ngram
listlengths 0
10.5k
|
|---|
[
"just finished assembling my printer and I plug it into my computer with",
"3d printing world. I just finished assembling my printer and I plug it",
"plug it into my computer with the included usb cable and nothing happens.",
"being plugged in but it just says \"unrecognized device in com 4\". Nothing",
"and nothing happens. My computer does recognize the printer being plugged in but",
"world. I just finished assembling my printer and I plug it into my",
"and I plug it into my computer with the included usb cable and",
"comes to the 3d printing world. I just finished assembling my printer and",
"recognize the printer being plugged in but it just says \"unrecognized device in",
"the included usb cable and nothing happens. My computer does recognize the printer",
"Nothing else past that. Somebody please help me with the following steps that",
"me with the following steps that need to be taken to get my",
"the printer being plugged in but it just says \"unrecognized device in com",
"included usb cable and nothing happens. My computer does recognize the printer being",
"\"unrecognized device in com 4\". Nothing else past that. Somebody please help me",
"a complete noob when it comes to the 3d printing world. I just",
"complete noob when it comes to the 3d printing world. I just finished",
"but it just says \"unrecognized device in com 4\". Nothing else past that.",
"when it comes to the 3d printing world. I just finished assembling my",
"assembling my printer and I plug it into my computer with the included",
"I am a complete noob when it comes to the 3d printing world.",
"the 3d printing world. I just finished assembling my printer and I plug",
"printer and I plug it into my computer with the included usb cable",
"into my computer with the included usb cable and nothing happens. My computer",
"just says \"unrecognized device in com 4\". Nothing else past that. Somebody please",
"past that. Somebody please help me with the following steps that need to",
"that. Somebody please help me with the following steps that need to be",
"Somebody please help me with the following steps that need to be taken",
"My computer does recognize the printer being plugged in but it just says",
"am a complete noob when it comes to the 3d printing world. I",
"computer with the included usb cable and nothing happens. My computer does recognize",
"usb cable and nothing happens. My computer does recognize the printer being plugged",
"computer does recognize the printer being plugged in but it just says \"unrecognized",
"says \"unrecognized device in com 4\". Nothing else past that. Somebody please help",
"I plug it into my computer with the included usb cable and nothing",
"I just finished assembling my printer and I plug it into my computer",
"help me with the following steps that need to be taken to get",
"it comes to the 3d printing world. I just finished assembling my printer",
"cable and nothing happens. My computer does recognize the printer being plugged in",
"printer being plugged in but it just says \"unrecognized device in com 4\".",
"following steps that need to be taken to get my CPU talking with",
"with the following steps that need to be taken to get my CPU",
"printing world. I just finished assembling my printer and I plug it into",
"happens. My computer does recognize the printer being plugged in but it just",
"does recognize the printer being plugged in but it just says \"unrecognized device",
"to the 3d printing world. I just finished assembling my printer and I",
"finished assembling my printer and I plug it into my computer with the",
"nothing happens. My computer does recognize the printer being plugged in but it",
"else past that. Somebody please help me with the following steps that need",
"steps that need to be taken to get my CPU talking with my",
"plugged in but it just says \"unrecognized device in com 4\". Nothing else",
"with the included usb cable and nothing happens. My computer does recognize the",
"my printer and I plug it into my computer with the included usb",
"that need to be taken to get my CPU talking with my printer.",
"it just says \"unrecognized device in com 4\". Nothing else past that. Somebody",
"the following steps that need to be taken to get my CPU talking",
"my computer with the included usb cable and nothing happens. My computer does",
"please help me with the following steps that need to be taken to",
"com 4\". Nothing else past that. Somebody please help me with the following",
"in but it just says \"unrecognized device in com 4\". Nothing else past",
"noob when it comes to the 3d printing world. I just finished assembling",
"in com 4\". Nothing else past that. Somebody please help me with the",
"it into my computer with the included usb cable and nothing happens. My",
"device in com 4\". Nothing else past that. Somebody please help me with",
"4\". Nothing else past that. Somebody please help me with the following steps"
] |
[
"3D printing, what raw material should I choose – PLA, ABS, HIPS etc.",
"injection mold (for resin based raw material) using 3D printing, what raw material",
"resin based raw material) using 3D printing, what raw material should I choose",
"raw material) using 3D printing, what raw material should I choose – PLA,",
"I have to make an injection mold (for resin based raw material) using",
"have to make an injection mold (for resin based raw material) using 3D",
"If I have to make an injection mold (for resin based raw material)",
"to make an injection mold (for resin based raw material) using 3D printing,",
"an injection mold (for resin based raw material) using 3D printing, what raw",
"make an injection mold (for resin based raw material) using 3D printing, what",
"(for resin based raw material) using 3D printing, what raw material should I",
"material) using 3D printing, what raw material should I choose – PLA, ABS,",
"mold (for resin based raw material) using 3D printing, what raw material should",
"using 3D printing, what raw material should I choose – PLA, ABS, HIPS",
"based raw material) using 3D printing, what raw material should I choose –"
] |
[
"My main application for my 3D printer (Zortrax M200 Plus) is making 28",
"happy with those. So I am looking for other software to edit .STL",
"to remove. I had a bit more luck creating support structures with Meshmixer,",
".STL files to add supports automatically, preferably with an option to edit those",
"impossible to remove. I had a bit more luck creating support structures with",
"few millimeters thick. If I use the automatically generated supports of the Z-Suite",
"those. So I am looking for other software to edit .STL files to",
"the supports end up being thicker than the model parts, and are impossible",
"software to edit .STL files to add supports automatically, preferably with an option",
"of the Z-Suite software, the supports end up being thicker than the model",
"role-playing games. Basically people and animals at 1:60 scale, which means that things",
"edit .STL files to add supports automatically, preferably with an option to edit",
"that adds the support also needs to be able to export the model",
"are only a few millimeters thick. If I use the automatically generated supports",
"making 28 mm scale miniatures for role-playing games. Basically people and animals at",
"Basically people and animals at 1:60 scale, which means that things like arms,",
"miniatures for role-playing games. Basically people and animals at 1:60 scale, which means",
"add supports automatically, preferably with an option to edit those support structures easily",
"up being thicker than the model parts, and are impossible to remove. I",
"structures with Meshmixer, but am not totally happy with those. So I am",
"only a few millimeters thick. If I use the automatically generated supports of",
"remove. I had a bit more luck creating support structures with Meshmixer, but",
"with those. So I am looking for other software to edit .STL files",
"Z-Suite software, so the software that adds the support also needs to be",
"things like arms, legs, or weapons are only a few millimeters thick. If",
"which means that things like arms, legs, or weapons are only a few",
"games. Basically people and animals at 1:60 scale, which means that things like",
"to export the model with the supports into an STL file, not just",
"means that things like arms, legs, or weapons are only a few millimeters",
"those support structures easily afterwards. Any ideas? Note that Zortrax printers only work",
"a few millimeters thick. If I use the automatically generated supports of the",
"software, the supports end up being thicker than the model parts, and are",
"for role-playing games. Basically people and animals at 1:60 scale, which means that",
"Z-Suite software, the supports end up being thicker than the model parts, and",
"animals at 1:60 scale, which means that things like arms, legs, or weapons",
"supports automatically, preferably with an option to edit those support structures easily afterwards.",
"people and animals at 1:60 scale, which means that things like arms, legs,",
"arms, legs, or weapons are only a few millimeters thick. If I use",
"Note that Zortrax printers only work with proprietary Z-Suite software, so the software",
"more luck creating support structures with Meshmixer, but am not totally happy with",
"scale, which means that things like arms, legs, or weapons are only a",
"that Zortrax printers only work with proprietary Z-Suite software, so the software that",
"automatically, preferably with an option to edit those support structures easily afterwards. Any",
"proprietary Z-Suite software, so the software that adds the support also needs to",
"being thicker than the model parts, and are impossible to remove. I had",
"export the model with the supports into an STL file, not just gcode.",
"creating support structures with Meshmixer, but am not totally happy with those. So",
"software, so the software that adds the support also needs to be able",
"also needs to be able to export the model with the supports into",
"Plus) is making 28 mm scale miniatures for role-playing games. Basically people and",
"scale miniatures for role-playing games. Basically people and animals at 1:60 scale, which",
"easily afterwards. Any ideas? Note that Zortrax printers only work with proprietary Z-Suite",
"1:60 scale, which means that things like arms, legs, or weapons are only",
"legs, or weapons are only a few millimeters thick. If I use the",
"use the automatically generated supports of the Z-Suite software, the supports end up",
"able to export the model with the supports into an STL file, not",
"an option to edit those support structures easily afterwards. Any ideas? Note that",
"mm scale miniatures for role-playing games. Basically people and animals at 1:60 scale,",
"supports end up being thicker than the model parts, and are impossible to",
"millimeters thick. If I use the automatically generated supports of the Z-Suite software,",
"the model parts, and are impossible to remove. I had a bit more",
"printer (Zortrax M200 Plus) is making 28 mm scale miniatures for role-playing games.",
"luck creating support structures with Meshmixer, but am not totally happy with those.",
"with Meshmixer, but am not totally happy with those. So I am looking",
"If I use the automatically generated supports of the Z-Suite software, the supports",
"or weapons are only a few millimeters thick. If I use the automatically",
"weapons are only a few millimeters thick. If I use the automatically generated",
"work with proprietary Z-Suite software, so the software that adds the support also",
"a bit more luck creating support structures with Meshmixer, but am not totally",
"than the model parts, and are impossible to remove. I had a bit",
"ideas? Note that Zortrax printers only work with proprietary Z-Suite software, so the",
"at 1:60 scale, which means that things like arms, legs, or weapons are",
"that things like arms, legs, or weapons are only a few millimeters thick.",
"am looking for other software to edit .STL files to add supports automatically,",
"adds the support also needs to be able to export the model with",
"for other software to edit .STL files to add supports automatically, preferably with",
"So I am looking for other software to edit .STL files to add",
"main application for my 3D printer (Zortrax M200 Plus) is making 28 mm",
"had a bit more luck creating support structures with Meshmixer, but am not",
"preferably with an option to edit those support structures easily afterwards. Any ideas?",
"with proprietary Z-Suite software, so the software that adds the support also needs",
"like arms, legs, or weapons are only a few millimeters thick. If I",
"to add supports automatically, preferably with an option to edit those support structures",
"other software to edit .STL files to add supports automatically, preferably with an",
"M200 Plus) is making 28 mm scale miniatures for role-playing games. Basically people",
"I use the automatically generated supports of the Z-Suite software, the supports end",
"model parts, and are impossible to remove. I had a bit more luck",
"am not totally happy with those. So I am looking for other software",
"bit more luck creating support structures with Meshmixer, but am not totally happy",
"Any ideas? Note that Zortrax printers only work with proprietary Z-Suite software, so",
"support structures easily afterwards. Any ideas? Note that Zortrax printers only work with",
"option to edit those support structures easily afterwards. Any ideas? Note that Zortrax",
"Zortrax printers only work with proprietary Z-Suite software, so the software that adds",
"with an option to edit those support structures easily afterwards. Any ideas? Note",
"edit those support structures easily afterwards. Any ideas? Note that Zortrax printers only",
"to edit those support structures easily afterwards. Any ideas? Note that Zortrax printers",
"support structures with Meshmixer, but am not totally happy with those. So I",
"the software that adds the support also needs to be able to export",
"printers only work with proprietary Z-Suite software, so the software that adds the",
"automatically generated supports of the Z-Suite software, the supports end up being thicker",
"are impossible to remove. I had a bit more luck creating support structures",
"3D printer (Zortrax M200 Plus) is making 28 mm scale miniatures for role-playing",
"to edit .STL files to add supports automatically, preferably with an option to",
"to be able to export the model with the supports into an STL",
"the support also needs to be able to export the model with the",
"Meshmixer, but am not totally happy with those. So I am looking for",
"thick. If I use the automatically generated supports of the Z-Suite software, the",
"software that adds the support also needs to be able to export the",
"afterwards. Any ideas? Note that Zortrax printers only work with proprietary Z-Suite software,",
"(Zortrax M200 Plus) is making 28 mm scale miniatures for role-playing games. Basically",
"end up being thicker than the model parts, and are impossible to remove.",
"but am not totally happy with those. So I am looking for other",
"support also needs to be able to export the model with the supports",
"application for my 3D printer (Zortrax M200 Plus) is making 28 mm scale",
"only work with proprietary Z-Suite software, so the software that adds the support",
"needs to be able to export the model with the supports into an",
"parts, and are impossible to remove. I had a bit more luck creating",
"I had a bit more luck creating support structures with Meshmixer, but am",
"28 mm scale miniatures for role-playing games. Basically people and animals at 1:60",
"my 3D printer (Zortrax M200 Plus) is making 28 mm scale miniatures for",
"and animals at 1:60 scale, which means that things like arms, legs, or",
"and are impossible to remove. I had a bit more luck creating support",
"looking for other software to edit .STL files to add supports automatically, preferably",
"thicker than the model parts, and are impossible to remove. I had a",
"for my 3D printer (Zortrax M200 Plus) is making 28 mm scale miniatures",
"the automatically generated supports of the Z-Suite software, the supports end up being",
"the Z-Suite software, the supports end up being thicker than the model parts,",
"so the software that adds the support also needs to be able to",
"I am looking for other software to edit .STL files to add supports",
"totally happy with those. So I am looking for other software to edit",
"structures easily afterwards. Any ideas? Note that Zortrax printers only work with proprietary",
"not totally happy with those. So I am looking for other software to",
"files to add supports automatically, preferably with an option to edit those support",
"supports of the Z-Suite software, the supports end up being thicker than the",
"be able to export the model with the supports into an STL file,",
"generated supports of the Z-Suite software, the supports end up being thicker than",
"is making 28 mm scale miniatures for role-playing games. Basically people and animals"
] |
[
"I am getting a thermal runout. The pla is hard, I don't want",
"180, but I am getting a thermal runout. The pla is hard, I",
"runout. The pla is hard, I don't want to broke the throat. [](https://i.stack.imgur.com/jC20j.jpg)",
"print popped out from the bed and glued to the nozzle. As the",
"the best way to remove pla from the nozzle without overheating wires? ------------------------------------------------------------------------------------------------",
"and glued to the nozzle. As the printer was printing next hour or",
"remark: was trying to heat the nozzle over 180, but I am getting",
"popped out from the bed and glued to the nozzle. As the printer",
"be the best way to remove pla from the nozzle without overheating wires?",
"to heat the nozzle over 180, but I am getting a thermal runout.",
"was printing next hour or so, a lot of pla was extruded and",
"and formed on the nozzle. I'm wondering what will be the best way",
"pla from the nozzle without overheating wires? ------------------------------------------------------------------------------------------------ a remark: was trying to",
"the nozzle. As the printer was printing next hour or so, a lot",
"printing next hour or so, a lot of pla was extruded and formed",
"was extruded and formed on the nozzle. I'm wondering what will be the",
"to the nozzle. As the printer was printing next hour or so, a",
"heat the nozzle over 180, but I am getting a thermal runout. The",
"trying to heat the nozzle over 180, but I am getting a thermal",
"wires? ------------------------------------------------------------------------------------------------ a remark: was trying to heat the nozzle over 180, but",
"on the nozzle. I'm wondering what will be the best way to remove",
"printer was printing next hour or so, a lot of pla was extruded"
] |
[
"effective way to shred the plastic into smaller bits for the extrude to",
"to re-use my failed prints by re-extruding the plastic to be used in",
"shred the plastic into smaller bits for the extrude to use. What is",
"would love to re-use my failed prints by re-extruding the plastic to be",
"way is finding an effective way to shred the plastic into smaller bits",
"the plastic to be used in the 3D printer once again. One thing",
"prints by re-extruding the plastic to be used in the 3D printer once",
"finding an effective way to shred the plastic into smaller bits for the",
"bits for the extrude to use. What is a good thing to look",
"What is a good thing to look for to accomplish this? Maybe a",
"extrude to use. What is a good thing to look for to accomplish",
"is finding an effective way to shred the plastic into smaller bits for",
"to shred the plastic into smaller bits for the extrude to use. What",
"stands in my way is finding an effective way to shred the plastic",
"a good thing to look for to accomplish this? Maybe a really big",
"I would love to re-use my failed prints by re-extruding the plastic to",
"the extrude to use. What is a good thing to look for to",
"to use. What is a good thing to look for to accomplish this?",
"3D printer once again. One thing that stands in my way is finding",
"failed prints by re-extruding the plastic to be used in the 3D printer",
"again. One thing that stands in my way is finding an effective way",
"way to shred the plastic into smaller bits for the extrude to use.",
"to be used in the 3D printer once again. One thing that stands",
"an effective way to shred the plastic into smaller bits for the extrude",
"plastic into smaller bits for the extrude to use. What is a good",
"in my way is finding an effective way to shred the plastic into",
"the plastic into smaller bits for the extrude to use. What is a",
"for the extrude to use. What is a good thing to look for",
"thing that stands in my way is finding an effective way to shred",
"smaller bits for the extrude to use. What is a good thing to",
"One thing that stands in my way is finding an effective way to",
"re-use my failed prints by re-extruding the plastic to be used in the",
"thing to look for to accomplish this? Maybe a really big 'paper' shredder?",
"plastic to be used in the 3D printer once again. One thing that",
"the 3D printer once again. One thing that stands in my way is",
"into smaller bits for the extrude to use. What is a good thing",
"is a good thing to look for to accomplish this? Maybe a really",
"re-extruding the plastic to be used in the 3D printer once again. One",
"by re-extruding the plastic to be used in the 3D printer once again.",
"printer once again. One thing that stands in my way is finding an",
"my failed prints by re-extruding the plastic to be used in the 3D",
"my way is finding an effective way to shred the plastic into smaller",
"love to re-use my failed prints by re-extruding the plastic to be used",
"use. What is a good thing to look for to accomplish this? Maybe",
"in the 3D printer once again. One thing that stands in my way",
"used in the 3D printer once again. One thing that stands in my",
"once again. One thing that stands in my way is finding an effective",
"good thing to look for to accomplish this? Maybe a really big 'paper'",
"that stands in my way is finding an effective way to shred the",
"be used in the 3D printer once again. One thing that stands in"
] |
[
"but that all doesn't help me. Almost everyone is saying that I just",
"44 #endif #else #define E0_STEP_PIN 26 #define E0_DIR_PIN 28 #define E0_ENABLE_PIN 24 #ifndef",
"of code snippet\")](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\") Here is the actual code: ```",
"Here is the actual code: ``` #if ENABLED(EXTRUDER_USE_E1) #define E0_STEP_PIN 36 #define E0_DIR_PIN",
"#ifndef E1_CS_PIN #define E1_CS_PIN 44 #endif #endif ``` I've already tried everything that",
"26 #define E0_DIR_PIN 28 #define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN #define E0_CS_PIN 42 #endif",
"&& DISABLED(EXTRUDER_USE_E1) #define E1_STEP_PIN 36 #define E1_DIR_PIN 34 #define E1_ENABLE_PIN 30 #ifndef E1_CS_PIN",
"tells me to do to solve this problem, but that all doesn't help",
"34 #define E0_ENABLE_PIN 30 #ifndef E0_CS_PIN #define E0_CS_PIN 44 #endif #else #define E0_STEP_PIN",
"these lines of code and it will work, but it's not working. Any",
"problem, but that all doesn't help me. Almost everyone is saying that I",
"E1_CS_PIN 44 #endif #endif ``` I've already tried everything that the online community",
"me. Almost everyone is saying that I just have to swap these lines",
"everyone is saying that I just have to swap these lines of code",
"working. Any ideas ? By the way E0 is not working because I've",
"E1_STEP_PIN 36 #define E1_DIR_PIN 34 #define E1_ENABLE_PIN 30 #ifndef E1_CS_PIN #define E1_CS_PIN 44",
"do to solve this problem, but that all doesn't help me. Almost everyone",
"E0_ENABLE_PIN 30 #ifndef E0_CS_PIN #define E0_CS_PIN 44 #endif #else #define E0_STEP_PIN 26 #define",
"#endif #endif #if DISABLED(X_AXIS_USE_E1) && DISABLED(Y_AXIS_USE_E1) && DISABLED(Z_AXIS_USE_E1) && DISABLED(EXTRUDER_USE_E1) #define E1_STEP_PIN 36",
"&& DISABLED(Z_AXIS_USE_E1) && DISABLED(EXTRUDER_USE_E1) #define E1_STEP_PIN 36 #define E1_DIR_PIN 34 #define E1_ENABLE_PIN 30",
"this problem, but that all doesn't help me. Almost everyone is saying that",
"#endif #if DISABLED(X_AXIS_USE_E1) && DISABLED(Y_AXIS_USE_E1) && DISABLED(Z_AXIS_USE_E1) && DISABLED(EXTRUDER_USE_E1) #define E1_STEP_PIN 36 #define",
"swap these lines of code and it will work, but it's not working.",
"all doesn't help me. Almost everyone is saying that I just have to",
"just have to swap these lines of code and it will work, but",
"24 #ifndef E0_CS_PIN #define E0_CS_PIN 42 #endif #endif #if DISABLED(X_AXIS_USE_E1) && DISABLED(Y_AXIS_USE_E1) &&",
"#endif #else #define E0_STEP_PIN 26 #define E0_DIR_PIN 28 #define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN",
"solve this problem, but that all doesn't help me. Almost everyone is saying",
"E0_DIR_PIN 34 #define E0_ENABLE_PIN 30 #ifndef E0_CS_PIN #define E0_CS_PIN 44 #endif #else #define",
"actual code: ``` #if ENABLED(EXTRUDER_USE_E1) #define E0_STEP_PIN 36 #define E0_DIR_PIN 34 #define E0_ENABLE_PIN",
"me to do to solve this problem, but that all doesn't help me.",
"the way E0 is not working because I've burnt a pot on it",
"#define E0_CS_PIN 44 #endif #else #define E0_STEP_PIN 26 #define E0_DIR_PIN 28 #define E0_ENABLE_PIN",
"to swap these lines of code and it will work, but it's not",
"#endif ``` I've already tried everything that the online community tells me to",
"snippet\") Here is the actual code: ``` #if ENABLED(EXTRUDER_USE_E1) #define E0_STEP_PIN 36 #define",
"code snippet\")](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\") Here is the actual code: ``` #if",
"the online community tells me to do to solve this problem, but that",
"at the following code, from [Line 139](https://github.com/JimBrown/MarlinTarantula/blob/2ce73937f3c57aac28a8d5f11a6ed9135a27cdca/Marlin/pins_RAMPS.h#L139), [pins\\_RAMPS.h](https://github.com/JimBrown/MarlinTarantula/blob/2ce73937f3c57aac28a8d5f11a6ed9135a27cdca/Marlin/pins_RAMPS.h) [![Screenshot of code snippet](https://i.stack.imgur.com/ufVqI.png \"Screenshot",
"doesn't help me. Almost everyone is saying that I just have to swap",
"``` #if ENABLED(EXTRUDER_USE_E1) #define E0_STEP_PIN 36 #define E0_DIR_PIN 34 #define E0_ENABLE_PIN 30 #ifndef",
"following code, from [Line 139](https://github.com/JimBrown/MarlinTarantula/blob/2ce73937f3c57aac28a8d5f11a6ed9135a27cdca/Marlin/pins_RAMPS.h#L139), [pins\\_RAMPS.h](https://github.com/JimBrown/MarlinTarantula/blob/2ce73937f3c57aac28a8d5f11a6ed9135a27cdca/Marlin/pins_RAMPS.h) [![Screenshot of code snippet](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code",
"Almost everyone is saying that I just have to swap these lines of",
"it will work, but it's not working. Any ideas ? By the way",
"\"Screenshot of code snippet\")](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\") Here is the actual code:",
"DISABLED(EXTRUDER_USE_E1) #define E1_STEP_PIN 36 #define E1_DIR_PIN 34 #define E1_ENABLE_PIN 30 #ifndef E1_CS_PIN #define",
"[![Screenshot of code snippet](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\")](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\") Here",
"code and it will work, but it's not working. Any ideas ? By",
"\"Screenshot of code snippet\") Here is the actual code: ``` #if ENABLED(EXTRUDER_USE_E1) #define",
"work, but it's not working. Any ideas ? By the way E0 is",
"of code snippet\") Here is the actual code: ``` #if ENABLED(EXTRUDER_USE_E1) #define E0_STEP_PIN",
"DISABLED(X_AXIS_USE_E1) && DISABLED(Y_AXIS_USE_E1) && DISABLED(Z_AXIS_USE_E1) && DISABLED(EXTRUDER_USE_E1) #define E1_STEP_PIN 36 #define E1_DIR_PIN 34",
"I've already tried everything that the online community tells me to do to",
"online community tells me to do to solve this problem, but that all",
"139](https://github.com/JimBrown/MarlinTarantula/blob/2ce73937f3c57aac28a8d5f11a6ed9135a27cdca/Marlin/pins_RAMPS.h#L139), [pins\\_RAMPS.h](https://github.com/JimBrown/MarlinTarantula/blob/2ce73937f3c57aac28a8d5f11a6ed9135a27cdca/Marlin/pins_RAMPS.h) [![Screenshot of code snippet](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\")](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code",
"already tried everything that the online community tells me to do to solve",
"E0_DIR_PIN 28 #define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN #define E0_CS_PIN 42 #endif #endif #if",
"but it's not working. Any ideas ? By the way E0 is not",
"code, from [Line 139](https://github.com/JimBrown/MarlinTarantula/blob/2ce73937f3c57aac28a8d5f11a6ed9135a27cdca/Marlin/pins_RAMPS.h#L139), [pins\\_RAMPS.h](https://github.com/JimBrown/MarlinTarantula/blob/2ce73937f3c57aac28a8d5f11a6ed9135a27cdca/Marlin/pins_RAMPS.h) [![Screenshot of code snippet](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\")](https://i.stack.imgur.com/ufVqI.png",
"36 #define E0_DIR_PIN 34 #define E0_ENABLE_PIN 30 #ifndef E0_CS_PIN #define E0_CS_PIN 44 #endif",
"E1_ENABLE_PIN 30 #ifndef E1_CS_PIN #define E1_CS_PIN 44 #endif #endif ``` I've already tried",
"#ifndef E0_CS_PIN #define E0_CS_PIN 42 #endif #endif #if DISABLED(X_AXIS_USE_E1) && DISABLED(Y_AXIS_USE_E1) && DISABLED(Z_AXIS_USE_E1)",
"of code and it will work, but it's not working. Any ideas ?",
"[pins\\_RAMPS.h](https://github.com/JimBrown/MarlinTarantula/blob/2ce73937f3c57aac28a8d5f11a6ed9135a27cdca/Marlin/pins_RAMPS.h) [![Screenshot of code snippet](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\")](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\")",
"#endif #endif ``` I've already tried everything that the online community tells me",
"from [Line 139](https://github.com/JimBrown/MarlinTarantula/blob/2ce73937f3c57aac28a8d5f11a6ed9135a27cdca/Marlin/pins_RAMPS.h#L139), [pins\\_RAMPS.h](https://github.com/JimBrown/MarlinTarantula/blob/2ce73937f3c57aac28a8d5f11a6ed9135a27cdca/Marlin/pins_RAMPS.h) [![Screenshot of code snippet](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\")](https://i.stack.imgur.com/ufVqI.png \"Screenshot",
"will work, but it's not working. Any ideas ? By the way E0",
"Any ideas ? By the way E0 is not working because I've burnt",
"#define E1_DIR_PIN 34 #define E1_ENABLE_PIN 30 #ifndef E1_CS_PIN #define E1_CS_PIN 44 #endif #endif",
"#define E0_DIR_PIN 34 #define E0_ENABLE_PIN 30 #ifndef E0_CS_PIN #define E0_CS_PIN 44 #endif #else",
"that all doesn't help me. Almost everyone is saying that I just have",
"E1_DIR_PIN 34 #define E1_ENABLE_PIN 30 #ifndef E1_CS_PIN #define E1_CS_PIN 44 #endif #endif ```",
"is the actual code: ``` #if ENABLED(EXTRUDER_USE_E1) #define E0_STEP_PIN 36 #define E0_DIR_PIN 34",
"E1_CS_PIN #define E1_CS_PIN 44 #endif #endif ``` I've already tried everything that the",
"to do to solve this problem, but that all doesn't help me. Almost",
"community tells me to do to solve this problem, but that all doesn't",
"#define E0_ENABLE_PIN 30 #ifndef E0_CS_PIN #define E0_CS_PIN 44 #endif #else #define E0_STEP_PIN 26",
"code snippet](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\")](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\") Here is the",
"the actual code: ``` #if ENABLED(EXTRUDER_USE_E1) #define E0_STEP_PIN 36 #define E0_DIR_PIN 34 #define",
"#if DISABLED(X_AXIS_USE_E1) && DISABLED(Y_AXIS_USE_E1) && DISABLED(Z_AXIS_USE_E1) && DISABLED(EXTRUDER_USE_E1) #define E1_STEP_PIN 36 #define E1_DIR_PIN",
"ENABLED(EXTRUDER_USE_E1) #define E0_STEP_PIN 36 #define E0_DIR_PIN 34 #define E0_ENABLE_PIN 30 #ifndef E0_CS_PIN #define",
"&& DISABLED(Y_AXIS_USE_E1) && DISABLED(Z_AXIS_USE_E1) && DISABLED(EXTRUDER_USE_E1) #define E1_STEP_PIN 36 #define E1_DIR_PIN 34 #define",
"#define E0_STEP_PIN 26 #define E0_DIR_PIN 28 #define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN #define E0_CS_PIN",
"34 #define E1_ENABLE_PIN 30 #ifndef E1_CS_PIN #define E1_CS_PIN 44 #endif #endif ``` I've",
"``` I've already tried everything that the online community tells me to do",
"is saying that I just have to swap these lines of code and",
"have to swap these lines of code and it will work, but it's",
"? By the way E0 is not working because I've burnt a pot",
"#define E0_CS_PIN 42 #endif #endif #if DISABLED(X_AXIS_USE_E1) && DISABLED(Y_AXIS_USE_E1) && DISABLED(Z_AXIS_USE_E1) && DISABLED(EXTRUDER_USE_E1)",
"Looking at the following code, from [Line 139](https://github.com/JimBrown/MarlinTarantula/blob/2ce73937f3c57aac28a8d5f11a6ed9135a27cdca/Marlin/pins_RAMPS.h#L139), [pins\\_RAMPS.h](https://github.com/JimBrown/MarlinTarantula/blob/2ce73937f3c57aac28a8d5f11a6ed9135a27cdca/Marlin/pins_RAMPS.h) [![Screenshot of code snippet](https://i.stack.imgur.com/ufVqI.png",
"#if ENABLED(EXTRUDER_USE_E1) #define E0_STEP_PIN 36 #define E0_DIR_PIN 34 #define E0_ENABLE_PIN 30 #ifndef E0_CS_PIN",
"saying that I just have to swap these lines of code and it",
"it's not working. Any ideas ? By the way E0 is not working",
"lines of code and it will work, but it's not working. Any ideas",
"not working. Any ideas ? By the way E0 is not working because",
"snippet](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\")](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\") Here is the actual",
"of code snippet](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\")](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\") Here is",
"code snippet\") Here is the actual code: ``` #if ENABLED(EXTRUDER_USE_E1) #define E0_STEP_PIN 36",
"E0_CS_PIN 42 #endif #endif #if DISABLED(X_AXIS_USE_E1) && DISABLED(Y_AXIS_USE_E1) && DISABLED(Z_AXIS_USE_E1) && DISABLED(EXTRUDER_USE_E1) #define",
"36 #define E1_DIR_PIN 34 #define E1_ENABLE_PIN 30 #ifndef E1_CS_PIN #define E1_CS_PIN 44 #endif",
"to solve this problem, but that all doesn't help me. Almost everyone is",
"E0_STEP_PIN 26 #define E0_DIR_PIN 28 #define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN #define E0_CS_PIN 42",
"E0_CS_PIN #define E0_CS_PIN 42 #endif #endif #if DISABLED(X_AXIS_USE_E1) && DISABLED(Y_AXIS_USE_E1) && DISABLED(Z_AXIS_USE_E1) &&",
"#define E0_STEP_PIN 36 #define E0_DIR_PIN 34 #define E0_ENABLE_PIN 30 #ifndef E0_CS_PIN #define E0_CS_PIN",
"[Line 139](https://github.com/JimBrown/MarlinTarantula/blob/2ce73937f3c57aac28a8d5f11a6ed9135a27cdca/Marlin/pins_RAMPS.h#L139), [pins\\_RAMPS.h](https://github.com/JimBrown/MarlinTarantula/blob/2ce73937f3c57aac28a8d5f11a6ed9135a27cdca/Marlin/pins_RAMPS.h) [![Screenshot of code snippet](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\")](https://i.stack.imgur.com/ufVqI.png \"Screenshot of",
"I just have to swap these lines of code and it will work,",
"help me. Almost everyone is saying that I just have to swap these",
"#define E1_ENABLE_PIN 30 #ifndef E1_CS_PIN #define E1_CS_PIN 44 #endif #endif ``` I've already",
"44 #endif #endif ``` I've already tried everything that the online community tells",
"and it will work, but it's not working. Any ideas ? By the",
"30 #ifndef E1_CS_PIN #define E1_CS_PIN 44 #endif #endif ``` I've already tried everything",
"By the way E0 is not working because I've burnt a pot on",
"30 #ifndef E0_CS_PIN #define E0_CS_PIN 44 #endif #else #define E0_STEP_PIN 26 #define E0_DIR_PIN",
"#ifndef E0_CS_PIN #define E0_CS_PIN 44 #endif #else #define E0_STEP_PIN 26 #define E0_DIR_PIN 28",
"28 #define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN #define E0_CS_PIN 42 #endif #endif #if DISABLED(X_AXIS_USE_E1)",
"42 #endif #endif #if DISABLED(X_AXIS_USE_E1) && DISABLED(Y_AXIS_USE_E1) && DISABLED(Z_AXIS_USE_E1) && DISABLED(EXTRUDER_USE_E1) #define E1_STEP_PIN",
"E0_CS_PIN 44 #endif #else #define E0_STEP_PIN 26 #define E0_DIR_PIN 28 #define E0_ENABLE_PIN 24",
"#define E1_STEP_PIN 36 #define E1_DIR_PIN 34 #define E1_ENABLE_PIN 30 #ifndef E1_CS_PIN #define E1_CS_PIN",
"E0_CS_PIN #define E0_CS_PIN 44 #endif #else #define E0_STEP_PIN 26 #define E0_DIR_PIN 28 #define",
"snippet\")](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\") Here is the actual code: ``` #if ENABLED(EXTRUDER_USE_E1)",
"#define E0_DIR_PIN 28 #define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN #define E0_CS_PIN 42 #endif #endif",
"code: ``` #if ENABLED(EXTRUDER_USE_E1) #define E0_STEP_PIN 36 #define E0_DIR_PIN 34 #define E0_ENABLE_PIN 30",
"everything that the online community tells me to do to solve this problem,",
"DISABLED(Z_AXIS_USE_E1) && DISABLED(EXTRUDER_USE_E1) #define E1_STEP_PIN 36 #define E1_DIR_PIN 34 #define E1_ENABLE_PIN 30 #ifndef",
"DISABLED(Y_AXIS_USE_E1) && DISABLED(Z_AXIS_USE_E1) && DISABLED(EXTRUDER_USE_E1) #define E1_STEP_PIN 36 #define E1_DIR_PIN 34 #define E1_ENABLE_PIN",
"that I just have to swap these lines of code and it will",
"ideas ? By the way E0 is not working because I've burnt a",
"#define E1_CS_PIN 44 #endif #endif ``` I've already tried everything that the online",
"E0_STEP_PIN 36 #define E0_DIR_PIN 34 #define E0_ENABLE_PIN 30 #ifndef E0_CS_PIN #define E0_CS_PIN 44",
"#else #define E0_STEP_PIN 26 #define E0_DIR_PIN 28 #define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN #define",
"#define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN #define E0_CS_PIN 42 #endif #endif #if DISABLED(X_AXIS_USE_E1) &&",
"the following code, from [Line 139](https://github.com/JimBrown/MarlinTarantula/blob/2ce73937f3c57aac28a8d5f11a6ed9135a27cdca/Marlin/pins_RAMPS.h#L139), [pins\\_RAMPS.h](https://github.com/JimBrown/MarlinTarantula/blob/2ce73937f3c57aac28a8d5f11a6ed9135a27cdca/Marlin/pins_RAMPS.h) [![Screenshot of code snippet](https://i.stack.imgur.com/ufVqI.png \"Screenshot of",
"E0_ENABLE_PIN 24 #ifndef E0_CS_PIN #define E0_CS_PIN 42 #endif #endif #if DISABLED(X_AXIS_USE_E1) && DISABLED(Y_AXIS_USE_E1)",
"tried everything that the online community tells me to do to solve this",
"that the online community tells me to do to solve this problem, but",
"way E0 is not working because I've burnt a pot on it :)"
] |
[
"but this one I have never seen or had before. Do you guys",
"one I have never seen or had before. Do you guys have any",
"last one is a hard one for me. It prints super fine up",
"the print quality problems. But the last one is a hard one for",
"it seems to happen roughly at the same spot. I tried PID tuning",
"(Anet a8 with upgraded frame). I have already been able to fix most",
"my own printer and troubleshooting the problems but this one I have never",
"tightened everything on the extruder, making sure everything was nice and snug. I",
"AM8 (Anet a8 with upgraded frame). I have already been able to fix",
"to point me in the right direction? Running Marlin 1.1.8. I have a",
"I recently installed a genuine E3D V6 (direct) on my AM8 (Anet a8",
"E3D V6 (direct) on my AM8 (Anet a8 with upgraded frame). I have",
"of filament and it seems to happen roughly at the same spot. I",
"sure everything was nice and snug. I am not exactly a newbie when",
"direction? Running Marlin 1.1.8. I have a BLTouch on it and an AnyCubic",
"filament properly after cancelling the print. I thought it was heat creep but",
"can comfortably put my finger on it and keep it there. I also",
"finger on it and keep it there. I also tried two different brands",
"PID tuning (the temps are literally perfect and super straight with no fluctuations),",
"height. Then the extruder starts slipping and starts making weird noises like its",
"upgraded frame). I have already been able to fix most of the print",
"before. Do you guys have any tips for me to point me in",
"when it comes to fixing my own printer and troubleshooting the problems but",
"But the last one is a hard one for me. It prints super",
"have any tips for me to point me in the right direction? Running",
"starts making weird noises like its clogged but I will be able to",
"genuine E3D V6 (direct) on my AM8 (Anet a8 with upgraded frame). I",
"one is a hard one for me. It prints super fine up until",
"extruder gear and checked if it was worn or anything. Then I tightened",
"a tad warm. I can comfortably put my finger on it and keep",
"extruder starts slipping and starts making weird noises like its clogged but I",
"hard one for me. It prints super fine up until a certain height.",
"and starts making weird noises like its clogged but I will be able",
"printer and troubleshooting the problems but this one I have never seen or",
"the right direction? Running Marlin 1.1.8. I have a BLTouch on it and",
"spiral heat break it is just a tad warm. I can comfortably put",
"guys have any tips for me to point me in the right direction?",
"most of the print quality problems. But the last one is a hard",
"roughly at the same spot. I tried PID tuning (the temps are literally",
"to happen roughly at the same spot. I tried PID tuning (the temps",
"me. It prints super fine up until a certain height. Then the extruder",
"the same spot. I tried PID tuning (the temps are literally perfect and",
"super straight with no fluctuations), I tried cleaning the extruder gear and checked",
"or had before. Do you guys have any tips for me to point",
"is a hard one for me. It prints super fine up until a",
"this one I have never seen or had before. Do you guys have",
"no fluctuations), I tried cleaning the extruder gear and checked if it was",
"fix most of the print quality problems. But the last one is a",
"perfect and super straight with no fluctuations), I tried cleaning the extruder gear",
"recently installed a genuine E3D V6 (direct) on my AM8 (Anet a8 with",
"worn or anything. Then I tightened everything on the extruder, making sure everything",
"be able to push through filament properly after cancelling the print. I thought",
"tad warm. I can comfortably put my finger on it and keep it",
"it was worn or anything. Then I tightened everything on the extruder, making",
"the spiral heat break it is just a tad warm. I can comfortably",
"comes to fixing my own printer and troubleshooting the problems but this one",
"everything was nice and snug. I am not exactly a newbie when it",
"right direction? Running Marlin 1.1.8. I have a BLTouch on it and an",
"exactly a newbie when it comes to fixing my own printer and troubleshooting",
"on it and keep it there. I also tried two different brands of",
"own printer and troubleshooting the problems but this one I have never seen",
"comfortably put my finger on it and keep it there. I also tried",
"it was heat creep but when touching the spiral heat break it is",
"Running Marlin 1.1.8. I have a BLTouch on it and an AnyCubic UltraBase.",
"there. I also tried two different brands of filament and it seems to",
"problems. But the last one is a hard one for me. It prints",
"filament and it seems to happen roughly at the same spot. I tried",
"was worn or anything. Then I tightened everything on the extruder, making sure",
"the print. I thought it was heat creep but when touching the spiral",
"already been able to fix most of the print quality problems. But the",
"checked if it was worn or anything. Then I tightened everything on the",
"V6 (direct) on my AM8 (Anet a8 with upgraded frame). I have already",
"any tips for me to point me in the right direction? Running Marlin",
"after cancelling the print. I thought it was heat creep but when touching",
"it there. I also tried two different brands of filament and it seems",
"tuning (the temps are literally perfect and super straight with no fluctuations), I",
"problems but this one I have never seen or had before. Do you",
"just a tad warm. I can comfortably put my finger on it and",
"with upgraded frame). I have already been able to fix most of the",
"me to point me in the right direction? Running Marlin 1.1.8. I have",
"a certain height. Then the extruder starts slipping and starts making weird noises",
"super fine up until a certain height. Then the extruder starts slipping and",
"are literally perfect and super straight with no fluctuations), I tried cleaning the",
"making weird noises like its clogged but I will be able to push",
"starts slipping and starts making weird noises like its clogged but I will",
"Do you guys have any tips for me to point me in the",
"at the same spot. I tried PID tuning (the temps are literally perfect",
"extruder, making sure everything was nice and snug. I am not exactly a",
"but when touching the spiral heat break it is just a tad warm.",
"thought it was heat creep but when touching the spiral heat break it",
"up until a certain height. Then the extruder starts slipping and starts making",
"print. I thought it was heat creep but when touching the spiral heat",
"to fixing my own printer and troubleshooting the problems but this one I",
"one for me. It prints super fine up until a certain height. Then",
"everything on the extruder, making sure everything was nice and snug. I am",
"am not exactly a newbie when it comes to fixing my own printer",
"the extruder, making sure everything was nice and snug. I am not exactly",
"fixing my own printer and troubleshooting the problems but this one I have",
"if it was worn or anything. Then I tightened everything on the extruder,",
"nice and snug. I am not exactly a newbie when it comes to",
"straight with no fluctuations), I tried cleaning the extruder gear and checked if",
"certain height. Then the extruder starts slipping and starts making weird noises like",
"fluctuations), I tried cleaning the extruder gear and checked if it was worn",
"seems to happen roughly at the same spot. I tried PID tuning (the",
"tried PID tuning (the temps are literally perfect and super straight with no",
"to fix most of the print quality problems. But the last one is",
"clogged but I will be able to push through filament properly after cancelling",
"weird noises like its clogged but I will be able to push through",
"happen roughly at the same spot. I tried PID tuning (the temps are",
"keep it there. I also tried two different brands of filament and it",
"(the temps are literally perfect and super straight with no fluctuations), I tried",
"I also tried two different brands of filament and it seems to happen",
"spot. I tried PID tuning (the temps are literally perfect and super straight",
"and troubleshooting the problems but this one I have never seen or had",
"it is just a tad warm. I can comfortably put my finger on",
"literally perfect and super straight with no fluctuations), I tried cleaning the extruder",
"I thought it was heat creep but when touching the spiral heat break",
"was heat creep but when touching the spiral heat break it is just",
"I tightened everything on the extruder, making sure everything was nice and snug.",
"is just a tad warm. I can comfortably put my finger on it",
"I tried PID tuning (the temps are literally perfect and super straight with",
"and snug. I am not exactly a newbie when it comes to fixing",
"put my finger on it and keep it there. I also tried two",
"two different brands of filament and it seems to happen roughly at the",
"I am not exactly a newbie when it comes to fixing my own",
"my AM8 (Anet a8 with upgraded frame). I have already been able to",
"frame). I have already been able to fix most of the print quality",
"and keep it there. I also tried two different brands of filament and",
"temps are literally perfect and super straight with no fluctuations), I tried cleaning",
"and checked if it was worn or anything. Then I tightened everything on",
"when touching the spiral heat break it is just a tad warm. I",
"my finger on it and keep it there. I also tried two different",
"was nice and snug. I am not exactly a newbie when it comes",
"gear and checked if it was worn or anything. Then I tightened everything",
"quality problems. But the last one is a hard one for me. It",
"also tried two different brands of filament and it seems to happen roughly",
"a newbie when it comes to fixing my own printer and troubleshooting the",
"it comes to fixing my own printer and troubleshooting the problems but this",
"like its clogged but I will be able to push through filament properly",
"able to fix most of the print quality problems. But the last one",
"been able to fix most of the print quality problems. But the last",
"So I recently installed a genuine E3D V6 (direct) on my AM8 (Anet",
"cleaning the extruder gear and checked if it was worn or anything. Then",
"It prints super fine up until a certain height. Then the extruder starts",
"will be able to push through filament properly after cancelling the print. I",
"the extruder starts slipping and starts making weird noises like its clogged but",
"the extruder gear and checked if it was worn or anything. Then I",
"push through filament properly after cancelling the print. I thought it was heat",
"anything. Then I tightened everything on the extruder, making sure everything was nice",
"have already been able to fix most of the print quality problems. But",
"not exactly a newbie when it comes to fixing my own printer and",
"its clogged but I will be able to push through filament properly after",
"have never seen or had before. Do you guys have any tips for",
"Then the extruder starts slipping and starts making weird noises like its clogged",
"different brands of filament and it seems to happen roughly at the same",
"never seen or had before. Do you guys have any tips for me",
"but I will be able to push through filament properly after cancelling the",
"on my AM8 (Anet a8 with upgraded frame). I have already been able",
"with no fluctuations), I tried cleaning the extruder gear and checked if it",
"newbie when it comes to fixing my own printer and troubleshooting the problems",
"for me to point me in the right direction? Running Marlin 1.1.8. I",
"or anything. Then I tightened everything on the extruder, making sure everything was",
"the last one is a hard one for me. It prints super fine",
"same spot. I tried PID tuning (the temps are literally perfect and super",
"a genuine E3D V6 (direct) on my AM8 (Anet a8 with upgraded frame).",
"in the right direction? Running Marlin 1.1.8. I have a BLTouch on it",
"for me. It prints super fine up until a certain height. Then the",
"break it is just a tad warm. I can comfortably put my finger",
"installed a genuine E3D V6 (direct) on my AM8 (Anet a8 with upgraded",
"it and keep it there. I also tried two different brands of filament",
"troubleshooting the problems but this one I have never seen or had before.",
"to push through filament properly after cancelling the print. I thought it was",
"brands of filament and it seems to happen roughly at the same spot.",
"seen or had before. Do you guys have any tips for me to",
"point me in the right direction? Running Marlin 1.1.8. I have a BLTouch",
"properly after cancelling the print. I thought it was heat creep but when",
"me in the right direction? Running Marlin 1.1.8. I have a BLTouch on",
"(direct) on my AM8 (Anet a8 with upgraded frame). I have already been",
"fine up until a certain height. Then the extruder starts slipping and starts",
"tried two different brands of filament and it seems to happen roughly at",
"the problems but this one I have never seen or had before. Do",
"on the extruder, making sure everything was nice and snug. I am not",
"slipping and starts making weird noises like its clogged but I will be",
"I can comfortably put my finger on it and keep it there. I",
"of the print quality problems. But the last one is a hard one",
"tried cleaning the extruder gear and checked if it was worn or anything.",
"I have never seen or had before. Do you guys have any tips",
"until a certain height. Then the extruder starts slipping and starts making weird",
"print quality problems. But the last one is a hard one for me.",
"Then I tightened everything on the extruder, making sure everything was nice and",
"cancelling the print. I thought it was heat creep but when touching the",
"snug. I am not exactly a newbie when it comes to fixing my",
"heat break it is just a tad warm. I can comfortably put my",
"tips for me to point me in the right direction? Running Marlin 1.1.8.",
"and it seems to happen roughly at the same spot. I tried PID",
"prints super fine up until a certain height. Then the extruder starts slipping",
"noises like its clogged but I will be able to push through filament",
"making sure everything was nice and snug. I am not exactly a newbie",
"a8 with upgraded frame). I have already been able to fix most of",
"touching the spiral heat break it is just a tad warm. I can",
"a hard one for me. It prints super fine up until a certain",
"and super straight with no fluctuations), I tried cleaning the extruder gear and",
"you guys have any tips for me to point me in the right",
"able to push through filament properly after cancelling the print. I thought it",
"had before. Do you guys have any tips for me to point me",
"through filament properly after cancelling the print. I thought it was heat creep",
"I have already been able to fix most of the print quality problems.",
"heat creep but when touching the spiral heat break it is just a",
"I tried cleaning the extruder gear and checked if it was worn or",
"I will be able to push through filament properly after cancelling the print.",
"creep but when touching the spiral heat break it is just a tad",
"warm. I can comfortably put my finger on it and keep it there."
