by one they break loose from the build plate.",
"plus fiddling with several settings, got it to come out pretty well. Thanks",
"bottom, so it needs support material. But Slic3r generates several dozen tiny support",
"they separate. Eventually the whole model broke free, turned a bit, and since",
"broke free, turned a bit, and since I had gone to dinner it",
"options. How can I get better support material layout? Oh, this is PLA,",
"to put in the picture) I tried a bunch of things, and the",
"much area in contact with the bed, so they separate. Eventually the whole",
"get tall, the leverage of course increases, and since they're so tiny they",
"several dozen tiny support pillars, and one by one they break loose from",
"pillars, and one by one they break loose from the build plate. As",
"with the bed, so they separate. Eventually the whole model broke free, turned",
"gone to dinner it kept printing... see below. I think the main problem",
"model for a ship from the game \"Eve\". It doesn't have a flat",
"and one by one they break loose from the build plate. As they",
"Oh, this is PLA, by the way. [](https://i.stack.imgur.com/d4sbr.jpg) (appending to question to",
"MeshMixer support, plus fiddling with several settings, got it to come out pretty",
"game \"Eve\". It doesn't have a flat bottom, so it needs support material.",
"it kept printing... see below. I think the main problem is the poor",
"it to come out pretty well. Thanks to all, esp. @Tormod! [](https://i.stack.imgur.com/d4sbr.jpg) (appending to question to be able",
"to come out pretty well. Thanks to all, esp. @Tormod! [](https://i.stack.imgur.com/d4sbr.jpg)",
"they don't have much area in contact with the bed, so they separate.",
"generates several dozen tiny support pillars, and one by one they break loose",
"have much area in contact with the bed, so they separate. Eventually the",
"see below. I think the main problem is the poor support material geometry,",
"by the way. [](https://i.stack.imgur.com/d4sbr.jpg) (appending to question to be able to put",
"the game \"Eve\". It doesn't have a flat bottom, so it needs support",
"so they separate. Eventually the whole model broke free, turned a bit, and",
"for support material don't seem to give many options. How can I get",
"support material. But Slic3r generates several dozen tiny support pillars, and one by",
"so it needs support material. But Slic3r generates several dozen tiny support pillars,",
"to question to be able to put in the picture) I tried a",
"problem is the poor support material geometry, but the controls in Slic3r for",
"free, turned a bit, and since I had gone to dinner it kept",
"the leverage of course increases, and since they're so tiny they don't have",
"layout? Oh, this is PLA, by the way. [](https://i.stack.imgur.com/d4sbr.jpg) (appending to question",
"I found a nice model for a ship from the game \"Eve\". It",
"bunch of things, and the MeshMixer support, plus fiddling with several settings, got",
"the main problem is the poor support material geometry, but the controls in",
"geometry, but the controls in Slic3r for support material don't seem to give",
"have a flat bottom, so it needs support material. But Slic3r generates several",
"and since I had gone to dinner it kept printing... see below. I",
"I had gone to dinner it kept printing... see below. I think the",
"the controls in Slic3r for support material don't seem to give many options.",
"things, and the MeshMixer support, plus fiddling with several settings, got it to",
"they're so tiny they don't have much area in contact with the bed,",
"they get tall, the leverage of course increases, and since they're so tiny",
"the whole model broke free, turned a bit, and since I had gone",
"whole model broke free, turned a bit, and since I had gone to",
"increases, and since they're so tiny they don't have much area in contact",
"in Slic3r for support material don't seem to give many options. How can",
"to be able to put in the picture) I tried a bunch of",
"had gone to dinner it kept printing... see below. I think the main",
"get better support material layout? Oh, this is PLA, by the way. [](https://i.stack.imgur.com/d4sbr.jpg) (appending to question to be able to put in the",
"break loose from the build plate. As they get tall, the leverage of",
"from the game \"Eve\". It doesn't have a flat bottom, so it needs",
"Slic3r generates several dozen tiny support pillars, and one by one they break",
"As they get tall, the leverage of course increases, and since they're so",
"(appending to question to be able to put in the picture) I tried",
"put in the picture) I tried a bunch of things, and the MeshMixer",
"seem to give many options. How can I get better support material layout?",
"loose from the build plate. As they get tall, the leverage of course",
"a bit, and since I had gone to dinner it kept printing... see",
"I get better support material layout? Oh, this is PLA, by the way.",
"I think the main problem is the poor support material geometry, but the",
"this is PLA, by the way. [](https://i.stack.imgur.com/d4sbr.jpg) (appending to question to be",
"so tiny they don't have much area in contact with the bed, so",
"I tried a bunch of things, and the MeshMixer support, plus fiddling with",
"give many options. How can I get better support material layout? Oh, this",
"build plate. As they get tall, the leverage of course increases, and since",
"\"Eve\". It doesn't have a flat bottom, so it needs support material. But",
"but the controls in Slic3r for support material don't seem to give many",
"fiddling with several settings, got it to come out pretty well. Thanks to",
"area in contact with the bed, so they separate. Eventually the whole model",
"printing... see below. I think the main problem is the poor support material",
"nice model for a ship from the game \"Eve\". It doesn't have a",
"turned a bit, and since I had gone to dinner it kept printing...",
"it needs support material. But Slic3r generates several dozen tiny support pillars, and",
"[](https://i.stack.imgur.com/d4sbr.jpg) (appending to question to be able to put in the picture)",
"by one they break loose from the build plate. As they get tall,",
"It doesn't have a flat bottom, so it needs support material. But Slic3r",
"from the build plate. As they get tall, the leverage of course increases,",
"bed, so they separate. Eventually the whole model broke free, turned a bit,",
"the way. [](https://i.stack.imgur.com/d4sbr.jpg) (appending to question to be able to put in",
"fail](https://i.stack.imgur.com/d4sbr.jpg)](https://i.stack.imgur.com/d4sbr.jpg) (appending to question to be able to put in the picture) I",
"the MeshMixer support, plus fiddling with several settings, got it to come out",
"the bed, so they separate. Eventually the whole model broke free, turned a",
"is the poor support material geometry, but the controls in Slic3r for support",
"below. I think the main problem is the poor support material geometry, but",
"a flat bottom, so it needs support material. But Slic3r generates several dozen",
"able to put in the picture) I tried a bunch of things, and",
"Slic3r for support material don't seem to give many options. How can I",
"a ship from the game \"Eve\". It doesn't have a flat bottom, so",
"material layout? Oh, this is PLA, by the way. [](https://i.stack.imgur.com/d4sbr.jpg) (appending to",
"model broke free, turned a bit, and since I had gone to dinner",
"How can I get better support material layout? Oh, this is PLA, by",
"kept printing... see below. I think the main problem is the poor support",
"found a nice model for a ship from the game \"Eve\". It doesn't",
"of things, and the MeshMixer support, plus fiddling with several settings, got it",
"one they break loose from the build plate. As they get tall, the",
"picture) I tried a bunch of things, and the MeshMixer support, plus fiddling",
"they break loose from the build plate. As they get tall, the leverage",
"and since they're so tiny they don't have much area in contact with",
"plate. As they get tall, the leverage of course increases, and since they're",
"But Slic3r generates several dozen tiny support pillars, and one by one they",
"material don't seem to give many options. How can I get better support"
] |
[
"got on the cheap from eBay. It works just fine. I bought a",
"Does anyone have good settings (Slic3r) to use with this stuff? Or any",
"(Slic3r) to use with this stuff? Or any other advice for getting a",
"- 78°C bed). Prints always either curl up from the bed after 5-20",
"various cooling fan settings. Does anyone have good settings (Slic3r) to use with",
"I have never had a print go well with it. I have tried",
"bed (180 - 220°C extruder, 50 - 78°C bed). Prints always either curl",
"extruder and bed (180 - 220°C extruder, 50 - 78°C bed). Prints always",
"50 - 78°C bed). Prints always either curl up from the bed after",
"roll of Hatchbox Silver PLA (1.75 mm) from Amazon. I have never had",
"printing with clear PLA that I got on the cheap from eBay. It",
"bed after 5-20 layers are deposited or delaminate in the middle of the",
"220°C extruder, 50 - 78°C bed). Prints always either curl up from the",
"Amazon. I have never had a print go well with it. I have",
"have also tried various cooling fan settings. Does anyone have good settings (Slic3r)",
"I print directly on the heated glass bed, and have also tried various",
"have good settings (Slic3r) to use with this stuff? Or any other advice",
"settings (Slic3r) to use with this stuff? Or any other advice for getting",
"It works just fine. I bought a roll of Hatchbox Silver PLA (1.75",
"I bought a roll of Hatchbox Silver PLA (1.75 mm) from Amazon. I",
"I have done the majority of my printing with clear PLA that I",
"78°C bed). Prints always either curl up from the bed after 5-20 layers",
"just fine. I bought a roll of Hatchbox Silver PLA (1.75 mm) from",
"middle of the print. I print directly on the heated glass bed, and",
"of the print. I print directly on the heated glass bed, and have",
"cooler extruder and bed (180 - 220°C extruder, 50 - 78°C bed). Prints",
"i2. I have done the majority of my printing with clear PLA that",
"(180 - 220°C extruder, 50 - 78°C bed). Prints always either curl up",
"bed, and have also tried various cooling fan settings. Does anyone have good",
"had a print go well with it. I have tried various combinations of",
"and have also tried various cooling fan settings. Does anyone have good settings",
"the bed after 5-20 layers are deposited or delaminate in the middle of",
"I have tried various combinations of hotter and cooler extruder and bed (180",
"either curl up from the bed after 5-20 layers are deposited or delaminate",
"and cooler extruder and bed (180 - 220°C extruder, 50 - 78°C bed).",
"curl up from the bed after 5-20 layers are deposited or delaminate in",
"or delaminate in the middle of the print. I print directly on the",
"always either curl up from the bed after 5-20 layers are deposited or",
"go well with it. I have tried various combinations of hotter and cooler",
"I got on the cheap from eBay. It works just fine. I bought",
"on the cheap from eBay. It works just fine. I bought a roll",
"the heated glass bed, and have also tried various cooling fan settings. Does",
"my printing with clear PLA that I got on the cheap from eBay.",
"majority of my printing with clear PLA that I got on the cheap",
"PLA that I got on the cheap from eBay. It works just fine.",
"have never had a print go well with it. I have tried various",
"eBay. It works just fine. I bought a roll of Hatchbox Silver PLA",
"on the heated glass bed, and have also tried various cooling fan settings.",
"bought a roll of Hatchbox Silver PLA (1.75 mm) from Amazon. I have",
"mm) from Amazon. I have never had a print go well with it.",
"with it. I have tried various combinations of hotter and cooler extruder and",
"with clear PLA that I got on the cheap from eBay. It works",
"are deposited or delaminate in the middle of the print. I print directly",
"a print go well with it. I have tried various combinations of hotter",
"fine. I bought a roll of Hatchbox Silver PLA (1.75 mm) from Amazon.",
"anyone have good settings (Slic3r) to use with this stuff? Or any other",
"of my printing with clear PLA that I got on the cheap from",
"also tried various cooling fan settings. Does anyone have good settings (Slic3r) to",
"from the bed after 5-20 layers are deposited or delaminate in the middle",
"have a RepRap Prusa i2. I have done the majority of my printing",
"combinations of hotter and cooler extruder and bed (180 - 220°C extruder, 50",
"have done the majority of my printing with clear PLA that I got",
"deposited or delaminate in the middle of the print. I print directly on",
"done the majority of my printing with clear PLA that I got on",
"and bed (180 - 220°C extruder, 50 - 78°C bed). Prints always either",
"(1.75 mm) from Amazon. I have never had a print go well with",
"the print. I print directly on the heated glass bed, and have also",
"up from the bed after 5-20 layers are deposited or delaminate in the",
"good settings (Slic3r) to use with this stuff? Or any other advice for",
"use with this stuff? Or any other advice for getting a successful print?",
"PLA (1.75 mm) from Amazon. I have never had a print go well",
"- 220°C extruder, 50 - 78°C bed). Prints always either curl up from",
"Prints always either curl up from the bed after 5-20 layers are deposited",
"bed). Prints always either curl up from the bed after 5-20 layers are",
"a roll of Hatchbox Silver PLA (1.75 mm) from Amazon. I have never",
"a RepRap Prusa i2. I have done the majority of my printing with",
"extruder, 50 - 78°C bed). Prints always either curl up from the bed",
"glass bed, and have also tried various cooling fan settings. Does anyone have",
"from eBay. It works just fine. I bought a roll of Hatchbox Silver",
"I have a RepRap Prusa i2. I have done the majority of my",
"Prusa i2. I have done the majority of my printing with clear PLA",
"from Amazon. I have never had a print go well with it. I",
"5-20 layers are deposited or delaminate in the middle of the print. I",
"directly on the heated glass bed, and have also tried various cooling fan",
"cooling fan settings. Does anyone have good settings (Slic3r) to use with this",
"tried various cooling fan settings. Does anyone have good settings (Slic3r) to use",
"cheap from eBay. It works just fine. I bought a roll of Hatchbox",
"delaminate in the middle of the print. I print directly on the heated",
"hotter and cooler extruder and bed (180 - 220°C extruder, 50 - 78°C",
"print go well with it. I have tried various combinations of hotter and",
"it. I have tried various combinations of hotter and cooler extruder and bed",
"fan settings. Does anyone have good settings (Slic3r) to use with this stuff?",
"print. I print directly on the heated glass bed, and have also tried",
"clear PLA that I got on the cheap from eBay. It works just",
"heated glass bed, and have also tried various cooling fan settings. Does anyone",
"print directly on the heated glass bed, and have also tried various cooling",
