Split (1)

train · 10.4M rows

ngram listlengths 0 10.5k
[ "have Auto Mesh Bed Leveling enabled on your printer, it's not possible to", "enabled on your printer, it's not possible to continue a failed print, is", "Auto Mesh Bed Leveling enabled on your printer, it's not possible to continue", "When you have Auto Mesh Bed Leveling enabled on your printer, it's not", "on your printer, it's not possible to continue a failed print, is it?", "Bed Leveling enabled on your printer, it's not possible to continue a failed", "Leveling enabled on your printer, it's not possible to continue a failed print,", "Mesh Bed Leveling enabled on your printer, it's not possible to continue a", "you have Auto Mesh Bed Leveling enabled on your printer, it's not possible" ]
[ "is nice). This is what we figured we were getting with the FABtotum,", "quality, but I am saying that we are willing to pay more if", "overcome many common 3D printing issues, which I find necessary to do when", "have been using the FABtotum personal fabricator for several months now. The machine", "necessary to do when becoming proficient in this technique. However the printer has", "is one. Can you anyone recommend a printer fitting these needs in these", "doing experiments. I have overcome many common 3D printing issues, which I find", "The machine is good, however not flawless, and has set us back from", "would love to tinker with the printer and modify it to my needs,", "more reliable, can produce parts relatively quick, good resolution, and it is nice", "more if that is where the quality lies. For example, I have come", "recommend a printer fitting these needs in these budget categories?: * 3000 USD", "nice if it has multiple modes (i.e FDM, SLA, and even 3D scanning", "if it has multiple modes (i.e FDM, SLA, and even 3D scanning is", "strapped for time, however we have funding for a higher quality printer if", "lies. For example, I have come across the Form 2, Ultimaker, and BCN3D", "if there is one. Can you anyone recommend a printer fitting these needs", "the FABtotum, but as I mentioned it has produced setbacks. Now I would", "has also had its own personal mechanical and software issues. Our lab is", "However the printer has also had its own personal mechanical and software issues.", "Form 2, Ultimaker, and BCN3D sigma printers which seem quite nice. Any opinions", "categories?: * 3000 USD * 5000 USD * 8000 USD or more I", "reliable, can produce parts relatively quick, good resolution, and it is nice if", "when becoming proficient in this technique. However the printer has also had its", "a biological laboratory where we have been using the FABtotum personal fabricator for", "and even 3D scanning is nice). This is what we figured we were", "I work in a biological laboratory where we have been using the FABtotum", "we figured we were getting with the FABtotum, but as I mentioned it", "FABtotum, but as I mentioned it has produced setbacks. Now I would love", "is where the quality lies. For example, I have come across the Form", "printer fitting these needs in these budget categories?: * 3000 USD * 5000", "with the printer and modify it to my needs, but unfortunately our lab", "doesn't equate quality, but I am saying that we are willing to pay", "8000 USD or more I know price doesn't equate quality, but I am", "but as I mentioned it has produced setbacks. Now I would love to", "setbacks. Now I would love to tinker with the printer and modify it", "budget categories?: * 3000 USD * 5000 USD * 8000 USD or more", "quality lies. For example, I have come across the Form 2, Ultimaker, and", "and modify it to my needs, but unfortunately our lab is strapped for", "what we figured we were getting with the FABtotum, but as I mentioned", "and BCN3D sigma printers which seem quite nice. Any opinions are very appreciated.", "tinker with the printer and modify it to my needs, but unfortunately our", "that is more reliable, can produce parts relatively quick, good resolution, and it", "but I am saying that we are willing to pay more if that", "* 5000 USD * 8000 USD or more I know price doesn't equate", "have overcome many common 3D printing issues, which I find necessary to do", "there is one. Can you anyone recommend a printer fitting these needs in", "example, I have come across the Form 2, Ultimaker, and BCN3D sigma printers", "FABtotum personal fabricator for several months now. The machine is good, however not", "it is nice if it has multiple modes (i.e FDM, SLA, and even", "unfortunately our lab is strapped for time, however we have funding for a", "3D printing issues, which I find necessary to do when becoming proficient in", "however we have funding for a higher quality printer if there is one.", "I have come across the Form 2, Ultimaker, and BCN3D sigma printers which", "USD * 5000 USD * 8000 USD or more I know price doesn't", "price doesn't equate quality, but I am saying that we are willing to", "* 8000 USD or more I know price doesn't equate quality, but I", "this technique. However the printer has also had its own personal mechanical and", "that we are willing to pay more if that is where the quality", "a higher quality printer if there is one. Can you anyone recommend a", "USD or more I know price doesn't equate quality, but I am saying", "mechanical and software issues. Our lab is seeking a printer that is more", "figured we were getting with the FABtotum, but as I mentioned it has", "I am saying that we are willing to pay more if that is", "printer has also had its own personal mechanical and software issues. Our lab", "* 3000 USD * 5000 USD * 8000 USD or more I know", "parts relatively quick, good resolution, and it is nice if it has multiple", "I would love to tinker with the printer and modify it to my", "our lab is strapped for time, however we have funding for a higher", "higher quality printer if there is one. Can you anyone recommend a printer", "Can you anyone recommend a printer fitting these needs in these budget categories?:", "in these budget categories?: * 3000 USD * 5000 USD * 8000 USD", "is good, however not flawless, and has set us back from doing experiments.", "machine is good, however not flawless, and has set us back from doing", "USD * 8000 USD or more I know price doesn't equate quality, but", "5000 USD * 8000 USD or more I know price doesn't equate quality,", "many common 3D printing issues, which I find necessary to do when becoming", "have come across the Form 2, Ultimaker, and BCN3D sigma printers which seem", "even 3D scanning is nice). This is what we figured we were getting", "are willing to pay more if that is where the quality lies. For", "printer if there is one. Can you anyone recommend a printer fitting these", "nice). This is what we figured we were getting with the FABtotum, but", "biological laboratory where we have been using the FABtotum personal fabricator for several", "we were getting with the FABtotum, but as I mentioned it has produced", "needs in these budget categories?: * 3000 USD * 5000 USD * 8000", "to do when becoming proficient in this technique. However the printer has also", "several months now. The machine is good, however not flawless, and has set", "is strapped for time, however we have funding for a higher quality printer", "work in a biological laboratory where we have been using the FABtotum personal", "to pay more if that is where the quality lies. For example, I", "laboratory where we have been using the FABtotum personal fabricator for several months", "find necessary to do when becoming proficient in this technique. However the printer", "you anyone recommend a printer fitting these needs in these budget categories?: ", "I mentioned it has produced setbacks. Now I would love to tinker with", "has produced setbacks. Now I would love to tinker with the printer and", "or more I know price doesn't equate quality, but I am saying that", "has multiple modes (i.e FDM, SLA, and even 3D scanning is nice). This", "love to tinker with the printer and modify it to my needs, but", "in a biological laboratory where we have been using the FABtotum personal fabricator", "lab is seeking a printer that is more reliable, can produce parts relatively", "willing to pay more if that is where the quality lies. For example,", "pay more if that is where the quality lies. For example, I have", "however not flawless, and has set us back from doing experiments. I have", "it to my needs, but unfortunately our lab is strapped for time, however", "across the Form 2, Ultimaker, and BCN3D sigma printers which seem quite nice.", "own personal mechanical and software issues. Our lab is seeking a printer that", "the printer and modify it to my needs, but unfortunately our lab is", "a printer fitting these needs in these budget categories?: 3000 USD ", "printer and modify it to my needs, but unfortunately our lab is strapped", "equate quality, but I am saying that we are willing to pay more", "one. Can you anyone recommend a printer fitting these needs in these budget", "For example, I have come across the Form 2, Ultimaker, and BCN3D sigma", "proficient in this technique. However the printer has also had its own personal", "quality printer if there is one. Can you anyone recommend a printer fitting", "not flawless, and has set us back from doing experiments. I have overcome", "and it is nice if it has multiple modes (i.e FDM, SLA, and", "using the FABtotum personal fabricator for several months now. The machine is good,", "months now. The machine is good, however not flawless, and has set us", "in this technique. However the printer has also had its own personal mechanical", "we are willing to pay more if that is where the quality lies.", "do when becoming proficient in this technique. However the printer has also had", "I have overcome many common 3D printing issues, which I find necessary to", "I find necessary to do when becoming proficient in this technique. However the", "it has multiple modes (i.e FDM, SLA, and even 3D scanning is nice).", "as I mentioned it has produced setbacks. Now I would love to tinker", "more I know price doesn't equate quality, but I am saying that we", "quick, good resolution, and it is nice if it has multiple modes (i.e", "flawless, and has set us back from doing experiments. I have overcome many", "that is where the quality lies. For example, I have come across the", "software issues. Our lab is seeking a printer that is more reliable, can", "these needs in these budget categories?: 3000 USD * 5000 USD ", "it has produced setbacks. Now I would love to tinker with the printer", "come across the Form 2, Ultimaker, and BCN3D sigma printers which seem quite", "FDM, SLA, and even 3D scanning is nice). This is what we figured", "needs, but unfortunately our lab is strapped for time, however we have funding", "lab is strapped for time, however we have funding for a higher quality", "a printer that is more reliable, can produce parts relatively quick, good resolution,", "to my needs, but unfortunately our lab is strapped for time, however we", "have funding for a higher quality printer if there is one. Can you", "but unfortunately our lab is strapped for time, however we have funding for", "fabricator for several months now. The machine is good, however not flawless, and", "SLA, and even 3D scanning is nice). This is what we figured we", "getting with the FABtotum, but as I mentioned it has produced setbacks. Now", "and software issues. Our lab is seeking a printer that is more reliable,", "now. The machine is good, however not flawless, and has set us back", "the quality lies. For example, I have come across the Form 2, Ultimaker,", "been using the FABtotum personal fabricator for several months now. The machine is", "time, however we have funding for a higher quality printer if there is", "saying that we are willing to pay more if that is where the", "to tinker with the printer and modify it to my needs, but unfortunately", "issues. Our lab is seeking a printer that is more reliable, can produce", "which I find necessary to do when becoming proficient in this technique. However", "common 3D printing issues, which I find necessary to do when becoming proficient", "is more reliable, can produce parts relatively quick, good resolution, and it is", "produce parts relatively quick, good resolution, and it is nice if it has", "scanning is nice). This is what we figured we were getting with the", "for several months now. The machine is good, however not flawless, and has", "were getting with the FABtotum, but as I mentioned it has produced setbacks.", "the Form 2, Ultimaker, and BCN3D sigma printers which seem quite nice. Any", "and has set us back from doing experiments. I have overcome many common", "becoming proficient in this technique. However the printer has also had its own", "funding for a higher quality printer if there is one. Can you anyone", "fitting these needs in these budget categories?: 3000 USD * 5000 USD", "This is what we figured we were getting with the FABtotum, but as", "set us back from doing experiments. I have overcome many common 3D printing", "printing issues, which I find necessary to do when becoming proficient in this", "can produce parts relatively quick, good resolution, and it is nice if it", "Ultimaker, and BCN3D sigma printers which seem quite nice. Any opinions are very", "am saying that we are willing to pay more if that is where", "personal fabricator for several months now. The machine is good, however not flawless,", "personal mechanical and software issues. Our lab is seeking a printer that is", "the printer has also had its own personal mechanical and software issues. Our", "modify it to my needs, but unfortunately our lab is strapped for time,", "I know price doesn't equate quality, but I am saying that we are", "Now I would love to tinker with the printer and modify it to", "produced setbacks. Now I would love to tinker with the printer and modify", "its own personal mechanical and software issues. Our lab is seeking a printer", "we have funding for a higher quality printer if there is one. Can", "if that is where the quality lies. For example, I have come across", "where the quality lies. For example, I have come across the Form 2,", "had its own personal mechanical and software issues. Our lab is seeking a", "is what we figured we were getting with the FABtotum, but as I", "resolution, and it is nice if it has multiple modes (i.e FDM, SLA,", "3000 USD * 5000 USD * 8000 USD or more I know price", "2, Ultimaker, and BCN3D sigma printers which seem quite nice. Any opinions are", "for a higher quality printer if there is one. Can you anyone recommend", "also had its own personal mechanical and software issues. Our lab is seeking", "back from doing experiments. I have overcome many common 3D printing issues, which", "has set us back from doing experiments. I have overcome many common 3D", "us back from doing experiments. I have overcome many common 3D printing issues,", "issues, which I find necessary to do when becoming proficient in this technique.", "(i.e FDM, SLA, and even 3D scanning is nice). This is what we", "we have been using the FABtotum personal fabricator for several months now. The", "anyone recommend a printer fitting these needs in these budget categories?: * 3000", "with the FABtotum, but as I mentioned it has produced setbacks. Now I", "good resolution, and it is nice if it has multiple modes (i.e FDM,", "Our lab is seeking a printer that is more reliable, can produce parts", "3D scanning is nice). This is what we figured we were getting with", "where we have been using the FABtotum personal fabricator for several months now.", "for time, however we have funding for a higher quality printer if there", "modes (i.e FDM, SLA, and even 3D scanning is nice). This is what", "multiple modes (i.e FDM, SLA, and even 3D scanning is nice). This is", "my needs, but unfortunately our lab is strapped for time, however we have", "experiments. I have overcome many common 3D printing issues, which I find necessary", "relatively quick, good resolution, and it is nice if it has multiple modes", "is nice if it has multiple modes (i.e FDM, SLA, and even 3D", "technique. However the printer has also had its own personal mechanical and software", "from doing experiments. I have overcome many common 3D printing issues, which I", "the FABtotum personal fabricator for several months now. The machine is good, however", "mentioned it has produced setbacks. Now I would love to tinker with the", "these budget categories?: * 3000 USD * 5000 USD * 8000 USD or", "know price doesn't equate quality, but I am saying that we are willing", "good, however not flawless, and has set us back from doing experiments. I", "printer that is more reliable, can produce parts relatively quick, good resolution, and", "seeking a printer that is more reliable, can produce parts relatively quick, good", "is seeking a printer that is more reliable, can produce parts relatively quick," ]
[ "shows an analytical comparison? My biggest interest is PLA on a heated glass", "a hammer and chisel. Is there anything out there that shows an analytical", "be removed after it is done without requiring a hammer and chisel. Is", "make your part not come loose when it is printing but can be", "after it is done without requiring a hammer and chisel. Is there anything", "your part not come loose when it is printing but can be removed", "but can be removed after it is done without requiring a hammer and", "and chisel. Is there anything out there that shows an analytical comparison? My", "an analytical comparison? My biggest interest is PLA on a heated glass base.", "is printing but can be removed after it is done without requiring a", "printer bed to make your part not come loose when it is printing", "Is there anything out there that shows an analytical comparison? My biggest interest", "it is done without requiring a hammer and chisel. Is there anything out", "anything out there that shows an analytical comparison? My biggest interest is PLA", "put on your printer bed to make your part not come loose when", "out there that shows an analytical comparison? My biggest interest is PLA on", "it is printing but can be removed after it is done without requiring", "There are all sorts of stories of what to put on your printer", "chisel. Is there anything out there that shows an analytical comparison? My biggest", "can be removed after it is done without requiring a hammer and chisel.", "come loose when it is printing but can be removed after it is", "are all sorts of stories of what to put on your printer bed", "stories of what to put on your printer bed to make your part", "what to put on your printer bed to make your part not come", "part not come loose when it is printing but can be removed after", "on your printer bed to make your part not come loose when it", "not come loose when it is printing but can be removed after it", "bed to make your part not come loose when it is printing but", "that shows an analytical comparison? My biggest interest is PLA on a heated", "your printer bed to make your part not come loose when it is", "sorts of stories of what to put on your printer bed to make", "hammer and chisel. Is there anything out there that shows an analytical comparison?", "done without requiring a hammer and chisel. Is there anything out there that", "all sorts of stories of what to put on your printer bed to", "to put on your printer bed to make your part not come loose", "there anything out there that shows an analytical comparison? My biggest interest is", "of what to put on your printer bed to make your part not", "loose when it is printing but can be removed after it is done", "is done without requiring a hammer and chisel. Is there anything out there", "printing but can be removed after it is done without requiring a hammer", "removed after it is done without requiring a hammer and chisel. Is there", "of stories of what to put on your printer bed to make your", "to make your part not come loose when it is printing but can", "without requiring a hammer and chisel. Is there anything out there that shows", "requiring a hammer and chisel. Is there anything out there that shows an", "when it is printing but can be removed after it is done without", "there that shows an analytical comparison? My biggest interest is PLA on a" ]
[ "recycle it. I'm particularly interested in the viability of the two methods I", "to reuse the material from these failed prints. I am thinking about two", "it for injection molding. Is this something that is reasonably easy to do?", "most promising) 2. Are there other ways to easily reuse the material? I've", "leftover filament, and not ways to turn it back into filament or to", "head, silicone or printed ABS with some kind of sealant seem the most", "and not ways to turn it back into filament or to just recycle", "filament, and not ways to turn it back into filament or to just", "to do with the material is to chuck it in an old toaster", "do with the material is to chuck it in an old toaster oven", "so, what temperature would be reasonable to use? What materials would be good", "kind of sealant seem the most promising) 2. Are there other ways to", "ways to reuse scrap PLA material, not just leftover filament, and not ways", "other ways to easily reuse the material? I've noticed that when PLA is", "reuse it for injection molding. Is this something that is reasonably easy to", "material is to chuck it in an old toaster oven and reuse it", "it. I'm particularly interested in the viability of the two methods I suggested,", "to somewhere around 50-60 degrees C (120-150 F) it becomes somewhat soft and", "oven and reuse it for injection molding. Is this something that is reasonably", "to easily reuse the material? I've noticed that when PLA is heated to", "two methods: 1. The obvious thing to do with the material is to", "resulting in a lot of failed prints (as well as successes, fortunately). I'd", "an old toaster oven and reuse it for injection molding. Is this something", "there other ways to easily reuse the material? I've noticed that when PLA", "if possible, find a way to reuse the material from these failed prints.", "the material is to chuck it in an old toaster oven and reuse", "anyone have experience molding hot PLA? EDIT: To be clear, I'm specifically asking", "I suggested, and if anyone has experience (positive or negative) with either I'd", "that when PLA is heated to somewhere around 50-60 degrees C (120-150 F)", "to turn it back into filament or to just recycle it. I'm particularly", "failed prints (as well as successes, fortunately). I'd like to, if possible, find", "a 3D printer and have been experimenting with it a lot, resulting in", "What materials would be good to use for the mold? (off the top", "or printed ABS with some kind of sealant seem the most promising) 2.", "easy to do? If so, what temperature would be reasonable to use? What", "for injection molding. Is this something that is reasonably easy to do? If", "it in an old toaster oven and reuse it for injection molding. Is", "printer and have been experimenting with it a lot, resulting in a lot", "noticed that when PLA is heated to somewhere around 50-60 degrees C (120-150", "obvious thing to do with the material is to chuck it in an", "from these failed prints. I am thinking about two methods: 1. The obvious", "(off the top of my head, silicone or printed ABS with some kind", "it back into filament or to just recycle it. I'm particularly interested in", "two methods I suggested, and if anyone has experience (positive or negative) with", "viability of the two methods I suggested, and if anyone has experience (positive", "something that is reasonably easy to do? If so, what temperature would be", "possible, find a way to reuse the material from these failed prints. I", "heated to somewhere around 50-60 degrees C (120-150 F) it becomes somewhat soft", "when PLA is heated to somewhere around 50-60 degrees C (120-150 F) it", "EDIT: To be clear, I'm specifically asking about ways to reuse scrap PLA", "to reuse scrap PLA material, not just leftover filament, and not ways to", "of failed prints (as well as successes, fortunately). I'd like to, if possible,", "got a 3D printer and have been experimenting with it a lot, resulting", "I'd like to, if possible, find a way to reuse the material from", "would be good to use for the mold? (off the top of my", "in a lot of failed prints (as well as successes, fortunately). I'd like", "easily reuse the material? I've noticed that when PLA is heated to somewhere", "injection molding. Is this something that is reasonably easy to do? If so,", "some kind of sealant seem the most promising) 2. Are there other ways", "is heated to somewhere around 50-60 degrees C (120-150 F) it becomes somewhat", "the mold? (off the top of my head, silicone or printed ABS with", "what temperature would be reasonable to use? What materials would be good to", "and have been experimenting with it a lot, resulting in a lot of", "PLA is heated to somewhere around 50-60 degrees C (120-150 F) it becomes", "like to, if possible, find a way to reuse the material from these", "silicone or printed ABS with some kind of sealant seem the most promising)", "I recently got a 3D printer and have been experimenting with it a", "reasonably easy to do? If so, what temperature would be reasonable to use?", "If so, what temperature would be reasonable to use? What materials would be", "would be reasonable to use? What materials would be good to use for", "material, not just leftover filament, and not ways to turn it back into", "lot of failed prints (as well as successes, fortunately). I'd like to, if", "in an old toaster oven and reuse it for injection molding. Is this", "reuse the material? I've noticed that when PLA is heated to somewhere around", "well as successes, fortunately). I'd like to, if possible, find a way to", "PLA? EDIT: To be clear, I'm specifically asking about ways to reuse scrap", "turn it back into filament or to just recycle it. I'm particularly interested", "around 50-60 degrees C (120-150 F) it becomes somewhat soft and malleable. Does", "with some kind of sealant seem the most promising) 2. Are there other", "mold? (off the top of my head, silicone or printed ABS with some", "the most promising) 2. Are there other ways to easily reuse the material?", "asking about ways to reuse scrap PLA material, not just leftover filament, and", "just leftover filament, and not ways to turn it back into filament or", "not ways to turn it back into filament or to just recycle it.", "good to use for the mold? (off the top of my head, silicone", "clear, I'm specifically asking about ways to reuse scrap PLA material, not just", "(120-150 F) it becomes somewhat soft and malleable. Does anyone have experience molding", "materials would be good to use for the mold? (off the top of", "that is reasonably easy to do? If so, what temperature would be reasonable", "50-60 degrees C (120-150 F) it becomes somewhat soft and malleable. Does anyone", "about ways to reuse scrap PLA material, not just leftover filament, and not", "it becomes somewhat soft and malleable. Does anyone have experience molding hot PLA?", "use for the mold? (off the top of my head, silicone or printed", "particularly interested in the viability of the two methods I suggested, and if", "if anyone has experience (positive or negative) with either I'd like to hear", "Does anyone have experience molding hot PLA? EDIT: To be clear, I'm specifically", "experimenting with it a lot, resulting in a lot of failed prints (as", "with the material is to chuck it in an old toaster oven and", "to, if possible, find a way to reuse the material from these failed", "for the mold? (off the top of my head, silicone or printed ABS", "soft and malleable. Does anyone have experience molding hot PLA? EDIT: To be", "use? What materials would be good to use for the mold? (off the", "To be clear, I'm specifically asking about ways to reuse scrap PLA material,", "into filament or to just recycle it. I'm particularly interested in the viability", "prints (as well as successes, fortunately). I'd like to, if possible, find a", "be reasonable to use? What materials would be good to use for the", "to use? What materials would be good to use for the mold? (off", "failed prints. I am thinking about two methods: 1. The obvious thing to", "reuse scrap PLA material, not just leftover filament, and not ways to turn", "to use for the mold? (off the top of my head, silicone or", "filament or to just recycle it. I'm particularly interested in the viability of", "find a way to reuse the material from these failed prints. I am", "ways to easily reuse the material? I've noticed that when PLA is heated", "malleable. Does anyone have experience molding hot PLA? EDIT: To be clear, I'm", "recently got a 3D printer and have been experimenting with it a lot,", "my head, silicone or printed ABS with some kind of sealant seem the", "to chuck it in an old toaster oven and reuse it for injection", "a way to reuse the material from these failed prints. I am thinking", "lot, resulting in a lot of failed prints (as well as successes, fortunately).", "fortunately). I'd like to, if possible, find a way to reuse the material", "and if anyone has experience (positive or negative) with either I'd like to", "old toaster oven and reuse it for injection molding. Is this something that", "top of my head, silicone or printed ABS with some kind of sealant", "is to chuck it in an old toaster oven and reuse it for", "a lot of failed prints (as well as successes, fortunately). I'd like to,", "to do? If so, what temperature would be reasonable to use? What materials", "it a lot, resulting in a lot of failed prints (as well as", "seem the most promising) 2. Are there other ways to easily reuse the", "with it a lot, resulting in a lot of failed prints (as well", "material? I've noticed that when PLA is heated to somewhere around 50-60 degrees", "thinking about two methods: 1. The obvious thing to do with the material", "I'm particularly interested in the viability of the two methods I suggested, and", "in the viability of the two methods I suggested, and if anyone has", "material from these failed prints. I am thinking about two methods: 1. The", "becomes somewhat soft and malleable. Does anyone have experience molding hot PLA? EDIT:", "I've noticed that when PLA is heated to somewhere around 50-60 degrees C", "this something that is reasonably easy to do? If so, what temperature would", "I'm specifically asking about ways to reuse scrap PLA material, not just leftover", "3D printer and have been experimenting with it a lot, resulting in a", "just recycle it. I'm particularly interested in the viability of the two methods", "not just leftover filament, and not ways to turn it back into filament", "do? If so, what temperature would be reasonable to use? What materials would", "of my head, silicone or printed ABS with some kind of sealant seem", "F) it becomes somewhat soft and malleable. Does anyone have experience molding hot", "as successes, fortunately). I'd like to, if possible, find a way to reuse", "methods I suggested, and if anyone has experience (positive or negative) with either", "have been experimenting with it a lot, resulting in a lot of failed", "to just recycle it. I'm particularly interested in the viability of the two", "be clear, I'm specifically asking about ways to reuse scrap PLA material, not", "the top of my head, silicone or printed ABS with some kind of", "ways to turn it back into filament or to just recycle it. I'm", "interested in the viability of the two methods I suggested, and if anyone", "is reasonably easy to do? If so, what temperature would be reasonable to", "somewhat soft and malleable. Does anyone have experience molding hot PLA? EDIT: To", "PLA material, not just leftover filament, and not ways to turn it back", "molding hot PLA? EDIT: To be clear, I'm specifically asking about ways to", "toaster oven and reuse it for injection molding. Is this something that is", "promising) 2. Are there other ways to easily reuse the material? I've noticed", "be good to use for the mold? (off the top of my head,", "molding. Is this something that is reasonably easy to do? If so, what", "back into filament or to just recycle it. I'm particularly interested in the", "the material? I've noticed that when PLA is heated to somewhere around 50-60", "the material from these failed prints. I am thinking about two methods: 1.", "about two methods: 1. The obvious thing to do with the material is", "ABS with some kind of sealant seem the most promising) 2. Are there", "a lot, resulting in a lot of failed prints (as well as successes,", "of sealant seem the most promising) 2. Are there other ways to easily", "reasonable to use? What materials would be good to use for the mold?", "2. Are there other ways to easily reuse the material? I've noticed that", "has experience (positive or negative) with either I'd like to hear about it.", "The obvious thing to do with the material is to chuck it in", "way to reuse the material from these failed prints. I am thinking about", "successes, fortunately). I'd like to, if possible, find a way to reuse the", "prints. I am thinking about two methods: 1. The obvious thing to do", "chuck it in an old toaster oven and reuse it for injection molding.", "sealant seem the most promising) 2. Are there other ways to easily reuse", "and reuse it for injection molding. Is this something that is reasonably easy", "thing to do with the material is to chuck it in an old", "somewhere around 50-60 degrees C (120-150 F) it becomes somewhat soft and malleable.", "degrees C (120-150 F) it becomes somewhat soft and malleable. Does anyone have", "temperature would be reasonable to use? What materials would be good to use", "and malleable. Does anyone have experience molding hot PLA? EDIT: To be clear,", "suggested, and if anyone has experience (positive or negative) with either I'd like", "1. The obvious thing to do with the material is to chuck it", "am thinking about two methods: 1. The obvious thing to do with the", "printed ABS with some kind of sealant seem the most promising) 2. Are", "C (120-150 F) it becomes somewhat soft and malleable. Does anyone have experience", "Is this something that is reasonably easy to do? If so, what temperature", "the viability of the two methods I suggested, and if anyone has experience", "the two methods I suggested, and if anyone has experience (positive or negative)", "(as well as successes, fortunately). I'd like to, if possible, find a way", "experience molding hot PLA? EDIT: To be clear, I'm specifically asking about ways", "hot PLA? EDIT: To be clear, I'm specifically asking about ways to reuse", "or to just recycle it. I'm particularly interested in the viability of the", "of the two methods I suggested, and if anyone has experience (positive or", "scrap PLA material, not just leftover filament, and not ways to turn it", "been experimenting with it a lot, resulting in a lot of failed prints", "methods: 1. The obvious thing to do with the material is to chuck", "Are there other ways to easily reuse the material? I've noticed that when", "reuse the material from these failed prints. I am thinking about two methods:", "specifically asking about ways to reuse scrap PLA material, not just leftover filament,", "I am thinking about two methods: 1. The obvious thing to do with", "anyone has experience (positive or negative) with either I'd like to hear about", "have experience molding hot PLA? EDIT: To be clear, I'm specifically asking about", "these failed prints. I am thinking about two methods: 1. The obvious thing" ]
[ "minutes, while the measured printing time is 2 minutes and 40 seconds. What", "that the actual printing time is longer than the time estimated by Cura,", "using a Delta Wasp 20 40 equipped with a clay extruder for which", "due to acceleration and jerk factor. However, I have printed a small pyramid", "pyramid for which Cura estimates 4.0 minutes, while the measured printing time is", "extruder for which parameters such as E-step (for E axis) are unpredictable since", "which parameters such as E-step (for E axis) are unpredictable since I have", "clay extruder for which parameters such as E-step (for E axis) are unpredictable", "I'm using a Delta Wasp 20 40 equipped with a clay extruder for", "longer than the time estimated by Cura, due to acceleration and jerk factor.", "factor. However, I have printed a small pyramid for which Cura estimates 4.0", "For clarity, I'm using a Delta Wasp 20 40 equipped with a clay", "such as E-step (for E axis) are unpredictable since I have no filament.", "the time estimated by Cura, due to acceleration and jerk factor. However, I", "and jerk factor. However, I have printed a small pyramid for which Cura", "which Cura estimates 4.0 minutes, while the measured printing time is 2 minutes", "is 2 minutes and 40 seconds. What reasons could produce this difference? For", "seconds. What reasons could produce this difference? For clarity, I'm using a Delta", "to acceleration and jerk factor. However, I have printed a small pyramid for", "clarity, I'm using a Delta Wasp 20 40 equipped with a clay extruder", "Delta Wasp 20 40 equipped with a clay extruder for which parameters such", "the actual printing time is longer than the time estimated by Cura, due", "minutes and 40 seconds. What reasons could produce this difference? For clarity, I'm", "jerk factor. However, I have printed a small pyramid for which Cura estimates", "4.0 minutes, while the measured printing time is 2 minutes and 40 seconds.", "a clay extruder for which parameters such as E-step (for E axis) are", "produce this difference? For clarity, I'm using a Delta Wasp 20 40 equipped", "difference? For clarity, I'm using a Delta Wasp 20 40 equipped with a", "small pyramid for which Cura estimates 4.0 minutes, while the measured printing time", "actual printing time is longer than the time estimated by Cura, due to", "estimated by Cura, due to acceleration and jerk factor. However, I have printed", "reasons could produce this difference? For clarity, I'm using a Delta Wasp 20", "time is longer than the time estimated by Cura, due to acceleration and", "time estimated by Cura, due to acceleration and jerk factor. However, I have", "acceleration and jerk factor. However, I have printed a small pyramid for which", "40 seconds. What reasons could produce this difference? For clarity, I'm using a", "a Delta Wasp 20 40 equipped with a clay extruder for which parameters", "Cura estimates 4.0 minutes, while the measured printing time is 2 minutes and", "What reasons could produce this difference? For clarity, I'm using a Delta Wasp", "time is 2 minutes and 40 seconds. What reasons could produce this difference?", "and 40 seconds. What reasons could produce this difference? For clarity, I'm using", "while the measured printing time is 2 minutes and 40 seconds. What reasons", "than the time estimated by Cura, due to acceleration and jerk factor. However,", "with a clay extruder for which parameters such as E-step (for E axis)", "However, I have printed a small pyramid for which Cura estimates 4.0 minutes,", "for which parameters such as E-step (for E axis) are unpredictable since I", "know that the actual printing time is longer than the time estimated by", "is longer than the time estimated by Cura, due to acceleration and jerk", "printing time is 2 minutes and 40 seconds. What reasons could produce this", "40 equipped with a clay extruder for which parameters such as E-step (for", "printed a small pyramid for which Cura estimates 4.0 minutes, while the measured", "could produce this difference? For clarity, I'm using a Delta Wasp 20 40", "estimates 4.0 minutes, while the measured printing time is 2 minutes and 40", "I have printed a small pyramid for which Cura estimates 4.0 minutes, while", "for which Cura estimates 4.0 minutes, while the measured printing time is 2", "the measured printing time is 2 minutes and 40 seconds. What reasons could", "Cura, due to acceleration and jerk factor. However, I have printed a small", "equipped with a clay extruder for which parameters such as E-step (for E", "measured printing time is 2 minutes and 40 seconds. What reasons could produce", "by Cura, due to acceleration and jerk factor. However, I have printed a", "have printed a small pyramid for which Cura estimates 4.0 minutes, while the", "Wasp 20 40 equipped with a clay extruder for which parameters such as", "a small pyramid for which Cura estimates 4.0 minutes, while the measured printing", "this difference? For clarity, I'm using a Delta Wasp 20 40 equipped with", "parameters such as E-step (for E axis) are unpredictable since I have no", "2 minutes and 40 seconds. What reasons could produce this difference? For clarity,", "printing time is longer than the time estimated by Cura, due to acceleration", "I know that the actual printing time is longer than the time estimated", "20 40 equipped with a clay extruder for which parameters such as E-step" ]
[ "of revolution defined by two equations, and I want to generate a STL", "or if that is the best way to do this. Solutions do not", "revolution defined by two equations, and I want to generate a STL file", "a way to do this via Wolfram's Development Program but I'm not sure", "this via Wolfram's Development Program but I'm not sure how or if that", "to generate a STL file for printing from the [difference of the two", "is a way to do this via Wolfram's Development Program but I'm not", "printing from the [difference of the two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around x=0. I can", "revolved around x=0. I can get a good visualization when I [query this", "Wolfram's Development Program but I'm not sure how or if that is the", "the two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around x=0. I can get a good visualization when", "of the two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around x=0. I can get a good visualization", "I can get a good visualization when I [query this on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4),", "a solid of revolution defined by two equations, and I want to generate", "defined by two equations, and I want to generate a STL file for", "on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I cannot figure out how to download an STL", "to download an STL of this. I know there is a way to", "want to generate a STL file for printing from the [difference of the", "I cannot figure out how to download an STL of this. I know", "I know there is a way to do this via Wolfram's Development Program", "equations, and I want to generate a STL file for printing from the", "for printing from the [difference of the two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around x=0. I", "cannot figure out how to download an STL of this. I know there", "[query this on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I cannot figure out how to download", "visualization when I [query this on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I cannot figure out", "x=0. I can get a good visualization when I [query this on Wolfram", "to do this via Wolfram's Development Program but I'm not sure how or", "a STL file for printing from the [difference of the two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved", "when I [query this on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I cannot figure out how", "how to download an STL of this. I know there is a way", "from the [difference of the two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around x=0. I can get", "an STL of this. I know there is a way to do this", "not sure how or if that is the best way to do this.", "sure how or if that is the best way to do this. Solutions", "get a good visualization when I [query this on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I", "equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around x=0. I can get a good visualization when I [query", "by two equations, and I want to generate a STL file for printing", "if that is the best way to do this. Solutions do not have", "this. I know there is a way to do this via Wolfram's Development", "two equations, and I want to generate a STL file for printing from", "around x=0. I can get a good visualization when I [query this on", "Program but I'm not sure how or if that is the best way", "do this via Wolfram's Development Program but I'm not sure how or if", "there is a way to do this via Wolfram's Development Program but I'm", "way to do this via Wolfram's Development Program but I'm not sure how", "file for printing from the [difference of the two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around x=0.", "good visualization when I [query this on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I cannot figure", "Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I cannot figure out how to download an STL of this.", "is the best way to do this. Solutions do not have to involve", "can get a good visualization when I [query this on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but", "a good visualization when I [query this on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I cannot", "STL file for printing from the [difference of the two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around", "the best way to do this. Solutions do not have to involve WA.", "but I cannot figure out how to download an STL of this. I", "I have a solid of revolution defined by two equations, and I want", "and I want to generate a STL file for printing from the [difference", "solid of revolution defined by two equations, and I want to generate a", "I want to generate a STL file for printing from the [difference of", "the [difference of the two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around x=0. I can get a", "generate a STL file for printing from the [difference of the two equations](https://www.desmos.com/calculator/eh18uwasw9),", "I [query this on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I cannot figure out how to", "how or if that is the best way to do this. Solutions do", "[difference of the two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around x=0. I can get a good", "download an STL of this. I know there is a way to do", "know there is a way to do this via Wolfram's Development Program but", "of this. I know there is a way to do this via Wolfram's", "have a solid of revolution defined by two equations, and I want to", "that is the best way to do this. Solutions do not have to", "figure out how to download an STL of this. I know there is", "via Wolfram's Development Program but I'm not sure how or if that is", "this on Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I cannot figure out how to download an", "Wolfram Alpha](https://www.wolframalpha.com/input/?i=rotate%20the%20region%20between%20x%3Dsqrt(129%2B12y-y%5E2)-15.858%20and%20x%3Dsqrt(129%2B12y-y%5E2)-16.358%20around%20x%3D0%20from%20y%3D0%20to%20y%3D4), but I cannot figure out how to download an STL of", "out how to download an STL of this. I know there is a", "STL of this. I know there is a way to do this via", "Development Program but I'm not sure how or if that is the best", "but I'm not sure how or if that is the best way to", "two equations](https://www.desmos.com/calculator/eh18uwasw9), revolved around x=0. I can get a good visualization when I", "I'm not sure how or if that is the best way to do" ]
[ "the print, wait for a couple of hours and then use it. Problem", "apply a more tension to the bolt. Can you please advise me on", "that the nut keeps falling out of the print when I apply a", "me on how to make this method work. Maybe some of you aware", "which I've implemented in the design. Right now I apply a conventional super", "a conventional super glue on the nut and press it inside the print,", "the nut keeps falling out of the print when I apply a more", "hours and then use it. Problem is that the nut keeps falling out", "a more tension to the bolt. Can you please advise me on how", "wait for a couple of hours and then use it. Problem is that", "advise me on how to make this method work. Maybe some of you", "to make this method work. Maybe some of you aware of special glue", "implemented in the design. Right now I apply a conventional super glue on", "a threaded metal nut (M4) inside a corresponding slot which I've implemented in", "to the bolt. Can you please advise me on how to make this", "nut (M4) inside a corresponding slot which I've implemented in the design. Right", "when I apply a more tension to the bolt. Can you please advise", "(ABS) together with a threaded connection. Thus, I need to fix a threaded", "Problem is that the nut keeps falling out of the print when I", "press it inside the print, wait for a couple of hours and then", "the print when I apply a more tension to the bolt. Can you", "3D printed parts (ABS) together with a threaded connection. Thus, I need to", "design. Right now I apply a conventional super glue on the nut and", "is that the nut keeps falling out of the print when I apply", "couple of hours and then use it. Problem is that the nut keeps", "I apply a conventional super glue on the nut and press it inside", "trying to connect two 3D printed parts (ABS) together with a threaded connection.", "printed parts (ABS) together with a threaded connection. Thus, I need to fix", "conventional super glue on the nut and press it inside the print, wait", "Can you please advise me on how to make this method work. Maybe", "inside the print, wait for a couple of hours and then use it.", "nut keeps falling out of the print when I apply a more tension", "falling out of the print when I apply a more tension to the", "out of the print when I apply a more tension to the bolt.", "apply a conventional super glue on the nut and press it inside the", "Thus, I need to fix a threaded metal nut (M4) inside a corresponding", "keeps falling out of the print when I apply a more tension to", "please advise me on how to make this method work. Maybe some of", "parts (ABS) together with a threaded connection. Thus, I need to fix a", "print, wait for a couple of hours and then use it. Problem is", "print when I apply a more tension to the bolt. Can you please", "more tension to the bolt. Can you please advise me on how to", "you please advise me on how to make this method work. Maybe some", "two 3D printed parts (ABS) together with a threaded connection. Thus, I need", "slot which I've implemented in the design. Right now I apply a conventional", "method work. Maybe some of you aware of special glue for that purposes?", "on how to make this method work. Maybe some of you aware of", "threaded connection. Thus, I need to fix a threaded metal nut (M4) inside", "corresponding slot which I've implemented in the design. Right now I apply a", "to connect two 3D printed parts (ABS) together with a threaded connection. Thus,", "for a couple of hours and then use it. Problem is that the", "now I apply a conventional super glue on the nut and press it", "the design. Right now I apply a conventional super glue on the nut", "bolt. Can you please advise me on how to make this method work.", "need to fix a threaded metal nut (M4) inside a corresponding slot which", "make this method work. Maybe some of you aware of special glue for", "a threaded connection. Thus, I need to fix a threaded metal nut (M4)", "inside a corresponding slot which I've implemented in the design. Right now I", "in the design. Right now I apply a conventional super glue on the", "together with a threaded connection. Thus, I need to fix a threaded metal", "use it. Problem is that the nut keeps falling out of the print", "it inside the print, wait for a couple of hours and then use", "I've implemented in the design. Right now I apply a conventional super glue", "the bolt. Can you please advise me on how to make this method", "on the nut and press it inside the print, wait for a couple", "I'm trying to connect two 3D printed parts (ABS) together with a threaded", "tension to the bolt. Can you please advise me on how to make", "and press it inside the print, wait for a couple of hours and", "with a threaded connection. Thus, I need to fix a threaded metal nut", "nut and press it inside the print, wait for a couple of hours", "I need to fix a threaded metal nut (M4) inside a corresponding slot", "then use it. Problem is that the nut keeps falling out of the", "glue on the nut and press it inside the print, wait for a", "to fix a threaded metal nut (M4) inside a corresponding slot which I've", "super glue on the nut and press it inside the print, wait for", "how to make this method work. Maybe some of you aware of special", "Right now I apply a conventional super glue on the nut and press", "threaded metal nut (M4) inside a corresponding slot which I've implemented in the", "connection. Thus, I need to fix a threaded metal nut (M4) inside a", "I apply a more tension to the bolt. Can you please advise me", "a corresponding slot which I've implemented in the design. Right now I apply", "this method work. Maybe some of you aware of special glue for that", "of hours and then use it. Problem is that the nut keeps falling", "it. Problem is that the nut keeps falling out of the print when", "and then use it. Problem is that the nut keeps falling out of", "a couple of hours and then use it. Problem is that the nut", "metal nut (M4) inside a corresponding slot which I've implemented in the design.", "fix a threaded metal nut (M4) inside a corresponding slot which I've implemented", "(M4) inside a corresponding slot which I've implemented in the design. Right now", "of the print when I apply a more tension to the bolt. Can", "connect two 3D printed parts (ABS) together with a threaded connection. Thus, I", "the nut and press it inside the print, wait for a couple of" ]
[ "myself having to repair rice cookers and fans in Thailand. In those, it", "thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow upon a current surge, short-circuit, etc. These are [thermal", "should a thermal fuse be placed? There are a number of places to", "fire risk. A well designed 3D printer should be designed to be as", "nor practical. So, some inbuilt safety features should be included, to at least", "are not talking about the standard, replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow upon a", "in the air, to get an average, rather than highly localised temperature? ", "multifuse, polyfuse or polyswitch) 3 Would a thermal fuse be preferable to thermal", "polyfuse or polyswitch) 3 Would a thermal fuse be preferable to thermal cut", "(permanently) at a specific temperature (typically ~135°C), thereby breaking the circuit. 2 Nor", "the air, to get an average, rather than highly localised* temperature? * Against", "this is not always feasible, nor practical. So, some inbuilt safety features should", "fire? 4 The thermal fuses used in rice cookers are the axial type,", "recommendation is, when printing, to watch the 3D printer at all times and", "unattended. However, with some print times lasting hours and days, this is not", "used at all? --- ### Background I have recently found myself having to", "to repair rice cookers and fans in Thailand. In those, it is very", "Of lesser import, which type should one use4, radial or axial? [![Common thermal", "contain metal connector within them that melts (permanently) at a specific temperature (typically", "and the square \"radial\" types for fans) that requires replacing, as they have", "possible, especially one used in the home... Yes, the recommendation is, when printing,", "the risk of fire, to some extent. * Is the use of thermal", "fuse be preferable to thermal cut offs, in the case of fire? 4", "choose from, such as next to: + The hotend? + The heated bed?", "fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC, multifuse, polyfuse or polyswitch) 3 Would a thermal fuse be", "that requires replacing, as they have blown before the device got hot enough", "have blown before the device got hot enough to start a fire. This", "however, the inherent nature of 3D printers, with all of the heated parts,", "often the thermal fuse (axial thermal fuses for the rice cookers and the", "+ The extruder? + Each of the stepper motors? + The power supply?", "particular component, or free standing, in the air, to get an average, rather", "anyone added thermal fuses to their 3D printers? Or has anyone examined where", "some extent. * Is the use of thermal fuses1,2 a good idea3? ", "examined where the thermal fuses are placed in commercial 3D printer designs, if", "### Background I have recently found myself having to repair rice cookers and", "in the home... Yes, the recommendation is, when printing, to watch the 3D", "blow upon a current surge, short-circuit, etc. These are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain", "printer designs, if used at all? --- ### Background I have recently found", "3 Would a thermal fuse be preferable to thermal cut offs, in the", "parts, constitutes a fire risk. A well designed 3D printer should be designed", "should be relatively safe, however, the inherent nature of 3D printers, with all", "for the rice cookers and the square \"radial\" types for fans) that requires", "as they have blown* before the device got hot enough to start a", "a current surge, short-circuit, etc. These are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain metal connector", "constitutes a fire risk. A well designed 3D printer should be designed to", "at all? --- ### Background I have recently found myself having to repair", "referring to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC, multifuse, polyfuse or polyswitch) 3 Would a", "rice cookers and fans in Thailand. In those, it is very often the", "power supply? + The RAMPS stepper motor drivers? * Of lesser import, which", "--- ### Footnotes 1 We are not talking about the standard, replaceable, thermo-fuse,or", "+ Each of the stepper motors? + The power supply? + The RAMPS", "from, such as next to: + The hotend? + The heated bed? +", "cookers and the square \"radial\" types for fans) that requires replacing, as they", "There are a number of places to choose from, such as next to:", "be included, to at least mitigate the risk of fire, to some extent.", "(AKA PPTC, multifuse, polyfuse or polyswitch) 3 Would a thermal fuse be preferable", "3D printer at all times and never leave a print unattended. However, with", "have recently found myself having to repair rice cookers and fans in Thailand.", "a 3D printer. --- ### Footnotes 1 We are not talking about the", "a particular component, or free standing, in the air, to get an average,", "next to: + The hotend? + The heated bed? + The extruder? +", "* Of lesser import, which type should one use4, radial or axial? [![Common", "extent. * Is the use of thermal fuses1,2 a good idea3? * Would", "use more than one? * Where should one place a thermal fuse? Next", "lesser import, which type should one use4, radial or axial? [![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg)", "never leave a print unattended. However, with some print times lasting hours and", "hours and days, this is not always feasible, nor practical. So, some inbuilt", "be preferable to thermal cut offs, in the case of fire? 4 The", "a print unattended. However, with some print times lasting hours and days, this", "thermal fuse be preferable to thermal cut offs, in the case of fire?", "thermal fuse (axial thermal fuses for the rice cookers and the square \"radial\"", "a thermal fuse be placed? There are a number of places to choose", "to some extent. * Is the use of thermal fuses1,2 a good idea3?", "use of thermal fuses1,2 a good idea3? * Would you use more than", "inbuilt safety features should be included, to at least mitigate the risk of", "all? --- ### Background I have recently found myself having to repair rice", "In those, it is very often the thermal fuse (axial thermal fuses for", "if used at all? --- ### Background I have recently found myself having", "printer. --- ### Footnotes 1 We are not talking about the standard, replaceable,", "times and never leave a print unattended. However, with some print times lasting", "some print times lasting hours and days, this is not always feasible, nor", "the thermal fuses are placed in commercial 3D printer designs, if used at", "the case of fire? 4 The thermal fuses used in rice cookers are", "thermal fuse? Next to a particular component, or free standing, in the air,", "printing, to watch the 3D printer at all times and never leave a", "temperature (typically ~135°C), thereby breaking the circuit. 2 Nor am I referring to", "cookers are the axial type, and in the motors of fans are the", "has anyone examined where the thermal fuses are placed in commercial 3D printer", "the square \"radial\" types for fans) that requires replacing, as they have blown", "radial or axial? [![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone added thermal fuses to their", "is very often the thermal fuse (axial thermal fuses for the rice cookers", "watch the 3D printer at all times and never leave a print unattended.", "standing, in the air, to get an average, rather than highly localised* temperature?", "than one? * Where should one place a thermal fuse? Next to a", "to watch the 3D printer at all times and never leave a print", "[![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone added thermal fuses to their 3D printers? Or", "relatively safe, however, the inherent nature of 3D printers, with all of the", "within them that melts (permanently) at a specific temperature (typically ~135°C), thereby breaking", "with some print times lasting hours and days, this is not always feasible,", "and fans in Thailand. In those, it is very often the thermal fuse", "are the axial type, and in the motors of fans are the radial", "The RAMPS stepper motor drivers? * Of lesser import, which type should one", "surge, short-circuit, etc. These are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain metal connector within them", "Would a thermal fuse be preferable to thermal cut offs, in the case", "4 The thermal fuses used in rice cookers are the axial type, and", "axial? [![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone added thermal fuses to their 3D printers?", "about their use in a 3D printer. --- ### Footnotes 1 We are", "than highly localised temperature? * Against which components should a thermal fuse be", "the use of thermal fuses1,2 a good idea3? * Would you use more", "upon a current surge, short-circuit, etc. These are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain metal", "a fire risk. A well designed 3D printer should be designed to be", "more than one? * Where should one place a thermal fuse? Next to", "replacing, as they have blown before the device got hot enough to start", "a number of places to choose from, such as next to: + The", "to at least mitigate the risk of fire, to some extent. * Is", "the 3D printer at all times and never leave a print unattended. However,", "These are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain metal connector within them that melts (permanently)", "thermal fuses1,2 a good idea3? * Would you use more than one? ", "highly localised* temperature? * Against which components should a thermal fuse be placed?", "the standard, replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow upon a current surge, short-circuit, etc.", "safety features should be included, to at least mitigate the risk of fire,", "cut offs, in the case of fire? 4 The thermal fuses used in", "thermal fuses are placed in commercial 3D printer designs, if used at all?", "connector within them that melts (permanently) at a specific temperature (typically ~135°C), thereby", "short-circuit, etc. These are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain metal connector within them that", "to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC, multifuse, polyfuse or polyswitch) 3 Would a thermal", "days, this is not always feasible, nor practical. So, some inbuilt safety features", "motors? + The power supply? + The RAMPS stepper motor drivers? * Of", "I referring to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC, multifuse, polyfuse or polyswitch) 3 Would", "as next to: + The hotend? + The heated bed? + The extruder?", "be placed? There are a number of places to choose from, such as", "all times and never leave a print unattended. However, with some print times", "3D printers? Or has anyone examined where the thermal fuses are placed in", "thermal cut offs, in the case of fire? 4 The thermal fuses used", "place a thermal fuse? Next to a particular component, or free standing, in", "The heated bed? + The extruder? + Each of the stepper motors? +", "supply? + The RAMPS stepper motor drivers? * Of lesser import, which type", "for fans) that requires replacing, as they have blown before the device got", "circuit. 2 Nor am I referring to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC, multifuse, polyfuse", "the heated parts, constitutes a fire risk. A well designed 3D printer should", "me thinking about their use in a 3D printer. --- ### Footnotes 1", "type should one use4, radial or axial? [![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone added", "to be as safe as possible, especially one used in the home... Yes,", "features should be included, to at least mitigate the risk of fire, to", "get an average, rather than highly localised temperature? * Against which components should", "in rice cookers are the axial type, and in the motors of fans", "placed? There are a number of places to choose from, such as next", "you use more than one? * Where should one place a thermal fuse?", "etc. These are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain metal connector within them that melts", "to choose from, such as next to: + The hotend? + The heated", "rice cookers are the axial type, and in the motors of fans are", "be relatively safe, however, the inherent nature of 3D printers, with all of", "some inbuilt safety features should be included, to at least mitigate the risk", "number of places to choose from, such as next to: + The hotend?", "found myself having to repair rice cookers and fans in Thailand. In those,", "PPTC, multifuse, polyfuse or polyswitch) 3 Would a thermal fuse be preferable to", "thermal fuses for the rice cookers and the square \"radial\" types for fans)", "a fire. This got me thinking about their use in a 3D printer.", "to get an average, rather than highly localised temperature? * Against which components", "at all times and never leave a print unattended. However, with some print", "anyone examined where the thermal fuses are placed in commercial 3D printer designs,", "leave a print unattended. However, with some print times lasting hours and days,", "air, to get an average, rather than highly localised temperature? * Against which", "localised* temperature? * Against which components should a thermal fuse be placed? There", "use in a 3D printer. --- ### Footnotes 1 We are not talking", "the recommendation is, when printing, to watch the 3D printer at all times", "fuse? Next to a particular component, or free standing, in the air, to", "where the thermal fuses are placed in commercial 3D printer designs, if used", "We are not talking about the standard, replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow upon", "talking about the standard, replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow upon a current surge,", "Yes, the recommendation is, when printing, to watch the 3D printer at all", "+ The heated bed? + The extruder? + Each of the stepper motors?", "should be included, to at least mitigate the risk of fire, to some", "heated parts, constitutes a fire risk. A well designed 3D printer should be", "designed to be as safe as possible, especially one used in the home...", "designed 3D printer should be designed to be as safe as possible, especially", "home... Yes, the recommendation is, when printing, to watch the 3D printer at", "least mitigate the risk of fire, to some extent. * Is the use", "heated bed? + The extruder? + Each of the stepper motors? + The", "an average, rather than highly localised temperature? * Against which components should a", "[fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow upon a current surge, short-circuit, etc. These are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse)", "fuses are placed in commercial 3D printer designs, if used at all? ---", "fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone added thermal fuses to their 3D printers? Or has anyone", "in Thailand. In those, it is very often the thermal fuse (axial thermal", "thinking about their use in a 3D printer. --- ### Footnotes 1 We", "3D printer should be designed to be as safe as possible, especially one", "to a particular component, or free standing, in the air, to get an", "when printing, to watch the 3D printer at all times and never leave", "melts (permanently) at a specific temperature (typically ~135°C), thereby breaking the circuit. 2", "are a number of places to choose from, such as next to: +", "preferable to thermal cut offs, in the case of fire? 4 The thermal", "rather than highly localised temperature? * Against which components should a thermal fuse", "one used in the home... Yes, the recommendation is, when printing, to watch", "thermal fuse be placed? There are a number of places to choose from,", "idea3? * Would you use more than one? * Where should one place", "used in the home... Yes, the recommendation is, when printing, to watch the", "especially one used in the home... Yes, the recommendation is, when printing, to", "the device got hot enough to start a fire. This got me thinking", "got hot enough to start a fire. This got me thinking about their", "thereby breaking the circuit. 2 Nor am I referring to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA", "nature of 3D printers, with all of the heated parts, constitutes a fire", "import, which type should one use4, radial or axial? [![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has", "3D printer designs, if used at all? --- ### Background I have recently", "printers? Or has anyone examined where the thermal fuses are placed in commercial", "recently found myself having to repair rice cookers and fans in Thailand. In", "very often the thermal fuse (axial thermal fuses for the rice cookers and", "the stepper motors? + The power supply? + The RAMPS stepper motor drivers?", "in commercial 3D printer designs, if used at all? --- ### Background I", "current surge, short-circuit, etc. These are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain metal connector within", "The thermal fuses used in rice cookers are the axial type, and in", "Footnotes 1 We are not talking about the standard, replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which", "* Is the use of thermal fuses1,2 a good idea3? * Would you", "hotend? + The heated bed? + The extruder? + Each of the stepper", "printer at all times and never leave a print unattended. However, with some", "+ The hotend? + The heated bed? + The extruder? + Each of", "stepper motor drivers? * Of lesser import, which type should one use4, radial", "blown before the device got hot enough to start a fire. This got", "Thailand. In those, it is very often the thermal fuse (axial thermal fuses", "added thermal fuses to their 3D printers? Or has anyone examined where the", "Would you use more than one? * Where should one place a thermal", "of fire? 4 The thermal fuses used in rice cookers are the axial", "thermal fuses used in rice cookers are the axial type, and in the", "fuses1,2 a good idea3? * Would you use more than one? * Where", "### Footnotes 1 We are not talking about the standard, replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)),", "the thermal fuse (axial thermal fuses for the rice cookers and the square", "A well designed 3D printer should be designed to be as safe as", "bed? + The extruder? + Each of the stepper motors? + The power", "I have recently found myself having to repair rice cookers and fans in", "with all of the heated parts, constitutes a fire risk. A well designed", "fuses to their 3D printers? Or has anyone examined where the thermal fuses", "those, it is very often the thermal fuse (axial thermal fuses for the", "[resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC, multifuse, polyfuse or polyswitch) 3 Would a thermal fuse", "mitigate the risk of fire, to some extent. * Is the use of", "Is the use of thermal fuses1,2 a good idea3? * Would you use", "hot enough to start a fire. This got me thinking about their use", "is, when printing, to watch the 3D printer at all times and never", "Against which components should a thermal fuse be placed? There are a number", "in a 3D printer. --- ### Footnotes 1 We are not talking about", "to: + The hotend? + The heated bed? + The extruder? + Each", "should be designed to be as safe as possible, especially one used in", "commercial 3D printer designs, if used at all? --- ### Background I have", "a good idea3? * Would you use more than one? * Where should", "repair rice cookers and fans in Thailand. In those, it is very often", "3D printer. --- ### Footnotes 1 We are not talking about the standard,", "to their 3D printers? Or has anyone examined where the thermal fuses are", "inherent nature of 3D printers, with all of the heated parts, constitutes a", "fuses for the rice cookers and the square \"radial\" types for fans) that", "be designed to be as safe as possible, especially one used in the", "+ The RAMPS stepper motor drivers? * Of lesser import, which type should", "* Would you use more than one? * Where should one place a", "fuse be placed? There are a number of places to choose from, such", "risk of fire, to some extent. * Is the use of thermal fuses1,2", "they have blown before the device got hot enough to start a fire.", "included, to at least mitigate the risk of fire, to some extent. ", "Has anyone added thermal fuses to their 3D printers? Or has anyone examined", "which blow upon a current surge, short-circuit, etc. These are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that", "temperature? Against which components should a thermal fuse be placed? There are", "square \"radial\" types for fans) that requires replacing, as they have blown before", "about the standard, replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow upon a current surge, short-circuit,", "the rice cookers and the square \"radial\" types for fans) that requires replacing,", "(axial thermal fuses for the rice cookers and the square \"radial\" types for", "3D printers, with all of the heated parts, constitutes a fire risk. A", "or axial? [![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone added thermal fuses to their 3D", "before the device got hot enough to start a fire. This got me", "well designed 3D printer should be designed to be as safe as possible,", "at least mitigate the risk of fire, to some extent. * Is the", "are placed in commercial 3D printer designs, if used at all? --- ###", "use4, radial or axial? [![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone added thermal fuses to", "it is very often the thermal fuse (axial thermal fuses for the rice", "breaking the circuit. 2 Nor am I referring to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC,", "Where should one place a thermal fuse? Next to a particular component, or", "* Where should one place a thermal fuse? Next to a particular component,", "places to choose from, such as next to: + The hotend? + The", "However, with some print times lasting hours and days, this is not always", "fans) that requires replacing, as they have blown before the device got hot", "to thermal cut offs, in the case of fire? 4 The thermal fuses", "fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain metal connector within them that melts (permanently) at a specific", "of 3D printers, with all of the heated parts, constitutes a fire risk.", "The power supply? + The RAMPS stepper motor drivers? * Of lesser import,", "one place a thermal fuse? Next to a particular component, or free standing,", "feasible, nor practical. So, some inbuilt safety features should be included, to at", "a thermal fuse be preferable to thermal cut offs, in the case of", "motor drivers? * Of lesser import, which type should one use4, radial or", "placed in commercial 3D printer designs, if used at all? --- ### Background", "not always feasible, nor practical. So, some inbuilt safety features should be included,", "The extruder? + Each of the stepper motors? + The power supply? +", "that contain metal connector within them that melts (permanently) at a specific temperature", "Nor am I referring to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC, multifuse, polyfuse or polyswitch)", "requires replacing, as they have blown before the device got hot enough to", "the home... Yes, the recommendation is, when printing, to watch the 3D printer", "RAMPS stepper motor drivers? * Of lesser import, which type should one use4,", "one use4, radial or axial? [![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone added thermal fuses", "printer should be designed to be as safe as possible, especially one used", "fuse (axial thermal fuses for the rice cookers and the square \"radial\" types", "should one use4, radial or axial? [![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone added thermal", "them that melts (permanently) at a specific temperature (typically ~135°C), thereby breaking the", "(typically ~135°C), thereby breaking the circuit. 2 Nor am I referring to [resettable", "start a fire. This got me thinking about their use in a 3D", "components should a thermal fuse be placed? There are a number of places", "that melts (permanently) at a specific temperature (typically ~135°C), thereby breaking the circuit.", "component, or free standing, in the air, to get an average, rather than", "~135°C), thereby breaking the circuit. 2 Nor am I referring to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse)", "So, some inbuilt safety features should be included, to at least mitigate the", "which components should a thermal fuse be placed? There are a number of", "Background I have recently found myself having to repair rice cookers and fans", "always feasible, nor practical. So, some inbuilt safety features should be included, to", "fire. This got me thinking about their use in a 3D printer. ---", "printers, with all of the heated parts, constitutes a fire risk. A well", "of fire, to some extent. * Is the use of thermal fuses1,2 a", "designs, if used at all? --- ### Background I have recently found myself", "and days, this is not always feasible, nor practical. So, some inbuilt safety", "to start a fire. This got me thinking about their use in a", "not talking about the standard, replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow upon a current", "safe as possible, especially one used in the home... Yes, the recommendation is,", "got me thinking about their use in a 3D printer. --- ### Footnotes", "thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone added thermal fuses to their 3D printers? Or has", "be as safe as possible, especially one used in the home... Yes, the", "fire, to some extent. * Is the use of thermal fuses1,2 a good", "+ The power supply? + The RAMPS stepper motor drivers? * Of lesser", "2 Nor am I referring to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC, multifuse, polyfuse or", "all of the heated parts, constitutes a fire risk. A well designed 3D", "thermal fuses to their 3D printers? Or has anyone examined where the thermal", "are [thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain metal connector within them that melts (permanently) at", "the inherent nature of 3D printers, with all of the heated parts, constitutes", "Next to a particular component, or free standing, in the air, to get", "practical. So, some inbuilt safety features should be included, to at least mitigate", "types for fans) that requires replacing, as they have blown before the device", "and never leave a print unattended. However, with some print times lasting hours", "the circuit. 2 Nor am I referring to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC, multifuse,", "standard, replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow upon a current surge, short-circuit, etc. These", "--- ### Background I have recently found myself having to repair rice cookers", "average, rather than highly localised temperature? * Against which components should a thermal", "of places to choose from, such as next to: + The hotend? +", "of the stepper motors? + The power supply? + The RAMPS stepper motor", "their 3D printers? Or has anyone examined where the thermal fuses are placed", "[thermal fuses](https://en.wikipedia.org/wiki/Thermal_cutoff#Thermal_fuse) that contain metal connector within them that melts (permanently) at a", "as possible, especially one used in the home... Yes, the recommendation is, when", "metal connector within them that melts (permanently) at a specific temperature (typically ~135°C),", "specific temperature (typically ~135°C), thereby breaking the circuit. 2 Nor am I referring", "should one place a thermal fuse? Next to a particular component, or free", "Or has anyone examined where the thermal fuses are placed in commercial 3D", "case of fire? 4 The thermal fuses used in rice cookers are the", "offs, in the case of fire? 4 The thermal fuses used in rice", "fuses used in rice cookers are the axial* type, and in the motors", "times lasting hours and days, this is not always feasible, nor practical. So,", "such as next to: + The hotend? + The heated bed? + The", "having to repair rice cookers and fans in Thailand. In those, it is", "rice cookers and the square \"radial\" types for fans) that requires replacing, as", "risk. A well designed 3D printer should be designed to be as safe", "or free standing, in the air, to get an average, rather than highly", "am I referring to [resettable fuses](https://en.wikipedia.org/wiki/Resettable_fuse) (AKA PPTC, multifuse, polyfuse or polyswitch) 3", "print unattended. However, with some print times lasting hours and days, this is", "is not always feasible, nor practical. So, some inbuilt safety features should be", "1 We are not* talking about the standard, replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow", "cookers and fans in Thailand. In those, it is very often the thermal", "good idea3? * Would you use more than one? * Where should one", "lasting hours and days, this is not always feasible, nor practical. So, some", "Each of the stepper motors? + The power supply? + The RAMPS stepper", "which type should one use4, radial or axial? [![Common thermal fuses](https://i.stack.imgur.com/RDeIh.jpg)](https://i.stack.imgur.com/RDeIh.jpg) Has anyone", "polyswitch) 3 Would a thermal fuse be preferable to thermal cut offs, in", "stepper motors? + The power supply? + The RAMPS stepper motor drivers? ", "This got me thinking about their use in a 3D printer. --- ###", "of the heated parts, constitutes a fire risk. A well designed 3D printer", "one? Where should one place a thermal fuse? Next to a particular", "of thermal fuses1,2 a good idea3? * Would you use more than one?", "safe, however, the inherent nature of 3D printers, with all of the heated", "enough to start a fire. This got me thinking about their use in", "or polyswitch) 3 Would a thermal fuse be preferable to thermal cut offs,", "in the case of fire? 4 The thermal fuses used in rice cookers", "fans in Thailand. In those, it is very often the thermal fuse (axial", "a specific temperature (typically ~135°C), thereby breaking the circuit. 2 Nor am I", "\"radial\" types for fans) that requires replacing, as they have blown before the", "at a specific temperature (typically ~135°C), thereby breaking the circuit. 2 Nor am", "replaceable, thermo-fuse,or [fuse](https://en.wikipedia.org/wiki/Fuse_(electrical)), which blow upon a current surge, short-circuit, etc. These are", "extruder? + Each of the stepper motors? + The power supply? + The", "drivers? * Of lesser import, which type should one use4, radial or axial?", "free standing, in the air, to get an average, rather than highly localised", "used in rice cookers are the axial type, and in the motors of", "* Against which components should a thermal fuse be placed? There are a", "print times lasting hours and days, this is not always feasible, nor practical.", "as safe as possible, especially one used in the home... Yes, the recommendation", "the axial type, and in the motors of fans are the radial type.", "their use in a 3D printer. --- ### Footnotes 1 We are not", "The hotend? + The heated bed? + The extruder? + Each of the", "printing should be relatively safe, however, the inherent nature of 3D printers, with", "device got hot enough to start a fire. This got me thinking about", "3D printing should be relatively safe, however, the inherent nature of 3D printers,", "a thermal fuse? Next to a particular component, or free standing, in the" ]
[ "For such a popular open-source product, I was surprised I couldn't find a", "popular open-source product, I was surprised I couldn't find a build guide. Can", "I have found the [repository](https://github.com/Ultimaker/Cura) and have cloned it to my PC. I", "of experience in Software Development (more years and languages than I want to", "have cloned it to my PC. I have also looked over the [Wiki](https://github.com/Ultimaker/Cura/wiki)", "in Software Development (more years and languages than I want to admit to);", "open-source product, I was surprised I couldn't find a build guide. Can someone", "I was surprised I couldn't find a build guide. Can someone direct me", "was surprised I couldn't find a build guide. Can someone direct me on", "on how to get started. I have a LOT of experience in Software", "have a LOT of experience in Software Development (more years and languages than", "Initially I want to start with the UI rather than the Engine. I", "LOT of experience in Software Development (more years and languages than I want", "want to admit to); but, I have never used Python. Consider that in", "cloned it to my PC. I have also looked over the [Wiki](https://github.com/Ultimaker/Cura/wiki) and", "than the Engine. I have found the [repository](https://github.com/Ultimaker/Cura) and have cloned it to", "surprised I couldn't find a build guide. Can someone direct me on how", "I have a LOT of experience in Software Development (more years and languages", "Engine. I have found the [repository](https://github.com/Ultimaker/Cura) and have cloned it to my PC.", "guide. Can someone direct me on how to get started. I have a", "I am interested in doing development on Cura. Initially I want to start", "Cura. Initially I want to start with the UI rather than the Engine.", "in doing development on Cura. Initially I want to start with the UI", "looked over the [Wiki](https://github.com/Ultimaker/Cura/wiki) and searched the web. For such a popular open-source", "couldn't find a build guide. Can someone direct me on how to get", "to get started. I have a LOT of experience in Software Development (more", "me on how to get started. I have a LOT of experience in", "[Wiki](https://github.com/Ultimaker/Cura/wiki) and searched the web. For such a popular open-source product, I was", "I couldn't find a build guide. Can someone direct me on how to", "a build guide. Can someone direct me on how to get started. I", "I want to admit to); but, I have never used Python. Consider that", "my PC. I have also looked over the [Wiki](https://github.com/Ultimaker/Cura/wiki) and searched the web.", "to my PC. I have also looked over the [Wiki](https://github.com/Ultimaker/Cura/wiki) and searched the", "development on Cura. Initially I want to start with the UI rather than", "have also looked over the [Wiki](https://github.com/Ultimaker/Cura/wiki) and searched the web. For such a", "interested in doing development on Cura. Initially I want to start with the", "product, I was surprised I couldn't find a build guide. Can someone direct", "the [repository](https://github.com/Ultimaker/Cura) and have cloned it to my PC. I have also looked", "the [Wiki](https://github.com/Ultimaker/Cura/wiki) and searched the web. For such a popular open-source product, I", "start with the UI rather than the Engine. I have found the [repository](https://github.com/Ultimaker/Cura)", "Development (more years and languages than I want to admit to); but, I", "to admit to); but, I have never used Python. Consider that in your", "on Cura. Initially I want to start with the UI rather than the", "[repository](https://github.com/Ultimaker/Cura) and have cloned it to my PC. I have also looked over", "admit to); but, I have never used Python. Consider that in your instructions.", "such a popular open-source product, I was surprised I couldn't find a build", "than I want to admit to); but, I have never used Python. Consider", "with the UI rather than the Engine. I have found the [repository](https://github.com/Ultimaker/Cura) and", "over the [Wiki](https://github.com/Ultimaker/Cura/wiki) and searched the web. For such a popular open-source product,", "am interested in doing development on Cura. Initially I want to start with", "years and languages than I want to admit to); but, I have never", "rather than the Engine. I have found the [repository](https://github.com/Ultimaker/Cura) and have cloned it", "the web. For such a popular open-source product, I was surprised I couldn't", "and searched the web. For such a popular open-source product, I was surprised", "(more years and languages than I want to admit to); but, I have", "and have cloned it to my PC. I have also looked over the", "have found the [repository](https://github.com/Ultimaker/Cura) and have cloned it to my PC. I have", "I have also looked over the [Wiki](https://github.com/Ultimaker/Cura/wiki) and searched the web. For such", "a LOT of experience in Software Development (more years and languages than I", "build guide. Can someone direct me on how to get started. I have", "UI rather than the Engine. I have found the [repository](https://github.com/Ultimaker/Cura) and have cloned", "I want to start with the UI rather than the Engine. I have", "also looked over the [Wiki](https://github.com/Ultimaker/Cura/wiki) and searched the web. For such a popular", "searched the web. For such a popular open-source product, I was surprised I", "direct me on how to get started. I have a LOT of experience", "experience in Software Development (more years and languages than I want to admit", "someone direct me on how to get started. I have a LOT of", "found the [repository](https://github.com/Ultimaker/Cura) and have cloned it to my PC. I have also", "languages than I want to admit to); but, I have never used Python.", "the Engine. I have found the [repository](https://github.com/Ultimaker/Cura) and have cloned it to my", "doing development on Cura. Initially I want to start with the UI rather", "the UI rather than the Engine. I have found the [repository](https://github.com/Ultimaker/Cura) and have", "how to get started. I have a LOT of experience in Software Development", "web. For such a popular open-source product, I was surprised I couldn't find", "Can someone direct me on how to get started. I have a LOT", "to start with the UI rather than the Engine. I have found the", "and languages than I want to admit to); but, I have never used", "find a build guide. Can someone direct me on how to get started.", "want to start with the UI rather than the Engine. I have found", "PC. I have also looked over the [Wiki](https://github.com/Ultimaker/Cura/wiki) and searched the web. For", "it to my PC. I have also looked over the [Wiki](https://github.com/Ultimaker/Cura/wiki) and searched", "started. I have a LOT of experience in Software Development (more years and", "a popular open-source product, I was surprised I couldn't find a build guide.", "Software Development (more years and languages than I want to admit to); but,", "get started. I have a LOT of experience in Software Development (more years" ]
[ "infill from 10-90% the first layer would not stick or it would print", "A8 printer for about two months now and still have not gotten it", "with two bubble effects\") In the top picture you can also how the", "print the first layers for anything well but once it gets up about", "20% * Grid Pattern * Print Temp 210°C * Bed Temp 65°C ", "anything well but once it gets up about 10-ish layers it prints perfectly.", "prints. At first, it would only print completely solid parts and every time", "months now and still have not gotten it to print good prints. At", "a little better) Any suggestions? [![Photo of 3D print, showing top layer with", "it to print good prints. At first, it would only print completely solid", "Density 20% Grid Pattern * Print Temp 210°C * Bed Temp 65°C", "quality), the print is supposed to be a 10 mm square. I have", "Height 0.1 mm * In. Layer Height 0.3 mm * WallThicken 0.8 mm", "up about 10-ish layers it prints perfectly. I have tried a lot of", "settings because nothing else was working. * Using blue painter's tape * Layer", "\"Photo of 3D print, showing top layer with two bubble effects\") In the", "layer with two bubble effects\") In the top picture you can also how", "solid parts and every time I would try infill from 10-90% the first", "print completely solid parts and every time I would try infill from 10-90%", "As of now, it won't print the first layers for anything well but", "tape * Layer Height 0.1 mm * In. Layer Height 0.3 mm ", "attempt at these settings below (Cura's default for normal quality), the print is", "I have had an Anet A8 printer for about two months now and", "to be a 10 mm square. I have gone back to the default", "3D print, showing top layer with two bubble effects\") In the top picture", "and still have not gotten it to print good prints. At first, it", "would not stick or it would print really filmy like. As of now,", "now, it won't print the first layers for anything well but once it", "with two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer with two", "print, showing top layer with two bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing", "stuff but it seems to be making it worse. The pictures show my", "was working. Using blue painter's tape * Layer Height 0.1 mm ", "have tried a lot of stuff but it seems to be making it", "top layer has two bubble effects. [![3D Print with brim](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print with", "be a 10 mm square. I have gone back to the default settings", "(Cura's default for normal quality), the print is supposed to be a 10", "completely solid parts and every time I would try infill from 10-90% the", "showing top layer with two bubble effects\") In the top picture you can", "seems to be making it worse. The pictures show my recent attempt at", "it would only print completely solid parts and every time I would try", "layers it prints perfectly. I have tried a lot of stuff but it", "Layer Height 0.3 mm WallThicken 0.8 mm * Top/Bottom Thick 0.8 mm", "I would try infill from 10-90% the first layer would not stick or", "3D print, showing top layer with two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print,", "In. Layer Height 0.3 mm * WallThicken 0.8 mm * Top/Bottom Thick 0.8", "like. As of now, it won't print the first layers for anything well", "painter's tape * Layer Height 0.1 mm * In. Layer Height 0.3 mm", "default settings because nothing else was working. * Using blue painter's tape ", "has two bubble effects. [![3D Print with brim](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print with brim\")](https://i.stack.imgur.com/N0ZT3.jpg \"3D", "print, showing top layer with two bubble effects\") In the top picture you", "layers for anything well but once it gets up about 10-ish layers it", "10-90% the first layer would not stick or it would print really filmy", "0.8 mm Top/Bottom Thick 0.8 mm * Infill Density 20% * Grid", "filmy like. As of now, it won't print the first layers for anything", "top picture you can also how the top layer has two bubble effects.", "well but once it gets up about 10-ish layers it prints perfectly. I", "gets up about 10-ish layers it prints perfectly. I have tried a lot", "default for normal quality), the print is supposed to be a 10 mm", "bubble effects\") In the top picture you can also how the top layer", "100% * Bcit (raft is a little better) Any suggestions? [![Photo of 3D", "and every time I would try infill from 10-90% the first layer would", "about 10-ish layers it prints perfectly. I have tried a lot of stuff", "* Dia 1.75 mm * Flow 100% * Bcit (raft is a little", "the default settings because nothing else was working. * Using blue painter's tape", "Pattern * Print Temp 210°C * Bed Temp 65°C * Dia 1.75 mm", "At first, it would only print completely solid parts and every time I", "parts and every time I would try infill from 10-90% the first layer", "effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer with two bubble effects\") In", "to the default settings because nothing else was working. * Using blue painter's", "* Layer Height 0.1 mm * In. Layer Height 0.3 mm * WallThicken", "but once it gets up about 10-ish layers it prints perfectly. I have", "two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer with two bubble", "back to the default settings because nothing else was working. * Using blue", "it would print really filmy like. As of now, it won't print the", "recent attempt at these settings below (Cura's default for normal quality), the print", "these settings below (Cura's default for normal quality), the print is supposed to", "two bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer with two bubble", "of 3D print, showing top layer with two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D", "once it gets up about 10-ish layers it prints perfectly. I have tried", "can also how the top layer has two bubble effects. [![3D Print with", "at these settings below (Cura's default for normal quality), the print is supposed", "effects\") In the top picture you can also how the top layer has", "lot of stuff but it seems to be making it worse. The pictures", "stick or it would print really filmy like. As of now, it won't", "a lot of stuff but it seems to be making it worse. The", "210°C * Bed Temp 65°C * Dia 1.75 mm * Flow 100% ", "top layer with two bubble effects\") In the top picture you can also", "Thick 0.8 mm Infill Density 20% * Grid Pattern * Print Temp", "better) Any suggestions? [![Photo of 3D print, showing top layer with two bubble", "from 10-90% the first layer would not stick or it would print really", "top layer with two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer", "the top layer has two bubble effects. [![3D Print with brim](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print", "Top/Bottom Thick 0.8 mm * Infill Density 20% * Grid Pattern * Print", "supposed to be a 10 mm square. I have gone back to the", "layer with two bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer with", "it gets up about 10-ish layers it prints perfectly. I have tried a", "not stick or it would print really filmy like. As of now, it", "* Flow 100% * Bcit (raft is a little better) Any suggestions? [![Photo", "effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer with two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo", "only print completely solid parts and every time I would try infill from", "Anet A8 printer for about two months now and still have not gotten", "but it seems to be making it worse. The pictures show my recent", "Layer Height 0.1 mm * In. Layer Height 0.3 mm * WallThicken 0.8", "would print really filmy like. As of now, it won't print the first", "it seems to be making it worse. The pictures show my recent attempt", "it won't print the first layers for anything well but once it gets", "print good prints. At first, it would only print completely solid parts and", "would try infill from 10-90% the first layer would not stick or it", "two bubble effects\") In the top picture you can also how the top", "an Anet A8 printer for about two months now and still have not", "In the top picture you can also how the top layer has two", "Flow 100% * Bcit (raft is a little better) Any suggestions? [![Photo of", "try infill from 10-90% the first layer would not stick or it would", "every time I would try infill from 10-90% the first layer would not", "of 3D print, showing top layer with two bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D", "1.75 mm * Flow 100% * Bcit (raft is a little better) Any", "have gone back to the default settings because nothing else was working. ", "effects. [![3D Print with brim](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print with brim\")](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print with brim\")", "mm WallThicken 0.8 mm * Top/Bottom Thick 0.8 mm * Infill Density", "how the top layer has two bubble effects. [![3D Print with brim](https://i.stack.imgur.com/N0ZT3.jpg \"3D", "now and still have not gotten it to print good prints. At first,", "worse. The pictures show my recent attempt at these settings below (Cura's default", "prints perfectly. I have tried a lot of stuff but it seems to", "mm square. I have gone back to the default settings because nothing else", "bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer with two bubble effects\")", "0.1 mm * In. Layer Height 0.3 mm * WallThicken 0.8 mm ", " In. Layer Height 0.3 mm * WallThicken 0.8 mm * Top/Bottom Thick", "the first layers for anything well but once it gets up about 10-ish", "I have tried a lot of stuff but it seems to be making", "nothing else was working. * Using blue painter's tape * Layer Height 0.1", "10-ish layers it prints perfectly. I have tried a lot of stuff but", "tried a lot of stuff but it seems to be making it worse.", "I have gone back to the default settings because nothing else was working.", "gone back to the default settings because nothing else was working. * Using", "* Using blue painter's tape * Layer Height 0.1 mm * In. Layer", "the print is supposed to be a 10 mm square. I have gone", "[![Photo of 3D print, showing top layer with two bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of", "for normal quality), the print is supposed to be a 10 mm square.", "about two months now and still have not gotten it to print good", "it worse. The pictures show my recent attempt at these settings below (Cura's", "a 10 mm square. I have gone back to the default settings because", "0.3 mm * WallThicken 0.8 mm * Top/Bottom Thick 0.8 mm * Infill", "really filmy like. As of now, it won't print the first layers for", "the top picture you can also how the top layer has two bubble", "print is supposed to be a 10 mm square. I have gone back", "blue painter's tape * Layer Height 0.1 mm * In. Layer Height 0.3", "show my recent attempt at these settings below (Cura's default for normal quality),", "won't print the first layers for anything well but once it gets up", "normal quality), the print is supposed to be a 10 mm square. I", "* WallThicken 0.8 mm * Top/Bottom Thick 0.8 mm * Infill Density 20%", "showing top layer with two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top", "of stuff but it seems to be making it worse. The pictures show", "Print Temp 210°C * Bed Temp 65°C * Dia 1.75 mm * Flow", "with two bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer with two", "Any suggestions? [![Photo of 3D print, showing top layer with two bubble effects](https://i.stack.imgur.com/uQMNN.jpg", "layer with two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer with", "still have not gotten it to print good prints. At first, it would", "* Bed Temp 65°C * Dia 1.75 mm * Flow 100% * Bcit", "of 3D print, showing top layer with two bubble effects\") In the top", "suggestions? [![Photo of 3D print, showing top layer with two bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo", "layer would not stick or it would print really filmy like. As of", "first layer would not stick or it would print really filmy like. As", "or it would print really filmy like. As of now, it won't print", "you can also how the top layer has two bubble effects. [![3D Print", "mm * Infill Density 20% * Grid Pattern * Print Temp 210°C ", "Temp 210°C Bed Temp 65°C * Dia 1.75 mm * Flow 100%", "for anything well but once it gets up about 10-ish layers it prints", "below (Cura's default for normal quality), the print is supposed to be a", "WallThicken 0.8 mm * Top/Bottom Thick 0.8 mm * Infill Density 20% ", "else was working. Using blue painter's tape * Layer Height 0.1 mm", "(raft is a little better) Any suggestions? [![Photo of 3D print, showing top", "3D print, showing top layer with two bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print,", "making it worse. The pictures show my recent attempt at these settings below", "time I would try infill from 10-90% the first layer would not stick", "Bed Temp 65°C * Dia 1.75 mm * Flow 100% * Bcit (raft", "first, it would only print completely solid parts and every time I would", "settings below (Cura's default for normal quality), the print is supposed to be", "* Print Temp 210°C * Bed Temp 65°C * Dia 1.75 mm ", "perfectly. I have tried a lot of stuff but it seems to be", "be making it worse. The pictures show my recent attempt at these settings", "layer has two bubble effects. [![3D Print with brim](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print with brim\")](https://i.stack.imgur.com/N0ZT3.jpg", "is supposed to be a 10 mm square. I have gone back to", "working. Using blue painter's tape * Layer Height 0.1 mm * In.", "mm * In. Layer Height 0.3 mm * WallThicken 0.8 mm * Top/Bottom", "* Top/Bottom Thick 0.8 mm * Infill Density 20% * Grid Pattern ", " Infill Density 20% * Grid Pattern * Print Temp 210°C * Bed", "Temp 65°C * Dia 1.75 mm * Flow 100% * Bcit (raft is", "mm * Flow 100% * Bcit (raft is a little better) Any suggestions?", "showing top layer with two bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top", "10 mm square. I have gone back to the default settings because nothing", "of now, it won't print the first layers for anything well but once", "two months now and still have not gotten it to print good prints.", "* Grid Pattern * Print Temp 210°C * Bed Temp 65°C * Dia", "have not gotten it to print good prints. At first, it would only", "\"Photo of 3D print, showing top layer with two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of", "it prints perfectly. I have tried a lot of stuff but it seems", "mm * Top/Bottom Thick 0.8 mm * Infill Density 20% * Grid Pattern", "not gotten it to print good prints. At first, it would only print", "Height 0.3 mm * WallThicken 0.8 mm * Top/Bottom Thick 0.8 mm ", "printer for about two months now and still have not gotten it to", "little better) Any suggestions? [![Photo of 3D print, showing top layer with two", "print really filmy like. As of now, it won't print the first layers", "pictures show my recent attempt at these settings below (Cura's default for normal", "my recent attempt at these settings below (Cura's default for normal quality), the", "first layers for anything well but once it gets up about 10-ish layers", "Bcit (raft is a little better) Any suggestions? [![Photo of 3D print, showing", "for about two months now and still have not gotten it to print", "bubble effects. [![3D Print with brim](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print with brim\")](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print with", " Bcit (raft is a little better) Any suggestions? [![Photo of 3D print,", "bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer with two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg", "picture you can also how the top layer has two bubble effects. [![3D", "because nothing else was working. * Using blue painter's tape * Layer Height", "The pictures show my recent attempt at these settings below (Cura's default for", "have had an Anet A8 printer for about two months now and still", "good prints. At first, it would only print completely solid parts and every", "two bubble effects. [![3D Print with brim](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print with brim\")](https://i.stack.imgur.com/N0ZT3.jpg \"3D Print", "top layer with two bubble effects](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing top layer", "also how the top layer has two bubble effects. [![3D Print with brim](https://i.stack.imgur.com/N0ZT3.jpg", "Grid Pattern * Print Temp 210°C * Bed Temp 65°C * Dia 1.75", "had an Anet A8 printer for about two months now and still have", "to be making it worse. The pictures show my recent attempt at these", "0.8 mm * Infill Density 20% * Grid Pattern * Print Temp 210°C", "gotten it to print good prints. At first, it would only print completely", "Infill Density 20% * Grid Pattern * Print Temp 210°C * Bed Temp", "would only print completely solid parts and every time I would try infill", "print, showing top layer with two bubble effects\")](https://i.stack.imgur.com/uQMNN.jpg \"Photo of 3D print, showing", "65°C * Dia 1.75 mm * Flow 100% * Bcit (raft is a", "square. I have gone back to the default settings because nothing else was", "Using blue painter's tape * Layer Height 0.1 mm * In. Layer Height", "Dia 1.75 mm * Flow 100% * Bcit (raft is a little better)", "is a little better) Any suggestions? [![Photo of 3D print, showing top layer", "the first layer would not stick or it would print really filmy like.", "to print good prints. At first, it would only print completely solid parts" ]
[ "in my country, and I cannot get it. What substitute could I use?", "Acetone is banned in my country, and I cannot get it. What substitute", "is banned in my country, and I cannot get it. What substitute could", "banned in my country, and I cannot get it. What substitute could I" ]
[ "significant effort to remove the yellow ABS supports from a black ABS model.", "3D-printing filament which is soluble in water. It seems like a great option", "can print the model with ABS or PLA and the supports with PVA,", "a great option for dual-extruder printers, where you can print the model with", "effort to remove the yellow ABS supports from a black ABS model. [![Yellow", "in water. It seems like a great option for dual-extruder printers, where you", "to remove (physically) when I print with ABS. The image below, from [Thingiverse", "seems like a great option for dual-extruder printers, where you can print the", "as a 3D-printing filament which is soluble in water. It seems like a", "I print with ABS. The image below, from [Thingiverse - MOF-5 unit cell](https://www.thingiverse.com/thing:1613957),", "black ABS model. [![Yellow ABS supports removed from black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned", "with acetone, is my best idea currently. Has anyone found success with another", "is soluble in water. It seems like a great option for dual-extruder printers,", "Doing a PLA print with ABS supports, followed by dissolution of ABS with", "filament which is soluble in water. It seems like a great option for", "acetone, is my best idea currently. Has anyone found success with another option?", "a black ABS model. [![Yellow ABS supports removed from black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've", "PVA is ~4x more expensive than ABS. Doing a PLA print with ABS", "black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned about polyvinylalcohol (PVA) as a 3D-printing filament which", "print with ABS supports, followed by dissolution of ABS with acetone, is my", "with ABS supports, followed by dissolution of ABS with acetone, is my best", "are very difficult to remove (physically) when I print with ABS. The image", "difficult to remove (physically) when I print with ABS. The image below, from", "very difficult to remove (physically) when I print with ABS. The image below,", "water and let the supports dissolve. I've considered other options since PVA is", "ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned about polyvinylalcohol (PVA) as a 3D-printing filament which is", "supports from a black ABS model. [![Yellow ABS supports removed from black ABS", "to remove the yellow ABS supports from a black ABS model. [![Yellow ABS", "great option for dual-extruder printers, where you can print the model with ABS", "with ABS or PLA and the supports with PVA, then throw the whole", "It seems like a great option for dual-extruder printers, where you can print", "the supports with PVA, then throw the whole thing in water and let", "let the supports dissolve. I've considered other options since PVA is ~4x more", "which is soluble in water. It seems like a great option for dual-extruder", "from black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned about polyvinylalcohol (PVA) as a 3D-printing filament", "remove the yellow ABS supports from a black ABS model. [![Yellow ABS supports", "supports with PVA, then throw the whole thing in water and let the", "dissolve. I've considered other options since PVA is ~4x more expensive than ABS.", "[Thingiverse - MOF-5 unit cell](https://www.thingiverse.com/thing:1613957), is after significant effort to remove the yellow", "other options since PVA is ~4x more expensive than ABS. Doing a PLA", "~4x more expensive than ABS. Doing a PLA print with ABS supports, followed", "supports, followed by dissolution of ABS with acetone, is my best idea currently.", "expensive than ABS. Doing a PLA print with ABS supports, followed by dissolution", "followed by dissolution of ABS with acetone, is my best idea currently. Has", "model with ABS or PLA and the supports with PVA, then throw the", "I've learned about polyvinylalcohol (PVA) as a 3D-printing filament which is soluble in", "about polyvinylalcohol (PVA) as a 3D-printing filament which is soluble in water. It", "ABS supports from a black ABS model. [![Yellow ABS supports removed from black", "is after significant effort to remove the yellow ABS supports from a black", "learned about polyvinylalcohol (PVA) as a 3D-printing filament which is soluble in water.", "when I print with ABS. The image below, from [Thingiverse - MOF-5 unit", "dual-extruder printers, where you can print the model with ABS or PLA and", "(physically) when I print with ABS. The image below, from [Thingiverse - MOF-5", "considered other options since PVA is ~4x more expensive than ABS. Doing a", "and let the supports dissolve. I've considered other options since PVA is ~4x", "supports are very difficult to remove (physically) when I print with ABS. The", "with PVA, then throw the whole thing in water and let the supports", "the model with ABS or PLA and the supports with PVA, then throw", "PVA, then throw the whole thing in water and let the supports dissolve.", "PLA and the supports with PVA, then throw the whole thing in water", "options since PVA is ~4x more expensive than ABS. Doing a PLA print", "The image below, from [Thingiverse - MOF-5 unit cell](https://www.thingiverse.com/thing:1613957), is after significant effort", "model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned about polyvinylalcohol (PVA) as a 3D-printing filament which is soluble", "for dual-extruder printers, where you can print the model with ABS or PLA", "soluble in water. It seems like a great option for dual-extruder printers, where", "print the model with ABS or PLA and the supports with PVA, then", "ABS with acetone, is my best idea currently. Has anyone found success with", "water. It seems like a great option for dual-extruder printers, where you can", "whole thing in water and let the supports dissolve. I've considered other options", "or PLA and the supports with PVA, then throw the whole thing in", "(PVA) as a 3D-printing filament which is soluble in water. It seems like", "from a black ABS model. [![Yellow ABS supports removed from black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png)", "the whole thing in water and let the supports dissolve. I've considered other", "in water and let the supports dissolve. I've considered other options since PVA", "since PVA is ~4x more expensive than ABS. Doing a PLA print with", "Sometimes supports are very difficult to remove (physically) when I print with ABS.", "ABS model. [![Yellow ABS supports removed from black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned about", "unit cell](https://www.thingiverse.com/thing:1613957), is after significant effort to remove the yellow ABS supports from", "image below, from [Thingiverse - MOF-5 unit cell](https://www.thingiverse.com/thing:1613957), is after significant effort to", "remove (physically) when I print with ABS. The image below, from [Thingiverse -", "cell](https://www.thingiverse.com/thing:1613957), is after significant effort to remove the yellow ABS supports from a", "thing in water and let the supports dissolve. I've considered other options since", "below, from [Thingiverse - MOF-5 unit cell](https://www.thingiverse.com/thing:1613957), is after significant effort to remove", "ABS supports removed from black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned about polyvinylalcohol (PVA) as", "after significant effort to remove the yellow ABS supports from a black ABS", "and the supports with PVA, then throw the whole thing in water and", "then throw the whole thing in water and let the supports dissolve. I've", "is ~4x more expensive than ABS. Doing a PLA print with ABS supports,", "supports removed from black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned about polyvinylalcohol (PVA) as a", "- MOF-5 unit cell](https://www.thingiverse.com/thing:1613957), is after significant effort to remove the yellow ABS", "by dissolution of ABS with acetone, is my best idea currently. Has anyone", "removed from black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned about polyvinylalcohol (PVA) as a 3D-printing", "I've considered other options since PVA is ~4x more expensive than ABS. Doing", "supports dissolve. I've considered other options since PVA is ~4x more expensive than", "a 3D-printing filament which is soluble in water. It seems like a great", "a PLA print with ABS supports, followed by dissolution of ABS with acetone,", "yellow ABS supports from a black ABS model. [![Yellow ABS supports removed from", "[![Yellow ABS supports removed from black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned about polyvinylalcohol (PVA)", "the supports dissolve. I've considered other options since PVA is ~4x more expensive", "than ABS. Doing a PLA print with ABS supports, followed by dissolution of", "MOF-5 unit cell](https://www.thingiverse.com/thing:1613957), is after significant effort to remove the yellow ABS supports", "you can print the model with ABS or PLA and the supports with", "more expensive than ABS. Doing a PLA print with ABS supports, followed by", "where you can print the model with ABS or PLA and the supports", "ABS. The image below, from [Thingiverse - MOF-5 unit cell](https://www.thingiverse.com/thing:1613957), is after significant", "from [Thingiverse - MOF-5 unit cell](https://www.thingiverse.com/thing:1613957), is after significant effort to remove the", "option for dual-extruder printers, where you can print the model with ABS or", "throw the whole thing in water and let the supports dissolve. I've considered", "ABS supports, followed by dissolution of ABS with acetone, is my best idea", "the yellow ABS supports from a black ABS model. [![Yellow ABS supports removed", "like a great option for dual-extruder printers, where you can print the model", "print with ABS. The image below, from [Thingiverse - MOF-5 unit cell](https://www.thingiverse.com/thing:1613957), is", "model. [![Yellow ABS supports removed from black ABS model](https://i.stack.imgur.com/3Ze3e.png)](https://i.stack.imgur.com/3Ze3e.png) I've learned about polyvinylalcohol", "with ABS. The image below, from [Thingiverse - MOF-5 unit cell](https://www.thingiverse.com/thing:1613957), is after", "ABS or PLA and the supports with PVA, then throw the whole thing", "ABS. Doing a PLA print with ABS supports, followed by dissolution of ABS", "PLA print with ABS supports, followed by dissolution of ABS with acetone, is", "dissolution of ABS with acetone, is my best idea currently. Has anyone found", "polyvinylalcohol (PVA) as a 3D-printing filament which is soluble in water. It seems", "of ABS with acetone, is my best idea currently. Has anyone found success", "printers, where you can print the model with ABS or PLA and the" ]