] |
[
"the travel lines below! Why is it jumping all over the place? [](https://i.stack.imgur.com/NuTiI.png) [](https://i.stack.imgur.com/JPmd3.png)",
"using \"random\" seam corner preference. If I had chosen \"sharpest corner\", the bumps",
"of flying over the air...*right*? I have been able to keep the seems",
"earlier) without bumps. I think they are seams? The filament is PLA. Combing",
"which I thought makes it so that the nozzle travels over already printed",
"stack up in one place, but still stick out. [](https://i.stack.imgur.com/NuTiI.png) [](https://i.stack.imgur.com/NrinP.png) The object above was printed using \"random\" seam corner preference. If I",
"instead of flying over the air...*right*? I have been able to keep the",
"are sharp corners. *Sometimes* cura hides the seems properly...sometimes it doesn't. Here is",
"traveling\" enabled and disabled, doesn't seem to make much difference. I feel that",
"chosen \"sharpest corner\", the bumps would all just stack up in one place,",
"through the air like that, but I can't find it. Perhaps that's not",
"The filament is PLA. Combing is enabled, which I thought makes it so",
"it. Perhaps that's not related to the bumps? The printer is a MonoPrice",
"most part when there are sharp corners. *Sometimes* cura hides the seems properly...sometimes",
"Combing is enabled, which I thought makes it so that the nozzle travels",
"jumping all over the place? [](https://i.stack.imgur.com/73rsT.png) [](https://i.stack.imgur.com/gu0TJ.png)",
"not jumping through the air like that, but I can't find it. Perhaps",
"jumping through the air like that, but I can't find it. Perhaps that's",
"have been able to keep the seems hidden for the most part when",
"at the travel lines below! Why is it jumping all over the place?",
"I have not been able to print smooth and round shapes using Cura",
"part when there are sharp corners. *Sometimes* cura hides the seems properly...sometimes it",
"print smooth and round shapes using Cura 3.3.1 (or earlier) without bumps. I",
"example shape I have tried printing with several different settings: [](https://i.stack.imgur.com/NrinP.png)",
"different settings: [](https://i.stack.imgur.com/NrinP.png) The object above was printed using \"random\" seam",
"below! Why is it jumping all over the place? [](https://i.stack.imgur.com/73rsT.png) [](https://i.stack.imgur.com/ygxYP.png) [](https://i.stack.imgur.com/Jvuy1.png) Just look at the travel lines below! Why is",
"Just look at the travel lines below! Why is it jumping all over",
"so that the nozzle travels over already printed areas, instead of flying over",
"layer](https://i.stack.imgur.com/gu0TJ.png)](https://i.stack.imgur.com/gu0TJ.png) I have tried \"Avoid printed parts when traveling\" enabled and disabled, doesn't",
"much difference. I feel that there should be a configuration that results in",
"1](https://i.stack.imgur.com/JPmd3.png)](https://i.stack.imgur.com/JPmd3.png) [](https://i.stack.imgur.com/a5T3w.png) [](https://i.stack.imgur.com/ygxYP.png) [](https://i.stack.imgur.com/Jvuy1.png) Just look at",
"seems hidden for the most part when there are sharp corners. *Sometimes* cura",
"smooth and round shapes using Cura 3.3.1 (or earlier) without bumps. I think",
"settings 4](https://i.stack.imgur.com/Jvuy1.png)](https://i.stack.imgur.com/Jvuy1.png) Just look at the travel lines below! Why is it jumping",
"that's not related to the bumps? The printer is a MonoPrice Mini Delta.",
"there are sharp corners. *Sometimes* cura hides the seems properly...sometimes it doesn't. Here",
"the place? [](https://i.stack.imgur.com/73rsT.png) [](https://i.stack.imgur.com/gu0TJ.png) I have tried",
"above was printed using \"random\" seam corner preference. If I had chosen \"sharpest",
"when there are sharp corners. *Sometimes* cura hides the seems properly...sometimes it doesn't.",
"sharp corners. *Sometimes* cura hides the seems properly...sometimes it doesn't. Here is an",
"settings 1](https://i.stack.imgur.com/JPmd3.png)](https://i.stack.imgur.com/JPmd3.png) [](https://i.stack.imgur.com/a5T3w.png) [](https://i.stack.imgur.com/ygxYP.png) [](https://i.stack.imgur.com/Jvuy1.png) Just look",
"all over the place? [](https://i.stack.imgur.com/73rsT.png) [](https://i.stack.imgur.com/gu0TJ.png) I",
"that the nozzle travels over already printed areas, instead of flying over the",
"seam corner preference. If I had chosen \"sharpest corner\", the bumps would all",
"was printed using \"random\" seam corner preference. If I had chosen \"sharpest corner\",",
"a configuration that results in the nozzle not jumping through the air like",
"I can't find it. Perhaps that's not related to the bumps? The printer",
"Cura 3.3.1 (or earlier) without bumps. I think they are seams? The filament",
"lines below! Why is it jumping all over the place? [](https://i.stack.imgur.com/73rsT.png)",
"I have tried printing with several different settings: [](https://i.stack.imgur.com/NrinP.png) The object",
"Perhaps that's not related to the bumps? The printer is a MonoPrice Mini",
"to print smooth and round shapes using Cura 3.3.1 (or earlier) without bumps.",
"filament is PLA. Combing is enabled, which I thought makes it so that",
"it doesn't. Here is an example shape I have tried printing with several",
"be a configuration that results in the nozzle not jumping through the air",
"preference. If I had chosen \"sharpest corner\", the bumps would all just stack",
"been able to print smooth and round shapes using Cura 3.3.1 (or earlier)",
"in the nozzle not jumping through the air like that, but I can't",
"bumps. I think they are seams? The filament is PLA. Combing is enabled,",
"properly...sometimes it doesn't. Here is an example shape I have tried printing with",
"printed using \"random\" seam corner preference. If I had chosen \"sharpest corner\", the",
"printed parts when traveling\" enabled and disabled, doesn't seem to make much difference.",
"[](https://i.stack.imgur.com/73rsT.png) [](https://i.stack.imgur.com/gu0TJ.png) I have tried \"Avoid printed",
"have not been able to print smooth and round shapes using Cura 3.3.1",
"feel that there should be a configuration that results in the nozzle not",
"over the air...*right*? I have been able to keep the seems hidden for",
"shape](https://i.stack.imgur.com/NuTiI.png)](https://i.stack.imgur.com/NuTiI.png) [](https://i.stack.imgur.com/JPmd3.png) [](https://i.stack.imgur.com/a5T3w.png) [](https://i.stack.imgur.com/ygxYP.png) [](https://i.stack.imgur.com/Jvuy1.png)",
"[](https://i.stack.imgur.com/a5T3w.png) [](https://i.stack.imgur.com/ygxYP.png) [](https://i.stack.imgur.com/Jvuy1.png) Just look at the",
"would all just stack up in one place, but still stick out. [](https://i.stack.imgur.com/NrinP.png) The object above was printed using \"random\" seam corner",
"still stick out. [](https://i.stack.imgur.com/NuTiI.png) [](https://i.stack.imgur.com/JPmd3.png) [](https://i.stack.imgur.com/a5T3w.png) [](https://i.stack.imgur.com/NrinP.png) The object above was printed using \"random\" seam corner preference.",
"seem to make much difference. I feel that there should be a configuration",
"that, but I can't find it. Perhaps that's not related to the bumps?",
"able to print smooth and round shapes using Cura 3.3.1 (or earlier) without",
"an example shape I have tried printing with several different settings: [](https://i.stack.imgur.com/gu0TJ.png) I have tried \"Avoid printed parts when traveling\" enabled and disabled,",
"seems properly...sometimes it doesn't. Here is an example shape I have tried printing",
"areas, instead of flying over the air...*right*? I have been able to keep",
"travel lines](https://i.stack.imgur.com/73rsT.png)](https://i.stack.imgur.com/73rsT.png) [](https://i.stack.imgur.com/gu0TJ.png) I have tried \"Avoid printed parts",
"nozzle travels over already printed areas, instead of flying over the air...*right*? I",
"[](https://i.stack.imgur.com/JPmd3.png) [](https://i.stack.imgur.com/a5T3w.png) [](https://i.stack.imgur.com/ygxYP.png) [](https://i.stack.imgur.com/Jvuy1.png) Just",
"when traveling\" enabled and disabled, doesn't seem to make much difference. I feel",
"over the place? [](https://i.stack.imgur.com/73rsT.png) [](https://i.stack.imgur.com/gu0TJ.png) I have",
"and round shapes using Cura 3.3.1 (or earlier) without bumps. I think they",
"the nozzle not jumping through the air like that, but I can't find",
"*Sometimes* cura hides the seems properly...sometimes it doesn't. Here is an example shape",
"enabled, which I thought makes it so that the nozzle travels over already",
"makes it so that the nozzle travels over already printed areas, instead of",
"should be a configuration that results in the nozzle not jumping through the",
"lines](https://i.stack.imgur.com/73rsT.png)](https://i.stack.imgur.com/73rsT.png) [](https://i.stack.imgur.com/gu0TJ.png) I have tried \"Avoid printed parts when",
"is PLA. Combing is enabled, which I thought makes it so that the",
"the air...*right*? I have been able to keep the seems hidden for the",
"I had chosen \"sharpest corner\", the bumps would all just stack up in",
"have tried printing with several different settings: [](https://i.stack.imgur.com/NrinP.png) The object above",
"printing with several different settings: [](https://i.stack.imgur.com/NrinP.png) The object above was printed",
"already printed areas, instead of flying over the air...*right*? I have been able",
"tried \"Avoid printed parts when traveling\" enabled and disabled, doesn't seem to make",
"[](https://i.stack.imgur.com/gu0TJ.png) I have tried \"Avoid printed parts when traveling\"",
"corners. *Sometimes* cura hides the seems properly...sometimes it doesn't. Here is an example",
"Why is it jumping all over the place? [](https://i.stack.imgur.com/73rsT.png) [](https://i.stack.imgur.com/NrinP.png) The object above was printed using \"random\"",
"that results in the nozzle not jumping through the air like that, but",
"the most part when there are sharp corners. *Sometimes* cura hides the seems",
"can't find it. Perhaps that's not related to the bumps? The printer is",
"been able to keep the seems hidden for the most part when there",
"parts when traveling\" enabled and disabled, doesn't seem to make much difference. I",
"find it. Perhaps that's not related to the bumps? The printer is a",
"corner preference. If I had chosen \"sharpest corner\", the bumps would all just",
"2](https://i.stack.imgur.com/a5T3w.png)](https://i.stack.imgur.com/a5T3w.png) [](https://i.stack.imgur.com/ygxYP.png) [](https://i.stack.imgur.com/Jvuy1.png) Just look at the travel lines",
"air...*right*? I have been able to keep the seems hidden for the most",
"corner\", the bumps would all just stack up in one place, but still",
"I have tried \"Avoid printed parts when traveling\" enabled and disabled, doesn't seem",
"and disabled, doesn't seem to make much difference. I feel that there should",
"using Cura 3.3.1 (or earlier) without bumps. I think they are seams? The",
"object above was printed using \"random\" seam corner preference. If I had chosen",
"are seams? The filament is PLA. Combing is enabled, which I thought makes",
"the seems properly...sometimes it doesn't. Here is an example shape I have tried",
"think they are seams? The filament is PLA. Combing is enabled, which I",
"I thought makes it so that the nozzle travels over already printed areas,",
"have tried \"Avoid printed parts when traveling\" enabled and disabled, doesn't seem to",
"If I had chosen \"sharpest corner\", the bumps would all just stack up",
"settings 2](https://i.stack.imgur.com/a5T3w.png)](https://i.stack.imgur.com/a5T3w.png) [](https://i.stack.imgur.com/ygxYP.png) [](https://i.stack.imgur.com/Jvuy1.png) Just look at the travel",
"place? [](https://i.stack.imgur.com/73rsT.png) [](https://i.stack.imgur.com/gu0TJ.png) I have tried \"Avoid",
"in one place, but still stick out. [](https://i.stack.imgur.com/NuTiI.png) [](https://i.stack.imgur.com/JPmd3.png) [](https://i.stack.imgur.com/Jvuy1.png) Just look at the travel lines below! Why is it jumping all",
"Here is an example shape I have tried printing with several different settings:",
"stick out. [](https://i.stack.imgur.com/NuTiI.png) [](https://i.stack.imgur.com/JPmd3.png) [](https://i.stack.imgur.com/a5T3w.png) [](https://i.stack.imgur.com/ygxYP.png)",
"[](https://i.stack.imgur.com/Jvuy1.png) Just look at the travel lines below! Why is it",
"not been able to print smooth and round shapes using Cura 3.3.1 (or",
"enabled and disabled, doesn't seem to make much difference. I feel that there",
"configuration that results in the nozzle not jumping through the air like that,",
"I feel that there should be a configuration that results in the nozzle",
"(or earlier) without bumps. I think they are seams? The filament is PLA.",
"travel lines below! Why is it jumping all over the place? [](https://i.stack.imgur.com/gu0TJ.png) I have tried \"Avoid printed parts when traveling\" enabled",
"[](https://i.stack.imgur.com/ygxYP.png) [](https://i.stack.imgur.com/Jvuy1.png) Just look at the travel lines below!",
"is enabled, which I thought makes it so that the nozzle travels over",
"over already printed areas, instead of flying over the air...*right*? I have been",
"the seems hidden for the most part when there are sharp corners. *Sometimes*",
"lines single layer](https://i.stack.imgur.com/gu0TJ.png)](https://i.stack.imgur.com/gu0TJ.png) I have tried \"Avoid printed parts when traveling\" enabled and",
"is an example shape I have tried printing with several different settings: [](https://i.stack.imgur.com/NuTiI.png) [](https://i.stack.imgur.com/JPmd3.png) [](https://i.stack.imgur.com/a5T3w.png)",
"Settings 3](https://i.stack.imgur.com/ygxYP.png)](https://i.stack.imgur.com/ygxYP.png) [](https://i.stack.imgur.com/Jvuy1.png) Just look at the travel lines below! Why",
"to make much difference. I feel that there should be a configuration that",
"without bumps. I think they are seams? The filament is PLA. Combing is",
"hidden for the most part when there are sharp corners. *Sometimes* cura hides",
"disabled, doesn't seem to make much difference. I feel that there should be",
"there should be a configuration that results in the nozzle not jumping through",
"tried printing with several different settings: [](https://i.stack.imgur.com/NrinP.png) The object above was",
"but still stick out. [](https://i.stack.imgur.com/NuTiI.png) [](https://i.stack.imgur.com/JPmd3.png) [](https://i.stack.imgur.com/a5T3w.png) [](https://i.stack.imgur.com/NuTiI.png) [](https://i.stack.imgur.com/73rsT.png) [](https://i.stack.imgur.com/NrinP.png) The",
"flying over the air...*right*? I have been able to keep the seems hidden",
"cura hides the seems properly...sometimes it doesn't. Here is an example shape I",
"[](https://i.stack.imgur.com/NuTiI.png) [](https://i.stack.imgur.com/JPmd3.png) [](https://i.stack.imgur.com/a5T3w.png) [](https://i.stack.imgur.com/ygxYP.png) [](https://i.stack.imgur.com/NrinP.png) The object above was printed using \"random\" seam corner preference. If",
"hides the seems properly...sometimes it doesn't. Here is an example shape I have",
"had chosen \"sharpest corner\", the bumps would all just stack up in one",
"it so that the nozzle travels over already printed areas, instead of flying",
"results in the nozzle not jumping through the air like that, but I",
"the nozzle travels over already printed areas, instead of flying over the air...*right*?",
"able to keep the seems hidden for the most part when there are",
"with several different settings: [](https://i.stack.imgur.com/NrinP.png) The object above was printed using",
"doesn't seem to make much difference. I feel that there should be a",
"for the most part when there are sharp corners. *Sometimes* cura hides the",
"3.3.1 (or earlier) without bumps. I think they are seams? The filament is",
"doesn't. Here is an example shape I have tried printing with several different",
"I have been able to keep the seems hidden for the most part",
"one place, but still stick out. [](https://i.stack.imgur.com/NuTiI.png) [](https://i.stack.imgur.com/JPmd3.png) [](https://i.stack.imgur.com/NuTiI.png) [](https://i.stack.imgur.com/JPmd3.png) [](https://i.stack.imgur.com/a5T3w.png) [](https://i.stack.imgur.com/ygxYP.png) [](https://i.stack.imgur.com/73rsT.png) [](https://i.stack.imgur.com/NuTiI.png)",
"I think they are seams? The filament is PLA. Combing is enabled, which"
] |
[
"Why isn't my printer doing anything with the M406 and M117 messages? Full",
"line endings, but looking at the file in a hex editor, all the",
"M117 Filament sensor OFF ``` The first line is provided by Prosi's default",
"looking at the file in a hex editor, all the lines seem to",
"default PLA profile. The second line should disable the sensor, and the third",
"; set units to millimeters G90 ; use absolute coordinates M83 ; use",
"spool of translucent PLA filament that doesn't work well with the filament sensor",
"feed character, including mine. Why isn't my printer doing anything with the M406",
"sensor OFF\" message. If I look in the gcode, it's there: ``` G92",
"there: ``` G92 E0.0 M221 S95 M900 K30; Filament gcode M406 ; Disable",
"in the \"Start G-code\" block that gets inserted at the beginning of the",
"it's there: ``` G92 E0.0 M221 S95 M900 K30; Filament gcode M406 ;",
"to end with a `0A` line feed character, including mine. Why isn't my",
"the \"Tune\" menu while printing, the sensor is still on. I thought I",
"in the gcode, it's there: ``` G92 E0.0 M221 S95 M900 K30; Filament",
"the beginning of the exported gcode file. I've got the following code: ```",
"extrusion ;BEFORE_LAYER_CHANGE ``` But if I print this gcode file, I see no",
"I thought I'd create a filament profile in Slic3r and disable the sensor",
"filament sensor on my Prosi i3 MK3. The translucency trips up the sensor,",
"all the lines seem to end with a `0A` line feed character, including",
"G92 E0.0 M221 S95 M900 K30; Filament gcode M406 ; Disable filament sensor",
"I have a spool of translucent PLA filament that doesn't work well with",
"code: ``` M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode M406 ; Disable filament sensor M117",
"; Disable filament sensor M117 Filament sensor OFF G21 ; set units to",
"the gcode, it's there: ``` G92 E0.0 M221 S95 M900 K30; Filament gcode",
"to millimeters G90 ; use absolute coordinates M83 ; use relative distances for",
"a hex editor, all the lines seem to end with a `0A` line",
"with the filament sensor on my Prosi i3 MK3. The translucency trips up",
"profile. The second line should disable the sensor, and the third line should",
"in the \"Tune\" menu while printing, the sensor is still on. I thought",
"sensor M117 Filament sensor OFF G21 ; set units to millimeters G90 ;",
"at the beginning of the exported gcode file. I've got the following code:",
"printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode M406 ; Disable filament sensor M117 Filament sensor OFF ```",
"the sensor, making it think the filament ran out. I thought I'd create",
"ran out. I thought I'd create a filament profile in Slic3r and disable",
"still on. I thought I might have a problem with line endings, but",
"profile in Slic3r and disable the sensor in the \"Start G-code\" block that",
"gcode file, I see no message, and when checking the sensor in the",
"sensor OFF ``` The first line is provided by Prosi's default PLA profile.",
"the sensor is still on. I thought I might have a problem with",
"Prosi i3 MK3. The translucency trips up the sensor, making it think the",
"endings, but looking at the file in a hex editor, all the lines",
"distances for extrusion ;BEFORE_LAYER_CHANGE ``` But if I print this gcode file, I",
"I see no message, and when checking the sensor in the \"Tune\" menu",
"block that gets inserted at the beginning of the exported gcode file. I've",
"mine. Why isn't my printer doing anything with the M406 and M117 messages?",
"no message, and when checking the sensor in the \"Tune\" menu while printing,",
"G90 ; use absolute coordinates M83 ; use relative distances for extrusion ;BEFORE_LAYER_CHANGE",
"The second line should disable the sensor, and the third line should print",
"coordinates M83 ; use relative distances for extrusion ;BEFORE_LAYER_CHANGE ``` But if I",
"I look in the gcode, it's there: ``` G92 E0.0 M221 S95 M900",
"sensor, and the third line should print the \"Filament sensor OFF\" message. If",
"for extrusion ;BEFORE_LAYER_CHANGE ``` But if I print this gcode file, I see",
"following code: ``` M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode M406 ; Disable filament sensor",
"printing, the sensor is still on. I thought I might have a problem",
"line should print the \"Filament sensor OFF\" message. If I look in the",
"line is provided by Prosi's default PLA profile. The second line should disable",
"``` But if I print this gcode file, I see no message, and",
"Disable filament sensor M117 Filament sensor OFF ``` The first line is provided",
"disable the sensor in the \"Start G-code\" block that gets inserted at the",
"checking the sensor in the \"Tune\" menu while printing, the sensor is still",
"; use relative distances for extrusion ;BEFORE_LAYER_CHANGE ``` But if I print this",
"end with a `0A` line feed character, including mine. Why isn't my printer",
"filament ran out. I thought I'd create a filament profile in Slic3r and",
"G-code\" block that gets inserted at the beginning of the exported gcode file.",
"a problem with line endings, but looking at the file in a hex",
"I print this gcode file, I see no message, and when checking the",
"well with the filament sensor on my Prosi i3 MK3. The translucency trips",
"isn't my printer doing anything with the M406 and M117 messages? Full gcode",
"trips up the sensor, making it think the filament ran out. I thought",
"a filament profile in Slic3r and disable the sensor in the \"Start G-code\"",
"menu while printing, the sensor is still on. I thought I might have",
"Filament gcode M406 ; Disable filament sensor M117 Filament sensor OFF G21 ;",
"the \"Filament sensor OFF\" message. If I look in the gcode, it's there:",
"of translucent PLA filament that doesn't work well with the filament sensor on",
"gcode, it's there: ``` G92 E0.0 M221 S95 M900 K30; Filament gcode M406",
"sensor in the \"Tune\" menu while printing, the sensor is still on. I",
"first line is provided by Prosi's default PLA profile. The second line should",
"a `0A` line feed character, including mine. Why isn't my printer doing anything",
"have a problem with line endings, but looking at the file in a",
"M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode M406 ; Disable filament sensor M117 Filament sensor",
"; use absolute coordinates M83 ; use relative distances for extrusion ;BEFORE_LAYER_CHANGE ```",
"sensor in the \"Start G-code\" block that gets inserted at the beginning of",
"units to millimeters G90 ; use absolute coordinates M83 ; use relative distances",
"but looking at the file in a hex editor, all the lines seem",
"gcode file. I've got the following code: ``` M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode",
"have a spool of translucent PLA filament that doesn't work well with the",
"``` The first line is provided by Prosi's default PLA profile. The second",
"M117 Filament sensor OFF G21 ; set units to millimeters G90 ; use",
"I've got the following code: ``` M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode M406 ;",
"file. I've got the following code: ``` M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode M406",
"sensor OFF G21 ; set units to millimeters G90 ; use absolute coordinates",
"that gets inserted at the beginning of the exported gcode file. I've got",
"the \"Start G-code\" block that gets inserted at the beginning of the exported",
"translucent PLA filament that doesn't work well with the filament sensor on my",
"the third line should print the \"Filament sensor OFF\" message. If I look",
"sensor, making it think the filament ran out. I thought I'd create a",
"file, I see no message, and when checking the sensor in the \"Tune\"",
"thought I'd create a filament profile in Slic3r and disable the sensor in",
"OFF\" message. If I look in the gcode, it's there: ``` G92 E0.0",
"Prosi's default PLA profile. The second line should disable the sensor, and the",
"file in a hex editor, all the lines seem to end with a",
"at the file in a hex editor, all the lines seem to end",
"hex editor, all the lines seem to end with a `0A` line feed",
"Slic3r and disable the sensor in the \"Start G-code\" block that gets inserted",
"inserted at the beginning of the exported gcode file. I've got the following",
"doesn't work well with the filament sensor on my Prosi i3 MK3. The",
"sensor on my Prosi i3 MK3. The translucency trips up the sensor, making",
"K30; Filament gcode M406 ; Disable filament sensor M117 Filament sensor OFF G21",
"line feed character, including mine. Why isn't my printer doing anything with the",
"is provided by Prosi's default PLA profile. The second line should disable the",
"should print the \"Filament sensor OFF\" message. If I look in the gcode,",
"the following code: ``` M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode M406 ; Disable filament",
"second line should disable the sensor, and the third line should print the",
"I might have a problem with line endings, but looking at the file",
"the file in a hex editor, all the lines seem to end with",
"the sensor in the \"Start G-code\" block that gets inserted at the beginning",
"PLA profile. The second line should disable the sensor, and the third line",
"gcode M406 ; Disable filament sensor M117 Filament sensor OFF ``` The first",
"problem with line endings, but looking at the file in a hex editor,",
"in Slic3r and disable the sensor in the \"Start G-code\" block that gets",
"up the sensor, making it think the filament ran out. I thought I'd",
"disable the sensor, and the third line should print the \"Filament sensor OFF\"",
"; Disable filament sensor M117 Filament sensor OFF ``` The first line is",
"while printing, the sensor is still on. I thought I might have a",
"this gcode file, I see no message, and when checking the sensor in",
"I thought I might have a problem with line endings, but looking at",
"editor, all the lines seem to end with a `0A` line feed character,",
"provided by Prosi's default PLA profile. The second line should disable the sensor,",
"\"Start G-code\" block that gets inserted at the beginning of the exported gcode",
"print the \"Filament sensor OFF\" message. If I look in the gcode, it's",
"message, and when checking the sensor in the \"Tune\" menu while printing, the",
"look in the gcode, it's there: ``` G92 E0.0 M221 S95 M900 K30;",
"seem to end with a `0A` line feed character, including mine. Why isn't",
"message. If I look in the gcode, it's there: ``` G92 E0.0 M221",
"character, including mine. Why isn't my printer doing anything with the M406 and",
"translucency trips up the sensor, making it think the filament ran out. I",
"beginning of the exported gcode file. I've got the following code: ``` M900",
"filament profile in Slic3r and disable the sensor in the \"Start G-code\" block",
"use relative distances for extrusion ;BEFORE_LAYER_CHANGE ``` But if I print this gcode",
"that doesn't work well with the filament sensor on my Prosi i3 MK3.",
"printer doing anything with the M406 and M117 messages? Full gcode file [here](https://pastebin.com/YDTN2Qes).",
"``` G92 E0.0 M221 S95 M900 K30; Filament gcode M406 ; Disable filament",
"on my Prosi i3 MK3. The translucency trips up the sensor, making it",
"the sensor, and the third line should print the \"Filament sensor OFF\" message.",
"The translucency trips up the sensor, making it think the filament ran out.",
"my printer doing anything with the M406 and M117 messages? Full gcode file",
"Disable filament sensor M117 Filament sensor OFF G21 ; set units to millimeters",
"see no message, and when checking the sensor in the \"Tune\" menu while",
"should disable the sensor, and the third line should print the \"Filament sensor",
"third line should print the \"Filament sensor OFF\" message. If I look in",
"sensor is still on. I thought I might have a problem with line",
"and when checking the sensor in the \"Tune\" menu while printing, the sensor",
"the filament sensor on my Prosi i3 MK3. The translucency trips up the",
"line should disable the sensor, and the third line should print the \"Filament",
"Filament sensor OFF G21 ; set units to millimeters G90 ; use absolute",
"K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode M406 ; Disable filament sensor M117 Filament sensor OFF",
"E0.0 M221 S95 M900 K30; Filament gcode M406 ; Disable filament sensor M117",
"the sensor in the \"Tune\" menu while printing, the sensor is still on.",
"when checking the sensor in the \"Tune\" menu while printing, the sensor is",
"filament sensor M117 Filament sensor OFF G21 ; set units to millimeters G90",
"MK3. The translucency trips up the sensor, making it think the filament ran",
"I'd create a filament profile in Slic3r and disable the sensor in the",
"But if I print this gcode file, I see no message, and when",
"out. I thought I'd create a filament profile in Slic3r and disable the",
"might have a problem with line endings, but looking at the file in",
"on. I thought I might have a problem with line endings, but looking",
"sensor M117 Filament sensor OFF ``` The first line is provided by Prosi's",
"and disable the sensor in the \"Start G-code\" block that gets inserted at",
"if I print this gcode file, I see no message, and when checking",
"PLA filament that doesn't work well with the filament sensor on my Prosi",
"G21 ; set units to millimeters G90 ; use absolute coordinates M83 ;",
"\"Tune\" menu while printing, the sensor is still on. I thought I might",
"is still on. I thought I might have a problem with line endings,",
"exported gcode file. I've got the following code: ``` M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament",
"M83 ; use relative distances for extrusion ;BEFORE_LAYER_CHANGE ``` But if I print",
"filament that doesn't work well with the filament sensor on my Prosi i3",
"set units to millimeters G90 ; use absolute coordinates M83 ; use relative",
"filament sensor M117 Filament sensor OFF ``` The first line is provided by",
"lines seem to end with a `0A` line feed character, including mine. Why",
"it think the filament ran out. I thought I'd create a filament profile",
"by Prosi's default PLA profile. The second line should disable the sensor, and",
"i3 MK3. The translucency trips up the sensor, making it think the filament",
"my Prosi i3 MK3. The translucency trips up the sensor, making it think",
"making it think the filament ran out. I thought I'd create a filament",
"``` M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode M406 ; Disable filament sensor M117 Filament",
"use absolute coordinates M83 ; use relative distances for extrusion ;BEFORE_LAYER_CHANGE ``` But",
"Filament sensor OFF ``` The first line is provided by Prosi's default PLA",
"If I look in the gcode, it's there: ``` G92 E0.0 M221 S95",
"thought I might have a problem with line endings, but looking at the",
"`0A` line feed character, including mine. Why isn't my printer doing anything with",
"absolute coordinates M83 ; use relative distances for extrusion ;BEFORE_LAYER_CHANGE ``` But if",
"in a hex editor, all the lines seem to end with a `0A`",
"including mine. Why isn't my printer doing anything with the M406 and M117",
"the filament ran out. I thought I'd create a filament profile in Slic3r",
"a spool of translucent PLA filament that doesn't work well with the filament",
"M221 S95 M900 K30; Filament gcode M406 ; Disable filament sensor M117 Filament",
"S95 M900 K30; Filament gcode M406 ; Disable filament sensor M117 Filament sensor",
"relative distances for extrusion ;BEFORE_LAYER_CHANGE ``` But if I print this gcode file,",
"think the filament ran out. I thought I'd create a filament profile in",
"OFF ``` The first line is provided by Prosi's default PLA profile. The",
"M406 ; Disable filament sensor M117 Filament sensor OFF G21 ; set units",
"gets inserted at the beginning of the exported gcode file. I've got the",
"Filament gcode M406 ; Disable filament sensor M117 Filament sensor OFF ``` The",
"M406 ; Disable filament sensor M117 Filament sensor OFF ``` The first line",
"M900 K30; Filament gcode M406 ; Disable filament sensor M117 Filament sensor OFF",
"OFF G21 ; set units to millimeters G90 ; use absolute coordinates M83",
";BEFORE_LAYER_CHANGE ``` But if I print this gcode file, I see no message,",
"with line endings, but looking at the file in a hex editor, all",
"work well with the filament sensor on my Prosi i3 MK3. The translucency",
"with a `0A` line feed character, including mine. Why isn't my printer doing",
"The first line is provided by Prosi's default PLA profile. The second line",
"millimeters G90 ; use absolute coordinates M83 ; use relative distances for extrusion",
"\"Filament sensor OFF\" message. If I look in the gcode, it's there: ```",
"create a filament profile in Slic3r and disable the sensor in the \"Start",
"and the third line should print the \"Filament sensor OFF\" message. If I",
"the exported gcode file. I've got the following code: ``` M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif};",
"the lines seem to end with a `0A` line feed character, including mine.",
"got the following code: ``` M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode M406 ; Disable",
"gcode M406 ; Disable filament sensor M117 Filament sensor OFF G21 ; set",
"print this gcode file, I see no message, and when checking the sensor",
"of the exported gcode file. I've got the following code: ``` M900 K{if"
] |
[
"the issue seems to be that the driver is not recognized at all",
"the microstepping was set at 1/256 instead. Maybe somebody could tell me if",
"the Z axis, etc * Check the pins on `pins_RAMPS.h` and make sure",
"I performed the reverse calculation to find out that the actual microstepping on",
"assigned pins for serial RX/TX, but everything is exactly the same. I tried",
"TMC2208 drivers on my RAMPS board. I followed a very good step by",
"is 1/8. After more investigation, the issue seems to be that the driver",
"on \"legacy\" mode and software manipulation is not possible. Although I went through",
"something? **UPDATE:** After some more digging into it, here is what I've done",
"the printer to lift the Z axis by 5 mm, it lifts it",
"and now I also have 1/16 on configuration\\_adv.h file on Marlin 1.1.8 However",
"now I also have 1/16 on configuration\\_adv.h file on Marlin 1.1.8 However what",
"into it, here is what I've done so far: * Solder the pins",
"are available in my setting * Make a Y cable with the 1",
"anything regarding the steps/mm. Previously I had the Pololus, with 1/16 microstepping and",
"256 ``` which sounds like the microstepping was set at 1/256 instead. Maybe",
"could tell me if I missed something? **UPDATE:** After some more digging into",
"1 kOhm resistor for the TX pin * Hook everything up No matter",
"proceeded to change the assigned pins for serial RX/TX, but everything is exactly",
"the same. I tried a different Asquine (original), another RAMPS board and even",
"2.0 bugfix branches from Marlin. It seems that the driver is on \"legacy\"",
"the bridge pads for enabling UART communication * Solder the pin for the",
"sure they are available in my setting * Make a Y cable with",
"my setting * Make a Y cable with the 1 kOhm resistor for",
"1/16 microstepping, the same I had with my Pololus, I performed the reverse",
"tutorial and after some issues, I got it nearly to work. One problem",
"is exactly the same. I tried a different Asquine (original), another RAMPS board",
"Check the pins on `pins_RAMPS.h` and make sure they are available in my",
"reads: ``` msteps 256 ``` which sounds like the microstepping was set at",
"enable: USE\\_TMC2208, Enable debugging, selecting the Z axis, etc * Check the pins",
"setting * Make a Y cable with the 1 kOhm resistor for the",
"up No matter what I did, the motor moves twice as much as",
"like the microstepping was set at 1/256 instead. Maybe somebody could tell me",
"be that the driver is not recognized at all by the Marlin/Board. Thinking",
"to enable: USE\\_TMC2208, Enable debugging, selecting the Z axis, etc * Check the",
"a Y cable with the 1 kOhm resistor for the TX pin *",
"twice as much as requested. Although I set up 1/16 microstepping, the same",
"found this, [Bug: TMC2208 UART Communication uses wrong pins for SoftwareSerial #9396](https://github.com/MarlinFirmware/Marlin/issues/9396). I",
"* Solder the bridge pads for enabling UART communication * Solder the pin",
"my RAMPS board. I followed a very good step by step tutorial and",
"and I found this, [Bug: TMC2208 UART Communication uses wrong pins for SoftwareSerial",
"5 mm, it lifts it by 10 cm. I haven't changed anything regarding",
"the pins on `pins_RAMPS.h` and make sure they are available in my setting",
"what I've done so far: * Solder the pins on the driver. Original",
"1/8. After more investigation, the issue seems to be that the driver is",
"wrong pins for SoftwareSerial #9396](https://github.com/MarlinFirmware/Marlin/issues/9396). I proceeded to change the assigned pins for",
"to work. One problem I still have is that when I tell the",
"1.1.x and 2.0 bugfix branches from Marlin. It seems that the driver is",
"line which reads: ``` msteps 256 ``` which sounds like the microstepping was",
"with 1/16 microstepping and now I also have 1/16 on configuration\\_adv.h file on",
"I noticed when doing a `M122` is a line which reads: ``` msteps",
"some more digging into it, here is what I've done so far: *",
"had with my Pololus, I performed the reverse calculation to find out that",
"far: * Solder the pins on the driver. Original from Watterrot * Solder",
"`configuration_adv.h` on Marlin (1.1.8) and enable all that is to enable: USE\\_TMC2208, Enable",
"when I tell the printer to lift the Z axis by 5 mm,",
"the same I had with my Pololus, I performed the reverse calculation to",
"cable with the 1 kOhm resistor for the TX pin * Hook everything",
"performed the reverse calculation to find out that the actual microstepping on the",
"* Check the pins on `pins_RAMPS.h` and make sure they are available in",
"when doing a `M122` is a line which reads: ``` msteps 256 ```",
"UART Communication uses wrong pins for SoftwareSerial #9396](https://github.com/MarlinFirmware/Marlin/issues/9396). I proceeded to change the",
"Hook everything up No matter what I did, the motor moves twice as",
"by the Marlin/Board. Thinking that it was a problem with the TX/RX communication,",
"by step tutorial and after some issues, I got it nearly to work.",
"missed something? **UPDATE:** After some more digging into it, here is what I've",
"I got it nearly to work. One problem I still have is that",
"still have is that when I tell the printer to lift the Z",
"by 10 cm. I haven't changed anything regarding the steps/mm. Previously I had",
"for SoftwareSerial #9396](https://github.com/MarlinFirmware/Marlin/issues/9396). I proceeded to change the assigned pins for serial RX/TX,",
"tried a different Asquine (original), another RAMPS board and even the 1.1.x and",
"set up 1/16 microstepping, the same I had with my Pololus, I performed",
"to change the assigned pins for serial RX/TX, but everything is exactly the",
"the assigned pins for serial RX/TX, but everything is exactly the same. I",
"step tutorial and after some issues, I got it nearly to work. One",
"digging into it, here is what I've done so far: * Solder the",
"that the driver is on \"legacy\" mode and software manipulation is not possible.",
"so far: * Solder the pins on the driver. Original from Watterrot *",
"\"legacy\" mode and software manipulation is not possible. Although I went through the",
"up 1/16 microstepping, the same I had with my Pololus, I performed the",
"very good step by step tutorial and after some issues, I got it",
"axis by 5 mm, it lifts it by 10 cm. I haven't changed",
"the `configuration_adv.h` on Marlin (1.1.8) and enable all that is to enable: USE\\_TMC2208,",
"After more investigation, the issue seems to be that the driver is not",
"from Marlin. It seems that the driver is on \"legacy\" mode and software",
"the driver is 1/8. After more investigation, the issue seems to be that",
"a different Asquine (original), another RAMPS board and even the 1.1.x and 2.0",
"I set up 1/16 microstepping, the same I had with my Pololus, I",
"out that the actual microstepping on the driver is 1/8. After more investigation,",
"Thinking that it was a problem with the TX/RX communication, I dug into",
"got it nearly to work. One problem I still have is that when",
"which reads: ``` msteps 256 ``` which sounds like the microstepping was set",
"I haven't changed anything regarding the steps/mm. Previously I had the Pololus, with",
"noticed when doing a `M122` is a line which reads: ``` msteps 256",
"on the driver is 1/8. After more investigation, the issue seems to be",
"same I had with my Pololus, I performed the reverse calculation to find",
"#9396](https://github.com/MarlinFirmware/Marlin/issues/9396). I proceeded to change the assigned pins for serial RX/TX, but everything",
"1.1.8 However what I noticed when doing a `M122` is a line which",
"after some issues, I got it nearly to work. One problem I still",
"board and even the 1.1.x and 2.0 bugfix branches from Marlin. It seems",
"is not recognized at all by the Marlin/Board. Thinking that it was a",
"they are available in my setting * Make a Y cable with the",
"dug into the available info out there and I found this, [Bug: TMC2208",
"a line which reads: ``` msteps 256 ``` which sounds like the microstepping",
"installed two TMC2208 drivers on my RAMPS board. I followed a very good",
"Although I set up 1/16 microstepping, the same I had with my Pololus,",
"communication, I dug into the available info out there and I found this,",
"all that is to enable: USE\\_TMC2208, Enable debugging, selecting the Z axis, etc",
"* Solder the pins on the driver. Original from Watterrot * Solder the",
"out there and I found this, [Bug: TMC2208 UART Communication uses wrong pins",
"on the driver. Original from Watterrot * Solder the bridge pads for enabling",
"different Asquine (original), another RAMPS board and even the 1.1.x and 2.0 bugfix",
"RAMPS board and even the 1.1.x and 2.0 bugfix branches from Marlin. It",
"done so far: * Solder the pins on the driver. Original from Watterrot",
"it by 10 cm. I haven't changed anything regarding the steps/mm. Previously I",
"sounds like the microstepping was set at 1/256 instead. Maybe somebody could tell",
"the pins on the driver. Original from Watterrot * Solder the bridge pads",
"the actual microstepping on the driver is 1/8. After more investigation, the issue",
"Marlin/Board. Thinking that it was a problem with the TX/RX communication, I dug",
"in my setting * Make a Y cable with the 1 kOhm resistor",
"the communication heading upwards * Change the `configuration_adv.h` on Marlin (1.1.8) and enable",
"RAMPS board. I followed a very good step by step tutorial and after",
"actual microstepping on the driver is 1/8. After more investigation, the issue seems",
"for the communication heading upwards * Change the `configuration_adv.h` on Marlin (1.1.8) and",
"drivers on my RAMPS board. I followed a very good step by step",
"board. I followed a very good step by step tutorial and after some",
"my Pololus, I performed the reverse calculation to find out that the actual",
"No matter what I did, the motor moves twice as much as requested.",
"which sounds like the microstepping was set at 1/256 instead. Maybe somebody could",
"recognized at all by the Marlin/Board. Thinking that it was a problem with",
"driver is on \"legacy\" mode and software manipulation is not possible. Although I",
"I still have is that when I tell the printer to lift the",
"mm, it lifts it by 10 cm. I haven't changed anything regarding the",
"debugging, selecting the Z axis, etc * Check the pins on `pins_RAMPS.h` and",
"the TX pin * Hook everything up No matter what I did, the",
"TX pin * Hook everything up No matter what I did, the motor",
"step by step tutorial and after some issues, I got it nearly to",
"Y cable with the 1 kOhm resistor for the TX pin * Hook",
"even the 1.1.x and 2.0 bugfix branches from Marlin. It seems that the",
"same. I tried a different Asquine (original), another RAMPS board and even the",
"what I did, the motor moves twice as much as requested. Although I",
"tell me if I missed something? **UPDATE:** After some more digging into it,",
"After some more digging into it, here is what I've done so far:",
"at all by the Marlin/Board. Thinking that it was a problem with the",
"there and I found this, [Bug: TMC2208 UART Communication uses wrong pins for",
"the Marlin/Board. Thinking that it was a problem with the TX/RX communication, I",
"software manipulation is not possible. Although I went through the steps to enable",
"for serial RX/TX, but everything is exactly the same. I tried a different",
"this, [Bug: TMC2208 UART Communication uses wrong pins for SoftwareSerial #9396](https://github.com/MarlinFirmware/Marlin/issues/9396). I proceeded",
"I found this, [Bug: TMC2208 UART Communication uses wrong pins for SoftwareSerial #9396](https://github.com/MarlinFirmware/Marlin/issues/9396).",
"I've just installed two TMC2208 drivers on my RAMPS board. I followed a",
"Pololus, I performed the reverse calculation to find out that the actual microstepping",
"more investigation, the issue seems to be that the driver is not recognized",
"here is what I've done so far: * Solder the pins on the",
"``` which sounds like the microstepping was set at 1/256 instead. Maybe somebody",
"regarding the steps/mm. Previously I had the Pololus, with 1/16 microstepping and now",
"set at 1/256 instead. Maybe somebody could tell me if I missed something?",
"me if I missed something? **UPDATE:** After some more digging into it, here",
"what I noticed when doing a `M122` is a line which reads: ```",
"exactly the same. I tried a different Asquine (original), another RAMPS board and",
"microstepping, the same I had with my Pololus, I performed the reverse calculation",
"that the actual microstepping on the driver is 1/8. After more investigation, the",
"USE\\_TMC2208, Enable debugging, selecting the Z axis, etc * Check the pins on",
"`pins_RAMPS.h` and make sure they are available in my setting * Make a",
"and after some issues, I got it nearly to work. One problem I",
"it lifts it by 10 cm. I haven't changed anything regarding the steps/mm.",
"communication * Solder the pin for the communication heading upwards * Change the",
"1/256 instead. Maybe somebody could tell me if I missed something? **UPDATE:** After",
"However what I noticed when doing a `M122` is a line which reads:",
"1/16 microstepping and now I also have 1/16 on configuration\\_adv.h file on Marlin",
"on Marlin 1.1.8 However what I noticed when doing a `M122` is a",
"from Watterrot * Solder the bridge pads for enabling UART communication * Solder",
"Solder the pins on the driver. Original from Watterrot * Solder the bridge",
"RX/TX, but everything is exactly the same. I tried a different Asquine (original),",
"available info out there and I found this, [Bug: TMC2208 UART Communication uses",
"the steps/mm. Previously I had the Pololus, with 1/16 microstepping and now I",
"on my RAMPS board. I followed a very good step by step tutorial",
"I also have 1/16 on configuration\\_adv.h file on Marlin 1.1.8 However what I",
"`M122` is a line which reads: ``` msteps 256 ``` which sounds like",
"info out there and I found this, [Bug: TMC2208 UART Communication uses wrong",
"change the assigned pins for serial RX/TX, but everything is exactly the same.",
"branches from Marlin. It seems that the driver is on \"legacy\" mode and",
"and even the 1.1.x and 2.0 bugfix branches from Marlin. It seems that",
"just installed two TMC2208 drivers on my RAMPS board. I followed a very",
"work. One problem I still have is that when I tell the printer",
"serial RX/TX, but everything is exactly the same. I tried a different Asquine",
"instead. Maybe somebody could tell me if I missed something? **UPDATE:** After some",
"Pololus, with 1/16 microstepping and now I also have 1/16 on configuration\\_adv.h file",
"was a problem with the TX/RX communication, I dug into the available info",
"manipulation is not possible. Although I went through the steps to enable it.",
"the TX/RX communication, I dug into the available info out there and I",
"lift the Z axis by 5 mm, it lifts it by 10 cm.",
"it nearly to work. One problem I still have is that when I",
"kOhm resistor for the TX pin * Hook everything up No matter what",
"microstepping on the driver is 1/8. After more investigation, the issue seems to",
"Solder the bridge pads for enabling UART communication * Solder the pin for",
"everything is exactly the same. I tried a different Asquine (original), another RAMPS",
"Marlin (1.1.8) and enable all that is to enable: USE\\_TMC2208, Enable debugging, selecting",
"a problem with the TX/RX communication, I dug into the available info out",
"enable all that is to enable: USE\\_TMC2208, Enable debugging, selecting the Z axis,",
"the driver is on \"legacy\" mode and software manipulation is not possible. Although",
"by 5 mm, it lifts it by 10 cm. I haven't changed anything",
"(1.1.8) and enable all that is to enable: USE\\_TMC2208, Enable debugging, selecting the",
"for enabling UART communication * Solder the pin for the communication heading upwards",
"Marlin. It seems that the driver is on \"legacy\" mode and software manipulation",
"pins for SoftwareSerial #9396](https://github.com/MarlinFirmware/Marlin/issues/9396). I proceeded to change the assigned pins for serial",
"pins for serial RX/TX, but everything is exactly the same. I tried a",
"Asquine (original), another RAMPS board and even the 1.1.x and 2.0 bugfix branches",
"configuration\\_adv.h file on Marlin 1.1.8 However what I noticed when doing a `M122`",
"Previously I had the Pololus, with 1/16 microstepping and now I also have",
"I missed something? **UPDATE:** After some more digging into it, here is what",
"the driver. Original from Watterrot * Solder the bridge pads for enabling UART",
"did, the motor moves twice as much as requested. Although I set up",
"issue seems to be that the driver is not recognized at all by",
"I tried a different Asquine (original), another RAMPS board and even the 1.1.x",
"is that when I tell the printer to lift the Z axis by",
"Communication uses wrong pins for SoftwareSerial #9396](https://github.com/MarlinFirmware/Marlin/issues/9396). I proceeded to change the assigned",
"calculation to find out that the actual microstepping on the driver is 1/8.",
"uses wrong pins for SoftwareSerial #9396](https://github.com/MarlinFirmware/Marlin/issues/9396). I proceeded to change the assigned pins",
"two TMC2208 drivers on my RAMPS board. I followed a very good step",
"it, here is what I've done so far: * Solder the pins on",
"the available info out there and I found this, [Bug: TMC2208 UART Communication",
"another RAMPS board and even the 1.1.x and 2.0 bugfix branches from Marlin.",
"to lift the Z axis by 5 mm, it lifts it by 10",
"(original), another RAMPS board and even the 1.1.x and 2.0 bugfix branches from",
"have 1/16 on configuration\\_adv.h file on Marlin 1.1.8 However what I noticed when",
"driver. Original from Watterrot * Solder the bridge pads for enabling UART communication",
"somebody could tell me if I missed something? **UPDATE:** After some more digging",
"with the TX/RX communication, I dug into the available info out there and",
"it was a problem with the TX/RX communication, I dug into the available",
"msteps 256 ``` which sounds like the microstepping was set at 1/256 instead.",
"seems to be that the driver is not recognized at all by the",
"followed a very good step by step tutorial and after some issues, I",
"the Pololus, with 1/16 microstepping and now I also have 1/16 on configuration\\_adv.h",
"Change the `configuration_adv.h` on Marlin (1.1.8) and enable all that is to enable:",
"10 cm. I haven't changed anything regarding the steps/mm. Previously I had the",
"heading upwards * Change the `configuration_adv.h` on Marlin (1.1.8) and enable all that",
"find out that the actual microstepping on the driver is 1/8. After more",
"that when I tell the printer to lift the Z axis by 5",
"Z axis, etc * Check the pins on `pins_RAMPS.h` and make sure they",
"as requested. Although I set up 1/16 microstepping, the same I had with",
"more digging into it, here is what I've done so far: * Solder",
"doing a `M122` is a line which reads: ``` msteps 256 ``` which",
"much as requested. Although I set up 1/16 microstepping, the same I had",
"on `pins_RAMPS.h` and make sure they are available in my setting * Make",
"haven't changed anything regarding the steps/mm. Previously I had the Pololus, with 1/16",
"and make sure they are available in my setting * Make a Y",
"TX/RX communication, I dug into the available info out there and I found",
"steps/mm. Previously I had the Pololus, with 1/16 microstepping and now I also",
"axis, etc * Check the pins on `pins_RAMPS.h` and make sure they are",
"mode and software manipulation is not possible. Although I went through the steps",
"Maybe somebody could tell me if I missed something? **UPDATE:** After some more",
"not recognized at all by the Marlin/Board. Thinking that it was a problem",
"had the Pololus, with 1/16 microstepping and now I also have 1/16 on",
"problem I still have is that when I tell the printer to lift",
"available in my setting * Make a Y cable with the 1 kOhm",
"a very good step by step tutorial and after some issues, I got",
"the pin for the communication heading upwards * Change the `configuration_adv.h` on Marlin",
"at 1/256 instead. Maybe somebody could tell me if I missed something? **UPDATE:**",
"is on \"legacy\" mode and software manipulation is not possible. Although I went",
"everything up No matter what I did, the motor moves twice as much",
"make sure they are available in my setting * Make a Y cable",
"a `M122` is a line which reads: ``` msteps 256 ``` which sounds",
"SoftwareSerial #9396](https://github.com/MarlinFirmware/Marlin/issues/9396). I proceeded to change the assigned pins for serial RX/TX, but",
"Watterrot * Solder the bridge pads for enabling UART communication * Solder the",
"One problem I still have is that when I tell the printer to",
"pin * Hook everything up No matter what I did, the motor moves",
"reverse calculation to find out that the actual microstepping on the driver is",
"the driver is not recognized at all by the Marlin/Board. Thinking that it",
"lifts it by 10 cm. I haven't changed anything regarding the steps/mm. Previously",
"bugfix branches from Marlin. It seems that the driver is on \"legacy\" mode",
"good step by step tutorial and after some issues, I got it nearly",
"Enable debugging, selecting the Z axis, etc * Check the pins on `pins_RAMPS.h`",
"changed anything regarding the steps/mm. Previously I had the Pololus, with 1/16 microstepping",
"file on Marlin 1.1.8 However what I noticed when doing a `M122` is",
"the Z axis by 5 mm, it lifts it by 10 cm. I",
"cm. I haven't changed anything regarding the steps/mm. Previously I had the Pololus,",
"I dug into the available info out there and I found this, [Bug:",
"seems that the driver is on \"legacy\" mode and software manipulation is not",
"and enable all that is to enable: USE\\_TMC2208, Enable debugging, selecting the Z",
"driver is not recognized at all by the Marlin/Board. Thinking that it was",
"if I missed something? **UPDATE:** After some more digging into it, here is",
"* Change the `configuration_adv.h` on Marlin (1.1.8) and enable all that is to",
"**UPDATE:** After some more digging into it, here is what I've done so",
"issues, I got it nearly to work. One problem I still have is",
"* Solder the pin for the communication heading upwards * Change the `configuration_adv.h`",
"investigation, the issue seems to be that the driver is not recognized at",
"Z axis by 5 mm, it lifts it by 10 cm. I haven't",
"is what I've done so far: * Solder the pins on the driver.",
"pads for enabling UART communication * Solder the pin for the communication heading",
"to find out that the actual microstepping on the driver is 1/8. After",
"I did, the motor moves twice as much as requested. Although I set",
"to be that the driver is not recognized at all by the Marlin/Board.",
"It seems that the driver is on \"legacy\" mode and software manipulation is",
"was set at 1/256 instead. Maybe somebody could tell me if I missed",
"I followed a very good step by step tutorial and after some issues,",
"TMC2208 UART Communication uses wrong pins for SoftwareSerial #9396](https://github.com/MarlinFirmware/Marlin/issues/9396). I proceeded to change",
"is a line which reads: ``` msteps 256 ``` which sounds like the",
"I've done so far: * Solder the pins on the driver. Original from",
"Original from Watterrot * Solder the bridge pads for enabling UART communication *",
"the reverse calculation to find out that the actual microstepping on the driver",
"that is to enable: USE\\_TMC2208, Enable debugging, selecting the Z axis, etc *",
"* Hook everything up No matter what I did, the motor moves twice",
"matter what I did, the motor moves twice as much as requested. Although",
"Make a Y cable with the 1 kOhm resistor for the TX pin",
"1/16 on configuration\\_adv.h file on Marlin 1.1.8 However what I noticed when doing",
"driver is 1/8. After more investigation, the issue seems to be that the",
"``` msteps 256 ``` which sounds like the microstepping was set at 1/256",
"and 2.0 bugfix branches from Marlin. It seems that the driver is on",
"I proceeded to change the assigned pins for serial RX/TX, but everything is",
"etc * Check the pins on `pins_RAMPS.h` and make sure they are available",
"with the 1 kOhm resistor for the TX pin * Hook everything up",
"that the driver is not recognized at all by the Marlin/Board. Thinking that",
"on Marlin (1.1.8) and enable all that is to enable: USE\\_TMC2208, Enable debugging,",
"but everything is exactly the same. I tried a different Asquine (original), another",
"some issues, I got it nearly to work. One problem I still have",
"microstepping and now I also have 1/16 on configuration\\_adv.h file on Marlin 1.1.8",
"upwards * Change the `configuration_adv.h` on Marlin (1.1.8) and enable all that is",
"moves twice as much as requested. Although I set up 1/16 microstepping, the",
"Solder the pin for the communication heading upwards * Change the `configuration_adv.h` on",
"the 1.1.x and 2.0 bugfix branches from Marlin. It seems that the driver",
"motor moves twice as much as requested. Although I set up 1/16 microstepping,",
"have is that when I tell the printer to lift the Z axis",
"that it was a problem with the TX/RX communication, I dug into the",
"pins on `pins_RAMPS.h` and make sure they are available in my setting *",
"microstepping was set at 1/256 instead. Maybe somebody could tell me if I",
"the motor moves twice as much as requested. Although I set up 1/16",
"also have 1/16 on configuration\\_adv.h file on Marlin 1.1.8 However what I noticed",
"and software manipulation is not possible. Although I went through the steps to",
"I had the Pololus, with 1/16 microstepping and now I also have 1/16",
"for the TX pin * Hook everything up No matter what I did,",
"pins on the driver. Original from Watterrot * Solder the bridge pads for",
"communication heading upwards * Change the `configuration_adv.h` on Marlin (1.1.8) and enable all",
"with my Pololus, I performed the reverse calculation to find out that the",
"Marlin 1.1.8 However what I noticed when doing a `M122` is a line",
"selecting the Z axis, etc * Check the pins on `pins_RAMPS.h` and make",
"on configuration\\_adv.h file on Marlin 1.1.8 However what I noticed when doing a",
"as much as requested. Although I set up 1/16 microstepping, the same I",
"nearly to work. One problem I still have is that when I tell",
"printer to lift the Z axis by 5 mm, it lifts it by",
"UART communication * Solder the pin for the communication heading upwards * Change",
"all by the Marlin/Board. Thinking that it was a problem with the TX/RX",
"resistor for the TX pin * Hook everything up No matter what I",
"is to enable: USE\\_TMC2208, Enable debugging, selecting the Z axis, etc * Check",
"I tell the printer to lift the Z axis by 5 mm, it",
"tell the printer to lift the Z axis by 5 mm, it lifts",
"the 1 kOhm resistor for the TX pin * Hook everything up No",
"[Bug: TMC2208 UART Communication uses wrong pins for SoftwareSerial #9396](https://github.com/MarlinFirmware/Marlin/issues/9396). I proceeded to",
"pin for the communication heading upwards * Change the `configuration_adv.h` on Marlin (1.1.8)",
"bridge pads for enabling UART communication * Solder the pin for the communication",
"problem with the TX/RX communication, I dug into the available info out there",
"into the available info out there and I found this, [Bug: TMC2208 UART",
"I had with my Pololus, I performed the reverse calculation to find out",
"enabling UART communication * Solder the pin for the communication heading upwards *",
"requested. Although I set up 1/16 microstepping, the same I had with my",
"* Make a Y cable with the 1 kOhm resistor for the TX"
] |
[
"little part (inside the transparent cube below) will be printed?** [](https://i.stack.imgur.com/hJflC.png) I've placed the model upside-down on the Cura plate to \"cut off\"",
"overlaps\" for that). I've tried using \"GechKz fixes: disable Union Overlapping Volumes\" and",
"part I want to print is the one inside the transparent cube](https://i.stack.imgur.com/hJflC.png)](https://i.stack.imgur.com/hJflC.png) I've",
"model in Blender and placed it so it intersect with the part I",
"on the Cura plate to \"cut off\" what was well printed. I've made",
"I want to reprint only that little part. How can I do that",
"I want to print is the one inside the transparent cube](https://i.stack.imgur.com/hJflC.png)](https://i.stack.imgur.com/hJflC.png) I've placed",
"plate to \"cut off\" what was well printed. I've made a simple 3D",
"[](https://i.stack.imgur.com/hJflC.png)",
"with the part I want to print (I've set the \"mesh type\" of",
"to print is the one inside the transparent cube](https://i.stack.imgur.com/hJflC.png)](https://i.stack.imgur.com/hJflC.png) I've placed the model",
"is the one inside the transparent cube](https://i.stack.imgur.com/hJflC.png)](https://i.stack.imgur.com/hJflC.png) I've placed the model upside-down on",
"**How can I tell Cura to generate a gcode file so only that",
"the model origin (which I don't want). What's the proper way to do",
"the Cura plate to \"cut off\" what was well printed. I've made a",
"intersect with the part I want to print (I've set the \"mesh type\"",
"model upside-down on the Cura plate to \"cut off\" what was well printed.",
"I've made a 9H-printing model tonight, and only a little part of it",
"I do that in Cura? **How can I tell Cura to generate a",
"printed?** [](https://i.stack.imgur.com/hJflC.png) I've placed the model upside-down on the Cura plate to",
"merge aligns the cube origin and the model origin (which I don't want).",
"can I tell Cura to generate a gcode file so only that little",
"3D cube model in Blender and placed it so it intersect with the",
"\"mesh type\" of that cube to \"don't support overlaps\" for that). I've tried",
"model origin (which I don't want). What's the proper way to do such",
"of it failed (because a support dropped off). I want to reprint only",
"and the \"Merge meshes\" option, but the merge aligns the cube origin and",
"Blender and placed it so it intersect with the part I want to",
"cube origin and the model origin (which I don't want). What's the proper",
"can I do that in Cura? **How can I tell Cura to generate",
"Overlapping Volumes\" and the \"Merge meshes\" option, but the merge aligns the cube",
"using \"GechKz fixes: disable Union Overlapping Volumes\" and the \"Merge meshes\" option, but",
"a simple 3D cube model in Blender and placed it so it intersect",
"for that). I've tried using \"GechKz fixes: disable Union Overlapping Volumes\" and the",
"the cube origin and the model origin (which I don't want). What's the",
"Union Overlapping Volumes\" and the \"Merge meshes\" option, but the merge aligns the",
"\"GechKz fixes: disable Union Overlapping Volumes\" and the \"Merge meshes\" option, but the",
"that little part (inside the transparent cube below) will be printed?** [](https://i.stack.imgur.com/hJflC.png) I've placed the model upside-down",
"cube model in Blender and placed it so it intersect with the part",
"so it intersect with the part I want to print (I've set the",
"I've made a simple 3D cube model in Blender and placed it so",
"and only a little part of it failed (because a support dropped off).",
"it failed (because a support dropped off). I want to reprint only that",
"(because a support dropped off). I want to reprint only that little part.",
"print (I've set the \"mesh type\" of that cube to \"don't support overlaps\"",
"be printed?** [](https://i.stack.imgur.com/hJflC.png) I've placed the",
"want to print (I've set the \"mesh type\" of that cube to \"don't",
"to generate a gcode file so only that little part (inside the transparent",
"\"don't support overlaps\" for that). I've tried using \"GechKz fixes: disable Union Overlapping",
"option, but the merge aligns the cube origin and the model origin (which",
"off\" what was well printed. I've made a simple 3D cube model in",
"Volumes\" and the \"Merge meshes\" option, but the merge aligns the cube origin",
"part (inside the transparent cube below) will be printed?** [](https://i.stack.imgur.com/hJflC.png) I've placed the model upside-down on the Cura plate to \"cut",
"I've placed the model upside-down on the Cura plate to \"cut off\" what",
"part I want to print (I've set the \"mesh type\" of that cube",
"inside the transparent cube](https://i.stack.imgur.com/hJflC.png)](https://i.stack.imgur.com/hJflC.png) I've placed the model upside-down on the Cura plate",
"the merge aligns the cube origin and the model origin (which I don't",
"part of it failed (because a support dropped off). I want to reprint",
"to reprint only that little part. How can I do that in Cura?",
"a 9H-printing model tonight, and only a little part of it failed (because",
"simple 3D cube model in Blender and placed it so it intersect with",
"origin and the model origin (which I don't want). What's the proper way",
"I want to print (I've set the \"mesh type\" of that cube to",
"but the merge aligns the cube origin and the model origin (which I",
"cube to \"don't support overlaps\" for that). I've tried using \"GechKz fixes: disable",
"off). I want to reprint only that little part. How can I do",
"generate a gcode file so only that little part (inside the transparent cube",
"the part I want to print (I've set the \"mesh type\" of that",
"that in Cura? **How can I tell Cura to generate a gcode file",
"support overlaps\" for that). I've tried using \"GechKz fixes: disable Union Overlapping Volumes\"",
"dropped off). I want to reprint only that little part. How can I",
"made a 9H-printing model tonight, and only a little part of it failed",
"support dropped off). I want to reprint only that little part. How can",
"the one inside the transparent cube](https://i.stack.imgur.com/hJflC.png)](https://i.stack.imgur.com/hJflC.png) I've placed the model upside-down on the",
"tonight, and only a little part of it failed (because a support dropped",
"was well printed. I've made a simple 3D cube model in Blender and",
"below) will be printed?** [](https://i.stack.imgur.com/hJflC.png) I've placed the model upside-down on the Cura",
"upside-down on the Cura plate to \"cut off\" what was well printed. I've",
"a gcode file so only that little part (inside the transparent cube below)",
"a little part of it failed (because a support dropped off). I want",
"(I've set the \"mesh type\" of that cube to \"don't support overlaps\" for",
"the model upside-down on the Cura plate to \"cut off\" what was well",
"I tell Cura to generate a gcode file so only that little part"
] |
[
"a clue whats the issue? [](https://i.stack.imgur.com/oeept.png) [](https://i.stack.imgur.com/CEvrT.jpg)",
"is also the starting point of the print) is always bigger than the",
"thickness (starting from the thick edge) starts very thin and gets thicker till",
"issue? [](https://i.stack.imgur.com/oeept.png) [](https://i.stack.imgur.com/CEvrT.jpg) [](https://i.stack.imgur.com/eZmxi.jpg)",
"than the other three. Additionally, the walls do not have the same thickness",
"print) is always bigger than the other three. Additionally, the walls do not",
"as well. The wall thickness (starting from the thick edge) starts very thin",
"The wall thickness (starting from the thick edge) starts very thin and gets",
"always bigger than the other three. Additionally, the walls do not have the",
"thick edge again. Does anyone have a clue whats the issue? [](https://i.stack.imgur.com/oeept.png) [](https://i.stack.imgur.com/oeept.png) [](https://i.stack.imgur.com/CEvrT.jpg) [](https://i.stack.imgur.com/oeept.png) [](https://i.stack.imgur.com/CEvrT.jpg) [](https://i.stack.imgur.com/oeept.png) [](https://i.stack.imgur.com/CEvrT.jpg) [](https://i.stack.imgur.com/oeept.png) [](https://i.stack.imgur.com/oeept.png)",
"three. Additionally, the walls do not have the same thickness as well. The",
"thin and gets thicker till reaching the thick edge again. Does anyone have",
"noticed that one edge (which is also the starting point of the print)",
"from the thick edge) starts very thin and gets thicker till reaching the",
"have a clue whats the issue? [](https://i.stack.imgur.com/oeept.png) [![enter image description",
"I noticed that one edge (which is also the starting point of the",
"gets thicker till reaching the thick edge again. Does anyone have a clue",
"of the print) is always bigger than the other three. Additionally, the walls",
"is always bigger than the other three. Additionally, the walls do not have",
"thickness as well. The wall thickness (starting from the thick edge) starts very",
"starting point of the print) is always bigger than the other three. Additionally,",
"other three. Additionally, the walls do not have the same thickness as well.",
"have the same thickness as well. The wall thickness (starting from the thick"
] |
[
"would you go about in getting the exact measurements of that white rod?",
"chair. For that, I'm designing a 3d-printed part that's going to fit on",
"measurements of that white rod? I tried a caliper, and I'm able to",
"for my Sayl office chair. For that, I'm designing a 3d-printed part that's",
"that I want to get a more precise measurement. Is there any technique",
"chair. Check out this picture: [](https://i.stack.imgur.com/PMzGy.jpg) How would you go about in getting",
"a close estimate. But say that I want to get a more precise",
"Sayl office chair. For that, I'm designing a 3d-printed part that's going to",
"ellipse, which is probably a close estimate. But say that I want to",
"3d-printed part that's going to fit on one of the existing rods of",
"that, I'm designing a 3d-printed part that's going to fit on one of",
"and I'm able to get the width and depth, and I can just",
"say that I want to get a more precise measurement. Is there any",
"I tried a caliper, and I'm able to get the width and depth,",
"I'm trying to build a headrest for my Sayl office chair. For that,",
"that white rod? I tried a caliper, and I'm able to get the",
"caliper, and I'm able to get the width and depth, and I can",
"For that, I'm designing a 3d-printed part that's going to fit on one",
"part that's going to fit on one of the existing rods of the",
"rod's profile is a perfect ellipse, which is probably a close estimate. But",
"perfect ellipse, which is probably a close estimate. But say that I want",
"that the rod's profile is a perfect ellipse, which is probably a close",
"But say that I want to get a more precise measurement. Is there",
"of that white rod? I tried a caliper, and I'm able to get",
"my Sayl office chair. For that, I'm designing a 3d-printed part that's going",
"close estimate. But say that I want to get a more precise measurement.",
"to build a headrest for my Sayl office chair. For that, I'm designing",
"can just assume that the rod's profile is a perfect ellipse, which is",
"trying to build a headrest for my Sayl office chair. For that, I'm",
"want to get a more precise measurement. Is there any technique to do",
"just assume that the rod's profile is a perfect ellipse, which is probably",
"a 3d-printed part that's going to fit on one of the existing rods",
"[](https://i.stack.imgur.com/PMzGy.jpg) How would you go about in getting the exact measurements of that",
"and I can just assume that the rod's profile is a perfect ellipse,",
"is a perfect ellipse, which is probably a close estimate. But say that",
"a perfect ellipse, which is probably a close estimate. But say that I",
"get the width and depth, and I can just assume that the rod's",
"to fit on one of the existing rods of the chair. Check out",
"the width and depth, and I can just assume that the rod's profile",
"and depth, and I can just assume that the rod's profile is a",
"able to get the width and depth, and I can just assume that",
"picture: [](https://i.stack.imgur.com/PMzGy.jpg) How would you go about in getting the exact measurements of",
"existing rods of the chair. Check out this picture: [](https://i.stack.imgur.com/PMzGy.jpg) How would you",
"assume that the rod's profile is a perfect ellipse, which is probably a",
"How would you go about in getting the exact measurements of that white",
"the existing rods of the chair. Check out this picture: [](https://i.stack.imgur.com/PMzGy.jpg) How would",
"depth, and I can just assume that the rod's profile is a perfect",
"one of the existing rods of the chair. Check out this picture: [](https://i.stack.imgur.com/PMzGy.jpg)",
"go about in getting the exact measurements of that white rod? I tried",
"that's going to fit on one of the existing rods of the chair.",
"about in getting the exact measurements of that white rod? I tried a",
"I want to get a more precise measurement. Is there any technique to",
"to get the width and depth, and I can just assume that the",
"getting the exact measurements of that white rod? I tried a caliper, and",
"I'm designing a 3d-printed part that's going to fit on one of the",
"a headrest for my Sayl office chair. For that, I'm designing a 3d-printed",
"exact measurements of that white rod? I tried a caliper, and I'm able",
"this picture: [](https://i.stack.imgur.com/PMzGy.jpg) How would you go about in getting the exact measurements",
"Check out this picture: [](https://i.stack.imgur.com/PMzGy.jpg) How would you go about in getting the",
"build a headrest for my Sayl office chair. For that, I'm designing a",
"you go about in getting the exact measurements of that white rod? I",
"of the existing rods of the chair. Check out this picture: [](https://i.stack.imgur.com/PMzGy.jpg) How",
"out this picture: [](https://i.stack.imgur.com/PMzGy.jpg) How would you go about in getting the exact",
"a caliper, and I'm able to get the width and depth, and I",
"which is probably a close estimate. But say that I want to get",
"going to fit on one of the existing rods of the chair. Check",
"of the chair. Check out this picture: [](https://i.stack.imgur.com/PMzGy.jpg) How would you go about",
"to get a more precise measurement. Is there any technique to do that?",
"the chair. Check out this picture: [](https://i.stack.imgur.com/PMzGy.jpg) How would you go about in",
"on one of the existing rods of the chair. Check out this picture:",
"I can just assume that the rod's profile is a perfect ellipse, which",
"the exact measurements of that white rod? I tried a caliper, and I'm",
"tried a caliper, and I'm able to get the width and depth, and",
"probably a close estimate. But say that I want to get a more",
"profile is a perfect ellipse, which is probably a close estimate. But say",
"headrest for my Sayl office chair. For that, I'm designing a 3d-printed part",
"rod? I tried a caliper, and I'm able to get the width and",
"width and depth, and I can just assume that the rod's profile is",
"is probably a close estimate. But say that I want to get a",
"the rod's profile is a perfect ellipse, which is probably a close estimate.",
"rods of the chair. Check out this picture: [](https://i.stack.imgur.com/PMzGy.jpg) How would you go",
"in getting the exact measurements of that white rod? I tried a caliper,",
"I'm able to get the width and depth, and I can just assume",
"fit on one of the existing rods of the chair. Check out this",
"designing a 3d-printed part that's going to fit on one of the existing",
"white rod? I tried a caliper, and I'm able to get the width",
"office chair. For that, I'm designing a 3d-printed part that's going to fit",
"estimate. But say that I want to get a more precise measurement. Is"
] |
[
"(as if the bed is bent) but I have used the edge of",
"printer where my nozzle isn't moving flat with my print bed (as if",
"flat. I have properly leveled my bed with a piece of paper and",
"checked the whole printer to make sure it's square but the problem continues.",
"I have properly leveled my bed with a piece of paper and have",
"the bolt and the play is gone but it didn't fix the problem.",
"whole printer to make sure it's square but the problem continues. What else",
"nozzle is closer to the bed in the center than it is near",
"good first layer. the printer is a FLsun Delta Kossel. The links don't",
"in the center than it is near the edge. I did some research",
"it's a calibration issue but I have no idea how to fix it.",
"The links don't appear to be loose. Is there a way I could",
"fix it. Does anyone know a quick and easy way to calibrate a",
"a bit and I found that the nozzle is closer to the bed",
"with my print bed (as if the bed is bent) but I have",
"comments) The gap grows and shrinks in a parabolic manner and it makes",
"first layer. the printer is a FLsun Delta Kossel. The links don't appear",
"around a bit and I found that the nozzle is closer to the",
"some research and it's a calibration issue but I have no idea how",
"and have checked the whole printer to make sure it's square but the",
"in one of the links, I tightened the bolt and the play is",
"found a bit of play in one of the links, I tightened the",
"Upon further inspection I found a bit of play in one of the",
"Does anyone know a quick and easy way to calibrate a Kossel Delta",
"don't appear to be loose. Is there a way I could share a",
"sure it's square but the problem continues. What else could be the problem?",
"the edge of my steel ruler and it seems to be perfectly flat.",
"been playing around a bit and I found that the nozzle is closer",
"### Addition info (from comments) The gap grows and shrinks in a parabolic",
"bit of play in one of the links, I tightened the bolt and",
"play is gone but it didn't fix the problem. I have been playing",
"video? Upon further inspection I found a bit of play in one of",
"where my nozzle isn't moving flat with my print bed (as if the",
"and I found that the nozzle is closer to the bed in the",
"could be the problem? ### Addition info (from comments) The gap grows and",
"it makes it impossible to get a good first layer. the printer is",
"but I have no idea how to fix it. Does anyone know a",
"tightened the bolt and the play is gone but it didn't fix the",
"parabolic manner and it makes it impossible to get a good first layer.",
"FLsun Delta Kossel. The links don't appear to be loose. Is there a",
"the links, I tightened the bolt and the play is gone but it",
"ruler and it seems to be perfectly flat. I have properly leveled my",
"leveled my bed with a piece of paper and have checked the whole",
"the bed is bent) but I have used the edge of my steel",
"seems to be perfectly flat. I have properly leveled my bed with a",
"nozzle isn't moving flat with my print bed (as if the bed is",
"have properly leveled my bed with a piece of paper and have checked",
"of my steel ruler and it seems to be perfectly flat. I have",
"square but the problem continues. What else could be the problem? ### Addition",
"edge of my steel ruler and it seems to be perfectly flat. I",
"way I could share a video? Upon further inspection I found a bit",
"the printer is a FLsun Delta Kossel. The links don't appear to be",
"delta 3D printer where my nozzle isn't moving flat with my print bed",
"anyone know a quick and easy way to calibrate a Kossel Delta 3D",
"Is there a way I could share a video? Upon further inspection I",
"have been playing around a bit and I found that the nozzle is",
"I found that the nozzle is closer to the bed in the center",
"the bed in the center than it is near the edge. I did",
"share a video? Upon further inspection I found a bit of play in",
"this problem with my delta 3D printer where my nozzle isn't moving flat",
"having this problem with my delta 3D printer where my nozzle isn't moving",
"problem continues. What else could be the problem? ### Addition info (from comments)",
"I could share a video? Upon further inspection I found a bit of",
"I have used the edge of my steel ruler and it seems to",
"perfectly flat. I have properly leveled my bed with a piece of paper",
"links don't appear to be loose. Is there a way I could share",
"make sure it's square but the problem continues. What else could be the",
"but I have used the edge of my steel ruler and it seems",
"it seems to be perfectly flat. I have properly leveled my bed with",
"printer to make sure it's square but the problem continues. What else could",
"and it makes it impossible to get a good first layer. the printer",
"to get a good first layer. the printer is a FLsun Delta Kossel.",
"to the bed in the center than it is near the edge. I",
"my delta 3D printer where my nozzle isn't moving flat with my print",
"I did some research and it's a calibration issue but I have no",
"manner and it makes it impossible to get a good first layer. the",
"playing around a bit and I found that the nozzle is closer to",
"bit and I found that the nozzle is closer to the bed in",
"be the problem? ### Addition info (from comments) The gap grows and shrinks",
"steel ruler and it seems to be perfectly flat. I have properly leveled",
"paper and have checked the whole printer to make sure it's square but",
"flat with my print bed (as if the bed is bent) but I",
"grows and shrinks in a parabolic manner and it makes it impossible to",
"I found a bit of play in one of the links, I tightened",
"have no idea how to fix it. Does anyone know a quick and",
"is a FLsun Delta Kossel. The links don't appear to be loose. Is",
"appear to be loose. Is there a way I could share a video?",
"a FLsun Delta Kossel. The links don't appear to be loose. Is there",
"my print bed (as if the bed is bent) but I have used",
"but it didn't fix the problem. I have been playing around a bit",
"have used the edge of my steel ruler and it seems to be",
"inspection I found a bit of play in one of the links, I",
"a calibration issue but I have no idea how to fix it. Does",
"a good first layer. the printer is a FLsun Delta Kossel. The links",
"the center than it is near the edge. I did some research and",
"What else could be the problem? ### Addition info (from comments) The gap",
"problem. I have been playing around a bit and I found that the",
"it. Does anyone know a quick and easy way to calibrate a Kossel",
"info (from comments) The gap grows and shrinks in a parabolic manner and",
"makes it impossible to get a good first layer. the printer is a",
"play in one of the links, I tightened the bolt and the play",
"in a parabolic manner and it makes it impossible to get a good",
"loose. Is there a way I could share a video? Upon further inspection",
"a way I could share a video? Upon further inspection I found a",
"3D printer where my nozzle isn't moving flat with my print bed (as",
"isn't moving flat with my print bed (as if the bed is bent)",
"there a way I could share a video? Upon further inspection I found",
"is gone but it didn't fix the problem. I have been playing around",
"get a good first layer. the printer is a FLsun Delta Kossel. The",
"research and it's a calibration issue but I have no idea how to",
"the edge. I did some research and it's a calibration issue but I",
"with a piece of paper and have checked the whole printer to make",
"else could be the problem? ### Addition info (from comments) The gap grows",
"of the links, I tightened the bolt and the play is gone but",
"how to fix it. Does anyone know a quick and easy way to",
"to make sure it's square but the problem continues. What else could be",
"problem with my delta 3D printer where my nozzle isn't moving flat with",
"to be loose. Is there a way I could share a video? Upon",
"bed with a piece of paper and have checked the whole printer to",
"the problem. I have been playing around a bit and I found that",
"used the edge of my steel ruler and it seems to be perfectly",
"bed (as if the bed is bent) but I have used the edge",
"bed is bent) but I have used the edge of my steel ruler",
"is bent) but I have used the edge of my steel ruler and",
"gap grows and shrinks in a parabolic manner and it makes it impossible",
"to fix it. Does anyone know a quick and easy way to calibrate",
"didn't fix the problem. I have been playing around a bit and I",
"of paper and have checked the whole printer to make sure it's square",
"the play is gone but it didn't fix the problem. I have been",
"issue but I have no idea how to fix it. Does anyone know",
"be perfectly flat. I have properly leveled my bed with a piece of",
"properly leveled my bed with a piece of paper and have checked the",
"bolt and the play is gone but it didn't fix the problem. I",
"that the nozzle is closer to the bed in the center than it",
"near the edge. I did some research and it's a calibration issue but",
"I've been having this problem with my delta 3D printer where my nozzle",
"my steel ruler and it seems to be perfectly flat. I have properly",
"a piece of paper and have checked the whole printer to make sure",
"edge. I did some research and it's a calibration issue but I have",
"be loose. Is there a way I could share a video? Upon further",
"if the bed is bent) but I have used the edge of my",
"than it is near the edge. I did some research and it's a",
"the whole printer to make sure it's square but the problem continues. What",
"is near the edge. I did some research and it's a calibration issue",
"the problem continues. What else could be the problem? ### Addition info (from",
"gone but it didn't fix the problem. I have been playing around a",
"(from comments) The gap grows and shrinks in a parabolic manner and it",
"and the play is gone but it didn't fix the problem. I have",
"have checked the whole printer to make sure it's square but the problem",
"idea how to fix it. Does anyone know a quick and easy way",
"to be perfectly flat. I have properly leveled my bed with a piece",
"a bit of play in one of the links, I tightened the bolt",
"fix the problem. I have been playing around a bit and I found",
"with my delta 3D printer where my nozzle isn't moving flat with my",
"of play in one of the links, I tightened the bolt and the",
"no idea how to fix it. Does anyone know a quick and easy",
"the problem? ### Addition info (from comments) The gap grows and shrinks in",
"a video? Upon further inspection I found a bit of play in one",
"closer to the bed in the center than it is near the edge.",
"I have no idea how to fix it. Does anyone know a quick",
"I have been playing around a bit and I found that the nozzle",
"a parabolic manner and it makes it impossible to get a good first",
"layer. the printer is a FLsun Delta Kossel. The links don't appear to",
"links, I tightened the bolt and the play is gone but it didn't",
"bent) but I have used the edge of my steel ruler and it",
"could share a video? Upon further inspection I found a bit of play",
"my nozzle isn't moving flat with my print bed (as if the bed",
"and it seems to be perfectly flat. I have properly leveled my bed",
"Kossel. The links don't appear to be loose. Is there a way I",
"my bed with a piece of paper and have checked the whole printer",
"problem? ### Addition info (from comments) The gap grows and shrinks in a",
"bed in the center than it is near the edge. I did some",
"center than it is near the edge. I did some research and it's",
"it impossible to get a good first layer. the printer is a FLsun",
"is closer to the bed in the center than it is near the",
"found that the nozzle is closer to the bed in the center than",
"I tightened the bolt and the play is gone but it didn't fix",
"it's square but the problem continues. What else could be the problem? ###",
"know a quick and easy way to calibrate a Kossel Delta 3D printer?",
"it didn't fix the problem. I have been playing around a bit and",
"been having this problem with my delta 3D printer where my nozzle isn't",
"calibration issue but I have no idea how to fix it. Does anyone",
"shrinks in a parabolic manner and it makes it impossible to get a",
"piece of paper and have checked the whole printer to make sure it's",
"did some research and it's a calibration issue but I have no idea",
"The gap grows and shrinks in a parabolic manner and it makes it",
"Addition info (from comments) The gap grows and shrinks in a parabolic manner",
"Delta Kossel. The links don't appear to be loose. Is there a way",
"but the problem continues. What else could be the problem? ### Addition info",
"moving flat with my print bed (as if the bed is bent) but",
"printer is a FLsun Delta Kossel. The links don't appear to be loose.",
"further inspection I found a bit of play in one of the links,",
"and it's a calibration issue but I have no idea how to fix",
"continues. What else could be the problem? ### Addition info (from comments) The",
"print bed (as if the bed is bent) but I have used the",
"it is near the edge. I did some research and it's a calibration",
"and shrinks in a parabolic manner and it makes it impossible to get",
"the nozzle is closer to the bed in the center than it is",
"impossible to get a good first layer. the printer is a FLsun Delta",
"one of the links, I tightened the bolt and the play is gone"
] |
[
"settings - Printer](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\")](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\") and [![Machine",
"software like Ultimaker Cura, and this is where I need some help so",
"with the printer and extruder specifications. The following is my best guess. [![Machine",
"miniatures and other fun stuff. However, the instructions do not give the settings",
"[![Machine settings - Extruder1](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\")](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\") I'm",
"can I find settings? Thanks. UPDATE: For those wondering \"what\" settings, I would",
"be 210°C. However, I need help with the other settings. Can someone please",
"I'm basing these settings on the device specs on this page: [Link to",
"\"what\" settings, I would probably start with the printer and extruder specifications. The",
"Cura, and this is where I need some help so that I can",
"Extruder1\") I'm basing these settings on the device specs on this page: [Link",
"put into software like Ultimaker Cura, and this is where I need some",
"other settings. Can someone please point me in the right direction? Is there",
"please point me in the right direction? Is there a better software I",
"want to use to print board game miniatures and other fun stuff. However,",
"basing these settings on the device specs on this page: [Link to Alladinbox",
"that I want to use to print board game miniatures and other fun",
"know it uses PLA and the extrusion temperature should be 210°C. However, I",
"some help so that I can generate the G-code files from models I",
"the other settings. Can someone please point me in the right direction? Is",
"direction? Is there a better software I could be using? Where can I",
"Printer\")](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\") and [![Machine settings - Extruder1](https://i.stack.imgur.com/4BVaF.png \"Machine settings -",
"point me in the right direction? Is there a better software I could",
"this is where I need some help so that I can generate the",
"settings I need to put into software like Ultimaker Cura, and this is",
"software I could be using? Where can I find settings? Thanks. UPDATE: For",
"a better software I could be using? Where can I find settings? Thanks.",
"using? Where can I find settings? Thanks. UPDATE: For those wondering \"what\" settings,",
"help so that I can generate the G-code files from models I download",
"UPDATE: For those wondering \"what\" settings, I would probably start with the printer",
"\"Machine settings - Printer\") and [![Machine settings - Extruder1](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\")](https://i.stack.imgur.com/4BVaF.png",
"Where can I find settings? Thanks. UPDATE: For those wondering \"what\" settings, I",
"fun stuff. However, the instructions do not give the settings I need to",
"like Ultimaker Cura, and this is where I need some help so that",
"- Extruder1](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\")](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\") I'm basing these",
"other fun stuff. However, the instructions do not give the settings I need",
"is my best guess. [![Machine settings - Printer](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\")](https://i.stack.imgur.com/FXKEP.png \"Machine",
"settings - Printer\")](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\") and [![Machine settings - Extruder1](https://i.stack.imgur.com/4BVaF.png \"Machine",
"\"Machine settings - Extruder1\")](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\") I'm basing these settings on",
"board game miniatures and other fun stuff. However, the instructions do not give",
"MyMiniFactory. I know it uses PLA and the extrusion temperature should be 210°C.",
"Alladinbox SkyCube 3D that I want to use to print board game miniatures",
"Extruder1\")](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\") I'm basing these settings on the device specs",
"with the other settings. Can someone please point me in the right direction?",
"right direction? Is there a better software I could be using? Where can",
"these settings on the device specs on this page: [Link to Alladinbox specs](https://www.gearbest.com/3d-printers-3d-printer-kits/pp_969800.html)",
"- Extruder1\") I'm basing these settings on the device specs on this page:",
"need to put into software like Ultimaker Cura, and this is where I",
"and other fun stuff. However, the instructions do not give the settings I",
"and this is where I need some help so that I can generate",
"that I can generate the G-code files from models I download from MyMiniFactory.",
"should be 210°C. However, I need help with the other settings. Can someone",
"the instructions do not give the settings I need to put into software",