"never had a print go well with it. I have tried various combinations",
"Hatchbox Silver PLA (1.75 mm) from Amazon. I have never had a print",
"after 5-20 layers are deposited or delaminate in the middle of the print.",
"of hotter and cooler extruder and bed (180 - 220°C extruder, 50 -",
"works just fine. I bought a roll of Hatchbox Silver PLA (1.75 mm)",
"Silver PLA (1.75 mm) from Amazon. I have never had a print go",
"that I got on the cheap from eBay. It works just fine. I",
"of Hatchbox Silver PLA (1.75 mm) from Amazon. I have never had a",
"various combinations of hotter and cooler extruder and bed (180 - 220°C extruder,",
"well with it. I have tried various combinations of hotter and cooler extruder",
"settings. Does anyone have good settings (Slic3r) to use with this stuff? Or",
"in the middle of the print. I print directly on the heated glass",
"the middle of the print. I print directly on the heated glass bed,",
"to use with this stuff? Or any other advice for getting a successful",
"RepRap Prusa i2. I have done the majority of my printing with clear",
"tried various combinations of hotter and cooler extruder and bed (180 - 220°C",
"have tried various combinations of hotter and cooler extruder and bed (180 -",
"the majority of my printing with clear PLA that I got on the",
"layers are deposited or delaminate in the middle of the print. I print",
"the cheap from eBay. It works just fine. I bought a roll of"
] |
[
"I am printing at 40 mm/s and 0.2 mm layer height. If someone",
"am still getting some layer separation. I used 235 °C for the extruder",
"help with the warping some but I am still getting some layer separation.",
"with the warping some but I am still getting some layer separation. I",
"a lot of warping and delamination. I tried putting a large box over",
"a large box over the printer which did help with the warping some",
"putting a large box over the printer which did help with the warping",
"successfully printed in ABS using a Wanhao Duplicator i3. I have tried and",
"ABS using a Wanhao Duplicator i3. I have tried and get a lot",
"I have tried and get a lot of warping and delamination. I tried",
"I tried putting a large box over the printer which did help with",
"get a lot of warping and delamination. I tried putting a large box",
"tried putting a large box over the printer which did help with the",
"to others who have successfully printed in ABS using a Wanhao Duplicator i3.",
"getting some layer separation. I used 235 °C for the extruder and 100",
"mm layer height. If someone has ABS and PETG settings for this printer,",
"i3. I have tried and get a lot of warping and delamination. I",
"still getting some layer separation. I used 235 °C for the extruder and",
"of warping and delamination. I tried putting a large box over the printer",
"over the printer which did help with the warping some but I am",
"layer separation. I used 235 °C for the extruder and 100 °C for",
"and get a lot of warping and delamination. I tried putting a large",
"I am looking to others who have successfully printed in ABS using a",
"°C for the extruder and 100 °C for the bed. I am printing",
"printer which did help with the warping some but I am still getting",
"using a Wanhao Duplicator i3. I have tried and get a lot of",
"extruder and 100 °C for the bed. I am printing at 40 mm/s",
"for the extruder and 100 °C for the bed. I am printing at",
"a Wanhao Duplicator i3. I have tried and get a lot of warping",
"lot of warping and delamination. I tried putting a large box over the",
"°C for the bed. I am printing at 40 mm/s and 0.2 mm",
"has ABS and PETG settings for this printer, your help would be appreciated.",
"tried and get a lot of warping and delamination. I tried putting a",
"I am still getting some layer separation. I used 235 °C for the",
"have successfully printed in ABS using a Wanhao Duplicator i3. I have tried",
"at 40 mm/s and 0.2 mm layer height. If someone has ABS and",
"I used 235 °C for the extruder and 100 °C for the bed.",
"100 °C for the bed. I am printing at 40 mm/s and 0.2",
"in ABS using a Wanhao Duplicator i3. I have tried and get a",
"Wanhao Duplicator i3. I have tried and get a lot of warping and",
"If someone has ABS and PETG settings for this printer, your help would",
"used 235 °C for the extruder and 100 °C for the bed. I",
"warping some but I am still getting some layer separation. I used 235",
"which did help with the warping some but I am still getting some",
"height. If someone has ABS and PETG settings for this printer, your help",
"the bed. I am printing at 40 mm/s and 0.2 mm layer height.",
"box over the printer which did help with the warping some but I",
"40 mm/s and 0.2 mm layer height. If someone has ABS and PETG",
"the extruder and 100 °C for the bed. I am printing at 40",
"did help with the warping some but I am still getting some layer",
"printed in ABS using a Wanhao Duplicator i3. I have tried and get",
"the warping some but I am still getting some layer separation. I used",
"some layer separation. I used 235 °C for the extruder and 100 °C",
"and delamination. I tried putting a large box over the printer which did",
"printing at 40 mm/s and 0.2 mm layer height. If someone has ABS",
"warping and delamination. I tried putting a large box over the printer which",
"but I am still getting some layer separation. I used 235 °C for",
"who have successfully printed in ABS using a Wanhao Duplicator i3. I have",
"some but I am still getting some layer separation. I used 235 °C",
"and 0.2 mm layer height. If someone has ABS and PETG settings for",
"bed. I am printing at 40 mm/s and 0.2 mm layer height. If",
"mm/s and 0.2 mm layer height. If someone has ABS and PETG settings",
"0.2 mm layer height. If someone has ABS and PETG settings for this",
"235 °C for the extruder and 100 °C for the bed. I am",
"others who have successfully printed in ABS using a Wanhao Duplicator i3. I",
"have tried and get a lot of warping and delamination. I tried putting",
"looking to others who have successfully printed in ABS using a Wanhao Duplicator",
"the printer which did help with the warping some but I am still",
"Duplicator i3. I have tried and get a lot of warping and delamination.",
"delamination. I tried putting a large box over the printer which did help",
"separation. I used 235 °C for the extruder and 100 °C for the",
"someone has ABS and PETG settings for this printer, your help would be",
"layer height. If someone has ABS and PETG settings for this printer, your",
"am looking to others who have successfully printed in ABS using a Wanhao",
"and 100 °C for the bed. I am printing at 40 mm/s and",
"large box over the printer which did help with the warping some but",
"for the bed. I am printing at 40 mm/s and 0.2 mm layer",
"am printing at 40 mm/s and 0.2 mm layer height. If someone has"
] |
[
"+ hall sensor) end stops. Are there any differences in how exact they",
"there any differences in how exact they switch at the right location? If",
"and magnetic(magnet + hall sensor) end stops. Are there any differences in how",
"switch), optical and magnetic(magnet + hall sensor) end stops. Are there any differences",
"mechanical (micro switch), optical and magnetic(magnet + hall sensor) end stops. Are there",
"I have seen mechanical (micro switch), optical and magnetic(magnet + hall sensor) end",
"exact they switch at the right location? If so which are the most",
"optical and magnetic(magnet + hall sensor) end stops. Are there any differences in",
"differences in how exact they switch at the right location? If so which",
"any differences in how exact they switch at the right location? If so",
"seen mechanical (micro switch), optical and magnetic(magnet + hall sensor) end stops. Are",
"end stops. Are there any differences in how exact they switch at the",
"sensor) end stops. Are there any differences in how exact they switch at",
"stops. Are there any differences in how exact they switch at the right",
"Are there any differences in how exact they switch at the right location?",
"magnetic(magnet + hall sensor) end stops. Are there any differences in how exact",
"how exact they switch at the right location? If so which are the",
"they switch at the right location? If so which are the most precise?",
"hall sensor) end stops. Are there any differences in how exact they switch",
"(micro switch), optical and magnetic(magnet + hall sensor) end stops. Are there any",
"in how exact they switch at the right location? If so which are",
"have seen mechanical (micro switch), optical and magnetic(magnet + hall sensor) end stops."
] |
[
"in removing items from the bed. It seems to me like I'd want",
"have in removing items from the bed. It seems to me like I'd",
"design work from the things I'd like to make, but I have a",
"because of the difficulty some have in removing items from the bed. It",
"and printers? The reason I ask this is because of the difficulty some",
"software? Is this the same across slicers and printers? The reason I ask",
"corresponds to the origin (0,0,0) in slicer software? Is this the same across",
"printer and have started to do some preliminary design work from the things",
"is because of the difficulty some have in removing items from the bed.",
"but I have a question: Which corner of the print bed corresponds to",
"want to print small items closer to the front of the printer to",
"easier, but it looks like most slicer hosts only show a box representing",
"print small items closer to the front of the printer to make access",
"from the things I'd like to make, but I have a question: Which",
"this is because of the difficulty some have in removing items from the",
"preliminary design work from the things I'd like to make, but I have",
"to me like I'd want to print small items closer to the front",
"like I'd want to print small items closer to the front of the",
"to print small items closer to the front of the printer to make",
"it looks like most slicer hosts only show a box representing the build",
"buying a 3D printer and have started to do some preliminary design work",
"to the origin (0,0,0) in slicer software? Is this the same across slicers",
"the difficulty some have in removing items from the bed. It seems to",
"The reason I ask this is because of the difficulty some have in",
"slicer software? Is this the same across slicers and printers? The reason I",
"to do some preliminary design work from the things I'd like to make,",
"3D printer and have started to do some preliminary design work from the",
"am very close to buying a 3D printer and have started to do",
"of the print bed corresponds to the origin (0,0,0) in slicer software? Is",
"slicer hosts only show a box representing the build volume with no real",
"and have started to do some preliminary design work from the things I'd",
"Which corner of the print bed corresponds to the origin (0,0,0) in slicer",
"in slicer software? Is this the same across slicers and printers? The reason",
"only show a box representing the build volume with no real indication of",
"me like I'd want to print small items closer to the front of",
"question: Which corner of the print bed corresponds to the origin (0,0,0) in",
"I am very close to buying a 3D printer and have started to",
"make access easier, but it looks like most slicer hosts only show a",
"access easier, but it looks like most slicer hosts only show a box",
"items closer to the front of the printer to make access easier, but",
"printer to make access easier, but it looks like most slicer hosts only",
"to buying a 3D printer and have started to do some preliminary design",
"like most slicer hosts only show a box representing the build volume with",
"across slicers and printers? The reason I ask this is because of the",
"have started to do some preliminary design work from the things I'd like",
"work from the things I'd like to make, but I have a question:",
"origin (0,0,0) in slicer software? Is this the same across slicers and printers?",
"the same across slicers and printers? The reason I ask this is because",
"closer to the front of the printer to make access easier, but it",
"I'd like to make, but I have a question: Which corner of the",
"I have a question: Which corner of the print bed corresponds to the",
"removing items from the bed. It seems to me like I'd want to",
"looks like most slicer hosts only show a box representing the build volume",
"but it looks like most slicer hosts only show a box representing the",
"to make access easier, but it looks like most slicer hosts only show",
"of the difficulty some have in removing items from the bed. It seems",
"difficulty some have in removing items from the bed. It seems to me",
"some have in removing items from the bed. It seems to me like",
"front of the printer to make access easier, but it looks like most",
"printers? The reason I ask this is because of the difficulty some have",
"I'd want to print small items closer to the front of the printer",
"some preliminary design work from the things I'd like to make, but I",
"the printer to make access easier, but it looks like most slicer hosts",
"bed corresponds to the origin (0,0,0) in slicer software? Is this the same",
"a question: Which corner of the print bed corresponds to the origin (0,0,0)",
"It seems to me like I'd want to print small items closer to",
"to the front of the printer to make access easier, but it looks",
"bed. It seems to me like I'd want to print small items closer",
"like to make, but I have a question: Which corner of the print",
"small items closer to the front of the printer to make access easier,",
"most slicer hosts only show a box representing the build volume with no",
"this the same across slicers and printers? The reason I ask this is",
"print bed corresponds to the origin (0,0,0) in slicer software? Is this the",
"ask this is because of the difficulty some have in removing items from",
"of the printer to make access easier, but it looks like most slicer",
"the bed. It seems to me like I'd want to print small items",
"items from the bed. It seems to me like I'd want to print",
"a box representing the build volume with no real indication of what's \"front\".",
"very close to buying a 3D printer and have started to do some",
"the print bed corresponds to the origin (0,0,0) in slicer software? Is this",
"things I'd like to make, but I have a question: Which corner of",
"hosts only show a box representing the build volume with no real indication",
"a 3D printer and have started to do some preliminary design work from",
"slicers and printers? The reason I ask this is because of the difficulty",
"corner of the print bed corresponds to the origin (0,0,0) in slicer software?",
"started to do some preliminary design work from the things I'd like to",
"reason I ask this is because of the difficulty some have in removing",
"seems to me like I'd want to print small items closer to the",
"Is this the same across slicers and printers? The reason I ask this",
"same across slicers and printers? The reason I ask this is because of",
"from the bed. It seems to me like I'd want to print small",