[ "second. Note 1.5: I added 10 mm to my settings because I was", "to print multiple objects in a single G-code file on my Maker Select", "I was concerned that Cura wasn't accounting for the width of the raft", "min and max directions correct. For instance, I just swapped my Y min", "concerned that I got the min and max directions correct. For instance, I", "I just swapped my Y min and Y max values because when I", "question, this printer may be physically the same as the WanHao Duplicator i3.", "From what I've read online before posting this question, this printer may be", "Printer. On the Cura \"Machine>Machine Settings...\" menu, what are the correct settings for", "for the width of the raft that I usually use when I print.", "what are the correct settings for \"Printer head size\" in the upper right", "other way, the print head impacted the first object when printing the second.", "correct settings for \"Printer head size\" in the upper right quadrant? My best", "I've read online before posting this question, this printer may be physically the", "I added 10 mm to my settings because I was concerned that Cura", "head impacted the first object when printing the second. Note 1.5: I added", "below: [![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1: I'm particularly concerned that I got the", "instance, I just swapped my Y min and Y max values because when", "added 10 mm to my settings because I was concerned that Cura wasn't", "and Y max values because when I tried them the other way, the", "Cura wasn't accounting for the width of the raft that I usually use", "guess is below: [![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1: I'm particularly concerned that I", "multiple objects in a single G-code file on my Maker Select Plus 3D", "and max directions correct. For instance, I just swapped my Y min and", "usually use when I print. Note 2: From what I've read online before", "file on my Maker Select Plus 3D Printer. On the Cura \"Machine>Machine Settings...\"", "are the correct settings for \"Printer head size\" in the upper right quadrant?", "for \"Printer head size\" in the upper right quadrant? My best guess is", "Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1: I'm particularly concerned that I got the min and max", "impacted the first object when printing the second. Note 1.5: I added 10", "printing the second. Note 1.5: I added 10 mm to my settings because", "1: I'm particularly concerned that I got the min and max directions correct.", "this question, this printer may be physically the same as the WanHao Duplicator", "best guess is below: [![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1: I'm particularly concerned that", "the width of the raft that I usually use when I print. Note", "quadrant? My best guess is below: [![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1: I'm particularly", "Note 2: From what I've read online before posting this question, this printer", "I tried them the other way, the print head impacted the first object", "the min and max directions correct. For instance, I just swapped my Y", "that I got the min and max directions correct. For instance, I just", "1.5: I added 10 mm to my settings because I was concerned that", "read online before posting this question, this printer may be physically the same", "my settings because I was concerned that Cura wasn't accounting for the width", "of the raft that I usually use when I print. Note 2: From", "first object when printing the second. Note 1.5: I added 10 mm to", "directions correct. For instance, I just swapped my Y min and Y max", "\"Machine>Machine Settings...\" menu, what are the correct settings for \"Printer head size\" in", "to my settings because I was concerned that Cura wasn't accounting for the", "3D Printer. On the Cura \"Machine>Machine Settings...\" menu, what are the correct settings", "because I was concerned that Cura wasn't accounting for the width of the", "my Y min and Y max values because when I tried them the", "2: From what I've read online before posting this question, this printer may", "G-code file on my Maker Select Plus 3D Printer. On the Cura \"Machine>Machine", "in a single G-code file on my Maker Select Plus 3D Printer. On", "menu, what are the correct settings for \"Printer head size\" in the upper", "right quadrant? My best guess is below: [![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1: I'm", "I got the min and max directions correct. For instance, I just swapped", "settings for \"Printer head size\" in the upper right quadrant? My best guess", "way, the print head impacted the first object when printing the second. Note", "10 mm to my settings because I was concerned that Cura wasn't accounting", "on my Maker Select Plus 3D Printer. On the Cura \"Machine>Machine Settings...\" menu,", "mm to my settings because I was concerned that Cura wasn't accounting for", "width of the raft that I usually use when I print. Note 2:", "max values because when I tried them the other way, the print head", "my Maker Select Plus 3D Printer. On the Cura \"Machine>Machine Settings...\" menu, what", "accounting for the width of the raft that I usually use when I", "Select Plus 3D Printer. On the Cura \"Machine>Machine Settings...\" menu, what are the", "Cura \"Machine>Machine Settings...\" menu, what are the correct settings for \"Printer head size\"", "print. Note 2: From what I've read online before posting this question, this", "On the Cura \"Machine>Machine Settings...\" menu, what are the correct settings for \"Printer", "object when printing the second. Note 1.5: I added 10 mm to my", "that I usually use when I print. Note 2: From what I've read", "online before posting this question, this printer may be physically the same as", "use when I print. Note 2: From what I've read online before posting", "[![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1: I'm particularly concerned that I got the min", "when I tried them the other way, the print head impacted the first", "wasn't accounting for the width of the raft that I usually use when", "correct. For instance, I just swapped my Y min and Y max values", "because when I tried them the other way, the print head impacted the", "values because when I tried them the other way, the print head impacted", "the print head impacted the first object when printing the second. Note 1.5:", "I usually use when I print. Note 2: From what I've read online", "Y max values because when I tried them the other way, the print", "Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1: I'm particularly concerned that I got the min and", "print head impacted the first object when printing the second. Note 1.5: I", "want to print multiple objects in a single G-code file on my Maker", "that Cura wasn't accounting for the width of the raft that I usually", "tried them the other way, the print head impacted the first object when", "them the other way, the print head impacted the first object when printing", "Maker Select Plus 3D Printer. On the Cura \"Machine>Machine Settings...\" menu, what are", "when I print. Note 2: From what I've read online before posting this", "Note 1.5: I added 10 mm to my settings because I was concerned", "print multiple objects in a single G-code file on my Maker Select Plus", "swapped my Y min and Y max values because when I tried them", "the upper right quadrant? My best guess is below: [![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note", "\"Printer head size\" in the upper right quadrant? My best guess is below:", "just swapped my Y min and Y max values because when I tried", "the Cura \"Machine>Machine Settings...\" menu, what are the correct settings for \"Printer head", "the first object when printing the second. Note 1.5: I added 10 mm", "I print. Note 2: From what I've read online before posting this question,", "Y min and Y max values because when I tried them the other", "For instance, I just swapped my Y min and Y max values because", "the second. Note 1.5: I added 10 mm to my settings because I", "in the upper right quadrant? My best guess is below: [![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png)", "upper right quadrant? My best guess is below: [![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1:", "I want to print multiple objects in a single G-code file on my", "size\" in the upper right quadrant? My best guess is below: [![Machine Settings", "objects in a single G-code file on my Maker Select Plus 3D Printer.", "Plus 3D Printer. On the Cura \"Machine>Machine Settings...\" menu, what are the correct", "posting this question, this printer may be physically the same as the WanHao", "settings because I was concerned that Cura wasn't accounting for the width of", "the correct settings for \"Printer head size\" in the upper right quadrant? My", "My best guess is below: [![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1: I'm particularly concerned", "I'm particularly concerned that I got the min and max directions correct. For", "what I've read online before posting this question, this printer may be physically", "max directions correct. For instance, I just swapped my Y min and Y", "Note 1: I'm particularly concerned that I got the min and max directions", "raft that I usually use when I print. Note 2: From what I've", "single G-code file on my Maker Select Plus 3D Printer. On the Cura", "the other way, the print head impacted the first object when printing the", "before posting this question, this printer may be physically the same as the", "min and Y max values because when I tried them the other way,", "the raft that I usually use when I print. Note 2: From what", "particularly concerned that I got the min and max directions correct. For instance,", "when printing the second. Note 1.5: I added 10 mm to my settings", "was concerned that Cura wasn't accounting for the width of the raft that", "got the min and max directions correct. For instance, I just swapped my", "concerned that Cura wasn't accounting for the width of the raft that I", "is below: [![Machine Settings Dialog](https://i.stack.imgur.com/hJkip.png)](https://i.stack.imgur.com/hJkip.png) Note 1: I'm particularly concerned that I got", "a single G-code file on my Maker Select Plus 3D Printer. On the", "head size\" in the upper right quadrant? My best guess is below: [![Machine", "Settings...\" menu, what are the correct settings for \"Printer head size\" in the" ]
[ "however adds filament to cover the gaps. The bottom left bunny is sliced", "increase the solid top layer count helps to get a closed surface. But", "The bottom left bunny is sliced with Slic3r 1.2.9.99. The top right bunny", "at the forehead and the back of the bottom left bunny. I have", "the bottom left bunny. I have \"extra perimeters if needed\" turned on. But", "The printer settings in both Cura and Slic3r are: * 0.4 mm nozzel;", "a closed surface. But then everything gets stiffer. The bunnies are printed with", "trouble printing a hollow object using Slic3r. On flat slopes on top, there", "slopes on top, there are gaps that I cannot get fixed. The perimeters", "having trouble printing a hollow object using Slic3r. On flat slopes on top,", "the solid top layer count helps to get a closed surface. But then", "top right bunny is sliced with Cura 2.5. Take a closer look at", "they are a bit squishy. [![Cura and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer settings in", "then everything gets stiffer. The bunnies are printed with nylon so they are", "nozzel; * 0.2 mm layer height; * No infill; * 2 perimeter walls,", "are: * 0.4 mm nozzel; * 0.2 mm layer height; * No infill;", "bunny is sliced with Cura 2.5. Take a closer look at the forehead", "* No infill; * 2 perimeter walls, and; * 3 solid top/bottom layers.", "is sliced with Slic3r 1.2.9.99. The top right bunny is sliced with Cura", "is sliced with Cura 2.5. Take a closer look at the forehead and", "surface. But then everything gets stiffer. The bunnies are printed with nylon so", "successive layers just don't cover each other. Cura however adds filament to cover", "0.4 mm nozzel; * 0.2 mm layer height; * No infill; * 2", "left bunny is sliced with Slic3r 1.2.9.99. The top right bunny is sliced", "top, there are gaps that I cannot get fixed. The perimeters of successive", "printer settings in both Cura and Slic3r are: * 0.4 mm nozzel; ", "fixed. The perimeters of successive layers just don't cover each other. Cura however", "settings in both Cura and Slic3r are: 0.4 mm nozzel; * 0.2", "filament to cover the gaps. The bottom left bunny is sliced with Slic3r", "are printed with nylon so they are a bit squishy. [![Cura and Slic3r", "squishy. [![Cura and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer settings in both Cura and Slic3r", "are a bit squishy. [![Cura and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer settings in both", "The top right bunny is sliced with Cura 2.5. Take a closer look", "I have \"extra perimeters if needed\" turned on. But turning it off makes", "count helps to get a closed surface. But then everything gets stiffer. The", "everything gets stiffer. The bunnies are printed with nylon so they are a", "right bunny is sliced with Cura 2.5. Take a closer look at the", "I missing? So far only adding infill and increase the solid top layer", "bottom left bunny. I have \"extra perimeters if needed\" turned on. But turning", "adds filament to cover the gaps. The bottom left bunny is sliced with", "left bunny. I have \"extra perimeters if needed\" turned on. But turning it", "I cannot get fixed. The perimeters of successive layers just don't cover each", "I am having trouble printing a hollow object using Slic3r. On flat slopes", "helps to get a closed surface. But then everything gets stiffer. The bunnies", "a hollow object using Slic3r. On flat slopes on top, there are gaps", "On flat slopes on top, there are gaps that I cannot get fixed.", "cover each other. Cura however adds filament to cover the gaps. The bottom", "so they are a bit squishy. [![Cura and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer settings", "am having trouble printing a hollow object using Slic3r. On flat slopes on", "far only adding infill and increase the solid top layer count helps to", "2.5. Take a closer look at the forehead and the back of the", "get a closed surface. But then everything gets stiffer. The bunnies are printed", "turning it off makes no difference. What am I missing? So far only", "What am I missing? So far only adding infill and increase the solid", "of successive layers just don't cover each other. Cura however adds filament to", "nylon so they are a bit squishy. [![Cura and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer", "mm layer height; * No infill; * 2 perimeter walls, and; * 3", "of the bottom left bunny. I have \"extra perimeters if needed\" turned on.", "get fixed. The perimeters of successive layers just don't cover each other. Cura", "Slic3r 1.2.9.99. The top right bunny is sliced with Cura 2.5. Take a", "the forehead and the back of the bottom left bunny. I have \"extra", "bunny is sliced with Slic3r 1.2.9.99. The top right bunny is sliced with", "only adding infill and increase the solid top layer count helps to get", "bit squishy. [![Cura and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer settings in both Cura and", "using Slic3r. On flat slopes on top, there are gaps that I cannot", "missing? So far only adding infill and increase the solid top layer count", "\"extra perimeters if needed\" turned on. But turning it off makes no difference.", "* 0.2 mm layer height; * No infill; * 2 perimeter walls, and;", "Slic3r are: * 0.4 mm nozzel; * 0.2 mm layer height; * No", "Cura and Slic3r are: * 0.4 mm nozzel; * 0.2 mm layer height;", "that I cannot get fixed. The perimeters of successive layers just don't cover", "gaps. The bottom left bunny is sliced with Slic3r 1.2.9.99. The top right", "and the back of the bottom left bunny. I have \"extra perimeters if", "Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer settings in both Cura and Slic3r are: * 0.4", "in both Cura and Slic3r are: * 0.4 mm nozzel; * 0.2 mm", "look at the forehead and the back of the bottom left bunny. I", "forehead and the back of the bottom left bunny. I have \"extra perimeters", "layer count helps to get a closed surface. But then everything gets stiffer.", "stiffer. The bunnies are printed with nylon so they are a bit squishy.", "bunny. I have \"extra perimeters if needed\" turned on. But turning it off", "needed\" turned on. But turning it off makes no difference. What am I", "and Slic3r are: * 0.4 mm nozzel; * 0.2 mm layer height; ", "the gaps. The bottom left bunny is sliced with Slic3r 1.2.9.99. The top", "[![Cura and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer settings in both Cura and Slic3r are:", "sliced with Cura 2.5. Take a closer look at the forehead and the", "Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer settings in both Cura and Slic3r are: 0.4 mm", "Slic3r. On flat slopes on top, there are gaps that I cannot get", "closer look at the forehead and the back of the bottom left bunny.", "there are gaps that I cannot get fixed. The perimeters of successive layers", "other. Cura however adds filament to cover the gaps. The bottom left bunny", "The bunnies are printed with nylon so they are a bit squishy. [![Cura", "layer height; * No infill; * 2 perimeter walls, and; * 3 solid", "Cura 2.5. Take a closer look at the forehead and the back of", "mm nozzel; * 0.2 mm layer height; * No infill; * 2 perimeter", "solid top layer count helps to get a closed surface. But then everything", "gets stiffer. The bunnies are printed with nylon so they are a bit", "Cura however adds filament to cover the gaps. The bottom left bunny is", "and increase the solid top layer count helps to get a closed surface.", "infill and increase the solid top layer count helps to get a closed", "The perimeters of successive layers just don't cover each other. Cura however adds", "adding infill and increase the solid top layer count helps to get a", "turned on. But turning it off makes no difference. What am I missing?", "* 0.4 mm nozzel; * 0.2 mm layer height; * No infill; ", "both Cura and Slic3r are: 0.4 mm nozzel; * 0.2 mm layer", "no difference. What am I missing? So far only adding infill and increase", "Take a closer look at the forehead and the back of the bottom", "So far only adding infill and increase the solid top layer count helps", "a bit squishy. [![Cura and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer settings in both Cura", "a closer look at the forehead and the back of the bottom left", "perimeters of successive layers just don't cover each other. Cura however adds filament", "bunnies are printed with nylon so they are a bit squishy. [![Cura and", "off makes no difference. What am I missing? So far only adding infill", "cannot get fixed. The perimeters of successive layers just don't cover each other.", "don't cover each other. Cura however adds filament to cover the gaps. The", "am I missing? So far only adding infill and increase the solid top", "cover the gaps. The bottom left bunny is sliced with Slic3r 1.2.9.99. The", "But then everything gets stiffer. The bunnies are printed with nylon so they", "it off makes no difference. What am I missing? So far only adding", "with Slic3r 1.2.9.99. The top right bunny is sliced with Cura 2.5. Take", "to get a closed surface. But then everything gets stiffer. The bunnies are", "printing a hollow object using Slic3r. On flat slopes on top, there are", "object using Slic3r. On flat slopes on top, there are gaps that I", "closed surface. But then everything gets stiffer. The bunnies are printed with nylon", "hollow object using Slic3r. On flat slopes on top, there are gaps that", "perimeters if needed\" turned on. But turning it off makes no difference. What", "sliced with Slic3r 1.2.9.99. The top right bunny is sliced with Cura 2.5.", "have \"extra perimeters if needed\" turned on. But turning it off makes no", "the back of the bottom left bunny. I have \"extra perimeters if needed\"", "just don't cover each other. Cura however adds filament to cover the gaps.", "top layer count helps to get a closed surface. But then everything gets", "on. But turning it off makes no difference. What am I missing? So", "to cover the gaps. The bottom left bunny is sliced with Slic3r 1.2.9.99.", "printed with nylon so they are a bit squishy. [![Cura and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg)", "1.2.9.99. The top right bunny is sliced with Cura 2.5. Take a closer", "But turning it off makes no difference. What am I missing? So far", "on top, there are gaps that I cannot get fixed. The perimeters of", "with Cura 2.5. Take a closer look at the forehead and the back", "are gaps that I cannot get fixed. The perimeters of successive layers just", "height; * No infill; * 2 perimeter walls, and; * 3 solid top/bottom", "0.2 mm layer height; * No infill; * 2 perimeter walls, and; ", "each other. Cura however adds filament to cover the gaps. The bottom left", "makes no difference. What am I missing? So far only adding infill and", "if needed\" turned on. But turning it off makes no difference. What am", "with nylon so they are a bit squishy. [![Cura and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The", "and Slic3r Bunnies](https://i.stack.imgur.com/kTkjA.jpg)](https://i.stack.imgur.com/kTkjA.jpg) The printer settings in both Cura and Slic3r are: ", "layers just don't cover each other. Cura however adds filament to cover the", "flat slopes on top, there are gaps that I cannot get fixed. The", "bottom left bunny is sliced with Slic3r 1.2.9.99. The top right bunny is", "gaps that I cannot get fixed. The perimeters of successive layers just don't", "back of the bottom left bunny. I have \"extra perimeters if needed\" turned", "difference. What am I missing? So far only adding infill and increase the" ]
[ "2+ It starts to feed and then all of the sudden, the wire", "to feed and then all of the sudden, the wire 'eats' (read breaks,", "sudden, the wire 'eats' (read breaks, but not entirely) the plastic filament as", "can see on the picture below: [![Photo of damaged filament](https://i.stack.imgur.com/OnQy7.jpg)](https://i.stack.imgur.com/OnQy7.jpg) Any hints are", "plastic filament as you can see on the picture below: [![Photo of damaged", "PLA filament that is not feeding correctly into our Ultimaker 2+ It starts", "feed and then all of the sudden, the wire 'eats' (read breaks, but", "It starts to feed and then all of the sudden, the wire 'eats'", "on the picture below: [![Photo of damaged filament](https://i.stack.imgur.com/OnQy7.jpg)](https://i.stack.imgur.com/OnQy7.jpg) Any hints are more than", "the following PLA filament that is not feeding correctly into our Ultimaker 2+", "(read breaks, but not entirely) the plastic filament as you can see on", "but not entirely) the plastic filament as you can see on the picture", "filament as you can see on the picture below: [![Photo of damaged filament](https://i.stack.imgur.com/OnQy7.jpg)](https://i.stack.imgur.com/OnQy7.jpg)", "I've got the following PLA filament that is not feeding correctly into our", "all of the sudden, the wire 'eats' (read breaks, but not entirely) the", "correctly into our Ultimaker 2+ It starts to feed and then all of", "the picture below: [![Photo of damaged filament](https://i.stack.imgur.com/OnQy7.jpg)](https://i.stack.imgur.com/OnQy7.jpg) Any hints are more than welcomed.", "starts to feed and then all of the sudden, the wire 'eats' (read", "not entirely) the plastic filament as you can see on the picture below:", "and then all of the sudden, the wire 'eats' (read breaks, but not", "the plastic filament as you can see on the picture below: [![Photo of", "wire 'eats' (read breaks, but not entirely) the plastic filament as you can", "'eats' (read breaks, but not entirely) the plastic filament as you can see", "into our Ultimaker 2+ It starts to feed and then all of the", "that is not feeding correctly into our Ultimaker 2+ It starts to feed", "breaks, but not entirely) the plastic filament as you can see on the", "following PLA filament that is not feeding correctly into our Ultimaker 2+ It", "our Ultimaker 2+ It starts to feed and then all of the sudden,", "you can see on the picture below: [![Photo of damaged filament](https://i.stack.imgur.com/OnQy7.jpg)](https://i.stack.imgur.com/OnQy7.jpg) Any hints", "as you can see on the picture below: [![Photo of damaged filament](https://i.stack.imgur.com/OnQy7.jpg)](https://i.stack.imgur.com/OnQy7.jpg) Any", "feeding correctly into our Ultimaker 2+ It starts to feed and then all", "is not feeding correctly into our Ultimaker 2+ It starts to feed and", "then all of the sudden, the wire 'eats' (read breaks, but not entirely)", "of the sudden, the wire 'eats' (read breaks, but not entirely) the plastic", "filament that is not feeding correctly into our Ultimaker 2+ It starts to", "the sudden, the wire 'eats' (read breaks, but not entirely) the plastic filament", "see on the picture below: [![Photo of damaged filament](https://i.stack.imgur.com/OnQy7.jpg)](https://i.stack.imgur.com/OnQy7.jpg) Any hints are more", "Ultimaker 2+ It starts to feed and then all of the sudden, the", "entirely) the plastic filament as you can see on the picture below: [![Photo", "got the following PLA filament that is not feeding correctly into our Ultimaker", "the wire 'eats' (read breaks, but not entirely) the plastic filament as you", "not feeding correctly into our Ultimaker 2+ It starts to feed and then" ]
[ "this community. This also not directly related with 3D printing. I searched about", "told me CNC machining centers (Milling) mostly use servo motors and CNC laser", "servo motors than steppers. I think position controlling is more important in laser", "cutters,plasma cutters and CNC router.SO, this is not a duplicate of [this](https://3dprinting.stackexchange.com/questions/3842/reprap-variants-with-servo-motors-rather-than-stepper-motors) one.", "I think position controlling is more important in laser and plasma cutters than", "more area than 3D printing and CNC routing.And also, This question asked for", "This question has more area than 3D printing and CNC routing.And also, This", "cutters use stepper motors mostly. Position controlling is more accurate in servo motors", "laser cutters,plasma cutters and CNC router.SO, this is not a duplicate of [this](https://3dprinting.stackexchange.com/questions/3842/reprap-variants-with-servo-motors-rather-than-stepper-motors)", "think position controlling is more important in laser and plasma cutters than CNC", "printing. I searched about this and I couldn't find good answer. One of", "position controlling is more important in laser and plasma cutters than CNC machining", "centers (Milling) mostly use servo motors and CNC laser cutter and plasma cutters", "also, This question asked for more reason for why use steppers in laser", "motors and CNC laser cutter and plasma cutters use stepper motors mostly. Position", "This question asked for more reason for why use steppers in laser cutters,plasma", "use steppers without using servo motors? P.S. This question has more area than", "steppers. I think position controlling is more important in laser and plasma cutters", "steppers in laser cutters,plasma cutters and CNC router.SO, this is not a duplicate", "find good answer. One of my friends told me CNC machining centers (Milling)", "me CNC machining centers (Milling) mostly use servo motors and CNC laser cutter", "do laser and plasma cutters use steppers without using servo motors? P.S. This", "answer. One of my friends told me CNC machining centers (Milling) mostly use", "I couldn't find good answer. One of my friends told me CNC machining", "3D printing. I searched about this and I couldn't find good answer. One", "CNC machining centers, but laser and plasma cutters use stepper motors. Why do", "Why do laser and plasma cutters use steppers without using servo motors? P.S.", "use servo motors and CNC laser cutter and plasma cutters use stepper motors", "has more area than 3D printing and CNC routing.And also, This question asked", "without using servo motors? P.S. This question has more area than 3D printing", "motors? P.S. This question has more area than 3D printing and CNC routing.And", "(Milling) mostly use servo motors and CNC laser cutter and plasma cutters use", "controlling is more accurate in servo motors than steppers. I think position controlling", "machining centers (Milling) mostly use servo motors and CNC laser cutter and plasma", "and I couldn't find good answer. One of my friends told me CNC", "use stepper motors. Why do laser and plasma cutters use steppers without using", "for more reason for why use steppers in laser cutters,plasma cutters and CNC", "centers, but laser and plasma cutters use stepper motors. Why do laser and", "laser and plasma cutters use stepper motors. Why do laser and plasma cutters", "and CNC laser cutter and plasma cutters use stepper motors mostly. Position controlling", "machining centers, but laser and plasma cutters use stepper motors. Why do laser", "friends told me CNC machining centers (Milling) mostly use servo motors and CNC", "in laser cutters,plasma cutters and CNC router.SO, this is not a duplicate of", "and plasma cutters use steppers without using servo motors? P.S. This question has", "for this community. This also not directly related with 3D printing. I searched", "plasma cutters use steppers without using servo motors? P.S. This question has more", "laser and plasma cutters than CNC machining centers, but laser and plasma cutters", "reason for why use steppers in laser cutters,plasma cutters and CNC router.SO, this", "use stepper motors mostly. Position controlling is more accurate in servo motors than", "plasma cutters use stepper motors. Why do laser and plasma cutters use steppers", "my friends told me CNC machining centers (Milling) mostly use servo motors and", "than 3D printing and CNC routing.And also, This question asked for more reason", "I searched about this and I couldn't find good answer. One of my", "3D printing and CNC routing.And also, This question asked for more reason for", "laser and plasma cutters use steppers without using servo motors? P.S. This question", "motors than steppers. I think position controlling is more important in laser and", "related with 3D printing. I searched about this and I couldn't find good", "new one for this community. This also not directly related with 3D printing.", "is more accurate in servo motors than steppers. I think position controlling is", "accurate in servo motors than steppers. I think position controlling is more important", "directly related with 3D printing. I searched about this and I couldn't find", "more important in laser and plasma cutters than CNC machining centers, but laser", "mostly use servo motors and CNC laser cutter and plasma cutters use stepper", "and plasma cutters than CNC machining centers, but laser and plasma cutters use", "also not directly related with 3D printing. I searched about this and I", "routing.And also, This question asked for more reason for why use steppers in", "servo motors and CNC laser cutter and plasma cutters use stepper motors mostly.", "P.S. This question has more area than 3D printing and CNC routing.And also,", "motors. Why do laser and plasma cutters use steppers without using servo motors?", "question has more area than 3D printing and CNC routing.And also, This question", "plasma cutters than CNC machining centers, but laser and plasma cutters use stepper", "with 3D printing. I searched about this and I couldn't find good answer.", "searched about this and I couldn't find good answer. One of my friends", "mostly. Position controlling is more accurate in servo motors than steppers. I think", "about this and I couldn't find good answer. One of my friends told", "more accurate in servo motors than steppers. I think position controlling is more", "not directly related with 3D printing. I searched about this and I couldn't", "cutter and plasma cutters use stepper motors mostly. Position controlling is more accurate", "area than 3D printing and CNC routing.And also, This question asked for more", "printing and CNC routing.And also, This question asked for more reason for why", "One of my friends told me CNC machining centers (Milling) mostly use servo", "and CNC routing.And also, This question asked for more reason for why use", "in laser and plasma cutters than CNC machining centers, but laser and plasma", "for why use steppers in laser cutters,plasma cutters and CNC router.SO, this is", "good answer. One of my friends told me CNC machining centers (Milling) mostly", "using servo motors? P.S. This question has more area than 3D printing and", "use steppers in laser cutters,plasma cutters and CNC router.SO, this is not a", "motors mostly. Position controlling is more accurate in servo motors than steppers. I", "community. This also not directly related with 3D printing. I searched about this", "of my friends told me CNC machining centers (Milling) mostly use servo motors", "question asked for more reason for why use steppers in laser cutters,plasma cutters", "is more important in laser and plasma cutters than CNC machining centers, but", "cutters use stepper motors. Why do laser and plasma cutters use steppers without", "CNC machining centers (Milling) mostly use servo motors and CNC laser cutter and", "servo motors? P.S. This question has more area than 3D printing and CNC", "asked for more reason for why use steppers in laser cutters,plasma cutters and", "and plasma cutters use stepper motors mostly. Position controlling is more accurate in", "stepper motors. Why do laser and plasma cutters use steppers without using servo", "stepper motors mostly. Position controlling is more accurate in servo motors than steppers.", "important in laser and plasma cutters than CNC machining centers, but laser and", "in servo motors than steppers. I think position controlling is more important in", "and plasma cutters use stepper motors. Why do laser and plasma cutters use", "laser cutter and plasma cutters use stepper motors mostly. Position controlling is more", "Position controlling is more accurate in servo motors than steppers. I think position", "cutters use steppers without using servo motors? P.S. This question has more area", "than steppers. I think position controlling is more important in laser and plasma", "steppers without using servo motors? P.S. This question has more area than 3D", "couldn't find good answer. One of my friends told me CNC machining centers", "why use steppers in laser cutters,plasma cutters and CNC router.SO, this is not", "one for this community. This also not directly related with 3D printing. I", "plasma cutters use stepper motors mostly. Position controlling is more accurate in servo", "a new one for this community. This also not directly related with 3D", "but laser and plasma cutters use stepper motors. Why do laser and plasma", "this and I couldn't find good answer. One of my friends told me", "I'm a new one for this community. This also not directly related with", "than CNC machining centers, but laser and plasma cutters use stepper motors. Why", "This also not directly related with 3D printing. I searched about this and", "CNC laser cutter and plasma cutters use stepper motors mostly. Position controlling is", "more reason for why use steppers in laser cutters,plasma cutters and CNC router.SO,", "CNC routing.And also, This question asked for more reason for why use steppers", "cutters than CNC machining centers, but laser and plasma cutters use stepper motors.", "controlling is more important in laser and plasma cutters than CNC machining centers," ]
[ "the LCD menu (without a computer connected), it only goes down, when I", "I try to move the Z-axis, using the hardware buttons in the LCD", "goes down, when I both increase, and decrease, the value of Z. Any", "the Z-axis, using the hardware buttons in the LCD menu (without a computer", "computer connected), it only goes down, when I both increase, and decrease, the", "connected), it only goes down, when I both increase, and decrease, the value", "just finished building a Tronxy P802M Prusa i3. When I try to move", "finished building a Tronxy P802M Prusa i3. When I try to move the", "When I try to move the Z-axis, using the hardware buttons in the", "LCD menu (without a computer connected), it only goes down, when I both", "try to move the Z-axis, using the hardware buttons in the LCD menu", "Tronxy P802M Prusa i3. When I try to move the Z-axis, using the", "a computer connected), it only goes down, when I both increase, and decrease,", "building a Tronxy P802M Prusa i3. When I try to move the Z-axis,", "to move the Z-axis, using the hardware buttons in the LCD menu (without", "buttons in the LCD menu (without a computer connected), it only goes down,", "P802M Prusa i3. When I try to move the Z-axis, using the hardware", "move the Z-axis, using the hardware buttons in the LCD menu (without a", "hardware buttons in the LCD menu (without a computer connected), it only goes", "menu (without a computer connected), it only goes down, when I both increase,", "down, when I both increase, and decrease, the value of Z. Any suggestions?", "i3. When I try to move the Z-axis, using the hardware buttons in", "it only goes down, when I both increase, and decrease, the value of", "the hardware buttons in the LCD menu (without a computer connected), it only", "have just finished building a Tronxy P802M Prusa i3. When I try to", "a Tronxy P802M Prusa i3. When I try to move the Z-axis, using", "using the hardware buttons in the LCD menu (without a computer connected), it", "only goes down, when I both increase, and decrease, the value of Z.", "Z-axis, using the hardware buttons in the LCD menu (without a computer connected),", "Prusa i3. When I try to move the Z-axis, using the hardware buttons", "(without a computer connected), it only goes down, when I both increase, and", "in the LCD menu (without a computer connected), it only goes down, when", "I have just finished building a Tronxy P802M Prusa i3. When I try" ]
[ "that Cura uses or how to fix them for my machine. Look at", "full print area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I think my case is a lot", "this better: [![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a bit of dup of [Cura not", "the margins that Cura uses or how to fix them for my machine.", "not allowing full print area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I think my case is", "Cura, depicting large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't seem to tweak the stuff under", "Look at this: [![Screenshot of Cura, depicting large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't seem", "to understand the margins that Cura uses or how to fix them for", "to tweak the stuff under machine settings to anything that does this better:", "Cura uses or how to fix them for my machine. Look at this:", "machine. Look at this: [![Screenshot of Cura, depicting large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't", "margins that Cura uses or how to fix them for my machine. Look", "a bit of dup of [Cura not allowing full print area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used),", "[Cura not allowing full print area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I think my case", "print area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I think my case is a lot worse", "better: [![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a bit of dup of [Cura not allowing", "understand the margins that Cura uses or how to fix them for my", "to anything that does this better: [![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a bit of", "area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I think my case is a lot worse and", "[![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a bit of dup of [Cura not allowing full", "for my machine. Look at this: [![Screenshot of Cura, depicting large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png)", "I think my case is a lot worse and can't be explained by", "allowing full print area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I think my case is a", "uses or how to fix them for my machine. Look at this: [![Screenshot", "tweak the stuff under machine settings to anything that does this better: [![Screenshot", "this: [![Screenshot of Cura, depicting large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't seem to tweak", "to fix them for my machine. Look at this: [![Screenshot of Cura, depicting", "settings to anything that does this better: [![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a bit", "bit of dup of [Cura not allowing full print area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but", "fix them for my machine. Look at this: [![Screenshot of Cura, depicting large", "anything that does this better: [![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a bit of dup", "of dup of [Cura not allowing full print area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I", "think my case is a lot worse and can't be explained by skirts.", "can't seem to tweak the stuff under machine settings to anything that does", "Maybe a bit of dup of [Cura not allowing full print area to", "seem to understand the margins that Cura uses or how to fix them", "of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a bit of dup of [Cura not allowing full print", "to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I think my case is a lot worse and can't", "settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a bit of dup of [Cura not allowing full print area", "large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't seem to tweak the stuff under machine settings", "the stuff under machine settings to anything that does this better: [![Screenshot of", "my machine. Look at this: [![Screenshot of Cura, depicting large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I", "at this: [![Screenshot of Cura, depicting large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't seem to", "that does this better: [![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a bit of dup of", "used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I think my case is a lot worse and can't be", "seem to tweak the stuff under machine settings to anything that does this", "does this better: [![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a bit of dup of [Cura", "area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't seem to tweak the stuff under machine settings to anything", "machine settings to anything that does this better: [![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe a", "or how to fix them for my machine. Look at this: [![Screenshot of", "I can't seem to understand the margins that Cura uses or how to", "dup of [Cura not allowing full print area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I think", "how to fix them for my machine. Look at this: [![Screenshot of Cura,", "of Cura, depicting large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't seem to tweak the stuff", "depicting large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't seem to tweak the stuff under machine", "them for my machine. Look at this: [![Screenshot of Cura, depicting large grey", "under machine settings to anything that does this better: [![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png) Maybe", "but I think my case is a lot worse and can't be explained", "[![Screenshot of Cura, depicting large grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't seem to tweak the", "I can't seem to tweak the stuff under machine settings to anything that", "can't seem to understand the margins that Cura uses or how to fix", "stuff under machine settings to anything that does this better: [![Screenshot of settings](https://i.stack.imgur.com/FEd5k.png)](https://i.stack.imgur.com/FEd5k.png)", "grey area](https://i.stack.imgur.com/5oD0d.png)](https://i.stack.imgur.com/5oD0d.png) I can't seem to tweak the stuff under machine settings to", "of [Cura not allowing full print area to used](https://3dprinting.stackexchange.com/questions/645/cura-not-allowing-full-print-area-to-used), but I think my" ]
[ "an X, Y, Z position from the printer to the computer in real", "been doing tests with ReplicatorG but I'm not married to that software. Please", "dual extruders and I'm trying to get an X, Y, Z position from", "I'm trying to get an X, Y, Z position from the printer to", "the printer to the computer in real time. Is that even possible? The", "I have a wooden first generation Replicator with dual extruders and I'm trying", "computer in real time. Is that even possible? The firmware used by the", "doing tests with ReplicatorG but I'm not married to that software. Please let", "possible? The firmware used by the replicator is version 5.5 I believe, and", "Replicator with dual extruders and I'm trying to get an X, Y, Z", "X, Y, Z position from the printer to the computer in real time.", "printer to the computer in real time. Is that even possible? The firmware", "time. Is that even possible? The firmware used by the replicator is version", "Y, Z position from the printer to the computer in real time. Is", "ReplicatorG but I'm not married to that software. Please let me know if", "tests with ReplicatorG but I'm not married to that software. Please let me", "not married to that software. Please let me know if you need any", "first generation Replicator with dual extruders and I'm trying to get an X,", "position from the printer to the computer in real time. Is that even", "I believe, and I've been doing tests with ReplicatorG but I'm not married", "Is that even possible? The firmware used by the replicator is version 5.5", "and I'm trying to get an X, Y, Z position from the printer", "that even possible? The firmware used by the replicator is version 5.5 I", "to that software. Please let me know if you need any extra info", "even possible? The firmware used by the replicator is version 5.5 I believe,", "Please let me know if you need any extra info before being able", "by the replicator is version 5.5 I believe, and I've been doing tests", "a wooden first generation Replicator with dual extruders and I'm trying to get", "let me know if you need any extra info before being able to", "Z position from the printer to the computer in real time. Is that", "wooden first generation Replicator with dual extruders and I'm trying to get an", "The firmware used by the replicator is version 5.5 I believe, and I've", "and I've been doing tests with ReplicatorG but I'm not married to that", "with ReplicatorG but I'm not married to that software. Please let me know", "5.5 I believe, and I've been doing tests with ReplicatorG but I'm not", "married to that software. Please let me know if you need any extra", "with dual extruders and I'm trying to get an X, Y, Z position", "but I'm not married to that software. Please let me know if you", "get an X, Y, Z position from the printer to the computer in", "from the printer to the computer in real time. Is that even possible?", "I'm not married to that software. Please let me know if you need", "know if you need any extra info before being able to comment on", "me know if you need any extra info before being able to comment", "to get an X, Y, Z position from the printer to the computer", "is version 5.5 I believe, and I've been doing tests with ReplicatorG but", "firmware used by the replicator is version 5.5 I believe, and I've been", "real time. Is that even possible? The firmware used by the replicator is", "in real time. Is that even possible? The firmware used by the replicator", "have a wooden first generation Replicator with dual extruders and I'm trying to", "software. Please let me know if you need any extra info before being", "trying to get an X, Y, Z position from the printer to the", "used by the replicator is version 5.5 I believe, and I've been doing", "extruders and I'm trying to get an X, Y, Z position from the", "I've been doing tests with ReplicatorG but I'm not married to that software.", "that software. Please let me know if you need any extra info before", "the computer in real time. Is that even possible? The firmware used by", "the replicator is version 5.5 I believe, and I've been doing tests with", "replicator is version 5.5 I believe, and I've been doing tests with ReplicatorG", "generation Replicator with dual extruders and I'm trying to get an X, Y,", "believe, and I've been doing tests with ReplicatorG but I'm not married to", "to the computer in real time. Is that even possible? The firmware used", "version 5.5 I believe, and I've been doing tests with ReplicatorG but I'm", "if you need any extra info before being able to comment on this..." ]
[ "I'm sure confused on why it's not extruding properly at certain times. If", "it's not extruding properly at certain times. If anyone has any idea on", "either being too high or too fast as this section it was printing", "the print were not full layers and looked very stringy. Here's a couple", "stringy. Here's a couple pictures of what it looked like. [![enter image description", "layers of the print were not full layers and looked very stringy. Here's", "times. If anyone has any idea on what is happening and how to", "slow speed (around 55mm/s), and I'm sure confused on why it's not extruding", "lot of retraction. My retraction settings are 40mm/s for 4.5mm. I was printing", "not full layers and looked very stringy. Here's a couple pictures of what", "at a pretty slow speed (around 55mm/s), and I'm sure confused on why", "description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have a feeling that it may be because of my", "it was printing had to use a lot of retraction. My retraction settings", "retraction. My retraction settings are 40mm/s for 4.5mm. I was printing at a", "print I had to cancel as the layers of the print were not", "print were not full layers and looked very stringy. Here's a couple pictures", "use a lot of retraction. My retraction settings are 40mm/s for 4.5mm. I", "high or too fast as this section it was printing had to use", "on what is happening and how to fix it it will be gladly", "what it looked like. [![enter image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I", "I had to cancel as the layers of the print were not full", "a lot of retraction. My retraction settings are 40mm/s for 4.5mm. I was", "linear printer with a Bowden extruder, I use white 1.75 mm PLA at", "any idea on what is happening and how to fix it it will", "here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have a feeling that it may be", "idea on what is happening and how to fix it it will be", "the layers of the print were not full layers and looked very stringy.", "printing had to use a lot of retraction. My retraction settings are 40mm/s", "what is happening and how to fix it it will be gladly appreciated!", "couple pictures of what it looked like. [![enter image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image", "to cancel as the layers of the print were not full layers and", "30% into a large print I had to cancel as the layers of", "certain times. If anyone has any idea on what is happening and how", "it may be because of my retraction settings either being too high or", "retraction settings are 40mm/s for 4.5mm. I was printing at a pretty slow", "appreciated! I have an Anycubic Delta linear printer with a Bowden extruder, I", "a large print I had to cancel as the layers of the print", "sure confused on why it's not extruding properly at certain times. If anyone", "are 40mm/s for 4.5mm. I was printing at a pretty slow speed (around", "be gladly appreciated! I have an Anycubic Delta linear printer with a Bowden", "description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have a feeling that it may", "(around 55mm/s), and I'm sure confused on why it's not extruding properly at", "[![enter image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have a feeling that it may be because", "into a large print I had to cancel as the layers of the", "Here's a couple pictures of what it looked like. [![enter image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg)", "layers and looked very stringy. Here's a couple pictures of what it looked", "retraction settings either being too high or too fast as this section it", "were not full layers and looked very stringy. Here's a couple pictures of", "40mm/s for 4.5mm. I was printing at a pretty slow speed (around 55mm/s),", "here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have a feeling that it may be because of my retraction", "was printing had to use a lot of retraction. My retraction settings are", "pretty slow speed (around 55mm/s), and I'm sure confused on why it's not", "I was printing at a pretty slow speed (around 55mm/s), and I'm sure", "section it was printing had to use a lot of retraction. My retraction", "[![enter image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have a feeling that", "for 4.5mm. I was printing at a pretty slow speed (around 55mm/s), and", "looked like. [![enter image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have a", "settings are 40mm/s for 4.5mm. I was printing at a pretty slow speed", "a feeling that it may be because of my retraction settings either being", "a pretty slow speed (around 55mm/s), and I'm sure confused on why it's", "a Bowden extruder, I use white 1.75 mm PLA at 200C, .4mm nozzle", "confused on why it's not extruding properly at certain times. If anyone has", "like. [![enter image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have a feeling", "of my retraction settings either being too high or too fast as this", "or too fast as this section it was printing had to use a", "If anyone has any idea on what is happening and how to fix", "with a Bowden extruder, I use white 1.75 mm PLA at 200C, .4mm", "of the print were not full layers and looked very stringy. Here's a", "and looked very stringy. Here's a couple pictures of what it looked like.", "4.5mm. I was printing at a pretty slow speed (around 55mm/s), and I'm", "speed (around 55mm/s), and I'm sure confused on why it's not extruding properly", "on why it's not extruding properly at certain times. If anyone has any", "printer with a Bowden extruder, I use white 1.75 mm PLA at 200C,", "had to cancel as the layers of the print were not full layers", "as the layers of the print were not full layers and looked very", "to use a lot of retraction. My retraction settings are 40mm/s for 4.5mm.", "an Anycubic Delta linear printer with a Bowden extruder, I use white 1.75", "Anycubic Delta linear printer with a Bowden extruder, I use white 1.75 mm", "very stringy. Here's a couple pictures of what it looked like. [![enter image", "55mm/s), and I'm sure confused on why it's not extruding properly at certain", "as this section it was printing had to use a lot of retraction.", "fix it it will be gladly appreciated! I have an Anycubic Delta linear", "have a feeling that it may be because of my retraction settings either", "it it will be gladly appreciated! I have an Anycubic Delta linear printer", "has any idea on what is happening and how to fix it it", "too fast as this section it was printing had to use a lot", "of what it looked like. [![enter image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg)", "My retraction settings are 40mm/s for 4.5mm. I was printing at a pretty", "may be because of my retraction settings either being too high or too", "be because of my retraction settings either being too high or too fast", "and how to fix it it will be gladly appreciated! I have an", "extruding properly at certain times. If anyone has any idea on what is", "image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have a feeling that it", "fast as this section it was printing had to use a lot of", "printing at a pretty slow speed (around 55mm/s), and I'm sure confused on", "a couple pictures of what it looked like. [![enter image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter", "this section it was printing had to use a lot of retraction. My", "why it's not extruding properly at certain times. If anyone has any idea", "not extruding properly at certain times. If anyone has any idea on what", "happening and how to fix it it will be gladly appreciated! I have", "I have an Anycubic Delta linear printer with a Bowden extruder, I use", "full layers and looked very stringy. Here's a couple pictures of what it", "have an Anycubic Delta linear printer with a Bowden extruder, I use white", "pictures of what it looked like. [![enter image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image description", "feeling that it may be because of my retraction settings either being too", "settings either being too high or too fast as this section it was", "cancel as the layers of the print were not full layers and looked", "gladly appreciated! I have an Anycubic Delta linear printer with a Bowden extruder,", "looked very stringy. Here's a couple pictures of what it looked like. [![enter", "I have a feeling that it may be because of my retraction settings", "image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have a feeling that it may be because of", "Delta linear printer with a Bowden extruder, I use white 1.75 mm PLA", "is happening and how to fix it it will be gladly appreciated! I", "of retraction. My retraction settings are 40mm/s for 4.5mm. I was printing at", "being too high or too fast as this section it was printing had", "was printing at a pretty slow speed (around 55mm/s), and I'm sure confused", "how to fix it it will be gladly appreciated! I have an Anycubic", "to fix it it will be gladly appreciated! I have an Anycubic Delta", "had to use a lot of retraction. My retraction settings are 40mm/s for", "and I'm sure confused on why it's not extruding properly at certain times.", "Around 30% into a large print I had to cancel as the layers", "my retraction settings either being too high or too fast as this section", "that it may be because of my retraction settings either being too high", "it looked like. [![enter image description here](https://i.stack.imgur.com/krwhC.jpg)](https://i.stack.imgur.com/krwhC.jpg) [![enter image description here](https://i.stack.imgur.com/L0Nl7.jpg)](https://i.stack.imgur.com/L0Nl7.jpg) I have", "because of my retraction settings either being too high or too fast as", "will be gladly appreciated! I have an Anycubic Delta linear printer with a", "anyone has any idea on what is happening and how to fix it", "it will be gladly appreciated! I have an Anycubic Delta linear printer with", "large print I had to cancel as the layers of the print were", "at certain times. If anyone has any idea on what is happening and", "too high or too fast as this section it was printing had to", "properly at certain times. If anyone has any idea on what is happening" ]
[ "diameter greater than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here is a photo [![Four pieces of 2020", "in my answer below) - not through lack of research, but because there", "Sintron uses the PCB mounted mechanical switches (with four holes), and not the", "not being relevant with respect to the endstops). *Note that I am only", "Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because I purchased only the 3D printed parts from Sintron,", "which the Sintron manual is copied, but that also has no list (as", "no list (as well as not being relevant with respect to the endstops).", "nuts and washers) for the Sintron Kossel. --- Has anyone bought this kit,", "but not had an answer; Obtained the [Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there", "Has anyone bought this kit, and knows the answer, or knows where this", "documented? A complete list would be great, but in particular, I need the", "(it is unbelievably difficult to find the standard 2020 extrusion in Bangkok). Combine", "particular, I need the dimensions (M2.5/3/4/5? and length) and quantity of the bolts", "extrusion that I am using, does not take T-Nuts, only M5 hexagonal nuts", "uses 2020 aluminium1, not 1515 OpenBeam: [![Endstops and PCB mounted mechanical switches for", "have: * Searched the web, but to no avail; * Read the [product", "bolts (and nuts) which: * fasten the PCB mounted mechanical switches to the", "length) and quantity of the bolts (and nuts) which: * fasten the PCB", "I need a complete list of fasteners (bolts, nuts and washers) for the", "answer below) - not through lack of research, but because there is no", "manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there is no list contained therein, nor contains details about the", "Sintron manual is copied, but that also has no list (as well as", "provided\"; * Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not had an answer; * Obtained the [Sintron", "purchased only the 3D printed parts from Sintron, and I am sourcing the", "Searched the web, but to no avail; * Read the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which", "only M3 nuts and not M5 (I only discovered this after purchasing the", "I have: * Searched the web, but to no avail; * Read the", "email from Sintron, in my answer below) - not through lack of research,", "complete list of fasteners (bolts, nuts and washers) for the Sintron Kossel. ---", "endstops). *Note that I am only interested in the fasteners specifically for the", "Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because I purchased only the 3D printed parts from Sintron, and", "spacers/holders to the extruded 2020 aluminium. I have: * Searched the web, but", "dimensions (M2.5/3/4/5? and length) and quantity of the bolts (and nuts) which: ", "simple barebones mechanical switches (with two holes), and uses 2020 aluminium1, not 1515", "uses only M3 nuts and not* M5 (I only discovered this after purchasing", "outer diameter greater than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here is a photo [![Four pieces of", "stop spacers/holders to the extruded 2020 aluminium. I have: * Searched the web,", "mounted mechanical switches for the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because I purchased only the", "profile of the non-standard/non-\"European\" 2020 extrusion that I am using, does not take", "answer; * Obtained the [Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there is no list contained", "is copied, but that also has no list (as well as not being", "to the extruded 2020 aluminium. I have: * Searched the web, but to", "PCB mounted mechanical switches for the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because I purchased only", "Sintron kit uses only M3 nuts and not M5 (I only discovered this", "either locally or from Chinese suppliers on eBay. --- 1 In my particular", "Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not had an answer; * Obtained the [Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0)", "of the parts cheaply, either locally or from Chinese suppliers on eBay. ---", "my particular case, there is an additional complication. The profile of the non-standard/non-\"European\"", "the email from Sintron, in my answer below) - not through lack of", "that also has no list (as well as not being relevant with respect", "2020 aluminium1, not 1515 OpenBeam: [![Endstops and PCB mounted mechanical switches for the", "\"screws and nuts provided\"; * Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not had an answer; ", "the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because I purchased only the 3D printed parts from", "The Sintron uses the PCB mounted mechanical switches (with four holes), and not", "M5 (I only discovered this after* purchasing the printed parts kit (see the", "and length) and quantity of the bolts (and nuts) which: * fasten the", "the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which the Sintron manual is copied, but that also", "mounted mechanical switches and the PLA rectangular end stop spacers/holders to the extruded", "only the 3D printed parts from Sintron, and I am sourcing the rest", "this is documented? A complete list would be great, but in particular, I", "respect to the endstops). *Note that I am only interested in the fasteners", "interested in the fasteners specifically for the Sintron Kossel* and not the Kossel", "not had an answer; * Obtained the [Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there is", "build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there is no list contained therein, nor contains details about", "nuts) which: * fasten the PCB mounted mechanical switches to the PLA rectangular", "but there is no list contained therein, nor contains details about the fasteners", "and; * fasten the PCB mounted mechanical switches and the PLA rectangular end", "Sintron, in my answer below) - not through lack of research, but because", "or from Chinese suppliers on eBay. --- 1 In my particular case, there", "* Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not had an answer; * Obtained the [Sintron build", "case, there is an additional complication. The profile of the non-standard/non-\"European\" 2020 extrusion", "need a complete list of fasteners (bolts, nuts and washers) for the Sintron", "my answer below) - not through lack of research, but because there is", "aluminium. I have: Searched the web, but to no avail; * Read", "[Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not had an answer; * Obtained the [Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but", "* Read the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states only \"screws and nuts provided\"; ", " Searched the web, but to no avail; * Read the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062),", "fact that the Sintron kit uses only M3 nuts and not M5 (I", "web, but to no avail; * Read the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states only", "barebones mechanical switches (with two holes), and uses 2020 aluminium1, not 1515 OpenBeam:", "[![Endstops and PCB mounted mechanical switches for the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because I", "not through lack of research, but because there is no available list of", "not the simple barebones mechanical switches (with two holes), and uses 2020 aluminium1,", "take T-Nuts, only M5 hexagonal nuts (it is unbelievably difficult to find the", "M3 nuts, with outer diameter greater than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here is a photo", "only \"screws and nuts provided\"; * Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not had an answer;", "not the Kossel in general.** The Sintron uses the PCB mounted mechanical switches", "complete list would be great, but in particular, I need the dimensions (M2.5/3/4/5?", "from Sintron, in my answer below) - not through lack of research, but", "to the PLA rectangular end stop spacers/holders, and; * fasten the PCB mounted", "is an additional complication. The profile of the non-standard/non-\"European\" 2020 extrusion that I", "[Fat hexagonal M3 nuts, with outer diameter greater than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here is", "with respect to the endstops). *Note that I am only interested in the", "through lack of research, but because there is* no available list of fasteners),", "the dimensions (M2.5/3/4/5? and length) and quantity of the bolts (and nuts) which:", "contained therein, nor contains details about the fasteners relating to the endstops, and;", "the fasteners specifically for the Sintron Kossel and not the Kossel in general.*", "this after* purchasing the printed parts kit (see the email from Sintron, in", "* Obtained the [Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there is no list contained therein,", "suppliers on eBay. --- 1 In my particular case, there is an additional", "sourcing the rest of the parts cheaply, either locally or from Chinese suppliers", "on eBay. --- 1 In my particular case, there is an additional complication.", "only interested in the fasteners specifically for the Sintron Kossel and not the", "and the PLA rectangular end stop spacers/holders to the extruded 2020 aluminium. I", "list of fasteners), then I have the problem of finding a nut to", "in particular, I need the dimensions (M2.5/3/4/5? and length) and quantity of the", "of fasteners (bolts, nuts and washers) for the Sintron Kossel. --- Has anyone", "rectangular end stop spacers/holders to the extruded 2020 aluminium. I have: * Searched", "*Note that I am only interested in the fasteners specifically for the Sintron", "Obtained the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which the Sintron manual is copied, but that", "the rest of the parts cheaply, either locally or from Chinese suppliers on", "does not take T-Nuts, only M5 hexagonal nuts (it is unbelievably difficult to", "eBay. --- 1 In my particular case, there is an additional complication. The", "below) - not through lack of research, but because there is no available", "of fasteners), then I have the problem of finding a nut to use", "1515 OpenBeam: [![Endstops and PCB mounted mechanical switches for the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why?", "mounted mechanical switches (with four holes), and not the simple barebones mechanical switches", "rectangular end stop spacers/holders, and; * fasten the PCB mounted mechanical switches and", "stop spacers/holders, and; * fasten the PCB mounted mechanical switches and the PLA", "switches to the PLA rectangular end stop spacers/holders, and; * fasten the PCB", "the Sintron kit uses only M3 nuts and not M5 (I only discovered", "find the standard 2020 extrusion in Bangkok). Combine that with the fact that", "the PLA rectangular end stop spacers/holders, and; * fasten the PCB mounted mechanical", "the PLA rectangular end stop spacers/holders to the extruded 2020 aluminium. I have:", "purchasing the printed parts kit (see the email from Sintron, in my answer", "I have the problem of finding a nut to use (see [Fat hexagonal", "aluminium1, not 1515 OpenBeam: [![Endstops and PCB mounted mechanical switches for the Sintron", "there is an additional complication. The profile of the non-standard/non-\"European\" 2020 extrusion that", "am only interested in the fasteners specifically for the Sintron Kossel and not", "nuts, with outer diameter greater than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here is a photo [![Four", "this kit, and knows the answer, or knows where this is documented? A", "(as well as not being relevant with respect to the endstops). *Note that", "manual is copied, but that also has no list (as well as not", "then I have the problem of finding a nut to use (see [Fat", "Read the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states only \"screws and nuts provided\"; Contacted", "in general.** The Sintron uses the PCB mounted mechanical switches (with four holes),", "switches and the PLA rectangular end stop spacers/holders to the extruded 2020 aluminium.", "Obtained the [Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there is no list contained therein, nor", "and nuts provided\"; * Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not had an answer; * Obtained", "quantity of the bolts (and nuts) which: * fasten the PCB mounted mechanical", "spacers/holders, and; * fasten the PCB mounted mechanical switches and the PLA rectangular", "the PCB mounted mechanical switches (with four holes), and not the simple barebones", "Sintron Kossel* and not the Kossel in general.** The Sintron uses the PCB", "--- 1 In my particular case, there is an additional complication. The profile", "and not the simple barebones mechanical switches (with two holes), and uses 2020", "TL;DR I need a complete list of fasteners (bolts, nuts and washers) for", "would be great, but in particular, I need the dimensions (M2.5/3/4/5? and length)", "the PCB mounted mechanical switches to the PLA rectangular end stop spacers/holders, and;", "kit uses only M3 nuts and not M5 (I only discovered this after", "M3 nuts and not M5 (I only discovered this after purchasing the printed", "- not through lack of research, but because there is no available list", "to the endstops). *Note that I am only interested in the fasteners specifically", "fasteners specifically for the Sintron Kossel and not the Kossel in general.** The", "I am only interested in the fasteners specifically for the Sintron Kossel and", "[product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states only \"screws and nuts provided\"; * Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but", "nut to use (see [Fat hexagonal M3 nuts, with outer diameter greater than", "the Sintron Kossel. --- Has anyone bought this kit, and knows the answer,", "which: * fasten the PCB mounted mechanical switches to the PLA rectangular end", "fasten the PCB mounted mechanical switches and the PLA rectangular end stop spacers/holders", "but in particular, I need the dimensions (M2.5/3/4/5? and length) and quantity of", "no list contained therein, nor contains details about the fasteners relating to the", "the [Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there is no list contained therein, nor contains", "but that also has no list (as well as not being relevant with", "hexagonal M3 nuts, with outer diameter greater than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here is a", "unbelievably difficult to find the standard 2020 extrusion in Bangkok). Combine that with", "additional complication. The profile of the non-standard/non-\"European\" 2020 extrusion that I am using,", "3D printed parts from Sintron, and I am sourcing the rest of the", "mechanical switches to the PLA rectangular end stop spacers/holders, and; * fasten the", "the Kossel in general.** The Sintron uses the PCB mounted mechanical switches (with", "to the endstops, and; * Obtained the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which the Sintron", "the Sintron Kossel* and not the Kossel in general.** The Sintron uses the", "but because there is no available list of fasteners), then I have the", "printed parts from Sintron, and I am sourcing the rest of the parts", "nuts and not M5 (I only discovered this after purchasing the printed parts", "OpenBeam: [![Endstops and PCB mounted mechanical switches for the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because", "problem of finding a nut to use (see [Fat hexagonal M3 nuts, with", "anyone bought this kit, and knows the answer, or knows where this is", "the fasteners relating to the endstops, and; * Obtained the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from", "I am using, does not take T-Nuts, only M5 hexagonal nuts (it is", "non-standard/non-\"European\" 2020 extrusion that I am using, does not take T-Nuts, only M5", "Kossel. --- Has anyone bought this kit, and knows the answer, or knows", "with outer diameter greater than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here is a photo [![Four pieces", "nor contains details about the fasteners relating to the endstops, and; Obtained", "extruded 2020 aluminium. I have: * Searched the web, but to no avail;", "(and nuts) which: * fasten the PCB mounted mechanical switches to the PLA", "mechanical switches and the PLA rectangular end stop spacers/holders to the extruded 2020", "--- Has anyone bought this kit, and knows the answer, or knows where", "in Bangkok). Combine that with the fact that the Sintron kit uses only", "printed parts kit (see the email from Sintron, in my answer below) -", "locally or from Chinese suppliers on eBay. --- 1 In my particular case,", "is no list contained therein, nor contains details about the fasteners relating to", "standard 2020 extrusion in Bangkok). Combine that with the fact that the Sintron", "about the fasteners relating to the endstops, and; * Obtained the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf),", "page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states only \"screws and nuts provided\"; * Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not", "the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states only \"screws and nuts provided\"; * Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa),", "answer, or knows where this is documented? A complete list would be great,", "the 3D printed parts from Sintron, and I am sourcing the rest of", "and washers) for the Sintron Kossel. --- Has anyone bought this kit, and", "* fasten the PCB mounted mechanical switches to the PLA rectangular end stop", "Chinese suppliers on eBay. --- 1 In my particular case, there is an", "In my particular case, there is an additional complication. The profile of the", "and uses 2020 aluminium1, not 1515 OpenBeam: [![Endstops and PCB mounted mechanical switches", "parts cheaply, either locally or from Chinese suppliers on eBay. --- 1 In", "holes), and not the simple barebones mechanical switches (with two holes), and uses", "Kossel in general.** The Sintron uses the PCB mounted mechanical switches (with four", "no avail; * Read the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states only \"screws and nuts", "kit, and knows the answer, or knows where this is documented? A complete", "PCB mounted mechanical switches and the PLA rectangular end stop spacers/holders to the", "(see the email from Sintron, in my answer below) - not through lack", "the Sintron manual is copied, but that also has no list (as well", "Sintron Kossel. --- Has anyone bought this kit, and knows the answer, or", "not M5 (I only discovered this after purchasing the printed parts kit (see", "a complete list of fasteners (bolts, nuts and washers) for the Sintron Kossel.", "mechanical switches (with two holes), and uses 2020 aluminium1, not 1515 OpenBeam: [![Endstops", "PLA rectangular end stop spacers/holders to the extruded 2020 aluminium. I have: ", "particular case, there is an additional complication. The profile of the non-standard/non-\"European\" 2020", "and; Obtained the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which the Sintron manual is copied,", "extrusion in Bangkok). Combine that with the fact that the Sintron kit uses", "where this is documented? A complete list would be great, but in particular,", "the parts cheaply, either locally or from Chinese suppliers on eBay. --- 1", "specifically for the Sintron Kossel and not the Kossel in general. The Sintron", "holes), and uses 2020 aluminium1, not 1515 OpenBeam: [![Endstops and PCB mounted mechanical", "relevant with respect to the endstops). Note that I am only interested in", "from Chinese suppliers on eBay. --- 1 In my particular case, there is", "is unbelievably difficult to find the standard 2020 extrusion in Bangkok). Combine that", "fasteners), then I have the problem of finding a nut to use (see", "A complete list would be great, but in particular, I need the dimensions", "M5 hexagonal nuts (it is unbelievably difficult to find the standard 2020 extrusion", "relating to the endstops, and; * Obtained the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which the", "from Sintron, and I am sourcing the rest of the parts cheaply, either", "after purchasing the printed parts kit (see the email from Sintron, in my", "than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here is a photo [![Four pieces of 2020 Aluminium extrusion](https://i.stack.imgur.com/UgSHu.jpg)](https://i.stack.imgur.com/UgSHu.jpg)", "I am sourcing the rest of the parts cheaply, either locally or from", "lack of research, but because there is no available list of fasteners), then", "list of fasteners (bolts, nuts and washers) for the Sintron Kossel. --- Has", "not 1515 OpenBeam: [![Endstops and PCB mounted mechanical switches for the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png)", "the PCB mounted mechanical switches and the PLA rectangular end stop spacers/holders to", "the problem of finding a nut to use (see [Fat hexagonal M3 nuts,", "avail; * Read the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states only \"screws and nuts provided\";", "great, but in particular, I need the dimensions (M2.5/3/4/5? and length) and quantity", "manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which the Sintron manual is copied, but that also has no", "[Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which the Sintron manual is copied, but that also has", "be great, but in particular, I need the dimensions (M2.5/3/4/5? and length) and", "the bolts (and nuts) which: * fasten the PCB mounted mechanical switches to", "copied, but that also has no list (as well as not being relevant", "the endstops). *Note that I am only interested in the fasteners specifically for", "(with two holes), and uses 2020 aluminium1, not 1515 OpenBeam: [![Endstops and PCB", "using, does not take T-Nuts, only M5 hexagonal nuts (it is unbelievably difficult", "because there is no available list of fasteners), then I have the problem", "is no available list of fasteners), then I have the problem of finding", "there is no available list of fasteners), then I have the problem of", "bought this kit, and knows the answer, or knows where this is documented?", "research, but because there is no available list of fasteners), then I have", "end stop spacers/holders, and; * fasten the PCB mounted mechanical switches and the", "mechanical switches for the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because I purchased only the 3D", "(with four holes), and not the simple barebones mechanical switches (with two holes),", "uses the PCB mounted mechanical switches (with four holes), and not the simple", "and I am sourcing the rest of the parts cheaply, either locally or", "endstops, and; * Obtained the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which the Sintron manual is", "have the problem of finding a nut to use (see [Fat hexagonal M3", "rest of the parts cheaply, either locally or from Chinese suppliers on eBay.", "am using, does not take T-Nuts, only M5 hexagonal nuts (it is unbelievably", "available list of fasteners), then I have the problem of finding a nut", "an answer; * Obtained the [Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there is no list", "is documented? A complete list would be great, but in particular, I need", "hexagonal nuts (it is unbelievably difficult to find the standard 2020 extrusion in", "difficult to find the standard 2020 extrusion in Bangkok). Combine that with the", "[Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there is no list contained therein, nor contains details", "nuts provided\"; * Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not had an answer; * Obtained the", "which states only \"screws and nuts provided\"; * Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not had", "use (see [Fat hexagonal M3 nuts, with outer diameter greater than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)).", "fasteners relating to the endstops, and; * Obtained the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which", "I purchased only the 3D printed parts from Sintron, and I am sourcing", "the standard 2020 extrusion in Bangkok). Combine that with the fact that the", "and quantity of the bolts (and nuts) which: * fasten the PCB mounted", "Combine that with the fact that the Sintron kit uses only M3 nuts", "that I am only interested in the fasteners specifically for the Sintron Kossel", "2020 extrusion in Bangkok). Combine that with the fact that the Sintron kit", "no available list of fasteners), then I have the problem of finding a", "knows where this is documented? A complete list would be great, but in", "end stop spacers/holders to the extruded 2020 aluminium. I have: * Searched the", "and not M5 (I only discovered this after purchasing the printed parts kit", "the endstops, and; * Obtained the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which the Sintron manual", "and not the Kossel in general.** The Sintron uses the PCB mounted mechanical", "only M5 hexagonal nuts (it is unbelievably difficult to find the standard 2020", "### TL;DR I need a complete list of fasteners (bolts, nuts and washers)", "switches (with four holes), and not the simple barebones mechanical switches (with two", "mounted mechanical switches to the PLA rectangular end stop spacers/holders, and; * fasten", "Why? Because I purchased only the 3D printed parts from Sintron, and I", "two holes), and uses 2020 aluminium1, not 1515 OpenBeam: [![Endstops and PCB mounted", "and knows the answer, or knows where this is documented? A complete list", "* fasten the PCB mounted mechanical switches and the PLA rectangular end stop", "fasteners (bolts, nuts and washers) for the Sintron Kossel. --- Has anyone bought", "2020 aluminium. I have: * Searched the web, but to no avail; ", "the fact that the Sintron kit uses only M3 nuts and not* M5", "to no avail; * Read the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states only \"screws and", "knows the answer, or knows where this is documented? A complete list would", "a nut to use (see [Fat hexagonal M3 nuts, with outer diameter greater", "(M2.5/3/4/5? and length) and quantity of the bolts (and nuts) which: * fasten", "the answer, or knows where this is documented? A complete list would be", "list (as well as not being relevant with respect to the endstops). *Note", "parts kit (see the email from Sintron, in my answer below) - not", "contains details about the fasteners relating to the endstops, and; Obtained the", "with the fact that the Sintron kit uses only M3 nuts and not", "Bangkok). Combine that with the fact that the Sintron kit uses only M3", "from which the Sintron manual is copied, but that also has no list", "1 In my particular case, there is an additional complication. The profile of", "am sourcing the rest of the parts cheaply, either locally or from Chinese", "general. The Sintron uses the PCB mounted mechanical switches (with four holes), and", "Because I purchased only the 3D printed parts from Sintron, and I am", "for the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because I purchased only the 3D printed parts", "being relevant with respect to the endstops). Note that I am only interested", "(I only discovered this after purchasing the printed parts kit (see the email", "for the Sintron Kossel. --- Has anyone bought this kit, and knows the", "that I am using, does not take T-Nuts, only M5 hexagonal nuts (it", "switches (with two holes), and uses 2020 aluminium1, not 1515 OpenBeam: [![Endstops and", "list contained therein, nor contains details about the fasteners relating to the endstops,", "not take T-Nuts, only M5 hexagonal nuts (it is unbelievably difficult to find", "fasten the PCB mounted mechanical switches to the PLA rectangular end stop spacers/holders,", "had an answer; * Obtained the [Sintron build manual](https://www.dropbox.com/s/iifhhmistuwfja1/Kossel%20mini%20instrution%20by%20sintron%20technology_v2.pdf?dl=0) but there is no", "of the non-standard/non-\"European\" 2020 extrusion that I am using, does not take T-Nuts,", "PCB mounted mechanical switches to the PLA rectangular end stop spacers/holders, and; ", "(bolts, nuts and washers) for the Sintron Kossel. --- Has anyone bought this", "in the fasteners specifically for the Sintron Kossel* and not the Kossel in", "of the bolts (and nuts) which: * fasten the PCB mounted mechanical switches", "complication. The profile of the non-standard/non-\"European\" 2020 extrusion that I am using, does", "kit (see the email from Sintron, in my answer below) - not through", "the simple barebones mechanical switches (with two holes), and uses 2020 aluminium1, not", "or knows where this is documented? A complete list would be great, but", "and PCB mounted mechanical switches for the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because I purchased", "finding a nut to use (see [Fat hexagonal M3 nuts, with outer diameter", "Sintron, and I am sourcing the rest of the parts cheaply, either locally", "(see [Fat hexagonal M3 nuts, with outer diameter greater than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here", "the extruded 2020 aluminium. I have: * Searched the web, but to no", "greater than 6 mm](https://engineering.stackexchange.com/questions/15628/fat-hexagonal-m3-nuts-with-outer-diameter-greater-than-6-mm)). Here is a photo [![Four pieces of 2020 Aluminium", "* Obtained the [Blomker manual](http://www.robotdigg.com/upload/pdf/2a823cc8a8dcff9da99cce92710cc745.pdf), from which the Sintron manual is copied, but", "there is no list contained therein, nor contains details about the fasteners relating", "The profile of the non-standard/non-\"European\" 2020 extrusion that I am using, does not", "nuts (it is unbelievably difficult to find the standard 2020 extrusion in Bangkok).", "list would be great, but in particular, I need the dimensions (M2.5/3/4/5? and", "washers) for the Sintron Kossel. --- Has anyone bought this kit, and knows", "details about the fasteners relating to the endstops, and; * Obtained the [Blomker", "mechanical switches (with four holes), and not the simple barebones mechanical switches (with", "four holes), and not the simple barebones mechanical switches (with two holes), and", "but to no avail; * Read the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states only \"screws", "2020 extrusion that I am using, does not take T-Nuts, only M5 hexagonal", "of research, but because there is no available list of fasteners), then I", "I need the dimensions (M2.5/3/4/5? and length) and quantity of the bolts (and", "Kossel* and not the Kossel in general.** The Sintron uses the PCB mounted", "discovered this after purchasing the printed parts kit (see the email from Sintron,", "to use (see [Fat hexagonal M3 nuts, with outer diameter greater than 6", "states only \"screws and nuts provided\"; * Contacted [Sintron](http://www.ebay.co.uk/usr/sintron_tech_usa), but not had an", "T-Nuts, only M5 hexagonal nuts (it is unbelievably difficult to find the standard", "parts from Sintron, and I am sourcing the rest of the parts cheaply,", "of finding a nut to use (see [Fat hexagonal M3 nuts, with outer", "an additional complication. The profile of the non-standard/non-\"European\" 2020 extrusion that I am", "the non-standard/non-\"European\" 2020 extrusion that I am using, does not take T-Nuts, only", "therein, nor contains details about the fasteners relating to the endstops, and; ", "switches for the Sintron Kossel](https://i.stack.imgur.com/Lr1BU.png)](https://i.stack.imgur.com/Lr1BU.png) Why? Because I purchased only the 3D printed", "well as not being relevant with respect to the endstops). Note that I", "need the dimensions (M2.5/3/4/5? and length) and quantity of the bolts (and nuts)", "the web, but to no avail; Read the [product page](http://www.ebay.co.uk/itm/Sintron-3D-Printer-Kossel-Mini-Full-Set-w-Auto-level-for-RepRap-Rostock-Delta-/181845082062), which states", "also has no list (as well as not being relevant with respect to", "only discovered this after purchasing the printed parts kit (see the email from", "as not being relevant with respect to the endstops). *Note that I am", "cheaply, either locally or from Chinese suppliers on eBay. --- 1 In my", "PLA rectangular end stop spacers/holders, and; fasten the PCB mounted mechanical switches", "that the Sintron kit uses only M3 nuts and not M5 (I only", "has no list (as well as not being relevant with respect to the", "the printed parts kit (see the email from Sintron, in my answer below)", "for the Sintron Kossel* and not the Kossel in general.** The Sintron uses", "PCB mounted mechanical switches (with four holes), and not the simple barebones mechanical", "that with the fact that the Sintron kit uses only M3 nuts and", "to find the standard 2020 extrusion in Bangkok). Combine that with the fact" ]
[ "board and dual extruders. I am running Marlin RC8 Tevo Community build for", "on this, I am still getting familiar with G-code and Marlin. I have", "stop at the set temperature. I checked the MOSFET and there is no", "board is being referenced in firmware from `boards.h` but looking at `configuration.h` I", "I just get confused. What I am thinking is somehow/somewhere `E1` might be", "work and give accurate reading but `E1` when activated runs at 100% until", "firmware from `boards.h` but looking at `configuration.h` I just get confused. What I", "proper temperatures through the thermistor it just won’t stop at the set temperature.", "accurate reading but `E1` when activated runs at 100% until the overtemps kicks", "checked the MOSFET and there is no obvious scorching or bad solder joints", "somehow/somewhere `E1` might be referenced as a fan that is just off or", "All temperature sensors work and give accurate reading but `E1` when activated runs", "won’t stop at the set temperature. I checked the MOSFET and there is", "temperature sensors work and give accurate reading but `E1` when activated runs at", "just get confused. What I am thinking is somehow/somewhere `E1` might be referenced", "sensors work and give accurate reading but `E1` when activated runs at 100%", "shuts down the system. Like I said, it reads proper temperatures through the", "joints on the MKS board. This leads me to believe it is a", "Tarantula with a MKS Base 1.5 board and dual extruders. I am running", "temperatures through the thermistor it just won’t stop at the set temperature. I", "the system. Like I said, it reads proper temperatures through the thermistor it", "the thermistor it just won’t stop at the set temperature. I checked the", "obvious scorching or bad solder joints on the MKS board. This leads me", "scorching or bad solder joints on the MKS board. This leads me to", "is no obvious scorching or bad solder joints on the MKS board. This", "get confused. What I am thinking is somehow/somewhere `E1` might be referenced as", "a bit of a newbie on this, I am still getting familiar with", "familiar with G-code and Marlin. I have confirmed the correct board is being", "100% until the overtemps kicks in and shuts down the system. Like I", "bed and SN04 sensor. All temperature sensors work and give accurate reading but", "bad solder joints on the MKS board. This leads me to believe it", "reads proper temperatures through the thermistor it just won’t stop at the set", "set temperature. I checked the MOSFET and there is no obvious scorching or", "G-code and Marlin. I have confirmed the correct board is being referenced in", "bit of a newbie on this, I am still getting familiar with G-code", "but `E1` when activated runs at 100% until the overtemps kicks in and", "activated runs at 100% until the overtemps kicks in and shuts down the", "have a Tevo Tarantula with a MKS Base 1.5 board and dual extruders.", "being referenced in firmware from `boards.h` but looking at `configuration.h` I just get", "SN04 sensor. All temperature sensors work and give accurate reading but `E1` when", "with a MKS Base 1.5 board and dual extruders. I am running Marlin", "through the thermistor it just won’t stop at the set temperature. I checked", "at 100% until the overtemps kicks in and shuts down the system. Like", "am still getting familiar with G-code and Marlin. I have confirmed the correct", "have confirmed the correct board is being referenced in firmware from `boards.h` but", "is a mix-up in firmware but, being a bit of a newbie on", "the dual extruder, large bed and SN04 sensor. All temperature sensors work and", "and give accurate reading but `E1` when activated runs at 100% until the", "Community build for the dual extruder, large bed and SN04 sensor. All temperature", "there is no obvious scorching or bad solder joints on the MKS board.", "when activated runs at 100% until the overtemps kicks in and shuts down", "I said, it reads proper temperatures through the thermistor it just won’t stop", "being a bit of a newbie on this, I am still getting familiar", "and shuts down the system. Like I said, it reads proper temperatures through", "a newbie on this, I am still getting familiar with G-code and Marlin.", "in and shuts down the system. Like I said, it reads proper temperatures", "at the set temperature. I checked the MOSFET and there is no obvious", "correct board is being referenced in firmware from `boards.h` but looking at `configuration.h`", "dual extruders. I am running Marlin RC8 Tevo Community build for the dual", "is being referenced in firmware from `boards.h` but looking at `configuration.h` I just", "thinking is somehow/somewhere `E1` might be referenced as a fan that is just", "be referenced as a fan that is just off or on. Anybody have", "RC8 Tevo Community build for the dual extruder, large bed and SN04 sensor.", "large bed and SN04 sensor. All temperature sensors work and give accurate reading", "Tevo Community build for the dual extruder, large bed and SN04 sensor. All", "MKS board. This leads me to believe it is a mix-up in firmware", "down the system. Like I said, it reads proper temperatures through the thermistor", "and dual extruders. I am running Marlin RC8 Tevo Community build for the", "for the dual extruder, large bed and SN04 sensor. All temperature sensors work", "or bad solder joints on the MKS board. This leads me to believe", "in firmware but, being a bit of a newbie on this, I am", "I am running Marlin RC8 Tevo Community build for the dual extruder, large", "Marlin RC8 Tevo Community build for the dual extruder, large bed and SN04", "What I am thinking is somehow/somewhere `E1` might be referenced as a fan", "a mix-up in firmware but, being a bit of a newbie on this,", "might be referenced as a fan that is just off or on. Anybody", "leads me to believe it is a mix-up in firmware but, being a", "the correct board is being referenced in firmware from `boards.h` but looking at", "build for the dual extruder, large bed and SN04 sensor. All temperature sensors", "solder joints on the MKS board. This leads me to believe it is", "with G-code and Marlin. I have confirmed the correct board is being referenced", "and Marlin. I have confirmed the correct board is being referenced in firmware", "MKS Base 1.5 board and dual extruders. I am running Marlin RC8 Tevo", "reading but `E1` when activated runs at 100% until the overtemps kicks in", "it just won’t stop at the set temperature. I checked the MOSFET and", "from `boards.h` but looking at `configuration.h` I just get confused. What I am", "This leads me to believe it is a mix-up in firmware but, being", "firmware but, being a bit of a newbie on this, I am still", "`configuration.h` I just get confused. What I am thinking is somehow/somewhere `E1` might", "MOSFET and there is no obvious scorching or bad solder joints on the", "runs at 100% until the overtemps kicks in and shuts down the system.", "I have a Tevo Tarantula with a MKS Base 1.5 board and dual", "`boards.h` but looking at `configuration.h` I just get confused. What I am thinking", "me to believe it is a mix-up in firmware but, being a bit", "referenced as a fan that is just off or on. Anybody have ideas?", "confirmed the correct board is being referenced in firmware from `boards.h` but looking", "am thinking is somehow/somewhere `E1` might be referenced as a fan that is", "Tevo Tarantula with a MKS Base 1.5 board and dual extruders. I am", "said, it reads proper temperatures through the thermistor it just won’t stop at", "still getting familiar with G-code and Marlin. I have confirmed the correct board", "until the overtemps kicks in and shuts down the system. Like I said,", "this, I am still getting familiar with G-code and Marlin. I have confirmed", "confused. What I am thinking is somehow/somewhere `E1` might be referenced as a", "extruder, large bed and SN04 sensor. All temperature sensors work and give accurate", "the MOSFET and there is no obvious scorching or bad solder joints on", "I have confirmed the correct board is being referenced in firmware from `boards.h`", "is somehow/somewhere `E1` might be referenced as a fan that is just off", "dual extruder, large bed and SN04 sensor. All temperature sensors work and give", "kicks in and shuts down the system. Like I said, it reads proper", "the MKS board. This leads me to believe it is a mix-up in", "thermistor it just won’t stop at the set temperature. I checked the MOSFET", "temperature. I checked the MOSFET and there is no obvious scorching or bad", "newbie on this, I am still getting familiar with G-code and Marlin. I", "Like I said, it reads proper temperatures through the thermistor it just won’t", "`E1` when activated runs at 100% until the overtemps kicks in and shuts", "Base 1.5 board and dual extruders. I am running Marlin RC8 Tevo Community", "sensor. All temperature sensors work and give accurate reading but `E1` when activated", "getting familiar with G-code and Marlin. I have confirmed the correct board is", "the set temperature. I checked the MOSFET and there is no obvious scorching", "mix-up in firmware but, being a bit of a newbie on this, I", "give accurate reading but `E1` when activated runs at 100% until the overtemps", "I checked the MOSFET and there is no obvious scorching or bad solder", "system. Like I said, it reads proper temperatures through the thermistor it just", "a Tevo Tarantula with a MKS Base 1.5 board and dual extruders. I", "board. This leads me to believe it is a mix-up in firmware but,", "`E1` might be referenced as a fan that is just off or on.", "but, being a bit of a newbie on this, I am still getting", "to believe it is a mix-up in firmware but, being a bit of", "just won’t stop at the set temperature. I checked the MOSFET and there", "and there is no obvious scorching or bad solder joints on the MKS", "and SN04 sensor. All temperature sensors work and give accurate reading but `E1`", "referenced in firmware from `boards.h` but looking at `configuration.h` I just get confused.", "on the MKS board. This leads me to believe it is a mix-up", "but looking at `configuration.h` I just get confused. What I am thinking is", "believe it is a mix-up in firmware but, being a bit of a", "running Marlin RC8 Tevo Community build for the dual extruder, large bed and", "1.5 board and dual extruders. I am running Marlin RC8 Tevo Community build", "I am thinking is somehow/somewhere `E1` might be referenced as a fan that", "in firmware from `boards.h` but looking at `configuration.h` I just get confused. What", "extruders. I am running Marlin RC8 Tevo Community build for the dual extruder,", "of a newbie on this, I am still getting familiar with G-code and", "a MKS Base 1.5 board and dual extruders. I am running Marlin RC8", "the overtemps kicks in and shuts down the system. Like I said, it", "I am still getting familiar with G-code and Marlin. I have confirmed the", "no obvious scorching or bad solder joints on the MKS board. This leads", "it is a mix-up in firmware but, being a bit of a newbie", "looking at `configuration.h` I just get confused. What I am thinking is somehow/somewhere", "at `configuration.h` I just get confused. What I am thinking is somehow/somewhere `E1`", "am running Marlin RC8 Tevo Community build for the dual extruder, large bed", "Marlin. I have confirmed the correct board is being referenced in firmware from", "it reads proper temperatures through the thermistor it just won’t stop at the", "overtemps kicks in and shuts down the system. Like I said, it reads" ]
[ "in the dark. What are the specific characteristics of a first layer raft,", "to a first layer of my print, that might make it stick better?", "to get better adhesion, since I know rafts stick fine with what I", "lay down a nice line for the skirt / first layer. With rafts", "even the skirt (which sticks fine on the raft print). With rafts on,", "When rafts are on, my print sticks perfectly. When rafts are off, my", "the PEI surface it shipped with. I haven't tried any bed additions/changes to", "out of the nozzle and ride along with the print head, not sticking", "for testing) with the same settings, except I am turning rafts on/off. When", "my bed, but had great reliability when use rafts. This didn't present a", "some settings I can change to make my first layer stick too. I", "fine with what I have. I figure there must be some settings I", "With rafts on, I can watch my printer lay down a nice line", "is very hard to remove rafts, so I am once again trying to", "be some settings I can change to make my first layer stick too.", "great reliability when use rafts. This didn't present a problem when I was", "of the nozzle and ride along with the print head, not sticking to", "must be some settings I can change to make my first layer stick", "trying to figure out whats wrong. I am printing the same file (currently", "haven't tried any bed additions/changes to get better adhesion, since I know rafts", "first layer stick too. I am using Simplify3D & have tried a few", "had great reliability when use rafts. This didn't present a problem when I", "am largely stabbing in the dark. What are the specific characteristics of a", "rafts on/off. When rafts are on, my print sticks perfectly. When rafts are", "the plate at all. I have a stock Monoprice Maker Select v2 with", "I haven't tried any bed additions/changes to get better adhesion, since I know", "the same settings, except I am turning rafts on/off. When rafts are on,", "there must be some settings I can change to make my first layer", "When rafts are off, my print doesn't stick at all - not even", "wrong. I am printing the same file (currently a simple square for testing)", "my printer lay down a nice line for the skirt / first layer.", "I figure there must be some settings I can change to make my", "watched plastic ooze out of the nozzle and ride along with the print", "v2 with the PEI surface it shipped with. I haven't tried any bed", "stick fine with what I have. I figure there must be some settings", "testing) with the same settings, except I am turning rafts on/off. When rafts", "I am turning rafts on/off. When rafts are on, my print sticks perfectly.", "am using Simplify3D & have tried a few basic tweaks, but I am", "all. I have a stock Monoprice Maker Select v2 with the PEI surface", "have. I figure there must be some settings I can change to make", "print sticks perfectly. When rafts are off, my print doesn't stick at all", "I am once again trying to figure out whats wrong. I am printing", "what I have. I figure there must be some settings I can change", "basic tweaks, but I am largely stabbing in the dark. What are the", "not sticking to the plate at all. I have a stock Monoprice Maker", "am printing the same file (currently a simple square for testing) with the", "on my bed, but had great reliability when use rafts. This didn't present", "figure there must be some settings I can change to make my first", "didn't present a problem when I was using PLA, but I recently got", "sticks perfectly. When rafts are off, my print doesn't stick at all -", "have a stock Monoprice Maker Select v2 with the PEI surface it shipped", "plastic ooze out of the nozzle and ride along with the print head,", "are the specific characteristics of a first layer raft, in comparison to a", "but I recently got a roll of PETG and it is very hard", "plate at all. I have a stock Monoprice Maker Select v2 with the", "down a nice line for the skirt / first layer. With rafts off,", "to stick directly on my bed, but had great reliability when use rafts.", "use rafts. This didn't present a problem when I was using PLA, but", "on the raft print). With rafts on, I can watch my printer lay", "I know rafts stick fine with what I have. I figure there must", "PETG and it is very hard to remove rafts, so I am once", "I am using Simplify3D & have tried a few basic tweaks, but I", "figure out whats wrong. I am printing the same file (currently a simple", "first layer. With rafts off, I watched plastic ooze out of the nozzle", "better adhesion, since I know rafts stick fine with what I have. I", "whats wrong. I am printing the same file (currently a simple square for", "rafts stick fine with what I have. I figure there must be some", "Select v2 with the PEI surface it shipped with. I haven't tried any", "simple square for testing) with the same settings, except I am turning rafts", "Monoprice Maker Select v2 with the PEI surface it shipped with. I haven't", "settings I can change to make my first layer stick too. I am", "line for the skirt / first layer. With rafts off, I watched plastic", "present a problem when I was using PLA, but I recently got a", "make my first layer stick too. I am using Simplify3D & have tried", "along with the print head, not sticking to the plate at all. I", "have tried a few basic tweaks, but I am largely stabbing in the", "problem when I was using PLA, but I recently got a roll of", "a roll of PETG and it is very hard to remove rafts, so", "I recently got a roll of PETG and it is very hard to", "same settings, except I am turning rafts on/off. When rafts are on, my", "to remove rafts, so I am once again trying to figure out whats", "first layer raft, in comparison to a first layer of my print, that", "stick directly on my bed, but had great reliability when use rafts. This", "shipped with. I haven't tried any bed additions/changes to get better adhesion, since", "and ride along with the print head, not sticking to the plate at", "the same file (currently a simple square for testing) with the same settings,", "same file (currently a simple square for testing) with the same settings, except", "rafts. This didn't present a problem when I was using PLA, but I", "are on, my print sticks perfectly. When rafts are off, my print doesn't", "settings, except I am turning rafts on/off. When rafts are on, my print", "raft print). With rafts on, I can watch my printer lay down a", "rafts are on, my print sticks perfectly. When rafts are off, my print", "to make my first layer stick too. I am using Simplify3D & have", "layer raft, in comparison to a first layer of my print, that might", "turning rafts on/off. When rafts are on, my print sticks perfectly. When rafts", "with the PEI surface it shipped with. I haven't tried any bed additions/changes", "of a first layer raft, in comparison to a first layer of my", "the skirt / first layer. With rafts off, I watched plastic ooze out", "it is very hard to remove rafts, so I am once again trying", "print). With rafts on, I can watch my printer lay down a nice", "a nice line for the skirt / first layer. With rafts off, I", "of PETG and it is very hard to remove rafts, so I am", "printer lay down a nice line for the skirt / first layer. With", "the print head, not sticking to the plate at all. I have a", "a problem when I was using PLA, but I recently got a roll", "additions/changes to get better adhesion, since I know rafts stick fine with what", "adhesion, since I know rafts stick fine with what I have. I figure", "stock Monoprice Maker Select v2 with the PEI surface it shipped with. I", "comparison to a first layer of my print, that might make it stick", "a first layer raft, in comparison to a first layer of my print,", "layer. With rafts off, I watched plastic ooze out of the nozzle and", "print doesn't stick at all - not even the skirt (which sticks fine", "a stock Monoprice Maker Select v2 with the PEI surface it shipped with.", "and it is very hard to remove rafts, so I am once again", "surface it shipped with. I haven't tried any bed additions/changes to get better", "the specific characteristics of a first layer raft, in comparison to a first", "the skirt (which sticks fine on the raft print). With rafts on, I", "printing the same file (currently a simple square for testing) with the same", "stick too. I am using Simplify3D & have tried a few basic tweaks,", "except I am turning rafts on/off. When rafts are on, my print sticks", "few basic tweaks, but I am largely stabbing in the dark. What are", "raft, in comparison to a first layer of my print, that might make", "using Simplify3D & have tried a few basic tweaks, but I am largely", "bed additions/changes to get better adhesion, since I know rafts stick fine with", "bed, but had great reliability when use rafts. This didn't present a problem", "specific characteristics of a first layer raft, in comparison to a first layer", "on/off. When rafts are on, my print sticks perfectly. When rafts are off,", "I have. I figure there must be some settings I can change to", "with what I have. I figure there must be some settings I can", "I have a stock Monoprice Maker Select v2 with the PEI surface it", "rafts on, I can watch my printer lay down a nice line for", "am once again trying to figure out whats wrong. I am printing the", "With rafts off, I watched plastic ooze out of the nozzle and ride", "tried a few basic tweaks, but I am largely stabbing in the dark.", "reliability when use rafts. This didn't present a problem when I was using", "perfectly. When rafts are off, my print doesn't stick at all - not", "with. I haven't tried any bed additions/changes to get better adhesion, since I", "the nozzle and ride along with the print head, not sticking to the", "What are the specific characteristics of a first layer raft, in comparison to", "but had great reliability when use rafts. This didn't present a problem when", "so I am once again trying to figure out whats wrong. I am", "was using PLA, but I recently got a roll of PETG and it", "fine on the raft print). With rafts on, I can watch my printer", "ride along with the print head, not sticking to the plate at all.", "sticking to the plate at all. I have a stock Monoprice Maker Select", "sticks fine on the raft print). With rafts on, I can watch my", "nice line for the skirt / first layer. With rafts off, I watched", "square for testing) with the same settings, except I am turning rafts on/off.", "skirt / first layer. With rafts off, I watched plastic ooze out of", "stick at all - not even the skirt (which sticks fine on the", "know rafts stick fine with what I have. I figure there must be", "I am printing the same file (currently a simple square for testing) with", "getting prints to stick directly on my bed, but had great reliability when", "my print doesn't stick at all - not even the skirt (which sticks", "with the print head, not sticking to the plate at all. I have", "get better adhesion, since I know rafts stick fine with what I have.", "I can change to make my first layer stick too. I am using", "remove rafts, so I am once again trying to figure out whats wrong.", "PEI surface it shipped with. I haven't tried any bed additions/changes to get", "got a roll of PETG and it is very hard to remove rafts,", "for the skirt / first layer. With rafts off, I watched plastic ooze", "rafts are off, my print doesn't stick at all - not even the", "- not even the skirt (which sticks fine on the raft print). With", "Simplify3D & have tried a few basic tweaks, but I am largely stabbing", "/ first layer. With rafts off, I watched plastic ooze out of the", "once again trying to figure out whats wrong. I am printing the same", "all - not even the skirt (which sticks fine on the raft print).", "recently got a roll of PETG and it is very hard to remove", "I am largely stabbing in the dark. What are the specific characteristics of", "rafts off, I watched plastic ooze out of the nozzle and ride along", "very hard to remove rafts, so I am once again trying to figure", "& have tried a few basic tweaks, but I am largely stabbing in", "print head, not sticking to the plate at all. I have a stock", "am turning rafts on/off. When rafts are on, my print sticks perfectly. When", "to figure out whats wrong. I am printing the same file (currently a", "tweaks, but I am largely stabbing in the dark. What are the specific", "(which sticks fine on the raft print). With rafts on, I can watch", "my first layer stick too. I am using Simplify3D & have tried a", "on, my print sticks perfectly. When rafts are off, my print doesn't stick", "I've always had trouble getting prints to stick directly on my bed, but", "nozzle and ride along with the print head, not sticking to the plate", "a simple square for testing) with the same settings, except I am turning", "largely stabbing in the dark. What are the specific characteristics of a first", "watch my printer lay down a nice line for the skirt / first", "directly on my bed, but had great reliability when use rafts. This didn't", "skirt (which sticks fine on the raft print). With rafts on, I can", "can watch my printer lay down a nice line for the skirt /", "to the plate at all. I have a stock Monoprice Maker Select v2", "a few basic tweaks, but I am largely stabbing in the dark. What", "it shipped with. I haven't tried any bed additions/changes to get better adhesion,", "change to make my first layer stick too. I am using Simplify3D &", "PLA, but I recently got a roll of PETG and it is very", "layer stick too. I am using Simplify3D & have tried a few basic", "dark. What are the specific characteristics of a first layer raft, in comparison", "in comparison to a first layer of my print, that might make it", "(currently a simple square for testing) with the same settings, except I am", "but I am largely stabbing in the dark. What are the specific characteristics", "with the same settings, except I am turning rafts on/off. When rafts are", "my print sticks perfectly. When rafts are off, my print doesn't stick at", "off, I watched plastic ooze out of the nozzle and ride along with", "doesn't stick at all - not even the skirt (which sticks fine on", "are off, my print doesn't stick at all - not even the skirt", "again trying to figure out whats wrong. I am printing the same file", "hard to remove rafts, so I am once again trying to figure out", "not even the skirt (which sticks fine on the raft print). With rafts", "the raft print). With rafts on, I can watch my printer lay down", "the dark. What are the specific characteristics of a first layer raft, in", "when use rafts. This didn't present a problem when I was using PLA,", "since I know rafts stick fine with what I have. I figure there", "can change to make my first layer stick too. I am using Simplify3D", "too. I am using Simplify3D & have tried a few basic tweaks, but", "I can watch my printer lay down a nice line for the skirt", "had trouble getting prints to stick directly on my bed, but had great", "out whats wrong. I am printing the same file (currently a simple square", "Maker Select v2 with the PEI surface it shipped with. I haven't tried", "I watched plastic ooze out of the nozzle and ride along with the", "always had trouble getting prints to stick directly on my bed, but had", "at all. I have a stock Monoprice Maker Select v2 with the PEI", "at all - not even the skirt (which sticks fine on the raft", "any bed additions/changes to get better adhesion, since I know rafts stick fine", "off, my print doesn't stick at all - not even the skirt (which", "on, I can watch my printer lay down a nice line for the", "stabbing in the dark. What are the specific characteristics of a first layer", "rafts, so I am once again trying to figure out whats wrong. I", "file (currently a simple square for testing) with the same settings, except I", "when I was using PLA, but I recently got a roll of PETG", "head, not sticking to the plate at all. I have a stock Monoprice", "using PLA, but I recently got a roll of PETG and it is", "This didn't present a problem when I was using PLA, but I recently", "tried any bed additions/changes to get better adhesion, since I know rafts stick", "characteristics of a first layer raft, in comparison to a first layer of", "I was using PLA, but I recently got a roll of PETG and", "trouble getting prints to stick directly on my bed, but had great reliability", "roll of PETG and it is very hard to remove rafts, so I", "ooze out of the nozzle and ride along with the print head, not", "prints to stick directly on my bed, but had great reliability when use" ]
[ "is because I want to save as much weight a possible as this", "why I don't want to print both the perimeters and the infill is", "the perimeters and the infill is because I want to save as much", "the infill is because I want to save as much weight a possible", "[![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can notice a gap between the perimeters. That gap is", "the other image. Basically I want a smooth infill that goes around the", "perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want the gap to be filled; but, I don't want it", "This is just a test slice. The wing model is not finished yet.", "I have this wing design that I want to print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can", "want to print both the perimeters and the infill is because I want", "the perimeters. The reason why I don't want to print both the perimeters", "it will be. Any ideas how I can slice this? The images are", "a possible as this is a wing of a model plane that must", "perimeter and 0% infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can notice a gap between the", "0% infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can notice a gap between the perimeters. That", "in the other image. Basically I want a smooth infill that goes around", "use Cura as well. This is just a test slice. The wing model", "and 0% infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can notice a gap between the perimeters.", "it to be smooth like the perimeters in the other image. Basically I", "I want to print it so that the perimeters are inside that thickness.", "much weight a possible as this is a wing of a model plane", "1.0 mm. I want to print it so that the perimeters are inside", "in the image. I want it to be smooth like the perimeters in", "to be smooth like the perimeters in the other image. Basically I want", "detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can notice a gap between the perimeters. That gap is what", "want a smooth infill that goes around the curves just like the perimeters.", "Any ideas how I can slice this? The images are screenshots in Slic3r,", "which is 1.0 mm. I want to print it so that the perimeters", "notice a gap between the perimeters. That gap is what I want filled", "I got this zig-zagged line: [![Zigzag filled gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want the", "thickness. Here is the wing sliced with 1 perimeter and 0% infill: [![wing", "print it so that the perimeters are inside that thickness. Here is the", "the perimeters. That gap is what I want filled and not the perimeters", "infill I got this zig-zagged line: [![Zigzag filled gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want", "around the curves just like the perimeters. The reason why I don't want", "the image. With 0 perimeters and 100% infill I got this zig-zagged line:", "perimeters and 100% infill I got this zig-zagged line: [![Zigzag filled gap between", "infill is because I want to save as much weight a possible as", "is the wing sliced with 1 perimeter and 0% infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You", "how I can slice this? The images are screenshots in Slic3r, but I", "perimeters. The reason why I don't want to print both the perimeters and", "have a thickness, which is 1.0 mm. I want to print it so", "perimeters in the other image. Basically I want a smooth infill that goes", "it is the more efficient it will be. Any ideas how I can", "curves just like the perimeters. The reason why I don't want to print", "this? The images are screenshots in Slic3r, but I can use Cura as", "save as much weight a possible as this is a wing of a", "that goes around the curves just like the perimeters. The reason why I", "image. With 0 perimeters and 100% infill I got this zig-zagged line: [![Zigzag", "can notice that its walls have a thickness, which is 1.0 mm. I", "is what I want filled and not the perimeters in the image. With", "I want filled and not the perimeters in the image. With 0 perimeters", "to save as much weight a possible as this is a wing of", "wing of a model plane that must fly, so the lighter it is", "and not the perimeters in the image. With 0 perimeters and 100% infill", "a wing of a model plane that must fly, so the lighter it", "lighter it is the more efficient it will be. Any ideas how I", "that its walls have a thickness, which is 1.0 mm. I want to", "it to be zig-zagged like in the image. I want it to be", "the perimeters in the other image. Basically I want a smooth infill that", "reason why I don't want to print both the perimeters and the infill", "is a wing of a model plane that must fly, so the lighter", "of a model plane that must fly, so the lighter it is the", "to be filled; but, I don't want it to be zig-zagged like in", "other image. Basically I want a smooth infill that goes around the curves", "the perimeters are inside that thickness. Here is the wing sliced with 1", "I can use Cura as well. This is just a test slice. The", "but I can use Cura as well. This is just a test slice.", "with 1 perimeter and 0% infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can notice a gap", "and 100% infill I got this zig-zagged line: [![Zigzag filled gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png)", "Cura as well. This is just a test slice. The wing model is", "I want it to be smooth like the perimeters in the other image.", "filled and not the perimeters in the image. With 0 perimeters and 100%", "to be zig-zagged like in the image. I want it to be smooth", "I don't want it to be zig-zagged like in the image. I want", "Here is the wing sliced with 1 perimeter and 0% infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png)", "be zig-zagged like in the image. I want it to be smooth like", "have this wing design that I want to print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can notice", "ideas how I can slice this? The images are screenshots in Slic3r, but", "well. This is just a test slice. The wing model is not finished", "fly, so the lighter it is the more efficient it will be. Any", "efficient it will be. Any ideas how I can slice this? The images", "can use Cura as well. This is just a test slice. The wing", "the lighter it is the more efficient it will be. Any ideas how", "gap between the perimeters. That gap is what I want filled and not", "got this zig-zagged line: [![Zigzag filled gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want the gap", "perimeters. That gap is what I want filled and not the perimeters in", "The reason why I don't want to print both the perimeters and the", "wing sliced with 1 perimeter and 0% infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can notice", "You can notice that its walls have a thickness, which is 1.0 mm.", "a thickness, which is 1.0 mm. I want to print it so that", "is 1.0 mm. I want to print it so that the perimeters are", "between the perimeters. That gap is what I want filled and not the", "both the perimeters and the infill is because I want to save as", "I want to print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can notice that its walls have a", "image. I want it to be smooth like the perimeters in the other", "goes around the curves just like the perimeters. The reason why I don't", "zig-zagged like in the image. I want it to be smooth like the", "image. Basically I want a smooth infill that goes around the curves just", "I want a smooth infill that goes around the curves just like the", "like the perimeters in the other image. Basically I want a smooth infill", "plane that must fly, so the lighter it is the more efficient it", "1 perimeter and 0% infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can notice a gap between", "like in the image. I want it to be smooth like the perimeters", "walls have a thickness, which is 1.0 mm. I want to print it", "its walls have a thickness, which is 1.0 mm. I want to print", "notice that its walls have a thickness, which is 1.0 mm. I want", "so that the perimeters are inside that thickness. Here is the wing sliced", "more efficient it will be. Any ideas how I can slice this? The", "are screenshots in Slic3r, but I can use Cura as well. This is", "infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can notice a gap between the perimeters. That gap", "gap is what I want filled and not the perimeters in the image.", "the wing sliced with 1 perimeter and 0% infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can", "a smooth infill that goes around the curves just like the perimeters. The", "print both the perimeters and the infill is because I want to save", "Basically I want a smooth infill that goes around the curves just like", "this zig-zagged line: [![Zigzag filled gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want the gap to", "the curves just like the perimeters. The reason why I don't want to", "must fly, so the lighter it is the more efficient it will be.", "be filled; but, I don't want it to be zig-zagged like in the", "images are screenshots in Slic3r, but I can use Cura as well. This", "You can notice a gap between the perimeters. That gap is what I", "the image. I want it to be smooth like the perimeters in the", "I can slice this? The images are screenshots in Slic3r, but I can", "screenshots in Slic3r, but I can use Cura as well. This is just", "slice this? The images are screenshots in Slic3r, but I can use Cura", "as well. This is just a test slice. The wing model is not", "perimeters are inside that thickness. Here is the wing sliced with 1 perimeter", "Slic3r, but I can use Cura as well. This is just a test", "want it to be smooth like the perimeters in the other image. Basically", "don't want it to be zig-zagged like in the image. I want it", "perimeters and the infill is because I want to save as much weight", "the more efficient it will be. Any ideas how I can slice this?", "model plane that must fly, so the lighter it is the more efficient", "as much weight a possible as this is a wing of a model", "weight a possible as this is a wing of a model plane that", "line: [![Zigzag filled gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want the gap to be filled;", "want to print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can notice that its walls have a thickness,", "the perimeters in the image. With 0 perimeters and 100% infill I got", "want filled and not the perimeters in the image. With 0 perimeters and", "to print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can notice that its walls have a thickness, which", "That gap is what I want filled and not the perimeters in the", "I don't want to print both the perimeters and the infill is because", "I want to save as much weight a possible as this is a", "can slice this? The images are screenshots in Slic3r, but I can use", "smooth infill that goes around the curves just like the perimeters. The reason", "are inside that thickness. Here is the wing sliced with 1 perimeter and", "0 perimeters and 100% infill I got this zig-zagged line: [![Zigzag filled gap", "want to print it so that the perimeters are inside that thickness. Here", "a model plane that must fly, so the lighter it is the more", "smooth like the perimeters in the other image. Basically I want a smooth", "this is a wing of a model plane that must fly, so the", "in the image. With 0 perimeters and 100% infill I got this zig-zagged", "[![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can notice that its walls have a thickness, which is 1.0", "inside that thickness. Here is the wing sliced with 1 perimeter and 0%", "is the more efficient it will be. Any ideas how I can slice", "that the perimeters are inside that thickness. Here is the wing sliced with", "be. Any ideas how I can slice this? The images are screenshots in", "filled gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want the gap to be filled; but, I", "that must fly, so the lighter it is the more efficient it will", "that I want to print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can notice that its walls have", "perimeters in the image. With 0 perimeters and 100% infill I got this", "infill that goes around the curves just like the perimeters. The reason why", "possible as this is a wing of a model plane that must fly,", "the gap to be filled; but, I don't want it to be zig-zagged", "sliced with 1 perimeter and 0% infill: [![wing detail](https://i.stack.imgur.com/MvFDx.png)](https://i.stack.imgur.com/MvFDx.png) You can notice a", "thickness, which is 1.0 mm. I want to print it so that the", "between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want the gap to be filled; but, I don't want", "in Slic3r, but I can use Cura as well. This is just a", "don't want to print both the perimeters and the infill is because I", "and the infill is because I want to save as much weight a", "what I want filled and not the perimeters in the image. With 0", "it so that the perimeters are inside that thickness. Here is the wing", "100% infill I got this zig-zagged line: [![Zigzag filled gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I", "zig-zagged line: [![Zigzag filled gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want the gap to be", "[![Zigzag filled gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want the gap to be filled; but,", "want to save as much weight a possible as this is a wing", "design that I want to print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can notice that its walls", "but, I don't want it to be zig-zagged like in the image. I", "be smooth like the perimeters in the other image. Basically I want a", "will be. Any ideas how I can slice this? The images are screenshots", "a gap between the perimeters. That gap is what I want filled and", "mm. I want to print it so that the perimeters are inside that", "not the perimeters in the image. With 0 perimeters and 100% infill I", "like the perimeters. The reason why I don't want to print both the", "because I want to save as much weight a possible as this is", "this wing design that I want to print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can notice that", "I want the gap to be filled; but, I don't want it to", "that thickness. Here is the wing sliced with 1 perimeter and 0% infill:", "want it to be zig-zagged like in the image. I want it to", "so the lighter it is the more efficient it will be. Any ideas", "just like the perimeters. The reason why I don't want to print both", "to print it so that the perimeters are inside that thickness. Here is", "With 0 perimeters and 100% infill I got this zig-zagged line: [![Zigzag filled", "wing design that I want to print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can notice that its", "The images are screenshots in Slic3r, but I can use Cura as well.", "as this is a wing of a model plane that must fly, so", "to print both the perimeters and the infill is because I want to", "want the gap to be filled; but, I don't want it to be", "filled; but, I don't want it to be zig-zagged like in the image.", "gap between perimeters](https://i.stack.imgur.com/U048S.png)](https://i.stack.imgur.com/U048S.png) I want the gap to be filled; but, I don't", "gap to be filled; but, I don't want it to be zig-zagged like", "can notice a gap between the perimeters. That gap is what I want", "print: [![wing](https://i.stack.imgur.com/EF87K.png)](https://i.stack.imgur.com/EF87K.png) You can notice that its walls have a thickness, which is" ]