"\"Machine settings - Extruder1\") I'm basing these settings on the device specs on",
"someone please point me in the right direction? Is there a better software",
"Thanks. UPDATE: For those wondering \"what\" settings, I would probably start with the",
"use to print board game miniatures and other fun stuff. However, the instructions",
"and extruder specifications. The following is my best guess. [![Machine settings - Printer](https://i.stack.imgur.com/FXKEP.png",
"print board game miniatures and other fun stuff. However, the instructions do not",
"G-code files from models I download from MyMiniFactory. I know it uses PLA",
"- Printer\") and [![Machine settings - Extruder1](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\")](https://i.stack.imgur.com/4BVaF.png \"Machine settings",
"I could be using? Where can I find settings? Thanks. UPDATE: For those",
"uses PLA and the extrusion temperature should be 210°C. However, I need help",
"the G-code files from models I download from MyMiniFactory. I know it uses",
"to put into software like Ultimaker Cura, and this is where I need",
"following is my best guess. [![Machine settings - Printer](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\")](https://i.stack.imgur.com/FXKEP.png",
"I download from MyMiniFactory. I know it uses PLA and the extrusion temperature",
"game miniatures and other fun stuff. However, the instructions do not give the",
"those wondering \"what\" settings, I would probably start with the printer and extruder",
"settings, I would probably start with the printer and extruder specifications. The following",
"extrusion temperature should be 210°C. However, I need help with the other settings.",
"the right direction? Is there a better software I could be using? Where",
"into software like Ultimaker Cura, and this is where I need some help",
"start with the printer and extruder specifications. The following is my best guess.",
"[![Machine settings - Printer](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\")](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\") and",
"I need to put into software like Ultimaker Cura, and this is where",
"- Printer\")](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\") and [![Machine settings - Extruder1](https://i.stack.imgur.com/4BVaF.png \"Machine settings",
"the settings I need to put into software like Ultimaker Cura, and this",
"best guess. [![Machine settings - Printer](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\")](https://i.stack.imgur.com/FXKEP.png \"Machine settings -",
"Ultimaker Cura, and this is where I need some help so that I",
"and the extrusion temperature should be 210°C. However, I need help with the",
"Is there a better software I could be using? Where can I find",
"I need some help so that I can generate the G-code files from",
"need some help so that I can generate the G-code files from models",
"purchased an Alladinbox SkyCube 3D that I want to use to print board",
"settings - Extruder1\") I'm basing these settings on the device specs on this",
"However, I need help with the other settings. Can someone please point me",
"help with the other settings. Can someone please point me in the right",
"I know it uses PLA and the extrusion temperature should be 210°C. However,",
"to use to print board game miniatures and other fun stuff. However, the",
"be using? Where can I find settings? Thanks. UPDATE: For those wondering \"what\"",
"probably start with the printer and extruder specifications. The following is my best",
"it uses PLA and the extrusion temperature should be 210°C. However, I need",
"extruder specifications. The following is my best guess. [![Machine settings - Printer](https://i.stack.imgur.com/FXKEP.png \"Machine",
"Printer\") and [![Machine settings - Extruder1](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\")](https://i.stack.imgur.com/4BVaF.png \"Machine settings -",
"could be using? Where can I find settings? Thanks. UPDATE: For those wondering",
"in the right direction? Is there a better software I could be using?",
"settings - Extruder1](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\")](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\") I'm basing",
"would probably start with the printer and extruder specifications. The following is my",
"\"Machine settings - Printer\")](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\") and [![Machine settings - Extruder1](https://i.stack.imgur.com/4BVaF.png",
"I want to use to print board game miniatures and other fun stuff.",
"better software I could be using? Where can I find settings? Thanks. UPDATE:",
"download from MyMiniFactory. I know it uses PLA and the extrusion temperature should",
"Extruder1](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\")](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\") I'm basing these settings",
"SkyCube 3D that I want to use to print board game miniatures and",
"printer and extruder specifications. The following is my best guess. [![Machine settings -",
"so that I can generate the G-code files from models I download from",
"PLA and the extrusion temperature should be 210°C. However, I need help with",
"Printer](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\")](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\") and [![Machine settings -",
"find settings? Thanks. UPDATE: For those wondering \"what\" settings, I would probably start",
"where I need some help so that I can generate the G-code files",
"models I download from MyMiniFactory. I know it uses PLA and the extrusion",
"my best guess. [![Machine settings - Printer](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\")](https://i.stack.imgur.com/FXKEP.png \"Machine settings",
"give the settings I need to put into software like Ultimaker Cura, and",
"and [![Machine settings - Extruder1](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\")](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\")",
"there a better software I could be using? Where can I find settings?",
"temperature should be 210°C. However, I need help with the other settings. Can",
"files from models I download from MyMiniFactory. I know it uses PLA and",
"210°C. However, I need help with the other settings. Can someone please point",
"guess. [![Machine settings - Printer](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\")](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\")",
"3D that I want to use to print board game miniatures and other",
"I find settings? Thanks. UPDATE: For those wondering \"what\" settings, I would probably",
"- Extruder1\")](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\") I'm basing these settings on the device",
"However, the instructions do not give the settings I need to put into",
"can generate the G-code files from models I download from MyMiniFactory. I know",
"instructions do not give the settings I need to put into software like",
"an Alladinbox SkyCube 3D that I want to use to print board game",
"I can generate the G-code files from models I download from MyMiniFactory. I",
"specifications. The following is my best guess. [![Machine settings - Printer](https://i.stack.imgur.com/FXKEP.png \"Machine settings",
"settings - Printer\") and [![Machine settings - Extruder1](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\")](https://i.stack.imgur.com/4BVaF.png \"Machine",
"from MyMiniFactory. I know it uses PLA and the extrusion temperature should be",
"do not give the settings I need to put into software like Ultimaker",
"The following is my best guess. [![Machine settings - Printer](https://i.stack.imgur.com/FXKEP.png \"Machine settings -",
"to print board game miniatures and other fun stuff. However, the instructions do",
"settings? Thanks. UPDATE: For those wondering \"what\" settings, I would probably start with",
"from models I download from MyMiniFactory. I know it uses PLA and the",
"- Printer](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\")](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\") and [![Machine settings",
"wondering \"what\" settings, I would probably start with the printer and extruder specifications.",
"the extrusion temperature should be 210°C. However, I need help with the other",
"I need help with the other settings. Can someone please point me in",
"need help with the other settings. Can someone please point me in the",
"me in the right direction? Is there a better software I could be",
"the printer and extruder specifications. The following is my best guess. [![Machine settings",
"settings - Extruder1\")](https://i.stack.imgur.com/4BVaF.png \"Machine settings - Extruder1\") I'm basing these settings on the",
"stuff. However, the instructions do not give the settings I need to put",
"is where I need some help so that I can generate the G-code",
"generate the G-code files from models I download from MyMiniFactory. I know it",
"I've just purchased an Alladinbox SkyCube 3D that I want to use to",
"I would probably start with the printer and extruder specifications. The following is",
"settings. Can someone please point me in the right direction? Is there a",
"just purchased an Alladinbox SkyCube 3D that I want to use to print",
"Can someone please point me in the right direction? Is there a better",
"not give the settings I need to put into software like Ultimaker Cura,",
"For those wondering \"what\" settings, I would probably start with the printer and"
] |
[
"later removed easily. Can any one suggest a 3D printing material that can",
"and later removed easily. Can any one suggest a 3D printing material that",
"easily. Can any one suggest a 3D printing material that can be dissolved",
"that I can embed in a resin and later dissolve. I know that",
"and later dissolve. I know that some fancy 3D printing systems have raft",
"3D printing systems have raft materials etc., that can be printed and later",
"I can embed in a resin and later dissolve. I know that some",
"printing systems have raft materials etc., that can be printed and later removed",
"print a structure that I can embed in a resin and later dissolve.",
"that can be printed and later removed easily. Can any one suggest a",
"have raft materials etc., that can be printed and later removed easily. Can",
"systems have raft materials etc., that can be printed and later removed easily.",
"material that can be dissolved in say water or another readily available solvent?",
"to print a structure that I can embed in a resin and later",
"a resin and later dissolve. I know that some fancy 3D printing systems",
"Can any one suggest a 3D printing material that can be dissolved in",
"know that some fancy 3D printing systems have raft materials etc., that can",
"later dissolve. I know that some fancy 3D printing systems have raft materials",
"embed in a resin and later dissolve. I know that some fancy 3D",
"any one suggest a 3D printing material that can be dissolved in say",
"dissolve. I know that some fancy 3D printing systems have raft materials etc.,",
"I know that some fancy 3D printing systems have raft materials etc., that",
"can be printed and later removed easily. Can any one suggest a 3D",
"structure that I can embed in a resin and later dissolve. I know",
"I want to print a structure that I can embed in a resin",
"some fancy 3D printing systems have raft materials etc., that can be printed",
"a structure that I can embed in a resin and later dissolve. I",
"be printed and later removed easily. Can any one suggest a 3D printing",
"suggest a 3D printing material that can be dissolved in say water or",
"raft materials etc., that can be printed and later removed easily. Can any",
"printed and later removed easily. Can any one suggest a 3D printing material",
"3D printing material that can be dissolved in say water or another readily",
"a 3D printing material that can be dissolved in say water or another",
"removed easily. Can any one suggest a 3D printing material that can be",
"want to print a structure that I can embed in a resin and",
"materials etc., that can be printed and later removed easily. Can any one",
"etc., that can be printed and later removed easily. Can any one suggest",
"in a resin and later dissolve. I know that some fancy 3D printing",
"resin and later dissolve. I know that some fancy 3D printing systems have",
"one suggest a 3D printing material that can be dissolved in say water",
"printing material that can be dissolved in say water or another readily available",
"fancy 3D printing systems have raft materials etc., that can be printed and",
"can embed in a resin and later dissolve. I know that some fancy",
"that some fancy 3D printing systems have raft materials etc., that can be"
] |
[
"I converted into an STL and then into gcode using cura and I",
"choose \"print file\" and then select a gcode to print it takes me",
"not the softwares fault and low and behold I was running into the",
"Maker Select 3D Printer v2, and tried to do a print. Now here",
"print it takes me back to the main screen and from there the",
"multiple gcodes just to make sure that it was not the softwares fault",
"SD card and mounted into my Monoprice 3D printer, Maker Select 3D Printer",
"fusion 360 file that I converted into an STL and then into gcode",
"print multiple gcodes just to make sure that it was not the softwares",
"gcode using cura and I got the gcode loaded onto the SD card",
"it just goes back to displaying \"Stepper Disabled.\" And if it is not",
"strange part. When I choose \"print file\" and then select a gcode to",
"Ok so I am trying to print a new fusion 360 file that",
"3D Printer v2, and tried to do a print. Now here is the",
"card and mounted into my Monoprice 3D printer, Maker Select 3D Printer v2,",
"is just a blank screen. I tried to mount and print multiple gcodes",
"the main screen and from there the 3D printers screen displays \"Printing...0%\" for",
"into the same issue. Now before using today all of the gcode was",
"the same issue. Now before using today all of the gcode was printing",
"mounted into my Monoprice 3D printer, Maker Select 3D Printer v2, and tried",
"displaying \"Stepper Disabled.\" And if it is not stepper disabled it is just",
"fault and low and behold I was running into the same issue. Now",
"I am trying to print a new fusion 360 file that I converted",
"and then into gcode using cura and I got the gcode loaded onto",
"Disabled.\" And if it is not stepper disabled it is just a blank",
"Now before using today all of the gcode was printing just fine, however",
"I was running into the same issue. Now before using today all of",
"gcode was printing just fine, however for some reason today it decided to",
"new fusion 360 file that I converted into an STL and then into",
"gcode loaded onto the SD card and mounted into my Monoprice 3D printer,",
"I choose \"print file\" and then select a gcode to print it takes",
"\"print file\" and then select a gcode to print it takes me back",
"the 3D printers screen displays \"Printing...0%\" for a few seconds. After this it",
"STL and then into gcode using cura and I got the gcode loaded",
"this it just goes back to displaying \"Stepper Disabled.\" And if it is",
"a few seconds. After this it just goes back to displaying \"Stepper Disabled.\"",
"file that I converted into an STL and then into gcode using cura",
"a blank screen. I tried to mount and print multiple gcodes just to",
"low and behold I was running into the same issue. Now before using",
"using today all of the gcode was printing just fine, however for some",
"I got the gcode loaded onto the SD card and mounted into my",
"loaded onto the SD card and mounted into my Monoprice 3D printer, Maker",
"select a gcode to print it takes me back to the main screen",
"same issue. Now before using today all of the gcode was printing just",
"3D printers screen displays \"Printing...0%\" for a few seconds. After this it just",
"\"Printing...0%\" for a few seconds. After this it just goes back to displaying",
"blank screen. I tried to mount and print multiple gcodes just to make",
"was printing just fine, however for some reason today it decided to give",
"few seconds. After this it just goes back to displaying \"Stepper Disabled.\" And",
"for a few seconds. After this it just goes back to displaying \"Stepper",
"my Monoprice 3D printer, Maker Select 3D Printer v2, and tried to do",
"into my Monoprice 3D printer, Maker Select 3D Printer v2, and tried to",
"3D printer, Maker Select 3D Printer v2, and tried to do a print.",
"just fine, however for some reason today it decided to give me this",
"do a print. Now here is the strange part. When I choose \"print",
"And if it is not stepper disabled it is just a blank screen.",
"using cura and I got the gcode loaded onto the SD card and",
"was running into the same issue. Now before using today all of the",
"cura and I got the gcode loaded onto the SD card and mounted",
"am trying to print a new fusion 360 file that I converted into",
"into an STL and then into gcode using cura and I got the",
"converted into an STL and then into gcode using cura and I got",
"stepper disabled it is just a blank screen. I tried to mount and",
"to displaying \"Stepper Disabled.\" And if it is not stepper disabled it is",
"issue. Now before using today all of the gcode was printing just fine,",
"fine, however for some reason today it decided to give me this issue.",
"screen displays \"Printing...0%\" for a few seconds. After this it just goes back",
"softwares fault and low and behold I was running into the same issue.",
"goes back to displaying \"Stepper Disabled.\" And if it is not stepper disabled",
"an STL and then into gcode using cura and I got the gcode",
"that it was not the softwares fault and low and behold I was",
"so I am trying to print a new fusion 360 file that I",
"to make sure that it was not the softwares fault and low and",
"just to make sure that it was not the softwares fault and low",
"Monoprice 3D printer, Maker Select 3D Printer v2, and tried to do a",
"the strange part. When I choose \"print file\" and then select a gcode",
"a gcode to print it takes me back to the main screen and",
"Printer v2, and tried to do a print. Now here is the strange",
"screen and from there the 3D printers screen displays \"Printing...0%\" for a few",
"part. When I choose \"print file\" and then select a gcode to print",
"disabled it is just a blank screen. I tried to mount and print",
"main screen and from there the 3D printers screen displays \"Printing...0%\" for a",
"360 file that I converted into an STL and then into gcode using",
"and print multiple gcodes just to make sure that it was not the",
"the SD card and mounted into my Monoprice 3D printer, Maker Select 3D",
"and I got the gcode loaded onto the SD card and mounted into",
"When I choose \"print file\" and then select a gcode to print it",
"After this it just goes back to displaying \"Stepper Disabled.\" And if it",
"the softwares fault and low and behold I was running into the same",
"and from there the 3D printers screen displays \"Printing...0%\" for a few seconds.",
"got the gcode loaded onto the SD card and mounted into my Monoprice",
"print. Now here is the strange part. When I choose \"print file\" and",
"me back to the main screen and from there the 3D printers screen",
"make sure that it was not the softwares fault and low and behold",
"v2, and tried to do a print. Now here is the strange part.",
"it is not stepper disabled it is just a blank screen. I tried",
"I tried to mount and print multiple gcodes just to make sure that",
"from there the 3D printers screen displays \"Printing...0%\" for a few seconds. After",
"displays \"Printing...0%\" for a few seconds. After this it just goes back to",
"print a new fusion 360 file that I converted into an STL and",
"not stepper disabled it is just a blank screen. I tried to mount",
"and low and behold I was running into the same issue. Now before",
"printer, Maker Select 3D Printer v2, and tried to do a print. Now",
"of the gcode was printing just fine, however for some reason today it",
"here is the strange part. When I choose \"print file\" and then select",
"is not stepper disabled it is just a blank screen. I tried to",
"to print a new fusion 360 file that I converted into an STL",
"tried to mount and print multiple gcodes just to make sure that it",
"that I converted into an STL and then into gcode using cura and",
"screen. I tried to mount and print multiple gcodes just to make sure",
"\"Stepper Disabled.\" And if it is not stepper disabled it is just a",
"to do a print. Now here is the strange part. When I choose",
"then into gcode using cura and I got the gcode loaded onto the",
"gcodes just to make sure that it was not the softwares fault and",
"a new fusion 360 file that I converted into an STL and then",
"running into the same issue. Now before using today all of the gcode",
"printing just fine, however for some reason today it decided to give me",
"and tried to do a print. Now here is the strange part. When",
"the gcode was printing just fine, however for some reason today it decided",
"Select 3D Printer v2, and tried to do a print. Now here is",
"to mount and print multiple gcodes just to make sure that it was",
"today all of the gcode was printing just fine, however for some reason",
"there the 3D printers screen displays \"Printing...0%\" for a few seconds. After this",
"all of the gcode was printing just fine, however for some reason today",
"if it is not stepper disabled it is just a blank screen. I",
"back to the main screen and from there the 3D printers screen displays",
"tried to do a print. Now here is the strange part. When I",
"takes me back to the main screen and from there the 3D printers",
"seconds. After this it just goes back to displaying \"Stepper Disabled.\" And if",
"back to displaying \"Stepper Disabled.\" And if it is not stepper disabled it",
"it is just a blank screen. I tried to mount and print multiple",
"mount and print multiple gcodes just to make sure that it was not",
"then select a gcode to print it takes me back to the main",
"was not the softwares fault and low and behold I was running into",
"before using today all of the gcode was printing just fine, however for",
"gcode to print it takes me back to the main screen and from",
"printers screen displays \"Printing...0%\" for a few seconds. After this it just goes",
"just goes back to displaying \"Stepper Disabled.\" And if it is not stepper",
"file\" and then select a gcode to print it takes me back to",
"and behold I was running into the same issue. Now before using today",
"the gcode loaded onto the SD card and mounted into my Monoprice 3D",
"and then select a gcode to print it takes me back to the",
"Now here is the strange part. When I choose \"print file\" and then",
"trying to print a new fusion 360 file that I converted into an",
"behold I was running into the same issue. Now before using today all",
"into gcode using cura and I got the gcode loaded onto the SD",
"it takes me back to the main screen and from there the 3D",
"and mounted into my Monoprice 3D printer, Maker Select 3D Printer v2, and",
"it was not the softwares fault and low and behold I was running",
"onto the SD card and mounted into my Monoprice 3D printer, Maker Select",
"a print. Now here is the strange part. When I choose \"print file\"",
"is the strange part. When I choose \"print file\" and then select a",
"just a blank screen. I tried to mount and print multiple gcodes just",
"sure that it was not the softwares fault and low and behold I",
"to the main screen and from there the 3D printers screen displays \"Printing...0%\"",
"to print it takes me back to the main screen and from there"
] |
[
"same time. Now I can use one at a time but not both",
"can use one at a time but not both at the same time.",
"Now I can use one at a time but not both at the",
"I am using 2 extruders. Is it possible to use them both at",
"not both at the same time. Is there a gcode that supports this",
"at the same time. Now I can use one at a time but",
"time. Now I can use one at a time but not both at",
"both at the same time. Now I can use one at a time",
"2 extruders. Is it possible to use them both at the same time.",
"them both at the same time. Now I can use one at a",
"extruders. Is it possible to use them both at the same time. Now",
"use one at a time but not both at the same time. Is",
"one at a time but not both at the same time. Is there",
"both at the same time. Is there a gcode that supports this action?",
"Is it possible to use them both at the same time. Now I",
"to use them both at the same time. Now I can use one",
"use them both at the same time. Now I can use one at",
"but not both at the same time. Is there a gcode that supports",
"I can use one at a time but not both at the same",
"at a time but not both at the same time. Is there a",
"using 2 extruders. Is it possible to use them both at the same",
"possible to use them both at the same time. Now I can use",
"it possible to use them both at the same time. Now I can",
"the same time. Now I can use one at a time but not",
"a time but not both at the same time. Is there a gcode",
"time but not both at the same time. Is there a gcode that",
"am using 2 extruders. Is it possible to use them both at the"
] |
[
"recently saw [this](https://www.youtube.com/watch?v=TpvNEZCvk84) video of super-swellable polymer and felt inspired. Printing a swellable",
"a printable material. Does anyone know of a material that is? Preferably, swelling",
"super-swellable polymer and felt inspired. Printing a swellable structure would be sort of",
"polymer and felt inspired. Printing a swellable structure would be sort of interesting.",
"interesting. However, sodium polyacrylate isn't a printable material. Does anyone know of a",
"[this](https://www.youtube.com/watch?v=TpvNEZCvk84) video of super-swellable polymer and felt inspired. Printing a swellable structure would",
"printable material. Does anyone know of a material that is? Preferably, swelling activated",
"of super-swellable polymer and felt inspired. Printing a swellable structure would be sort",
"I recently saw [this](https://www.youtube.com/watch?v=TpvNEZCvk84) video of super-swellable polymer and felt inspired. Printing a",
"video of super-swellable polymer and felt inspired. Printing a swellable structure would be",
"would be sort of interesting. However, sodium polyacrylate isn't a printable material. Does",
"structure would be sort of interesting. However, sodium polyacrylate isn't a printable material.",
"saw [this](https://www.youtube.com/watch?v=TpvNEZCvk84) video of super-swellable polymer and felt inspired. Printing a swellable structure",
"isn't a printable material. Does anyone know of a material that is? Preferably,",
"Printing a swellable structure would be sort of interesting. However, sodium polyacrylate isn't",
"and felt inspired. Printing a swellable structure would be sort of interesting. However,",
"material. Does anyone know of a material that is? Preferably, swelling activated by",
"inspired. Printing a swellable structure would be sort of interesting. However, sodium polyacrylate",
"swellable structure would be sort of interesting. However, sodium polyacrylate isn't a printable",
"Does anyone know of a material that is? Preferably, swelling activated by water.",
"felt inspired. Printing a swellable structure would be sort of interesting. However, sodium",
"However, sodium polyacrylate isn't a printable material. Does anyone know of a material",
"polyacrylate isn't a printable material. Does anyone know of a material that is?",
"sodium polyacrylate isn't a printable material. Does anyone know of a material that",
"of interesting. However, sodium polyacrylate isn't a printable material. Does anyone know of",
"be sort of interesting. However, sodium polyacrylate isn't a printable material. Does anyone",
"sort of interesting. However, sodium polyacrylate isn't a printable material. Does anyone know",
"a swellable structure would be sort of interesting. However, sodium polyacrylate isn't a"
] |
[
"started to function somehow: As the sensor doesn't sense the surface (or the",
"heat bed), as it didn't work at all I had to put it",
"which isn't either flat nor stable according to temperature, I added aluminium tape",
"especially when they were big (as they didn't stick well, they corners warped",
"which makes it work, very very well! All well for flex printing! Switched",
"the middle is after ripping of the \"hook\" from this hanger when I",
"the last part that I broke (the square impact in the middle is",
"it didn't work at all I had to put it in the freezer",
"straight into the Bowden tube (classic modification). This worked okay for small parts",
"glass, so I bought another inductive sensor (old was 4 mm LJ12A3-4-Z/BY PNP",
"small errors in print height, and not too wide items) and I have",
"ripping of the \"hook\" from this hanger when I tried to detach it",
"distance really well, but still the flex filament floats around on the glass",
"well! All well for flex printing! Switched to PLA (which always worked okay",
"serious hassle; 3. It's also a time waster. **My question is:** How can",
"whatever some small errors in print height, and not too wide items) and",
"as it didn't work at all I had to put it in the",
"alleviate this I added a borosilicate glass on top of the heat bed",
"glass on top of the heat bed for perfect 'flatness', but the inductive",
"(the tape was removed everywhere except where the item was stuck. Plus now",
"of the last part that I broke (the square impact in the middle",
"from this hanger when I tried to detach it from the heat bed),",
"(Scratch XYCore-Bowden) to have the ability to use flexible filament so first I",
"hour. It helps a lot but: 1. Still not easy to remove without",
"temperature, I added aluminium tape under the glass pane. This actually works perfectly",
"warped -> all kind of problems). I also wanted to upgrade my printer",
"my extruder motor/cog-wheel so it pushes the filament straight into the Bowden tube",
"It helps a lot but: 1. Still not easy to remove without making",
"get broken, etc.,... I have tried: * Pincers (works for some items, doesn't",
"out. To alleviate this I added a borosilicate glass on top of the",
"use flexible filament so first I modified my extruder motor/cog-wheel so it pushes",
"be able to remove the rest: [![Print damaged during removal](https://i.stack.imgur.com/BbbjJ.jpg \"Print damaged during",
"to the bed in a manner **I just cant get them off...** They",
"print and remove your item without breaking it? Little image of the last",
"lot but: 1. Still not easy to remove without making marks; 2. It's",
"to be able to remove the rest: [![Print damaged during removal](https://i.stack.imgur.com/BbbjJ.jpg \"Print damaged",
"not easy to remove without making marks; 2. It's a serious hassle; 3.",
"How can you both reliably print and remove your item without breaking it?",
"your item without breaking it? Little image of the last part that I",
"the flex filament floats around on the glass so I added blue painters",
"to remove the rest: [![Print damaged during removal](https://i.stack.imgur.com/BbbjJ.jpg \"Print damaged during removal\")](https://i.stack.imgur.com/BbbjJ.jpg \"Print",
"the ability to use flexible filament so first I modified my extruder motor/cog-wheel",
"height, and not too wide items) and I have all pieces sticking to",
"they corners warped -> all kind of problems). I also wanted to upgrade",
"well, they corners warped -> all kind of problems). I also wanted to",
"some small errors in print height, and not too wide items) and I",
"It's a serious hassle; 3. It's also a time waster. **My question is:**",
"I added blue painters tape which makes it work, very very well! All",
"have to add new tape); * Cwukk the build plate in the freezer",
"mm LJ12A3-4-Z/BY PNP with a voltage divider, new is 8 mm NPN) and",
"3 mm of the glass, so I bought another inductive sensor (old was",
"cant get them off...** They get big scratches from the pincers, get broken,",
"in the freezer for an hour or so to be able to remove",
"I also wanted to upgrade my printer (Scratch XYCore-Bowden) to have the ability",
"to have the ability to use flexible filament so first I modified my",
"ability to use flexible filament so first I modified my extruder motor/cog-wheel so",
"To alleviate this I added a borosilicate glass on top of the heat",
"first layer distance really well, but still the flex filament floats around on",
"pincers, get broken, etc.,... I have tried: * Pincers (works for some items,",
"question is:** How can you both reliably print and remove your item without",
"the build plate, especially when they were big (as they didn't stick well,",
"of the heat bed for perfect 'flatness', but the inductive sensor didn't reach",
"everywhere except where the item was stuck. Plus now I have to add",
"able to tune in the first layer distance really well, but still the",
"tube (classic modification). This worked okay for small parts (as was the case",
"that I broke (the square impact in the middle is after ripping of",
"blue painter tape (the tape was removed everywhere except where the item was",
"I am able to tune in the first layer distance really well, but",
"flat which means the Marlin 3-point test doesn't work out. To alleviate this",
"didn't reach through those extra 3 mm of the glass, so I bought",
"NPN) and this started to function somehow: As the sensor doesn't sense the",
"in the first layer distance really well, but still the flex filament floats",
"item without breaking it? Little image of the last part that I broke",
"the glass, so I bought another inductive sensor (old was 4 mm LJ12A3-4-Z/BY",
"(as they didn't stick well, they corners warped -> all kind of problems).",
"doesn't work out. To alleviate this I added a borosilicate glass on top",
"were big (as they didn't stick well, they corners warped -> all kind",
"I had to put it in the freezer for an hour or so",
"(the square impact in the middle is after ripping of the \"hook\" from",
"means the Marlin 3-point test doesn't work out. To alleviate this I added",
"also a time waster. **My question is:** How can you both reliably print",
"too wide items) and I have all pieces sticking to the bed in",
"in the middle is after ripping of the \"hook\" from this hanger when",
"remove without making marks; 2. It's a serious hassle; 3. It's also a",
"without breaking it? Little image of the last part that I broke (the",
"you both reliably print and remove your item without breaking it? Little image",
"pane. This actually works perfectly well! Now I am able to tune in",
"rest: [![Print damaged during removal](https://i.stack.imgur.com/BbbjJ.jpg \"Print damaged during removal\")](https://i.stack.imgur.com/BbbjJ.jpg \"Print damaged during removal\")",
"3-point test doesn't work out. To alleviate this I added a borosilicate glass",
"so to be able to remove the rest: [![Print damaged during removal](https://i.stack.imgur.com/BbbjJ.jpg \"Print",
"so I bought another inductive sensor (old was 4 mm LJ12A3-4-Z/BY PNP with",
"the build plate in the freezer for an hour. It helps a lot",
"sense the surface (or the glass at all), but senses the heatbed under,",
"case with PLA). The heat-bed seems to flex when heating in an uniform",
"actually works perfectly well! Now I am able to tune in the first",
"added blue painters tape which makes it work, very very well! All well",
"the surface (or the glass at all), but senses the heatbed under, which",
"through those extra 3 mm of the glass, so I bought another inductive",
"Ripping off the blue painter tape (the tape was removed everywhere except where",
"motor/cog-wheel so it pushes the filament straight into the Bowden tube (classic modification).",
"painters tape which makes it work, very very well! All well for flex",
"detach it from the heat bed), as it didn't work at all I",
"had to put it in the freezer for an hour or so to",
"and I have all pieces sticking to the bed in a manner **I",
"marks); * Ripping off the blue painter tape (the tape was removed everywhere",
"makes marks); * Ripping off the blue painter tape (the tape was removed",
"glass pane. This actually works perfectly well! Now I am able to tune",
"**My question is:** How can you both reliably print and remove your item",
"new is 8 mm NPN) and this started to function somehow: As the",
"problems with items sticking on the build plate, especially when they were big",
"reach through those extra 3 mm of the glass, so I bought another",
"the heatbed under, which isn't either flat nor stable according to temperature, I",
"makes it work, very very well! All well for flex printing! Switched to",
"This actually works perfectly well! Now I am able to tune in the",
"a lot but: 1. Still not easy to remove without making marks; 2.",
"broke (the square impact in the middle is after ripping of the \"hook\"",
"glass at all), but senses the heatbed under, which isn't either flat nor",
"it from the heat bed), as it didn't work at all I had",
"all), but senses the heatbed under, which isn't either flat nor stable according",
"**I just cant get them off...** They get big scratches from the pincers,",
"big scratches from the pincers, get broken, etc.,... I have tried: * Pincers",
"inductive sensor (old was 4 mm LJ12A3-4-Z/BY PNP with a voltage divider, new",
"seems to flex when heating in an uniform manner so it's not perfectly",
"tried to detach it from the heat bed), as it didn't work at",
"items sticking on the build plate, especially when they were big (as they",
"The heat-bed seems to flex when heating in an uniform manner so it's",
"with a voltage divider, new is 8 mm NPN) and this started to",
"(which always worked okay whatever some small errors in print height, and not",
"layer distance really well, but still the flex filament floats around on the",
"I have all pieces sticking to the bed in a manner **I just",
"items) and I have all pieces sticking to the bed in a manner",
"to add new tape); * Cwukk the build plate in the freezer for",
"senses the heatbed under, which isn't either flat nor stable according to temperature,",
"I tried to detach it from the heat bed), as it didn't work",
"work out. To alleviate this I added a borosilicate glass on top of",
"a borosilicate glass on top of the heat bed for perfect 'flatness', but",
"making marks; 2. It's a serious hassle; 3. It's also a time waster.",
"Now I am able to tune in the first layer distance really well,",
"print height, and not too wide items) and I have all pieces sticking",
"for an hour or so to be able to remove the rest: [![Print",
"have tried: * Pincers (works for some items, doesn't work for some. About",
"isn't either flat nor stable according to temperature, I added aluminium tape under",
"helps a lot but: 1. Still not easy to remove without making marks;",
"well! Now I am able to tune in the first layer distance really",
"remove your item without breaking it? Little image of the last part that",
"a serious hassle; 3. It's also a time waster. **My question is:** How",
"breaking it? Little image of the last part that I broke (the square",
"build plate in the freezer for an hour. It helps a lot but:",
"all kind of problems). I also wanted to upgrade my printer (Scratch XYCore-Bowden)",
"and remove your item without breaking it? Little image of the last part",
"test doesn't work out. To alleviate this I added a borosilicate glass on",
"uniform manner so it's not perfectly flat which means the Marlin 3-point test",
"borosilicate glass on top of the heat bed for perfect 'flatness', but the",
"is after ripping of the \"hook\" from this hanger when I tried to",
"they didn't stick well, they corners warped -> all kind of problems). I",
"the Marlin 3-point test doesn't work out. To alleviate this I added a",
"I have had problems with items sticking on the build plate, especially when",
"was stuck. Plus now I have to add new tape); * Cwukk the",
"them off...** They get big scratches from the pincers, get broken, etc.,... I",
"it? Little image of the last part that I broke (the square impact",
"work at all I had to put it in the freezer for an",
"(old was 4 mm LJ12A3-4-Z/BY PNP with a voltage divider, new is 8",
"inductive sensor didn't reach through those extra 3 mm of the glass, so",
"4 mm LJ12A3-4-Z/BY PNP with a voltage divider, new is 8 mm NPN)",
"this I added a borosilicate glass on top of the heat bed for",
"divider, new is 8 mm NPN) and this started to function somehow: As",
"easy to remove without making marks; 2. It's a serious hassle; 3. It's",
"hassle; 3. It's also a time waster. **My question is:** How can you",
"As the sensor doesn't sense the surface (or the glass at all), but",
"the bed in a manner **I just cant get them off...** They get",
"I modified my extruder motor/cog-wheel so it pushes the filament straight into the",
"this hanger when I tried to detach it from the heat bed), as",
"well for flex printing! Switched to PLA (which always worked okay whatever some",
"extruder motor/cog-wheel so it pushes the filament straight into the Bowden tube (classic",
"Switched to PLA (which always worked okay whatever some small errors in print",
"am able to tune in the first layer distance really well, but still",
"big (as they didn't stick well, they corners warped -> all kind of",
"so it pushes the filament straight into the Bowden tube (classic modification). This",
"time waster. **My question is:** How can you both reliably print and remove",
"according to temperature, I added aluminium tape under the glass pane. This actually",
"on the build plate, especially when they were big (as they didn't stick",
"under, which isn't either flat nor stable according to temperature, I added aluminium",
"Marlin 3-point test doesn't work out. To alleviate this I added a borosilicate",
"PNP with a voltage divider, new is 8 mm NPN) and this started",
"tape under the glass pane. This actually works perfectly well! Now I am",
"or so to be able to remove the rest: [![Print damaged during removal](https://i.stack.imgur.com/BbbjJ.jpg",
"off the blue painter tape (the tape was removed everywhere except where the",
"not too wide items) and I have all pieces sticking to the bed",
"some items, doesn't work for some. About always makes marks); * Ripping off",
"item was stuck. Plus now I have to add new tape); * Cwukk",
"for some. About always makes marks); * Ripping off the blue painter tape",
"sensor doesn't sense the surface (or the glass at all), but senses the",
"the blue painter tape (the tape was removed everywhere except where the item",
"where the item was stuck. Plus now I have to add new tape);",
"for flex printing! Switched to PLA (which always worked okay whatever some small",
"the heat bed for perfect 'flatness', but the inductive sensor didn't reach through",
"flex printing! Switched to PLA (which always worked okay whatever some small errors",
"errors in print height, and not too wide items) and I have all",
"heat bed for perfect 'flatness', but the inductive sensor didn't reach through those",
"those extra 3 mm of the glass, so I bought another inductive sensor",
"when heating in an uniform manner so it's not perfectly flat which means",
"work, very very well! All well for flex printing! Switched to PLA (which",
"to remove without making marks; 2. It's a serious hassle; 3. It's also",
"works perfectly well! Now I am able to tune in the first layer",
"tape which makes it work, very very well! All well for flex printing!",
"still the flex filament floats around on the glass so I added blue",
"broken, etc.,... I have tried: * Pincers (works for some items, doesn't work",
"from the pincers, get broken, etc.,... I have tried: * Pincers (works for",
"so first I modified my extruder motor/cog-wheel so it pushes the filament straight",
"* Ripping off the blue painter tape (the tape was removed everywhere except",
"scratches from the pincers, get broken, etc.,... I have tried: * Pincers (works",
"under the glass pane. This actually works perfectly well! Now I am able",
"well, but still the flex filament floats around on the glass so I",
"have the ability to use flexible filament so first I modified my extruder",
"and this started to function somehow: As the sensor doesn't sense the surface",
"but still the flex filament floats around on the glass so I added",
"LJ12A3-4-Z/BY PNP with a voltage divider, new is 8 mm NPN) and this",
"they were big (as they didn't stick well, they corners warped -> all",
"I broke (the square impact in the middle is after ripping of the",
"some. About always makes marks); * Ripping off the blue painter tape (the",
"was removed everywhere except where the item was stuck. Plus now I have",
"but: 1. Still not easy to remove without making marks; 2. It's a",
"Little image of the last part that I broke (the square impact in",
"I have tried: * Pincers (works for some items, doesn't work for some.",
"okay whatever some small errors in print height, and not too wide items)",
"3. It's also a time waster. **My question is:** How can you both",
"manner **I just cant get them off...** They get big scratches from the",
"all I had to put it in the freezer for an hour or",
"surface (or the glass at all), but senses the heatbed under, which isn't",
"painter tape (the tape was removed everywhere except where the item was stuck.",
"to tune in the first layer distance really well, but still the flex",
"work for some. About always makes marks); * Ripping off the blue painter",
"it pushes the filament straight into the Bowden tube (classic modification). This worked",
"* Cwukk the build plate in the freezer for an hour. It helps",
"of the \"hook\" from this hanger when I tried to detach it from",
"* Pincers (works for some items, doesn't work for some. About always makes",
"the Bowden tube (classic modification). This worked okay for small parts (as was",
"tune in the first layer distance really well, but still the flex filament",
"both reliably print and remove your item without breaking it? Little image of",
"with items sticking on the build plate, especially when they were big (as",
"didn't stick well, they corners warped -> all kind of problems). I also",
"flex when heating in an uniform manner so it's not perfectly flat which",
"\"hook\" from this hanger when I tried to detach it from the heat",
"sensor (old was 4 mm LJ12A3-4-Z/BY PNP with a voltage divider, new is",
"the freezer for an hour or so to be able to remove the",
"XYCore-Bowden) to have the ability to use flexible filament so first I modified",
"for small parts (as was the case with PLA). The heat-bed seems to",
"not perfectly flat which means the Marlin 3-point test doesn't work out. To",
"get big scratches from the pincers, get broken, etc.,... I have tried: *",
"it's not perfectly flat which means the Marlin 3-point test doesn't work out.",
"in the freezer for an hour. It helps a lot but: 1. Still",
"was 4 mm LJ12A3-4-Z/BY PNP with a voltage divider, new is 8 mm",
"now I have to add new tape); * Cwukk the build plate in",
"Plus now I have to add new tape); * Cwukk the build plate",
"flex filament floats around on the glass so I added blue painters tape",
"after ripping of the \"hook\" from this hanger when I tried to detach",
"stick well, they corners warped -> all kind of problems). I also wanted",
"corners warped -> all kind of problems). I also wanted to upgrade my",
"manner so it's not perfectly flat which means the Marlin 3-point test doesn't",
"items, doesn't work for some. About always makes marks); * Ripping off the",
"and not too wide items) and I have all pieces sticking to the",
"heating in an uniform manner so it's not perfectly flat which means the",
"tape (the tape was removed everywhere except where the item was stuck. Plus",
"can you both reliably print and remove your item without breaking it? Little",
"extra 3 mm of the glass, so I bought another inductive sensor (old",
"to use flexible filament so first I modified my extruder motor/cog-wheel so it",
"okay for small parts (as was the case with PLA). The heat-bed seems",
"didn't work at all I had to put it in the freezer for",
"with PLA). The heat-bed seems to flex when heating in an uniform manner",
"impact in the middle is after ripping of the \"hook\" from this hanger",
"pieces sticking to the bed in a manner **I just cant get them",
"added aluminium tape under the glass pane. This actually works perfectly well! Now",
"tape); * Cwukk the build plate in the freezer for an hour. It",
"was the case with PLA). The heat-bed seems to flex when heating in",
"stuck. Plus now I have to add new tape); * Cwukk the build",
"this started to function somehow: As the sensor doesn't sense the surface (or",
"I have to add new tape); * Cwukk the build plate in the",
"an hour or so to be able to remove the rest: [![Print damaged",
"at all), but senses the heatbed under, which isn't either flat nor stable",
"I added a borosilicate glass on top of the heat bed for perfect",
"the rest: [![Print damaged during removal](https://i.stack.imgur.com/BbbjJ.jpg \"Print damaged during removal\")](https://i.stack.imgur.com/BbbjJ.jpg \"Print damaged during",
"first I modified my extruder motor/cog-wheel so it pushes the filament straight into",
"have had problems with items sticking on the build plate, especially when they",
"all pieces sticking to the bed in a manner **I just cant get",
"heatbed under, which isn't either flat nor stable according to temperature, I added",
"About always makes marks); * Ripping off the blue painter tape (the tape",
"to flex when heating in an uniform manner so it's not perfectly flat",
"plate in the freezer for an hour. It helps a lot but: 1.",
"voltage divider, new is 8 mm NPN) and this started to function somehow:",
"somehow: As the sensor doesn't sense the surface (or the glass at all),",
"filament so first I modified my extruder motor/cog-wheel so it pushes the filament",
"stable according to temperature, I added aluminium tape under the glass pane. This",
"is:** How can you both reliably print and remove your item without breaking",
"All well for flex printing! Switched to PLA (which always worked okay whatever",
"tape was removed everywhere except where the item was stuck. Plus now I",
"mm of the glass, so I bought another inductive sensor (old was 4",
"but senses the heatbed under, which isn't either flat nor stable according to",
"the \"hook\" from this hanger when I tried to detach it from the",
"the heat bed), as it didn't work at all I had to put",
"modification). This worked okay for small parts (as was the case with PLA).",
"added a borosilicate glass on top of the heat bed for perfect 'flatness',",
"either flat nor stable according to temperature, I added aluminium tape under the",
"remove the rest: [![Print damaged during removal](https://i.stack.imgur.com/BbbjJ.jpg \"Print damaged during removal\")](https://i.stack.imgur.com/BbbjJ.jpg \"Print damaged",
"bed for perfect 'flatness', but the inductive sensor didn't reach through those extra",
"(works for some items, doesn't work for some. About always makes marks); *",
"for perfect 'flatness', but the inductive sensor didn't reach through those extra 3",
"perfectly flat which means the Marlin 3-point test doesn't work out. To alleviate",
"also wanted to upgrade my printer (Scratch XYCore-Bowden) to have the ability to",
"glass so I added blue painters tape which makes it work, very very",
"but the inductive sensor didn't reach through those extra 3 mm of the",
"the filament straight into the Bowden tube (classic modification). This worked okay for",
"bed in a manner **I just cant get them off...** They get big",
"Still not easy to remove without making marks; 2. It's a serious hassle;",
"is 8 mm NPN) and this started to function somehow: As the sensor",
"the item was stuck. Plus now I have to add new tape); *",
"had problems with items sticking on the build plate, especially when they were",
"in a manner **I just cant get them off...** They get big scratches",
"the sensor doesn't sense the surface (or the glass at all), but senses",
"(or the glass at all), but senses the heatbed under, which isn't either",
"on the glass so I added blue painters tape which makes it work,",
"removed everywhere except where the item was stuck. Plus now I have to",
"from the heat bed), as it didn't work at all I had to",
"8 mm NPN) and this started to function somehow: As the sensor doesn't",
"plate, especially when they were big (as they didn't stick well, they corners",
"worked okay for small parts (as was the case with PLA). The heat-bed",
"nor stable according to temperature, I added aluminium tape under the glass pane.",
"(as was the case with PLA). The heat-bed seems to flex when heating",
"new tape); * Cwukk the build plate in the freezer for an hour.",
"to PLA (which always worked okay whatever some small errors in print height,",
"for an hour. It helps a lot but: 1. Still not easy to",
"'flatness', but the inductive sensor didn't reach through those extra 3 mm of",
"without making marks; 2. It's a serious hassle; 3. It's also a time",
"Pincers (works for some items, doesn't work for some. About always makes marks);",
"small parts (as was the case with PLA). The heat-bed seems to flex",
"hanger when I tried to detach it from the heat bed), as it",
"of problems). I also wanted to upgrade my printer (Scratch XYCore-Bowden) to have",
"etc.,... I have tried: * Pincers (works for some items, doesn't work for",
"square impact in the middle is after ripping of the \"hook\" from this",
"able to remove the rest: [![Print damaged during removal](https://i.stack.imgur.com/BbbjJ.jpg \"Print damaged during removal\")](https://i.stack.imgur.com/BbbjJ.jpg",
"it work, very very well! All well for flex printing! Switched to PLA",
"so it's not perfectly flat which means the Marlin 3-point test doesn't work",
"blue painters tape which makes it work, very very well! All well for",
"at all I had to put it in the freezer for an hour",
"problems). I also wanted to upgrade my printer (Scratch XYCore-Bowden) to have the",
"waster. **My question is:** How can you both reliably print and remove your",
"last part that I broke (the square impact in the middle is after",
"I bought another inductive sensor (old was 4 mm LJ12A3-4-Z/BY PNP with a",
"kind of problems). I also wanted to upgrade my printer (Scratch XYCore-Bowden) to",
"bought another inductive sensor (old was 4 mm LJ12A3-4-Z/BY PNP with a voltage",
"of the glass, so I bought another inductive sensor (old was 4 mm",
"on top of the heat bed for perfect 'flatness', but the inductive sensor",
"aluminium tape under the glass pane. This actually works perfectly well! Now I",
"the first layer distance really well, but still the flex filament floats around",
"a manner **I just cant get them off...** They get big scratches from",
"very very well! All well for flex printing! Switched to PLA (which always",
"pushes the filament straight into the Bowden tube (classic modification). This worked okay",
"build plate, especially when they were big (as they didn't stick well, they",
"to function somehow: As the sensor doesn't sense the surface (or the glass",
"parts (as was the case with PLA). The heat-bed seems to flex when",
"flat nor stable according to temperature, I added aluminium tape under the glass",
"top of the heat bed for perfect 'flatness', but the inductive sensor didn't",
"to temperature, I added aluminium tape under the glass pane. This actually works",
"worked okay whatever some small errors in print height, and not too wide",
"-> all kind of problems). I also wanted to upgrade my printer (Scratch",
"my printer (Scratch XYCore-Bowden) to have the ability to use flexible filament so",
"2. It's a serious hassle; 3. It's also a time waster. **My question",
"modified my extruder motor/cog-wheel so it pushes the filament straight into the Bowden",
"into the Bowden tube (classic modification). This worked okay for small parts (as",
"reliably print and remove your item without breaking it? Little image of the",
"1. Still not easy to remove without making marks; 2. It's a serious",
"always worked okay whatever some small errors in print height, and not too",
"hour or so to be able to remove the rest: [![Print damaged during",
"doesn't work for some. About always makes marks); * Ripping off the blue",
"the case with PLA). The heat-bed seems to flex when heating in an",
"the glass at all), but senses the heatbed under, which isn't either flat",
"really well, but still the flex filament floats around on the glass so",
"it in the freezer for an hour or so to be able to",
"printer (Scratch XYCore-Bowden) to have the ability to use flexible filament so first",
"(classic modification). This worked okay for small parts (as was the case with",
"the glass pane. This actually works perfectly well! Now I am able to",
"filament straight into the Bowden tube (classic modification). This worked okay for small",
"just cant get them off...** They get big scratches from the pincers, get",
"which means the Marlin 3-point test doesn't work out. To alleviate this I",
"in print height, and not too wide items) and I have all pieces",
"so I added blue painters tape which makes it work, very very well!",
"PLA (which always worked okay whatever some small errors in print height, and",
"wanted to upgrade my printer (Scratch XYCore-Bowden) to have the ability to use",
"I added aluminium tape under the glass pane. This actually works perfectly well!",
"Cwukk the build plate in the freezer for an hour. It helps a",
"filament floats around on the glass so I added blue painters tape which",
"perfect 'flatness', but the inductive sensor didn't reach through those extra 3 mm",
"add new tape); * Cwukk the build plate in the freezer for an",
"the inductive sensor didn't reach through those extra 3 mm of the glass,",
"to put it in the freezer for an hour or so to be",
"get them off...** They get big scratches from the pincers, get broken, etc.,...",
"This worked okay for small parts (as was the case with PLA). The",
"very well! All well for flex printing! Switched to PLA (which always worked",
"when I tried to detach it from the heat bed), as it didn't",
"printing! Switched to PLA (which always worked okay whatever some small errors in",
"part that I broke (the square impact in the middle is after ripping",
"tried: * Pincers (works for some items, doesn't work for some. About always",
"bed), as it didn't work at all I had to put it in",
"have all pieces sticking to the bed in a manner **I just cant",
"the glass so I added blue painters tape which makes it work, very",
"doesn't sense the surface (or the glass at all), but senses the heatbed",
"put it in the freezer for an hour or so to be able",
"a time waster. **My question is:** How can you both reliably print and",
"sensor didn't reach through those extra 3 mm of the glass, so I",
"another inductive sensor (old was 4 mm LJ12A3-4-Z/BY PNP with a voltage divider,",
"always makes marks); * Ripping off the blue painter tape (the tape was",
"in an uniform manner so it's not perfectly flat which means the Marlin",
"marks; 2. It's a serious hassle; 3. It's also a time waster. **My",
"flexible filament so first I modified my extruder motor/cog-wheel so it pushes the",
"the pincers, get broken, etc.,... I have tried: * Pincers (works for some",
"around on the glass so I added blue painters tape which makes it",
"an hour. It helps a lot but: 1. Still not easy to remove",
"perfectly well! Now I am able to tune in the first layer distance",
"It's also a time waster. **My question is:** How can you both reliably",
"image of the last part that I broke (the square impact in the",
"a voltage divider, new is 8 mm NPN) and this started to function",
"when they were big (as they didn't stick well, they corners warped ->",
"to upgrade my printer (Scratch XYCore-Bowden) to have the ability to use flexible",
"freezer for an hour or so to be able to remove the rest:",
"freezer for an hour. It helps a lot but: 1. Still not easy",
"the freezer for an hour. It helps a lot but: 1. Still not",
"Bowden tube (classic modification). This worked okay for small parts (as was the",
"an uniform manner so it's not perfectly flat which means the Marlin 3-point",
"for some items, doesn't work for some. About always makes marks); * Ripping",
"off...** They get big scratches from the pincers, get broken, etc.,... I have",
"heat-bed seems to flex when heating in an uniform manner so it's not",
"except where the item was stuck. Plus now I have to add new",
"floats around on the glass so I added blue painters tape which makes",
"function somehow: As the sensor doesn't sense the surface (or the glass at",
"sticking to the bed in a manner **I just cant get them off...**",
"middle is after ripping of the \"hook\" from this hanger when I tried",
"sticking on the build plate, especially when they were big (as they didn't",
"mm NPN) and this started to function somehow: As the sensor doesn't sense",
"wide items) and I have all pieces sticking to the bed in a",
"to detach it from the heat bed), as it didn't work at all",
"They get big scratches from the pincers, get broken, etc.,... I have tried:",
"PLA). The heat-bed seems to flex when heating in an uniform manner so",
"upgrade my printer (Scratch XYCore-Bowden) to have the ability to use flexible filament"
] |
[
"renders of STL files to a document. I currently open the STL files",
"STL files in Preview or one of the slicers and grab a screen",
"one of the slicers and grab a screen shot. Is there an easier",
"easier or automatic way to generate PNG images from STL files on a",
"I currently open the STL files in Preview or one of the slicers",
"of STL files to a document. I currently open the STL files in",
"slicers and grab a screen shot. Is there an easier or automatic way",
"screen shot. Is there an easier or automatic way to generate PNG images",
"need to add some simple image renders of STL files to a document.",
"of the slicers and grab a screen shot. Is there an easier or",
"files in Preview or one of the slicers and grab a screen shot.",
"grab a screen shot. Is there an easier or automatic way to generate",
"the slicers and grab a screen shot. Is there an easier or automatic",
"files to a document. I currently open the STL files in Preview or",
"or one of the slicers and grab a screen shot. Is there an",
"a screen shot. Is there an easier or automatic way to generate PNG",
"an easier or automatic way to generate PNG images from STL files on",
"open the STL files in Preview or one of the slicers and grab",
"STL files to a document. I currently open the STL files in Preview",
"I need to add some simple image renders of STL files to a",
"a document. I currently open the STL files in Preview or one of",
"document. I currently open the STL files in Preview or one of the",
"there an easier or automatic way to generate PNG images from STL files",
"image renders of STL files to a document. I currently open the STL",
"simple image renders of STL files to a document. I currently open the",
"in Preview or one of the slicers and grab a screen shot. Is",
"shot. Is there an easier or automatic way to generate PNG images from",
"and grab a screen shot. Is there an easier or automatic way to",
"Is there an easier or automatic way to generate PNG images from STL",
"the STL files in Preview or one of the slicers and grab a",
"to a document. I currently open the STL files in Preview or one",
"or automatic way to generate PNG images from STL files on a Mac?",
"some simple image renders of STL files to a document. I currently open",
"to add some simple image renders of STL files to a document. I",
"Preview or one of the slicers and grab a screen shot. Is there",
"currently open the STL files in Preview or one of the slicers and",
"add some simple image renders of STL files to a document. I currently"
] |
[
"countinue extruding. I am using 3D branche filament (it's a local store in",
"it click before the print. When it does that. I stop the print",
"printed a lot of stuff with those settings and they seem to work",
"they resolve it?** If anymore precision or clarification is needed, please ask. **EDIT**",
"please ask. **EDIT** When I say `boost` I mean that I have to",
"extruder keeps going perfectly fine for a while. I am using a Prusa",
"click before the print. When it does that. I stop the print and",
"similar and if they did, how did they resolve it?** If anymore precision",
"going. Once I done the *boost*, the extruder keeps going perfectly fine for",
"for it to countinue extruding. I am using 3D branche filament (it's a",
"a while. I am using a Prusa I3 clone bought second hand. I",
"well. I also bought the brand of same filament as he did for",
"before the print. When it does that. I stop the print and restart",
"also bought the brand of same filament as he did for my first",
"me (I personally know him). He previously printed a lot of stuff with",
"to countinue extruding. I am using 3D branche filament (it's a local store",
"of same filament as he did for my first roll. My question is:",
"I3 clone bought second hand. I am using the settings that the previous",
"I say `boost` I mean that I have to push it down a",
"have to give the filament a *boost* for it to keep going. Once",
"they seem to work well. I also bought the brand of same filament",
"or anything similar and if they did, how did they resolve it?** If",
"mean that I have to push it down a bit more for it",
"my first roll. My question is: **Has anyone had this problem or anything",
"I am using 3D branche filament (it's a local store in Montreal). I",
"or clarification is needed, please ask. **EDIT** When I say `boost` I mean",
"I will have to give the filament a *boost* for it to keep",
"a *boost* for it to keep going. Once I done the *boost*, the",
"is: **Has anyone had this problem or anything similar and if they did,",
"filament as he did for my first roll. My question is: **Has anyone",
"personally know him). He previously printed a lot of stuff with those settings",
"settings that the previous owner gave me (I personally know him). He previously",
"the extruder keeps going perfectly fine for a while. I am using a",
"the filament. I will have to give the filament a *boost* for it",
"how did they resolve it?** If anymore precision or clarification is needed, please",
"hand. I am using the settings that the previous owner gave me (I",
"am using the settings that the previous owner gave me (I personally know",
"bought the brand of same filament as he did for my first roll.",
"I done the *boost*, the extruder keeps going perfectly fine for a while.",
"needed, please ask. **EDIT** When I say `boost` I mean that I have",
"brand of same filament as he did for my first roll. My question",
"(I personally know him). He previously printed a lot of stuff with those",
"have difficulty extruding the filament. I will have to give the filament a",
"If anymore precision or clarification is needed, please ask. **EDIT** When I say",
"the printer will randomly have difficulty extruding the filament. I will have to",
"do sometime hear it click before the print. When it does that. I",
"filament a *boost* for it to keep going. Once I done the *boost*,",
"printer will randomly have difficulty extruding the filament. I will have to give",
"**EDIT** When I say `boost` I mean that I have to push it",
"bit more for it to countinue extruding. I am using 3D branche filament",
"using the settings that the previous owner gave me (I personally know him).",
"and if they did, how did they resolve it?** If anymore precision or",
"the *boost*, the extruder keeps going perfectly fine for a while. I am",
"to push it down a bit more for it to countinue extruding. I",
"anyone had this problem or anything similar and if they did, how did",
"second hand. I am using the settings that the previous owner gave me",
"in Montreal). I do sometime hear it click before the print. When it",
"roll. My question is: **Has anyone had this problem or anything similar and",
"using a Prusa I3 clone bought second hand. I am using the settings",
"settings and they seem to work well. I also bought the brand of",
"ask. **EDIT** When I say `boost` I mean that I have to push",
"perfectly fine for a while. I am using a Prusa I3 clone bought",
"during the print, the printer will randomly have difficulty extruding the filament. I",
"to give the filament a *boost* for it to keep going. Once I",
"it to countinue extruding. I am using 3D branche filament (it's a local",
"give the filament a *boost* for it to keep going. Once I done",
"the filament a *boost* for it to keep going. Once I done the",
"to keep going. Once I done the *boost*, the extruder keeps going perfectly",
"had this problem or anything similar and if they did, how did they",
"precision or clarification is needed, please ask. **EDIT** When I say `boost` I",
"sometime hear it click before the print. When it does that. I stop",
"of stuff with those settings and they seem to work well. I also",
"while. I am using a Prusa I3 clone bought second hand. I am",
"how to say this but during the print, the printer will randomly have",
"work well. I also bought the brand of same filament as he did",
"did they resolve it?** If anymore precision or clarification is needed, please ask.",
"*boost* for it to keep going. Once I done the *boost*, the extruder",
"it down a bit more for it to countinue extruding. I am using",
"print, the printer will randomly have difficulty extruding the filament. I will have",
"did for my first roll. My question is: **Has anyone had this problem",
"keeps going perfectly fine for a while. I am using a Prusa I3",
"first roll. My question is: **Has anyone had this problem or anything similar",
"to work well. I also bought the brand of same filament as he",
"know how to say this but during the print, the printer will randomly",
"he did for my first roll. My question is: **Has anyone had this",
"hear it click before the print. When it does that. I stop the",
"for it to keep going. Once I done the *boost*, the extruder keeps",
"I also bought the brand of same filament as he did for my",
"this problem or anything similar and if they did, how did they resolve",
"filament (it's a local store in Montreal). I do sometime hear it click",
"local store in Montreal). I do sometime hear it click before the print.",
"I don't know how to say this but during the print, the printer",
"done the *boost*, the extruder keeps going perfectly fine for a while. I",
"Montreal). I do sometime hear it click before the print. When it does",
"extruding. I am using 3D branche filament (it's a local store in Montreal).",
"extruding the filament. I will have to give the filament a *boost* for",
"resolve it?** If anymore precision or clarification is needed, please ask. **EDIT** When",
"keep going. Once I done the *boost*, the extruder keeps going perfectly fine",
"clone bought second hand. I am using the settings that the previous owner",
"stuff with those settings and they seem to work well. I also bought",
"but during the print, the printer will randomly have difficulty extruding the filament.",
"a lot of stuff with those settings and they seem to work well.",
"When I say `boost` I mean that I have to push it down",
"Once I done the *boost*, the extruder keeps going perfectly fine for a",
"problem or anything similar and if they did, how did they resolve it?**",
"will have to give the filament a *boost* for it to keep going.",
"a bit more for it to countinue extruding. I am using 3D branche",
"I have to push it down a bit more for it to countinue",
"question is: **Has anyone had this problem or anything similar and if they",
"(it's a local store in Montreal). I do sometime hear it click before",
"they did, how did they resolve it?** If anymore precision or clarification is",
"filament. I will have to give the filament a *boost* for it to",
"previous owner gave me (I personally know him). He previously printed a lot",
"seem to work well. I also bought the brand of same filament as",
"**Has anyone had this problem or anything similar and if they did, how",
"will randomly have difficulty extruding the filament. I will have to give the",
"with those settings and they seem to work well. I also bought the",
"a local store in Montreal). I do sometime hear it click before the",
"3D branche filament (it's a local store in Montreal). I do sometime hear",
"the print. When it does that. I stop the print and restart it.",
"it to keep going. Once I done the *boost*, the extruder keeps going",
"lot of stuff with those settings and they seem to work well. I",
"difficulty extruding the filament. I will have to give the filament a *boost*",
"randomly have difficulty extruding the filament. I will have to give the filament",
"more for it to countinue extruding. I am using 3D branche filament (it's",
"don't know how to say this but during the print, the printer will",
"going perfectly fine for a while. I am using a Prusa I3 clone",
"I am using the settings that the previous owner gave me (I personally",
"branche filament (it's a local store in Montreal). I do sometime hear it",
"did, how did they resolve it?** If anymore precision or clarification is needed,",
"as he did for my first roll. My question is: **Has anyone had",
"down a bit more for it to countinue extruding. I am using 3D",
"same filament as he did for my first roll. My question is: **Has",
"push it down a bit more for it to countinue extruding. I am",
"Prusa I3 clone bought second hand. I am using the settings that the",
"anymore precision or clarification is needed, please ask. **EDIT** When I say `boost`",
"this but during the print, the printer will randomly have difficulty extruding the",
"*boost*, the extruder keeps going perfectly fine for a while. I am using",
"My question is: **Has anyone had this problem or anything similar and if",
"owner gave me (I personally know him). He previously printed a lot of",
"and they seem to work well. I also bought the brand of same",
"gave me (I personally know him). He previously printed a lot of stuff",
"for a while. I am using a Prusa I3 clone bought second hand.",
"I do sometime hear it click before the print. When it does that.",
"He previously printed a lot of stuff with those settings and they seem",
"clarification is needed, please ask. **EDIT** When I say `boost` I mean that",
"him). He previously printed a lot of stuff with those settings and they",
"that the previous owner gave me (I personally know him). He previously printed",
"the print, the printer will randomly have difficulty extruding the filament. I will",
"those settings and they seem to work well. I also bought the brand",
"that I have to push it down a bit more for it to",
"am using 3D branche filament (it's a local store in Montreal). I do",
"store in Montreal). I do sometime hear it click before the print. When",
"say `boost` I mean that I have to push it down a bit",
"the previous owner gave me (I personally know him). He previously printed a",
"`boost` I mean that I have to push it down a bit more",
"a Prusa I3 clone bought second hand. I am using the settings that",
"previously printed a lot of stuff with those settings and they seem to",
"say this but during the print, the printer will randomly have difficulty extruding",
"know him). He previously printed a lot of stuff with those settings and",
"anything similar and if they did, how did they resolve it?** If anymore",
"I mean that I have to push it down a bit more for",
"the brand of same filament as he did for my first roll. My",
"is needed, please ask. **EDIT** When I say `boost` I mean that I",
"have to push it down a bit more for it to countinue extruding.",
"it?** If anymore precision or clarification is needed, please ask. **EDIT** When I",
"bought second hand. I am using the settings that the previous owner gave",
"the settings that the previous owner gave me (I personally know him). He",
"to say this but during the print, the printer will randomly have difficulty",
"am using a Prusa I3 clone bought second hand. I am using the",
"fine for a while. I am using a Prusa I3 clone bought second",
"I am using a Prusa I3 clone bought second hand. I am using",
"for my first roll. My question is: **Has anyone had this problem or",
"using 3D branche filament (it's a local store in Montreal). I do sometime",
"if they did, how did they resolve it?** If anymore precision or clarification"
] |
[
"set temperature say 220 °C, printer heats up to it and it only",
"hotend temperature drops](https://i.stack.imgur.com/w8SCE.png)](https://i.stack.imgur.com/w8SCE.png) What could be the reason? Electronics details: * Firmware used:",
"varies +/- 0.5 °C under non operating condition. But if I start a",
"a print, there's a shift of +/- 15 °C. I've already auto tuned",
"and it only varies +/- 0.5 °C under non operating condition. But if",
"`M503`, the printer shows the updated PID values. [](https://i.stack.imgur.com/w8SCE.png) What could be the reason?",
"start a print, there's a shift of +/- 15 °C. I've already auto",
"parameters and when I run `M503`, the printer shows the updated PID values.",
"If I set temperature say 220 °C, printer heats up to it and",
"drops](https://i.stack.imgur.com/w8SCE.png)](https://i.stack.imgur.com/w8SCE.png) What could be the reason? Electronics details: * Firmware used: Marlin *",
"PID values. [](https://i.stack.imgur.com/w8SCE.png) What could be the",
"say 220 °C, printer heats up to it and it only varies +/-",
"graph showing hotend temperature drops](https://i.stack.imgur.com/w8SCE.png)](https://i.stack.imgur.com/w8SCE.png) What could be the reason? Electronics details: *",
"°C. I've already auto tuned PID parameters and when I run `M503`, the",
"be the reason? Electronics details: * Firmware used: Marlin * Controller board: Printrboard",
"print, there's a shift of +/- 15 °C. I've already auto tuned PID",
"reason? Electronics details: * Firmware used: Marlin * Controller board: Printrboard rev D",
"when I run `M503`, the printer shows the updated PID values. [](https://i.stack.imgur.com/w8SCE.png) What could be the reason? Electronics details: * Firmware used: Marlin",
"heats up to it and it only varies +/- 0.5 °C under non",
"°C, printer heats up to it and it only varies +/- 0.5 °C",
"a shift of +/- 15 °C. I've already auto tuned PID parameters and",
"I've already auto tuned PID parameters and when I run `M503`, the printer",
"showing hotend temperature drops](https://i.stack.imgur.com/w8SCE.png)](https://i.stack.imgur.com/w8SCE.png) What could be the reason? Electronics details: * Firmware",
"I run `M503`, the printer shows the updated PID values. [](https://i.stack.imgur.com/w8SCE.png) What could be the reason? Electronics details:",
"operating condition. But if I start a print, there's a shift of +/-",
"to it and it only varies +/- 0.5 °C under non operating condition.",
"under non operating condition. But if I start a print, there's a shift",
"the printer shows the updated PID values. [](https://i.stack.imgur.com/w8SCE.png) What could",
"and when I run `M503`, the printer shows the updated PID values. [](https://i.stack.imgur.com/w8SCE.png)",
"updated PID values. [](https://i.stack.imgur.com/w8SCE.png) What could be",
"220 °C, printer heats up to it and it only varies +/- 0.5",
"condition. But if I start a print, there's a shift of +/- 15",
"shows the updated PID values. [](https://i.stack.imgur.com/w8SCE.png) What",
"could be the reason? Electronics details: * Firmware used: Marlin * Controller board:",
"it only varies +/- 0.5 °C under non operating condition. But if I",
"already auto tuned PID parameters and when I run `M503`, the printer shows",
"+/- 0.5 °C under non operating condition. But if I start a print,",
"[](https://i.stack.imgur.com/w8SCE.png) What could be the reason? Electronics"
] |
[
"seems to simply print a loop around, but not touching, my print. How",
"around, but not touching, my print. How is this supposed to help my",
"of the options under \"build plate adhesion\" is \"skirt\", which seems to simply",
"adhesion\" is \"skirt\", which seems to simply print a loop around, but not",
"options under \"build plate adhesion\" is \"skirt\", which seems to simply print a",
"touching, my print. How is this supposed to help my prints stick to",
"print. How is this supposed to help my prints stick to the bed?",
"my print. How is this supposed to help my prints stick to the",
"plate adhesion\" is \"skirt\", which seems to simply print a loop around, but",
"the options under \"build plate adhesion\" is \"skirt\", which seems to simply print",
"which seems to simply print a loop around, but not touching, my print.",
"loop around, but not touching, my print. How is this supposed to help",
"In cura one of the options under \"build plate adhesion\" is \"skirt\", which",
"is \"skirt\", which seems to simply print a loop around, but not touching,",
"print a loop around, but not touching, my print. How is this supposed",
"\"build plate adhesion\" is \"skirt\", which seems to simply print a loop around,",
"to simply print a loop around, but not touching, my print. How is",
"one of the options under \"build plate adhesion\" is \"skirt\", which seems to",
"but not touching, my print. How is this supposed to help my prints",
"not touching, my print. How is this supposed to help my prints stick",
"cura one of the options under \"build plate adhesion\" is \"skirt\", which seems",
"\"skirt\", which seems to simply print a loop around, but not touching, my",
"under \"build plate adhesion\" is \"skirt\", which seems to simply print a loop",
"simply print a loop around, but not touching, my print. How is this",
"a loop around, but not touching, my print. How is this supposed to"
] |
[
"with smooth vertical edges. Specifically, this model, [ID Badge Holder](https://www.thingiverse.com/thing:2517008), on the edges",
"the D&D figures I've printed, or some of the other thicker square pieces",
"model, [Cat Necklace](https://www.thingiverse.com/thing:2253220). Here is the resulting issue: [![Detached print wall](https://i.stack.imgur.com/VU11w.jpg \"Detached print",
"is an easy fix, I just don't know about it yet. I am",
"printing with a Monoprice Select Mini V2, using Hatchbox PLA, and the default",
"I don't have problems with any of the D&D figures I've printed, or",
"printed. I know I've got kind of a bargain printer; if it's just",
"Badge Holder](https://www.thingiverse.com/thing:2517008), on the edges where the lanyard would be attached. And on",
"using Hatchbox PLA, and the default slicing settings inside Cura. I don't have",
"Hatchbox PLA, and the default slicing settings inside Cura. I don't have problems",
"3D printing, so I'm sure this is an easy fix, I just don't",
"with, no problem. But if an expert knows of some slicer settings to",
"of the walls of certain prints becoming separated from the rest of the",
"got kind of a bargain printer; if it's just a quality issue I",
"problems with any of the D&D figures I've printed, or some of the",
"edges. Specifically, this model, [ID Badge Holder](https://www.thingiverse.com/thing:2517008), on the edges where the lanyard",
"of the model. It happens with smooth vertical edges. Specifically, this model, [ID",
"on several places on this model, [Cat Necklace](https://www.thingiverse.com/thing:2253220). Here is the resulting issue:",
"I've got kind of a bargain printer; if it's just a quality issue",
"prints becoming separated from the rest of the model. It happens with smooth",
"smooth vertical edges. Specifically, this model, [ID Badge Holder](https://www.thingiverse.com/thing:2517008), on the edges where",
"is the resulting issue: [![Detached print wall](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\")](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\")",
"of the other thicker square pieces I've printed. I know I've got kind",
"been having an issue with certain portions of the walls of certain prints",
"inside Cura. I don't have problems with any of the D&D figures I've",
"the walls of certain prints becoming separated from the rest of the model.",
"portions of the walls of certain prints becoming separated from the rest of",
"print wall](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\")](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\") I am quite new to",
"PLA, and the default slicing settings inside Cura. I don't have problems with",
"just a quality issue I have to learn to live with, no problem.",
"tweak for these kinds of prints with flat vertical walls, I'd love to",
"about it yet. I am printing with a Monoprice Select Mini V2, using",
"happens with smooth vertical edges. Specifically, this model, [ID Badge Holder](https://www.thingiverse.com/thing:2517008), on the",
"this model, [Cat Necklace](https://www.thingiverse.com/thing:2253220). Here is the resulting issue: [![Detached print wall](https://i.stack.imgur.com/VU11w.jpg \"Detached",
"for these kinds of prints with flat vertical walls, I'd love to give",
"easy fix, I just don't know about it yet. I am printing with",
"wall](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\")](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\") I am quite new to 3D",
"on the edges where the lanyard would be attached. And on several places",
"where the lanyard would be attached. And on several places on this model,",
"the model. It happens with smooth vertical edges. Specifically, this model, [ID Badge",
"am quite new to 3D printing, so I'm sure this is an easy",
"of the D&D figures I've printed, or some of the other thicker square",
"just don't know about it yet. I am printing with a Monoprice Select",
"don't know about it yet. I am printing with a Monoprice Select Mini",
"be attached. And on several places on this model, [Cat Necklace](https://www.thingiverse.com/thing:2253220). Here is",
"knows of some slicer settings to tweak for these kinds of prints with",
"issue with certain portions of the walls of certain prints becoming separated from",
"a quality issue I have to learn to live with, no problem. But",
"the lanyard would be attached. And on several places on this model, [Cat",
"I've printed, or some of the other thicker square pieces I've printed. I",
"don't have problems with any of the D&D figures I've printed, or some",
"print wall\") I am quite new to 3D printing, so I'm sure this",
"fix, I just don't know about it yet. I am printing with a",
"it yet. I am printing with a Monoprice Select Mini V2, using Hatchbox",
"settings inside Cura. I don't have problems with any of the D&D figures",
"printer; if it's just a quality issue I have to learn to live",
"the edges where the lanyard would be attached. And on several places on",
"[Cat Necklace](https://www.thingiverse.com/thing:2253220). Here is the resulting issue: [![Detached print wall](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\")](https://i.stack.imgur.com/VU11w.jpg",
"certain portions of the walls of certain prints becoming separated from the rest",
"on this model, [Cat Necklace](https://www.thingiverse.com/thing:2253220). Here is the resulting issue: [![Detached print wall](https://i.stack.imgur.com/VU11w.jpg",
"live with, no problem. But if an expert knows of some slicer settings",
"wall\") I am quite new to 3D printing, so I'm sure this is",
"this model, [ID Badge Holder](https://www.thingiverse.com/thing:2517008), on the edges where the lanyard would be",
"the default slicing settings inside Cura. I don't have problems with any of",
"or some of the other thicker square pieces I've printed. I know I've",
"printing, so I'm sure this is an easy fix, I just don't know",
"slicer settings to tweak for these kinds of prints with flat vertical walls,",
"know I've got kind of a bargain printer; if it's just a quality",
"rest of the model. It happens with smooth vertical edges. Specifically, this model,",
"Holder](https://www.thingiverse.com/thing:2517008), on the edges where the lanyard would be attached. And on several",
"so I'm sure this is an easy fix, I just don't know about",
"any of the D&D figures I've printed, or some of the other thicker",
"becoming separated from the rest of the model. It happens with smooth vertical",
"pieces I've printed. I know I've got kind of a bargain printer; if",
"I've printed. I know I've got kind of a bargain printer; if it's",
"I just don't know about it yet. I am printing with a Monoprice",
"if it's just a quality issue I have to learn to live with,",
"some slicer settings to tweak for these kinds of prints with flat vertical",
"have been having an issue with certain portions of the walls of certain",
"of a bargain printer; if it's just a quality issue I have to",
"thicker square pieces I've printed. I know I've got kind of a bargain",
"an expert knows of some slicer settings to tweak for these kinds of",
"Here is the resulting issue: [![Detached print wall](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\")](https://i.stack.imgur.com/VU11w.jpg \"Detached print",
"yet. I am printing with a Monoprice Select Mini V2, using Hatchbox PLA,",
"resulting issue: [![Detached print wall](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\")](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\") I am",
"having an issue with certain portions of the walls of certain prints becoming",
"V2, using Hatchbox PLA, and the default slicing settings inside Cura. I don't",
"walls of certain prints becoming separated from the rest of the model. It",
"D&D figures I've printed, or some of the other thicker square pieces I've",
"a bargain printer; if it's just a quality issue I have to learn",
"But if an expert knows of some slicer settings to tweak for these",
"model, [ID Badge Holder](https://www.thingiverse.com/thing:2517008), on the edges where the lanyard would be attached.",
"am printing with a Monoprice Select Mini V2, using Hatchbox PLA, and the",
"[ID Badge Holder](https://www.thingiverse.com/thing:2517008), on the edges where the lanyard would be attached. And",
"learn to live with, no problem. But if an expert knows of some",
"no problem. But if an expert knows of some slicer settings to tweak",
"vertical edges. Specifically, this model, [ID Badge Holder](https://www.thingiverse.com/thing:2517008), on the edges where the",
"I have been having an issue with certain portions of the walls of",
"this is an easy fix, I just don't know about it yet. I",
"the rest of the model. It happens with smooth vertical edges. Specifically, this",
"I know I've got kind of a bargain printer; if it's just a",
"I am quite new to 3D printing, so I'm sure this is an",
"settings to tweak for these kinds of prints with flat vertical walls, I'd",
"default slicing settings inside Cura. I don't have problems with any of the",
"wall\")](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\") I am quite new to 3D printing, so I'm",
"other thicker square pieces I've printed. I know I've got kind of a",
"attached. And on several places on this model, [Cat Necklace](https://www.thingiverse.com/thing:2253220). Here is the",
"Specifically, this model, [ID Badge Holder](https://www.thingiverse.com/thing:2517008), on the edges where the lanyard would",
"kinds of prints with flat vertical walls, I'd love to give it a",
"sure this is an easy fix, I just don't know about it yet.",
"square pieces I've printed. I know I've got kind of a bargain printer;",
"slicing settings inside Cura. I don't have problems with any of the D&D",
"I have to learn to live with, no problem. But if an expert",
"\"Detached print wall\")](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\") I am quite new to 3D printing,",
"separated from the rest of the model. It happens with smooth vertical edges.",
"if an expert knows of some slicer settings to tweak for these kinds",
"it's just a quality issue I have to learn to live with, no",
"an easy fix, I just don't know about it yet. I am printing",
"new to 3D printing, so I'm sure this is an easy fix, I",
"to 3D printing, so I'm sure this is an easy fix, I just",
"I'm sure this is an easy fix, I just don't know about it",
"expert knows of some slicer settings to tweak for these kinds of prints",
"issue: [![Detached print wall](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\")](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\") I am quite",
"bargain printer; if it's just a quality issue I have to learn to",
"problem. But if an expert knows of some slicer settings to tweak for",
"the resulting issue: [![Detached print wall](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\")](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\") I",
"of some slicer settings to tweak for these kinds of prints with flat",
"of prints with flat vertical walls, I'd love to give it a try.",
"have to learn to live with, no problem. But if an expert knows",
"several places on this model, [Cat Necklace](https://www.thingiverse.com/thing:2253220). Here is the resulting issue: [. Here is the resulting issue: [![Detached print wall](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\")](https://i.stack.imgur.com/VU11w.jpg \"Detached",
"some of the other thicker square pieces I've printed. I know I've got",
"an issue with certain portions of the walls of certain prints becoming separated",
"print wall\")](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\") I am quite new to 3D printing, so",
"know about it yet. I am printing with a Monoprice Select Mini V2,",
"[![Detached print wall](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\")](https://i.stack.imgur.com/VU11w.jpg \"Detached print wall\") I am quite new",
"with a Monoprice Select Mini V2, using Hatchbox PLA, and the default slicing",
"have problems with any of the D&D figures I've printed, or some of",
"kind of a bargain printer; if it's just a quality issue I have",
"from the rest of the model. It happens with smooth vertical edges. Specifically,",
"to tweak for these kinds of prints with flat vertical walls, I'd love",
"places on this model, [Cat Necklace](https://www.thingiverse.com/thing:2253220). Here is the resulting issue: [. Here",
"quite new to 3D printing, so I'm sure this is an easy fix,",
"It happens with smooth vertical edges. Specifically, this model, [ID Badge Holder](https://www.thingiverse.com/thing:2517008), on",
"quality issue I have to learn to live with, no problem. But if",
"and the default slicing settings inside Cura. I don't have problems with any",
"of certain prints becoming separated from the rest of the model. It happens",
"lanyard would be attached. And on several places on this model, [Cat Necklace](https://www.thingiverse.com/thing:2253220).",
"And on several places on this model, [Cat Necklace](https://www.thingiverse.com/thing:2253220). Here is the resulting",
"certain prints becoming separated from the rest of the model. It happens with",
"with any of the D&D figures I've printed, or some of the other",
"the other thicker square pieces I've printed. I know I've got kind of",
"to learn to live with, no problem. But if an expert knows of",
"model. It happens with smooth vertical edges. Specifically, this model, [ID Badge Holder](https://www.thingiverse.com/thing:2517008),",
"I am printing with a Monoprice Select Mini V2, using Hatchbox PLA, and",
"printed, or some of the other thicker square pieces I've printed. I know",
"a Monoprice Select Mini V2, using Hatchbox PLA, and the default slicing settings",
"Select Mini V2, using Hatchbox PLA, and the default slicing settings inside Cura."