"make, but I have a question: Which corner of the print bed corresponds",
"to make, but I have a question: Which corner of the print bed",
"the things I'd like to make, but I have a question: Which corner",
"(0,0,0) in slicer software? Is this the same across slicers and printers? The",
"close to buying a 3D printer and have started to do some preliminary",
"do some preliminary design work from the things I'd like to make, but",
"I ask this is because of the difficulty some have in removing items",
"the origin (0,0,0) in slicer software? Is this the same across slicers and",
"show a box representing the build volume with no real indication of what's",
"have a question: Which corner of the print bed corresponds to the origin",
"the front of the printer to make access easier, but it looks like"
] |
[
"are: 1. What glue is best for PLA plastic? 2. What glue is",
"best for ABS plastic? 3. Is there a glue that functions with both",
"On my 3d printer's (XYZ) retailer's site, it costs \\$20 (USD). Due to",
"a green tombow PITS adhesive stick. On Rakuten, it costs \\$1 (USD). On",
"to get a green tombow PITS adhesive stick. On Rakuten, it costs \\$1",
"my country, I need an alternative. I am currently using Davinci 1.0 for",
"my questions are: 1. What glue is best for PLA plastic? 2. What",
"get a green tombow PITS adhesive stick. On Rakuten, it costs \\$1 (USD).",
"glue is best for ABS plastic? 3. Is there a glue that functions",
"an alternative. I am currently using Davinci 1.0 for my bed, which I",
"1.0 for my bed, which I believe is a glass bed. So, my",
"that Rakuten does not ship to my country, I need an alternative. I",
"retailer's site, it costs \\$20 (USD). Due to the costs and the fact",
"site, it costs \\$20 (USD). Due to the costs and the fact that",
"costs and the fact that Rakuten does not ship to my country, I",
"\\$1 (USD). On my 3d printer's (XYZ) retailer's site, it costs \\$20 (USD).",
"I believe is a glass bed. So, my questions are: 1. What glue",
"\\$20 (USD). Due to the costs and the fact that Rakuten does not",
"tombow PITS adhesive stick. On Rakuten, it costs \\$1 (USD). On my 3d",
"is best for ABS plastic? 3. Is there a glue that functions with",
"PLA plastic? 2. What glue is best for ABS plastic? 3. Is there",
"bed, which I believe is a glass bed. So, my questions are: 1.",
"and the fact that Rakuten does not ship to my country, I need",
"I am currently using Davinci 1.0 for my bed, which I believe is",
"it costs \\$1 (USD). On my 3d printer's (XYZ) retailer's site, it costs",
"3d printer's (XYZ) retailer's site, it costs \\$20 (USD). Due to the costs",
"bed. So, my questions are: 1. What glue is best for PLA plastic?",
"believe is a glass bed. So, my questions are: 1. What glue is",
"(USD). Due to the costs and the fact that Rakuten does not ship",
"country, I need an alternative. I am currently using Davinci 1.0 for my",
"for ABS plastic? 3. Is there a glue that functions with both types",
"ship to my country, I need an alternative. I am currently using Davinci",
"currently using Davinci 1.0 for my bed, which I believe is a glass",
"Due to the costs and the fact that Rakuten does not ship to",
"I would like to get a green tombow PITS adhesive stick. On Rakuten,",
"my bed, which I believe is a glass bed. So, my questions are:",
"questions are: 1. What glue is best for PLA plastic? 2. What glue",
"to the costs and the fact that Rakuten does not ship to my",
"glass bed. So, my questions are: 1. What glue is best for PLA",
"What glue is best for PLA plastic? 2. What glue is best for",
"need an alternative. I am currently using Davinci 1.0 for my bed, which",
"(USD). On my 3d printer's (XYZ) retailer's site, it costs \\$20 (USD). Due",
"What glue is best for ABS plastic? 3. Is there a glue that",
"So, my questions are: 1. What glue is best for PLA plastic? 2.",
"for PLA plastic? 2. What glue is best for ABS plastic? 3. Is",
"glue is best for PLA plastic? 2. What glue is best for ABS",
"not ship to my country, I need an alternative. I am currently using",
"PITS adhesive stick. On Rakuten, it costs \\$1 (USD). On my 3d printer's",
"plastic? 2. What glue is best for ABS plastic? 3. Is there a",
"using Davinci 1.0 for my bed, which I believe is a glass bed.",
"I need an alternative. I am currently using Davinci 1.0 for my bed,",
"would like to get a green tombow PITS adhesive stick. On Rakuten, it",
"it costs \\$20 (USD). Due to the costs and the fact that Rakuten",
"1. What glue is best for PLA plastic? 2. What glue is best",
"like to get a green tombow PITS adhesive stick. On Rakuten, it costs",
"for my bed, which I believe is a glass bed. So, my questions",
"does not ship to my country, I need an alternative. I am currently",
"Rakuten, it costs \\$1 (USD). On my 3d printer's (XYZ) retailer's site, it",
"green tombow PITS adhesive stick. On Rakuten, it costs \\$1 (USD). On my",
"which I believe is a glass bed. So, my questions are: 1. What",
"the costs and the fact that Rakuten does not ship to my country,",
"is a glass bed. So, my questions are: 1. What glue is best",
"adhesive stick. On Rakuten, it costs \\$1 (USD). On my 3d printer's (XYZ)",
"fact that Rakuten does not ship to my country, I need an alternative.",
"Rakuten does not ship to my country, I need an alternative. I am",
"my 3d printer's (XYZ) retailer's site, it costs \\$20 (USD). Due to the",
"ABS plastic? 3. Is there a glue that functions with both types of",
"printer's (XYZ) retailer's site, it costs \\$20 (USD). Due to the costs and",
"to my country, I need an alternative. I am currently using Davinci 1.0",
"2. What glue is best for ABS plastic? 3. Is there a glue",
"best for PLA plastic? 2. What glue is best for ABS plastic? 3.",
"am currently using Davinci 1.0 for my bed, which I believe is a",
"alternative. I am currently using Davinci 1.0 for my bed, which I believe",
"costs \\$1 (USD). On my 3d printer's (XYZ) retailer's site, it costs \\$20",
"Davinci 1.0 for my bed, which I believe is a glass bed. So,",
"a glass bed. So, my questions are: 1. What glue is best for",
"On Rakuten, it costs \\$1 (USD). On my 3d printer's (XYZ) retailer's site,",
"stick. On Rakuten, it costs \\$1 (USD). On my 3d printer's (XYZ) retailer's",
"costs \\$20 (USD). Due to the costs and the fact that Rakuten does",
"is best for PLA plastic? 2. What glue is best for ABS plastic?",
"(XYZ) retailer's site, it costs \\$20 (USD). Due to the costs and the",
"the fact that Rakuten does not ship to my country, I need an",
"plastic? 3. Is there a glue that functions with both types of plastic?"
] |
[
"I can even turn the printer fan on/off, move the extruder, etc. through",
"even turn the printer fan on/off, move the extruder, etc. through OctoPrint: [](https://i.stack.imgur.com/qyeCZ.png) But when I press the blue \"Print button\", there is no",
"and Windows: [](https://i.stack.imgur.com/Kmil9.png) I've installed OctoPrint with the [M3D Fio",
"extruder, etc. through OctoPrint: [](https://i.stack.imgur.com/qyeCZ.png) But when I press the",
"fine and I can even turn the printer fan on/off, move the extruder,",
"the extruder, etc. through OctoPrint: [](https://i.stack.imgur.com/qyeCZ.png) But when I press",
"blue \"Print button\", there is no response. Also the files in the \"upload\"",
"the files in the \"upload\" section are greyed out. Must I download a",
"Also the files in the \"upload\" section are greyed out. Must I download",
"turn the printer fan on/off, move the extruder, etc. through OctoPrint: [. I can see the files in `~/.octoprint/` fine",
"files in `~/.octoprint/` fine and I can even turn the printer fan on/off,",
"[](https://i.stack.imgur.com/qyeCZ.png) But when I press the blue \"Print button\", there",
"to work with my Micro3D printer. The printer works fine on Mac and",
"[M3D Fio Plugin Manager](https://github.com/donovan6000/M3D-Fio). I can see the files in `~/.octoprint/` fine and",
"the printer fan on/off, move the extruder, etc. through OctoPrint: [](https://i.stack.imgur.com/Kmil9.png) I've",
"up [OctoPrint](http://octoprint.org/) on my Linux Ubuntu 16.04 desktop to work with my Micro3D",
"image description here](https://i.stack.imgur.com/Kmil9.png)](https://i.stack.imgur.com/Kmil9.png) I've installed OctoPrint with the [M3D Fio Plugin Manager](https://github.com/donovan6000/M3D-Fio). I",
"files in the \"upload\" section are greyed out. Must I download a slicing",
"through OctoPrint: [](https://i.stack.imgur.com/qyeCZ.png) But when I press the blue \"Print",
"my Linux Ubuntu 16.04 desktop to work with my Micro3D printer. The printer",
"Fio Plugin Manager](https://github.com/donovan6000/M3D-Fio). I can see the files in `~/.octoprint/` fine and I",
"etc. through OctoPrint: [](https://i.stack.imgur.com/qyeCZ.png) But when I press the blue",
"with my Micro3D printer. The printer works fine on Mac and Windows: [. I can see the files",
"section are greyed out. Must I download a slicing program or something? I'm",
"the \"upload\" section are greyed out. Must I download a slicing program or",
"I'm trying to set up [OctoPrint](http://octoprint.org/) on my Linux Ubuntu 16.04 desktop to",
"[](https://i.stack.imgur.com/Kmil9.png) I've installed OctoPrint with the [M3D Fio Plugin Manager](https://github.com/donovan6000/M3D-Fio).",
"is no response. Also the files in the \"upload\" section are greyed out.",
"trying to set up [OctoPrint](http://octoprint.org/) on my Linux Ubuntu 16.04 desktop to work",
"OctoPrint: [](https://i.stack.imgur.com/qyeCZ.png) But when I press the blue \"Print button\",",
"fine on Mac and Windows: [](https://i.stack.imgur.com/Kmil9.png) I've installed OctoPrint with",
"the blue \"Print button\", there is no response. Also the files in the",
"with the [M3D Fio Plugin Manager](https://github.com/donovan6000/M3D-Fio). I can see the files in `~/.octoprint/`",
"work with my Micro3D printer. The printer works fine on Mac and Windows:",
"move the extruder, etc. through OctoPrint: [](https://i.stack.imgur.com/qyeCZ.png) But when I",
"my Micro3D printer. The printer works fine on Mac and Windows: [](https://i.stack.imgur.com/Kmil9.png)",
"in the \"upload\" section are greyed out. Must I download a slicing program",
"a slicing program or something? I'm new with 3D printing in general but",
"are greyed out. Must I download a slicing program or something? I'm new",
"set up [OctoPrint](http://octoprint.org/) on my Linux Ubuntu 16.04 desktop to work with my",
"button\", there is no response. Also the files in the \"upload\" section are",
"I've installed OctoPrint with the [M3D Fio Plugin Manager](https://github.com/donovan6000/M3D-Fio). I can see the",
"image description here](https://i.stack.imgur.com/qyeCZ.png)](https://i.stack.imgur.com/qyeCZ.png) But when I press the blue \"Print button\", there is",
"no response. Also the files in the \"upload\" section are greyed out. Must",
"can even turn the printer fan on/off, move the extruder, etc. through OctoPrint:",
"Plugin Manager](https://github.com/donovan6000/M3D-Fio). I can see the files in `~/.octoprint/` fine and I can",
"on Mac and Windows: [](https://i.stack.imgur.com/Kmil9.png) I've installed OctoPrint with the",
"Manager](https://github.com/donovan6000/M3D-Fio). I can see the files in `~/.octoprint/` fine and I can even",
"and I can even turn the printer fan on/off, move the extruder, etc.",
"can see the files in `~/.octoprint/` fine and I can even turn the",
"`~/.octoprint/` fine and I can even turn the printer fan on/off, move the",
"press the blue \"Print button\", there is no response. Also the files in",
"out. Must I download a slicing program or something? I'm new with 3D",
"program or something? I'm new with 3D printing in general but not with",
"new with 3D printing in general but not with Linux. Grateful for help!",
"the files in `~/.octoprint/` fine and I can even turn the printer fan",
"I press the blue \"Print button\", there is no response. Also the files",
"greyed out. Must I download a slicing program or something? I'm new with",
"when I press the blue \"Print button\", there is no response. Also the",
"something? I'm new with 3D printing in general but not with Linux. Grateful",
"I can see the files in `~/.octoprint/` fine and I can even turn",
"see the files in `~/.octoprint/` fine and I can even turn the printer",
"there is no response. Also the files in the \"upload\" section are greyed",
"Windows: [](https://i.stack.imgur.com/Kmil9.png) I've installed OctoPrint with the [M3D Fio Plugin",
"here](https://i.stack.imgur.com/Kmil9.png)](https://i.stack.imgur.com/Kmil9.png) I've installed OctoPrint with the [M3D Fio Plugin Manager](https://github.com/donovan6000/M3D-Fio). I can see",
"printer works fine on Mac and Windows: [](https://i.stack.imgur.com/Kmil9.png) I've installed",
"on/off, move the extruder, etc. through OctoPrint: [](https://i.stack.imgur.com/qyeCZ.png) But when",
"printer fan on/off, move the extruder, etc. through OctoPrint: [](https://i.stack.imgur.com/qyeCZ.png)",
"to set up [OctoPrint](http://octoprint.org/) on my Linux Ubuntu 16.04 desktop to work with",
"in `~/.octoprint/` fine and I can even turn the printer fan on/off, move",
"[OctoPrint](http://octoprint.org/) on my Linux Ubuntu 16.04 desktop to work with my Micro3D printer.",
"fan on/off, move the extruder, etc. through OctoPrint: [](https://i.stack.imgur.com/qyeCZ.png) But",
"Ubuntu 16.04 desktop to work with my Micro3D printer. The printer works fine",
"works fine on Mac and Windows: [](https://i.stack.imgur.com/Kmil9.png) I've installed OctoPrint",
"But when I press the blue \"Print button\", there is no response. Also",
"Micro3D printer. The printer works fine on Mac and Windows: [](https://i.stack.imgur.com/Kmil9.png) I've installed OctoPrint with the [M3D Fio Plugin Manager](https://github.com/donovan6000/M3D-Fio). I can",
"I'm new with 3D printing in general but not with Linux. Grateful for",
"desktop to work with my Micro3D printer. The printer works fine on Mac",
"Mac and Windows: [](https://i.stack.imgur.com/Kmil9.png) I've installed OctoPrint with the [M3D",
"Must I download a slicing program or something? I'm new with 3D printing",
"OctoPrint with the [M3D Fio Plugin Manager](https://github.com/donovan6000/M3D-Fio). I can see the files in",
"or something? I'm new with 3D printing in general but not with Linux.",
"here](https://i.stack.imgur.com/qyeCZ.png)](https://i.stack.imgur.com/qyeCZ.png) But when I press the blue \"Print button\", there is no response.",
"\"Print button\", there is no response. Also the files in the \"upload\" section"
] |
[
"concern is a possible interference between the small magnetic field that is created",
"the magnet, and the sensor when probing the plate. I fear this question",
"P.S. I would also like to note, in case there is any relevance,",
"aluminum build plate (since aluminum is not magnetic). I would like to know",
"aluminum is not magnetic). I would like to know if anybody has attempted",
"if anybody has attempted this, and what the results were, as well as",
"plan on using a heated build plate, since I have a heated build",
"and steel washers glued to the bottom of the aluminum build plate (since",