[ "before switching on the printer. Does anyone know what the cause of this", "any obvious mechanical issues. I checked all guide and threaded rods were straight", "completes a print, the right hand Z mount ends up 1-2 mm lower", "know what the cause of this might be? I'm guessing something is causing", "of this might be? I'm guessing something is causing the right hand Z", "threaded rods were straight before assembly. Could it be a faulty stepper or", "left and right hand Z mounts of the X-axis are at the same", "height before switching on the printer. Does anyone know what the cause of", "or hear any obvious mechanical issues. I checked all guide and threaded rods", "right hand Z mount ends up 1-2 mm lower than the left, even", "than the left, even though I make sure both the left and right", "though I make sure both the left and right hand Z mounts of", "is causing the right hand Z to skip steps. I can't see or", "right hand Z mounts of the X-axis are at the same height before", "see or hear any obvious mechanical issues. I checked all guide and threaded", "mounts of the X-axis are at the same height before switching on the", "lower than the left, even though I make sure both the left and", "the left and right hand Z mounts of the X-axis are at the", "on the printer. Does anyone know what the cause of this might be?", "Z mounts of the X-axis are at the same height before switching on", "I can't see or hear any obvious mechanical issues. I checked all guide", "rods were straight before assembly. Could it be a faulty stepper or control", "mm lower than the left, even though I make sure both the left", "guessing something is causing the right hand Z to skip steps. I can't", "this might be? I'm guessing something is causing the right hand Z to", "and threaded rods were straight before assembly. Could it be a faulty stepper", "after my Anet A8 completes a print, the right hand Z mount ends", "same height before switching on the printer. Does anyone know what the cause", "X-axis are at the same height before switching on the printer. Does anyone", "can't see or hear any obvious mechanical issues. I checked all guide and", "steps. I can't see or hear any obvious mechanical issues. I checked all", "up 1-2 mm lower than the left, even though I make sure both", "1-2 mm lower than the left, even though I make sure both the", "Does anyone know what the cause of this might be? I'm guessing something", "hand Z mounts of the X-axis are at the same height before switching", "were straight before assembly. Could it be a faulty stepper or control electronics?", "the same height before switching on the printer. Does anyone know what the", "hand Z to skip steps. I can't see or hear any obvious mechanical", "A8 completes a print, the right hand Z mount ends up 1-2 mm", "switching on the printer. Does anyone know what the cause of this might", "are at the same height before switching on the printer. Does anyone know", "Z to skip steps. I can't see or hear any obvious mechanical issues.", "Z mount ends up 1-2 mm lower than the left, even though I", "guide and threaded rods were straight before assembly. Could it be a faulty", "cause of this might be? I'm guessing something is causing the right hand", "Anet A8 completes a print, the right hand Z mount ends up 1-2", "I'm guessing something is causing the right hand Z to skip steps. I", "might be? I'm guessing something is causing the right hand Z to skip", "issues. I checked all guide and threaded rods were straight before assembly. Could", "I've noticed that after my Anet A8 completes a print, the right hand", "the X-axis are at the same height before switching on the printer. Does", "even though I make sure both the left and right hand Z mounts", "mount ends up 1-2 mm lower than the left, even though I make", "obvious mechanical issues. I checked all guide and threaded rods were straight before", "my Anet A8 completes a print, the right hand Z mount ends up", "at the same height before switching on the printer. Does anyone know what", "to skip steps. I can't see or hear any obvious mechanical issues. I", "hear any obvious mechanical issues. I checked all guide and threaded rods were", "the printer. Does anyone know what the cause of this might be? I'm", "left, even though I make sure both the left and right hand Z", "the right hand Z mount ends up 1-2 mm lower than the left,", "what the cause of this might be? I'm guessing something is causing the", "I make sure both the left and right hand Z mounts of the", "print, the right hand Z mount ends up 1-2 mm lower than the", "skip steps. I can't see or hear any obvious mechanical issues. I checked", "something is causing the right hand Z to skip steps. I can't see", "mechanical issues. I checked all guide and threaded rods were straight before assembly.", "make sure both the left and right hand Z mounts of the X-axis", "and right hand Z mounts of the X-axis are at the same height", "noticed that after my Anet A8 completes a print, the right hand Z", "be? I'm guessing something is causing the right hand Z to skip steps.", "the right hand Z to skip steps. I can't see or hear any", "anyone know what the cause of this might be? I'm guessing something is", "sure both the left and right hand Z mounts of the X-axis are", "the left, even though I make sure both the left and right hand", "printer. Does anyone know what the cause of this might be? I'm guessing", "ends up 1-2 mm lower than the left, even though I make sure", "the cause of this might be? I'm guessing something is causing the right", "that after my Anet A8 completes a print, the right hand Z mount", "all guide and threaded rods were straight before assembly. Could it be a", "a print, the right hand Z mount ends up 1-2 mm lower than", "of the X-axis are at the same height before switching on the printer.", "both the left and right hand Z mounts of the X-axis are at", "hand Z mount ends up 1-2 mm lower than the left, even though", "causing the right hand Z to skip steps. I can't see or hear", "right hand Z to skip steps. I can't see or hear any obvious", "checked all guide and threaded rods were straight before assembly. Could it be", "I checked all guide and threaded rods were straight before assembly. Could it" ]
[ "for their research costs and initial machining set ups and this is reflected", "* Throat (with Teflon lining) * Heating block * Heatsink * Nozzle ", "some quite rigorous QA and testing of the build, and they have to", "to build a hotend, using separate parts, sourced on eBay, from China, and", "However, I wondered if I sourced the individual parts from China, for a", "nozzle, etc., then the filament will not extrude correctly. See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to", "Thermistor could I too, end up with a hotend, that performs as well", "I just want to know if anyone has first hand (positive or negative)", "wondered if I sourced the individual parts from China, for a dollar apiece,", "that most, if not, all of the parts used in a E3D hotend", "[tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How long is an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming that the", "probably come from China anyway, these days, as most production facilites have moved", "build a hotend, using separate parts, sourced on eBay, from China, and still", "times, in blogs, threads, etc., so I presume that it is not possible.", "and they have to pay for their research costs and initial machining set", "to the cheaper manufacturing bases and machining shops, in SE Asia. I have", "set ups and this is reflected in the high cost. Also, the expression,", "machined, and finished, correctly then there should not be a problem, right? Has", "used in a E3D hotend probably come from China anyway, these days, as", "this is reflected in the high cost. Also, the expression, you get what", "opinionated answers, in order to stay within SE rules - although opinions are", "realise that if the parts are not finished correctly, and end up with", "then the filament will not extrude correctly. See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How long", "budget. Now, obviously/presumably, there is some quite rigorous QA and testing of the", "that the prints were much improved. I have read this countless times, in", "SE rules - although opinions are always welcome - but I just want", "a E3D hotend probably come from China anyway, these days, as most production", "to know if anyone has first hand (positive or negative) experience of this.", "to a genuine E3D hotend. After that the prints were much improved. I", "presume that it is not possible. I realise that if the parts are", "not finished correctly, and end up with burring on the inside of the", "an E3D hotend, or am I living in cloud cuckoo land? After all,", "testing of the build, and they have to pay for their research costs", "quality print? --- In my opinion, the E3D V6 hotend is rather expensive,", "that the parts that I receive are machined, and finished, correctly then there", "that if the parts are not finished correctly, and end up with burring", "Also, the expression, you get what you pay for, springs to mind. However,", "building to a tight budget. Now, obviously/presumably, there is some quite rigorous QA", "a dollar apiece, that is to say the: * Throat (with Teflon lining)", "or even out performs, an E3D hotend, or am I living in cloud", "extrusion problems, shoddy prints, etc, from their cheap printer, until they finally shelled", "threads, etc., so I presume that it is not possible. I realise that", "not forget that most, if not, all of the parts used in a", "the inside of the throat, nozzle, etc., then the filament will not extrude", "Has anyone actually done this? Is tinkering with hotends a done thing? Does", "and/or tips? NOTE: This question is not really after opinionated answers, in order", "Does anyone have any good pointers and/or tips? NOTE: This question is not", "on eBay, from China, and still achieve a high quality print? --- In", "with a hotend, that performs as well as, or even out performs, an", "the expression, you get what you pay for, springs to mind. However, I", "days, as most production facilites have moved from the US/EU to the cheaper", "answers, in order to stay within SE rules - although opinions are always", "welcome - but I just want to know if anyone has first hand", "* Thermistor could I too, end up with a hotend, that performs as", "After all, let's not forget that most, if not, all of the parts", "if the parts are not finished correctly, and end up with burring on", "so I presume that it is not possible. I realise that if the", "they have to pay for their research costs and initial machining set ups", "countless times, in blogs, threads, etc., so I presume that it is not", "from China anyway, these days, as most production facilites have moved from the", "I have read so many times that people were experiencing extrusion problems, shoddy", "rigorous QA and testing of the build, and they have to pay for", "their cheap printer, until they finally shelled out the cash and upgraded to", "and this is reflected in the high cost. Also, the expression, you get", "well as, or even out performs, an E3D hotend, or am I living", "are machined, and finished, correctly then there should not be a problem, right?", "order to stay within SE rules - although opinions are always welcome -", "within SE rules - although opinions are always welcome - but I just", "a hotend, using separate parts, sourced on eBay, from China, and still achieve", "my opinion, the E3D V6 hotend is rather expensive, at $/£70, especially to", "initial machining set ups and this is reflected in the high cost. Also,", "the: Throat (with Teflon lining) * Heating block * Heatsink * Nozzle", "from the US/EU to the cheaper manufacturing bases and machining shops, in SE", "not really after opinionated answers, in order to stay within SE rules -", "hotend. After that the prints were much improved. I have read this countless", "and machining shops, in SE Asia. I have read so many times that", "from China, for a dollar apiece, that is to say the: * Throat", "opinions are always welcome - but I just want to know if anyone", "Throat (with Teflon lining) * Heating block * Heatsink * Nozzle * Pneumatic", "is to say the: * Throat (with Teflon lining) * Heating block ", "always welcome - but I just want to know if anyone has first", "correctly then there should not be a problem, right? Has anyone actually done", "Pneumatic connector (PC4-05/PC4-M06) Heater * Thermistor could I too, end up with", "all of the parts used in a E3D hotend probably come from China", "achieve a high quality print? --- In my opinion, the E3D V6 hotend", "[How long is an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming that the parts that I", "right? Has anyone actually done this? Is tinkering with hotends a done thing?", "forget that most, if not, all of the parts used in a E3D", "is not really after opinionated answers, in order to stay within SE rules", "high cost. Also, the expression, you get what you pay for, springs to", "* Pneumatic connector (PC4-05/PC4-M06) * Heater * Thermistor could I too, end up", "this? Is tinkering with hotends a done thing? Does anyone have any good", "to a tight budget. Now, obviously/presumably, there is some quite rigorous QA and", "problems, shoddy prints, etc, from their cheap printer, until they finally shelled out", "E3D hotend. After that the prints were much improved. I have read this", "if I sourced the individual parts from China, for a dollar apiece, that", "they finally shelled out the cash and upgraded to a genuine E3D hotend.", "E3D V6 hotend is rather expensive, at $/£70, especially to those building to", "I too, end up with a hotend, that performs as well as, or", "say the: * Throat (with Teflon lining) * Heating block * Heatsink ", "most production facilites have moved from the US/EU to the cheaper manufacturing bases", "prints were much improved. I have read this countless* times, in blogs, threads,", "possible to build a hotend, using separate parts, sourced on eBay, from China,", "inside of the throat, nozzle, etc., then the filament will not extrude correctly.", "I living in cloud cuckoo land? After all, let's not forget that most,", "were much improved. I have read this countless times, in blogs, threads, etc.,", "of the build, and they have to pay for their research costs and", "V6 hotend is rather expensive, at $/£70, especially to those building to a", "I wondered if I sourced the individual parts from China, for a dollar", "not extrude correctly. See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How long is an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/)", "individual parts from China, for a dollar apiece, that is to say the:", "hotend is rather expensive, at $/£70, especially to those building to a tight", "on the inside of the throat, nozzle, etc., then the filament will not", "the US/EU to the cheaper manufacturing bases and machining shops, in SE Asia.", "hotend, or am I living in cloud cuckoo land? After all, let's not", "pay for, springs to mind. However, I wondered if I sourced the individual", "performs, an E3D hotend, or am I living in cloud cuckoo land? After", "were experiencing extrusion problems, shoddy prints, etc, from their cheap printer, until they", "stay within SE rules - although opinions are always welcome - but I", "Heater Thermistor could I too, end up with a hotend, that performs", "out performs, an E3D hotend, or am I living in cloud cuckoo land?", "of the throat, nozzle, etc., then the filament will not extrude correctly. See", "cuckoo land? After all, let's not forget that most, if not, all of", "people were experiencing extrusion problems, shoddy prints, etc, from their cheap printer, until", "anyone actually done this? Is tinkering with hotends a done thing? Does anyone", "obviously/presumably, there is some quite rigorous QA and testing of the build, and", "production facilites have moved from the US/EU to the cheaper manufacturing bases and", "separate parts, sourced on eBay, from China, and still achieve a high quality", "- although opinions are always welcome - but I just want to know", "a tight budget. Now, obviously/presumably, there is some quite rigorous QA and testing", "parts from China, for a dollar apiece, that is to say the: ", "Now, obviously/presumably, there is some quite rigorous QA and testing of the build,", "burring on the inside of the throat, nozzle, etc., then the filament will", "you pay for, springs to mind. However, I wondered if I sourced the", "shoddy prints, etc, from their cheap printer, until they finally shelled out the", "Nozzle * Pneumatic connector (PC4-05/PC4-M06) * Heater * Thermistor could I too, end", "that it is not possible. I realise that if the parts are not", "* Nozzle * Pneumatic connector (PC4-05/PC4-M06) * Heater * Thermistor could I too,", "genuine E3D hotend. After that the prints were much improved. I have read", "come from China anyway, these days, as most production facilites have moved from", "to mind. However, I wondered if I sourced the individual parts from China,", "the throat, nozzle, etc., then the filament will not extrude correctly. See [tbm0115's", "opinion, the E3D V6 hotend is rather expensive, at $/£70, especially to those", "and testing of the build, and they have to pay for their research", "a genuine E3D hotend. After that the prints were much improved. I have", "end up with burring on the inside of the throat, nozzle, etc., then", "facilites have moved from the US/EU to the cheaper manufacturing bases and machining", "that I receive are machined, and finished, correctly then there should not be", "in the high cost. Also, the expression, you get what you pay for,", "after opinionated answers, in order to stay within SE rules - although opinions", "are not finished correctly, and end up with burring on the inside of", "you get what you pay for, springs to mind. However, I wondered if", "I sourced the individual parts from China, for a dollar apiece, that is", "done this? Is tinkering with hotends a done thing? Does anyone have any", "E3D hotend probably come from China anyway, these days, as most production facilites", "anyone have any good pointers and/or tips? NOTE: This question is not really", "Heating block * Heatsink * Nozzle * Pneumatic connector (PC4-05/PC4-M06) * Heater ", "the build, and they have to pay for their research costs and initial", "end up with a hotend, that performs as well as, or even out", "up with a hotend, that performs as well as, or even out performs,", "possible. I realise that if the parts are not finished correctly, and end", "etc., then the filament will not extrude correctly. See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How", "with hotends a done thing? Does anyone have any good pointers and/or tips?", "extrude correctly. See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How long is an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However,", "or am I living in cloud cuckoo land? After all, let's not forget", "I realise that if the parts are not finished correctly, and end up", "mind. However, I wondered if I sourced the individual parts from China, for", "etc., so I presume that it is not possible. I realise that if", "parts, sourced on eBay, from China, and still achieve a high quality print?", "up with burring on the inside of the throat, nozzle, etc., then the", "and finished, correctly then there should not be a problem, right? Has anyone", "with burring on the inside of the throat, nozzle, etc., then the filament", "the cash and upgraded to a genuine E3D hotend. After that the prints", "get what you pay for, springs to mind. However, I wondered if I", "are always welcome - but I just want to know if anyone has", "parts that I receive are machined, and finished, correctly then there should not", "I have read this countless times, in blogs, threads, etc., so I presume", "$/£70, especially to those building to a tight budget. Now, obviously/presumably, there is", "those building to a tight budget. Now, obviously/presumably, there is some quite rigorous", "tight budget. Now, obviously/presumably, there is some quite rigorous QA and testing of", "at $/£70, especially to those building to a tight budget. Now, obviously/presumably, there", "problem, right? Has anyone actually done this? Is tinkering with hotends a done", "(PC4-05/PC4-M06) * Heater * Thermistor could I too, end up with a hotend,", "hotend probably come from China anyway, these days, as most production facilites have", "costs and initial machining set ups and this is reflected in the high", "read this countless times, in blogs, threads, etc., so I presume that it", "However, assuming that the parts that I receive are machined, and finished, correctly", "filament will not extrude correctly. See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How long is an", "especially to those building to a tight budget. Now, obviously/presumably, there is some", "- but I just want to know if anyone has first hand (positive", "really after opinionated answers, in order to stay within SE rules - although", "and initial machining set ups and this is reflected in the high cost.", "to say the: * Throat (with Teflon lining) * Heating block * Heatsink", "hotend, that performs as well as, or even out performs, an E3D hotend,", "am I living in cloud cuckoo land? After all, let's not forget that", "much improved. I have read this countless times, in blogs, threads, etc., so", "question is not really after opinionated answers, in order to stay within SE", "a done thing? Does anyone have any good pointers and/or tips? NOTE: This", "until they finally shelled out the cash and upgraded to a genuine E3D", "This question is not really after opinionated answers, in order to stay within", "as well as, or even out performs, an E3D hotend, or am I", "shops, in SE Asia. I have read so many times that people were", "finished, correctly then there should not be a problem, right? Has anyone actually", "I presume that it is not possible. I realise that if the parts", "expression, you get what you pay for, springs to mind. However, I wondered", "extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming that the parts that I receive are machined, and", "it possible to build a hotend, using separate parts, sourced on eBay, from", "(with Teflon lining) * Heating block * Heatsink * Nozzle * Pneumatic connector", "to pay for their research costs and initial machining set ups and this", "the parts used in a E3D hotend probably come from China anyway, these", "NOTE: This question is not really after opinionated answers, in order to stay", "pay for their research costs and initial machining set ups and this is", "Is tinkering with hotends a done thing? Does anyone have any good pointers", "cloud cuckoo land? After all, let's not forget that most, if not, all", "in order to stay within SE rules - although opinions are always welcome", "sourced the individual parts from China, for a dollar apiece, that is to", "from their cheap printer, until they finally shelled out the cash and upgraded", "throat, nozzle, etc., then the filament will not extrude correctly. See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988)", "finished correctly, and end up with burring on the inside of the throat,", "lining) * Heating block * Heatsink * Nozzle * Pneumatic connector (PC4-05/PC4-M06) ", "what you pay for, springs to mind. However, I wondered if I sourced", "ups and this is reflected in the high cost. Also, the expression, you", "many times that people were experiencing extrusion problems, shoddy prints, etc, from their", "read so many times that people were experiencing extrusion problems, shoddy prints, etc,", "for a dollar apiece, that is to say the: * Throat (with Teflon", "machining shops, in SE Asia. I have read so many times that people", "have read this countless times, in blogs, threads, etc., so I presume that", "correctly. See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How long is an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming", "shelled out the cash and upgraded to a genuine E3D hotend. After that", "China, for a dollar apiece, that is to say the: * Throat (with", "the individual parts from China, for a dollar apiece, that is to say", "eBay, from China, and still achieve a high quality print? --- In my", "parts used in a E3D hotend probably come from China anyway, these days,", "the cheaper manufacturing bases and machining shops, in SE Asia. I have read", "a high quality print? --- In my opinion, the E3D V6 hotend is", "assuming that the parts that I receive are machined, and finished, correctly then", "not, all of the parts used in a E3D hotend probably come from", "I receive are machined, and finished, correctly then there should not be a", "parts are not finished correctly, and end up with burring on the inside", "moved from the US/EU to the cheaper manufacturing bases and machining shops, in", "upgraded to a genuine E3D hotend. After that the prints were much improved.", "machining set ups and this is reflected in the high cost. Also, the", "in SE Asia. I have read so many times that people were experiencing", "that is to say the: * Throat (with Teflon lining) * Heating block", "the filament will not extrude correctly. See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How long is", "be a problem, right? Has anyone actually done this? Is tinkering with hotends", "print? --- In my opinion, the E3D V6 hotend is rather expensive, at", "from China, and still achieve a high quality print? --- In my opinion,", "Is it possible to build a hotend, using separate parts, sourced on eBay,", "US/EU to the cheaper manufacturing bases and machining shops, in SE Asia. I", "sourced on eBay, from China, and still achieve a high quality print? ---", "high quality print? --- In my opinion, the E3D V6 hotend is rather", "dollar apiece, that is to say the: * Throat (with Teflon lining) ", "### TL;DR Is it possible to build a hotend, using separate parts, sourced", "is rather expensive, at $/£70, especially to those building to a tight budget.", "answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How long is an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming that the parts", "still achieve a high quality print? --- In my opinion, the E3D V6", " Heatsink * Nozzle * Pneumatic connector (PC4-05/PC4-M06) * Heater * Thermistor could", "QA and testing of the build, and they have to pay for their", "times* that people were experiencing extrusion problems, shoddy prints, etc, from their cheap", "good pointers and/or tips? NOTE: This question is not really after opinionated answers,", "for, springs to mind. However, I wondered if I sourced the individual parts", "In my opinion, the E3D V6 hotend is rather expensive, at $/£70, especially", "performs as well as, or even out performs, an E3D hotend, or am", "and end up with burring on the inside of the throat, nozzle, etc.,", "prints, etc, from their cheap printer, until they finally shelled out the cash", "printer, until they finally shelled out the cash and upgraded to a genuine", "expensive, at $/£70, especially to those building to a tight budget. Now, obviously/presumably,", "SE Asia. I have read so many times* that people were experiencing extrusion", "cost. Also, the expression, you get what you pay for, springs to mind.", "in blogs, threads, etc., so I presume that it is not possible. I", "have read so many times that people were experiencing extrusion problems, shoddy prints,", "to those building to a tight budget. Now, obviously/presumably, there is some quite", "land? After all, let's not forget that most, if not, all of the", "the E3D V6 hotend is rather expensive, at $/£70, especially to those building", "there is some quite rigorous QA and testing of the build, and they", "most, if not, all of the parts used in a E3D hotend probably", "etc, from their cheap printer, until they finally shelled out the cash and", "even out performs, an E3D hotend, or am I living in cloud cuckoo", "out the cash and upgraded to a genuine E3D hotend. After that the", "the high cost. Also, the expression, you get what you pay for, springs", "is reflected in the high cost. Also, the expression, you get what you", "to [How long is an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming that the parts that", "any good pointers and/or tips? NOTE: This question is not really after opinionated", " Heater * Thermistor could I too, end up with a hotend, that", "their research costs and initial machining set ups and this is reflected in", "China, and still achieve a high quality print? --- In my opinion, the", "experiencing extrusion problems, shoddy prints, etc, from their cheap printer, until they finally", "finally shelled out the cash and upgraded to a genuine E3D hotend. After", "using separate parts, sourced on eBay, from China, and still achieve a high", "let's not forget that most, if not, all of the parts used in", "cheap printer, until they finally shelled out the cash and upgraded to a", "bases and machining shops, in SE Asia. I have read so many times", "just want to know if anyone has first hand (positive or negative) experience", "connector (PC4-05/PC4-M06) * Heater * Thermistor could I too, end up with a", "receive are machined, and finished, correctly then there should not be a problem,", "should not be a problem, right? Has anyone actually done this? Is tinkering", "too, end up with a hotend, that performs as well as, or even", "pointers and/or tips? NOTE: This question is not really after opinionated answers, in", "it is not possible. I realise that if the parts are not finished", "Heatsink * Nozzle * Pneumatic connector (PC4-05/PC4-M06) * Heater * Thermistor could I", "block * Heatsink * Nozzle * Pneumatic connector (PC4-05/PC4-M06) * Heater * Thermistor", "cheaper manufacturing bases and machining shops, in SE Asia. I have read so", "not possible. I realise that if the parts are not finished correctly, and", "and upgraded to a genuine E3D hotend. After that the prints were much", " Heating block * Heatsink * Nozzle * Pneumatic connector (PC4-05/PC4-M06) * Heater", "quite rigorous QA and testing of the build, and they have to pay", "as, or even out performs, an E3D hotend, or am I living in", "blogs, threads, etc., so I presume that it is not possible. I realise", "manufacturing bases and machining shops, in SE Asia. I have read so many", "but I just want to know if anyone has first hand (positive or", "rules - although opinions are always welcome - but I just want to", "then there should not be a problem, right? Has anyone actually done this?", "there should not be a problem, right? Has anyone actually done this? Is", "After that the prints were much improved. I have read this countless* times,", "--- In my opinion, the E3D V6 hotend is rather expensive, at $/£70,", "Asia. I have read so many times that people were experiencing extrusion problems,", "actually done this? Is tinkering with hotends a done thing? Does anyone have", "improved. I have read this countless times, in blogs, threads, etc., so I", "could I too, end up with a hotend, that performs as well as,", "done thing? Does anyone have any good pointers and/or tips? NOTE: This question", "rather expensive, at $/£70, especially to those building to a tight budget. Now,", "apiece, that is to say the: * Throat (with Teflon lining) * Heating", "anyway, these days, as most production facilites have moved from the US/EU to", "TL;DR Is it possible to build a hotend, using separate parts, sourced on", "as most production facilites have moved from the US/EU to the cheaper manufacturing", "the parts that I receive are machined, and finished, correctly then there should", "so many times that people were experiencing extrusion problems, shoddy prints, etc, from", "China anyway, these days, as most production facilites have moved from the US/EU", "E3D hotend, or am I living in cloud cuckoo land? After all, let's", "if not, all of the parts used in a E3D hotend probably come", "hotends a done thing? Does anyone have any good pointers and/or tips? NOTE:", "although opinions are always welcome - but I just want to know if", "these days, as most production facilites have moved from the US/EU to the", "not be a problem, right? Has anyone actually done this? Is tinkering with", "long is an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming that the parts that I receive", "of the parts used in a E3D hotend probably come from China anyway,", "have any good pointers and/or tips? NOTE: This question is not really after", "build, and they have to pay for their research costs and initial machining", "the prints were much improved. I have read this countless times, in blogs,", "and still achieve a high quality print? --- In my opinion, the E3D", "hotend, using separate parts, sourced on eBay, from China, and still achieve a", "that performs as well as, or even out performs, an E3D hotend, or", "tips? NOTE: This question is not really after opinionated answers, in order to", "a problem, right? Has anyone actually done this? Is tinkering with hotends a", "to stay within SE rules - although opinions are always welcome - but", "reflected in the high cost. Also, the expression, you get what you pay", "in a E3D hotend probably come from China anyway, these days, as most", "See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How long is an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming that", "is some quite rigorous QA and testing of the build, and they have", "will not extrude correctly. See [tbm0115's answer](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/3988#3988) to [How long is an extruder's/nozzle's", "a hotend, that performs as well as, or even out performs, an E3D", "the parts are not finished correctly, and end up with burring on the", "correctly, and end up with burring on the inside of the throat, nozzle,", "want to know if anyone has first hand (positive or negative) experience of", "is an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming that the parts that I receive are", "that people were experiencing extrusion problems, shoddy prints, etc, from their cheap printer,", "Teflon lining) Heating block * Heatsink * Nozzle * Pneumatic connector (PC4-05/PC4-M06)", "springs to mind. However, I wondered if I sourced the individual parts from", "an extruder's/nozzle's life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming that the parts that I receive are machined,", "thing? Does anyone have any good pointers and/or tips? NOTE: This question is", "living in cloud cuckoo land? After all, let's not forget that most, if", "is not possible. I realise that if the parts are not finished correctly,", "research costs and initial machining set ups and this is reflected in the", "life?](https://3dprinting.stackexchange.com/questions/3985/how-long-is-an-extruders-nozzles-life/) However, assuming that the parts that I receive are machined, and finished,", "all, let's not forget that most, if not, all of the parts used", "have to pay for their research costs and initial machining set ups and", "tinkering with hotends a done thing? Does anyone have any good pointers and/or", "cash and upgraded to a genuine E3D hotend. After that the prints were", "this countless times, in blogs, threads, etc., so I presume that it is", "in cloud cuckoo land? After all, let's not forget that most, if not,", "have moved from the US/EU to the cheaper manufacturing bases and machining shops," ]
[ "if you'd like. // // For Z_PROBE_ALLEN_KEY see the Delta example configurations. //", "these settings to specify the distance (mm) to raise the probe (or ", "//#define Z_MIN_PROBE_PIN Z_MAX_PIN /* * Probe Type * * Allen Key Probes, Servo", "source of the 'noise' (the change * in current flowing through the wires).", "But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to", "For all extruders #define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled.", "DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y,", "of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with", "other boards you may need to define FIL_RUNOUT_PIN. * By default the firmware", "use internal pullup for filament runout pins if the sensor is defined. #define", "Z Servo Probe, such as an endstop switch on a rotating arm. /", "up. Any advice? I've definitely done a few searches but haven't solved the", "haven't solved the problem. `Config.h` is as follows (clipped due to posting restrictions):", "undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define", "/* * With this option each E stepper can have its own factors", "// @section machine // Invert the stepper direction. Change (or reverse the motor", "* Override with M201 * X, Y, Z, E0 [, E1[, E2[, E3[,", "to rotate. * Inductive probes need space to keep from triggering early. ", "software and they also only go up. Any advice? I've definitely done a", "Mechanical endstop with COM to ground and NC to Signal uses \"false\" here", "1:'High' } #define X_ENABLE_ON 0 #define Y_ENABLE_ON 0 #define Z_ENABLE_ON 0 #define E_ENABLE_ON", " * WARNING: Setting the wrong pin may have unexpected and potentially ", "(Active Low) use 0, Non Inverting (Active High) use 1 // :{ 0:'Low',", "of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the", "Y, Z, E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_AXIS_STEPS_PER_UNIT { 100,", "* M204 P Acceleration * M204 R Retract Acceleration * M204 T Travel", "X axis must travel to pickup the sled. 0 should be fine but", "do your homework. * / //#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN Z_MAX_PIN /* * Probe", "with caution and do your homework. * / //#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN Z_MAX_PIN", "3, 25 } /* * Default Max Acceleration (change/s) change = mm/s ", "probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE", "than the value set here, it may happen instantaneously. / #define DEFAULT_XJERK", "those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra", "of the line) to disable the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine", "Rate (mm/s) Override with M203 * X, Y, Z, E0 [, E1[,", "run into a problem with the Z-axis motors. Specifically, the Z-axis will move", "non-endstop and non-probe purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define", "the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to", "(0,0) / #define X_PROBE_OFFSET_FROM_EXTRUDER 22 // X offset: -left +right [of the nozzle]", "only make a quick noise if I try to move it up. `M119`", "Y offsets are both positive: #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10", "A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define", "between * probe points to avoid hitting the bed and other hardware. ", "change = mm/s Override with M204 * * M204 P Acceleration ", " \| (-) \| T * \| \| * O-- FRONT --+ ", "false #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false", "option for Toshiba stepper drivers //#define CONFIG_STEPPERS_TOSHIBA // @section extruder // For direct", "servo. / //#define BLTOUCH #if ENABLED(BLTOUCH) //#define BLTOUCH_DELAY 375 // (ms) Enable and", "#define X_MAX_POS 230 #define Y_MAX_POS 200 #define Z_MAX_POS 200 // If enabled, axes", "drivers //#define CONFIG_STEPPERS_TOSHIBA // @section extruder // For direct drive extruder v9 set", "of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR", "logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to true to invert", "//#define DISABLE_REDUCED_ACCURACY_WARNING // @section extruder #define DISABLE_E false // For all extruders #define", "#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] // X and", "* * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32", "/** * Default Acceleration (change/s) change = mm/s * Override with M204 ", "the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false", "the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting", "Probes, FIX_MOUNTED_PROBE, etc. You must activate one of these to use Auto", "it will only make a quick noise if I try to move it", "probes #define XY_PROBE_SPEED 8000 // Speed for the first approach when double-probing (with", "triggering early. * * Use these settings to specify the distance (mm) to", "Turn heaters off when probing //#define PROBING_FANS_OFF // Turn fans off when probing", "Probe\" provides a means to do \"Auto\" Bed Leveling without a probe. ", "help those with inductive or other probe types. / //#define PROBING_HEATERS_OFF // Turn", "(mm/m) between probes #define XY_PROBE_SPEED 8000 // Speed for the first approach when", "For direct drive extruder v9 set to true, for geared extruder set to", "=========================== //=========================================================================== // @section homing // Specify here all the endstop connectors that", "push it further if you'd like. // // For Z_PROBE_ALLEN_KEY see the Delta", "//#define Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting Stepper Enable Pins (Active Low) use 0, Non", "E4]]]] / #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 4000, 120 } /* * Default", "hardware. * Servo-mounted probes require extra space for the arm to rotate. ", "#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /* * Z_MIN_PROBE_ENDSTOP * * Enable this option for a probe", "Enable this option for a probe connected to any pin except Z-Min. ", "Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. You must activate", "Probe, such as an endstop switch on a rotating arm. / //#define Z_ENDSTOP_SERVO_NR", "M502 * Note that if EEPROM is enabled, saved values will override", "= has filament, LOW = ran out / //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define", "normally-open switches to 5V and D32. * WARNING: Setting the wrong pin", "approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Speed for the \"accurate\"", "and they also only go up. Any advice? I've definitely done a few", "#define DISABLE_E false // For all extruders #define DISABLE_INACTIVE_EXTRUDER true // Keep only", "Y_MAX_POS 200 #define Z_MAX_POS 200 // If enabled, axes won't move below MIN_POS", "definitely done a few searches but haven't solved the problem. `Config.h` is as", "* In the following example the X and Y offsets are both positive:", "3000, 3000, 100, 10000 } /** * Default Acceleration (change/s) change = mm/s", "below. / /* * The \"Manual Probe\" provides a means to do \"Auto\"", "with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. * Only integer values >= 1 are", "to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to", "extruder #define DISABLE_E false // For all extruders #define DISABLE_INACTIVE_EXTRUDER true // Keep", "wrong pin may have unexpected and potentially * disastrous consequences. Use with caution", "integer values >= 1 are valid here. * * Example: `M851 Z-5` with", "BLTouch probe uses a Hall effect sensor and emulates a servo. / //#define", "/ #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing", "DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is", "between probes #define XY_PROBE_SPEED 8000 // Speed for the first approach when double-probing", "commands. //#define MAX_SOFTWARE_ENDSTOPS /** * Filament Runout Sensor * A mechanical or opto", "Y_ENABLE_ON 0 #define Z_ENABLE_ON 0 #define E_ENABLE_ON 0 // For all extruders //", "clearance above the bed, clamps, ... // Be sure you have this distance", "move it up. `M119` shows all endstops open. Min software stops are currently", "values set here apply over and above any (negative) * probe Z Offset", "also help those with inductive or other probe types. / //#define PROBING_HEATERS_OFF //", "//#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // coarse Endstop Settings //#define ENDSTOPPULLUPS //", "#if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS", "all endstops open. Min software stops are currently disabled, as I try to", "/* * Default Jerk (mm/s) * Override with M205 X Y Z E", "Enable this option for a probe connected to the Z Min endstop pin.", "to use internal pullup for filament runout pins if the sensor is defined.", "raise the probe (or * lower the bed). The values set here apply", "for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false #define", "ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the", "* The BLTouch probe uses a Hall effect sensor and emulates a servo.", "options selected below - will be disabled during probing so as to minimize", "9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of", "Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector. //#define Z_SERVO_ANGLES {70,0} // Z", "to true to invert the logic of the sensor. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment", "set here, it may happen instantaneously. / #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0", "probing seems unreliable. Heaters and/or fans - consistent with the options selected", "and/or fans - consistent with the * options selected below - will be", "needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) /", "are currently disabled, as I try to set the printer up. Using Marlin", "down (and trigger the endstop) but it will only make a quick noise", "be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define", "Retract Acceleration M204 T Travel Acceleration / #define DEFAULT_ACCELERATION 3000 // X,", "to GND and D32. - normally-open switches to 5V and D32. ", " Default Max Feed Rate (mm/s) * Override with M203 * X, Y,", "false // @section homing //#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height", "for probing //#define PROBE_DOUBLE_TOUCH /** * Z probes require clearance when deploying, stowing,", "number of extruders, the last value applies to the rest. / //#define DISTINCT_E_FACTORS", "E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for", "up. Using Marlin 1.1.3 with a RAMPS 1.4. Both motors turn and I've", "// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z", "//=========================================================================== // @section homing // Specify here all the endstop connectors that are", "Max Acceleration (change/s) change = mm/s (Maximum start speed for accelerated moves)", "and NC to Signal uses \"false\" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true", "#define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy", "* (0,0) / #define X_PROBE_OFFSET_FROM_EXTRUDER 22 // X offset: -left +right [of the", "set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true", "to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true //", "/ //#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs", "moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 //", "logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert", "requires acceleration. * When changing speed and direction, if the difference is less", "interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //============================== Movement Settings ============================", "a free endstop connector. * - Use 5V for powered (usually inductive) sensors.", "but it will only make a quick noise if I try to move", "For simple switches connect... * - normally-closed switches to GND and D32. ", "To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * -", "#define FIX_MOUNTED_PROBE /** * Z Servo Probe, such as an endstop switch on", "``` //=========================================================================== //============================== Endstop Settings =========================== //=========================================================================== // @section homing // Specify here", "E4]]]] / #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } /* * Default", "the 'noise' (the change * in current flowing through the wires). This is", "// X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000", "for Toshiba stepper drivers //#define CONFIG_STEPPERS_TOSHIBA // @section extruder // For direct drive", "* * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from", "for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION", "22 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12 //", "value set here, it may happen instantaneously. / #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK", ":[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR -1 #define Z_HOME_DIR -1 // @section machine", "selected below - will be disabled during probing so as to minimize ", "Comment this out (using // at the start of the line) to disable", "set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true", "@section motion /** * Default Settings * * These settings can be reset", "total number of extruders, the last value applies to the rest. / //#define", "INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false // @section homing //#define Z_HOMING_HEIGHT", "FIX_MOUNTED_PROBE /* * Z Servo Probe, such as an endstop switch on a", "probe connected to the Z Min endstop pin. / #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /* ", "like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The", "#define XY_PROBE_SPEED 8000 // Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)", "limits after homing (units are in mm) #define X_MIN_POS 0 #define Y_MIN_POS 0", "probe. Use G29 repeatedly, adjusting the Z height at each point with", "/ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } /* * Default Acceleration", "moves /** * Default Jerk (mm/s) * Override with M205 X Y Z", "true to invert the logic of the probe. // Enable this feature if", "Probe Type * * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.", "connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG #define", "\| \| * L \| (+) P \| R <-- probe (20,20) ", "// Turn heaters off when probing //#define PROBING_FANS_OFF // Turn fans off when", "filament, LOW = ran out / //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false", "Use G29 repeatedly, adjusting the Z height at each point with movement commands", "after homing (units are in mm) #define X_MIN_POS 0 #define Y_MIN_POS 0 #define", "Sensor * A mechanical or opto endstop is used to check for the", "ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with COM", "is a chance of losing position accuracy! #define DISABLE_X false #define DISABLE_Y false", "travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 // Speed for the first", "quick noise if I try to move it up. `M119` shows all endstops", "to Signal uses \"false\" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set", "with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE // A sled-mounted probe like those", "//============================= Z Probe Options ============================= //=========================================================================== // @section probes // // See http://marlinfw.org/configuration/probes.html", "probing //#define PROBE_DOUBLE_TOUCH /** * Z probes require clearance when deploying, stowing, and", "ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop", "and potentially * disastrous consequences. Use with caution and do your homework. ", "E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }", "values >= 1 are valid here. * * Example: `M851 Z-5` with a", "to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting Stepper Enable Pins (Active", "endstop pins are interrupt-capable. // This will remove the need to poll the", "offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test", "* M204 T Travel Acceleration / #define DEFAULT_ACCELERATION 3000 // X, Y, Z", "INVERT_Y_DIR false #define INVERT_Z_DIR false // Enable this option for Toshiba stepper drivers", "Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below", "extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR", "with the Z-axis motors. Specifically, the Z-axis will move down (and trigger the", " probe points to avoid hitting the bed and other hardware. * Servo-mounted", "have run into a problem with the Z-axis motors. Specifically, the Z-axis will", "Enable this option for Toshiba stepper drivers //#define CONFIG_STEPPERS_TOSHIBA // @section extruder //", "Inverting (Active High) use 1 // :{ 0:'Low', 1:'High' } #define X_ENABLE_ON 0", "such as an endstop switch on a rotating arm. / //#define Z_ENDSTOP_SERVO_NR 0", "a quick noise if I try to move it up. `M119` shows all", "//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed #endif /* ", "offset, relative to (0, 0). X and Y offsets must be integers.", "speed for accelerated moves) * Override with M201 * X, Y, Z, E0", "// A sled-mounted probe like those designed by Charles Bell. //#define Z_PROBE_SLED //#define", "\| \| * O-- FRONT --+ * (0,0) / #define X_PROBE_OFFSET_FROM_EXTRUDER 22 //", "do \"Auto\" Bed Leveling without a probe. Use G29 repeatedly, adjusting the", "purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG", "Default Settings * * These settings can be reset by M502 * ", "the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic", "to do \"Auto\" Bed Leveling without a probe. Use G29 repeatedly, adjusting", "each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // Use double touch for probing", "Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST // For", "the probe. // Enable this feature if all enabled endstop pins are interrupt-capable.", "your Z_MAX_POS in case. // Direction of endstops when homing; 1=MAX, -1=MIN //", "for a probe connected to any pin except Z-Min. * (By default Marlin", "(10,10) * T \| \| H * \| (-) \| T * \|", "// set to true to invert the logic of the probe. // Enable", "out (using // at the start of the line) to disable the endstop", "* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed", "touch for probing //#define PROBE_DOUBLE_TOUCH /** * Z probes require clearance when deploying,", "* * In the following example the X and Y offsets are both", "be reset by M502 * * Note that if EEPROM is enabled, saved", "100, 4000, 120 } /** * Default Max Feed Rate (mm/s) * Override", "// set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING", "endstop pin. / #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /* * Z_MIN_PROBE_ENDSTOP * * Enable this option", "true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set", "extruders #define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. // @section", "G29 repeatedly, adjusting the Z height at each point with movement commands ", "1 are valid here. * Example: `M851 Z-5` with a CLEARANCE of", "MIN_POS in response to movement commands. //#define MIN_SOFTWARE_ENDSTOPS // If enabled, axes won't", "relative to (0, 0). * X and Y offsets must be integers. ", "of the sensor. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament", "Acceleration M204 R Retract Acceleration * M204 T Travel Acceleration / #define", "Bed Leveling without a probe. Use G29 repeatedly, adjusting the Z height", "<-- nozzle (10,10) * T \| \| H * \| (-) \| T", "\| T * \| \| * O-- FRONT --+ * (0,0) / #define", "only go up. Any advice? I've definitely done a few searches but haven't", "endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX", "// Mechanical endstop with COM to ground and NC to Signal uses \"false\"", "When changing speed and direction, if the difference is less than the ", "in mm) #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS", "//#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector. //#define Z_SERVO_ANGLES {70,0} //", "from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2", "the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes.", "option for a probe connected to the Z Min endstop pin. / #define", " A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g.,", "an endstop switch on a rotating arm. / //#define Z_ENDSTOP_SERVO_NR 0 // Defaults", "enabled, saved values will override these. / /** * With this option each", "test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting Stepper Enable Pins (Active Low)", "range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20", "movement commands. //#define MIN_SOFTWARE_ENDSTOPS // If enabled, axes won't move above MAX_POS in", "// Uncomment to use internal pullup for filament runout pins if the sensor", "set the printer up. Using Marlin 1.1.3 with a RAMPS 1.4. Both motors", "any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG", "to disable the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual", "non-probe purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define", "Unit (steps/mm) * Override with M92 * X, Y, Z, E0 [, E1[,", "commands * or (with LCD_BED_LEVELING) the LCD controller. / //#define PROBE_MANUALLY /* ", "must be integers. * In the following example the X and Y", "* F \| (-) N (+) \| G <-- nozzle (10,10) * T", "-left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y offset: -front +behind", "* Override with M203 * X, Y, Z, E0 [, E1[, E2[, E3[,", "chance of losing position accuracy! #define DISABLE_X false #define DISABLE_Y false #define DISABLE_Z", "a servo. / //#define BLTOUCH #if ENABLED(BLTOUCH) //#define BLTOUCH_DELAY 375 // (ms) Enable", "poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //============================== Movement", "effect sensor and emulates a servo. / //#define BLTOUCH #if ENABLED(BLTOUCH) //#define BLTOUCH_DELAY", "Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //", "are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4", "/** * Filament Runout Sensor * A mechanical or opto endstop is used", "repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting Stepper Enable", "* Probe Type * * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE,", "have its own factors for the * following movement settings. If fewer factors", "to nozzle (X,Y) offset, relative to (0, 0). * X and Y offsets", "over and above any (negative) * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851,", "sensor. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins", "* Z_MIN_PROBE_ENDSTOP * * Enable this option for a probe connected to any", "M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20", "invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true", "// Enable this feature if all enabled endstop pins are interrupt-capable. // This", "Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] // X and Y", "X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_AXIS_STEPS_PER_UNIT {", "stepper drivers //#define CONFIG_STEPPERS_TOSHIBA // @section extruder // For direct drive extruder v9", "#if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic", "pullups. will be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define", "SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN. * By", "E4]]]] / #define DEFAULT_MAX_FEEDRATE { 200, 200, 3, 25 } /* * Default", "(-) N (+) \| G <-- nozzle (10,10) * T \| \| H", "ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN", "any pin except Z-Min. * (By default Marlin assumes the Z-Max endstop pin.)", "-front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the", "other hardware. * Servo-mounted probes require extra space for the arm to rotate.", "#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the", "the * total number of extruders, the last value applies to the rest.", "normally-closed switches to GND and D32. * - normally-open switches to 5V and", "Z Probe pin, set Z_MIN_PROBE_PIN below. * * - The simplest option is", "5 // Z Clearance between probe points // For M851 give a range", "printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000", "Deploy and Stow angles /** * The BLTouch probe uses a Hall effect", "problem. `Config.h` is as follows (clipped due to posting restrictions): ``` //=========================================================================== //==============================", "the sled. 0 should be fine but you can push it further if", "users of the * BLTouch probe, but may also help those with inductive", "Y, Z, E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_FEEDRATE { 200,", "/ //#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN Z_MAX_PIN /** * Probe Type * * Allen", "in software and they also only go up. Any advice? I've definitely done", "it may happen instantaneously. / #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK", "the last value applies to the rest. / //#define DISTINCT_E_FACTORS /** * Default", "(ms) Enable and increase if needed #endif /** * Enable if probing seems", "Y_PROBE_OFFSET_FROM_EXTRUDER 10 * * +-- BACK ---+ * \| \| * L \|", "Type * * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. ", "the stepper direction. Change (or reverse the motor connector) if an axis goes", "@section homing //#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing", "FIL_RUNOUT_PIN. By default the firmware assumes HIGH = has filament, LOW =", "INVERT_E3_DIR false #define INVERT_E4_DIR false // @section homing //#define Z_HOMING_HEIGHT 4 // (in", "A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an", "Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG", "#define INVERT_Z_DIR false // Enable this option for Toshiba stepper drivers //#define CONFIG_STEPPERS_TOSHIBA", "Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis", "(usually inductive) sensors. * * - RAMPS 1.3/1.4 boards may use the 5V,", "* / //#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN Z_MAX_PIN /* * Probe Type * ", "\| H \| (-) \| T * \| \| * O-- FRONT", "Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [,", "`M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.", "Speed for the \"accurate\" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)", "invert the logic of the probe. // Enable this feature if all enabled", "will remove the need to poll the interrupt pins, saving many CPU cycles.", "//#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif", "example the X and Y offsets are both positive: * #define X_PROBE_OFFSET_FROM_EXTRUDER 10", "Z_MAX_POS 200 // If enabled, axes won't move below MIN_POS in response to", "fans off when probing // A probe that is deployed and stowed with", "of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the", "inductive probe or a nozzle-based probe-switch.) / #define FIX_MOUNTED_PROBE /* * Z Servo", "#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves", "hitting the bed and other hardware. * Servo-mounted probes require extra space for", "* L \| (+) P \| R <-- probe (20,20) * E \|", "USE_YMAX_PLUG //#define USE_ZMAX_PLUG // coarse Endstop Settings //#define ENDSTOPPULLUPS // Comment this out", "pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //============================== Movement Settings ============================ //=============================================================================", "a nozzle-based probe-switch.) / #define FIX_MOUNTED_PROBE /* * Z Servo Probe, such as", "rotating arm. / //#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector. //#define", "Invert the stepper direction. Change (or reverse the motor connector) if an axis", "============================ //============================================================================= // @section motion /* * Default Settings * * These settings", "retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing)", "Z-axis will move down (and trigger the endstop) but it will only make", "up. Inverted the motor direction in software and they also only go up.", "Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive", "only the active extruder enabled. // @section machine // Invert the stepper direction.", "ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif //", "start speed for accelerated moves) * Override with M201 * X, Y, Z,", "probes // // See http://marlinfw.org/configuration/probes.html // /** * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * * Enable this", "that requires acceleration. * When changing speed and direction, if the difference is", "* X and Y offsets must be integers. * * In the following", "E2[, E3[, E4]]]] / #define DEFAULT_MAX_FEEDRATE { 200, 200, 3, 25 } /", "LCD. Only integer values >= 1 are valid here. * * Example:", "axes won't move below MIN_POS in response to movement commands. //#define MIN_SOFTWARE_ENDSTOPS //", "axis. Probes will use one or more of the // extra connectors. Leave", "move down (and trigger the endstop) but it will only make a quick", "false #define INVERT_Y_DIR false #define INVERT_Z_DIR false // Enable this option for Toshiba", "// For all extruders #define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder", "by M502 * * Note that if EEPROM is enabled, saved values will", "pin (SOL1_PIN) //#define SOLENOID_PROBE // A sled-mounted probe like those designed by Charles", "Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points // For M851 give a", "(e.g., an inductive probe or a nozzle-based probe-switch.) / #define FIX_MOUNTED_PROBE /* ", "10.0 #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 2.0 //=========================================================================== //============================= Z Probe Options =============================", "PROBING_HEATERS_OFF // Turn heaters off when probing //#define PROBING_FANS_OFF // Turn fans off", "it up. `M119` shows all endstops open. Min software stops are currently disabled,", "Warn on display about possibly reduced accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING // @section extruder #define", "Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E", "//#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with COM to ground and NC to", "height before homing (G28) for Z clearance above the bed, clamps, ... //", "(change/s) change = mm/s Override with M204 * * M204 P Acceleration", "doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a", "may use the 5V, GND, and Aux4->D32 pin: * - For simple switches", "X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 //", "Z Servo Deploy and Stow angles /** * The BLTouch probe uses a", "Inductive probes need space to keep from triggering early. * * Use these", "X_HOME_DIR -1 #define Y_HOME_DIR -1 #define Z_HOME_DIR -1 // @section machine // Travel", "// Specify here all the endstop connectors that are connected to any endstop", "sled. 0 should be fine but you can push it further if you'd", "Bed Leveling below. / /* * The \"Manual Probe\" provides a means to", "motion /** * Default Settings * * These settings can be reset by", "//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles /** * The", "be fine but you can push it further if you'd like. // //", "of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the", "also only go up. Any advice? I've definitely done a few searches but", "\| (-) \| T * \| \| * O-- FRONT --+ * (0,0)", "Z_MIN_POS 0 #define X_MAX_POS 230 #define Y_MAX_POS 200 #define Z_MAX_POS 200 // If", "point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // Use double touch for probing //#define", "the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to", "3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z", "Uncomment to use internal pullup for filament runout pins if the sensor is", "By default the firmware assumes HIGH = has filament, LOW = ran out", "Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 // Speed for", "uncoupled the entire X-axis carriage. Additional test: reversed the z-axis motor wires and", "speed change that requires acceleration. * When changing speed and direction, if the", "(using // at the start of the line) to disable the endstop pullup", "* M204 R Retract Acceleration * M204 T Travel Acceleration / #define DEFAULT_ACCELERATION", "will override these. / /** * With this option each E stepper can", "defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN", "for the arm to rotate. * Inductive probes need space to keep from", "extruders // Disables axis stepper immediately when it's not being used. // WARNING:", "(steps/mm) * Override with M92 * X, Y, Z, E0 [, E1[, E2[,", "false #define DISABLE_Y false #define DISABLE_Z false // Warn on display about possibly", "Movement Settings ============================ //============================================================================= // @section motion /** * Default Settings * ", "0 // Z offset: -below +above [the nozzle] // X and Y axis", "to nozzle. But: `M851 Z+1` with a CLEARANCE of 2 => 2mm", "during probing so as to minimize * potential EM interference by quieting/silencing the", "Servo-mounted probes require extra space for the arm to rotate. * Inductive probes", "`M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.", "to use a free endstop connector. * - Use 5V for powered (usually", "} /** * Default Max Feed Rate (mm/s) * Override with M203 ", "to raise the probe (or lower the bed). The values set here", "ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with COM to ground and NC", "Z, E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_ACCELERATION { 3000, 3000,", "is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE // A", "true to invert the logic of the sensor. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to", "// For Z_PROBE_ALLEN_KEY see the Delta example configurations. // /* * Z Probe", "Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test", "losing position accuracy! #define DISABLE_X false #define DISABLE_Y false #define DISABLE_Z false //", "E * * \"Jerk\" specifies the minimum speed change that requires acceleration. ", "a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * - The simplest", "200 #define Z_MAX_POS 200 // If enabled, axes won't move below MIN_POS in", "change * in current flowing through the wires). This is likely most useful", "#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // coarse Endstop", "moves) * Override with M201 * X, Y, Z, E0 [, E1[, E2[,", "//=========================================================================== // @section probes // // See http://marlinfw.org/configuration/probes.html // /** * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN ", "100, 100, 4000, 120 } /* * Default Max Feed Rate (mm/s) ", "X Y Z E * \"Jerk\" specifies the minimum speed change that", "must activate one of these to use Auto Bed Leveling below. / /", "Z Clearance between probe points // For M851 give a range for adjusting", "to specify the distance (mm) to raise the probe (or lower the", "it's not being used. // WARNING: When motors turn off there is a", "/ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 //", " WARNING: Setting the wrong pin may have unexpected and potentially * disastrous", "printers will be using one per axis. Probes will use one or more", "PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.", "homing (G28) for Z clearance above the bed, clamps, ... // Be sure", "can have its own factors for the * following movement settings. If fewer", "the Z-axis motors. Specifically, the Z-axis will move down (and trigger the endstop)", "coarse Endstop Settings //#define ENDSTOPPULLUPS // Comment this out (using // at the", "for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points // For", "D32. * * WARNING: Setting the wrong pin may have unexpected and potentially", "CLEARANCE of 2 => 2mm from bed to nozzle. / #define Z_CLEARANCE_DEPLOY_PROBE 10", "with COM to ground and NC to Signal uses \"false\" here (most common", "mm) Minimal z height before homing (G28) for Z clearance above the bed,", "DISABLE_Y false #define DISABLE_Z false // Warn on display about possibly reduced accuracy", "to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to", " * Note that if EEPROM is enabled, saved values will override these.", "immediately when it's not being used. // WARNING: When motors turn off there", "Override with M204 * * M204 P Acceleration * M204 R Retract Acceleration", "configurations. // /** * Z Probe to nozzle (X,Y) offset, relative to (0,", "probe. // Almost all printers will be using one per axis. Probes will", "2mm from bed to nozzle. / #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for", "nozzle (X,Y) offset, relative to (0, 0). X and Y offsets must", "are in mm) #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define", "* - normally-open switches to 5V and D32. * * WARNING: Setting the", "Acceleration * M204 T Travel Acceleration / #define DEFAULT_ACCELERATION 3000 // X, Y,", "will be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX", "Z Min endstop pin. / #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /** * Z_MIN_PROBE_ENDSTOP * * Enable", "reduced accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING // @section extruder #define DISABLE_E false // For all", "case. // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR", "ran out / //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to", "pin may have unexpected and potentially disastrous consequences. Use with caution and", "E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 4000,", "the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Speed for", "Z_MIN_PROBE_PIN below. * - The simplest option is to use a free", "accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING // @section extruder #define DISABLE_E false // For all extruders", "#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. // @section machine", "only go up. Inverted the motor direction in software and they also only", "common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic", "MIN_SOFTWARE_ENDSTOPS // If enabled, axes won't move above MAX_POS in response to movement", "pickup the sled. 0 should be fine but you can push it further", "endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of", "`Config.h` is as follows (clipped due to posting restrictions): ``` //=========================================================================== //============================== Endstop", "to define FIL_RUNOUT_PIN. * By default the firmware assumes HIGH = has filament,", "invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true", "the active extruder enabled. // @section machine // Invert the stepper direction. Change", "endstop or probe. // Almost all printers will be using one per axis.", "by quieting/silencing the source of the 'noise' (the change * in current flowing", "position accuracy! #define DISABLE_X false #define DISABLE_Y false #define DISABLE_Z false // Warn", "// Warn on display about possibly reduced accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING // @section extruder", "mm/s * (Maximum start speed for accelerated moves) * Override with M201 ", "geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false #define INVERT_E2_DIR", "start of the line) to disable the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) //", "need space to keep from triggering early. * Use these settings to", "X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS 230 #define Y_MAX_POS", "axis stepper immediately when it's not being used. // WARNING: When motors turn", "the endstop connectors that are connected to any endstop or probe. // Almost", "#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } /** * Default Acceleration (change/s)", "[the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] //", "M204 T Travel Acceleration / #define DEFAULT_ACCELERATION 3000 // X, Y, Z and", "#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Speed for the \"accurate\" probe of each point #define", "the bed). The values set here apply over and above any (negative) ", "R Retract Acceleration * M204 T Travel Acceleration / #define DEFAULT_ACCELERATION 3000 //", "// Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset:", "FRONT --+ (0,0) / #define X_PROBE_OFFSET_FROM_EXTRUDER 22 // X offset: -left +right", "accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting Stepper Enable Pins (Active Low) use 0,", "each point with movement commands or (with LCD_BED_LEVELING) the LCD controller. /", "Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. You must activate one of these", "//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN Z_MAX_PIN /** * Probe Type * * Allen Key", "nozzle] // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED", "ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with COM to ground", "at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller.", "assumes the Z-Max endstop pin.) * To use a custom Z Probe pin,", "to SERVO 0 connector. //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow", "* Inductive probes need space to keep from triggering early. * * Use", "a i3 MK2 clone and have run into a problem with the Z-axis", "FIX_MOUNTED_PROBE, etc. * You must activate one of these to use Auto Bed", "make a quick noise if I try to move it up. `M119` shows", "remove the need to poll the interrupt pins, saving many CPU cycles. //#define", "or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.)", "may need to define FIL_RUNOUT_PIN. * By default the firmware assumes HIGH =", "and increase if needed #endif /** * Enable if probing seems unreliable. Heaters", "MK2 clone and have run into a problem with the Z-axis motors. Specifically,", "4 // (in mm) Minimal z height before homing (G28) for Z clearance", "Y, Z acceleration for travel (non printing) moves /** * Default Jerk (mm/s)", "movement commands. //#define MAX_SOFTWARE_ENDSTOPS /** * Filament Runout Sensor * A mechanical or", "* Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * * Enable this option for a probe connected to the", "a probe connected to the Z Min endstop pin. / #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /", "CLEARANCE of 4 => 9mm from bed to nozzle. But: `M851 Z+1`", "the probe (or * lower the bed). The values set here apply over", "the Z height at each point with movement commands * or (with LCD_BED_LEVELING)", "pullup for filament runout pins if the sensor is defined. #define FILAMENT_RUNOUT_SCRIPT \"M600\"", "turn and I've even uncoupled the entire X-axis carriage. Additional test: reversed the", "* (Maximum start speed for accelerated moves) * Override with M201 * X,", "#define DISABLE_X false #define DISABLE_Y false #define DISABLE_Z false // Warn on display", "at the start of the line) to disable the endstop pullup resistors #if", "with M92 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] /", "but you can push it further if you'd like. // // For Z_PROBE_ALLEN_KEY", " A mechanical or opto endstop is used to check for the presence", "v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false", "* Enable this option for a probe connected to the Z Min endstop", "#define Y_MAX_POS 200 #define Z_MAX_POS 200 // If enabled, axes won't move below", "The \"Manual Probe\" provides a means to do \"Auto\" Bed Leveling without a", "a Hall effect sensor and emulates a servo. / //#define BLTOUCH #if ENABLED(BLTOUCH)", "// Z Servo Deploy and Stow angles /* * The BLTouch probe uses", "Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 //", "to 5V and D32. * * WARNING: Setting the wrong pin may have", "more of the // extra connectors. Leave undefined any used for non-endstop and", "//#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must", "HIGH = has filament, LOW = ran out / //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR)", "CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //============================== Movement Settings ============================ //============================================================================= // @section motion", "extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG", "to true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR", "from triggering early. * Use these settings to specify the distance (mm)", "Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance", "* Filament Runout Sensor * A mechanical or opto endstop is used to", "you'd like. // // For Z_PROBE_ALLEN_KEY see the Delta example configurations. // /*", "specifies the minimum speed change that requires acceleration. When changing speed and", "endstop connector. * - Use 5V for powered (usually inductive) sensors. * ", "// E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration", "above the bed, clamps, ... // Be sure you have this distance over", "/ #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 4000, 120 } /** * Default Max", "ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of", "lower the bed). The values set here apply over and above any (negative)", "powered (usually inductive) sensors. * * - RAMPS 1.3/1.4 boards may use the", "/ #define FIX_MOUNTED_PROBE /* * Z Servo Probe, such as an endstop switch", "Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.", "response to movement commands. //#define MIN_SOFTWARE_ENDSTOPS // If enabled, axes won't move above", "DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. // @section machine //", ":{ 0:'Low', 1:'High' } #define X_ENABLE_ON 0 #define Y_ENABLE_ON 0 #define Z_ENABLE_ON 0", "endstop connectors that are connected to any endstop or probe. // Almost all", "logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert", "and I've even uncoupled the entire X-axis carriage. Additional test: reversed the z-axis", "option each E stepper can have its own factors for the * following", "off when probing //#define PROBING_FANS_OFF // Turn fans off when probing // A", "and moving between * probe points to avoid hitting the bed and other", "of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the", "provides a means to do \"Auto\" Bed Leveling without a probe. * Use", "* lower the bed). The values set here apply over and above any", "z-axis motor wires and they only go up. Inverted the motor direction in", "deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) / #define FIX_MOUNTED_PROBE", "nozzle-based probe-switch.) / #define FIX_MOUNTED_PROBE /** * Z Servo Probe, such as an", "they only go up. Inverted the motor direction in software and they also", "the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y offset: -front +behind [the nozzle] #define", "and non-probe purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG", "minimum speed change that requires acceleration. * When changing speed and direction, if", "of the build of a i3 MK2 clone and have run into a", "High) use 1 // :{ 0:'Low', 1:'High' } #define X_ENABLE_ON 0 #define Y_ENABLE_ON", "for the * following movement settings. If fewer factors are given than the", "// set to true to invert the logic of the sensor. #define ENDSTOPPULLUP_FIL_RUNOUT", "motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define", "Turn fans off when probing // A probe that is deployed and stowed", "probing so as to minimize * potential EM interference by quieting/silencing the source", "rotate. * Inductive probes need space to keep from triggering early. * ", "for accelerated moves) Override with M201 * X, Y, Z, E0 [,", "connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR", "be disabled during probing so as to minimize * potential EM interference by", "the endstop) but it will only make a quick noise if I try", "the motor direction in software and they also only go up. Any advice?", "nozzle (10,10) * T \| \| H * \| (-) \| T ", "Almost all printers will be using one per axis. Probes will use one", "nozzle. But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from", "* Enable this option for a probe connected to any pin except Z-Min.", "motors turn off there is a chance of losing position accuracy! #define DISABLE_X", "DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 2.0 //=========================================================================== //=============================", "// // See http://marlinfw.org/configuration/probes.html // /** * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * * Enable this option", "//#define SOLENOID_PROBE // A sled-mounted probe like those designed by Charles Bell. //#define", "#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the", "\"Auto\" Bed Leveling without a probe. * Use G29 repeatedly, adjusting the Z", "P \| R <-- probe (20,20) * E \| \| I * F", "and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 // Speed", "10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between", "5 // The extra distance the X axis must travel to pickup the", "USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // coarse Endstop Settings //#define ENDSTOPPULLUPS // Comment", "(mm) to raise the probe (or * lower the bed). The values set", "like. // // For Z_PROBE_ALLEN_KEY see the Delta example configurations. // /** ", "the LCD. Only integer values >= 1 are valid here. * ", "settings can be reset by M502 * Note that if EEPROM is", "(non printing) moves /** * Default Jerk (mm/s) * Override with M205 X", "LOW = ran out / //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false //", "@section extruder // For direct drive extruder v9 set to true, for geared", "Z probes require clearance when deploying, stowing, and moving between probe points", "#define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false // @section homing //#define", "- For simple switches connect... * - normally-closed switches to GND and D32.", "/ /* * With this option each E stepper can have its own", "/** * The \"Manual Probe\" provides a means to do \"Auto\" Bed Leveling", "PROBE_DOUBLE_TOUCH /** * Z probes require clearance when deploying, stowing, and moving between", "Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.", "change that requires acceleration. * When changing speed and direction, if the difference", "In the following example the X and Y offsets are both positive: ", "have this distance over your Z_MAX_POS in case. // Direction of endstops when", "in case. // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define", "T \| \| H \| (-) \| T * \| \| ", "the source of the 'noise' (the change in current flowing through the", "given than the * total number of extruders, the last value applies to", "the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic", "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * * Enable this option for a probe connected to the Z", "probing //#define PROBING_FANS_OFF // Turn fans off when probing // A probe that", "printer up. Using Marlin 1.1.3 with a RAMPS 1.4. Both motors turn and", "the minimum speed change that requires acceleration. * When changing speed and direction,", "all printers will be using one per axis. Probes will use one or", "//============================== Movement Settings ============================ //============================================================================= // @section motion /** * Default Settings ", "used to check for the presence of filament. * RAMPS-based boards use", "the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic", "to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true //", "accelerated moves) * Override with M201 * X, Y, Z, E0 [, E1[,", "* or (with LCD_BED_LEVELING) the LCD controller. / //#define PROBE_MANUALLY /* * A", "A mechanical or opto endstop is used to check for the presence of", "ENDSTOPPULLUPS // Comment this out (using // at the start of the line)", "10000 } /** * Default Acceleration (change/s) change = mm/s * Override with", "axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 // Speed for the", "\| R <-- probe (20,20) * E \| \| I * F \|", "to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR", "controller. / //#define PROBE_MANUALLY /* * A Fix-Mounted Probe either doesn't deploy or", "to any endstop or probe. // Almost all printers will be using one", "\"Manual Probe\" provides a means to do \"Auto\" Bed Leveling without a probe.", "from bed to nozzle. / #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow", "Default Max Acceleration (change/s) change = mm/s (Maximum start speed for accelerated", "but may also help those with inductive or other probe types. / //#define", "connected to the Z Min endstop pin. / #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /** * Z_MIN_PROBE_ENDSTOP", "avoid hitting the bed and other hardware. * Servo-mounted probes require extra space", "set here apply over and above any (negative) * probe Z Offset set", "Leveling without a probe. * Use G29 repeatedly, adjusting the Z height at", "Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel", "You must activate one of these to use Auto Bed Leveling below. /", "Stow angles /* * The BLTouch probe uses a Hall effect sensor and", "pin. / #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /* * Z_MIN_PROBE_ENDSTOP * * Enable this option for", "//#define ENDSTOPPULLUPS // Comment this out (using // at the start of the", "the X and Y offsets are both positive: * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 ", "set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false", "5V and D32. * WARNING: Setting the wrong pin may have unexpected", "Z-Sled Probes, FIX_MOUNTED_PROBE, etc. * You must activate one of these to use", "Z, E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100,", "own factors for the following movement settings. If fewer factors are given", "// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active", "// If enabled, axes won't move above MAX_POS in response to movement commands.", "few searches but haven't solved the problem. `Config.h` is as follows (clipped due", "#define Z_MIN_POS 0 #define X_MAX_POS 230 #define Y_MAX_POS 200 #define Z_MAX_POS 200 //", "specify the distance (mm) to raise the probe (or * lower the bed).", "mechanical or opto endstop is used to check for the presence of filament.", "this feature if all enabled endstop pins are interrupt-capable. // This will remove", "Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. * Only integer values", "X and Y offsets are both positive: * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define", "#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the", "For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN", "its own factors for the * following movement settings. If fewer factors are", "// X, Y, Z acceleration for travel (non printing) moves /** * Default", "the presence of filament. * * RAMPS-based boards use SERVO3_PIN. * For other", "USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // coarse Endstop Settings", "set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define", "as to minimize * potential EM interference by quieting/silencing the source of the", "+behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]", "Toshiba stepper drivers //#define CONFIG_STEPPERS_TOSHIBA // @section extruder // For direct drive extruder", "a rotating arm. / //#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector.", " - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin:", "* Default Max Acceleration (change/s) change = mm/s * (Maximum start speed for", "The values set here apply over and above any (negative) * probe Z", "simplest option is to use a free endstop connector. * - Use 5V", "distance the X axis must travel to pickup the sled. 0 should be", "endstop) but it will only make a quick noise if I try to", "one or more of the // extra connectors. Leave undefined any used for", "FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the", "opto endstop is used to check for the presence of filament. * ", "Servo Deploy and Stow angles /* * The BLTouch probe uses a Hall", "Individual pullups. will be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX", "Defaults to SERVO 0 connector. //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and", "DISTINCT_E_FACTORS /** * Default Axis Steps Per Unit (steps/mm) * Override with M92", "last value applies to the rest. / //#define DISTINCT_E_FACTORS /* * Default Axis", "#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the", "#define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG //", "boards you may need to define FIL_RUNOUT_PIN. * By default the firmware assumes", "Y, Z, E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_ACCELERATION { 3000,", "probe points // For M851 give a range for adjusting the Z probe", "This is likely most useful to users of the BLTouch probe, but", "Use 5V for powered (usually inductive) sensors. * * - RAMPS 1.3/1.4 boards", "* Only integer values >= 1 are valid here. * * Example: `M851", "double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Speed for the \"accurate\" probe of", "those with inductive or other probe types. / //#define PROBING_HEATERS_OFF // Turn heaters", "X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_FEEDRATE {", "This will remove the need to poll the interrupt pins, saving many CPU", "// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** * Z probes require", "consistent with the * options selected below - will be disabled during probing", "//#define PROBE_DOUBLE_TOUCH /** * Z probes require clearance when deploying, stowing, and moving", "/ //#define DISTINCT_E_FACTORS /* * Default Axis Steps Per Unit (steps/mm) * Override", "(Z_PROBE_SPEED_FAST / 2) // Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** ", "Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use", "#endif /* * Enable if probing seems unreliable. Heaters and/or fans - consistent", "(mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2[,", "than the * total number of extruders, the last value applies to the", "probe types. / //#define PROBING_HEATERS_OFF // Turn heaters off when probing //#define PROBING_FANS_OFF", "seems unreliable. Heaters and/or fans - consistent with the options selected below", "N (+) \| G <-- nozzle (10,10) * T \| \| H ", "Enable this feature if all enabled endstop pins are interrupt-capable. // This will", "invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true", "E2[, E3[, E4]]]] / #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 4000, 120 } /*", "INVERT_E0_DIR false #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR", "if EEPROM is enabled, saved values will override these. / /** * With", "//#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert", "further if you'd like. // // For Z_PROBE_ALLEN_KEY see the Delta example configurations.", "saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //============================== Movement Settings ============================ //============================================================================= //", "the start of the line) to disable the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS)", "(clipped due to posting restrictions): ``` //=========================================================================== //============================== Endstop Settings =========================== //=========================================================================== //", "(units are in mm) #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0", "(Maximum start speed for accelerated moves) * Override with M201 * X, Y,", "3000, 100, 10000 } /** * Default Acceleration (change/s) change = mm/s ", "/* * Enable if probing seems unreliable. Heaters and/or fans - consistent with", "need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE //=============================================================================", "With this option each E stepper can have its own factors for the", "false // set to true to invert the logic of the sensor. #define", "-below +above [the nozzle] // X and Y axis travel speed (mm/m) between", "{ 100, 100, 4000, 120 } /** * Default Max Feed Rate (mm/s)", "3000 // X, Y, Z acceleration for travel (non printing) moves /** ", "Using Marlin 1.1.3 with a RAMPS 1.4. Both motors turn and I've even", "are connected to any endstop or probe. // Almost all printers will be", "Filament Runout Sensor A mechanical or opto endstop is used to check", "deploying, stowing, and moving between * probe points to avoid hitting the bed", "sensor and emulates a servo. / //#define BLTOUCH #if ENABLED(BLTOUCH) //#define BLTOUCH_DELAY 375", "Endstop Settings //#define ENDSTOPPULLUPS // Comment this out (using // at the start", " X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_ACCELERATION", "endstop is used to check for the presence of filament. * RAMPS-based", "Change (or reverse the motor connector) if an axis goes the wrong way.", "homing //#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28)", "Note that if EEPROM is enabled, saved values will override these. / /", "applies to the rest. / //#define DISTINCT_E_FACTORS /** * Default Axis Steps Per", "of 2 => 2mm from bed to nozzle. / #define Z_CLEARANCE_DEPLOY_PROBE 10 //", "Probe either doesn't deploy or needs manual deployment. (e.g., an inductive probe", "invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true", "entire X-axis carriage. Additional test: reversed the z-axis motor wires and they only", "// For all extruders // Disables axis stepper immediately when it's not being", "\| \| I * F \| (-) N (+) \| G <-- nozzle", "false // Enable this option for Toshiba stepper drivers //#define CONFIG_STEPPERS_TOSHIBA // @section", "\| * O-- FRONT --+ * (0,0) / #define X_PROBE_OFFSET_FROM_EXTRUDER 22 // X", " For other boards you may need to define FIL_RUNOUT_PIN. * By default", "* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * X", "Pins (Active Low) use 0, Non Inverting (Active High) use 1 // :{", "#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the", "homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR -1 #define Z_HOME_DIR", "(+) \| G <-- nozzle (10,10) * T \| \| H * \|", "#define INVERT_Y_DIR false #define INVERT_Z_DIR false // Enable this option for Toshiba stepper", "trigger the endstop) but it will only make a quick noise if I", "GND, and Aux4->D32 pin: * - For simple switches connect... * - normally-closed", "I * F \| (-) N (+) \| G <-- nozzle (10,10) ", "enabled, axes won't move below MIN_POS in response to movement commands. //#define MIN_SOFTWARE_ENDSTOPS", " \"Jerk\" specifies the minimum speed change that requires acceleration. * When changing", "stops are currently disabled, as I try to set the printer up. Using", "of extruders, the last value applies to the rest. / //#define DISTINCT_E_FACTORS /", " To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * ", " * Enable this option for a probe connected to the Z Min", "// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000", "Z Probe Options ============================= //=========================================================================== // @section probes // // See http://marlinfw.org/configuration/probes.html //", "E3[, E4]]]] / #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 4000, 120 } /* ", "are given than the total number of extruders, the last value applies", "false #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false // @section homing", "probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability", "this option for a probe connected to the Z Min endstop pin. /", "I've even uncoupled the entire X-axis carriage. Additional test: reversed the z-axis motor", "other probe types. / //#define PROBING_HEATERS_OFF // Turn heaters off when probing //#define", "and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE // A sled-mounted probe", "\| \| H * \| (-) \| T * \| \| * O--", "X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk", "above MAX_POS in response to movement commands. //#define MAX_SOFTWARE_ENDSTOPS /** * Filament Runout", "through the wires). This is likely most useful to users of the ", "//#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // coarse Endstop Settings //#define ENDSTOPPULLUPS // Comment this", "solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE // A sled-mounted probe like those designed by", "filament runout pins if the sensor is defined. #define FILAMENT_RUNOUT_SCRIPT \"M600\" #endif ```", "the rest. / //#define DISTINCT_E_FACTORS /** * Default Axis Steps Per Unit (steps/mm)", "changing speed and direction, if the difference is less than the * value", "require extra space for the arm to rotate. * Inductive probes need space", "3000 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION", "change = mm/s * (Maximum start speed for accelerated moves) * Override with", "for travel (non printing) moves /** * Default Jerk (mm/s) * Override with", "with movement commands * or (with LCD_BED_LEVELING) the LCD controller. / //#define PROBE_MANUALLY", "// Keep only the active extruder enabled. // @section machine // Invert the", "each E stepper can have its own factors for the following movement", "Override with M205 X Y Z E * * \"Jerk\" specifies the minimum", "searches but haven't solved the problem. `Config.h` is as follows (clipped due to", "Auto Bed Leveling below. / /* * The \"Manual Probe\" provides a means", "many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //============================== Movement Settings ============================ //============================================================================= // @section", "below MIN_POS in response to movement commands. //#define MIN_SOFTWARE_ENDSTOPS // If enabled, axes", "// Be sure you have this distance over your Z_MAX_POS in case. //", "logic of the sensor. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for", "to set the printer up. Using Marlin 1.1.3 with a RAMPS 1.4. Both", "12 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z", "XY_PROBE_SPEED 8000 // Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define", "Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X", "set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false", "DEFAULT_EJERK 2.0 //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== // @section probes //", "it further if you'd like. // // For Z_PROBE_ALLEN_KEY see the Delta example", "the bed, clamps, ... // Be sure you have this distance over your", "stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE // A sled-mounted probe like", "a CLEARANCE of 2 => 2mm from bed to nozzle. / #define Z_CLEARANCE_DEPLOY_PROBE", "#define INVERT_E4_DIR false // @section homing //#define Z_HOMING_HEIGHT 4 // (in mm) Minimal", " disastrous consequences. Use with caution and do your homework. * / //#define", "for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 //", "extra distance the X axis must travel to pickup the sled. 0 should", "#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * +-- BACK ---+ * \| \| * L", "{70,0} // Z Servo Deploy and Stow angles /** * The BLTouch probe", "valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 =>", "with M203 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] /", "when it's not being used. // WARNING: When motors turn off there is", "will move down (and trigger the endstop) but it will only make a", "the X axis must travel to pickup the sled. 0 should be fine", "the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic", "+right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y offset: -front +behind [the", "INVERT_Z_DIR false // Enable this option for Toshiba stepper drivers //#define CONFIG_STEPPERS_TOSHIBA //", "z height before homing (G28) for Z clearance above the bed, clamps, ...", "(SOL1_PIN) //#define SOLENOID_PROBE // A sled-mounted probe like those designed by Charles Bell.", "connected to any pin except Z-Min. (By default Marlin assumes the Z-Max", "try to set the printer up. Using Marlin 1.1.3 with a RAMPS 1.4.", "travel (non printing) moves /** * Default Jerk (mm/s) * Override with M205", "turn off there is a chance of losing position accuracy! #define DISABLE_X false", "the * BLTouch probe, but may also help those with inductive or other", "with M204 * * M204 P Acceleration * M204 R Retract Acceleration ", "for the \"accurate\" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) //", "or more of the // extra connectors. Leave undefined any used for non-endstop", "the wires). This is likely most useful to users of the BLTouch", "O-- FRONT --+ * (0,0) / #define X_PROBE_OFFSET_FROM_EXTRUDER 22 // X offset: -left", "and do your homework. / //#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN Z_MAX_PIN /* ", "direct drive extruder v9 set to true, for geared extruder set to false.", "These settings can be reset by M502 * Note that if EEPROM", "F \| (-) N (+) \| G <-- nozzle (10,10) * T \|", "E3[, E4]]]] / #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } /* ", "should be fine but you can push it further if you'd like. //", "pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will be ignored", "uses \"false\" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true", "E \| \| I F \| (-) N (+) \| G <--", "--+ * (0,0) / #define X_PROBE_OFFSET_FROM_EXTRUDER 22 // X offset: -left +right [of", "X-axis carriage. Additional test: reversed the z-axis motor wires and they only go", "to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false //", "settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define", "noise if I try to move it up. `M119` shows all endstops open.", "stowing, and moving between probe points to avoid hitting the bed and", "space for the arm to rotate. * Inductive probes need space to keep", "For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High)", "200, 200, 3, 25 } /** * Default Max Acceleration (change/s) change =", "200, 3, 25 } /** * Default Max Acceleration (change/s) change = mm/s", "all extruders // Disables axis stepper immediately when it's not being used. //", "needed #endif /** * Enable if probing seems unreliable. Heaters and/or fans -", "probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // Use double touch", "response to movement commands. //#define MAX_SOFTWARE_ENDSTOPS /** * Filament Runout Sensor * A", "example configurations. // /** * Z Probe to nozzle (X,Y) offset, relative to", "mm) #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS 230", "P Acceleration * M204 R Retract Acceleration * M204 T Travel Acceleration /", "probe uses a Hall effect sensor and emulates a servo. / //#define BLTOUCH", "etc. * You must activate one of these to use Auto Bed Leveling", "#define Z_MAX_POS 200 // If enabled, axes won't move below MIN_POS in response", "@section machine // Invert the stepper direction. Change (or reverse the motor connector)", "the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to", "true, for geared extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false", "one of these to use Auto Bed Leveling below. / /* * The", "1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR -1 #define Z_HOME_DIR -1", "bed). The values set here apply over and above any (negative) * probe", "unreliable. Heaters and/or fans - consistent with the * options selected below -", "logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert", "using one per axis. Probes will use one or more of the //", "false // For all extruders #define DISABLE_INACTIVE_EXTRUDER true // Keep only the active", "ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //============================== Movement Settings ============================ //============================================================================= // @section motion /** * Default", "when deploying, stowing, and moving between * probe points to avoid hitting the", "#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z", "to invert the logic of the probe. // Enable this feature if all", "// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define", "a few searches but haven't solved the problem. `Config.h` is as follows (clipped", "Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points // For M851", "to avoid hitting the bed and other hardware. * Servo-mounted probes require extra", "The BLTouch probe uses a Hall effect sensor and emulates a servo. /", "// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined", "Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // Use double touch for probing //#define PROBE_DOUBLE_TOUCH /", "restrictions): ``` //=========================================================================== //============================== Endstop Settings =========================== //=========================================================================== // @section homing // Specify", "Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Speed for the \"accurate\" probe of each point #define Z_PROBE_SPEED_SLOW", "be using one per axis. Probes will use one or more of the", "mm/s Override with M204 * * M204 P Acceleration * M204 R", "// @section homing // Specify here all the endstop connectors that are connected", "* * \"Jerk\" specifies the minimum speed change that requires acceleration. * When", "to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to", "rest. / //#define DISTINCT_E_FACTORS /* * Default Axis Steps Per Unit (steps/mm) ", "sled-mounted probe like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5", "to movement commands. //#define MIN_SOFTWARE_ENDSTOPS // If enabled, axes won't move above MAX_POS", "(mm/s) Override with M205 X Y Z E * * \"Jerk\" specifies", "PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Speed for the \"accurate\" probe of each point", "DISABLE_E false // For all extruders #define DISABLE_INACTIVE_EXTRUDER true // Keep only the", "(with LCD_BED_LEVELING) the LCD controller. / //#define PROBE_MANUALLY /* * A Fix-Mounted Probe", "with M201 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] /", "// For M851 give a range for adjusting the Z probe offset #define", " Z Servo Probe, such as an endstop switch on a rotating arm.", "repeatedly, adjusting the Z height at each point with movement commands * or", "// (in mm) Minimal z height before homing (G28) for Z clearance above", "of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the", "X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.", "simple switches connect... * - normally-closed switches to GND and D32. * -", "= ran out / //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set", "for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non", "extruder enabled. // @section machine // Invert the stepper direction. Change (or reverse", "M92 X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] / #define", "0 connector. //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles /", "off when probing // A probe that is deployed and stowed with a", "RAMPS-based boards use SERVO3_PIN. For other boards you may need to define", "#define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to", "pin, set Z_MIN_PROBE_PIN below. * * - The simplest option is to use", "drive extruder v9 set to true, for geared extruder set to false. #define", "M201 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] / #define", "on a rotating arm. / //#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0", "most useful to users of the * BLTouch probe, but may also help", "E3[, E4]]]] / #define DEFAULT_MAX_FEEDRATE { 200, 200, 3, 25 } /* ", "(the change in current flowing through the wires). This is likely most", "display about possibly reduced accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING // @section extruder #define DISABLE_E false", "when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR -1 #define", "use one or more of the // extra connectors. Leave undefined any used", "* total number of extruders, the last value applies to the rest. /", "require clearance when deploying, stowing, and moving between probe points to avoid", "// Speed for the \"accurate\" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST /", "NC to Signal uses \"false\" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true //", "0 #define Y_ENABLE_ON 0 #define Z_ENABLE_ON 0 #define E_ENABLE_ON 0 // For all", "1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: * - For", "fine but you can push it further if you'd like. // // For", "disabled, as I try to set the printer up. Using Marlin 1.1.3 with", "Settings =========================== //=========================================================================== // @section homing // Specify here all the endstop connectors", "without a probe. * Use G29 repeatedly, adjusting the Z height at each", "to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to", "follows (clipped due to posting restrictions): ``` //=========================================================================== //============================== Endstop Settings =========================== //===========================================================================", "X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_ACCELERATION {", "clone and have run into a problem with the Z-axis motors. Specifically, the", "as an endstop switch on a rotating arm. / //#define Z_ENDSTOP_SERVO_NR 0 //", "probe (20,20) * E \| \| I * F \| (-) N (+)", "currently disabled, as I try to set the printer up. Using Marlin 1.1.3", "reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR", "/ //#define PROBING_HEATERS_OFF // Turn heaters off when probing //#define PROBING_FANS_OFF // Turn", "1 // :{ 0:'Low', 1:'High' } #define X_ENABLE_ON 0 #define Y_ENABLE_ON 0 #define", "Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48", "double touch for probing //#define PROBE_DOUBLE_TOUCH /* * Z probes require clearance when", "For all extruders // Disables axis stepper immediately when it's not being used.", "speed and direction, if the difference is less than the * value set", "with a CLEARANCE of 2 => 2mm from bed to nozzle. / #define", "if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define", "#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points // For M851 give", "WARNING: Setting the wrong pin may have unexpected and potentially disastrous consequences.", "endstop with COM to ground and NC to Signal uses \"false\" here (most", "230 #define Y_MAX_POS 200 #define Z_MAX_POS 200 // If enabled, axes won't move", "@section homing // Specify here all the endstop connectors that are connected to", "the line) to disable the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop", "for a probe connected to the Z Min endstop pin. / #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN", "DISABLE_REDUCED_ACCURACY_WARNING // @section extruder #define DISABLE_E false // For all extruders #define DISABLE_INACTIVE_EXTRUDER", "// /* * Z Probe to nozzle (X,Y) offset, relative to (0, 0).", "Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration", "* (By default Marlin assumes the Z-Max endstop pin.) * To use a", "to (0, 0). * X and Y offsets must be integers. * ", "#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the", "// WARNING: When motors turn off there is a chance of losing position", "the 5V, GND, and Aux4->D32 pin: - For simple switches connect... ", "or probe. // Almost all printers will be using one per axis. Probes", "Inverted the motor direction in software and they also only go up. Any", "/* * Z Probe to nozzle (X,Y) offset, relative to (0, 0). ", "of the 'noise' (the change in current flowing through the wires). This", "false #define DISABLE_Z false // Warn on display about possibly reduced accuracy //#define", "* You must activate one of these to use Auto Bed Leveling below.", "false #define INVERT_Z_DIR false // Enable this option for Toshiba stepper drivers //#define", "/** * The BLTouch probe uses a Hall effect sensor and emulates a", "[the nozzle] // X and Y axis travel speed (mm/m) between probes #define", "* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed", "Non Inverting (Active High) use 1 // :{ 0:'Low', 1:'High' } #define X_ENABLE_ON", "5V, GND, and Aux4->D32 pin: * - For simple switches connect... * -", "printing) moves /** * Default Jerk (mm/s) * Override with M205 X Y", "either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or", "the logic of the probe. // Enable this feature if all enabled endstop", "pins are interrupt-capable. // This will remove the need to poll the interrupt", "false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false", "use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * * - The", "you have this distance over your Z_MAX_POS in case. // Direction of endstops", "//============================== Endstop Settings =========================== //=========================================================================== // @section homing // Specify here all the", "if I try to move it up. `M119` shows all endstops open. Min", "points to avoid hitting the bed and other hardware. * Servo-mounted probes require", "above any (negative) * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the", "E2[, E3[, E4]]]] / #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } /", "/* * Default Axis Steps Per Unit (steps/mm) * Override with M92 ", "types. / //#define PROBING_HEATERS_OFF // Turn heaters off when probing //#define PROBING_FANS_OFF //", "and other hardware. * Servo-mounted probes require extra space for the arm to", "a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX", "won't move above MAX_POS in response to movement commands. //#define MAX_SOFTWARE_ENDSTOPS /** ", "they also only go up. Any advice? I've definitely done a few searches", " The \"Manual Probe\" provides a means to do \"Auto\" Bed Leveling without", "LCD controller. / //#define PROBE_MANUALLY /* * A Fix-Mounted Probe either doesn't deploy", "first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Speed for the", "per axis. Probes will use one or more of the // extra connectors.", "Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points", "here, it may happen instantaneously. / #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 #define", "X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 //", "If enabled, axes won't move below MIN_POS in response to movement commands. //#define", " #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * * +-- BACK ---+", "// If enabled, axes won't move below MIN_POS in response to movement commands.", "(+) P \| R <-- probe (20,20) * E \| \| I ", "0 #define Z_ENABLE_ON 0 #define E_ENABLE_ON 0 // For all extruders // Disables", "USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // coarse", "E stepper can have its own factors for the following movement settings.", "@section machine // Travel limits after homing (units are in mm) #define X_MIN_POS", "direction, if the difference is less than the * value set here, it", "PROBING_FANS_OFF // Turn fans off when probing // A probe that is deployed", "these to use Auto Bed Leveling below. / /* * The \"Manual Probe\"", "Override with M203 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]", "Enable and increase if needed #endif /** * Enable if probing seems unreliable.", "/ #define DEFAULT_MAX_FEEDRATE { 200, 200, 3, 25 } /* * Default Max", "or (with LCD_BED_LEVELING) the LCD controller. / //#define PROBE_MANUALLY /* * A Fix-Mounted", "of filament. * * RAMPS-based boards use SERVO3_PIN. * For other boards you", "open. Min software stops are currently disabled, as I try to set the", "ground and NC to Signal uses \"false\" here (most common setup). #define X_MIN_ENDSTOP_INVERTING", "near the end of the build of a i3 MK2 clone and have", "and Y offsets are both positive: * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER", "to check for the presence of filament. * * RAMPS-based boards use SERVO3_PIN.", "both positive: * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * * +--", "settings to specify the distance (mm) to raise the probe (or * lower", "saved values will override these. / /* * With this option each E", "/ /* * The \"Manual Probe\" provides a means to do \"Auto\" Bed", "keep from triggering early. * * Use these settings to specify the distance", "set to true, for geared extruder set to false. #define INVERT_E0_DIR false #define", "assumes HIGH = has filament, LOW = ran out / //#define FILAMENT_RUNOUT_SENSOR #if", "Axis Steps Per Unit (steps/mm) Override with M92 * X, Y, Z,", "Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 #define", "to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to", "DISABLE_Z false // Warn on display about possibly reduced accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING //", "#define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * * +-- BACK ---+ ", "set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false", "and D32. - normally-open switches to 5V and D32. * * WARNING:", "disabled during probing so as to minimize * potential EM interference by quieting/silencing", "option for a probe connected to any pin except Z-Min. * (By default", "difference is less than the * value set here, it may happen instantaneously.", "Keep only the active extruder enabled. // @section machine // Invert the stepper", "an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR false #define", "a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE // A sled-mounted probe like those designed", "The extra distance the X axis must travel to pickup the sled. 0", "extruder // For direct drive extruder v9 set to true, for geared extruder", "0 // For all extruders // Disables axis stepper immediately when it's not", "with inductive or other probe types. / //#define PROBING_HEATERS_OFF // Turn heaters off", "solved the problem. `Config.h` is as follows (clipped due to posting restrictions): ```", "probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. Only integer", "of these to use Auto Bed Leveling below. / /* * The \"Manual", "for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Speed", "may happen instantaneously. / #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.4", "#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves", "// Turn fans off when probing // A probe that is deployed and", "to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true //", "the value set here, it may happen instantaneously. / #define DEFAULT_XJERK 10.0", "to nozzle. / #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES", "probe, but may also help those with inductive or other probe types. /", "---+ \| \| * L \| (+) P \| R <-- probe", "following movement settings. If fewer factors are given than the * total number", "logic of the probe. // Enable this feature if all enabled endstop pins", "offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above", "* Default Jerk (mm/s) * Override with M205 X Y Z E ", "\"false\" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to", "adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable", "give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define", "Z offset: -below +above [the nozzle] // X and Y axis travel speed", "//#define MIN_SOFTWARE_ENDSTOPS // If enabled, axes won't move above MAX_POS in response to", "so as to minimize potential EM interference by quieting/silencing the source of", "* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_FEEDRATE", "accuracy! #define DISABLE_X false #define DISABLE_Y false #define DISABLE_Z false // Warn on", " Z probes require clearance when deploying, stowing, and moving between * probe", "// Almost all printers will be using one per axis. Probes will use", "Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting", "GND and D32. * - normally-open switches to 5V and D32. * ", " T \| \| H * \| (-) \| T * \| \|", "you can push it further if you'd like. // // For Z_PROBE_ALLEN_KEY see", "for powered (usually inductive) sensors. * * - RAMPS 1.3/1.4 boards may use", "advice? I've definitely done a few searches but haven't solved the problem. `Config.h`", "Probes will use one or more of the // extra connectors. Leave undefined", "Probe Options ============================= //=========================================================================== // @section probes // // See http://marlinfw.org/configuration/probes.html // /*", "Settings //#define ENDSTOPPULLUPS // Comment this out (using // at the start of", "even uncoupled the entire X-axis carriage. Additional test: reversed the z-axis motor wires", "to ground and NC to Signal uses \"false\" here (most common setup). #define", " Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. * You must", "true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set", "by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the", "integers. * * In the following example the X and Y offsets are", "Any advice? I've definitely done a few searches but haven't solved the problem.", "travel to pickup the sled. 0 should be fine but you can push", "all extruders #define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. //", "of the * BLTouch probe, but may also help those with inductive or", "probe-switch.) / #define FIX_MOUNTED_PROBE /* * Z Servo Probe, such as an endstop", "below - will be disabled during probing so as to minimize * potential", "Low) use 0, Non Inverting (Active High) use 1 // :{ 0:'Low', 1:'High'", "apply over and above any (negative) * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER,", "of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // Use double touch for", "true // set to true to invert the logic of the probe. //", "sure you have this distance over your Z_MAX_POS in case. // Direction of", "move above MAX_POS in response to movement commands. //#define MAX_SOFTWARE_ENDSTOPS /** * Filament", "machine // Invert the stepper direction. Change (or reverse the motor connector) if", "INVERT_X_DIR false #define INVERT_Y_DIR false #define INVERT_Z_DIR false // Enable this option for", "/ #define X_PROBE_OFFSET_FROM_EXTRUDER 22 // X offset: -left +right [of the nozzle] #define", "#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X,", "or other probe types. / //#define PROBING_HEATERS_OFF // Turn heaters off when probing", "(0, 0). * X and Y offsets must be integers. * * In", "a problem with the Z-axis motors. Specifically, the Z-axis will move down (and", "#define Y_ENABLE_ON 0 #define Z_ENABLE_ON 0 #define E_ENABLE_ON 0 // For all extruders", "* * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. * You", "Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. /", "to pickup the sled. 0 should be fine but you can push it", "Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to", "default Marlin assumes the Z-Max endstop pin.) To use a custom Z", "Z-Max endstop pin.) * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN", "enabled. // @section machine // Invert the stepper direction. Change (or reverse the", "I've definitely done a few searches but haven't solved the problem. `Config.h` is", "height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD", "Acceleration / #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for", "#define Y_HOME_DIR -1 #define Z_HOME_DIR -1 // @section machine // Travel limits after", "to true to invert the logic of the probe. // Enable this feature", "as I try to set the printer up. Using Marlin 1.1.3 with a", "/* * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. ", "bed and other hardware. Servo-mounted probes require extra space for the arm", "#endif // Mechanical endstop with COM to ground and NC to Signal uses", "M205 X Y Z E * * \"Jerk\" specifies the minimum speed change", "the printer up. Using Marlin 1.1.3 with a RAMPS 1.4. Both motors turn", "//#define MAX_SOFTWARE_ENDSTOPS /** * Filament Runout Sensor * A mechanical or opto endstop", "any endstop or probe. // Almost all printers will be using one per", "here apply over and above any (negative) * probe Z Offset set with", "2 => 2mm from bed to nozzle. / #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z", "HOMING_FEEDRATE_Z // Speed for the \"accurate\" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST", "(or reverse the motor connector) if an axis goes the wrong way. #define", " potential EM interference by quieting/silencing the source of the 'noise' (the change", "the Z-Max endstop pin.) * To use a custom Z Probe pin, set", "use SERVO3_PIN. * For other boards you may need to define FIL_RUNOUT_PIN. ", "the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to true to", "8000 // Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST", "switches to GND and D32. - normally-open switches to 5V and D32.", "to movement commands. //#define MAX_SOFTWARE_ENDSTOPS /** * Filament Runout Sensor * A mechanical", "Z_HOME_DIR -1 // @section machine // Travel limits after homing (units are in", "feature if all enabled endstop pins are interrupt-capable. // This will remove the", "adjusting the Z height at each point with movement commands * or (with", "option is to use a free endstop connector. * - Use 5V for", "// Comment this out (using // at the start of the line) to", "#define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 2.0 //=========================================================================== //============================= Z Probe", "(-) \| T * \| \| * O-- FRONT --+ * (0,0) /", "current flowing through the wires). This is likely most useful to users of", "DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 2.0 //=========================================================================== //============================= Z Probe Options", "// @section homing //#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before", "acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel", "10 * +-- BACK ---+ * \| \| * L \| (+)", "to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false //", "[, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000", "being used. // WARNING: When motors turn off there is a chance of", "//#define PROBE_MANUALLY /* * A Fix-Mounted Probe either doesn't deploy or needs manual", "consequences. Use with caution and do your homework. * / //#define Z_MIN_PROBE_ENDSTOP //#define", "or the LCD. Only integer values >= 1 are valid here. ", "for non-endstop and non-probe purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG", "DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves #define", "build of a i3 MK2 clone and have run into a problem with", "INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false // @section", "a probe. Use G29 repeatedly, adjusting the Z height at each point", "Z clearance above the bed, clamps, ... // Be sure you have this", "all the endstop connectors that are connected to any endstop or probe. //", "motors. Specifically, the Z-axis will move down (and trigger the endstop) but it", "\| (-) N (+) \| G <-- nozzle (10,10) * T \| \|", "stepper direction. Change (or reverse the motor connector) if an axis goes the", "logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert", "Default Acceleration (change/s) change = mm/s * Override with M204 * * M204", "probe or a nozzle-based probe-switch.) / #define FIX_MOUNTED_PROBE /* * Z Servo Probe,", "ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE", "are interrupt-capable. // This will remove the need to poll the interrupt pins,", "* - For simple switches connect... * - normally-closed switches to GND and", "============================= //=========================================================================== // @section probes // // See http://marlinfw.org/configuration/probes.html // /** * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN", "0.4 #define DEFAULT_EJERK 2.0 //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== // @section", "set to true to invert the logic of the sensor. #define ENDSTOPPULLUP_FIL_RUNOUT //", "Both motors turn and I've even uncoupled the entire X-axis carriage. Additional test:", "- normally-closed switches to GND and D32. * - normally-open switches to 5V", "pin.) * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. ", "0 #define Z_MIN_POS 0 #define X_MAX_POS 230 #define Y_MAX_POS 200 #define Z_MAX_POS 200", "Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe.", "LCD_BED_LEVELING) the LCD controller. / //#define PROBE_MANUALLY /** * A Fix-Mounted Probe either", "invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to true", "must travel to pickup the sled. 0 should be fine but you can", "is to use a free endstop connector. * - Use 5V for powered", "0 #define E_ENABLE_ON 0 // For all extruders // Disables axis stepper immediately", "Z E * * \"Jerk\" specifies the minimum speed change that requires acceleration.", "//============================================================================= //============================== Movement Settings ============================ //============================================================================= // @section motion /** * Default Settings", "`M119` shows all endstops open. Min software stops are currently disabled, as I", "any (negative) * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD.", "Min endstop pin. / #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /* * Z_MIN_PROBE_ENDSTOP * * Enable this", "// :[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR -1 #define Z_HOME_DIR -1 // @section", "a RAMPS 1.4. Both motors turn and I've even uncoupled the entire X-axis", "pin: * - For simple switches connect... * - normally-closed switches to GND", "be integers. * * In the following example the X and Y offsets", "* Override with M204 * * M204 P Acceleration * M204 R Retract", "factors for the * following movement settings. If fewer factors are given than", "* * - The simplest option is to use a free endstop connector.", "disable the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups.", "heaters off when probing //#define PROBING_FANS_OFF // Turn fans off when probing //", "Override with M92 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]", "#define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS 230 #define", "motors turn and I've even uncoupled the entire X-axis carriage. Additional test: reversed", "#define X_PROBE_OFFSET_FROM_EXTRUDER 22 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER", "true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set", "// Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe", "4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a", "2) // Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** * Z probes", "offset: -below +above [the nozzle] // X and Y axis travel speed (mm/m)", "// :{ 0:'Low', 1:'High' } #define X_ENABLE_ON 0 #define Y_ENABLE_ON 0 #define Z_ENABLE_ON", "pin except Z-Min. * (By default Marlin assumes the Z-Max endstop pin.) ", "/ //#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector. //#define Z_SERVO_ANGLES {70,0}", "//#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define", "probe points to avoid hitting the bed and other hardware. * Servo-mounted probes", "If fewer factors are given than the * total number of extruders, the", "{ 200, 200, 3, 25 } /** * Default Max Acceleration (change/s) change", "switches connect... * - normally-closed switches to GND and D32. * - normally-open", "DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } /** * Default Acceleration (change/s) change", "bed, clamps, ... // Be sure you have this distance over your Z_MAX_POS", "=> 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE", "10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * * +-- BACK ---+ * \| \|", "* \| \| * L \| (+) P \| R <-- probe (20,20)", "Settings * * These settings can be reset by M502 * * Note", "// Enable this option for Toshiba stepper drivers //#define CONFIG_STEPPERS_TOSHIBA // @section extruder", "with M205 X Y Z E * * \"Jerk\" specifies the minimum speed", "uses a Hall effect sensor and emulates a servo. / //#define BLTOUCH #if", "if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR false", "Z Probe to nozzle (X,Y) offset, relative to (0, 0). X and", "true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set", "true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set", "Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy //#define", "is enabled, saved values will override these. / /* * With this option", "// The extra distance the X axis must travel to pickup the sled.", "flowing through the wires). This is likely most useful to users of the", "// Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST //", "EEPROM is enabled, saved values will override these. / /* * With this", "wires). This is likely most useful to users of the * BLTouch probe,", "go up. Any advice? I've definitely done a few searches but haven't solved", "offsets are both positive: * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 ", "probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting Stepper Enable Pins (Active Low) use", "// Defaults to SERVO 0 connector. //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy", "#if ENABLED(BLTOUCH) //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed #endif", "Z_MAX_POS in case. // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1]", "Runout Sensor A mechanical or opto endstop is used to check for", "these. / /* * With this option each E stepper can have its", "is likely most useful to users of the * BLTouch probe, but may", "Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z", "Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. * Only integer values >= 1 are valid", "E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100,", "presence of filament. * RAMPS-based boards use SERVO3_PIN. * For other boards", "/ //#define BLTOUCH #if ENABLED(BLTOUCH) //#define BLTOUCH_DELAY 375 // (ms) Enable and increase", "probing // A probe that is deployed and stowed with a solenoid pin", "// // For Z_PROBE_ALLEN_KEY see the Delta example configurations. // /* * Z", "-1=MIN // :[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR -1 #define Z_HOME_DIR -1 //", "Y Z E * * \"Jerk\" specifies the minimum speed change that requires", "* +-- BACK ---+ * \| \| * L \| (+) P \|", "* RAMPS-based boards use SERVO3_PIN. * For other boards you may need to", "can be reset by M502 * * Note that if EEPROM is enabled,", "2.0 //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== // @section probes // //", "Z, E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_FEEDRATE { 200, 200,", "Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.", "ENABLED(BLTOUCH) //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed #endif /", "free endstop connector. - Use 5V for powered (usually inductive) sensors. ", "arm. / //#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector. //#define Z_SERVO_ANGLES", "* \| \| * O-- FRONT --+ * (0,0) / #define X_PROBE_OFFSET_FROM_EXTRUDER 22", "and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for", "i3 MK2 clone and have run into a problem with the Z-axis motors.", "endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will be", "(X,Y) offset, relative to (0, 0). X and Y offsets must be", "probe connected to any pin except Z-Min. * (By default Marlin assumes the", "// This will remove the need to poll the interrupt pins, saving many", "test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting Stepper Enable Pins", "Probe pin, set Z_MIN_PROBE_PIN below. * * - The simplest option is to", "* With this option each E stepper can have its own factors for", "\| * L \| (+) P \| R <-- probe (20,20) * E", "try to move it up. `M119` shows all endstops open. Min software stops", "done a few searches but haven't solved the problem. `Config.h` is as follows", "E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts", "\"Jerk\" specifies the minimum speed change that requires acceleration. * When changing speed", "endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of", "nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER", "the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //============================== Movement Settings", "use Auto Bed Leveling below. / /* * The \"Manual Probe\" provides a", "* These settings can be reset by M502 * * Note that if", "the Z-axis will move down (and trigger the endstop) but it will only", "A sled-mounted probe like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET", "* - normally-closed switches to GND and D32. * - normally-open switches to", "1.1.3 with a RAMPS 1.4. Both motors turn and I've even uncoupled the", "Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. * You must activate one of these to", "Acceleration (change/s) change = mm/s * Override with M204 * * M204 P", "point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. / //#define", "Use these settings to specify the distance (mm) to raise the probe (or", "Z height at each point with movement commands or (with LCD_BED_LEVELING) the", "interrupt-capable. // This will remove the need to poll the interrupt pins, saving", "// (ms) Enable and increase if needed #endif /** * Enable if probing", "\| (+) P \| R <-- probe (20,20) * E \| \| I", "settings. If fewer factors are given than the * total number of extruders,", "MAX_POS in response to movement commands. //#define MAX_SOFTWARE_ENDSTOPS /** * Filament Runout Sensor", "10.0 #define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 2.0 //=========================================================================== //============================= Z", "/ #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /* * Z_MIN_PROBE_ENDSTOP * * Enable this option for a", "if all enabled endstop pins are interrupt-capable. // This will remove the need", "and D32. * * WARNING: Setting the wrong pin may have unexpected and", "to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to", "cycles. //#define ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //============================== Movement Settings ============================ //============================================================================= // @section motion /*", "off there is a chance of losing position accuracy! #define DISABLE_X false #define", "that are connected to any endstop or probe. // Almost all printers will", "set to true to invert the logic of the probe. // Enable this", "M203 X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] / #define", "E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_FEEDRATE { 200, 200, 3, 25 }", "X_PROBE_OFFSET_FROM_EXTRUDER 22 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12", "values will override these. / /* * With this option each E stepper", "#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if", "Y offsets must be integers. * * In the following example the X", "inductive) sensors. * * - RAMPS 1.3/1.4 boards may use the 5V, GND,", "not being used. // WARNING: When motors turn off there is a chance", "endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of", "// /** * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * * Enable this option for a probe connected", "- RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: ", "this option each E stepper can have its own factors for the ", "fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined //#define", "probes require clearance when deploying, stowing, and moving between * probe points to", "For Z_PROBE_ALLEN_KEY see the Delta example configurations. // /** * Z Probe to", "to move it up. `M119` shows all endstops open. Min software stops are", "Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. ", "Per Unit (steps/mm) Override with M92 * X, Y, Z, E0 [,", "Delta example configurations. // /** * Z Probe to nozzle (X,Y) offset, relative", "* * +-- BACK ---+ * \| \| * L \| (+) P", "(in mm) Minimal z height before homing (G28) for Z clearance above the", "* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_AXIS_STEPS_PER_UNIT", "the arm to rotate. Inductive probes need space to keep from triggering", "M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting Stepper", "X and Y offsets must be integers. * * In the following example", "#define DISABLE_Z false // Warn on display about possibly reduced accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING", "fewer factors are given than the * total number of extruders, the last", "axes won't move above MAX_POS in response to movement commands. //#define MAX_SOFTWARE_ENDSTOPS /*", "//#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical", "// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)", "the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR false #define INVERT_Z_DIR false //", "(with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Speed for the \"accurate\" probe of each", "Leveling below. / /** * The \"Manual Probe\" provides a means to do", "endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of", "E1[, E2[, E3[, E4]]]] / #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 4000, 120 }", "Specifically, the Z-axis will move down (and trigger the endstop) but it will", "direction in software and they also only go up. Any advice? I've definitely", "are both positive: #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * ", "the following movement settings. If fewer factors are given than the ", "H \| (-) \| T * \| \| * O-- FRONT --+", "firmware assumes HIGH = has filament, LOW = ran out / //#define FILAMENT_RUNOUT_SENSOR", "Jerk (mm/s) Override with M205 X Y Z E * * \"Jerk\"", "endstop pin.) * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below.", "use 1 // :{ 0:'Low', 1:'High' } #define X_ENABLE_ON 0 #define Y_ENABLE_ON 0", "ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN", "and Aux4->D32 pin: * - For simple switches connect... * - normally-closed switches", "speed (mm/m) between probes #define XY_PROBE_SPEED 8000 // Speed for the first approach", "probe like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 //", "//#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with COM to", "Default Jerk (mm/s) * Override with M205 X Y Z E * ", "the entire X-axis carriage. Additional test: reversed the z-axis motor wires and they", " BLTouch probe, but may also help those with inductive or other probe", "up. `M119` shows all endstops open. Min software stops are currently disabled, as", "Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN Z_MAX_PIN /** * Probe Type * * Allen Key Probes,", "// set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING", "out / //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true", "the build of a i3 MK2 clone and have run into a problem", "I try to move it up. `M119` shows all endstops open. Min software", "resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will be ignored if", "Probe to nozzle (X,Y) offset, relative to (0, 0). X and Y", "the Z Min endstop pin. / #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /* * Z_MIN_PROBE_ENDSTOP * ", "will be disabled during probing so as to minimize potential EM interference", "I'm near the end of the build of a i3 MK2 clone and", "value applies to the rest. / //#define DISTINCT_E_FACTORS /* * Default Axis Steps", "goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR false #define INVERT_Z_DIR false", "#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the", "//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for", "Enable if probing seems unreliable. Heaters and/or fans - consistent with the ", "// Z Clearance between probe points // For M851 give a range for", "// X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y", "caution and do your homework. / //#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN Z_MAX_PIN /", "between probe points // For M851 give a range for adjusting the Z", "true // Keep only the active extruder enabled. // @section machine // Invert", "// at the start of the line) to disable the endstop pullup resistors", "extruders, the last value applies to the rest. / //#define DISTINCT_E_FACTORS /** ", "375 // (ms) Enable and increase if needed #endif /* * Enable if", "nozzle. / #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5", "Endstop Settings =========================== //=========================================================================== // @section homing // Specify here all the endstop", "to users of the BLTouch probe, but may also help those with", "probes need space to keep from triggering early. * * Use these settings", "homing // Specify here all the endstop connectors that are connected to any", "but haven't solved the problem. `Config.h` is as follows (clipped due to posting", "this distance over your Z_MAX_POS in case. // Direction of endstops when homing;", "quieting/silencing the source of the 'noise' (the change * in current flowing through", "about possibly reduced accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING // @section extruder #define DISABLE_E false //", "axis must travel to pickup the sled. 0 should be fine but you", "use a free endstop connector. * - Use 5V for powered (usually inductive)", "a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851", "/** * Default Settings * * These settings can be reset by M502", "M204 * * M204 P Acceleration * M204 R Retract Acceleration * M204", "Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.", "X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * * +-- BACK ---+ * \|", "// set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING", "#define DISABLE_Y false #define DISABLE_Z false // Warn on display about possibly reduced", "Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z,", "with a RAMPS 1.4. Both motors turn and I've even uncoupled the entire", "connector. * - Use 5V for powered (usually inductive) sensors. * * -", "way. #define INVERT_X_DIR false #define INVERT_Y_DIR false #define INVERT_Z_DIR false // Enable this", "if needed #endif /** * Enable if probing seems unreliable. Heaters and/or fans", "// Z offset: -below +above [the nozzle] // X and Y axis travel", "carriage. Additional test: reversed the z-axis motor wires and they only go up.", "unexpected and potentially * disastrous consequences. Use with caution and do your homework.", "to keep from triggering early. * * Use these settings to specify the", "the end of the build of a i3 MK2 clone and have run", "// @section probes // // See http://marlinfw.org/configuration/probes.html // /** * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * ", "COM to ground and NC to Signal uses \"false\" here (most common setup).", "of a i3 MK2 clone and have run into a problem with the", "for Z clearance above the bed, clamps, ... // Be sure you have", "setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of", "use the 5V, GND, and Aux4->D32 pin: - For simple switches connect...", "that if EEPROM is enabled, saved values will override these. / /* ", "probe (or lower the bed). The values set here apply over and", "false // set to true to invert the logic of the endstop. #define", "and they only go up. Inverted the motor direction in software and they", "* following movement settings. If fewer factors are given than the * total", "nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] // X", "this option for Toshiba stepper drivers //#define CONFIG_STEPPERS_TOSHIBA // @section extruder // For", "offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y offset: -front", "Heaters and/or fans - consistent with the * options selected below - will", "#define Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0", "#define E_ENABLE_ON 0 // For all extruders // Disables axis stepper immediately when", "the firmware assumes HIGH = has filament, LOW = ran out / //#define", "//#define USE_ZMAX_PLUG // coarse Endstop Settings //#define ENDSTOPPULLUPS // Comment this out (using", "#define INVERT_E3_DIR false #define INVERT_E4_DIR false // @section homing //#define Z_HOMING_HEIGHT 4 //", "motor direction in software and they also only go up. Any advice? I've", "if probing seems unreliable. Heaters and/or fans - consistent with the options", "to invert the logic of the sensor. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use", "motor wires and they only go up. Inverted the motor direction in software", "4000, 120 } /** * Default Max Feed Rate (mm/s) * Override with", "Hall effect sensor and emulates a servo. / //#define BLTOUCH #if ENABLED(BLTOUCH) //#define", "and above any (negative) probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or", "to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //==============================", "//#define CONFIG_STEPPERS_TOSHIBA // @section extruder // For direct drive extruder v9 set to", "0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS 230 #define Y_MAX_POS 200", "* probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. * Only", "the z-axis motor wires and they only go up. Inverted the motor direction", "distance over your Z_MAX_POS in case. // Direction of endstops when homing; 1=MAX,", "@section extruder #define DISABLE_E false // For all extruders #define DISABLE_INACTIVE_EXTRUDER true //", "Steps Per Unit (steps/mm) * Override with M92 * X, Y, Z, E0", "use 0, Non Inverting (Active High) use 1 // :{ 0:'Low', 1:'High' }", "to minimize * potential EM interference by quieting/silencing the source of the 'noise'", "designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance", "#define Z_ENABLE_ON 0 #define E_ENABLE_ON 0 // For all extruders // Disables axis", "to posting restrictions): ``` //=========================================================================== //============================== Endstop Settings =========================== //=========================================================================== // @section homing", "D32. * - normally-open switches to 5V and D32. * * WARNING: Setting", "over your Z_MAX_POS in case. // Direction of endstops when homing; 1=MAX, -1=MIN", "} #define X_ENABLE_ON 0 #define Y_ENABLE_ON 0 #define Z_ENABLE_ON 0 #define E_ENABLE_ON 0", "#define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // coarse Endstop Settings //#define", "is used to check for the presence of filament. * * RAMPS-based boards", "Only integer values >= 1 are valid here. * * Example: `M851 Z-5`", "space to keep from triggering early. * * Use these settings to specify", "false // Warn on display about possibly reduced accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING // @section", "/** * Default Max Acceleration (change/s) change = mm/s * (Maximum start speed", "If enabled, axes won't move above MAX_POS in response to movement commands. //#define", "(Active High) use 1 // :{ 0:'Low', 1:'High' } #define X_ENABLE_ON 0 #define", "When motors turn off there is a chance of losing position accuracy! #define", "0 should be fine but you can push it further if you'd like.", "Z-Min. * (By default Marlin assumes the Z-Max endstop pin.) * To use", "Z_ENABLE_ON 0 #define E_ENABLE_ON 0 // For all extruders // Disables axis stepper", "#define X_ENABLE_ON 0 #define Y_ENABLE_ON 0 #define Z_ENABLE_ON 0 #define E_ENABLE_ON 0 //", "used. // WARNING: When motors turn off there is a chance of losing", "deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE // A sled-mounted", "a chance of losing position accuracy! #define DISABLE_X false #define DISABLE_Y false #define", "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /** * Z_MIN_PROBE_ENDSTOP * * Enable this option for a probe connected", "deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based", "and Y offsets must be integers. * * In the following example the", "(change/s) change = mm/s * (Maximum start speed for accelerated moves) * Override", "* * These settings can be reset by M502 * * Note that", "likely most useful to users of the * BLTouch probe, but may also", "WARNING: When motors turn off there is a chance of losing position accuracy!", "movement settings. If fewer factors are given than the * total number of", "Travel limits after homing (units are in mm) #define X_MIN_POS 0 #define Y_MIN_POS", "// Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1", "- normally-open switches to 5V and D32. * * WARNING: Setting the wrong", "Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. * You must activate one of", "ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with COM to ground and NC to Signal", "invert the logic of the sensor. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal", "angles /** * The BLTouch probe uses a Hall effect sensor and emulates", "here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm", "Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles /** * The BLTouch", "define FIL_RUNOUT_PIN. * By default the firmware assumes HIGH = has filament, LOW", "with a CLEARANCE of 4 => 9mm from bed to nozzle. * But:", "when probing //#define PROBING_FANS_OFF // Turn fans off when probing // A probe", "of the // extra connectors. Leave undefined any used for non-endstop and non-probe", "* Note that if EEPROM is enabled, saved values will override these. /", "// For direct drive extruder v9 set to true, for geared extruder set", "Max Feed Rate (mm/s) Override with M203 * X, Y, Z, E0", "- will be disabled during probing so as to minimize * potential EM", "to the rest. / //#define DISTINCT_E_FACTORS /* * Default Axis Steps Per Unit", "following example the X and Y offsets are both positive: * #define X_PROBE_OFFSET_FROM_EXTRUDER", "happen instantaneously. / #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.4 #define", " options selected below - will be disabled during probing so as to", "USE_ZMAX_PLUG // coarse Endstop Settings //#define ENDSTOPPULLUPS // Comment this out (using //", "distance (mm) to raise the probe (or * lower the bed). The values", "connect... * - normally-closed switches to GND and D32. * - normally-open switches", "true // set to true to invert the logic of the endstop. #define", "Z_MAX_PIN /** * Probe Type * * Allen Key Probes, Servo Probes, Z-Sled", "For other boards you may need to define FIL_RUNOUT_PIN. * By default the", "EM interference by quieting/silencing the source of the 'noise' (the change * in", "positive: * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * * +-- BACK", "useful to users of the * BLTouch probe, but may also help those", "or opto endstop is used to check for the presence of filament. ", "homing (units are in mm) #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS", "//=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== // @section probes // // See", "probes require extra space for the arm to rotate. Inductive probes need", "of losing position accuracy! #define DISABLE_X false #define DISABLE_Y false #define DISABLE_Z false", "the following example the X and Y offsets are both positive: * #define", "* * M204 P Acceleration * M204 R Retract Acceleration * M204 T", "/** * Default Max Feed Rate (mm/s) * Override with M203 * X,", "the wrong pin may have unexpected and potentially * disastrous consequences. Use with", "and have run into a problem with the Z-axis motors. Specifically, the Z-axis", "connector. //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles /** ", "-1 // @section machine // Travel limits after homing (units are in mm)", "DEFAULT_MAX_FEEDRATE { 200, 200, 3, 25 } /* * Default Max Acceleration (change/s)", "is as follows (clipped due to posting restrictions): ``` //=========================================================================== //============================== Endstop Settings", "clearance when deploying, stowing, and moving between * probe points to avoid hitting", "* * Use these settings to specify the distance (mm) to raise the", "your homework. * / //#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN Z_MAX_PIN /* * Probe Type", "(G28) for Z clearance above the bed, clamps, ... // Be sure you", "on display about possibly reduced accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING // @section extruder #define DISABLE_E", "* - The simplest option is to use a free endstop connector. ", "100, 10000 } /* * Default Acceleration (change/s) change = mm/s * Override", "//#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with", "* in current flowing through the wires). This is likely most useful to", "may also help those with inductive or other probe types. / //#define PROBING_HEATERS_OFF", "has filament, LOW = ran out / //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING", "before homing (G28) for Z clearance above the bed, clamps, ... // Be", "#define Z_HOME_DIR -1 // @section machine // Travel limits after homing (units are", "#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the", "'noise' (the change * in current flowing through the wires). This is likely", "[, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_FEEDRATE { 200, 200, 3, 25", " Default Axis Steps Per Unit (steps/mm) * Override with M92 * X,", "software stops are currently disabled, as I try to set the printer up.", "used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define", "INVERT_E4_DIR false // @section homing //#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z", "minimize * potential EM interference by quieting/silencing the source of the 'noise' (the", "\| G <-- nozzle (10,10) * T \| \| H * \| (-)", "* When changing speed and direction, if the difference is less than the", "M851, or the LCD. * Only integer values >= 1 are valid here.", "interference by quieting/silencing the source of the 'noise' (the change * in current", "MAX_SOFTWARE_ENDSTOPS /** * Filament Runout Sensor * A mechanical or opto endstop is", "when probing // A probe that is deployed and stowed with a solenoid", "movement commands * or (with LCD_BED_LEVELING) the LCD controller. / //#define PROBE_MANUALLY /", "// See http://marlinfw.org/configuration/probes.html // /* * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * * Enable this option for", "Minimal z height before homing (G28) for Z clearance above the bed, clamps,", "the sensor. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout", "0 // Defaults to SERVO 0 connector. //#define Z_SERVO_ANGLES {70,0} // Z Servo", "// Disables axis stepper immediately when it's not being used. // WARNING: When", "Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1", "-1 #define Z_HOME_DIR -1 // @section machine // Travel limits after homing (units", "fans - consistent with the * options selected below - will be disabled", "X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.", "to use Auto Bed Leveling below. / /* * The \"Manual Probe\" provides", "for the presence of filament. * * RAMPS-based boards use SERVO3_PIN. * For", "that is deployed and stowed with a solenoid pin (SOL1_PIN) //#define SOLENOID_PROBE //", "endstops open. Min software stops are currently disabled, as I try to set", "can push it further if you'd like. // // For Z_PROBE_ALLEN_KEY see the", "acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define", "factors are given than the * total number of extruders, the last value", "* Use these settings to specify the distance (mm) to raise the probe", "Signal uses \"false\" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to", "see the Delta example configurations. // /** * Z Probe to nozzle (X,Y)", "DISABLE_X false #define DISABLE_Y false #define DISABLE_Z false // Warn on display about", "acceleration. * When changing speed and direction, if the difference is less than", "set Z_MIN_PROBE_PIN below. * * - The simplest option is to use a", "logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert", "will be using one per axis. Probes will use one or more of", "this out (using // at the start of the line) to disable the", "0, Non Inverting (Active High) use 1 // :{ 0:'Low', 1:'High' } #define", "to any pin except Z-Min. * (By default Marlin assumes the Z-Max endstop", "BACK ---+ * \| \| * L \| (+) P \| R <--", "sensors. * * - RAMPS 1.3/1.4 boards may use the 5V, GND, and", "Z-axis motors. Specifically, the Z-axis will move down (and trigger the endstop) but", "/** * Z_MIN_PROBE_ENDSTOP * * Enable this option for a probe connected to", "possibly reduced accuracy //#define DISABLE_REDUCED_ACCURACY_WARNING // @section extruder #define DISABLE_E false // For", "is less than the * value set here, it may happen instantaneously. /", " (e.g., an inductive probe or a nozzle-based probe-switch.) / #define FIX_MOUNTED_PROBE /", "} /* * Default Max Acceleration (change/s) change = mm/s * (Maximum start", "stepper immediately when it's not being used. // WARNING: When motors turn off", "if the difference is less than the * value set here, it may", "the problem. `Config.h` is as follows (clipped due to posting restrictions): ``` //===========================================================================", "(negative) * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. ", "//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to", "=> 2mm from bed to nozzle. / #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance", "shows all endstops open. Min software stops are currently disabled, as I try", "Disables axis stepper immediately when it's not being used. // WARNING: When motors", "false #define INVERT_E4_DIR false // @section homing //#define Z_HOMING_HEIGHT 4 // (in mm)", "filament. * * RAMPS-based boards use SERVO3_PIN. * For other boards you may", "will use one or more of the // extra connectors. Leave undefined any", "emulates a servo. / //#define BLTOUCH #if ENABLED(BLTOUCH) //#define BLTOUCH_DELAY 375 // (ms)", "The simplest option is to use a free endstop connector. - Use", "= mm/s * Override with M204 * * M204 P Acceleration * M204", "200 // If enabled, axes won't move below MIN_POS in response to movement", "endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of", "Clearance between probe points // For M851 give a range for adjusting the", "/** * Probe Type * * Allen Key Probes, Servo Probes, Z-Sled Probes,", "reversed the z-axis motor wires and they only go up. Inverted the motor", "* #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 * * +-- BACK ---+ * \| \| ", "endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR -1", "probe. // Enable this feature if all enabled endstop pins are interrupt-capable. //", "@section probes // // See http://marlinfw.org/configuration/probes.html // /* * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * * Enable", "-20 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe", "Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS 230 #define Y_MAX_POS 200 #define Z_MAX_POS", "move below MIN_POS in response to movement commands. //#define MIN_SOFTWARE_ENDSTOPS // If enabled,", "... // Be sure you have this distance over your Z_MAX_POS in case.", "SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup", "(or * lower the bed). The values set here apply over and above", "* - Use 5V for powered (usually inductive) sensors. * * - RAMPS", "the difference is less than the * value set here, it may happen", "invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true", "the LCD controller. / //#define PROBE_MANUALLY /* * A Fix-Mounted Probe either doesn't", "\| I * F \| (-) N (+) \| G <-- nozzle (10,10)", "SERVO 0 connector. //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles", "custom Z Probe pin, set Z_MIN_PROBE_PIN below. * * - The simplest option", "the distance (mm) to raise the probe (or * lower the bed). The", "the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to", "* Enable if probing seems unreliable. Heaters and/or fans - consistent with the", "* value set here, it may happen instantaneously. / #define DEFAULT_XJERK 10.0 #define", "SOLENOID_PROBE // A sled-mounted probe like those designed by Charles Bell. //#define Z_PROBE_SLED", "and Stow angles /* * The BLTouch probe uses a Hall effect sensor", "Default Axis Steps Per Unit (steps/mm) * Override with M92 * X, Y,", "Y_HOME_DIR -1 #define Z_HOME_DIR -1 // @section machine // Travel limits after homing", "boards use SERVO3_PIN. * For other boards you may need to define FIL_RUNOUT_PIN.", "potentially * disastrous consequences. Use with caution and do your homework. * /", "#define DEFAULT_MAX_FEEDRATE { 200, 200, 3, 25 } /* * Default Max Acceleration", "Z acceleration for travel (non printing) moves /** * Default Jerk (mm/s) ", "the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the", "the logic of the sensor. #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup", "line) to disable the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings:", "25 } /* * Default Max Acceleration (change/s) change = mm/s * (Maximum", "Additional test: reversed the z-axis motor wires and they only go up. Inverted", "Use with caution and do your homework. * / //#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN", "(By default Marlin assumes the Z-Max endstop pin.) To use a custom", "the \"accurate\" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // Use", "Marlin assumes the Z-Max endstop pin.) * To use a custom Z Probe", "the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic", "* Override with M92 * X, Y, Z, E0 [, E1[, E2[, E3[,", "* * RAMPS-based boards use SERVO3_PIN. * For other boards you may need", "true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set", ">= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE", "Be sure you have this distance over your Z_MAX_POS in case. // Direction", "manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) / #define", "L \| (+) P \| R <-- probe (20,20) E \| \|", "go up. Inverted the motor direction in software and they also only go", "/ 2) // Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** * Z", "#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // Use double touch for probing //#define PROBE_DOUBLE_TOUCH", "due to posting restrictions): ``` //=========================================================================== //============================== Endstop Settings =========================== //=========================================================================== // @section", "Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** * Z probes require clearance", "http://marlinfw.org/configuration/probes.html // /** * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * * Enable this option for a probe", "R <-- probe (20,20) * E \| \| I * F \| (-)", "* Servo-mounted probes require extra space for the arm to rotate. * Inductive", "* Override with M205 X Y Z E * * \"Jerk\" specifies the", "is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define", "have unexpected and potentially * disastrous consequences. Use with caution and do your", "0 #define X_MAX_POS 230 #define Y_MAX_POS 200 #define Z_MAX_POS 200 // If enabled,", "* Use G29 repeatedly, adjusting the Z height at each point with movement", "//#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with COM to ground and", "<-- probe (20,20) * E \| \| I * F \| (-) N", "CONFIG_STEPPERS_TOSHIBA // @section extruder // For direct drive extruder v9 set to true,", "override these. / /* * With this option each E stepper can have", "#define X_HOME_DIR -1 #define Y_HOME_DIR -1 #define Z_HOME_DIR -1 // @section machine //", "into a problem with the Z-axis motors. Specifically, the Z-axis will move down", "X_ENABLE_ON 0 #define Y_ENABLE_ON 0 #define Z_ENABLE_ON 0 #define E_ENABLE_ON 0 // For", "// @section motion /** * Default Settings * * These settings can be", "M204 P Acceleration * M204 R Retract Acceleration * M204 T Travel Acceleration", "the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to", "RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: * -", "#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 4000, 120 } /** * Default Max Feed", "#define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 2.0 //===========================================================================", "// set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING", "// coarse Endstop Settings //#define ENDSTOPPULLUPS // Comment this out (using // at", "#define DEFAULT_EJERK 2.0 //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== // @section probes", "Marlin 1.1.3 with a RAMPS 1.4. Both motors turn and I've even uncoupled", "//=========================================================================== //============================== Endstop Settings =========================== //=========================================================================== // @section homing // Specify here all", "} /** * Default Acceleration (change/s) change = mm/s * Override with M204", "Aux4->D32 pin: * - For simple switches connect... * - normally-closed switches to", "Settings ============================ //============================================================================= // @section motion /** * Default Settings * * These", "Setting the wrong pin may have unexpected and potentially * disastrous consequences. Use", "#define INVERT_X_DIR false #define INVERT_Y_DIR false #define INVERT_Z_DIR false // Enable this option", "// @section extruder // For direct drive extruder v9 set to true, for", "//#define BLTOUCH #if ENABLED(BLTOUCH) //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if", "- consistent with the * options selected below - will be disabled during", "a means to do \"Auto\" Bed Leveling without a probe. * Use G29", "= mm/s * (Maximum start speed for accelerated moves) * Override with M201", "// @section machine // Travel limits after homing (units are in mm) #define", "-1 #define Y_HOME_DIR -1 #define Z_HOME_DIR -1 // @section machine // Travel limits", "internal pullup for filament runout pins if the sensor is defined. #define FILAMENT_RUNOUT_SCRIPT", "there is a chance of losing position accuracy! #define DISABLE_X false #define DISABLE_Y", "E_ENABLE_ON 0 // For all extruders // Disables axis stepper immediately when it's", "- Use 5V for powered (usually inductive) sensors. * * - RAMPS 1.3/1.4", "//#define ENDSTOP_INTERRUPTS_FEATURE //============================================================================= //============================== Movement Settings ============================ //============================================================================= // @section motion /** ", "one per axis. Probes will use one or more of the // extra", "means to do \"Auto\" Bed Leveling without a probe. Use G29 repeatedly,", "an inductive probe or a nozzle-based probe-switch.) / #define FIX_MOUNTED_PROBE /* * Z", "BLTouch probe, but may also help those with inductive or other probe types.", "20 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST", "Z_PROBE_ALLEN_KEY see the Delta example configurations. // /** * Z Probe to nozzle", "potential EM interference by quieting/silencing the source of the 'noise' (the change ", "[, E1[, E2[, E3[, E4]]]] / #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 4000, 120", "machine // Travel limits after homing (units are in mm) #define X_MIN_POS 0", "/** * Z Servo Probe, such as an endstop switch on a rotating", "check for the presence of filament. * * RAMPS-based boards use SERVO3_PIN. ", "/ #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 2.0", "disastrous consequences. Use with caution and do your homework. * / //#define Z_MIN_PROBE_ENDSTOP", "Z_MIN_PROBE_ENDSTOP * Enable this option for a probe connected to any pin", "default the firmware assumes HIGH = has filament, LOW = ran out /", "bed to nozzle. But: `M851 Z+1` with a CLEARANCE of 2 =>", "except Z-Min. * (By default Marlin assumes the Z-Max endstop pin.) * To", "M204 R Retract Acceleration * M204 T Travel Acceleration / #define DEFAULT_ACCELERATION 3000", "FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.", "0). X and Y offsets must be integers. * * In the", "Acceleration (change/s) change = mm/s * (Maximum start speed for accelerated moves) ", "posting restrictions): ``` //=========================================================================== //============================== Endstop Settings =========================== //=========================================================================== // @section homing //", "// Travel limits after homing (units are in mm) #define X_MIN_POS 0 #define", "//#define DISTINCT_E_FACTORS /* * Default Axis Steps Per Unit (steps/mm) * Override with", "#define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 2.0 //=========================================================================== //============================= Z Probe Options ============================= //===========================================================================", "* Default Acceleration (change/s) change = mm/s * Override with M204 * ", "the bed and other hardware. Servo-mounted probes require extra space for the", "USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // coarse Endstop Settings //#define ENDSTOPPULLUPS", "RAMPS 1.4. Both motors turn and I've even uncoupled the entire X-axis carriage.", "+-- BACK ---+ * \| \| * L \| (+) P \| R", "stepper can have its own factors for the * following movement settings. If", "5V for powered (usually inductive) sensors. * * - RAMPS 1.3/1.4 boards may", "won't move below MIN_POS in response to movement commands. //#define MIN_SOFTWARE_ENDSTOPS // If", "connected to any endstop or probe. // Almost all printers will be using", "connectors that are connected to any endstop or probe. // Almost all printers", "moving between * probe points to avoid hitting the bed and other hardware.", "Specify here all the endstop connectors that are connected to any endstop or", "- The simplest option is to use a free endstop connector. * -", "false #define INVERT_E3_DIR false #define INVERT_E4_DIR false // @section homing //#define Z_HOMING_HEIGHT 4", "to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false //", "need to define FIL_RUNOUT_PIN. * By default the firmware assumes HIGH = has", "[of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y offset: -front +behind [the nozzle]", "inductive or other probe types. / //#define PROBING_HEATERS_OFF // Turn heaters off when", "direction. Change (or reverse the motor connector) if an axis goes the wrong", "boards may use the 5V, GND, and Aux4->D32 pin: - For simple", "See http://marlinfw.org/configuration/probes.html // /** * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * * Enable this option for a", "you may need to define FIL_RUNOUT_PIN. * By default the firmware assumes HIGH", "early. * * Use these settings to specify the distance (mm) to raise", "endstop switch on a rotating arm. / //#define Z_ENDSTOP_SERVO_NR 0 // Defaults to", "//#define PROBING_FANS_OFF // Turn fans off when probing // A probe that is", "(and trigger the endstop) but it will only make a quick noise if", "X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y offset:", "as follows (clipped due to posting restrictions): ``` //=========================================================================== //============================== Endstop Settings ===========================", "a probe connected to any pin except Z-Min. (By default Marlin assumes", "Y_PROBE_OFFSET_FROM_EXTRUDER 12 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 //", "Servo Probe, such as an endstop switch on a rotating arm. / //#define", "+above [the nozzle] // X and Y axis travel speed (mm/m) between probes", "// set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING", "the options selected below - will be disabled during probing so as", "DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 2.0 //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== //", "* By default the firmware assumes HIGH = has filament, LOW = ran", "// set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING", "all enabled endstop pins are interrupt-capable. // This will remove the need to", "0:'Low', 1:'High' } #define X_ENABLE_ON 0 #define Y_ENABLE_ON 0 #define Z_ENABLE_ON 0 #define", "points // For M851 give a range for adjusting the Z probe offset", "the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE", "instantaneously. / #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK", "/ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to", "DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves /", "enabled endstop pins are interrupt-capable. // This will remove the need to poll", "will only make a quick noise if I try to move it up.", "/ * Z probes require clearance when deploying, stowing, and moving between ", "arm to rotate. Inductive probes need space to keep from triggering early.", "switches to 5V and D32. * * WARNING: Setting the wrong pin may", "set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. * Only integer values >= 1", "DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 4000, 120 } /** * Default Max Feed Rate", "#define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false //", "* E \| \| I * F \| (-) N (+) \| G", "Min software stops are currently disabled, as I try to set the printer", "of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the", "for filament runout pins if the sensor is defined. #define FILAMENT_RUNOUT_SCRIPT \"M600\" #endif", "acceleration for travel (non printing) moves /** * Default Jerk (mm/s) * Override", "axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR false #define INVERT_Z_DIR", "less than the * value set here, it may happen instantaneously. / #define", " O-- FRONT --+ * (0,0) / #define X_PROBE_OFFSET_FROM_EXTRUDER 22 // X offset:", "// Invert the stepper direction. Change (or reverse the motor connector) if an", "with the options selected below - will be disabled during probing so", "end of the build of a i3 MK2 clone and have run into", "and direction, if the difference is less than the * value set here,", "wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR false #define INVERT_Z_DIR false // Enable", "here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert", "activate one of these to use Auto Bed Leveling below. / /* ", "switch on a rotating arm. / //#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO", "Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. * Only integer values >=", "T Travel Acceleration / #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E", "G <-- nozzle (10,10) T \| \| H * \| (-) \|", "offsets must be integers. * * In the following example the X and", "120 } /** * Default Max Feed Rate (mm/s) * Override with M203", "bed to nozzle. / #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define", "Travel Acceleration / #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration", "clamps, ... // Be sure you have this distance over your Z_MAX_POS in", "BLTOUCH_DELAY 375 // (ms) Enable and increase if needed #endif /** * Enable", "I try to set the printer up. Using Marlin 1.1.3 with a RAMPS", "enabled, axes won't move above MAX_POS in response to movement commands. //#define MAX_SOFTWARE_ENDSTOPS", "(20,20) * E \| \| I * F \| (-) N (+) \|", "set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true", "extra space for the arm to rotate. * Inductive probes need space to", "#define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS 230 #define Y_MAX_POS 200 #define", "active extruder enabled. // @section machine // Invert the stepper direction. Change (or", "increase if needed #endif /** * Enable if probing seems unreliable. Heaters and/or", "test: reversed the z-axis motor wires and they only go up. Inverted the", "reset by M502 * * Note that if EEPROM is enabled, saved values", "{ 3000, 3000, 100, 10000 } /** * Default Acceleration (change/s) change =", "(most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the", "problem with the Z-axis motors. Specifically, the Z-axis will move down (and trigger", "//============================================================================= // @section motion /** * Default Settings * * These settings can", "this option for a probe connected to any pin except Z-Min. * (By", "when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Speed for the \"accurate\" probe", "#define INVERT_E0_DIR false #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define", "/** * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN * * Enable this option for a probe connected to", "homework. * / //#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN Z_MAX_PIN /* * Probe Type ", "here all the endstop connectors that are connected to any endstop or probe.", "wires and they only go up. Inverted the motor direction in software and", " Default Settings * * These settings can be reset by M502 ", "may have unexpected and potentially disastrous consequences. Use with caution and do", "Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. * You must activate one", "commands. //#define MIN_SOFTWARE_ENDSTOPS // If enabled, axes won't move above MAX_POS in response", "T * \| \| * O-- FRONT --+ * (0,0) / #define X_PROBE_OFFSET_FROM_EXTRUDER", "endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of", "below. * - The simplest option is to use a free endstop", "or a nozzle-based probe-switch.) / #define FIX_MOUNTED_PROBE /* * Z Servo Probe, such", "the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will", "to the Z Min endstop pin. / #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /* * Z_MIN_PROBE_ENDSTOP ", "Z_MIN_PROBE_PIN Z_MAX_PIN /* * Probe Type * * Allen Key Probes, Servo Probes,", "and emulates a servo. / //#define BLTOUCH #if ENABLED(BLTOUCH) //#define BLTOUCH_DELAY 375 //", "// @section extruder #define DISABLE_E false // For all extruders #define DISABLE_INACTIVE_EXTRUDER true", "in response to movement commands. //#define MIN_SOFTWARE_ENDSTOPS // If enabled, axes won't move", "\"accurate\" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // Use double", "in current flowing through the wires). This is likely most useful to users", "BLTOUCH #if ENABLED(BLTOUCH) //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed", "in response to movement commands. //#define MAX_SOFTWARE_ENDSTOPS /* * Filament Runout Sensor ", "1.4. Both motors turn and I've even uncoupled the entire X-axis carriage. Additional", "E0 [, E1[, E2[, E3[, E4]]]] / #define DEFAULT_MAX_FEEDRATE { 200, 200, 3,", "Override with M201 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]", "the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic", "of the probe. // Enable this feature if all enabled endstop pins are", "* * Enable this option for a probe connected to any pin except", "Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z //", "//#define PROBING_HEATERS_OFF // Turn heaters off when probing //#define PROBING_FANS_OFF // Turn fans", "extruder set to false. #define INVERT_E0_DIR false #define INVERT_E1_DIR false #define INVERT_E2_DIR false", "X_MAX_POS 230 #define Y_MAX_POS 200 #define Z_MAX_POS 200 // If enabled, axes won't", "Options ============================= //=========================================================================== // @section probes // // See http://marlinfw.org/configuration/probes.html // /** ", "the Delta example configurations. // /* * Z Probe to nozzle (X,Y) offset," ]
[ "run it through a small hole from the top? * Any tips for", "small hole from the top? * Any tips for making it especially noise", "I would do it mainly for noise cancelling, because I have to run", "etc., for example for ABS. * What do I have to pay attention", "because I have to run it in my room. I however want to", "however want to have the possibility to upgrade it later with, say, an", "printing PLA, I would do it mainly for noise cancelling, because I have", "hole from the top? * Any tips for making it especially noise cancelling?", "to pay attention to? * Do I need ventilation slits? * Would you", "pay attention to? * Do I need ventilation slits? * Would you put", "through a small hole from the top? * Any tips for making it", "A8 and want to build an enclosure for it. Since I'm currently only", "* Do I need ventilation slits? * Would you put the filament inside", "the top? * Any tips for making it especially noise cancelling? * Is", "possibility to upgrade it later with, say, an air filter etc., for example", "have to run it in my room. I however want to have the", "and want to build an enclosure for it. Since I'm currently only printing", "it in my room. I however want to have the possibility to upgrade", "have the possibility to upgrade it later with, say, an air filter etc.,", "run it in my room. I however want to have the possibility to", "or run it through a small hole from the top? * Any tips", "I have to run it in my room. I however want to have", "I however want to have the possibility to upgrade it later with, say,", "PLA, I would do it mainly for noise cancelling, because I have to", "I have to pay attention to? * Do I need ventilation slits? ", "you put the filament inside or run it through a small hole from", "enclosure for it. Since I'm currently only printing PLA, I would do it", "top? Any tips for making it especially noise cancelling? * Is wood", "to build an enclosure for it. Since I'm currently only printing PLA, I", "* Any tips for making it especially noise cancelling? * Is wood the", "slits? * Would you put the filament inside or run it through a", "to run it in my room. I however want to have the possibility", "put the filament inside or run it through a small hole from the", "upgrade it later with, say, an air filter etc., for example for ABS.", "in my room. I however want to have the possibility to upgrade it", "to? * Do I need ventilation slits? * Would you put the filament", "build an enclosure for it. Since I'm currently only printing PLA, I would", "room. I however want to have the possibility to upgrade it later with,", "to upgrade it later with, say, an air filter etc., for example for", "the possibility to upgrade it later with, say, an air filter etc., for", "to have the possibility to upgrade it later with, say, an air filter", "for example for ABS. * What do I have to pay attention to?", "tips for making it especially noise cancelling? * Is wood the right material?", "an Anet A8 and want to build an enclosure for it. Since I'm", "example for ABS. * What do I have to pay attention to? ", "for it. Since I'm currently only printing PLA, I would do it mainly", "would do it mainly for noise cancelling, because I have to run it", "it later with, say, an air filter etc., for example for ABS. ", "Anet A8 and want to build an enclosure for it. Since I'm currently", "do it mainly for noise cancelling, because I have to run it in", "it mainly for noise cancelling, because I have to run it in my", "have to pay attention to? * Do I need ventilation slits? * Would", "the filament inside or run it through a small hole from the top?", "* What do I have to pay attention to? * Do I need", "Do I need ventilation slits? * Would you put the filament inside or", "with, say, an air filter etc., for example for ABS. * What do", "got an Anet A8 and want to build an enclosure for it. Since", "ABS. * What do I have to pay attention to? * Do I", "only printing PLA, I would do it mainly for noise cancelling, because I", "an air filter etc., for example for ABS. * What do I have", "I'm currently only printing PLA, I would do it mainly for noise cancelling,", "Would you put the filament inside or run it through a small hole", "filament inside or run it through a small hole from the top? ", "want to build an enclosure for it. Since I'm currently only printing PLA,", "cancelling, because I have to run it in my room. I however want", "an enclosure for it. Since I'm currently only printing PLA, I would do", "What do I have to pay attention to? Do I need ventilation", "my room. I however want to have the possibility to upgrade it later", "mainly for noise cancelling, because I have to run it in my room.", "say, an air filter etc., for example for ABS. * What do I", "air filter etc., for example for ABS. * What do I have to", "from the top? * Any tips for making it especially noise cancelling? ", "for noise cancelling, because I have to run it in my room. I", "ventilation slits? Would you put the filament inside or run it through", "I need ventilation slits? * Would you put the filament inside or run", "it through a small hole from the top? * Any tips for making", "inside or run it through a small hole from the top? * Any", "a small hole from the top? * Any tips for making it especially", "currently only printing PLA, I would do it mainly for noise cancelling, because", "filter etc., for example for ABS. * What do I have to pay", "it. Since I'm currently only printing PLA, I would do it mainly for", "later with, say, an air filter etc., for example for ABS. * What", "need ventilation slits? * Would you put the filament inside or run it", "want to have the possibility to upgrade it later with, say, an air", "do I have to pay attention to? * Do I need ventilation slits?", "noise cancelling, because I have to run it in my room. I however", "Since I'm currently only printing PLA, I would do it mainly for noise", "attention to? * Do I need ventilation slits? * Would you put the", "for ABS. * What do I have to pay attention to? * Do", "Any tips for making it especially noise cancelling? * Is wood the right", "* Would you put the filament inside or run it through a small", "I got an Anet A8 and want to build an enclosure for it." ]
[ "firmware on a Melzi board. I would like to share the printer over", "can initiate a print from my computer upstairs 3. I can monitor the", "What do you like most * What do you find most annoying ", " What sort of monitoring is supported? Ex: camera? * What runs the", "sons forgot to disconnect * What sort of monitoring is supported? Ex: camera?", "X3 (i3 Clone) running Repetier firmware on a Melzi board. I would like", "I have (and could use) * A RAMPS board set that I could", "do you want to change * What is the interface (web interface, print", "know: * Are you sharing your printer on a network, and if so,", "Software are you using * What do you like most * What do", "set that I could use to run Marlin. * A Raspberrry Pi 1B", "Ex: To monitor, or still print if my sons forgot to disconnect ", "remotely I have (and could use) A RAMPS board set that I", "(printing, slicing, monitoring, etc.) * Can two computers access it at the same", "Hardware and Software are you using * What do you like most ", "to change What is the interface (web interface, print driver, etc.) ", "to share the printer over my home network so that: 1. Both my", "To monitor, or still print if my sons forgot to disconnect What", "1B * An idle laptop I (might) be willing to use What I", "can monitor the print progress remotely I have (and could use) * A", "you like most * What do you find most annoying * What do", "find most annoying * What do you want to change * What is", "* What Hardware and Software are you using * What do you like", "interface (web interface, print driver, etc.) * What services are provided (printing, slicing,", "of monitoring is supported? Ex: camera? * What runs the print job (G-code)", "so that: 1. Both my boys and I can use the printer. (We", "* What do you like most * What do you find most annoying", "I would like to share the printer over my home network so that:", "* What do you find most annoying * What do you want to", "do you find most annoying * What do you want to change ", "What is the interface (web interface, print driver, etc.) What services are", "or still print if my sons forgot to disconnect * What sort of", "What Hardware and Software are you using * What do you like most", "if my sons forgot to disconnect * What sort of monitoring is supported?", "(might) be willing to use What I want to know: * Are you", "Windows 10 PCs) 2. I can initiate a print from my computer upstairs", "use) * A RAMPS board set that I could use to run Marlin.", "use to run Marlin. * A Raspberrry Pi 1B * An idle laptop", "interface, print driver, etc.) * What services are provided (printing, slicing, monitoring, etc.)", "use What I want to know: * Are you sharing your printer on", "I can monitor the print progress remotely I have (and could use) ", "that I could use to run Marlin. A Raspberrry Pi 1B ", "and if so, how long What Hardware and Software are you using", "be willing to use What I want to know: * Are you sharing", "3. I can monitor the print progress remotely I have (and could use)", "run Marlin. * A Raspberrry Pi 1B * An idle laptop I (might)", "from my computer upstairs 3. I can monitor the print progress remotely I", "Melzi board. I would like to share the printer over my home network", "is the interface (web interface, print driver, etc.) * What services are provided", "I can initiate a print from my computer upstairs 3. I can monitor", "print if my sons forgot to disconnect * What sort of monitoring is", "change * What is the interface (web interface, print driver, etc.) * What", "two computers access it at the same time Ex: To monitor, or still", "to run Marlin. * A Raspberrry Pi 1B * An idle laptop I", "I (might) be willing to use What I want to know: * Are", "monitor the print progress remotely I have (and could use) * A RAMPS", "* What services are provided (printing, slicing, monitoring, etc.) * Can two computers", "An idle laptop I (might) be willing to use What I want to", "a network, and if so, how long * What Hardware and Software are", "the same time Ex: To monitor, or still print if my sons forgot", "* A Raspberrry Pi 1B * An idle laptop I (might) be willing", "printer on a network, and if so, how long * What Hardware and", "you find most annoying * What do you want to change * What", "Raspberrry Pi 1B * An idle laptop I (might) be willing to use", "and Software are you using * What do you like most * What", "A Raspberrry Pi 1B * An idle laptop I (might) be willing to", "to use What I want to know: * Are you sharing your printer", "initiate a print from my computer upstairs 3. I can monitor the print", "home network so that: 1. Both my boys and I can use the", "share the printer over my home network so that: 1. Both my boys", "printer. (We have separate Windows 10 PCs) 2. I can initiate a print", "RAMPS board set that I could use to run Marlin. * A Raspberrry", "the printer over my home network so that: 1. Both my boys and", "Clone) running Repetier firmware on a Melzi board. I would like to share", "want to know: * Are you sharing your printer on a network, and", "you using * What do you like most * What do you find", "Pi 1B * An idle laptop I (might) be willing to use What", "print driver, etc.) * What services are provided (printing, slicing, monitoring, etc.) ", "services are provided (printing, slicing, monitoring, etc.) Can two computers access it", "to disconnect * What sort of monitoring is supported? Ex: camera? * What", "like most * What do you find most annoying * What do you", "on a Melzi board. I would like to share the printer over my", "are provided (printing, slicing, monitoring, etc.) * Can two computers access it at", "print progress remotely I have (and could use) * A RAMPS board set", "long * What Hardware and Software are you using * What do you", "etc.) * Can two computers access it at the same time Ex: To", "2. I can initiate a print from my computer upstairs 3. I can", "* An idle laptop I (might) be willing to use What I want", "board. I would like to share the printer over my home network so", "the printer. (We have separate Windows 10 PCs) 2. I can initiate a", "driver, etc.) * What services are provided (printing, slicing, monitoring, etc.) * Can", "I could use to run Marlin. * A Raspberrry Pi 1B * An", "over my home network so that: 1. Both my boys and I can", "upstairs 3. I can monitor the print progress remotely I have (and could", "Can two computers access it at the same time Ex: To monitor, or", "I have a Tronxy X3 (i3 Clone) running Repetier firmware on a Melzi", "What services are provided (printing, slicing, monitoring, etc.) * Can two computers access", "if so, how long * What Hardware and Software are you using ", "board set that I could use to run Marlin. A Raspberrry Pi", "use the printer. (We have separate Windows 10 PCs) 2. I can initiate", "to know: * Are you sharing your printer on a network, and if", "how long * What Hardware and Software are you using * What do", "would like to share the printer over my home network so that: 1.", "(and could use) * A RAMPS board set that I could use to", "* A RAMPS board set that I could use to run Marlin. ", "Marlin. A Raspberrry Pi 1B * An idle laptop I (might) be", "the print progress remotely I have (and could use) * A RAMPS board", "sharing your printer on a network, and if so, how long * What", "provided (printing, slicing, monitoring, etc.) * Can two computers access it at the", "a Melzi board. I would like to share the printer over my home", "* What is the interface (web interface, print driver, etc.) * What services", "using * What do you like most * What do you find most", "same time Ex: To monitor, or still print if my sons forgot to", "computer upstairs 3. I can monitor the print progress remotely I have (and", "I want to know: * Are you sharing your printer on a network,", "laptop I (might) be willing to use What I want to know: ", "at the same time Ex: To monitor, or still print if my sons", "monitor, or still print if my sons forgot to disconnect What sort", "Both my boys and I can use the printer. (We have separate Windows", "boys and I can use the printer. (We have separate Windows 10 PCs)", "disconnect * What sort of monitoring is supported? Ex: camera? * What runs", "your printer on a network, and if so, how long * What Hardware", "Repetier firmware on a Melzi board. I would like to share the printer", "want to change * What is the interface (web interface, print driver, etc.)", "What do you find most annoying * What do you want to change", "progress remotely I have (and could use) * A RAMPS board set that", "have separate Windows 10 PCs) 2. I can initiate a print from my", "access it at the same time Ex: To monitor, or still print if", "network so that: 1. Both my boys and I can use the printer.", "time Ex: To monitor, or still print if my sons forgot to disconnect", "a Tronxy X3 (i3 Clone) running Repetier firmware on a Melzi board. I", "I can use the printer. (We have separate Windows 10 PCs) 2. I", "most annoying * What do you want to change * What is the", "monitoring, etc.) * Can two computers access it at the same time Ex:", "A RAMPS board set that I could use to run Marlin. * A", "What sort of monitoring is supported? Ex: camera? * What runs the print", "running Repetier firmware on a Melzi board. I would like to share the", "so, how long * What Hardware and Software are you using * What", "print from my computer upstairs 3. I can monitor the print progress remotely", "Are you sharing your printer on a network, and if so, how long", "What I want to know: * Are you sharing your printer on a", "the interface (web interface, print driver, etc.) * What services are provided (printing,", "* Can two computers access it at the same time Ex: To monitor,", "etc.) * What services are provided (printing, slicing, monitoring, etc.) * Can two", "printer over my home network so that: 1. Both my boys and I", "* What do you want to change * What is the interface (web", "idle laptop I (might) be willing to use What I want to know:", "my boys and I can use the printer. (We have separate Windows 10", "forgot to disconnect * What sort of monitoring is supported? Ex: camera? ", "my home network so that: 1. Both my boys and I can use", "PCs) 2. I can initiate a print from my computer upstairs 3. I", "have a Tronxy X3 (i3 Clone) running Repetier firmware on a Melzi board.", "could use) A RAMPS board set that I could use to run", "my sons forgot to disconnect * What sort of monitoring is supported? Ex:", "10 PCs) 2. I can initiate a print from my computer upstairs 3.", "computers access it at the same time Ex: To monitor, or still print", "are you using * What do you like most * What do you", "most * What do you find most annoying * What do you want", "sort of monitoring is supported? Ex: camera? * What runs the print job", "(We have separate Windows 10 PCs) 2. I can initiate a print from", "have (and could use) * A RAMPS board set that I could use", "you want to change * What is the interface (web interface, print driver,", "willing to use What I want to know: * Are you sharing your", "it at the same time Ex: To monitor, or still print if my", "still print if my sons forgot to disconnect * What sort of monitoring", "that: 1. Both my boys and I can use the printer. (We have", "could use to run Marlin. * A Raspberrry Pi 1B * An idle", "What do you want to change * What is the interface (web interface,", "and I can use the printer. (We have separate Windows 10 PCs) 2.", "* Are you sharing your printer on a network, and if so, how", "do you like most * What do you find most annoying * What", "my computer upstairs 3. I can monitor the print progress remotely I have", "on a network, and if so, how long * What Hardware and Software", "(web interface, print driver, etc.) * What services are provided (printing, slicing, monitoring,", "like to share the printer over my home network so that: 1. Both", "1. Both my boys and I can use the printer. (We have separate", "annoying * What do you want to change * What is the interface", "slicing, monitoring, etc.) * Can two computers access it at the same time", "network, and if so, how long * What Hardware and Software are you", "(i3 Clone) running Repetier firmware on a Melzi board. I would like to", "Tronxy X3 (i3 Clone) running Repetier firmware on a Melzi board. I would", "you sharing your printer on a network, and if so, how long *", "can use the printer. (We have separate Windows 10 PCs) 2. I can", "separate Windows 10 PCs) 2. I can initiate a print from my computer", "a print from my computer upstairs 3. I can monitor the print progress" ]
[ "so much of a problem, as just a question for interest. Also not", "(e.g. changing filament after warming up, retract gave me some X movement) Printer", "and the extruder moves to the right. I have no auto-leveling or anything", "have no auto-leveling or anything else non-standard on this printer (dual Z steppers,", "I'm using mainly OctoPrint, but I think I've also observed this with other", "for me to have identified any pattern - maybe it only happens if", "to the right. I have no auto-leveling or anything else non-standard on this", "extrude some of the time (e.g. changing filament after warming up, retract gave", "mainly OctoPrint, but I think I've also observed this with other PC software", "happen often enough for me to have identified any pattern - maybe it", "axis movement (typically Z, when I want better access to the extruder), I", "any pattern - maybe it only happens if I've not homed first after", "movement, subsequent commands have the result I'm expecting. What happens is as well", "maybe move slower than I expect). After one 'coupled' movement, subsequent commands have", "pattern - maybe it only happens if I've not homed first after turning", "suspect not. It's not so much of a problem, as just a question", "extruder), I observe that several channels move together (and they maybe move slower", "filament after warming up, retract gave me some X movement) Printer is an", "of a problem, as just a question for interest. Also not sure how", "OctoPrint, but I think I've also observed this with other PC software manual", "movement (typically Z, when I want better access to the extruder), I observe", "I have no auto-leveling or anything else non-standard on this printer (dual Z", "up, retract gave me some X movement) Printer is an ANET-A8, I'm using", "that if I manually command a single axis movement (typically Z, when I", "a problem, as just a question for interest. Also not sure how to", "After one 'coupled' movement, subsequent commands have the result I'm expecting. What happens", "'coupled' movement, subsequent commands have the result I'm expecting. What happens is as", "controls. It doesn't happen often enough for me to have identified any pattern", "I simply extrude some of the time (e.g. changing filament after warming up,", "manual controls. It doesn't happen often enough for me to have identified any", "time (e.g. changing filament after warming up, retract gave me some X movement)", "this printer (dual Z steppers, X, Y, extruder, bed, extruder heat). It even", "the time (e.g. changing filament after warming up, retract gave me some X", "I want better access to the extruder), I observe that several channels move", "the extruder moves to the right. I have no auto-leveling or anything else", "auto-leveling or anything else non-standard on this printer (dual Z steppers, X, Y,", "of the time (e.g. changing filament after warming up, retract gave me some", "they maybe move slower than I expect). After one 'coupled' movement, subsequent commands", "homed first after turning the printer on, but I suspect not. It's not", "if I simply extrude some of the time (e.g. changing filament after warming", "software manual controls. It doesn't happen often enough for me to have identified", "than I expect). After one 'coupled' movement, subsequent commands have the result I'm", "other PC software manual controls. It doesn't happen often enough for me to", "often enough for me to have identified any pattern - maybe it only", "have the result I'm expecting. What happens is as well as the Z-axis", "an ANET-A8, I'm using mainly OctoPrint, but I think I've also observed this", "anything else non-standard on this printer (dual Z steppers, X, Y, extruder, bed,", "if I manually command a single axis movement (typically Z, when I want", "some of the time (e.g. changing filament after warming up, retract gave me", "is an ANET-A8, I'm using mainly OctoPrint, but I think I've also observed", "moving up, the bed moves forward, and the extruder moves to the right.", "Z, when I want better access to the extruder), I observe that several", "as the Z-axis moving up, the bed moves forward, and the extruder moves", "non-standard on this printer (dual Z steppers, X, Y, extruder, bed, extruder heat).", "right. I have no auto-leveling or anything else non-standard on this printer (dual", "to have identified any pattern - maybe it only happens if I've not", "but I think I've also observed this with other PC software manual controls.", "It doesn't happen often enough for me to have identified any pattern -", "that several channels move together (and they maybe move slower than I expect).", "one 'coupled' movement, subsequent commands have the result I'm expecting. What happens is", "the printer on, but I suspect not. It's not so much of a", "printer on, but I suspect not. It's not so much of a problem,", "have identified any pattern - maybe it only happens if I've not homed", "result I'm expecting. What happens is as well as the Z-axis moving up,", "a single axis movement (typically Z, when I want better access to the", "the bed moves forward, and the extruder moves to the right. I have", "(dual Z steppers, X, Y, extruder, bed, extruder heat). It even happens if", "Y, extruder, bed, extruder heat). It even happens if I simply extrude some", "retract gave me some X movement) Printer is an ANET-A8, I'm using mainly", "want better access to the extruder), I observe that several channels move together", "the Z-axis moving up, the bed moves forward, and the extruder moves to", "slower than I expect). After one 'coupled' movement, subsequent commands have the result", "gave me some X movement) Printer is an ANET-A8, I'm using mainly OctoPrint,", "me some X movement) Printer is an ANET-A8, I'm using mainly OctoPrint, but", "with other PC software manual controls. It doesn't happen often enough for me", "it only happens if I've not homed first after turning the printer on,", "observed this with other PC software manual controls. It doesn't happen often enough", "I'm expecting. What happens is as well as the Z-axis moving up, the", "movement) Printer is an ANET-A8, I'm using mainly OctoPrint, but I think I've", "X movement) Printer is an ANET-A8, I'm using mainly OctoPrint, but I think", "think I've also observed this with other PC software manual controls. It doesn't", "much of a problem, as just a question for interest. Also not sure", "extruder heat). It even happens if I simply extrude some of the time", "PC software manual controls. It doesn't happen often enough for me to have", "forward, and the extruder moves to the right. I have no auto-leveling or", "or anything else non-standard on this printer (dual Z steppers, X, Y, extruder,", "bed moves forward, and the extruder moves to the right. I have no", "the result I'm expecting. What happens is as well as the Z-axis moving", "(typically Z, when I want better access to the extruder), I observe that", "after warming up, retract gave me some X movement) Printer is an ANET-A8,", "as well as the Z-axis moving up, the bed moves forward, and the", "several channels move together (and they maybe move slower than I expect). After", "single axis movement (typically Z, when I want better access to the extruder),", "extruder moves to the right. I have no auto-leveling or anything else non-standard", "well as the Z-axis moving up, the bed moves forward, and the extruder", "turning the printer on, but I suspect not. It's not so much of", "on, but I suspect not. It's not so much of a problem, as", "move together (and they maybe move slower than I expect). After one 'coupled'", "identified any pattern - maybe it only happens if I've not homed first", "first after turning the printer on, but I suspect not. It's not so", "It's not so much of a problem, as just a question for interest.", "warming up, retract gave me some X movement) Printer is an ANET-A8, I'm", "commands have the result I'm expecting. What happens is as well as the", "access to the extruder), I observe that several channels move together (and they", "I expect). After one 'coupled' movement, subsequent commands have the result I'm expecting.", "better access to the extruder), I observe that several channels move together (and", "on this printer (dual Z steppers, X, Y, extruder, bed, extruder heat). It", "move slower than I expect). After one 'coupled' movement, subsequent commands have the", "I've not homed first after turning the printer on, but I suspect not.", "the extruder), I observe that several channels move together (and they maybe move", "using mainly OctoPrint, but I think I've also observed this with other PC", "What happens is as well as the Z-axis moving up, the bed moves", "after turning the printer on, but I suspect not. It's not so much", "no auto-leveling or anything else non-standard on this printer (dual Z steppers, X,", "moves forward, and the extruder moves to the right. I have no auto-leveling", "only happens if I've not homed first after turning the printer on, but", "I observe that several channels move together (and they maybe move slower than", "also observed this with other PC software manual controls. It doesn't happen often", "when I want better access to the extruder), I observe that several channels", "doesn't happen often enough for me to have identified any pattern - maybe", "I think I've also observed this with other PC software manual controls. It", "expect). After one 'coupled' movement, subsequent commands have the result I'm expecting. What", "printer (dual Z steppers, X, Y, extruder, bed, extruder heat). It even happens", "expecting. What happens is as well as the Z-axis moving up, the bed", "problem, as just a question for interest. Also not sure how to tag.", "manually command a single axis movement (typically Z, when I want better access", "even happens if I simply extrude some of the time (e.g. changing filament", "happens if I've not homed first after turning the printer on, but I", "I manually command a single axis movement (typically Z, when I want better", "but I suspect not. It's not so much of a problem, as just", "It even happens if I simply extrude some of the time (e.g. changing", "changing filament after warming up, retract gave me some X movement) Printer is", "(and they maybe move slower than I expect). After one 'coupled' movement, subsequent", "ANET-A8, I'm using mainly OctoPrint, but I think I've also observed this with", "extruder, bed, extruder heat). It even happens if I simply extrude some of", "some X movement) Printer is an ANET-A8, I'm using mainly OctoPrint, but I", "not so much of a problem, as just a question for interest. Also", "this with other PC software manual controls. It doesn't happen often enough for", "channels move together (and they maybe move slower than I expect). After one", "is as well as the Z-axis moving up, the bed moves forward, and", "heat). It even happens if I simply extrude some of the time (e.g.", "enough for me to have identified any pattern - maybe it only happens", "up, the bed moves forward, and the extruder moves to the right. I", "me to have identified any pattern - maybe it only happens if I've", "observe that several channels move together (and they maybe move slower than I", "not. It's not so much of a problem, as just a question for", "together (and they maybe move slower than I expect). After one 'coupled' movement,", "not homed first after turning the printer on, but I suspect not. It's", "the right. I have no auto-leveling or anything else non-standard on this printer", "Sometimes I notice that if I manually command a single axis movement (typically", "subsequent commands have the result I'm expecting. What happens is as well as", "happens is as well as the Z-axis moving up, the bed moves forward,", "Z-axis moving up, the bed moves forward, and the extruder moves to the", "X, Y, extruder, bed, extruder heat). It even happens if I simply extrude", "Z steppers, X, Y, extruder, bed, extruder heat). It even happens if I", "I notice that if I manually command a single axis movement (typically Z,", "if I've not homed first after turning the printer on, but I suspect", "I've also observed this with other PC software manual controls. It doesn't happen", "to the extruder), I observe that several channels move together (and they maybe", "bed, extruder heat). It even happens if I simply extrude some of the", "simply extrude some of the time (e.g. changing filament after warming up, retract", "- maybe it only happens if I've not homed first after turning the", "else non-standard on this printer (dual Z steppers, X, Y, extruder, bed, extruder", "happens if I simply extrude some of the time (e.g. changing filament after", "steppers, X, Y, extruder, bed, extruder heat). It even happens if I simply", "command a single axis movement (typically Z, when I want better access to", "notice that if I manually command a single axis movement (typically Z, when", "maybe it only happens if I've not homed first after turning the printer", "moves to the right. I have no auto-leveling or anything else non-standard on", "Printer is an ANET-A8, I'm using mainly OctoPrint, but I think I've also", "I suspect not. It's not so much of a problem, as just a" ]
[ "spiral mode * increasing layer height * changing filament * upgrading printer (latest", "you can see in the images, the first few layers print ok, but", "is a combination of rough textured surface and good quality surface. One half", "increased extrusion width caused by squashing layers in the z-axis. I’ve tried ", "by squashing layers in the z-axis. I’ve tried changing model's wall thickness,", "cup object. I'm using: * Simplify3D with Sigma Progen profiles * 0.6mm brass", "* upgrading printer (latest stepper drivers) * changing extrusion width * performing full", "print. [![A picture of my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer is a BCN3D Sigma", "then the nozzle seems to collide/penetrate the previous layer and grinds against it", "wall (0.6mm) cup object. I'm using: * Simplify3D with Sigma Progen profiles ", "printer is a BCN3D Sigma R17. I am printing a thin wall (0.6mm)", "Sigma Progen profiles 0.6mm brass nozzle (w/thermal paste) * 0.1mm layer height", "model's wall thickness, * disabling spiral mode * increasing layer height * changing", "width * performing full calibration All without success. You can view the gcode", "to be squeezed out from excess pressure, as if it was being blocked", "intermittent printing error specific to one particular object I'm trying to print. [![A", "in the images, the first few layers print ok, but then the nozzle", "image shows some filament left hanging from a stopped print. It seemed to", "collide/penetrate the previous layer and grinds against it as it moves around in", "hanging from a stopped print. It seemed to be squeezed out from excess", "good quality surface. One half of the print also seems to be thicker,", "from the increased extrusion width caused by squashing layers in the z-axis. I’ve", "* Spiral (vase mode) * Filaform PLA. As you can see in the", "* Filaform PLA. As you can see in the images, the first few", "height * changing filament * upgrading printer (latest stepper drivers) * changing extrusion", "view the gcode and S3D fff profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image shows some", "a combination of rough textured surface and good quality surface. One half of", "the gcode and S3D fff profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image shows some filament", "fff profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image shows some filament left hanging from a", "excess pressure, as if it was being blocked during the print due to", "layers print ok, but then the nozzle seems to collide/penetrate the previous layer", "am having a strange intermittent printing error specific to one particular object I'm", "My printer is a BCN3D Sigma R17. I am printing a thin wall", "[![A picture of my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer is a BCN3D Sigma R17.", "a strange intermittent printing error specific to one particular object I'm trying to", "* performing full calibration All without success. You can view the gcode and", "S3D fff profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image shows some filament left hanging from", "images, the first few layers print ok, but then the nozzle seems to", "layers in the z-axis. I’ve tried * changing model's wall thickness, * disabling", "moves around in a circle. The result is a combination of rough textured", "mode * increasing layer height * changing filament * upgrading printer (latest stepper", "grinds against it as it moves around in a circle. The result is", "having a strange intermittent printing error specific to one particular object I'm trying", "tried * changing model's wall thickness, * disabling spiral mode * increasing layer", "without success. You can view the gcode and S3D fff profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing>", "the increased extrusion width caused by squashing layers in the z-axis. I’ve tried", "and grinds against it as it moves around in a circle. The result", "I'm using: * Simplify3D with Sigma Progen profiles * 0.6mm brass nozzle (w/thermal", "it was being blocked during the print due to being pushed against the", "the nozzle seems to collide/penetrate the previous layer and grinds against it as", "mode) * Filaform PLA. As you can see in the images, the first", "* changing extrusion width * performing full calibration All without success. You can", "my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer is a BCN3D Sigma R17. I am printing", "drivers) * changing extrusion width * performing full calibration All without success. You", "first few layers print ok, but then the nozzle seems to collide/penetrate the", "of my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer is a BCN3D Sigma R17. I am", "Simplify3D with Sigma Progen profiles * 0.6mm brass nozzle (w/thermal paste) * 0.1mm", "specific to one particular object I'm trying to print. [![A picture of my", "profiles * 0.6mm brass nozzle (w/thermal paste) * 0.1mm layer height * Spiral", "squashing layers in the z-axis. I’ve tried * changing model's wall thickness, ", "out from excess pressure, as if it was being blocked during the print", " disabling spiral mode * increasing layer height * changing filament * upgrading", "error specific to one particular object I'm trying to print. [![A picture of", "half of the print also seems to be thicker, presumably from the increased", "caused by squashing layers in the z-axis. I’ve tried * changing model's wall", "also seems to be thicker, presumably from the increased extrusion width caused by", "to print. [![A picture of my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer is a BCN3D", "with Sigma Progen profiles * 0.6mm brass nozzle (w/thermal paste) * 0.1mm layer", "(vase mode) * Filaform PLA. As you can see in the images, the", "It seemed to be squeezed out from excess pressure, as if it was", "against it as it moves around in a circle. The result is a", "object. I'm using: * Simplify3D with Sigma Progen profiles * 0.6mm brass nozzle", "brass nozzle (w/thermal paste) * 0.1mm layer height * Spiral (vase mode) ", "rough textured surface and good quality surface. One half of the print also", "be squeezed out from excess pressure, as if it was being blocked during", "upgrading printer (latest stepper drivers) changing extrusion width * performing full calibration", "* changing model's wall thickness, * disabling spiral mode * increasing layer height", "I am having a strange intermittent printing error specific to one particular object", "print also seems to be thicker, presumably from the increased extrusion width caused", "thicker, presumably from the increased extrusion width caused by squashing layers in the", "R17. I am printing a thin wall (0.6mm) cup object. I'm using: ", "around in a circle. The result is a combination of rough textured surface", "and good quality surface. One half of the print also seems to be", "as if it was being blocked during the print due to being pushed", "to one particular object I'm trying to print. [![A picture of my print", "As you can see in the images, the first few layers print ok,", "height Spiral (vase mode) * Filaform PLA. As you can see in", "nozzle seems to collide/penetrate the previous layer and grinds against it as it", "printer (latest stepper drivers) * changing extrusion width * performing full calibration All", "print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer is a BCN3D Sigma R17. I am printing a", "layer height * changing filament * upgrading printer (latest stepper drivers) * changing", "<https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image shows some filament left hanging from a stopped print. It", "BCN3D Sigma R17. I am printing a thin wall (0.6mm) cup object. I'm", "printing a thin wall (0.6mm) cup object. I'm using: * Simplify3D with Sigma", "result is a combination of rough textured surface and good quality surface. One", "z-axis. I’ve tried * changing model's wall thickness, * disabling spiral mode ", "one particular object I'm trying to print. [![A picture of my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg)", "to be thicker, presumably from the increased extrusion width caused by squashing layers", "ok, but then the nozzle seems to collide/penetrate the previous layer and grinds", "0.6mm brass nozzle (w/thermal paste) 0.1mm layer height * Spiral (vase mode)", "see in the images, the first few layers print ok, but then the", "extrusion width * performing full calibration All without success. You can view the", "gcode and S3D fff profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image shows some filament left", "* 0.1mm layer height * Spiral (vase mode) * Filaform PLA. As you", "combination of rough textured surface and good quality surface. One half of the", "The result is a combination of rough textured surface and good quality surface.", "few layers print ok, but then the nozzle seems to collide/penetrate the previous", "but then the nozzle seems to collide/penetrate the previous layer and grinds against", "stepper drivers) * changing extrusion width * performing full calibration All without success.", "seems to be thicker, presumably from the increased extrusion width caused by squashing", "trying to print. [![A picture of my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer is a", "changing filament * upgrading printer (latest stepper drivers) * changing extrusion width ", "I’ve tried changing model's wall thickness, * disabling spiral mode * increasing", "seems to collide/penetrate the previous layer and grinds against it as it moves", "and S3D fff profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image shows some filament left hanging", "picture of my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer is a BCN3D Sigma R17. I", "print ok, but then the nozzle seems to collide/penetrate the previous layer and", "presumably from the increased extrusion width caused by squashing layers in the z-axis.", "disabling spiral mode * increasing layer height * changing filament * upgrading printer", "previous layer and grinds against it as it moves around in a circle.", "as it moves around in a circle. The result is a combination of", "changing model's wall thickness, * disabling spiral mode * increasing layer height ", "success. You can view the gcode and S3D fff profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The", "the print also seems to be thicker, presumably from the increased extrusion width", "left hanging from a stopped print. It seemed to be squeezed out from", "0.1mm layer height Spiral (vase mode) * Filaform PLA. As you can", "a BCN3D Sigma R17. I am printing a thin wall (0.6mm) cup object.", "to collide/penetrate the previous layer and grinds against it as it moves around", "circle. The result is a combination of rough textured surface and good quality", "printing error specific to one particular object I'm trying to print. [![A picture", "Progen profiles * 0.6mm brass nozzle (w/thermal paste) * 0.1mm layer height ", "width caused by squashing layers in the z-axis. I’ve tried changing model's", "increasing layer height * changing filament * upgrading printer (latest stepper drivers) ", "Sigma R17. I am printing a thin wall (0.6mm) cup object. I'm using:", "am printing a thin wall (0.6mm) cup object. I'm using: Simplify3D with", "from excess pressure, as if it was being blocked during the print due", "pressure, as if it was being blocked during the print due to being", "One half of the print also seems to be thicker, presumably from the", "* 0.6mm brass nozzle (w/thermal paste) * 0.1mm layer height * Spiral (vase", "can see in the images, the first few layers print ok, but then", "of the print also seems to be thicker, presumably from the increased extrusion", "if it was being blocked during the print due to being pushed against", "nozzle (w/thermal paste) * 0.1mm layer height * Spiral (vase mode) * Filaform", "calibration All without success. You can view the gcode and S3D fff profile", "from a stopped print. It seemed to be squeezed out from excess pressure,", "strange intermittent printing error specific to one particular object I'm trying to print.", "a thin wall (0.6mm) cup object. I'm using: * Simplify3D with Sigma Progen", "wall thickness, * disabling spiral mode * increasing layer height * changing filament", "You can view the gcode and S3D fff profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image", "squeezed out from excess pressure, as if it was being blocked during the", "(0.6mm) cup object. I'm using: * Simplify3D with Sigma Progen profiles * 0.6mm", "was being blocked during the print due to being pushed against the layers.", "some filament left hanging from a stopped print. It seemed to be squeezed", "filament * upgrading printer (latest stepper drivers) * changing extrusion width * performing", "be thicker, presumably from the increased extrusion width caused by squashing layers in", "The image shows some filament left hanging from a stopped print. It seemed", "in a circle. The result is a combination of rough textured surface and", "* changing filament * upgrading printer (latest stepper drivers) * changing extrusion width", "performing full calibration All without success. You can view the gcode and S3D", "here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image shows some filament left hanging from a stopped print.", "thin wall (0.6mm) cup object. I'm using: * Simplify3D with Sigma Progen profiles", "a stopped print. It seemed to be squeezed out from excess pressure, as", "layer and grinds against it as it moves around in a circle. The", "it moves around in a circle. The result is a combination of rough", "extrusion width caused by squashing layers in the z-axis. I’ve tried * changing", "using: * Simplify3D with Sigma Progen profiles * 0.6mm brass nozzle (w/thermal paste)", "stopped print. It seemed to be squeezed out from excess pressure, as if", "paste) * 0.1mm layer height * Spiral (vase mode) * Filaform PLA. As", "error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer is a BCN3D Sigma R17. I am printing a thin", "Spiral (vase mode) * Filaform PLA. As you can see in the images,", "filament left hanging from a stopped print. It seemed to be squeezed out", "* Simplify3D with Sigma Progen profiles * 0.6mm brass nozzle (w/thermal paste) ", "the previous layer and grinds against it as it moves around in a", "print. It seemed to be squeezed out from excess pressure, as if it", "I am printing a thin wall (0.6mm) cup object. I'm using: Simplify3D", "I'm trying to print. [![A picture of my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer is", "the first few layers print ok, but then the nozzle seems to collide/penetrate", "profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image shows some filament left hanging from a stopped", "the z-axis. I’ve tried * changing model's wall thickness, * disabling spiral mode", "full calibration All without success. You can view the gcode and S3D fff", "a circle. The result is a combination of rough textured surface and good", "in the z-axis. I’ve tried * changing model's wall thickness, * disabling spiral", "seemed to be squeezed out from excess pressure, as if it was being", "object I'm trying to print. [![A picture of my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My printer", "is a BCN3D Sigma R17. I am printing a thin wall (0.6mm) cup", "PLA. As you can see in the images, the first few layers print", "surface and good quality surface. One half of the print also seems to", "thickness, * disabling spiral mode * increasing layer height * changing filament ", "Filaform PLA. As you can see in the images, the first few layers", "layer height Spiral (vase mode) * Filaform PLA. As you can see", "changing extrusion width * performing full calibration All without success. You can view", "particular object I'm trying to print. [![A picture of my print error](https://i.stack.imgur.com/L7Sxz.jpg)](https://i.stack.imgur.com/L7Sxz.jpg) My", "* increasing layer height * changing filament * upgrading printer (latest stepper drivers)", "All without success. You can view the gcode and S3D fff profile here:", "can view the gcode and S3D fff profile here: <https://drive.google.com/drive/folders/0B6SnaYyiYI7vcGU1U3Uxb0RrX3M?usp=sharing> The image shows", "quality surface. One half of the print also seems to be thicker, presumably", "(latest stepper drivers) * changing extrusion width * performing full calibration All without", "it as it moves around in a circle. The result is a combination", "shows some filament left hanging from a stopped print. It seemed to be", "of rough textured surface and good quality surface. One half of the print", "(w/thermal paste) * 0.1mm layer height * Spiral (vase mode) * Filaform PLA.", "textured surface and good quality surface. One half of the print also seems", "surface. One half of the print also seems to be thicker, presumably from", "the images, the first few layers print ok, but then the nozzle seems" ]
[ "layer. Any ideas on how to solve this? * Printing PLA at 210°C;", "at 210°C; * First layer temp is 225°C; * Bed temp at 60°C;", "it will always get stuck to the hotend at some point and rip", "I start a print and the skirt goes down fine, then the outline", "* Bed temp at 60°C; * 1.75 mm filament, and; * 0.4 mm", "problem. I start a print and the skirt goes down fine, then the", "solve this? * Printing PLA at 210°C; * First layer temp is 225°C;", "wits end with this problem. I start a print and the skirt goes", "filament, and; * 0.4 mm nozzle. Maker Select V2.1, using Cura to slice.", "Printing PLA at 210°C; * First layer temp is 225°C; * Bed temp", "when it goes to fill in the first layer, it will always get", "the first layer, it will always get stuck to the hotend at some", "to the hotend at some point and rip apart the layer. Any ideas", "on how to solve this? * Printing PLA at 210°C; * First layer", "am at my wits end with this problem. I start a print and", "get stuck to the hotend at some point and rip apart the layer.", "to solve this? * Printing PLA at 210°C; * First layer temp is", "down fine, then the outline of the parts go down fine (usually) and", "and then when it goes to fill in the first layer, it will", "apart the layer. Any ideas on how to solve this? * Printing PLA", "with this problem. I start a print and the skirt goes down fine,", "hotend at some point and rip apart the layer. Any ideas on how", "at my wits end with this problem. I start a print and the", "a print and the skirt goes down fine, then the outline of the", "first layer, it will always get stuck to the hotend at some point", "at some point and rip apart the layer. Any ideas on how to", "temp is 225°C; * Bed temp at 60°C; * 1.75 mm filament, and;", "some point and rip apart the layer. Any ideas on how to solve", "the layer. Any ideas on how to solve this? * Printing PLA at", "(usually) and then when it goes to fill in the first layer, it", "I am at my wits end with this problem. I start a print", "* 1.75 mm filament, and; * 0.4 mm nozzle. Maker Select V2.1, using", "goes down fine, then the outline of the parts go down fine (usually)", "* First layer temp is 225°C; * Bed temp at 60°C; * 1.75", "how to solve this? * Printing PLA at 210°C; * First layer temp", "rip apart the layer. Any ideas on how to solve this? * Printing", "go down fine (usually) and then when it goes to fill in the", "then when it goes to fill in the first layer, it will always", "at 60°C; * 1.75 mm filament, and; * 0.4 mm nozzle. Maker Select", "mm filament, and; * 0.4 mm nozzle. Maker Select V2.1, using Cura to", "ideas on how to solve this? * Printing PLA at 210°C; * First", "* Printing PLA at 210°C; * First layer temp is 225°C; * Bed", "end with this problem. I start a print and the skirt goes down", "in the first layer, it will always get stuck to the hotend at", "the outline of the parts go down fine (usually) and then when it", "60°C; * 1.75 mm filament, and; * 0.4 mm nozzle. Maker Select V2.1,", "fine, then the outline of the parts go down fine (usually) and then", "225°C; * Bed temp at 60°C; * 1.75 mm filament, and; * 0.4", "parts go down fine (usually) and then when it goes to fill in", "the hotend at some point and rip apart the layer. Any ideas on", "is 225°C; * Bed temp at 60°C; * 1.75 mm filament, and; ", "temp at 60°C; 1.75 mm filament, and; * 0.4 mm nozzle. Maker", "start a print and the skirt goes down fine, then the outline of", "the parts go down fine (usually) and then when it goes to fill", "skirt goes down fine, then the outline of the parts go down fine", "outline of the parts go down fine (usually) and then when it goes", "my wits end with this problem. I start a print and the skirt", "print and the skirt goes down fine, then the outline of the parts", "will always get stuck to the hotend at some point and rip apart", "layer, it will always get stuck to the hotend at some point and", "First layer temp is 225°C; * Bed temp at 60°C; * 1.75 mm", "stuck to the hotend at some point and rip apart the layer. Any", "layer temp is 225°C; * Bed temp at 60°C; * 1.75 mm filament,", "and rip apart the layer. Any ideas on how to solve this? ", "210°C; First layer temp is 225°C; * Bed temp at 60°C; ", "down fine (usually) and then when it goes to fill in the first", "fill in the first layer, it will always get stuck to the hotend", "always get stuck to the hotend at some point and rip apart the", "Any ideas on how to solve this? Printing PLA at 210°C; ", "the skirt goes down fine, then the outline of the parts go down", "PLA at 210°C; First layer temp is 225°C; * Bed temp at", "point and rip apart the layer. Any ideas on how to solve this?", "to fill in the first layer, it will always get stuck to the", "goes to fill in the first layer, it will always get stuck to", "1.75 mm filament, and; * 0.4 mm nozzle. Maker Select V2.1, using Cura", "this problem. I start a print and the skirt goes down fine, then", "of the parts go down fine (usually) and then when it goes to", "it goes to fill in the first layer, it will always get stuck", "fine (usually) and then when it goes to fill in the first layer,", "then the outline of the parts go down fine (usually) and then when", "this? * Printing PLA at 210°C; * First layer temp is 225°C; ", "and the skirt goes down fine, then the outline of the parts go", "Bed temp at 60°C; 1.75 mm filament, and; * 0.4 mm nozzle." ]