] |
[
"my explanation makes sense, but here's what it comes down to: Does HIPS",
"during a print. The object I was printing was a hollow cylinder. The",
"print. The object I was printing was a hollow cylinder. The walls were",
"walls were about 5 mm thick, getting thinner near the top edge. At",
"edge. At the moment the walls started getting thinner, the problems started. I've",
"and the problems starts? I have also printed two copies of the object",
"and the extruder had to move around a lot. Is it possible that,",
"Is it possible that, at that moment, the filament moves too slow and",
"around a lot. Is it possible that, at that moment, the filament moves",
"occur. I hope my explanation makes sense, but here's what it comes down",
"filament moves too slow through the hotend. At the moment the clog occurred,",
"that, at that moment, the filament moves too slow and the problems starts?",
"near the top edge. At the moment the walls started getting thinner, the",
"at the same moment during a print. The object I was printing was",
"hollow cylinder. The walls were about 5 mm thick, getting thinner near the",
"then I got a very bad clog (required total disassembly of the extruder)",
"but then I got a very bad clog (required total disassembly of the",
"Haven't had any clogs with PLA and PETG, but with HIPS I've got",
"to move around a lot. Is it possible that, at that moment, the",
"was printing was a hollow cylinder. The walls were about 5 mm thick,",
"I hope my explanation makes sense, but here's what it comes down to:",
"(required total disassembly of the extruder) twice. And every time, it was at",
"in HIPS went fine, but then I got a very bad clog (required",
"move around a lot. Is it possible that, at that moment, the filament",
"was a hollow cylinder. The walls were about 5 mm thick, getting thinner",
"any clogs with PLA and PETG, but with HIPS I've got a weird",
"about 5 mm thick, getting thinner near the top edge. At the moment",
"every time, it was at the same moment during a print. The object",
"fine, but then I got a very bad clog (required total disassembly of",
"getting thinner near the top edge. At the moment the walls started getting",
"I've got a Prusa i3 MK3. I have printed with PLA, PETG and",
"tried HIPS. Haven't had any clogs with PLA and PETG, but with HIPS",
"started. I've read that HIPS can clog if the filament moves too slow",
"can clog if the filament moves too slow through the hotend. At the",
"a lot. Is it possible that, at that moment, the filament moves too",
"got a very bad clog (required total disassembly of the extruder) twice. And",
"clog occurred, the printer was printing a very narrow part, and the extruder",
"the filament moves too slow and the problems starts? I have also printed",
"clogs with PLA and PETG, but with HIPS I've got a weird problem.",
"lot. Is it possible that, at that moment, the filament moves too slow",
"the problems starts? I have also printed two copies of the object in",
"PETG, but with HIPS I've got a weird problem. My first three test",
"also printed two copies of the object in a single run, and then",
"extruder) twice. And every time, it was at the same moment during a",
"single run, and then the problem didn't occur. I hope my explanation makes",
"a hollow cylinder. The walls were about 5 mm thick, getting thinner near",
"moves too slow, and if it does, what can I do to solve",
"5 mm thick, getting thinner near the top edge. At the moment the",
"started getting thinner, the problems started. I've read that HIPS can clog if",
"two copies of the object in a single run, and then the problem",
"possible that, at that moment, the filament moves too slow and the problems",
"the top edge. At the moment the walls started getting thinner, the problems",
"a print. The object I was printing was a hollow cylinder. The walls",
"clog if the filament moves too slow through the hotend. At the moment",
"filament moves too slow, and if it does, what can I do to",
"too slow and the problems starts? I have also printed two copies of",
"getting thinner, the problems started. I've read that HIPS can clog if the",
"that moment, the filament moves too slow and the problems starts? I have",
"a very bad clog (required total disassembly of the extruder) twice. And every",
"At the moment the clog occurred, the printer was printing a very narrow",
"I have also printed two copies of the object in a single run,",
"prints in HIPS went fine, but then I got a very bad clog",
"the extruder) twice. And every time, it was at the same moment during",
"mm thick, getting thinner near the top edge. At the moment the walls",
"got a weird problem. My first three test prints in HIPS went fine,",
"total disassembly of the extruder) twice. And every time, it was at the",
"too slow, and if it does, what can I do to solve this?",
"a Prusa i3 MK3. I have printed with PLA, PETG and tried HIPS.",
"at that moment, the filament moves too slow and the problems starts? I",
"the filament moves too slow through the hotend. At the moment the clog",
"occurred, the printer was printing a very narrow part, and the extruder had",
"the printer was printing a very narrow part, and the extruder had to",
"PLA and PETG, but with HIPS I've got a weird problem. My first",
"MK3. I have printed with PLA, PETG and tried HIPS. Haven't had any",
"printing a very narrow part, and the extruder had to move around a",
"PLA, PETG and tried HIPS. Haven't had any clogs with PLA and PETG,",
"moment during a print. The object I was printing was a hollow cylinder.",
"and then the problem didn't occur. I hope my explanation makes sense, but",
"and PETG, but with HIPS I've got a weird problem. My first three",
"extruder had to move around a lot. Is it possible that, at that",
"The object I was printing was a hollow cylinder. The walls were about",
"thinner near the top edge. At the moment the walls started getting thinner,",
"I've got a weird problem. My first three test prints in HIPS went",
"copies of the object in a single run, and then the problem didn't",
"cylinder. The walls were about 5 mm thick, getting thinner near the top",
"it possible that, at that moment, the filament moves too slow and the",
"but here's what it comes down to: Does HIPS clog easily when the",
"object I was printing was a hollow cylinder. The walls were about 5",
"narrow part, and the extruder had to move around a lot. Is it",
"a weird problem. My first three test prints in HIPS went fine, but",
"but with HIPS I've got a weird problem. My first three test prints",
"had to move around a lot. Is it possible that, at that moment,",
"very bad clog (required total disassembly of the extruder) twice. And every time,",
"in a single run, and then the problem didn't occur. I hope my",
"problems started. I've read that HIPS can clog if the filament moves too",
"the clog occurred, the printer was printing a very narrow part, and the",
"problems starts? I have also printed two copies of the object in a",
"At the moment the walls started getting thinner, the problems started. I've read",
"and tried HIPS. Haven't had any clogs with PLA and PETG, but with",
"hotend. At the moment the clog occurred, the printer was printing a very",
"with PLA and PETG, but with HIPS I've got a weird problem. My",
"it was at the same moment during a print. The object I was",
"printing was a hollow cylinder. The walls were about 5 mm thick, getting",
"hope my explanation makes sense, but here's what it comes down to: Does",
"printer was printing a very narrow part, and the extruder had to move",
"HIPS can clog if the filament moves too slow through the hotend. At",
"problem didn't occur. I hope my explanation makes sense, but here's what it",
"what it comes down to: Does HIPS clog easily when the filament moves",
"very narrow part, and the extruder had to move around a lot. Is",
"moment the walls started getting thinner, the problems started. I've read that HIPS",
"slow through the hotend. At the moment the clog occurred, the printer was",
"down to: Does HIPS clog easily when the filament moves too slow, and",
"was printing a very narrow part, and the extruder had to move around",
"thick, getting thinner near the top edge. At the moment the walls started",
"the extruder had to move around a lot. Is it possible that, at",
"the moment the walls started getting thinner, the problems started. I've read that",
"easily when the filament moves too slow, and if it does, what can",
"slow and the problems starts? I have also printed two copies of the",
"starts? I have also printed two copies of the object in a single",
"Does HIPS clog easily when the filament moves too slow, and if it",
"part, and the extruder had to move around a lot. Is it possible",
"top edge. At the moment the walls started getting thinner, the problems started.",
"were about 5 mm thick, getting thinner near the top edge. At the",
"have printed with PLA, PETG and tried HIPS. Haven't had any clogs with",
"through the hotend. At the moment the clog occurred, the printer was printing",
"I got a very bad clog (required total disassembly of the extruder) twice.",
"moment the clog occurred, the printer was printing a very narrow part, and",
"a very narrow part, and the extruder had to move around a lot.",
"comes down to: Does HIPS clog easily when the filament moves too slow,",
"the filament moves too slow, and if it does, what can I do",
"first three test prints in HIPS went fine, but then I got a",
"filament moves too slow and the problems starts? I have also printed two",
"I was printing was a hollow cylinder. The walls were about 5 mm",
"printed two copies of the object in a single run, and then the",
"a single run, and then the problem didn't occur. I hope my explanation",
"i3 MK3. I have printed with PLA, PETG and tried HIPS. Haven't had",
"object in a single run, and then the problem didn't occur. I hope",
"HIPS clog easily when the filament moves too slow, and if it does,",
"twice. And every time, it was at the same moment during a print.",
"that HIPS can clog if the filament moves too slow through the hotend.",
"was at the same moment during a print. The object I was printing",
"thinner, the problems started. I've read that HIPS can clog if the filament",
"clog easily when the filament moves too slow, and if it does, what",
"here's what it comes down to: Does HIPS clog easily when the filament",
"have also printed two copies of the object in a single run, and",
"I've read that HIPS can clog if the filament moves too slow through",
"And every time, it was at the same moment during a print. The",
"then the problem didn't occur. I hope my explanation makes sense, but here's",
"when the filament moves too slow, and if it does, what can I",
"of the extruder) twice. And every time, it was at the same moment",
"makes sense, but here's what it comes down to: Does HIPS clog easily",
"too slow through the hotend. At the moment the clog occurred, the printer",
"the same moment during a print. The object I was printing was a",
"I have printed with PLA, PETG and tried HIPS. Haven't had any clogs",
"printed with PLA, PETG and tried HIPS. Haven't had any clogs with PLA",
"moment, the filament moves too slow and the problems starts? I have also",
"Prusa i3 MK3. I have printed with PLA, PETG and tried HIPS. Haven't",
"time, it was at the same moment during a print. The object I",
"the hotend. At the moment the clog occurred, the printer was printing a",
"read that HIPS can clog if the filament moves too slow through the",
"explanation makes sense, but here's what it comes down to: Does HIPS clog",
"disassembly of the extruder) twice. And every time, it was at the same",
"moves too slow and the problems starts? I have also printed two copies",
"sense, but here's what it comes down to: Does HIPS clog easily when",
"same moment during a print. The object I was printing was a hollow",
"walls started getting thinner, the problems started. I've read that HIPS can clog",
"the problem didn't occur. I hope my explanation makes sense, but here's what",
"with HIPS I've got a weird problem. My first three test prints in",
"moves too slow through the hotend. At the moment the clog occurred, the",
"had any clogs with PLA and PETG, but with HIPS I've got a",
"it comes down to: Does HIPS clog easily when the filament moves too",
"PETG and tried HIPS. Haven't had any clogs with PLA and PETG, but",
"the problems started. I've read that HIPS can clog if the filament moves",
"three test prints in HIPS went fine, but then I got a very",
"The walls were about 5 mm thick, getting thinner near the top edge.",
"HIPS went fine, but then I got a very bad clog (required total",
"to: Does HIPS clog easily when the filament moves too slow, and if",
"with PLA, PETG and tried HIPS. Haven't had any clogs with PLA and",
"if the filament moves too slow through the hotend. At the moment the",
"went fine, but then I got a very bad clog (required total disassembly",
"HIPS. Haven't had any clogs with PLA and PETG, but with HIPS I've",
"of the object in a single run, and then the problem didn't occur.",
"clog (required total disassembly of the extruder) twice. And every time, it was",
"the moment the clog occurred, the printer was printing a very narrow part,",
"the walls started getting thinner, the problems started. I've read that HIPS can",
"got a Prusa i3 MK3. I have printed with PLA, PETG and tried",
"HIPS I've got a weird problem. My first three test prints in HIPS",
"My first three test prints in HIPS went fine, but then I got",
"bad clog (required total disassembly of the extruder) twice. And every time, it",
"problem. My first three test prints in HIPS went fine, but then I",
"the object in a single run, and then the problem didn't occur. I",
"run, and then the problem didn't occur. I hope my explanation makes sense,",
"test prints in HIPS went fine, but then I got a very bad",
"weird problem. My first three test prints in HIPS went fine, but then",
"didn't occur. I hope my explanation makes sense, but here's what it comes"
] |
[
"home position that it ground a permanent line on the bed. It's trying",
"is near-perfect. But when I start a print job, the nozzle is much",
"speed settings remained untouched. How can I solve this? The issue popped up",
"Z axis is suddenly acting very odd. When I 'home' the Z axis",
"good. It's not the Z-axis limiter switch. I confirmed that is both working",
"at the point now where I can't print anything that I could before,",
"when I start a print job, the nozzle is much lower - by",
"is suddenly acting very odd. When I 'home' the Z axis and move",
"lower - by at least 1-2 mm. This causes the print head to",
"problem. My heat and speed settings remained untouched. How can I solve this?",
"1-2 mm. This causes the print head to grind against the print bed,",
"never seen it where the print job actually starts lower than the true",
"Not good. It's not the Z-axis limiter switch. I confirmed that is both",
"pretty much destroyed. The nozzle is so much lower at the start of",
"'too high'), especially after changing nozzles, but not 'too low', and I've never",
"near-perfect. But when I start a print job, the nozzle is much lower",
"very first printer, a Monoprice Select Mini V2. After doing about 20 successful",
"much destroyed. The nozzle is so much lower at the start of a",
"causes the print head to grind against the print bed, which I unfortunately",
"it where the print job actually starts lower than the true zero position.",
"GCODE file at all. I'm at the point now where I can't print",
"can I solve this? The issue popped up just after doing a successful",
"print anything that I could before, without having this problem. My heat and",
"this problem. My heat and speed settings remained untouched. How can I solve",
"heard of the opposite problem (Z-Axis 'too high'), especially after changing nozzles, but",
"Select Mini V2. After doing about 20 successful prints on it, the Z",
"surface. Not good. It's not the Z-axis limiter switch. I confirmed that is",
"I unfortunately need to replace as it's pretty much destroyed. The nozzle is",
"bed, which I unfortunately need to replace as it's pretty much destroyed. The",
"software from the equation by printing something I had printed successfully just a",
"there's enough pressure on the nozzle to not let any filament escape -",
"on the nozzle to not let any filament escape - leaving a bad",
"job than it is at the home position that it ground a permanent",
"a print job, the nozzle is much lower - by at least 1-2",
"I start a print job that it ends up lower, almost as if",
"gouge like I dragged a screwdriver across the print surface. Not good. It's",
"I could before, without having this problem. My heat and speed settings remained",
"that is both working and secured tightly to the printer body. When homing",
"of the bed without issue - the leveling is near-perfect. But when I",
"had printed successfully just a couple hours prior - without reslicing or modifying",
"permanent line on the bed. It's trying to go so low, there's enough",
"to replace as it's pretty much destroyed. The nozzle is so much lower",
"a permanent line on the bed. It's trying to go so low, there's",
"replace as it's pretty much destroyed. The nozzle is so much lower at",
"at the start of a print job than it is at the home",
"stops at that position correctly. It's only when I start a print job",
"V2. After doing about 20 successful prints on it, the Z axis is",
"when I start a print job that it ends up lower, almost as",
"I had printed successfully just a couple hours prior - without reslicing or",
"to grind against the print bed, which I unfortunately need to replace as",
"a print job than it is at the home position that it ground",
"on all four corners of the bed without issue - the leveling is",
"successful print. What gives? I've heard of the opposite problem (Z-Axis 'too high'),",
"the nozzle is much lower - by at least 1-2 mm. This causes",
"it ground a permanent line on the bed. It's trying to go so",
"move the nozzle on the X and Y, I can do the paper",
"the print bed, which I unfortunately need to replace as it's pretty much",
"at the home position that it ground a permanent line on the bed.",
"- without reslicing or modifying the GCODE file at all. I'm at the",
"job that it ends up lower, almost as if it's ignoring the switch.",
"position correctly. It's only when I start a print job that it ends",
"the nozzle on the X and Y, I can do the paper test",
"printer stops at that position correctly. It's only when I start a print",
"is much lower - by at least 1-2 mm. This causes the print",
"correctly. It's only when I start a print job that it ends up",
"Monoprice Select Mini V2. After doing about 20 successful prints on it, the",
"start a print job, the nozzle is much lower - by at least",
"could before, without having this problem. My heat and speed settings remained untouched.",
"body. When homing the Z axis, I can hear the switch click and",
"a Monoprice Select Mini V2. After doing about 20 successful prints on it,",
"much lower at the start of a print job than it is at",
"issue popped up just after doing a successful print. What gives? I've heard",
"destroyed. The nozzle is so much lower at the start of a print",
"prior - without reslicing or modifying the GCODE file at all. I'm at",
"I can do the paper test on all four corners of the bed",
"'too low', and I've never seen it where the print job actually starts",
"popped up just after doing a successful print. What gives? I've heard of",
"I confirmed that is both working and secured tightly to the printer body.",
"ground a permanent line on the bed. It's trying to go so low,",
"a couple hours prior - without reslicing or modifying the GCODE file at",
"anything that I could before, without having this problem. My heat and speed",
"at that position correctly. It's only when I start a print job that",
"only when I start a print job that it ends up lower, almost",
"gives? I've heard of the opposite problem (Z-Axis 'too high'), especially after changing",
"print job than it is at the home position that it ground a",
"now where I can't print anything that I could before, without having this",
"enough pressure on the nozzle to not let any filament escape - leaving",
"let any filament escape - leaving a bad gouge like I dragged a",
"my slicer software from the equation by printing something I had printed successfully",
"like I dragged a screwdriver across the print surface. Not good. It's not",
"heat and speed settings remained untouched. How can I solve this? The issue",
"just a couple hours prior - without reslicing or modifying the GCODE file",
"working and secured tightly to the printer body. When homing the Z axis,",
"I'm at the point now where I can't print anything that I could",
"at all. I'm at the point now where I can't print anything that",
"axis is suddenly acting very odd. When I 'home' the Z axis and",
"odd. When I 'home' the Z axis and move the nozzle on the",
"on the bed. It's trying to go so low, there's enough pressure on",
"changing nozzles, but not 'too low', and I've never seen it where the",
"is so much lower at the start of a print job than it",
"Mini V2. After doing about 20 successful prints on it, the Z axis",
"is both working and secured tightly to the printer body. When homing the",
"the bed without issue - the leveling is near-perfect. But when I start",
"Z-axis limiter switch. I confirmed that is both working and secured tightly to",
"print head to grind against the print bed, which I unfortunately need to",
"need to replace as it's pretty much destroyed. The nozzle is so much",
"It's trying to go so low, there's enough pressure on the nozzle to",
"I've never seen it where the print job actually starts lower than the",
"start of a print job than it is at the home position that",
"before, without having this problem. My heat and speed settings remained untouched. How",
"printing something I had printed successfully just a couple hours prior - without",
"couple hours prior - without reslicing or modifying the GCODE file at all.",
"which I unfortunately need to replace as it's pretty much destroyed. The nozzle",
"the print head to grind against the print bed, which I unfortunately need",
"where I can't print anything that I could before, without having this problem.",
"nozzles, but not 'too low', and I've never seen it where the print",
"the start of a print job than it is at the home position",
"nozzle is so much lower at the start of a print job than",
"seen it where the print job actually starts lower than the true zero",
"the switch click and the printer stops at that position correctly. It's only",
"It's only when I start a print job that it ends up lower,",
"without having this problem. My heat and speed settings remained untouched. How can",
"to the printer body. When homing the Z axis, I can hear the",
"low, there's enough pressure on the nozzle to not let any filament escape",
"not let any filament escape - leaving a bad gouge like I dragged",
"and move the nozzle on the X and Y, I can do the",
"about 20 successful prints on it, the Z axis is suddenly acting very",
"secured tightly to the printer body. When homing the Z axis, I can",
"leaving a bad gouge like I dragged a screwdriver across the print surface.",
"to not let any filament escape - leaving a bad gouge like I",
"from the equation by printing something I had printed successfully just a couple",
"just after doing a successful print. What gives? I've heard of the opposite",
"I 'home' the Z axis and move the nozzle on the X and",
"especially after changing nozzles, but not 'too low', and I've never seen it",
"to go so low, there's enough pressure on the nozzle to not let",
"When I 'home' the Z axis and move the nozzle on the X",
"first printer, a Monoprice Select Mini V2. After doing about 20 successful prints",
"a bad gouge like I dragged a screwdriver across the print surface. Not",
"nozzle is much lower - by at least 1-2 mm. This causes the",
"switch click and the printer stops at that position correctly. It's only when",
"four corners of the bed without issue - the leveling is near-perfect. But",
"axis and move the nozzle on the X and Y, I can do",
"opposite problem (Z-Axis 'too high'), especially after changing nozzles, but not 'too low',",
"ignoring the switch. I also eliminated my slicer software from the equation by",
"start a print job that it ends up lower, almost as if it's",
"doing a successful print. What gives? I've heard of the opposite problem (Z-Axis",
"Z axis and move the nozzle on the X and Y, I can",
"I've heard of the opposite problem (Z-Axis 'too high'), especially after changing nozzles,",
"After doing about 20 successful prints on it, the Z axis is suddenly",
"the Z axis, I can hear the switch click and the printer stops",
"position that it ground a permanent line on the bed. It's trying to",
"job, the nozzle is much lower - by at least 1-2 mm. This",
"print. What gives? I've heard of the opposite problem (Z-Axis 'too high'), especially",
"without reslicing or modifying the GCODE file at all. I'm at the point",
"the GCODE file at all. I'm at the point now where I can't",
"X and Y, I can do the paper test on all four corners",
"and Y, I can do the paper test on all four corners of",
"can do the paper test on all four corners of the bed without",
"all four corners of the bed without issue - the leveling is near-perfect.",
"not the Z-axis limiter switch. I confirmed that is both working and secured",
"is at the home position that it ground a permanent line on the",
"prints on it, the Z axis is suddenly acting very odd. When I",
"the point now where I can't print anything that I could before, without",
"and speed settings remained untouched. How can I solve this? The issue popped",
"successfully just a couple hours prior - without reslicing or modifying the GCODE",
"leveling is near-perfect. But when I start a print job, the nozzle is",
"the nozzle to not let any filament escape - leaving a bad gouge",
"successful prints on it, the Z axis is suddenly acting very odd. When",
"reslicing or modifying the GCODE file at all. I'm at the point now",
"go so low, there's enough pressure on the nozzle to not let any",
"on it, the Z axis is suddenly acting very odd. When I 'home'",
"mm. This causes the print head to grind against the print bed, which",
"trying to go so low, there's enough pressure on the nozzle to not",
"that position correctly. It's only when I start a print job that it",
"dragged a screwdriver across the print surface. Not good. It's not the Z-axis",
"the leveling is near-perfect. But when I start a print job, the nozzle",
"Z axis, I can hear the switch click and the printer stops at",
"of a print job than it is at the home position that it",
"all. I'm at the point now where I can't print anything that I",
"limiter switch. I confirmed that is both working and secured tightly to the",
"that it ground a permanent line on the bed. It's trying to go",
"as if it's ignoring the switch. I also eliminated my slicer software from",
"file at all. I'm at the point now where I can't print anything",
"at least 1-2 mm. This causes the print head to grind against the",
"the Z-axis limiter switch. I confirmed that is both working and secured tightly",
"Y, I can do the paper test on all four corners of the",
"bed without issue - the leveling is near-perfect. But when I start a",
"problem (Z-Axis 'too high'), especially after changing nozzles, but not 'too low', and",
"- the leveling is near-perfect. But when I start a print job, the",
"and I've never seen it where the print job actually starts lower than",
"pressure on the nozzle to not let any filament escape - leaving a",
"so much lower at the start of a print job than it is",
"the printer body. When homing the Z axis, I can hear the switch",
"axis, I can hear the switch click and the printer stops at that",
"the switch. I also eliminated my slicer software from the equation by printing",
"very odd. When I 'home' the Z axis and move the nozzle on",
"can hear the switch click and the printer stops at that position correctly.",
"it ends up lower, almost as if it's ignoring the switch. I also",
"against the print bed, which I unfortunately need to replace as it's pretty",
"20 successful prints on it, the Z axis is suddenly acting very odd.",
"I start a print job, the nozzle is much lower - by at",
"that it ends up lower, almost as if it's ignoring the switch. I",
"hear the switch click and the printer stops at that position correctly. It's",
"(Z-Axis 'too high'), especially after changing nozzles, but not 'too low', and I've",
"ends up lower, almost as if it's ignoring the switch. I also eliminated",
"the home position that it ground a permanent line on the bed. It's",
"on the X and Y, I can do the paper test on all",
"the opposite problem (Z-Axis 'too high'), especially after changing nozzles, but not 'too",
"grind against the print bed, which I unfortunately need to replace as it's",
"acting very odd. When I 'home' the Z axis and move the nozzle",
"line on the bed. It's trying to go so low, there's enough pressure",
"hours prior - without reslicing or modifying the GCODE file at all. I'm",
"I'm having an issue with my very first printer, a Monoprice Select Mini",
"test on all four corners of the bed without issue - the leveling",
"switch. I also eliminated my slicer software from the equation by printing something",
"suddenly acting very odd. When I 'home' the Z axis and move the",
"printed successfully just a couple hours prior - without reslicing or modifying the",
"than it is at the home position that it ground a permanent line",
"something I had printed successfully just a couple hours prior - without reslicing",
"least 1-2 mm. This causes the print head to grind against the print",
"by printing something I had printed successfully just a couple hours prior -",
"escape - leaving a bad gouge like I dragged a screwdriver across the",
"and the printer stops at that position correctly. It's only when I start",
"I can't print anything that I could before, without having this problem. My",
"and secured tightly to the printer body. When homing the Z axis, I",
"corners of the bed without issue - the leveling is near-perfect. But when",
"It's not the Z-axis limiter switch. I confirmed that is both working and",
"both working and secured tightly to the printer body. When homing the Z",
"lower at the start of a print job than it is at the",
"unfortunately need to replace as it's pretty much destroyed. The nozzle is so",
"it's ignoring the switch. I also eliminated my slicer software from the equation",
"it, the Z axis is suddenly acting very odd. When I 'home' the",
"What gives? I've heard of the opposite problem (Z-Axis 'too high'), especially after",
"- leaving a bad gouge like I dragged a screwdriver across the print",
"- by at least 1-2 mm. This causes the print head to grind",
"do the paper test on all four corners of the bed without issue",
"not 'too low', and I've never seen it where the print job actually",
"nozzle on the X and Y, I can do the paper test on",
"printer body. When homing the Z axis, I can hear the switch click",
"print bed, which I unfortunately need to replace as it's pretty much destroyed.",
"I also eliminated my slicer software from the equation by printing something I",
"I solve this? The issue popped up just after doing a successful print.",
"an issue with my very first printer, a Monoprice Select Mini V2. After",
"my very first printer, a Monoprice Select Mini V2. After doing about 20",
"printer, a Monoprice Select Mini V2. After doing about 20 successful prints on",
"can't print anything that I could before, without having this problem. My heat",
"so low, there's enough pressure on the nozzle to not let any filament",
"the printer stops at that position correctly. It's only when I start a",
"a successful print. What gives? I've heard of the opposite problem (Z-Axis 'too",
"that I could before, without having this problem. My heat and speed settings",
"much lower - by at least 1-2 mm. This causes the print head",
"remained untouched. How can I solve this? The issue popped up just after",
"head to grind against the print bed, which I unfortunately need to replace",
"but not 'too low', and I've never seen it where the print job",
"slicer software from the equation by printing something I had printed successfully just",
"it's pretty much destroyed. The nozzle is so much lower at the start",
"print surface. Not good. It's not the Z-axis limiter switch. I confirmed that",
"nozzle to not let any filament escape - leaving a bad gouge like",
"up lower, almost as if it's ignoring the switch. I also eliminated my",
"I dragged a screwdriver across the print surface. Not good. It's not the",
"My heat and speed settings remained untouched. How can I solve this? The",
"issue with my very first printer, a Monoprice Select Mini V2. After doing",
"the paper test on all four corners of the bed without issue -",
"homing the Z axis, I can hear the switch click and the printer",
"the X and Y, I can do the paper test on all four",
"But when I start a print job, the nozzle is much lower -",
"the Z axis and move the nozzle on the X and Y, I",
"high'), especially after changing nozzles, but not 'too low', and I've never seen",
"low', and I've never seen it where the print job actually starts lower",
"as it's pretty much destroyed. The nozzle is so much lower at the",
"where the print job actually starts lower than the true zero position. Help!",
"screwdriver across the print surface. Not good. It's not the Z-axis limiter switch.",
"a screwdriver across the print surface. Not good. It's not the Z-axis limiter",
"confirmed that is both working and secured tightly to the printer body. When",
"bed. It's trying to go so low, there's enough pressure on the nozzle",
"'home' the Z axis and move the nozzle on the X and Y,",
"across the print surface. Not good. It's not the Z-axis limiter switch. I",
"The nozzle is so much lower at the start of a print job",
"untouched. How can I solve this? The issue popped up just after doing",
"settings remained untouched. How can I solve this? The issue popped up just",
"after doing a successful print. What gives? I've heard of the opposite problem",
"by at least 1-2 mm. This causes the print head to grind against",
"if it's ignoring the switch. I also eliminated my slicer software from the",
"also eliminated my slicer software from the equation by printing something I had",
"the bed. It's trying to go so low, there's enough pressure on the",
"the Z axis is suddenly acting very odd. When I 'home' the Z",
"it is at the home position that it ground a permanent line on",
"filament escape - leaving a bad gouge like I dragged a screwdriver across",
"having this problem. My heat and speed settings remained untouched. How can I",
"almost as if it's ignoring the switch. I also eliminated my slicer software",
"up just after doing a successful print. What gives? I've heard of the",
"switch. I confirmed that is both working and secured tightly to the printer",
"This causes the print head to grind against the print bed, which I",
"this? The issue popped up just after doing a successful print. What gives?",
"bad gouge like I dragged a screwdriver across the print surface. Not good.",
"lower, almost as if it's ignoring the switch. I also eliminated my slicer",
"eliminated my slicer software from the equation by printing something I had printed",
"The issue popped up just after doing a successful print. What gives? I've",
"the print surface. Not good. It's not the Z-axis limiter switch. I confirmed",
"click and the printer stops at that position correctly. It's only when I",
"the equation by printing something I had printed successfully just a couple hours",
"doing about 20 successful prints on it, the Z axis is suddenly acting",
"or modifying the GCODE file at all. I'm at the point now where",
"When homing the Z axis, I can hear the switch click and the",
"without issue - the leveling is near-perfect. But when I start a print",
"any filament escape - leaving a bad gouge like I dragged a screwdriver",
"with my very first printer, a Monoprice Select Mini V2. After doing about",
"modifying the GCODE file at all. I'm at the point now where I",
"point now where I can't print anything that I could before, without having",
"I can hear the switch click and the printer stops at that position",
"after changing nozzles, but not 'too low', and I've never seen it where",
"equation by printing something I had printed successfully just a couple hours prior",
"solve this? The issue popped up just after doing a successful print. What",
"How can I solve this? The issue popped up just after doing a",
"paper test on all four corners of the bed without issue - the",
"of the opposite problem (Z-Axis 'too high'), especially after changing nozzles, but not",
"having an issue with my very first printer, a Monoprice Select Mini V2.",
"issue - the leveling is near-perfect. But when I start a print job,",
"tightly to the printer body. When homing the Z axis, I can hear",
"print job that it ends up lower, almost as if it's ignoring the",
"a print job that it ends up lower, almost as if it's ignoring",
"print job, the nozzle is much lower - by at least 1-2 mm."
] |
[
"started making a clicking/ticking noise. Our printer is a Flashforge Dreamer. What is",
"a clicking/ticking noise. Our printer is a Flashforge Dreamer. What is wrong with",
"into the right side and started making a clicking/ticking noise. Our printer is",
"print anything. We unloaded the ABS that was in the printer and then",
"we had our test sample. We then stopped the loading process and started",
"sample. We then stopped the loading process and started the loading process again",
"making a clicking/ticking noise. Our printer is a Flashforge Dreamer. What is wrong",
"unloaded the ABS that was in the printer and then started loading some",
"the PVA was loaded we let it keep going through the loading process",
"Now, the ABS will not load into the right side and started making",
"the loading process until it pushed all the PVA out and we had",
"and started making a clicking/ticking noise. Our printer is a Flashforge Dreamer. What",
"post process properties of PVA but did not want to print anything. We",
"properties of PVA but did not want to print anything. We unloaded the",
"we could continue with normal printing procedures. Now, the ABS will not load",
"ABS will not load into the right side and started making a clicking/ticking",
"Our printer is a Flashforge Dreamer. What is wrong with my printer and",
"put the ABS back so we could continue with normal printing procedures. Now,",
"it pushed all the PVA out and we had our test sample. We",
"some PVA. After the PVA was loaded we let it keep going through",
"the loading process again to put the ABS back so we could continue",
"load into the right side and started making a clicking/ticking noise. Our printer",
"loading process until it pushed all the PVA out and we had our",
"PVA but did not want to print anything. We unloaded the ABS that",
"the ABS will not load into the right side and started making a",
"started the loading process again to put the ABS back so we could",
"going through the loading process until it pushed all the PVA out and",
"again to put the ABS back so we could continue with normal printing",
"printer and then started loading some PVA. After the PVA was loaded we",
"had our test sample. We then stopped the loading process and started the",
"a Flashforge Dreamer. What is wrong with my printer and how can I",
"loading process and started the loading process again to put the ABS back",
"the PVA out and we had our test sample. We then stopped the",
"the ABS back so we could continue with normal printing procedures. Now, the",
"side and started making a clicking/ticking noise. Our printer is a Flashforge Dreamer.",
"until it pushed all the PVA out and we had our test sample.",
"Flashforge Dreamer. What is wrong with my printer and how can I fix",
"process properties of PVA but did not want to print anything. We unloaded",
"is a Flashforge Dreamer. What is wrong with my printer and how can",
"of PVA but did not want to print anything. We unloaded the ABS",
"want to print anything. We unloaded the ABS that was in the printer",
"all the PVA out and we had our test sample. We then stopped",
"to print anything. We unloaded the ABS that was in the printer and",
"We wanted to test the post process properties of PVA but did not",
"PVA. After the PVA was loaded we let it keep going through the",
"noise. Our printer is a Flashforge Dreamer. What is wrong with my printer",
"but did not want to print anything. We unloaded the ABS that was",
"to put the ABS back so we could continue with normal printing procedures.",
"the right side and started making a clicking/ticking noise. Our printer is a",
"process until it pushed all the PVA out and we had our test",
"We then stopped the loading process and started the loading process again to",
"was loaded we let it keep going through the loading process until it",
"to test the post process properties of PVA but did not want to",
"the post process properties of PVA but did not want to print anything.",
"that was in the printer and then started loading some PVA. After the",
"started loading some PVA. After the PVA was loaded we let it keep",
"let it keep going through the loading process until it pushed all the",
"right side and started making a clicking/ticking noise. Our printer is a Flashforge",
"printer is a Flashforge Dreamer. What is wrong with my printer and how",
"not want to print anything. We unloaded the ABS that was in the",
"test sample. We then stopped the loading process and started the loading process",
"will not load into the right side and started making a clicking/ticking noise.",
"anything. We unloaded the ABS that was in the printer and then started",
"clicking/ticking noise. Our printer is a Flashforge Dreamer. What is wrong with my",
"back so we could continue with normal printing procedures. Now, the ABS will",
"out and we had our test sample. We then stopped the loading process",
"loading some PVA. After the PVA was loaded we let it keep going",
"then stopped the loading process and started the loading process again to put",
"Dreamer. What is wrong with my printer and how can I fix it?",
"ABS that was in the printer and then started loading some PVA. After",
"in the printer and then started loading some PVA. After the PVA was",
"normal printing procedures. Now, the ABS will not load into the right side",
"we let it keep going through the loading process until it pushed all",
"ABS back so we could continue with normal printing procedures. Now, the ABS",
"loading process again to put the ABS back so we could continue with",
"printing procedures. Now, the ABS will not load into the right side and",
"not load into the right side and started making a clicking/ticking noise. Our",
"keep going through the loading process until it pushed all the PVA out",
"We unloaded the ABS that was in the printer and then started loading",
"PVA was loaded we let it keep going through the loading process until",
"pushed all the PVA out and we had our test sample. We then",
"PVA out and we had our test sample. We then stopped the loading",
"and then started loading some PVA. After the PVA was loaded we let",
"test the post process properties of PVA but did not want to print",
"could continue with normal printing procedures. Now, the ABS will not load into",
"was in the printer and then started loading some PVA. After the PVA",
"process and started the loading process again to put the ABS back so",
"and started the loading process again to put the ABS back so we",
"the ABS that was in the printer and then started loading some PVA.",
"our test sample. We then stopped the loading process and started the loading",
"After the PVA was loaded we let it keep going through the loading",
"and we had our test sample. We then stopped the loading process and",
"wanted to test the post process properties of PVA but did not want",
"procedures. Now, the ABS will not load into the right side and started",
"through the loading process until it pushed all the PVA out and we",
"so we could continue with normal printing procedures. Now, the ABS will not",
"the loading process and started the loading process again to put the ABS",
"then started loading some PVA. After the PVA was loaded we let it",
"continue with normal printing procedures. Now, the ABS will not load into the",
"stopped the loading process and started the loading process again to put the",
"did not want to print anything. We unloaded the ABS that was in",
"process again to put the ABS back so we could continue with normal",
"the printer and then started loading some PVA. After the PVA was loaded",
"with normal printing procedures. Now, the ABS will not load into the right",
"loaded we let it keep going through the loading process until it pushed",
"it keep going through the loading process until it pushed all the PVA"
] |
[
"know how this happened and what I can do to prevent it from",
"of the glass plate, and the whole thing slipped an inch or so.",
"2 days into a 5-day build, I came home from work and found",
"the heated surface, remaining clipped to the top and bottom of the glass",
"I can do to prevent it from happening again. What typically causes the",
"the printer, which hold the glass build plate plate to the heated surface",
"and two standard binder clips at the front, which shipped with the printer,",
"one, but before I do I'd like to know how this happened and",
"days into a 5-day build, I came home from work and found the",
"edges help? I'd really prefer not to ruin more builds if I can",
"surface beneath. The left-side clip had come off of the heated surface, remaining",
"prevent it from happening again. What typically causes the plate clips to come",
"happening again. What typically causes the plate clips to come free? Is there",
"4 clips: two stationary ones at the back, and two standard binder clips",
"plate to the heated surface beneath. The left-side clip had come off of",
"clips around the edges help? I'd really prefer not to ruin more builds",
"comes with it, attached via 4 clips: two stationary ones at the back,",
"two stationary ones at the back, and two standard binder clips at the",
"which shipped with the printer, which hold the glass build plate plate to",
"immediately canceled the build, and I can start another one, but before I",
"5-day build, I came home from work and found the build ruined because",
"build, and I can start another one, but before I do I'd like",
"at the front, which shipped with the printer, which hold the glass build",
"binder clips at the front, which shipped with the printer, which hold the",
"but before I do I'd like to know how this happened and what",
"free? Is there anything I can do about it? Will adding more clips",
"plate had slipped. I'm using a Raise 3D N2 Plus printer, with the",
"had slipped. I'm using a Raise 3D N2 Plus printer, with the standard",
"or so. I immediately canceled the build, and I can start another one,",
"can do to prevent it from happening again. What typically causes the plate",
"anything I can do about it? Will adding more clips around the edges",
"the standard glass build plate that comes with it, attached via 4 clips:",
"printer, which hold the glass build plate plate to the heated surface beneath.",
"slipped. I'm using a Raise 3D N2 Plus printer, with the standard glass",
"the front, which shipped with the printer, which hold the glass build plate",
"I came home from work and found the build ruined because the build",
"build plate had slipped. I'm using a Raise 3D N2 Plus printer, with",
"plate plate to the heated surface beneath. The left-side clip had come off",
"before I do I'd like to know how this happened and what I",
"I do I'd like to know how this happened and what I can",
"at the back, and two standard binder clips at the front, which shipped",
"standard binder clips at the front, which shipped with the printer, which hold",
"the build, and I can start another one, but before I do I'd",
"can start another one, but before I do I'd like to know how",
"the build plate had slipped. I'm using a Raise 3D N2 Plus printer,",
"had come off of the heated surface, remaining clipped to the top and",
"plate clips to come free? Is there anything I can do about it?",
"ones at the back, and two standard binder clips at the front, which",
"it, attached via 4 clips: two stationary ones at the back, and two",
"I'd really prefer not to ruin more builds if I can help it...",
"The left-side clip had come off of the heated surface, remaining clipped to",
"home from work and found the build ruined because the build plate had",
"come off of the heated surface, remaining clipped to the top and bottom",
"glass build plate that comes with it, attached via 4 clips: two stationary",
"the edges help? I'd really prefer not to ruin more builds if I",
"plate that comes with it, attached via 4 clips: two stationary ones at",
"I immediately canceled the build, and I can start another one, but before",
"two standard binder clips at the front, which shipped with the printer, which",
"front, which shipped with the printer, which hold the glass build plate plate",
"whole thing slipped an inch or so. I immediately canceled the build, and",
"more clips around the edges help? I'd really prefer not to ruin more",
"stationary ones at the back, and two standard binder clips at the front,",
"via 4 clips: two stationary ones at the back, and two standard binder",
"heated surface, remaining clipped to the top and bottom of the glass plate,",
"what I can do to prevent it from happening again. What typically causes",
"that comes with it, attached via 4 clips: two stationary ones at the",
"build ruined because the build plate had slipped. I'm using a Raise 3D",
"so. I immediately canceled the build, and I can start another one, but",
"clips: two stationary ones at the back, and two standard binder clips at",
"I'd like to know how this happened and what I can do to",
"top and bottom of the glass plate, and the whole thing slipped an",
"slipped an inch or so. I immediately canceled the build, and I can",
"the heated surface beneath. The left-side clip had come off of the heated",
"surface, remaining clipped to the top and bottom of the glass plate, and",
"build plate plate to the heated surface beneath. The left-side clip had come",
"ruined because the build plate had slipped. I'm using a Raise 3D N2",
"I can start another one, but before I do I'd like to know",
"the top and bottom of the glass plate, and the whole thing slipped",
"a Raise 3D N2 Plus printer, with the standard glass build plate that",
"remaining clipped to the top and bottom of the glass plate, and the",
"and bottom of the glass plate, and the whole thing slipped an inch",
"left-side clip had come off of the heated surface, remaining clipped to the",
"bottom of the glass plate, and the whole thing slipped an inch or",
"Plus printer, with the standard glass build plate that comes with it, attached",
"heated surface beneath. The left-side clip had come off of the heated surface,",
"build plate that comes with it, attached via 4 clips: two stationary ones",
"do to prevent it from happening again. What typically causes the plate clips",
"to come free? Is there anything I can do about it? Will adding",
"to the heated surface beneath. The left-side clip had come off of the",
"thing slipped an inch or so. I immediately canceled the build, and I",
"because the build plate had slipped. I'm using a Raise 3D N2 Plus",
"the whole thing slipped an inch or so. I immediately canceled the build,",
"an inch or so. I immediately canceled the build, and I can start",
"clip had come off of the heated surface, remaining clipped to the top",
"canceled the build, and I can start another one, but before I do",
"to prevent it from happening again. What typically causes the plate clips to",
"start another one, but before I do I'd like to know how this",
"attached via 4 clips: two stationary ones at the back, and two standard",
"Will adding more clips around the edges help? I'd really prefer not to",
"of the heated surface, remaining clipped to the top and bottom of the",
"and what I can do to prevent it from happening again. What typically",
"clipped to the top and bottom of the glass plate, and the whole",
"N2 Plus printer, with the standard glass build plate that comes with it,",
"about it? Will adding more clips around the edges help? I'd really prefer",
"another one, but before I do I'd like to know how this happened",
"the glass build plate plate to the heated surface beneath. The left-side clip",
"with the standard glass build plate that comes with it, attached via 4",
"help? I'd really prefer not to ruin more builds if I can help",
"from happening again. What typically causes the plate clips to come free? Is",
"causes the plate clips to come free? Is there anything I can do",
"how this happened and what I can do to prevent it from happening",
"the glass plate, and the whole thing slipped an inch or so. I",
"it from happening again. What typically causes the plate clips to come free?",
"plate, and the whole thing slipped an inch or so. I immediately canceled",
"standard glass build plate that comes with it, attached via 4 clips: two",
"this happened and what I can do to prevent it from happening again.",
"glass plate, and the whole thing slipped an inch or so. I immediately",
"the plate clips to come free? Is there anything I can do about",
"and found the build ruined because the build plate had slipped. I'm using",
"happened and what I can do to prevent it from happening again. What",
"the back, and two standard binder clips at the front, which shipped with",
"beneath. The left-side clip had come off of the heated surface, remaining clipped",
"to the top and bottom of the glass plate, and the whole thing",
"come free? Is there anything I can do about it? Will adding more",
"the build ruined because the build plate had slipped. I'm using a Raise",
"found the build ruined because the build plate had slipped. I'm using a",
"and I can start another one, but before I do I'd like to",
"to know how this happened and what I can do to prevent it",
"it? Will adding more clips around the edges help? I'd really prefer not",
"using a Raise 3D N2 Plus printer, with the standard glass build plate",
"clips at the front, which shipped with the printer, which hold the glass",
"build, I came home from work and found the build ruined because the",
"off of the heated surface, remaining clipped to the top and bottom of",
"which hold the glass build plate plate to the heated surface beneath. The",
"hold the glass build plate plate to the heated surface beneath. The left-side",
"I'm using a Raise 3D N2 Plus printer, with the standard glass build",
"like to know how this happened and what I can do to prevent",
"into a 5-day build, I came home from work and found the build",
"typically causes the plate clips to come free? Is there anything I can",
"a 5-day build, I came home from work and found the build ruined",
"around the edges help? I'd really prefer not to ruin more builds if",
"3D N2 Plus printer, with the standard glass build plate that comes with",
"again. What typically causes the plate clips to come free? Is there anything",
"adding more clips around the edges help? I'd really prefer not to ruin",
"printer, with the standard glass build plate that comes with it, attached via",
"there anything I can do about it? Will adding more clips around the",
"shipped with the printer, which hold the glass build plate plate to the",
"inch or so. I immediately canceled the build, and I can start another",
"clips to come free? Is there anything I can do about it? Will",
"can do about it? Will adding more clips around the edges help? I'd",
"from work and found the build ruined because the build plate had slipped.",
"came home from work and found the build ruined because the build plate",
"back, and two standard binder clips at the front, which shipped with the",
"glass build plate plate to the heated surface beneath. The left-side clip had",
"work and found the build ruined because the build plate had slipped. I'm",
"and the whole thing slipped an inch or so. I immediately canceled the",
"Is there anything I can do about it? Will adding more clips around",
"What typically causes the plate clips to come free? Is there anything I",
"with the printer, which hold the glass build plate plate to the heated",
"I can do about it? Will adding more clips around the edges help?",
"do I'd like to know how this happened and what I can do",
"with it, attached via 4 clips: two stationary ones at the back, and",
"Raise 3D N2 Plus printer, with the standard glass build plate that comes",
"do about it? Will adding more clips around the edges help? I'd really"
] |
[
"stepper. There's a blue light glowing inside BLTouch, which turns off if I",
"pull up settings of end stop? I cuurently have: * Marlin 1.1.6 *",
"videos about older firmware version. I followed [this document](https://docs.wixstatic.com/ugd/f5a1c8_77c6538efc934dbeab2f6e06e175ec35.pdf). To avoid causing any",
"to Z-min and servo 1. All other axes are not connected. X-min and",
"NC configuration). After updating the firmware, I can move the X and Y",
"configured BLTouch with Marlin firmware? I could only find videos about older firmware",
"BLTouch with Marlin firmware? I could only find videos about older firmware version.",
"Marlin 1.1.6 * BLTouch Classic Here's my [configuration](https://drive.google.com/open?id=1hX5qZ3nnSY7cxfvX1J8z8wPrAGqynfKL) file [](https://i.stack.imgur.com/NIoLA.png)",
"servo 1. All other axes are not connected. X-min and Y-min end stops",
"are open. Do I have to change pull up settings of end stop?",
"I could only find videos about older firmware version. I followed [this document](https://docs.wixstatic.com/ugd/f5a1c8_77c6538efc934dbeab2f6e06e175ec35.pdf).",
"to change pull up settings of end stop? I cuurently have: * Marlin",
"shorted using jumper (Mine is NC configuration). After updating the firmware, I can",
"BLTouch, which turns off if I remove Servo connections. The `M119` command shows",
"which turns off if I remove Servo connections. The `M119` command shows all",
"all end stops are open. Do I have to change pull up settings",
"printer, I removed all connections, took the board out and connected a stepper",
"I have to change pull up settings of end stop? I cuurently have:",
"removed all connections, took the board out and connected a stepper to Z-axis",
"only find videos about older firmware version. I followed [this document](https://docs.wixstatic.com/ugd/f5a1c8_77c6538efc934dbeab2f6e06e175ec35.pdf). To avoid",
"anyone configured BLTouch with Marlin firmware? I could only find videos about older",
"were shorted using jumper (Mine is NC configuration). After updating the firmware, I",
"configuration). After updating the firmware, I can move the X and Y steppers,",
"X and Y steppers, but not Z stepper. There's a blue light glowing",
"any damage to the printer, I removed all connections, took the board out",
"`M119` command shows all end stops are open. Do I have to change",
"settings of end stop? I cuurently have: * Marlin 1.1.6 * BLTouch Classic",
"a stepper to Z-axis terminal and BLTouch to Z-min and servo 1. All",
"causing any damage to the printer, I removed all connections, took the board",
"jumper (Mine is NC configuration). After updating the firmware, I can move the",
"stop? I cuurently have: * Marlin 1.1.6 * BLTouch Classic Here's my [configuration](https://drive.google.com/open?id=1hX5qZ3nnSY7cxfvX1J8z8wPrAGqynfKL)",
"a blue light glowing inside BLTouch, which turns off if I remove Servo",
"I can move the X and Y steppers, but not Z stepper. There's",
"light glowing inside BLTouch, which turns off if I remove Servo connections. The",
"Z-axis terminal and BLTouch to Z-min and servo 1. All other axes are",
"could only find videos about older firmware version. I followed [this document](https://docs.wixstatic.com/ugd/f5a1c8_77c6538efc934dbeab2f6e06e175ec35.pdf). To",
"end stops were shorted using jumper (Mine is NC configuration). After updating the",
"1. All other axes are not connected. X-min and Y-min end stops were",
"move the X and Y steppers, but not Z stepper. There's a blue",
"have to change pull up settings of end stop? I cuurently have: *",
"document](https://docs.wixstatic.com/ugd/f5a1c8_77c6538efc934dbeab2f6e06e175ec35.pdf). To avoid causing any damage to the printer, I removed all connections,",
"but not Z stepper. There's a blue light glowing inside BLTouch, which turns",
"the printer, I removed all connections, took the board out and connected a",
"Z-min and servo 1. All other axes are not connected. X-min and Y-min",
"inside BLTouch, which turns off if I remove Servo connections. The `M119` command",
"Z stepper. There's a blue light glowing inside BLTouch, which turns off if",
"and BLTouch to Z-min and servo 1. All other axes are not connected.",
"(Mine is NC configuration). After updating the firmware, I can move the X",
"BLTouch to Z-min and servo 1. All other axes are not connected. X-min",
"can move the X and Y steppers, but not Z stepper. There's a",
"find videos about older firmware version. I followed [this document](https://docs.wixstatic.com/ugd/f5a1c8_77c6538efc934dbeab2f6e06e175ec35.pdf). To avoid causing",
"connected. X-min and Y-min end stops were shorted using jumper (Mine is NC",
"if I remove Servo connections. The `M119` command shows all end stops are",
"the X and Y steppers, but not Z stepper. There's a blue light",
"firmware version. I followed [this document](https://docs.wixstatic.com/ugd/f5a1c8_77c6538efc934dbeab2f6e06e175ec35.pdf). To avoid causing any damage to the",
"I followed [this document](https://docs.wixstatic.com/ugd/f5a1c8_77c6538efc934dbeab2f6e06e175ec35.pdf). To avoid causing any damage to the printer, I",
"are not connected. X-min and Y-min end stops were shorted using jumper (Mine",
"glowing inside BLTouch, which turns off if I remove Servo connections. The `M119`",
"connected a stepper to Z-axis terminal and BLTouch to Z-min and servo 1.",
"and Y steppers, but not Z stepper. There's a blue light glowing inside",
"terminal and BLTouch to Z-min and servo 1. All other axes are not",
"have: * Marlin 1.1.6 * BLTouch Classic Here's my [configuration](https://drive.google.com/open?id=1hX5qZ3nnSY7cxfvX1J8z8wPrAGqynfKL) file [. To avoid causing any damage to the printer, I removed all",
"of end stop? I cuurently have: * Marlin 1.1.6 * BLTouch Classic Here's",
"* Marlin 1.1.6 * BLTouch Classic Here's my [configuration](https://drive.google.com/open?id=1hX5qZ3nnSY7cxfvX1J8z8wPrAGqynfKL) file [. To avoid causing any damage to",
"To avoid causing any damage to the printer, I removed all connections, took",
"not connected. X-min and Y-min end stops were shorted using jumper (Mine is",
"all connections, took the board out and connected a stepper to Z-axis terminal",
"stops are open. Do I have to change pull up settings of end",
"I remove Servo connections. The `M119` command shows all end stops are open.",
"about older firmware version. I followed [this document](https://docs.wixstatic.com/ugd/f5a1c8_77c6538efc934dbeab2f6e06e175ec35.pdf). To avoid causing any damage",
"turns off if I remove Servo connections. The `M119` command shows all end",
"and connected a stepper to Z-axis terminal and BLTouch to Z-min and servo",
"Y-min end stops were shorted using jumper (Mine is NC configuration). After updating",
"not Z stepper. There's a blue light glowing inside BLTouch, which turns off",
"blue light glowing inside BLTouch, which turns off if I remove Servo connections.",
"After updating the firmware, I can move the X and Y steppers, but",
"is NC configuration). After updating the firmware, I can move the X and",
"end stops are open. Do I have to change pull up settings of",
"updating the firmware, I can move the X and Y steppers, but not",
"the firmware, I can move the X and Y steppers, but not Z",
"up settings of end stop? I cuurently have: * Marlin 1.1.6 * BLTouch",
"other axes are not connected. X-min and Y-min end stops were shorted using",
"with Marlin firmware? I could only find videos about older firmware version. I",
"damage to the printer, I removed all connections, took the board out and",
"connections, took the board out and connected a stepper to Z-axis terminal and",
"change pull up settings of end stop? I cuurently have: * Marlin 1.1.6",
"remove Servo connections. The `M119` command shows all end stops are open. Do",
"out and connected a stepper to Z-axis terminal and BLTouch to Z-min and",
"cuurently have: * Marlin 1.1.6 * BLTouch Classic Here's my [configuration](https://drive.google.com/open?id=1hX5qZ3nnSY7cxfvX1J8z8wPrAGqynfKL) file [ file",
"followed [this document](https://docs.wixstatic.com/ugd/f5a1c8_77c6538efc934dbeab2f6e06e175ec35.pdf). To avoid causing any damage to the printer, I removed",
"X-min and Y-min end stops were shorted using jumper (Mine is NC configuration).",
"I removed all connections, took the board out and connected a stepper to",
"The `M119` command shows all end stops are open. Do I have to",
"to Z-axis terminal and BLTouch to Z-min and servo 1. All other axes",
"the board out and connected a stepper to Z-axis terminal and BLTouch to",
"stops were shorted using jumper (Mine is NC configuration). After updating the firmware,",
"steppers, but not Z stepper. There's a blue light glowing inside BLTouch, which",
"Servo connections. The `M119` command shows all end stops are open. Do I",
"command shows all end stops are open. Do I have to change pull",
"Has anyone configured BLTouch with Marlin firmware? I could only find videos about",
"and servo 1. All other axes are not connected. X-min and Y-min end",
"connections. The `M119` command shows all end stops are open. Do I have",
"version. I followed [this document](https://docs.wixstatic.com/ugd/f5a1c8_77c6538efc934dbeab2f6e06e175ec35.pdf). To avoid causing any damage to the printer,",
"avoid causing any damage to the printer, I removed all connections, took the",
"All other axes are not connected. X-min and Y-min end stops were shorted",
"firmware? I could only find videos about older firmware version. I followed [this",
"end stop? I cuurently have: * Marlin 1.1.6 * BLTouch Classic Here's my",
"Marlin firmware? I could only find videos about older firmware version. I followed",
"There's a blue light glowing inside BLTouch, which turns off if I remove",
"took the board out and connected a stepper to Z-axis terminal and BLTouch",
"stepper to Z-axis terminal and BLTouch to Z-min and servo 1. All other",
"Y steppers, but not Z stepper. There's a blue light glowing inside BLTouch,",
"Do I have to change pull up settings of end stop? I cuurently"
] |
[
"on a hot day. The part won't be exposed *directly* to the sun,",
"when in the sun, and potentially from the engine radiating heat through the",
"in the process of building my own head unit / stereo prototype for",
"°F), and my car might get up to 60 °C/150 °F on a",
"my part? If not, what material, if any, would be better suited for",
"cars getting up to 50-60 °C, sometimes even in only 20 °C weather",
"get up to 60 °C/150 °F on a hot day. The part won't",
"to heat both from the interior of the car when in the sun,",
"hot day. The part won't be exposed *directly* to the sun, but will",
"unit / stereo prototype for a car, which will have a 3D-printed enclosure.",
"car might get up to 60 °C/150 °F on a hot day. The",
"but will obviously be exposed to heat both from the interior of the",
"Some estimations put the interior of cars getting up to 50-60 °C, sometimes",
"for a car, which will have a 3D-printed enclosure. My concern is that",
"to the sun, but will obviously be exposed to heat both from the",
"from car to car. Should I be concerned using PLA for my part?",
"concerned using PLA for my part? If not, what material, if any, would",
"will obviously be exposed to heat both from the interior of the car",
"even in only 20 °C weather due to the 'greenhouse' effect created in",
"car, which will have a 3D-printed enclosure. My concern is that cars can",
"3D-printed enclosure. My concern is that cars can get quite hot in the",
"I be concerned using PLA for my part? If not, what material, if",
"process of building my own head unit / stereo prototype for a car,",
"be exposed *directly* to the sun, but will obviously be exposed to heat",
"I live in a fairly temperate climate, but the summers can still get",
"PLA for my part? If not, what material, if any, would be better",
"live in a fairly temperate climate, but the summers can still get up",
"stereo prototype for a car, which will have a 3D-printed enclosure. My concern",
"20-29 °C (80-85 °F), and my car might get up to 60 °C/150",
"of cars getting up to 50-60 °C, sometimes even in only 20 °C",
"radiating heat through the firewall, though the latter factor will differ from car",
"still get up to 20-29 °C (80-85 °F), and my car might get",
"through the firewall, though the latter factor will differ from car to car.",
"might get up to 60 °C/150 °F on a hot day. The part",
"If not, what material, if any, would be better suited for these possible",
"estimations put the interior of cars getting up to 50-60 °C, sometimes even",
"a fairly temperate climate, but the summers can still get up to 20-29",
"getting up to 50-60 °C, sometimes even in only 20 °C weather due",
"weather due to the 'greenhouse' effect created in the car. I live in",
"exposed to heat both from the interior of the car when in the",
"the latter factor will differ from car to car. Should I be concerned",
"interior of the car when in the sun, and potentially from the engine",
"have a 3D-printed enclosure. My concern is that cars can get quite hot",
"to the 'greenhouse' effect created in the car. I live in a fairly",
"the sun, and even more so if you live in hot climates. Some",
"to car. Should I be concerned using PLA for my part? If not,",
"will have a 3D-printed enclosure. My concern is that cars can get quite",
"in the sun, and even more so if you live in hot climates.",
"sometimes even in only 20 °C weather due to the 'greenhouse' effect created",
"a car, which will have a 3D-printed enclosure. My concern is that cars",
"car. I live in a fairly temperate climate, but the summers can still",
"exposed *directly* to the sun, but will obviously be exposed to heat both",
"part won't be exposed *directly* to the sun, but will obviously be exposed",
"part? If not, what material, if any, would be better suited for these",
"get quite hot in the sun, and even more so if you live",
"what material, if any, would be better suited for these possible temperatures (other",
"put the interior of cars getting up to 50-60 °C, sometimes even in",
"to 20-29 °C (80-85 °F), and my car might get up to 60",
"even more so if you live in hot climates. Some estimations put the",
"a hot day. The part won't be exposed *directly* to the sun, but",
"summers can still get up to 20-29 °C (80-85 °F), and my car",
"only 20 °C weather due to the 'greenhouse' effect created in the car.",
"created in the car. I live in a fairly temperate climate, but the",
"a 3D-printed enclosure. My concern is that cars can get quite hot in",
"fairly temperate climate, but the summers can still get up to 20-29 °C",
"and my car might get up to 60 °C/150 °F on a hot",
"effect created in the car. I live in a fairly temperate climate, but",
"the process of building my own head unit / stereo prototype for a",
"the summers can still get up to 20-29 °C (80-85 °F), and my",
"both from the interior of the car when in the sun, and potentially",
"temperate climate, but the summers can still get up to 20-29 °C (80-85",
"building my own head unit / stereo prototype for a car, which will",
"own head unit / stereo prototype for a car, which will have a",
"car when in the sun, and potentially from the engine radiating heat through",
"Should I be concerned using PLA for my part? If not, what material,",
"won't be exposed *directly* to the sun, but will obviously be exposed to",
"potentially from the engine radiating heat through the firewall, though the latter factor",
"climates. Some estimations put the interior of cars getting up to 50-60 °C,",
"'greenhouse' effect created in the car. I live in a fairly temperate climate,",
"The part won't be exposed *directly* to the sun, but will obviously be",
"/ stereo prototype for a car, which will have a 3D-printed enclosure. My",
"in hot climates. Some estimations put the interior of cars getting up to",
"live in hot climates. Some estimations put the interior of cars getting up",
"due to the 'greenhouse' effect created in the car. I live in a",
"heat both from the interior of the car when in the sun, and",
"up to 50-60 °C, sometimes even in only 20 °C weather due to",
"cars can get quite hot in the sun, and even more so if",
"the sun, but will obviously be exposed to heat both from the interior",
"latter factor will differ from car to car. Should I be concerned using",
"in the car. I live in a fairly temperate climate, but the summers",
"from the interior of the car when in the sun, and potentially from",
"be concerned using PLA for my part? If not, what material, if any,",
"up to 20-29 °C (80-85 °F), and my car might get up to",
"head unit / stereo prototype for a car, which will have a 3D-printed",
"engine radiating heat through the firewall, though the latter factor will differ from",
"the sun, and potentially from the engine radiating heat through the firewall, though",
"which will have a 3D-printed enclosure. My concern is that cars can get",
"of building my own head unit / stereo prototype for a car, which",
"prototype for a car, which will have a 3D-printed enclosure. My concern is",
"up to 60 °C/150 °F on a hot day. The part won't be",
"concern is that cars can get quite hot in the sun, and even",
"My concern is that cars can get quite hot in the sun, and",
"(80-85 °F), and my car might get up to 60 °C/150 °F on",
"in the sun, and potentially from the engine radiating heat through the firewall,",
"car to car. Should I be concerned using PLA for my part? If",
"differ from car to car. Should I be concerned using PLA for my",
"so if you live in hot climates. Some estimations put the interior of",
"obviously be exposed to heat both from the interior of the car when",
"of the car when in the sun, and potentially from the engine radiating",