"small magnetic field that is created by the magnet, and the sensor when",
"upgrade to auto bed-leveling using an inductive proximity sensor and an aluminum build",
"like to know if anybody has attempted this, and what the results were,",
"free to ask any follow up questions to details I may have missed.",
"on using a heated build plate, since I have a heated build chamber.",
"attempted this, and what the results were, as well as any issues incurred.",
"washers glued to the bottom of the aluminum build plate (since aluminum is",
"work. Please feel free to ask any follow up questions to details I",
"to know if anybody has attempted this, and what the results were, as",
"ask any follow up questions to details I may have missed. Thank you.",
"any relevance, I do not plan on using a heated build plate, since",
"sensor and an aluminum build plate on my Prusa i3. I also wanted",
"I also wanted to try to secure the build plate using neodymium magnets",
"a little open-ended, but I would just like to know if this could",
"Prusa i3. I also wanted to try to secure the build plate using",
"Thank you. P.S. I would also like to note, in case there is",
"is a possible interference between the small magnetic field that is created by",
"I would like to know if anybody has attempted this, and what the",
"plate (since aluminum is not magnetic). I would like to know if anybody",
"I would just like to know if this could work. Please feel free",
"Please feel free to ask any follow up questions to details I may",
"what the results were, as well as any issues incurred. My primary concern",
"details I may have missed. Thank you. P.S. I would also like to",
"this, and what the results were, as well as any issues incurred. My",
"bed-leveling using an inductive proximity sensor and an aluminum build plate on my",
"that is created by the magnet, and the sensor when probing the plate.",
"My primary concern is a possible interference between the small magnetic field that",
"(since aluminum is not magnetic). I would like to know if anybody has",
"to the bottom of the aluminum build plate (since aluminum is not magnetic).",
"any issues incurred. My primary concern is a possible interference between the small",
"case there is any relevance, I do not plan on using a heated",
"and what the results were, as well as any issues incurred. My primary",
"to details I may have missed. Thank you. P.S. I would also like",
"know if anybody has attempted this, and what the results were, as well",
"secured with bolts to the Y-carriage, and steel washers glued to the bottom",
"not magnetic). I would like to know if anybody has attempted this, and",
"primary concern is a possible interference between the small magnetic field that is",
"could work. Please feel free to ask any follow up questions to details",
"know if this could work. Please feel free to ask any follow up",
"magnet, and the sensor when probing the plate. I fear this question may",
"field that is created by the magnet, and the sensor when probing the",
"try to secure the build plate using neodymium magnets at 4 points, with",
"this could work. Please feel free to ask any follow up questions to",
"the aluminum build plate (since aluminum is not magnetic). I would like to",
"like to know if this could work. Please feel free to ask any",
"I would also like to note, in case there is any relevance, I",
"the small magnetic field that is created by the magnet, and the sensor",
"missed. Thank you. P.S. I would also like to note, in case there",
"my Prusa i3. I also wanted to try to secure the build plate",
"to ask any follow up questions to details I may have missed. Thank",
"up questions to details I may have missed. Thank you. P.S. I would",
"the results were, as well as any issues incurred. My primary concern is",
"and the sensor when probing the plate. I fear this question may sound",
"sound a little open-ended, but I would just like to know if this",
"magnets being secured with bolts to the Y-carriage, and steel washers glued to",
"not plan on using a heated build plate, since I have a heated",
"there is any relevance, I do not plan on using a heated build",
"to try to secure the build plate using neodymium magnets at 4 points,",
"i3. I also wanted to try to secure the build plate using neodymium",
"to auto bed-leveling using an inductive proximity sensor and an aluminum build plate",
"issues incurred. My primary concern is a possible interference between the small magnetic",
"note, in case there is any relevance, I do not plan on using",
"points, with the magnets being secured with bolts to the Y-carriage, and steel",
"on my Prusa i3. I also wanted to try to secure the build",
"at 4 points, with the magnets being secured with bolts to the Y-carriage,",
"little open-ended, but I would just like to know if this could work.",
"have missed. Thank you. P.S. I would also like to note, in case",
"incurred. My primary concern is a possible interference between the small magnetic field",
"do not plan on using a heated build plate, since I have a",
"plate using neodymium magnets at 4 points, with the magnets being secured with",
"just like to know if this could work. Please feel free to ask",
"inductive proximity sensor and an aluminum build plate on my Prusa i3. I",
"with the magnets being secured with bolts to the Y-carriage, and steel washers",
"follow up questions to details I may have missed. Thank you. P.S. I",
"created by the magnet, and the sensor when probing the plate. I fear",
"and an aluminum build plate on my Prusa i3. I also wanted to",
"to the Y-carriage, and steel washers glued to the bottom of the aluminum",
"results were, as well as any issues incurred. My primary concern is a",
"an aluminum build plate on my Prusa i3. I also wanted to try",
"plate. I fear this question may sound a little open-ended, but I would",
"I do not plan on using a heated build plate, since I have",
"to upgrade to auto bed-leveling using an inductive proximity sensor and an aluminum",
"but I would just like to know if this could work. Please feel",
"this question may sound a little open-ended, but I would just like to",
"to note, in case there is any relevance, I do not plan on",
"relevance, I do not plan on using a heated build plate, since I",
"secure the build plate using neodymium magnets at 4 points, with the magnets",
"plate on my Prusa i3. I also wanted to try to secure the",
"fear this question may sound a little open-ended, but I would just like",
"recently decided to upgrade to auto bed-leveling using an inductive proximity sensor and",
"may have missed. Thank you. P.S. I would also like to note, in",
"the magnets being secured with bolts to the Y-carriage, and steel washers glued",
"when probing the plate. I fear this question may sound a little open-ended,",
"as any issues incurred. My primary concern is a possible interference between the",
"open-ended, but I would just like to know if this could work. Please",
"has attempted this, and what the results were, as well as any issues",
"the Y-carriage, and steel washers glued to the bottom of the aluminum build",
"with bolts to the Y-carriage, and steel washers glued to the bottom of",
"between the small magnetic field that is created by the magnet, and the",
"magnetic). I would like to know if anybody has attempted this, and what",
"to secure the build plate using neodymium magnets at 4 points, with the",
"were, as well as any issues incurred. My primary concern is a possible",
"in case there is any relevance, I do not plan on using a",
"using an inductive proximity sensor and an aluminum build plate on my Prusa",
"aluminum build plate on my Prusa i3. I also wanted to try to",
"magnets at 4 points, with the magnets being secured with bolts to the",
"by the magnet, and the sensor when probing the plate. I fear this",
"may sound a little open-ended, but I would just like to know if",
"like to note, in case there is any relevance, I do not plan",
"the plate. I fear this question may sound a little open-ended, but I",
"glued to the bottom of the aluminum build plate (since aluminum is not",
"an inductive proximity sensor and an aluminum build plate on my Prusa i3.",
"build plate using neodymium magnets at 4 points, with the magnets being secured",
"I may have missed. Thank you. P.S. I would also like to note,",
"the build plate using neodymium magnets at 4 points, with the magnets being",
"is not magnetic). I would like to know if anybody has attempted this,",
"I fear this question may sound a little open-ended, but I would just",
"magnetic field that is created by the magnet, and the sensor when probing",
"of the aluminum build plate (since aluminum is not magnetic). I would like",
"you. P.S. I would also like to note, in case there is any",
"auto bed-leveling using an inductive proximity sensor and an aluminum build plate on",
"well as any issues incurred. My primary concern is a possible interference between",
"to know if this could work. Please feel free to ask any follow",
"is created by the magnet, and the sensor when probing the plate. I",
"anybody has attempted this, and what the results were, as well as any",
"the sensor when probing the plate. I fear this question may sound a",
"4 points, with the magnets being secured with bolts to the Y-carriage, and",
"would also like to note, in case there is any relevance, I do",
"steel washers glued to the bottom of the aluminum build plate (since aluminum",
"using neodymium magnets at 4 points, with the magnets being secured with bolts",
"bottom of the aluminum build plate (since aluminum is not magnetic). I would",
"possible interference between the small magnetic field that is created by the magnet,",
"the bottom of the aluminum build plate (since aluminum is not magnetic). I",
"as well as any issues incurred. My primary concern is a possible interference",
"would just like to know if this could work. Please feel free to",
"if this could work. Please feel free to ask any follow up questions",
"interference between the small magnetic field that is created by the magnet, and",
"probing the plate. I fear this question may sound a little open-ended, but",
"questions to details I may have missed. Thank you. P.S. I would also",
"Y-carriage, and steel washers glued to the bottom of the aluminum build plate",
"build plate on my Prusa i3. I also wanted to try to secure",
"feel free to ask any follow up questions to details I may have",
"also like to note, in case there is any relevance, I do not",
"bolts to the Y-carriage, and steel washers glued to the bottom of the",
"proximity sensor and an aluminum build plate on my Prusa i3. I also",
"wanted to try to secure the build plate using neodymium magnets at 4",
"question may sound a little open-ended, but I would just like to know",
"any follow up questions to details I may have missed. Thank you. P.S.",
"decided to upgrade to auto bed-leveling using an inductive proximity sensor and an",
"neodymium magnets at 4 points, with the magnets being secured with bolts to",
"being secured with bolts to the Y-carriage, and steel washers glued to the",
"also wanted to try to secure the build plate using neodymium magnets at",
"I recently decided to upgrade to auto bed-leveling using an inductive proximity sensor",
"build plate (since aluminum is not magnetic). I would like to know if",
"a possible interference between the small magnetic field that is created by the",
"would like to know if anybody has attempted this, and what the results",
"is any relevance, I do not plan on using a heated build plate,",
"sensor when probing the plate. I fear this question may sound a little"
] |
[
"the back of the printer towards the front. The extruded lines look uneven",
"hand side, while the right is okay. [](https://i.stack.imgur.com/MNLHp.jpg) I am thinking maybe the extruder tip is",
"lines](https://i.stack.imgur.com/MNLHp.jpg)](https://i.stack.imgur.com/MNLHp.jpg) I am thinking maybe the extruder tip is slanted (not perpendicular to",
"that shows this happen. The pieces were printed side by side, and both",
"area and only while the extruder moves in that direction. Here is a",
"moves in that direction. Here is a recent print that shows this happen.",
"surface is quite rough, but only in that area and only while the",
"look uneven and the surface is quite rough, but only in that area",
"seeing these strange artifacts when the extruder moves along one axis in one",
"of the printer towards the front. The extruded lines look uneven and the",
"perpendicular to the bed), which causes some sort of scraping while extruding? What",
"both of them show this on the left hand side, while the right",
"in that direction. Here is a recent print that shows this happen. The",
"the extruder moves in that direction. Here is a recent print that shows",
"these strange artifacts when the extruder moves along one axis in one direction",
"while the right is okay. [](https://i.stack.imgur.com/MNLHp.jpg) I am",
"uneven and the surface is quite rough, but only in that area and",
"side by side, and both of them show this on the left hand",
"direction. Here is a recent print that shows this happen. The pieces were",
"the print shows uneven and rough lines](https://i.stack.imgur.com/MNLHp.jpg)](https://i.stack.imgur.com/MNLHp.jpg) I am thinking maybe the extruder",
"rough, but only in that area and only while the extruder moves in",
"towards the front. The extruded lines look uneven and the surface is quite",
"back of the printer towards the front. The extruded lines look uneven and",
"extruder moves in that direction. Here is a recent print that shows this",
"show this on the left hand side, while the right is okay. [](https://i.stack.imgur.com/MNLHp.jpg) I am thinking",
"on the left hand side, while the right is okay. [](https://i.stack.imgur.com/MNLHp.jpg) I am thinking maybe the extruder tip",
"side, while the right is okay. [](https://i.stack.imgur.com/MNLHp.jpg) I am thinking maybe",
"I am seeing these strange artifacts when the extruder moves along one axis",
"The extruded lines look uneven and the surface is quite rough, but only",
"am thinking maybe the extruder tip is slanted (not perpendicular to the bed),",
"(not perpendicular to the bed), which causes some sort of scraping while extruding?",
"one axis in one direction - in particular from the back of the",
"the extruder moves along one axis in one direction - in particular from",
"by side, and both of them show this on the left hand side,",
"is okay. [](https://i.stack.imgur.com/MNLHp.jpg)",
"printer towards the front. The extruded lines look uneven and the surface is",
"slanted (not perpendicular to the bed), which causes some sort of scraping while",
"axis in one direction - in particular from the back of the printer",
"- in particular from the back of the printer towards the front. The",
"mostly happy with. However, I am seeing these strange artifacts when the extruder",
"and both of them show this on the left hand side, while the",
"the printer towards the front. The extruded lines look uneven and the surface",
"artifacts when the extruder moves along one axis in one direction - in",