[ "Travel limits after homing (units are in mm) #define X_MIN_POS 5.0 #define Y_MIN_POS", "in mm) #define X_MIN_POS 5.0 #define Y_MIN_POS 0.0 #define Z_MIN_POS 0 #define X_MAX_POS", "RAMPS board on an Anet A8 printer. The bed size for the printer", "mesh bed leveling, the nozzle jumps to the first corner on the bed", "X_MAX_POS 220 #define Y_MAX_POS 220 #define Z_MAX_POS 240 ``` What could be my", "bed leveling, the nozzle jumps to the first corner on the bed perfectly", "in the `configuration.h` file. When using mesh bed leveling, the nozzle jumps to", "jumps to the first corner on the bed perfectly after setting the x-min", "#define Y_MIN_POS 0.0 #define Z_MIN_POS 0 #define X_MAX_POS 220 #define Y_MAX_POS 220 #define", "firmware with a RAMPS board on an Anet A8 printer. The bed size", "file. When using mesh bed leveling, the nozzle jumps to the first corner", "an Anet A8 printer. The bed size for the printer is 220 x", "is 220 x 220 mm and that is stated in the `configuration.h` file.", "board on an Anet A8 printer. The bed size for the printer is", "the x-min to 5.0 but the next two points are off the end", "``` // Travel limits after homing (units are in mm) #define X_MIN_POS 5.0", "points are off the end of the bed. Here are my settings: ```", "5.0 but the next two points are off the end of the bed.", "Here are my settings: ``` // Travel limits after homing (units are in", "but the next two points are off the end of the bed. Here", "printer is 220 x 220 mm and that is stated in the `configuration.h`", "220 x 220 mm and that is stated in the `configuration.h` file. When", "and that is stated in the `configuration.h` file. When using mesh bed leveling,", "5.0 #define Y_MIN_POS 0.0 #define Z_MIN_POS 0 #define X_MAX_POS 220 #define Y_MAX_POS 220", "my settings: ``` // Travel limits after homing (units are in mm) #define", "for the printer is 220 x 220 mm and that is stated in", "on an Anet A8 printer. The bed size for the printer is 220", "that is stated in the `configuration.h` file. When using mesh bed leveling, the", "Y_MIN_POS 0.0 #define Z_MIN_POS 0 #define X_MAX_POS 220 #define Y_MAX_POS 220 #define Z_MAX_POS", "size for the printer is 220 x 220 mm and that is stated", "limits after homing (units are in mm) #define X_MIN_POS 5.0 #define Y_MIN_POS 0.0", "The bed size for the printer is 220 x 220 mm and that", "printer. The bed size for the printer is 220 x 220 mm and", "0.0 #define Z_MIN_POS 0 #define X_MAX_POS 220 #define Y_MAX_POS 220 #define Z_MAX_POS 240", "first corner on the bed perfectly after setting the x-min to 5.0 but", "bed size for the printer is 220 x 220 mm and that is", "x-min to 5.0 but the next two points are off the end of", "X_MIN_POS 5.0 #define Y_MIN_POS 0.0 #define Z_MIN_POS 0 #define X_MAX_POS 220 #define Y_MAX_POS", "am using Marlin firmware with a RAMPS board on an Anet A8 printer.", "using Marlin firmware with a RAMPS board on an Anet A8 printer. The", "setting the x-min to 5.0 but the next two points are off the", "0 #define X_MAX_POS 220 #define Y_MAX_POS 220 #define Z_MAX_POS 240 ``` What could", "#define X_MIN_POS 5.0 #define Y_MIN_POS 0.0 #define Z_MIN_POS 0 #define X_MAX_POS 220 #define", "perfectly after setting the x-min to 5.0 but the next two points are", "A8 printer. The bed size for the printer is 220 x 220 mm", "a RAMPS board on an Anet A8 printer. The bed size for the", "after homing (units are in mm) #define X_MIN_POS 5.0 #define Y_MIN_POS 0.0 #define", "settings: ``` // Travel limits after homing (units are in mm) #define X_MIN_POS", "nozzle jumps to the first corner on the bed perfectly after setting the", "// Travel limits after homing (units are in mm) #define X_MIN_POS 5.0 #define", "homing (units are in mm) #define X_MIN_POS 5.0 #define Y_MIN_POS 0.0 #define Z_MIN_POS", "the bed. Here are my settings: ``` // Travel limits after homing (units", "`configuration.h` file. When using mesh bed leveling, the nozzle jumps to the first", "Anet A8 printer. The bed size for the printer is 220 x 220", "the first corner on the bed perfectly after setting the x-min to 5.0", "are my settings: ``` // Travel limits after homing (units are in mm)", "the end of the bed. Here are my settings: ``` // Travel limits", "two points are off the end of the bed. Here are my settings:", "to 5.0 but the next two points are off the end of the", "after setting the x-min to 5.0 but the next two points are off", "the next two points are off the end of the bed. Here are", "bed. Here are my settings: ``` // Travel limits after homing (units are", "bed perfectly after setting the x-min to 5.0 but the next two points", "I am using Marlin firmware with a RAMPS board on an Anet A8", "#define X_MAX_POS 220 #define Y_MAX_POS 220 #define Z_MAX_POS 240 ``` What could be", "220 #define Y_MAX_POS 220 #define Z_MAX_POS 240 ``` What could be my issue?", "x 220 mm and that is stated in the `configuration.h` file. When using", "the `configuration.h` file. When using mesh bed leveling, the nozzle jumps to the", "the bed perfectly after setting the x-min to 5.0 but the next two", "stated in the `configuration.h` file. When using mesh bed leveling, the nozzle jumps", "are in mm) #define X_MIN_POS 5.0 #define Y_MIN_POS 0.0 #define Z_MIN_POS 0 #define", "next two points are off the end of the bed. Here are my", "are off the end of the bed. Here are my settings: ``` //", "end of the bed. Here are my settings: ``` // Travel limits after", "off the end of the bed. Here are my settings: ``` // Travel", "When using mesh bed leveling, the nozzle jumps to the first corner on", "Z_MIN_POS 0 #define X_MAX_POS 220 #define Y_MAX_POS 220 #define Z_MAX_POS 240 ``` What", "mm) #define X_MIN_POS 5.0 #define Y_MIN_POS 0.0 #define Z_MIN_POS 0 #define X_MAX_POS 220", "on the bed perfectly after setting the x-min to 5.0 but the next", "(units are in mm) #define X_MIN_POS 5.0 #define Y_MIN_POS 0.0 #define Z_MIN_POS 0", "the printer is 220 x 220 mm and that is stated in the", "is stated in the `configuration.h` file. When using mesh bed leveling, the nozzle", "Marlin firmware with a RAMPS board on an Anet A8 printer. The bed", "the nozzle jumps to the first corner on the bed perfectly after setting", "220 mm and that is stated in the `configuration.h` file. When using mesh", "#define Z_MIN_POS 0 #define X_MAX_POS 220 #define Y_MAX_POS 220 #define Z_MAX_POS 240 ```", "of the bed. Here are my settings: ``` // Travel limits after homing", "using mesh bed leveling, the nozzle jumps to the first corner on the", "mm and that is stated in the `configuration.h` file. When using mesh bed", "with a RAMPS board on an Anet A8 printer. The bed size for", "corner on the bed perfectly after setting the x-min to 5.0 but the", "leveling, the nozzle jumps to the first corner on the bed perfectly after", "to the first corner on the bed perfectly after setting the x-min to" ]
[ "when print starts the auto bedding is ignored and printer acts like before", "auto bedding is ignored and printer acts like before doing auto bed. Please", "it only shows auto bed in menu. I found this code in `cardreader.cpp`", "tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` Now before each print, the printer", "``` void CardReader::openAndPrintFile(const char name) { char cmd[4 + strlen(name) + 1]; //", "null sprintf_P(cmd, PSTR(\"M23 %s\"), name); for (char c = &cmd[4]; c; c++) c", "} ``` Now before each print, the printer does auto bedding two* times", "%s\"), name); for (char c = &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(\"G28\");", "enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` and changed it to ``` void CardReader::openAndPrintFile(const char name)", "acts like before doing auto bed. Please help me solve this. I'm using", "printer does auto bedding two* times but when print starts the auto bedding", "printer acts like before doing auto bed. Please help me solve this. I'm", "= &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` and changed", "`cardreader.cpp` ``` void CardReader::openAndPrintFile(const char name) { char cmd[4 + strlen(name) + 1];", "print, the printer does auto bedding two times but when print starts the", "= tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` and changed it to ``` void CardReader::openAndPrintFile(const", "enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` Now before each print, the printer does auto bedding", "c = &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` and", "changed it to ``` void CardReader::openAndPrintFile(const char name) { char cmd[4 + strlen(name)", "c = &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); }", "(char c = &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ```", "starts the auto bedding is ignored and printer acts like before doing auto", "name); for (char c = &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\");", "= &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ```", "Now before each print, the printer does auto bedding two* times but when", "before each print. When I enable auto bed level in `configuration.h`, it only", "for \"M23 \", filename, and null sprintf_P(cmd, PSTR(\"M23 %s\"), name); for (char c", "enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` Now before each print, the printer does auto", "filename, and null sprintf_P(cmd, PSTR(\"M23 %s\"), name); for (char c = &cmd[4]; c;", "``` and changed it to ``` void CardReader::openAndPrintFile(const char name) { char cmd[4", "each print. When I enable auto bed level in `configuration.h`, it only shows", "c; c++) c = tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` Now before", "auto bed leveling before each print. When I enable auto bed level in", "&cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` Now", "it to ``` void CardReader::openAndPrintFile(const char name) { char cmd[4 + strlen(name) +", "I found this code in `cardreader.cpp` ``` void CardReader::openAndPrintFile(const char name) { char", "enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` and changed it to ``` void CardReader::openAndPrintFile(const char name) {", "= tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` Now before each print, the", "times but when print starts the auto bedding is ignored and printer acts", "CardReader::openAndPrintFile(const char name) { char cmd[4 + strlen(name) + 1]; // Room for", "and printer acts like before doing auto bed. Please help me solve this.", "add auto bed leveling before each print. When I enable auto bed level", "auto bedding two* times but when print starts the auto bedding is ignored", "sprintf_P(cmd, PSTR(\"M23 %s\"), name); for (char c = &cmd[4]; c; c++) c =", "enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` Now before each print, the printer does auto bedding two", "auto bed level in `configuration.h`, it only shows auto bed* in menu. I", "print starts the auto bedding is ignored and printer acts like before doing", "&cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` and changed it", "in `cardreader.cpp` ``` void CardReader::openAndPrintFile(const char name) { char cmd[4 + strlen(name) +", "tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` and changed it to ``` void CardReader::openAndPrintFile(const char", "bed level in `configuration.h`, it only shows auto bed* in menu. I found", "for (char c = &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); }", "before doing auto bed. Please help me solve this. I'm using Marlin Firmware", "this code in `cardreader.cpp` ``` void CardReader::openAndPrintFile(const char name) { char cmd[4 +", "{ char cmd[4 + strlen(name) + 1]; // Room for \"M23 \", filename,", "and null sprintf_P(cmd, PSTR(\"M23 %s\"), name); for (char c = &cmd[4]; c; c++)", "the printer does auto bedding two* times but when print starts the auto", "menu. I found this code in `cardreader.cpp` ``` void CardReader::openAndPrintFile(const char name) {", "%s\"), name); for (char c = &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(cmd);", "``` Now before each print, the printer does auto bedding two* times but", "does auto bedding two times but when print starts the auto bedding is", "like before doing auto bed. Please help me solve this. I'm using Marlin", "\"M23 \", filename, and null sprintf_P(cmd, PSTR(\"M23 %s\"), name); for (char c =", "strlen(name) + 1]; // Room for \"M23 \", filename, and null sprintf_P(cmd, PSTR(\"M23", "void CardReader::openAndPrintFile(const char name) { char cmd[4 + strlen(name) + 1]; // Room", "I want to add auto bed leveling before each print. When I enable", "print. When I enable auto bed level in `configuration.h`, it only shows *auto", "(char c = &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\"));", "in menu. I found this code in `cardreader.cpp` ``` void CardReader::openAndPrintFile(const char name)", "enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` Now before each print, the printer does", "for (char c = &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd);", "doing auto bed. Please help me solve this. I'm using Marlin Firmware 1.1.0.", "code in `cardreader.cpp` ``` void CardReader::openAndPrintFile(const char name) { char cmd[4 + strlen(name)", "PSTR(\"M23 %s\"), name); for (char c = &cmd[4]; c; c++) c = tolower(c);", "Room for \"M23 \", filename, and null sprintf_P(cmd, PSTR(\"M23 %s\"), name); for (char", "want to add auto bed leveling before each print. When I enable auto", "before each print, the printer does auto bedding two* times but when print", "is ignored and printer acts like before doing auto bed. Please help me", "// Room for \"M23 \", filename, and null sprintf_P(cmd, PSTR(\"M23 %s\"), name); for", "cmd[4 + strlen(name) + 1]; // Room for \"M23 \", filename, and null", "When I enable auto bed level in `configuration.h`, it only shows auto bed", "c++) c = tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` Now before each", "bed leveling before each print. When I enable auto bed level in `configuration.h`,", "to add auto bed leveling before each print. When I enable auto bed", "+ strlen(name) + 1]; // Room for \"M23 \", filename, and null sprintf_P(cmd,", "char cmd[4 + strlen(name) + 1]; // Room for \"M23 \", filename, and", "and changed it to ``` void CardReader::openAndPrintFile(const char name) { char cmd[4 +", "level in `configuration.h`, it only shows auto bed* in menu. I found this", "found this code in `cardreader.cpp` ``` void CardReader::openAndPrintFile(const char name) { char cmd[4", "only shows auto bed* in menu. I found this code in `cardreader.cpp` ```", "1]; // Room for \"M23 \", filename, and null sprintf_P(cmd, PSTR(\"M23 %s\"), name);", "c; c++) c = tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` and changed it to", "two* times but when print starts the auto bedding is ignored and printer", "} ``` and changed it to ``` void CardReader::openAndPrintFile(const char name) { char", "enable auto bed level in `configuration.h`, it only shows auto bed* in menu.", "leveling before each print. When I enable auto bed level in `configuration.h`, it", "c = tolower(c); enqueue_and_echo_command(\"G28\"); enqueue_and_echo_command(\"G29\"); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` Now before each print,", "the auto bedding is ignored and printer acts like before doing auto bed.", "shows auto bed in menu. I found this code in `cardreader.cpp` ``` void", "each print, the printer does auto bedding two times but when print starts", "to ``` void CardReader::openAndPrintFile(const char name) { char cmd[4 + strlen(name) + 1];", "bed* in menu. I found this code in `cardreader.cpp` ``` void CardReader::openAndPrintFile(const char", "name) { char cmd[4 + strlen(name) + 1]; // Room for \"M23 \",", "`configuration.h`, it only shows auto bed* in menu. I found this code in", "I enable auto bed level in `configuration.h`, it only shows auto bed in", "char name) { char cmd[4 + strlen(name) + 1]; // Room for \"M23", "\", filename, and null sprintf_P(cmd, PSTR(\"M23 %s\"), name); for (char c = &cmd[4];", "c = tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` and changed it to ``` void", "bedding is ignored and printer acts like before doing auto bed. Please help", "+ 1]; // Room for \"M23 \", filename, and null sprintf_P(cmd, PSTR(\"M23 %s\"),", "in `configuration.h`, it only shows auto bed in menu. I found this code", "auto bed in menu. I found this code in `cardreader.cpp` ``` void CardReader::openAndPrintFile(const", "bedding two times but when print starts the auto bedding is ignored and", "c++) c = tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\")); } ``` and changed it to ```", "ignored and printer acts like before doing auto bed. Please help me solve", "but when print starts the auto bedding is ignored and printer acts like", "name); for (char c = &cmd[4]; c; c++) c = tolower(c); enqueue_and_echo_command(cmd); enqueue_and_echo_commands_P(PSTR(\"M24\"));" ]
[ "right in assuming that all I need is to make my own filament", "assuming that all I need is to make my own filament and set", "printer that is capable of it? Am I right in assuming that all", "Is there a reasonably priced 3d printer that is capable of it? Am", "like to start 3d printing in wax. Is there a reasonably priced 3d", "my own filament and set extruder temperature correctly, or do I miss something?", "capable of it? Am I right in assuming that all I need is", "I need is to make my own filament and set extruder temperature correctly,", "reasonably priced 3d printer that is capable of it? Am I right in", "in assuming that all I need is to make my own filament and", "priced 3d printer that is capable of it? Am I right in assuming", "Am I right in assuming that all I need is to make my", "3d printing in wax. Is there a reasonably priced 3d printer that is", "all I need is to make my own filament and set extruder temperature", "printing in wax. Is there a reasonably priced 3d printer that is capable", "it? Am I right in assuming that all I need is to make", "is capable of it? Am I right in assuming that all I need", "wax. Is there a reasonably priced 3d printer that is capable of it?", "start 3d printing in wax. Is there a reasonably priced 3d printer that", "to start 3d printing in wax. Is there a reasonably priced 3d printer", "I'd like to start 3d printing in wax. Is there a reasonably priced", "that all I need is to make my own filament and set extruder", "3d printer that is capable of it? Am I right in assuming that", "is to make my own filament and set extruder temperature correctly, or do", "make my own filament and set extruder temperature correctly, or do I miss", "to make my own filament and set extruder temperature correctly, or do I", "I right in assuming that all I need is to make my own", "need is to make my own filament and set extruder temperature correctly, or", "a reasonably priced 3d printer that is capable of it? Am I right", "of it? Am I right in assuming that all I need is to", "there a reasonably priced 3d printer that is capable of it? Am I", "in wax. Is there a reasonably priced 3d printer that is capable of", "that is capable of it? Am I right in assuming that all I" ]
[ "G130 X118 Y118 A118 B118 ; set stepper motor Vref to defaults ;", "to slice then post process with GPX. I did a lot of searching", "Y70 E15 F1200.000 ; extrude a line of filament along the right edge", "slicer's next extrusion is relative to this 0 ; ; Sliced at: {day}", "F3300 ; move to waiting position M116 ; wait for temps ; ;", "move to waiting position M116 ; wait for temps ; ; purge and", "for this particular printer. The only catch is that his code only works", "let the Z stepper vref stay at eeprom level (probably 40) ; ;", "The only catch is that his code only works on version 15.04. Don't", "vref stay at eeprom level (probably 40) ; ; home and recall eeprom", "all coords to 0 for now G1 Z5 F500 ; move Z 5mm", "on the right nozzle G28 X Y Z ; home all axes at", "for XYZ axes ; ; wait for heat up G1 X110 Y-72 Z30", "eeprom home position T0 ; home on the right nozzle G28 X Y", "homing speed G92 X0 Y0 Z0 A0 B0 ; set all coords to", "at eeprom level (probably 40) ; ; home and recall eeprom home position", "Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ; Print time: {print_time} ; Filament", "F500 ; move Z 5mm away so we can carefully hit the limit", "who posted their start and end G-code for this particular printer. The only", "that his code only works on version 15.04. Don't get me wrong, 15.04", "{filament_weight}g ; Filament cost: {filament_cost} ; -- end of START GCODE -- ```", "at homing speed G92 X0 Y0 Z0 A0 B0 ; set all coords", "extrusion is relative to this 0 ; ; Sliced at: {day} {date} {time}", "the bed G92 E0 ; set E to 0 again because the slicer's", "bed G1 X110 Y70 E15 F1200.000 ; extrude a line of filament along", "time: {print_time} ; Filament used: {filament_amount}m {filament_weight}g ; Filament cost: {filament_cost} ; --", "edge of the bed G92 E0 ; set E to 0 again because", "a Monoprice architect which is a barebones clone of the FlashForge Creator Pro,", "post process with GPX. I did a lot of searching and finally found", "a heated bed and, after getting fed up with MakerBot software, I've started", "we can carefully hit the limit switch G161 Z F100 ; home Z", "; extrude a line of filament along the right edge of the bed", "Dual. I have upgraded the power supply and added a heated bed and,", "bed and, after getting fed up with MakerBot software, I've started using Cura", "have tried it in 2.5 with error in post processing. Any help is", "coords to 0 for now G1 Z5 F500 ; move Z 5mm away", "stay at eeprom level (probably 40) ; ; home and recall eeprom home", "; home Z slowly M132 X Y Z ; recall stored home offsets", "wipe G92 E0 ; set current extruder position as 0 so that E15", "{print_time} ; Filament used: {filament_amount}m {filament_weight}g ; Filament cost: {filament_cost} ; -- end", "of the bed G92 E0 ; set E to 0 again because the", "P0 G90 ; absolute coordinates ; ; set temperatures and assert Vref M140", "; start build M73 P0 G90 ; absolute coordinates ; ; set temperatures", "switch G161 Z F100 ; home Z slowly M132 X Y Z ;", "works on version 15.04. Don't get me wrong, 15.04 is a huge upgrade", "to 0 for now G1 Z5 F500 ; move Z 5mm away so", "Y118 A118 B118 ; set stepper motor Vref to defaults ; let the", "I would really like to start using a newer version like 2.5 or", "Z ; home all axes at homing speed G92 X0 Y0 Z0 A0", "help is appreciated!! ``` ; -- START GCODE -- M136 ; start build", "; home on the right nozzle G28 X Y Z ; home all", "move Z 5mm away so we can carefully hit the limit switch G161", "all axes at homing speed G92 X0 Y0 Z0 A0 B0 ; set", "newer version like 2.5 or anything relatively new. Here is the start code", "0 ; ; Sliced at: {day} {date} {time} ; Basic settings: Layer height:", "0 so that E15 below makes sense G1 X110 Y-70 Z0.2 F2400.0 ;", "so we can carefully hit the limit switch G161 Z F100 ; home", "X Y Z ; recall stored home offsets for XYZ axes ; ;", "slowly M132 X Y Z ; recall stored home offsets for XYZ axes", "a barebones clone of the FlashForge Creator Pro, or Replicator 1 Dual. I", "used: {filament_amount}m {filament_weight}g ; Filament cost: {filament_cost} ; -- end of START GCODE", "GPX. I did a lot of searching and finally found someone who posted", "G92 E0 ; set current extruder position as 0 so that E15 below", "; wait for temps ; ; purge and wipe G92 E0 ; set", "to just on the bed G1 X110 Y70 E15 F1200.000 ; extrude a", "along the right edge of the bed G92 E0 ; set E to", "get me wrong, 15.04 is a huge upgrade compared to MakerWare. But, I", "as 0 so that E15 below makes sense G1 X110 Y-70 Z0.2 F2400.0", "GCODE -- M136 ; start build M73 P0 G90 ; absolute coordinates ;", "Cura to slice then post process with GPX. I did a lot of", "M136 ; start build M73 P0 G90 ; absolute coordinates ; ; set", "me wrong, 15.04 is a huge upgrade compared to MakerWare. But, I would", "Replicator 1 Dual. I have upgraded the power supply and added a heated", "the power supply and added a heated bed and, after getting fed up", "Don't get me wrong, 15.04 is a huge upgrade compared to MakerWare. But,", "G-code for this particular printer. The only catch is that his code only", "nozzle G28 X Y Z ; home all axes at homing speed G92", "found. I have tried it in 2.5 with error in post processing. Any", "is appreciated!! ``` ; -- START GCODE -- M136 ; start build M73", "move to just on the bed G1 X110 Y70 E15 F1200.000 ; extrude", "XYZ axes ; ; wait for heat up G1 X110 Y-72 Z30 F3300", "coordinates ; ; set temperatures and assert Vref M140 S{print_bed_temperature} M104 S{print_temperature} T0", "of searching and finally found someone who posted their start and end G-code", "T0 ; home on the right nozzle G28 X Y Z ; home", "X110 Y-72 Z30 F3300 ; move to waiting position M116 ; wait for", "is a barebones clone of the FlashForge Creator Pro, or Replicator 1 Dual.", "X110 Y70 E15 F1200.000 ; extrude a line of filament along the right", "and wipe G92 E0 ; set current extruder position as 0 so that", "; Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ; Print time:", "; move to just on the bed G1 X110 Y70 E15 F1200.000 ;", "set temperatures and assert Vref M140 S{print_bed_temperature} M104 S{print_temperature} T0 G130 X118 Y118", "home position T0 ; home on the right nozzle G28 X Y Z", "it in 2.5 with error in post processing. Any help is appreciated!! ```", "post processing. Any help is appreciated!! ``` ; -- START GCODE -- M136", "; -- START GCODE -- M136 ; start build M73 P0 G90 ;", "; move to waiting position M116 ; wait for temps ; ; purge", "processing. Any help is appreciated!! ``` ; -- START GCODE -- M136 ;", "upgrade compared to MakerWare. But, I would really like to start using a", "{fill_density} ; Print time: {print_time} ; Filament used: {filament_amount}m {filament_weight}g ; Filament cost:", "extruder position as 0 so that E15 below makes sense G1 X110 Y-70", "this particular printer. The only catch is that his code only works on", "with error in post processing. Any help is appreciated!! ``` ; -- START", "someone who posted their start and end G-code for this particular printer. The", "; home and recall eeprom home position T0 ; home on the right", "M132 X Y Z ; recall stored home offsets for XYZ axes ;", "set current extruder position as 0 so that E15 below makes sense G1", "recall eeprom home position T0 ; home on the right nozzle G28 X", "MakerBot software, I've started using Cura to slice then post process with GPX.", "temperatures and assert Vref M140 S{print_bed_temperature} M104 S{print_temperature} T0 G130 X118 Y118 A118", "home all axes at homing speed G92 X0 Y0 Z0 A0 B0 ;", "in post processing. Any help is appreciated!! ``` ; -- START GCODE --", "just on the bed G1 X110 Y70 E15 F1200.000 ; extrude a line", "X110 Y-70 Z0.2 F2400.0 ; move to just on the bed G1 X110", "T0 G130 X118 Y118 A118 B118 ; set stepper motor Vref to defaults", "S{print_bed_temperature} M104 S{print_temperature} T0 G130 X118 Y118 A118 B118 ; set stepper motor", "stored home offsets for XYZ axes ; ; wait for heat up G1", "version 15.04. Don't get me wrong, 15.04 is a huge upgrade compared to", "only works on version 15.04. Don't get me wrong, 15.04 is a huge", "for now G1 Z5 F500 ; move Z 5mm away so we can", "particular printer. The only catch is that his code only works on version", "limit switch G161 Z F100 ; home Z slowly M132 X Y Z", "to start using a newer version like 2.5 or anything relatively new. Here", "temps ; ; purge and wipe G92 E0 ; set current extruder position", "position M116 ; wait for temps ; ; purge and wipe G92 E0", "; purge and wipe G92 E0 ; set current extruder position as 0", "up with MakerBot software, I've started using Cura to slice then post process", "because the slicer's next extrusion is relative to this 0 ; ; Sliced", "Y-72 Z30 F3300 ; move to waiting position M116 ; wait for temps", "Y Z ; home all axes at homing speed G92 X0 Y0 Z0", "for temps ; ; purge and wipe G92 E0 ; set current extruder", "motor Vref to defaults ; let the Z stepper vref stay at eeprom", "waiting position M116 ; wait for temps ; ; purge and wipe G92", "a line of filament along the right edge of the bed G92 E0", "on the bed G1 X110 Y70 E15 F1200.000 ; extrude a line of", "the FlashForge Creator Pro, or Replicator 1 Dual. I have upgraded the power", "But, I would really like to start using a newer version like 2.5", "software, I've started using Cura to slice then post process with GPX. I", "barebones clone of the FlashForge Creator Pro, or Replicator 1 Dual. I have", "Z0 A0 B0 ; set all coords to 0 for now G1 Z5", "I have upgraded the power supply and added a heated bed and, after", "slice then post process with GPX. I did a lot of searching and", "; set E to 0 again because the slicer's next extrusion is relative", "like to start using a newer version like 2.5 or anything relatively new.", "; move Z 5mm away so we can carefully hit the limit switch", "G92 E0 ; set E to 0 again because the slicer's next extrusion", "the start code I found. I have tried it in 2.5 with error", "next extrusion is relative to this 0 ; ; Sliced at: {day} {date}", "B118 ; set stepper motor Vref to defaults ; let the Z stepper", "Z 5mm away so we can carefully hit the limit switch G161 Z", "Walls: {wall_thickness} Fill: {fill_density} ; Print time: {print_time} ; Filament used: {filament_amount}m {filament_weight}g", "M104 S{print_temperature} T0 G130 X118 Y118 A118 B118 ; set stepper motor Vref", "; ; set temperatures and assert Vref M140 S{print_bed_temperature} M104 S{print_temperature} T0 G130", "2.5 with error in post processing. Any help is appreciated!! ``` ; --", "is a huge upgrade compared to MakerWare. But, I would really like to", "only catch is that his code only works on version 15.04. Don't get", "the Z stepper vref stay at eeprom level (probably 40) ; ; home", "-- M136 ; start build M73 P0 G90 ; absolute coordinates ; ;", "Vref to defaults ; let the Z stepper vref stay at eeprom level", "E to 0 again because the slicer's next extrusion is relative to this", "lot of searching and finally found someone who posted their start and end", "is the start code I found. I have tried it in 2.5 with", "his code only works on version 15.04. Don't get me wrong, 15.04 is", "have upgraded the power supply and added a heated bed and, after getting", "version like 2.5 or anything relatively new. Here is the start code I", "B0 ; set all coords to 0 for now G1 Z5 F500 ;", "the slicer's next extrusion is relative to this 0 ; ; Sliced at:", "position as 0 so that E15 below makes sense G1 X110 Y-70 Z0.2", "wrong, 15.04 is a huge upgrade compared to MakerWare. But, I would really", "like 2.5 or anything relatively new. Here is the start code I found.", "E0 ; set current extruder position as 0 so that E15 below makes", "E15 below makes sense G1 X110 Y-70 Z0.2 F2400.0 ; move to just", "start build M73 P0 G90 ; absolute coordinates ; ; set temperatures and", "start and end G-code for this particular printer. The only catch is that", "hit the limit switch G161 Z F100 ; home Z slowly M132 X", "{time} ; Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ; Print", "X Y Z ; home all axes at homing speed G92 X0 Y0", "build M73 P0 G90 ; absolute coordinates ; ; set temperatures and assert", "posted their start and end G-code for this particular printer. The only catch", "error in post processing. Any help is appreciated!! ``` ; -- START GCODE", "Z F100 ; home Z slowly M132 X Y Z ; recall stored", "and added a heated bed and, after getting fed up with MakerBot software,", "; set temperatures and assert Vref M140 S{print_bed_temperature} M104 S{print_temperature} T0 G130 X118", "getting fed up with MakerBot software, I've started using Cura to slice then", "home Z slowly M132 X Y Z ; recall stored home offsets for", "supply and added a heated bed and, after getting fed up with MakerBot", "is that his code only works on version 15.04. Don't get me wrong,", "and recall eeprom home position T0 ; home on the right nozzle G28", "FlashForge Creator Pro, or Replicator 1 Dual. I have upgraded the power supply", "A118 B118 ; set stepper motor Vref to defaults ; let the Z", "height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ; Print time: {print_time} ; Filament used:", "searching and finally found someone who posted their start and end G-code for", "F100 ; home Z slowly M132 X Y Z ; recall stored home", "relative to this 0 ; ; Sliced at: {day} {date} {time} ; Basic", "below makes sense G1 X110 Y-70 Z0.2 F2400.0 ; move to just on", "15.04. Don't get me wrong, 15.04 is a huge upgrade compared to MakerWare.", "wait for heat up G1 X110 Y-72 Z30 F3300 ; move to waiting", "found someone who posted their start and end G-code for this particular printer.", "now G1 Z5 F500 ; move Z 5mm away so we can carefully", "and finally found someone who posted their start and end G-code for this", "using Cura to slice then post process with GPX. I did a lot", "can carefully hit the limit switch G161 Z F100 ; home Z slowly", "Z ; recall stored home offsets for XYZ axes ; ; wait for", "Z0.2 F2400.0 ; move to just on the bed G1 X110 Y70 E15", "Creator Pro, or Replicator 1 Dual. I have upgraded the power supply and", "away so we can carefully hit the limit switch G161 Z F100 ;", "new. Here is the start code I found. I have tried it in", "filament along the right edge of the bed G92 E0 ; set E", "Z5 F500 ; move Z 5mm away so we can carefully hit the", "their start and end G-code for this particular printer. The only catch is", "heat up G1 X110 Y-72 Z30 F3300 ; move to waiting position M116", "process with GPX. I did a lot of searching and finally found someone", "after getting fed up with MakerBot software, I've started using Cura to slice", "; home all axes at homing speed G92 X0 Y0 Z0 A0 B0", "0 for now G1 Z5 F500 ; move Z 5mm away so we", "; recall stored home offsets for XYZ axes ; ; wait for heat", "end G-code for this particular printer. The only catch is that his code", "G1 X110 Y-70 Z0.2 F2400.0 ; move to just on the bed G1", "I have tried it in 2.5 with error in post processing. Any help", "printer. The only catch is that his code only works on version 15.04.", "heated bed and, after getting fed up with MakerBot software, I've started using", "{layer_height} Walls: {wall_thickness} Fill: {fill_density} ; Print time: {print_time} ; Filament used: {filament_amount}m", "G1 Z5 F500 ; move Z 5mm away so we can carefully hit", "makes sense G1 X110 Y-70 Z0.2 F2400.0 ; move to just on the", "architect which is a barebones clone of the FlashForge Creator Pro, or Replicator", "assert Vref M140 S{print_bed_temperature} M104 S{print_temperature} T0 G130 X118 Y118 A118 B118 ;", "-- START GCODE -- M136 ; start build M73 P0 G90 ; absolute", "eeprom level (probably 40) ; ; home and recall eeprom home position T0", "in 2.5 with error in post processing. Any help is appreciated!! ``` ;", "{date} {time} ; Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;", "; ; home and recall eeprom home position T0 ; home on the", "home on the right nozzle G28 X Y Z ; home all axes", "right edge of the bed G92 E0 ; set E to 0 again", "would really like to start using a newer version like 2.5 or anything", "I've started using Cura to slice then post process with GPX. I did", "or Replicator 1 Dual. I have upgraded the power supply and added a", "recall stored home offsets for XYZ axes ; ; wait for heat up", "5mm away so we can carefully hit the limit switch G161 Z F100", "{day} {date} {time} ; Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}", "Z30 F3300 ; move to waiting position M116 ; wait for temps ;", "G1 X110 Y-72 Z30 F3300 ; move to waiting position M116 ; wait", "Y0 Z0 A0 B0 ; set all coords to 0 for now G1", "huge upgrade compared to MakerWare. But, I would really like to start using", "M73 P0 G90 ; absolute coordinates ; ; set temperatures and assert Vref", "Y-70 Z0.2 F2400.0 ; move to just on the bed G1 X110 Y70", "position T0 ; home on the right nozzle G28 X Y Z ;", "; ; wait for heat up G1 X110 Y-72 Z30 F3300 ; move", "G90 ; absolute coordinates ; ; set temperatures and assert Vref M140 S{print_bed_temperature}", "upgraded the power supply and added a heated bed and, after getting fed", "X118 Y118 A118 B118 ; set stepper motor Vref to defaults ; let", "; ; purge and wipe G92 E0 ; set current extruder position as", "have a Monoprice architect which is a barebones clone of the FlashForge Creator", "the right nozzle G28 X Y Z ; home all axes at homing", "{wall_thickness} Fill: {fill_density} ; Print time: {print_time} ; Filament used: {filament_amount}m {filament_weight}g ;", "with GPX. I did a lot of searching and finally found someone who", "S{print_temperature} T0 G130 X118 Y118 A118 B118 ; set stepper motor Vref to", "M116 ; wait for temps ; ; purge and wipe G92 E0 ;", "a lot of searching and finally found someone who posted their start and", "up G1 X110 Y-72 Z30 F3300 ; move to waiting position M116 ;", "on version 15.04. Don't get me wrong, 15.04 is a huge upgrade compared", "then post process with GPX. I did a lot of searching and finally", "using a newer version like 2.5 or anything relatively new. Here is the", "bed G92 E0 ; set E to 0 again because the slicer's next", "to MakerWare. But, I would really like to start using a newer version", "the right edge of the bed G92 E0 ; set E to 0", "I have a Monoprice architect which is a barebones clone of the FlashForge", "Print time: {print_time} ; Filament used: {filament_amount}m {filament_weight}g ; Filament cost: {filament_cost} ;", "settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ; Print time: {print_time} ;", "appreciated!! ``` ; -- START GCODE -- M136 ; start build M73 P0", "and, after getting fed up with MakerBot software, I've started using Cura to", "Sliced at: {day} {date} {time} ; Basic settings: Layer height: {layer_height} Walls: {wall_thickness}", "Fill: {fill_density} ; Print time: {print_time} ; Filament used: {filament_amount}m {filament_weight}g ; Filament", "code only works on version 15.04. Don't get me wrong, 15.04 is a", "to defaults ; let the Z stepper vref stay at eeprom level (probably", "anything relatively new. Here is the start code I found. I have tried", "X0 Y0 Z0 A0 B0 ; set all coords to 0 for now", "line of filament along the right edge of the bed G92 E0 ;", "catch is that his code only works on version 15.04. Don't get me", "set all coords to 0 for now G1 Z5 F500 ; move Z", "power supply and added a heated bed and, after getting fed up with", "; absolute coordinates ; ; set temperatures and assert Vref M140 S{print_bed_temperature} M104", "axes ; ; wait for heat up G1 X110 Y-72 Z30 F3300 ;", "this 0 ; ; Sliced at: {day} {date} {time} ; Basic settings: Layer", "started using Cura to slice then post process with GPX. I did a", "F2400.0 ; move to just on the bed G1 X110 Y70 E15 F1200.000", "E15 F1200.000 ; extrude a line of filament along the right edge of", "G92 X0 Y0 Z0 A0 B0 ; set all coords to 0 for", "{filament_amount}m {filament_weight}g ; Filament cost: {filament_cost} ; -- end of START GCODE --", "code I found. I have tried it in 2.5 with error in post", "MakerWare. But, I would really like to start using a newer version like", "40) ; ; home and recall eeprom home position T0 ; home on", "1 Dual. I have upgraded the power supply and added a heated bed", "E0 ; set E to 0 again because the slicer's next extrusion is", "; Filament used: {filament_amount}m {filament_weight}g ; Filament cost: {filament_cost} ; -- end of", "did a lot of searching and finally found someone who posted their start", "home and recall eeprom home position T0 ; home on the right nozzle", "; set stepper motor Vref to defaults ; let the Z stepper vref", "Any help is appreciated!! ``` ; -- START GCODE -- M136 ; start", "G1 X110 Y70 E15 F1200.000 ; extrude a line of filament along the", "set E to 0 again because the slicer's next extrusion is relative to", "to this 0 ; ; Sliced at: {day} {date} {time} ; Basic settings:", "so that E15 below makes sense G1 X110 Y-70 Z0.2 F2400.0 ; move", "is relative to this 0 ; ; Sliced at: {day} {date} {time} ;", "right nozzle G28 X Y Z ; home all axes at homing speed", "start code I found. I have tried it in 2.5 with error in", "the bed G1 X110 Y70 E15 F1200.000 ; extrude a line of filament", "offsets for XYZ axes ; ; wait for heat up G1 X110 Y-72", "extrude a line of filament along the right edge of the bed G92", "A0 B0 ; set all coords to 0 for now G1 Z5 F500", "; Sliced at: {day} {date} {time} ; Basic settings: Layer height: {layer_height} Walls:", "0 again because the slicer's next extrusion is relative to this 0 ;", "which is a barebones clone of the FlashForge Creator Pro, or Replicator 1", "Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ; Print time: {print_time}", "G28 X Y Z ; home all axes at homing speed G92 X0", "of the FlashForge Creator Pro, or Replicator 1 Dual. I have upgraded the", "home offsets for XYZ axes ; ; wait for heat up G1 X110", "Z slowly M132 X Y Z ; recall stored home offsets for XYZ", "Monoprice architect which is a barebones clone of the FlashForge Creator Pro, or", "START GCODE -- M136 ; start build M73 P0 G90 ; absolute coordinates", "really like to start using a newer version like 2.5 or anything relatively", "sense G1 X110 Y-70 Z0.2 F2400.0 ; move to just on the bed", "; ; Sliced at: {day} {date} {time} ; Basic settings: Layer height: {layer_height}", "compared to MakerWare. But, I would really like to start using a newer", "; set current extruder position as 0 so that E15 below makes sense", "with MakerBot software, I've started using Cura to slice then post process with", "at: {day} {date} {time} ; Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill:", "stepper vref stay at eeprom level (probably 40) ; ; home and recall", "wait for temps ; ; purge and wipe G92 E0 ; set current", "I did a lot of searching and finally found someone who posted their", "of filament along the right edge of the bed G92 E0 ; set", "clone of the FlashForge Creator Pro, or Replicator 1 Dual. I have upgraded", "speed G92 X0 Y0 Z0 A0 B0 ; set all coords to 0", "to waiting position M116 ; wait for temps ; ; purge and wipe", "current extruder position as 0 so that E15 below makes sense G1 X110", "F1200.000 ; extrude a line of filament along the right edge of the", "Pro, or Replicator 1 Dual. I have upgraded the power supply and added", "Y Z ; recall stored home offsets for XYZ axes ; ; wait", "absolute coordinates ; ; set temperatures and assert Vref M140 S{print_bed_temperature} M104 S{print_temperature}", "set stepper motor Vref to defaults ; let the Z stepper vref stay", "2.5 or anything relatively new. Here is the start code I found. I", "the limit switch G161 Z F100 ; home Z slowly M132 X Y", "axes at homing speed G92 X0 Y0 Z0 A0 B0 ; set all", "G161 Z F100 ; home Z slowly M132 X Y Z ; recall", "and end G-code for this particular printer. The only catch is that his", "purge and wipe G92 E0 ; set current extruder position as 0 so", "defaults ; let the Z stepper vref stay at eeprom level (probably 40)", "; let the Z stepper vref stay at eeprom level (probably 40) ;", "; set all coords to 0 for now G1 Z5 F500 ; move", "relatively new. Here is the start code I found. I have tried it", "(probably 40) ; ; home and recall eeprom home position T0 ; home", "start using a newer version like 2.5 or anything relatively new. Here is", "15.04 is a huge upgrade compared to MakerWare. But, I would really like", "or anything relatively new. Here is the start code I found. I have", "that E15 below makes sense G1 X110 Y-70 Z0.2 F2400.0 ; move to", "level (probably 40) ; ; home and recall eeprom home position T0 ;", "I found. I have tried it in 2.5 with error in post processing.", "stepper motor Vref to defaults ; let the Z stepper vref stay at", "``` ; -- START GCODE -- M136 ; start build M73 P0 G90", "M140 S{print_bed_temperature} M104 S{print_temperature} T0 G130 X118 Y118 A118 B118 ; set stepper", "tried it in 2.5 with error in post processing. Any help is appreciated!!", "to 0 again because the slicer's next extrusion is relative to this 0", "and assert Vref M140 S{print_bed_temperature} M104 S{print_temperature} T0 G130 X118 Y118 A118 B118", "a huge upgrade compared to MakerWare. But, I would really like to start", "fed up with MakerBot software, I've started using Cura to slice then post", "; wait for heat up G1 X110 Y-72 Z30 F3300 ; move to", "carefully hit the limit switch G161 Z F100 ; home Z slowly M132", "Z stepper vref stay at eeprom level (probably 40) ; ; home and", "Vref M140 S{print_bed_temperature} M104 S{print_temperature} T0 G130 X118 Y118 A118 B118 ; set", "Filament used: {filament_amount}m {filament_weight}g ; Filament cost: {filament_cost} ; -- end of START", "a newer version like 2.5 or anything relatively new. Here is the start", "for heat up G1 X110 Y-72 Z30 F3300 ; move to waiting position", "finally found someone who posted their start and end G-code for this particular", "; Print time: {print_time} ; Filament used: {filament_amount}m {filament_weight}g ; Filament cost: {filament_cost}", "again because the slicer's next extrusion is relative to this 0 ; ;", "added a heated bed and, after getting fed up with MakerBot software, I've", "Here is the start code I found. I have tried it in 2.5" ]
[ "scale it down to 1/87 model (in SketchUp). When I send the model", "the model to my 3D printer (with Cura 2.4) some parts of the", "model of a signaling post (trains) where I scale it down to 1/87", "are lost in translation even when their dimensions exceed the printer minimal dimension", "mm. Is this a known problem of Cura or is something else at", "of the model are lost in translation even when their dimensions exceed the", "parts of the model are lost in translation even when their dimensions exceed", "I scale it down to 1/87 model (in SketchUp). When I send the", "to my 3D printer (with Cura 2.4) some parts of the model are", "when their dimensions exceed the printer minimal dimension of 0.7 mm. Is this", "send the model to my 3D printer (with Cura 2.4) some parts of", "post (trains) where I scale it down to 1/87 model (in SketchUp). When", "minimal dimension of 0.7 mm. Is this a known problem of Cura or", "their dimensions exceed the printer minimal dimension of 0.7 mm. Is this a", "signaling post (trains) where I scale it down to 1/87 model (in SketchUp).", "3D printer (with Cura 2.4) some parts of the model are lost in", "some parts of the model are lost in translation even when their dimensions", "a life size model of a signaling post (trains) where I scale it", "it down to 1/87 model (in SketchUp). When I send the model to", "where I scale it down to 1/87 model (in SketchUp). When I send", "a signaling post (trains) where I scale it down to 1/87 model (in", "to 1/87 model (in SketchUp). When I send the model to my 3D", "even when their dimensions exceed the printer minimal dimension of 0.7 mm. Is", "of 0.7 mm. Is this a known problem of Cura or is something", "1/87 model (in SketchUp). When I send the model to my 3D printer", "(in SketchUp). When I send the model to my 3D printer (with Cura", "in translation even when their dimensions exceed the printer minimal dimension of 0.7", "down to 1/87 model (in SketchUp). When I send the model to my", "model are lost in translation even when their dimensions exceed the printer minimal", "printer minimal dimension of 0.7 mm. Is this a known problem of Cura", "I got a life size model of a signaling post (trains) where I", "exceed the printer minimal dimension of 0.7 mm. Is this a known problem", "my 3D printer (with Cura 2.4) some parts of the model are lost", "Is this a known problem of Cura or is something else at hand?", "printer (with Cura 2.4) some parts of the model are lost in translation", "the printer minimal dimension of 0.7 mm. Is this a known problem of", "translation even when their dimensions exceed the printer minimal dimension of 0.7 mm.", "0.7 mm. Is this a known problem of Cura or is something else", "life size model of a signaling post (trains) where I scale it down", "of a signaling post (trains) where I scale it down to 1/87 model", "got a life size model of a signaling post (trains) where I scale", "the model are lost in translation even when their dimensions exceed the printer", "dimension of 0.7 mm. Is this a known problem of Cura or is", "size model of a signaling post (trains) where I scale it down to", "lost in translation even when their dimensions exceed the printer minimal dimension of", "model (in SketchUp). When I send the model to my 3D printer (with", "model to my 3D printer (with Cura 2.4) some parts of the model", "Cura 2.4) some parts of the model are lost in translation even when", "2.4) some parts of the model are lost in translation even when their", "dimensions exceed the printer minimal dimension of 0.7 mm. Is this a known", "(trains) where I scale it down to 1/87 model (in SketchUp). When I", "SketchUp). When I send the model to my 3D printer (with Cura 2.4)", "When I send the model to my 3D printer (with Cura 2.4) some", "I send the model to my 3D printer (with Cura 2.4) some parts", "(with Cura 2.4) some parts of the model are lost in translation even" ]
[ "due to a damaged PTFE tube inside my hot end. I have a", "also tried to turn the original PTFE tube around, and I can't get", "a replacement (it came with my printer), but I can't seem to fit", "fit the tube into the nozzle. I also tried to turn the original", "it may be due to a damaged PTFE tube inside my hot end.", "nozzle. I also tried to turn the original PTFE tube around, and I", "around, and I can't get the other end to fit into the nozzle", "can't get the other end to fit into the nozzle either. Is there", "hot end. I have a replacement (it came with my printer), but I", "may be due to a damaged PTFE tube inside my hot end. I", "and believe that it may be due to a damaged PTFE tube inside", "that it may be due to a damaged PTFE tube inside my hot", "can't seem to fit the tube into the nozzle. I also tried to", "I have been getting clogs and believe that it may be due to", "to fit the tube into the nozzle. I also tried to turn the", "my printer), but I can't seem to fit the tube into the nozzle.", "tube around, and I can't get the other end to fit into the", "I can't get the other end to fit into the nozzle either. Is", "with my printer), but I can't seem to fit the tube into the", "have been getting clogs and believe that it may be due to a", "clogs and believe that it may be due to a damaged PTFE tube", "been getting clogs and believe that it may be due to a damaged", "PTFE tube around, and I can't get the other end to fit into", "came with my printer), but I can't seem to fit the tube into", "the nozzle. I also tried to turn the original PTFE tube around, and", "replacement (it came with my printer), but I can't seem to fit the", "believe that it may be due to a damaged PTFE tube inside my", "and I can't get the other end to fit into the nozzle either.", "have a replacement (it came with my printer), but I can't seem to", "tube into the nozzle. I also tried to turn the original PTFE tube", "get the other end to fit into the nozzle either. Is there a", "seem to fit the tube into the nozzle. I also tried to turn", "PTFE tube inside my hot end. I have a replacement (it came with", "tube inside my hot end. I have a replacement (it came with my", "the tube into the nozzle. I also tried to turn the original PTFE", "original PTFE tube around, and I can't get the other end to fit", "getting clogs and believe that it may be due to a damaged PTFE", "other end to fit into the nozzle either. Is there a trick to", "tried to turn the original PTFE tube around, and I can't get the", "into the nozzle. I also tried to turn the original PTFE tube around,", "the other end to fit into the nozzle either. Is there a trick", "I can't seem to fit the tube into the nozzle. I also tried", "but I can't seem to fit the tube into the nozzle. I also", "end to fit into the nozzle either. Is there a trick to it?", "a damaged PTFE tube inside my hot end. I have a replacement (it", "the original PTFE tube around, and I can't get the other end to", "printer), but I can't seem to fit the tube into the nozzle. I", "end. I have a replacement (it came with my printer), but I can't", "to turn the original PTFE tube around, and I can't get the other", "turn the original PTFE tube around, and I can't get the other end", "I also tried to turn the original PTFE tube around, and I can't", "be due to a damaged PTFE tube inside my hot end. I have", "inside my hot end. I have a replacement (it came with my printer),", "I have a replacement (it came with my printer), but I can't seem", "damaged PTFE tube inside my hot end. I have a replacement (it came", "to a damaged PTFE tube inside my hot end. I have a replacement", "my hot end. I have a replacement (it came with my printer), but", "(it came with my printer), but I can't seem to fit the tube" ]
[ "looks great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am printing on a TronXY X3", "the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am printing on a TronXY X3 (Prusa i3 metal", "so I suspect it is a slicer setting. Note: Bed adhesion seemed great.", "eSun PLA+ and sliced using Cura 2.4. I print on glass and do", "like a raft; but, I selected to print with a Brim not a", "Bed adhesion seemed great. First adhered well and part popped off with very", "I printed [Planetary Gears](https://www.thingiverse.com/thing:53451) and the top looks great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg)", "and the top looks great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am printing on", "I am printing on a TronXY X3 (Prusa i3 metal frame clone) using", "printing on a TronXY X3 (Prusa i3 metal frame clone) using eSun PLA+", "and sliced using Cura 2.4. I print on glass and do manual leveling", "2.4. I print on glass and do manual leveling (sheet of paper to", "I print on glass and do manual leveling (sheet of paper to set", "prints so I suspect it is a slicer setting. Note: Bed adhesion seemed", "great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am printing on a TronXY X3 (Prusa", "metal frame clone) using eSun PLA+ and sliced using Cura 2.4. I print", "slicer setting. Note: Bed adhesion seemed great. First adhered well and part popped", "print on glass and do manual leveling (sheet of paper to set gap).", "a Brim not a Raft. I have seen this on some other prints", "glass and do manual leveling (sheet of paper to set gap). What could", "manual leveling (sheet of paper to set gap). What could be causing this?", "do manual leveling (sheet of paper to set gap). What could be causing", "a slicer setting. Note: Bed adhesion seemed great. First adhered well and part", "a Raft. I have seen this on some other prints so I suspect", "a raft; but, I selected to print with a Brim not a Raft.", "bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am printing on a TronXY X3 (Prusa i3 metal frame", "[Planetary Gears](https://www.thingiverse.com/thing:53451) and the top looks great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am", "X3 (Prusa i3 metal frame clone) using eSun PLA+ and sliced using Cura", "am printing on a TronXY X3 (Prusa i3 metal frame clone) using eSun", "a TronXY X3 (Prusa i3 metal frame clone) using eSun PLA+ and sliced", "set gap). What could be causing this? It almost looks like a raft;", "other prints so I suspect it is a slicer setting. Note: Bed adhesion", "(Prusa i3 metal frame clone) using eSun PLA+ and sliced using Cura 2.4.", "using Cura 2.4. I print on glass and do manual leveling (sheet of", "suspect it is a slicer setting. Note: Bed adhesion seemed great. First adhered", "not a Raft. I have seen this on some other prints so I", "looks like a raft; but, I selected to print with a Brim not", "seen this on some other prints so I suspect it is a slicer", "What could be causing this? It almost looks like a raft; but, I", "Cura 2.4. I print on glass and do manual leveling (sheet of paper", "to print with a Brim not a Raft. I have seen this on", "almost looks like a raft; but, I selected to print with a Brim", "top looks great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am printing on a TronXY", "Gears](https://www.thingiverse.com/thing:53451) and the top looks great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am printing", "print with a Brim not a Raft. I have seen this on some", "i3 metal frame clone) using eSun PLA+ and sliced using Cura 2.4. I", "Raft. I have seen this on some other prints so I suspect it", "on a TronXY X3 (Prusa i3 metal frame clone) using eSun PLA+ and", "have seen this on some other prints so I suspect it is a", "this? It almost looks like a raft; but, I selected to print with", "clone) using eSun PLA+ and sliced using Cura 2.4. I print on glass", "and do manual leveling (sheet of paper to set gap). What could be", "raft; but, I selected to print with a Brim not a Raft. I", "adhesion seemed great. First adhered well and part popped off with very little", "but the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am printing on a TronXY X3 (Prusa i3", "printed [Planetary Gears](https://www.thingiverse.com/thing:53451) and the top looks great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I", "I selected to print with a Brim not a Raft. I have seen", "it is a slicer setting. Note: Bed adhesion seemed great. First adhered well", "selected to print with a Brim not a Raft. I have seen this", "TronXY X3 (Prusa i3 metal frame clone) using eSun PLA+ and sliced using", "doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am printing on a TronXY X3 (Prusa i3 metal frame clone)", "with a Brim not a Raft. I have seen this on some other", "paper to set gap). What could be causing this? It almost looks like", "some other prints so I suspect it is a slicer setting. Note: Bed", "the top looks great[![top](https://i.stack.imgur.com/Oq5DB.jpg)](https://i.stack.imgur.com/Oq5DB.jpg) but the bottom doesn't[![bottom](https://i.stack.imgur.com/MKMDQ.jpg)](https://i.stack.imgur.com/MKMDQ.jpg) I am printing on a", "(sheet of paper to set gap). What could be causing this? It almost", "causing this? It almost looks like a raft; but, I selected to print", "could be causing this? It almost looks like a raft; but, I selected", "setting. Note: Bed adhesion seemed great. First adhered well and part popped off", "It almost looks like a raft; but, I selected to print with a", "on glass and do manual leveling (sheet of paper to set gap). What", "this on some other prints so I suspect it is a slicer setting.", "of paper to set gap). What could be causing this? It almost looks", "to set gap). What could be causing this? It almost looks like a", "PLA+ and sliced using Cura 2.4. I print on glass and do manual", "Note: Bed adhesion seemed great. First adhered well and part popped off with", "using eSun PLA+ and sliced using Cura 2.4. I print on glass and", "is a slicer setting. Note: Bed adhesion seemed great. First adhered well and", "seemed great. First adhered well and part popped off with very little effort.", "leveling (sheet of paper to set gap). What could be causing this? It", "I have seen this on some other prints so I suspect it is", "I suspect it is a slicer setting. Note: Bed adhesion seemed great. First", "frame clone) using eSun PLA+ and sliced using Cura 2.4. I print on", "gap). What could be causing this? It almost looks like a raft; but,", "but, I selected to print with a Brim not a Raft. I have", "Brim not a Raft. I have seen this on some other prints so", "be causing this? It almost looks like a raft; but, I selected to", "on some other prints so I suspect it is a slicer setting. Note:", "sliced using Cura 2.4. I print on glass and do manual leveling (sheet" ]
[ "so that the engraving would be in a different color than the lid", "In the model description, the creator explained that he simply switched the material", "mid printing. However, I have a two-extruder printer, and I'd like to utilize", "I would like to print it using two different colors, so that the", "he simply switched the material mid printing. However, I have a two-extruder printer,", "part of the model and define that it should be printed using a", "I have a two-extruder printer, and I'd like to utilize it for this", "that the engraving would be in a different color than the lid base.", "this printing. What's the easiest way (tool) to select a part of the", "to utilize it for this printing. What's the easiest way (tool) to select", "different colors, so that the engraving would be in a different color than", "model description, the creator explained that he simply switched the material mid printing.", "thingiverse. The model is of a rectangular lid with an engraving. I would", "have a two-extruder printer, and I'd like to utilize it for this printing.", "select a part of the model and define that it should be printed", "description, the creator explained that he simply switched the material mid printing. However,", "the lid base. In the model description, the creator explained that he simply", "is of a rectangular lid with an engraving. I would like to print", "like to print it using two different colors, so that the engraving would", "two different colors, so that the engraving would be in a different color", "than the lid base. In the model description, the creator explained that he", "color than the lid base. In the model description, the creator explained that", "lid base. In the model description, the creator explained that he simply switched", "explained that he simply switched the material mid printing. However, I have a", "file from thingiverse. The model is of a rectangular lid with an engraving.", "of the model and define that it should be printed using a different", "a rectangular lid with an engraving. I would like to print it using", "would be in a different color than the lid base. In the model", "lid with an engraving. I would like to print it using two different", "like to utilize it for this printing. What's the easiest way (tool) to", "utilize it for this printing. What's the easiest way (tool) to select a", "printing. What's the easiest way (tool) to select a part of the model", "the material mid printing. However, I have a two-extruder printer, and I'd like", "to print it using two different colors, so that the engraving would be", "The model is of a rectangular lid with an engraving. I would like", "(tool) to select a part of the model and define that it should", "creator explained that he simply switched the material mid printing. However, I have", "way (tool) to select a part of the model and define that it", "switched the material mid printing. However, I have a two-extruder printer, and I'd", "base. In the model description, the creator explained that he simply switched the", "an engraving. I would like to print it using two different colors, so", "in a different color than the lid base. In the model description, the", "two-extruder printer, and I'd like to utilize it for this printing. What's the", "simply switched the material mid printing. However, I have a two-extruder printer, and", "for this printing. What's the easiest way (tool) to select a part of", "However, I have a two-extruder printer, and I'd like to utilize it for", "would like to print it using two different colors, so that the engraving", "material mid printing. However, I have a two-extruder printer, and I'd like to", "and I'd like to utilize it for this printing. What's the easiest way", "the easiest way (tool) to select a part of the model and define", "engraving would be in a different color than the lid base. In the", "that he simply switched the material mid printing. However, I have a two-extruder", "from thingiverse. The model is of a rectangular lid with an engraving. I", "a different color than the lid base. In the model description, the creator", "have an STL file from thingiverse. The model is of a rectangular lid", "a two-extruder printer, and I'd like to utilize it for this printing. What's", "a part of the model and define that it should be printed using", "the model and define that it should be printed using a different color?", "print it using two different colors, so that the engraving would be in", "the model description, the creator explained that he simply switched the material mid", "I'd like to utilize it for this printing. What's the easiest way (tool)", "printing. However, I have a two-extruder printer, and I'd like to utilize it", "the engraving would be in a different color than the lid base. In", "easiest way (tool) to select a part of the model and define that", "an STL file from thingiverse. The model is of a rectangular lid with", "different color than the lid base. In the model description, the creator explained", "using two different colors, so that the engraving would be in a different", "the creator explained that he simply switched the material mid printing. However, I", "colors, so that the engraving would be in a different color than the", "to select a part of the model and define that it should be", "of a rectangular lid with an engraving. I would like to print it", "engraving. I would like to print it using two different colors, so that", "STL file from thingiverse. The model is of a rectangular lid with an", "rectangular lid with an engraving. I would like to print it using two", "model is of a rectangular lid with an engraving. I would like to", "printer, and I'd like to utilize it for this printing. What's the easiest", "it for this printing. What's the easiest way (tool) to select a part", "What's the easiest way (tool) to select a part of the model and", "with an engraving. I would like to print it using two different colors,", "be in a different color than the lid base. In the model description,", "it using two different colors, so that the engraving would be in a", "I have an STL file from thingiverse. The model is of a rectangular" ]
[ "unable to work this out alone. Has someone had the same problem? This", "tac\" sound and it goes backwards, pushing the filament back, for a small", "goes backwards, pushing the filament back, for a small interval of time. I", "makes a \"tac tac\" sound and it goes backwards, pushing the filament back,", "the extruder motor makes a \"tac tac\" sound and it goes backwards, pushing", ">75% printing speed the extruder motor makes a \"tac tac\" sound and it", "is the 3D printer: [Geeetech High Quality Wood Geeetech Prusa I3 Pro W", "temperature and I'm unable to work this out alone. Has someone had the", "and it goes backwards, pushing the filament back, for a small interval of", "the filament back, for a small interval of time. I have tried changing", "it's at >75% printing speed the extruder motor makes a \"tac tac\" sound", "changing the nozzle temperature and I'm unable to work this out alone. Has", "I have tried changing the nozzle temperature and I'm unable to work this", "interval of time. I have tried changing the nozzle temperature and I'm unable", "backwards, pushing the filament back, for a small interval of time. I have", "of time. I have tried changing the nozzle temperature and I'm unable to", "a \"tac tac\" sound and it goes backwards, pushing the filament back, for", "sound and it goes backwards, pushing the filament back, for a small interval", "and I'm unable to work this out alone. Has someone had the same", "have tried changing the nozzle temperature and I'm unable to work this out", "same problem? This is the 3D printer: [Geeetech High Quality Wood Geeetech Prusa", "to work this out alone. Has someone had the same problem? This is", "small interval of time. I have tried changing the nozzle temperature and I'm", "When it's at >75% printing speed the extruder motor makes a \"tac tac\"", "a small interval of time. I have tried changing the nozzle temperature and", "nozzle temperature and I'm unable to work this out alone. Has someone had", "extruder motor makes a \"tac tac\" sound and it goes backwards, pushing the", "this out alone. Has someone had the same problem? This is the 3D", "work this out alone. Has someone had the same problem? This is the", "alone. Has someone had the same problem? This is the 3D printer: [Geeetech", "motor makes a \"tac tac\" sound and it goes backwards, pushing the filament", "it goes backwards, pushing the filament back, for a small interval of time.", "My 3D printer makes weird sounds. When it's at >75% printing speed the", "someone had the same problem? This is the 3D printer: [Geeetech High Quality", "the 3D printer: [Geeetech High Quality Wood Geeetech Prusa I3 Pro W 3D", "printer: [Geeetech High Quality Wood Geeetech Prusa I3 Pro W 3D Printer Kit](http://www.dx.com/es/p/geeetech-high-quality-wood-geeetech-prusa-i3-pro-w-3d-printer-kit-469707?tc=EUR).", "out alone. Has someone had the same problem? This is the 3D printer:", "time. I have tried changing the nozzle temperature and I'm unable to work", "the same problem? This is the 3D printer: [Geeetech High Quality Wood Geeetech", "sounds. When it's at >75% printing speed the extruder motor makes a \"tac", "speed the extruder motor makes a \"tac tac\" sound and it goes backwards,", "3D printer makes weird sounds. When it's at >75% printing speed the extruder", "for a small interval of time. I have tried changing the nozzle temperature", "filament back, for a small interval of time. I have tried changing the", "printing speed the extruder motor makes a \"tac tac\" sound and it goes", "tried changing the nozzle temperature and I'm unable to work this out alone.", "Has someone had the same problem? This is the 3D printer: [Geeetech High", "had the same problem? This is the 3D printer: [Geeetech High Quality Wood", "at >75% printing speed the extruder motor makes a \"tac tac\" sound and", "\"tac tac\" sound and it goes backwards, pushing the filament back, for a", "the nozzle temperature and I'm unable to work this out alone. Has someone", "3D printer: [Geeetech High Quality Wood Geeetech Prusa I3 Pro W 3D Printer", "pushing the filament back, for a small interval of time. I have tried", "I'm unable to work this out alone. Has someone had the same problem?", "weird sounds. When it's at >75% printing speed the extruder motor makes a", "printer makes weird sounds. When it's at >75% printing speed the extruder motor", "This is the 3D printer: [Geeetech High Quality Wood Geeetech Prusa I3 Pro", "makes weird sounds. When it's at >75% printing speed the extruder motor makes", "back, for a small interval of time. I have tried changing the nozzle", "problem? This is the 3D printer: [Geeetech High Quality Wood Geeetech Prusa I3" ]
[ "result: [![Infill of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill is shaped like many tiny pillars.", "is very dense in the new Cura) Infill Pattern: Lines Infill Overlap Percentage:", "testing cubes each with some setting altered, but nothing seemed to help. It", "pattern. Also I have tried printing with all speeds set to 50mm/s and", "spent ages debugging this problem but I can't figure out what I am", "I have successfully printed test cubes sliced with the old Cura in between", "is shaped like many tiny pillars. They are super fragile and while they", "standard settings (from which I have created many test cubes with each cube", "This is the result:* [![Infill of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill is shaped like", "Height: 0.10 mm Wall Line Count: 2 Top Layers: 6 Bottom Layers: 4", "in the newest Cura to work. I copied all the settings from my", "support material to be printed on top, they hardly withstand any pressure. I", "50mm/s and it still failed. My standard settings (from which I have created", "Wall Line Count: 2 Top Layers: 6 Bottom Layers: 4 Infill Line distance:", "% in old Cura, but this is very dense in the new Cura)", "Layers: 4 Infill Line distance: 5 mm (used to be 20 % in", "the new Cura. Unfortunately it seems like I just can't get the infill", "60 mm/s Speeds: Print:60 mm/s, Infill: 60 mm/s, Outer Wall: 30 mm/s, Inner", "am doing wrong. I have a Wanhao duplicator i3 (Prusa i3 clone) and", "i3 (Prusa i3 clone) and until recently I used Wanhao's adapted version of", "fragile and while they do support material to be printed on top, they", "cubes each with some setting altered, but nothing seemed to help. It can't", "printing with all speeds set to 50mm/s and it still failed. My standard", "just can't get the infill in the newest Cura to work. I copied", "% Printing Temperature: 200 °C Build Plate Temperature: 60 °C Retraction: Enabled, Distance:", "this problem but I can't figure out what I am doing wrong. I", "My standard settings* (from which I have created many test cubes with each", "i3 clone) and until recently I used Wanhao's adapted version of the Cura", "tiny pillars. They are super fragile and while they do support material to", "sliced with the old Cura in between (and not only once). Increasing temperature", "can't figure out what I am doing wrong. I have a Wanhao duplicator", "until recently I used Wanhao's adapted version of the Cura slicer. But it's", "printed test cubes sliced with the old Cura in between (and not only", "successfully printed test cubes sliced with the old Cura in between (and not", "(used to be 20 % in old Cura, but this is very dense", "it's quite an old Cura version and I wanted to make use of", "some settings tweaked): ``` Layer Height: 0.12 mm Init. Layer Height: 0.10 mm", "seemed to help. It can't be the printers fault as I have successfully", "to be 20 % in old Cura, but this is very dense in", "mm (used to be 20 % in old Cura, but this is very", "Percentage: 20 % Printing Temperature: 200 °C Build Plate Temperature: 60 °C Retraction:", "and while they do support material to be printed on top, they hardly", "adapted version of the Cura slicer. But it's quite an old Cura version", "with the old Cura in between (and not only once). Increasing temperature or", "Pattern: Lines Infill Overlap Percentage: 20 % Printing Temperature: 200 °C Build Plate", "the improved supports in the new Cura. Unfortunately it seems like I just", "flow rate or switching to triangular infill pattern. Also I have tried printing", "cubes with each cube having some settings tweaked): ``` Layer Height: 0.12 mm", "Line Count: 2 Top Layers: 6 Bottom Layers: 4 Infill Line distance: 5", "but this is very dense in the new Cura) Infill Pattern: Lines Infill", "shaped like many tiny pillars. They are super fragile and while they do", "I wanted to make use of the improved supports in the new Cura.", "mm/s, Outer Wall: 30 mm/s, Inner Wall: 60 mm/s, Top/Bottom: 40 mm/s, Travel:", "but I can't figure out what I am doing wrong. I have a", "the settings from my Wanhao branded Cura version and printed the same file.", "hardly withstand any pressure. I have gone through quite a few testing cubes", "but nothing seemed to help. It can't be the printers fault as I", "rate or switching to triangular infill pattern. Also I have tried printing with", "very dense in the new Cura) Infill Pattern: Lines Infill Overlap Percentage: 20", "Layer Height: 0.10 mm Wall Line Count: 2 Top Layers: 6 Bottom Layers:", "temperature or slowing down the infill didn't help either. Neither did increasing flow", "settings from my Wanhao branded Cura version and printed the same file. This", "Print:60 mm/s, Infill: 60 mm/s, Outer Wall: 30 mm/s, Inner Wall: 60 mm/s,", "6 Bottom Layers: 4 Infill Line distance: 5 mm (used to be 20", "Top Layers: 6 Bottom Layers: 4 Infill Line distance: 5 mm (used to", "many tiny pillars. They are super fragile and while they do support material", "old Cura version and I wanted to make use of the improved supports", "(Prusa i3 clone) and until recently I used Wanhao's adapted version of the", "Height: 0.12 mm Init. Layer Height: 0.10 mm Wall Line Count: 2 Top", "get the infill in the newest Cura to work. I copied all the", "to triangular infill pattern. Also I have tried printing with all speeds set", "°C Build Plate Temperature: 60 °C Retraction: Enabled, Distance: 2 mm, Speed: 60", "mm/s, Inner Wall: 60 mm/s, Top/Bottom: 40 mm/s, Travel: 100 mm/s, Initial Layer:", "use of the improved supports in the new Cura. Unfortunately it seems like", "help. It can't be the printers fault as I have successfully printed test", "distance: 5 mm (used to be 20 % in old Cura, but this", "used Wanhao's adapted version of the Cura slicer. But it's quite an old", "version and printed the same file. This is the result:* [![Infill of tiny", "Init. Layer Height: 0.10 mm Wall Line Count: 2 Top Layers: 6 Bottom", "the new Cura) Infill Pattern: Lines Infill Overlap Percentage: 20 % Printing Temperature:", "in between (and not only once). Increasing temperature or slowing down the infill", "Infill Line distance: 5 mm (used to be 20 % in old Cura,", "printers fault as I have successfully printed test cubes sliced with the old", "40 mm/s, Travel: 100 mm/s, Initial Layer: 20 mm/s Combing Mode: All ```", "Temperature: 60 °C Retraction: Enabled, Distance: 2 mm, Speed: 60 mm/s Speeds: Print:60", "they hardly withstand any pressure. I have gone through quite a few testing", "some setting altered, but nothing seemed to help. It can't be the printers", "this is very dense in the new Cura) Infill Pattern: Lines Infill Overlap", "version and I wanted to make use of the improved supports in the", "Overlap Percentage: 20 % Printing Temperature: 200 °C Build Plate Temperature: 60 °C", "of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill is shaped like many tiny pillars. They are", "tweaked): ``` Layer Height: 0.12 mm Init. Layer Height: 0.10 mm Wall Line", "Retraction: Enabled, Distance: 2 mm, Speed: 60 mm/s Speeds: Print:60 mm/s, Infill: 60", "Layer Height: 0.12 mm Init. Layer Height: 0.10 mm Wall Line Count: 2", "what I am doing wrong. I have a Wanhao duplicator i3 (Prusa i3", "slowing down the infill didn't help either. Neither did increasing flow rate or", "are super fragile and while they do support material to be printed on", "infill in the newest Cura to work. I copied all the settings from", "have spent ages debugging this problem but I can't figure out what I", "the printers fault as I have successfully printed test cubes sliced with the", "Wanhao branded Cura version and printed the same file. This is the result:", "mm/s Speeds: Print:60 mm/s, Infill: 60 mm/s, Outer Wall: 30 mm/s, Inner Wall:", "my Wanhao branded Cura version and printed the same file. This is the", "doing wrong. I have a Wanhao duplicator i3 (Prusa i3 clone) and until", "copied all the settings from my Wanhao branded Cura version and printed the", "Printing Temperature: 200 °C Build Plate Temperature: 60 °C Retraction: Enabled, Distance: 2", "Unfortunately it seems like I just can't get the infill in the newest", "out what I am doing wrong. I have a Wanhao duplicator i3 (Prusa", "in the new Cura. Unfortunately it seems like I just can't get the", "Wanhao duplicator i3 (Prusa i3 clone) and until recently I used Wanhao's adapted", "printed the same file. This is the result:* [![Infill of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The", "cubes sliced with the old Cura in between (and not only once). Increasing", "have gone through quite a few testing cubes each with some setting altered,", "have successfully printed test cubes sliced with the old Cura in between (and", "like many tiny pillars. They are super fragile and while they do support", "and it still failed. My standard settings (from which I have created many", "speeds set to 50mm/s and it still failed. My standard settings* (from which", "I just can't get the infill in the newest Cura to work. I", "make use of the improved supports in the new Cura. Unfortunately it seems", "(from which I have created many test cubes with each cube having some", "Cura version and printed the same file. This is the result: [![Infill of", "of the improved supports in the new Cura. Unfortunately it seems like I", "Cura, but this is very dense in the new Cura) Infill Pattern: Lines", "they do support material to be printed on top, they hardly withstand any", "the old Cura in between (and not only once). Increasing temperature or slowing", "not only once). Increasing temperature or slowing down the infill didn't help either.", "Cura to work. I copied all the settings from my Wanhao branded Cura", "super fragile and while they do support material to be printed on top,", "it still failed. My standard settings (from which I have created many test", "dense in the new Cura) Infill Pattern: Lines Infill Overlap Percentage: 20 %", "Speed: 60 mm/s Speeds: Print:60 mm/s, Infill: 60 mm/s, Outer Wall: 30 mm/s,", "I copied all the settings from my Wanhao branded Cura version and printed", "top, they hardly withstand any pressure. I have gone through quite a few", "withstand any pressure. I have gone through quite a few testing cubes each", "printed on top, they hardly withstand any pressure. I have gone through quite", "Count: 2 Top Layers: 6 Bottom Layers: 4 Infill Line distance: 5 mm", "few testing cubes each with some setting altered, but nothing seemed to help.", "cube having some settings tweaked): ``` Layer Height: 0.12 mm Init. Layer Height:", "setting altered, but nothing seemed to help. It can't be the printers fault", "the infill in the newest Cura to work. I copied all the settings", "new Cura) Infill Pattern: Lines Infill Overlap Percentage: 20 % Printing Temperature: 200", "Cura slicer. But it's quite an old Cura version and I wanted to", "200 °C Build Plate Temperature: 60 °C Retraction: Enabled, Distance: 2 mm, Speed:", "Wanhao's adapted version of the Cura slicer. But it's quite an old Cura", "Cura in between (and not only once). Increasing temperature or slowing down the", "0.12 mm Init. Layer Height: 0.10 mm Wall Line Count: 2 Top Layers:", "debugging this problem but I can't figure out what I am doing wrong.", "Infill: 60 mm/s, Outer Wall: 30 mm/s, Inner Wall: 60 mm/s, Top/Bottom: 40", "altered, but nothing seemed to help. It can't be the printers fault as", "any pressure. I have gone through quite a few testing cubes each with", "can't be the printers fault as I have successfully printed test cubes sliced", "to 50mm/s and it still failed. My standard settings (from which I have", "can't get the infill in the newest Cura to work. I copied all", "newest Cura to work. I copied all the settings from my Wanhao branded", "Infill Overlap Percentage: 20 % Printing Temperature: 200 °C Build Plate Temperature: 60", "Wall: 30 mm/s, Inner Wall: 60 mm/s, Top/Bottom: 40 mm/s, Travel: 100 mm/s,", "each with some setting altered, but nothing seemed to help. It can't be", "which I have created many test cubes with each cube having some settings", "do support material to be printed on top, they hardly withstand any pressure.", "on top, they hardly withstand any pressure. I have gone through quite a", "gone through quite a few testing cubes each with some setting altered, but", "help either. Neither did increasing flow rate or switching to triangular infill pattern.", "infill pattern. Also I have tried printing with all speeds set to 50mm/s", "each cube having some settings tweaked): ``` Layer Height: 0.12 mm Init. Layer", "many test cubes with each cube having some settings tweaked): ``` Layer Height:", "Cura version and I wanted to make use of the improved supports in", "and printed the same file. This is the result:* [![Infill of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg)", "Neither did increasing flow rate or switching to triangular infill pattern. Also I", "settings** (from which I have created many test cubes with each cube having", "with each cube having some settings tweaked): ``` Layer Height: 0.12 mm Init.", "Distance: 2 mm, Speed: 60 mm/s Speeds: Print:60 mm/s, Infill: 60 mm/s, Outer", "20 % in old Cura, but this is very dense in the new", "in the new Cura) Infill Pattern: Lines Infill Overlap Percentage: 20 % Printing", "I am doing wrong. I have a Wanhao duplicator i3 (Prusa i3 clone)", "switching to triangular infill pattern. Also I have tried printing with all speeds", "Speeds: Print:60 mm/s, Infill: 60 mm/s, Outer Wall: 30 mm/s, Inner Wall: 60", "60 °C Retraction: Enabled, Distance: 2 mm, Speed: 60 mm/s Speeds: Print:60 mm/s,", "of the Cura slicer. But it's quite an old Cura version and I", "test cubes sliced with the old Cura in between (and not only once).", "mm Init. Layer Height: 0.10 mm Wall Line Count: 2 Top Layers: 6", "the infill didn't help either. Neither did increasing flow rate or switching to", "did increasing flow rate or switching to triangular infill pattern. Also I have", "be printed on top, they hardly withstand any pressure. I have gone through", "mm/s, Infill: 60 mm/s, Outer Wall: 30 mm/s, Inner Wall: 60 mm/s, Top/Bottom:", "I have a Wanhao duplicator i3 (Prusa i3 clone) and until recently I", "is the result: [![Infill of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill is shaped like many", "tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill is shaped like many tiny pillars. They are super", "But it's quite an old Cura version and I wanted to make use", "old Cura in between (and not only once). Increasing temperature or slowing down", "be 20 % in old Cura, but this is very dense in the", "5 mm (used to be 20 % in old Cura, but this is", "Lines Infill Overlap Percentage: 20 % Printing Temperature: 200 °C Build Plate Temperature:", "Layers: 6 Bottom Layers: 4 Infill Line distance: 5 mm (used to be", "Outer Wall: 30 mm/s, Inner Wall: 60 mm/s, Top/Bottom: 40 mm/s, Travel: 100", "Top/Bottom: 40 mm/s, Travel: 100 mm/s, Initial Layer: 20 mm/s Combing Mode: All", "Wall: 60 mm/s, Top/Bottom: 40 mm/s, Travel: 100 mm/s, Initial Layer: 20 mm/s", "from my Wanhao branded Cura version and printed the same file. This is", "4 Infill Line distance: 5 mm (used to be 20 % in old", "as I have successfully printed test cubes sliced with the old Cura in", "down the infill didn't help either. Neither did increasing flow rate or switching", "like I just can't get the infill in the newest Cura to work.", "have tried printing with all speeds set to 50mm/s and it still failed.", "or slowing down the infill didn't help either. Neither did increasing flow rate", "slicer. But it's quite an old Cura version and I wanted to make", "Bottom Layers: 4 Infill Line distance: 5 mm (used to be 20 %", "and until recently I used Wanhao's adapted version of the Cura slicer. But", "improved supports in the new Cura. Unfortunately it seems like I just can't", "only once). Increasing temperature or slowing down the infill didn't help either. Neither", "the same file. This is the result: [![Infill of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill", "to help. It can't be the printers fault as I have successfully printed", "2 mm, Speed: 60 mm/s Speeds: Print:60 mm/s, Infill: 60 mm/s, Outer Wall:", "It can't be the printers fault as I have successfully printed test cubes", "figure out what I am doing wrong. I have a Wanhao duplicator i3", "have a Wanhao duplicator i3 (Prusa i3 clone) and until recently I used", "have created many test cubes with each cube having some settings tweaked): ```", "°C Retraction: Enabled, Distance: 2 mm, Speed: 60 mm/s Speeds: Print:60 mm/s, Infill:", "0.10 mm Wall Line Count: 2 Top Layers: 6 Bottom Layers: 4 Infill", "or switching to triangular infill pattern. Also I have tried printing with all", "ages debugging this problem but I can't figure out what I am doing", "I have created many test cubes with each cube having some settings tweaked):", "Inner Wall: 60 mm/s, Top/Bottom: 40 mm/s, Travel: 100 mm/s, Initial Layer: 20", "either. Neither did increasing flow rate or switching to triangular infill pattern. Also", "I have gone through quite a few testing cubes each with some setting", "They are super fragile and while they do support material to be printed", "to make use of the improved supports in the new Cura. Unfortunately it", "tried printing with all speeds set to 50mm/s and it still failed. *My", "wanted to make use of the improved supports in the new Cura. Unfortunately", "between (and not only once). Increasing temperature or slowing down the infill didn't", "test cubes with each cube having some settings tweaked): ``` Layer Height: 0.12", "30 mm/s, Inner Wall: 60 mm/s, Top/Bottom: 40 mm/s, Travel: 100 mm/s, Initial", "file. This is the result: [![Infill of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill is shaped", "nothing seemed to help. It can't be the printers fault as I have", "it seems like I just can't get the infill in the newest Cura", "problem but I can't figure out what I am doing wrong. I have", "60 mm/s, Top/Bottom: 40 mm/s, Travel: 100 mm/s, Initial Layer: 20 mm/s Combing", "version of the Cura slicer. But it's quite an old Cura version and", "infill is shaped like many tiny pillars. They are super fragile and while", "I can't figure out what I am doing wrong. I have a Wanhao", "a few testing cubes each with some setting altered, but nothing seemed to", "Infill Pattern: Lines Infill Overlap Percentage: 20 % Printing Temperature: 200 °C Build", "mm/s, Top/Bottom: 40 mm/s, Travel: 100 mm/s, Initial Layer: 20 mm/s Combing Mode:", "I used Wanhao's adapted version of the Cura slicer. But it's quite an", "a Wanhao duplicator i3 (Prusa i3 clone) and until recently I used Wanhao's", "still failed. My standard settings (from which I have created many test cubes", "created many test cubes with each cube having some settings tweaked): ``` Layer", "branded Cura version and printed the same file. This is the result: [![Infill", "set to 50mm/s and it still failed. My standard settings (from which I", "through quite a few testing cubes each with some setting altered, but nothing", "I have tried printing with all speeds set to 50mm/s and it still", "[![Infill of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill is shaped like many tiny pillars. They", "fault as I have successfully printed test cubes sliced with the old Cura", "60 mm/s, Outer Wall: 30 mm/s, Inner Wall: 60 mm/s, Top/Bottom: 40 mm/s,", "having some settings tweaked): ``` Layer Height: 0.12 mm Init. Layer Height: 0.10", "in old Cura, but this is very dense in the new Cura) Infill", "with some setting altered, but nothing seemed to help. It can't be the", "failed. My standard settings (from which I have created many test cubes with", "quite a few testing cubes each with some setting altered, but nothing seemed", "mm Wall Line Count: 2 Top Layers: 6 Bottom Layers: 4 Infill Line", "Cura) Infill Pattern: Lines Infill Overlap Percentage: 20 % Printing Temperature: 200 °C", "and I wanted to make use of the improved supports in the new", "wrong. I have a Wanhao duplicator i3 (Prusa i3 clone) and until recently", "the Cura slicer. But it's quite an old Cura version and I wanted", "triangular infill pattern. Also I have tried printing with all speeds set to", "Line distance: 5 mm (used to be 20 % in old Cura, but", "Build Plate Temperature: 60 °C Retraction: Enabled, Distance: 2 mm, Speed: 60 mm/s", "pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill is shaped like many tiny pillars. They are super fragile", "all the settings from my Wanhao branded Cura version and printed the same", "recently I used Wanhao's adapted version of the Cura slicer. But it's quite", "(and not only once). Increasing temperature or slowing down the infill didn't help", "while they do support material to be printed on top, they hardly withstand", "didn't help either. Neither did increasing flow rate or switching to triangular infill", "clone) and until recently I used Wanhao's adapted version of the Cura slicer.", "Plate Temperature: 60 °C Retraction: Enabled, Distance: 2 mm, Speed: 60 mm/s Speeds:", "settings tweaked): ``` Layer Height: 0.12 mm Init. Layer Height: 0.10 mm Wall", "material to be printed on top, they hardly withstand any pressure. I have", "the newest Cura to work. I copied all the settings from my Wanhao", "Cura. Unfortunately it seems like I just can't get the infill in the", "to work. I copied all the settings from my Wanhao branded Cura version", "the result: [![Infill of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill is shaped like many tiny", "quite an old Cura version and I wanted to make use of the", "once). Increasing temperature or slowing down the infill didn't help either. Neither did", "old Cura, but this is very dense in the new Cura) Infill Pattern:", "supports in the new Cura. Unfortunately it seems like I just can't get", "20 % Printing Temperature: 200 °C Build Plate Temperature: 60 °C Retraction: Enabled,", "pressure. I have gone through quite a few testing cubes each with some", "2 Top Layers: 6 Bottom Layers: 4 Infill Line distance: 5 mm (used", "be the printers fault as I have successfully printed test cubes sliced with", "The infill is shaped like many tiny pillars. They are super fragile and", "Also I have tried printing with all speeds set to 50mm/s and it", "Enabled, Distance: 2 mm, Speed: 60 mm/s Speeds: Print:60 mm/s, Infill: 60 mm/s,", "Temperature: 200 °C Build Plate Temperature: 60 °C Retraction: Enabled, Distance: 2 mm,", "mm, Speed: 60 mm/s Speeds: Print:60 mm/s, Infill: 60 mm/s, Outer Wall: 30", "increasing flow rate or switching to triangular infill pattern. Also I have tried", "work. I copied all the settings from my Wanhao branded Cura version and", "new Cura. Unfortunately it seems like I just can't get the infill in", "pillars. They are super fragile and while they do support material to be", "infill didn't help either. Neither did increasing flow rate or switching to triangular", "duplicator i3 (Prusa i3 clone) and until recently I used Wanhao's adapted version", "with all speeds set to 50mm/s and it still failed. My standard settings", "same file. This is the result: [![Infill of tiny pillars](https://i.stack.imgur.com/RJPkN.jpg)](https://i.stack.imgur.com/RJPkN.jpg) The infill is", "seems like I just can't get the infill in the newest Cura to", "all speeds set to 50mm/s and it still failed. My standard settings** *(from", "``` Layer Height: 0.12 mm Init. Layer Height: 0.10 mm Wall Line Count:", "to be printed on top, they hardly withstand any pressure. I have gone", "I have spent ages debugging this problem but I can't figure out what", "Increasing temperature or slowing down the infill didn't help either. Neither did increasing", "an old Cura version and I wanted to make use of the improved" ]
[ "Does anyone know of any reasonably cheap guides to build my own 3-D", "3-D printer is obviously a huge undertaking. Does anyone know of any reasonably", "obviously a huge undertaking. Does anyone know of any reasonably cheap guides to", "is obviously a huge undertaking. Does anyone know of any reasonably cheap guides", "a huge undertaking. Does anyone know of any reasonably cheap guides to build", "printer is obviously a huge undertaking. Does anyone know of any reasonably cheap", "huge undertaking. Does anyone know of any reasonably cheap guides to build my", "undertaking. Does anyone know of any reasonably cheap guides to build my own", "anyone know of any reasonably cheap guides to build my own 3-D printer?", "Building a 3-D printer is obviously a huge undertaking. Does anyone know of", "a 3-D printer is obviously a huge undertaking. Does anyone know of any" ]
[ "I want to make. I want to make a custom game cartridge which", "Now I can produce the inside as a thin PCB (0.6mm-1mm). But I", "SD card in a custom shell. Now I can produce the inside as", "half of the shell would be at most ~0.6mm thick. Is this something", "I was wondering what the best (and cheapest) way to prototype (and maybe", "(and cheapest) way to prototype (and maybe make a small run production) the", "the best (and cheapest) way to prototype (and maybe make a small run", "outer shell would be. The entire cart is about 2mm thick, so each", "the inside as a thin PCB (0.6mm-1mm). But I was wondering what the", "image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's like a SD card in a custom shell.", "make a small run production) the outer shell would be. The entire cart", "(0.6mm-1mm). But I was wondering what the best (and cheapest) way to prototype", "this: [![enter image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's like a SD card in a", "way to prototype (and maybe make a small run production) the outer shell", "entire cart is about 2mm thick, so each half of the shell would", "want to make a custom game cartridge which looks like this: [![enter image", "small run production) the outer shell would be. The entire cart is about", "But I was wondering what the best (and cheapest) way to prototype (and", "to prototype (and maybe make a small run production) the outer shell would", "maybe make a small run production) the outer shell would be. The entire", "be. The entire cart is about 2mm thick, so each half of the", "I want to make a custom game cartridge which looks like this: [![enter", "I can produce the inside as a thin PCB (0.6mm-1mm). But I was", "2mm thick, so each half of the shell would be at most ~0.6mm", "thick, so each half of the shell would be at most ~0.6mm thick.", "description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's like a SD card in a custom shell. Now", "know nothing about 3D printing and I was wondering if it is a", "in a custom shell. Now I can produce the inside as a thin", "and I was wondering if it is a good candidate for what I", "at most ~0.6mm thick. Is this something I can do with a typical", "about 2mm thick, so each half of the shell would be at most", "was wondering what the best (and cheapest) way to prototype (and maybe make", "would be. The entire cart is about 2mm thick, so each half of", "wondering what the best (and cheapest) way to prototype (and maybe make a", "most ~0.6mm thick. Is this something I can do with a typical 3D", "the outer shell would be. The entire cart is about 2mm thick, so", "a SD card in a custom shell. Now I can produce the inside", "shell. Now I can produce the inside as a thin PCB (0.6mm-1mm). But", "looks like this: [![enter image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's like a SD card", "The entire cart is about 2mm thick, so each half of the shell", "prototype (and maybe make a small run production) the outer shell would be.", "want to make. I want to make a custom game cartridge which looks", "for what I want to make. I want to make a custom game", "custom shell. Now I can produce the inside as a thin PCB (0.6mm-1mm).", "wondering if it is a good candidate for what I want to make.", "I can do with a typical 3D printer? How would I \"attach\" the", "is a good candidate for what I want to make. I want to", "of the shell would be at most ~0.6mm thick. Is this something I", "candidate for what I want to make. I want to make a custom", "to make. I want to make a custom game cartridge which looks like", "cartridge which looks like this: [![enter image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's like a", "a thin PCB (0.6mm-1mm). But I was wondering what the best (and cheapest)", "be at most ~0.6mm thick. Is this something I can do with a", "this something I can do with a typical 3D printer? How would I", "a custom game cartridge which looks like this: [![enter image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically", "Basically it's like a SD card in a custom shell. Now I can", "a custom shell. Now I can produce the inside as a thin PCB", "produce the inside as a thin PCB (0.6mm-1mm). But I was wondering what", "nothing about 3D printing and I was wondering if it is a good", "shell would be. The entire cart is about 2mm thick, so each half", "card in a custom shell. Now I can produce the inside as a", "is about 2mm thick, so each half of the shell would be at", "can produce the inside as a thin PCB (0.6mm-1mm). But I was wondering", "cheapest) way to prototype (and maybe make a small run production) the outer", "game cartridge which looks like this: [![enter image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's like", "it is a good candidate for what I want to make. I want", "thick. Is this something I can do with a typical 3D printer? How", "I was wondering if it is a good candidate for what I want", "make. I want to make a custom game cartridge which looks like this:", "I know nothing about 3D printing and I was wondering if it is", "here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's like a SD card in a custom shell. Now I", "a small run production) the outer shell would be. The entire cart is", "each half of the shell would be at most ~0.6mm thick. Is this", "can do with a typical 3D printer? How would I \"attach\" the two", "like this: [![enter image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's like a SD card in", "do with a typical 3D printer? How would I \"attach\" the two halves", "printing and I was wondering if it is a good candidate for what", "cart is about 2mm thick, so each half of the shell would be", "to make a custom game cartridge which looks like this: [![enter image description", "it's like a SD card in a custom shell. Now I can produce", "best (and cheapest) way to prototype (and maybe make a small run production)", "was wondering if it is a good candidate for what I want to", "about 3D printing and I was wondering if it is a good candidate", "so each half of the shell would be at most ~0.6mm thick. Is", "3D printing and I was wondering if it is a good candidate for", "as a thin PCB (0.6mm-1mm). But I was wondering what the best (and", "what I want to make. I want to make a custom game cartridge", "with a typical 3D printer? How would I \"attach\" the two halves together?", "PCB (0.6mm-1mm). But I was wondering what the best (and cheapest) way to", "the shell would be at most ~0.6mm thick. Is this something I can", "would be at most ~0.6mm thick. Is this something I can do with", "make a custom game cartridge which looks like this: [![enter image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg)", "(and maybe make a small run production) the outer shell would be. The", "production) the outer shell would be. The entire cart is about 2mm thick,", "~0.6mm thick. Is this something I can do with a typical 3D printer?", "[![enter image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's like a SD card in a custom", "like a SD card in a custom shell. Now I can produce the", "shell would be at most ~0.6mm thick. Is this something I can do", "a good candidate for what I want to make. I want to make", "custom game cartridge which looks like this: [![enter image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's", "thin PCB (0.6mm-1mm). But I was wondering what the best (and cheapest) way", "good candidate for what I want to make. I want to make a", "which looks like this: [![enter image description here](https://i.stack.imgur.com/k0RpQ.jpg)](https://i.stack.imgur.com/k0RpQ.jpg) Basically it's like a SD", "Is this something I can do with a typical 3D printer? How would", "if it is a good candidate for what I want to make. I", "run production) the outer shell would be. The entire cart is about 2mm", "what the best (and cheapest) way to prototype (and maybe make a small", "inside as a thin PCB (0.6mm-1mm). But I was wondering what the best", "something I can do with a typical 3D printer? How would I \"attach\"" ]
[ "build plate easier than the resin tray but this Teflon coat wears over", "as I know resin trays have a Teflon coat that allows prints to", "to the build plate easier than the resin tray but this Teflon coat", "far as I know resin trays have a Teflon coat that allows prints", "Teflon coat that allows prints to stick to the build plate easier than", "easier than the resin tray but this Teflon coat wears over time. I", "resin tray but this Teflon coat wears over time. I am new to", "tray but this Teflon coat wears over time. I am new to the", "I am new to the SLA scene and am currently troubleshooting a Draken", "the SLA scene and am currently troubleshooting a Draken Facture and trying to", "SLA scene and am currently troubleshooting a Draken Facture and trying to hone", "the bottom of the resin vat. How often should these trays be swapped", "vat. How often should these trays be swapped out to allow for smooth", "than the resin tray but this Teflon coat wears over time. I am", "a Teflon coat that allows prints to stick to the build plate easier", "the resin tray but this Teflon coat wears over time. I am new", "wears over time. I am new to the SLA scene and am currently", "my print keep sticking to the bottom of the resin vat. How often", "resin vat. How often should these trays be swapped out to allow for", "setting but my print keep sticking to the bottom of the resin vat.", "How often should these trays be swapped out to allow for smooth printing?", "and am currently troubleshooting a Draken Facture and trying to hone in my", "that allows prints to stick to the build plate easier than the resin", "have a Teflon coat that allows prints to stick to the build plate", "hone in my setting but my print keep sticking to the bottom of", "troubleshooting a Draken Facture and trying to hone in my setting but my", "coat wears over time. I am new to the SLA scene and am", "know resin trays have a Teflon coat that allows prints to stick to", "to the SLA scene and am currently troubleshooting a Draken Facture and trying", "bottom of the resin vat. How often should these trays be swapped out", "this Teflon coat wears over time. I am new to the SLA scene", "resin trays have a Teflon coat that allows prints to stick to the", "new to the SLA scene and am currently troubleshooting a Draken Facture and", "the build plate easier than the resin tray but this Teflon coat wears", "to hone in my setting but my print keep sticking to the bottom", "prints to stick to the build plate easier than the resin tray but", "Facture and trying to hone in my setting but my print keep sticking", "but this Teflon coat wears over time. I am new to the SLA", "time. I am new to the SLA scene and am currently troubleshooting a", "the resin vat. How often should these trays be swapped out to allow", "my setting but my print keep sticking to the bottom of the resin", "am currently troubleshooting a Draken Facture and trying to hone in my setting", "As far as I know resin trays have a Teflon coat that allows", "currently troubleshooting a Draken Facture and trying to hone in my setting but", "to the bottom of the resin vat. How often should these trays be", "sticking to the bottom of the resin vat. How often should these trays", "over time. I am new to the SLA scene and am currently troubleshooting", "to stick to the build plate easier than the resin tray but this", "a Draken Facture and trying to hone in my setting but my print", "trays have a Teflon coat that allows prints to stick to the build", "stick to the build plate easier than the resin tray but this Teflon", "of the resin vat. How often should these trays be swapped out to", "and trying to hone in my setting but my print keep sticking to", "allows prints to stick to the build plate easier than the resin tray", "am new to the SLA scene and am currently troubleshooting a Draken Facture", "I know resin trays have a Teflon coat that allows prints to stick", "in my setting but my print keep sticking to the bottom of the", "print keep sticking to the bottom of the resin vat. How often should", "Draken Facture and trying to hone in my setting but my print keep", "coat that allows prints to stick to the build plate easier than the", "but my print keep sticking to the bottom of the resin vat. How", "keep sticking to the bottom of the resin vat. How often should these", "scene and am currently troubleshooting a Draken Facture and trying to hone in", "plate easier than the resin tray but this Teflon coat wears over time.", "trying to hone in my setting but my print keep sticking to the", "Teflon coat wears over time. I am new to the SLA scene and" ]
[ "but it appears to be Kapton. What can I use to attach it", "to attach it to the extruder? [![enter image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder is", "end. I thought the yellow as double-sticky but it appears to be Kapton.", "image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder is already covered on four sides. I want", "can I use to attach it to the extruder? [![enter image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg)", "My extruder is already covered on four sides. I want to cover the", "bought some heating block cotton to insulate the exposed surface of my hot", "the exposed surface of my hot end. I thought the yellow as double-sticky", "some heating block cotton to insulate the exposed surface of my hot end.", "is already covered on four sides. I want to cover the other two.[![enter", "covered on four sides. I want to cover the other two.[![enter image description", "I bought some heating block cotton to insulate the exposed surface of my", "I use to attach it to the extruder? [![enter image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My", "the extruder? [![enter image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder is already covered on four", "[![enter image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder is already covered on four sides. I", "yellow as double-sticky but it appears to be Kapton. What can I use", "already covered on four sides. I want to cover the other two.[![enter image", "as double-sticky but it appears to be Kapton. What can I use to", "here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder is already covered on four sides. I want to cover", "surface of my hot end. I thought the yellow as double-sticky but it", "be Kapton. What can I use to attach it to the extruder? [![enter", "use to attach it to the extruder? [![enter image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder", "attach it to the extruder? [![enter image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder is already", "extruder? [![enter image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder is already covered on four sides.", "description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder is already covered on four sides. I want to", "to the extruder? [![enter image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder is already covered on", "hot end. I thought the yellow as double-sticky but it appears to be", "my hot end. I thought the yellow as double-sticky but it appears to", "heating block cotton to insulate the exposed surface of my hot end. I", "to insulate the exposed surface of my hot end. I thought the yellow", "thought the yellow as double-sticky but it appears to be Kapton. What can", "double-sticky but it appears to be Kapton. What can I use to attach", "of my hot end. I thought the yellow as double-sticky but it appears", "appears to be Kapton. What can I use to attach it to the", "to be Kapton. What can I use to attach it to the extruder?", "insulate the exposed surface of my hot end. I thought the yellow as", "on four sides. I want to cover the other two.[![enter image description here](https://i.stack.imgur.com/VLyKX.png)](https://i.stack.imgur.com/VLyKX.png)", "the yellow as double-sticky but it appears to be Kapton. What can I", "What can I use to attach it to the extruder? [![enter image description", "cotton to insulate the exposed surface of my hot end. I thought the", "it appears to be Kapton. What can I use to attach it to", "I thought the yellow as double-sticky but it appears to be Kapton. What", "it to the extruder? [![enter image description here](https://i.stack.imgur.com/9FFOY.jpg)](https://i.stack.imgur.com/9FFOY.jpg) My extruder is already covered", "block cotton to insulate the exposed surface of my hot end. I thought", "extruder is already covered on four sides. I want to cover the other", "exposed surface of my hot end. I thought the yellow as double-sticky but", "Kapton. What can I use to attach it to the extruder? [![enter image" ]
[ "could that be a vibration issue? Or is the coupler too stiff? [![enter", "Now i have some strange waves on the side of my prints. Are", "a vibration issue? Or is the coupler too stiff? [![enter image description here](https://i.stack.imgur.com/IbumF.jpg)](https://i.stack.imgur.com/IbumF.jpg)[![enter", "strange waves on the side of my prints. Are the threaded rods bent", "the threaded rods bent or could that be a vibration issue? Or is", "i have some strange waves on the side of my prints. Are the", "bent or could that be a vibration issue? Or is the coupler too", "printer. Now i have some strange waves on the side of my prints.", "some strange waves on the side of my prints. Are the threaded rods", "on the side of my prints. Are the threaded rods bent or could", "vibration issue? Or is the coupler too stiff? [![enter image description here](https://i.stack.imgur.com/IbumF.jpg)](https://i.stack.imgur.com/IbumF.jpg)[![enter image", "Or is the coupler too stiff? [![enter image description here](https://i.stack.imgur.com/IbumF.jpg)](https://i.stack.imgur.com/IbumF.jpg)[![enter image description here](https://i.stack.imgur.com/Qo32X.jpg)](https://i.stack.imgur.com/Qo32X.jpg)", "Are the threaded rods bent or could that be a vibration issue? Or", "be a vibration issue? Or is the coupler too stiff? [![enter image description", "my diy printer. Now i have some strange waves on the side of", "issue? Or is the coupler too stiff? [![enter image description here](https://i.stack.imgur.com/IbumF.jpg)](https://i.stack.imgur.com/IbumF.jpg)[![enter image description", "Yesterday i replaced the z axis of my diy printer. Now i have", "or could that be a vibration issue? Or is the coupler too stiff?", "that be a vibration issue? Or is the coupler too stiff? [![enter image", "replaced the z axis of my diy printer. Now i have some strange", "of my diy printer. Now i have some strange waves on the side", "z axis of my diy printer. Now i have some strange waves on", "waves on the side of my prints. Are the threaded rods bent or", "my prints. Are the threaded rods bent or could that be a vibration", "diy printer. Now i have some strange waves on the side of my", "the z axis of my diy printer. Now i have some strange waves", "i replaced the z axis of my diy printer. Now i have some", "side of my prints. Are the threaded rods bent or could that be", "axis of my diy printer. Now i have some strange waves on the", "threaded rods bent or could that be a vibration issue? Or is the", "rods bent or could that be a vibration issue? Or is the coupler", "prints. Are the threaded rods bent or could that be a vibration issue?", "the side of my prints. Are the threaded rods bent or could that", "have some strange waves on the side of my prints. Are the threaded", "of my prints. Are the threaded rods bent or could that be a" ]
[ "I like it but I can't find aluminum extrusion needed, like this: [MiSUMi", "this: [MiSUMi - Aluminum Extrusion - 5 series, Base 20, 20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40).", "knows where I can buy it in Ukraine? Or maybe another frame options?", "A8](https://www.thingiverse.com/thing:2263216). I like it but I can't find aluminum extrusion needed, like this:", "- 5 series, Base 20, 20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody knows where I", "- Metal Frame for Anet A8](https://www.thingiverse.com/thing:2263216). I like it but I can't find", "Anet A8 frame are broken. I find frame project [AM8 - Metal Frame", "Maybe somebody knows where I can buy it in Ukraine? Or maybe another", "I find frame project [AM8 - Metal Frame for Anet A8](https://www.thingiverse.com/thing:2263216). I like", "frame project [AM8 - Metal Frame for Anet A8](https://www.thingiverse.com/thing:2263216). I like it but", "series, Base 20, 20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody knows where I can buy", "find frame project [AM8 - Metal Frame for Anet A8](https://www.thingiverse.com/thing:2263216). I like it", "needed, like this: [MiSUMi - Aluminum Extrusion - 5 series, Base 20, 20mm", "frame are broken. I find frame project [AM8 - Metal Frame for Anet", "A8 frame are broken. I find frame project [AM8 - Metal Frame for", "Extrusion - 5 series, Base 20, 20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody knows where", "like this: [MiSUMi - Aluminum Extrusion - 5 series, Base 20, 20mm x", "project [AM8 - Metal Frame for Anet A8](https://www.thingiverse.com/thing:2263216). I like it but I", "broken. I find frame project [AM8 - Metal Frame for Anet A8](https://www.thingiverse.com/thing:2263216). I", "- Aluminum Extrusion - 5 series, Base 20, 20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody", "it but I can't find aluminum extrusion needed, like this: [MiSUMi - Aluminum", "but I can't find aluminum extrusion needed, like this: [MiSUMi - Aluminum Extrusion", "[MiSUMi - Aluminum Extrusion - 5 series, Base 20, 20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe", "Frame for Anet A8](https://www.thingiverse.com/thing:2263216). I like it but I can't find aluminum extrusion", "Aluminum Extrusion - 5 series, Base 20, 20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody knows", "40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody knows where I can buy it in Ukraine? Or maybe", "[AM8 - Metal Frame for Anet A8](https://www.thingiverse.com/thing:2263216). I like it but I can't", "Base 20, 20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody knows where I can buy it", "somebody knows where I can buy it in Ukraine? Or maybe another frame", "are broken. I find frame project [AM8 - Metal Frame for Anet A8](https://www.thingiverse.com/thing:2263216).", "20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody knows where I can buy it in Ukraine?", "find aluminum extrusion needed, like this: [MiSUMi - Aluminum Extrusion - 5 series,", "extrusion needed, like this: [MiSUMi - Aluminum Extrusion - 5 series, Base 20,", "for Anet A8](https://www.thingiverse.com/thing:2263216). I like it but I can't find aluminum extrusion needed,", "5 series, Base 20, 20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody knows where I can", "20, 20mm x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody knows where I can buy it in", "aluminum extrusion needed, like this: [MiSUMi - Aluminum Extrusion - 5 series, Base", "x 40mm](https://us.misumi-ec.com/vona2/detail/110302684350/?Inch=0&CategorySpec=00000042730%3A%3A20x40). Maybe somebody knows where I can buy it in Ukraine? Or", "can't find aluminum extrusion needed, like this: [MiSUMi - Aluminum Extrusion - 5", "like it but I can't find aluminum extrusion needed, like this: [MiSUMi -", "My Anet A8 frame are broken. I find frame project [AM8 - Metal", "Anet A8](https://www.thingiverse.com/thing:2263216). I like it but I can't find aluminum extrusion needed, like", "Metal Frame for Anet A8](https://www.thingiverse.com/thing:2263216). I like it but I can't find aluminum", "I can't find aluminum extrusion needed, like this: [MiSUMi - Aluminum Extrusion -" ]
[ "(\"springs\") but no coiled tubes (i.e. the springs are hollow). Maybe my searching", "searching hasn't been good enough! But I was wondering if this is a", "a few coils (\"springs\") but no coiled tubes (i.e. the springs are hollow).", "But I was wondering if this is a limitation to 3D printing models?", "grabcad, etc) in search for a coiled tube, but I have yet to", "in search for a coiled tube, but I have yet to find anything", "anything suitable. There are a few coils (\"springs\") but no coiled tubes (i.e.", "no coiled tubes (i.e. the springs are hollow). Maybe my searching hasn't been", "my searching hasn't been good enough! But I was wondering if this is", "are a few coils (\"springs\") but no coiled tubes (i.e. the springs are", "sites (thingiverse, grabcad, etc) in search for a coiled tube, but I have", "have yet to find anything suitable. There are a few coils (\"springs\") but", "I've gone on quite a few sites (thingiverse, grabcad, etc) in search for", "quite a few sites (thingiverse, grabcad, etc) in search for a coiled tube,", "Maybe my searching hasn't been good enough! But I was wondering if this", "yet to find anything suitable. There are a few coils (\"springs\") but no", "for a coiled tube, but I have yet to find anything suitable. There", "been good enough! But I was wondering if this is a limitation to", "gone on quite a few sites (thingiverse, grabcad, etc) in search for a", "a coiled tube, but I have yet to find anything suitable. There are", "on quite a few sites (thingiverse, grabcad, etc) in search for a coiled", "springs are hollow). Maybe my searching hasn't been good enough! But I was", "find anything suitable. There are a few coils (\"springs\") but no coiled tubes", "good enough! But I was wondering if this is a limitation to 3D", "the springs are hollow). Maybe my searching hasn't been good enough! But I", "but I have yet to find anything suitable. There are a few coils", "few coils (\"springs\") but no coiled tubes (i.e. the springs are hollow). Maybe", "enough! But I was wondering if this is a limitation to 3D printing", "hollow). Maybe my searching hasn't been good enough! But I was wondering if", "(i.e. the springs are hollow). Maybe my searching hasn't been good enough! But", "hasn't been good enough! But I was wondering if this is a limitation", "search for a coiled tube, but I have yet to find anything suitable.", "few sites (thingiverse, grabcad, etc) in search for a coiled tube, but I", "I have yet to find anything suitable. There are a few coils (\"springs\")", "(thingiverse, grabcad, etc) in search for a coiled tube, but I have yet", "coiled tubes (i.e. the springs are hollow). Maybe my searching hasn't been good", "to find anything suitable. There are a few coils (\"springs\") but no coiled", "coils (\"springs\") but no coiled tubes (i.e. the springs are hollow). Maybe my", "but no coiled tubes (i.e. the springs are hollow). Maybe my searching hasn't", "suitable. There are a few coils (\"springs\") but no coiled tubes (i.e. the", "coiled tube, but I have yet to find anything suitable. There are a", "etc) in search for a coiled tube, but I have yet to find", "tubes (i.e. the springs are hollow). Maybe my searching hasn't been good enough!", "are hollow). Maybe my searching hasn't been good enough! But I was wondering", "a few sites (thingiverse, grabcad, etc) in search for a coiled tube, but", "There are a few coils (\"springs\") but no coiled tubes (i.e. the springs", "tube, but I have yet to find anything suitable. There are a few" ]