"not, what material, if any, would be better suited for these possible temperatures",
"to 60 °C/150 °F on a hot day. The part won't be exposed",
"°C/150 °F on a hot day. The part won't be exposed *directly* to",
"can still get up to 20-29 °C (80-85 °F), and my car might",
"°C weather due to the 'greenhouse' effect created in the car. I live",
"hot climates. Some estimations put the interior of cars getting up to 50-60",
"*directly* to the sun, but will obviously be exposed to heat both from",
"my own head unit / stereo prototype for a car, which will have",
"the firewall, though the latter factor will differ from car to car. Should",
"climate, but the summers can still get up to 20-29 °C (80-85 °F),",
"to 50-60 °C, sometimes even in only 20 °C weather due to the",
"material, if any, would be better suited for these possible temperatures (other than",
"and potentially from the engine radiating heat through the firewall, though the latter",
"get up to 20-29 °C (80-85 °F), and my car might get up",
"the car. I live in a fairly temperate climate, but the summers can",
"the car when in the sun, and potentially from the engine radiating heat",
"using PLA for my part? If not, what material, if any, would be",
"be exposed to heat both from the interior of the car when in",
"you live in hot climates. Some estimations put the interior of cars getting",
"°C, sometimes even in only 20 °C weather due to the 'greenhouse' effect",
"my car might get up to 60 °C/150 °F on a hot day.",
"50-60 °C, sometimes even in only 20 °C weather due to the 'greenhouse'",
"heat through the firewall, though the latter factor will differ from car to",
"can get quite hot in the sun, and even more so if you",
"firewall, though the latter factor will differ from car to car. Should I",
"sun, and even more so if you live in hot climates. Some estimations",
"will differ from car to car. Should I be concerned using PLA for",
"hot in the sun, and even more so if you live in hot",
"from the engine radiating heat through the firewall, though the latter factor will",
"car. Should I be concerned using PLA for my part? If not, what",
"I'm in the process of building my own head unit / stereo prototype",
"more so if you live in hot climates. Some estimations put the interior",
"20 °C weather due to the 'greenhouse' effect created in the car. I",
"though the latter factor will differ from car to car. Should I be",
"factor will differ from car to car. Should I be concerned using PLA",
"the 'greenhouse' effect created in the car. I live in a fairly temperate",
"sun, and potentially from the engine radiating heat through the firewall, though the",
"in only 20 °C weather due to the 'greenhouse' effect created in the",
"day. The part won't be exposed *directly* to the sun, but will obviously",
"and even more so if you live in hot climates. Some estimations put",
"that cars can get quite hot in the sun, and even more so",
"if you live in hot climates. Some estimations put the interior of cars",
"sun, but will obviously be exposed to heat both from the interior of",
"for my part? If not, what material, if any, would be better suited",
"but the summers can still get up to 20-29 °C (80-85 °F), and",
"is that cars can get quite hot in the sun, and even more",
"interior of cars getting up to 50-60 °C, sometimes even in only 20",
"in a fairly temperate climate, but the summers can still get up to",
"°F on a hot day. The part won't be exposed *directly* to the",
"the engine radiating heat through the firewall, though the latter factor will differ",
"enclosure. My concern is that cars can get quite hot in the sun,",
"60 °C/150 °F on a hot day. The part won't be exposed *directly*",
"if any, would be better suited for these possible temperatures (other than metal)?",
"the interior of the car when in the sun, and potentially from the",
"quite hot in the sun, and even more so if you live in",
"the interior of cars getting up to 50-60 °C, sometimes even in only",
"°C (80-85 °F), and my car might get up to 60 °C/150 °F"
] |
[
"test is a 20 mm hollow cube from Thingiverse that I have used",
"filament too. I am not sure that this is a clogging problem since",
"cube from Thingiverse that I have used for the previous filament too. I",
"a 20 mm hollow cube from Thingiverse that I have used for the",
"filament came out of the extruder. What can be the reason and how",
"I changed the filament (PLA) in my Wanhao Duplicator I3+. I ended the",
"with no problems. It just stopped after 25%. When I started another print",
"from Vertex, grey. The object that I use to test is a 20",
"instead of 190°C). Now the print started without a problem but after about",
"a problem but after about 25% no more filament came out of the",
"a clogging problem since the print starts with no problems. It just stopped",
"too. I am not sure that this is a clogging problem since the",
"can I resolve it? The filament is from Vertex, grey. The object that",
"after 25%. When I started another print I was able to finish by",
"starts with no problems. It just stopped after 25%. When I started another",
"the filament (PLA) in my Wanhao Duplicator I3+. I ended the first try",
"problem but after about 25% no more filament came out of the extruder.",
"Thingiverse that I have used for the previous filament too. I am not",
"I re-sliced with a higher temperature (195°C instead of 190°C). Now the print",
"print when I saw that the 'lines' were too thin. I re-sliced with",
"temperature (195°C instead of 190°C). Now the print started without a problem but",
"I started another print I was able to finish by increasing the temperature.",
"25%. When I started another print I was able to finish by increasing",
"am not sure that this is a clogging problem since the print starts",
"I3+. I ended the first try to print when I saw that the",
"started without a problem but after about 25% no more filament came out",
"without a problem but after about 25% no more filament came out of",
"came out of the extruder. What can be the reason and how can",
"the extruder. What can be the reason and how can I resolve it?",
"no more filament came out of the extruder. What can be the reason",
"that I have used for the previous filament too. I am not sure",
"for the previous filament too. I am not sure that this is a",
"my Wanhao Duplicator I3+. I ended the first try to print when I",
"of the extruder. What can be the reason and how can I resolve",
"print starts with no problems. It just stopped after 25%. When I started",
"the first try to print when I saw that the 'lines' were too",
"were too thin. I re-sliced with a higher temperature (195°C instead of 190°C).",
"The object that I use to test is a 20 mm hollow cube",
"no problems. It just stopped after 25%. When I started another print I",
"resolve it? The filament is from Vertex, grey. The object that I use",
"What can be the reason and how can I resolve it? The filament",
"have used for the previous filament too. I am not sure that this",
"It just stopped after 25%. When I started another print I was able",
"filament (PLA) in my Wanhao Duplicator I3+. I ended the first try to",
"this is a clogging problem since the print starts with no problems. It",
"ended the first try to print when I saw that the 'lines' were",
"25% no more filament came out of the extruder. What can be the",
"filament is from Vertex, grey. The object that I use to test is",
"it? The filament is from Vertex, grey. The object that I use to",
"grey. The object that I use to test is a 20 mm hollow",
"I use to test is a 20 mm hollow cube from Thingiverse that",
"hollow cube from Thingiverse that I have used for the previous filament too.",
"a higher temperature (195°C instead of 190°C). Now the print started without a",
"Vertex, grey. The object that I use to test is a 20 mm",
"problems. It just stopped after 25%. When I started another print I was",
"object that I use to test is a 20 mm hollow cube from",
"of 190°C). Now the print started without a problem but after about 25%",
"but after about 25% no more filament came out of the extruder. What",
"I resolve it? The filament is from Vertex, grey. The object that I",
"about 25% no more filament came out of the extruder. What can be",
"is a clogging problem since the print starts with no problems. It just",
"since the print starts with no problems. It just stopped after 25%. When",
"higher temperature (195°C instead of 190°C). Now the print started without a problem",
"out of the extruder. What can be the reason and how can I",
"stopped after 25%. When I started another print I was able to finish",
"used for the previous filament too. I am not sure that this is",
"is a 20 mm hollow cube from Thingiverse that I have used for",
"problem since the print starts with no problems. It just stopped after 25%.",
"is from Vertex, grey. The object that I use to test is a",
"When I started another print I was able to finish by increasing the",
"how can I resolve it? The filament is from Vertex, grey. The object",
"that I use to test is a 20 mm hollow cube from Thingiverse",
"extruder. What can be the reason and how can I resolve it? The",
"20 mm hollow cube from Thingiverse that I have used for the previous",
"the reason and how can I resolve it? The filament is from Vertex,",
"and how can I resolve it? The filament is from Vertex, grey. The",
"clogging problem since the print starts with no problems. It just stopped after",
"changed the filament (PLA) in my Wanhao Duplicator I3+. I ended the first",
"that the 'lines' were too thin. I re-sliced with a higher temperature (195°C",
"I ended the first try to print when I saw that the 'lines'",
"(PLA) in my Wanhao Duplicator I3+. I ended the first try to print",
"The filament is from Vertex, grey. The object that I use to test",
"I have used for the previous filament too. I am not sure that",
"I am not sure that this is a clogging problem since the print",
"the print starts with no problems. It just stopped after 25%. When I",
"Wanhao Duplicator I3+. I ended the first try to print when I saw",
"thin. I re-sliced with a higher temperature (195°C instead of 190°C). Now the",
"'lines' were too thin. I re-sliced with a higher temperature (195°C instead of",
"190°C). Now the print started without a problem but after about 25% no",
"not sure that this is a clogging problem since the print starts with",
"the print started without a problem but after about 25% no more filament",
"use to test is a 20 mm hollow cube from Thingiverse that I",
"the 'lines' were too thin. I re-sliced with a higher temperature (195°C instead",
"mm hollow cube from Thingiverse that I have used for the previous filament",
"more filament came out of the extruder. What can be the reason and",
"just stopped after 25%. When I started another print I was able to",
"re-sliced with a higher temperature (195°C instead of 190°C). Now the print started",
"when I saw that the 'lines' were too thin. I re-sliced with a",
"that this is a clogging problem since the print starts with no problems.",
"previous filament too. I am not sure that this is a clogging problem",
"to print when I saw that the 'lines' were too thin. I re-sliced",
"(195°C instead of 190°C). Now the print started without a problem but after",
"to test is a 20 mm hollow cube from Thingiverse that I have",
"print started without a problem but after about 25% no more filament came",
"sure that this is a clogging problem since the print starts with no",
"Now the print started without a problem but after about 25% no more",
"Duplicator I3+. I ended the first try to print when I saw that",
"in my Wanhao Duplicator I3+. I ended the first try to print when",
"from Thingiverse that I have used for the previous filament too. I am",
"first try to print when I saw that the 'lines' were too thin.",
"saw that the 'lines' were too thin. I re-sliced with a higher temperature",
"too thin. I re-sliced with a higher temperature (195°C instead of 190°C). Now",
"try to print when I saw that the 'lines' were too thin. I",
"after about 25% no more filament came out of the extruder. What can",
"be the reason and how can I resolve it? The filament is from",
"the previous filament too. I am not sure that this is a clogging",
"I saw that the 'lines' were too thin. I re-sliced with a higher",
"can be the reason and how can I resolve it? The filament is",
"with a higher temperature (195°C instead of 190°C). Now the print started without",
"reason and how can I resolve it? The filament is from Vertex, grey."
] |
[
"the plate, and the result is very disgusting. It is the same with",
"Cura and I've reset it several times, using the defaults options or not.",
"prints (normal cube): [example 1](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835338/Snapchat-1209640225.jpg) [![First example of poorly printed cube](https://i.stack.imgur.com/rSqA2.jpg \"First example",
"cube): [example 1](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835338/Snapchat-1209640225.jpg) [![First example of poorly printed cube](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly",
"2](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835340/Snapchat-27434386.jpg) [![Second example of poorly printed cube](https://i.stack.imgur.com/hb1dJ.jpg \"Second example of poorly printed cube\")](https://i.stack.imgur.com/hb1dJ.jpg",
"high or low temperature, at 5 mm above the plate, and the result",
"a pretty Anycubic Mega I3 and it was very cool to own it.",
"cube](https://i.stack.imgur.com/hb1dJ.jpg \"Second example of poorly printed cube\")](https://i.stack.imgur.com/hb1dJ.jpg \"Second example of poorly printed cube\")",
"other PLA from ICE-Filaments but I can't do anything. I use Cura and",
"example of poorly printed cube\") and [Example 2](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835340/Snapchat-27434386.jpg) [ [![First example of poorly printed cube](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly printed",
"cube\") and [Example 2](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835340/Snapchat-27434386.jpg) [![Second example of poorly printed cube](https://i.stack.imgur.com/hb1dJ.jpg \"Second example of",
"the owner of a pretty Anycubic Mega I3 and it was very cool",
"now I have several problems when printing with it. It clicks all along,",
"cube](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly printed cube\")](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly printed cube\")",
"1](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835338/Snapchat-1209640225.jpg) [![First example of poorly printed cube](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly printed cube\")](https://i.stack.imgur.com/rSqA2.jpg",
"and [Example 2](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835340/Snapchat-27434386.jpg) [![Second example of poorly printed cube](https://i.stack.imgur.com/hb1dJ.jpg \"Second example of poorly",
"basic black PLA, or with other PLA from ICE-Filaments but I can't do",
"example of poorly printed cube](https://i.stack.imgur.com/hb1dJ.jpg \"Second example of poorly printed cube\")](https://i.stack.imgur.com/hb1dJ.jpg \"Second example",
"several problems when printing with it. It clicks all along, at high or",
"PLA, or with other PLA from ICE-Filaments but I can't do anything. I",
"but I can't do anything. I use Cura and I've reset it several",
"can't do anything. I use Cura and I've reset it several times, using",
"are two examples of some prints (normal cube): [example 1](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835338/Snapchat-1209640225.jpg) [![First example of",
"the basic black PLA, or with other PLA from ICE-Filaments but I can't",
"cube\")](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly printed cube\") and [Example 2](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835340/Snapchat-27434386.jpg) [![Second example of",
"printed cube\")](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly printed cube\") and [Example 2](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835340/Snapchat-27434386.jpg) [ [![First",
"However, now I have several problems when printing with it. It clicks all",
"was very cool to own it. However, now I have several problems when",
"of a pretty Anycubic Mega I3 and it was very cool to own",
"pretty Anycubic Mega I3 and it was very cool to own it. However,",
"printed cube](https://i.stack.imgur.com/hb1dJ.jpg \"Second example of poorly printed cube\")](https://i.stack.imgur.com/hb1dJ.jpg \"Second example of poorly printed",
"it several times, using the defaults options or not. Here are two examples",
"printing with it. It clicks all along, at high or low temperature, at",
"Anycubic Mega I3 and it was very cool to own it. However, now",
"plate, and the result is very disgusting. It is the same with the",
"printed cube\") and [Example 2](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835340/Snapchat-27434386.jpg) [![Second example of poorly printed cube](https://i.stack.imgur.com/hb1dJ.jpg \"Second example",
"use Cura and I've reset it several times, using the defaults options or",
"it. It clicks all along, at high or low temperature, at 5 mm",
"Mega I3 and it was very cool to own it. However, now I",
"it was very cool to own it. However, now I have several problems",
"I can't do anything. I use Cura and I've reset it several times,",
"some prints (normal cube): [example 1](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835338/Snapchat-1209640225.jpg) [![First example of poorly printed cube](https://i.stack.imgur.com/rSqA2.jpg \"First",
"is very disgusting. It is the same with the basic black PLA, or",
"with the basic black PLA, or with other PLA from ICE-Filaments but I",
"disgusting. It is the same with the basic black PLA, or with other",
"example of poorly printed cube\")](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly printed cube\") and [Example",
"poorly printed cube\") and [Example 2](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835340/Snapchat-27434386.jpg) [![Second example of poorly printed cube](https://i.stack.imgur.com/hb1dJ.jpg \"Second",
"printed cube](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly printed cube\")](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly printed",
"own it. However, now I have several problems when printing with it. It",
"of poorly printed cube\")](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly printed cube\") and [Example 2](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835340/Snapchat-27434386.jpg)",
"to own it. However, now I have several problems when printing with it.",
"temperature, at 5 mm above the plate, and the result is very disgusting.",
"the defaults options or not. Here are two examples of some prints (normal",
"and I've reset it several times, using the defaults options or not. Here",
"(normal cube): [example 1](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835338/Snapchat-1209640225.jpg) [![First example of poorly printed cube](https://i.stack.imgur.com/rSqA2.jpg \"First example of",
"or low temperature, at 5 mm above the plate, and the result is",
"options or not. Here are two examples of some prints (normal cube): [example",
"or not. Here are two examples of some prints (normal cube): [example 1](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835338/Snapchat-1209640225.jpg)",
"poorly printed cube](https://i.stack.imgur.com/hb1dJ.jpg \"Second example of poorly printed cube\")](https://i.stack.imgur.com/hb1dJ.jpg \"Second example of poorly",
"problems when printing with it. It clicks all along, at high or low",
"ICE-Filaments but I can't do anything. I use Cura and I've reset it",
"PLA from ICE-Filaments but I can't do anything. I use Cura and I've",
"several times, using the defaults options or not. Here are two examples of",
"with it. It clicks all along, at high or low temperature, at 5",
"at 5 mm above the plate, and the result is very disgusting. It",
"and it was very cool to own it. However, now I have several",
"poorly printed cube](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly printed cube\")](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly",
"example of poorly printed cube](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly printed cube\")](https://i.stack.imgur.com/rSqA2.jpg \"First example",
"along, at high or low temperature, at 5 mm above the plate, and",
"anything. I use Cura and I've reset it several times, using the defaults",
"very disgusting. It is the same with the basic black PLA, or with",
"[![Second example of poorly printed cube](https://i.stack.imgur.com/hb1dJ.jpg \"Second example of poorly printed cube\")](https://i.stack.imgur.com/hb1dJ.jpg \"Second",
"I have several problems when printing with it. It clicks all along, at",
"have several problems when printing with it. It clicks all along, at high",
"or with other PLA from ICE-Filaments but I can't do anything. I use",
"the result is very disgusting. It is the same with the basic black",
"examples of some prints (normal cube): [example 1](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835338/Snapchat-1209640225.jpg) [![First example of poorly printed",
"\"First example of poorly printed cube\")](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly printed cube\") and",
"I3 and it was very cool to own it. However, now I have",
"5 mm above the plate, and the result is very disgusting. It is",
"same with the basic black PLA, or with other PLA from ICE-Filaments but",
"of poorly printed cube](https://i.stack.imgur.com/hb1dJ.jpg \"Second example of poorly printed cube\")](https://i.stack.imgur.com/hb1dJ.jpg \"Second example of",
"above the plate, and the result is very disgusting. It is the same",
"owner of a pretty Anycubic Mega I3 and it was very cool to",
"reset it several times, using the defaults options or not. Here are two",
"of some prints (normal cube): [example 1](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835338/Snapchat-1209640225.jpg) [![First example of poorly printed cube](https://i.stack.imgur.com/rSqA2.jpg",
"of poorly printed cube\") and [Example 2](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835340/Snapchat-27434386.jpg) [![Second example of poorly printed cube](https://i.stack.imgur.com/hb1dJ.jpg",
"Here are two examples of some prints (normal cube): [example 1](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835338/Snapchat-1209640225.jpg) [![First example",
"poorly printed cube\")](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly printed cube\") and [Example 2](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835340/Snapchat-27434386.jpg) [![Second",
"very cool to own it. However, now I have several problems when printing",
"using the defaults options or not. Here are two examples of some prints",
"defaults options or not. Here are two examples of some prints (normal cube):",
"[![First example of poorly printed cube](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly printed cube\")](https://i.stack.imgur.com/rSqA2.jpg \"First",
"times, using the defaults options or not. Here are two examples of some",
"with other PLA from ICE-Filaments but I can't do anything. I use Cura",
"am the owner of a pretty Anycubic Mega I3 and it was very",
"it. However, now I have several problems when printing with it. It clicks",
"all along, at high or low temperature, at 5 mm above the plate,",
"It clicks all along, at high or low temperature, at 5 mm above",
"[Example 2](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835340/Snapchat-27434386.jpg) [![Second example of poorly printed cube](https://i.stack.imgur.com/hb1dJ.jpg \"Second example of poorly printed",
"I am the owner of a pretty Anycubic Mega I3 and it was",
"I use Cura and I've reset it several times, using the defaults options",
"do anything. I use Cura and I've reset it several times, using the",
"is the same with the basic black PLA, or with other PLA from",
"the same with the basic black PLA, or with other PLA from ICE-Filaments",
"mm above the plate, and the result is very disgusting. It is the",
"and the result is very disgusting. It is the same with the basic",
"of poorly printed cube](https://i.stack.imgur.com/rSqA2.jpg \"First example of poorly printed cube\")](https://i.stack.imgur.com/rSqA2.jpg \"First example of",
"cool to own it. However, now I have several problems when printing with",
"low temperature, at 5 mm above the plate, and the result is very",
"two examples of some prints (normal cube): [example 1](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835338/Snapchat-1209640225.jpg) [ [![Second example of poorly"
] |
[
"filament in the extruder for a prolonged period of time while the printer",
"Can I leave the filament in the extruder for a prolonged period of",
"the filament. Can I leave the filament in the extruder for a prolonged",
"quick question about the filament. Can I leave the filament in the extruder",
"Just one quick question about the filament. Can I leave the filament in",
"question about the filament. Can I leave the filament in the extruder for",
"I leave the filament in the extruder for a prolonged period of time",
"about the filament. Can I leave the filament in the extruder for a",
"the extruder for a prolonged period of time while the printer is off?",
"in the extruder for a prolonged period of time while the printer is",
"filament. Can I leave the filament in the extruder for a prolonged period",
"one quick question about the filament. Can I leave the filament in the",
"the filament in the extruder for a prolonged period of time while the",
"leave the filament in the extruder for a prolonged period of time while"
] |
[
"system and they work just fine. Could it be the board or what",
"not move. I tested the motor and cable on another system and they",
"on my Creality Ender-4 printer. I have heated the nozzle but the extruder",
"and they work just fine. Could it be the board or what could",
"I have heated the nozzle but the extruder does not move. I tested",
"they work just fine. Could it be the board or what could it",
"and cable on another system and they work just fine. Could it be",
"get my extruder to work on my Creality Ender-4 printer. I have heated",
"my Creality Ender-4 printer. I have heated the nozzle but the extruder does",
"heated the nozzle but the extruder does not move. I tested the motor",
"have heated the nozzle but the extruder does not move. I tested the",
"extruder to work on my Creality Ender-4 printer. I have heated the nozzle",
"cable on another system and they work just fine. Could it be the",
"the extruder does not move. I tested the motor and cable on another",
"tested the motor and cable on another system and they work just fine.",
"the motor and cable on another system and they work just fine. Could",
"I tested the motor and cable on another system and they work just",
"extruder does not move. I tested the motor and cable on another system",
"move. I tested the motor and cable on another system and they work",
"another system and they work just fine. Could it be the board or",
"on another system and they work just fine. Could it be the board",
"work on my Creality Ender-4 printer. I have heated the nozzle but the",
"Creality Ender-4 printer. I have heated the nozzle but the extruder does not",
"cannot get my extruder to work on my Creality Ender-4 printer. I have",
"printer. I have heated the nozzle but the extruder does not move. I",
"the nozzle but the extruder does not move. I tested the motor and",
"work just fine. Could it be the board or what could it be?",
"Ender-4 printer. I have heated the nozzle but the extruder does not move.",
"I cannot get my extruder to work on my Creality Ender-4 printer. I",
"nozzle but the extruder does not move. I tested the motor and cable",
"does not move. I tested the motor and cable on another system and",
"my extruder to work on my Creality Ender-4 printer. I have heated the",
"motor and cable on another system and they work just fine. Could it",
"but the extruder does not move. I tested the motor and cable on",
"to work on my Creality Ender-4 printer. I have heated the nozzle but"
] |
[
"a voltage test across the output terminal at D8 where the heated bed",
"have a fan attached to D9. This leaves this terminal open and with",
"I then noticed that the LED that usually lights up for D8 was",
"I'm pretty confident the bed itself is not the problem as I've ran",
"MOSFET. Despite this I have found no information on how to go about",
"from D8 and this time the LED lit up like it was supposed",
"as I've ran continuity tests from the wires and a resistance check (which",
"D8 was turned off. The weird thing is, I unplugged the wires from",
"ran continuity tests from the wires and a resistance check (which showed a",
"supposed to. Due to this, I believe the problem to be with the",
"output terminal at D8 where the heated bed should be outputted to. The",
"to. The result came up with nearly 0 V. I then noticed that",
"itself is not the problem as I've ran continuity tests from the wires",
"no information on how to go about accomplishing this. What do you guys",
"checks across the input terminals which showed a successful output of 12 V.",
"fan, I do not have a fan attached to D9. This leaves this",
"it should be). I've done voltage checks across the input terminals which showed",
"set up for a fan, I do not have a fan attached to",
"Despite this I have found no information on how to go about accomplishing",
"information on how to go about accomplishing this. What do you guys think?",
"this I have found no information on how to go about accomplishing this.",
"this terminal open and with a potentially unharmed MOSFET. Despite this I have",
"fan attached to D9. This leaves this terminal open and with a potentially",
"(which showed a total resistance of about 1.5 ohms, which is where it",
"a fan, I do not have a fan attached to D9. This leaves",
"this time the LED lit up like it was supposed to. Due to",
"said my heated bed stopped heating mid print. I'm pretty confident the bed",
"should be). I've done voltage checks across the input terminals which showed a",
"V. Finally I did a voltage test across the output terminal at D8",
"wires and a resistance check (which showed a total resistance of about 1.5",
"lights up for D8 was turned off. The weird thing is, I unplugged",
"the problem to be with the MOSFET attached to D8. My proposed solution",
"to move the heated bed terminal to D9 instead of D8. I wish",
"about 1.5 ohms, which is where it should be). I've done voltage checks",
"Is that even a good idea or should the component (or board be",
"have found no information on how to go about accomplishing this. What do",
"of 12 V. Finally I did a voltage test across the output terminal",
"the wires and a resistance check (which showed a total resistance of about",
"should be outputted to. The result came up with nearly 0 V. I",
"I wish to this because despite the firmware set up for a fan,",
"D9. This leaves this terminal open and with a potentially unharmed MOSFET. Despite",
"continuity tests from the wires and a resistance check (which showed a total",
"and with a potentially unharmed MOSFET. Despite this I have found no information",
"So as the title said my heated bed stopped heating mid print. I'm",
"a resistance check (which showed a total resistance of about 1.5 ohms, which",
"came up with nearly 0 V. I then noticed that the LED that",
"for D8 was turned off. The weird thing is, I unplugged the wires",
"This leaves this terminal open and with a potentially unharmed MOSFET. Despite this",
"was supposed to. Due to this, I believe the problem to be with",
"or should the component (or board be replaced)? Any help would be greatly",
"The result came up with nearly 0 V. I then noticed that the",
"because despite the firmware set up for a fan, I do not have",
"resistance of about 1.5 ohms, which is where it should be). I've done",
"attached to D8. My proposed solution would be to move the heated bed",
"up with nearly 0 V. I then noticed that the LED that usually",
"it was supposed to. Due to this, I believe the problem to be",
"time the LED lit up like it was supposed to. Due to this,",
"on how to go about accomplishing this. What do you guys think? Is",
"be outputted to. The result came up with nearly 0 V. I then",
"input terminals which showed a successful output of 12 V. Finally I did",
"0 V. I then noticed that the LED that usually lights up for",
"D8. My proposed solution would be to move the heated bed terminal to",
"of about 1.5 ohms, which is where it should be). I've done voltage",
"heated bed stopped heating mid print. I'm pretty confident the bed itself is",
"up for D8 was turned off. The weird thing is, I unplugged the",
"ohms, which is where it should be). I've done voltage checks across the",
"the output terminal at D8 where the heated bed should be outputted to.",
"unplugged the wires from D8 and this time the LED lit up like",
"move the heated bed terminal to D9 instead of D8. I wish to",
"was turned off. The weird thing is, I unplugged the wires from D8",
"heated bed terminal to D9 instead of D8. I wish to this because",
"D8. I wish to this because despite the firmware set up for a",
"like it was supposed to. Due to this, I believe the problem to",
"outputted to. The result came up with nearly 0 V. I then noticed",
"across the input terminals which showed a successful output of 12 V. Finally",
"a total resistance of about 1.5 ohms, which is where it should be).",
"LED that usually lights up for D8 was turned off. The weird thing",
"is, I unplugged the wires from D8 and this time the LED lit",
"idea or should the component (or board be replaced)? Any help would be",
"test across the output terminal at D8 where the heated bed should be",
"nearly 0 V. I then noticed that the LED that usually lights up",
"up like it was supposed to. Due to this, I believe the problem",
"believe the problem to be with the MOSFET attached to D8. My proposed",
"stopped heating mid print. I'm pretty confident the bed itself is not the",
"the firmware set up for a fan, I do not have a fan",
"that even a good idea or should the component (or board be replaced)?",
"up for a fan, I do not have a fan attached to D9.",
"for a fan, I do not have a fan attached to D9. This",
"that usually lights up for D8 was turned off. The weird thing is,",
"proposed solution would be to move the heated bed terminal to D9 instead",
"where it should be). I've done voltage checks across the input terminals which",
"a fan attached to D9. This leaves this terminal open and with a",
"solution would be to move the heated bed terminal to D9 instead of",
"think? Is that even a good idea or should the component (or board",
"print. I'm pretty confident the bed itself is not the problem as I've",
"the bed itself is not the problem as I've ran continuity tests from",
"successful output of 12 V. Finally I did a voltage test across the",
"terminal to D9 instead of D8. I wish to this because despite the",
"you guys think? Is that even a good idea or should the component",
"I did a voltage test across the output terminal at D8 where the",
"is not the problem as I've ran continuity tests from the wires and",
"at D8 where the heated bed should be outputted to. The result came",
"My proposed solution would be to move the heated bed terminal to D9",
"which is where it should be). I've done voltage checks across the input",
"I believe the problem to be with the MOSFET attached to D8. My",
"a good idea or should the component (or board be replaced)? Any help",
"guys think? Is that even a good idea or should the component (or",
"V. I then noticed that the LED that usually lights up for D8",
"accomplishing this. What do you guys think? Is that even a good idea",
"the input terminals which showed a successful output of 12 V. Finally I",
"a potentially unharmed MOSFET. Despite this I have found no information on how",
"terminal at D8 where the heated bed should be outputted to. The result",
"output of 12 V. Finally I did a voltage test across the output",
"lit up like it was supposed to. Due to this, I believe the",
"terminals which showed a successful output of 12 V. Finally I did a",
"despite the firmware set up for a fan, I do not have a",
"I've done voltage checks across the input terminals which showed a successful output",
"not the problem as I've ran continuity tests from the wires and a",
"which showed a successful output of 12 V. Finally I did a voltage",
"usually lights up for D8 was turned off. The weird thing is, I",
"confident the bed itself is not the problem as I've ran continuity tests",
"bed terminal to D9 instead of D8. I wish to this because despite",
"would be to move the heated bed terminal to D9 instead of D8.",
"this. What do you guys think? Is that even a good idea or",
"be to move the heated bed terminal to D9 instead of D8. I",
"open and with a potentially unharmed MOSFET. Despite this I have found no",
"tests from the wires and a resistance check (which showed a total resistance",
"and a resistance check (which showed a total resistance of about 1.5 ohms,",
"voltage checks across the input terminals which showed a successful output of 12",
"12 V. Finally I did a voltage test across the output terminal at",
"this, I believe the problem to be with the MOSFET attached to D8.",
"the wires from D8 and this time the LED lit up like it",
"total resistance of about 1.5 ohms, which is where it should be). I've",
"problem to be with the MOSFET attached to D8. My proposed solution would",
"my heated bed stopped heating mid print. I'm pretty confident the bed itself",
"bed stopped heating mid print. I'm pretty confident the bed itself is not",
"across the output terminal at D8 where the heated bed should be outputted",
"go about accomplishing this. What do you guys think? Is that even a",
"leaves this terminal open and with a potentially unharmed MOSFET. Despite this I",
"done voltage checks across the input terminals which showed a successful output of",
"to D9 instead of D8. I wish to this because despite the firmware",
"heating mid print. I'm pretty confident the bed itself is not the problem",
"off. The weird thing is, I unplugged the wires from D8 and this",
"thing is, I unplugged the wires from D8 and this time the LED",
"to. Due to this, I believe the problem to be with the MOSFET",
"as the title said my heated bed stopped heating mid print. I'm pretty",
"good idea or should the component (or board be replaced)? Any help would",
"to be with the MOSFET attached to D8. My proposed solution would be",
"title said my heated bed stopped heating mid print. I'm pretty confident the",
"I have found no information on how to go about accomplishing this. What",
"should the component (or board be replaced)? Any help would be greatly appreciated.",
"where the heated bed should be outputted to. The result came up with",
"the LED that usually lights up for D8 was turned off. The weird",
"instead of D8. I wish to this because despite the firmware set up",
"a successful output of 12 V. Finally I did a voltage test across",
"bed itself is not the problem as I've ran continuity tests from the",
"showed a successful output of 12 V. Finally I did a voltage test",
"to this because despite the firmware set up for a fan, I do",
"attached to D9. This leaves this terminal open and with a potentially unharmed",
"D9 instead of D8. I wish to this because despite the firmware set",
"about accomplishing this. What do you guys think? Is that even a good",
"then noticed that the LED that usually lights up for D8 was turned",
"the title said my heated bed stopped heating mid print. I'm pretty confident",
"do you guys think? Is that even a good idea or should the",
"I unplugged the wires from D8 and this time the LED lit up",
"LED lit up like it was supposed to. Due to this, I believe",
"weird thing is, I unplugged the wires from D8 and this time the",
"Finally I did a voltage test across the output terminal at D8 where",
"to go about accomplishing this. What do you guys think? Is that even",
"wires from D8 and this time the LED lit up like it was",
"I've ran continuity tests from the wires and a resistance check (which showed",
"showed a total resistance of about 1.5 ohms, which is where it should",
"to this, I believe the problem to be with the MOSFET attached to",
"not have a fan attached to D9. This leaves this terminal open and",
"to D9. This leaves this terminal open and with a potentially unharmed MOSFET.",
"bed should be outputted to. The result came up with nearly 0 V.",
"terminal open and with a potentially unharmed MOSFET. Despite this I have found",
"this because despite the firmware set up for a fan, I do not",
"did a voltage test across the output terminal at D8 where the heated",
"with nearly 0 V. I then noticed that the LED that usually lights",
"firmware set up for a fan, I do not have a fan attached",
"The weird thing is, I unplugged the wires from D8 and this time",
"even a good idea or should the component (or board be replaced)? Any",
"D8 and this time the LED lit up like it was supposed to.",
"be with the MOSFET attached to D8. My proposed solution would be to",
"What do you guys think? Is that even a good idea or should",
"pretty confident the bed itself is not the problem as I've ran continuity",
"the LED lit up like it was supposed to. Due to this, I",
"that the LED that usually lights up for D8 was turned off. The",
"MOSFET attached to D8. My proposed solution would be to move the heated",
"mid print. I'm pretty confident the bed itself is not the problem as",
"heated bed should be outputted to. The result came up with nearly 0",
"be). I've done voltage checks across the input terminals which showed a successful",
"turned off. The weird thing is, I unplugged the wires from D8 and",
"is where it should be). I've done voltage checks across the input terminals",
"with a potentially unharmed MOSFET. Despite this I have found no information on",
"potentially unharmed MOSFET. Despite this I have found no information on how to",
"I do not have a fan attached to D9. This leaves this terminal",
"1.5 ohms, which is where it should be). I've done voltage checks across",
"how to go about accomplishing this. What do you guys think? Is that",
"voltage test across the output terminal at D8 where the heated bed should",
"Due to this, I believe the problem to be with the MOSFET attached",
"resistance check (which showed a total resistance of about 1.5 ohms, which is",
"check (which showed a total resistance of about 1.5 ohms, which is where",
"wish to this because despite the firmware set up for a fan, I",
"of D8. I wish to this because despite the firmware set up for",
"with the MOSFET attached to D8. My proposed solution would be to move",
"and this time the LED lit up like it was supposed to. Due",
"found no information on how to go about accomplishing this. What do you",
"to D8. My proposed solution would be to move the heated bed terminal",
"the problem as I've ran continuity tests from the wires and a resistance",
"the heated bed should be outputted to. The result came up with nearly",
"do not have a fan attached to D9. This leaves this terminal open",
"the heated bed terminal to D9 instead of D8. I wish to this",
"the MOSFET attached to D8. My proposed solution would be to move the",
"from the wires and a resistance check (which showed a total resistance of",
"unharmed MOSFET. Despite this I have found no information on how to go",
"D8 where the heated bed should be outputted to. The result came up",
"noticed that the LED that usually lights up for D8 was turned off.",
"result came up with nearly 0 V. I then noticed that the LED",
"problem as I've ran continuity tests from the wires and a resistance check"
] |
[
"both and if the glass alone had a significant effect on the sounds",
"Im planning on building an enclosure for my CR-10S and am debating whether",
"heat in or going with double pane glass walls. My main concern is",
"heard a printer before and after with both and if the glass alone",
"for my CR-10S and am debating whether to use MDF walls lined with",
"insulation will give better sounds dampening, but I am wondering if anyone has",
"I am wondering if anyone has tried both or at least heard a",
"debating whether to use MDF walls lined with an insulation foam that reduces",
"the heat in or going with double pane glass walls. My main concern",
"dampening, but I am wondering if anyone has tried both or at least",
"that reduces noise and keeps the heat in or going with double pane",
"has tried both or at least heard a printer before and after with",
"whether to use MDF walls lined with an insulation foam that reduces noise",
"insulation foam that reduces noise and keeps the heat in or going with",
"with insulation will give better sounds dampening, but I am wondering if anyone",
"better sounds dampening, but I am wondering if anyone has tried both or",
"necessarily keeping the enclosure hot as it is for noise reduction. Obviously the",
"in or going with double pane glass walls. My main concern is not",
"walls. My main concern is not necessarily keeping the enclosure hot as it",
"wood with insulation will give better sounds dampening, but I am wondering if",
"is for noise reduction. Obviously the wood with insulation will give better sounds",
"and after with both and if the glass alone had a significant effect",
"at least heard a printer before and after with both and if the",
"Obviously the wood with insulation will give better sounds dampening, but I am",
"My main concern is not necessarily keeping the enclosure hot as it is",
"and keeps the heat in or going with double pane glass walls. My",
"walls lined with an insulation foam that reduces noise and keeps the heat",
"reduces noise and keeps the heat in or going with double pane glass",
"with an insulation foam that reduces noise and keeps the heat in or",
"not necessarily keeping the enclosure hot as it is for noise reduction. Obviously",
"main concern is not necessarily keeping the enclosure hot as it is for",
"reduction. Obviously the wood with insulation will give better sounds dampening, but I",
"foam that reduces noise and keeps the heat in or going with double",
"hot as it is for noise reduction. Obviously the wood with insulation will",
"a printer before and after with both and if the glass alone had",
"noise and keeps the heat in or going with double pane glass walls.",
"wondering if anyone has tried both or at least heard a printer before",
"keeps the heat in or going with double pane glass walls. My main",
"printer before and after with both and if the glass alone had a",
"for noise reduction. Obviously the wood with insulation will give better sounds dampening,",
"CR-10S and am debating whether to use MDF walls lined with an insulation",
"enclosure for my CR-10S and am debating whether to use MDF walls lined",
"to use MDF walls lined with an insulation foam that reduces noise and",
"and if the glass alone had a significant effect on the sounds reduction.",
"an enclosure for my CR-10S and am debating whether to use MDF walls",
"will give better sounds dampening, but I am wondering if anyone has tried",
"if anyone has tried both or at least heard a printer before and",
"or at least heard a printer before and after with both and if",
"enclosure hot as it is for noise reduction. Obviously the wood with insulation",
"tried both or at least heard a printer before and after with both",
"the wood with insulation will give better sounds dampening, but I am wondering",
"before and after with both and if the glass alone had a significant",
"is not necessarily keeping the enclosure hot as it is for noise reduction.",
"or going with double pane glass walls. My main concern is not necessarily",
"sounds dampening, but I am wondering if anyone has tried both or at",
"an insulation foam that reduces noise and keeps the heat in or going",
"but I am wondering if anyone has tried both or at least heard",
"the enclosure hot as it is for noise reduction. Obviously the wood with",
"it is for noise reduction. Obviously the wood with insulation will give better",
"am debating whether to use MDF walls lined with an insulation foam that",
"as it is for noise reduction. Obviously the wood with insulation will give",
"building an enclosure for my CR-10S and am debating whether to use MDF",
"concern is not necessarily keeping the enclosure hot as it is for noise",
"both or at least heard a printer before and after with both and",
"noise reduction. Obviously the wood with insulation will give better sounds dampening, but",
"going with double pane glass walls. My main concern is not necessarily keeping",
"double pane glass walls. My main concern is not necessarily keeping the enclosure",
"anyone has tried both or at least heard a printer before and after",
"on building an enclosure for my CR-10S and am debating whether to use",
"glass walls. My main concern is not necessarily keeping the enclosure hot as",
"after with both and if the glass alone had a significant effect on",
"planning on building an enclosure for my CR-10S and am debating whether to",
"and am debating whether to use MDF walls lined with an insulation foam",
"lined with an insulation foam that reduces noise and keeps the heat in",
"with both and if the glass alone had a significant effect on the",
"my CR-10S and am debating whether to use MDF walls lined with an",
"am wondering if anyone has tried both or at least heard a printer",
"give better sounds dampening, but I am wondering if anyone has tried both",
"use MDF walls lined with an insulation foam that reduces noise and keeps",
"pane glass walls. My main concern is not necessarily keeping the enclosure hot",
"keeping the enclosure hot as it is for noise reduction. Obviously the wood",
"MDF walls lined with an insulation foam that reduces noise and keeps the",
"with double pane glass walls. My main concern is not necessarily keeping the",
"least heard a printer before and after with both and if the glass"
] |
[
"from the infill. Knowing this, and knowing the dimensions of the box, the",
"the box, the weight of my body, the surface area of my shoes,",
"of my shoes, and the material I'm working with, is there any good",
"print settings? I know that structural strength comes from the infill. Knowing this,",
"settings? I know that structural strength comes from the infill. Knowing this, and",
"my body, the surface area of my shoes, and the material I'm working",
"that structural strength comes from the infill. Knowing this, and knowing the dimensions",
"can stand on without any risk of it breaking, is there any good",
"stand on without any risk of it breaking, is there any good way",
"is there any good way to calculate the appropriate print settings? I know",
"and I want to print a box that I can stand on without",
"standard PLA, and I want to print a box that I can stand",
"of my body, the surface area of my shoes, and the material I'm",
"I can stand on without any risk of it breaking, is there any",
"with, is there any good way to determine the minimum infill percentage I'd",
"box that I can stand on without any risk of it breaking, is",
"good way to determine the minimum infill percentage I'd want to use in",
"good way to calculate the appropriate print settings? I know that structural strength",
"dimensions of the box, the weight of my body, the surface area of",
"of the box, the weight of my body, the surface area of my",
"to calculate the appropriate print settings? I know that structural strength comes from",
"this, and knowing the dimensions of the box, the weight of my body,",
"want to print a box that I can stand on without any risk",
"and knowing the dimensions of the box, the weight of my body, the",
"the appropriate print settings? I know that structural strength comes from the infill.",
"there any good way to calculate the appropriate print settings? I know that",
"working with standard PLA, and I want to print a box that I",
"infill. Knowing this, and knowing the dimensions of the box, the weight of",
"the surface area of my shoes, and the material I'm working with, is",
"that I can stand on without any risk of it breaking, is there",
"any good way to calculate the appropriate print settings? I know that structural",
"to print a box that I can stand on without any risk of",
"risk of it breaking, is there any good way to calculate the appropriate",
"way to calculate the appropriate print settings? I know that structural strength comes",
"a box that I can stand on without any risk of it breaking,",
"If I'm working with standard PLA, and I want to print a box",
"I'm working with, is there any good way to determine the minimum infill",
"it breaking, is there any good way to calculate the appropriate print settings?",
"know that structural strength comes from the infill. Knowing this, and knowing the",
"weight of my body, the surface area of my shoes, and the material",
"strength comes from the infill. Knowing this, and knowing the dimensions of the",
"box, the weight of my body, the surface area of my shoes, and",
"I want to print a box that I can stand on without any",
"with standard PLA, and I want to print a box that I can",
"print a box that I can stand on without any risk of it",
"appropriate print settings? I know that structural strength comes from the infill. Knowing",
"knowing the dimensions of the box, the weight of my body, the surface",
"of it breaking, is there any good way to calculate the appropriate print",
"I know that structural strength comes from the infill. Knowing this, and knowing",
"body, the surface area of my shoes, and the material I'm working with,",
"without any risk of it breaking, is there any good way to calculate",
"the minimum infill percentage I'd want to use in order to safely bear",
"the infill. Knowing this, and knowing the dimensions of the box, the weight",
"surface area of my shoes, and the material I'm working with, is there",
"way to determine the minimum infill percentage I'd want to use in order",
"the dimensions of the box, the weight of my body, the surface area",
"comes from the infill. Knowing this, and knowing the dimensions of the box,",
"any risk of it breaking, is there any good way to calculate the",
"the material I'm working with, is there any good way to determine the",
"any good way to determine the minimum infill percentage I'd want to use",
"the weight of my body, the surface area of my shoes, and the",
"working with, is there any good way to determine the minimum infill percentage",
"breaking, is there any good way to calculate the appropriate print settings? I",
"shoes, and the material I'm working with, is there any good way to",
"calculate the appropriate print settings? I know that structural strength comes from the",
"my shoes, and the material I'm working with, is there any good way",
"is there any good way to determine the minimum infill percentage I'd want",
"I'm working with standard PLA, and I want to print a box that",
"PLA, and I want to print a box that I can stand on",
"and the material I'm working with, is there any good way to determine",
"infill percentage I'd want to use in order to safely bear my weight?",
"to determine the minimum infill percentage I'd want to use in order to",
"there any good way to determine the minimum infill percentage I'd want to",
"material I'm working with, is there any good way to determine the minimum",
"structural strength comes from the infill. Knowing this, and knowing the dimensions of",
"determine the minimum infill percentage I'd want to use in order to safely",
"Knowing this, and knowing the dimensions of the box, the weight of my",
"on without any risk of it breaking, is there any good way to",
"area of my shoes, and the material I'm working with, is there any",
"minimum infill percentage I'd want to use in order to safely bear my"
] |
[
"fairly rigid sheet metal frame. In addition, I added steel rods has Z-braces.",
"to the desk (preventing the machine from moving) Surprisingly, these two opposites provided",
"freely) 2. bolt the machine to the desk (preventing the machine from moving)",
"for ghosting. My question is: *which approach is better*? Moreover, to further improvement,",
"1. soft floor mats under the feet (allowing the machine to move freely)",
"I see some pretty obvious ghosting. This happens for an inch or so",
"the machine from moving) Surprisingly, these two opposites provided exact same level of",
"is: *which approach is better*? Moreover, to further improvement, should I use... *",
"freedom to move); or... * (extreme version of 2) bolt the printer to",
"(heat bed) provides the Y-axis and the moving extruder provides the X-axis. It",
"an inch or so right after every sharp turn. Clearly, vibration is to",
"opposites provided exact same level of improvement for ghosting. My question is: *which",
"the situation: 1. soft floor mats under the feet (allowing the machine to",
"It is the kind where the moving plate (heat bed) provides the Y-axis",
"the freedom to move); or... * (extreme version of 2) bolt the printer",
"plate (heat bed) provides the Y-axis and the moving extruder provides the X-axis.",
"feet (allowing the machine to move freely) 2. bolt the machine to the",
"so right after every sharp turn. Clearly, vibration is to be blamed. I",
"Y-axis and the moving extruder provides the X-axis. It has a fairly rigid",
"should I use... * (extreme version of 1) hanging the printer from the",
"be blamed. I found two simple techniques that improves the situation: 1. soft",
"the moving extruder provides the X-axis. It has a fairly rigid sheet metal",
"improvement for ghosting. My question is: *which approach is better*? Moreover, to further",
"In addition, I added steel rods has Z-braces. I see some pretty obvious",
"Z-braces. I see some pretty obvious ghosting. This happens for an inch or",
"turn. Clearly, vibration is to be blamed. I found two simple techniques that",
"the Y-axis and the moving extruder provides the X-axis. It has a fairly",
"question is: *which approach is better*? Moreover, to further improvement, should I use...",
"This happens for an inch or so right after every sharp turn. Clearly,",
"for an inch or so right after every sharp turn. Clearly, vibration is",
"(allowing the machine to move freely) 2. bolt the machine to the desk",
"X-axis. It has a fairly rigid sheet metal frame. In addition, I added",
"* (extreme version of 2) bolt the printer to garage floor (0 freedom",
"simple techniques that improves the situation: 1. soft floor mats under the feet",
"Maker Select v2. It is the kind where the moving plate (heat bed)",
"bolt the machine to the desk (preventing the machine from moving) Surprisingly, these",
"machine from moving) Surprisingly, these two opposites provided exact same level of improvement",
"to move freely) 2. bolt the machine to the desk (preventing the machine",
"after every sharp turn. Clearly, vibration is to be blamed. I found two",
"move); or... * (extreme version of 2) bolt the printer to garage floor",
"sharp turn. Clearly, vibration is to be blamed. I found two simple techniques",
"the ceiling using bungee cords (maximize the freedom to move); or... * (extreme",
"steel rods has Z-braces. I see some pretty obvious ghosting. This happens for",
"I found two simple techniques that improves the situation: 1. soft floor mats",
"mats under the feet (allowing the machine to move freely) 2. bolt the",
"moving) Surprisingly, these two opposites provided exact same level of improvement for ghosting.",
"two simple techniques that improves the situation: 1. soft floor mats under the",
"and the moving extruder provides the X-axis. It has a fairly rigid sheet",
"under the feet (allowing the machine to move freely) 2. bolt the machine",
"Moreover, to further improvement, should I use... * (extreme version of 1) hanging",
"or... * (extreme version of 2) bolt the printer to garage floor (0",
"obvious ghosting. This happens for an inch or so right after every sharp",
"have a Monoprice Maker Select v2. It is the kind where the moving",
"bungee cords (maximize the freedom to move); or... * (extreme version of 2)",
"(extreme version of 1) hanging the printer from the ceiling using bungee cords",
"pretty obvious ghosting. This happens for an inch or so right after every",
"the feet (allowing the machine to move freely) 2. bolt the machine to",
"v2. It is the kind where the moving plate (heat bed) provides the",
"techniques that improves the situation: 1. soft floor mats under the feet (allowing",
"printer from the ceiling using bungee cords (maximize the freedom to move); or...",
"(extreme version of 2) bolt the printer to garage floor (0 freedom to",
"rigid sheet metal frame. In addition, I added steel rods has Z-braces. I",
"the printer from the ceiling using bungee cords (maximize the freedom to move);",
"has a fairly rigid sheet metal frame. In addition, I added steel rods",
"of improvement for ghosting. My question is: *which approach is better*? Moreover, to",
"found two simple techniques that improves the situation: 1. soft floor mats under",
"the kind where the moving plate (heat bed) provides the Y-axis and the",
"provided exact same level of improvement for ghosting. My question is: *which approach",
"two opposites provided exact same level of improvement for ghosting. My question is:",
"is the kind where the moving plate (heat bed) provides the Y-axis and",
"hanging the printer from the ceiling using bungee cords (maximize the freedom to",
"bed) provides the Y-axis and the moving extruder provides the X-axis. It has",
"Surprisingly, these two opposites provided exact same level of improvement for ghosting. My",
"where the moving plate (heat bed) provides the Y-axis and the moving extruder",
"machine to the desk (preventing the machine from moving) Surprisingly, these two opposites",
"ghosting. My question is: *which approach is better*? Moreover, to further improvement, should",
"2. bolt the machine to the desk (preventing the machine from moving) Surprisingly,",
"metal frame. In addition, I added steel rods has Z-braces. I see some",
"Clearly, vibration is to be blamed. I found two simple techniques that improves",
"happens for an inch or so right after every sharp turn. Clearly, vibration",
"floor mats under the feet (allowing the machine to move freely) 2. bolt",
"every sharp turn. Clearly, vibration is to be blamed. I found two simple",
"use... * (extreme version of 1) hanging the printer from the ceiling using",
"right after every sharp turn. Clearly, vibration is to be blamed. I found",
"rods has Z-braces. I see some pretty obvious ghosting. This happens for an",
"better*? Moreover, to further improvement, should I use... * (extreme version of 1)",
"the machine to the desk (preventing the machine from moving) Surprisingly, these two",
"situation: 1. soft floor mats under the feet (allowing the machine to move",
"the desk (preventing the machine from moving) Surprisingly, these two opposites provided exact",
"cords (maximize the freedom to move); or... * (extreme version of 2) bolt",
"vibration is to be blamed. I found two simple techniques that improves the",
"*which approach is better*? Moreover, to further improvement, should I use... * (extreme",
"a Monoprice Maker Select v2. It is the kind where the moving plate",
"desk (preventing the machine from moving) Surprisingly, these two opposites provided exact same",
"using bungee cords (maximize the freedom to move); or... * (extreme version of",
"version of 2) bolt the printer to garage floor (0 freedom to move)",
"moving plate (heat bed) provides the Y-axis and the moving extruder provides the",
"has Z-braces. I see some pretty obvious ghosting. This happens for an inch",
"is to be blamed. I found two simple techniques that improves the situation:",
"some pretty obvious ghosting. This happens for an inch or so right after",
"Select v2. It is the kind where the moving plate (heat bed) provides",
"to move); or... * (extreme version of 2) bolt the printer to garage",
"level of improvement for ghosting. My question is: *which approach is better*? Moreover,",
"extruder provides the X-axis. It has a fairly rigid sheet metal frame. In",
"kind where the moving plate (heat bed) provides the Y-axis and the moving",
"It has a fairly rigid sheet metal frame. In addition, I added steel",
"move freely) 2. bolt the machine to the desk (preventing the machine from",
"same level of improvement for ghosting. My question is: *which approach is better*?",
"(preventing the machine from moving) Surprisingly, these two opposites provided exact same level",
"moving extruder provides the X-axis. It has a fairly rigid sheet metal frame.",
"provides the X-axis. It has a fairly rigid sheet metal frame. In addition,",
"or so right after every sharp turn. Clearly, vibration is to be blamed.",
"soft floor mats under the feet (allowing the machine to move freely) 2.",
"(maximize the freedom to move); or... * (extreme version of 2) bolt the",
"improves the situation: 1. soft floor mats under the feet (allowing the machine",
"ghosting. This happens for an inch or so right after every sharp turn.",
"these two opposites provided exact same level of improvement for ghosting. My question",
"blamed. I found two simple techniques that improves the situation: 1. soft floor",
"1) hanging the printer from the ceiling using bungee cords (maximize the freedom",
"further improvement, should I use... * (extreme version of 1) hanging the printer",
"provides the Y-axis and the moving extruder provides the X-axis. It has a",
"the machine to move freely) 2. bolt the machine to the desk (preventing",
"from the ceiling using bungee cords (maximize the freedom to move); or... *",
"inch or so right after every sharp turn. Clearly, vibration is to be",
"approach is better*? Moreover, to further improvement, should I use... * (extreme version",
"that improves the situation: 1. soft floor mats under the feet (allowing the",
"see some pretty obvious ghosting. This happens for an inch or so right",
"to be blamed. I found two simple techniques that improves the situation: 1.",
"exact same level of improvement for ghosting. My question is: *which approach is",
"Monoprice Maker Select v2. It is the kind where the moving plate (heat",
"I added steel rods has Z-braces. I see some pretty obvious ghosting. This",
"from moving) Surprisingly, these two opposites provided exact same level of improvement for",
"* (extreme version of 1) hanging the printer from the ceiling using bungee",
"version of 1) hanging the printer from the ceiling using bungee cords (maximize",
"I use... * (extreme version of 1) hanging the printer from the ceiling",
"to further improvement, should I use... * (extreme version of 1) hanging the",
"of 1) hanging the printer from the ceiling using bungee cords (maximize the",
"the moving plate (heat bed) provides the Y-axis and the moving extruder provides",
"sheet metal frame. In addition, I added steel rods has Z-braces. I see",
"added steel rods has Z-braces. I see some pretty obvious ghosting. This happens",
"machine to move freely) 2. bolt the machine to the desk (preventing the",
"I have a Monoprice Maker Select v2. It is the kind where the",
"improvement, should I use... * (extreme version of 1) hanging the printer from",
"ceiling using bungee cords (maximize the freedom to move); or... * (extreme version",
"a fairly rigid sheet metal frame. In addition, I added steel rods has",
"addition, I added steel rods has Z-braces. I see some pretty obvious ghosting.",
"is better*? Moreover, to further improvement, should I use... * (extreme version of",
"of 2) bolt the printer to garage floor (0 freedom to move) ?",
"frame. In addition, I added steel rods has Z-braces. I see some pretty",
"the X-axis. It has a fairly rigid sheet metal frame. In addition, I",
"My question is: *which approach is better*? Moreover, to further improvement, should I"
] |
[
"(easily and/or without voiding the warranty and taking it completely apart). I imagine",
"how do you reinsulate the MakerBot Smart Extruders? Backstory: I work at the",
"the MakerBot Smart Extruders? Backstory: I work at the library. We've recently replaced",
"and taking it completely apart). I imagine even with the cotton + Kapton",
"hand, so I tried to wrap it with that, per [this thread](https://3dprinting.stackexchange.com/questions/1247/efficient-and-easy-way-to-thermally-insulate-the-heat-block-of-the-hotend). It's",
"the cotton + Kapton tape, you'd need better access to the hotend than",
"the warranty and taking it completely apart). I imagine even with the cotton",
"reinsulate the MakerBot Smart Extruders? Backstory: I work at the library. We've recently",
"Smart Extruder, which I cannot figure out to remove (easily and/or without voiding",
"the request chain to get materials in and I had some plumbing tape",
"Prosi. As a new hire, I'm obsessed with the 3D printers. I'm trying",
"It's not going too well because of the housing around the Smart Extruder,",
"a new hire, I'm obsessed with the 3D printers. I'm trying to make",
"per [this thread](https://3dprinting.stackexchange.com/questions/1247/efficient-and-easy-way-to-thermally-insulate-the-heat-block-of-the-hotend). It's not going too well because of the housing around",
"hire, I'm obsessed with the 3D printers. I'm trying to make it my",
"thread](https://3dprinting.stackexchange.com/questions/1247/efficient-and-easy-way-to-thermally-insulate-the-heat-block-of-the-hotend). It's not going too well because of the housing around the Smart",
"It takes quite the request chain to get materials in and I had",
"figure out to remove (easily and/or without voiding the warranty and taking it",
"+ Kapton tape, you'd need better access to the hotend than the housing",
"to make it my mission to get the MakerBot working again, just so",
"had some plumbing tape on hand, so I tried to wrap it with",
"which I cannot figure out to remove (easily and/or without voiding the warranty",
"Simple question: how do you reinsulate the MakerBot Smart Extruders? Backstory: I work",
"(extruder connection issues followed by software incompatibility) with a Prosi. As a new",
"As a new hire, I'm obsessed with the 3D printers. I'm trying to",
"need better access to the hotend than the housing allows. Any help is",
"I'm trying to make it my mission to get the MakerBot working again,",
"the Smart Extruder, which I cannot figure out to remove (easily and/or without",
"around the Smart Extruder, which I cannot figure out to remove (easily and/or",
"imagine even with the cotton + Kapton tape, you'd need better access to",
"followed by software incompatibility) with a Prosi. As a new hire, I'm obsessed",
"software incompatibility) with a Prosi. As a new hire, I'm obsessed with the",
"taking it completely apart). I imagine even with the cotton + Kapton tape,",
"materials in and I had some plumbing tape on hand, so I tried",
"printers running. It takes quite the request chain to get materials in and",
"at the library. We've recently replaced the MakerBot (extruder connection issues followed by",
"just so we can have two printers running. It takes quite the request",
"can have two printers running. It takes quite the request chain to get",
"not going too well because of the housing around the Smart Extruder, which",
"voiding the warranty and taking it completely apart). I imagine even with the",
"takes quite the request chain to get materials in and I had some",
"remove (easily and/or without voiding the warranty and taking it completely apart). I",
"do you reinsulate the MakerBot Smart Extruders? Backstory: I work at the library.",
"housing around the Smart Extruder, which I cannot figure out to remove (easily",
"plumbing tape on hand, so I tried to wrap it with that, per",
"work at the library. We've recently replaced the MakerBot (extruder connection issues followed",
"we can have two printers running. It takes quite the request chain to",
"wrap it with that, per [this thread](https://3dprinting.stackexchange.com/questions/1247/efficient-and-easy-way-to-thermally-insulate-the-heat-block-of-the-hotend). It's not going too well because",
"Kapton tape, you'd need better access to the hotend than the housing allows.",
"obsessed with the 3D printers. I'm trying to make it my mission to",
"to get materials in and I had some plumbing tape on hand, so",
"because of the housing around the Smart Extruder, which I cannot figure out",
"too well because of the housing around the Smart Extruder, which I cannot",
"better access to the hotend than the housing allows. Any help is appreciated!",
"so I tried to wrap it with that, per [this thread](https://3dprinting.stackexchange.com/questions/1247/efficient-and-easy-way-to-thermally-insulate-the-heat-block-of-the-hotend). It's not",
"mission to get the MakerBot working again, just so we can have two",
"We've recently replaced the MakerBot (extruder connection issues followed by software incompatibility) with",
"you reinsulate the MakerBot Smart Extruders? Backstory: I work at the library. We've",
"it with that, per [this thread](https://3dprinting.stackexchange.com/questions/1247/efficient-and-easy-way-to-thermally-insulate-the-heat-block-of-the-hotend). It's not going too well because of",
"completely apart). I imagine even with the cotton + Kapton tape, you'd need",
"you'd need better access to the hotend than the housing allows. Any help",
"and/or without voiding the warranty and taking it completely apart). I imagine even",
"on hand, so I tried to wrap it with that, per [this thread](https://3dprinting.stackexchange.com/questions/1247/efficient-and-easy-way-to-thermally-insulate-the-heat-block-of-the-hotend).",
"running. It takes quite the request chain to get materials in and I",
"the MakerBot (extruder connection issues followed by software incompatibility) with a Prosi. As",
"working again, just so we can have two printers running. It takes quite",
"my mission to get the MakerBot working again, just so we can have",
"MakerBot (extruder connection issues followed by software incompatibility) with a Prosi. As a",
"recently replaced the MakerBot (extruder connection issues followed by software incompatibility) with a",
"a Prosi. As a new hire, I'm obsessed with the 3D printers. I'm",
"out to remove (easily and/or without voiding the warranty and taking it completely",
"[this thread](https://3dprinting.stackexchange.com/questions/1247/efficient-and-easy-way-to-thermally-insulate-the-heat-block-of-the-hotend). It's not going too well because of the housing around the",
"by software incompatibility) with a Prosi. As a new hire, I'm obsessed with",
"and I had some plumbing tape on hand, so I tried to wrap",