"tip is slanted (not perpendicular to the bed), which causes some sort of",
"them show this on the left hand side, while the right is okay.",
"and the surface is quite rough, but only in that area and only",
"i3 that I am mostly happy with. However, I am seeing these strange",
"the extruder tip is slanted (not perpendicular to the bed), which causes some",
"okay. [](https://i.stack.imgur.com/MNLHp.jpg) I",
"from the back of the printer towards the front. The extruded lines look",
"of them show this on the left hand side, while the right is",
"The pieces were printed side by side, and both of them show this",
"a Prusa i3 that I am mostly happy with. However, I am seeing",
"uneven and rough lines](https://i.stack.imgur.com/MNLHp.jpg)](https://i.stack.imgur.com/MNLHp.jpg) I am thinking maybe the extruder tip is slanted",
"the right is okay. [](https://i.stack.imgur.com/MNLHp.jpg) I am thinking maybe the extruder tip is slanted (not perpendicular",
"lines look uneven and the surface is quite rough, but only in that",
"printed side by side, and both of them show this on the left",
"quite rough, but only in that area and only while the extruder moves",
"that direction. Here is a recent print that shows this happen. The pieces",
"happy with. However, I am seeing these strange artifacts when the extruder moves",
"thinking maybe the extruder tip is slanted (not perpendicular to the bed), which",
"but only in that area and only while the extruder moves in that",
"that I am mostly happy with. However, I am seeing these strange artifacts",
"this on the left hand side, while the right is okay. [](https://i.stack.imgur.com/MNLHp.jpg) I am thinking maybe the extruder tip is slanted (not",
"with. However, I am seeing these strange artifacts when the extruder moves along",
"of the print shows uneven and rough lines](https://i.stack.imgur.com/MNLHp.jpg)](https://i.stack.imgur.com/MNLHp.jpg) I am thinking maybe the",
"is slanted (not perpendicular to the bed), which causes some sort of scraping",
"that area and only while the extruder moves in that direction. Here is"
] |
[
"made of cellulose or other recyclable and bio-degradable material? Or do you know",
"the heavy use of glue. Is anywhere filament available, which is made of",
"do you know if research is going on in this area? edit: added",
"and glued. Like the ones [Staples](http://www.gizmag.com/staples-mcor-easy-3d-printing/25284/) has in their stores. But this sort",
"But this sort of paper isnt recyclable, because of the heavy use of",
"you know if research is going on in this area? edit: added bio-degradable",
"Or do you know if research is going on in this area? edit:",
"Is anywhere filament available, which is made of cellulose or other recyclable and",
"of papers are cut and glued. Like the ones [Staples](http://www.gizmag.com/staples-mcor-easy-3d-printing/25284/) has in their",
"stores. But this sort of paper isnt recyclable, because of the heavy use",
"where sheet of papers are cut and glued. Like the ones [Staples](http://www.gizmag.com/staples-mcor-easy-3d-printing/25284/) has",
"heavy use of glue. Is anywhere filament available, which is made of cellulose",
"of the heavy use of glue. Is anywhere filament available, which is made",
"Like the ones [Staples](http://www.gizmag.com/staples-mcor-easy-3d-printing/25284/) has in their stores. But this sort of paper",
"a 3d printing technique, where sheet of papers are cut and glued. Like",
"is a 3d printing technique, where sheet of papers are cut and glued.",
"cellulose or other recyclable and bio-degradable material? Or do you know if research",
"and bio-degradable material? Or do you know if research is going on in",
"available, which is made of cellulose or other recyclable and bio-degradable material? Or",
"filament available, which is made of cellulose or other recyclable and bio-degradable material?",
"the ones [Staples](http://www.gizmag.com/staples-mcor-easy-3d-printing/25284/) has in their stores. But this sort of paper isnt",
"recyclable and bio-degradable material? Or do you know if research is going on",
"cut and glued. Like the ones [Staples](http://www.gizmag.com/staples-mcor-easy-3d-printing/25284/) has in their stores. But this",
"anywhere filament available, which is made of cellulose or other recyclable and bio-degradable",
"papers are cut and glued. Like the ones [Staples](http://www.gizmag.com/staples-mcor-easy-3d-printing/25284/) has in their stores.",
"because of the heavy use of glue. Is anywhere filament available, which is",
"bio-degradable material? Or do you know if research is going on in this",
"of glue. Is anywhere filament available, which is made of cellulose or other",
"sort of paper isnt recyclable, because of the heavy use of glue. Is",
"printing technique, where sheet of papers are cut and glued. Like the ones",
"3d printing technique, where sheet of papers are cut and glued. Like the",
"know there is a 3d printing technique, where sheet of papers are cut",
"has in their stores. But this sort of paper isnt recyclable, because of",
"use of glue. Is anywhere filament available, which is made of cellulose or",
"there is a 3d printing technique, where sheet of papers are cut and",
"ones [Staples](http://www.gizmag.com/staples-mcor-easy-3d-printing/25284/) has in their stores. But this sort of paper isnt recyclable,",
"[Staples](http://www.gizmag.com/staples-mcor-easy-3d-printing/25284/) has in their stores. But this sort of paper isnt recyclable, because",
"glued. Like the ones [Staples](http://www.gizmag.com/staples-mcor-easy-3d-printing/25284/) has in their stores. But this sort of",
"are cut and glued. Like the ones [Staples](http://www.gizmag.com/staples-mcor-easy-3d-printing/25284/) has in their stores. But",
"other recyclable and bio-degradable material? Or do you know if research is going",
"paper isnt recyclable, because of the heavy use of glue. Is anywhere filament",
"is made of cellulose or other recyclable and bio-degradable material? Or do you",
"this sort of paper isnt recyclable, because of the heavy use of glue.",
"which is made of cellulose or other recyclable and bio-degradable material? Or do",
"technique, where sheet of papers are cut and glued. Like the ones [Staples](http://www.gizmag.com/staples-mcor-easy-3d-printing/25284/)",
"in their stores. But this sort of paper isnt recyclable, because of the",
"of paper isnt recyclable, because of the heavy use of glue. Is anywhere",
"recyclable, because of the heavy use of glue. Is anywhere filament available, which",
"glue. Is anywhere filament available, which is made of cellulose or other recyclable",
"material? Or do you know if research is going on in this area?",
"isnt recyclable, because of the heavy use of glue. Is anywhere filament available,",
"I know there is a 3d printing technique, where sheet of papers are",
"their stores. But this sort of paper isnt recyclable, because of the heavy",
"of cellulose or other recyclable and bio-degradable material? Or do you know if",
"sheet of papers are cut and glued. Like the ones [Staples](http://www.gizmag.com/staples-mcor-easy-3d-printing/25284/) has in",
"or other recyclable and bio-degradable material? Or do you know if research is"
] |
[
"wondering if anyone knows a good open source which they have used with",
"find any reliable open source project which I can get to work. [SLStudio](https://github.com/jakobwilm/slstudio)",
"structured light 3D scanner using single camera, light projector and a turntable. After",
"source project which I can get to work. [SLStudio](https://github.com/jakobwilm/slstudio) really seemed a good",
"reliable open source project which I can get to work. [SLStudio](https://github.com/jakobwilm/slstudio) really seemed",
"compile properly. I was wondering if anyone knows a good open source which",
"used with the same kind of setup? Any help would be really appreciated.",
"trying to make a structured light 3D scanner using single camera, light projector",
"I did not find any reliable open source project which I can get",
"work. [SLStudio](https://github.com/jakobwilm/slstudio) really seemed a good choice but did not compile properly. I",
"a good choice but did not compile properly. I was wondering if anyone",
"but did not compile properly. I was wondering if anyone knows a good",
"did not compile properly. I was wondering if anyone knows a good open",
"make a structured light 3D scanner using single camera, light projector and a",
"I am trying to make a structured light 3D scanner using single camera,",
"light projector and a turntable. After days on Google I did not find",
"good open source which they have used with the same kind of setup?",
"source which they have used with the same kind of setup? Any help",
"did not find any reliable open source project which I can get to",
"not find any reliable open source project which I can get to work.",
"a good open source which they have used with the same kind of",
"to make a structured light 3D scanner using single camera, light projector and",
"light 3D scanner using single camera, light projector and a turntable. After days",
"and a turntable. After days on Google I did not find any reliable",
"project which I can get to work. [SLStudio](https://github.com/jakobwilm/slstudio) really seemed a good choice",
"not compile properly. I was wondering if anyone knows a good open source",
"with the same kind of setup? Any help would be really appreciated. I",
"camera, light projector and a turntable. After days on Google I did not",
"to work. [SLStudio](https://github.com/jakobwilm/slstudio) really seemed a good choice but did not compile properly.",
"open source which they have used with the same kind of setup? Any",
"single camera, light projector and a turntable. After days on Google I did",
"[SLStudio](https://github.com/jakobwilm/slstudio) really seemed a good choice but did not compile properly. I was",
"which I can get to work. [SLStudio](https://github.com/jakobwilm/slstudio) really seemed a good choice but",
"using single camera, light projector and a turntable. After days on Google I",
"I can get to work. [SLStudio](https://github.com/jakobwilm/slstudio) really seemed a good choice but did",
"was wondering if anyone knows a good open source which they have used",
"kind of setup? Any help would be really appreciated. I am blocked here.",
"3D scanner using single camera, light projector and a turntable. After days on",
"open source project which I can get to work. [SLStudio](https://github.com/jakobwilm/slstudio) really seemed a",
"After days on Google I did not find any reliable open source project",
"which they have used with the same kind of setup? Any help would",
"am trying to make a structured light 3D scanner using single camera, light",
"days on Google I did not find any reliable open source project which",
"a turntable. After days on Google I did not find any reliable open",
"seemed a good choice but did not compile properly. I was wondering if",
"if anyone knows a good open source which they have used with the",
"can get to work. [SLStudio](https://github.com/jakobwilm/slstudio) really seemed a good choice but did not",
"anyone knows a good open source which they have used with the same",
"really seemed a good choice but did not compile properly. I was wondering",
"good choice but did not compile properly. I was wondering if anyone knows",
"properly. I was wondering if anyone knows a good open source which they",
"have used with the same kind of setup? Any help would be really",
"same kind of setup? Any help would be really appreciated. I am blocked",
"scanner using single camera, light projector and a turntable. After days on Google",
"a structured light 3D scanner using single camera, light projector and a turntable.",
"the same kind of setup? Any help would be really appreciated. I am",
"turntable. After days on Google I did not find any reliable open source",
"get to work. [SLStudio](https://github.com/jakobwilm/slstudio) really seemed a good choice but did not compile",
"I was wondering if anyone knows a good open source which they have",
"projector and a turntable. After days on Google I did not find any",
"knows a good open source which they have used with the same kind",
"choice but did not compile properly. I was wondering if anyone knows a",
"Google I did not find any reliable open source project which I can",
"on Google I did not find any reliable open source project which I",
"any reliable open source project which I can get to work. [SLStudio](https://github.com/jakobwilm/slstudio) really",
"they have used with the same kind of setup? Any help would be"
] |
[
"else has had the same experience for cross reference. What's the underlying issue?",
"same error occurred, I then swapped the other thermocouple and put it in",
"all. If I quickly go to monitor mode it shows tool 0 temperature",
"tech support but wanted to see if someone else has had the same",
"don't think that's the case. I'm on the phone with FlashForge's tech support",
"reference. What's the underlying issue? Is there a quick solution to this that",
"which made me think it was the thermocouple.On the motherboard I unplugged the",
"it in its place and got the same error except the tool 1",
"swapped the other thermocouple and put it in its place and got the",
"when putting it together but now I don't think that's the case. I'm",
"Tool 0 Failure! Temp limit reached Shutdown or restart. The front panel is",
"then swapped the other thermocouple and put it in its place and got",
"FlashForge's tech support but wanted to see if someone else has had the",
"If I quickly go to monitor mode it shows tool 0 temperature in",
"apart the extruders to change out the nozzles and thought I had possibly",
"smashed the wires when putting it together but now I don't think that's",
"showed \"NC\". I had recently taken apart the extruders to change out the",
"now I don't think that's the case. I'm on the phone with FlashForge's",
"had possibly smashed the wires when putting it together but now I don't",
"The front panel is not responsive and doesn't allow the printer to print",
"but now I don't think that's the case. I'm on the phone with",
"front panel is not responsive and doesn't allow the printer to print at",
"the other thermocouple and put it in its place and got the same",
"printing successfully for a while I received an error saying: Tool 0 Failure!",
"After printing successfully for a while I received an error saying: Tool 0",
"had recently taken apart the extruders to change out the nozzles and thought",
"was the thermocouple.On the motherboard I unplugged the thermocouple and the same error",
"and put it in its place and got the same error except the",
"limit reached Shutdown or restart. The front panel is not responsive and doesn't",
"taken apart the extruders to change out the nozzles and thought I had",
"I then swapped the other thermocouple and put it in its place and",
"solution to this that can get me printing right away (I'm under a",
"the phone with FlashForge's tech support but wanted to see if someone else",
"had the same experience for cross reference. What's the underlying issue? Is there",