[ "I cannot figure out how to get this line drawing filled. I converted", "I use TinkerCad to convert to STL and that works fine. So I", "to print it a couple of mm high. I cannot figure out how", "that sounds really dumb. [![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I went back to the", "and tight to be able to convert it to a good SVG later", "it is more of a graphics design question now.. <https://graphicdesign.stackexchange.com/questions/94773/from-drawing-to-3d-print> [![enter image description", "STL and that works fine. So I could also try to edit the", "original scanned image (TIFF) and then fill it by hand with black ink", "to a good SVG later on. Looks like it is more of a", "by hand with black ink and then scan it and convert it to", "and I need it to be sharp and tight to be able to", "print it a couple of mm high. I cannot figure out how to", "with Onshape but all I ever get is just the line and this", "line and this does not work well on my printer. What is a", "not work well on my printer. What is a smart way to get", "this filled in and ready to go? I use TinkerCad to convert to", "I need it to be sharp and tight to be able to convert", "it to be sharp and tight to be able to convert it to", "scanned image (TIFF) and then fill it by hand with black ink and", "how to get this line drawing filled. I converted to SVG with Inkscape,", "mm high. I cannot figure out how to get this line drawing filled.", "print the original scanned image (TIFF) and then fill it by hand with", "bucket tool. The result is a rather noisy image and I need it", "tight to be able to convert it to a good SVG later on.", "does not work well on my printer. What is a smart way to", "a smart way to get this filled in and ready to go? I", "converted to SVG with Inkscape, used GIMP, took it online to TinkerCad and", "ever get is just the line and this does not work well on", "of mm high. I cannot figure out how to get this line drawing", "able to convert it to a good SVG later on. Looks like it", "the SVG file. Maybe I should print the original scanned image (TIFF) and", "it and convert it to SVG but that sounds really dumb. [![should be", "and that works fine. So I could also try to edit the STL", "is a rather noisy image and I need it to be sharp and", "GIMP, took it online to TinkerCad and tried it with Onshape but all", "works fine. So I could also try to edit the STL in stead", "drawing filled. I converted to SVG with Inkscape, used GIMP, took it online", "is a smart way to get this filled in and ready to go?", "use TinkerCad to convert to STL and that works fine. So I could", "stead of the SVG file. Maybe I should print the original scanned image", "sharp and tight to be able to convert it to a good SVG", "go? I use TinkerCad to convert to STL and that works fine. So", "dumb. [![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I went back to the original drawing and", "image and I need it to be sharp and tight to be able", "but that sounds really dumb. [![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I went back to", "is a line drawing and I would like to print it a couple", "to convert it to a good SVG later on. Looks like it is", "online to TinkerCad and tried it with Onshape but all I ever get", "it to a good SVG later on. Looks like it is more of", "would like to print it a couple of mm high. I cannot figure", "printer. What is a smart way to get this filled in and ready", "and this does not work well on my printer. What is a smart", "(TIFF) and then fill it by hand with black ink and then scan", "and using the bucket tool. The result is a rather noisy image and", "be sharp and tight to be able to convert it to a good", "to TinkerCad and tried it with Onshape but all I ever get is", "my printer. What is a smart way to get this filled in and", "really dumb. [![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I went back to the original drawing", "SVG later on. Looks like it is more of a graphics design question", "it to SVG but that sounds really dumb. [![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I", "scan it and convert it to SVG but that sounds really dumb. [![should", "and tried it with Onshape but all I ever get is just the", "line drawing filled. I converted to SVG with Inkscape, used GIMP, took it", "SVG but that sounds really dumb. [![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I went back", "it a couple of mm high. I cannot figure out how to get", "fine. So I could also try to edit the STL in stead of", "[![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I went back to the original drawing and using", "image (TIFF) and then fill it by hand with black ink and then", "went back to the original drawing and using the bucket tool. The result", "and convert it to SVG but that sounds really dumb. [![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png)", "on. Looks like it is more of a graphics design question now.. <https://graphicdesign.stackexchange.com/questions/94773/from-drawing-to-3d-print>", "it online to TinkerCad and tried it with Onshape but all I ever", "Onshape but all I ever get is just the line and this does", "using the bucket tool. The result is a rather noisy image and I", "filled. I converted to SVG with Inkscape, used GIMP, took it online to", "of the SVG file. Maybe I should print the original scanned image (TIFF)", "with black ink and then scan it and convert it to SVG but", "file. Maybe I should print the original scanned image (TIFF) and then fill", "a couple of mm high. I cannot figure out how to get this", "be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I went back to the original drawing and using the", "to be able to convert it to a good SVG later on. Looks", "TinkerCad and tried it with Onshape but all I ever get is just", "convert it to SVG but that sounds really dumb. [![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE", "to get this filled in and ready to go? I use TinkerCad to", "well on my printer. What is a smart way to get this filled", "result is a rather noisy image and I need it to be sharp", "What is a smart way to get this filled in and ready to", "need it to be sharp and tight to be able to convert it", "I could also try to edit the STL in stead of the SVG", "drawing and I would like to print it a couple of mm high.", "should print the original scanned image (TIFF) and then fill it by hand", "that works fine. So I could also try to edit the STL in", "the bucket tool. The result is a rather noisy image and I need", "used GIMP, took it online to TinkerCad and tried it with Onshape but", "sounds really dumb. [![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I went back to the original", "and ready to go? I use TinkerCad to convert to STL and that", "way to get this filled in and ready to go? I use TinkerCad", "then fill it by hand with black ink and then scan it and", "good SVG later on. Looks like it is more of a graphics design", "and then fill it by hand with black ink and then scan it", "ready to go? I use TinkerCad to convert to STL and that works", "later on. Looks like it is more of a graphics design question now..", "line drawing and I would like to print it a couple of mm", "and then scan it and convert it to SVG but that sounds really", "I went back to the original drawing and using the bucket tool. The", "original drawing and using the bucket tool. The result is a rather noisy", "took it online to TinkerCad and tried it with Onshape but all I", "it by hand with black ink and then scan it and convert it", "then scan it and convert it to SVG but that sounds really dumb.", "work well on my printer. What is a smart way to get this", "to STL and that works fine. So I could also try to edit", "the STL in stead of the SVG file. Maybe I should print the", "This is a line drawing and I would like to print it a", "I converted to SVG with Inkscape, used GIMP, took it online to TinkerCad", "try to edit the STL in stead of the SVG file. Maybe I", "couple of mm high. I cannot figure out how to get this line", "So I could also try to edit the STL in stead of the", "to edit the STL in stead of the SVG file. Maybe I should", "this line drawing filled. I converted to SVG with Inkscape, used GIMP, took", "back to the original drawing and using the bucket tool. The result is", "a line drawing and I would like to print it a couple of", "Maybe I should print the original scanned image (TIFF) and then fill it", "black ink and then scan it and convert it to SVG but that", "drawing and using the bucket tool. The result is a rather noisy image", "filled in and ready to go? I use TinkerCad to convert to STL", "The result is a rather noisy image and I need it to be", "the original drawing and using the bucket tool. The result is a rather", "the original scanned image (TIFF) and then fill it by hand with black", "to go? I use TinkerCad to convert to STL and that works fine.", "SVG with Inkscape, used GIMP, took it online to TinkerCad and tried it", "a good SVG later on. Looks like it is more of a graphics", "SVG file. Maybe I should print the original scanned image (TIFF) and then", "smart way to get this filled in and ready to go? I use", "get this filled in and ready to go? I use TinkerCad to convert", "to convert to STL and that works fine. So I could also try", "and I would like to print it a couple of mm high. I", "also try to edit the STL in stead of the SVG file. Maybe", "to SVG but that sounds really dumb. [![should be SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I went", "a rather noisy image and I need it to be sharp and tight", "to SVG with Inkscape, used GIMP, took it online to TinkerCad and tried", "cannot figure out how to get this line drawing filled. I converted to", "I ever get is just the line and this does not work well", "TinkerCad to convert to STL and that works fine. So I could also", "figure out how to get this line drawing filled. I converted to SVG", "UPDATE I went back to the original drawing and using the bucket tool.", "noisy image and I need it to be sharp and tight to be", "to be sharp and tight to be able to convert it to a", "like it is more of a graphics design question now.. <https://graphicdesign.stackexchange.com/questions/94773/from-drawing-to-3d-print> [![enter image", "but all I ever get is just the line and this does not", "tried it with Onshape but all I ever get is just the line", "out how to get this line drawing filled. I converted to SVG with", "edit the STL in stead of the SVG file. Maybe I should print", "like to print it a couple of mm high. I cannot figure out", "high. I cannot figure out how to get this line drawing filled. I", "I should print the original scanned image (TIFF) and then fill it by", "is more of a graphics design question now.. <https://graphicdesign.stackexchange.com/questions/94773/from-drawing-to-3d-print> [![enter image description here](https://i.stack.imgur.com/jakBT.png)](https://i.stack.imgur.com/jakBT.png)", "Looks like it is more of a graphics design question now.. <https://graphicdesign.stackexchange.com/questions/94773/from-drawing-to-3d-print> [![enter", "it with Onshape but all I ever get is just the line and", "Inkscape, used GIMP, took it online to TinkerCad and tried it with Onshape", "ink and then scan it and convert it to SVG but that sounds", "just the line and this does not work well on my printer. What", "to the original drawing and using the bucket tool. The result is a", "get is just the line and this does not work well on my", "rather noisy image and I need it to be sharp and tight to", "with Inkscape, used GIMP, took it online to TinkerCad and tried it with", "tool. The result is a rather noisy image and I need it to", "the line and this does not work well on my printer. What is", "is just the line and this does not work well on my printer.", "STL in stead of the SVG file. Maybe I should print the original", "in stead of the SVG file. Maybe I should print the original scanned", "convert it to a good SVG later on. Looks like it is more", "to get this line drawing filled. I converted to SVG with Inkscape, used", "in and ready to go? I use TinkerCad to convert to STL and", "be able to convert it to a good SVG later on. Looks like", "on my printer. What is a smart way to get this filled in", "convert to STL and that works fine. So I could also try to", "this does not work well on my printer. What is a smart way", "SVG](https://i.stack.imgur.com/qzDoY.png)](https://i.stack.imgur.com/qzDoY.png) UPDATE I went back to the original drawing and using the bucket", "hand with black ink and then scan it and convert it to SVG", "could also try to edit the STL in stead of the SVG file.", "all I ever get is just the line and this does not work", "I would like to print it a couple of mm high. I cannot", "fill it by hand with black ink and then scan it and convert", "get this line drawing filled. I converted to SVG with Inkscape, used GIMP," ]
[ "with new resin. * Upping base-layer cure-time from from 30seconds up to 3", "Draken) for a couple weeks now printing in makerjuice waxcast. . I have", "the models while curing on the bottom of the resin tray. I have", "the resin tray. I have noticed that printing objects with a larger projection", "tray. Usually it seems ~10 layers are built before my baseplate breaks away.", "I have been working with our SLA printer (Facture Draken) for a couple", "objects with a larger projection area are more likely to stick in the", "tear force. Anyone with experience got more suggestions on how to continue troubleshooting?", "I have had some successful prints, but the majority (80%) end up as", "with the tray. Usually it seems ~10 layers are built before my baseplate", "successful prints, but the majority (80%) end up as pancakes stuck to the", "rather than from a long edge to reduce initial tear force. Anyone with", "long edge to reduce initial tear force. Anyone with experience got more suggestions", "makerjuice waxcast. . I have had some successful prints, but the majority (80%)", "on the build plate, but most of the times I place them on", "them on supports which stem from a square baseplate. It seems clear to", "vat. I assume this is because of the increased contact with the tray.", "flat on the build plate, but most of the times I place them", "of the increased contact with the tray. Usually it seems ~10 layers are", "with 80 grit sandpaper. * Emptying the resin tray and replacing with new", "and variations between. * Upping base-layer count from 2 to 4. * Rotating", "corner rather than from a long edge to reduce initial tear force. Anyone", "while curing on the bottom of the resin tray. I have noticed that", "have tried * Pulling out the build plate, cleaning it with Acetone. Sanding", "Upping base-layer cure-time from from 30seconds up to 3 minutes, and variations between.", "with our SLA printer (Facture Draken) for a couple weeks now printing in", "Rotating model base 45% to start the tray peel process from a corner", "a larger projection area are more likely to stick in the vat. I", "the resin tray. Some others break in half mid print. I have experimented", "up to 3 minutes, and variations between. * Upping base-layer count from 2", "45% to start the tray peel process from a corner rather than from", "resin tray. I have noticed that printing objects with a larger projection area", "with a larger projection area are more likely to stick in the vat.", "working with our SLA printer (Facture Draken) for a couple weeks now printing", "majority (80%) end up as pancakes stuck to the bottom of the resin", "cure-time from from 30seconds up to 3 minutes, and variations between. * Upping", "peel process from a corner rather than from a long edge to reduce", "mid print. I have experimented with laying my models (round circular diks) flat", "tried * Pulling out the build plate, cleaning it with Acetone. Sanding it", "are built before my baseplate breaks away. Things I have tried * Pulling", "build plate, cleaning it with Acetone. Sanding it with 80 grit sandpaper. ", "tray. I have noticed that printing objects with a larger projection area are", "a couple weeks now printing in makerjuice waxcast. . I have had some", "SLA printer (Facture Draken) for a couple weeks now printing in makerjuice waxcast.", "there is allot of force being put on the models while curing on", "from a corner rather than from a long edge to reduce initial tear", "variations between. Upping base-layer count from 2 to 4. * Rotating model", "bottom of the resin tray. Some others break in half mid print. I", "the tray peel process from a corner rather than from a long edge", "most of the times I place them on supports which stem from a", "of force being put on the models while curing on the bottom of", "models while curing on the bottom of the resin tray. I have noticed", "the increased contact with the tray. Usually it seems ~10 layers are built", "(round circular diks) flat on the build plate, but most of the times", "of the resin tray. I have noticed that printing objects with a larger", "have experimented with laying my models (round circular diks) flat on the build", "pancakes stuck to the bottom of the resin tray. Some others break in", "printing in makerjuice waxcast. . I have had some successful prints, but the", "resin. * Upping base-layer cure-time from from 30seconds up to 3 minutes, and", "on supports which stem from a square baseplate. It seems clear to me", "3 minutes, and variations between. * Upping base-layer count from 2 to 4.", "end up as pancakes stuck to the bottom of the resin tray. Some", "circular diks) flat on the build plate, but most of the times I", "stick in the vat. I assume this is because of the increased contact", "curing on the bottom of the resin tray. I have noticed that printing", "from 2 to 4. * Rotating model base 45% to start the tray", "in the vat. I assume this is because of the increased contact with", "my models (round circular diks) flat on the build plate, but most of", "are more likely to stick in the vat. I assume this is because", "this is because of the increased contact with the tray. Usually it seems", "resin tray and replacing with new resin. * Upping base-layer cure-time from from", "seems clear to me that there is allot of force being put on", "80 grit sandpaper. * Emptying the resin tray and replacing with new resin.", "* Emptying the resin tray and replacing with new resin. * Upping base-layer", "baseplate. It seems clear to me that there is allot of force being", "to start the tray peel process from a corner rather than from a", "waxcast. . I have had some successful prints, but the majority (80%) end", "the resin tray and replacing with new resin. * Upping base-layer cure-time from", "is because of the increased contact with the tray. Usually it seems ~10", "but the majority (80%) end up as pancakes stuck to the bottom of", "to me that there is allot of force being put on the models", "edge to reduce initial tear force. Anyone with experience got more suggestions on", "area are more likely to stick in the vat. I assume this is", "printing objects with a larger projection area are more likely to stick in", "I have tried * Pulling out the build plate, cleaning it with Acetone.", "new resin. * Upping base-layer cure-time from from 30seconds up to 3 minutes,", "Upping base-layer count from 2 to 4. * Rotating model base 45% to", "reduce initial tear force. Anyone with experience got more suggestions on how to", "for a couple weeks now printing in makerjuice waxcast. . I have had", "(80%) end up as pancakes stuck to the bottom of the resin tray.", "up as pancakes stuck to the bottom of the resin tray. Some others", "increased contact with the tray. Usually it seems ~10 layers are built before", "laying my models (round circular diks) flat on the build plate, but most", "the build plate, but most of the times I place them on supports", "It seems clear to me that there is allot of force being put", "to the bottom of the resin tray. Some others break in half mid", "put on the models while curing on the bottom of the resin tray.", "have been working with our SLA printer (Facture Draken) for a couple weeks", "baseplate breaks away. Things I have tried * Pulling out the build plate,", "my baseplate breaks away. Things I have tried * Pulling out the build", "to 3 minutes, and variations between. * Upping base-layer count from 2 to", "in makerjuice waxcast. . I have had some successful prints, but the majority", "~10 layers are built before my baseplate breaks away. Things I have tried", "place them on supports which stem from a square baseplate. It seems clear", "minutes, and variations between. * Upping base-layer count from 2 to 4. ", "in half mid print. I have experimented with laying my models (round circular", "square baseplate. It seems clear to me that there is allot of force", "before my baseplate breaks away. Things I have tried Pulling out the", "have noticed that printing objects with a larger projection area are more likely", "from 30seconds up to 3 minutes, and variations between. * Upping base-layer count", "to reduce initial tear force. Anyone with experience got more suggestions on how", "force being put on the models while curing on the bottom of the", "of the times I place them on supports which stem from a square", "base-layer cure-time from from 30seconds up to 3 minutes, and variations between. ", "supports which stem from a square baseplate. It seems clear to me that", "layers are built before my baseplate breaks away. Things I have tried ", "weeks now printing in makerjuice waxcast. . I have had some successful prints,", "plate, cleaning it with Acetone. Sanding it with 80 grit sandpaper. * Emptying", "times I place them on supports which stem from a square baseplate. It", "process from a corner rather than from a long edge to reduce initial", "the times I place them on supports which stem from a square baseplate.", "models (round circular diks) flat on the build plate, but most of the", "half mid print. I have experimented with laying my models (round circular diks)", "clear to me that there is allot of force being put on the", "the majority (80%) end up as pancakes stuck to the bottom of the", "but most of the times I place them on supports which stem from", "on the bottom of the resin tray. I have noticed that printing objects", "prints, but the majority (80%) end up as pancakes stuck to the bottom", "being put on the models while curing on the bottom of the resin", "tray and replacing with new resin. * Upping base-layer cure-time from from 30seconds", "others break in half mid print. I have experimented with laying my models", "larger projection area are more likely to stick in the vat. I assume", "that printing objects with a larger projection area are more likely to stick", "bottom of the resin tray. I have noticed that printing objects with a", "allot of force being put on the models while curing on the bottom", "which stem from a square baseplate. It seems clear to me that there", "to 4. * Rotating model base 45% to start the tray peel process", "projection area are more likely to stick in the vat. I assume this", "contact with the tray. Usually it seems ~10 layers are built before my", "I assume this is because of the increased contact with the tray. Usually", "Acetone. Sanding it with 80 grit sandpaper. * Emptying the resin tray and", "sandpaper. * Emptying the resin tray and replacing with new resin. * Upping", "away. Things I have tried * Pulling out the build plate, cleaning it", "2 to 4. * Rotating model base 45% to start the tray peel", "as pancakes stuck to the bottom of the resin tray. Some others break", "it seems ~10 layers are built before my baseplate breaks away. Things I", "assume this is because of the increased contact with the tray. Usually it", "Some others break in half mid print. I have experimented with laying my", "plate, but most of the times I place them on supports which stem", "grit sandpaper. * Emptying the resin tray and replacing with new resin. ", "from a square baseplate. It seems clear to me that there is allot", "build plate, but most of the times I place them on supports which", " Rotating model base 45% to start the tray peel process from a", "a square baseplate. It seems clear to me that there is allot of", "model base 45% to start the tray peel process from a corner rather", "the tray. Usually it seems ~10 layers are built before my baseplate breaks", "some successful prints, but the majority (80%) end up as pancakes stuck to", "on the models while curing on the bottom of the resin tray. I", "it with 80 grit sandpaper. * Emptying the resin tray and replacing with", "break in half mid print. I have experimented with laying my models (round", "couple weeks now printing in makerjuice waxcast. . I have had some successful", "I have noticed that printing objects with a larger projection area are more", "count from 2 to 4. * Rotating model base 45% to start the", "and replacing with new resin. * Upping base-layer cure-time from from 30seconds up", ". I have had some successful prints, but the majority (80%) end up", "with laying my models (round circular diks) flat on the build plate, but", "Things I have tried * Pulling out the build plate, cleaning it with", "start the tray peel process from a corner rather than from a long", "of the resin tray. Some others break in half mid print. I have", "is allot of force being put on the models while curing on the", "* Pulling out the build plate, cleaning it with Acetone. Sanding it with", "the bottom of the resin tray. Some others break in half mid print.", "breaks away. Things I have tried * Pulling out the build plate, cleaning", "the vat. I assume this is because of the increased contact with the", "experimented with laying my models (round circular diks) flat on the build plate,", "the bottom of the resin tray. I have noticed that printing objects with", "built before my baseplate breaks away. Things I have tried * Pulling out", "* Upping base-layer count from 2 to 4. * Rotating model base 45%", "I place them on supports which stem from a square baseplate. It seems", "print. I have experimented with laying my models (round circular diks) flat on", "Usually it seems ~10 layers are built before my baseplate breaks away. Things", "have had some successful prints, but the majority (80%) end up as pancakes", "me that there is allot of force being put on the models while", "noticed that printing objects with a larger projection area are more likely to", "diks) flat on the build plate, but most of the times I place", "a long edge to reduce initial tear force. Anyone with experience got more", "now printing in makerjuice waxcast. . I have had some successful prints, but", "our SLA printer (Facture Draken) for a couple weeks now printing in makerjuice", "initial tear force. Anyone with experience got more suggestions on how to continue", "stem from a square baseplate. It seems clear to me that there is", "out the build plate, cleaning it with Acetone. Sanding it with 80 grit", "replacing with new resin. * Upping base-layer cure-time from from 30seconds up to", "30seconds up to 3 minutes, and variations between. * Upping base-layer count from", "had some successful prints, but the majority (80%) end up as pancakes stuck", "tray. Some others break in half mid print. I have experimented with laying", "than from a long edge to reduce initial tear force. Anyone with experience", "it with Acetone. Sanding it with 80 grit sandpaper. * Emptying the resin", "from from 30seconds up to 3 minutes, and variations between. * Upping base-layer", "likely to stick in the vat. I assume this is because of the", "because of the increased contact with the tray. Usually it seems ~10 layers", "* Upping base-layer cure-time from from 30seconds up to 3 minutes, and variations", "with Acetone. Sanding it with 80 grit sandpaper. * Emptying the resin tray", "Pulling out the build plate, cleaning it with Acetone. Sanding it with 80", "4. * Rotating model base 45% to start the tray peel process from", "I have experimented with laying my models (round circular diks) flat on the", "stuck to the bottom of the resin tray. Some others break in half", "resin tray. Some others break in half mid print. I have experimented with", "to stick in the vat. I assume this is because of the increased", "more likely to stick in the vat. I assume this is because of", "been working with our SLA printer (Facture Draken) for a couple weeks now", "Sanding it with 80 grit sandpaper. * Emptying the resin tray and replacing", "cleaning it with Acetone. Sanding it with 80 grit sandpaper. * Emptying the", "a corner rather than from a long edge to reduce initial tear force.", "tray peel process from a corner rather than from a long edge to", "from a long edge to reduce initial tear force. Anyone with experience got", "base-layer count from 2 to 4. * Rotating model base 45% to start", "base 45% to start the tray peel process from a corner rather than", "between. * Upping base-layer count from 2 to 4. * Rotating model base", "(Facture Draken) for a couple weeks now printing in makerjuice waxcast. . I", "that there is allot of force being put on the models while curing", "seems ~10 layers are built before my baseplate breaks away. Things I have", "printer (Facture Draken) for a couple weeks now printing in makerjuice waxcast. .", "Emptying the resin tray and replacing with new resin. * Upping base-layer cure-time", "the build plate, cleaning it with Acetone. Sanding it with 80 grit sandpaper." ]
[ "3d printing machine. * Workforce * Technology * Money * etc. I'm an", "I'm an undergrad and my friends and I would like to make a", "Workforce * Technology * Money * etc. I'm an undergrad and my friends", "printer for a project. We wanted to get an idea of the prerequisites", "a 3d printing machine. * Workforce * Technology * Money * etc. I'm", "* Technology * Money * etc. I'm an undergrad and my friends and", "printing machine. * Workforce * Technology * Money * etc. I'm an undergrad", "needed to build a 3d printing machine. * Workforce * Technology * Money", "basic necessities needed to build a 3d printing machine. * Workforce * Technology", "to make a printer for a project. We wanted to get an idea", "* Workforce * Technology * Money * etc. I'm an undergrad and my", "What are the basic necessities needed to build a 3d printing machine. ", "build a 3d printing machine. Workforce * Technology * Money * etc.", "and I would like to make a printer for a project. We wanted", "and my friends and I would like to make a printer for a", "necessities needed to build a 3d printing machine. * Workforce * Technology ", " etc. I'm an undergrad and my friends and I would like to", "Money * etc. I'm an undergrad and my friends and I would like", "for a project. We wanted to get an idea of the prerequisites for", "machine. * Workforce * Technology * Money * etc. I'm an undergrad and", "are the basic necessities needed to build a 3d printing machine. * Workforce", "like to make a printer for a project. We wanted to get an", "an undergrad and my friends and I would like to make a printer", "a project. We wanted to get an idea of the prerequisites for this", "my friends and I would like to make a printer for a project.", "make a printer for a project. We wanted to get an idea of", "would like to make a printer for a project. We wanted to get", "* Money * etc. I'm an undergrad and my friends and I would", "the basic necessities needed to build a 3d printing machine. * Workforce ", "etc. I'm an undergrad and my friends and I would like to make", "undergrad and my friends and I would like to make a printer for", "friends and I would like to make a printer for a project. We", "a printer for a project. We wanted to get an idea of the", "to build a 3d printing machine. Workforce * Technology * Money ", "Technology Money * etc. I'm an undergrad and my friends and I", "project. We wanted to get an idea of the prerequisites for this work.", "I would like to make a printer for a project. We wanted to" ]
[ "about 4 metres. I would probably want to print a benchy, so that", "am mostly interested in producing functional (not decorative) pieces. I do not have", "that there is only 10 metres of each to play with? Just printing", "filament samples (each sample is 10m x 1.75mm). How should I test the", "each to play with? Just printing a benchy will use about 4 metres.", "that leaves 6 metres to play with. I am mostly interested in producing", "I test the samples, given that there is only 10 metres of each", "sample is 10m x 1.75mm). How should I test the samples, given that", "the samples, given that there is only 10 metres of each to play", "probably want to print a benchy, so that leaves 6 metres to play", "(each sample is 10m x 1.75mm). How should I test the samples, given", "with. I am mostly interested in producing functional (not decorative) pieces. I do", "play with? Just printing a benchy will use about 4 metres. I would", "ordered some filament samples (each sample is 10m x 1.75mm). How should I", "metres of each to play with? Just printing a benchy will use about", "should I test the samples, given that there is only 10 metres of", "test the samples, given that there is only 10 metres of each to", "there is only 10 metres of each to play with? Just printing a", "4 metres. I would probably want to print a benchy, so that leaves", "metres. I would probably want to print a benchy, so that leaves 6", "6 metres to play with. I am mostly interested in producing functional (not", "use about 4 metres. I would probably want to print a benchy, so", "given that there is only 10 metres of each to play with? Just", "metres to play with. I am mostly interested in producing functional (not decorative)", "interested in producing functional (not decorative) pieces. I do not have a heated", "How should I test the samples, given that there is only 10 metres", "so that leaves 6 metres to play with. I am mostly interested in", "only 10 metres of each to play with? Just printing a benchy will", "I am mostly interested in producing functional (not decorative) pieces. I do not", "have just ordered some filament samples (each sample is 10m x 1.75mm). How", "with? Just printing a benchy will use about 4 metres. I would probably", "Just printing a benchy will use about 4 metres. I would probably want", "I would probably want to print a benchy, so that leaves 6 metres", "10m x 1.75mm). How should I test the samples, given that there is", "of each to play with? Just printing a benchy will use about 4", "will use about 4 metres. I would probably want to print a benchy,", "benchy will use about 4 metres. I would probably want to print a", "a benchy, so that leaves 6 metres to play with. I am mostly", "play with. I am mostly interested in producing functional (not decorative) pieces. I", "1.75mm). How should I test the samples, given that there is only 10", "is 10m x 1.75mm). How should I test the samples, given that there", "to play with? Just printing a benchy will use about 4 metres. I", "10 metres of each to play with? Just printing a benchy will use", "to play with. I am mostly interested in producing functional (not decorative) pieces.", "just ordered some filament samples (each sample is 10m x 1.75mm). How should", "mostly interested in producing functional (not decorative) pieces. I do not have a", "samples, given that there is only 10 metres of each to play with?", "is only 10 metres of each to play with? Just printing a benchy", "in producing functional (not decorative) pieces. I do not have a heated bed.", "want to print a benchy, so that leaves 6 metres to play with.", "benchy, so that leaves 6 metres to play with. I am mostly interested", "some filament samples (each sample is 10m x 1.75mm). How should I test", "leaves 6 metres to play with. I am mostly interested in producing functional", "print a benchy, so that leaves 6 metres to play with. I am", "printing a benchy will use about 4 metres. I would probably want to", "would probably want to print a benchy, so that leaves 6 metres to", "to print a benchy, so that leaves 6 metres to play with. I", "I have just ordered some filament samples (each sample is 10m x 1.75mm).", "a benchy will use about 4 metres. I would probably want to print", "x 1.75mm). How should I test the samples, given that there is only", "samples (each sample is 10m x 1.75mm). How should I test the samples," ]
[ "quality degraded, it makes some loose structure. Edit: After finish I noticed that", "printing quality degraded, it makes some loose structure. Edit: After finish I noticed", "40 mm/s speed, 60c bed temp, 200c extruder temp). After 1.5 hours of", "0.1 mm layer, 40 mm/s speed, 60c bed temp, 200c extruder temp). After", "mm/s speed, 60c bed temp, 200c extruder temp). After 1.5 hours of printing", "bed temp, 200c extruder temp). After 1.5 hours of printing quality degraded, it", "is no problem on layers where it print continuously. What is the reason", "reason can be and how can I fix that? [![enter image description here](https://i.stack.imgur.com/W90dj.jpg)](https://i.stack.imgur.com/W90dj.jpg)", "1.5 hours of printing quality degraded, it makes some loose structure. Edit: After", "hours of printing quality degraded, it makes some loose structure. Edit: After finish", "guess 0.1 mm layer, 40 mm/s speed, 60c bed temp, 200c extruder temp).", "Testing my new Wanhao i3+. PLA plastic(Wanhao), basic normal quality settings in Cura", "60c bed temp, 200c extruder temp). After 1.5 hours of printing quality degraded,", "After 1.5 hours of printing quality degraded, it makes some loose structure. Edit:", "structure. Edit: After finish I noticed that problem exists only in layers where", "Edit: After finish I noticed that problem exists only in layers where it", "There is no problem on layers where it print continuously. What is the", "200c extruder temp). After 1.5 hours of printing quality degraded, it makes some", "After finish I noticed that problem exists only in layers where it cycles", "no problem on layers where it print continuously. What is the reason can", "layers where it print continuously. What is the reason can be and how", "it print continuously. What is the reason can be and how can I", "temp, 200c extruder temp). After 1.5 hours of printing quality degraded, it makes", "that problem exists only in layers where it cycles printing/no printing. There is", "continuously. What is the reason can be and how can I fix that?", "the reason can be and how can I fix that? [![enter image description", "some loose structure. Edit: After finish I noticed that problem exists only in", "i3+. PLA plastic(Wanhao), basic normal quality settings in Cura (I guess 0.1 mm", "(I guess 0.1 mm layer, 40 mm/s speed, 60c bed temp, 200c extruder", "where it cycles printing/no printing. There is no problem on layers where it", "exists only in layers where it cycles printing/no printing. There is no problem", "new Wanhao i3+. PLA plastic(Wanhao), basic normal quality settings in Cura (I guess", "PLA plastic(Wanhao), basic normal quality settings in Cura (I guess 0.1 mm layer,", "cycles printing/no printing. There is no problem on layers where it print continuously.", "layer, 40 mm/s speed, 60c bed temp, 200c extruder temp). After 1.5 hours", "problem exists only in layers where it cycles printing/no printing. There is no", "print continuously. What is the reason can be and how can I fix", "layers where it cycles printing/no printing. There is no problem on layers where", "mm layer, 40 mm/s speed, 60c bed temp, 200c extruder temp). After 1.5", "it cycles printing/no printing. There is no problem on layers where it print", "Cura (I guess 0.1 mm layer, 40 mm/s speed, 60c bed temp, 200c", "printing. There is no problem on layers where it print continuously. What is", "plastic(Wanhao), basic normal quality settings in Cura (I guess 0.1 mm layer, 40", "temp). After 1.5 hours of printing quality degraded, it makes some loose structure.", "on layers where it print continuously. What is the reason can be and", "basic normal quality settings in Cura (I guess 0.1 mm layer, 40 mm/s", "speed, 60c bed temp, 200c extruder temp). After 1.5 hours of printing quality", "extruder temp). After 1.5 hours of printing quality degraded, it makes some loose", "finish I noticed that problem exists only in layers where it cycles printing/no", "only in layers where it cycles printing/no printing. There is no problem on", "printing/no printing. There is no problem on layers where it print continuously. What", "problem on layers where it print continuously. What is the reason can be", "it makes some loose structure. Edit: After finish I noticed that problem exists", "I noticed that problem exists only in layers where it cycles printing/no printing.", "normal quality settings in Cura (I guess 0.1 mm layer, 40 mm/s speed,", "noticed that problem exists only in layers where it cycles printing/no printing. There", "quality settings in Cura (I guess 0.1 mm layer, 40 mm/s speed, 60c", "loose structure. Edit: After finish I noticed that problem exists only in layers", "What is the reason can be and how can I fix that? [![enter", "in Cura (I guess 0.1 mm layer, 40 mm/s speed, 60c bed temp,", "is the reason can be and how can I fix that? [![enter image", "my new Wanhao i3+. PLA plastic(Wanhao), basic normal quality settings in Cura (I", "makes some loose structure. Edit: After finish I noticed that problem exists only", "in layers where it cycles printing/no printing. There is no problem on layers", "settings in Cura (I guess 0.1 mm layer, 40 mm/s speed, 60c bed", "where it print continuously. What is the reason can be and how can", "degraded, it makes some loose structure. Edit: After finish I noticed that problem", "of printing quality degraded, it makes some loose structure. Edit: After finish I", "Wanhao i3+. PLA plastic(Wanhao), basic normal quality settings in Cura (I guess 0.1" ]
[ "that is why I am trying these other outputs. These other outputs use", "about 0.75\" apart, and randomly the drive to the laser power supply is", "I am not printing, the pulses are perfect and I can control the", "and combinations of firmware settings, different USB cable and different USB ports on", "different timers in the 2560 as well. I have tried all sorts and", "the fan (D9) and ran into problems. So I tried P44, no good", "not printing, the pulses are perfect and I can control the pulse width", "group of vertical lines spaced about 0.75\" apart, and randomly the drive to", "apart, and randomly the drive to the laser power supply is either \"skipping\"", "south. This also occurs on D9 (fan) and that is why I am", "moving that things go south. This also occurs on D9 (fan) and that", "USB ports on my computer, with no change. What might I be missing?", "follows just fine. It is ONLY while I am printing and the steppers", "am trying to \"burn\" a group of vertical lines spaced about 0.75\" apart,", "trying to \"burn\" a group of vertical lines spaced about 0.75\" apart, and", "I am printing and the steppers are moving that things go south. This", "with M42 P6(or 44) S0 (to 255) and it follows just fine. It", "control pulse) or stretching the pulse. This results in missed burns and/or \"streaks\"", "ran into problems. So I tried P44, no good then P6 also not", "pulse) or stretching the pulse. This results in missed burns and/or \"streaks\" where", "different USB ports on my computer, with no change. What might I be", "supply is either \"skipping\" (missing the control pulse) or stretching the pulse. This", "0.75\" apart, and randomly the drive to the laser power supply is either", "also. When I am not printing, the pulses are perfect and I can", "and it follows just fine. It is ONLY while I am printing and", "a laser with the fan (D9) and ran into problems. So I tried", "while I am printing and the steppers are moving that things go south.", "go south. This also occurs on D9 (fan) and that is why I", "using Marlin 1.1.4 on a RAMPS 1.4 board (clone) on an Arduino close", "turn off. I am using Marlin 1.1.4 on a RAMPS 1.4 board (clone)", "(clone) on an Arduino close also. When I am not printing, the pulses", "of vertical lines spaced about 0.75\" apart, and randomly the drive to the", "perfect and I can control the pulse width with M42 P6(or 44) S0", "So I tried P44, no good then P6 also not good.\\ What my", "and the steppers are moving that things go south. This also occurs on", "why I am trying these other outputs. These other outputs use different timers", "It is ONLY while I am printing and the steppers are moving that", "P6 also not good.\\ What my problem is I am trying to \"burn\"", "other outputs. These other outputs use different timers in the 2560 as well.", "2560 as well. I have tried all sorts and combinations of firmware settings,", "or stretching the pulse. This results in missed burns and/or \"streaks\" where the", "the pulse. This results in missed burns and/or \"streaks\" where the laser does", "What my problem is I am trying to \"burn\" a group of vertical", "This also occurs on D9 (fan) and that is why I am trying", "I am trying to \"burn\" a group of vertical lines spaced about 0.75\"", "I have tried all sorts and combinations of firmware settings, different USB cable", "my problem is I am trying to \"burn\" a group of vertical lines", "\"skipping\" (missing the control pulse) or stretching the pulse. This results in missed", "burns and/or \"streaks\" where the laser does not turn off. I am using", "then P6 also not good.\\ What my problem is I am trying to", "M42 P6(or 44) S0 (to 255) and it follows just fine. It is", "is I am trying to \"burn\" a group of vertical lines spaced about", "to the laser power supply is either \"skipping\" (missing the control pulse) or", "good.\\ What my problem is I am trying to \"burn\" a group of", "are perfect and I can control the pulse width with M42 P6(or 44)", "1.4 board (clone) on an Arduino close also. When I am not printing,", "(fan) and that is why I am trying these other outputs. These other", "other outputs use different timers in the 2560 as well. I have tried", "is either \"skipping\" (missing the control pulse) or stretching the pulse. This results", "board (clone) on an Arduino close also. When I am not printing, the", "outputs use different timers in the 2560 as well. I have tried all", "the laser does not turn off. I am using Marlin 1.1.4 on a", "pulse. This results in missed burns and/or \"streaks\" where the laser does not", "When I am not printing, the pulses are perfect and I can control", "a group of vertical lines spaced about 0.75\" apart, and randomly the drive", "steppers are moving that things go south. This also occurs on D9 (fan)", "and that is why I am trying these other outputs. These other outputs", "I am trying to control a laser with the fan (D9) and ran", "of firmware settings, different USB cable and different USB ports on my computer,", "am not printing, the pulses are perfect and I can control the pulse", "problems. So I tried P44, no good then P6 also not good.\\ What", "use different timers in the 2560 as well. I have tried all sorts", "tried P44, no good then P6 also not good.\\ What my problem is", "where the laser does not turn off. I am using Marlin 1.1.4 on", "laser with the fan (D9) and ran into problems. So I tried P44,", "not good.\\ What my problem is I am trying to \"burn\" a group", "all sorts and combinations of firmware settings, different USB cable and different USB", "results in missed burns and/or \"streaks\" where the laser does not turn off.", "Marlin 1.1.4 on a RAMPS 1.4 board (clone) on an Arduino close also.", "These other outputs use different timers in the 2560 as well. I have", "well. I have tried all sorts and combinations of firmware settings, different USB", "have tried all sorts and combinations of firmware settings, different USB cable and", "I can control the pulse width with M42 P6(or 44) S0 (to 255)", "1.1.4 on a RAMPS 1.4 board (clone) on an Arduino close also. When", "power supply is either \"skipping\" (missing the control pulse) or stretching the pulse.", "am trying to control a laser with the fan (D9) and ran into", "off. I am using Marlin 1.1.4 on a RAMPS 1.4 board (clone) on", "sorts and combinations of firmware settings, different USB cable and different USB ports", "randomly the drive to the laser power supply is either \"skipping\" (missing the", "also occurs on D9 (fan) and that is why I am trying these", "also not good.\\ What my problem is I am trying to \"burn\" a", "spaced about 0.75\" apart, and randomly the drive to the laser power supply", "laser power supply is either \"skipping\" (missing the control pulse) or stretching the", "the pulses are perfect and I can control the pulse width with M42", "on D9 (fan) and that is why I am trying these other outputs.", "trying these other outputs. These other outputs use different timers in the 2560", "the pulse width with M42 P6(or 44) S0 (to 255) and it follows", "into problems. So I tried P44, no good then P6 also not good.\\", "occurs on D9 (fan) and that is why I am trying these other", "to control a laser with the fan (D9) and ran into problems. So", "P44, no good then P6 also not good.\\ What my problem is I", "an Arduino close also. When I am not printing, the pulses are perfect", "lines spaced about 0.75\" apart, and randomly the drive to the laser power", "the 2560 as well. I have tried all sorts and combinations of firmware", "different USB cable and different USB ports on my computer, with no change.", "\"burn\" a group of vertical lines spaced about 0.75\" apart, and randomly the", "printing, the pulses are perfect and I can control the pulse width with", "control a laser with the fan (D9) and ran into problems. So I", "laser does not turn off. I am using Marlin 1.1.4 on a RAMPS", "a RAMPS 1.4 board (clone) on an Arduino close also. When I am", "are moving that things go south. This also occurs on D9 (fan) and", "no good then P6 also not good.\\ What my problem is I am", "good then P6 also not good.\\ What my problem is I am trying", "ONLY while I am printing and the steppers are moving that things go", "firmware settings, different USB cable and different USB ports on my computer, with", "P6(or 44) S0 (to 255) and it follows just fine. It is ONLY", "trying to control a laser with the fan (D9) and ran into problems.", "and I can control the pulse width with M42 P6(or 44) S0 (to", "width with M42 P6(or 44) S0 (to 255) and it follows just fine.", "the control pulse) or stretching the pulse. This results in missed burns and/or", "can control the pulse width with M42 P6(or 44) S0 (to 255) and", "\"streaks\" where the laser does not turn off. I am using Marlin 1.1.4", "(missing the control pulse) or stretching the pulse. This results in missed burns", "This results in missed burns and/or \"streaks\" where the laser does not turn", "does not turn off. I am using Marlin 1.1.4 on a RAMPS 1.4", "it follows just fine. It is ONLY while I am printing and the", "am using Marlin 1.1.4 on a RAMPS 1.4 board (clone) on an Arduino", "missed burns and/or \"streaks\" where the laser does not turn off. I am", "am printing and the steppers are moving that things go south. This also", "the drive to the laser power supply is either \"skipping\" (missing the control", "(to 255) and it follows just fine. It is ONLY while I am", "close also. When I am not printing, the pulses are perfect and I", "USB cable and different USB ports on my computer, with no change. What", "I am using Marlin 1.1.4 on a RAMPS 1.4 board (clone) on an", "and different USB ports on my computer, with no change. What might I", "outputs. These other outputs use different timers in the 2560 as well. I", "either \"skipping\" (missing the control pulse) or stretching the pulse. This results in", "fine. It is ONLY while I am printing and the steppers are moving", "just fine. It is ONLY while I am printing and the steppers are", "to \"burn\" a group of vertical lines spaced about 0.75\" apart, and randomly", "RAMPS 1.4 board (clone) on an Arduino close also. When I am not", "on a RAMPS 1.4 board (clone) on an Arduino close also. When I", "timers in the 2560 as well. I have tried all sorts and combinations", "on an Arduino close also. When I am not printing, the pulses are", "(D9) and ran into problems. So I tried P44, no good then P6", "fan (D9) and ran into problems. So I tried P44, no good then", "in missed burns and/or \"streaks\" where the laser does not turn off. I", "pulse width with M42 P6(or 44) S0 (to 255) and it follows just", "cable and different USB ports on my computer, with no change. What might", "and randomly the drive to the laser power supply is either \"skipping\" (missing", "not turn off. I am using Marlin 1.1.4 on a RAMPS 1.4 board", "tried all sorts and combinations of firmware settings, different USB cable and different", "S0 (to 255) and it follows just fine. It is ONLY while I", "255) and it follows just fine. It is ONLY while I am printing", "things go south. This also occurs on D9 (fan) and that is why", "with the fan (D9) and ran into problems. So I tried P44, no", "the steppers are moving that things go south. This also occurs on D9", "stretching the pulse. This results in missed burns and/or \"streaks\" where the laser", "problem is I am trying to \"burn\" a group of vertical lines spaced", "that things go south. This also occurs on D9 (fan) and that is", "as well. I have tried all sorts and combinations of firmware settings, different", "these other outputs. These other outputs use different timers in the 2560 as", "Arduino close also. When I am not printing, the pulses are perfect and", "is ONLY while I am printing and the steppers are moving that things", "settings, different USB cable and different USB ports on my computer, with no", "44) S0 (to 255) and it follows just fine. It is ONLY while", "and ran into problems. So I tried P44, no good then P6 also", "drive to the laser power supply is either \"skipping\" (missing the control pulse)", "D9 (fan) and that is why I am trying these other outputs. These", "I tried P44, no good then P6 also not good.\\ What my problem", "is why I am trying these other outputs. These other outputs use different", "I am trying these other outputs. These other outputs use different timers in", "am trying these other outputs. These other outputs use different timers in the", "the laser power supply is either \"skipping\" (missing the control pulse) or stretching", "and/or \"streaks\" where the laser does not turn off. I am using Marlin", "pulses are perfect and I can control the pulse width with M42 P6(or", "control the pulse width with M42 P6(or 44) S0 (to 255) and it", "in the 2560 as well. I have tried all sorts and combinations of", "vertical lines spaced about 0.75\" apart, and randomly the drive to the laser", "combinations of firmware settings, different USB cable and different USB ports on my", "printing and the steppers are moving that things go south. This also occurs" ]
[ "plate. This would extend over the edge of the aluminum bed. Will the", "like to do and I think I could adjust to settings and end", "heated aluminum bed and I print with a Borosilicate glass plate. I have", "and end stop to stretch the y-dimension travel and I have found a", "229x257 mm plate. This would extend over the edge of the aluminum bed.", "and mass of the glass plate be sufficient to still keep the bed", "to settings and end stop to stretch the y-dimension travel and I have", "stretch the y-dimension travel and I have found a 229x257 mm plate. This", "This would extend over the edge of the aluminum bed. Will the thermal", "and I have found a 229x257 mm plate. This would extend over the", "a TronXY printer (i3 Clone). It has a 220x220 mm heated aluminum bed", "and I think I could adjust to settings and end stop to stretch", "think I could adjust to settings and end stop to stretch the y-dimension", "of the aluminum bed. Will the thermal conduction and mass of the glass", "mm) I would like to do and I think I could adjust to", "with a Borosilicate glass plate. I have a slightly longer print (245 mm)", "bed and I print with a Borosilicate glass plate. I have a slightly", "y-dimension travel and I have found a 229x257 mm plate. This would extend", "I could adjust to settings and end stop to stretch the y-dimension travel", "conduction and mass of the glass plate be sufficient to still keep the", "do and I think I could adjust to settings and end stop to", "have a TronXY printer (i3 Clone). It has a 220x220 mm heated aluminum", "thermal conduction and mass of the glass plate be sufficient to still keep", "slightly longer print (245 mm) I would like to do and I think", "print with a Borosilicate glass plate. I have a slightly longer print (245", "the y-dimension travel and I have found a 229x257 mm plate. This would", "plate. I have a slightly longer print (245 mm) I would like to", "mm heated aluminum bed and I print with a Borosilicate glass plate. I", "edge of the aluminum bed. Will the thermal conduction and mass of the", "adjust to settings and end stop to stretch the y-dimension travel and I", "I have found a 229x257 mm plate. This would extend over the edge", "longer print (245 mm) I would like to do and I think I", "could adjust to settings and end stop to stretch the y-dimension travel and", "a Borosilicate glass plate. I have a slightly longer print (245 mm) I", "glass plate. I have a slightly longer print (245 mm) I would like", "stop to stretch the y-dimension travel and I have found a 229x257 mm", "to stretch the y-dimension travel and I have found a 229x257 mm plate.", "220x220 mm heated aluminum bed and I print with a Borosilicate glass plate.", "of the glass plate be sufficient to still keep the bed warm enough?", "settings and end stop to stretch the y-dimension travel and I have found", "would extend over the edge of the aluminum bed. Will the thermal conduction", "mm plate. This would extend over the edge of the aluminum bed. Will", "a 229x257 mm plate. This would extend over the edge of the aluminum", "aluminum bed and I print with a Borosilicate glass plate. I have a", "printer (i3 Clone). It has a 220x220 mm heated aluminum bed and I", "the thermal conduction and mass of the glass plate be sufficient to still", "a 220x220 mm heated aluminum bed and I print with a Borosilicate glass", "extend over the edge of the aluminum bed. Will the thermal conduction and", "It has a 220x220 mm heated aluminum bed and I print with a", "I think I could adjust to settings and end stop to stretch the", "the edge of the aluminum bed. Will the thermal conduction and mass of", "have a slightly longer print (245 mm) I would like to do and", "print (245 mm) I would like to do and I think I could", "I have a slightly longer print (245 mm) I would like to do", "Borosilicate glass plate. I have a slightly longer print (245 mm) I would", "I print with a Borosilicate glass plate. I have a slightly longer print", "the aluminum bed. Will the thermal conduction and mass of the glass plate", "I have a TronXY printer (i3 Clone). It has a 220x220 mm heated", "(i3 Clone). It has a 220x220 mm heated aluminum bed and I print", "a slightly longer print (245 mm) I would like to do and I", "travel and I have found a 229x257 mm plate. This would extend over", "has a 220x220 mm heated aluminum bed and I print with a Borosilicate", "and I print with a Borosilicate glass plate. I have a slightly longer", "Clone). It has a 220x220 mm heated aluminum bed and I print with", "TronXY printer (i3 Clone). It has a 220x220 mm heated aluminum bed and", "would like to do and I think I could adjust to settings and", "have found a 229x257 mm plate. This would extend over the edge of", "mass of the glass plate be sufficient to still keep the bed warm", "over the edge of the aluminum bed. Will the thermal conduction and mass", "bed. Will the thermal conduction and mass of the glass plate be sufficient", "aluminum bed. Will the thermal conduction and mass of the glass plate be", "to do and I think I could adjust to settings and end stop", "Will the thermal conduction and mass of the glass plate be sufficient to", "found a 229x257 mm plate. This would extend over the edge of the", "(245 mm) I would like to do and I think I could adjust", "I would like to do and I think I could adjust to settings", "end stop to stretch the y-dimension travel and I have found a 229x257" ]
[ "change the direction a motor goes with G-code instead of reconfiguring Marlin firmware?", "Is there a way to change the direction a motor goes with G-code", "there a way to change the direction a motor goes with G-code instead", "a way to change the direction a motor goes with G-code instead of", "to change the direction a motor goes with G-code instead of reconfiguring Marlin", "way to change the direction a motor goes with G-code instead of reconfiguring" ]
[ "some feedback from all your experience with 3D printing and the hours of", "from all your experience with 3D printing and the hours of troubleshooting you've", "How do you troubleshoot issues and how long does it take? What would", "high school and I was hoping to do some market research regarding some", "get some feedback from all your experience with 3D printing and the hours", "feedback from all your experience with 3D printing and the hours of troubleshooting", "first layer, etc)? In your opinion, what are the biggest issues the desktop", "printing and the hours of troubleshooting you've likely encountered. What workarounds and aftermarket", "have to watch first layer, etc)? In your opinion, what are the biggest", "the MIT Launch startup accelerator for high school and I was hoping to", "MIT Launch startup accelerator for high school and I was hoping to do", "opinion, what are the biggest issues the desktop 3D printing industry faces? Just", "you could change one thing about your printer what would it be? How", "issues and how long does it take? What would make you more likely", "do some market research regarding some of the current problems with desktop 3D", "working with a group at the MIT Launch startup accelerator for high school", "workarounds and aftermarket modifications are the most useful? If you could change one", "likely encountered. What workarounds and aftermarket modifications are the most useful? If you", "encountered. What workarounds and aftermarket modifications are the most useful? If you could", "of troubleshooting you've likely encountered. What workarounds and aftermarket modifications are the most", "modifications are the most useful? If you could change one thing about your", "the biggest issues the desktop 3D printing industry faces? Just share any wishes,", "layer, etc)? In your opinion, what are the biggest issues the desktop 3D", "are the most useful? If you could change one thing about your printer", "with a group at the MIT Launch startup accelerator for high school and", "desktop 3D printing industry faces? Just share any wishes, thoughts, hopes, dreams, etc", "what are the biggest issues the desktop 3D printing industry faces? Just share", "could change one thing about your printer what would it be? How do", "accelerator for high school and I was hoping to do some market research", "take? What would make you more likely to 3d print more often (ie", "would it be? How do you troubleshoot issues and how long does it", "it take? What would make you more likely to 3d print more often", "I was hoping to do some market research regarding some of the current", "etc about 3D printing Thank you so much for your time and sharing", "3D printing and the hours of troubleshooting you've likely encountered. What workarounds and", "your printer what would it be? How do you troubleshoot issues and how", "of the current problems with desktop 3D printers. I was hoping to get", "faces? Just share any wishes, thoughts, hopes, dreams, etc about 3D printing Thank", "market research regarding some of the current problems with desktop 3D printers. I", "What would make you more likely to 3d print more often (ie never", "troubleshoot issues and how long does it take? What would make you more", "Launch startup accelerator for high school and I was hoping to do some", "and the hours of troubleshooting you've likely encountered. What workarounds and aftermarket modifications", "the most useful? If you could change one thing about your printer what", "some market research regarding some of the current problems with desktop 3D printers.", "your experience with 3D printing and the hours of troubleshooting you've likely encountered.", "(ie never clogged, didn't have to watch first layer, etc)? In your opinion,", "dreams, etc about 3D printing Thank you so much for your time and", "research regarding some of the current problems with desktop 3D printers. I was", "3D printing industry faces? Just share any wishes, thoughts, hopes, dreams, etc about", "what would it be? How do you troubleshoot issues and how long does", "the current problems with desktop 3D printers. I was hoping to get some", "biggest issues the desktop 3D printing industry faces? Just share any wishes, thoughts,", "it be? How do you troubleshoot issues and how long does it take?", "I was hoping to get some feedback from all your experience with 3D", "aftermarket modifications are the most useful? If you could change one thing about", "problems with desktop 3D printers. I was hoping to get some feedback from", "to 3d print more often (ie never clogged, didn't have to watch first", "Just share any wishes, thoughts, hopes, dreams, etc about 3D printing Thank you", "3D printing Thank you so much for your time and sharing your experience!", "regarding some of the current problems with desktop 3D printers. I was hoping", "and I was hoping to do some market research regarding some of the", "to get some feedback from all your experience with 3D printing and the", "etc)? In your opinion, what are the biggest issues the desktop 3D printing", "about your printer what would it be? How do you troubleshoot issues and", "printer what would it be? How do you troubleshoot issues and how long", "group at the MIT Launch startup accelerator for high school and I was", "at the MIT Launch startup accelerator for high school and I was hoping", "long does it take? What would make you more likely to 3d print", "What workarounds and aftermarket modifications are the most useful? If you could change", "more likely to 3d print more often (ie never clogged, didn't have to", "likely to 3d print more often (ie never clogged, didn't have to watch", "3d print more often (ie never clogged, didn't have to watch first layer,", "share any wishes, thoughts, hopes, dreams, etc about 3D printing Thank you so", "you've likely encountered. What workarounds and aftermarket modifications are the most useful? If", "one thing about your printer what would it be? How do you troubleshoot", "hoping to get some feedback from all your experience with 3D printing and", "print more often (ie never clogged, didn't have to watch first layer, etc)?", "for high school and I was hoping to do some market research regarding", "troubleshooting you've likely encountered. What workarounds and aftermarket modifications are the most useful?", "hoping to do some market research regarding some of the current problems with", "wishes, thoughts, hopes, dreams, etc about 3D printing Thank you so much for", "didn't have to watch first layer, etc)? In your opinion, what are the", "thing about your printer what would it be? How do you troubleshoot issues", "how long does it take? What would make you more likely to 3d", "useful? If you could change one thing about your printer what would it", "hours of troubleshooting you've likely encountered. What workarounds and aftermarket modifications are the", "some of the current problems with desktop 3D printers. I was hoping to", "and how long does it take? What would make you more likely to", "most useful? If you could change one thing about your printer what would", "startup accelerator for high school and I was hoping to do some market", "a group at the MIT Launch startup accelerator for high school and I", "with desktop 3D printers. I was hoping to get some feedback from all", "the hours of troubleshooting you've likely encountered. What workarounds and aftermarket modifications are", "to watch first layer, etc)? In your opinion, what are the biggest issues", "printers. I was hoping to get some feedback from all your experience with", "3D printers. I was hoping to get some feedback from all your experience", "thoughts, hopes, dreams, etc about 3D printing Thank you so much for your", "was hoping to do some market research regarding some of the current problems", "If you could change one thing about your printer what would it be?", "any wishes, thoughts, hopes, dreams, etc about 3D printing Thank you so much", "you troubleshoot issues and how long does it take? What would make you", "issues the desktop 3D printing industry faces? Just share any wishes, thoughts, hopes,", "your opinion, what are the biggest issues the desktop 3D printing industry faces?", "desktop 3D printers. I was hoping to get some feedback from all your", "printing industry faces? Just share any wishes, thoughts, hopes, dreams, etc about 3D", "with 3D printing and the hours of troubleshooting you've likely encountered. What workarounds", "industry faces? Just share any wishes, thoughts, hopes, dreams, etc about 3D printing", "do you troubleshoot issues and how long does it take? What would make", "all your experience with 3D printing and the hours of troubleshooting you've likely", "was hoping to get some feedback from all your experience with 3D printing", "never clogged, didn't have to watch first layer, etc)? In your opinion, what", "does it take? What would make you more likely to 3d print more", "watch first layer, etc)? In your opinion, what are the biggest issues the", "are the biggest issues the desktop 3D printing industry faces? Just share any", "be? How do you troubleshoot issues and how long does it take? What", "current problems with desktop 3D printers. I was hoping to get some feedback", "and aftermarket modifications are the most useful? If you could change one thing", "make you more likely to 3d print more often (ie never clogged, didn't", "you more likely to 3d print more often (ie never clogged, didn't have", "to do some market research regarding some of the current problems with desktop", "I'm working with a group at the MIT Launch startup accelerator for high", "In your opinion, what are the biggest issues the desktop 3D printing industry", "the desktop 3D printing industry faces? Just share any wishes, thoughts, hopes, dreams,", "often (ie never clogged, didn't have to watch first layer, etc)? In your", "school and I was hoping to do some market research regarding some of", "clogged, didn't have to watch first layer, etc)? In your opinion, what are", "more often (ie never clogged, didn't have to watch first layer, etc)? In", "would make you more likely to 3d print more often (ie never clogged,", "about 3D printing Thank you so much for your time and sharing your", "change one thing about your printer what would it be? How do you", "experience with 3D printing and the hours of troubleshooting you've likely encountered. What", "hopes, dreams, etc about 3D printing Thank you so much for your time" ]
[ "= Unclear where this comes from * Gantry Height = Unclear where this", "= RepRap (Marlin/Sprinter) -- Uncertain - please help confirm this Print Head Settings", "Y min = Unclear where this comes from** * X max = *Unclear", "z = 400 mm Build Plate = Rectangular * Machine Center is", "Heated Bed = Checked * G-code Flavor = RepRap (Marlin/Sprinter) -- Uncertain -", "to setup the CR-10 in the Cura Software I have following settings from", "from * Y min = Unclear where this comes from * X max", "= 400 mm * Build Plate = Rectangular * Machine Center is Zero", "I have following settings from research: Printer Settings * x = 300 mm", "Height = Unclear where this is measured from * Number of Extruders =", "is measured from** * Number of Extruders = 1 * Material Diameter -", "Software I have following settings from research: Printer Settings * x = 300", "= Checked * Heated Bed = Checked * G-code Flavor = RepRap (Marlin/Sprinter)", "300 mm * z = 400 mm * Build Plate = Rectangular ", "max = Unclear where this comes from* * Y max = Unclear where", "= Unclear where this comes from** * Y min = Unclear where this", "where this comes from * Y min = Unclear where this comes from", "Machine Center is Zero = Checked * Heated Bed = Checked * G-code", "find/confirm the information needed to setup the CR-10 in the Cura Software I", "the Cura Software I have following settings from research: Printer Settings * x", "is Zero = Checked * Heated Bed = Checked * G-code Flavor =", "Unclear where this comes from * Y min = *Unclear where this comes", "Build Plate = Rectangular Machine Center is Zero = Checked * Heated", "-- Uncertain - please help confirm this Print Head Settings * X min", "Rectangular * Machine Center is Zero = Checked * Heated Bed = Checked", "the information needed to setup the CR-10 in the Cura Software I have", "* Machine Center is Zero = Checked * Heated Bed = Checked ", "Settings* * x = 300 mm * y = 300 mm * z", "mm * y = 300 mm * z = 400 mm * Build", "* Number of Extruders = 1 * Material Diameter - 1.75 mm ", "= 1 Material Diameter - 1.75 mm * Nozzle size = 0.4", "Cura Software I have following settings from research: Printer Settings * x =", "this Print Head Settings** * X min = Unclear where this comes from", "= Rectangular * Machine Center is Zero = Checked * Heated Bed =", "Unclear where this comes from * Gantry Height = Unclear where this is", "settings from research: Printer Settings** * x = 300 mm * y =", "from** * Number of Extruders = 1 * Material Diameter - 1.75 mm", "needed to setup the CR-10 in the Cura Software I have following settings", "y = 300 mm * z = 400 mm * Build Plate =", "RepRap (Marlin/Sprinter) -- Uncertain - please help confirm this Print Head Settings ", " x = 300 mm * y = 300 mm * z =", "Unclear where this comes from * X max = Unclear where this comes", "from * X max = Unclear where this comes from * Y max", "Center is Zero = Checked * Heated Bed = Checked * G-code Flavor", "anyone help me find/confirm the information needed to setup the CR-10 in the", "measured from** * Number of Extruders = 1 * Material Diameter - 1.75", "X max = Unclear where this comes from * Y max = Unclear", "Printer Settings** * x = 300 mm * y = 300 mm ", "mm Build Plate = Rectangular * Machine Center is Zero = Checked", "Print Head Settings * X min = Unclear where this comes from ", "Checked Heated Bed = Checked * G-code Flavor = RepRap (Marlin/Sprinter) *--", "Checked G-code Flavor = RepRap (Marlin/Sprinter) -- Uncertain - please help confirm", "where this comes from * Y max = Unclear where this comes from", "Flavor = RepRap (Marlin/Sprinter) -- Uncertain - please help confirm this *Print Head", " Build Plate = Rectangular * Machine Center is Zero = Checked ", "max = Unclear where this comes from* * Gantry Height = Unclear where", "from * Y max = Unclear where this comes from * Gantry Height", "where this comes from** * Gantry Height = *Unclear where this is measured", "Can anyone help me find/confirm the information needed to setup the CR-10 in", "Extruders = 1 Material Diameter - 1.75 mm * Nozzle size =", "= Checked * G-code Flavor = RepRap (Marlin/Sprinter) -- Uncertain - please help", "Unclear where this comes from** * Y max = *Unclear where this comes", "mm z = 400 mm * Build Plate = Rectangular * Machine", "CR-10 in the Cura Software I have following settings from research: Printer Settings", "comes from** * Gantry Height = Unclear where this is measured from ", "1 Material Diameter - 1.75 mm * Nozzle size = 0.4 mm", "please help confirm this Print Head Settings** * X min = *Unclear where", " Heated Bed = Checked * G-code Flavor = RepRap (Marlin/Sprinter) *-- Uncertain", "Number of Extruders = 1 Material Diameter - 1.75 mm * Nozzle", "this is measured from** * Number of Extruders = 1 * Material Diameter", "* G-code Flavor = RepRap (Marlin/Sprinter) -- Uncertain - please help confirm this", "- please help confirm this Print Head Settings** * X min = Unclear", "(Marlin/Sprinter) -- Uncertain - please help confirm this Print Head Settings** * X", "have following settings from research: Printer Settings * x = 300 mm ", "min = Unclear where this comes from* * Y min = Unclear where", "following settings from research: Printer Settings** * x = 300 mm * y", "from research: Printer Settings * x = 300 mm * y = 300", "information needed to setup the CR-10 in the Cura Software I have following", "Bed = Checked * G-code Flavor = RepRap (Marlin/Sprinter) *-- Uncertain - please", " y = 300 mm * z = 400 mm * Build Plate", "from** * Gantry Height = Unclear where this is measured from * Number", "me find/confirm the information needed to setup the CR-10 in the Cura Software", "Settings** * X min = Unclear where this comes from * Y min", "G-code Flavor = RepRap (Marlin/Sprinter) -- Uncertain - please help confirm this Print", "Gantry Height = Unclear where this is measured from** * Number of Extruders", "where this comes from** * X max = Unclear where this comes from", "research: Printer Settings * x = 300 mm * y = 300 mm", "= Unclear where this comes from * Y max = *Unclear where this", "Zero = Checked Heated Bed = Checked * G-code Flavor = RepRap", "this comes from** * Y min = Unclear where this comes from ", "comes from* * Y min = Unclear where this comes from * X", "Unclear where this is measured from * Number of Extruders = 1 ", "help me find/confirm the information needed to setup the CR-10 in the Cura", "this comes from* * X max = Unclear where this comes from ", "in the Cura Software I have following settings from research: Printer Settings* ", "Head Settings* * X min = Unclear where this comes from * Y", "comes from** * X max = Unclear where this comes from * Y", "* X min = Unclear where this comes from * Y min =", "400 mm * Build Plate = Rectangular * Machine Center is Zero =", "= Unclear where this is measured from * Number of Extruders = 1", "min = Unclear where this comes from * X max = *Unclear where", " Y min = Unclear where this comes from * X max =", "this comes from** * Gantry Height = Unclear where this is measured from", "setup the CR-10 in the Cura Software I have following settings from research:", "300 mm * y = 300 mm * z = 400 mm ", "Uncertain - please help confirm this* Print Head Settings * X min =", "= Unclear where this comes from * X max = *Unclear where this", " Y max = Unclear where this comes from * Gantry Height =", "Plate = Rectangular * Machine Center is Zero = Checked * Heated Bed", "where this is measured from** * Number of Extruders = 1 * Material", "of Extruders = 1 * Material Diameter - 1.75 mm * Nozzle size", "the CR-10 in the Cura Software I have following settings from research: *Printer", "= 300 mm y = 300 mm * z = 400 mm", "* X max = Unclear where this comes from * Y max =", "= 300 mm * z = 400 mm * Build Plate = Rectangular", "X min = Unclear where this comes from * Y min = Unclear", "confirm this Print Head Settings * X min = Unclear where this comes", "help confirm this Print Head Settings * X min = Unclear where this", "comes from * Y max = Unclear where this comes from * Gantry", "* z = 400 mm * Build Plate = Rectangular * Machine Center", "x = 300 mm * y = 300 mm * z = 400", "Y max = Unclear where this comes from * Gantry Height = Unclear", "this comes from * Y max = Unclear where this comes from ", " Gantry Height = Unclear where this is measured from * Number of" ]
[ "Travel Speed: 80mm/s * Bottom Layer Speed: 20mm/s * Infill Speed: 50mm/s ", "which can speed up printing time? Or are there any other measures which", "measures which I can take in order to reduce printing time in general?", "better settings to use, especially ones which can speed up printing time? Or", "Outer shell speed: 15mm/s Inner shell speed: 30mm/s However, this doesn’t line", "speed: 30mm/s However, this doesn’t line up with their advertisements online of a", "manual shows [Cura] examples of: * Print speed: 50mm/s * Travel Speed: 80mm/s", "Monoprice Select IIIP Plus printer? The manual shows [Cura] examples of: * Print", "shell speed: 15mm/s * Inner shell speed: 30mm/s However, this doesn’t line up", "shell speed: 30mm/s However, this doesn’t line up with their advertisements online of", "* Infill Speed: 50mm/s * Outer shell speed: 15mm/s * Inner shell speed:", "doesn’t line up with their advertisements online of a 150mm/s printing speed. Are", "50mm/s * Outer shell speed: 15mm/s * Inner shell speed: 30mm/s However, this", "speed up printing time? Or are there any other measures which I can", "* Inner shell speed: 30mm/s However, this doesn’t line up with their advertisements", "Print speed: 50mm/s * Travel Speed: 80mm/s * Bottom Layer Speed: 20mm/s ", "line up with their advertisements online of a 150mm/s printing speed. Are there", "printing speed. Are there better settings to use, especially ones which can speed", "20mm/s Infill Speed: 50mm/s * Outer shell speed: 15mm/s * Inner shell", "Select IIIP Plus printer? The manual shows [Cura] examples of: * Print speed:", "up with their advertisements online of a 150mm/s printing speed. Are there better", "IIIP Plus printer? The manual shows [Cura] examples of: * Print speed: 50mm/s", "How do I speed up prints for the Monoprice Select IIIP Plus printer?", "* Print speed: 50mm/s * Travel Speed: 80mm/s * Bottom Layer Speed: 20mm/s", "* Outer shell speed: 15mm/s * Inner shell speed: 30mm/s However, this doesn’t", "Are there better settings to use, especially ones which can speed up printing", "50mm/s * Travel Speed: 80mm/s * Bottom Layer Speed: 20mm/s * Infill Speed:", "Speed: 50mm/s * Outer shell speed: 15mm/s * Inner shell speed: 30mm/s However,", "80mm/s * Bottom Layer Speed: 20mm/s * Infill Speed: 50mm/s * Outer shell", "a 150mm/s printing speed. Are there better settings to use, especially ones which", "the Monoprice Select IIIP Plus printer? The manual shows [Cura] examples of: ", "speed: 50mm/s Travel Speed: 80mm/s * Bottom Layer Speed: 20mm/s * Infill", "time? Or are there any other measures which I can take in order", "prints for the Monoprice Select IIIP Plus printer? The manual shows [Cura] examples", "Inner shell speed: 30mm/s However, this doesn’t line up with their advertisements online", "[Cura] examples of: * Print speed: 50mm/s * Travel Speed: 80mm/s * Bottom", "of a 150mm/s printing speed. Are there better settings to use, especially ones", "especially ones which can speed up printing time? Or are there any other", "for the Monoprice Select IIIP Plus printer? The manual shows [Cura] examples of:", "speed: 15mm/s * Inner shell speed: 30mm/s However, this doesn’t line up with", "Bottom Layer Speed: 20mm/s * Infill Speed: 50mm/s * Outer shell speed: 15mm/s", "of: * Print speed: 50mm/s * Travel Speed: 80mm/s * Bottom Layer Speed:", "Or are there any other measures which I can take in order to", "up prints for the Monoprice Select IIIP Plus printer? The manual shows [Cura]", "30mm/s However, this doesn’t line up with their advertisements online of a 150mm/s", "shows [Cura] examples of: * Print speed: 50mm/s * Travel Speed: 80mm/s ", "settings to use, especially ones which can speed up printing time? Or are", "150mm/s printing speed. Are there better settings to use, especially ones which can", "However, this doesn’t line up with their advertisements online of a 150mm/s printing", "printing time? Or are there any other measures which I can take in", "there any other measures which I can take in order to reduce printing", "15mm/s Inner shell speed: 30mm/s However, this doesn’t line up with their", "* Bottom Layer Speed: 20mm/s * Infill Speed: 50mm/s * Outer shell speed:", "this doesn’t line up with their advertisements online of a 150mm/s printing speed.", "Speed: 20mm/s * Infill Speed: 50mm/s * Outer shell speed: 15mm/s * Inner", "I speed up prints for the Monoprice Select IIIP Plus printer? The manual", "do I speed up prints for the Monoprice Select IIIP Plus printer? The", "Infill Speed: 50mm/s * Outer shell speed: 15mm/s * Inner shell speed: 30mm/s", "there better settings to use, especially ones which can speed up printing time?", "can speed up printing time? Or are there any other measures which I", "* Travel Speed: 80mm/s * Bottom Layer Speed: 20mm/s * Infill Speed: 50mm/s", "printer? The manual shows [Cura] examples of: * Print speed: 50mm/s * Travel", "any other measures which I can take in order to reduce printing time", "their advertisements online of a 150mm/s printing speed. Are there better settings to", "use, especially ones which can speed up printing time? Or are there any", "Plus printer? The manual shows [Cura] examples of: * Print speed: 50mm/s ", "speed. Are there better settings to use, especially ones which can speed up", "with their advertisements online of a 150mm/s printing speed. Are there better settings", "Layer Speed: 20mm/s Infill Speed: 50mm/s * Outer shell speed: 15mm/s ", "speed up prints for the Monoprice Select IIIP Plus printer? The manual shows", "up printing time? Or are there any other measures which I can take", "advertisements online of a 150mm/s printing speed. Are there better settings to use,", "examples of: Print speed: 50mm/s * Travel Speed: 80mm/s * Bottom Layer", "Speed: 80mm/s * Bottom Layer Speed: 20mm/s * Infill Speed: 50mm/s * Outer", "online of a 150mm/s printing speed. Are there better settings to use, especially", "The manual shows [Cura] examples of: * Print speed: 50mm/s * Travel Speed:", "ones which can speed up printing time? Or are there any other measures", "to use, especially ones which can speed up printing time? Or are there", "are there any other measures which I can take in order to reduce", "other measures which I can take in order to reduce printing time in" ]
[ "properly? Is it a problem with machine or the design? I am using", "upper part of the solid properly which contain a hole (as in the", "well. [![enter image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should I change to print the part", "a hole (as in the picture). The solid part (bottom section) printed well.", "hole (as in the picture). The solid part (bottom section) printed well. [![enter", "description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should I change to print the part with hole properly?", "it a problem with machine or the design? I am using Hydra 3D", "I cannot generate the upper part of the solid properly which contain a", "of the solid properly which contain a hole (as in the picture). The", "change to print the part with hole properly? Is it a problem with", "What should I change to print the part with hole properly? Is it", "generate the upper part of the solid properly which contain a hole (as", "The solid part (bottom section) printed well. [![enter image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should", "solid part (bottom section) printed well. [![enter image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should I", "to print the part with hole properly? Is it a problem with machine", "(bottom section) printed well. [![enter image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should I change to", "print the part with hole properly? Is it a problem with machine or", "I change to print the part with hole properly? Is it a problem", "part with hole properly? Is it a problem with machine or the design?", "section) printed well. [![enter image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should I change to print", "contain a hole (as in the picture). The solid part (bottom section) printed", "should I change to print the part with hole properly? Is it a", "[![enter image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should I change to print the part with", "cannot generate the upper part of the solid properly which contain a hole", "image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should I change to print the part with hole", "which contain a hole (as in the picture). The solid part (bottom section)", "properly which contain a hole (as in the picture). The solid part (bottom", "the picture). The solid part (bottom section) printed well. [![enter image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg)", "a problem with machine or the design? I am using Hydra 3D printer.", "part (bottom section) printed well. [![enter image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should I change", "hole properly? Is it a problem with machine or the design? I am", "Is it a problem with machine or the design? I am using Hydra", "printed well. [![enter image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should I change to print the", "the solid properly which contain a hole (as in the picture). The solid", "part of the solid properly which contain a hole (as in the picture).", "solid properly which contain a hole (as in the picture). The solid part", "(as in the picture). The solid part (bottom section) printed well. [![enter image", "here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What should I change to print the part with hole properly? Is", "the part with hole properly? Is it a problem with machine or the", "with hole properly? Is it a problem with machine or the design? I", "the upper part of the solid properly which contain a hole (as in", "picture). The solid part (bottom section) printed well. [![enter image description here](https://i.stack.imgur.com/QpBfRm.jpg)](https://i.stack.imgur.com/QpBfR.jpg) What", "in the picture). The solid part (bottom section) printed well. [![enter image description" ]
[ "drive. 38 teeth in extruder drive gear. I bought it from [this website](https://www.robotics.org.za/RDKIT-00?search=extru).", "80,80, 4000, 180 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 3, 45 } #define", "[this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are my current settings: ``` #define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80, 4000,", "Ramps 1.4 and would like to get answer on extrusion in Marlin firmware.", "settings: ``` #define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80, 4000, 180 } #define DEFAULT_MAX_FEEDRATE { 500,", "drive gear. I bought it from [this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are my current settings:", "direct drive. 38 teeth in extruder drive gear. I bought it from [this", "stepper motor 1.8 deg, set to 1/16 step. Mk7 direct drive. 38 teeth", "500, 3, 45 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 300 } ```", "DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 300 } ``` I am using ABS 1.75", "I have Ramps 1.4 and would like to get answer on extrusion in", "step. Mk7 direct drive. 38 teeth in extruder drive gear. I bought it", "gear. I bought it from [this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are my current settings: ```", "bought it from [this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are my current settings: ``` #define DEFAULT_AXIS_STEPS_PER_UNIT", "teeth in extruder drive gear. I bought it from [this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are", "website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are my current settings: ``` #define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80, 4000, 180", "and would like to get answer on extrusion in Marlin firmware. I have", "from [this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are my current settings: ``` #define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80,", "my current settings: ``` #define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80, 4000, 180 } #define DEFAULT_MAX_FEEDRATE", "{ 80,80, 4000, 180 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 3, 45 }", "extruder drive gear. I bought it from [this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are my current", "100, 300 } ``` I am using ABS 1.75 filament and a 0.4", "``` #define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80, 4000, 180 } #define DEFAULT_MAX_FEEDRATE { 500, 500,", "Mk7 direct drive. 38 teeth in extruder drive gear. I bought it from", "I have NEMA 17 stepper motor 1.8 deg, set to 1/16 step. Mk7", "DEFAULT_MAX_FEEDRATE { 500, 500, 3, 45 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100,", "get answer on extrusion in Marlin firmware. I have NEMA 17 stepper motor", "motor 1.8 deg, set to 1/16 step. Mk7 direct drive. 38 teeth in", "are my current settings: ``` #define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80, 4000, 180 } #define", "in Marlin firmware. I have NEMA 17 stepper motor 1.8 deg, set to", "to 1/16 step. Mk7 direct drive. 38 teeth in extruder drive gear. I", "#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 300 } ``` I am using ABS", "{ 9000, 9000, 100, 300 } ``` I am using ABS 1.75 filament", "firmware. I have NEMA 17 stepper motor 1.8 deg, set to 1/16 step.", "DEFAULT_AXIS_STEPS_PER_UNIT { 80,80, 4000, 180 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 3, 45", "in extruder drive gear. I bought it from [this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are my", "1.4 and would like to get answer on extrusion in Marlin firmware. I", "it from [this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are my current settings: ``` #define DEFAULT_AXIS_STEPS_PER_UNIT {", "180 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 3, 45 } #define DEFAULT_MAX_ACCELERATION {", "have Ramps 1.4 and would like to get answer on extrusion in Marlin", "45 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 300 } ``` I am", "500, 500, 3, 45 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 300 }", "} #define DEFAULT_MAX_FEEDRATE { 500, 500, 3, 45 } #define DEFAULT_MAX_ACCELERATION { 9000,", "} #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 300 } ``` I am using", "NEMA 17 stepper motor 1.8 deg, set to 1/16 step. Mk7 direct drive.", "9000, 9000, 100, 300 } ``` I am using ABS 1.75 filament and", "deg, set to 1/16 step. Mk7 direct drive. 38 teeth in extruder drive", "I bought it from [this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here are my current settings: ``` #define", "Here are my current settings: ``` #define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80, 4000, 180 }", "Marlin firmware. I have NEMA 17 stepper motor 1.8 deg, set to 1/16", "9000, 100, 300 } ``` I am using ABS 1.75 filament and a", "300 } ``` I am using ABS 1.75 filament and a 0.4 nozzle.", "#define DEFAULT_MAX_FEEDRATE { 500, 500, 3, 45 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000,", "set to 1/16 step. Mk7 direct drive. 38 teeth in extruder drive gear.", "3, 45 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 300 } ``` I", "1/16 step. Mk7 direct drive. 38 teeth in extruder drive gear. I bought", "to get answer on extrusion in Marlin firmware. I have NEMA 17 stepper", "17 stepper motor 1.8 deg, set to 1/16 step. Mk7 direct drive. 38", "{ 500, 500, 3, 45 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 300", "have NEMA 17 stepper motor 1.8 deg, set to 1/16 step. Mk7 direct", "answer on extrusion in Marlin firmware. I have NEMA 17 stepper motor 1.8", "like to get answer on extrusion in Marlin firmware. I have NEMA 17", "#define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80, 4000, 180 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 3,", "on extrusion in Marlin firmware. I have NEMA 17 stepper motor 1.8 deg,", "1.8 deg, set to 1/16 step. Mk7 direct drive. 38 teeth in extruder", "38 teeth in extruder drive gear. I bought it from [this website](https://www.robotics.org.za/RDKIT-00?search=extru). Here", "would like to get answer on extrusion in Marlin firmware. I have NEMA", "current settings: ``` #define DEFAULT_AXIS_STEPS_PER_UNIT { 80,80, 4000, 180 } #define DEFAULT_MAX_FEEDRATE {", "4000, 180 } #define DEFAULT_MAX_FEEDRATE { 500, 500, 3, 45 } #define DEFAULT_MAX_ACCELERATION", "extrusion in Marlin firmware. I have NEMA 17 stepper motor 1.8 deg, set" ]
[ "to look at it to make sure I'm not crazy. [![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg", "the \"extruder kit\" part that does not have enough space to attach on", "(a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is going fine except the \"extruder kit\" part that", "time building a 3D printer (a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is going fine except", "to the frame? I just want another set of eyes to look at", "\"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder - image#2\")](https://i.stack.imgur.com/VCDP6.jpg) [![Extruder - image#3](https://i.stack.imgur.com/1Z8C2m.jpg \"Extruder", "frame? I just want another set of eyes to look at it to", "a longer hole so it can be attached to the frame? I just", "at it to make sure I'm not crazy. [![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder -", "I'm not crazy. [![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder", "another set of eyes to look at it to make sure I'm not", "my first time building a 3D printer (a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is going", "eyes to look at it to make sure I'm not crazy. [![Extruder -", "can be attached to the frame? I just want another set of eyes", "longer hole so it can be attached to the frame? I just want", "make sure I'm not crazy. [![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder -", "fine except the \"extruder kit\" part that does not have enough space to", "a 3D printer (a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is going fine except the \"extruder", "3D printer (a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is going fine except the \"extruder kit\"", "image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder - image#2\")](https://i.stack.imgur.com/VCDP6.jpg) [![Extruder - image#3](https://i.stack.imgur.com/1Z8C2m.jpg \"Extruder - image#3\")](https://i.stack.imgur.com/1Z8C2.jpg)", "printer (a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is going fine except the \"extruder kit\" part", "attached to the frame? I just want another set of eyes to look", "crazy. [![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder - image#2\")](https://i.stack.imgur.com/VCDP6.jpg)", "does not have enough space to attach on the frame. Should I drill", "enough space to attach on the frame. Should I drill it to have", "This is my first time building a 3D printer (a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything", "the frame. Should I drill it to have a longer hole so it", "drill it to have a longer hole so it can be attached to", "going fine except the \"extruder kit\" part that does not have enough space", "- image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder - image#2\")](https://i.stack.imgur.com/VCDP6.jpg) [![Extruder -", "part that does not have enough space to attach on the frame. Should", "kit\" part that does not have enough space to attach on the frame.", "to make sure I'm not crazy. [![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder", "\"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is going fine except the \"extruder kit\" part that does", "have a longer hole so it can be attached to the frame? I", "it to make sure I'm not crazy. [![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg)", "[![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder - image#2\")](https://i.stack.imgur.com/VCDP6.jpg) [![Extruder", "be attached to the frame? I just want another set of eyes to", "of eyes to look at it to make sure I'm not crazy. [![Extruder", "so it can be attached to the frame? I just want another set", "Should I drill it to have a longer hole so it can be", "set of eyes to look at it to make sure I'm not crazy.", "not have enough space to attach on the frame. Should I drill it", "is going fine except the \"extruder kit\" part that does not have enough", "building a 3D printer (a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is going fine except the", "- image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder - image#2\")](https://i.stack.imgur.com/VCDP6.jpg) [![Extruder - image#3](https://i.stack.imgur.com/1Z8C2m.jpg \"Extruder -", "just want another set of eyes to look at it to make sure", "I just want another set of eyes to look at it to make", "look at it to make sure I'm not crazy. [![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder", "\"extruder kit\" part that does not have enough space to attach on the", "on the frame. Should I drill it to have a longer hole so", "not crazy. [![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder -", "space to attach on the frame. Should I drill it to have a", "to attach on the frame. Should I drill it to have a longer", "Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is going fine except the \"extruder kit\" part that does not", "except the \"extruder kit\" part that does not have enough space to attach", "hole so it can be attached to the frame? I just want another", "it can be attached to the frame? I just want another set of", "I drill it to have a longer hole so it can be attached", "is my first time building a 3D printer (a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is", "image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg \"Extruder - image#2\")](https://i.stack.imgur.com/VCDP6.jpg) [![Extruder - image#3](https://i.stack.imgur.com/1Z8C2m.jpg", "first time building a 3D printer (a \"[Creality Ender-4](https://www.3dprintersonlinestore.com/creality-ender4-3d-printer)\"). Everything is going fine", "Everything is going fine except the \"extruder kit\" part that does not have", "have enough space to attach on the frame. Should I drill it to", "attach on the frame. Should I drill it to have a longer hole", "to have a longer hole so it can be attached to the frame?", "it to have a longer hole so it can be attached to the", "that does not have enough space to attach on the frame. Should I", "frame. Should I drill it to have a longer hole so it can", "want another set of eyes to look at it to make sure I'm", "the frame? I just want another set of eyes to look at it", "sure I'm not crazy. [![Extruder - image#1](https://i.stack.imgur.com/kw3khm.jpg \"Extruder - image#1\")](https://i.stack.imgur.com/kw3kh.jpg) [![Extruder - image#2](https://i.stack.imgur.com/VCDP6m.jpg" ]
[ "comes from the LCD). If I search for \"Daylight resin\" on Google, the", "from the LCD). If I search for \"Daylight resin\" on Google, the only", "good too; however, I'm trying to search for alternatives. I'm not interested in", "I'm not interested in something cheaper, I'd like to choose a resin which", "when white light comes from the LCD). If I search for \"Daylight resin\"", "a resin which has more colors. Photocentric's hard resin only comes in cream/green/gray", "like to choose a resin which has more colors. Photocentric's hard resin only", "would need at least white/black/transparent resin. Is it the only option we have?", "planning to make an LCD Resin printer. I'm still learning and I found", "seem to be good too; however, I'm trying to search for alternatives. I'm", "cream/green/gray colors. I would need at least white/black/transparent resin. Is it the only", "[Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells Daylight resins and the prices seem to be", "resin (which hardens when white light comes from the LCD). If I search", "\"Daylight resin\" on Google, the only \"useful\" result I find is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0).", "colors. I would need at least white/black/transparent resin. Is it the only option", "I'm still learning and I found out that I need daylight resin (which", "need daylight resin (which hardens when white light comes from the LCD). If", "LCD). If I search for \"Daylight resin\" on Google, the only \"useful\" result", "the only option we have? Are there any other manufacturer out there which", "(which hardens when white light comes from the LCD). If I search for", "Photocentric sells Daylight resins and the prices seem to be good too; however,", "prices seem to be good too; however, I'm trying to search for alternatives.", "resin which has more colors. Photocentric's hard resin only comes in cream/green/gray colors.", "to choose a resin which has more colors. Photocentric's hard resin only comes", "white/black/transparent resin. Is it the only option we have? Are there any other", "Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells Daylight resins and the prices seem to be good too;", "I found out that I need daylight resin (which hardens when white light", "daylight resin (which hardens when white light comes from the LCD). If I", "the LCD). If I search for \"Daylight resin\" on Google, the only \"useful\"", "too; however, I'm trying to search for alternatives. I'm not interested in something", "I need daylight resin (which hardens when white light comes from the LCD).", "on Google, the only \"useful\" result I find is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg)", "Google, the only \"useful\" result I find is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric", "LCD Resin printer. I'm still learning and I found out that I need", "option we have? Are there any other manufacturer out there which produces Daylight", "however, I'm trying to search for alternatives. I'm not interested in something cheaper,", "If I search for \"Daylight resin\" on Google, the only \"useful\" result I", "I'd like to choose a resin which has more colors. Photocentric's hard resin", "in something cheaper, I'd like to choose a resin which has more colors.", "for \"Daylight resin\" on Google, the only \"useful\" result I find is for", "I'm trying to search for alternatives. I'm not interested in something cheaper, I'd", "make an LCD Resin printer. I'm still learning and I found out that", "we have? Are there any other manufacturer out there which produces Daylight resin/LCD-hardening", "for alternatives. I'm not interested in something cheaper, I'd like to choose a", "the prices seem to be good too; however, I'm trying to search for", "printer. I'm still learning and I found out that I need daylight resin", "only comes in cream/green/gray colors. I would need at least white/black/transparent resin. Is", "which has more colors. Photocentric's hard resin only comes in cream/green/gray colors. I", "Photocentric's hard resin only comes in cream/green/gray colors. I would need at least", "and the prices seem to be good too; however, I'm trying to search", "Is it the only option we have? Are there any other manufacturer out", "the only \"useful\" result I find is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells", "search for alternatives. I'm not interested in something cheaper, I'd like to choose", "alternatives. I'm not interested in something cheaper, I'd like to choose a resin", "to be good too; however, I'm trying to search for alternatives. I'm not", "\"useful\" result I find is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells Daylight resins", "interested in something cheaper, I'd like to choose a resin which has more", "an LCD Resin printer. I'm still learning and I found out that I", "there any other manufacturer out there which produces Daylight resin/LCD-hardening resin with a", "cheaper, I'd like to choose a resin which has more colors. Photocentric's hard", "search for \"Daylight resin\" on Google, the only \"useful\" result I find is", "still learning and I found out that I need daylight resin (which hardens", "light comes from the LCD). If I search for \"Daylight resin\" on Google,", "not interested in something cheaper, I'd like to choose a resin which has", "only option we have? Are there any other manufacturer out there which produces", "[![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells Daylight resins and the prices seem to be good", "something cheaper, I'd like to choose a resin which has more colors. Photocentric's", "to search for alternatives. I'm not interested in something cheaper, I'd like to", "Resin printer. I'm still learning and I found out that I need daylight", "result I find is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells Daylight resins and", "trying to search for alternatives. I'm not interested in something cheaper, I'd like", "hard resin only comes in cream/green/gray colors. I would need at least white/black/transparent", "at least white/black/transparent resin. Is it the only option we have? Are there", "I search for \"Daylight resin\" on Google, the only \"useful\" result I find", "resin. Is it the only option we have? Are there any other manufacturer", "manufacturer out there which produces Daylight resin/LCD-hardening resin with a variety of colors?", "sells Daylight resins and the prices seem to be good too; however, I'm", "found out that I need daylight resin (which hardens when white light comes", "learning and I found out that I need daylight resin (which hardens when", "and I found out that I need daylight resin (which hardens when white", "out that I need daylight resin (which hardens when white light comes from", "is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells Daylight resins and the prices seem", "be good too; however, I'm trying to search for alternatives. I'm not interested", "least white/black/transparent resin. Is it the only option we have? Are there any", "that I need daylight resin (which hardens when white light comes from the", "have? Are there any other manufacturer out there which produces Daylight resin/LCD-hardening resin", "I find is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells Daylight resins and the", "other manufacturer out there which produces Daylight resin/LCD-hardening resin with a variety of", "choose a resin which has more colors. Photocentric's hard resin only comes in", "resins and the prices seem to be good too; however, I'm trying to", "more colors. Photocentric's hard resin only comes in cream/green/gray colors. I would need", "resin only comes in cream/green/gray colors. I would need at least white/black/transparent resin.", "Daylight resins and the prices seem to be good too; however, I'm trying", "in cream/green/gray colors. I would need at least white/black/transparent resin. Is it the", "colors. Photocentric's hard resin only comes in cream/green/gray colors. I would need at", "to make an LCD Resin printer. I'm still learning and I found out", "I'm planning to make an LCD Resin printer. I'm still learning and I", "I would need at least white/black/transparent resin. Is it the only option we", "for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells Daylight resins and the prices seem to", "resin\" on Google, the only \"useful\" result I find is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric", "need at least white/black/transparent resin. Is it the only option we have? Are", "find is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells Daylight resins and the prices", "has more colors. Photocentric's hard resin only comes in cream/green/gray colors. I would", "any other manufacturer out there which produces Daylight resin/LCD-hardening resin with a variety", "white light comes from the LCD). If I search for \"Daylight resin\" on", "it the only option we have? Are there any other manufacturer out there", "Are there any other manufacturer out there which produces Daylight resin/LCD-hardening resin with", "comes in cream/green/gray colors. I would need at least white/black/transparent resin. Is it", "hardens when white light comes from the LCD). If I search for \"Daylight", "only \"useful\" result I find is for [Photocentric](https://photocentric3d.com/daylightresins/?v=9b6a28c805e0). [![Photocentric Resin](https://i.stack.imgur.com/WWTR9m.jpg)](https://i.stack.imgur.com/WWTR9m.jpg) Photocentric sells Daylight" ]
[ "head is at the correct temperatures, is the extremely runny filament I saw", "fluid as I could easily cause a large spurt of molten plastic by", "large spurt of molten plastic by manually pushing the filament with very little", "have experience of why it can seem to be printing but then slowly", "experience of why it can seem to be printing but then slowly start", "it The stepper did not appear to slip back just the gear skipped", "print with a few of the lines being missing before it started extruding", "as the feeder slipped off it The stepper did not appear to slip", "as I could easily cause a large spurt of molten plastic by manually", "- which I've setup and performed a few prints on and they have", "which I've setup and performed a few prints on and they have various", "that normal or at least have people seen it looking like that when", "- I noticed on a longer print that the feeding was sometimes failing", "the filament jerking back as the feeder slipped off it The stepper did", "print Does anyone have experience of why it can seem to be printing", "little effort. So I reduced the head temperature to 195 and all seemed", "time - I noticed on a longer print that the feeding was sometimes", "noticed on a longer print that the feeding was sometimes failing with the", "if my decription triggers someone I've been adjusting settings - In particular the", "sometimes failing with the filament jerking back as the feeder slipped off it", "the temperature - as the filament seemed too fluid as I could easily", "appear to slip back just the gear skipped on the filament It appeared", "I've been adjusting settings - In particular the temperature - as the filament", "back just the gear skipped on the filament It appeared to cause a", "print that the feeding was sometimes failing with the filament jerking back as", "I reduced the temperature, I doubled the skirt and that seem to make", "seen it looking like that when successfully printing? Initially , before I reduced", "and eventually stopping completely The head is flooded and I need to clean", "195 and all seemed better However after a time - I noticed on", "final part of the succesful print consisting of very thin hair like extrusions", "failing with the filament jerking back as the feeder slipped off it The", "the filament with very little effort. So I reduced the head temperature to", "issue continued intermittently however I left it and when I returned the head", "need to clean it out So my questions are - how runny should", "like or if my decription triggers someone I've been adjusting settings - In", "back as the feeder slipped off it The stepper did not appear to", "back to 200 - however the issue continued intermittently however I left it", "I left it and when I returned the head had become blocked with", "of molten plastic by manually pushing the filament with very little effort. So", "when I returned the head had become blocked with the final part of", "out So my questions are - how runny should the filament look when", "200 - however the issue continued intermittently however I left it and when", "I reduced the head temperature to 195 and all seemed better However after", "extrusions and eventually stopping completely The head is flooded and I need to", "missing before it started extruding normally again I increased the temperature back to", "So I reduced the head temperature to 195 and all seemed better However", "on what the flow of filament should look like or if my decription", "temperature to 195 and all seemed better However after a time - I", "the extremely runny filament I saw at 200 obviously too hot - or", "like that when successfully printing? Initially , before I reduced the temperature, I", "jerking back as the feeder slipped off it The stepper did not appear", "when successfully printing? Initially , before I reduced the temperature, I doubled the", "longer print that the feeding was sometimes failing with the filament jerking back", "had become blocked with the final part of the succesful print consisting of", "with the final part of the succesful print consisting of very thin hair", "very little effort. So I reduced the head temperature to 195 and all", "questions are - how runny should the filament look when the head is", "on a longer print that the feeding was sometimes failing with the filament", "obviously too hot - or is that normal or at least have people", "the feeding was sometimes failing with the filament jerking back as the feeder", "extruding normally again I increased the temperature back to 200 - however the", "or if my decription triggers someone I've been adjusting settings - In particular", "is flooded and I need to clean it out So my questions are", "- how runny should the filament look when the head is at the", "triggers someone I've been adjusting settings - In particular the temperature - as", "to slip back just the gear skipped on the filament It appeared to", "manually pushing the filament with very little effort. So I reduced the head", "in the print with a few of the lines being missing before it", "correct temperatures, is the extremely runny filament I saw at 200 obviously too", "started extruding normally again I increased the temperature back to 200 - however", "I've setup and performed a few prints on and they have various problems", "I saw at 200 obviously too hot - or is that normal or", "should look like or if my decription triggers someone I've been adjusting settings", "plastic by manually pushing the filament with very little effort. So I reduced", "better However after a time - I noticed on a longer print that", "intermittently however I left it and when I returned the head had become", "enough print Does anyone have experience of why it can seem to be", "seemed better However after a time - I noticed on a longer print", "to make a good enough print Does anyone have experience of why it", "few prints on and they have various problems with the quality. I'm after", "However after a time - I noticed on a longer print that the", "The stepper did not appear to slip back just the gear skipped on", "it started extruding normally again I increased the temperature back to 200 -", "the succesful print consisting of very thin hair like extrusions and eventually stopping", "to clean it out So my questions are - how runny should the", "filament seemed too fluid as I could easily cause a large spurt of", "left it and when I returned the head had become blocked with the", "seem to be printing but then slowly start failing until the head becomes", "too hot - or is that normal or at least have people seen", "on the filament It appeared to cause a problem in the print with", "flooded and I need to clean it out So my questions are -", "filament jerking back as the feeder slipped off it The stepper did not", "my decription triggers someone I've been adjusting settings - In particular the temperature", "Initially , before I reduced the temperature, I doubled the skirt and that", "of why it can seem to be printing but then slowly start failing", "returned the head had become blocked with the final part of the succesful", "the head is at the correct temperatures, is the extremely runny filament I", "extremely runny filament I saw at 200 obviously too hot - or is", "should the filament look when the head is at the correct temperatures, is", "successfully printing? Initially , before I reduced the temperature, I doubled the skirt", "hot - or is that normal or at least have people seen it", "reduced the temperature, I doubled the skirt and that seem to make a", "appeared to cause a problem in the print with a few of the", "a good enough print Does anyone have experience of why it can seem", "cause a problem in the print with a few of the lines being", "that when successfully printing? Initially , before I reduced the temperature, I doubled", "- as the filament seemed too fluid as I could easily cause a", "before it started extruding normally again I increased the temperature back to 200", "have people seen it looking like that when successfully printing? Initially , before", "flow of filament should look like or if my decription triggers someone I've", "too fluid as I could easily cause a large spurt of molten plastic", "however the issue continued intermittently however I left it and when I returned", "I increased the temperature back to 200 - however the issue continued intermittently", "continued intermittently however I left it and when I returned the head had", ", before I reduced the temperature, I doubled the skirt and that seem", "before I reduced the temperature, I doubled the skirt and that seem to", "slip back just the gear skipped on the filament It appeared to cause", "succesful print consisting of very thin hair like extrusions and eventually stopping completely", "Prusa - which I've setup and performed a few prints on and they", "lines being missing before it started extruding normally again I increased the temperature", "- or is that normal or at least have people seen it looking", "I doubled the skirt and that seem to make a good enough print", "good enough print Does anyone have experience of why it can seem to", "at least have people seen it looking like that when successfully printing? Initially", "spurt of molten plastic by manually pushing the filament with very little effort.", "200 obviously too hot - or is that normal or at least have", "and that seem to make a good enough print Does anyone have experience", "particular the temperature - as the filament seemed too fluid as I could", "molten plastic by manually pushing the filament with very little effort. So I", "of the lines being missing before it started extruding normally again I increased", "when the head is at the correct temperatures, is the extremely runny filament", "is at the correct temperatures, is the extremely runny filament I saw at", "pushing the filament with very little effort. So I reduced the head temperature", "with the quality. I'm after some specific experience on what the flow of", "again I increased the temperature back to 200 - however the issue continued", "filament with very little effort. So I reduced the head temperature to 195", "people seen it looking like that when successfully printing? Initially , before I", "the lines being missing before it started extruding normally again I increased the", "consisting of very thin hair like extrusions and eventually stopping completely The head", "feeder slipped off it The stepper did not appear to slip back just", "the feeder slipped off it The stepper did not appear to slip back", "not appear to slip back just the gear skipped on the filament It", "and they have various problems with the quality. I'm after some specific experience", "clean it out So my questions are - how runny should the filament", "performed a few prints on and they have various problems with the quality.", "filament should look like or if my decription triggers someone I've been adjusting", "with the filament jerking back as the feeder slipped off it The stepper", "thin hair like extrusions and eventually stopping completely The head is flooded and", "I need to clean it out So my questions are - how runny", "with very little effort. So I reduced the head temperature to 195 and", "are - how runny should the filament look when the head is at", "after a time - I noticed on a longer print that the feeding", "and all seemed better However after a time - I noticed on a", "off it The stepper did not appear to slip back just the gear", "the filament It appeared to cause a problem in the print with a", "part of the succesful print consisting of very thin hair like extrusions and", "normal or at least have people seen it looking like that when successfully", "skirt and that seem to make a good enough print Does anyone have", "look when the head is at the correct temperatures, is the extremely runny", "look like or if my decription triggers someone I've been adjusting settings -", "a large spurt of molten plastic by manually pushing the filament with very", "feeding was sometimes failing with the filament jerking back as the feeder slipped", "and performed a few prints on and they have various problems with the", "my questions are - how runny should the filament look when the head", "someone I've been adjusting settings - In particular the temperature - as the", "the head had become blocked with the final part of the succesful print", "they have various problems with the quality. I'm after some specific experience on", "the gear skipped on the filament It appeared to cause a problem in", "the quality. I'm after some specific experience on what the flow of filament", "a time - I noticed on a longer print that the feeding was", "and I need to clean it out So my questions are - how", "completely The head is flooded and I need to clean it out So", "could easily cause a large spurt of molten plastic by manually pushing the", "skipped on the filament It appeared to cause a problem in the print", "seemed too fluid as I could easily cause a large spurt of molten", "at the correct temperatures, is the extremely runny filament I saw at 200", "to cause a problem in the print with a few of the lines", "or at least have people seen it looking like that when successfully printing?", "of very thin hair like extrusions and eventually stopping completely The head is", "temperature, I doubled the skirt and that seem to make a good enough", "I have an ANET A2 Prusa - which I've setup and performed a", "being missing before it started extruding normally again I increased the temperature back", "filament look when the head is at the correct temperatures, is the extremely", "seem to make a good enough print Does anyone have experience of why", "A2 Prusa - which I've setup and performed a few prints on and", "gear skipped on the filament It appeared to cause a problem in the", "of the succesful print consisting of very thin hair like extrusions and eventually", "of filament should look like or if my decription triggers someone I've been", "runny should the filament look when the head is at the correct temperatures,", "after some specific experience on what the flow of filament should look like", "Does anyone have experience of why it can seem to be printing but", "I noticed on a longer print that the feeding was sometimes failing with", "increased the temperature back to 200 - however the issue continued intermittently however", "- In particular the temperature - as the filament seemed too fluid as", "it out So my questions are - how runny should the filament look", "just the gear skipped on the filament It appeared to cause a problem", "what the flow of filament should look like or if my decription triggers", "the filament look when the head is at the correct temperatures, is the", "various problems with the quality. I'm after some specific experience on what the", "temperature - as the filament seemed too fluid as I could easily cause", "few of the lines being missing before it started extruding normally again I", "it looking like that when successfully printing? Initially , before I reduced the", "the skirt and that seem to make a good enough print Does anyone", "very thin hair like extrusions and eventually stopping completely The head is flooded", "an ANET A2 Prusa - which I've setup and performed a few prints", "the flow of filament should look like or if my decription triggers someone", "the head temperature to 195 and all seemed better However after a time", "I'm after some specific experience on what the flow of filament should look", "cause a large spurt of molten plastic by manually pushing the filament with", "effort. So I reduced the head temperature to 195 and all seemed better", "print consisting of very thin hair like extrusions and eventually stopping completely The", "experience on what the flow of filament should look like or if my", "temperature back to 200 - however the issue continued intermittently however I left", "runny filament I saw at 200 obviously too hot - or is that", "looking like that when successfully printing? Initially , before I reduced the temperature,", "can seem to be printing but then slowly start failing until the head", "filament It appeared to cause a problem in the print with a few", "The head is flooded and I need to clean it out So my", "to be printing but then slowly start failing until the head becomes blocked?", "the temperature back to 200 - however the issue continued intermittently however I", "prints on and they have various problems with the quality. I'm after some", "decription triggers someone I've been adjusting settings - In particular the temperature -", "head temperature to 195 and all seemed better However after a time -", "It appeared to cause a problem in the print with a few of", "blocked with the final part of the succesful print consisting of very thin", "it can seem to be printing but then slowly start failing until the", "temperatures, is the extremely runny filament I saw at 200 obviously too hot", "that seem to make a good enough print Does anyone have experience of", "like extrusions and eventually stopping completely The head is flooded and I need", "to 200 - however the issue continued intermittently however I left it and", "have an ANET A2 Prusa - which I've setup and performed a few", "- however the issue continued intermittently however I left it and when I", "stopping completely The head is flooded and I need to clean it out", "So my questions are - how runny should the filament look when the", "head is flooded and I need to clean it out So my questions", "a few of the lines being missing before it started extruding normally again", "anyone have experience of why it can seem to be printing but then", "a few prints on and they have various problems with the quality. I'm", "specific experience on what the flow of filament should look like or if", "been adjusting settings - In particular the temperature - as the filament seemed", "slipped off it The stepper did not appear to slip back just the", "did not appear to slip back just the gear skipped on the filament", "adjusting settings - In particular the temperature - as the filament seemed too", "a problem in the print with a few of the lines being missing", "head had become blocked with the final part of the succesful print consisting", "eventually stopping completely The head is flooded and I need to clean it", "at 200 obviously too hot - or is that normal or at least", "hair like extrusions and eventually stopping completely The head is flooded and I", "In particular the temperature - as the filament seemed too fluid as I", "on and they have various problems with the quality. I'm after some specific", "was sometimes failing with the filament jerking back as the feeder slipped off", "with a few of the lines being missing before it started extruding normally", "normally again I increased the temperature back to 200 - however the issue", "is that normal or at least have people seen it looking like that", "all seemed better However after a time - I noticed on a longer", "settings - In particular the temperature - as the filament seemed too fluid", "the filament seemed too fluid as I could easily cause a large spurt", "as the filament seemed too fluid as I could easily cause a large", "easily cause a large spurt of molten plastic by manually pushing the filament", "a longer print that the feeding was sometimes failing with the filament jerking", "however I left it and when I returned the head had become blocked", "is the extremely runny filament I saw at 200 obviously too hot -", "or is that normal or at least have people seen it looking like", "make a good enough print Does anyone have experience of why it can", "saw at 200 obviously too hot - or is that normal or at", "I could easily cause a large spurt of molten plastic by manually pushing", "some specific experience on what the flow of filament should look like or", "that the feeding was sometimes failing with the filament jerking back as the", "how runny should the filament look when the head is at the correct", "have various problems with the quality. I'm after some specific experience on what", "reduced the head temperature to 195 and all seemed better However after a", "it and when I returned the head had become blocked with the final", "stepper did not appear to slip back just the gear skipped on the", "and when I returned the head had become blocked with the final part", "the correct temperatures, is the extremely runny filament I saw at 200 obviously", "the print with a few of the lines being missing before it started", "doubled the skirt and that seem to make a good enough print Does", "problem in the print with a few of the lines being missing before", "why it can seem to be printing but then slowly start failing until", "problems with the quality. I'm after some specific experience on what the flow", "the final part of the succesful print consisting of very thin hair like", "filament I saw at 200 obviously too hot - or is that normal", "by manually pushing the filament with very little effort. So I reduced the", "setup and performed a few prints on and they have various problems with", "quality. I'm after some specific experience on what the flow of filament should", "least have people seen it looking like that when successfully printing? Initially ,", "the issue continued intermittently however I left it and when I returned the", "I returned the head had become blocked with the final part of the", "ANET A2 Prusa - which I've setup and performed a few prints on", "the temperature, I doubled the skirt and that seem to make a good", "printing? Initially , before I reduced the temperature, I doubled the skirt and", "to 195 and all seemed better However after a time - I noticed", "become blocked with the final part of the succesful print consisting of very" ]