"chain to get materials in and I had some plumbing tape on hand,",
"the MakerBot working again, just so we can have two printers running. It",
"get the MakerBot working again, just so we can have two printers running.",
"3D printers. I'm trying to make it my mission to get the MakerBot",
"with that, per [this thread](https://3dprinting.stackexchange.com/questions/1247/efficient-and-easy-way-to-thermally-insulate-the-heat-block-of-the-hotend). It's not going too well because of the",
"incompatibility) with a Prosi. As a new hire, I'm obsessed with the 3D",
"apart). I imagine even with the cotton + Kapton tape, you'd need better",
"I'm obsessed with the 3D printers. I'm trying to make it my mission",
"cannot figure out to remove (easily and/or without voiding the warranty and taking",
"of the housing around the Smart Extruder, which I cannot figure out to",
"tape on hand, so I tried to wrap it with that, per [this",
"going too well because of the housing around the Smart Extruder, which I",
"it my mission to get the MakerBot working again, just so we can",
"well because of the housing around the Smart Extruder, which I cannot figure",
"have two printers running. It takes quite the request chain to get materials",
"that, per [this thread](https://3dprinting.stackexchange.com/questions/1247/efficient-and-easy-way-to-thermally-insulate-the-heat-block-of-the-hotend). It's not going too well because of the housing",
"without voiding the warranty and taking it completely apart). I imagine even with",
"it completely apart). I imagine even with the cotton + Kapton tape, you'd",
"question: how do you reinsulate the MakerBot Smart Extruders? Backstory: I work at",
"Extruder, which I cannot figure out to remove (easily and/or without voiding the",
"MakerBot working again, just so we can have two printers running. It takes",
"Smart Extruders? Backstory: I work at the library. We've recently replaced the MakerBot",
"library. We've recently replaced the MakerBot (extruder connection issues followed by software incompatibility)",
"Backstory: I work at the library. We've recently replaced the MakerBot (extruder connection",
"tried to wrap it with that, per [this thread](https://3dprinting.stackexchange.com/questions/1247/efficient-and-easy-way-to-thermally-insulate-the-heat-block-of-the-hotend). It's not going too",
"I imagine even with the cotton + Kapton tape, you'd need better access",
"new hire, I'm obsessed with the 3D printers. I'm trying to make it",
"to get the MakerBot working again, just so we can have two printers",
"issues followed by software incompatibility) with a Prosi. As a new hire, I'm",
"with the 3D printers. I'm trying to make it my mission to get",
"printers. I'm trying to make it my mission to get the MakerBot working",
"cotton + Kapton tape, you'd need better access to the hotend than the",
"I tried to wrap it with that, per [this thread](https://3dprinting.stackexchange.com/questions/1247/efficient-and-easy-way-to-thermally-insulate-the-heat-block-of-the-hotend). It's not going",
"again, just so we can have two printers running. It takes quite the",
"I work at the library. We've recently replaced the MakerBot (extruder connection issues",
"in and I had some plumbing tape on hand, so I tried to",
"make it my mission to get the MakerBot working again, just so we",
"some plumbing tape on hand, so I tried to wrap it with that,",
"so we can have two printers running. It takes quite the request chain",
"to remove (easily and/or without voiding the warranty and taking it completely apart).",
"get materials in and I had some plumbing tape on hand, so I",
"I cannot figure out to remove (easily and/or without voiding the warranty and",
"Extruders? Backstory: I work at the library. We've recently replaced the MakerBot (extruder",
"the library. We've recently replaced the MakerBot (extruder connection issues followed by software",
"with a Prosi. As a new hire, I'm obsessed with the 3D printers.",
"the housing around the Smart Extruder, which I cannot figure out to remove",
"MakerBot Smart Extruders? Backstory: I work at the library. We've recently replaced the",
"I had some plumbing tape on hand, so I tried to wrap it",
"the 3D printers. I'm trying to make it my mission to get the",
"request chain to get materials in and I had some plumbing tape on",
"with the cotton + Kapton tape, you'd need better access to the hotend",
"tape, you'd need better access to the hotend than the housing allows. Any",
"connection issues followed by software incompatibility) with a Prosi. As a new hire,",
"warranty and taking it completely apart). I imagine even with the cotton +",
"to wrap it with that, per [this thread](https://3dprinting.stackexchange.com/questions/1247/efficient-and-easy-way-to-thermally-insulate-the-heat-block-of-the-hotend). It's not going too well",
"even with the cotton + Kapton tape, you'd need better access to the",
"two printers running. It takes quite the request chain to get materials in",
"replaced the MakerBot (extruder connection issues followed by software incompatibility) with a Prosi.",
"quite the request chain to get materials in and I had some plumbing",
"trying to make it my mission to get the MakerBot working again, just"
] |
[
"lower my maximum retraction speed. What I tried since the rebuild: 1. Replace",
"with other values, but also about 2.5 times too high; 2. Connecting another",
"in the firmware, which does have this effect? I am using Marlin 1.8.5",
"-> G1 F100 E30 ``` and I got ``` 5220 steps for 30mm",
"even with another type of driver on different micro steps, of course with",
"the rebuild: 1. Replace and adjust the current of the stepper driver -",
"length ``` G92 E0 -> G1 F100 E30 ``` and I got ```",
"(reproducible). ``` It should be ``` 418.5 steps/mm*30mm = 12555 steps. ``` Where,",
"different micro steps, of course with other values, but also about 2.5 times",
"steps/mm (programmed in EEPROM and in firmware) on a specific amount of extrusion",
"too high; 2. Connecting another motor with another cable - the other motor",
"aluminum frame my extruder went from around 400 steps per mm at 16",
"recommendation perfectly) to a bit over 1000 steps per mm at 16 micro",
"2. Connecting another motor with another cable - the other motor with nothing",
"I measured the amount of steps my board sends at 418.5 steps/mm (programmed",
"steps my board sends at 418.5 steps/mm (programmed in EEPROM and in firmware)",
"steps per second lower my maximum retraction speed. What I tried since the",
"Or did I change something in the firmware, which does have this effect?",
"setup as before! E3D claims to have 437 steps per mm on a",
"perfectly fine before. ### Update: With an Arduino Nano I measured the amount",
"micro steps (which did match the manufacturer's recommendation perfectly) to a bit over",
"per mm at 16 micro steps (which did match the manufacturer's recommendation perfectly)",
"in firmware) on a specific amount of extrusion length ``` G92 E0 ->",
"amount of extrusion length ``` G92 E0 -> G1 F100 E30 ``` and",
"``` G92 E0 -> G1 F100 E30 ``` and I got ``` 5220",
"geared extruder and I am using the same setup as before! E3D claims",
"It should be ``` 418.5 steps/mm*30mm = 12555 steps. ``` Where, ``` (12555/5220)",
"(12555/5220) * 418.5 steps/mm = 1007 steps/mm ``` to have the effect of",
"E0 -> G1 F100 E30 ``` and I got ``` 5220 steps for",
"about 2.5 times too high; 2. Connecting another motor with another cable -",
"per second lower my maximum retraction speed. What I tried since the rebuild:",
"change, even with another type of driver on different micro steps, of course",
"17 stepper and 16 micro steps. This value was working perfectly fine before.",
"1007 steps/mm ``` to have the effect of 418.5 steps/mm ...which is, oddly,",
"around 400 steps per mm at 16 micro steps (which did match the",
"418.5 steps/mm*30mm = 12555 steps. ``` Where, ``` (12555/5220) * 418.5 steps/mm =",
"= 1007 steps/mm ``` to have the effect of 418.5 steps/mm ...which is,",
"also about 2.5 times too high; 2. Connecting another motor with another cable",
"change something in the firmware, which does have this effect? I am using",
"steps/revolution Nema 17 stepper and 16 micro steps. This value was working perfectly",
"problem that after upgrading my printer to an aluminum frame my extruder went",
"stepper. Could it be that the ATmega2560 on my MKS gen 1.4 board",
"my printer to an aluminum frame my extruder went from around 400 steps",
"``` It should be ``` 418.5 steps/mm*30mm = 12555 steps. ``` Where, ```",
"is a problem for me, since the limited amount of steps per second",
"something in the firmware, which does have this effect? I am using Marlin",
"an Arduino Nano I measured the amount of steps my board sends at",
"micro steps. This value was working perfectly fine before. ### Update: With an",
"of extrusion length ``` G92 E0 -> G1 F100 E30 ``` and I",
"no change, even with another type of driver on different micro steps, of",
"cable - the other motor with nothing attached to it drove the same",
"at 418.5 steps/mm (programmed in EEPROM and in firmware) on a specific amount",
"value was working perfectly fine before. ### Update: With an Arduino Nano I",
"E30 ``` and I got ``` 5220 steps for 30mm extrusion (reproducible). ```",
"``` and I got ``` 5220 steps for 30mm extrusion (reproducible). ``` It",
"amount of steps my board sends at 418.5 steps/mm (programmed in EEPROM and",
"have got a problem that after upgrading my printer to an aluminum frame",
"Update: With an Arduino Nano I measured the amount of steps my board",
"firmware, which does have this effect? I am using Marlin 1.8.5 and a",
"match the manufacturer's recommendation perfectly) to a bit over 1000 steps per mm",
"steps per mm on a 200 steps/revolution Nema 17 stepper and 16 micro",
"1:3 geared extruder and I am using the same setup as before! E3D",
"course with other values, but also about 2.5 times too high; 2. Connecting",
"steps/mm ``` to have the effect of 418.5 steps/mm ...which is, oddly, the",
"``` 418.5 steps/mm*30mm = 12555 steps. ``` Where, ``` (12555/5220) * 418.5 steps/mm",
"steps/mm*30mm = 12555 steps. ``` Where, ``` (12555/5220) * 418.5 steps/mm = 1007",
"be that the ATmega2560 on my MKS gen 1.4 board got damaged? Or",
"from around 400 steps per mm at 16 micro steps (which did match",
"got a problem that after upgrading my printer to an aluminum frame my",
"16 micro steps (which did match the manufacturer's recommendation perfectly) to a bit",
"16 micro steps. This is a problem for me, since the limited amount",
"and 16 micro steps. This value was working perfectly fine before. ### Update:",
"have the effect of 418.5 steps/mm ...which is, oddly, the exact number that",
"16 micro steps. This value was working perfectly fine before. ### Update: With",
"and I am using the same setup as before! E3D claims to have",
"extrusion (reproducible). ``` It should be ``` 418.5 steps/mm*30mm = 12555 steps. ```",
"it be that the ATmega2560 on my MKS gen 1.4 board got damaged?",
"in EEPROM and in firmware) on a specific amount of extrusion length ```",
"MKS gen 1.4 board got damaged? Or did I change something in the",
"I got ``` 5220 steps for 30mm extrusion (reproducible). ``` It should be",
"of steps per second lower my maximum retraction speed. What I tried since",
"Titan 1:3 geared extruder and I am using the same setup as before!",
"the manufacturer's recommendation perfectly) to a bit over 1000 steps per mm at",
"times too high; 2. Connecting another motor with another cable - the other",
"on different micro steps, of course with other values, but also about 2.5",
"the other motor with nothing attached to it drove the same angle as",
"motor with another cable - the other motor with nothing attached to it",
"as before! E3D claims to have 437 steps per mm on a 200",
"for 30mm extrusion (reproducible). ``` It should be ``` 418.5 steps/mm*30mm = 12555",
"problem for me, since the limited amount of steps per second lower my",
"gen 1.4 board got damaged? Or did I change something in the firmware,",
"steps per mm at 16 micro steps (which did match the manufacturer's recommendation",
"steps, of course with other values, but also about 2.5 times too high;",
"effect of 418.5 steps/mm ...which is, oddly, the exact number that I got",
"1. Replace and adjust the current of the stepper driver - no change,",
"that the ATmega2560 on my MKS gen 1.4 board got damaged? Or did",
"have 437 steps per mm on a 200 steps/revolution Nema 17 stepper and",
"to it drove the same angle as my extruder stepper. Could it be",
"using the same setup as before! E3D claims to have 437 steps per",
"type of driver on different micro steps, of course with other values, but",
"my MKS gen 1.4 board got damaged? Or did I change something in",
"my board sends at 418.5 steps/mm (programmed in EEPROM and in firmware) on",
"manufacturer's recommendation perfectly) to a bit over 1000 steps per mm at 16",
"driver - no change, even with another type of driver on different micro",
"board sends at 418.5 steps/mm (programmed in EEPROM and in firmware) on a",
"the same setup as before! E3D claims to have 437 steps per mm",
"30mm extrusion (reproducible). ``` It should be ``` 418.5 steps/mm*30mm = 12555 steps.",
"angle as my extruder stepper. Could it be that the ATmega2560 on my",
"a 200 steps/revolution Nema 17 stepper and 16 micro steps. This value was",
"nothing attached to it drove the same angle as my extruder stepper. Could",
"a problem for me, since the limited amount of steps per second lower",
"my maximum retraction speed. What I tried since the rebuild: 1. Replace and",
"steps per mm at 16 micro steps. This is a problem for me,",
"maximum retraction speed. What I tried since the rebuild: 1. Replace and adjust",
"bit over 1000 steps per mm at 16 micro steps. This is a",
"of 418.5 steps/mm ...which is, oddly, the exact number that I got by",
"the same angle as my extruder stepper. Could it be that the ATmega2560",
"driver on different micro steps, of course with other values, but also about",
"steps. ``` Where, ``` (12555/5220) * 418.5 steps/mm = 1007 steps/mm ``` to",
"went from around 400 steps per mm at 16 micro steps (which did",
"418.5 steps/mm ...which is, oddly, the exact number that I got by marking",
"a problem that after upgrading my printer to an aluminum frame my extruder",
"I am using Marlin 1.8.5 and a E3D Titan 1:3 geared extruder and",
"sends at 418.5 steps/mm (programmed in EEPROM and in firmware) on a specific",
"this effect? I am using Marlin 1.8.5 and a E3D Titan 1:3 geared",
"E3D Titan 1:3 geared extruder and I am using the same setup as",
"steps. This value was working perfectly fine before. ### Update: With an Arduino",
"it drove the same angle as my extruder stepper. Could it be that",
"have this effect? I am using Marlin 1.8.5 and a E3D Titan 1:3",
"of the stepper driver - no change, even with another type of driver",
"mm on a 200 steps/revolution Nema 17 stepper and 16 micro steps. This",
"printer to an aluminum frame my extruder went from around 400 steps per",
"an aluminum frame my extruder went from around 400 steps per mm at",
"F100 E30 ``` and I got ``` 5220 steps for 30mm extrusion (reproducible).",
"1.4 board got damaged? Or did I change something in the firmware, which",
"before. ### Update: With an Arduino Nano I measured the amount of steps",
"extruder and I am using the same setup as before! E3D claims to",
"was working perfectly fine before. ### Update: With an Arduino Nano I measured",
"5220 steps for 30mm extrusion (reproducible). ``` It should be ``` 418.5 steps/mm*30mm",
"``` 5220 steps for 30mm extrusion (reproducible). ``` It should be ``` 418.5",
"437 steps per mm on a 200 steps/revolution Nema 17 stepper and 16",
"did I change something in the firmware, which does have this effect? I",
"effect? I am using Marlin 1.8.5 and a E3D Titan 1:3 geared extruder",
"(which did match the manufacturer's recommendation perfectly) to a bit over 1000 steps",
"stepper and 16 micro steps. This value was working perfectly fine before. ###",
"- the other motor with nothing attached to it drove the same angle",
"the firmware, which does have this effect? I am using Marlin 1.8.5 and",
"same angle as my extruder stepper. Could it be that the ATmega2560 on",
"high; 2. Connecting another motor with another cable - the other motor with",
"with nothing attached to it drove the same angle as my extruder stepper.",
"1.8.5 and a E3D Titan 1:3 geared extruder and I am using the",
"perfectly) to a bit over 1000 steps per mm at 16 micro steps.",
"amount of steps per second lower my maximum retraction speed. What I tried",
"at 16 micro steps. This is a problem for me, since the limited",
"and adjust the current of the stepper driver - no change, even with",
"micro steps, of course with other values, but also about 2.5 times too",
"a E3D Titan 1:3 geared extruder and I am using the same setup",
"fine before. ### Update: With an Arduino Nano I measured the amount of",
"I tried since the rebuild: 1. Replace and adjust the current of the",
"stepper driver - no change, even with another type of driver on different",
"ATmega2560 on my MKS gen 1.4 board got damaged? Or did I change",
"oddly, the exact number that I got by marking filament, extruding, measuring and",
"mm at 16 micro steps (which did match the manufacturer's recommendation perfectly) to",
"a bit over 1000 steps per mm at 16 micro steps. This is",
"speed. What I tried since the rebuild: 1. Replace and adjust the current",
"to an aluminum frame my extruder went from around 400 steps per mm",
"other values, but also about 2.5 times too high; 2. Connecting another motor",
"as my extruder stepper. Could it be that the ATmega2560 on my MKS",
"am using Marlin 1.8.5 and a E3D Titan 1:3 geared extruder and I",
"E3D claims to have 437 steps per mm on a 200 steps/revolution Nema",
"This value was working perfectly fine before. ### Update: With an Arduino Nano",
"2.5 times too high; 2. Connecting another motor with another cable - the",
"of steps my board sends at 418.5 steps/mm (programmed in EEPROM and in",
"should be ``` 418.5 steps/mm*30mm = 12555 steps. ``` Where, ``` (12555/5220) *",
"* 418.5 steps/mm = 1007 steps/mm ``` to have the effect of 418.5",
"and I got ``` 5220 steps for 30mm extrusion (reproducible). ``` It should",
"= 12555 steps. ``` Where, ``` (12555/5220) * 418.5 steps/mm = 1007 steps/mm",
"to a bit over 1000 steps per mm at 16 micro steps. This",
"my extruder went from around 400 steps per mm at 16 micro steps",
"``` (12555/5220) * 418.5 steps/mm = 1007 steps/mm ``` to have the effect",
"steps. This is a problem for me, since the limited amount of steps",
"since the limited amount of steps per second lower my maximum retraction speed.",
"of course with other values, but also about 2.5 times too high; 2.",
"another cable - the other motor with nothing attached to it drove the",
"``` to have the effect of 418.5 steps/mm ...which is, oddly, the exact",
"### Update: With an Arduino Nano I measured the amount of steps my",
"board got damaged? Or did I change something in the firmware, which does",
"I am using the same setup as before! E3D claims to have 437",
"got damaged? Or did I change something in the firmware, which does have",
"my extruder stepper. Could it be that the ATmega2560 on my MKS gen",
"With an Arduino Nano I measured the amount of steps my board sends",
"values, but also about 2.5 times too high; 2. Connecting another motor with",
"does have this effect? I am using Marlin 1.8.5 and a E3D Titan",
"(programmed in EEPROM and in firmware) on a specific amount of extrusion length",
"micro steps. This is a problem for me, since the limited amount of",
"steps/mm = 1007 steps/mm ``` to have the effect of 418.5 steps/mm ...which",
"limited amount of steps per second lower my maximum retraction speed. What I",
"...which is, oddly, the exact number that I got by marking filament, extruding,",
"on my MKS gen 1.4 board got damaged? Or did I change something",
"I change something in the firmware, which does have this effect? I am",
"and a E3D Titan 1:3 geared extruder and I am using the same",
"and in firmware) on a specific amount of extrusion length ``` G92 E0",
"Nema 17 stepper and 16 micro steps. This value was working perfectly fine",
"over 1000 steps per mm at 16 micro steps. This is a problem",
"the current of the stepper driver - no change, even with another type",
"motor with nothing attached to it drove the same angle as my extruder",
"after upgrading my printer to an aluminum frame my extruder went from around",
"at 16 micro steps (which did match the manufacturer's recommendation perfectly) to a",
"steps (which did match the manufacturer's recommendation perfectly) to a bit over 1000",
"claims to have 437 steps per mm on a 200 steps/revolution Nema 17",
"200 steps/revolution Nema 17 stepper and 16 micro steps. This value was working",
"working perfectly fine before. ### Update: With an Arduino Nano I measured the",
"a specific amount of extrusion length ``` G92 E0 -> G1 F100 E30",
"but also about 2.5 times too high; 2. Connecting another motor with another",
"damaged? Or did I change something in the firmware, which does have this",
"adjust the current of the stepper driver - no change, even with another",
"- no change, even with another type of driver on different micro steps,",
"the effect of 418.5 steps/mm ...which is, oddly, the exact number that I",
"extruder went from around 400 steps per mm at 16 micro steps (which",
"steps/mm ...which is, oddly, the exact number that I got by marking filament,",
"am using the same setup as before! E3D claims to have 437 steps",
"Marlin 1.8.5 and a E3D Titan 1:3 geared extruder and I am using",
"for me, since the limited amount of steps per second lower my maximum",
"Connecting another motor with another cable - the other motor with nothing attached",
"me, since the limited amount of steps per second lower my maximum retraction",
"G1 F100 E30 ``` and I got ``` 5220 steps for 30mm extrusion",
"on a specific amount of extrusion length ``` G92 E0 -> G1 F100",
"rebuild: 1. Replace and adjust the current of the stepper driver - no",
"the amount of steps my board sends at 418.5 steps/mm (programmed in EEPROM",
"second lower my maximum retraction speed. What I tried since the rebuild: 1.",
"with another cable - the other motor with nothing attached to it drove",
"12555 steps. ``` Where, ``` (12555/5220) * 418.5 steps/mm = 1007 steps/mm ```",
"extruder stepper. Could it be that the ATmega2560 on my MKS gen 1.4",
"to have the effect of 418.5 steps/mm ...which is, oddly, the exact number",
"of driver on different micro steps, of course with other values, but also",
"is, oddly, the exact number that I got by marking filament, extruding, measuring",
"the stepper driver - no change, even with another type of driver on",
"tried since the rebuild: 1. Replace and adjust the current of the stepper",
"other motor with nothing attached to it drove the same angle as my",
"Nano I measured the amount of steps my board sends at 418.5 steps/mm",
"current of the stepper driver - no change, even with another type of",
"drove the same angle as my extruder stepper. Could it be that the",
"specific amount of extrusion length ``` G92 E0 -> G1 F100 E30 ```",
"400 steps per mm at 16 micro steps (which did match the manufacturer's",
"418.5 steps/mm (programmed in EEPROM and in firmware) on a specific amount of",
"What I tried since the rebuild: 1. Replace and adjust the current of",
"firmware) on a specific amount of extrusion length ``` G92 E0 -> G1",
"steps for 30mm extrusion (reproducible). ``` It should be ``` 418.5 steps/mm*30mm =",
"since the rebuild: 1. Replace and adjust the current of the stepper driver",
"I have got a problem that after upgrading my printer to an aluminum",
"the limited amount of steps per second lower my maximum retraction speed. What",
"another motor with another cable - the other motor with nothing attached to",
"using Marlin 1.8.5 and a E3D Titan 1:3 geared extruder and I am",
"mm at 16 micro steps. This is a problem for me, since the",
"1000 steps per mm at 16 micro steps. This is a problem for",
"``` Where, ``` (12555/5220) * 418.5 steps/mm = 1007 steps/mm ``` to have",
"with another type of driver on different micro steps, of course with other",
"did match the manufacturer's recommendation perfectly) to a bit over 1000 steps per",
"Could it be that the ATmega2560 on my MKS gen 1.4 board got",
"got ``` 5220 steps for 30mm extrusion (reproducible). ``` It should be ```",
"the exact number that I got by marking filament, extruding, measuring and calculating.",
"418.5 steps/mm = 1007 steps/mm ``` to have the effect of 418.5 steps/mm",
"measured the amount of steps my board sends at 418.5 steps/mm (programmed in",
"extrusion length ``` G92 E0 -> G1 F100 E30 ``` and I got",
"the ATmega2560 on my MKS gen 1.4 board got damaged? Or did I",
"same setup as before! E3D claims to have 437 steps per mm on",
"which does have this effect? I am using Marlin 1.8.5 and a E3D",
"frame my extruder went from around 400 steps per mm at 16 micro",
"attached to it drove the same angle as my extruder stepper. Could it",
"G92 E0 -> G1 F100 E30 ``` and I got ``` 5220 steps",
"that after upgrading my printer to an aluminum frame my extruder went from",
"before! E3D claims to have 437 steps per mm on a 200 steps/revolution",
"to have 437 steps per mm on a 200 steps/revolution Nema 17 stepper",
"upgrading my printer to an aluminum frame my extruder went from around 400",
"on a 200 steps/revolution Nema 17 stepper and 16 micro steps. This value",
"per mm at 16 micro steps. This is a problem for me, since",
"be ``` 418.5 steps/mm*30mm = 12555 steps. ``` Where, ``` (12555/5220) * 418.5",
"EEPROM and in firmware) on a specific amount of extrusion length ``` G92",
"Replace and adjust the current of the stepper driver - no change, even",
"Where, ``` (12555/5220) * 418.5 steps/mm = 1007 steps/mm ``` to have the",
"another type of driver on different micro steps, of course with other values,",
"This is a problem for me, since the limited amount of steps per",
"retraction speed. What I tried since the rebuild: 1. Replace and adjust the",
"per mm on a 200 steps/revolution Nema 17 stepper and 16 micro steps.",
"Arduino Nano I measured the amount of steps my board sends at 418.5"
] |
[
"of all connections and 3 different (electronic ribbon) cables and still can’t fix",
"possible thoughts on why this happens? The extruded motor will move in the",
"the seating of all connections and 3 different (electronic ribbon) cables and still",
"Zortrax M200 has a skipping extruder motor, I’ve checked the seating of all",
"happens? The extruded motor will move in the desired direction and then skip",
"anyone have any possible thoughts on why this happens? The extruded motor will",
"still can’t fix the issue. The gear is clean and have tried fresh",
"gear is clean and have tried fresh filament. * Does anyone have any",
"the issue. The gear is clean and have tried fresh filament. * Does",
"filament. * Does anyone have any possible thoughts on why this happens? The",
"extruded motor will move in the desired direction and then skip back. Loading",
"issue. The gear is clean and have tried fresh filament. * Does anyone",
"different (electronic ribbon) cables and still can’t fix the issue. The gear is",
"the desired direction and then skip back. Loading the filament is fine. Tried",
"desired direction and then skip back. Loading the filament is fine. Tried new",
"all connections and 3 different (electronic ribbon) cables and still can’t fix the",
"(electronic ribbon) cables and still can’t fix the issue. The gear is clean",
"direction and then skip back. Loading the filament is fine. Tried new nozzles,",
"any possible thoughts on why this happens? The extruded motor will move in",
"skip back. Loading the filament is fine. Tried new nozzles, blockages checked, etc.",
"and 3 different (electronic ribbon) cables and still can’t fix the issue. The",
"and still can’t fix the issue. The gear is clean and have tried",
"fresh filament. * Does anyone have any possible thoughts on why this happens?",
"The gear is clean and have tried fresh filament. * Does anyone have",
"this happens? The extruded motor will move in the desired direction and then",
"in the desired direction and then skip back. Loading the filament is fine.",
"can’t fix the issue. The gear is clean and have tried fresh filament.",
"checked the seating of all connections and 3 different (electronic ribbon) cables and",
"M200 has a skipping extruder motor, I’ve checked the seating of all connections",
"have any possible thoughts on why this happens? The extruded motor will move",
"My Zortrax M200 has a skipping extruder motor, I’ve checked the seating of",
"ribbon) cables and still can’t fix the issue. The gear is clean and",
"on why this happens? The extruded motor will move in the desired direction",
"why this happens? The extruded motor will move in the desired direction and",
"move in the desired direction and then skip back. Loading the filament is",
"is clean and have tried fresh filament. * Does anyone have any possible",
"then skip back. Loading the filament is fine. Tried new nozzles, blockages checked,",
"I’ve checked the seating of all connections and 3 different (electronic ribbon) cables",
"a skipping extruder motor, I’ve checked the seating of all connections and 3",
"have tried fresh filament. * Does anyone have any possible thoughts on why",
"tried fresh filament. * Does anyone have any possible thoughts on why this",
"3 different (electronic ribbon) cables and still can’t fix the issue. The gear",
"seating of all connections and 3 different (electronic ribbon) cables and still can’t",
"fix the issue. The gear is clean and have tried fresh filament. *",
"motor, I’ve checked the seating of all connections and 3 different (electronic ribbon)",
"and have tried fresh filament. * Does anyone have any possible thoughts on",
"will move in the desired direction and then skip back. Loading the filament",
"skipping extruder motor, I’ve checked the seating of all connections and 3 different",
"thoughts on why this happens? The extruded motor will move in the desired",
"The extruded motor will move in the desired direction and then skip back.",
"cables and still can’t fix the issue. The gear is clean and have",
"connections and 3 different (electronic ribbon) cables and still can’t fix the issue.",
"Does anyone have any possible thoughts on why this happens? The extruded motor",
"and then skip back. Loading the filament is fine. Tried new nozzles, blockages",
"has a skipping extruder motor, I’ve checked the seating of all connections and",
"extruder motor, I’ve checked the seating of all connections and 3 different (electronic",
"* Does anyone have any possible thoughts on why this happens? The extruded",
"motor will move in the desired direction and then skip back. Loading the",
"clean and have tried fresh filament. * Does anyone have any possible thoughts"
] |
[
"have a question about Slic3r software. I would like to subtract two parts.",
"to subtract two parts. For example, I have an STL model, when I",
"right click on the part, I can select **Settings...**, and in the **Settings**",
"proper thickness. Now we have two parts where one of them is inside",
"example, I have an STL model, when I right click on the part,",
"I can select **Settings...**, and in the **Settings** window, I can select modifier",
"software. I would like to subtract two parts. For example, I have an",
"I can select slab.with selecting proper thickness. Now we have two parts where",
"click on the part, I can select **Settings...**, and in the **Settings** window,",
"I would like to subtract two parts. For example, I have an STL",
"in the **Settings** window, I can select modifier and I can select slab.with",
"parts where one of them is inside of another. My problem is subtracting",
"window, I can select modifier and I can select slab.with selecting proper thickness.",
"another. My problem is subtracting those two parts. How can I subtract this",
"I right click on the part, I can select **Settings...**, and in the",
"I have a question about Slic3r software. I would like to subtract two",
"select slab.with selecting proper thickness. Now we have two parts where one of",
"selecting proper thickness. Now we have two parts where one of them is",
"like to subtract two parts. For example, I have an STL model, when",
"one of them is inside of another. My problem is subtracting those two",
"question about Slic3r software. I would like to subtract two parts. For example,",
"two parts where one of them is inside of another. My problem is",
"and I can select slab.with selecting proper thickness. Now we have two parts",
"Now we have two parts where one of them is inside of another.",
"of them is inside of another. My problem is subtracting those two parts.",
"inside of another. My problem is subtracting those two parts. How can I",
"we have two parts where one of them is inside of another. My",
"of another. My problem is subtracting those two parts. How can I subtract",
"can select slab.with selecting proper thickness. Now we have two parts where one",
"thickness. Now we have two parts where one of them is inside of",
"the part, I can select **Settings...**, and in the **Settings** window, I can",
"I can select modifier and I can select slab.with selecting proper thickness. Now",
"would like to subtract two parts. For example, I have an STL model,",
"I have an STL model, when I right click on the part, I",
"is inside of another. My problem is subtracting those two parts. How can",
"an STL model, when I right click on the part, I can select",
"can select modifier and I can select slab.with selecting proper thickness. Now we",
"My problem is subtracting those two parts. How can I subtract this part",
"problem is subtracting those two parts. How can I subtract this part from",
"on the part, I can select **Settings...**, and in the **Settings** window, I",
"**Settings** window, I can select modifier and I can select slab.with selecting proper",
"parts. For example, I have an STL model, when I right click on",
"the **Settings** window, I can select modifier and I can select slab.with selecting",
"have two parts where one of them is inside of another. My problem",
"STL model, when I right click on the part, I can select **Settings...**,",
"slab.with selecting proper thickness. Now we have two parts where one of them",
"is subtracting those two parts. How can I subtract this part from another?",
"a question about Slic3r software. I would like to subtract two parts. For",
"subtract two parts. For example, I have an STL model, when I right",
"select modifier and I can select slab.with selecting proper thickness. Now we have",
"**Settings...**, and in the **Settings** window, I can select modifier and I can",
"when I right click on the part, I can select **Settings...**, and in",
"where one of them is inside of another. My problem is subtracting those",
"can select **Settings...**, and in the **Settings** window, I can select modifier and",
"model, when I right click on the part, I can select **Settings...**, and",
"For example, I have an STL model, when I right click on the",
"about Slic3r software. I would like to subtract two parts. For example, I",
"two parts. For example, I have an STL model, when I right click",
"have an STL model, when I right click on the part, I can",
"select **Settings...**, and in the **Settings** window, I can select modifier and I",
"and in the **Settings** window, I can select modifier and I can select",
"them is inside of another. My problem is subtracting those two parts. How",
"Slic3r software. I would like to subtract two parts. For example, I have",
"part, I can select **Settings...**, and in the **Settings** window, I can select",
"modifier and I can select slab.with selecting proper thickness. Now we have two"
] |
[
"\"CURA settings - Printer\")](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\") **Extruder** [![CURA settings - Extruder](https://i.stack.imgur.com/SfRst.png",
"for adhesion\") These are my CURA settings: **Printer** [![CURA settings - Printer](https://i.stack.imgur.com/CaqvA.png \"CURA",
"problem I noticed is that the printing is starting on one corner instead",
"able to auto-home successfully, but this is the problem I'm having: I tried",
"as specified on the Printer Settings in CURA (check settings below). Second problem",
"I have a couple of hours of experience in 3D Printing so I'm",
"assembled the Creality3D Ender-4 kit a couple of days ago. I completed some",
"but I honestly don't know how to proceed with this. I have a",
"experience in 3D Printing so I'm completely lost. This is the result I",
"printed with Raft for adhesion\")](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft for adhesion\") These are",
"just assembled the Creality3D Ender-4 kit a couple of days ago. I completed",
"Raft for adhesion](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft for adhesion\")](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft",
"know but I honestly don't know how to proceed with this. I have",
"noticed is that the printing is starting on one corner instead of the",
"with this. I have a couple of hours of experience in 3D Printing",
"I'm getting significant distortion. The movement of the printer seems to be fine,",
"Settings in CURA (check settings below). Second problem is that I'm getting significant",
"days ago. I completed some rewiring and everything seems to be wired correctly,",
"is that the printing is starting on one corner instead of the center",
"the problem I'm having: I tried printing a [calibration cube](https://makerware.thingiverse.com/thing:1278865). The first problem",
"to be fine, no jerks of weird sounds. I tried all I know",
"3D Printing so I'm completely lost. This is the result I got (Model",
"printed with Raft for adhesion): [![Model printed with Raft for adhesion](https://i.stack.imgur.com/qXkCz.png \"Model printed",
"don't know how to proceed with this. I have a couple of hours",
"adhesion\") These are my CURA settings: **Printer** [![CURA settings - Printer](https://i.stack.imgur.com/CaqvA.png \"CURA settings",
"movement of the printer seems to be fine, no jerks of weird sounds.",
"with Raft for adhesion\") These are my CURA settings: **Printer** [![CURA settings -",
"Printer Settings in CURA (check settings below). Second problem is that I'm getting",
"(check settings below). Second problem is that I'm getting significant distortion. The movement",
"got (Model printed with Raft for adhesion): [![Model printed with Raft for adhesion](https://i.stack.imgur.com/qXkCz.png",
"Printer\") **Extruder** [![CURA settings - Extruder](https://i.stack.imgur.com/SfRst.png \"CURA settings - Extruder\")](https://i.stack.imgur.com/SfRst.png \"CURA settings -",
"that I'm getting significant distortion. The movement of the printer seems to be",
"the printer seems to be fine, no jerks of weird sounds. I tried",
"all I know but I honestly don't know how to proceed with this.",
"I'm having: I tried printing a [calibration cube](https://makerware.thingiverse.com/thing:1278865). The first problem I noticed",
"[calibration cube](https://makerware.thingiverse.com/thing:1278865). The first problem I noticed is that the printing is starting",
"below). Second problem is that I'm getting significant distortion. The movement of the",
"the result I got (Model printed with Raft for adhesion): [. The first problem I",
"couple of hours of experience in 3D Printing so I'm completely lost. This",
"CURA (check settings below). Second problem is that I'm getting significant distortion. The",
"**Printer** [![CURA settings - Printer](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\")](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\")",
"for adhesion): [![Model printed with Raft for adhesion](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft for",
"center as specified on the Printer Settings in CURA (check settings below). Second",
"of hours of experience in 3D Printing so I'm completely lost. This is",
"the Creality3D Ender-4 kit a couple of days ago. I completed some rewiring",
"proceed with this. I have a couple of hours of experience in 3D",
"is the result I got (Model printed with Raft for adhesion): [. The first",
"problem is that I'm getting significant distortion. The movement of the printer seems",
"Raft for adhesion): [![Model printed with Raft for adhesion](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft",
"honestly don't know how to proceed with this. I have a couple of",
"this is the problem I'm having: I tried printing a [calibration cube](https://makerware.thingiverse.com/thing:1278865). The",
"tried all I know but I honestly don't know how to proceed with",
"completely lost. This is the result I got (Model printed with Raft for",
"this. I have a couple of hours of experience in 3D Printing so",
"couple of days ago. I completed some rewiring and everything seems to be",
"- Printer](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\")](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\") **Extruder** [![CURA settings",
"I'm completely lost. This is the result I got (Model printed with Raft",
"printed with Raft for adhesion\") These are my CURA settings: **Printer** [![CURA settings",
"Ender-4 kit a couple of days ago. I completed some rewiring and everything",
"distortion. The movement of the printer seems to be fine, no jerks of",
"I honestly don't know how to proceed with this. I have a couple",
"result I got (Model printed with Raft for adhesion): [![Model printed with Raft",
"fine, no jerks of weird sounds. I tried all I know but I",
"auto-home successfully, but this is the problem I'm having: I tried printing a",
"I'm able to auto-home successfully, but this is the problem I'm having: I",
"is that I'm getting significant distortion. The movement of the printer seems to",
"significant distortion. The movement of the printer seems to be fine, no jerks",
"seems to be fine, no jerks of weird sounds. I tried all I",
"my CURA settings: **Printer** [![CURA settings - Printer](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\")](https://i.stack.imgur.com/CaqvA.png \"CURA",
"jerks of weird sounds. I tried all I know but I honestly don't",
"in CURA (check settings below). Second problem is that I'm getting significant distortion.",
"corner instead of the center as specified on the Printer Settings in CURA",
"of weird sounds. I tried all I know but I honestly don't know",
"CURA settings: **Printer** [![CURA settings - Printer](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\")](https://i.stack.imgur.com/CaqvA.png \"CURA settings",
"with Raft for adhesion](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft for adhesion\")](https://i.stack.imgur.com/qXkCz.png \"Model printed with",
"wired correctly, I'm able to auto-home successfully, but this is the problem I'm",
"I know but I honestly don't know how to proceed with this. I",
"These are my CURA settings: **Printer** [![CURA settings - Printer](https://i.stack.imgur.com/CaqvA.png \"CURA settings -",
"for adhesion\")](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft for adhesion\") These are my CURA settings:",
"are my CURA settings: **Printer** [![CURA settings - Printer](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\")](https://i.stack.imgur.com/CaqvA.png",
"\"Model printed with Raft for adhesion\") These are my CURA settings: **Printer** [![CURA",
"be fine, no jerks of weird sounds. I tried all I know but",
"of the center as specified on the Printer Settings in CURA (check settings",
"on the Printer Settings in CURA (check settings below). Second problem is that",
"of experience in 3D Printing so I'm completely lost. This is the result",
"settings - Printer\") **Extruder** [![CURA settings - Extruder](https://i.stack.imgur.com/SfRst.png \"CURA settings - Extruder\")](https://i.stack.imgur.com/SfRst.png \"CURA",
"printing is starting on one corner instead of the center as specified on",
"Printing so I'm completely lost. This is the result I got (Model printed",
"everything seems to be wired correctly, I'm able to auto-home successfully, but this",
"I noticed is that the printing is starting on one corner instead of",
"instead of the center as specified on the Printer Settings in CURA (check",
"kit a couple of days ago. I completed some rewiring and everything seems",
"getting significant distortion. The movement of the printer seems to be fine, no",
"- Printer\") **Extruder** [![CURA settings - Extruder](https://i.stack.imgur.com/SfRst.png \"CURA settings - Extruder\")](https://i.stack.imgur.com/SfRst.png \"CURA settings",
"with Raft for adhesion\")](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft for adhesion\") These are my",
"The movement of the printer seems to be fine, no jerks of weird",
"for adhesion](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft for adhesion\")](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft for",
"settings - Printer](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\")](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\") **Extruder** [.",
"(Model printed with Raft for adhesion): [![Model printed with Raft for adhesion](https://i.stack.imgur.com/qXkCz.png \"Model",
"hours of experience in 3D Printing so I'm completely lost. This is the",
"on one corner instead of the center as specified on the Printer Settings",
"know how to proceed with this. I have a couple of hours of",
"how to proceed with this. I have a couple of hours of experience",
"to proceed with this. I have a couple of hours of experience in",
"so I'm completely lost. This is the result I got (Model printed with",
"\"CURA settings - Printer\") **Extruder** [![CURA settings - Extruder](https://i.stack.imgur.com/SfRst.png \"CURA settings - Extruder\")](https://i.stack.imgur.com/SfRst.png",
"specified on the Printer Settings in CURA (check settings below). Second problem is",
"cube](https://makerware.thingiverse.com/thing:1278865). The first problem I noticed is that the printing is starting on",
"I tried all I know but I honestly don't know how to proceed",
"be wired correctly, I'm able to auto-home successfully, but this is the problem",
"**Extruder** [![CURA settings - Extruder](https://i.stack.imgur.com/SfRst.png \"CURA settings - Extruder\")](https://i.stack.imgur.com/SfRst.png \"CURA settings - Extruder\")",
"Second problem is that I'm getting significant distortion. The movement of the printer",
"seems to be wired correctly, I'm able to auto-home successfully, but this is",
"lost. This is the result I got (Model printed with Raft for adhesion):",
"[![Model printed with Raft for adhesion](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft for adhesion\")](https://i.stack.imgur.com/qXkCz.png \"Model",
"adhesion](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft for adhesion\")](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft for adhesion\")",
"first problem I noticed is that the printing is starting on one corner",
"Printer](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\")](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\") **Extruder** [![CURA settings -",
"a couple of hours of experience in 3D Printing so I'm completely lost.",
"settings - Printer\")](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\") **Extruder** [![CURA settings - Extruder](https://i.stack.imgur.com/SfRst.png \"CURA",
"ago. I completed some rewiring and everything seems to be wired correctly, I'm",
"the printing is starting on one corner instead of the center as specified",
"This is the result I got (Model printed with Raft for adhesion): [![Model",
"rewiring and everything seems to be wired correctly, I'm able to auto-home successfully,",
"settings: **Printer** [![CURA settings - Printer](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\")](https://i.stack.imgur.com/CaqvA.png \"CURA settings -",
"I completed some rewiring and everything seems to be wired correctly, I'm able",
"weird sounds. I tried all I know but I honestly don't know how",
"completed some rewiring and everything seems to be wired correctly, I'm able to",
"no jerks of weird sounds. I tried all I know but I honestly",
"starting on one corner instead of the center as specified on the Printer",
"some rewiring and everything seems to be wired correctly, I'm able to auto-home",
"printing a [calibration cube](https://makerware.thingiverse.com/thing:1278865). The first problem I noticed is that the printing",
"- Printer\")](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\") **Extruder** [![CURA settings - Extruder](https://i.stack.imgur.com/SfRst.png \"CURA settings",
"settings below). Second problem is that I'm getting significant distortion. The movement of",
"in 3D Printing so I'm completely lost. This is the result I got",
"I tried printing a [calibration cube](https://makerware.thingiverse.com/thing:1278865). The first problem I noticed is that",
"successfully, but this is the problem I'm having: I tried printing a [calibration",
"have just assembled the Creality3D Ender-4 kit a couple of days ago. I",
"correctly, I'm able to auto-home successfully, but this is the problem I'm having:",
"printed with Raft for adhesion](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft for adhesion\")](https://i.stack.imgur.com/qXkCz.png \"Model printed",
"a couple of days ago. I completed some rewiring and everything seems to",
"and everything seems to be wired correctly, I'm able to auto-home successfully, but",
"printer seems to be fine, no jerks of weird sounds. I tried all",
"the Printer Settings in CURA (check settings below). Second problem is that I'm",
"[![CURA settings - Printer](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\")](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\") **Extruder**",
"is starting on one corner instead of the center as specified on the",
"to be wired correctly, I'm able to auto-home successfully, but this is the",
"of days ago. I completed some rewiring and everything seems to be wired",
"having: I tried printing a [calibration cube](https://makerware.thingiverse.com/thing:1278865). The first problem I noticed is",
"that the printing is starting on one corner instead of the center as",
"I got (Model printed with Raft for adhesion): [![Model printed with Raft for",
"Printer\")](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\") **Extruder** [![CURA settings - Extruder](https://i.stack.imgur.com/SfRst.png \"CURA settings -",
"sounds. I tried all I know but I honestly don't know how to",
"to auto-home successfully, but this is the problem I'm having: I tried printing",
"Raft for adhesion\")](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft for adhesion\") These are my CURA",
"adhesion\")](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft for adhesion\") These are my CURA settings: **Printer**",
"I have just assembled the Creality3D Ender-4 kit a couple of days ago.",
"with Raft for adhesion): [![Model printed with Raft for adhesion](https://i.stack.imgur.com/qXkCz.png \"Model printed with",
"the center as specified on the Printer Settings in CURA (check settings below).",
"\"Model printed with Raft for adhesion\")](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft for adhesion\") These",
"Raft for adhesion\") These are my CURA settings: **Printer** [![CURA settings - Printer](https://i.stack.imgur.com/CaqvA.png",
"of the printer seems to be fine, no jerks of weird sounds. I",
"tried printing a [calibration cube](https://makerware.thingiverse.com/thing:1278865). The first problem I noticed is that the",
"a [calibration cube](https://makerware.thingiverse.com/thing:1278865). The first problem I noticed is that the printing is",
"adhesion): [![Model printed with Raft for adhesion](https://i.stack.imgur.com/qXkCz.png \"Model printed with Raft for adhesion\")](https://i.stack.imgur.com/qXkCz.png",
"The first problem I noticed is that the printing is starting on one"
] |
[
"In Cura, I tried to add a printer many times and this message",
"driver that came with it, `CH341SER_MAC`, turned on the printer, connect USB cable,",
"> In OSX, I discover in System Information, an **USB2.0-Serial**, that I think",
"an **USB2.0-Serial**, that I think can be the printer. Is it a printer",
"message always appears > > The printer isn't connected. > > > In",
"Information, an **USB2.0-Serial**, that I think can be the printer. Is it a",
"discover in System Information, an **USB2.0-Serial**, that I think can be the printer.",
"my Anet A8, tested everything and apparently it was ok. I installed the",
"many times and this message always appears > > The printer isn't connected.",
"A8, tested everything and apparently it was ok. I installed the driver that",
"times and this message always appears > > The printer isn't connected. >",
"Cura setting? I'm completely lost... [![OSX System Information - USB](https://i.stack.imgur.com/wyfZ6.png \"OSX System Information",
"I installed the driver that came with it, `CH341SER_MAC`, turned on the printer,",
"[![OSX System Information - USB](https://i.stack.imgur.com/wyfZ6.png \"OSX System Information - USB\")](https://i.stack.imgur.com/wyfZ6.png \"OSX System Information",
"isn't connected. > > > In OSX, I discover in System Information, an",
"mount of my Anet A8, tested everything and apparently it was ok. I",
"it, `CH341SER_MAC`, turned on the printer, connect USB cable, but nothing happened. In",
"apparently it was ok. I installed the driver that came with it, `CH341SER_MAC`,",
"ok. I installed the driver that came with it, `CH341SER_MAC`, turned on the",
"in System Information, an **USB2.0-Serial**, that I think can be the printer. Is",
"with it, `CH341SER_MAC`, turned on the printer, connect USB cable, but nothing happened.",
"tested everything and apparently it was ok. I installed the driver that came",
"**USB2.0-Serial**, that I think can be the printer. Is it a printer driver",
"but nothing happened. In Cura, I tried to add a printer many times",
"> The printer isn't connected. > > > In OSX, I discover in",
"I'm completely lost... [![OSX System Information - USB](https://i.stack.imgur.com/wyfZ6.png \"OSX System Information - USB\")](https://i.stack.imgur.com/wyfZ6.png",
"the Cura setting? I'm completely lost... [![OSX System Information - USB](https://i.stack.imgur.com/wyfZ6.png \"OSX System",
"connect USB cable, but nothing happened. In Cura, I tried to add a",
"I discover in System Information, an **USB2.0-Serial**, that I think can be the",
"appears > > The printer isn't connected. > > > In OSX, I",
"turned on the printer, connect USB cable, but nothing happened. In Cura, I",
"> > The printer isn't connected. > > > In OSX, I discover",
"printer. Is it a printer driver problem? Is it the Cura setting? I'm",
"connected. > > > In OSX, I discover in System Information, an **USB2.0-Serial**,",
"it a printer driver problem? Is it the Cura setting? I'm completely lost...",
"the driver that came with it, `CH341SER_MAC`, turned on the printer, connect USB",
"and apparently it was ok. I installed the driver that came with it,",
"it was ok. I installed the driver that came with it, `CH341SER_MAC`, turned",
"everything and apparently it was ok. I installed the driver that came with",
"printer, connect USB cable, but nothing happened. In Cura, I tried to add",
"driver problem? Is it the Cura setting? I'm completely lost... [![OSX System Information",
"Is it the Cura setting? I'm completely lost... [![OSX System Information - USB](https://i.stack.imgur.com/wyfZ6.png",
"Anet A8, tested everything and apparently it was ok. I installed the driver",
"to add a printer many times and this message always appears > >",
"I think can be the printer. Is it a printer driver problem? Is",
"printer driver problem? Is it the Cura setting? I'm completely lost... [![OSX System",
"installed the driver that came with it, `CH341SER_MAC`, turned on the printer, connect",
"be the printer. Is it a printer driver problem? Is it the Cura",
"finished the mount of my Anet A8, tested everything and apparently it was",
"lost... [![OSX System Information - USB](https://i.stack.imgur.com/wyfZ6.png \"OSX System Information - USB\")](https://i.stack.imgur.com/wyfZ6.png \"OSX System",
"a printer many times and this message always appears > > The printer",
"think can be the printer. Is it a printer driver problem? Is it",
"In OSX, I discover in System Information, an **USB2.0-Serial**, that I think can",
"this message always appears > > The printer isn't connected. > > >",
"I tried to add a printer many times and this message always appears",
"Cura, I tried to add a printer many times and this message always",
"and this message always appears > > The printer isn't connected. > >",
"was ok. I installed the driver that came with it, `CH341SER_MAC`, turned on",
"System Information - USB](https://i.stack.imgur.com/wyfZ6.png \"OSX System Information - USB\")](https://i.stack.imgur.com/wyfZ6.png \"OSX System Information -",
"of my Anet A8, tested everything and apparently it was ok. I installed",
"I finished the mount of my Anet A8, tested everything and apparently it",
"cable, but nothing happened. In Cura, I tried to add a printer many",
"that came with it, `CH341SER_MAC`, turned on the printer, connect USB cable, but",
"nothing happened. In Cura, I tried to add a printer many times and",
"the printer. Is it a printer driver problem? Is it the Cura setting?",
"printer isn't connected. > > > In OSX, I discover in System Information,",
"came with it, `CH341SER_MAC`, turned on the printer, connect USB cable, but nothing",
"add a printer many times and this message always appears > > The",
"it the Cura setting? I'm completely lost... [![OSX System Information - USB](https://i.stack.imgur.com/wyfZ6.png \"OSX",
"completely lost... [![OSX System Information - USB](https://i.stack.imgur.com/wyfZ6.png \"OSX System Information - USB\")](https://i.stack.imgur.com/wyfZ6.png \"OSX",
"the mount of my Anet A8, tested everything and apparently it was ok.",
"setting? I'm completely lost... [![OSX System Information - USB](https://i.stack.imgur.com/wyfZ6.png \"OSX System Information -",
"that I think can be the printer. Is it a printer driver problem?",
"the printer, connect USB cable, but nothing happened. In Cura, I tried to",
"happened. In Cura, I tried to add a printer many times and this",
"System Information, an **USB2.0-Serial**, that I think can be the printer. Is it",
"> > In OSX, I discover in System Information, an **USB2.0-Serial**, that I",
"printer many times and this message always appears > > The printer isn't",
"Is it a printer driver problem? Is it the Cura setting? I'm completely",
"on the printer, connect USB cable, but nothing happened. In Cura, I tried",
"always appears > > The printer isn't connected. > > > In OSX,",
"a printer driver problem? Is it the Cura setting? I'm completely lost... [![OSX",
"`CH341SER_MAC`, turned on the printer, connect USB cable, but nothing happened. In Cura,",
"OSX, I discover in System Information, an **USB2.0-Serial**, that I think can be",
"> > > In OSX, I discover in System Information, an **USB2.0-Serial**, that",
"The printer isn't connected. > > > In OSX, I discover in System",
"Information - USB](https://i.stack.imgur.com/wyfZ6.png \"OSX System Information - USB\")](https://i.stack.imgur.com/wyfZ6.png \"OSX System Information - USB\")",
"USB cable, but nothing happened. In Cura, I tried to add a printer",
"tried to add a printer many times and this message always appears >",
"can be the printer. Is it a printer driver problem? Is it the",
"problem? Is it the Cura setting? I'm completely lost... [![OSX System Information -"
] |
[
"has been connected to that stepper for five months now. Using an Ohm",
"now. Using an Ohm meter to check I found that the [10amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0451010MRL?qs=sGAEpiMZZMtxU2g%2F1juGqdRmCQF0%252bT4VCAcmqQZMjh4%3D)",
"to the power pins had blown on both drivers connected to the NEMA",
"pulse/rev of 400, and both are connected to a 24v PSU. **My question",
"should I solder in a [15amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0476015MRSN?qs=sGAEpiMZZMtxU2g%2F1juGqTi%252bNtKN7qu4p8sgPytjpHvp9IQs9yJn3A%3D%3D) LittleFuse to better help the power",
"of 1.69 and a pulse/rev of 400, and both are connected to a",
"order to run two NEMA 17 steppers. After about five days of use",
"had gone out on both drivers. The DQ542MA driver running my NEMA 23",
"stepper for five months now. Using an Ohm meter to check I found",
"the same fuse. I don't understand why the NEMA 17 steppers blew the",
"as how both are properly set to a RMS of 1.69 and a",
"pins on the motherboard and connecting and resetting it to work with one",
"to a RMS of 1.69 and a pulse/rev of 400, and both are",
"it from the NEMA 23 stepper and corresponding pins on the motherboard and",
"that the green indicator light had gone out on both drivers. The DQ542MA",
"NEMA 23 High Torque stepper was still running and it has been connected",
"drivers connected to the NEMA 17 steppers cutting off the power. I decided",
"disconnecting it from the NEMA 23 stepper and corresponding pins on the motherboard",
"an Ohm meter to check I found that the [10amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0451010MRL?qs=sGAEpiMZZMtxU2g%2F1juGqdRmCQF0%252bT4VCAcmqQZMjh4%3D) LittleFuse connected",
"gone out on both drivers. The DQ542MA driver running my NEMA 23 High",
"check I found that the [10amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0451010MRL?qs=sGAEpiMZZMtxU2g%2F1juGqdRmCQF0%252bT4VCAcmqQZMjh4%3D) LittleFuse connected to the power pins",
"on both drivers connected to the NEMA 17 steppers cutting off the power.",
"in order to run two NEMA 17 steppers. After about five days of",
"17 steppers cutting off the power. I decided to test the still working",
"my printer back on, the still working stepper (now attached to the NEMA",
"one of the NEMA 17 steppers. The minute I turned my printer back",
"steppers. After about five days of use I noticed that the green indicator",
"driver by disconnecting it from the NEMA 23 stepper and corresponding pins on",
"with one of the NEMA 17 steppers. The minute I turned my printer",
"stepper was still running and it has been connected to that stepper for",
"working driver by disconnecting it from the NEMA 23 stepper and corresponding pins",
"**My question is:** \"When I fix the drivers should I solder in a",
"steppers cutting off the power. I decided to test the still working driver",
"still working stepper (now attached to the NEMA 17 stepper) immediately blew the",
"steppers blew the fuses of the drivers, seeing as how both are properly",
"NEMA 17 steppers. After about five days of use I noticed that the",
"test the still working driver by disconnecting it from the NEMA 23 stepper",
"fuses of the drivers, seeing as how both are properly set to a",
"I noticed that the green indicator light had gone out on both drivers.",
"I don't understand why the NEMA 17 steppers blew the fuses of the",
"back on, the still working stepper (now attached to the NEMA 17 stepper)",
"drivers in order to run two NEMA 17 steppers. After about five days",
"DQ542MA driver running my NEMA 23 High Torque stepper was still running and",
"connected to the NEMA 17 steppers cutting off the power. I decided to",
"green indicator light had gone out on both drivers. The DQ542MA driver running",
"I turned my printer back on, the still working stepper (now attached to",
"a 24v PSU. **My question is:** \"When I fix the drivers should I",
"[10amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0451010MRL?qs=sGAEpiMZZMtxU2g%2F1juGqdRmCQF0%252bT4VCAcmqQZMjh4%3D) LittleFuse connected to the power pins had blown on both drivers",
"still running and it has been connected to that stepper for five months",
"for five months now. Using an Ohm meter to check I found that",
"to check I found that the [10amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0451010MRL?qs=sGAEpiMZZMtxU2g%2F1juGqdRmCQF0%252bT4VCAcmqQZMjh4%3D) LittleFuse connected to the power",
"LittleFuse to better help the power flow and prevent any further blown fuses?\"",
"the motherboard and connecting and resetting it to work with one of the",
"power. I decided to test the still working driver by disconnecting it from",
"properly set to a RMS of 1.69 and a pulse/rev of 400, and",
"light had gone out on both drivers. The DQ542MA driver running my NEMA",
"I found that the [10amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0451010MRL?qs=sGAEpiMZZMtxU2g%2F1juGqdRmCQF0%252bT4VCAcmqQZMjh4%3D) LittleFuse connected to the power pins had",
"24v PSU. **My question is:** \"When I fix the drivers should I solder",
"connecting and resetting it to work with one of the NEMA 17 steppers.",
"corresponding pins on the motherboard and connecting and resetting it to work with",
"of the NEMA 17 steppers. The minute I turned my printer back on,",
"125v](https://www.mouser.com/ProductDetail/Littelfuse/0476015MRSN?qs=sGAEpiMZZMtxU2g%2F1juGqTi%252bNtKN7qu4p8sgPytjpHvp9IQs9yJn3A%3D%3D) LittleFuse to better help the power flow and prevent any further blown",
"\"When I fix the drivers should I solder in a [15amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0476015MRSN?qs=sGAEpiMZZMtxU2g%2F1juGqTi%252bNtKN7qu4p8sgPytjpHvp9IQs9yJn3A%3D%3D) LittleFuse",
"driver running my NEMA 23 High Torque stepper was still running and it",
"both drivers connected to the NEMA 17 steppers cutting off the power. I",
"the green indicator light had gone out on both drivers. The DQ542MA driver",
"that the [10amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0451010MRL?qs=sGAEpiMZZMtxU2g%2F1juGqdRmCQF0%252bT4VCAcmqQZMjh4%3D) LittleFuse connected to the power pins had blown on",
"to a 24v PSU. **My question is:** \"When I fix the drivers should",
"I fix the drivers should I solder in a [15amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0476015MRSN?qs=sGAEpiMZZMtxU2g%2F1juGqTi%252bNtKN7qu4p8sgPytjpHvp9IQs9yJn3A%3D%3D) LittleFuse to",
"indicator light had gone out on both drivers. The DQ542MA driver running my",
"seeing as how both are properly set to a RMS of 1.69 and",
"purchased two DQ542MA drivers in order to run two NEMA 17 steppers. After",
"125v](https://www.mouser.com/ProductDetail/Littelfuse/0451010MRL?qs=sGAEpiMZZMtxU2g%2F1juGqdRmCQF0%252bT4VCAcmqQZMjh4%3D) LittleFuse connected to the power pins had blown on both drivers connected",
"from the NEMA 23 stepper and corresponding pins on the motherboard and connecting",
"I purchased two DQ542MA drivers in order to run two NEMA 17 steppers.",
"and resetting it to work with one of the NEMA 17 steppers. The",
"fuse. I don't understand why the NEMA 17 steppers blew the fuses of",
"decided to test the still working driver by disconnecting it from the NEMA",
"RMS of 1.69 and a pulse/rev of 400, and both are connected to",
"had blown on both drivers connected to the NEMA 17 steppers cutting off",
"of the drivers, seeing as how both are properly set to a RMS",
"out on both drivers. The DQ542MA driver running my NEMA 23 High Torque",
"months now. Using an Ohm meter to check I found that the [10amp",
"the NEMA 23 stepper and corresponding pins on the motherboard and connecting and",
"fix the drivers should I solder in a [15amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0476015MRSN?qs=sGAEpiMZZMtxU2g%2F1juGqTi%252bNtKN7qu4p8sgPytjpHvp9IQs9yJn3A%3D%3D) LittleFuse to better",
"the [10amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0451010MRL?qs=sGAEpiMZZMtxU2g%2F1juGqdRmCQF0%252bT4VCAcmqQZMjh4%3D) LittleFuse connected to the power pins had blown on both",
"minute I turned my printer back on, the still working stepper (now attached",
"run two NEMA 17 steppers. After about five days of use I noticed",
"off the power. I decided to test the still working driver by disconnecting",
"was still running and it has been connected to that stepper for five",
"LittleFuse connected to the power pins had blown on both drivers connected to",
"NEMA 17 steppers cutting off the power. I decided to test the still",
"are connected to a 24v PSU. **My question is:** \"When I fix the",
"a [15amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0476015MRSN?qs=sGAEpiMZZMtxU2g%2F1juGqTi%252bNtKN7qu4p8sgPytjpHvp9IQs9yJn3A%3D%3D) LittleFuse to better help the power flow and prevent any",
"how both are properly set to a RMS of 1.69 and a pulse/rev",
"of 400, and both are connected to a 24v PSU. **My question is:**",
"Torque stepper was still running and it has been connected to that stepper",
"to the NEMA 17 stepper) immediately blew the same fuse. I don't understand",
"blew the same fuse. I don't understand why the NEMA 17 steppers blew",
"23 High Torque stepper was still running and it has been connected to",
"attached to the NEMA 17 stepper) immediately blew the same fuse. I don't",
"the NEMA 17 stepper) immediately blew the same fuse. I don't understand why",
"that stepper for five months now. Using an Ohm meter to check I",
"Using an Ohm meter to check I found that the [10amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0451010MRL?qs=sGAEpiMZZMtxU2g%2F1juGqdRmCQF0%252bT4VCAcmqQZMjh4%3D) LittleFuse",
"drivers, seeing as how both are properly set to a RMS of 1.69",
"found that the [10amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0451010MRL?qs=sGAEpiMZZMtxU2g%2F1juGqdRmCQF0%252bT4VCAcmqQZMjh4%3D) LittleFuse connected to the power pins had blown",
"been connected to that stepper for five months now. Using an Ohm meter",
"and it has been connected to that stepper for five months now. Using",
"17 stepper) immediately blew the same fuse. I don't understand why the NEMA",
"noticed that the green indicator light had gone out on both drivers. The",
"why the NEMA 17 steppers blew the fuses of the drivers, seeing as",
"DQ542MA drivers in order to run two NEMA 17 steppers. After about five",
"question is:** \"When I fix the drivers should I solder in a [15amp",
"pins had blown on both drivers connected to the NEMA 17 steppers cutting",
"use I noticed that the green indicator light had gone out on both",
"High Torque stepper was still running and it has been connected to that",
"working stepper (now attached to the NEMA 17 stepper) immediately blew the same",
"and both are connected to a 24v PSU. **My question is:** \"When I",
"blew the fuses of the drivers, seeing as how both are properly set",
"stepper (now attached to the NEMA 17 stepper) immediately blew the same fuse.",
"17 steppers blew the fuses of the drivers, seeing as how both are",
"power pins had blown on both drivers connected to the NEMA 17 steppers",
"blown on both drivers connected to the NEMA 17 steppers cutting off the",
"in a [15amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0476015MRSN?qs=sGAEpiMZZMtxU2g%2F1juGqTi%252bNtKN7qu4p8sgPytjpHvp9IQs9yJn3A%3D%3D) LittleFuse to better help the power flow and prevent",
"I solder in a [15amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0476015MRSN?qs=sGAEpiMZZMtxU2g%2F1juGqTi%252bNtKN7qu4p8sgPytjpHvp9IQs9yJn3A%3D%3D) LittleFuse to better help the power flow",
"same fuse. I don't understand why the NEMA 17 steppers blew the fuses",
"the NEMA 17 steppers blew the fuses of the drivers, seeing as how",
"The DQ542MA driver running my NEMA 23 High Torque stepper was still running",
"the drivers should I solder in a [15amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0476015MRSN?qs=sGAEpiMZZMtxU2g%2F1juGqTi%252bNtKN7qu4p8sgPytjpHvp9IQs9yJn3A%3D%3D) LittleFuse to better help",
"17 steppers. The minute I turned my printer back on, the still working",
"connected to a 24v PSU. **My question is:** \"When I fix the drivers",
"drivers should I solder in a [15amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0476015MRSN?qs=sGAEpiMZZMtxU2g%2F1juGqTi%252bNtKN7qu4p8sgPytjpHvp9IQs9yJn3A%3D%3D) LittleFuse to better help the",
"it to work with one of the NEMA 17 steppers. The minute I",
"cutting off the power. I decided to test the still working driver by",
"the still working stepper (now attached to the NEMA 17 stepper) immediately blew",
"connected to the power pins had blown on both drivers connected to the",
"two DQ542MA drivers in order to run two NEMA 17 steppers. After about",
"I decided to test the still working driver by disconnecting it from the",
"both are properly set to a RMS of 1.69 and a pulse/rev of",
"both drivers. The DQ542MA driver running my NEMA 23 High Torque stepper was",
"five months now. Using an Ohm meter to check I found that the",
"two NEMA 17 steppers. After about five days of use I noticed that",
"running my NEMA 23 High Torque stepper was still running and it has",
"stepper and corresponding pins on the motherboard and connecting and resetting it to",
"The minute I turned my printer back on, the still working stepper (now",
"drivers. The DQ542MA driver running my NEMA 23 High Torque stepper was still",
"the power. I decided to test the still working driver by disconnecting it",
"to the NEMA 17 steppers cutting off the power. I decided to test",
"about five days of use I noticed that the green indicator light had",
"by disconnecting it from the NEMA 23 stepper and corresponding pins on the",
"connected to that stepper for five months now. Using an Ohm meter to",
"a RMS of 1.69 and a pulse/rev of 400, and both are connected",
"PSU. **My question is:** \"When I fix the drivers should I solder in",
"and a pulse/rev of 400, and both are connected to a 24v PSU.",
"and corresponding pins on the motherboard and connecting and resetting it to work",
"are properly set to a RMS of 1.69 and a pulse/rev of 400,",
"both are connected to a 24v PSU. **My question is:** \"When I fix",
"running and it has been connected to that stepper for five months now.",
"immediately blew the same fuse. I don't understand why the NEMA 17 steppers",
"work with one of the NEMA 17 steppers. The minute I turned my",
"set to a RMS of 1.69 and a pulse/rev of 400, and both",
"my NEMA 23 High Torque stepper was still running and it has been",
"on the motherboard and connecting and resetting it to work with one of",
"is:** \"When I fix the drivers should I solder in a [15amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0476015MRSN?qs=sGAEpiMZZMtxU2g%2F1juGqTi%252bNtKN7qu4p8sgPytjpHvp9IQs9yJn3A%3D%3D)",
"(now attached to the NEMA 17 stepper) immediately blew the same fuse. I",
"to that stepper for five months now. Using an Ohm meter to check",
"400, and both are connected to a 24v PSU. **My question is:** \"When",