"tool 0 temperature in the ~700°C range; which made me think it was",
"has had the same experience for cross reference. What's the underlying issue? Is",
"underlying issue? Is there a quick solution to this that can get me",
"Shutdown or restart. The front panel is not responsive and doesn't allow the",
"Is there a quick solution to this that can get me printing right",
"same error except the tool 1 temperature showed \"NC\". I had recently taken",
"error saying: Tool 0 Failure! Temp limit reached Shutdown or restart. The front",
"that can get me printing right away (I'm under a deadline)? What's the",
"think it was the thermocouple.On the motherboard I unplugged the thermocouple and the",
"or restart. The front panel is not responsive and doesn't allow the printer",
"range; which made me think it was the thermocouple.On the motherboard I unplugged",
"to change out the nozzles and thought I had possibly smashed the wires",
"unplugged the thermocouple and the same error occurred, I then swapped the other",
"same experience for cross reference. What's the underlying issue? Is there a quick",
"What's the underlying issue? Is there a quick solution to this that can",
"the same error except the tool 1 temperature showed \"NC\". I had recently",
"the motherboard I unplugged the thermocouple and the same error occurred, I then",
"the tool 1 temperature showed \"NC\". I had recently taken apart the extruders",
"to print at all. If I quickly go to monitor mode it shows",
"occurred, I then swapped the other thermocouple and put it in its place",
"the nozzles and thought I had possibly smashed the wires when putting it",
"made me think it was the thermocouple.On the motherboard I unplugged the thermocouple",
"thermocouple.On the motherboard I unplugged the thermocouple and the same error occurred, I",
"put it in its place and got the same error except the tool",
"I had possibly smashed the wires when putting it together but now I",
"a while I received an error saying: Tool 0 Failure! Temp limit reached",
"the wires when putting it together but now I don't think that's the",
"it shows tool 0 temperature in the ~700°C range; which made me think",
"I unplugged the thermocouple and the same error occurred, I then swapped the",
"mode it shows tool 0 temperature in the ~700°C range; which made me",
"the case. I'm on the phone with FlashForge's tech support but wanted to",
"get me printing right away (I'm under a deadline)? What's the end solution?",
"to this that can get me printing right away (I'm under a deadline)?",
"I quickly go to monitor mode it shows tool 0 temperature in the",
"nozzles and thought I had possibly smashed the wires when putting it together",
"the same experience for cross reference. What's the underlying issue? Is there a",
"and the same error occurred, I then swapped the other thermocouple and put",
"except the tool 1 temperature showed \"NC\". I had recently taken apart the",
"and doesn't allow the printer to print at all. If I quickly go",
"the same error occurred, I then swapped the other thermocouple and put it",
"1 temperature showed \"NC\". I had recently taken apart the extruders to change",
"for cross reference. What's the underlying issue? Is there a quick solution to",
"wanted to see if someone else has had the same experience for cross",
"I'm on the phone with FlashForge's tech support but wanted to see if",
"me think it was the thermocouple.On the motherboard I unplugged the thermocouple and",
"motherboard I unplugged the thermocouple and the same error occurred, I then swapped",
"I had recently taken apart the extruders to change out the nozzles and",
"in its place and got the same error except the tool 1 temperature",
"\"NC\". I had recently taken apart the extruders to change out the nozzles",
"error occurred, I then swapped the other thermocouple and put it in its",
"extruders to change out the nozzles and thought I had possibly smashed the",
"see if someone else has had the same experience for cross reference. What's",
"~700°C range; which made me think it was the thermocouple.On the motherboard I",
"if someone else has had the same experience for cross reference. What's the",
"place and got the same error except the tool 1 temperature showed \"NC\".",
"printer to print at all. If I quickly go to monitor mode it",
"go to monitor mode it shows tool 0 temperature in the ~700°C range;",
"thought I had possibly smashed the wires when putting it together but now",
"an error saying: Tool 0 Failure! Temp limit reached Shutdown or restart. The",
"reached Shutdown or restart. The front panel is not responsive and doesn't allow",
"Temp limit reached Shutdown or restart. The front panel is not responsive and",
"putting it together but now I don't think that's the case. I'm on",
"think that's the case. I'm on the phone with FlashForge's tech support but",
"0 Failure! Temp limit reached Shutdown or restart. The front panel is not",
"the printer to print at all. If I quickly go to monitor mode",
"panel is not responsive and doesn't allow the printer to print at all.",
"responsive and doesn't allow the printer to print at all. If I quickly",
"case. I'm on the phone with FlashForge's tech support but wanted to see",
"phone with FlashForge's tech support but wanted to see if someone else has",
"is not responsive and doesn't allow the printer to print at all. If",
"saying: Tool 0 Failure! Temp limit reached Shutdown or restart. The front panel",
"0 temperature in the ~700°C range; which made me think it was the",
"with FlashForge's tech support but wanted to see if someone else has had",
"someone else has had the same experience for cross reference. What's the underlying",
"the ~700°C range; which made me think it was the thermocouple.On the motherboard",
"I don't think that's the case. I'm on the phone with FlashForge's tech",
"cross reference. What's the underlying issue? Is there a quick solution to this",
"doesn't allow the printer to print at all. If I quickly go to",
"together but now I don't think that's the case. I'm on the phone",
"can get me printing right away (I'm under a deadline)? What's the end",
"shows tool 0 temperature in the ~700°C range; which made me think it",
"the extruders to change out the nozzles and thought I had possibly smashed",
"not responsive and doesn't allow the printer to print at all. If I",
"thermocouple and put it in its place and got the same error except",
"change out the nozzles and thought I had possibly smashed the wires when",
"thermocouple and the same error occurred, I then swapped the other thermocouple and",
"Failure! Temp limit reached Shutdown or restart. The front panel is not responsive",
"other thermocouple and put it in its place and got the same error",
"that's the case. I'm on the phone with FlashForge's tech support but wanted",
"this that can get me printing right away (I'm under a deadline)? What's",
"its place and got the same error except the tool 1 temperature showed",
"the thermocouple.On the motherboard I unplugged the thermocouple and the same error occurred,",
"got the same error except the tool 1 temperature showed \"NC\". I had",
"on the phone with FlashForge's tech support but wanted to see if someone",
"out the nozzles and thought I had possibly smashed the wires when putting",
"a quick solution to this that can get me printing right away (I'm",
"it together but now I don't think that's the case. I'm on the",
"possibly smashed the wires when putting it together but now I don't think",
"and thought I had possibly smashed the wires when putting it together but",
"received an error saying: Tool 0 Failure! Temp limit reached Shutdown or restart.",
"successfully for a while I received an error saying: Tool 0 Failure! Temp",
"I received an error saying: Tool 0 Failure! Temp limit reached Shutdown or",
"print at all. If I quickly go to monitor mode it shows tool",
"issue? Is there a quick solution to this that can get me printing",
"error except the tool 1 temperature showed \"NC\". I had recently taken apart",
"allow the printer to print at all. If I quickly go to monitor",
"temperature in the ~700°C range; which made me think it was the thermocouple.On",
"monitor mode it shows tool 0 temperature in the ~700°C range; which made",
"to see if someone else has had the same experience for cross reference.",
"tool 1 temperature showed \"NC\". I had recently taken apart the extruders to",
"it was the thermocouple.On the motherboard I unplugged the thermocouple and the same",
"recently taken apart the extruders to change out the nozzles and thought I",
"restart. The front panel is not responsive and doesn't allow the printer to",
"quick solution to this that can get me printing right away (I'm under",
"while I received an error saying: Tool 0 Failure! Temp limit reached Shutdown",
"to monitor mode it shows tool 0 temperature in the ~700°C range; which",
"experience for cross reference. What's the underlying issue? Is there a quick solution",
"support but wanted to see if someone else has had the same experience",
"wires when putting it together but now I don't think that's the case.",
"at all. If I quickly go to monitor mode it shows tool 0",
"the underlying issue? Is there a quick solution to this that can get",
"the thermocouple and the same error occurred, I then swapped the other thermocouple",
"and got the same error except the tool 1 temperature showed \"NC\". I",
"temperature showed \"NC\". I had recently taken apart the extruders to change out",
"there a quick solution to this that can get me printing right away",
"quickly go to monitor mode it shows tool 0 temperature in the ~700°C",
"but wanted to see if someone else has had the same experience for",
"in the ~700°C range; which made me think it was the thermocouple.On the",
"for a while I received an error saying: Tool 0 Failure! Temp limit"
] |
[
"a steel print bed made so it would tend to stay flat. Has",
"of my print bed is warped down. I am thinking about having a",
"Flashforge Creator Dual. One corner of my print bed is warped down. I",
"print bed is warped down. I am thinking about having a steel print",
"print bed made so it would tend to stay flat. Has anyone tried",
"am thinking about having a steel print bed made so it would tend",
"having a steel print bed made so it would tend to stay flat.",
"is warped down. I am thinking about having a steel print bed made",
"a Flashforge Creator Dual. One corner of my print bed is warped down.",
"down. I am thinking about having a steel print bed made so it",
"Dual. One corner of my print bed is warped down. I am thinking",
"thinking about having a steel print bed made so it would tend to",
"One corner of my print bed is warped down. I am thinking about",
"have a Flashforge Creator Dual. One corner of my print bed is warped",
"bed is warped down. I am thinking about having a steel print bed",
"about having a steel print bed made so it would tend to stay",
"warped down. I am thinking about having a steel print bed made so",
"Creator Dual. One corner of my print bed is warped down. I am",
"steel print bed made so it would tend to stay flat. Has anyone",
"I have a Flashforge Creator Dual. One corner of my print bed is",
"my print bed is warped down. I am thinking about having a steel",
"corner of my print bed is warped down. I am thinking about having",
"bed made so it would tend to stay flat. Has anyone tried this?",
"I am thinking about having a steel print bed made so it would"
] |
[
"would like to print from one material in two colors or from different",
"new printer with dual extruder. Is there some way how to measure and/or",
"to create 3d model - ask the seller(s) to print it - and",
"use Prosi i3 with one extruder for some years and I would like",
"with dual extruder on the market? For example to create 3d model -",
"dual extruder on the market? For example to create 3d model - ask",
"For example to create 3d model - ask the seller(s) to print it",
"some way how to measure and/or compare quality of printers with dual extruder",
"material in two colors or from different materials for one model. Therefore I'm",
"printer with dual extruder. Is there some way how to measure and/or compare",
"printers with dual extruder on the market? For example to create 3d model",
"on the market? For example to create 3d model - ask the seller(s)",
"market? For example to create 3d model - ask the seller(s) to print",
"example to create 3d model - ask the seller(s) to print it -",
"there some way how to measure and/or compare quality of printers with dual",
"seller(s) to print it - and then compare? - what details to focus",
"one model. Therefore I'm lookig for new printer with dual extruder. Is there",
"and/or compare quality of printers with dual extruder on the market? For example",
"in two colors or from different materials for one model. Therefore I'm lookig",
"years and I would like to print from one material in two colors",
"of printers with dual extruder on the market? For example to create 3d",
"I would like to print from one material in two colors or from",
"some years and I would like to print from one material in two",
"3d model - ask the seller(s) to print it - and then compare?",
"one material in two colors or from different materials for one model. Therefore",
"extruder for some years and I would like to print from one material",
"materials for one model. Therefore I'm lookig for new printer with dual extruder.",
"the seller(s) to print it - and then compare? - what details to",
"compare quality of printers with dual extruder on the market? For example to",
"I use Prosi i3 with one extruder for some years and I would",
"with one extruder for some years and I would like to print from",
"for new printer with dual extruder. Is there some way how to measure",
"for some years and I would like to print from one material in",
"model. Therefore I'm lookig for new printer with dual extruder. Is there some",
"the market? For example to create 3d model - ask the seller(s) to",
"model - ask the seller(s) to print it - and then compare? -",
"ask the seller(s) to print it - and then compare? - what details",
"dual extruder. Is there some way how to measure and/or compare quality of",
"from different materials for one model. Therefore I'm lookig for new printer with",
"for one model. Therefore I'm lookig for new printer with dual extruder. Is",
"to print it - and then compare? - what details to focus on?",
"two colors or from different materials for one model. Therefore I'm lookig for",
"or from different materials for one model. Therefore I'm lookig for new printer",
"different materials for one model. Therefore I'm lookig for new printer with dual",
"lookig for new printer with dual extruder. Is there some way how to",
"to print from one material in two colors or from different materials for",
"with dual extruder. Is there some way how to measure and/or compare quality",
"i3 with one extruder for some years and I would like to print",
"print from one material in two colors or from different materials for one",
"and I would like to print from one material in two colors or",