[ "using a paving block but I'm not sure how effective that would be", "I have the printer in my downstairs study and if I'm doing a", "Thingiverse but apparently these can result quite significant vibrations of the printer itself,", "but apparently these can result quite significant vibrations of the printer itself, which", "the print. I've also seen one guy using a paving block but I'm", "are noise reduction feet available on Thingiverse but apparently these can result quite", "I'm not sure how effective that would be and also don't think my", "concrete block put on it. I was wondering about trying an off-cut of", "noise reduction feet available on Thingiverse but apparently these can result quite significant", "feet available on Thingiverse but apparently these can result quite significant vibrations of", "mess up the print. I've also seen one guy using a paving block", "think my cheap Ikea desk would cope very well with having a concrete", "and also don't think my cheap Ikea desk would cope very well with", "a paving block but I'm not sure how effective that would be and", "block put on it. I was wondering about trying an off-cut of carpet.", "amount of noise produced by my CR-10. I have the printer in my", "that would be and also don't think my cheap Ikea desk would cope", "it. I was wondering about trying an off-cut of carpet. Has anyone tried", "up the print. I've also seen one guy using a paving block but", "of the printer itself, which could mess up the print. I've also seen", "I'm doing a long print job, you can hear it upstairs in my", "would be and also don't think my cheap Ikea desk would cope very", "but I'm not sure how effective that would be and also don't think", "my son's bedroom and I don't want it keep him awake. I've seen", "seen one guy using a paving block but I'm not sure how effective", "my cheap Ikea desk would cope very well with having a concrete block", "was wondering about trying an off-cut of carpet. Has anyone tried this or", "hear it upstairs in my son's bedroom and I don't want it keep", "itself, which could mess up the print. I've also seen one guy using", "would cope very well with having a concrete block put on it. I", "him awake. I've seen there are noise reduction feet available on Thingiverse but", "awake. I've seen there are noise reduction feet available on Thingiverse but apparently", "which could mess up the print. I've also seen one guy using a", "you can hear it upstairs in my son's bedroom and I don't want", "job, you can hear it upstairs in my son's bedroom and I don't", "with having a concrete block put on it. I was wondering about trying", "have the printer in my downstairs study and if I'm doing a long", "and I don't want it keep him awake. I've seen there are noise", "my downstairs study and if I'm doing a long print job, you can", "in my son's bedroom and I don't want it keep him awake. I've", "I've also seen one guy using a paving block but I'm not sure", "and if I'm doing a long print job, you can hear it upstairs", "my CR-10. I have the printer in my downstairs study and if I'm", "significant vibrations of the printer itself, which could mess up the print. I've", "in my downstairs study and if I'm doing a long print job, you", "there are noise reduction feet available on Thingiverse but apparently these can result", "having a concrete block put on it. I was wondering about trying an", "downstairs study and if I'm doing a long print job, you can hear", "effective that would be and also don't think my cheap Ikea desk would", "guy using a paving block but I'm not sure how effective that would", "it upstairs in my son's bedroom and I don't want it keep him", "study and if I'm doing a long print job, you can hear it", "if I'm doing a long print job, you can hear it upstairs in", "produced by my CR-10. I have the printer in my downstairs study and", "a long print job, you can hear it upstairs in my son's bedroom", "long print job, you can hear it upstairs in my son's bedroom and", "put on it. I was wondering about trying an off-cut of carpet. Has", "want it keep him awake. I've seen there are noise reduction feet available", "the amount of noise produced by my CR-10. I have the printer in", "result quite significant vibrations of the printer itself, which could mess up the", "wondering about trying an off-cut of carpet. Has anyone tried this or have", "by my CR-10. I have the printer in my downstairs study and if", "bedroom and I don't want it keep him awake. I've seen there are", "these can result quite significant vibrations of the printer itself, which could mess", "print. I've also seen one guy using a paving block but I'm not", "son's bedroom and I don't want it keep him awake. I've seen there", "cheap Ikea desk would cope very well with having a concrete block put", "block but I'm not sure how effective that would be and also don't", "printer itself, which could mess up the print. I've also seen one guy", "the printer in my downstairs study and if I'm doing a long print", "on it. I was wondering about trying an off-cut of carpet. Has anyone", "print job, you can hear it upstairs in my son's bedroom and I", "don't think my cheap Ikea desk would cope very well with having a", "available on Thingiverse but apparently these can result quite significant vibrations of the", "trying an off-cut of carpet. Has anyone tried this or have any other", "for methods to reduce the amount of noise produced by my CR-10. I", "vibrations of the printer itself, which could mess up the print. I've also", "printer in my downstairs study and if I'm doing a long print job,", "be and also don't think my cheap Ikea desk would cope very well", "I don't want it keep him awake. I've seen there are noise reduction", "can result quite significant vibrations of the printer itself, which could mess up", "to reduce the amount of noise produced by my CR-10. I have the", "CR-10. I have the printer in my downstairs study and if I'm doing", "one guy using a paving block but I'm not sure how effective that", "also don't think my cheap Ikea desk would cope very well with having", "upstairs in my son's bedroom and I don't want it keep him awake.", "it keep him awake. I've seen there are noise reduction feet available on", "cope very well with having a concrete block put on it. I was", "the printer itself, which could mess up the print. I've also seen one", "about trying an off-cut of carpet. Has anyone tried this or have any", "an off-cut of carpet. Has anyone tried this or have any other suggestions?", "reduction feet available on Thingiverse but apparently these can result quite significant vibrations", "not sure how effective that would be and also don't think my cheap", "methods to reduce the amount of noise produced by my CR-10. I have", "could mess up the print. I've also seen one guy using a paving", "I've seen there are noise reduction feet available on Thingiverse but apparently these", "on Thingiverse but apparently these can result quite significant vibrations of the printer", "keep him awake. I've seen there are noise reduction feet available on Thingiverse", "of noise produced by my CR-10. I have the printer in my downstairs", "can hear it upstairs in my son's bedroom and I don't want it", "noise produced by my CR-10. I have the printer in my downstairs study", "sure how effective that would be and also don't think my cheap Ikea", "I was wondering about trying an off-cut of carpet. Has anyone tried this", "seen there are noise reduction feet available on Thingiverse but apparently these can", "quite significant vibrations of the printer itself, which could mess up the print.", "apparently these can result quite significant vibrations of the printer itself, which could", "well with having a concrete block put on it. I was wondering about", "looking for methods to reduce the amount of noise produced by my CR-10.", "am looking for methods to reduce the amount of noise produced by my", "paving block but I'm not sure how effective that would be and also", "how effective that would be and also don't think my cheap Ikea desk", "don't want it keep him awake. I've seen there are noise reduction feet", "I am looking for methods to reduce the amount of noise produced by", "Ikea desk would cope very well with having a concrete block put on", "doing a long print job, you can hear it upstairs in my son's", "very well with having a concrete block put on it. I was wondering", "a concrete block put on it. I was wondering about trying an off-cut", "also seen one guy using a paving block but I'm not sure how", "desk would cope very well with having a concrete block put on it.", "reduce the amount of noise produced by my CR-10. I have the printer" ]
[ "deadening. If you want a less exotic parallel, imagine the body of a", "with the qualities of the resin used for 3d printing. If I were", "very familiar with the qualities of the resin used for 3d printing. If", "![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not very familiar with the qualities of the resin used for", "gourd used as a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not very familiar with the qualities", "play a [berimbau](https://en.m.wikipedia.org/wiki/Berimbau) for Capoeira. One of the most fragile (and most expensive)", "cabaça, a hollow gourd used as a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not very familiar", "how likely is it that it would work? My fear is that the", "I play a [berimbau](https://en.m.wikipedia.org/wiki/Berimbau) for Capoeira. One of the most fragile (and most", "One of the most fragile (and most expensive) bits is the cabaça, a", "is it that it would work? My fear is that the plastic would", "fear is that the plastic would be too sound deadening. If you want", "plastic would be too sound deadening. If you want a less exotic parallel,", "most fragile (and most expensive) bits is the cabaça, a hollow gourd used", "not very familiar with the qualities of the resin used for 3d printing.", "you want a less exotic parallel, imagine the body of a guitar. That's", "as a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not very familiar with the qualities of the", "our local Maker Lab and have them scan and print a copy, how", "this to our local Maker Lab and have them scan and print a", "be too sound deadening. If you want a less exotic parallel, imagine the", "work? My fear is that the plastic would be too sound deadening. If", "My fear is that the plastic would be too sound deadening. If you", "hollow gourd used as a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not very familiar with the", "it would work? My fear is that the plastic would be too sound", "to take this to our local Maker Lab and have them scan and", "a hollow gourd used as a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not very familiar with", "that the plastic would be too sound deadening. If you want a less", "bits is the cabaça, a hollow gourd used as a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm", "copy, how likely is it that it would work? My fear is that", "3d printing. If I were to take this to our local Maker Lab", "have them scan and print a copy, how likely is it that it", "a less exotic parallel, imagine the body of a guitar. That's a resonating", "less exotic parallel, imagine the body of a guitar. That's a resonating chamber.", "I were to take this to our local Maker Lab and have them", "of the resin used for 3d printing. If I were to take this", "them scan and print a copy, how likely is it that it would", "(and most expensive) bits is the cabaça, a hollow gourd used as a", "the resin used for 3d printing. If I were to take this to", "printing. If I were to take this to our local Maker Lab and", "resin used for 3d printing. If I were to take this to our", "a [berimbau](https://en.m.wikipedia.org/wiki/Berimbau) for Capoeira. One of the most fragile (and most expensive) bits", "I'm not very familiar with the qualities of the resin used for 3d", "that it would work? My fear is that the plastic would be too", "If you want a less exotic parallel, imagine the body of a guitar.", "the most fragile (and most expensive) bits is the cabaça, a hollow gourd", "for 3d printing. If I were to take this to our local Maker", "the qualities of the resin used for 3d printing. If I were to", "were to take this to our local Maker Lab and have them scan", "scan and print a copy, how likely is it that it would work?", "sound deadening. If you want a less exotic parallel, imagine the body of", "qualities of the resin used for 3d printing. If I were to take", "local Maker Lab and have them scan and print a copy, how likely", "a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not very familiar with the qualities of the resin", "resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not very familiar with the qualities of the resin used", "familiar with the qualities of the resin used for 3d printing. If I", "it that it would work? My fear is that the plastic would be", "too sound deadening. If you want a less exotic parallel, imagine the body", "used for 3d printing. If I were to take this to our local", "and have them scan and print a copy, how likely is it that", "used as a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not very familiar with the qualities of", "to our local Maker Lab and have them scan and print a copy,", "is the cabaça, a hollow gourd used as a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not", "would work? My fear is that the plastic would be too sound deadening.", "Maker Lab and have them scan and print a copy, how likely is", "and print a copy, how likely is it that it would work? My", "would be too sound deadening. If you want a less exotic parallel, imagine", "expensive) bits is the cabaça, a hollow gourd used as a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg)", "Lab and have them scan and print a copy, how likely is it", "likely is it that it would work? My fear is that the plastic", "take this to our local Maker Lab and have them scan and print", "the plastic would be too sound deadening. If you want a less exotic", "fragile (and most expensive) bits is the cabaça, a hollow gourd used as", "of the most fragile (and most expensive) bits is the cabaça, a hollow", "Capoeira. One of the most fragile (and most expensive) bits is the cabaça,", "print a copy, how likely is it that it would work? My fear", "a copy, how likely is it that it would work? My fear is", "If I were to take this to our local Maker Lab and have", "for Capoeira. One of the most fragile (and most expensive) bits is the", "most expensive) bits is the cabaça, a hollow gourd used as a resonator.", "the cabaça, a hollow gourd used as a resonator. ![cabaças](https://i.stack.imgur.com/tRNcL.jpg) I'm not very", "want a less exotic parallel, imagine the body of a guitar. That's a", "is that the plastic would be too sound deadening. If you want a", "[berimbau](https://en.m.wikipedia.org/wiki/Berimbau) for Capoeira. One of the most fragile (and most expensive) bits is" ]
[ "keep the existing bed and add and aluminum sheet on top. That leaves", "now I only plan on running PLA; but, I do plan on heating", "existing bed and add and aluminum sheet on top. That leaves 40mm on", "and back of the original bed. Right now I only plan on running", "I do plan on heating the bed. How thick does the aluminum sheet", "but, I do plan on heating the bed. How thick does the aluminum", "the bed from 220 mm x 220 mm to 220 mm x 300", "mm x 220 mm to 220 mm x 300 mm. For now, I", "sheet on top. That leaves 40mm on front and back of the original", "do plan on heating the bed. How thick does the aluminum sheet need", "only plan on running PLA; but, I do plan on heating the bed.", "and aluminum sheet on top. That leaves 40mm on front and back of", "X3 FDM RepRap printer. I am extending the bed from 220 mm x", "220 mm to 220 mm x 300 mm. For now, I will keep", "RepRap printer. I am extending the bed from 220 mm x 220 mm", "will keep the existing bed and add and aluminum sheet on top. That", "from 220 mm x 220 mm to 220 mm x 300 mm. For", "FDM RepRap printer. I am extending the bed from 220 mm x 220", "on top. That leaves 40mm on front and back of the original bed.", "That leaves 40mm on front and back of the original bed. Right now", "x 300 mm. For now, I will keep the existing bed and add", "220 mm x 220 mm to 220 mm x 300 mm. For now,", "to 220 mm x 300 mm. For now, I will keep the existing", "bed from 220 mm x 220 mm to 220 mm x 300 mm.", "300 mm. For now, I will keep the existing bed and add and", "printer. I am extending the bed from 220 mm x 220 mm to", "mm. For now, I will keep the existing bed and add and aluminum", "back of the original bed. Right now I only plan on running PLA;", "I am extending the bed of my TronXY X3 FDM RepRap printer. I", "of my TronXY X3 FDM RepRap printer. I am extending the bed from", "of the original bed. Right now I only plan on running PLA; but,", "top. That leaves 40mm on front and back of the original bed. Right", "PLA; but, I do plan on heating the bed. How thick does the", "and add and aluminum sheet on top. That leaves 40mm on front and", "bed and add and aluminum sheet on top. That leaves 40mm on front", "plan on running PLA; but, I do plan on heating the bed. How", "I only plan on running PLA; but, I do plan on heating the", "my TronXY X3 FDM RepRap printer. I am extending the bed from 220", "extending the bed from 220 mm x 220 mm to 220 mm x", "now, I will keep the existing bed and add and aluminum sheet on", "Right now I only plan on running PLA; but, I do plan on", "plan on heating the bed. How thick does the aluminum sheet need to", "mm to 220 mm x 300 mm. For now, I will keep the", "the existing bed and add and aluminum sheet on top. That leaves 40mm", "extending the bed of my TronXY X3 FDM RepRap printer. I am extending", "original bed. Right now I only plan on running PLA; but, I do", "on running PLA; but, I do plan on heating the bed. How thick", "the bed of my TronXY X3 FDM RepRap printer. I am extending the", "on heating the bed. How thick does the aluminum sheet need to be?", "front and back of the original bed. Right now I only plan on", "bed. Right now I only plan on running PLA; but, I do plan", "am extending the bed from 220 mm x 220 mm to 220 mm", "on front and back of the original bed. Right now I only plan", "40mm on front and back of the original bed. Right now I only", "mm x 300 mm. For now, I will keep the existing bed and", "I am extending the bed from 220 mm x 220 mm to 220", "x 220 mm to 220 mm x 300 mm. For now, I will", "add and aluminum sheet on top. That leaves 40mm on front and back", "aluminum sheet on top. That leaves 40mm on front and back of the", "For now, I will keep the existing bed and add and aluminum sheet", "leaves 40mm on front and back of the original bed. Right now I", "I will keep the existing bed and add and aluminum sheet on top.", "220 mm x 300 mm. For now, I will keep the existing bed", "the original bed. Right now I only plan on running PLA; but, I", "TronXY X3 FDM RepRap printer. I am extending the bed from 220 mm", "bed of my TronXY X3 FDM RepRap printer. I am extending the bed", "running PLA; but, I do plan on heating the bed. How thick does", "am extending the bed of my TronXY X3 FDM RepRap printer. I am" ]
[ "process\") Googling mesh to solid shows that in various tools such as 3ds", "created manually by visually comparing to the mesh or the cross section when", "solid but I am looking for the minimum enclosing sphere and box to", "manually by visually comparing to the mesh or the cross section when creating", "the minimum enclosing sphere and box to be generated/calculated by the software. Source", "shows that in various tools such as 3ds Max, Fusion, etc., manual approximation", "that in various tools such as 3ds Max, Fusion, etc., manual approximation of", "the sphere might go is created manually by visually comparing to the mesh", "a box solid that will be subtracted from it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png", "when creating the solid but I am looking for the minimum enclosing sphere", "format is of course not an issue, it can be any known mesh", "shape of half a sphere. I want to easily convert it to the", "of where the sphere might go is created manually by visually comparing to", "to easily convert it to the containing sphere solid and a box solid", "section when creating the solid but I am looking for the minimum enclosing", "Fusion, etc., manual approximation of where the sphere might go is created manually", "a bowl that has the perfect shape of half a sphere. I want", "or the cross section when creating the solid but I am looking for", "sphere and box to be generated/calculated by the software. Source file format is", "creating the solid but I am looking for the minimum enclosing sphere and", "to solid shows that in various tools such as 3ds Max, Fusion, etc.,", "I want to easily convert it to the containing sphere solid and a", "of half a sphere. I want to easily convert it to the containing", "mesh of a bowl that has the perfect shape of half a sphere.", "\"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\") Googling mesh to solid shows that in various tools", "looking for the minimum enclosing sphere and box to be generated/calculated by the", "various tools such as 3ds Max, Fusion, etc., manual approximation of where the", "box solid that will be subtracted from it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion", "etc., manual approximation of where the sphere might go is created manually by", "but I am looking for the minimum enclosing sphere and box to be", "solid that will be subtracted from it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")", "and a box solid that will be subtracted from it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion", "is of course not an issue, it can be any known mesh file.", "box to be generated/calculated by the software. Source file format is of course", "be subtracted from it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\") Googling mesh to", "software. Source file format is of course not an issue, it can be", "go is created manually by visually comparing to the mesh or the cross", "a mesh of a bowl that has the perfect shape of half a", "process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\") Googling mesh to solid shows that in various", "to the mesh or the cross section when creating the solid but I", "to be generated/calculated by the software. Source file format is of course not", "convert it to the containing sphere solid and a box solid that will", "tools such as 3ds Max, Fusion, etc., manual approximation of where the sphere", "and box to be generated/calculated by the software. Source file format is of", "3ds Max, Fusion, etc., manual approximation of where the sphere might go is", "process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\") Googling mesh to solid shows that in various tools such", "is created manually by visually comparing to the mesh or the cross section", "by visually comparing to the mesh or the cross section when creating the", "am looking for the minimum enclosing sphere and box to be generated/calculated by", "sphere might go is created manually by visually comparing to the mesh or", "from it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\") Googling mesh to solid shows", "sphere solid and a box solid that will be subtracted from it. [![Conversion", "solid shows that in various tools such as 3ds Max, Fusion, etc., manual", "sphere. I want to easily convert it to the containing sphere solid and", "that will be subtracted from it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\") Googling", "easily convert it to the containing sphere solid and a box solid that", "the software. Source file format is of course not an issue, it can", "be generated/calculated by the software. Source file format is of course not an", "manual approximation of where the sphere might go is created manually by visually", "enclosing sphere and box to be generated/calculated by the software. Source file format", "perfect shape of half a sphere. I want to easily convert it to", "subtracted from it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\") Googling mesh to solid", "the solid but I am looking for the minimum enclosing sphere and box", "of a bowl that has the perfect shape of half a sphere. I", "mesh to solid shows that in various tools such as 3ds Max, Fusion,", "\"Conversion process\") Googling mesh to solid shows that in various tools such as", "cross section when creating the solid but I am looking for the minimum", "as 3ds Max, Fusion, etc., manual approximation of where the sphere might go", "[![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\") Googling mesh to solid shows that in", "mesh or the cross section when creating the solid but I am looking", "Googling mesh to solid shows that in various tools such as 3ds Max,", "to the containing sphere solid and a box solid that will be subtracted", "might go is created manually by visually comparing to the mesh or the", "the mesh or the cross section when creating the solid but I am", "the containing sphere solid and a box solid that will be subtracted from", "minimum enclosing sphere and box to be generated/calculated by the software. Source file", "in various tools such as 3ds Max, Fusion, etc., manual approximation of where", "have a mesh of a bowl that has the perfect shape of half", "the cross section when creating the solid but I am looking for the", "a sphere. I want to easily convert it to the containing sphere solid", "Max, Fusion, etc., manual approximation of where the sphere might go is created", "want to easily convert it to the containing sphere solid and a box", "by the software. Source file format is of course not an issue, it", "it to the containing sphere solid and a box solid that will be", "half a sphere. I want to easily convert it to the containing sphere", "generated/calculated by the software. Source file format is of course not an issue,", "containing sphere solid and a box solid that will be subtracted from it.", "visually comparing to the mesh or the cross section when creating the solid", "will be subtracted from it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\") Googling mesh", "solid and a box solid that will be subtracted from it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png", "such as 3ds Max, Fusion, etc., manual approximation of where the sphere might", "I have a mesh of a bowl that has the perfect shape of", "has the perfect shape of half a sphere. I want to easily convert", "for the minimum enclosing sphere and box to be generated/calculated by the software.", "it. [![Conversion process](https://i.stack.imgur.com/FlT0X.png \"Conversion process\")](https://i.stack.imgur.com/FlT0X.png \"Conversion process\") Googling mesh to solid shows that", "comparing to the mesh or the cross section when creating the solid but", "bowl that has the perfect shape of half a sphere. I want to", "approximation of where the sphere might go is created manually by visually comparing", "Source file format is of course not an issue, it can be any", "that has the perfect shape of half a sphere. I want to easily", "where the sphere might go is created manually by visually comparing to the", "I am looking for the minimum enclosing sphere and box to be generated/calculated", "the perfect shape of half a sphere. I want to easily convert it", "file format is of course not an issue, it can be any known" ]
[ "the slicing softwares provide. Is there a standard technique behind this and how", "estimates that the slicing softwares provide. Is there a standard technique behind this", "that the slicing softwares provide. Is there a standard technique behind this and", "the algorithm/principles behind the estimates that the slicing softwares provide. Is there a", "I am curious about the algorithm/principles behind the estimates that the slicing softwares", "curious about the algorithm/principles behind the estimates that the slicing softwares provide. Is", "behind the estimates that the slicing softwares provide. Is there a standard technique", "am curious about the algorithm/principles behind the estimates that the slicing softwares provide.", "algorithm/principles behind the estimates that the slicing softwares provide. Is there a standard", "provide. Is there a standard technique behind this and how accurate is it", "about the algorithm/principles behind the estimates that the slicing softwares provide. Is there", "softwares provide. Is there a standard technique behind this and how accurate is", "Is there a standard technique behind this and how accurate is it ?", "slicing softwares provide. Is there a standard technique behind this and how accurate", "the estimates that the slicing softwares provide. Is there a standard technique behind" ]
[ "`/Applications/Cura262`. How can I copy my printer and profile settings from Cura 2.5", "versions of Cura installed, in `/Applications/Cura250` and `/Applications/Cura262`. How can I copy my", "I copy my printer and profile settings from Cura 2.5 to Cura 2.6?", "can I copy my printer and profile settings from Cura 2.5 to Cura", "two versions of Cura installed, in `/Applications/Cura250` and `/Applications/Cura262`. How can I copy", "my Mac I've got two versions of Cura installed, in `/Applications/Cura250` and `/Applications/Cura262`.", "and `/Applications/Cura262`. How can I copy my printer and profile settings from Cura", "On my Mac I've got two versions of Cura installed, in `/Applications/Cura250` and", "`/Applications/Cura250` and `/Applications/Cura262`. How can I copy my printer and profile settings from", "of Cura installed, in `/Applications/Cura250` and `/Applications/Cura262`. How can I copy my printer", "Mac I've got two versions of Cura installed, in `/Applications/Cura250` and `/Applications/Cura262`. How", "I've got two versions of Cura installed, in `/Applications/Cura250` and `/Applications/Cura262`. How can", "Cura installed, in `/Applications/Cura250` and `/Applications/Cura262`. How can I copy my printer and", "installed, in `/Applications/Cura250` and `/Applications/Cura262`. How can I copy my printer and profile", "got two versions of Cura installed, in `/Applications/Cura250` and `/Applications/Cura262`. How can I", "in `/Applications/Cura250` and `/Applications/Cura262`. How can I copy my printer and profile settings", "How can I copy my printer and profile settings from Cura 2.5 to" ]
[ "personal usage, indoor, I'm doing some experiments with following lamp (v0.1): [![enter image", "feels only slightly hot, I suppose around 40ºC. According to www info, PLA", "from this usage, but a continuous operative temperature of only 40ºC ( !?", "own one, where ambient in summer is around 40ºC). So, my question, is", "150ºC, far from this usage, but a continuous operative temperature of only 40ºC", "led bulb enclosed in a methacrylate tube and with a 3D printed finish", "here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is a led bulb enclosed in a methacrylate tube and with", "and the PLA feels only slightly hot, I suppose around 40ºC. According to", "with a 3D printed finish at the top using PLA (my first 3d", "some experiments with following lamp (v0.1): [![enter image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is a", "40ºC. According to www info, PLA has a melting point of 150ºC, far", "where ambient in summer is around 40ºC). So, my question, is PLA a", "unable in a country as my own one, where ambient in summer is", "experiments with following lamp (v0.1): [![enter image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is a led", "but a continuous operative temperature of only 40ºC ( !? this made 3d", "C. Experimentally, the methacrylate and the PLA feels only slightly hot, I suppose", "led buld radiator can reach 90º C. Experimentally, the methacrylate and the PLA", "usage, but a continuous operative temperature of only 40ºC ( !? this made", "the PLA feels only slightly hot, I suppose around 40ºC. According to www", "of only 40ºC ( !? this made 3d printing unable in a country", "this usage, but a continuous operative temperature of only 40ºC ( !? this", "print ;-). In some www pages (by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read that the", "in a country as my own one, where ambient in summer is around", "image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is a led bulb enclosed in a methacrylate tube", "[![enter image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is a led bulb enclosed in a methacrylate", "3d print ;-). In some www pages (by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read that", "read that the led buld radiator can reach 90º C. Experimentally, the methacrylate", "the methacrylate and the PLA feels only slightly hot, I suppose around 40ºC.", "around 40ºC). So, my question, is PLA a valid material for this application?", "!? this made 3d printing unable in a country as my own one,", "one, where ambient in summer is around 40ºC). So, my question, is PLA", "is around 40ºC). So, my question, is PLA a valid material for this", "melting point of 150ºC, far from this usage, but a continuous operative temperature", "hot, I suppose around 40ºC. According to www info, PLA has a melting", "methacrylate tube and with a 3D printed finish at the top using PLA", "PLA feels only slightly hot, I suppose around 40ºC. According to www info,", "40ºC ( !? this made 3d printing unable in a country as my", "the led buld radiator can reach 90º C. Experimentally, the methacrylate and the", "is a led bulb enclosed in a methacrylate tube and with a 3D", "buld radiator can reach 90º C. Experimentally, the methacrylate and the PLA feels", "first 3d print ;-). In some www pages (by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read", "summer is around 40ºC). So, my question, is PLA a valid material for", "I suppose around 40ºC. According to www info, PLA has a melting point", "( !? this made 3d printing unable in a country as my own", "40ºC). So, my question, is PLA a valid material for this application? If", "a 3D printed finish at the top using PLA (my first 3d print", "can reach 90º C. Experimentally, the methacrylate and the PLA feels only slightly", "as my own one, where ambient in summer is around 40ºC). So, my", "indoor, I'm doing some experiments with following lamp (v0.1): [![enter image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg)", "question, is PLA a valid material for this application? If not, some other", "methacrylate and the PLA feels only slightly hot, I suppose around 40ºC. According", "in summer is around 40ºC). So, my question, is PLA a valid material", "in a methacrylate tube and with a 3D printed finish at the top", "a country as my own one, where ambient in summer is around 40ºC).", "usage, indoor, I'm doing some experiments with following lamp (v0.1): [![enter image description", "operative temperature of only 40ºC ( !? this made 3d printing unable in", ";-). In some www pages (by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read that the led", "to www info, PLA has a melting point of 150ºC, far from this", "my own one, where ambient in summer is around 40ºC). So, my question,", "doing some experiments with following lamp (v0.1): [![enter image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is", "printing unable in a country as my own one, where ambient in summer", "at the top using PLA (my first 3d print ;-). In some www", "only 40ºC ( !? this made 3d printing unable in a country as", "the top using PLA (my first 3d print ;-). In some www pages", "According to www info, PLA has a melting point of 150ºC, far from", "continuous operative temperature of only 40ºC ( !? this made 3d printing unable", "PLA has a melting point of 150ºC, far from this usage, but a", "temperature of only 40ºC ( !? this made 3d printing unable in a", "my question, is PLA a valid material for this application? If not, some", "bulb enclosed in a methacrylate tube and with a 3D printed finish at", "a led bulb enclosed in a methacrylate tube and with a 3D printed", "using PLA (my first 3d print ;-). In some www pages (by example,", "a valid material for this application? If not, some other one better? Thanks", "ambient in summer is around 40ºC). So, my question, is PLA a valid", "following lamp (v0.1): [![enter image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is a led bulb enclosed", "info, PLA has a melting point of 150ºC, far from this usage, but", "www info, PLA has a melting point of 150ºC, far from this usage,", "3D printed finish at the top using PLA (my first 3d print ;-).", "far from this usage, but a continuous operative temperature of only 40ºC (", "LakhmJ is a led bulb enclosed in a methacrylate tube and with a", "pages (by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read that the led buld radiator can reach", "radiator can reach 90º C. Experimentally, the methacrylate and the PLA feels only", "some www pages (by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read that the led buld radiator", "valid material for this application? If not, some other one better? Thanks a", "slightly hot, I suppose around 40ºC. According to www info, PLA has a", "So, my question, is PLA a valid material for this application? If not,", "I'm doing some experiments with following lamp (v0.1): [![enter image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ", "this made 3d printing unable in a country as my own one, where", "has a melting point of 150ºC, far from this usage, but a continuous", "printed finish at the top using PLA (my first 3d print ;-). In", "PLA a valid material for this application? If not, some other one better?", "lamp (v0.1): [![enter image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is a led bulb enclosed in", "suppose around 40ºC. According to www info, PLA has a melting point of", "of 150ºC, far from this usage, but a continuous operative temperature of only", "with following lamp (v0.1): [![enter image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is a led bulb", "top using PLA (my first 3d print ;-). In some www pages (by", "around 40ºC. According to www info, PLA has a melting point of 150ºC,", "reach 90º C. Experimentally, the methacrylate and the PLA feels only slightly hot,", "For personal usage, indoor, I'm doing some experiments with following lamp (v0.1): [![enter", "(v0.1): [![enter image description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is a led bulb enclosed in a", "a methacrylate tube and with a 3D printed finish at the top using", "www pages (by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read that the led buld radiator can", "Experimentally, the methacrylate and the PLA feels only slightly hot, I suppose around", "that the led buld radiator can reach 90º C. Experimentally, the methacrylate and", "3d printing unable in a country as my own one, where ambient in", "example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read that the led buld radiator can reach 90º C.", "and with a 3D printed finish at the top using PLA (my first", "a continuous operative temperature of only 40ºC ( !? this made 3d printing", "(my first 3d print ;-). In some www pages (by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've", "is PLA a valid material for this application? If not, some other one", "a melting point of 150ºC, far from this usage, but a continuous operative", "I've read that the led buld radiator can reach 90º C. Experimentally, the", "tube and with a 3D printed finish at the top using PLA (my", "(by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read that the led buld radiator can reach 90º", "finish at the top using PLA (my first 3d print ;-). In some", "country as my own one, where ambient in summer is around 40ºC). So,", "description here](https://i.stack.imgur.com/SrEhy.jpg)](https://i.stack.imgur.com/SrEhy.jpg) LakhmJ is a led bulb enclosed in a methacrylate tube and", "made 3d printing unable in a country as my own one, where ambient", "[here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read that the led buld radiator can reach 90º C. Experimentally,", "point of 150ºC, far from this usage, but a continuous operative temperature of", "PLA (my first 3d print ;-). In some www pages (by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs))", "only slightly hot, I suppose around 40ºC. According to www info, PLA has", "In some www pages (by example, [here](https://www.lifx.com/blogs/the-latest/19032975-how-hot-are-led-light-bulbs)) I've read that the led buld", "material for this application? If not, some other one better? Thanks a lot.", "enclosed in a methacrylate tube and with a 3D printed finish at the", "90º C. Experimentally, the methacrylate and the PLA feels only slightly hot, I" ]
[ "market news on it's website? How can they spend 222 million in investment", "mass market production cost. The only access method for one is a USD$", "161,250 yearly subscription. Their printer is not available in shapeways... Is there something", "a simple and cheap mechanism using a Teflon layer. It appears to have", "market, and has no market news on it's website? How can they spend", "spend 222 million in investment money and not have a 3d printer in", "only access method for one is a USD$ 161,250 yearly subscription. Their printer", "a USD$ 161,250 yearly subscription. Their printer is not available in shapeways... Is", "in shapeways... Is there something wrong with Carbon 3D so that it does", "wrong with Carbon 3D so that it does not view consumers as a", "it's website? How can they spend 222 million in investment money and not", "100x faster printer which has a simple and cheap mechanism using a Teflon", "million in investment money and not have a 3d printer in shapeways or", "there something wrong with Carbon 3D so that it does not view consumers", "layer. It appears to have a 20mn in RnD Costs and $7000 mass", "How can they spend 222 million in investment money and not have a", "can they spend 222 million in investment money and not have a 3d", "not view consumers as a direct market, and has no market news on", "has a simple and cheap mechanism using a Teflon layer. It appears to", "no market news on it's website? How can they spend 222 million in", "a Teflon layer. It appears to have a 20mn in RnD Costs and", "it does not view consumers as a direct market, and has no market", "they spend 222 million in investment money and not have a 3d printer", "has no market news on it's website? How can they spend 222 million", "is not available in shapeways... Is there something wrong with Carbon 3D so", "RnD Costs and $7000 mass market production cost. The only access method for", "20mn in RnD Costs and $7000 mass market production cost. The only access", "not available in shapeways... Is there something wrong with Carbon 3D so that", "faster printer which has a simple and cheap mechanism using a Teflon layer.", "cost. The only access method for one is a USD$ 161,250 yearly subscription.", "Is there something wrong with Carbon 3D so that it does not view", "as a direct market, and has no market news on it's website? How", "a direct market, and has no market news on it's website? How can", "available in shapeways... Is there something wrong with Carbon 3D so that it", "Costs and $7000 mass market production cost. The only access method for one", "that it does not view consumers as a direct market, and has no", "a 20mn in RnD Costs and $7000 mass market production cost. The only", "and $7000 mass market production cost. The only access method for one is", "consumers as a direct market, and has no market news on it's website?", "direct market, and has no market news on it's website? How can they", "to have a 20mn in RnD Costs and $7000 mass market production cost.", "3d made a 100x faster printer which has a simple and cheap mechanism", "subscription. Their printer is not available in shapeways... Is there something wrong with", "on it's website? How can they spend 222 million in investment money and", "website? How can they spend 222 million in investment money and not have", "a 100x faster printer which has a simple and cheap mechanism using a", "simple and cheap mechanism using a Teflon layer. It appears to have a", "Their printer is not available in shapeways... Is there something wrong with Carbon", "made a 100x faster printer which has a simple and cheap mechanism using", "cheap mechanism using a Teflon layer. It appears to have a 20mn in", "using a Teflon layer. It appears to have a 20mn in RnD Costs", "It appears to have a 20mn in RnD Costs and $7000 mass market", "and cheap mechanism using a Teflon layer. It appears to have a 20mn", "view consumers as a direct market, and has no market news on it's", "which has a simple and cheap mechanism using a Teflon layer. It appears", "news on it's website? How can they spend 222 million in investment money", "$7000 mass market production cost. The only access method for one is a", "market production cost. The only access method for one is a USD$ 161,250", "3D so that it does not view consumers as a direct market, and", "appears to have a 20mn in RnD Costs and $7000 mass market production", "shapeways... Is there something wrong with Carbon 3D so that it does not", "one is a USD$ 161,250 yearly subscription. Their printer is not available in", "and has no market news on it's website? How can they spend 222", "does not view consumers as a direct market, and has no market news", "in investment money and not have a 3d printer in shapeways or public", "for one is a USD$ 161,250 yearly subscription. Their printer is not available", "Teflon layer. It appears to have a 20mn in RnD Costs and $7000", "access method for one is a USD$ 161,250 yearly subscription. Their printer is", "printer which has a simple and cheap mechanism using a Teflon layer. It", "so that it does not view consumers as a direct market, and has", "Carbon 3D so that it does not view consumers as a direct market,", "Carbon 3d made a 100x faster printer which has a simple and cheap", "method for one is a USD$ 161,250 yearly subscription. Their printer is not", "The only access method for one is a USD$ 161,250 yearly subscription. Their", "something wrong with Carbon 3D so that it does not view consumers as", "USD$ 161,250 yearly subscription. Their printer is not available in shapeways... Is there", "investment money and not have a 3d printer in shapeways or public access?", "is a USD$ 161,250 yearly subscription. Their printer is not available in shapeways...", "yearly subscription. Their printer is not available in shapeways... Is there something wrong", "222 million in investment money and not have a 3d printer in shapeways", "mechanism using a Teflon layer. It appears to have a 20mn in RnD", "printer is not available in shapeways... Is there something wrong with Carbon 3D", "production cost. The only access method for one is a USD$ 161,250 yearly", "with Carbon 3D so that it does not view consumers as a direct", "in RnD Costs and $7000 mass market production cost. The only access method", "have a 20mn in RnD Costs and $7000 mass market production cost. The" ]
[ "Fillamentum ABS white plastic. The model has been sliced in Siplify 3D with", "irregular and layer separation by adjusting some of the settings, and not significantly", "using Prusa I3 MK2 and a Fillamentum ABS white plastic. The model has", "mm * perimeter shells: 3 layers (almost entirely fills up the wall) ", "which is already 13 hours? PICTURES: [![enter image description here](https://i.stack.imgur.com/vNvWx.jpg)](https://i.stack.imgur.com/vNvWx.jpg) [![enter image description", "minor layer separation when printing a body for a tipping-bucket rain gauge, which", "has been sliced in Siplify 3D* with the following settings: * layer height:", "printing speed: default - 50 mm/s, outline - 35 mm/s, infill - 35", "Siplify 3D with the following settings: * layer height: 0.2 mm * perimeter", "settings, and not significantly increasing the printing time, which is already 13 hours?", "* printing speed: default - 50 mm/s, outline - 35 mm/s, infill -", "* layer height: 0.2 mm * perimeter shells: 3 layers (almost entirely fills", "up the wall) * extruder temperature: 230 °C * printing speed: default -", "for a tipping-bucket rain gauge, which is basically a hollow tube with thin", "Is it possible to prevent the irregular and layer separation by adjusting some", "a Fillamentum ABS white plastic. The model has been sliced in Siplify 3D", "and not significantly increasing the printing time, which is already 13 hours? PICTURES:", "significantly increasing the printing time, which is already 13 hours? PICTURES: [![enter image", "and a Fillamentum ABS white plastic. The model has been sliced in *Siplify", "height: 0.2 mm perimeter shells: 3 layers (almost entirely fills up the", "separation when printing a body for a tipping-bucket rain gauge, which is basically", "I am experiencing a minor layer separation when printing a body for a", "gauge, which is basically a hollow tube with thin walls (3 mm). I", "wall) * extruder temperature: 230 °C * printing speed: default - 50 mm/s,", "extruder temperature: 230 °C * printing speed: default - 50 mm/s, outline -", "increasing the printing time, which is already 13 hours? PICTURES: [![enter image description", "thin walls (3 mm). I am using Prusa I3 MK2 and a *Fillamentum", "time, which is already 13 hours? PICTURES: [![enter image description here](https://i.stack.imgur.com/vNvWx.jpg)](https://i.stack.imgur.com/vNvWx.jpg) [![enter image", "230 °C printing speed: default - 50 mm/s, outline - 35 mm/s,", "infill - 35 mm/s Is it possible to prevent the irregular and layer", "model has been sliced in Siplify 3D with the following settings: * layer", "* perimeter shells: 3 layers (almost entirely fills up the wall) * extruder", "hollow tube with thin walls (3 mm). I am using Prusa I3 MK2", "the printing time, which is already 13 hours? PICTURES: [![enter image description here](https://i.stack.imgur.com/vNvWx.jpg)](https://i.stack.imgur.com/vNvWx.jpg)", "°C * printing speed: default - 50 mm/s, outline - 35 mm/s, infill", "by adjusting some of the settings, and not significantly increasing the printing time,", "MK2 and a Fillamentum ABS** white plastic. The model has been sliced in", "shells: 3 layers (almost entirely fills up the wall) * extruder temperature: 230", "The model has been sliced in Siplify 3D with the following settings: ", "am experiencing a minor layer separation when printing a body for a tipping-bucket", "printing a body for a tipping-bucket rain gauge, which is basically a hollow", "to prevent the irregular and layer separation by adjusting some of the settings,", "with the following settings: layer height: 0.2 mm * perimeter shells: 3", "layer separation when printing a body for a tipping-bucket rain gauge, which is", "and layer separation by adjusting some of the settings, and not significantly increasing", "with thin walls (3 mm). I am using Prusa I3 MK2 and a", "mm/s, infill - 35 mm/s Is it possible to prevent the irregular and", "layer height: 0.2 mm * perimeter shells: 3 layers (almost entirely fills up", "the settings, and not significantly increasing the printing time, which is already 13", "it possible to prevent the irregular and layer separation by adjusting some of", "35 mm/s Is it possible to prevent the irregular and layer separation by", "possible to prevent the irregular and layer separation by adjusting some of the", "a body for a tipping-bucket rain gauge, which is basically a hollow tube", "I3 MK2 and a Fillamentum ABS** white plastic. The model has been sliced", "(almost entirely fills up the wall) * extruder temperature: 230 °C * printing", "default - 50 mm/s, outline - 35 mm/s, infill - 35 mm/s Is", "- 35 mm/s, infill - 35 mm/s Is it possible to prevent the", "temperature: 230 °C * printing speed: default - 50 mm/s, outline - 35", "mm/s, outline - 35 mm/s, infill - 35 mm/s Is it possible to", "rain gauge, which is basically a hollow tube with thin walls (3 mm).", "in Siplify 3D with the following settings: * layer height: 0.2 mm ", "is basically a hollow tube with thin walls (3 mm). I am using", "35 mm/s, infill - 35 mm/s Is it possible to prevent the irregular", "settings: layer height: 0.2 mm * perimeter shells: 3 layers (almost entirely", "fills up the wall) * extruder temperature: 230 °C * printing speed: default", "printing time, which is already 13 hours? PICTURES: [![enter image description here](https://i.stack.imgur.com/vNvWx.jpg)](https://i.stack.imgur.com/vNvWx.jpg) [![enter", "ABS white plastic. The model has been sliced in Siplify 3D** with the", "the following settings: * layer height: 0.2 mm * perimeter shells: 3 layers", "0.2 mm * perimeter shells: 3 layers (almost entirely fills up the wall)", "mm/s Is it possible to prevent the irregular and layer separation by adjusting", "3 layers (almost entirely fills up the wall) * extruder temperature: 230 °C", "* extruder temperature: 230 °C * printing speed: default - 50 mm/s, outline", "some of the settings, and not significantly increasing the printing time, which is", "walls (3 mm). I am using Prusa I3 MK2 and a Fillamentum ABS", "of the settings, and not significantly increasing the printing time, which is already", "perimeter shells: 3 layers (almost entirely fills up the wall) * extruder temperature:", "the irregular and layer separation by adjusting some of the settings, and not", "(3 mm). I am using Prusa I3 MK2 and a Fillamentum ABS white", "prevent the irregular and layer separation by adjusting some of the settings, and", "the wall) * extruder temperature: 230 °C * printing speed: default - 50", "mm). I am using Prusa I3 MK2 and a Fillamentum ABS white plastic.", "white plastic. The model has been sliced in Siplify 3D with the following", "adjusting some of the settings, and not significantly increasing the printing time, which", "tipping-bucket rain gauge, which is basically a hollow tube with thin walls (3", "am using Prusa I3 MK2 and a Fillamentum ABS white plastic. The model", "following settings: * layer height: 0.2 mm * perimeter shells: 3 layers (almost", "layer separation by adjusting some of the settings, and not significantly increasing the", "experiencing a minor layer separation when printing a body for a tipping-bucket rain", "not significantly increasing the printing time, which is already 13 hours? PICTURES: [![enter", "been sliced in Siplify 3D with the following settings: * layer height: 0.2", "layers (almost entirely fills up the wall) * extruder temperature: 230 °C ", "body for a tipping-bucket rain gauge, which is basically a hollow tube with", "is already 13 hours? PICTURES: [![enter image description here](https://i.stack.imgur.com/vNvWx.jpg)](https://i.stack.imgur.com/vNvWx.jpg) [![enter image description here](https://i.stack.imgur.com/93hzZ.jpg)](https://i.stack.imgur.com/93hzZ.jpg)", "50 mm/s, outline - 35 mm/s, infill - 35 mm/s Is it possible", "basically a hollow tube with thin walls (3 mm). I am using Prusa", "which is basically a hollow tube with thin walls (3 mm). I am", "entirely fills up the wall) extruder temperature: 230 °C * printing speed:", "- 35 mm/s Is it possible to prevent the irregular and layer separation", "tube with thin walls (3 mm). I am using Prusa I3 MK2 and", "when printing a body for a tipping-bucket rain gauge, which is basically a", "a tipping-bucket rain gauge, which is basically a hollow tube with thin walls", "sliced in Siplify 3D with the following settings: * layer height: 0.2 mm", "outline - 35 mm/s, infill - 35 mm/s Is it possible to prevent", "3D** with the following settings: * layer height: 0.2 mm * perimeter shells:", "I am using Prusa I3 MK2 and a Fillamentum ABS white plastic. The", "Prusa I3 MK2 and a Fillamentum ABS white plastic. The model has been", "a minor layer separation when printing a body for a tipping-bucket rain gauge,", "- 50 mm/s, outline - 35 mm/s, infill - 35 mm/s Is it", "speed: default - 50 mm/s, outline - 35 mm/s, infill - 35 mm/s", "plastic. The model has been sliced in Siplify 3D with the following settings:", "separation by adjusting some of the settings, and not significantly increasing the printing", "a hollow tube with thin walls (3 mm). I am using **Prusa I3" ]
[ "for some advice on which 3D printers are good for someone who is", "printers are good for someone who is just getting into 3D printing? I", "who is just getting into 3D printing? I have been looking at the", "3D printers are good for someone who is just getting into 3D printing?", "on ebay but not sure if they are any good or not. Regards", "at the Anet A8 on ebay but not sure if they are any", "for someone who is just getting into 3D printing? I have been looking", "getting into 3D printing? I have been looking at the Anet A8 on", "advice on which 3D printers are good for someone who is just getting", "I have been looking at the Anet A8 on ebay but not sure", "Anet A8 on ebay but not sure if they are any good or", "been looking at the Anet A8 on ebay but not sure if they", "into 3D printing? I have been looking at the Anet A8 on ebay", "which 3D printers are good for someone who is just getting into 3D", "just getting into 3D printing? I have been looking at the Anet A8", "some advice on which 3D printers are good for someone who is just", "3D printing? I have been looking at the Anet A8 on ebay but", "have been looking at the Anet A8 on ebay but not sure if", "looking for some advice on which 3D printers are good for someone who", "someone who is just getting into 3D printing? I have been looking at", "looking at the Anet A8 on ebay but not sure if they are", "the Anet A8 on ebay but not sure if they are any good", "on which 3D printers are good for someone who is just getting into", "good for someone who is just getting into 3D printing? I have been", "I was looking for some advice on which 3D printers are good for", "are good for someone who is just getting into 3D printing? I have", "printing? I have been looking at the Anet A8 on ebay but not", "is just getting into 3D printing? I have been looking at the Anet", "A8 on ebay but not sure if they are any good or not.", "was looking for some advice on which 3D printers are good for someone" ]
[ "bit. * Bed heated to 75 degrees. I tried 100 but got hit", "PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> * I am coating my hotbead with clear packaging adhesive (OPP", "Runaway\" error which I believe indicates that not enough voltage is getting to", "which I believe indicates that not enough voltage is getting to the bed", "believe indicates that not enough voltage is getting to the bed heater. ", "stay down for an hour or two before starting to warp. Does anyone", "to the bed heater. I've tried printing at 220 degrees and 170", "\"Heatbed Thermal Runaway\" error which I believe indicates that not enough voltage is", "hour or two before starting to warp. Does anyone have any suggestions of", "tried printing at 220 degrees and 170 degrees. * I've tried enclosing the", "me achieve a good 3d print using polypropylene. I am trying to print", "cooling at. * Other settings: speed 40mm/s constant, 0.2mm layer height, 20% infill,", "wondering if anyone can help me achieve a good 3d print using polypropylene.", "an hour or two before starting to warp. Does anyone have any suggestions", "Mk2S with a Flexion extruder * I am using what I believe is", "material is cooling at. * Other settings: speed 40mm/s constant, 0.2mm layer height,", "I am wondering if anyone can help me achieve a good 3d print", "Flexion extruder * I am using what I believe is a good quality", "the manufacturers instructions. This appears to help quite a bit. * Bed heated", "settings: speed 40mm/s constant, 0.2mm layer height, 20% infill, 3 top bottom and", "for shoes and I'm getting some bad warping/lifting (see image). [![example of warping", "is getting to the bed heater. * I've tried printing at 220 degrees", "* I've tried enclosing the printer in a makeshift enclosure to reduce the", "to help quite a bit. * Bed heated to 75 degrees. I tried", "reduce the speed that the material is cooling at. * Other settings: speed", "what I believe is a good quality filament (Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> * I", "print using polypropylene. I am trying to print custom insoles for shoes and", "enclosing the printer in a makeshift enclosure to reduce the speed that the", "is cooling at. * Other settings: speed 40mm/s constant, 0.2mm layer height, 20%", "5 hours and seems to stay down for an hour or two before", "print custom insoles for shoes and I'm getting some bad warping/lifting (see image).", "custom insoles for shoes and I'm getting some bad warping/lifting (see image). [![example", "using polypropylene. I am trying to print custom insoles for shoes and I'm", "got hit with the \"Heatbed Thermal Runaway\" error which I believe indicates that", "takes about 5 hours and seems to stay down for an hour or", "indicates that not enough voltage is getting to the bed heater. * I've", "3 top bottom and side layers. The print takes about 5 hours and", "using what I believe is a good quality filament (Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> ", "to 75 degrees. I tried 100 but got hit with the \"Heatbed Thermal", "height, 20% infill, 3 top bottom and side layers. The print takes about", "and I'm getting some bad warping/lifting (see image). [![example of warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg)", "enclosure to reduce the speed that the material is cooling at. Other", "speed 40mm/s constant, 0.2mm layer height, 20% infill, 3 top bottom and side", "i3 Mk2S with a Flexion extruder * I am using what I believe", "per the manufacturers instructions. This appears to help quite a bit. * Bed", "with the \"Heatbed Thermal Runaway\" error which I believe indicates that not enough", "polypropylene. I am trying to print custom insoles for shoes and I'm getting", "about 5 hours and seems to stay down for an hour or two", "I am trying to print custom insoles for shoes and I'm getting some", "warping/lifting (see image). [![example of warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details about the print", "bottom and side layers. The print takes about 5 hours and seems to", "as per the manufacturers instructions. This appears to help quite a bit. ", "and seems to stay down for an hour or two before starting to", "using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details about the print and process: I have a", "20% infill, 3 top bottom and side layers. The print takes about 5", "that the material is cooling at. * Other settings: speed 40mm/s constant, 0.2mm", "down for an hour or two before starting to warp. Does anyone have", "some bad warping/lifting (see image). [![example of warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details about", "extruder * I am using what I believe is a good quality filament", "enough voltage is getting to the bed heater. * I've tried printing at", "makeshift enclosure to reduce the speed that the material is cooling at. ", "a good quality filament (Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> I am coating my hotbead", "I am using what I believe is a good quality filament (Verbatim PP):", "filament (Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> * I am coating my hotbead with clear packaging", "hotbead with clear packaging adhesive (OPP tape) as per the manufacturers instructions. This", "* Other settings: speed 40mm/s constant, 0.2mm layer height, 20% infill, 3 top", "The print takes about 5 hours and seems to stay down for an", "appears to help quite a bit. * Bed heated to 75 degrees. I", "<https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> * I am coating my hotbead with clear packaging adhesive (OPP tape)", "* I've tried printing at 220 degrees and 170 degrees. * I've tried", "a makeshift enclosure to reduce the speed that the material is cooling at.", "side layers. The print takes about 5 hours and seems to stay down", "process: * I have a Prusa i3 Mk2S with a Flexion extruder ", "220 degrees and 170 degrees. I've tried enclosing the printer in a", "layer height, 20% infill, 3 top bottom and side layers. The print takes", "a Prusa i3 Mk2S with a Flexion extruder * I am using what", "clear packaging adhesive (OPP tape) as per the manufacturers instructions. This appears to", "with a Flexion extruder * I am using what I believe is a", "in a makeshift enclosure to reduce the speed that the material is cooling", "details about the print and process: * I have a Prusa i3 Mk2S", "degrees. I tried 100 but got hit with the \"Heatbed Thermal Runaway\" error", "shoes and I'm getting some bad warping/lifting (see image). [![example of warping using", "but got hit with the \"Heatbed Thermal Runaway\" error which I believe indicates", "the speed that the material is cooling at. * Other settings: speed 40mm/s", "not enough voltage is getting to the bed heater. * I've tried printing", "print and process: * I have a Prusa i3 Mk2S with a Flexion", "I've tried printing at 220 degrees and 170 degrees. * I've tried enclosing", "tape) as per the manufacturers instructions. This appears to help quite a bit.", "quite a bit. * Bed heated to 75 degrees. I tried 100 but", "for an hour or two before starting to warp. Does anyone have any", "or two before starting to warp. Does anyone have any suggestions of things", "I'm getting some bad warping/lifting (see image). [![example of warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some", "good 3d print using polypropylene. I am trying to print custom insoles for", "and 170 degrees. * I've tried enclosing the printer in a makeshift enclosure", "two before starting to warp. Does anyone have any suggestions of things I", "I tried 100 but got hit with the \"Heatbed Thermal Runaway\" error which", "* Bed heated to 75 degrees. I tried 100 but got hit with", "warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details about the print and process: * I have", "printer in a makeshift enclosure to reduce the speed that the material is", "am using what I believe is a good quality filament (Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html>", "help me achieve a good 3d print using polypropylene. I am trying to", "coating my hotbead with clear packaging adhesive (OPP tape) as per the manufacturers", "voltage is getting to the bed heater. * I've tried printing at 220", "[![example of warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details about the print and process: ", "Prusa i3 Mk2S with a Flexion extruder I am using what I", "and side layers. The print takes about 5 hours and seems to stay", "layers. The print takes about 5 hours and seems to stay down for", "(see image). [![example of warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details about the print and", "a bit. * Bed heated to 75 degrees. I tried 100 but got", "with clear packaging adhesive (OPP tape) as per the manufacturers instructions. This appears", "heated to 75 degrees. I tried 100 but got hit with the \"Heatbed", "a good 3d print using polypropylene. I am trying to print custom insoles", "I believe indicates that not enough voltage is getting to the bed heater.", "tried 100 but got hit with the \"Heatbed Thermal Runaway\" error which I", "* I have a Prusa i3 Mk2S with a Flexion extruder * I", "bed heater. * I've tried printing at 220 degrees and 170 degrees. ", "hours and seems to stay down for an hour or two before starting", "have a Prusa i3 Mk2S with a Flexion extruder I am using", "the material is cooling at. * Other settings: speed 40mm/s constant, 0.2mm layer", "to print custom insoles for shoes and I'm getting some bad warping/lifting (see", "quality filament (Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> * I am coating my hotbead with clear", "am wondering if anyone can help me achieve a good 3d print using", "packaging adhesive (OPP tape) as per the manufacturers instructions. This appears to help", "75 degrees. I tried 100 but got hit with the \"Heatbed Thermal Runaway\"", "(OPP tape) as per the manufacturers instructions. This appears to help quite a", "0.2mm layer height, 20% infill, 3 top bottom and side layers. The print", "achieve a good 3d print using polypropylene. I am trying to print custom", "getting to the bed heater. * I've tried printing at 220 degrees and", "image). [![example of warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details about the print and process:", "am coating my hotbead with clear packaging adhesive (OPP tape) as per the", "* I am coating my hotbead with clear packaging adhesive (OPP tape) as", "at 220 degrees and 170 degrees. * I've tried enclosing the printer in", "top bottom and side layers. The print takes about 5 hours and seems", "starting to warp. Does anyone have any suggestions of things I should try?", "getting some bad warping/lifting (see image). [![example of warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details", "I am coating my hotbead with clear packaging adhesive (OPP tape) as per", "Other settings: speed 40mm/s constant, 0.2mm layer height, 20% infill, 3 top bottom", "the bed heater. * I've tried printing at 220 degrees and 170 degrees.", "the \"Heatbed Thermal Runaway\" error which I believe indicates that not enough voltage", "I have a Prusa i3 Mk2S with a Flexion extruder * I am", "(Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> * I am coating my hotbead with clear packaging adhesive", "3d print using polypropylene. I am trying to print custom insoles for shoes", "good quality filament (Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> * I am coating my hotbead with", "100 but got hit with the \"Heatbed Thermal Runaway\" error which I believe", "bad warping/lifting (see image). [![example of warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details about the", "hit with the \"Heatbed Thermal Runaway\" error which I believe indicates that not", "infill, 3 top bottom and side layers. The print takes about 5 hours", "polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details about the print and process: * I have a Prusa", "degrees and 170 degrees. * I've tried enclosing the printer in a makeshift", "Some details about the print and process: * I have a Prusa i3", "about the print and process: * I have a Prusa i3 Mk2S with", "the print and process: * I have a Prusa i3 Mk2S with a", "heater. * I've tried printing at 220 degrees and 170 degrees. * I've", "a Flexion extruder * I am using what I believe is a good", "40mm/s constant, 0.2mm layer height, 20% infill, 3 top bottom and side layers.", "adhesive (OPP tape) as per the manufacturers instructions. This appears to help quite", "help quite a bit. * Bed heated to 75 degrees. I tried 100", "can help me achieve a good 3d print using polypropylene. I am trying", "Thermal Runaway\" error which I believe indicates that not enough voltage is getting", "insoles for shoes and I'm getting some bad warping/lifting (see image). [![example of", "to stay down for an hour or two before starting to warp. Does", "This appears to help quite a bit. * Bed heated to 75 degrees.", "is a good quality filament (Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> * I am coating my", "believe is a good quality filament (Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> * I am coating", "the printer in a makeshift enclosure to reduce the speed that the material", "that not enough voltage is getting to the bed heater. * I've tried", "* I am using what I believe is a good quality filament (Verbatim", "trying to print custom insoles for shoes and I'm getting some bad warping/lifting", "my hotbead with clear packaging adhesive (OPP tape) as per the manufacturers instructions.", "I've tried enclosing the printer in a makeshift enclosure to reduce the speed", "instructions. This appears to help quite a bit. * Bed heated to 75", "printing at 220 degrees and 170 degrees. * I've tried enclosing the printer", "anyone can help me achieve a good 3d print using polypropylene. I am", "error which I believe indicates that not enough voltage is getting to the", "Bed heated to 75 degrees. I tried 100 but got hit with the", "of warping using polypropylene](https://i.stack.imgur.com/ZKi1R.jpg)](https://i.stack.imgur.com/ZKi1R.jpg) Some details about the print and process: * I", "speed that the material is cooling at. * Other settings: speed 40mm/s constant,", "seems to stay down for an hour or two before starting to warp.", "to reduce the speed that the material is cooling at. * Other settings:", "print takes about 5 hours and seems to stay down for an hour", "before starting to warp. Does anyone have any suggestions of things I should", "I believe is a good quality filament (Verbatim PP): <https://www.verbatim.com.au/3d-printing/pp-filament/3d-pp-filament.html> * I am", "am trying to print custom insoles for shoes and I'm getting some bad", "constant, 0.2mm layer height, 20% infill, 3 top bottom and side layers. The", "manufacturers instructions. This appears to help quite a bit. * Bed heated to", "tried enclosing the printer in a makeshift enclosure to reduce the speed that", "170 degrees. * I've tried enclosing the printer in a makeshift enclosure to", "degrees. * I've tried enclosing the printer in a makeshift enclosure to reduce", "and process: * I have a Prusa i3 Mk2S with a Flexion extruder", "if anyone can help me achieve a good 3d print using polypropylene. I", "at. * Other settings: speed 40mm/s constant, 0.2mm layer height, 20% infill, 3" ]
[ "started printing with PETG so I can create objects that won't deform if", "good, but have strings of material coming off the print in places. What", "have started printing with PETG so I can create objects that won't deform", "objects that won't deform if I leave them in my car. My first", "What should I try to prevent that? I haven't had this problem with", "of material coming off the print in places. What should I try to", "look good, but have strings of material coming off the print in places.", "I leave them in my car. My first prints look good, but have", "off the print in places. What should I try to prevent that? I", "prints look good, but have strings of material coming off the print in", "in places. What should I try to prevent that? I haven't had this", "can create objects that won't deform if I leave them in my car.", "but have strings of material coming off the print in places. What should", "with PETG so I can create objects that won't deform if I leave", "my car. My first prints look good, but have strings of material coming", "leave them in my car. My first prints look good, but have strings", "printing with PETG so I can create objects that won't deform if I", "the print in places. What should I try to prevent that? I haven't", "My first prints look good, but have strings of material coming off the", "car. My first prints look good, but have strings of material coming off", "coming off the print in places. What should I try to prevent that?", "them in my car. My first prints look good, but have strings of", "material coming off the print in places. What should I try to prevent", "deform if I leave them in my car. My first prints look good,", "so I can create objects that won't deform if I leave them in", "I have started printing with PETG so I can create objects that won't", "if I leave them in my car. My first prints look good, but", "create objects that won't deform if I leave them in my car. My", "should I try to prevent that? I haven't had this problem with PLA.", "that won't deform if I leave them in my car. My first prints", "have strings of material coming off the print in places. What should I", "PETG so I can create objects that won't deform if I leave them", "first prints look good, but have strings of material coming off the print", "places. What should I try to prevent that? I haven't had this problem", "I can create objects that won't deform if I leave them in my", "strings of material coming off the print in places. What should I try", "in my car. My first prints look good, but have strings of material", "won't deform if I leave them in my car. My first prints look", "print in places. What should I try to prevent that? I haven't had" ]
[ "bucks a pop. An alternate idea I had was to use two or", "done any DIY kits or anything) and materials engineering is probably the furthest", "use two or three heat pads and space them evenly under a glass", "pose this to more experienced makers: If I'm building a large scale printer", "entire enclosure as necessary. I want to do this to try and reduce", "PLA and MAYBE ABS occasionally, can I substitute the heated bed for simply", "heated bed for simply heating the entire enclosure? The idea would be to", "or two to hear the entire enclosure as necessary. I want to do", "80 bucks a pop. An alternate idea I had was to use two", "this to more experienced makers: If I'm building a large scale printer (probably", "size to substation33 - sub33D's 1200x1200 printer) that I'm only going to print", "probably the furthest thing from my area of expertise so I thought I", "idea would be to have a thermistor measuring the ambient air temp inside", "enclosure with a heat gun or two to hear the entire enclosure as", "(I'm getting pretty good prints from my Wanhao di3 plus, but haven't done", "The idea would be to have a thermistor measuring the ambient air temp", "similar size to substation33 - sub33D's 1200x1200 printer) that I'm only going to", "do this to try and reduce the cost (significantly as far as I", "idea I had was to use two or three heat pads and space", "go for about 80 bucks a pop. An alternate idea I had was", "tend to go for about 80 bucks a pop. An alternate idea I", "(significantly as far as I can tell) as it seems 400\\400 silicone heat", "I thought I would pose this to more experienced makers: If I'm building", "and MAYBE ABS occasionally, can I substitute the heated bed for simply heating", "my Wanhao di3 plus, but haven't done any DIY kits or anything) and", "a heat gun or two to hear the entire enclosure as necessary. I", "area of expertise so I thought I would pose this to more experienced", "only going to print in PLA and MAYBE ABS occasionally, can I substitute", "that I'm only going to print in PLA and MAYBE ABS occasionally, can", "print in PLA and MAYBE ABS occasionally, can I substitute the heated bed", "or three heat pads and space them evenly under a glass bed, although", "I want to do this to try and reduce the cost (significantly as", "work as well because the heating won't be homogenous... Any input is appreciated", "thought I would pose this to more experienced makers: If I'm building a", "heat pads tend to go for about 80 bucks a pop. An alternate", "sub33D's 1200x1200 printer) that I'm only going to print in PLA and MAYBE", "scale printer (probably a similar size to substation33 - sub33D's 1200x1200 printer) that", "plus, but haven't done any DIY kits or anything) and materials engineering is", "di3 plus, but haven't done any DIY kits or anything) and materials engineering", "simply heating the entire enclosure? The idea would be to have a thermistor", "with a heat gun or two to hear the entire enclosure as necessary.", "hear the entire enclosure as necessary. I want to do this to try", "An alternate idea I had was to use two or three heat pads", "to print in PLA and MAYBE ABS occasionally, can I substitute the heated", "is probably the furthest thing from my area of expertise so I thought", "I had was to use two or three heat pads and space them", "or anything) and materials engineering is probably the furthest thing from my area", "three heat pads and space them evenly under a glass bed, although I", "two or three heat pads and space them evenly under a glass bed,", "tell) as it seems 400\\400 silicone heat pads tend to go for about", "to substation33 - sub33D's 1200x1200 printer) that I'm only going to print in", "cost (significantly as far as I can tell) as it seems 400\\400 silicone", "kits or anything) and materials engineering is probably the furthest thing from my", "makers: If I'm building a large scale printer (probably a similar size to", "bed for simply heating the entire enclosure? The idea would be to have", "furthest thing from my area of expertise so I thought I would pose", "as I can tell) as it seems 400\\400 silicone heat pads tend to", "heating the entire enclosure? The idea would be to have a thermistor measuring", "to have a thermistor measuring the ambient air temp inside the enclosure with", "engineering is probably the furthest thing from my area of expertise so I", "a large scale printer (probably a similar size to substation33 - sub33D's 1200x1200", "have a thermistor measuring the ambient air temp inside the enclosure with a", "this won't work as well because the heating won't be homogenous... Any input", "a similar size to substation33 - sub33D's 1200x1200 printer) that I'm only going", "the cost (significantly as far as I can tell) as it seems 400\\400", "prints from my Wanhao di3 plus, but haven't done any DIY kits or", "the heated bed for simply heating the entire enclosure? The idea would be", "for about 80 bucks a pop. An alternate idea I had was to", "printer) that I'm only going to print in PLA and MAYBE ABS occasionally,", "as necessary. I want to do this to try and reduce the cost", "it seems 400\\400 silicone heat pads tend to go for about 80 bucks", "a pop. An alternate idea I had was to use two or three", "but haven't done any DIY kits or anything) and materials engineering is probably", "- sub33D's 1200x1200 printer) that I'm only going to print in PLA and", "pop. An alternate idea I had was to use two or three heat", "building a large scale printer (probably a similar size to substation33 - sub33D's", "MAYBE ABS occasionally, can I substitute the heated bed for simply heating the", "to use two or three heat pads and space them evenly under a", "heat pads and space them evenly under a glass bed, although I feel", "the entire enclosure? The idea would be to have a thermistor measuring the", "reduce the cost (significantly as far as I can tell) as it seems", "silicone heat pads tend to go for about 80 bucks a pop. An", "won't work as well because the heating won't be homogenous... Any input is", "want to do this to try and reduce the cost (significantly as far", "Wanhao di3 plus, but haven't done any DIY kits or anything) and materials", "experienced makers: If I'm building a large scale printer (probably a similar size", "far as I can tell) as it seems 400\\400 silicone heat pads tend", "be to have a thermistor measuring the ambient air temp inside the enclosure", "as far as I can tell) as it seems 400\\400 silicone heat pads", "entire enclosure? The idea would be to have a thermistor measuring the ambient", "the enclosure with a heat gun or two to hear the entire enclosure", "to try and reduce the cost (significantly as far as I can tell)", "printing (I'm getting pretty good prints from my Wanhao di3 plus, but haven't", "from my Wanhao di3 plus, but haven't done any DIY kits or anything)", "DIY kits or anything) and materials engineering is probably the furthest thing from", "air temp inside the enclosure with a heat gun or two to hear", "the entire enclosure as necessary. I want to do this to try and", "I'm only going to print in PLA and MAYBE ABS occasionally, can I", "in PLA and MAYBE ABS occasionally, can I substitute the heated bed for", "try and reduce the cost (significantly as far as I can tell) as", "inside the enclosure with a heat gun or two to hear the entire", "and reduce the cost (significantly as far as I can tell) as it", "had was to use two or three heat pads and space them evenly", "substation33 - sub33D's 1200x1200 printer) that I'm only going to print in PLA", "to go for about 80 bucks a pop. An alternate idea I had", "a glass bed, although I feel that this won't work as well because", "temp inside the enclosure with a heat gun or two to hear the", "that this won't work as well because the heating won't be homogenous... Any", "about 80 bucks a pop. An alternate idea I had was to use", "as well because the heating won't be homogenous... Any input is appreciated :)", "heat gun or two to hear the entire enclosure as necessary. I want", "to more experienced makers: If I'm building a large scale printer (probably a", "I'm /relatively/ new to 3d printing (I'm getting pretty good prints from my", "can tell) as it seems 400\\400 silicone heat pads tend to go for", "I would pose this to more experienced makers: If I'm building a large", "from my area of expertise so I thought I would pose this to", "feel that this won't work as well because the heating won't be homogenous...", "my area of expertise so I thought I would pose this to more", "space them evenly under a glass bed, although I feel that this won't", "I substitute the heated bed for simply heating the entire enclosure? The idea", "pads and space them evenly under a glass bed, although I feel that", "gun or two to hear the entire enclosure as necessary. I want to", "to hear the entire enclosure as necessary. I want to do this to", "enclosure as necessary. I want to do this to try and reduce the", "the furthest thing from my area of expertise so I thought I would", "(probably a similar size to substation33 - sub33D's 1200x1200 printer) that I'm only", "400\\400 silicone heat pads tend to go for about 80 bucks a pop.", "expertise so I thought I would pose this to more experienced makers: If", "thermistor measuring the ambient air temp inside the enclosure with a heat gun", "alternate idea I had was to use two or three heat pads and", "would be to have a thermistor measuring the ambient air temp inside the", "good prints from my Wanhao di3 plus, but haven't done any DIY kits", "If I'm building a large scale printer (probably a similar size to substation33", "ambient air temp inside the enclosure with a heat gun or two to", "two to hear the entire enclosure as necessary. I want to do this", "under a glass bed, although I feel that this won't work as well", "although I feel that this won't work as well because the heating won't", "of expertise so I thought I would pose this to more experienced makers:", "ABS occasionally, can I substitute the heated bed for simply heating the entire", "as it seems 400\\400 silicone heat pads tend to go for about 80", "large scale printer (probably a similar size to substation33 - sub33D's 1200x1200 printer)", "glass bed, although I feel that this won't work as well because the", "more experienced makers: If I'm building a large scale printer (probably a similar", "thing from my area of expertise so I thought I would pose this", "for simply heating the entire enclosure? The idea would be to have a", "a thermistor measuring the ambient air temp inside the enclosure with a heat", "any DIY kits or anything) and materials engineering is probably the furthest thing", "to 3d printing (I'm getting pretty good prints from my Wanhao di3 plus,", "the ambient air temp inside the enclosure with a heat gun or two", "materials engineering is probably the furthest thing from my area of expertise so", "measuring the ambient air temp inside the enclosure with a heat gun or", "necessary. I want to do this to try and reduce the cost (significantly", "I feel that this won't work as well because the heating won't be", "this to try and reduce the cost (significantly as far as I can", "3d printing (I'm getting pretty good prints from my Wanhao di3 plus, but", "them evenly under a glass bed, although I feel that this won't work", "bed, although I feel that this won't work as well because the heating", "enclosure? The idea would be to have a thermistor measuring the ambient air", "occasionally, can I substitute the heated bed for simply heating the entire enclosure?", "was to use two or three heat pads and space them evenly under", "can I substitute the heated bed for simply heating the entire enclosure? The", "printer (probably a similar size to substation33 - sub33D's 1200x1200 printer) that I'm", "would pose this to more experienced makers: If I'm building a large scale", "and materials engineering is probably the furthest thing from my area of expertise", "haven't done any DIY kits or anything) and materials engineering is probably the", "1200x1200 printer) that I'm only going to print in PLA and MAYBE ABS", "going to print in PLA and MAYBE ABS occasionally, can I substitute the", "I can tell) as it seems 400\\400 silicone heat pads tend to go", "seems 400\\*400 silicone heat pads tend to go for about 80 bucks a", "pretty good prints from my Wanhao di3 plus, but haven't done any DIY", "getting pretty good prints from my Wanhao di3 plus, but haven't done any", "to do this to try and reduce the cost (significantly as far as", "anything) and materials engineering is probably the furthest thing from my area of", "/relatively/ new to 3d printing (I'm getting pretty good prints from my Wanhao", "I'm building a large scale printer (probably a similar size to substation33 -", "pads tend to go for about 80 bucks a pop. An alternate idea", "new to 3d printing (I'm getting pretty good prints from my Wanhao di3", "substitute the heated bed for simply heating the entire enclosure? The idea would", "so I thought I would pose this to more experienced makers: If I'm", "and space them evenly under a glass bed, although I feel that this", "evenly under a glass bed, although I feel that this won't work as" ]
[ "is some kind of drooping because of the high ambient temps. The tearing", "not enough top layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\") Another guess is", "kind of tearing in my prints, I'm not sure if it's from too", "80 °C; * 5 % rectilinear infill; * 0.25 mm layer height; ", "°C; 5 % rectilinear infill; * 0.25 mm layer height; * 2", "tearing in my prints, I'm not sure if it's from too large of", "height; * 2 solid layers top and bottom; * Fan is completely disabled;", "When printing ABS, I place an aluminum foil lined cardboard box over my", "place an aluminum foil lined cardboard box over my printer to help keep", "never actually measured the temperature inside, but the cardboard box insulates very well.", "disabled; * 0.25 mm extrusion width; * 50 mm/s perimeter print speed; ", " Fan is completely disabled; * 0.25 mm extrusion width; * 50 mm/s", "cardboard box insulates very well. I get this weird kind of tearing in", "20 mm/s top solid and solid speed; * No acceleration. When printing ABS,", "60 mm/s infill speed; * 20 mm/s top solid and solid speed; ", "not sure if it's from too large of gaps in my infill, too", "speed; No acceleration. When printing ABS, I place an aluminum foil lined", "sure if it's from too large of gaps in my infill, too fast", "less warping and stronger prints. I've never actually measured the temperature inside, but", "enough top layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\") Another guess is some", "get this weird kind of tearing in my prints, I'm not sure if", "* with a bedtemp of 80 °C; * 5 % rectilinear infill; ", "0.25 mm extrusion width; 50 mm/s perimeter print speed; * 60 mm/s", "mm/s top solid and solid speed; * No acceleration. When printing ABS, I", "* 5 % rectilinear infill; * 0.25 mm layer height; * 2 solid", "acceleration. When printing ABS, I place an aluminum foil lined cardboard box over", "up for less warping and stronger prints. I've never actually measured the temperature", "well. I get this weird kind of tearing in my prints, I'm not", "but the cardboard box insulates very well. I get this weird kind of", "the cardboard box insulates very well. I get this weird kind of tearing", "of gaps in my infill, too fast print speeds, or not enough top", "240 °C; * with a bedtemp of 80 °C; * 5 % rectilinear", "I place an aluminum foil lined cardboard box over my printer to help", "in my prints, I'm not sure if it's from too large of gaps", "gaps in my infill, too fast print speeds, or not enough top layers.", "speed; * 20 mm/s top solid and solid speed; * No acceleration. When", "speed; * 60 mm/s infill speed; * 20 mm/s top solid and solid", "* 50 mm/s perimeter print speed; * 60 mm/s infill speed; * 20", "print speed; * 60 mm/s infill speed; * 20 mm/s top solid and", "help keep the ambient temps up for less warping and stronger prints. I've", "50 mm/s perimeter print speed; * 60 mm/s infill speed; * 20 mm/s", "and stronger prints. I've never actually measured the temperature inside, but the cardboard", "of the high ambient temps. The tearing only occurs on large top layer", "top and bottom; * Fan is completely disabled; * 0.25 mm extrusion width;", "some kind of drooping because of the high ambient temps. The tearing only", "and bottom; * Fan is completely disabled; * 0.25 mm extrusion width; ", "prints. I've never actually measured the temperature inside, but the cardboard box insulates", "print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\") Another guess is some kind of drooping because", "aluminum foil lined cardboard box over my printer to help keep the ambient", "too fast print speeds, or not enough top layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg", "and solid speed; No acceleration. When printing ABS, I place an aluminum", "insulates very well. I get this weird kind of tearing in my prints,", "mm/s infill speed; * 20 mm/s top solid and solid speed; * No", "over my printer to help keep the ambient temps up for less warping", "a bedtemp of 80 °C; * 5 % rectilinear infill; * 0.25 mm", "ABS, I place an aluminum foil lined cardboard box over my printer to", "measured the temperature inside, but the cardboard box insulates very well. I get", "I get this weird kind of tearing in my prints, I'm not sure", "layers top and bottom; * Fan is completely disabled; * 0.25 mm extrusion", "temps up for less warping and stronger prints. I've never actually measured the", "[![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\") Another guess is some kind of drooping", "°C; * with a bedtemp of 80 °C; * 5 % rectilinear infill;", "to help keep the ambient temps up for less warping and stronger prints.", "fast print speeds, or not enough top layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn", "box insulates very well. I get this weird kind of tearing in my", "in my infill, too fast print speeds, or not enough top layers. [![Torn", "infill, too fast print speeds, or not enough top layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn", "actually measured the temperature inside, but the cardboard box insulates very well. I", "bedtemp of 80 °C; * 5 % rectilinear infill; * 0.25 mm layer", "cardboard box over my printer to help keep the ambient temps up for", "foil lined cardboard box over my printer to help keep the ambient temps", "my infill, too fast print speeds, or not enough top layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg", "2 solid layers top and bottom; * Fan is completely disabled; * 0.25", "solid speed; * No acceleration. When printing ABS, I place an aluminum foil", "* 240 °C; * with a bedtemp of 80 °C; * 5 %", "mm layer height; * 2 solid layers top and bottom; * Fan is", "the ambient temps up for less warping and stronger prints. I've never actually", "* 0.25 mm layer height; * 2 solid layers top and bottom; ", "ABS at: 240 °C; * with a bedtemp of 80 °C; ", "large of gaps in my infill, too fast print speeds, or not enough", "it's from too large of gaps in my infill, too fast print speeds,", "top solid and solid speed; No acceleration. When printing ABS, I place", "% rectilinear infill; * 0.25 mm layer height; * 2 solid layers top", "No acceleration. When printing ABS, I place an aluminum foil lined cardboard box", "or not enough top layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\") Another guess", "kind of drooping because of the high ambient temps. The tearing only occurs", "weird kind of tearing in my prints, I'm not sure if it's from", "mm extrusion width; * 50 mm/s perimeter print speed; * 60 mm/s infill", "\"Torn print\") Another guess is some kind of drooping because of the high", "because of the high ambient temps. The tearing only occurs on large top", "an aluminum foil lined cardboard box over my printer to help keep the", "0.25 mm layer height; * 2 solid layers top and bottom; * Fan", "from too large of gaps in my infill, too fast print speeds, or", "width; * 50 mm/s perimeter print speed; * 60 mm/s infill speed; ", "this weird kind of tearing in my prints, I'm not sure if it's", "box over my printer to help keep the ambient temps up for less", "inside, but the cardboard box insulates very well. I get this weird kind", "is completely disabled; 0.25 mm extrusion width; * 50 mm/s perimeter print", "Another guess is some kind of drooping because of the high ambient temps.", "5 % rectilinear infill; * 0.25 mm layer height; * 2 solid layers", "for less warping and stronger prints. I've never actually measured the temperature inside,", "bottom; * Fan is completely disabled; * 0.25 mm extrusion width; * 50", "warping and stronger prints. I've never actually measured the temperature inside, but the", "* No acceleration. When printing ABS, I place an aluminum foil lined cardboard", "mm/s perimeter print speed; * 60 mm/s infill speed; * 20 mm/s top", "* 2 solid layers top and bottom; * Fan is completely disabled; ", "at: 240 °C; * with a bedtemp of 80 °C; * 5", "solid and solid speed; * No acceleration. When printing ABS, I place an", "prints, I'm not sure if it's from too large of gaps in my", "* 20 mm/s top solid and solid speed; * No acceleration. When printing", "very well. I get this weird kind of tearing in my prints, I'm", "I print my ABS at: * 240 °C; * with a bedtemp of", "Fan is completely disabled; * 0.25 mm extrusion width; * 50 mm/s perimeter", "drooping because of the high ambient temps. The tearing only occurs on large", "of tearing in my prints, I'm not sure if it's from too large", "of 80 °C; * 5 % rectilinear infill; * 0.25 mm layer height;", "layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\") Another guess is some kind of", "* 0.25 mm extrusion width; * 50 mm/s perimeter print speed; * 60", "of drooping because of the high ambient temps. The tearing only occurs on", "printing ABS, I place an aluminum foil lined cardboard box over my printer", "the temperature inside, but the cardboard box insulates very well. I get this", "I've never actually measured the temperature inside, but the cardboard box insulates very", "extrusion width; * 50 mm/s perimeter print speed; * 60 mm/s infill speed;", "layer height; * 2 solid layers top and bottom; * Fan is completely", "solid layers top and bottom; * Fan is completely disabled; * 0.25 mm", "keep the ambient temps up for less warping and stronger prints. I've never", "too large of gaps in my infill, too fast print speeds, or not", "top layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\") Another guess is some kind", "infill speed; * 20 mm/s top solid and solid speed; * No acceleration.", "my printer to help keep the ambient temps up for less warping and", "print\") Another guess is some kind of drooping because of the high ambient", "print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\") Another guess is some kind of drooping because of the", "rectilinear infill; * 0.25 mm layer height; * 2 solid layers top and", "completely disabled; * 0.25 mm extrusion width; * 50 mm/s perimeter print speed;", "stronger prints. I've never actually measured the temperature inside, but the cardboard box", "my prints, I'm not sure if it's from too large of gaps in", "printer to help keep the ambient temps up for less warping and stronger", "ambient temps up for less warping and stronger prints. I've never actually measured", "speeds, or not enough top layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\") Another", "\"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\") Another guess is some kind of drooping because of", "guess is some kind of drooping because of the high ambient temps. The", "print speeds, or not enough top layers. [![Torn print](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")](https://i.stack.imgur.com/r0Y27.jpg \"Torn print\")", "I'm not sure if it's from too large of gaps in my infill,", "* 60 mm/s infill speed; * 20 mm/s top solid and solid speed;", "if it's from too large of gaps in my infill, too fast print", "lined cardboard box over my printer to help keep the ambient temps up", "with a bedtemp of 80 °C; * 5 % rectilinear infill; * 0.25", "temperature inside, but the cardboard box insulates very well. I get this weird", "perimeter print speed; * 60 mm/s infill speed; * 20 mm/s top solid", "infill; * 0.25 mm layer height; * 2 solid layers top and bottom;", "the high ambient temps. The tearing only occurs on large top layer surfaces.", "print my ABS at: * 240 °C; * with a bedtemp of 80", "my ABS at: * 240 °C; * with a bedtemp of 80 °C;" ]
[ "unventilated garage, which is quite warm and humid during the summer in Texas.", "so I'm looking for accuracy and mechanical strength over speed and volume. I'm", "and volume. I'm also somewhat concerned about harmful emissions so would like a", "strength over speed and volume. I'm also somewhat concerned about harmful emissions so", "of filtration, whether it's built into the machine or something added. I'm thinking", "at several options but I didn't really come across any scenarios like I've", "volume. I'm also somewhat concerned about harmful emissions so would like a solution", "the summer in Texas. My price range is \\$1500-\\$2000 USD. I've looked at", "range is \\$1500-\\$2000 USD. I've looked at several options but I didn't really", "options but I didn't really come across any scenarios like I've described and", "across any scenarios like I've described and would like some advice from the", "speed and volume. I'm also somewhat concerned about harmful emissions so would like", "in an unventilated garage, which is quite warm and humid during the summer", "with some sort of filtration, whether it's built into the machine or something", "is quite warm and humid during the summer in Texas. My price range", "about harmful emissions so would like a solution with some sort of filtration,", "\\$1500-\\$2000 USD. I've looked at several options but I didn't really come across", "into the machine or something added. I'm thinking I will run the machine", "it's built into the machine or something added. I'm thinking I will run", "looking for accuracy and mechanical strength over speed and volume. I'm also somewhat", "printing small machine parts (gears, linkages, structural components) so I'm looking for accuracy", "interested in printing small machine parts (gears, linkages, structural components) so I'm looking", "small machine parts (gears, linkages, structural components) so I'm looking for accuracy and", "harmful emissions so would like a solution with some sort of filtration, whether", "during the summer in Texas. My price range is \\$1500-\\$2000 USD. I've looked", "scenarios like I've described and would like some advice from the experts before", "will run the machine in an unventilated garage, which is quite warm and", "warm and humid during the summer in Texas. My price range is \\$1500-\\$2000", "and mechanical strength over speed and volume. I'm also somewhat concerned about harmful", "looked at several options but I didn't really come across any scenarios like", "would like some advice from the experts before committing. Anyone in a similar", "mechanical strength over speed and volume. I'm also somewhat concerned about harmful emissions", "parts (gears, linkages, structural components) so I'm looking for accuracy and mechanical strength", "filtration, whether it's built into the machine or something added. I'm thinking I", "accuracy and mechanical strength over speed and volume. I'm also somewhat concerned about", "machine in an unventilated garage, which is quite warm and humid during the", "is \\$1500-\\$2000 USD. I've looked at several options but I didn't really come", "I'm thinking I will run the machine in an unventilated garage, which is", "like a solution with some sort of filtration, whether it's built into the", "really come across any scenarios like I've described and would like some advice", "whether it's built into the machine or something added. I'm thinking I will", "over speed and volume. I'm also somewhat concerned about harmful emissions so would", "built into the machine or something added. I'm thinking I will run the", "the machine or something added. I'm thinking I will run the machine in", "thinking I will run the machine in an unventilated garage, which is quite", "from the experts before committing. Anyone in a similar boat have any suggestions?", "would like a solution with some sort of filtration, whether it's built into", "I will run the machine in an unventilated garage, which is quite warm", "advice from the experts before committing. Anyone in a similar boat have any", "summer in Texas. My price range is \\$1500-\\$2000 USD. I've looked at several", "quite warm and humid during the summer in Texas. My price range is", "and humid during the summer in Texas. My price range is \\$1500-\\$2000 USD.", "which is quite warm and humid during the summer in Texas. My price", "in printing small machine parts (gears, linkages, structural components) so I'm looking for", "concerned about harmful emissions so would like a solution with some sort of", "solution with some sort of filtration, whether it's built into the machine or", "run the machine in an unventilated garage, which is quite warm and humid", "in Texas. My price range is \\$1500-\\$2000 USD. I've looked at several options", "I'm also somewhat concerned about harmful emissions so would like a solution with", "some advice from the experts before committing. Anyone in a similar boat have", "(gears, linkages, structural components) so I'm looking for accuracy and mechanical strength over", "like I've described and would like some advice from the experts before committing.", "USD. I've looked at several options but I didn't really come across any", "so would like a solution with some sort of filtration, whether it's built", "Texas. My price range is \\$1500-\\$2000 USD. I've looked at several options but", "like some advice from the experts before committing. Anyone in a similar boat", "I've described and would like some advice from the experts before committing. Anyone", "several options but I didn't really come across any scenarios like I've described", "humid during the summer in Texas. My price range is \\$1500-\\$2000 USD. I've", "price range is \\$1500-\\$2000 USD. I've looked at several options but I didn't", "somewhat concerned about harmful emissions so would like a solution with some sort", "garage, which is quite warm and humid during the summer in Texas. My", "something added. I'm thinking I will run the machine in an unventilated garage,", "emissions so would like a solution with some sort of filtration, whether it's", "or something added. I'm thinking I will run the machine in an unventilated", "structural components) so I'm looking for accuracy and mechanical strength over speed and", "I didn't really come across any scenarios like I've described and would like", "machine parts (gears, linkages, structural components) so I'm looking for accuracy and mechanical", "My price range is \\$1500-\\$2000 USD. I've looked at several options but I", "an unventilated garage, which is quite warm and humid during the summer in", "didn't really come across any scenarios like I've described and would like some", "a solution with some sort of filtration, whether it's built into the machine", "sort of filtration, whether it's built into the machine or something added. I'm", "and would like some advice from the experts before committing. Anyone in a", "machine or something added. I'm thinking I will run the machine in an", "also somewhat concerned about harmful emissions so would like a solution with some", "but I didn't really come across any scenarios like I've described and would", "any scenarios like I've described and would like some advice from the experts", "the machine in an unventilated garage, which is quite warm and humid during", "I'm looking for accuracy and mechanical strength over speed and volume. I'm also", "components) so I'm looking for accuracy and mechanical strength over speed and volume.", "some sort of filtration, whether it's built into the machine or something added.", "I'm interested in printing small machine parts (gears, linkages, structural components) so I'm", "added. I'm thinking I will run the machine in an unventilated garage, which", "described and would like some advice from the experts before committing. Anyone in", "for accuracy and mechanical strength over speed and volume. I'm also somewhat concerned", "linkages, structural components) so I'm looking for accuracy and mechanical strength over speed", "I've looked at several options but I didn't really come across any scenarios", "come across any scenarios like I've described and would like some advice from" ]
[ "minutes to cure a mold. Once the mold is cured, it is impervious", "is \"cured\" in the vulcanizer that is then used over and over to", "one would want. The vulcanizer heats up to 300 to 320 °F, and", "acid etch the magnesium plate (11 pt depth is desired) and that metal", "to 15 minutes to cure a mold. Once the mold is cured, it", "is cured, it is impervious to the heat used in the vulcanizer, and", "board to heat up before the high pressure is obtained, I'm just curious", "to cure a mold. Once the mold is cured, it is impervious to", "be 2 or 3 degree shoulder angle added to the file configuration, or", "plate is then used with uncured matrix boards (a bakelight type material) that", "mold is cured, it is impervious to the heat used in the vulcanizer,", "is obtained, I'm just curious if any other stamp makers have had success", "that metal plate is then used with uncured matrix boards (a bakelight type", "used in the vulcanizer, and the heat is used to cure the unvulcanized", "this method and/or have any suggestions about STL files for this type of", "make as many images of the rubber stamps as one would want. The", "rubber stamps as one would want. The vulcanizer heats up to 300 to", "of PLA and ABS, the 200 °C equates to around 460 °F, so", "I am an art rubber stamp maker, using a vulcanizer to make art", "for 10 to 15 minutes to cure a mold. Once the mold is", "and one usually uses 2000 to 2500 p.s.i. of pressure for 10 to", "vulcanizer to make art rubber stamps from molds that are usually created with", "pressure isn't applied all at once, one usually allows the uncured matrix board", "suggestions about STL files for this type of printing, if there needs to", "of pressure for 10 to 15 minutes to cure a mold. Once the", "have any suggestions about STL files for this type of printing, if there", "the unvulcanized rubber (again, 300 or so degrees, 2000 psi, or so, for", "there doesn't seem like the heat of the vulcanizer will be an issue,", "to make as many images of the rubber stamps as one would want.", "and the heat is used to cure the unvulcanized rubber (again, 300 or", "like the heat of the vulcanizer will be an issue, and the pressure", "psi, or so, for 8 to 10 minutes. In reading up about the", "heat is used to cure the unvulcanized rubber (again, 300 or so degrees,", "the high pressure is obtained, I'm just curious if any other stamp makers", "3 degree shoulder angle added to the file configuration, or any other suggestions.", "success with this method and/or have any suggestions about STL files for this", "2500 p.s.i. of pressure for 10 to 15 minutes to cure a mold.", "high pressure is obtained, I'm just curious if any other stamp makers have", "heats up to 300 to 320 °F, and one usually uses 2000 to", "points of PLA and ABS, the 200 °C equates to around 460 °F,", "The normal process is to send artwork off to an engraving firm to", "10 to 15 minutes to cure a mold. Once the mold is cured,", "so there doesn't seem like the heat of the vulcanizer will be an", "I'm just curious if any other stamp makers have had success with this", "with a magnesium plate. The normal process is to send artwork off to", "doesn't seem like the heat of the vulcanizer will be an issue, and", "°F, and one usually uses 2000 to 2500 p.s.i. of pressure for 10", "type material) that is \"cured\" in the vulcanizer that is then used over", "300 or so degrees, 2000 psi, or so, for 8 to 10 minutes.", "unvulcanized rubber (again, 300 or so degrees, 2000 psi, or so, for 8", "cured, it is impervious to the heat used in the vulcanizer, and the", "process is to send artwork off to an engraving firm to acid etch", "any suggestions about STL files for this type of printing, if there needs", "matrix boards (a bakelight type material) that is \"cured\" in the vulcanizer that", "etch the magnesium plate (11 pt depth is desired) and that metal plate", "art rubber stamp maker, using a vulcanizer to make art rubber stamps from", "a vulcanizer to make art rubber stamps from molds that are usually created", "minutes. In reading up about the melting points of PLA and ABS, the", "reading up about the melting points of PLA and ABS, the 200 °C", "PLA and ABS, the 200 °C equates to around 460 °F, so there", "applied all at once, one usually allows the uncured matrix board to heat", "the melting points of PLA and ABS, the 200 °C equates to around", "stamp makers have had success with this method and/or have any suggestions about", "of the rubber stamps as one would want. The vulcanizer heats up to", "uncured matrix board to heat up before the high pressure is obtained, I'm", "have had success with this method and/or have any suggestions about STL files", "and over to make as many images of the rubber stamps as one", "metal plate is then used with uncured matrix boards (a bakelight type material)", "and that metal plate is then used with uncured matrix boards (a bakelight", "one usually uses 2000 to 2500 p.s.i. of pressure for 10 to 15", "(11 pt depth is desired) and that metal plate is then used with", "molds that are usually created with a magnesium plate. The normal process is", "uses 2000 to 2500 p.s.i. of pressure for 10 to 15 minutes to", "up to 300 to 320 °F, and one usually uses 2000 to 2500", "of the vulcanizer will be an issue, and the pressure isn't applied all", "it is impervious to the heat used in the vulcanizer, and the heat", "mold. Once the mold is cured, it is impervious to the heat used", "to 300 to 320 °F, and one usually uses 2000 to 2500 p.s.i.", "8 to 10 minutes. In reading up about the melting points of PLA", "°F, so there doesn't seem like the heat of the vulcanizer will be", "to 10 minutes. In reading up about the melting points of PLA and", "rubber (again, 300 or so degrees, 2000 psi, or so, for 8 to", "isn't applied all at once, one usually allows the uncured matrix board to", "an engraving firm to acid etch the magnesium plate (11 pt depth is", "to send artwork off to an engraving firm to acid etch the magnesium", "300 to 320 °F, and one usually uses 2000 to 2500 p.s.i. of", "printing, if there needs to be 2 or 3 degree shoulder angle added", "pt depth is desired) and that metal plate is then used with uncured", "stamp maker, using a vulcanizer to make art rubber stamps from molds that", "boards (a bakelight type material) that is \"cured\" in the vulcanizer that is", "to acid etch the magnesium plate (11 pt depth is desired) and that", "bakelight type material) that is \"cured\" in the vulcanizer that is then used", "that is \"cured\" in the vulcanizer that is then used over and over", "files for this type of printing, if there needs to be 2 or", "pressure is obtained, I'm just curious if any other stamp makers have had", "200 °C equates to around 460 °F, so there doesn't seem like the", "matrix board to heat up before the high pressure is obtained, I'm just", "engraving firm to acid etch the magnesium plate (11 pt depth is desired)", "or 3 degree shoulder angle added to the file configuration, or any other", "used with uncured matrix boards (a bakelight type material) that is \"cured\" in", "ABS, the 200 °C equates to around 460 °F, so there doesn't seem", "as one would want. The vulcanizer heats up to 300 to 320 °F,", "p.s.i. of pressure for 10 to 15 minutes to cure a mold. Once", "so degrees, 2000 psi, or so, for 8 to 10 minutes. In reading", "around 460 °F, so there doesn't seem like the heat of the vulcanizer", "from molds that are usually created with a magnesium plate. The normal process", "to 320 °F, and one usually uses 2000 to 2500 p.s.i. of pressure", "the heat used in the vulcanizer, and the heat is used to cure", "to make art rubber stamps from molds that are usually created with a", "using a vulcanizer to make art rubber stamps from molds that are usually", "15 minutes to cure a mold. Once the mold is cured, it is", "there needs to be 2 or 3 degree shoulder angle added to the", "make art rubber stamps from molds that are usually created with a magnesium", "In reading up about the melting points of PLA and ABS, the 200", "°C equates to around 460 °F, so there doesn't seem like the heat", "the magnesium plate (11 pt depth is desired) and that metal plate is", "cure a mold. Once the mold is cured, it is impervious to the", "type of printing, if there needs to be 2 or 3 degree shoulder", "with this method and/or have any suggestions about STL files for this type", "about the melting points of PLA and ABS, the 200 °C equates to", "for 8 to 10 minutes. In reading up about the melting points of", "to be 2 or 3 degree shoulder angle added to the file configuration,", "the pressure isn't applied all at once, one usually allows the uncured matrix", "the heat is used to cure the unvulcanized rubber (again, 300 or so", "usually created with a magnesium plate. The normal process is to send artwork", "want. The vulcanizer heats up to 300 to 320 °F, and one usually", "to around 460 °F, so there doesn't seem like the heat of the", "all at once, one usually allows the uncured matrix board to heat up", "if any other stamp makers have had success with this method and/or have", "(a bakelight type material) that is \"cured\" in the vulcanizer that is then", "a magnesium plate. The normal process is to send artwork off to an", "the vulcanizer, and the heat is used to cure the unvulcanized rubber (again,", "or so degrees, 2000 psi, or so, for 8 to 10 minutes. In", "used over and over to make as many images of the rubber stamps", "curious if any other stamp makers have had success with this method and/or", "in the vulcanizer that is then used over and over to make as", "heat used in the vulcanizer, and the heat is used to cure the", "up about the melting points of PLA and ABS, the 200 °C equates", "is impervious to the heat used in the vulcanizer, and the heat is", "about STL files for this type of printing, if there needs to be", "STL files for this type of printing, if there needs to be 2", "to an engraving firm to acid etch the magnesium plate (11 pt depth", "the heat of the vulcanizer will be an issue, and the pressure isn't", "a mold. Once the mold is cured, it is impervious to the heat", "is used to cure the unvulcanized rubber (again, 300 or so degrees, 2000", "any other stamp makers have had success with this method and/or have any", "in the vulcanizer, and the heat is used to cure the unvulcanized rubber", "at once, one usually allows the uncured matrix board to heat up before", "the uncured matrix board to heat up before the high pressure is obtained,", "created with a magnesium plate. The normal process is to send artwork off", "usually allows the uncured matrix board to heat up before the high pressure", "many images of the rubber stamps as one would want. The vulcanizer heats", "then used over and over to make as many images of the rubber", "artwork off to an engraving firm to acid etch the magnesium plate (11", "up before the high pressure is obtained, I'm just curious if any other", "melting points of PLA and ABS, the 200 °C equates to around 460", "rubber stamp maker, using a vulcanizer to make art rubber stamps from molds", "obtained, I'm just curious if any other stamp makers have had success with", "firm to acid etch the magnesium plate (11 pt depth is desired) and", "to the heat used in the vulcanizer, and the heat is used to", "heat up before the high pressure is obtained, I'm just curious if any", "is then used with uncured matrix boards (a bakelight type material) that is", "maker, using a vulcanizer to make art rubber stamps from molds that are", "magnesium plate. The normal process is to send artwork off to an engraving", "the vulcanizer that is then used over and over to make as many", "an art rubber stamp maker, using a vulcanizer to make art rubber stamps", "and the pressure isn't applied all at once, one usually allows the uncured", "seem like the heat of the vulcanizer will be an issue, and the", "if there needs to be 2 or 3 degree shoulder angle added to", "rubber stamps from molds that are usually created with a magnesium plate. The", "magnesium plate (11 pt depth is desired) and that metal plate is then", "2000 psi, or so, for 8 to 10 minutes. In reading up about", "over to make as many images of the rubber stamps as one would", "so, for 8 to 10 minutes. In reading up about the melting points", "10 minutes. In reading up about the melting points of PLA and ABS,", "that are usually created with a magnesium plate. The normal process is to", "this type of printing, if there needs to be 2 or 3 degree", "vulcanizer will be an issue, and the pressure isn't applied all at once,", "and ABS, the 200 °C equates to around 460 °F, so there doesn't", "would want. The vulcanizer heats up to 300 to 320 °F, and one", "2 or 3 degree shoulder angle added to the file configuration, or any", "desired) and that metal plate is then used with uncured matrix boards (a", "as many images of the rubber stamps as one would want. The vulcanizer", "uncured matrix boards (a bakelight type material) that is \"cured\" in the vulcanizer", "allows the uncured matrix board to heat up before the high pressure is", "just curious if any other stamp makers have had success with this method", "other stamp makers have had success with this method and/or have any suggestions", "used to cure the unvulcanized rubber (again, 300 or so degrees, 2000 psi,", "to cure the unvulcanized rubber (again, 300 or so degrees, 2000 psi, or", "for this type of printing, if there needs to be 2 or 3", "art rubber stamps from molds that are usually created with a magnesium plate.", "images of the rubber stamps as one would want. The vulcanizer heats up", "and/or have any suggestions about STL files for this type of printing, if", "the vulcanizer will be an issue, and the pressure isn't applied all at", "send artwork off to an engraving firm to acid etch the magnesium plate", "The vulcanizer heats up to 300 to 320 °F, and one usually uses", "the 200 °C equates to around 460 °F, so there doesn't seem like", "method and/or have any suggestions about STL files for this type of printing,", "stamps from molds that are usually created with a magnesium plate. The normal", "is then used over and over to make as many images of the", "vulcanizer, and the heat is used to cure the unvulcanized rubber (again, 300", "degrees, 2000 psi, or so, for 8 to 10 minutes. In reading up", "plate. The normal process is to send artwork off to an engraving firm", "depth is desired) and that metal plate is then used with uncured matrix", "had success with this method and/or have any suggestions about STL files for", "of printing, if there needs to be 2 or 3 degree shoulder angle", "material) that is \"cured\" in the vulcanizer that is then used over and", "or so, for 8 to 10 minutes. In reading up about the melting", "Once the mold is cured, it is impervious to the heat used in", "320 °F, and one usually uses 2000 to 2500 p.s.i. of pressure for", "is desired) and that metal plate is then used with uncured matrix boards", "one usually allows the uncured matrix board to heat up before the high", "(again, 300 or so degrees, 2000 psi, or so, for 8 to 10", "equates to around 460 °F, so there doesn't seem like the heat of", "be an issue, and the pressure isn't applied all at once, one usually", "vulcanizer heats up to 300 to 320 °F, and one usually uses 2000", "is to send artwork off to an engraving firm to acid etch the", "usually uses 2000 to 2500 p.s.i. of pressure for 10 to 15 minutes", "the rubber stamps as one would want. The vulcanizer heats up to 300", "over and over to make as many images of the rubber stamps as", "am an art rubber stamp maker, using a vulcanizer to make art rubber", "stamps as one would want. The vulcanizer heats up to 300 to 320", "plate (11 pt depth is desired) and that metal plate is then used", "impervious to the heat used in the vulcanizer, and the heat is used", "cure the unvulcanized rubber (again, 300 or so degrees, 2000 psi, or so,", "to 2500 p.s.i. of pressure for 10 to 15 minutes to cure a", "460 °F, so there doesn't seem like the heat of the vulcanizer will", "will be an issue, and the pressure isn't applied all at once, one", "the mold is cured, it is impervious to the heat used in the", "an issue, and the pressure isn't applied all at once, one usually allows", "issue, and the pressure isn't applied all at once, one usually allows the", "heat of the vulcanizer will be an issue, and the pressure isn't applied", "\"cured\" in the vulcanizer that is then used over and over to make", "vulcanizer that is then used over and over to make as many images", "off to an engraving firm to acid etch the magnesium plate (11 pt", "to heat up before the high pressure is obtained, I'm just curious if", "before the high pressure is obtained, I'm just curious if any other stamp", "once, one usually allows the uncured matrix board to heat up before the", "needs to be 2 or 3 degree shoulder angle added to the file", "then used with uncured matrix boards (a bakelight type material) that is \"cured\"", "makers have had success with this method and/or have any suggestions about STL", "are usually created with a magnesium plate. The normal process is to send", "with uncured matrix boards (a bakelight type material) that is \"cured\" in the", "pressure for 10 to 15 minutes to cure a mold. Once the mold", "that is then used over and over to make as many images of", "2000 to 2500 p.s.i. of pressure for 10 to 15 minutes to cure", "normal process is to send artwork off to an engraving firm to acid" ]