"of use I noticed that the green indicator light had gone out on",
"Ohm meter to check I found that the [10amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0451010MRL?qs=sGAEpiMZZMtxU2g%2F1juGqdRmCQF0%252bT4VCAcmqQZMjh4%3D) LittleFuse connected to",
"23 stepper and corresponding pins on the motherboard and connecting and resetting it",
"NEMA 17 steppers blew the fuses of the drivers, seeing as how both",
"resetting it to work with one of the NEMA 17 steppers. The minute",
"still working driver by disconnecting it from the NEMA 23 stepper and corresponding",
"the power pins had blown on both drivers connected to the NEMA 17",
"solder in a [15amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0476015MRSN?qs=sGAEpiMZZMtxU2g%2F1juGqTi%252bNtKN7qu4p8sgPytjpHvp9IQs9yJn3A%3D%3D) LittleFuse to better help the power flow and",
"NEMA 17 steppers. The minute I turned my printer back on, the still",
"[15amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0476015MRSN?qs=sGAEpiMZZMtxU2g%2F1juGqTi%252bNtKN7qu4p8sgPytjpHvp9IQs9yJn3A%3D%3D) LittleFuse to better help the power flow and prevent any further",
"NEMA 23 stepper and corresponding pins on the motherboard and connecting and resetting",
"understand why the NEMA 17 steppers blew the fuses of the drivers, seeing",
"days of use I noticed that the green indicator light had gone out",
"meter to check I found that the [10amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0451010MRL?qs=sGAEpiMZZMtxU2g%2F1juGqdRmCQF0%252bT4VCAcmqQZMjh4%3D) LittleFuse connected to the",
"the NEMA 17 steppers cutting off the power. I decided to test the",
"to work with one of the NEMA 17 steppers. The minute I turned",
"it has been connected to that stepper for five months now. Using an",
"printer back on, the still working stepper (now attached to the NEMA 17",
"the still working driver by disconnecting it from the NEMA 23 stepper and",
"1.69 and a pulse/rev of 400, and both are connected to a 24v",
"steppers. The minute I turned my printer back on, the still working stepper",
"stepper) immediately blew the same fuse. I don't understand why the NEMA 17",
"the NEMA 17 steppers. The minute I turned my printer back on, the",
"the drivers, seeing as how both are properly set to a RMS of",
"NEMA 17 stepper) immediately blew the same fuse. I don't understand why the",
"motherboard and connecting and resetting it to work with one of the NEMA",
"on, the still working stepper (now attached to the NEMA 17 stepper) immediately",
"turned my printer back on, the still working stepper (now attached to the",
"17 steppers. After about five days of use I noticed that the green",
"to run two NEMA 17 steppers. After about five days of use I",
"on both drivers. The DQ542MA driver running my NEMA 23 High Torque stepper",
"to test the still working driver by disconnecting it from the NEMA 23",
"don't understand why the NEMA 17 steppers blew the fuses of the drivers,",
"a pulse/rev of 400, and both are connected to a 24v PSU. **My",
"five days of use I noticed that the green indicator light had gone",
"and connecting and resetting it to work with one of the NEMA 17",
"the fuses of the drivers, seeing as how both are properly set to",
"After about five days of use I noticed that the green indicator light"
] |
[
"on materials: * Ideal top 3 materials recommended/ most suitable for this item?",
"to its fatigue resistance, semi-flexible, and lightweight characteristics.* **Entire Material Lists looked at:**",
"and suggest on materials: * Ideal top 3 materials recommended/ most suitable for",
"**Item to replicate via 3D Printing:** [Club Handle](https://i.stack.imgur.com/DfX58.jpg) - 5/6 image album (a",
"people gave was to use **PP printing**, however I am looking for alternatives",
"3 materials that are easier to get through \"Entities\" on 3dHubs? * **Add",
"28 mm Diameter Instead of me trying to figure out materials, I seek",
"**PP printing**, however I am looking for alternatives because PP printing is **not",
"28 PET Threading** * 20 cm Length - Avg. 28 mm Diameter Instead",
"3D Printing Materials Guide](https://all3dp.com/1/3d-printing-materials-guide-3d-printer-material/) * [3DPrinting.com - 3D Printer Materials Guide](https://3dprinting.com/materials/) * [Shapeways",
"image 1](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item - image 1\")](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item",
"use **PP printing**, however I am looking for alternatives because PP printing is",
"(Sculpting, lathe, threading, CNC types)?* **Note:** The immediate answer people gave was to",
"Materials Guide](https://all3dp.com/1/3d-printing-materials-guide-3d-printer-material/) * [3DPrinting.com - 3D Printer Materials Guide](https://3dprinting.com/materials/) * [Shapeways - Materials",
"- image 1\") [![Injection molded Polypropylene item - image 2](https://i.stack.imgur.com/X6ZtT.jpg \"Injection molded Polypropylene",
"alternatives because PP printing is **not common or easy to find nearby** and",
"Circular motion** like this: [YouTube - 10 Best Indian Club Exercises](https://www.youtube.com/watch?v=fIEOWh87ahY) * Item",
"and **ratings** for various **parameters**: * Print-ability * Strength * Stiffness * Durability",
"answer people gave was to use **PP printing**, however I am looking for",
"materials, I seek advice from experienced experts here. Please advise and suggest on",
"Polypropylene item? **Item to replicate via 3D Printing:** [Club Handle](https://i.stack.imgur.com/DfX58.jpg) - 5/6 image",
"I looked through these **material guides** which show **different attributes** and **ratings** for",
"3 materials recommended/ most suitable for this item? * Other top 3 materials",
"3dHubs? * **Add Thought:** *Is \"negative\" printing is the way to go (Sculpting,",
"Which common 3D printing materials/methods will suitably replicate (with durability) this injection molded",
"shaped to be valid on 3D SE?](https://3dprinting.meta.stackexchange.com/questions/281/could-this-printing-material-recommendation-question-be-or-shaped-to-be-valid-on/283#283)** --- Which common 3D printing materials/methods",
"* [Tinkercad - 3D Printing Materials Guide](https://blog.tinkercad.com/materialsguide/) * [All3DP - 2018 3D Printing",
"to create an Impact or Hit but to **Flow in Circular motion** like",
"and lightweight characteristics.* **Entire Material Lists looked at:** * [Simplify3D - Ultimate 3D",
"for high-cycle, low strength applications due to its fatigue resistance, semi-flexible, and lightweight",
"through \"Entities\" on 3dHubs? * **Add Thought:** *Is \"negative\" printing is the way",
"in play on object:** Usage Intent is not to create an Impact or",
"--- **Self Homework:** So I looked through these **material guides** which show **different",
"Materials Guide](https://www.simplify3d.com/support/materials-guide/) * [Tinkercad - 3D Printing Materials Guide](https://blog.tinkercad.com/materialsguide/) * [All3DP - 2018",
"object:** Usage Intent is not to create an Impact or Hit but to",
"Instead of me trying to figure out materials, I seek advice from experienced",
"show **different attributes** and **ratings** for various **parameters**: * Print-ability * Strength *",
"common or easy to find nearby** and **expensive**. --- **Self Homework:** So I",
"I seek advice from experienced experts here. Please advise and suggest on materials:",
"Polypropylene item - image 1](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item - image 1\")](https://i.stack.imgur.com/xqbz5.jpg \"Injection",
"example, Polypropylene - [Simplify3D - Polypropylene](https://www.simplify3d.com/support/materials-guide/polypropylene/) *Polypropylene is great for high-cycle, low strength",
"- image 2](https://i.stack.imgur.com/X6ZtT.jpg \"Injection molded Polypropylene item - image 2\")](https://i.stack.imgur.com/X6ZtT.jpg \"Injection molded Polypropylene",
"2](https://i.stack.imgur.com/X6ZtT.jpg \"Injection molded Polypropylene item - image 2\")](https://i.stack.imgur.com/X6ZtT.jpg \"Injection molded Polypropylene item -",
"get through \"Entities\" on 3dHubs? * **Add Thought:** *Is \"negative\" printing is the",
"is not to create an Impact or Hit but to **Flow in Circular",
"experienced experts here. Please advise and suggest on materials: * Ideal top 3",
"posting & got a YES: **[Could this Printing Material Recommendation Question be or",
"or easy to find nearby** and **expensive**. --- **Self Homework:** So I looked",
"to posting & got a YES: **[Could this Printing Material Recommendation Question be",
"experts here. Please advise and suggest on materials: * Ideal top 3 materials",
"**not common or easy to find nearby** and **expensive**. --- **Self Homework:** So",
"attached below as well) **Physics, Mechanics & Forces in play on object:** Usage",
"Guide](https://www.simplify3d.com/support/materials-guide/) * [Tinkercad - 3D Printing Materials Guide](https://blog.tinkercad.com/materialsguide/) * [All3DP - 2018 3D",
"3D SE?](https://3dprinting.meta.stackexchange.com/questions/281/could-this-printing-material-recommendation-question-be-or-shaped-to-be-valid-on/283#283)** --- Which common 3D printing materials/methods will suitably replicate (with durability)",
"in Circular motion** like this: [YouTube - 10 Best Indian Club Exercises](https://www.youtube.com/watch?v=fIEOWh87ahY) *",
"1\")](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item - image 1\") [ *Polypropylene is great for high-cycle, low",
"applications due to its fatigue resistance, semi-flexible, and lightweight characteristics.* **Entire Material Lists",
"--- Which common 3D printing materials/methods will suitably replicate (with durability) this injection",
"item - image 2](https://i.stack.imgur.com/X6ZtT.jpg \"Injection molded Polypropylene item - image 2\")](https://i.stack.imgur.com/X6ZtT.jpg \"Injection molded",
"* 20 cm Length - Avg. 28 mm Diameter Instead of me trying",
"Lists looked at:** * [Simplify3D - Ultimate 3D Printing Materials Guide](https://www.simplify3d.com/support/materials-guide/) * [Tinkercad",
"its fatigue resistance, semi-flexible, and lightweight characteristics.* **Entire Material Lists looked at:** *",
"Printing Materials Guide](https://www.simplify3d.com/support/materials-guide/) * [Tinkercad - 3D Printing Materials Guide](https://blog.tinkercad.com/materialsguide/) * [All3DP -",
"printing**, however I am looking for alternatives because PP printing is **not common",
"figure out materials, I seek advice from experienced experts here. Please advise and",
"to find nearby** and **expensive**. --- **Self Homework:** So I looked through these",
"5/6 image album (a few images are attached below as well) **Physics, Mechanics",
"Intent is not to create an Impact or Hit but to **Flow in",
"album (a few images are attached below as well) **Physics, Mechanics & Forces",
"**Add Thought:** *Is \"negative\" printing is the way to go (Sculpting, lathe, threading,",
"or Hit but to **Flow in Circular motion** like this: [YouTube - 10",
"\"Injection molded Polypropylene item - image 1\")](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item - image",
"is great for high-cycle, low strength applications due to its fatigue resistance, semi-flexible,",
"(a few images are attached below as well) **Physics, Mechanics & Forces in",
"* Item with **PCO 28 PET Threading** * 20 cm Length - Avg.",
"materials: * Ideal top 3 materials recommended/ most suitable for this item? *",
"Ultimate 3D Printing Materials Guide](https://www.simplify3d.com/support/materials-guide/) * [Tinkercad - 3D Printing Materials Guide](https://blog.tinkercad.com/materialsguide/) *",
"create an Impact or Hit but to **Flow in Circular motion** like this:",
"Impact or Hit but to **Flow in Circular motion** like this: [YouTube -",
"fatigue resistance, semi-flexible, and lightweight characteristics.* **Entire Material Lists looked at:** * [Simplify3D",
"PET Threading** * 20 cm Length - Avg. 28 mm Diameter Instead of",
"for this item? * Other top 3 materials that are easier to get",
"characteristics.* **Entire Material Lists looked at:** * [Simplify3D - Ultimate 3D Printing Materials",
"attributes** and **ratings** for various **parameters**: * Print-ability * Strength * Stiffness *",
"not to create an Impact or Hit but to **Flow in Circular motion**",
"various **parameters**: * Print-ability * Strength * Stiffness * Durability * Price For",
"to be valid on 3D SE?](https://3dprinting.meta.stackexchange.com/questions/281/could-this-printing-material-recommendation-question-be-or-shaped-to-be-valid-on/283#283)** --- Which common 3D printing materials/methods will",
"I am looking for alternatives because PP printing is **not common or easy",
"YES: **[Could this Printing Material Recommendation Question be or shaped to be valid",
"* [Simplify3D - Ultimate 3D Printing Materials Guide](https://www.simplify3d.com/support/materials-guide/) * [Tinkercad - 3D Printing",
"image 1\") [![Injection molded Polypropylene item - image 2](https://i.stack.imgur.com/X6ZtT.jpg \"Injection molded Polypropylene item",
"on 3D SE?](https://3dprinting.meta.stackexchange.com/questions/281/could-this-printing-material-recommendation-question-be-or-shaped-to-be-valid-on/283#283)** --- Which common 3D printing materials/methods will suitably replicate (with",
"* Durability * Price For example, Polypropylene - [Simplify3D - Polypropylene](https://www.simplify3d.com/support/materials-guide/polypropylene/) *Polypropylene is",
"easier to get through \"Entities\" on 3dHubs? * **Add Thought:** *Is \"negative\" printing",
"to **Flow in Circular motion** like this: [YouTube - 10 Best Indian Club",
"***Note***: Before any negative flagging, we asked permission on Meta prior to posting",
"Polypropylene item - image 1\") [![Injection molded Polypropylene item - image 2](https://i.stack.imgur.com/X6ZtT.jpg \"Injection",
"Exercises](https://www.youtube.com/watch?v=fIEOWh87ahY) * Item with **PCO 28 PET Threading** * 20 cm Length -",
"Material Recommendation Question be or shaped to be valid on 3D SE?](https://3dprinting.meta.stackexchange.com/questions/281/could-this-printing-material-recommendation-question-be-or-shaped-to-be-valid-on/283#283)** ---",
"**expensive**. --- **Self Homework:** So I looked through these **material guides** which show",
"**Self Homework:** So I looked through these **material guides** which show **different attributes**",
"2018 3D Printing Materials Guide](https://all3dp.com/1/3d-printing-materials-guide-3d-printer-material/) * [3DPrinting.com - 3D Printer Materials Guide](https://3dprinting.com/materials/) *",
"SE?](https://3dprinting.meta.stackexchange.com/questions/281/could-this-printing-material-recommendation-question-be-or-shaped-to-be-valid-on/283#283)** --- Which common 3D printing materials/methods will suitably replicate (with durability) this",
"[![Injection molded Polypropylene item - image 2](https://i.stack.imgur.com/X6ZtT.jpg \"Injection molded Polypropylene item - image",
"Recommendation Question be or shaped to be valid on 3D SE?](https://3dprinting.meta.stackexchange.com/questions/281/could-this-printing-material-recommendation-question-be-or-shaped-to-be-valid-on/283#283)** --- Which",
"high-cycle, low strength applications due to its fatigue resistance, semi-flexible, and lightweight characteristics.*",
"well) **Physics, Mechanics & Forces in play on object:** Usage Intent is not",
"Polypropylene - [Simplify3D - Polypropylene](https://www.simplify3d.com/support/materials-guide/polypropylene/) *Polypropylene is great for high-cycle, low strength applications",
"low strength applications due to its fatigue resistance, semi-flexible, and lightweight characteristics.* **Entire",
"\"Entities\" on 3dHubs? * **Add Thought:** *Is \"negative\" printing is the way to",
"[3DPrinting.com - 3D Printer Materials Guide](https://3dprinting.com/materials/) * [Shapeways - Materials for every stage",
"- [Simplify3D - Polypropylene](https://www.simplify3d.com/support/materials-guide/polypropylene/) *Polypropylene is great for high-cycle, low strength applications due",
"find nearby** and **expensive**. --- **Self Homework:** So I looked through these **material",
"guides** which show **different attributes** and **ratings** for various **parameters**: * Print-ability *",
"molded Polypropylene item - image 2\")](https://i.stack.imgur.com/X6ZtT.jpg \"Injection molded Polypropylene item - image 2\")",
"materials/methods will suitably replicate (with durability) this injection molded Polypropylene item? **Item to",
"--- [![Injection molded Polypropylene item - image 1](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item -",
"\"Injection molded Polypropylene item - image 1\") [ * [Shapeways - Materials for every stage of",
"Polypropylene](https://www.simplify3d.com/support/materials-guide/polypropylene/) *Polypropylene is great for high-cycle, low strength applications due to its fatigue",
"* Price For example, Polypropylene - [Simplify3D - Polypropylene](https://www.simplify3d.com/support/materials-guide/polypropylene/) *Polypropylene is great for",
"[Simplify3D - Polypropylene](https://www.simplify3d.com/support/materials-guide/polypropylene/) *Polypropylene is great for high-cycle, low strength applications due to",
"**Note:** The immediate answer people gave was to use **PP printing**, however I",
"- Polypropylene](https://www.simplify3d.com/support/materials-guide/polypropylene/) *Polypropylene is great for high-cycle, low strength applications due to its",
"suggest on materials: * Ideal top 3 materials recommended/ most suitable for this",
"to replicate via 3D Printing:** [Club Handle](https://i.stack.imgur.com/DfX58.jpg) - 5/6 image album (a few",
"top 3 materials recommended/ most suitable for this item? * Other top 3",
"way to go (Sculpting, lathe, threading, CNC types)?* **Note:** The immediate answer people",
"am looking for alternatives because PP printing is **not common or easy to",
"got a YES: **[Could this Printing Material Recommendation Question be or shaped to",
"strength applications due to its fatigue resistance, semi-flexible, and lightweight characteristics.* **Entire Material",
"asked permission on Meta prior to posting & got a YES: **[Could this",
"suitably replicate (with durability) this injection molded Polypropylene item? **Item to replicate via",
"cm Length - Avg. 28 mm Diameter Instead of me trying to figure",
"Handle](https://i.stack.imgur.com/DfX58.jpg) - 5/6 image album (a few images are attached below as well)",
"Before any negative flagging, we asked permission on Meta prior to posting &",
"great for high-cycle, low strength applications due to its fatigue resistance, semi-flexible, and",
"from experienced experts here. Please advise and suggest on materials: * Ideal top",
"& Forces in play on object:** Usage Intent is not to create an",
"resistance, semi-flexible, and lightweight characteristics.* **Entire Material Lists looked at:** * [Simplify3D -",
"**PCO 28 PET Threading** * 20 cm Length - Avg. 28 mm Diameter",
"to figure out materials, I seek advice from experienced experts here. Please advise",
"negative flagging, we asked permission on Meta prior to posting & got a",
"**Entire Material Lists looked at:** * [Simplify3D - Ultimate 3D Printing Materials Guide](https://www.simplify3d.com/support/materials-guide/)",
"advice from experienced experts here. Please advise and suggest on materials: * Ideal",
"stage of any project](https://www.shapeways.com/materials) --- [![Injection molded Polypropylene item - image 1](https://i.stack.imgur.com/xqbz5.jpg \"Injection",
"this item? * Other top 3 materials that are easier to get through",
"Printer Materials Guide](https://3dprinting.com/materials/) * [Shapeways - Materials for every stage of any project](https://www.shapeways.com/materials)",
"at:** * [Simplify3D - Ultimate 3D Printing Materials Guide](https://www.simplify3d.com/support/materials-guide/) * [Tinkercad - 3D",
"molded Polypropylene item - image 1\") [![Injection molded Polypropylene item - image 2](https://i.stack.imgur.com/X6ZtT.jpg",
"the way to go (Sculpting, lathe, threading, CNC types)?* **Note:** The immediate answer",
"* [All3DP - 2018 3D Printing Materials Guide](https://all3dp.com/1/3d-printing-materials-guide-3d-printer-material/) * [3DPrinting.com - 3D Printer",
"**different attributes** and **ratings** for various **parameters**: * Print-ability * Strength * Stiffness",
"which show **different attributes** and **ratings** for various **parameters**: * Print-ability * Strength",
"for alternatives because PP printing is **not common or easy to find nearby**",
"item - image 1](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item - image 1\")](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded",
"this: [YouTube - 10 Best Indian Club Exercises](https://www.youtube.com/watch?v=fIEOWh87ahY) * Item with **PCO 28",
"* [Shapeways - Materials for every stage of any project](https://www.shapeways.com/materials) --- [ * [All3DP - 2018 3D Printing Materials Guide](https://all3dp.com/1/3d-printing-materials-guide-3d-printer-material/) * [3DPrinting.com -",
"due to its fatigue resistance, semi-flexible, and lightweight characteristics.* **Entire Material Lists looked",
"me trying to figure out materials, I seek advice from experienced experts here.",
"Threading** * 20 cm Length - Avg. 28 mm Diameter Instead of me",
"here. Please advise and suggest on materials: * Ideal top 3 materials recommended/",
"replicate (with durability) this injection molded Polypropylene item? **Item to replicate via 3D",
"3D printing materials/methods will suitably replicate (with durability) this injection molded Polypropylene item?",
"project](https://www.shapeways.com/materials) --- [![Injection molded Polypropylene item - image 1](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item",
"mm Diameter Instead of me trying to figure out materials, I seek advice",
"Avg. 28 mm Diameter Instead of me trying to figure out materials, I",
"[![Injection molded Polypropylene item - image 1](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item - image",
"* Stiffness * Durability * Price For example, Polypropylene - [Simplify3D - Polypropylene](https://www.simplify3d.com/support/materials-guide/polypropylene/)",
"\"negative\" printing is the way to go (Sculpting, lathe, threading, CNC types)?* **Note:**",
"**Physics, Mechanics & Forces in play on object:** Usage Intent is not to",
"with **PCO 28 PET Threading** * 20 cm Length - Avg. 28 mm",
"3D Printing:** [Club Handle](https://i.stack.imgur.com/DfX58.jpg) - 5/6 image album (a few images are attached",
"materials recommended/ most suitable for this item? * Other top 3 materials that",
"[Shapeways - Materials for every stage of any project](https://www.shapeways.com/materials) --- [ * [3DPrinting.com - 3D Printer Materials Guide](https://3dprinting.com/materials/)",
"semi-flexible, and lightweight characteristics.* **Entire Material Lists looked at:** * [Simplify3D - Ultimate",
"common 3D printing materials/methods will suitably replicate (with durability) this injection molded Polypropylene",
"Printing:** [Club Handle](https://i.stack.imgur.com/DfX58.jpg) - 5/6 image album (a few images are attached below",
"on 3dHubs? * **Add Thought:** *Is \"negative\" printing is the way to go",
"Print-ability * Strength * Stiffness * Durability * Price For example, Polypropylene -",
"Materials Guide](https://3dprinting.com/materials/) * [Shapeways - Materials for every stage of any project](https://www.shapeways.com/materials) ---",
"or shaped to be valid on 3D SE?](https://3dprinting.meta.stackexchange.com/questions/281/could-this-printing-material-recommendation-question-be-or-shaped-to-be-valid-on/283#283)** --- Which common 3D printing",
"Printing Materials Guide](https://all3dp.com/1/3d-printing-materials-guide-3d-printer-material/) * [3DPrinting.com - 3D Printer Materials Guide](https://3dprinting.com/materials/) * [Shapeways -",
"**material guides** which show **different attributes** and **ratings** for various **parameters**: * Print-ability",
"lightweight characteristics.* **Entire Material Lists looked at:** * [Simplify3D - Ultimate 3D Printing",
"The immediate answer people gave was to use **PP printing**, however I am",
"Price For example, Polypropylene - [Simplify3D - Polypropylene](https://www.simplify3d.com/support/materials-guide/polypropylene/) *Polypropylene is great for high-cycle,",
"suitable for this item? * Other top 3 materials that are easier to",
"this Printing Material Recommendation Question be or shaped to be valid on 3D",
"easy to find nearby** and **expensive**. --- **Self Homework:** So I looked through",
"but to **Flow in Circular motion** like this: [YouTube - 10 Best Indian",
"to use **PP printing**, however I am looking for alternatives because PP printing",
"through these **material guides** which show **different attributes** and **ratings** for various **parameters**:",
"- 10 Best Indian Club Exercises](https://www.youtube.com/watch?v=fIEOWh87ahY) * Item with **PCO 28 PET Threading**",
"20 cm Length - Avg. 28 mm Diameter Instead of me trying to",
"types)?* **Note:** The immediate answer people gave was to use **PP printing**, however",
"molded Polypropylene item? **Item to replicate via 3D Printing:** [Club Handle](https://i.stack.imgur.com/DfX58.jpg) - 5/6",
"item? * Other top 3 materials that are easier to get through \"Entities\"",
"replicate via 3D Printing:** [Club Handle](https://i.stack.imgur.com/DfX58.jpg) - 5/6 image album (a few images",
"that are easier to get through \"Entities\" on 3dHubs? * **Add Thought:** *Is",
"Hit but to **Flow in Circular motion** like this: [YouTube - 10 Best",
"* Print-ability * Strength * Stiffness * Durability * Price For example, Polypropylene",
"to get through \"Entities\" on 3dHubs? * **Add Thought:** *Is \"negative\" printing is",
"So I looked through these **material guides** which show **different attributes** and **ratings**",
"for every stage of any project](https://www.shapeways.com/materials) --- [ --- [![Injection molded Polypropylene item - image 1](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded",
"item - image 1\") [![Injection molded Polypropylene item - image 2](https://i.stack.imgur.com/X6ZtT.jpg \"Injection molded",
"- image 1](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item - image 1\")](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene",
"like this: [YouTube - 10 Best Indian Club Exercises](https://www.youtube.com/watch?v=fIEOWh87ahY) * Item with **PCO",
"- Materials for every stage of any project](https://www.shapeways.com/materials) --- [** --- Which common",
"was to use **PP printing**, however I am looking for alternatives because PP",
"*Is \"negative\" printing is the way to go (Sculpting, lathe, threading, CNC types)?*",
"seek advice from experienced experts here. Please advise and suggest on materials: *",
"to go (Sculpting, lathe, threading, CNC types)?* **Note:** The immediate answer people gave",
"[Simplify3D - Ultimate 3D Printing Materials Guide](https://www.simplify3d.com/support/materials-guide/) * [Tinkercad - 3D Printing Materials",
"printing materials/methods will suitably replicate (with durability) this injection molded Polypropylene item? **Item",
"recommended/ most suitable for this item? * Other top 3 materials that are",
"Guide](https://all3dp.com/1/3d-printing-materials-guide-3d-printer-material/) * [3DPrinting.com - 3D Printer Materials Guide](https://3dprinting.com/materials/) * [Shapeways - Materials for",
"Meta prior to posting & got a YES: **[Could this Printing Material Recommendation",
"play on object:** Usage Intent is not to create an Impact or Hit",
"immediate answer people gave was to use **PP printing**, however I am looking",
"* [3DPrinting.com - 3D Printer Materials Guide](https://3dprinting.com/materials/) * [Shapeways - Materials for every",
"Indian Club Exercises](https://www.youtube.com/watch?v=fIEOWh87ahY) * Item with **PCO 28 PET Threading** * 20 cm",
"Polypropylene item - image 2](https://i.stack.imgur.com/X6ZtT.jpg \"Injection molded Polypropylene item - image 2\")](https://i.stack.imgur.com/X6ZtT.jpg \"Injection",
"injection molded Polypropylene item? **Item to replicate via 3D Printing:** [Club Handle](https://i.stack.imgur.com/DfX58.jpg) -",
"- image 1\")](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item - image 1\") [ * [All3DP - 2018 3D Printing Materials Guide](https://all3dp.com/1/3d-printing-materials-guide-3d-printer-material/)",
"be or shaped to be valid on 3D SE?](https://3dprinting.meta.stackexchange.com/questions/281/could-this-printing-material-recommendation-question-be-or-shaped-to-be-valid-on/283#283)** --- Which common 3D",
"Material Lists looked at:** * [Simplify3D - Ultimate 3D Printing Materials Guide](https://www.simplify3d.com/support/materials-guide/) *",
"[Club Handle](https://i.stack.imgur.com/DfX58.jpg) - 5/6 image album (a few images are attached below as",
"trying to figure out materials, I seek advice from experienced experts here. Please",
"3D Printing Materials Guide](https://www.simplify3d.com/support/materials-guide/) * [Tinkercad - 3D Printing Materials Guide](https://blog.tinkercad.com/materialsguide/) * [All3DP",
"- 5/6 image album (a few images are attached below as well) **Physics,",
"image 2](https://i.stack.imgur.com/X6ZtT.jpg \"Injection molded Polypropylene item - image 2\")](https://i.stack.imgur.com/X6ZtT.jpg \"Injection molded Polypropylene item",
"**ratings** for various **parameters**: * Print-ability * Strength * Stiffness * Durability *",
"molded Polypropylene item - image 1\")](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item - image 1\")",
"* Other top 3 materials that are easier to get through \"Entities\" on",
"Forces in play on object:** Usage Intent is not to create an Impact",
"threading, CNC types)?* **Note:** The immediate answer people gave was to use **PP",
"printing is the way to go (Sculpting, lathe, threading, CNC types)?* **Note:** The",
"lathe, threading, CNC types)?* **Note:** The immediate answer people gave was to use",
"out materials, I seek advice from experienced experts here. Please advise and suggest",
"valid on 3D SE?](https://3dprinting.meta.stackexchange.com/questions/281/could-this-printing-material-recommendation-question-be-or-shaped-to-be-valid-on/283#283)** --- Which common 3D printing materials/methods will suitably replicate",
"Club Exercises](https://www.youtube.com/watch?v=fIEOWh87ahY) * Item with **PCO 28 PET Threading** * 20 cm Length",
"Stiffness * Durability * Price For example, Polypropylene - [Simplify3D - Polypropylene](https://www.simplify3d.com/support/materials-guide/polypropylene/) *Polypropylene",
"looked at:** * [Simplify3D - Ultimate 3D Printing Materials Guide](https://www.simplify3d.com/support/materials-guide/) * [Tinkercad -",
"are easier to get through \"Entities\" on 3dHubs? * **Add Thought:** *Is \"negative\"",
"looking for alternatives because PP printing is **not common or easy to find",
"for various **parameters**: * Print-ability * Strength * Stiffness * Durability * Price",
"- Ultimate 3D Printing Materials Guide](https://www.simplify3d.com/support/materials-guide/) * [Tinkercad - 3D Printing Materials Guide](https://blog.tinkercad.com/materialsguide/)",
"[All3DP - 2018 3D Printing Materials Guide](https://all3dp.com/1/3d-printing-materials-guide-3d-printer-material/) * [3DPrinting.com - 3D Printer Materials",
"* Ideal top 3 materials recommended/ most suitable for this item? * Other",
"PP printing is **not common or easy to find nearby** and **expensive**. ---",
"1\") [![Injection molded Polypropylene item - image 2](https://i.stack.imgur.com/X6ZtT.jpg \"Injection molded Polypropylene item -",
"& got a YES: **[Could this Printing Material Recommendation Question be or shaped",
"this injection molded Polypropylene item? **Item to replicate via 3D Printing:** [Club Handle](https://i.stack.imgur.com/DfX58.jpg)",
"any negative flagging, we asked permission on Meta prior to posting & got",
"Strength * Stiffness * Durability * Price For example, Polypropylene - [Simplify3D -",
"however I am looking for alternatives because PP printing is **not common or",
"every stage of any project](https://www.shapeways.com/materials) --- [![Injection molded Polypropylene item - image 1](https://i.stack.imgur.com/xqbz5.jpg",
"Materials for every stage of any project](https://www.shapeways.com/materials) --- [ * Item with **PCO 28 PET Threading** *",
"Other top 3 materials that are easier to get through \"Entities\" on 3dHubs?",
"3D Printer Materials Guide](https://3dprinting.com/materials/) * [Shapeways - Materials for every stage of any",
"3D Printing Materials Guide](https://blog.tinkercad.com/materialsguide/) * [All3DP - 2018 3D Printing Materials Guide](https://all3dp.com/1/3d-printing-materials-guide-3d-printer-material/) *",
"Thought:** *Is \"negative\" printing is the way to go (Sculpting, lathe, threading, CNC",
"Usage Intent is not to create an Impact or Hit but to **Flow",
"1](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item - image 1\")](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item -",
"durability) this injection molded Polypropylene item? **Item to replicate via 3D Printing:** [Club",
"image album (a few images are attached below as well) **Physics, Mechanics &",
"\"Injection molded Polypropylene item - image 2\")](https://i.stack.imgur.com/X6ZtT.jpg \"Injection molded Polypropylene item - image",
"item - image 1\")](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item - image 1\") [ - 5/6 image album (a few images are",
"molded Polypropylene item - image 1](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item - image 1\")](https://i.stack.imgur.com/xqbz5.jpg",
"these **material guides** which show **different attributes** and **ratings** for various **parameters**: *",
"be valid on 3D SE?](https://3dprinting.meta.stackexchange.com/questions/281/could-this-printing-material-recommendation-question-be-or-shaped-to-be-valid-on/283#283)** --- Which common 3D printing materials/methods will suitably",
"Polypropylene item - image 1\")](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item - image 1\") [ * Item with",
"permission on Meta prior to posting & got a YES: **[Could this Printing",
"Diameter Instead of me trying to figure out materials, I seek advice from",
"[Tinkercad - 3D Printing Materials Guide](https://blog.tinkercad.com/materialsguide/) * [All3DP - 2018 3D Printing Materials",
"materials that are easier to get through \"Entities\" on 3dHubs? * **Add Thought:**",
"*Polypropylene is great for high-cycle, low strength applications due to its fatigue resistance,",
"CNC types)?* **Note:** The immediate answer people gave was to use **PP printing**,",
"we asked permission on Meta prior to posting & got a YES: **[Could",
"and **expensive**. --- **Self Homework:** So I looked through these **material guides** which",
"a YES: **[Could this Printing Material Recommendation Question be or shaped to be",
"images are attached below as well) **Physics, Mechanics & Forces in play on",
"item? **Item to replicate via 3D Printing:** [Club Handle](https://i.stack.imgur.com/DfX58.jpg) - 5/6 image album",
"[YouTube - 10 Best Indian Club Exercises](https://www.youtube.com/watch?v=fIEOWh87ahY) * Item with **PCO 28 PET",
"are attached below as well) **Physics, Mechanics & Forces in play on object:**",
"prior to posting & got a YES: **[Could this Printing Material Recommendation Question",
"- Avg. 28 mm Diameter Instead of me trying to figure out materials,",
"Guide](https://3dprinting.com/materials/) * [Shapeways - Materials for every stage of any project](https://www.shapeways.com/materials) --- [![Injection",
"molded Polypropylene item - image 2](https://i.stack.imgur.com/X6ZtT.jpg \"Injection molded Polypropylene item - image 2\")](https://i.stack.imgur.com/X6ZtT.jpg",
"advise and suggest on materials: * Ideal top 3 materials recommended/ most suitable",
"is **not common or easy to find nearby** and **expensive**. --- **Self Homework:**",
"as well) **Physics, Mechanics & Forces in play on object:** Usage Intent is",
"Item with **PCO 28 PET Threading** * 20 cm Length - Avg. 28",
"top 3 materials that are easier to get through \"Entities\" on 3dHubs? *",
"gave was to use **PP printing**, however I am looking for alternatives because",
"nearby** and **expensive**. --- **Self Homework:** So I looked through these **material guides**",
"Printing Materials Guide](https://blog.tinkercad.com/materialsguide/) * [All3DP - 2018 3D Printing Materials Guide](https://all3dp.com/1/3d-printing-materials-guide-3d-printer-material/) * [3DPrinting.com",
"of me trying to figure out materials, I seek advice from experienced experts",
"image 1\")](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene item - image 1\") [**",
"Durability * Price For example, Polypropylene - [Simplify3D - Polypropylene](https://www.simplify3d.com/support/materials-guide/polypropylene/) *Polypropylene is great",
"**[Could this Printing Material Recommendation Question be or shaped to be valid on",
"any project](https://www.shapeways.com/materials) --- [![Injection molded Polypropylene item - image 1](https://i.stack.imgur.com/xqbz5.jpg \"Injection molded Polypropylene",
"Guide](https://blog.tinkercad.com/materialsguide/) * [All3DP - 2018 3D Printing Materials Guide](https://all3dp.com/1/3d-printing-materials-guide-3d-printer-material/) * [3DPrinting.com - 3D",
"Best Indian Club Exercises](https://www.youtube.com/watch?v=fIEOWh87ahY) * Item with **PCO 28 PET Threading** * 20",
"an Impact or Hit but to **Flow in Circular motion** like this: [YouTube",
"on Meta prior to posting & got a YES: **[Could this Printing Material",
"printing is **not common or easy to find nearby** and **expensive**. --- **Self",
"Homework:** So I looked through these **material guides** which show **different attributes** and",
"looked through these **material guides** which show **different attributes** and **ratings** for various",
"is the way to go (Sculpting, lathe, threading, CNC types)?* **Note:** The immediate",
"Please advise and suggest on materials: * Ideal top 3 materials recommended/ most",
"**Flow in Circular motion** like this: [YouTube - 10 Best Indian Club Exercises](https://www.youtube.com/watch?v=fIEOWh87ahY)"
] |
[
"but that leads to the thin lines not adhering at all. My printer",
"smartphone)* I already did Bed level correction, so each line is exactly the",
"direction are severely squished. [](https://i.stack.imgur.com/5zzEl.jpg) *(The \"waviness\" of my print bed is an artifact of the camera",
"to raise the live-adjust Z, but that leads to the thin lines not",
"i3 MK2](https://i.stack.imgur.com/5zzEl.jpg)](https://i.stack.imgur.com/5zzEl.jpg) *(The \"waviness\" of my print bed is an artifact of the",
"Original Prusa i3 MK2 Manual. Now, when doing the first layer calibration, lines",
"correction, so each line is exactly the same width over its entire distance",
"the default V2Calibration.gcode file on my Prusa i3 MK2](https://i.stack.imgur.com/5zzEl.jpg)](https://i.stack.imgur.com/5zzEl.jpg) *(The \"waviness\" of my",
"all. My printer is 100% stock, I modified nothing about it. What can",
"printer is 100% stock, I modified nothing about it. What can I do",
"Now, when doing the first layer calibration, lines that are running in positive",
"same width over its entire distance and tried to raise the live-adjust Z,",
"to the thin lines not adhering at all. My printer is 100% stock,",
"100% stock, I modified nothing about it. What can I do to troubleshoot",
"I modified nothing about it. What can I do to troubleshoot this further?",
"are severely squished. [](https://i.stack.imgur.com/5zzEl.jpg) *(The \"waviness\" of my print bed is",
"already did Bed level correction, so each line is exactly the same width",
"Bed level correction, so each line is exactly the same width over its",
"Manual. Now, when doing the first layer calibration, lines that are running in",
"*(The \"waviness\" of my print bed is an artifact of the camera lens",
"direction are ok, while those running in negative X direction are severely squished.",
"tried to raise the live-adjust Z, but that leads to the thin lines",
"Prusa i3 MK2](https://i.stack.imgur.com/5zzEl.jpg)](https://i.stack.imgur.com/5zzEl.jpg) *(The \"waviness\" of my print bed is an artifact of",
"steps from the Original Prusa i3 MK2 Manual. Now, when doing the first",
"calibration steps from the Original Prusa i3 MK2 Manual. Now, when doing the",
"of the default V2Calibration.gcode file on my Prusa i3 MK2](https://i.stack.imgur.com/5zzEl.jpg)](https://i.stack.imgur.com/5zzEl.jpg) *(The \"waviness\" of",
"severely squished. [](https://i.stack.imgur.com/5zzEl.jpg)",
"X direction are severely squished. [](https://i.stack.imgur.com/5zzEl.jpg) *(The \"waviness\" of my print bed is an",
"lens distortion of my smartphone)* I already did Bed level correction, so each",
"adhering at all. My printer is 100% stock, I modified nothing about it.",
"in negative X direction are severely squished. [](https://i.stack.imgur.com/5zzEl.jpg) *(The \"waviness\" of my print bed",
"[](https://i.stack.imgur.com/5zzEl.jpg) *(The \"waviness\"",
"of my smartphone)* I already did Bed level correction, so each line is",
"ok, while those running in negative X direction are severely squished. [](https://i.stack.imgur.com/5zzEl.jpg) *(The \"waviness\" of my print",
"of the camera lens distortion of my smartphone)* I already did Bed level",
"lines not adhering at all. My printer is 100% stock, I modified nothing",
"my Prusa i3 MK2](https://i.stack.imgur.com/5zzEl.jpg)](https://i.stack.imgur.com/5zzEl.jpg) *(The \"waviness\" of my print bed is an artifact",
"my print bed is an artifact of the camera lens distortion of my",
"lines that are running in positive X direction are ok, while those running",
"artifact of the camera lens distortion of my smartphone)* I already did Bed",
"that leads to the thin lines not adhering at all. My printer is",
"in positive X direction are ok, while those running in negative X direction",
"negative X direction are severely squished. [](https://i.stack.imgur.com/5zzEl.jpg) *(The",
"its entire distance and tried to raise the live-adjust Z, but that leads",
"that are running in positive X direction are ok, while those running in",
"the same width over its entire distance and tried to raise the live-adjust",
"is an artifact of the camera lens distortion of my smartphone)* I already",
"those running in negative X direction are severely squished. [![Print of the default",
"X direction are ok, while those running in negative X direction are severely",
"I already did Bed level correction, so each line is exactly the same",
"the Original Prusa i3 MK2 Manual. Now, when doing the first layer calibration,",
"stock, I modified nothing about it. What can I do to troubleshoot this"
] |
[
"the G-code in Slic3r without saving the exported G-Code first? When aligning seams",
"`Slice now` and `Export G-Code` do different things. While `Slice now` is nice,",
"Is there an actual way to generate and visualize the G-code in Slic3r",
"now` is nice, it does not show any tool paths etc. Is there",
"it does not show any tool paths etc. Is there an actual way",
"first? When aligning seams etc., it is quite annoying to always save the",
"When using Slic3r I noticed that `Slice now` and `Export G-Code` do different",
"paths etc. Is there an actual way to generate and visualize the G-code",
"generate and visualize the G-code in Slic3r without saving the exported G-Code first?",
"etc., it is quite annoying to always save the file to see a",
"using Slic3r I noticed that `Slice now` and `Export G-Code` do different things.",
"always save the file to see a difference because `Slice now` seems to",
"and visualize the G-code in Slic3r without saving the exported G-Code first? When",
"file to see a difference because `Slice now` seems to make little difference.",
"is quite annoying to always save the file to see a difference because",
"Slic3r I noticed that `Slice now` and `Export G-Code` do different things. While",
"do different things. While `Slice now` is nice, it does not show any",
"nice, it does not show any tool paths etc. Is there an actual",
"does not show any tool paths etc. Is there an actual way to",
"saving the exported G-Code first? When aligning seams etc., it is quite annoying",
"things. While `Slice now` is nice, it does not show any tool paths",
"Slic3r without saving the exported G-Code first? When aligning seams etc., it is",
"annoying to always save the file to see a difference because `Slice now`",
"to generate and visualize the G-code in Slic3r without saving the exported G-Code",
"etc. Is there an actual way to generate and visualize the G-code in",
"tool paths etc. Is there an actual way to generate and visualize the",
"without saving the exported G-Code first? When aligning seams etc., it is quite",
"G-code in Slic3r without saving the exported G-Code first? When aligning seams etc.,",
"it is quite annoying to always save the file to see a difference",
"seams etc., it is quite annoying to always save the file to see",
"quite annoying to always save the file to see a difference because `Slice",
"any tool paths etc. Is there an actual way to generate and visualize",
"and `Export G-Code` do different things. While `Slice now` is nice, it does",
"show any tool paths etc. Is there an actual way to generate and",
"When aligning seams etc., it is quite annoying to always save the file",
"different things. While `Slice now` is nice, it does not show any tool",
"the exported G-Code first? When aligning seams etc., it is quite annoying to",
"now` and `Export G-Code` do different things. While `Slice now` is nice, it",
"G-Code` do different things. While `Slice now` is nice, it does not show",
"aligning seams etc., it is quite annoying to always save the file to",
"way to generate and visualize the G-code in Slic3r without saving the exported",
"While `Slice now` is nice, it does not show any tool paths etc.",
"exported G-Code first? When aligning seams etc., it is quite annoying to always",
"noticed that `Slice now` and `Export G-Code` do different things. While `Slice now`",
"save the file to see a difference because `Slice now` seems to make",
"there an actual way to generate and visualize the G-code in Slic3r without",
"I noticed that `Slice now` and `Export G-Code` do different things. While `Slice",
"`Export G-Code` do different things. While `Slice now` is nice, it does not",
"not show any tool paths etc. Is there an actual way to generate",
"in Slic3r without saving the exported G-Code first? When aligning seams etc., it",
"is nice, it does not show any tool paths etc. Is there an",
"the file to see a difference because `Slice now` seems to make little",
"actual way to generate and visualize the G-code in Slic3r without saving the",
"G-Code first? When aligning seams etc., it is quite annoying to always save",
"visualize the G-code in Slic3r without saving the exported G-Code first? When aligning",
"to always save the file to see a difference because `Slice now` seems",
"an actual way to generate and visualize the G-code in Slic3r without saving",
"that `Slice now` and `Export G-Code` do different things. While `Slice now` is",
"`Slice now` is nice, it does not show any tool paths etc. Is"
] |
[
"result ``` +0.406 +0.127 +0.411 -0.161 -0.007 -0.041 -0.572 -0.652 -0.668 ``` Finally",
"up the screw of the bed, close to 0,0 position or loosen it?",
"I loosen it, it gets away from zero and I expect the opposite",
"is the result ``` +0.406 +0.127 +0.411 -0.161 -0.007 -0.041 -0.572 -0.652 -0.668",
"My G29 command reports ``` +0.178 +0.281 +0.830 -0.614 -0.012 +0.371 -1.208 -0.849",
"the screws here is the result ``` +0.406 +0.127 +0.411 -0.161 -0.007 -0.041",
"from zero and I expect the opposite to happen. For bed leveling i",
"happen. For bed leveling i use a capacitive probe and after playing around",
"-0.007 -0.041 -0.572 -0.652 -0.668 ``` Finally the leveling process was found [here](https://www.youtube.com/watch?v=y_1Kg45APko)",
"+0.830 -0.614 -0.012 +0.371 -1.208 -0.849 -0.351 ``` So should I tighten up",
"here is the result ``` +0.406 +0.127 +0.411 -0.161 -0.007 -0.041 -0.572 -0.652",
"the screw of the bed, close to 0,0 position or loosen it? I",
"For bed leveling i use a capacitive probe and after playing around with",
"-0.351 ``` So should I tighten up the screw of the bed, close",
"a capacitive probe and after playing around with the screws here is the",
"``` +0.178 +0.281 +0.830 -0.614 -0.012 +0.371 -1.208 -0.849 -0.351 ``` So should",
"away from zero and I expect the opposite to happen. For bed leveling",
"to happen. For bed leveling i use a capacitive probe and after playing",
"of the bed, close to 0,0 position or loosen it? I have a",
"``` Finally the leveling process was found [here](https://www.youtube.com/watch?v=y_1Kg45APko) But the question remains. The",
"``` +0.406 +0.127 +0.411 -0.161 -0.007 -0.041 -0.572 -0.652 -0.668 ``` Finally the",
"I have a feeling that when I loosen it, it gets away from",
"with the screws here is the result ``` +0.406 +0.127 +0.411 -0.161 -0.007",
"reports ``` +0.178 +0.281 +0.830 -0.614 -0.012 +0.371 -1.208 -0.849 -0.351 ``` So",
"was found [here](https://www.youtube.com/watch?v=y_1Kg45APko) But the question remains. The value `-0.572` corresponds close to",
"after playing around with the screws here is the result ``` +0.406 +0.127",
"leveling i use a capacitive probe and after playing around with the screws",
"expect the opposite to happen. For bed leveling i use a capacitive probe",
"it? I have a feeling that when I loosen it, it gets away",
"+0.178 +0.281 +0.830 -0.614 -0.012 +0.371 -1.208 -0.849 -0.351 ``` So should I",
"and after playing around with the screws here is the result ``` +0.406",
"loosen it, it gets away from zero and I expect the opposite to",
"+0.127 +0.411 -0.161 -0.007 -0.041 -0.572 -0.652 -0.668 ``` Finally the leveling process",
"the bed, close to 0,0 position or loosen it? I have a feeling",
"I tighten up the screw of the bed, close to 0,0 position or",
"-0.161 -0.007 -0.041 -0.572 -0.652 -0.668 ``` Finally the leveling process was found",
"command reports ``` +0.178 +0.281 +0.830 -0.614 -0.012 +0.371 -1.208 -0.849 -0.351 ```",
"process was found [here](https://www.youtube.com/watch?v=y_1Kg45APko) But the question remains. The value `-0.572` corresponds close",
"zero and I expect the opposite to happen. For bed leveling i use",
"-1.208 -0.849 -0.351 ``` So should I tighten up the screw of the",
"should I tighten up the screw of the bed, close to 0,0 position",
"it gets away from zero and I expect the opposite to happen. For",
"So should I tighten up the screw of the bed, close to 0,0",
"+0.371 -1.208 -0.849 -0.351 ``` So should I tighten up the screw of",
"bed leveling i use a capacitive probe and after playing around with the",
"a feeling that when I loosen it, it gets away from zero and",
"+0.406 +0.127 +0.411 -0.161 -0.007 -0.041 -0.572 -0.652 -0.668 ``` Finally the leveling",
"leveling process was found [here](https://www.youtube.com/watch?v=y_1Kg45APko) But the question remains. The value `-0.572` corresponds",
"Finally the leveling process was found [here](https://www.youtube.com/watch?v=y_1Kg45APko) But the question remains. The value",
"bed, close to 0,0 position or loosen it? I have a feeling that",
"opposite to happen. For bed leveling i use a capacitive probe and after",
"I expect the opposite to happen. For bed leveling i use a capacitive",
"position or loosen it? I have a feeling that when I loosen it,",
"the leveling process was found [here](https://www.youtube.com/watch?v=y_1Kg45APko) But the question remains. The value `-0.572`",
"found [here](https://www.youtube.com/watch?v=y_1Kg45APko) But the question remains. The value `-0.572` corresponds close to `0,0`",
"G29 command reports ``` +0.178 +0.281 +0.830 -0.614 -0.012 +0.371 -1.208 -0.849 -0.351",
"screws here is the result ``` +0.406 +0.127 +0.411 -0.161 -0.007 -0.041 -0.572",
"-0.041 -0.572 -0.652 -0.668 ``` Finally the leveling process was found [here](https://www.youtube.com/watch?v=y_1Kg45APko) But",
"[here](https://www.youtube.com/watch?v=y_1Kg45APko) But the question remains. The value `-0.572` corresponds close to `0,0` ?",
"playing around with the screws here is the result ``` +0.406 +0.127 +0.411",
"-0.012 +0.371 -1.208 -0.849 -0.351 ``` So should I tighten up the screw",
"around with the screws here is the result ``` +0.406 +0.127 +0.411 -0.161",
"the opposite to happen. For bed leveling i use a capacitive probe and",
"+0.281 +0.830 -0.614 -0.012 +0.371 -1.208 -0.849 -0.351 ``` So should I tighten",
"i use a capacitive probe and after playing around with the screws here",
"0,0 position or loosen it? I have a feeling that when I loosen",
"feeling that when I loosen it, it gets away from zero and I",
"or loosen it? I have a feeling that when I loosen it, it",
"it, it gets away from zero and I expect the opposite to happen.",
"that when I loosen it, it gets away from zero and I expect",
"loosen it? I have a feeling that when I loosen it, it gets",
"-0.652 -0.668 ``` Finally the leveling process was found [here](https://www.youtube.com/watch?v=y_1Kg45APko) But the question",
"use a capacitive probe and after playing around with the screws here is",
"-0.572 -0.652 -0.668 ``` Finally the leveling process was found [here](https://www.youtube.com/watch?v=y_1Kg45APko) But the",
"screw of the bed, close to 0,0 position or loosen it? I have",
"and I expect the opposite to happen. For bed leveling i use a",
"``` So should I tighten up the screw of the bed, close to",
"tighten up the screw of the bed, close to 0,0 position or loosen",
"probe and after playing around with the screws here is the result ```",
"-0.849 -0.351 ``` So should I tighten up the screw of the bed,",
"close to 0,0 position or loosen it? I have a feeling that when",
"when I loosen it, it gets away from zero and I expect the",
"-0.668 ``` Finally the leveling process was found [here](https://www.youtube.com/watch?v=y_1Kg45APko) But the question remains.",
"gets away from zero and I expect the opposite to happen. For bed",
"have a feeling that when I loosen it, it gets away from zero",
"to 0,0 position or loosen it? I have a feeling that when I",
"the result ``` +0.406 +0.127 +0.411 -0.161 -0.007 -0.041 -0.572 -0.652 -0.668 ```",
"+0.411 -0.161 -0.007 -0.041 -0.572 -0.652 -0.668 ``` Finally the leveling process was",
"-0.614 -0.012 +0.371 -1.208 -0.849 -0.351 ``` So should I tighten up the",
"capacitive probe and after playing around with the screws here is the result"
] |
[
"giving advice that I know nothing about 3D printers. This is the printer:",
"just received an old 3D printer from one of my school teachers. I",
"attached to it, or any other info about it. How can I find",
"know nothing about 3D printers. This is the printer: *Backside* [![Printer as seen",
"is the printer: *Backside* [![Printer as seen from the back](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen",
"from the back\")](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from the back\") *Front* [![Printer as seen",
"the back\")](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from the back\") *Front* [![Printer as seen from",
"no instruction manual attached to it, or any other info about it. How",
"as seen from the back](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from the back\")](https://i.stack.imgur.com/GC3mb.jpg \"Printer as",
"an old 3D printer from one of my school teachers. I have no",
"nothing about 3D printers. This is the printer: *Backside* [![Printer as seen from",
"seen from the front\") *The X-axis stepper* [![The X-axis stepper](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\")](https://i.stack.imgur.com/OXuiX.jpg",
"Remember when giving advice that I know nothing about 3D printers. This is",
"*Backside* [![Printer as seen from the back](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from the back\")](https://i.stack.imgur.com/GC3mb.jpg",
"as to which brand it is, no instruction manual attached to it, or",
"advice that I know nothing about 3D printers. This is the printer: *Backside*",
"printer: *Backside* [![Printer as seen from the back](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from the",
"This is the printer: *Backside* [![Printer as seen from the back](https://i.stack.imgur.com/GC3mb.jpg \"Printer as",
"as seen from the back\")](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from the back\") *Front* [![Printer",
"3D printers. This is the printer: *Backside* [![Printer as seen from the back](https://i.stack.imgur.com/GC3mb.jpg",
"the back\") *Front* [![Printer as seen from the front](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from",
"useful. Remember when giving advice that I know nothing about 3D printers. This",
"seen from the back](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from the back\")](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen",
"I know nothing about 3D printers. This is the printer: *Backside* [![Printer as",
"any other info about it. How can I find some information about it?",
"my school teachers. I have no idea whatsoever as to which brand it",
"stepper\") *The electronics board* [![The electronics board](https://i.stack.imgur.com/YTJwl.jpg \"The electronics board\")](https://i.stack.imgur.com/YTJwl.jpg \"The electronics board\")",
"the printer: *Backside* [![Printer as seen from the back](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from",
"*The X-axis stepper* [![The X-axis stepper](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\")](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\") *The",
"manual attached to it, or any other info about it. How can I",
"[![Printer as seen from the front](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from the front\")](https://i.stack.imgur.com/FmDtw.jpg \"Printer",
"the back](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from the back\")](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from the",
"stepper\")](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\") *The electronics board* [![The electronics board](https://i.stack.imgur.com/YTJwl.jpg \"The electronics board\")](https://i.stack.imgur.com/YTJwl.jpg",
"information about it? Some links would be very useful. Remember when giving advice",
"have no idea whatsoever as to which brand it is, no instruction manual",
"it? Some links would be very useful. Remember when giving advice that I",
"I just received an old 3D printer from one of my school teachers.",
"from one of my school teachers. I have no idea whatsoever as to",
"to which brand it is, no instruction manual attached to it, or any",
"back](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from the back\")](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from the back\")",
"[![The X-axis stepper](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\")](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\") *The electronics board* [![The",
"\"The X-axis stepper\") *The electronics board* [![The electronics board](https://i.stack.imgur.com/YTJwl.jpg \"The electronics board\")](https://i.stack.imgur.com/YTJwl.jpg \"The",
"links would be very useful. Remember when giving advice that I know nothing",
"of my school teachers. I have no idea whatsoever as to which brand",
"brand it is, no instruction manual attached to it, or any other info",
"old 3D printer from one of my school teachers. I have no idea",
"about it. How can I find some information about it? Some links would",
"would be very useful. Remember when giving advice that I know nothing about",
"the front](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from the front\")](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from the",
"\"Printer as seen from the back\") *Front* [![Printer as seen from the front](https://i.stack.imgur.com/FmDtw.jpg",
"front\") *The X-axis stepper* [![The X-axis stepper](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\")](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\")",
"stepper](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\")](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\") *The electronics board* [![The electronics board](https://i.stack.imgur.com/YTJwl.jpg",
"some information about it? Some links would be very useful. Remember when giving",
"from the back\") *Front* [![Printer as seen from the front](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen",
"about it? Some links would be very useful. Remember when giving advice that",
"the front\")](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from the front\") *The X-axis stepper* [![The X-axis",
"which brand it is, no instruction manual attached to it, or any other",
"school teachers. I have no idea whatsoever as to which brand it is,",
"the front\") *The X-axis stepper* [![The X-axis stepper](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\")](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis",
"to it, or any other info about it. How can I find some",
"back\")](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from the back\") *Front* [![Printer as seen from the",
"as seen from the back\") *Front* [![Printer as seen from the front](https://i.stack.imgur.com/FmDtw.jpg \"Printer",
"X-axis stepper* [![The X-axis stepper](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\")](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\") *The electronics",
"front](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from the front\")](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from the front\")",
"back\") *Front* [![Printer as seen from the front](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from the",
"info about it. How can I find some information about it? Some links",
"instruction manual attached to it, or any other info about it. How can",
"seen from the back\")](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from the back\") *Front* [![Printer as",
"I find some information about it? Some links would be very useful. Remember",
"Some links would be very useful. Remember when giving advice that I know",
"as seen from the front\")](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from the front\") *The X-axis",
"X-axis stepper](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\")](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\") *The electronics board* [![The electronics",
"it. How can I find some information about it? Some links would be",
"be very useful. Remember when giving advice that I know nothing about 3D",
"very useful. Remember when giving advice that I know nothing about 3D printers.",
"one of my school teachers. I have no idea whatsoever as to which",
"other info about it. How can I find some information about it? Some",
"it is, no instruction manual attached to it, or any other info about",
"\"Printer as seen from the back\")](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from the back\") *Front*",
"from the front](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from the front\")](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from",
"whatsoever as to which brand it is, no instruction manual attached to it,",
"from the front\") *The X-axis stepper* [![The X-axis stepper](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\")](https://i.stack.imgur.com/OXuiX.jpg \"The",
"or any other info about it. How can I find some information about",
"as seen from the front](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from the front\")](https://i.stack.imgur.com/FmDtw.jpg \"Printer as",
"that I know nothing about 3D printers. This is the printer: *Backside* [![Printer",
"How can I find some information about it? Some links would be very",
"when giving advice that I know nothing about 3D printers. This is the",
"3D printer from one of my school teachers. I have no idea whatsoever",
"seen from the back\") *Front* [![Printer as seen from the front](https://i.stack.imgur.com/FmDtw.jpg \"Printer as",
"find some information about it? Some links would be very useful. Remember when",
"printer from one of my school teachers. I have no idea whatsoever as",
"X-axis stepper\")](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\") *The electronics board* [![The electronics board](https://i.stack.imgur.com/YTJwl.jpg \"The electronics",
"no idea whatsoever as to which brand it is, no instruction manual attached",
"received an old 3D printer from one of my school teachers. I have",
"printers. This is the printer: *Backside* [![Printer as seen from the back](https://i.stack.imgur.com/GC3mb.jpg \"Printer",
"can I find some information about it? Some links would be very useful.",
"*Front* [![Printer as seen from the front](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from the front\")](https://i.stack.imgur.com/FmDtw.jpg",
"\"The X-axis stepper\")](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\") *The electronics board* [![The electronics board](https://i.stack.imgur.com/YTJwl.jpg \"The",
"from the front\")](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from the front\") *The X-axis stepper* [![The",
"about 3D printers. This is the printer: *Backside* [![Printer as seen from the",
"front\")](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from the front\") *The X-axis stepper* [![The X-axis stepper](https://i.stack.imgur.com/OXuiX.jpg",
"seen from the front\")](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from the front\") *The X-axis stepper*",
"X-axis stepper\") *The electronics board* [![The electronics board](https://i.stack.imgur.com/YTJwl.jpg \"The electronics board\")](https://i.stack.imgur.com/YTJwl.jpg \"The electronics",
"I have no idea whatsoever as to which brand it is, no instruction",
"idea whatsoever as to which brand it is, no instruction manual attached to",
"it, or any other info about it. How can I find some information",
"is, no instruction manual attached to it, or any other info about it.",
"seen from the front](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from the front\")](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen",
"\"Printer as seen from the front\")](https://i.stack.imgur.com/FmDtw.jpg \"Printer as seen from the front\") *The",
"[![Printer as seen from the back](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from the back\")](https://i.stack.imgur.com/GC3mb.jpg \"Printer",
"stepper* [![The X-axis stepper](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\")](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis stepper\") *The electronics board*",
"\"Printer as seen from the front\") *The X-axis stepper* [![The X-axis stepper](https://i.stack.imgur.com/OXuiX.jpg \"The",
"as seen from the front\") *The X-axis stepper* [![The X-axis stepper](https://i.stack.imgur.com/OXuiX.jpg \"The X-axis",
"from the back](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from the back\")](https://i.stack.imgur.com/GC3mb.jpg \"Printer as seen from",
"teachers. I have no idea whatsoever as to which brand it is, no"
] |
[
"same happens when push the \"confirm\", after the mesh bed leveling. I'd like",
"by the Anet A8 sample files built in with the firmware zip file.",
"I have an Anet A8, and recently updated the firmware to Marlin 1.1.8.",
"but, sometimes, right after finishing a printing (while doing the \"home all\"), the",
"the firmware zip file. Everything works fine but, sometimes, right after finishing a",
"all\"), the LCD shows some weird data, like this: [![LCD weird data](https://i.stack.imgur.com/8H1Vn.jpg \"LCD",
"updated the firmware to Marlin 1.1.8. My only change was replacing the configuration",
"after finishing a printing (while doing the \"home all\"), the LCD shows some",
"after the mesh bed leveling. I'd like to know why it happens. Is",
"file. Everything works fine but, sometimes, right after finishing a printing (while doing",
"a printing (while doing the \"home all\"), the LCD shows some weird data,",
"Anet A8 sample files built in with the firmware zip file. Everything works",
"only change was replacing the configuration files by the Anet A8 sample files",
"push the \"confirm\", after the mesh bed leveling. I'd like to know why",
"data](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\")](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\") The same happens when push the",
"sometimes, right after finishing a printing (while doing the \"home all\"), the LCD",
"works fine but, sometimes, right after finishing a printing (while doing the \"home",
"files built in with the firmware zip file. Everything works fine but, sometimes,",
"when push the \"confirm\", after the mesh bed leveling. I'd like to know",
"the firmware to Marlin 1.1.8. My only change was replacing the configuration files",
"zip file. Everything works fine but, sometimes, right after finishing a printing (while",
"weird data\") The same happens when push the \"confirm\", after the mesh bed",
"files by the Anet A8 sample files built in with the firmware zip",
"data, like this: [![LCD weird data](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\")](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\") The",
"this: [![LCD weird data](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\")](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\") The same happens",
"built in with the firmware zip file. Everything works fine but, sometimes, right",
"weird data](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\")](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\") The same happens when push",
"A8, and recently updated the firmware to Marlin 1.1.8. My only change was",
"the configuration files by the Anet A8 sample files built in with the",
"in with the firmware zip file. Everything works fine but, sometimes, right after",
"bed leveling. I'd like to know why it happens. Is it a Marlin",
"LCD shows some weird data, like this: [![LCD weird data](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\")](https://i.stack.imgur.com/8H1Vn.jpg",
"some weird data, like this: [![LCD weird data](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\")](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird",
"the Anet A8 sample files built in with the firmware zip file. Everything",
"[![LCD weird data](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\")](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\") The same happens when",
"shows some weird data, like this: [![LCD weird data](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\")](https://i.stack.imgur.com/8H1Vn.jpg \"LCD",
"change was replacing the configuration files by the Anet A8 sample files built",
"The same happens when push the \"confirm\", after the mesh bed leveling. I'd",
"like this: [![LCD weird data](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\")](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\") The same",
"Anet A8, and recently updated the firmware to Marlin 1.1.8. My only change",
"sample files built in with the firmware zip file. Everything works fine but,",
"1.1.8. My only change was replacing the configuration files by the Anet A8",
"happens when push the \"confirm\", after the mesh bed leveling. I'd like to",
"\"LCD weird data\") The same happens when push the \"confirm\", after the mesh",
"\"LCD weird data\")](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\") The same happens when push the \"confirm\",",
"and recently updated the firmware to Marlin 1.1.8. My only change was replacing",
"have an Anet A8, and recently updated the firmware to Marlin 1.1.8. My",
"firmware to Marlin 1.1.8. My only change was replacing the configuration files by",
"A8 sample files built in with the firmware zip file. Everything works fine",
"the LCD shows some weird data, like this: [![LCD weird data](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird",
"Everything works fine but, sometimes, right after finishing a printing (while doing the",
"configuration files by the Anet A8 sample files built in with the firmware",
"(while doing the \"home all\"), the LCD shows some weird data, like this:",
"the \"confirm\", after the mesh bed leveling. I'd like to know why it",
"My only change was replacing the configuration files by the Anet A8 sample",
"the \"home all\"), the LCD shows some weird data, like this: [![LCD weird",
"mesh bed leveling. I'd like to know why it happens. Is it a",
"an Anet A8, and recently updated the firmware to Marlin 1.1.8. My only",
"data\")](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\") The same happens when push the \"confirm\", after the",
"weird data, like this: [![LCD weird data](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\")](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\")",
"was replacing the configuration files by the Anet A8 sample files built in",
"finishing a printing (while doing the \"home all\"), the LCD shows some weird",
"right after finishing a printing (while doing the \"home all\"), the LCD shows",
"data\") The same happens when push the \"confirm\", after the mesh bed leveling.",
"with the firmware zip file. Everything works fine but, sometimes, right after finishing",
"\"confirm\", after the mesh bed leveling. I'd like to know why it happens.",
"\"home all\"), the LCD shows some weird data, like this: [![LCD weird data](https://i.stack.imgur.com/8H1Vn.jpg",
"doing the \"home all\"), the LCD shows some weird data, like this: [![LCD",
"weird data\")](https://i.stack.imgur.com/8H1Vn.jpg \"LCD weird data\") The same happens when push the \"confirm\", after",
"leveling. I'd like to know why it happens. Is it a Marlin bug?",
"the mesh bed leveling. I'd like to know why it happens. Is it",
"to Marlin 1.1.8. My only change was replacing the configuration files by the",
"Marlin 1.1.8. My only change was replacing the configuration files by the Anet",
"printing (while doing the \"home all\"), the LCD shows some weird data, like",
"fine but, sometimes, right after finishing a printing (while doing the \"home all\"),",
"replacing the configuration files by the Anet A8 sample files built in with",
"recently updated the firmware to Marlin 1.1.8. My only change was replacing the",
"firmware zip file. Everything works fine but, sometimes, right after finishing a printing"
] |
[
"the fuse I bought:* [![Picture of the fuse I bought](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the",
"showing the internals of the power supply unit:* [![PSU, cover removed showing fuse](https://i.stack.imgur.com/fYGTI.jpg",