"quality of printers with dual extruder on the market? For example to create",
"- ask the seller(s) to print it - and then compare? - what",
"way how to measure and/or compare quality of printers with dual extruder on",
"colors or from different materials for one model. Therefore I'm lookig for new",
"Prosi i3 with one extruder for some years and I would like to",
"Therefore I'm lookig for new printer with dual extruder. Is there some way",
"measure and/or compare quality of printers with dual extruder on the market? For",
"one extruder for some years and I would like to print from one",
"like to print from one material in two colors or from different materials",
"I'm lookig for new printer with dual extruder. Is there some way how",
"create 3d model - ask the seller(s) to print it - and then",
"extruder. Is there some way how to measure and/or compare quality of printers",
"extruder on the market? For example to create 3d model - ask the",
"from one material in two colors or from different materials for one model.",
"how to measure and/or compare quality of printers with dual extruder on the",
"to measure and/or compare quality of printers with dual extruder on the market?",
"Is there some way how to measure and/or compare quality of printers with"
] |
[
"model rendered with Blender: [](https://i.stack.imgur.com/N1cVF.png) If I throw it at",
"Blender: [](https://i.stack.imgur.com/N1cVF.png) If I throw it at a commercial printing",
"I throw it at a commercial printing shoppe, is it going to be",
"my first project, so I'm trying to decide if I'm getting in over",
"to decide if I'm getting in over my head. Here's the model rendered",
"Here's the model rendered with Blender: [](https://i.stack.imgur.com/N1cVF.png) If I throw",
"printing shoppe, is it going to be fairly straight forward? Or is it",
"a commercial printing shoppe, is it going to be fairly straight forward? Or",
"3D model that I'd like to print. This is my first project, so",
"here](https://i.stack.imgur.com/N1cVF.png)](https://i.stack.imgur.com/N1cVF.png) If I throw it at a commercial printing shoppe, is it going",
"so I'm trying to decide if I'm getting in over my head. Here's",
"I have a 3D model that I'd like to print. This is my",
"This is my first project, so I'm trying to decide if I'm getting",
"like to print. This is my first project, so I'm trying to decide",
"the model rendered with Blender: [](https://i.stack.imgur.com/N1cVF.png) If I throw it",
"at a commercial printing shoppe, is it going to be fairly straight forward?",
"if I'm getting in over my head. Here's the model rendered with Blender:",
"is it unlikely to be able to get the colours fitting together like",
"in over my head. Here's the model rendered with Blender: [](https://i.stack.imgur.com/N1cVF.png) If I throw it at a commercial printing shoppe,",
"is it going to be fairly straight forward? Or is it unlikely to",
"image description here](https://i.stack.imgur.com/N1cVF.png)](https://i.stack.imgur.com/N1cVF.png) If I throw it at a commercial printing shoppe, is",
"description here](https://i.stack.imgur.com/N1cVF.png)](https://i.stack.imgur.com/N1cVF.png) If I throw it at a commercial printing shoppe, is it",
"it at a commercial printing shoppe, is it going to be fairly straight",
"going to be fairly straight forward? Or is it unlikely to be able",
"be fairly straight forward? Or is it unlikely to be able to get",
"to be able to get the colours fitting together like this to work",
"decide if I'm getting in over my head. Here's the model rendered with",
"over my head. Here's the model rendered with Blender: [](https://i.stack.imgur.com/N1cVF.png)",
"I'm trying to decide if I'm getting in over my head. Here's the",
"my head. Here's the model rendered with Blender: [](https://i.stack.imgur.com/N1cVF.png) If",
"first project, so I'm trying to decide if I'm getting in over my",
"it going to be fairly straight forward? Or is it unlikely to be",
"I'd like to print. This is my first project, so I'm trying to",
"to be fairly straight forward? Or is it unlikely to be able to",
"rendered with Blender: [](https://i.stack.imgur.com/N1cVF.png) If I throw it at a",
"Or is it unlikely to be able to get the colours fitting together",
"be able to get the colours fitting together like this to work well?",
"commercial printing shoppe, is it going to be fairly straight forward? Or is",
"that I'd like to print. This is my first project, so I'm trying",
"trying to decide if I'm getting in over my head. Here's the model",
"fairly straight forward? Or is it unlikely to be able to get the",
"shoppe, is it going to be fairly straight forward? Or is it unlikely",
"print. This is my first project, so I'm trying to decide if I'm",
"I'm getting in over my head. Here's the model rendered with Blender: [](https://i.stack.imgur.com/N1cVF.png) If I throw it at a commercial",
"forward? Or is it unlikely to be able to get the colours fitting",
"project, so I'm trying to decide if I'm getting in over my head.",
"model that I'd like to print. This is my first project, so I'm",
"to print. This is my first project, so I'm trying to decide if",
"is my first project, so I'm trying to decide if I'm getting in",
"straight forward? Or is it unlikely to be able to get the colours",
"have a 3D model that I'd like to print. This is my first",
"If I throw it at a commercial printing shoppe, is it going to",
"head. Here's the model rendered with Blender: [](https://i.stack.imgur.com/N1cVF.png) If I",
"unlikely to be able to get the colours fitting together like this to",
"throw it at a commercial printing shoppe, is it going to be fairly",
"it unlikely to be able to get the colours fitting together like this"
] |
[
"corners of the bottom bent up, making the whole base rock when set",
"of the bottom bent up, making the whole base rock when set on",
"the corners of the bottom bent up, making the whole base rock when",
"the bottom bent up, making the whole base rock when set on a",
"for a model, but the corners of the bottom bent up, making the",
"the whole base rock when set on a table. Is there a quick",
"base for a model, but the corners of the bottom bent up, making",
"set on a table. Is there a quick fix for a makerbot2 without",
"rock when set on a table. Is there a quick fix for a",
"but the corners of the bottom bent up, making the whole base rock",
"on a table. Is there a quick fix for a makerbot2 without a",
"whole base rock when set on a table. Is there a quick fix",
"a big base for a model, but the corners of the bottom bent",
"a table. Is there a quick fix for a makerbot2 without a heated",
"base rock when set on a table. Is there a quick fix for",
"table. Is there a quick fix for a makerbot2 without a heated plate?",
"I printed a big base for a model, but the corners of the",
"when set on a table. Is there a quick fix for a makerbot2",
"big base for a model, but the corners of the bottom bent up,",
"making the whole base rock when set on a table. Is there a",
"up, making the whole base rock when set on a table. Is there",
"bottom bent up, making the whole base rock when set on a table.",
"model, but the corners of the bottom bent up, making the whole base",
"printed a big base for a model, but the corners of the bottom",
"bent up, making the whole base rock when set on a table. Is",
"a model, but the corners of the bottom bent up, making the whole"
] |
[
"I know that the SLS 3D printer stands for selective laser sintering,where as",
"laser sintering,where as DMLS stands for direct metal laser sintering. I want to",
"know that the SLS 3D printer stands for selective laser sintering,where as DMLS",
"SLS 3D printer stands for selective laser sintering,where as DMLS stands for direct",
"want to know that,can i convert SLS 3D printer to DMLS. By just",
"laser sintering. I want to know that,can i convert SLS 3D printer to",
"know that,can i convert SLS 3D printer to DMLS. By just changing powder(or",
"metal laser sintering. I want to know that,can i convert SLS 3D printer",
"DMLS stands for direct metal laser sintering. I want to know that,can i",
"3D printer stands for selective laser sintering,where as DMLS stands for direct metal",
"that,can i convert SLS 3D printer to DMLS. By just changing powder(or another",
"the SLS 3D printer stands for selective laser sintering,where as DMLS stands for",
"stands for direct metal laser sintering. I want to know that,can i convert",
"direct metal laser sintering. I want to know that,can i convert SLS 3D",
"for direct metal laser sintering. I want to know that,can i convert SLS",
"that the SLS 3D printer stands for selective laser sintering,where as DMLS stands",
"for selective laser sintering,where as DMLS stands for direct metal laser sintering. I",
"sintering. I want to know that,can i convert SLS 3D printer to DMLS.",
"as DMLS stands for direct metal laser sintering. I want to know that,can",
"i convert SLS 3D printer to DMLS. By just changing powder(or another way?)",
"printer stands for selective laser sintering,where as DMLS stands for direct metal laser",
"to know that,can i convert SLS 3D printer to DMLS. By just changing",
"stands for selective laser sintering,where as DMLS stands for direct metal laser sintering.",
"sintering,where as DMLS stands for direct metal laser sintering. I want to know",
"selective laser sintering,where as DMLS stands for direct metal laser sintering. I want",
"I want to know that,can i convert SLS 3D printer to DMLS. By"
] |
[
"v6 hotend and I am installing it on the open source design of",
"I am installing it on the open source design of a Prusa i3.",
"do I clean my hotend after each print and after using different filaments?",
"Prusa i3. How do I clean my hotend after each print and after",
"on the open source design of a Prusa i3. How do I clean",
"i3. How do I clean my hotend after each print and after using",
"design of a Prusa i3. How do I clean my hotend after each",
"of a Prusa i3. How do I clean my hotend after each print",
"hotend and I am installing it on the open source design of a",
"open source design of a Prusa i3. How do I clean my hotend",
"installing it on the open source design of a Prusa i3. How do",
"just received my E3D v6 hotend and I am installing it on the",
"How do I clean my hotend after each print and after using different",
"source design of a Prusa i3. How do I clean my hotend after",
"a Prusa i3. How do I clean my hotend after each print and",
"and I am installing it on the open source design of a Prusa",
"E3D v6 hotend and I am installing it on the open source design",
"the open source design of a Prusa i3. How do I clean my",
"I just received my E3D v6 hotend and I am installing it on",
"it on the open source design of a Prusa i3. How do I",
"my E3D v6 hotend and I am installing it on the open source",
"received my E3D v6 hotend and I am installing it on the open",
"am installing it on the open source design of a Prusa i3. How"
] |
[
"at this temperature will increase wear on the thermistor and increase my chances",
"I have a FlashForge CreatorX (MakerBot clone) that's been working fine for about",
"thermistor and increase my chances of clogging PLA in the gear (an issue",
"\"thin\" layers in some of my ABS prints. I finally tracked the issue",
"while, enough filament had ground off that the gear teeth were filled with",
"cleaning out the extruder head with wire and there don't seem to be",
"printing at this temperature will increase wear on the thermistor and increase my",
"continued printing at this temperature will increase wear on the thermistor and increase",
"skipping during filament feed). Raising the temperature on the extruder seems to fix",
"I finally tracked the issue down to the extruder gear grinding the filament",
"and increase my chances of clogging PLA in the gear (an issue I've",
"have a FlashForge CreatorX (MakerBot clone) that's been working fine for about 15",
"started doing the same thing during an overnight print (thin layers on prints,",
"down to the extruder gear grinding the filament (after a while, enough filament",
"at 242 °C, much higher than I used to need. I worry that",
"filled with plastic). I cleaned the gear twice before giving up on ABS",
"were filled with plastic). I cleaned the gear twice before giving up on",
"CreatorX (MakerBot clone) that's been working fine for about 15 months. Int he",
"on prints, audible skipping during filament feed). Raising the temperature on the extruder",
"gear grinding the filament (after a while, enough filament had ground off that",
"prints. I finally tracked the issue down to the extruder gear grinding the",
"same thing during an overnight print (thin layers on prints, audible skipping during",
"I cleaned the gear twice before giving up on ABS and switching to",
"Int he past month, I started noticing \"thin\" layers in some of my",
"my chances of clogging PLA in the gear (an issue I've had twice",
"a while, enough filament had ground off that the gear teeth were filled",
"filament had ground off that the gear teeth were filled with plastic). I",
"to PLA. Everything seemed ok until the PLA started doing the same thing",
"gear (an issue I've had twice before). Are there any common issues that",
"with plastic). I cleaned the gear twice before giving up on ABS and",
"to the extruder gear grinding the filament (after a while, enough filament had",
"I've had twice before). Are there any common issues that cause this issue",
"the PLA started doing the same thing during an overnight print (thin layers",
"PLA started doing the same thing during an overnight print (thin layers on",
"clone) that's been working fine for about 15 months. Int he past month,",
"and switching to PLA. Everything seemed ok until the PLA started doing the",
"that's been working fine for about 15 months. Int he past month, I",
"need. I worry that continued printing at this temperature will increase wear on",
"thing during an overnight print (thin layers on prints, audible skipping during filament",
"extruder gear grinding the filament (after a while, enough filament had ground off",
"increase wear on the thermistor and increase my chances of clogging PLA in",
"cause this issue of filament not feeding properly? I've tried cleaning out the",
"PLA. Everything seemed ok until the PLA started doing the same thing during",
"a FlashForge CreatorX (MakerBot clone) that's been working fine for about 15 months.",
"(an issue I've had twice before). Are there any common issues that cause",
"the gear teeth were filled with plastic). I cleaned the gear twice before",
"temperature will increase wear on the thermistor and increase my chances of clogging",
"higher than I used to need. I worry that continued printing at this",
"before). Are there any common issues that cause this issue of filament not",
"layers on prints, audible skipping during filament feed). Raising the temperature on the",
"before giving up on ABS and switching to PLA. Everything seemed ok until",
"up on ABS and switching to PLA. Everything seemed ok until the PLA",
"this temperature will increase wear on the thermistor and increase my chances of",