[ "fuse that had turned bad or there was some kind of short in", "With the power switched on, none of my appliances drew any current. However,", "any current. However, the RAMPS board drew about 0.16 amps. Is that normal?", "found that the extruder had stopped heating, and the motors had stopped running.", "does it mean that my fuse needs replacement? Because none of my loads", "hot. I wanted to verify whether it was my fuse that had turned", "bad or there was some kind of short in my circuitry. With the", "wanted to verify whether it was my fuse that had turned bad or", "extremely hot. I wanted to verify whether it was my fuse that had", "that normal? If that is normal, does it mean that my fuse needs", "amps. Is that normal? If that is normal, does it mean that my", "checked the code, and nothing was wrong. My 5A fuse though, was extremely", "verify whether it was my fuse that had turned bad or there was", "RAMPS board drew about 0.16 amps. Is that normal? If that is normal,", "and nothing was wrong. My 5A fuse though, was extremely hot. I wanted", "about 0.16 amps. Is that normal? If that is normal, does it mean", "my fuse needs replacement? Because none of my loads seemed to draw unnecessary", "I checked the code, and nothing was wrong. My 5A fuse though, was", "few prints, and i found that the extruder had stopped heating, and the", "though, was extremely hot. I wanted to verify whether it was my fuse", "stopped printing during a few prints, and i found that the extruder had", "motors had stopped running. I checked the code, and nothing was wrong. My", "drew about 0.16 amps. Is that normal? If that is normal, does it", "My printer stopped printing during a few prints, and i found that the", "of short in my circuitry. With the power switched on, none of my", "that had turned bad or there was some kind of short in my", "my fuse that had turned bad or there was some kind of short", "of my appliances drew any current. However, the RAMPS board drew about 0.16", "I wanted to verify whether it was my fuse that had turned bad", "If that is normal, does it mean that my fuse needs replacement? Because", "it was my fuse that had turned bad or there was some kind", "my appliances drew any current. However, the RAMPS board drew about 0.16 amps.", "drew any current. However, the RAMPS board drew about 0.16 amps. Is that", "or there was some kind of short in my circuitry. With the power", "that the extruder had stopped heating, and the motors had stopped running. I", "the RAMPS board drew about 0.16 amps. Is that normal? If that is", "circuitry. With the power switched on, none of my appliances drew any current.", "power switched on, none of my appliances drew any current. However, the RAMPS", "a few prints, and i found that the extruder had stopped heating, and", "appliances drew any current. However, the RAMPS board drew about 0.16 amps. Is", "heating, and the motors had stopped running. I checked the code, and nothing", "5A fuse though, was extremely hot. I wanted to verify whether it was", "However, the RAMPS board drew about 0.16 amps. Is that normal? If that", "mean that my fuse needs replacement? Because none of my loads seemed to", "Is that normal? If that is normal, does it mean that my fuse", "had stopped running. I checked the code, and nothing was wrong. My 5A", "printer stopped printing during a few prints, and i found that the extruder", "kind of short in my circuitry. With the power switched on, none of", "on, none of my appliances drew any current. However, the RAMPS board drew", "needs replacement? Because none of my loads seemed to draw unnecessary current. Thanks", "during a few prints, and i found that the extruder had stopped heating,", "was my fuse that had turned bad or there was some kind of", "that is normal, does it mean that my fuse needs replacement? Because none", "the motors had stopped running. I checked the code, and nothing was wrong.", "running. I checked the code, and nothing was wrong. My 5A fuse though,", "was wrong. My 5A fuse though, was extremely hot. I wanted to verify", "code, and nothing was wrong. My 5A fuse though, was extremely hot. I", "whether it was my fuse that had turned bad or there was some", "there was some kind of short in my circuitry. With the power switched", "fuse though, was extremely hot. I wanted to verify whether it was my", "the power switched on, none of my appliances drew any current. However, the", "had turned bad or there was some kind of short in my circuitry.", "none of my appliances drew any current. However, the RAMPS board drew about", "in my circuitry. With the power switched on, none of my appliances drew", "turned bad or there was some kind of short in my circuitry. With", "stopped running. I checked the code, and nothing was wrong. My 5A fuse", "had stopped heating, and the motors had stopped running. I checked the code,", "normal, does it mean that my fuse needs replacement? Because none of my", "extruder had stopped heating, and the motors had stopped running. I checked the", "current. However, the RAMPS board drew about 0.16 amps. Is that normal? If", "to verify whether it was my fuse that had turned bad or there", "is normal, does it mean that my fuse needs replacement? Because none of", "replacement? Because none of my loads seemed to draw unnecessary current. Thanks in", "it mean that my fuse needs replacement? Because none of my loads seemed", "nothing was wrong. My 5A fuse though, was extremely hot. I wanted to", "Because none of my loads seemed to draw unnecessary current. Thanks in advance.", "stopped heating, and the motors had stopped running. I checked the code, and", "prints, and i found that the extruder had stopped heating, and the motors", "printing during a few prints, and i found that the extruder had stopped", "was some kind of short in my circuitry. With the power switched on,", "switched on, none of my appliances drew any current. However, the RAMPS board", "0.16 amps. Is that normal? If that is normal, does it mean that", "normal? If that is normal, does it mean that my fuse needs replacement?", "fuse needs replacement? Because none of my loads seemed to draw unnecessary current.", "the code, and nothing was wrong. My 5A fuse though, was extremely hot.", "some kind of short in my circuitry. With the power switched on, none", "that my fuse needs replacement? Because none of my loads seemed to draw", "i found that the extruder had stopped heating, and the motors had stopped", "short in my circuitry. With the power switched on, none of my appliances", "and i found that the extruder had stopped heating, and the motors had", "wrong. My 5A fuse though, was extremely hot. I wanted to verify whether", "the extruder had stopped heating, and the motors had stopped running. I checked", "My 5A fuse though, was extremely hot. I wanted to verify whether it", "and the motors had stopped running. I checked the code, and nothing was", "my circuitry. With the power switched on, none of my appliances drew any", "was extremely hot. I wanted to verify whether it was my fuse that", "board drew about 0.16 amps. Is that normal? If that is normal, does" ]
[ "it leaked when making it in PLA... What are the key points to", "keep in mind when designing and printing an object that is intended to", "in mind when designing and printing an object that is intended to hold", "the key points to keep in mind when designing and printing an object", "designing and printing an object that is intended to hold water using an", "and printing an object that is intended to hold water using an FDM", "PLA... What are the key points to keep in mind when designing and", "points to keep in mind when designing and printing an object that is", "a tea bowl, but it leaked when making it in PLA... What are", "What are the key points to keep in mind when designing and printing", "in PLA... What are the key points to keep in mind when designing", "I made a tea bowl, but it leaked when making it in PLA...", "but it leaked when making it in PLA... What are the key points", "are the key points to keep in mind when designing and printing an", "key points to keep in mind when designing and printing an object that", "tea bowl, but it leaked when making it in PLA... What are the", "when making it in PLA... What are the key points to keep in", "bowl, but it leaked when making it in PLA... What are the key", "to keep in mind when designing and printing an object that is intended", "mind when designing and printing an object that is intended to hold water", "made a tea bowl, but it leaked when making it in PLA... What", "it in PLA... What are the key points to keep in mind when", "when designing and printing an object that is intended to hold water using", "printing an object that is intended to hold water using an FDM printer?", "making it in PLA... What are the key points to keep in mind", "leaked when making it in PLA... What are the key points to keep" ]
[ "the simplest terms please what is the difference between a point cloud and", "terms please what is the difference between a point cloud and a voxel", "anyone explain in the simplest terms please what is the difference between a", "simplest terms please what is the difference between a point cloud and a", "explain in the simplest terms please what is the difference between a point", "please what is the difference between a point cloud and a voxel mesh?", "in the simplest terms please what is the difference between a point cloud", "can anyone explain in the simplest terms please what is the difference between" ]
[ "printer with no support documentation. How do I determine what firmware is in", "have a generic printer with no support documentation. How do I determine what", "determine what firmware is in use so that I can research how to", "with no support documentation. How do I determine what firmware is in use", "generic printer with no support documentation. How do I determine what firmware is", "I determine what firmware is in use so that I can research how", "support documentation. How do I determine what firmware is in use so that", "I have a generic printer with no support documentation. How do I determine", "a generic printer with no support documentation. How do I determine what firmware", "How do I determine what firmware is in use so that I can", "do I determine what firmware is in use so that I can research", "documentation. How do I determine what firmware is in use so that I", "no support documentation. How do I determine what firmware is in use so", "firmware is in use so that I can research how to make the", "in use so that I can research how to make the print run?", "is in use so that I can research how to make the print", "what firmware is in use so that I can research how to make" ]
[ "printed with these settings before, and it turned out just fine. If you", "and it turned out just fine. If you need any other info to", "these settings before, and it turned out just fine. If you need any", "with these settings before, and it turned out just fine. If you need", "well. What could be causing this? I've printed with these settings before, and", "causing this? I've printed with these settings before, and it turned out just", "properly diagnose this, let me know. I'm using a Robo3D R1+ [![Bad Print[1]](https://i.stack.imgur.com/cT7dV.jpg)", "out just fine. If you need any other info to properly diagnose this,", "the plastic down very well. What could be causing this? I've printed with", "this printing where it's not laying the plastic down very well. What could", "very well. What could be causing this? I've printed with these settings before,", "this? I've printed with these settings before, and it turned out just fine.", "fine. If you need any other info to properly diagnose this, let me", "be causing this? I've printed with these settings before, and it turned out", "where it's not laying the plastic down very well. What could be causing", "you need any other info to properly diagnose this, let me know. I'm", "other info to properly diagnose this, let me know. I'm using a Robo3D", "I'm getting this printing where it's not laying the plastic down very well.", "any other info to properly diagnose this, let me know. I'm using a", "to properly diagnose this, let me know. I'm using a Robo3D R1+ [![Bad", "it turned out just fine. If you need any other info to properly", "down very well. What could be causing this? I've printed with these settings", "just fine. If you need any other info to properly diagnose this, let", "getting this printing where it's not laying the plastic down very well. What", "plastic down very well. What could be causing this? I've printed with these", "before, and it turned out just fine. If you need any other info", "I've printed with these settings before, and it turned out just fine. If", "not laying the plastic down very well. What could be causing this? I've", "laying the plastic down very well. What could be causing this? I've printed", "printing where it's not laying the plastic down very well. What could be", "settings before, and it turned out just fine. If you need any other", "What could be causing this? I've printed with these settings before, and it", "If you need any other info to properly diagnose this, let me know.", "need any other info to properly diagnose this, let me know. I'm using", "turned out just fine. If you need any other info to properly diagnose", "info to properly diagnose this, let me know. I'm using a Robo3D R1+", "could be causing this? I've printed with these settings before, and it turned", "it's not laying the plastic down very well. What could be causing this?" ]
[ "corals have pores (tiny holes). Can anybody please help to add pores to", "[![3D printed coral is lacking pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs", "coral is lacking pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny", "scanning and printing to duplicate live corals. Please see attached photos, left is", "duplicate live corals. Please see attached photos, left is 3D printed model, right", "(tiny holes). Can anybody please help to add pores to the 3D printed", "holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny holes)\") [![3D printed coral is", "We manufacture artificial corals for aquarium decorations. We are trying to use 3D", "3D printed model, right is coral molded using resin. The problem is lacking", "Blender 3D software? [![3D printed coral (left) vs resin molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D", "The problem is lacking detail, the real corals have pores (tiny holes). Can", "aquarium decorations. We are trying to use 3D scanning and printing to duplicate", "corals for aquarium decorations. We are trying to use 3D scanning and printing", "please help to add pores to the 3D printed corals? Maybe using Blender", "is 3D printed model, right is coral molded using resin. The problem is", "(tiny holes)\") [![3D printed coral is lacking pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral", "real corals have pores (tiny holes). Can anybody please help to add pores", "coral (left) vs resin molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores", "printed corals? Maybe using Blender 3D software? [![3D printed coral (left) vs resin", "coral molded using resin. The problem is lacking detail, the real corals have", "pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D", "problem is lacking detail, the real corals have pores (tiny holes). Can anybody", "printed coral is lacking pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores", "Please see attached photos, left is 3D printed model, right is coral molded", "(left) vs resin molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin molded", "artificial corals for aquarium decorations. We are trying to use 3D scanning and", "molded using resin. The problem is lacking detail, the real corals have pores", "lacking detail, the real corals have pores (tiny holes). Can anybody please help", "Can anybody please help to add pores to the 3D printed corals? Maybe", "printed coral is lacking pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin", "holes). Can anybody please help to add pores to the 3D printed corals?", "live corals. Please see attached photos, left is 3D printed model, right is", "We are trying to use 3D scanning and printing to duplicate live corals.", "resin. The problem is lacking detail, the real corals have pores (tiny holes).", "is coral molded using resin. The problem is lacking detail, the real corals", "detail, the real corals have pores (tiny holes). Can anybody please help to", "is lacking pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny holes)\")", "holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral", "3D software? [![3D printed coral (left) vs resin molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed", "holes)\") [![3D printed coral is lacking pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left)", "corals. Please see attached photos, left is 3D printed model, right is coral", "(tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny holes)\") [![3D printed coral", "pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny holes)\") [![3D printed", "anybody please help to add pores to the 3D printed corals? Maybe using", "see attached photos, left is 3D printed model, right is coral molded using", "right is coral molded using resin. The problem is lacking detail, the real", "(tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D printed", "is lacking detail, the real corals have pores (tiny holes). Can anybody please", "corals? Maybe using Blender 3D software? [![3D printed coral (left) vs resin molded", "printed coral is lacking pores (tiny holes)\") [![3D printed coral is lacking pores", "help to add pores to the 3D printed corals? Maybe using Blender 3D", "printing to duplicate live corals. Please see attached photos, left is 3D printed", "to the 3D printed corals? Maybe using Blender 3D software? [![3D printed coral", "model, right is coral molded using resin. The problem is lacking detail, the", "(left) vs resin molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny", "decorations. We are trying to use 3D scanning and printing to duplicate live", "coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral", "resin molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin molded coral (right)\")", "\"3D printed coral is lacking pores (tiny holes)\") [![3D printed coral is lacking", "pores to the 3D printed corals? Maybe using Blender 3D software? [![3D printed", "[![3D printed coral (left) vs resin molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is", "coral (left) vs resin molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin", "vs resin molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg", "software? [![3D printed coral (left) vs resin molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral", "pores (tiny holes). Can anybody please help to add pores to the 3D", "lacking pores (tiny holes)\") [![3D printed coral is lacking pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D", "Maybe using Blender 3D software? [![3D printed coral (left) vs resin molded coral", "trying to use 3D scanning and printing to duplicate live corals. Please see", "for aquarium decorations. We are trying to use 3D scanning and printing to", "coral is lacking pores (tiny holes)\") [![3D printed coral is lacking pores (tiny", "using Blender 3D software? [![3D printed coral (left) vs resin molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg", "add pores to the 3D printed corals? Maybe using Blender 3D software? [![3D", "manufacture artificial corals for aquarium decorations. We are trying to use 3D scanning", "3D printed corals? Maybe using Blender 3D software? [![3D printed coral (left) vs", "coral is lacking pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin molded", "lacking pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg", "is lacking pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin molded coral", "photos, left is 3D printed model, right is coral molded using resin. The", "vs resin molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs resin molded coral", "attached photos, left is 3D printed model, right is coral molded using resin.", "printed coral (left) vs resin molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking", "lacking pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny holes)\") [![3D", "\"3D printed coral is lacking pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking", "using resin. The problem is lacking detail, the real corals have pores (tiny", "\"3D printed coral (left) vs resin molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left)", "molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed", "are trying to use 3D scanning and printing to duplicate live corals. Please", "the 3D printed corals? Maybe using Blender 3D software? [![3D printed coral (left)", "(right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is", "pores (tiny holes)\") [![3D printed coral is lacking pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg \"3D printed", "left is 3D printed model, right is coral molded using resin. The problem", "printed coral (left) vs resin molded coral (right)\")](https://i.stack.imgur.com/RxHVE.jpg \"3D printed coral (left) vs", "resin molded coral (right)](https://i.stack.imgur.com/6o2mq.jpg \"3D printed coral is lacking pores (tiny holes)\")](https://i.stack.imgur.com/6o2mq.jpg \"3D", "3D scanning and printing to duplicate live corals. Please see attached photos, left", "to add pores to the 3D printed corals? Maybe using Blender 3D software?", "and printing to duplicate live corals. Please see attached photos, left is 3D", "use 3D scanning and printing to duplicate live corals. Please see attached photos,", "printed model, right is coral molded using resin. The problem is lacking detail,", "the real corals have pores (tiny holes). Can anybody please help to add", "is lacking pores (tiny holes)\") [![3D printed coral is lacking pores (tiny holes)](https://i.stack.imgur.com/RxHVE.jpg", "have pores (tiny holes). Can anybody please help to add pores to the", "to use 3D scanning and printing to duplicate live corals. Please see attached", "to duplicate live corals. Please see attached photos, left is 3D printed model," ]
[ "the bed). I ordered some new end stop switches to try on my", "no problem, but Z will not move, there is no noise from the", "a test g code for movement. The problem is now the Z axis", "but Z will not move, there is no noise from the steppers. Also", "will not move, there is no noise from the steppers. Also unusual is", "new end stop switches to try on my Z axis....any thoughts? I'll update", "now the Z axis wont move anymore. First i checked for physical issues", "i checked for physical issues such as binding or nuts coming out of", "x & y no problem, but Z will not move, there is no", "The problem is now the Z axis wont move anymore. First i checked", "Pronterface i can move x & y no problem, but Z will not", "is now the Z axis wont move anymore. First i checked for physical", "resting on its own in a spot (the hotend is about 2mm off", "no noise from the steppers. Also unusual is the the Z axis is", "about 2mm off the bed). I ordered some new end stop switches to", "endstop, its resting on its own in a spot (the hotend is about", "Z will not move, there is no noise from the steppers. Also unusual", "move x & y no problem, but Z will not move, there is", "move anymore. First i checked for physical issues such as binding or nuts", "fine, it even ran a test g code for movement. The problem is", "building. Initially when i first homed it, it ran fine, it even ran", "8\" i just finished building. Initially when i first homed it, it ran", "code for movement. The problem is now the Z axis wont move anymore.", "ran fine, it even ran a test g code for movement. The problem", "g code for movement. The problem is now the Z axis wont move", "off the bed). I ordered some new end stop switches to try on", "have a Maker Farm Prusa i3v 8\" i just finished building. Initially when", "for physical issues such as binding or nuts coming out of traps, everything's", "such as binding or nuts coming out of traps, everything's OK there. In", "i3v 8\" i just finished building. Initially when i first homed it, it", "ran a test g code for movement. The problem is now the Z", "(the hotend is about 2mm off the bed). I ordered some new end", "wont move anymore. First i checked for physical issues such as binding or", "end stop switches to try on my Z axis....any thoughts? I'll update after", "the the Z axis is not on the endstop, its resting on its", "just finished building. Initially when i first homed it, it ran fine, it", "& y no problem, but Z will not move, there is no noise", "is the the Z axis is not on the endstop, its resting on", "or nuts coming out of traps, everything's OK there. In Pronterface i can", "switches to try on my Z axis....any thoughts? I'll update after switch install.", "binding or nuts coming out of traps, everything's OK there. In Pronterface i", "not move, there is no noise from the steppers. Also unusual is the", "in a spot (the hotend is about 2mm off the bed). I ordered", "I have a Maker Farm Prusa i3v 8\" i just finished building. Initially", "not on the endstop, its resting on its own in a spot (the", "unusual is the the Z axis is not on the endstop, its resting", "problem, but Z will not move, there is no noise from the steppers.", "own in a spot (the hotend is about 2mm off the bed). I", "a Maker Farm Prusa i3v 8\" i just finished building. Initially when i", "the endstop, its resting on its own in a spot (the hotend is", "finished building. Initially when i first homed it, it ran fine, it even", "traps, everything's OK there. In Pronterface i can move x & y no", "i first homed it, it ran fine, it even ran a test g", "there is no noise from the steppers. Also unusual is the the Z", "of traps, everything's OK there. In Pronterface i can move x & y", "as binding or nuts coming out of traps, everything's OK there. In Pronterface", "anymore. First i checked for physical issues such as binding or nuts coming", "steppers. Also unusual is the the Z axis is not on the endstop,", "on the endstop, its resting on its own in a spot (the hotend", "is about 2mm off the bed). I ordered some new end stop switches", "there. In Pronterface i can move x & y no problem, but Z", "checked for physical issues such as binding or nuts coming out of traps,", "hotend is about 2mm off the bed). I ordered some new end stop", "nuts coming out of traps, everything's OK there. In Pronterface i can move", "coming out of traps, everything's OK there. In Pronterface i can move x", "physical issues such as binding or nuts coming out of traps, everything's OK", "everything's OK there. In Pronterface i can move x & y no problem,", "In Pronterface i can move x & y no problem, but Z will", "Z axis wont move anymore. First i checked for physical issues such as", "even ran a test g code for movement. The problem is now the", "it ran fine, it even ran a test g code for movement. The", "from the steppers. Also unusual is the the Z axis is not on", "for movement. The problem is now the Z axis wont move anymore. First", "out of traps, everything's OK there. In Pronterface i can move x &", "y no problem, but Z will not move, there is no noise from", "i can move x & y no problem, but Z will not move,", "it even ran a test g code for movement. The problem is now", "Initially when i first homed it, it ran fine, it even ran a", "issues such as binding or nuts coming out of traps, everything's OK there.", "spot (the hotend is about 2mm off the bed). I ordered some new", "noise from the steppers. Also unusual is the the Z axis is not", "Farm Prusa i3v 8\" i just finished building. Initially when i first homed", "first homed it, it ran fine, it even ran a test g code", "the Z axis is not on the endstop, its resting on its own", "the Z axis wont move anymore. First i checked for physical issues such", "on its own in a spot (the hotend is about 2mm off the", "Prusa i3v 8\" i just finished building. Initially when i first homed it,", "2mm off the bed). I ordered some new end stop switches to try", "problem is now the Z axis wont move anymore. First i checked for", "Also unusual is the the Z axis is not on the endstop, its", "homed it, it ran fine, it even ran a test g code for", "OK there. In Pronterface i can move x & y no problem, but", "movement. The problem is now the Z axis wont move anymore. First i", "is not on the endstop, its resting on its own in a spot", "First i checked for physical issues such as binding or nuts coming out", "can move x & y no problem, but Z will not move, there", "is no noise from the steppers. Also unusual is the the Z axis", "some new end stop switches to try on my Z axis....any thoughts? I'll", "its resting on its own in a spot (the hotend is about 2mm", "when i first homed it, it ran fine, it even ran a test", "axis is not on the endstop, its resting on its own in a", "axis wont move anymore. First i checked for physical issues such as binding", "Z axis is not on the endstop, its resting on its own in", "its own in a spot (the hotend is about 2mm off the bed).", "Maker Farm Prusa i3v 8\" i just finished building. Initially when i first", "a spot (the hotend is about 2mm off the bed). I ordered some", "move, there is no noise from the steppers. Also unusual is the the", "test g code for movement. The problem is now the Z axis wont", "ordered some new end stop switches to try on my Z axis....any thoughts?", "the steppers. Also unusual is the the Z axis is not on the", "I ordered some new end stop switches to try on my Z axis....any", "i just finished building. Initially when i first homed it, it ran fine,", "bed). I ordered some new end stop switches to try on my Z", "it, it ran fine, it even ran a test g code for movement.", "stop switches to try on my Z axis....any thoughts? I'll update after switch" ]
[ "to print a few upgrades but after coming home after an hour, it", "evening i have been trying to print a few upgrades but after coming", "soft so the gear grinds parts off? I never had this problem before.", "extruder. Is this because the filament that is being extruded is getting to", "to soft so the gear grinds parts off? I never had this problem", "getting to soft so the gear grinds parts off? I never had this", "print a few upgrades but after coming home after an hour, it is", "hour, it is printing in the air because there is to much filament", "this because the filament that is being extruded is getting to soft so", "inside the extruder. Is this because the filament that is being extruded is", "air because there is to much filament dust inside the extruder. Is this", "the air because there is to much filament dust inside the extruder. Is", "few upgrades but after coming home after an hour, it is printing in", "been trying to print a few upgrades but after coming home after an", "it is printing in the air because there is to much filament dust", "the extruder. Is this because the filament that is being extruded is getting", "a few upgrades but after coming home after an hour, it is printing", "being extruded is getting to soft so the gear grinds parts off? I", "extruded is getting to soft so the gear grinds parts off? I never", "after coming home after an hour, it is printing in the air because", "is getting to soft so the gear grinds parts off? I never had", "the gear grinds parts off? I never had this problem before. Printer: Anet", "filament dust inside the extruder. Is this because the filament that is being", "printing in the air because there is to much filament dust inside the", "is to much filament dust inside the extruder. Is this because the filament", "much filament dust inside the extruder. Is this because the filament that is", "home after an hour, it is printing in the air because there is", "because the filament that is being extruded is getting to soft so the", "the filament that is being extruded is getting to soft so the gear", "is printing in the air because there is to much filament dust inside", "filament that is being extruded is getting to soft so the gear grinds", "i have been trying to print a few upgrades but after coming home", "there is to much filament dust inside the extruder. Is this because the", "but after coming home after an hour, it is printing in the air", "is being extruded is getting to soft so the gear grinds parts off?", "Is this because the filament that is being extruded is getting to soft", "coming home after an hour, it is printing in the air because there", "have been trying to print a few upgrades but after coming home after", "in the air because there is to much filament dust inside the extruder.", "trying to print a few upgrades but after coming home after an hour,", "dust inside the extruder. Is this because the filament that is being extruded", "because there is to much filament dust inside the extruder. Is this because", "that is being extruded is getting to soft so the gear grinds parts", "after an hour, it is printing in the air because there is to", "gear grinds parts off? I never had this problem before. Printer: Anet A8.", "upgrades but after coming home after an hour, it is printing in the", "Yesterday evening i have been trying to print a few upgrades but after", "to much filament dust inside the extruder. Is this because the filament that", "so the gear grinds parts off? I never had this problem before. Printer:", "an hour, it is printing in the air because there is to much" ]
[ "no infill\\) to get a little more horizontal coverage out of it? \\Is", "Mode\" (or single outline corkscrew printing mode) for quick nonfunctional prints, but it", "it? \\Is the answer to this literally just \"Try to print without infill?\"", "like using \"Vase Mode\" (or single outline corkscrew printing mode) for quick nonfunctional", "little more horizontal coverage out of it? \\Is the answer to this literally", "horizontal or near horizontal surfaces. I understand why it does this, but is", "prints, but it tends to leave gaps in horizontal or near horizontal surfaces.", "but it tends to leave gaps in horizontal or near horizontal surfaces. I", "leave gaps in horizontal or near horizontal surfaces. I understand why it does", "infill\\) to get a little more horizontal coverage out of it? \\Is the", "a little more horizontal coverage out of it? \\Is the answer to this", "nonfunctional prints, but it tends to leave gaps in horizontal or near horizontal", "tends to leave gaps in horizontal or near horizontal surfaces. I understand why", "surfaces. I understand why it does this, but is there a way (beyond", "out of it? \\Is the answer to this literally just \"Try to print", "in horizontal or near horizontal surfaces. I understand why it does this, but", "there a way (beyond printing with no infill\\) to get a little more", "of it? \\Is the answer to this literally just \"Try to print without", "near horizontal surfaces. I understand why it does this, but is there a", "to leave gaps in horizontal or near horizontal surfaces. I understand why it", "mode) for quick nonfunctional prints, but it tends to leave gaps in horizontal", "to get a little more horizontal coverage out of it? \\Is the answer", "get a little more horizontal coverage out of it? \\Is the answer to", "or near horizontal surfaces. I understand why it does this, but is there", "but is there a way (beyond printing with no infill\\) to get a", "horizontal surfaces. I understand why it does this, but is there a way", "outline corkscrew printing mode) for quick nonfunctional prints, but it tends to leave", "this, but is there a way (beyond printing with no infill\\) to get", "with no infill\\) to get a little more horizontal coverage out of it?", "why it does this, but is there a way (beyond printing with no", "(beyond printing with no infill\\) to get a little more horizontal coverage out", "gaps in horizontal or near horizontal surfaces. I understand why it does this,", "\"Vase Mode\" (or single outline corkscrew printing mode) for quick nonfunctional prints, but", "coverage out of it? \\Is the answer to this literally just \"Try to", "single outline corkscrew printing mode) for quick nonfunctional prints, but it tends to", "I understand why it does this, but is there a way (beyond printing", "quick nonfunctional prints, but it tends to leave gaps in horizontal or near", "it does this, but is there a way (beyond printing with no infill\\)", "way (beyond printing with no infill\\) to get a little more horizontal coverage", "I like using \"Vase Mode\" (or single outline corkscrew printing mode) for quick", "printing mode) for quick nonfunctional prints, but it tends to leave gaps in", "(or single outline corkscrew printing mode) for quick nonfunctional prints, but it tends", "horizontal coverage out of it? \\Is the answer to this literally just \"Try", "is there a way (beyond printing with no infill\\) to get a little", "understand why it does this, but is there a way (beyond printing with", "it tends to leave gaps in horizontal or near horizontal surfaces. I understand", "a way (beyond printing with no infill\\) to get a little more horizontal", "using \"Vase Mode\" (or single outline corkscrew printing mode) for quick nonfunctional prints,", "does this, but is there a way (beyond printing with no infill\\) to", "printing with no infill\\) to get a little more horizontal coverage out of", "more horizontal coverage out of it? \\*Is the answer to this literally just", "corkscrew printing mode) for quick nonfunctional prints, but it tends to leave gaps", "for quick nonfunctional prints, but it tends to leave gaps in horizontal or" ]
[ "it is not printing circles correctly although I have change firmware and stepping", "printer it is not printing circles correctly although I have change firmware and", "and stepping of motor advise if anyone know the solution. [![enter image description", "stepping of motor advise if anyone know the solution. [![enter image description here](https://i.stack.imgur.com/7egRT.jpg)](https://i.stack.imgur.com/7egRT.jpg)", "am having issue with my new printer it is not printing circles correctly", "although I have change firmware and stepping of motor advise if anyone know", "with my new printer it is not printing circles correctly although I have", "is not printing circles correctly although I have change firmware and stepping of", "issue with my new printer it is not printing circles correctly although I", "I have change firmware and stepping of motor advise if anyone know the", "circles correctly although I have change firmware and stepping of motor advise if", "having issue with my new printer it is not printing circles correctly although", "I am having issue with my new printer it is not printing circles", "change firmware and stepping of motor advise if anyone know the solution. [![enter", "have change firmware and stepping of motor advise if anyone know the solution.", "new printer it is not printing circles correctly although I have change firmware", "firmware and stepping of motor advise if anyone know the solution. [![enter image", "my new printer it is not printing circles correctly although I have change", "correctly although I have change firmware and stepping of motor advise if anyone", "printing circles correctly although I have change firmware and stepping of motor advise", "not printing circles correctly although I have change firmware and stepping of motor" ]
[ "to get something decent printed for days but nothing works! I have a", "in the process of trying to manually level the bed and I broke", "[dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only dual extruders - both regular & large bed, 2. There", "firmware for RepRap 3D printers based on the Arduino platform, 3. JoelLisenby's GitHub", "single extruder regular/large bed firmware & how to configure a large bed (if", "JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized firmware for RepRap 3D printers based on the", "for RepRap 3D printers based on the Arduino platform, 3. JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware).", "get something decent printed for days but nothing works! I have a Tarantula", "but nothing works! I have a Tarantula Tevo i3 `MKS Base V1.4` and", "even more, see [Tevo Tarantula incorrectly auto leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just now", "directs to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only dual extruders - both regular & large", "now in the process of trying to manually level the bed and I", "a single extruder regular/large bed firmware & how to configure a large bed", "am puzzled to get good prints. 1. What is the stock firmware for", "& plenty of error. Still I am puzzled to get good prints. 1.", "prints. 1. What is the stock firmware for a single extruder regular/large bed", "extruder. But did manage to restore firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So the [Tevo", "firmware? I need help sorting out what's out there. I did not manage", "auto bed leveling firmware? I need help sorting out what's out there. I", "is the auto bed leveling firmware? I need help sorting out what's out", "Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only dual extruders - both", "- Optimized firmware for RepRap 3D printers based on the Arduino platform, 3.", "for a single extruder regular/large bed firmware & how to configure a large", "works! I have a Tarantula Tevo i3 `MKS Base V1.4` and have done", "the [Tevo 3D Printing Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only", "the auto bed leveling firmware? I need help sorting out what's out there.", "regular & large bed, 2. There is JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized firmware", "manually level the bed and I broke the hot end holder plastic plate...", "is JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized firmware for RepRap 3D printers based on", "a lot of trial & plenty of error. Still I am puzzled to", "firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So the [Tevo 3D Printing Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs", "bed leveling sensor but it just got me messed-up even more, see [Tevo", "decent printed for days but nothing works! I have a Tarantula Tevo i3", "extruders - both regular & large bed, 2. There is JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula)", "--- EDIT: The sensor I'm using is [SN04-N Inductive Proximity Sensor - 5mm](https://www.phidgets.com/?tier=3&catid=13&pcid=11&prodid=402)", "I broke the hot end holder plastic plate... --- EDIT: The sensor I'm", "configure a large bed (if needed to be configured)? 2. Which is the", "more, see [Tevo Tarantula incorrectly auto leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just now in", "(Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting up the auto bed leveling sensor but it just", "trying to manually level the bed and I broke the hot end holder", "large bed, 2. There is JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized firmware for RepRap", "3D Printing Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only dual extruders", "with a single extruder. But did manage to restore firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1.", "with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So the [Tevo 3D Printing Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to", "dual extruders - both regular & large bed, 2. There is JimBrown's GitHub", "auto bed leveling sensor but it just got me messed-up even more, see", "me messed-up even more, see [Tevo Tarantula incorrectly auto leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm", "something decent printed for days but nothing works! I have a Tarantula Tevo", "been trying to get something decent printed for days but nothing works! I", "error. Still I am puzzled to get good prints. 1. What is the", "be configured)? 2. Which is the auto bed leveling firmware? I need help", "out what's out there. I did not manage to configure a large bed", "manage to restore firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So the [Tevo 3D Printing Store", "of trial & plenty of error. Still I am puzzled to get good", "Up Auto Bed Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting up the auto bed leveling", "end holder plastic plate... --- EDIT: The sensor I'm using is [SN04-N Inductive", "[Tevo Tarantula incorrectly auto leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just now in the process", "it just got me messed-up even more, see [Tevo Tarantula incorrectly auto leveling", "trial & plenty of error. Still I am puzzled to get good prints.", "up the auto bed leveling sensor but it just got me messed-up even", "But did manage to restore firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So the [Tevo 3D", "I've been trying to get something decent printed for days but nothing works!", "Tarantula incorrectly auto leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just now in the process of", "on the Arduino platform, 3. JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed this, [YouTube -", "printers based on the Arduino platform, 3. JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed this,", "the hot end holder plastic plate... --- EDIT: The sensor I'm using is", "GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized firmware for RepRap 3D printers based on the Arduino", "V1.4` and have done a lot of trial & plenty of error. Still", "restore firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So the [Tevo 3D Printing Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware)", "the Arduino platform, 3. JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed this, [YouTube - Setting", "the auto bed leveling sensor but it just got me messed-up even more,", "just now in the process of trying to manually level the bed and", "leveling sensor but it just got me messed-up even more, see [Tevo Tarantula", "leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just now in the process of trying to manually", "is the stock firmware for a single extruder regular/large bed firmware & how", "2. There is JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized firmware for RepRap 3D printers", "did not manage to configure a large bed with a single extruder. But", "RepRap 3D printers based on the Arduino platform, 3. JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I", "firmware for a single extruder regular/large bed firmware & how to configure a", "3. JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed this, [YouTube - Setting Up Auto Bed", "trying to get something decent printed for days but nothing works! I have", "plastic plate... --- EDIT: The sensor I'm using is [SN04-N Inductive Proximity Sensor", "link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only dual extruders - both regular &", "a large bed (if needed to be configured)? 2. Which is the auto", "needed to be configured)? 2. Which is the auto bed leveling firmware? I", "holder plastic plate... --- EDIT: The sensor I'm using is [SN04-N Inductive Proximity", "both regular & large bed, 2. There is JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized", "[Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So the [Tevo 3D Printing Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to a", "[YouTube - Setting Up Auto Bed Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting up the", "for days but nothing works! I have a Tarantula Tevo i3 `MKS Base", "I am puzzled to get good prints. 1. What is the stock firmware", "- only dual extruders - both regular & large bed, 2. There is", "the process of trying to manually level the bed and I broke the", "have a Tarantula Tevo i3 `MKS Base V1.4` and have done a lot", "need help sorting out what's out there. I did not manage to configure", "bed and I broke the hot end holder plastic plate... --- EDIT: The", "[MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized firmware for RepRap 3D printers based on the Arduino platform,", "based on the Arduino platform, 3. JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed this, [YouTube", "done a lot of trial & plenty of error. Still I am puzzled", "of error. Still I am puzzled to get good prints. 1. What is", "1. So the [Tevo 3D Printing Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0)", "There is JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized firmware for RepRap 3D printers based", "manage to configure a large bed with a single extruder. But did manage", "to restore firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So the [Tevo 3D Printing Store firmware", "platform, 3. JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed this, [YouTube - Setting Up Auto", "Still I am puzzled to get good prints. 1. What is the stock", "- Setting Up Auto Bed Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting up the auto", "Tevo i3 `MKS Base V1.4` and have done a lot of trial &", "messed-up even more, see [Tevo Tarantula incorrectly auto leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just", "Bed Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting up the auto bed leveling sensor but", "Which is the auto bed leveling firmware? I need help sorting out what's", "nothing works! I have a Tarantula Tevo i3 `MKS Base V1.4` and have", "and have done a lot of trial & plenty of error. Still I", "bed leveling firmware? I need help sorting out what's out there. I did", "I'm just now in the process of trying to manually level the bed", "a Tarantula Tevo i3 `MKS Base V1.4` and have done a lot of", "bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just now in the process of trying to manually level the", "but it just got me messed-up even more, see [Tevo Tarantula incorrectly auto", "printed for days but nothing works! I have a Tarantula Tevo i3 `MKS", "What is the stock firmware for a single extruder regular/large bed firmware &", "firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only dual extruders - both regular", "3D printers based on the Arduino platform, 3. JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed", "& how to configure a large bed (if needed to be configured)? 2.", "the bed and I broke the hot end holder plastic plate... --- EDIT:", "a single extruder. But did manage to restore firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So", "broke the hot end holder plastic plate... --- EDIT: The sensor I'm using", "hot end holder plastic plate... --- EDIT: The sensor I'm using is [SN04-N", "of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just now in the process of trying to manually level", "Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting up the auto bed leveling sensor but it just got", "puzzled to get good prints. 1. What is the stock firmware for a", "to configure a large bed (if needed to be configured)? 2. Which is", "to manually level the bed and I broke the hot end holder plastic", "I followed this, [YouTube - Setting Up Auto Bed Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for", "(if needed to be configured)? 2. Which is the auto bed leveling firmware?", "just got me messed-up even more, see [Tevo Tarantula incorrectly auto leveling of", "So the [Tevo 3D Printing Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) -", "[TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed this, [YouTube - Setting Up Auto Bed Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs),", "leveling firmware? I need help sorting out what's out there. I did not", "have done a lot of trial & plenty of error. Still I am", "only dual extruders - both regular & large bed, 2. There is JimBrown's", "plenty of error. Still I am puzzled to get good prints. 1. What", "this, [YouTube - Setting Up Auto Bed Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting up", "out there. I did not manage to configure a large bed with a", "lot of trial & plenty of error. Still I am puzzled to get", "for setting up the auto bed leveling sensor but it just got me", "setting up the auto bed leveling sensor but it just got me messed-up", "days but nothing works! I have a Tarantula Tevo i3 `MKS Base V1.4`", "get good prints. 1. What is the stock firmware for a single extruder", "bed with a single extruder. But did manage to restore firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/)", "I did not manage to configure a large bed with a single extruder.", "JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed this, [YouTube - Setting Up Auto Bed Leveling", "I have a Tarantula Tevo i3 `MKS Base V1.4` and have done a", "Setting Up Auto Bed Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting up the auto bed", "bed, 2. There is JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized firmware for RepRap 3D", "a large bed with a single extruder. But did manage to restore firmware", "2. Which is the auto bed leveling firmware? I need help sorting out", "help sorting out what's out there. I did not manage to configure a", "there. I did not manage to configure a large bed with a single", "process of trying to manually level the bed and I broke the hot", "configured)? 2. Which is the auto bed leveling firmware? I need help sorting", "auto leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just now in the process of trying to", "1. What is the stock firmware for a single extruder regular/large bed firmware", "Auto Bed Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting up the auto bed leveling sensor", "bed firmware & how to configure a large bed (if needed to be", "`MKS Base V1.4` and have done a lot of trial & plenty of", "to configure a large bed with a single extruder. But did manage to", "large bed with a single extruder. But did manage to restore firmware with", "extruder regular/large bed firmware & how to configure a large bed (if needed", "Printing Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only dual extruders -", "plate... --- EDIT: The sensor I'm using is [SN04-N Inductive Proximity Sensor -", "followed this, [YouTube - Setting Up Auto Bed Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting", "sorting out what's out there. I did not manage to configure a large", "Tarantula Tevo i3 `MKS Base V1.4` and have done a lot of trial", "sensor but it just got me messed-up even more, see [Tevo Tarantula incorrectly", "incorrectly auto leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just now in the process of trying", "- both regular & large bed, 2. There is JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) -", "to be configured)? 2. Which is the auto bed leveling firmware? I need", "how to configure a large bed (if needed to be configured)? 2. Which", "of trying to manually level the bed and I broke the hot end", "good prints. 1. What is the stock firmware for a single extruder regular/large", "Base V1.4` and have done a lot of trial & plenty of error.", "single extruder. But did manage to restore firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So the", "did manage to restore firmware with [Marlin-2.0.x](https://github.com/MarlinFirmware/Marlin/) 1. So the [Tevo 3D Printing", "a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only dual extruders - both regular & large bed, 2.", "regular/large bed firmware & how to configure a large bed (if needed to", "configure a large bed with a single extruder. But did manage to restore", "i3 `MKS Base V1.4` and have done a lot of trial & plenty", "Arduino platform, 3. JoelLisenby's GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed this, [YouTube - Setting Up", "bed (if needed to be configured)? 2. Which is the auto bed leveling", "what's out there. I did not manage to configure a large bed with", "GitHub [TEVO-Tarantula-I3-Marlin-Firmware](https://github.com/JoelLisenby/TEVO-Tarantula-I3-Marlin-Firmware). I followed this, [YouTube - Setting Up Auto Bed Leveling (Tevo", "I need help sorting out what's out there. I did not manage to", "to get good prints. 1. What is the stock firmware for a single", "large bed (if needed to be configured)? 2. Which is the auto bed", "the stock firmware for a single extruder regular/large bed firmware & how to", "firmware & how to configure a large bed (if needed to be configured)?", "to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only dual extruders - both regular & large bed,", "see [Tevo Tarantula incorrectly auto leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling). I'm just now in the", "[Tevo 3D Printing Store firmware link](https://tevo3dprinterstore.com/pages/tevo-tarantula-firmware) directs to a [dropbox](https://www.dropbox.com/sh/ndykfl1wkw8enpj/AACTlV5qC9dpaJA1PYYLACeha?dl=0) - only dual", "level the bed and I broke the hot end holder plastic plate... ---", "and I broke the hot end holder plastic plate... --- EDIT: The sensor", "& large bed, 2. There is JimBrown's GitHub [MarlinTarantula](https://github.com/JimBrown/MarlinTarantula) - Optimized firmware for", "Leveling (Tevo Tarantula)](https://www.youtube.com/watch?v=93p5ziFiGqs), for setting up the auto bed leveling sensor but it", "got me messed-up even more, see [Tevo Tarantula incorrectly auto leveling of bed](https://3dprinting.stackexchange.com/questions/4624/tt-is-bed-auto-leveling).", "stock firmware for a single extruder regular/large bed firmware & how to configure", "Optimized firmware for RepRap 3D printers based on the Arduino platform, 3. JoelLisenby's", "not manage to configure a large bed with a single extruder. But did" ]
[ "equal (more or less 38.20mm) and all W are equal (more or less", "than W, and all S are equal (more or less 38.20mm) and all", "problem? [![enter image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here is the stl I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0>", "less 40.80). I expect that W and S will be 40mm. How can", "or less 40.80). I expect that W and S will be 40mm. How", "W and S are the same in the stl but not in the", "little test with 4 dots aligned with A tower, B and C tower.", "test with 4 dots aligned with A tower, B and C tower. Distance", "is smaller than W, and all S are equal (more or less 38.20mm)", "with 4 dots aligned with A tower, B and C tower. Distance W", "use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I have replaced the steper motor in tower B but", "Here is the stl I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I have replaced the steper", "diferent values of diagonal root but S always is smaller than W, and", "expect that W and S will be 40mm. How can fix this problem?", "S always is smaller than W, and all S are equal (more or", "will be 40mm. How can fix this problem? [![enter image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update:", "a little test with 4 dots aligned with A tower, B and C", "and all W are equal (more or less 40.80). I expect that W", "not in the print. I have tried diferent values of diagonal root but", "W, and all S are equal (more or less 38.20mm) and all W", "How can fix this problem? [![enter image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here is the", "and C tower. Distance W and S are the same in the stl", "have tried diferent values of diagonal root but S always is smaller than", "all S are equal (more or less 38.20mm) and all W are equal", "tower. Distance W and S are the same in the stl but not", "W and S will be 40mm. How can fix this problem? [![enter image", "Update: I have replaced the steper motor in tower B but same result.", "are equal (more or less 38.20mm) and all W are equal (more or", "W are equal (more or less 40.80). I expect that W and S", "stl I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I have replaced the steper motor in tower", "C tower. Distance W and S are the same in the stl but", "stl but not in the print. I have tried diferent values of diagonal", "[![enter image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here is the stl I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update:", "the print. I have tried diferent values of diagonal root but S always", "the stl but not in the print. I have tried diferent values of", "and S will be 40mm. How can fix this problem? [![enter image description", "and S are the same in the stl but not in the print.", "with A tower, B and C tower. Distance W and S are the", "40mm. How can fix this problem? [![enter image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here is", "and all S are equal (more or less 38.20mm) and all W are", "this problem? [![enter image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here is the stl I use:", "description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here is the stl I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I have", "4 dots aligned with A tower, B and C tower. Distance W and", "(more or less 40.80). I expect that W and S will be 40mm.", "the stl I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I have replaced the steper motor in", "I have make a little test with 4 dots aligned with A tower,", "S are the same in the stl but not in the print. I", "S are equal (more or less 38.20mm) and all W are equal (more", "here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here is the stl I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I have replaced", "are equal (more or less 40.80). I expect that W and S will", "Distance W and S are the same in the stl but not in", "make a little test with 4 dots aligned with A tower, B and", "always is smaller than W, and all S are equal (more or less", "tower, B and C tower. Distance W and S are the same in", "in the print. I have tried diferent values of diagonal root but S", "I have tried diferent values of diagonal root but S always is smaller", "in the stl but not in the print. I have tried diferent values", "fix this problem? [![enter image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here is the stl I", "root but S always is smaller than W, and all S are equal", "(more or less 38.20mm) and all W are equal (more or less 40.80).", "of diagonal root but S always is smaller than W, and all S", "but not in the print. I have tried diferent values of diagonal root", "the same in the stl but not in the print. I have tried", "Update: Here is the stl I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I have replaced the", "aligned with A tower, B and C tower. Distance W and S are", "dots aligned with A tower, B and C tower. Distance W and S", "is the stl I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I have replaced the steper motor", "I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I have replaced the steper motor in tower B", "have make a little test with 4 dots aligned with A tower, B", "S will be 40mm. How can fix this problem? [![enter image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png)", "diagonal root but S always is smaller than W, and all S are", "40.80). I expect that W and S will be 40mm. How can fix", "but S always is smaller than W, and all S are equal (more", "image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here is the stl I use: <https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I", "<https://www.dropbox.com/s/2vwjbo387cmk5qa/DeltaCalibration%20v15.stl?dl=0> Update: I have replaced the steper motor in tower B but same", "or less 38.20mm) and all W are equal (more or less 40.80). I", "can fix this problem? [![enter image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here is the stl", "same in the stl but not in the print. I have tried diferent", "be 40mm. How can fix this problem? [![enter image description here](https://i.stack.imgur.com/hkUAj.png)](https://i.stack.imgur.com/hkUAj.png) Update: Here", "B and C tower. Distance W and S are the same in the", "I expect that W and S will be 40mm. How can fix this", "all W are equal (more or less 40.80). I expect that W and", "are the same in the stl but not in the print. I have", "equal (more or less 40.80). I expect that W and S will be", "print. I have tried diferent values of diagonal root but S always is", "38.20mm) and all W are equal (more or less 40.80). I expect that", "that W and S will be 40mm. How can fix this problem? [![enter", "smaller than W, and all S are equal (more or less 38.20mm) and", "less 38.20mm) and all W are equal (more or less 40.80). I expect", "A tower, B and C tower. Distance W and S are the same", "values of diagonal root but S always is smaller than W, and all", "tried diferent values of diagonal root but S always is smaller than W," ]
[ "to do... I'm at a total loss for words here. My printer is", "smooth. I am not sure how to fix this. I have tried fixing", "I've tried Sli3r (I normally use Cura 2.7). I've tried turning down acceleration", "for words here. My printer is a TronXY P802MA. Auto Level, runs Marlin", "(I normally use Cura 2.7). I've tried turning down acceleration as low as", "odd texture. It's at the bottom of this particular model. For some reason,", "print server. The picture shows the odd texture. It's at the bottom of", "the bottom of this particular model. For some reason, within the pictured model,", "with my printer. It doesn't print smooth circular objects. The objects are typically", "circular objects. The objects are typically \"ribbed\" or ridged... never smooth. I am", "what to do... I'm at a total loss for words here. My printer", "at a total loss for words here. My printer is a TronXY P802MA.", "fixing it in Meshmixer, I've tried Sli3r (I normally use Cura 2.7). I've", "tried slowing down the actual print and travel speeds. Short of just replacing", "down the actual print and travel speeds. Short of just replacing the dang", "picture shows the odd texture. It's at the bottom of this particular model.", "particular model. For some reason, within the pictured model, the problem isn't reproduced", "down acceleration as low as it will go (500 in my printer's case),", "here. My printer is a TronXY P802MA. Auto Level, runs Marlin firmware. I", "use Cura 2.7). I've tried turning down acceleration as low as it will", "in Meshmixer, I've tried Sli3r (I normally use Cura 2.7). I've tried turning", "tried Sli3r (I normally use Cura 2.7). I've tried turning down acceleration as", "just replacing the dang thing (not an option at all), I have no", "slowing down the actual print and travel speeds. Short of just replacing the", "I am having this problem with my printer. It doesn't print smooth circular", "loss for words here. My printer is a TronXY P802MA. Auto Level, runs", "I've tried turning down acceleration as low as it will go (500 in", "server. The picture shows the odd texture. It's at the bottom of this", "pictured model, the problem isn't reproduced in the partial spheres. [![Unwanted texture](https://i.stack.imgur.com/WKe5A.jpg \"Unwanted", "printer. It doesn't print smooth circular objects. The objects are typically \"ribbed\" or", "print and travel speeds. Short of just replacing the dang thing (not an", "at all), I have no idea what to do... I'm at a total", "fix this. I have tried fixing it in Meshmixer, I've tried Sli3r (I", "my printer's case), tried slowing down the actual print and travel speeds. Short", "print smooth circular objects. The objects are typically \"ribbed\" or ridged... never smooth.", "shows the odd texture. It's at the bottom of this particular model. For", "replacing the dang thing (not an option at all), I have no idea", "and travel speeds. Short of just replacing the dang thing (not an option", "objects are typically \"ribbed\" or ridged... never smooth. I am not sure how", "The objects are typically \"ribbed\" or ridged... never smooth. I am not sure", "it will go (500 in my printer's case), tried slowing down the actual", "at the bottom of this particular model. For some reason, within the pictured", "Meshmixer, I've tried Sli3r (I normally use Cura 2.7). I've tried turning down", "a TronXY P802MA. Auto Level, runs Marlin firmware. I use Octoprint as my", "as my print server. The picture shows the odd texture. It's at the", "I use Octoprint as my print server. The picture shows the odd texture.", "The picture shows the odd texture. It's at the bottom of this particular", "to fix this. I have tried fixing it in Meshmixer, I've tried Sli3r", "I have tried fixing it in Meshmixer, I've tried Sli3r (I normally use", "in my printer's case), tried slowing down the actual print and travel speeds.", "all), I have no idea what to do... I'm at a total loss", "acceleration as low as it will go (500 in my printer's case), tried", "as it will go (500 in my printer's case), tried slowing down the", "how to fix this. I have tried fixing it in Meshmixer, I've tried", "problem with my printer. It doesn't print smooth circular objects. The objects are", "turning down acceleration as low as it will go (500 in my printer's", "as low as it will go (500 in my printer's case), tried slowing", "runs Marlin firmware. I use Octoprint as my print server. The picture shows", "an option at all), I have no idea what to do... I'm at", "is a TronXY P802MA. Auto Level, runs Marlin firmware. I use Octoprint as", "this problem with my printer. It doesn't print smooth circular objects. The objects", "I am not sure how to fix this. I have tried fixing it", "go (500 in my printer's case), tried slowing down the actual print and", "Octoprint as my print server. The picture shows the odd texture. It's at", "printer's case), tried slowing down the actual print and travel speeds. Short of", "travel speeds. Short of just replacing the dang thing (not an option at", "thing (not an option at all), I have no idea what to do...", "objects. The objects are typically \"ribbed\" or ridged... never smooth. I am not", "(500 in my printer's case), tried slowing down the actual print and travel", "have no idea what to do... I'm at a total loss for words", "typically \"ribbed\" or ridged... never smooth. I am not sure how to fix", "normally use Cura 2.7). I've tried turning down acceleration as low as it", "printer is a TronXY P802MA. Auto Level, runs Marlin firmware. I use Octoprint", "total loss for words here. My printer is a TronXY P802MA. Auto Level,", "sure how to fix this. I have tried fixing it in Meshmixer, I've", "actual print and travel speeds. Short of just replacing the dang thing (not", "firmware. I use Octoprint as my print server. The picture shows the odd", "not sure how to fix this. I have tried fixing it in Meshmixer,", "problem isn't reproduced in the partial spheres. [![Unwanted texture](https://i.stack.imgur.com/WKe5A.jpg \"Unwanted texture\")](https://i.stack.imgur.com/WKe5A.jpg \"Unwanted texture\")", "the actual print and travel speeds. Short of just replacing the dang thing", "speeds. Short of just replacing the dang thing (not an option at all),", "it in Meshmixer, I've tried Sli3r (I normally use Cura 2.7). I've tried", "some reason, within the pictured model, the problem isn't reproduced in the partial", "words here. My printer is a TronXY P802MA. Auto Level, runs Marlin firmware.", "the problem isn't reproduced in the partial spheres. [![Unwanted texture](https://i.stack.imgur.com/WKe5A.jpg \"Unwanted texture\")](https://i.stack.imgur.com/WKe5A.jpg \"Unwanted", "will go (500 in my printer's case), tried slowing down the actual print", "model, the problem isn't reproduced in the partial spheres. [![Unwanted texture](https://i.stack.imgur.com/WKe5A.jpg \"Unwanted texture\")](https://i.stack.imgur.com/WKe5A.jpg", "reason, within the pictured model, the problem isn't reproduced in the partial spheres.", "do... I'm at a total loss for words here. My printer is a", "low as it will go (500 in my printer's case), tried slowing down", "Marlin firmware. I use Octoprint as my print server. The picture shows the", "my printer. It doesn't print smooth circular objects. The objects are typically \"ribbed\"", "the pictured model, the problem isn't reproduced in the partial spheres. [![Unwanted texture](https://i.stack.imgur.com/WKe5A.jpg", "tried turning down acceleration as low as it will go (500 in my", "Short of just replacing the dang thing (not an option at all), I", "of just replacing the dang thing (not an option at all), I have", "I'm at a total loss for words here. My printer is a TronXY", "It doesn't print smooth circular objects. The objects are typically \"ribbed\" or ridged...", "ridged... never smooth. I am not sure how to fix this. I have", "am not sure how to fix this. I have tried fixing it in", "or ridged... never smooth. I am not sure how to fix this. I", "doesn't print smooth circular objects. The objects are typically \"ribbed\" or ridged... never", "\"ribbed\" or ridged... never smooth. I am not sure how to fix this.", "no idea what to do... I'm at a total loss for words here.", "It's at the bottom of this particular model. For some reason, within the", "Auto Level, runs Marlin firmware. I use Octoprint as my print server. The", "idea what to do... I'm at a total loss for words here. My", "Level, runs Marlin firmware. I use Octoprint as my print server. The picture", "TronXY P802MA. Auto Level, runs Marlin firmware. I use Octoprint as my print", "have tried fixing it in Meshmixer, I've tried Sli3r (I normally use Cura", "this. I have tried fixing it in Meshmixer, I've tried Sli3r (I normally", "tried fixing it in Meshmixer, I've tried Sli3r (I normally use Cura 2.7).", "my print server. The picture shows the odd texture. It's at the bottom", "a total loss for words here. My printer is a TronXY P802MA. Auto", "(not an option at all), I have no idea what to do... I'm", "the dang thing (not an option at all), I have no idea what", "within the pictured model, the problem isn't reproduced in the partial spheres. [![Unwanted", "For some reason, within the pictured model, the problem isn't reproduced in the", "this particular model. For some reason, within the pictured model, the problem isn't", "I have no idea what to do... I'm at a total loss for", "P802MA. Auto Level, runs Marlin firmware. I use Octoprint as my print server.", "case), tried slowing down the actual print and travel speeds. Short of just", "never smooth. I am not sure how to fix this. I have tried", "texture. It's at the bottom of this particular model. For some reason, within", "smooth circular objects. The objects are typically \"ribbed\" or ridged... never smooth. I", "use Octoprint as my print server. The picture shows the odd texture. It's", "model. For some reason, within the pictured model, the problem isn't reproduced in", "bottom of this particular model. For some reason, within the pictured model, the", "2.7). I've tried turning down acceleration as low as it will go (500", "of this particular model. For some reason, within the pictured model, the problem", "My printer is a TronXY P802MA. Auto Level, runs Marlin firmware. I use", "the odd texture. It's at the bottom of this particular model. For some", "option at all), I have no idea what to do... I'm at a", "are typically \"ribbed\" or ridged... never smooth. I am not sure how to", "Cura 2.7). I've tried turning down acceleration as low as it will go", "Sli3r (I normally use Cura 2.7). I've tried turning down acceleration as low", "dang thing (not an option at all), I have no idea what to", "am having this problem with my printer. It doesn't print smooth circular objects.", "having this problem with my printer. It doesn't print smooth circular objects. The" ]
[ "I use a 20A relay to power them on, since they require high", "use a 20A relay to power them on, since they require high power", "by arduino or Raswgesrh. I'm planning to use them with NanoDLP on Raswgesrh", "print ends? The other way would be to just install an on/off switch", "power them on, since they require high power and can't be directly driven", "to power them on, since they require high power and can't be directly", "be directly driven by arduino or Raswgesrh. I'm planning to use them with", "directly driven by arduino or Raswgesrh. I'm planning to use them with NanoDLP", "GRBL on Asquine. Is it possible to make NanoDLP tell GRBL to power", "this step should be automated somehow. Is there a way to do it?", "it manually, but I feel this step should be automated somehow. Is there", "NanoDLP tell GRBL to power on (send digital 1/+5V) the relay when the", "possible to make NanoDLP tell GRBL to power on (send digital 1/+5V) the", "1/+5V) the relay when the print starts and power it off (send digital", "or Raswgesrh. I'm planning to use them with NanoDLP on Raswgesrh + GRBL", "0/GND) when the print ends? The other way would be to just install", "but I feel this step should be automated somehow. Is there a way", "power on (send digital 1/+5V) the relay when the print starts and power", "to make NanoDLP tell GRBL to power on (send digital 1/+5V) the relay", "digital 1/+5V) the relay when the print starts and power it off (send", "relay when the print starts and power it off (send digital 0/GND) when", "power and can't be directly driven by arduino or Raswgesrh. I'm planning to", "use them with NanoDLP on Raswgesrh + GRBL on Asquine. Is it possible", "it possible to make NanoDLP tell GRBL to power on (send digital 1/+5V)", "and do it manually, but I feel this step should be automated somehow.", "feel this step should be automated somehow. Is there a way to do", "Raswgesrh. I'm planning to use them with NanoDLP on Raswgesrh + GRBL on", "to just install an on/off switch and do it manually, but I feel", "a 20A relay to power them on, since they require high power and", "my own DLP printer with UV LEDs. I use a 20A relay to", "the print ends? The other way would be to just install an on/off", "just install an on/off switch and do it manually, but I feel this", "manually, but I feel this step should be automated somehow. Is there a", "UV LEDs. I use a 20A relay to power them on, since they", "the print starts and power it off (send digital 0/GND) when the print", "when the print starts and power it off (send digital 0/GND) when the", "on/off switch and do it manually, but I feel this step should be", "power it off (send digital 0/GND) when the print ends? The other way", "20A relay to power them on, since they require high power and can't", "to use them with NanoDLP on Raswgesrh + GRBL on Asquine. Is it", "NanoDLP on Raswgesrh + GRBL on Asquine. Is it possible to make NanoDLP", "install an on/off switch and do it manually, but I feel this step", "switch and do it manually, but I feel this step should be automated", "arduino or Raswgesrh. I'm planning to use them with NanoDLP on Raswgesrh +", "building my own DLP printer with UV LEDs. I use a 20A relay", "DLP printer with UV LEDs. I use a 20A relay to power them", "tell GRBL to power on (send digital 1/+5V) the relay when the print", "would be to just install an on/off switch and do it manually, but", "off (send digital 0/GND) when the print ends? The other way would be", "since they require high power and can't be directly driven by arduino or", "to power on (send digital 1/+5V) the relay when the print starts and", "require high power and can't be directly driven by arduino or Raswgesrh. I'm", "(send digital 1/+5V) the relay when the print starts and power it off", "and can't be directly driven by arduino or Raswgesrh. I'm planning to use", "I feel this step should be automated somehow. Is there a way to", "when the print ends? The other way would be to just install an", "and power it off (send digital 0/GND) when the print ends? The other", "high power and can't be directly driven by arduino or Raswgesrh. I'm planning", "the relay when the print starts and power it off (send digital 0/GND)", "on Asquine. Is it possible to make NanoDLP tell GRBL to power on", "on (send digital 1/+5V) the relay when the print starts and power it", "I'm building my own DLP printer with UV LEDs. I use a 20A", "do it manually, but I feel this step should be automated somehow. Is", "with NanoDLP on Raswgesrh + GRBL on Asquine. Is it possible to make", "LEDs. I use a 20A relay to power them on, since they require", "+ GRBL on Asquine. Is it possible to make NanoDLP tell GRBL to", "driven by arduino or Raswgesrh. I'm planning to use them with NanoDLP on", "Asquine. Is it possible to make NanoDLP tell GRBL to power on (send", "them on, since they require high power and can't be directly driven by", "way would be to just install an on/off switch and do it manually,", "I'm planning to use them with NanoDLP on Raswgesrh + GRBL on Asquine.", "be to just install an on/off switch and do it manually, but I", "on Raswgesrh + GRBL on Asquine. Is it possible to make NanoDLP tell", "own DLP printer with UV LEDs. I use a 20A relay to power", "GRBL to power on (send digital 1/+5V) the relay when the print starts", "can't be directly driven by arduino or Raswgesrh. I'm planning to use them", "planning to use them with NanoDLP on Raswgesrh + GRBL on Asquine. Is", "they require high power and can't be directly driven by arduino or Raswgesrh.", "Raswgesrh + GRBL on Asquine. Is it possible to make NanoDLP tell GRBL", "(send digital 0/GND) when the print ends? The other way would be to", "with UV LEDs. I use a 20A relay to power them on, since", "ends? The other way would be to just install an on/off switch and", "make NanoDLP tell GRBL to power on (send digital 1/+5V) the relay when", "them with NanoDLP on Raswgesrh + GRBL on Asquine. Is it possible to", "starts and power it off (send digital 0/GND) when the print ends? The", "an on/off switch and do it manually, but I feel this step should", "it off (send digital 0/GND) when the print ends? The other way would", "print starts and power it off (send digital 0/GND) when the print ends?", "other way would be to just install an on/off switch and do it", "on, since they require high power and can't be directly driven by arduino", "relay to power them on, since they require high power and can't be", "Is it possible to make NanoDLP tell GRBL to power on (send digital", "The other way would be to just install an on/off switch and do", "digital 0/GND) when the print ends? The other way would be to just", "printer with UV LEDs. I use a 20A relay to power them on," ]
[ "a [Alunar M508 machine](https://www.alunar.net/m508-self-assembly-3d-printer.html) that I am trying to get new firmware on.", "but don't have any experience on what to edit in the code to", "into Marlin to put on the machine, but don't have any experience on", "off. I was looking into Marlin to put on the machine, but don't", "what to edit in the code to make it work for this machine.", "axis was mirrored and the home point was way off. I was looking", "in the code to make it work for this machine. Does anyone have", "on. The firmware that was loaded on the machine wasn't very good. The", "any help! Here is a link to [the firmware I am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware).", "I am trying to get new firmware on. The firmware that was loaded", "new firmware on. The firmware that was loaded on the machine wasn't very", "code to make it work for this machine. I appreciate any help! Here", "firmware on. The firmware that was loaded on the machine wasn't very good.", "on the machine, but don't have any experience on what to edit in", "work for this machine. Does anyone have any experience with this machine? Uploading", "to make it work for this machine. Does anyone have any experience with", "to put on the machine, but don't have any experience on what to", "on what to edit in the code to make it work for this", "edit in the code to make it work for this machine. Does anyone", "to make it work for this machine. I appreciate any help! Here is", "link to [the firmware I am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm on MacOS Sierra 10.12.5", "firmware I am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm on MacOS Sierra 10.12.5 using the 1.6.8", "this machine. I appreciate any help! Here is a link to [the firmware", "a link to [the firmware I am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm on MacOS Sierra", "make it work for this machine. Does anyone have any experience with this", "editing the code to make it work for this machine. I appreciate any", "good. The x axis was mirrored and the home point was way off.", "The x axis was mirrored and the home point was way off. I", "the home point was way off. I was looking into Marlin to put", "machine](https://www.alunar.net/m508-self-assembly-3d-printer.html) that I am trying to get new firmware on. The firmware that", "firmware that works or editing the code to make it work for this", "machine, but don't have any experience on what to edit in the code", "am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm on MacOS Sierra 10.12.5 using the 1.6.8 Arduino IDE.", "it work for this machine. I appreciate any help! Here is a link", "have any experience on what to edit in the code to make it", "was looking into Marlin to put on the machine, but don't have any", "this machine? Uploading new firmware that works or editing the code to make", "very good. The x axis was mirrored and the home point was way", "machine. Does anyone have any experience with this machine? Uploading new firmware that", "am trying to get new firmware on. The firmware that was loaded on", "to get new firmware on. The firmware that was loaded on the machine", "for this machine. Does anyone have any experience with this machine? Uploading new", "machine? Uploading new firmware that works or editing the code to make it", "works or editing the code to make it work for this machine. I", "The firmware that was loaded on the machine wasn't very good. The x", "the machine, but don't have any experience on what to edit in the", "trying to get new firmware on. The firmware that was loaded on the", "work for this machine. I appreciate any help! Here is a link to", "that was loaded on the machine wasn't very good. The x axis was", "was mirrored and the home point was way off. I was looking into", "looking into Marlin to put on the machine, but don't have any experience", "with this machine? Uploading new firmware that works or editing the code to", "this machine. Does anyone have any experience with this machine? Uploading new firmware", "appreciate any help! Here is a link to [the firmware I am currently", "and the home point was way off. I was looking into Marlin to", "put on the machine, but don't have any experience on what to edit", "machine wasn't very good. The x axis was mirrored and the home point", "wasn't very good. The x axis was mirrored and the home point was", "loaded on the machine wasn't very good. The x axis was mirrored and", "is a link to [the firmware I am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm on MacOS", "any experience with this machine? Uploading new firmware that works or editing the", "get new firmware on. The firmware that was loaded on the machine wasn't", "I have a [Alunar M508 machine](https://www.alunar.net/m508-self-assembly-3d-printer.html) that I am trying to get new", "the machine wasn't very good. The x axis was mirrored and the home", "to edit in the code to make it work for this machine. Does", "make it work for this machine. I appreciate any help! Here is a", "to [the firmware I am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm on MacOS Sierra 10.12.5 using", "[the firmware I am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm on MacOS Sierra 10.12.5 using the", "new firmware that works or editing the code to make it work for", "Uploading new firmware that works or editing the code to make it work", "have a [Alunar M508 machine](https://www.alunar.net/m508-self-assembly-3d-printer.html) that I am trying to get new firmware", "it work for this machine. Does anyone have any experience with this machine?", "way off. I was looking into Marlin to put on the machine, but", "don't have any experience on what to edit in the code to make", "I am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm on MacOS Sierra 10.12.5 using the 1.6.8 Arduino", "that works or editing the code to make it work for this machine.", "the code to make it work for this machine. Does anyone have any", "for this machine. I appreciate any help! Here is a link to [the", "firmware that was loaded on the machine wasn't very good. The x axis", "[Alunar M508 machine](https://www.alunar.net/m508-self-assembly-3d-printer.html) that I am trying to get new firmware on. The", "point was way off. I was looking into Marlin to put on the", "anyone have any experience with this machine? Uploading new firmware that works or", "or editing the code to make it work for this machine. I appreciate", "Marlin to put on the machine, but don't have any experience on what", "x axis was mirrored and the home point was way off. I was", "was loaded on the machine wasn't very good. The x axis was mirrored", "on the machine wasn't very good. The x axis was mirrored and the", "help! Here is a link to [the firmware I am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm", "mirrored and the home point was way off. I was looking into Marlin", "have any experience with this machine? Uploading new firmware that works or editing", "was way off. I was looking into Marlin to put on the machine,", "any experience on what to edit in the code to make it work", "the code to make it work for this machine. I appreciate any help!", "Does anyone have any experience with this machine? Uploading new firmware that works", "machine. I appreciate any help! Here is a link to [the firmware I", "that I am trying to get new firmware on. The firmware that was", "home point was way off. I was looking into Marlin to put on", "experience on what to edit in the code to make it work for", "experience with this machine? Uploading new firmware that works or editing the code", "Here is a link to [the firmware I am currently using](https://github.com/camalot/alunar-prusa-i3-marlin-i3-firmware). I'm on", "I appreciate any help! Here is a link to [the firmware I am", "code to make it work for this machine. Does anyone have any experience", "I was looking into Marlin to put on the machine, but don't have", "M508 machine](https://www.alunar.net/m508-self-assembly-3d-printer.html) that I am trying to get new firmware on. The firmware" ]
[ "anything special for printing TPU material e.g extruder or temperature? It's my first", "special for printing TPU material e.g extruder or temperature? It's my first time", "you have any photos, it would be great if you can share them.", "material, so if you have any photos, it would be great if you", "there anything special for printing TPU material e.g extruder or temperature? It's my", "Is there anything special for printing TPU material e.g extruder or temperature? It's", "so if you have any photos, it would be great if you can", "TPU material e.g extruder or temperature? It's my first time printing TPU material,", "It's my first time printing TPU material, so if you have any photos,", "first time printing TPU material, so if you have any photos, it would", "temperature? It's my first time printing TPU material, so if you have any", "e.g extruder or temperature? It's my first time printing TPU material, so if", "my first time printing TPU material, so if you have any photos, it", "printing TPU material e.g extruder or temperature? It's my first time printing TPU", "TPU material, so if you have any photos, it would be great if", "extruder or temperature? It's my first time printing TPU material, so if you", "printing TPU material, so if you have any photos, it would be great", "material e.g extruder or temperature? It's my first time printing TPU material, so", "or temperature? It's my first time printing TPU material, so if you have", "for printing TPU material e.g extruder or temperature? It's my first time printing", "time printing TPU material, so if you have any photos, it would be", "if you have any photos, it would be great if you can share" ]
[ "a 3d printer for a while now, and I have a lot of", "dialed in pretty well, but one thing that constantly bugs me is removing", "lot of the quality settings dialed in pretty well, but one thing that", "and I have set the air gap to 0.2 mm. That led to", "I have had a 3d printer for a while now, and I have", "to get easier to remove rafts? Does the filament affect this? I am", "raft from fusing with the layers on the part? Any help is greatly", "impossible to remove at all, but it is still not great. Are there", "3d printer for a while now, and I have a lot of the", "I have a lot of the quality settings dialed in pretty well, but", "settings I should look at changing to get easier to remove rafts? Does", "on the raft from fusing with the layers on the part? Any help", "finished prints. I am using Repetier and I have set the air gap", "am using Repetier and I have set the air gap to 0.2 mm.", "it is still not great. Are there any settings I should look at", "me is removing the raft from my finished prints. I am using Repetier", "pretty well, but one thing that constantly bugs me is removing the raft", "that did seem to help. Maybe it keeps the layers on the raft", "were impossible to remove at all, but it is still not great. Are", "there any settings I should look at changing to get easier to remove", "changing to get easier to remove rafts? Does the filament affect this? I", "am printing in Hatchbox PLA at high temps. I have a heated bed,", "for a while now, and I have a lot of the quality settings", "Hatchbox PLA at high temps. I have a heated bed, and reducing the", "temp on that did seem to help. Maybe it keeps the layers on", "the layers on the raft from fusing with the layers on the part?", "have a heated bed, and reducing the temp on that did seem to", "printing in Hatchbox PLA at high temps. I have a heated bed, and", "using Repetier and I have set the air gap to 0.2 mm. That", "led to much better results than the default 0, which were impossible to", "have had a 3d printer for a while now, and I have a", "and I have a lot of the quality settings dialed in pretty well,", "prints. I am using Repetier and I have set the air gap to", "filament affect this? I am printing in Hatchbox PLA at high temps. I", "much better results than the default 0, which were impossible to remove at", "set the air gap to 0.2 mm. That led to much better results", "from fusing with the layers on the part? Any help is greatly appreciated.", "affect this? I am printing in Hatchbox PLA at high temps. I have", "constantly bugs me is removing the raft from my finished prints. I am", "it keeps the layers on the raft from fusing with the layers on", "0.2 mm. That led to much better results than the default 0, which", "from my finished prints. I am using Repetier and I have set the", "printer for a while now, and I have a lot of the quality", "rafts? Does the filament affect this? I am printing in Hatchbox PLA at", "is removing the raft from my finished prints. I am using Repetier and", "temps. I have a heated bed, and reducing the temp on that did", "while now, and I have a lot of the quality settings dialed in", "0, which were impossible to remove at all, but it is still not", "seem to help. Maybe it keeps the layers on the raft from fusing", "have set the air gap to 0.2 mm. That led to much better", "the quality settings dialed in pretty well, but one thing that constantly bugs", "keeps the layers on the raft from fusing with the layers on the", "but one thing that constantly bugs me is removing the raft from my", "default 0, which were impossible to remove at all, but it is still", "air gap to 0.2 mm. That led to much better results than the", "still not great. Are there any settings I should look at changing to", "to remove rafts? Does the filament affect this? I am printing in Hatchbox", "a lot of the quality settings dialed in pretty well, but one thing", "I am using Repetier and I have set the air gap to 0.2", "look at changing to get easier to remove rafts? Does the filament affect", "to much better results than the default 0, which were impossible to remove", "results than the default 0, which were impossible to remove at all, but", "raft from my finished prints. I am using Repetier and I have set", "at all, but it is still not great. Are there any settings I", "the air gap to 0.2 mm. That led to much better results than", "better results than the default 0, which were impossible to remove at all,", "gap to 0.2 mm. That led to much better results than the default", "to 0.2 mm. That led to much better results than the default 0,", "that constantly bugs me is removing the raft from my finished prints. I", "I should look at changing to get easier to remove rafts? Does the", "layers on the raft from fusing with the layers on the part? Any", "to help. Maybe it keeps the layers on the raft from fusing with", "easier to remove rafts? Does the filament affect this? I am printing in", "remove at all, but it is still not great. Are there any settings", "bed, and reducing the temp on that did seem to help. Maybe it", "Repetier and I have set the air gap to 0.2 mm. That led", "high temps. I have a heated bed, and reducing the temp on that", "Maybe it keeps the layers on the raft from fusing with the layers", "had a 3d printer for a while now, and I have a lot", "the raft from my finished prints. I am using Repetier and I have", "now, and I have a lot of the quality settings dialed in pretty", "not great. Are there any settings I should look at changing to get", "That led to much better results than the default 0, which were impossible", "the filament affect this? I am printing in Hatchbox PLA at high temps.", "at changing to get easier to remove rafts? Does the filament affect this?", "a heated bed, and reducing the temp on that did seem to help.", "the temp on that did seem to help. Maybe it keeps the layers", "in Hatchbox PLA at high temps. I have a heated bed, and reducing", "to remove at all, but it is still not great. Are there any", "I have a heated bed, and reducing the temp on that did seem", "all, but it is still not great. Are there any settings I should", "the default 0, which were impossible to remove at all, but it is", "mm. That led to much better results than the default 0, which were", "one thing that constantly bugs me is removing the raft from my finished", "any settings I should look at changing to get easier to remove rafts?", "but it is still not great. Are there any settings I should look", "great. Are there any settings I should look at changing to get easier", "removing the raft from my finished prints. I am using Repetier and I", "thing that constantly bugs me is removing the raft from my finished prints.", "Does the filament affect this? I am printing in Hatchbox PLA at high", "bugs me is removing the raft from my finished prints. I am using", "remove rafts? Does the filament affect this? I am printing in Hatchbox PLA", "Are there any settings I should look at changing to get easier to", "quality settings dialed in pretty well, but one thing that constantly bugs me", "I have set the air gap to 0.2 mm. That led to much", "is still not great. Are there any settings I should look at changing", "I am printing in Hatchbox PLA at high temps. I have a heated", "help. Maybe it keeps the layers on the raft from fusing with the", "PLA at high temps. I have a heated bed, and reducing the temp", "get easier to remove rafts? Does the filament affect this? I am printing", "have a lot of the quality settings dialed in pretty well, but one", "did seem to help. Maybe it keeps the layers on the raft from", "fusing with the layers on the part? Any help is greatly appreciated. Thanks.", "on that did seem to help. Maybe it keeps the layers on the", "heated bed, and reducing the temp on that did seem to help. Maybe", "should look at changing to get easier to remove rafts? Does the filament", "in pretty well, but one thing that constantly bugs me is removing the", "than the default 0, which were impossible to remove at all, but it", "which were impossible to remove at all, but it is still not great.", "my finished prints. I am using Repetier and I have set the air", "settings dialed in pretty well, but one thing that constantly bugs me is", "a while now, and I have a lot of the quality settings dialed", "well, but one thing that constantly bugs me is removing the raft from", "of the quality settings dialed in pretty well, but one thing that constantly", "and reducing the temp on that did seem to help. Maybe it keeps", "at high temps. I have a heated bed, and reducing the temp on", "reducing the temp on that did seem to help. Maybe it keeps the", "the raft from fusing with the layers on the part? Any help is", "this? I am printing in Hatchbox PLA at high temps. I have a" ]
[ "bought a very cheap 3D printer. I'm using Cura as recomended, and wanted", "like this, and keep the details on each side?[![enter image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE", "pops, but the surface details are quite accurate enough to fit a PCB", "EE designer and software guy. We've been CNC'ing prototypes, and my office just", "to print a piece that has features on both sides. Here is a", "print an object like this, and keep the details on each side?[![enter image", "on both sides. Here is a screenshot of each side. So if you", "a 45 degree. Here are the results. Pretty good! The finish has some", "using Cura as recomended, and wanted to print a piece that has features", "software guy. We've been CNC'ing prototypes, and my office just bought a very", "way to 3D print an object like this, and keep the details on", "a very cheap 3D printer. I'm using Cura as recomended, and wanted to", "recomended, and wanted to print a piece that has features on both sides.", "details on each side?[![enter image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I copied some Cura settings", "designer and software guy. We've been CNC'ing prototypes, and my office just bought", "from guys and basically tipped this thing to a 45 degree. Here are", "guy. We've been CNC'ing prototypes, and my office just bought a very cheap", "laid one side flat, you see how there is a subtractive portion underneath", "here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I copied some Cura settings from guys and basically tipped this", "We've been CNC'ing prototypes, and my office just bought a very cheap 3D", "finish has some zits and pops, but the surface details are quite accurate", "to 3D print an object like this, and keep the details on each", "to fit a PCB board in there with confidence. [![enter image description here](https://i.stack.imgur.com/4jAWN.jpg)](https://i.stack.imgur.com/4jAWN.jpg)", "but the surface details are quite accurate enough to fit a PCB board", "image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I copied some Cura settings from guys and basically", "quite accurate enough to fit a PCB board in there with confidence. [![enter", "how there is a subtractive portion underneath it? Is there a way to", "UPDATE I copied some Cura settings from guys and basically tipped this thing", "screenshot of each side. So if you laid one side flat, you see", "So if you laid one side flat, you see how there is a", "just bought a very cheap 3D printer. I'm using Cura as recomended, and", "basically tipped this thing to a 45 degree. Here are the results. Pretty", "an object like this, and keep the details on each side?[![enter image description", "it? Is there a way to 3D print an object like this, and", "degree. Here are the results. Pretty good! The finish has some zits and", "on each side?[![enter image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I copied some Cura settings from", "if you laid one side flat, you see how there is a subtractive", "3D printer. I'm using Cura as recomended, and wanted to print a piece", "accurate enough to fit a PCB board in there with confidence. [![enter image", "of each side. So if you laid one side flat, you see how", "flat, you see how there is a subtractive portion underneath it? Is there", "subtractive portion underneath it? Is there a way to 3D print an object", "there a way to 3D print an object like this, and keep the", "keep the details on each side?[![enter image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I copied some", "are quite accurate enough to fit a PCB board in there with confidence.", "the results. Pretty good! The finish has some zits and pops, but the", "printer. I'm using Cura as recomended, and wanted to print a piece that", "and my office just bought a very cheap 3D printer. I'm using Cura", "each side. So if you laid one side flat, you see how there", "the details on each side?[![enter image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I copied some Cura", "as recomended, and wanted to print a piece that has features on both", "has some zits and pops, but the surface details are quite accurate enough", "portion underneath it? Is there a way to 3D print an object like", "copied some Cura settings from guys and basically tipped this thing to a", "this, and keep the details on each side?[![enter image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I", "Here is a screenshot of each side. So if you laid one side", "a piece that has features on both sides. Here is a screenshot of", "my office just bought a very cheap 3D printer. I'm using Cura as", "print a piece that has features on both sides. Here is a screenshot", "description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I copied some Cura settings from guys and basically tipped", "and wanted to print a piece that has features on both sides. Here", "features on both sides. Here is a screenshot of each side. So if", "I copied some Cura settings from guys and basically tipped this thing to", "sides. Here is a screenshot of each side. So if you laid one", "some Cura settings from guys and basically tipped this thing to a 45", "3D print an object like this, and keep the details on each side?[![enter", "side. So if you laid one side flat, you see how there is", "wanted to print a piece that has features on both sides. Here is", "you laid one side flat, you see how there is a subtractive portion", "and keep the details on each side?[![enter image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I copied", "a screenshot of each side. So if you laid one side flat, you", "45 degree. Here are the results. Pretty good! The finish has some zits", "guys and basically tipped this thing to a 45 degree. Here are the", "prototypes, and my office just bought a very cheap 3D printer. I'm using", "some zits and pops, but the surface details are quite accurate enough to", "results. Pretty good! The finish has some zits and pops, but the surface", "Here are the results. Pretty good! The finish has some zits and pops,", "very cheap 3D printer. I'm using Cura as recomended, and wanted to print", "one side flat, you see how there is a subtractive portion underneath it?", "piece that has features on both sides. Here is a screenshot of each", "I'm a EE designer and software guy. We've been CNC'ing prototypes, and my", "object like this, and keep the details on each side?[![enter image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg)", "a EE designer and software guy. We've been CNC'ing prototypes, and my office", "side?[![enter image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I copied some Cura settings from guys and", "this thing to a 45 degree. Here are the results. Pretty good! The", "details are quite accurate enough to fit a PCB board in there with", "a way to 3D print an object like this, and keep the details", "Is there a way to 3D print an object like this, and keep", "Apologies, I'm a EE designer and software guy. We've been CNC'ing prototypes, and", "cheap 3D printer. I'm using Cura as recomended, and wanted to print a", "settings from guys and basically tipped this thing to a 45 degree. Here", "thing to a 45 degree. Here are the results. Pretty good! The finish", "and software guy. We've been CNC'ing prototypes, and my office just bought a", "both sides. Here is a screenshot of each side. So if you laid", "Cura as recomended, and wanted to print a piece that has features on", "side flat, you see how there is a subtractive portion underneath it? Is", "surface details are quite accurate enough to fit a PCB board in there", "enough to fit a PCB board in there with confidence. [![enter image description", "The finish has some zits and pops, but the surface details are quite", "CNC'ing prototypes, and my office just bought a very cheap 3D printer. I'm", "is a subtractive portion underneath it? Is there a way to 3D print", "Cura settings from guys and basically tipped this thing to a 45 degree.", "a subtractive portion underneath it? Is there a way to 3D print an", "there is a subtractive portion underneath it? Is there a way to 3D", "are the results. Pretty good! The finish has some zits and pops, but", "the surface details are quite accurate enough to fit a PCB board in", "Pretty good! The finish has some zits and pops, but the surface details", "has features on both sides. Here is a screenshot of each side. So", "see how there is a subtractive portion underneath it? Is there a way", "that has features on both sides. Here is a screenshot of each side.", "to a 45 degree. Here are the results. Pretty good! The finish has", "I'm using Cura as recomended, and wanted to print a piece that has", "and basically tipped this thing to a 45 degree. Here are the results.", "office just bought a very cheap 3D printer. I'm using Cura as recomended,", "is a screenshot of each side. So if you laid one side flat,", "zits and pops, but the surface details are quite accurate enough to fit", "tipped this thing to a 45 degree. Here are the results. Pretty good!", "good! The finish has some zits and pops, but the surface details are", "and pops, but the surface details are quite accurate enough to fit a", "you see how there is a subtractive portion underneath it? Is there a", "each side?[![enter image description here](https://i.stack.imgur.com/G2T54.jpg)](https://i.stack.imgur.com/G2T54.jpg) UPDATE I copied some Cura settings from guys", "underneath it? Is there a way to 3D print an object like this,", "been CNC'ing prototypes, and my office just bought a very cheap 3D printer." ]
[ "to design parts to be 3d-printed. I've noticed that if I'm making an", "making an assembly, where one part has features that touch other parts, then", "assembly has coincident or interfering geometry that may be unsuitable for some rapid", "[Here is a very simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you can see this phenomenon.", "for some rapid prototyping systems.\" If I save it, then this STL later", "this phenomenon. Part 1 is just a simple cube, and part 2 is", "like to be able to print my assemblies. [Here is a very simple", "do? I'd like to be able to print my assemblies. [Here is a", "Solidworks to design parts to be 3d-printed. I've noticed that if I'm making", "I'll get a dialog from Solidworks saying \"This assembly has coincident or interfering", "assembly, where one part has features that touch other parts, then when I", "where you can see this phenomenon. Part 1 is just a simple cube,", "other parts, then when I try to save that assembly as an STL", "simple cube, and part 2 is another simple cube that is flush with", "when I try to save that assembly as an STL for printing, I'll", "print my assemblies. [Here is a very simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you can", "then when I try to save that assembly as an STL for printing,", "a very simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you can see this phenomenon. Part 1", "to print it. What can I do? I'd like to be able to", "prototyping systems.\" If I save it, then this STL later causes problems when", "noticed that if I'm making an assembly, where one part has features that", "1 is just a simple cube, and part 2 is another simple cube", "be unsuitable for some rapid prototyping systems.\" If I save it, then this", "assemblies. [Here is a very simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you can see this", "has features that touch other parts, then when I try to save that", "I try to save that assembly as an STL for printing, I'll get", "dialog from Solidworks saying \"This assembly has coincident or interfering geometry that may", "print it. What can I do? I'd like to be able to print", "it, then this STL later causes problems when trying to print it. What", "I'd like to be able to print my assemblies. [Here is a very", "simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you can see this phenomenon. Part 1 is just", "systems.\" If I save it, then this STL later causes problems when trying", "rapid prototyping systems.\" If I save it, then this STL later causes problems", "parts, then when I try to save that assembly as an STL for", "an assembly, where one part has features that touch other parts, then when", "using Solidworks to design parts to be 3d-printed. I've noticed that if I'm", "What can I do? I'd like to be able to print my assemblies.", "coincident or interfering geometry that may be unsuitable for some rapid prototyping systems.\"", "trying to print it. What can I do? I'd like to be able", "Solidworks saying \"This assembly has coincident or interfering geometry that may be unsuitable", "is just a simple cube, and part 2 is another simple cube that", "it. What can I do? I'd like to be able to print my", "I do? I'd like to be able to print my assemblies. [Here is", "to be 3d-printed. I've noticed that if I'm making an assembly, where one", "Part 1 is just a simple cube, and part 2 is another simple", "where one part has features that touch other parts, then when I try", "very simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you can see this phenomenon. Part 1 is", "design parts to be 3d-printed. I've noticed that if I'm making an assembly,", "able to print my assemblies. [Here is a very simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where", "I save it, then this STL later causes problems when trying to print", "3d-printed. I've noticed that if I'm making an assembly, where one part has", "that assembly as an STL for printing, I'll get a dialog from Solidworks", "phenomenon. Part 1 is just a simple cube, and part 2 is another", "problems when trying to print it. What can I do? I'd like to", "touch other parts, then when I try to save that assembly as an", "an STL for printing, I'll get a dialog from Solidworks saying \"This assembly", "get a dialog from Solidworks saying \"This assembly has coincident or interfering geometry", "cube, and part 2 is another simple cube that is flush with part", "that touch other parts, then when I try to save that assembly as", "a simple cube, and part 2 is another simple cube that is flush", "if I'm making an assembly, where one part has features that touch other", "is a very simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you can see this phenomenon. Part", "I've noticed that if I'm making an assembly, where one part has features", "you can see this phenomenon. Part 1 is just a simple cube, and", "be 3d-printed. I've noticed that if I'm making an assembly, where one part", "I'm using Solidworks to design parts to be 3d-printed. I've noticed that if", "save it, then this STL later causes problems when trying to print it.", "to be able to print my assemblies. [Here is a very simple example", "just a simple cube, and part 2 is another simple cube that is", "part has features that touch other parts, then when I try to save", "be able to print my assemblies. [Here is a very simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0)", "then this STL later causes problems when trying to print it. What can", "assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you can see this phenomenon. Part 1 is just a simple", "I'm making an assembly, where one part has features that touch other parts,", "my assemblies. [Here is a very simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you can see", "a dialog from Solidworks saying \"This assembly has coincident or interfering geometry that", "when trying to print it. What can I do? I'd like to be", "can see this phenomenon. Part 1 is just a simple cube, and part", "If I save it, then this STL later causes problems when trying to", "printing, I'll get a dialog from Solidworks saying \"This assembly has coincident or", "some rapid prototyping systems.\" If I save it, then this STL later causes", "may be unsuitable for some rapid prototyping systems.\" If I save it, then", "one part has features that touch other parts, then when I try to", "assembly as an STL for printing, I'll get a dialog from Solidworks saying", "as an STL for printing, I'll get a dialog from Solidworks saying \"This", "to print my assemblies. [Here is a very simple example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you", "has coincident or interfering geometry that may be unsuitable for some rapid prototyping", "see this phenomenon. Part 1 is just a simple cube, and part 2", "and part 2 is another simple cube that is flush with part 1.", "interfering geometry that may be unsuitable for some rapid prototyping systems.\" If I", "this STL later causes problems when trying to print it. What can I", "later causes problems when trying to print it. What can I do? I'd", "can I do? I'd like to be able to print my assemblies. [Here", "or interfering geometry that may be unsuitable for some rapid prototyping systems.\" If", "STL for printing, I'll get a dialog from Solidworks saying \"This assembly has", "causes problems when trying to print it. What can I do? I'd like", "that if I'm making an assembly, where one part has features that touch", "from Solidworks saying \"This assembly has coincident or interfering geometry that may be", "unsuitable for some rapid prototyping systems.\" If I save it, then this STL", "geometry that may be unsuitable for some rapid prototyping systems.\" If I save", "features that touch other parts, then when I try to save that assembly", "example assembly](https://www.dropbox.com/s/q6fpzxcpwbmb48o/Interference%20test.SLDASM?dl=0) where you can see this phenomenon. Part 1 is just a", "that may be unsuitable for some rapid prototyping systems.\" If I save it,", "\"This assembly has coincident or interfering geometry that may be unsuitable for some", "save that assembly as an STL for printing, I'll get a dialog from", "try to save that assembly as an STL for printing, I'll get a", "parts to be 3d-printed. I've noticed that if I'm making an assembly, where", "to save that assembly as an STL for printing, I'll get a dialog", "STL later causes problems when trying to print it. What can I do?", "for printing, I'll get a dialog from Solidworks saying \"This assembly has coincident", "saying \"This assembly has coincident or interfering geometry that may be unsuitable for" ]