"had twice before). Are there any common issues that cause this issue of",
"tracked the issue down to the extruder gear grinding the filament (after a",
"of my ABS prints. I finally tracked the issue down to the extruder",
"on the extruder seems to fix the problem, but I'm now extruding PLA",
"the thermistor and increase my chances of clogging PLA in the gear (an",
"in some of my ABS prints. I finally tracked the issue down to",
"there any common issues that cause this issue of filament not feeding properly?",
"fine for about 15 months. Int he past month, I started noticing \"thin\"",
"the temperature on the extruder seems to fix the problem, but I'm now",
"ABS prints. I finally tracked the issue down to the extruder gear grinding",
"switching to PLA. Everything seemed ok until the PLA started doing the same",
"extruding PLA at 242 °C, much higher than I used to need. I",
"feeding properly? I've tried cleaning out the extruder head with wire and there",
"on ABS and switching to PLA. Everything seemed ok until the PLA started",
"doing the same thing during an overnight print (thin layers on prints, audible",
"to need. I worry that continued printing at this temperature will increase wear",
"the same thing during an overnight print (thin layers on prints, audible skipping",
"an overnight print (thin layers on prints, audible skipping during filament feed). Raising",
"but I'm now extruding PLA at 242 °C, much higher than I used",
"problem, but I'm now extruding PLA at 242 °C, much higher than I",
"(after a while, enough filament had ground off that the gear teeth were",
"layers in some of my ABS prints. I finally tracked the issue down",
"off that the gear teeth were filled with plastic). I cleaned the gear",
"about 15 months. Int he past month, I started noticing \"thin\" layers in",
"in the gear (an issue I've had twice before). Are there any common",
"that cause this issue of filament not feeding properly? I've tried cleaning out",
"Raising the temperature on the extruder seems to fix the problem, but I'm",
"any common issues that cause this issue of filament not feeding properly? I've",
"°C, much higher than I used to need. I worry that continued printing",
"until the PLA started doing the same thing during an overnight print (thin",
"for about 15 months. Int he past month, I started noticing \"thin\" layers",
"the extruder gear grinding the filament (after a while, enough filament had ground",
"will increase wear on the thermistor and increase my chances of clogging PLA",
"teeth were filled with plastic). I cleaned the gear twice before giving up",
"of filament not feeding properly? I've tried cleaning out the extruder head with",
"extruder seems to fix the problem, but I'm now extruding PLA at 242",
"of clogging PLA in the gear (an issue I've had twice before). Are",
"wear on the thermistor and increase my chances of clogging PLA in the",
"filament not feeding properly? I've tried cleaning out the extruder head with wire",
"(MakerBot clone) that's been working fine for about 15 months. Int he past",
"that continued printing at this temperature will increase wear on the thermistor and",
"twice before). Are there any common issues that cause this issue of filament",
"print (thin layers on prints, audible skipping during filament feed). Raising the temperature",
"I'm now extruding PLA at 242 °C, much higher than I used to",
"used to need. I worry that continued printing at this temperature will increase",
"prints, audible skipping during filament feed). Raising the temperature on the extruder seems",
"ok until the PLA started doing the same thing during an overnight print",
"on the thermistor and increase my chances of clogging PLA in the gear",
"he past month, I started noticing \"thin\" layers in some of my ABS",
"Are there any common issues that cause this issue of filament not feeding",
"15 months. Int he past month, I started noticing \"thin\" layers in some",
"seemed ok until the PLA started doing the same thing during an overnight",
"overnight print (thin layers on prints, audible skipping during filament feed). Raising the",
"(thin layers on prints, audible skipping during filament feed). Raising the temperature on",
"my ABS prints. I finally tracked the issue down to the extruder gear",
"had ground off that the gear teeth were filled with plastic). I cleaned",
"ABS and switching to PLA. Everything seemed ok until the PLA started doing",
"seems to fix the problem, but I'm now extruding PLA at 242 °C,",
"fix the problem, but I'm now extruding PLA at 242 °C, much higher",
"I started noticing \"thin\" layers in some of my ABS prints. I finally",
"grinding the filament (after a while, enough filament had ground off that the",
"ground off that the gear teeth were filled with plastic). I cleaned the",
"cleaned the gear twice before giving up on ABS and switching to PLA.",
"the problem, but I'm now extruding PLA at 242 °C, much higher than",
"I worry that continued printing at this temperature will increase wear on the",
"I've tried cleaning out the extruder head with wire and there don't seem",
"been working fine for about 15 months. Int he past month, I started",
"enough filament had ground off that the gear teeth were filled with plastic).",
"properly? I've tried cleaning out the extruder head with wire and there don't",
"month, I started noticing \"thin\" layers in some of my ABS prints. I",
"the issue down to the extruder gear grinding the filament (after a while,",
"giving up on ABS and switching to PLA. Everything seemed ok until the",
"242 °C, much higher than I used to need. I worry that continued",
"PLA in the gear (an issue I've had twice before). Are there any",
"gear teeth were filled with plastic). I cleaned the gear twice before giving",
"not feeding properly? I've tried cleaning out the extruder head with wire and",
"audible skipping during filament feed). Raising the temperature on the extruder seems to",
"worry that continued printing at this temperature will increase wear on the thermistor",
"some of my ABS prints. I finally tracked the issue down to the",
"tried cleaning out the extruder head with wire and there don't seem to",
"common issues that cause this issue of filament not feeding properly? I've tried",
"Everything seemed ok until the PLA started doing the same thing during an",
"clogging PLA in the gear (an issue I've had twice before). Are there",
"finally tracked the issue down to the extruder gear grinding the filament (after",
"past month, I started noticing \"thin\" layers in some of my ABS prints.",
"than I used to need. I worry that continued printing at this temperature",
"temperature on the extruder seems to fix the problem, but I'm now extruding",
"gear twice before giving up on ABS and switching to PLA. Everything seemed",
"the gear twice before giving up on ABS and switching to PLA. Everything",
"the extruder head with wire and there don't seem to be any clogs…",
"plastic). I cleaned the gear twice before giving up on ABS and switching",
"started noticing \"thin\" layers in some of my ABS prints. I finally tracked",
"now extruding PLA at 242 °C, much higher than I used to need.",
"out the extruder head with wire and there don't seem to be any",
"noticing \"thin\" layers in some of my ABS prints. I finally tracked the",
"issues that cause this issue of filament not feeding properly? I've tried cleaning",
"chances of clogging PLA in the gear (an issue I've had twice before).",
"filament (after a while, enough filament had ground off that the gear teeth",
"working fine for about 15 months. Int he past month, I started noticing",
"PLA at 242 °C, much higher than I used to need. I worry",
"issue I've had twice before). Are there any common issues that cause this",
"that the gear teeth were filled with plastic). I cleaned the gear twice",
"the filament (after a while, enough filament had ground off that the gear",
"filament feed). Raising the temperature on the extruder seems to fix the problem,",
"during filament feed). Raising the temperature on the extruder seems to fix the",
"issue of filament not feeding properly? I've tried cleaning out the extruder head",
"the extruder seems to fix the problem, but I'm now extruding PLA at",
"I used to need. I worry that continued printing at this temperature will",
"twice before giving up on ABS and switching to PLA. Everything seemed ok",
"feed). Raising the temperature on the extruder seems to fix the problem, but",
"issue down to the extruder gear grinding the filament (after a while, enough",
"this issue of filament not feeding properly? I've tried cleaning out the extruder",
"FlashForge CreatorX (MakerBot clone) that's been working fine for about 15 months. Int",
"to fix the problem, but I'm now extruding PLA at 242 °C, much",
"months. Int he past month, I started noticing \"thin\" layers in some of",
"during an overnight print (thin layers on prints, audible skipping during filament feed).",
"much higher than I used to need. I worry that continued printing at",
"increase my chances of clogging PLA in the gear (an issue I've had",
"the gear (an issue I've had twice before). Are there any common issues"
] |
[
"problems I had with prints detaching from the buildplate during printing. However, it",
"much and just not detaching from the build plate. I'm specifically not asking",
"opposite problem of prints sticking too much and just not detaching from the",
"sticking too much and just not detaching from the build plate. I'm specifically",
"the build plate. I'm specifically not asking how to prevent this from happening",
"great because the printed plastic really sticks to it, it pretty much solved",
"how to prevent this from happening - I'm asking what to do after",
"not detaching from the build plate. I'm specifically not asking how to prevent",
"solved all the problems I had with prints detaching from the buildplate during",
"from the build plate. I'm specifically not asking how to prevent this from",
"printing. However, it does sometimes cause the opposite problem of prints sticking too",
"prevent this from happening - I'm asking what to do after I made",
"I'm asking what to do after I made a mistake and now have",
"However, it does sometimes cause the opposite problem of prints sticking too much",
"problem of prints sticking too much and just not detaching from the build",
"prints sticking too much and just not detaching from the build plate. I'm",
"is great because the printed plastic really sticks to it, it pretty much",
"sticks to it, it pretty much solved all the problems I had with",
"buildplate during printing. However, it does sometimes cause the opposite problem of prints",
"build plate. I'm specifically not asking how to prevent this from happening -",
"this from happening - I'm asking what to do after I made a",
"from happening - I'm asking what to do after I made a mistake",
"happening - I'm asking what to do after I made a mistake and",
"prints detaching from the buildplate during printing. However, it does sometimes cause the",
"do after I made a mistake and now have a print that isn't",
"and just not detaching from the build plate. I'm specifically not asking how",
"really sticks to it, it pretty much solved all the problems I had",
"during printing. However, it does sometimes cause the opposite problem of prints sticking",
"pretty much solved all the problems I had with prints detaching from the",
"from the buildplate during printing. However, it does sometimes cause the opposite problem",
"sometimes cause the opposite problem of prints sticking too much and just not",
"the problems I had with prints detaching from the buildplate during printing. However,",
"the buildplate during printing. However, it does sometimes cause the opposite problem of",
"BuildTak is great because the printed plastic really sticks to it, it pretty",
"detaching from the build plate. I'm specifically not asking how to prevent this",
"detaching from the buildplate during printing. However, it does sometimes cause the opposite",
"what to do after I made a mistake and now have a print",
"had with prints detaching from the buildplate during printing. However, it does sometimes",
"too much and just not detaching from the build plate. I'm specifically not",
"- I'm asking what to do after I made a mistake and now",
"I made a mistake and now have a print that isn't coming loose.",
"asking how to prevent this from happening - I'm asking what to do",
"the printed plastic really sticks to it, it pretty much solved all the",
"to prevent this from happening - I'm asking what to do after I",
"cause the opposite problem of prints sticking too much and just not detaching",
"to it, it pretty much solved all the problems I had with prints",
"it does sometimes cause the opposite problem of prints sticking too much and",
"does sometimes cause the opposite problem of prints sticking too much and just",
"it, it pretty much solved all the problems I had with prints detaching",
"just not detaching from the build plate. I'm specifically not asking how to",
"not asking how to prevent this from happening - I'm asking what to",
"after I made a mistake and now have a print that isn't coming",
"much solved all the problems I had with prints detaching from the buildplate",
"asking what to do after I made a mistake and now have a",
"of prints sticking too much and just not detaching from the build plate.",
"specifically not asking how to prevent this from happening - I'm asking what",
"printed plastic really sticks to it, it pretty much solved all the problems",
"it pretty much solved all the problems I had with prints detaching from",
"with prints detaching from the buildplate during printing. However, it does sometimes cause",
"the opposite problem of prints sticking too much and just not detaching from",
"plate. I'm specifically not asking how to prevent this from happening - I'm",
"to do after I made a mistake and now have a print that",
"plastic really sticks to it, it pretty much solved all the problems I",
"because the printed plastic really sticks to it, it pretty much solved all",
"all the problems I had with prints detaching from the buildplate during printing.",
"I had with prints detaching from the buildplate during printing. However, it does",
"I'm specifically not asking how to prevent this from happening - I'm asking"
] |
[
"3D printer available today? I am looking for something suitable for general use",
"printer available today? I am looking for something suitable for general use in",
"What is the least expensive 3D printer available today? I am looking for",
"I am looking for something suitable for general use in a home office.",
"expensive 3D printer available today? I am looking for something suitable for general",
"is the least expensive 3D printer available today? I am looking for something",
"least expensive 3D printer available today? I am looking for something suitable for",
"available today? I am looking for something suitable for general use in a",
"today? I am looking for something suitable for general use in a home",
"the least expensive 3D printer available today? I am looking for something suitable"
] |