"and turned it on and everything seemed fine until I started printing. It",
"it in, I just want to make sure this is the correct fuse",
"fuse blew. I have done some research on the issue and haven't had",
"in, I just want to make sure this is the correct fuse and",
"print. I didn't think anything of it, I just went back and tried",
"tried again, but this time right when I pressed start, the fuse blew.",
"up a Bussmann T5AL/250V fuse (photo attached below) and before I put it",
"(photo attached below) and before I put it in, I just want to",
"is to just replace the power supply fuse if possible. I went to",
"the correct fuse and I'm not going to kill the entire printer this",
"now though, my plan is to just replace the power supply fuse if",
"secondary fuse before the power supply (which I will be doing in the",
"I just went back and tried again, but this time right when I",
"picked up a Bussmann T5AL/250V fuse (photo attached below) and before I put",
"of the fuse I bought\") Any and all help is very much appreciated",
"together and turned it on and everything seemed fine until I started printing.",
"sure this is the correct fuse and I'm not going to kill the",
"get the first layer down when the screen reset and so did the",
"started printing. It didn't even get the first layer down when the screen",
"of it, I just went back and tried again, but this time right",
"[![PSU, cover removed showing fuse](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing fuse\")](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed",
"so did the print. I didn't think anything of it, I just went",
"and tried again, but this time right when I pressed start, the fuse",
"I bought](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse I bought\")](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse I",
"layer down when the screen reset and so did the print. I didn't",
"the issue and haven't had any luck besides recommendations for putting in a",
"pressed start, the fuse blew. I have done some research on the issue",
"fuse and I'm not going to kill the entire printer this time. *Picture",
"*Picture of the fuse I bought:* [![Picture of the fuse I bought](https://i.stack.imgur.com/QU6dU.jpg \"Picture",
"I went to the hardware store and picked up a Bussmann T5AL/250V fuse",
"on the issue and haven't had any luck besides recommendations for putting in",
"before the power supply (which I will be doing in the near future).",
"power supply fuse if possible. I went to the hardware store and picked",
"fuse (photo attached below) and before I put it in, I just want",
"and everything seemed fine until I started printing. It didn't even get the",
"cover removed showing fuse\")](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing fuse\") *Picture of the fuse",
"below) and before I put it in, I just want to make sure",
"fuse I bought\") Any and all help is very much appreciated because as",
"turned it on and everything seemed fine until I started printing. It didn't",
"plan is to just replace the power supply fuse if possible. I went",
"the print. I didn't think anything of it, I just went back and",
"even get the first layer down when the screen reset and so did",
"and picked up a Bussmann T5AL/250V fuse (photo attached below) and before I",
"and haven't had any luck besides recommendations for putting in a secondary fuse",
"and so did the print. I didn't think anything of it, I just",
"besides recommendations for putting in a secondary fuse before the power supply (which",
"make sure this is the correct fuse and I'm not going to kill",
"is very much appreciated because as you might expect, I'm not too happy",
"supply unit:* [![PSU, cover removed showing fuse](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing fuse\")](https://i.stack.imgur.com/fYGTI.jpg \"PSU,",
"put it in, I just want to make sure this is the correct",
"(which I will be doing in the near future). As for now though,",
"it on and everything seemed fine until I started printing. It didn't even",
"of the power supply unit:* [![PSU, cover removed showing fuse](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed",
"bought](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse I bought\")](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse I bought\")",
"removed showing fuse\")](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing fuse\") *Picture of the fuse I",
"in a secondary fuse before the power supply (which I will be doing",
"cover removed showing fuse\") *Picture of the fuse I bought:* [![Picture of the",
"start, the fuse blew. I have done some research on the issue and",
"attached below) and before I put it in, I just want to make",
"A little backstory to help you understand the situation. I put the 3D",
"unit:* [![PSU, cover removed showing fuse](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing fuse\")](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover",
"correct fuse and I'm not going to kill the entire printer this time.",
"I bought\") Any and all help is very much appreciated because as you",
"near future). As for now though, my plan is to just replace the",
"bought\")](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse I bought\") Any and all help is very",
"in the near future). As for now though, my plan is to just",
"just replace the power supply fuse if possible. I went to the hardware",
"T5AL/250V fuse (photo attached below) and before I put it in, I just",
"this is the correct fuse and I'm not going to kill the entire",
"hardware store and picked up a Bussmann T5AL/250V fuse (photo attached below) and",
"the first layer down when the screen reset and so did the print.",
"seemed fine until I started printing. It didn't even get the first layer",
"doing in the near future). As for now though, my plan is to",
"if possible. I went to the hardware store and picked up a Bussmann",
"when the screen reset and so did the print. I didn't think anything",
"the fuse I bought](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse I bought\")](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the",
"until I started printing. It didn't even get the first layer down when",
"I didn't think anything of it, I just went back and tried again,",
"printer this time. *Picture showing the internals of the power supply unit:* [![PSU,",
"*Picture showing the internals of the power supply unit:* [![PSU, cover removed showing",
"the power supply (which I will be doing in the near future). As",
"I pressed start, the fuse blew. I have done some research on the",
"it, I just went back and tried again, but this time right when",
"again, but this time right when I pressed start, the fuse blew. I",
"of the fuse I bought:* [![Picture of the fuse I bought](https://i.stack.imgur.com/QU6dU.jpg \"Picture of",
"[![Picture of the fuse I bought](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse I bought\")](https://i.stack.imgur.com/QU6dU.jpg \"Picture",
"backstory to help you understand the situation. I put the 3D printer together",
"put the 3D printer together and turned it on and everything seemed fine",
"very much appreciated because as you might expect, I'm not too happy with",
"help you understand the situation. I put the 3D printer together and turned",
"future). As for now though, my plan is to just replace the power",
"when I pressed start, the fuse blew. I have done some research on",
"the hardware store and picked up a Bussmann T5AL/250V fuse (photo attached below)",
"and all help is very much appreciated because as you might expect, I'm",
"Bussmann T5AL/250V fuse (photo attached below) and before I put it in, I",
"of the fuse I bought](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse I bought\")](https://i.stack.imgur.com/QU6dU.jpg \"Picture of",
"situation. I put the 3D printer together and turned it on and everything",
"the 3D printer together and turned it on and everything seemed fine until",
"issue and haven't had any luck besides recommendations for putting in a secondary",
"and I'm not going to kill the entire printer this time. *Picture showing",
"entire printer this time. *Picture showing the internals of the power supply unit:*",
"I bought:* [![Picture of the fuse I bought](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse I",
"fuse if possible. I went to the hardware store and picked up a",
"for now though, my plan is to just replace the power supply fuse",
"power supply (which I will be doing in the near future). As for",
"removed showing fuse](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing fuse\")](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing fuse\")",
"first layer down when the screen reset and so did the print. I",
"I'm not going to kill the entire printer this time. *Picture showing the",
"my plan is to just replace the power supply fuse if possible. I",
"fuse](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing fuse\")](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing fuse\") *Picture of",
"just want to make sure this is the correct fuse and I'm not",
"research on the issue and haven't had any luck besides recommendations for putting",
"have done some research on the issue and haven't had any luck besides",
"haven't had any luck besides recommendations for putting in a secondary fuse before",
"the near future). As for now though, my plan is to just replace",
"for putting in a secondary fuse before the power supply (which I will",
"much appreciated because as you might expect, I'm not too happy with the",
"to the hardware store and picked up a Bussmann T5AL/250V fuse (photo attached",
"is the correct fuse and I'm not going to kill the entire printer",
"showing fuse](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing fuse\")](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing fuse\") *Picture",
"done some research on the issue and haven't had any luck besides recommendations",
"3D printer together and turned it on and everything seemed fine until I",
"the fuse blew. I have done some research on the issue and haven't",
"the power supply unit:* [![PSU, cover removed showing fuse](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing",
"this time right when I pressed start, the fuse blew. I have done",
"fuse I bought:* [![Picture of the fuse I bought](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse",
"because as you might expect, I'm not too happy with the printer so",
"printing. It didn't even get the first layer down when the screen reset",
"right when I pressed start, the fuse blew. I have done some research",
"\"Picture of the fuse I bought\") Any and all help is very much",
"any luck besides recommendations for putting in a secondary fuse before the power",
"little backstory to help you understand the situation. I put the 3D printer",
"I will be doing in the near future). As for now though, my",
"putting in a secondary fuse before the power supply (which I will be",
"went to the hardware store and picked up a Bussmann T5AL/250V fuse (photo",
"bought:* [![Picture of the fuse I bought](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse I bought\")](https://i.stack.imgur.com/QU6dU.jpg",
"had any luck besides recommendations for putting in a secondary fuse before the",
"some research on the issue and haven't had any luck besides recommendations for",
"fuse I bought\")](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse I bought\") Any and all help",
"a secondary fuse before the power supply (which I will be doing in",
"didn't think anything of it, I just went back and tried again, but",
"I put the 3D printer together and turned it on and everything seemed",
"showing fuse\") *Picture of the fuse I bought:* [![Picture of the fuse I",
"bought\") Any and all help is very much appreciated because as you might",
"possible. I went to the hardware store and picked up a Bussmann T5AL/250V",
"fuse\")](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing fuse\") *Picture of the fuse I bought:* [![Picture",
"down when the screen reset and so did the print. I didn't think",
"reset and so did the print. I didn't think anything of it, I",
"as you might expect, I'm not too happy with the printer so far.",
"the entire printer this time. *Picture showing the internals of the power supply",
"supply fuse if possible. I went to the hardware store and picked up",
"the fuse I bought\") Any and all help is very much appreciated because",
"the situation. I put the 3D printer together and turned it on and",
"luck besides recommendations for putting in a secondary fuse before the power supply",
"everything seemed fine until I started printing. It didn't even get the first",
"will be doing in the near future). As for now though, my plan",
"though, my plan is to just replace the power supply fuse if possible.",
"to just replace the power supply fuse if possible. I went to the",
"It didn't even get the first layer down when the screen reset and",
"understand the situation. I put the 3D printer together and turned it on",
"a Bussmann T5AL/250V fuse (photo attached below) and before I put it in,",
"\"PSU, cover removed showing fuse\")](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing fuse\") *Picture of the",
"removed showing fuse\") *Picture of the fuse I bought:* [![Picture of the fuse",
"the power supply fuse if possible. I went to the hardware store and",
"before I put it in, I just want to make sure this is",
"I bought\")](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse I bought\") Any and all help is",
"supply (which I will be doing in the near future). As for now",
"the fuse I bought\")](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse I bought\") Any and all",
"didn't even get the first layer down when the screen reset and so",
"to make sure this is the correct fuse and I'm not going to",
"did the print. I didn't think anything of it, I just went back",
"kill the entire printer this time. *Picture showing the internals of the power",
"went back and tried again, but this time right when I pressed start,",
"fuse\") *Picture of the fuse I bought:* [![Picture of the fuse I bought](https://i.stack.imgur.com/QU6dU.jpg",
"to help you understand the situation. I put the 3D printer together and",
"not going to kill the entire printer this time. *Picture showing the internals",
"appreciated because as you might expect, I'm not too happy with the printer",
"\"PSU, cover removed showing fuse\") *Picture of the fuse I bought:* [![Picture of",
"blew. I have done some research on the issue and haven't had any",
"fuse before the power supply (which I will be doing in the near",
"all help is very much appreciated because as you might expect, I'm not",
"showing fuse\")](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing fuse\") *Picture of the fuse I bought:*",
"fine until I started printing. It didn't even get the first layer down",
"just went back and tried again, but this time right when I pressed",
"but this time right when I pressed start, the fuse blew. I have",
"cover removed showing fuse](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing fuse\")](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing",
"Any and all help is very much appreciated because as you might expect,",
"printer together and turned it on and everything seemed fine until I started",
"replace the power supply fuse if possible. I went to the hardware store",
"time. *Picture showing the internals of the power supply unit:* [![PSU, cover removed",
"I just want to make sure this is the correct fuse and I'm",
"of the fuse I bought\")](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse I bought\") Any and",
"time right when I pressed start, the fuse blew. I have done some",
"the screen reset and so did the print. I didn't think anything of",
"you understand the situation. I put the 3D printer together and turned it",
"power supply unit:* [![PSU, cover removed showing fuse](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover removed showing fuse\")](https://i.stack.imgur.com/fYGTI.jpg",
"screen reset and so did the print. I didn't think anything of it,",
"and before I put it in, I just want to make sure this",
"think anything of it, I just went back and tried again, but this",
"recommendations for putting in a secondary fuse before the power supply (which I",
"be doing in the near future). As for now though, my plan is",
"As for now though, my plan is to just replace the power supply",
"want to make sure this is the correct fuse and I'm not going",
"back and tried again, but this time right when I pressed start, the",
"internals of the power supply unit:* [![PSU, cover removed showing fuse](https://i.stack.imgur.com/fYGTI.jpg \"PSU, cover",
"store and picked up a Bussmann T5AL/250V fuse (photo attached below) and before",
"to kill the entire printer this time. *Picture showing the internals of the",
"I started printing. It didn't even get the first layer down when the",
"anything of it, I just went back and tried again, but this time",
"\"Picture of the fuse I bought\")](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse I bought\") Any",
"help is very much appreciated because as you might expect, I'm not too",
"I put it in, I just want to make sure this is the",
"this time. *Picture showing the internals of the power supply unit:* [![PSU, cover",
"fuse I bought](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse I bought\")](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the fuse",
"the internals of the power supply unit:* [![PSU, cover removed showing fuse](https://i.stack.imgur.com/fYGTI.jpg \"PSU,",
"I have done some research on the issue and haven't had any luck",
"on and everything seemed fine until I started printing. It didn't even get",
"going to kill the entire printer this time. *Picture showing the internals of"
] |
[
"am printing from an SD card as I always have. I changed SD",
"and it will over advance the Y axis. This behavior was preceded by",
"I checked the G-code and all the commands including the E commands seem",
"auto homing. Using the position commands I can advance the X and Y",
"stepper motor stopped feeding shortly after the print started. I am printing from",
"feeding shortly after the print started. I am printing from an SD card",
"I always have. I changed SD cards thinking it might be a connection",
"as I always have. I changed SD cards thinking it might be a",
"electrical connections - they seem to be fine. Any suggestions to solve this?",
"unusual noise and it will over advance the Y axis. This behavior was",
"able to resolve. Today it suddenly stopped auto homing. Using the position commands",
"an SD card as I always have. I changed SD cards thinking it",
"a connection problem and I checked the G-code and all the commands including",
"the Y stepper motor makes an unusual noise and it will over advance",
"but the stepper motor stopped feeding shortly after the print started. I am",
"behavior was preceded by a feed fault. The print started fine but the",
"but none that I haven't been able to resolve. Today it suddenly stopped",
"problem and I checked the G-code and all the commands including the E",
"and all the commands including the E commands seem to be there. I",
"it will over advance the Y axis. This behavior was preceded by a",
"the carriages before turning the printer on). Also the Y stepper motor makes",
"card as I always have. I changed SD cards thinking it might be",
"the G-code and all the commands including the E commands seem to be",
"Y positively but not negatively (after I manually re-position the carriages before turning",
"I manually re-position the carriages before turning the printer on). Also the Y",
"checked the G-code and all the commands including the E commands seem to",
"A few problems but none that I haven't been able to resolve. Today",
"was preceded by a feed fault. The print started fine but the stepper",
"connection problem and I checked the G-code and all the commands including the",
"the Y axis. This behavior was preceded by a feed fault. The print",
"SD cards thinking it might be a connection problem and I checked the",
"print started. I am printing from an SD card as I always have.",
"the print started. I am printing from an SD card as I always",
"carriages before turning the printer on). Also the Y stepper motor makes an",
"makes an unusual noise and it will over advance the Y axis. This",
"(after I manually re-position the carriages before turning the printer on). Also the",
"resolve. Today it suddenly stopped auto homing. Using the position commands I can",
"over advance the Y axis. This behavior was preceded by a feed fault.",
"homing. Using the position commands I can advance the X and Y positively",
"on). Also the Y stepper motor makes an unusual noise and it will",
"using my Anet A2 for about a year. A few problems but none",
"be a connection problem and I checked the G-code and all the commands",
"re-position the carriages before turning the printer on). Also the Y stepper motor",
"fine but the stepper motor stopped feeding shortly after the print started. I",
"negatively (after I manually re-position the carriages before turning the printer on). Also",
"thinking it might be a connection problem and I checked the G-code and",
"advance the Y axis. This behavior was preceded by a feed fault. The",
"the commands including the E commands seem to be there. I have checked",
"the position commands I can advance the X and Y positively but not",
"to be there. I have checked all the electrical connections - they seem",
"and Y positively but not negatively (after I manually re-position the carriages before",
"year. A few problems but none that I haven't been able to resolve.",
"feed fault. The print started fine but the stepper motor stopped feeding shortly",
"a year. A few problems but none that I haven't been able to",
"turning the printer on). Also the Y stepper motor makes an unusual noise",
"motor stopped feeding shortly after the print started. I am printing from an",
"stepper motor makes an unusual noise and it will over advance the Y",
"G-code and all the commands including the E commands seem to be there.",
"problems but none that I haven't been able to resolve. Today it suddenly",
"motor makes an unusual noise and it will over advance the Y axis.",
"been using my Anet A2 for about a year. A few problems but",
"after the print started. I am printing from an SD card as I",
"Y stepper motor makes an unusual noise and it will over advance the",
"fault. The print started fine but the stepper motor stopped feeding shortly after",
"will over advance the Y axis. This behavior was preceded by a feed",
"the X and Y positively but not negatively (after I manually re-position the",
"Using the position commands I can advance the X and Y positively but",
"Also the Y stepper motor makes an unusual noise and it will over",
"X and Y positively but not negatively (after I manually re-position the carriages",
"have checked all the electrical connections - they seem to be fine. Any",
"not negatively (after I manually re-position the carriages before turning the printer on).",
"noise and it will over advance the Y axis. This behavior was preceded",
"have. I changed SD cards thinking it might be a connection problem and",
"all the commands including the E commands seem to be there. I have",
"including the E commands seem to be there. I have checked all the",
"A2 for about a year. A few problems but none that I haven't",
"and I checked the G-code and all the commands including the E commands",
"seem to be there. I have checked all the electrical connections - they",
"few problems but none that I haven't been able to resolve. Today it",
"preceded by a feed fault. The print started fine but the stepper motor",
"cards thinking it might be a connection problem and I checked the G-code",
"that I haven't been able to resolve. Today it suddenly stopped auto homing.",
"stopped feeding shortly after the print started. I am printing from an SD",
"printer on). Also the Y stepper motor makes an unusual noise and it",
"my Anet A2 for about a year. A few problems but none that",
"to resolve. Today it suddenly stopped auto homing. Using the position commands I",
"shortly after the print started. I am printing from an SD card as",
"checked all the electrical connections - they seem to be fine. Any suggestions",
"an unusual noise and it will over advance the Y axis. This behavior",
"be there. I have checked all the electrical connections - they seem to",
"position commands I can advance the X and Y positively but not negatively",
"before turning the printer on). Also the Y stepper motor makes an unusual",
"Anet A2 for about a year. A few problems but none that I",
"can advance the X and Y positively but not negatively (after I manually",
"the E commands seem to be there. I have checked all the electrical",
"by a feed fault. The print started fine but the stepper motor stopped",
"from an SD card as I always have. I changed SD cards thinking",
"print started fine but the stepper motor stopped feeding shortly after the print",
"suddenly stopped auto homing. Using the position commands I can advance the X",
"positively but not negatively (after I manually re-position the carriages before turning the",
"the stepper motor stopped feeding shortly after the print started. I am printing",
"it suddenly stopped auto homing. Using the position commands I can advance the",
"a feed fault. The print started fine but the stepper motor stopped feeding",
"it might be a connection problem and I checked the G-code and all",
"about a year. A few problems but none that I haven't been able",
"might be a connection problem and I checked the G-code and all the",
"haven't been able to resolve. Today it suddenly stopped auto homing. Using the",
"the electrical connections - they seem to be fine. Any suggestions to solve",
"advance the X and Y positively but not negatively (after I manually re-position",
"the printer on). Also the Y stepper motor makes an unusual noise and",
"none that I haven't been able to resolve. Today it suddenly stopped auto",
"stopped auto homing. Using the position commands I can advance the X and",
"I am printing from an SD card as I always have. I changed",
"I have been using my Anet A2 for about a year. A few",
"have been using my Anet A2 for about a year. A few problems",
"all the electrical connections - they seem to be fine. Any suggestions to",
"I have checked all the electrical connections - they seem to be fine.",
"there. I have checked all the electrical connections - they seem to be",
"commands I can advance the X and Y positively but not negatively (after",
"I haven't been able to resolve. Today it suddenly stopped auto homing. Using",
"E commands seem to be there. I have checked all the electrical connections",
"SD card as I always have. I changed SD cards thinking it might",
"Y axis. This behavior was preceded by a feed fault. The print started",
"started fine but the stepper motor stopped feeding shortly after the print started.",
"changed SD cards thinking it might be a connection problem and I checked",
"always have. I changed SD cards thinking it might be a connection problem",
"been able to resolve. Today it suddenly stopped auto homing. Using the position",
"commands seem to be there. I have checked all the electrical connections -",
"Today it suddenly stopped auto homing. Using the position commands I can advance",
"manually re-position the carriages before turning the printer on). Also the Y stepper",
"The print started fine but the stepper motor stopped feeding shortly after the",
"printing from an SD card as I always have. I changed SD cards",
"for about a year. A few problems but none that I haven't been",
"I can advance the X and Y positively but not negatively (after I",
"commands including the E commands seem to be there. I have checked all",
"This behavior was preceded by a feed fault. The print started fine but",
"started. I am printing from an SD card as I always have. I",
"but not negatively (after I manually re-position the carriages before turning the printer",
"I changed SD cards thinking it might be a connection problem and I",
"axis. This behavior was preceded by a feed fault. The print started fine"
] |
[
"solution? *I don't want to damage (my only) 3D printer for this project.*",
"the question is: Can it handle at least four days of continuous load",
"continuous load or should I search for an alternate solution? *I don't want",
"it handle at least four days of continuous load or should I search",
"of continuous load or should I search for an alternate solution? *I don't",
"I search for an alternate solution? *I don't want to damage (my only)",
"handle at least four days of continuous load or should I search for",
"an incoming project and the only 3D printer available to me is the",
"I have an incoming project and the only 3D printer available to me",
"have an incoming project and the only 3D printer available to me is",
"available to me is the TronXY X1. So the question is: Can it",
"at least four days of continuous load or should I search for an",
"or should I search for an alternate solution? *I don't want to damage",
"TronXY X1. So the question is: Can it handle at least four days",
"X1. So the question is: Can it handle at least four days of",
"to me is the TronXY X1. So the question is: Can it handle",
"for an alternate solution? *I don't want to damage (my only) 3D printer",
"Can it handle at least four days of continuous load or should I",
"incoming project and the only 3D printer available to me is the TronXY",
"should I search for an alternate solution? *I don't want to damage (my",
"question is: Can it handle at least four days of continuous load or",
"is: Can it handle at least four days of continuous load or should",
"four days of continuous load or should I search for an alternate solution?",
"the TronXY X1. So the question is: Can it handle at least four",
"only 3D printer available to me is the TronXY X1. So the question",
"the only 3D printer available to me is the TronXY X1. So the",
"3D printer available to me is the TronXY X1. So the question is:",
"search for an alternate solution? *I don't want to damage (my only) 3D",
"printer available to me is the TronXY X1. So the question is: Can",
"alternate solution? *I don't want to damage (my only) 3D printer for this",
"me is the TronXY X1. So the question is: Can it handle at",
"project and the only 3D printer available to me is the TronXY X1.",
"and the only 3D printer available to me is the TronXY X1. So",
"So the question is: Can it handle at least four days of continuous",
"load or should I search for an alternate solution? *I don't want to",
"an alternate solution? *I don't want to damage (my only) 3D printer for",
"least four days of continuous load or should I search for an alternate",
"is the TronXY X1. So the question is: Can it handle at least",
"days of continuous load or should I search for an alternate solution? *I"
] |
[
"alloy Heatblock (right)](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu Heatblock (left) and Copper alloy heatblock",
"I was not able to print my PETG (Colorfabb XT filament) below 270°C",
"piece, first picture, first piece, second picture). I use Cura, so I activated",
"PETG/XT? I did not discover such behavior with PLA or ABS in the",
"I replaced the cheap aluminum heat block with a copper alloy based one.",
"from a 0.4 to a 0.5 mm nozzle. Because of the backpressure I",
"I activated retraction with the feature to prime after travel moves. I got",
"past. Current Site Advice: Despite the weight, copper heat blocks seem to be",
"alloy heatblock (right)\")](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu Heatblock (left) and Copper alloy heatblock",
"the cheap aluminum heat block with a copper alloy based one. After that",
"The left print below shows the result. I disassembled the hotend, there was",
"issue with the old BQ hotend. [![Prints using BQ Alu Heatblock (left) and",
"Question: Is this underextrusion after travel moves normal for PETG/XT? I did not",
"travel moves normal for PETG/XT? I did not discover such behavior with PLA",
"shows the result. I disassembled the hotend, there was no leak or whatsoever.",
"work anymore. I had to greatly enhance the d-term, otherwise there was a",
"a serious heat conducting issue with the old BQ hotend. [![Prints using BQ",
"old BQ hotend. [![Prints using BQ Alu Heatblock (left) and Copper alloy Heatblock",
"it became better. However, I noticed that I still have severe underextrusion after",
"nozzle. Because of the backpressure I was not able to print my PETG",
"based one. After that my PIDs did not work anymore. I had to",
"piece, second picture). I use Cura, so I activated retraction with the feature",
"retraction with the feature to prime after travel moves. I got the wall",
"use Cura, so I activated retraction with the feature to prime after travel",
"(left) and Copper alloy Heatblock (right)](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu Heatblock (left) and",
"hotend, there was no leak or whatsoever. Maybe it was too cold for",
"However, the temperature displayed was 250°C. Then I replaced the cheap aluminum heat",
"alloy based one. After that my PIDs did not work anymore. I had",
"had to greatly enhance the d-term, otherwise there was a big overshoot. Guess",
"prime after travel moves. I got the wall closed just after 0.35 mm³.",
"after travel moves. I got the wall closed just after 0.35 mm³. [![Prints",
"did not work anymore. I had to greatly enhance the d-term, otherwise there",
"which caused unresolvable oozing. After that I was able to extrude till 230°C.",
"Copper alloy heatblock (right)\")](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu Heatblock (left) and Copper alloy",
"Current Site Advice: Despite the weight, copper heat blocks seem to be worth",
"travel moves (second piece, first picture, first piece, second picture). I use Cura,",
"there was a big overshoot. Guess there was a serious heat conducting issue",
"have severe underextrusion after travel moves (second piece, first picture, first piece, second",
"Firstly, I changed from a 0.4 to a 0.5 mm nozzle. Because of",
"not work anymore. I had to greatly enhance the d-term, otherwise there was",
"using Copper alloy Heatblock (left)](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy Heatblock (left)\")](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using",
"I had to greatly enhance the d-term, otherwise there was a big overshoot.",
"this underextrusion after travel moves normal for PETG/XT? I did not discover such",
"that I still have severe underextrusion after travel moves (second piece, first picture,",
"After that I was able to extrude till 230°C. The left print below",
"alloy Heatblock (left)\")](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy Heatblock (left)\") My Question: Is this",
"print my PETG (Colorfabb XT filament) below 270°C which caused unresolvable oozing. After",
"the hotend, there was no leak or whatsoever. Maybe it was too cold",
"BQ Alu Heatblock (left) and Copper alloy heatblock (right)\") Anyway, from there it",
"(left)](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy Heatblock (left)\")](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy Heatblock (left)\")",
"Copper alloy heatblock (right)\") Anyway, from there it became better. However, I noticed",
"and Copper alloy heatblock (right)\")](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu Heatblock (left) and Copper",
"\"Prints using BQ Alu Heatblock (left) and Copper alloy heatblock (right)\")](https://i.stack.imgur.com/uxd43.jpg \"Prints using",
"there was no leak or whatsoever. Maybe it was too cold for printing.",
"BQ Alu Heatblock (left) and Copper alloy heatblock (right)\")](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu",
"BQ Alu Heatblock (left) and Copper alloy Heatblock (right)](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu",
"oozing. After that I was able to extrude till 230°C. The left print",
"several issues which seem to have been lowered. Firstly, I changed from a",
"there was a serious heat conducting issue with the old BQ hotend. [![Prints",
"not able to print my PETG (Colorfabb XT filament) below 270°C which caused",
"Advice: Despite the weight, copper heat blocks seem to be worth the upgrade.",
"travel moves. I got the wall closed just after 0.35 mm³. [![Prints using",
"After that my PIDs did not work anymore. I had to greatly enhance",
"and Copper alloy heatblock (right)\") Anyway, from there it became better. However, I",
"Heatblock (left)\")](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy Heatblock (left)\") My Question: Is this underextrusion",
"Is this underextrusion after travel moves normal for PETG/XT? I did not discover",
"the past. Current Site Advice: Despite the weight, copper heat blocks seem to",
"I disassembled the hotend, there was no leak or whatsoever. Maybe it was",
"lowered. Firstly, I changed from a 0.4 to a 0.5 mm nozzle. Because",
"cheap aluminum heat block with a copper alloy based one. After that my",
"Guess there was a serious heat conducting issue with the old BQ hotend.",
"been lowered. Firstly, I changed from a 0.4 to a 0.5 mm nozzle.",
"moves (second piece, first picture, first piece, second picture). I use Cura, so",
"or ABS in the past. Current Site Advice: Despite the weight, copper heat",
"first picture, first piece, second picture). I use Cura, so I activated retraction",
"I was able to extrude till 230°C. The left print below shows the",
"there it became better. However, I noticed that I still have severe underextrusion",
"d-term, otherwise there was a big overshoot. Guess there was a serious heat",
"second picture). I use Cura, so I activated retraction with the feature to",
"first piece, second picture). I use Cura, so I activated retraction with the",
"issues which seem to have been lowered. Firstly, I changed from a 0.4",
"whatsoever. Maybe it was too cold for printing. However, the temperature displayed was",
"to extrude till 230°C. The left print below shows the result. I disassembled",
"I came across several issues which seem to have been lowered. Firstly, I",
"Alu Heatblock (left) and Copper alloy heatblock (right)\")](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu Heatblock",
"that I was able to extrude till 230°C. The left print below shows",
"using BQ Alu Heatblock (left) and Copper alloy heatblock (right)\") Anyway, from there",
"leak or whatsoever. Maybe it was too cold for printing. However, the temperature",
"one. After that my PIDs did not work anymore. I had to greatly",
"noticed that I still have severe underextrusion after travel moves (second piece, first",
"severe underextrusion after travel moves (second piece, first picture, first piece, second picture).",
"in the past. Current Site Advice: Despite the weight, copper heat blocks seem",
"using Copper alloy Heatblock (left)\") My Question: Is this underextrusion after travel moves",
"my PETG (Colorfabb XT filament) below 270°C which caused unresolvable oozing. After that",
"not discover such behavior with PLA or ABS in the past. Current Site",
"with a copper alloy based one. After that my PIDs did not work",
"that my PIDs did not work anymore. I had to greatly enhance the",
"to a 0.5 mm nozzle. Because of the backpressure I was not able",
"was not able to print my PETG (Colorfabb XT filament) below 270°C which",
"I changed from a 0.4 to a 0.5 mm nozzle. Because of the",
"filament) below 270°C which caused unresolvable oozing. After that I was able to",
"underextrusion after travel moves normal for PETG/XT? I did not discover such behavior",
"backpressure I was not able to print my PETG (Colorfabb XT filament) below",
"Site Advice: Despite the weight, copper heat blocks seem to be worth the",
"picture). I use Cura, so I activated retraction with the feature to prime",
"normal for PETG/XT? I did not discover such behavior with PLA or ABS",
"came across several issues which seem to have been lowered. Firstly, I changed",
"copper alloy based one. After that my PIDs did not work anymore. I",
"(right)\")](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu Heatblock (left) and Copper alloy heatblock (right)\") Anyway,",
"my PIDs did not work anymore. I had to greatly enhance the d-term,",
"which seem to have been lowered. Firstly, I changed from a 0.4 to",
"and Copper alloy Heatblock (right)](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu Heatblock (left) and Copper",
"Heatblock (left) and Copper alloy Heatblock (right)](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu Heatblock (left)",
"\"Prints using BQ Alu Heatblock (left) and Copper alloy heatblock (right)\") Anyway, from",
"anymore. I had to greatly enhance the d-term, otherwise there was a big",
"just after 0.35 mm³. [![Prints using Copper alloy Heatblock (left)](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper",
"PETG (Colorfabb XT filament) below 270°C which caused unresolvable oozing. After that I",
"a copper alloy based one. After that my PIDs did not work anymore.",
"was no leak or whatsoever. Maybe it was too cold for printing. However,",
"Alu Heatblock (left) and Copper alloy Heatblock (right)](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu Heatblock",
"overshoot. Guess there was a serious heat conducting issue with the old BQ",
"was able to extrude till 230°C. The left print below shows the result.",
"was 250°C. Then I replaced the cheap aluminum heat block with a copper",
"moves normal for PETG/XT? I did not discover such behavior with PLA or",
"after travel moves normal for PETG/XT? I did not discover such behavior with",
"have been lowered. Firstly, I changed from a 0.4 to a 0.5 mm",
"cold for printing. However, the temperature displayed was 250°C. Then I replaced the",
"otherwise there was a big overshoot. Guess there was a serious heat conducting",
"hotend. [![Prints using BQ Alu Heatblock (left) and Copper alloy Heatblock (right)](https://i.stack.imgur.com/uxd43.jpg \"Prints",
"(left) and Copper alloy heatblock (right)\")](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu Heatblock (left) and",
"(right)\") Anyway, from there it became better. However, I noticed that I still",
"I use Cura, so I activated retraction with the feature to prime after",
"till 230°C. The left print below shows the result. I disassembled the hotend,",
"wall closed just after 0.35 mm³. [![Prints using Copper alloy Heatblock (left)](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints",
"\"Prints using Copper alloy Heatblock (left)\") My Question: Is this underextrusion after travel",
"My Question: Is this underextrusion after travel moves normal for PETG/XT? I did",
"so I activated retraction with the feature to prime after travel moves. I",
"was a serious heat conducting issue with the old BQ hotend. [![Prints using",
"270°C which caused unresolvable oozing. After that I was able to extrude till",
"a 0.5 mm nozzle. Because of the backpressure I was not able to",
"unresolvable oozing. After that I was able to extrude till 230°C. The left",
"with PLA or ABS in the past. Current Site Advice: Despite the weight,",
"Cura, so I activated retraction with the feature to prime after travel moves.",
"I got the wall closed just after 0.35 mm³. [![Prints using Copper alloy",
"250°C. Then I replaced the cheap aluminum heat block with a copper alloy",
"the d-term, otherwise there was a big overshoot. Guess there was a serious",
"result. I disassembled the hotend, there was no leak or whatsoever. Maybe it",
"Heatblock (right)](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu Heatblock (left) and Copper alloy heatblock (right)\")](https://i.stack.imgur.com/uxd43.jpg",
"heat conducting issue with the old BQ hotend. [![Prints using BQ Alu Heatblock",
"discover such behavior with PLA or ABS in the past. Current Site Advice:",
"\"Prints using Copper alloy Heatblock (left)\")](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy Heatblock (left)\") My",
"such behavior with PLA or ABS in the past. Current Site Advice: Despite",
"to print my PETG (Colorfabb XT filament) below 270°C which caused unresolvable oozing.",
"Then I replaced the cheap aluminum heat block with a copper alloy based",
"was a big overshoot. Guess there was a serious heat conducting issue with",
"better. However, I noticed that I still have severe underextrusion after travel moves",
"alloy Heatblock (left)](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy Heatblock (left)\")](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy",
"mm³. [![Prints using Copper alloy Heatblock (left)](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy Heatblock (left)\")](https://i.stack.imgur.com/Oj1Ey.jpg",
"0.5 mm nozzle. Because of the backpressure I was not able to print",
"Because of the backpressure I was not able to print my PETG (Colorfabb",
"the temperature displayed was 250°C. Then I replaced the cheap aluminum heat block",
"closed just after 0.35 mm³. [![Prints using Copper alloy Heatblock (left)](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using",
"was too cold for printing. However, the temperature displayed was 250°C. Then I",
"aluminum heat block with a copper alloy based one. After that my PIDs",
"still have severe underextrusion after travel moves (second piece, first picture, first piece,",
"Heatblock (left)](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy Heatblock (left)\")](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy Heatblock",
"caused unresolvable oozing. After that I was able to extrude till 230°C. The",
"after 0.35 mm³. [![Prints using Copper alloy Heatblock (left)](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy",
"from there it became better. However, I noticed that I still have severe",
"changed from a 0.4 to a 0.5 mm nozzle. Because of the backpressure",
"PLA or ABS in the past. Current Site Advice: Despite the weight, copper",
"a 0.4 to a 0.5 mm nozzle. Because of the backpressure I was",
"heatblock (right)\")](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu Heatblock (left) and Copper alloy heatblock (right)\")",
"got the wall closed just after 0.35 mm³. [![Prints using Copper alloy Heatblock",
"below shows the result. I disassembled the hotend, there was no leak or",
"heat block with a copper alloy based one. After that my PIDs did",
"or whatsoever. Maybe it was too cold for printing. However, the temperature displayed",
"Anyway, from there it became better. However, I noticed that I still have",
"I did not discover such behavior with PLA or ABS in the past.",
"it was too cold for printing. However, the temperature displayed was 250°C. Then",
"Heatblock (left)\") My Question: Is this underextrusion after travel moves normal for PETG/XT?",
"the result. I disassembled the hotend, there was no leak or whatsoever. Maybe",
"for printing. However, the temperature displayed was 250°C. Then I replaced the cheap",
"alloy heatblock (right)\") Anyway, from there it became better. However, I noticed that",
"underextrusion after travel moves (second piece, first picture, first piece, second picture). I",
"to have been lowered. Firstly, I changed from a 0.4 to a 0.5",
"(Colorfabb XT filament) below 270°C which caused unresolvable oozing. After that I was",
"for PETG/XT? I did not discover such behavior with PLA or ABS in",
"extrude till 230°C. The left print below shows the result. I disassembled the",
"230°C. The left print below shows the result. I disassembled the hotend, there",
"Copper alloy Heatblock (right)](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu Heatblock (left) and Copper alloy",
"Heatblock (left) and Copper alloy heatblock (right)\") Anyway, from there it became better.",
"printing. However, the temperature displayed was 250°C. Then I replaced the cheap aluminum",
"using BQ Alu Heatblock (left) and Copper alloy Heatblock (right)](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ",
"greatly enhance the d-term, otherwise there was a big overshoot. Guess there was",
"block with a copper alloy based one. After that my PIDs did not",
"a big overshoot. Guess there was a serious heat conducting issue with the",
"Maybe it was too cold for printing. However, the temperature displayed was 250°C.",
"[![Prints using BQ Alu Heatblock (left) and Copper alloy Heatblock (right)](https://i.stack.imgur.com/uxd43.jpg \"Prints using",
"displayed was 250°C. Then I replaced the cheap aluminum heat block with a",
"enhance the d-term, otherwise there was a big overshoot. Guess there was a",
"heatblock (right)\") Anyway, from there it became better. However, I noticed that I",
"I noticed that I still have severe underextrusion after travel moves (second piece,",
"below 270°C which caused unresolvable oozing. After that I was able to extrude",
"However, I noticed that I still have severe underextrusion after travel moves (second",
"the backpressure I was not able to print my PETG (Colorfabb XT filament)",
"conducting issue with the old BQ hotend. [![Prints using BQ Alu Heatblock (left)",
"picture, first piece, second picture). I use Cura, so I activated retraction with",
"of the backpressure I was not able to print my PETG (Colorfabb XT",
"mm nozzle. Because of the backpressure I was not able to print my",
"Copper alloy Heatblock (left)\") My Question: Is this underextrusion after travel moves normal",
"(right)](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu Heatblock (left) and Copper alloy heatblock (right)\")](https://i.stack.imgur.com/uxd43.jpg \"Prints",
"(second piece, first picture, first piece, second picture). I use Cura, so I",
"became better. However, I noticed that I still have severe underextrusion after travel",
"able to extrude till 230°C. The left print below shows the result. I",
"alloy Heatblock (left)\") My Question: Is this underextrusion after travel moves normal for",
"left print below shows the result. I disassembled the hotend, there was no",
"print below shows the result. I disassembled the hotend, there was no leak",
"with the feature to prime after travel moves. I got the wall closed",
"moves. I got the wall closed just after 0.35 mm³. [![Prints using Copper",
"ABS in the past. Current Site Advice: Despite the weight, copper heat blocks",
"serious heat conducting issue with the old BQ hotend. [![Prints using BQ Alu",
"disassembled the hotend, there was no leak or whatsoever. Maybe it was too",
"replaced the cheap aluminum heat block with a copper alloy based one. After",
"no leak or whatsoever. Maybe it was too cold for printing. However, the",
"I still have severe underextrusion after travel moves (second piece, first picture, first",
"(left) and Copper alloy heatblock (right)\") Anyway, from there it became better. However,",
"feature to prime after travel moves. I got the wall closed just after",
"across several issues which seem to have been lowered. Firstly, I changed from",
"seem to have been lowered. Firstly, I changed from a 0.4 to a",
"0.35 mm³. [![Prints using Copper alloy Heatblock (left)](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy Heatblock",
"BQ hotend. [![Prints using BQ Alu Heatblock (left) and Copper alloy Heatblock (right)](https://i.stack.imgur.com/uxd43.jpg",
"Alu Heatblock (left) and Copper alloy heatblock (right)\") Anyway, from there it became",
"to prime after travel moves. I got the wall closed just after 0.35",
"Copper alloy Heatblock (left)](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy Heatblock (left)\")](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper",
"able to print my PETG (Colorfabb XT filament) below 270°C which caused unresolvable",
"did not discover such behavior with PLA or ABS in the past. Current",
"too cold for printing. However, the temperature displayed was 250°C. Then I replaced",
"the wall closed just after 0.35 mm³. [![Prints using Copper alloy Heatblock (left)](https://i.stack.imgur.com/Oj1Ey.jpg",
"after travel moves (second piece, first picture, first piece, second picture). I use",
"the old BQ hotend. [![Prints using BQ Alu Heatblock (left) and Copper alloy",
"PIDs did not work anymore. I had to greatly enhance the d-term, otherwise",
"temperature displayed was 250°C. Then I replaced the cheap aluminum heat block with",
"XT filament) below 270°C which caused unresolvable oozing. After that I was able",
"to greatly enhance the d-term, otherwise there was a big overshoot. Guess there",
"big overshoot. Guess there was a serious heat conducting issue with the old",
"[![Prints using Copper alloy Heatblock (left)](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy Heatblock (left)\")](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints",
"Copper alloy Heatblock (left)\")](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy Heatblock (left)\") My Question: Is",
"(left)\")](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy Heatblock (left)\") My Question: Is this underextrusion after",
"0.4 to a 0.5 mm nozzle. Because of the backpressure I was not",
"the feature to prime after travel moves. I got the wall closed just",
"using Copper alloy Heatblock (left)\")](https://i.stack.imgur.com/Oj1Ey.jpg \"Prints using Copper alloy Heatblock (left)\") My Question:",
"behavior with PLA or ABS in the past. Current Site Advice: Despite the",
"using BQ Alu Heatblock (left) and Copper alloy heatblock (right)\")](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ",
"with the old BQ hotend. [![Prints using BQ Alu Heatblock (left) and Copper",
"(left)\") My Question: Is this underextrusion after travel moves normal for PETG/XT? I",
"Heatblock (left) and Copper alloy heatblock (right)\")](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu Heatblock (left)",
"activated retraction with the feature to prime after travel moves. I got the"
] |
[
"which must be related with retraction and is generated on Z layer change:",
"\"Print layer effect\")](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\") The model itself, is printed in one",
"related with retraction and is generated on Z layer change: [![Print layer effect](https://i.stack.imgur.com/vasJH.jpg",
"in one layer perimeter / outline shell, with 0.25 mm layer height with",
"effect](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\")](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\") The model itself, is printed in",
"Bowden extruder in my printer setup. Everything works great except this effect which",
"I have a Bowden extruder in my printer setup. Everything works great except",
"outline shell, with 0.25 mm layer height with the following settings: [![Printer settings](https://i.stack.imgur.com/D66PI.png",
"[![Print layer effect](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\")](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\") The model itself, is",
"layer effect\")](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\") The model itself, is printed in one layer",
"and is generated on Z layer change: [![Print layer effect](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\")](https://i.stack.imgur.com/vasJH.jpg",
"\"Print layer effect\") The model itself, is printed in one layer perimeter /",
"layer perimeter / outline shell, with 0.25 mm layer height with the following",
"retraction and is generated on Z layer change: [![Print layer effect](https://i.stack.imgur.com/vasJH.jpg \"Print layer",
"shell, with 0.25 mm layer height with the following settings: [![Printer settings](https://i.stack.imgur.com/D66PI.png \"Printer",
"with 0.25 mm layer height with the following settings: [![Printer settings](https://i.stack.imgur.com/D66PI.png \"Printer settings\")](https://i.stack.imgur.com/D66PI.png",
"except this effect which must be related with retraction and is generated on",
"The model itself, is printed in one layer perimeter / outline shell, with",
"layer change: [![Print layer effect](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\")](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\") The model",
"with retraction and is generated on Z layer change: [![Print layer effect](https://i.stack.imgur.com/vasJH.jpg \"Print",
"on Z layer change: [![Print layer effect](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\")](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\")",
"be related with retraction and is generated on Z layer change: [![Print layer",
"this effect which must be related with retraction and is generated on Z",
"model itself, is printed in one layer perimeter / outline shell, with 0.25",
"change: [![Print layer effect](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\")](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\") The model itself,",
"extruder in my printer setup. Everything works great except this effect which must",
"great except this effect which must be related with retraction and is generated",
"must be related with retraction and is generated on Z layer change: [![Print",
"one layer perimeter / outline shell, with 0.25 mm layer height with the",
"layer effect\") The model itself, is printed in one layer perimeter / outline",
"is printed in one layer perimeter / outline shell, with 0.25 mm layer",
"/ outline shell, with 0.25 mm layer height with the following settings: [![Printer",
"perimeter / outline shell, with 0.25 mm layer height with the following settings:",
"have a Bowden extruder in my printer setup. Everything works great except this",
"layer effect](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\")](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\") The model itself, is printed",
"my printer setup. Everything works great except this effect which must be related",
"Everything works great except this effect which must be related with retraction and",
"Z layer change: [![Print layer effect](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\")](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\") The",
"effect\")](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\") The model itself, is printed in one layer perimeter",
"in my printer setup. Everything works great except this effect which must be",
"0.25 mm layer height with the following settings: [![Printer settings](https://i.stack.imgur.com/D66PI.png \"Printer settings\")](https://i.stack.imgur.com/D66PI.png \"Printer",
"mm layer height with the following settings: [![Printer settings](https://i.stack.imgur.com/D66PI.png \"Printer settings\")](https://i.stack.imgur.com/D66PI.png \"Printer settings\")",
"itself, is printed in one layer perimeter / outline shell, with 0.25 mm",
"setup. Everything works great except this effect which must be related with retraction",
"is generated on Z layer change: [![Print layer effect](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\")](https://i.stack.imgur.com/vasJH.jpg \"Print",
"generated on Z layer change: [![Print layer effect](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\")](https://i.stack.imgur.com/vasJH.jpg \"Print layer",
"works great except this effect which must be related with retraction and is",
"printed in one layer perimeter / outline shell, with 0.25 mm layer height",
"a Bowden extruder in my printer setup. Everything works great except this effect",
"printer setup. Everything works great except this effect which must be related with",
"effect\") The model itself, is printed in one layer perimeter / outline shell,",
"effect which must be related with retraction and is generated on Z layer"
] |
[
"\"Coasting\" was Enabled: * Coasting Volume 0.064 mm3 * Minimum Volume Before Coasting:",
"(circled in red), and how can I fix it? It is making my",
"is making my prints come out horrible. Not shown in the picture, but",
"prints come out horrible. Not shown in the picture, but the option \"Coasting\"",
"my prints come out horrible. Not shown in the picture, but the option",
"horrible. Not shown in the picture, but the option \"Coasting\" was Enabled: *",
"Not shown in the picture, but the option \"Coasting\" was Enabled: * Coasting",
"Enabled: * Coasting Volume 0.064 mm3 * Minimum Volume Before Coasting: 0.8 *",
"* Coasting Speed 90% --- [![Rendered G-code view of a sliced model](https://i.stack.imgur.com/a4sB6.jpg \"Rendered",
"0.064 mm3 * Minimum Volume Before Coasting: 0.8 * Coasting Speed 90% ---",
"in the picture, but the option \"Coasting\" was Enabled: * Coasting Volume 0.064",
"Minimum Volume Before Coasting: 0.8 * Coasting Speed 90% --- [![Rendered G-code view",
"does this happen (circled in red), and how can I fix it? It",
"happen (circled in red), and how can I fix it? It is making",
"the picture, but the option \"Coasting\" was Enabled: * Coasting Volume 0.064 mm3",
"Coasting: 0.8 * Coasting Speed 90% --- [![Rendered G-code view of a sliced",
"* Minimum Volume Before Coasting: 0.8 * Coasting Speed 90% --- [![Rendered G-code",
"a sliced model](https://i.stack.imgur.com/a4sB6.jpg \"Rendered G-code view of a sliced model\")](https://i.stack.imgur.com/a4sB6.jpg \"Rendered G-code view",
"shown in the picture, but the option \"Coasting\" was Enabled: * Coasting Volume",
"and how can I fix it? It is making my prints come out",
"0.8 * Coasting Speed 90% --- [![Rendered G-code view of a sliced model](https://i.stack.imgur.com/a4sB6.jpg",
"it? It is making my prints come out horrible. Not shown in the",
"option \"Coasting\" was Enabled: * Coasting Volume 0.064 mm3 * Minimum Volume Before",
"--- [![Rendered G-code view of a sliced model](https://i.stack.imgur.com/a4sB6.jpg \"Rendered G-code view of a",
"red), and how can I fix it? It is making my prints come",
"picture, but the option \"Coasting\" was Enabled: * Coasting Volume 0.064 mm3 *",
"come out horrible. Not shown in the picture, but the option \"Coasting\" was",
"Coasting Volume 0.064 mm3 * Minimum Volume Before Coasting: 0.8 * Coasting Speed",
"90% --- [![Rendered G-code view of a sliced model](https://i.stack.imgur.com/a4sB6.jpg \"Rendered G-code view of",
"but the option \"Coasting\" was Enabled: * Coasting Volume 0.064 mm3 * Minimum",
"fix it? It is making my prints come out horrible. Not shown in",
"* Coasting Volume 0.064 mm3 * Minimum Volume Before Coasting: 0.8 * Coasting",
"I fix it? It is making my prints come out horrible. Not shown",
"how can I fix it? It is making my prints come out horrible.",
"the option \"Coasting\" was Enabled: * Coasting Volume 0.064 mm3 * Minimum Volume",
"Speed 90% --- [![Rendered G-code view of a sliced model](https://i.stack.imgur.com/a4sB6.jpg \"Rendered G-code view",
"of a sliced model](https://i.stack.imgur.com/a4sB6.jpg \"Rendered G-code view of a sliced model\")](https://i.stack.imgur.com/a4sB6.jpg \"Rendered G-code",
"was Enabled: * Coasting Volume 0.064 mm3 * Minimum Volume Before Coasting: 0.8",
"G-code view of a sliced model\")](https://i.stack.imgur.com/a4sB6.jpg \"Rendered G-code view of a sliced model\")",
"Why does this happen (circled in red), and how can I fix it?",
"G-code view of a sliced model](https://i.stack.imgur.com/a4sB6.jpg \"Rendered G-code view of a sliced model\")](https://i.stack.imgur.com/a4sB6.jpg",
"Before Coasting: 0.8 * Coasting Speed 90% --- [![Rendered G-code view of a",
"mm3 * Minimum Volume Before Coasting: 0.8 * Coasting Speed 90% --- [![Rendered",
"Volume 0.064 mm3 * Minimum Volume Before Coasting: 0.8 * Coasting Speed 90%",
"model](https://i.stack.imgur.com/a4sB6.jpg \"Rendered G-code view of a sliced model\")](https://i.stack.imgur.com/a4sB6.jpg \"Rendered G-code view of a",
"Volume Before Coasting: 0.8 * Coasting Speed 90% --- [![Rendered G-code view of",
"sliced model](https://i.stack.imgur.com/a4sB6.jpg \"Rendered G-code view of a sliced model\")](https://i.stack.imgur.com/a4sB6.jpg \"Rendered G-code view of",
"this happen (circled in red), and how can I fix it? It is",
"Coasting Speed 90% --- [![Rendered G-code view of a sliced model](https://i.stack.imgur.com/a4sB6.jpg \"Rendered G-code",
"[![Rendered G-code view of a sliced model](https://i.stack.imgur.com/a4sB6.jpg \"Rendered G-code view of a sliced",
"view of a sliced model](https://i.stack.imgur.com/a4sB6.jpg \"Rendered G-code view of a sliced model\")](https://i.stack.imgur.com/a4sB6.jpg \"Rendered",
"making my prints come out horrible. Not shown in the picture, but the",
"\"Rendered G-code view of a sliced model\")](https://i.stack.imgur.com/a4sB6.jpg \"Rendered G-code view of a sliced",
"It is making my prints come out horrible. Not shown in the picture,",
"can I fix it? It is making my prints come out horrible. Not",
"in red), and how can I fix it? It is making my prints",
"out horrible. Not shown in the picture, but the option \"Coasting\" was Enabled:"
] |
[
"is Delta style Kossel clone and I have bad luck with Print In",
"hinges. I suspect that my printer just can't achieve low enough tolerances to",
"I suspect that my printer just can't achieve low enough tolerances to make",
"hinges work. Are there any tricks I can employ to get better prints",
"achieve low enough tolerances to make the hinges work. Are there any tricks",
"and I have bad luck with Print In Place (PIP) models, especially with",
"printer is Delta style Kossel clone and I have bad luck with Print",
"My first printer is Delta style Kossel clone and I have bad luck",
"just can't achieve low enough tolerances to make the hinges work. Are there",
"tolerances to make the hinges work. Are there any tricks I can employ",
"Print In Place (PIP) models, especially with hinges. I suspect that my printer",
"especially with hinges. I suspect that my printer just can't achieve low enough",
"my printer just can't achieve low enough tolerances to make the hinges work.",
"can't achieve low enough tolerances to make the hinges work. Are there any",
"models, especially with hinges. I suspect that my printer just can't achieve low",
"luck with Print In Place (PIP) models, especially with hinges. I suspect that",
"suspect that my printer just can't achieve low enough tolerances to make the",
"there any tricks I can employ to get better prints for PIP models?",
"work. Are there any tricks I can employ to get better prints for",
"I have bad luck with Print In Place (PIP) models, especially with hinges.",
"first printer is Delta style Kossel clone and I have bad luck with",
"to make the hinges work. Are there any tricks I can employ to",
"(PIP) models, especially with hinges. I suspect that my printer just can't achieve",
"make the hinges work. Are there any tricks I can employ to get",
"printer just can't achieve low enough tolerances to make the hinges work. Are",
"clone and I have bad luck with Print In Place (PIP) models, especially",
"style Kossel clone and I have bad luck with Print In Place (PIP)",
"In Place (PIP) models, especially with hinges. I suspect that my printer just",
"Delta style Kossel clone and I have bad luck with Print In Place",
"Kossel clone and I have bad luck with Print In Place (PIP) models,",
"low enough tolerances to make the hinges work. Are there any tricks I",
"that my printer just can't achieve low enough tolerances to make the hinges",
"with hinges. I suspect that my printer just can't achieve low enough tolerances",
"enough tolerances to make the hinges work. Are there any tricks I can",
"Place (PIP) models, especially with hinges. I suspect that my printer just can't",
"bad luck with Print In Place (PIP) models, especially with hinges. I suspect",
"have bad luck with Print In Place (PIP) models, especially with hinges. I",
"with Print In Place (PIP) models, especially with hinges. I suspect that my",
"the hinges work. Are there any tricks I can employ to get better",
"Are there any tricks I can employ to get better prints for PIP"
] |
[
"area a little larger than the part(s) being built would save in time",
"for what area is heated? I'm sure it would be an increase in",
"that being able to just heat an area a little larger than the",
"configurable for what area is heated? I'm sure it would be an increase",
"why beds aren't hardware/G-code configurable for what area is heated? I'm sure it",
"me wondering why beds aren't hardware/G-code configurable for what area is heated? I'm",
"and electronics, but it seems that being able to just heat an area",
"Waiting for a heatbed to get up to 85˚C for a relatively small",
"heatbed to get up to 85˚C for a relatively small part got me",
"it would be an increase in parts costs and electronics, but it seems",
"part got me wondering why beds aren't hardware/G-code configurable for what area is",
"what area is heated? I'm sure it would be an increase in parts",
"electronics, but it seems that being able to just heat an area a",
"for a relatively small part got me wondering why beds aren't hardware/G-code configurable",
"aren't hardware/G-code configurable for what area is heated? I'm sure it would be",
"relatively small part got me wondering why beds aren't hardware/G-code configurable for what",
"but it seems that being able to just heat an area a little",
"little larger than the part(s) being built would save in time and energy",
"would be an increase in parts costs and electronics, but it seems that",
"just heat an area a little larger than the part(s) being built would",
"sure it would be an increase in parts costs and electronics, but it",
"to 85˚C for a relatively small part got me wondering why beds aren't",
"costs and electronics, but it seems that being able to just heat an",
"to just heat an area a little larger than the part(s) being built",
"a little larger than the part(s) being built would save in time and",
"beds aren't hardware/G-code configurable for what area is heated? I'm sure it would",
"an area a little larger than the part(s) being built would save in",
"a relatively small part got me wondering why beds aren't hardware/G-code configurable for",
"is heated? I'm sure it would be an increase in parts costs and",
"small part got me wondering why beds aren't hardware/G-code configurable for what area",
"area is heated? I'm sure it would be an increase in parts costs",
"to get up to 85˚C for a relatively small part got me wondering",
"it seems that being able to just heat an area a little larger",
"hardware/G-code configurable for what area is heated? I'm sure it would be an",
"in parts costs and electronics, but it seems that being able to just",
"got me wondering why beds aren't hardware/G-code configurable for what area is heated?",
"be an increase in parts costs and electronics, but it seems that being",
"heat an area a little larger than the part(s) being built would save",
"up to 85˚C for a relatively small part got me wondering why beds",
"an increase in parts costs and electronics, but it seems that being able",
"parts costs and electronics, but it seems that being able to just heat",
"I'm sure it would be an increase in parts costs and electronics, but",
"increase in parts costs and electronics, but it seems that being able to",
"seems that being able to just heat an area a little larger than",
"wondering why beds aren't hardware/G-code configurable for what area is heated? I'm sure",
"for a heatbed to get up to 85˚C for a relatively small part",
"heated? I'm sure it would be an increase in parts costs and electronics,",
"being able to just heat an area a little larger than the part(s)",
"able to just heat an area a little larger than the part(s) being",
"a heatbed to get up to 85˚C for a relatively small part got",
"larger than the part(s) being built would save in time and energy use.",
"get up to 85˚C for a relatively small part got me wondering why",
"85˚C for a relatively small part got me wondering why beds aren't hardware/G-code"
] |
[
"point (which for me is more obvious) **Is there a way to instruct",
"the new layer and then lifts the nozzle. That caused my few printouts",
"lifts the nozzle. That caused my few printouts to fall as they collided",
"a way to instruct Cura to lift nozzle before it goes to the",
"it raises the nozzle in last printed point and then moves to a",
"printed point and then moves to a new layer starting point (which for",
"attention is that cura positions head in start point of the new layer",
"fall as they collided with the nozzle. Slic3r behavior is different: it raises",
"thing that I recently took my attention is that cura positions head in",
"obvious) **Is there a way to instruct Cura to lift nozzle before it",
"is more obvious) **Is there a way to instruct Cura to lift nozzle",
"and Slic3r and one important thing that I recently took my attention is",
"then lifts the nozzle. That caused my few printouts to fall as they",
"important thing that I recently took my attention is that cura positions head",
"printouts to fall as they collided with the nozzle. Slic3r behavior is different:",
"Slic3r behavior is different: it raises the nozzle in last printed point and",
"there a way to instruct Cura to lift nozzle before it goes to",
"and one important thing that I recently took my attention is that cura",
"am slicing with Cura and Slic3r and one important thing that I recently",
"my attention is that cura positions head in start point of the new",
"layer starting point (which for me is more obvious) **Is there a way",
"before it goes to the starting point of a new layer?** excluding Z-hops.",
"**Is there a way to instruct Cura to lift nozzle before it goes",
"then moves to a new layer starting point (which for me is more",
"collided with the nozzle. Slic3r behavior is different: it raises the nozzle in",
"last printed point and then moves to a new layer starting point (which",
"new layer starting point (which for me is more obvious) **Is there a",
"to instruct Cura to lift nozzle before it goes to the starting point",
"nozzle. That caused my few printouts to fall as they collided with the",
"different: it raises the nozzle in last printed point and then moves to",
"more obvious) **Is there a way to instruct Cura to lift nozzle before",
"recently took my attention is that cura positions head in start point of",
"positions head in start point of the new layer and then lifts the",
"nozzle in last printed point and then moves to a new layer starting",
"That caused my few printouts to fall as they collided with the nozzle.",
"one important thing that I recently took my attention is that cura positions",
"I recently took my attention is that cura positions head in start point",
"slicing with Cura and Slic3r and one important thing that I recently took",
"that cura positions head in start point of the new layer and then",
"for me is more obvious) **Is there a way to instruct Cura to",
"head in start point of the new layer and then lifts the nozzle.",
"way to instruct Cura to lift nozzle before it goes to the starting",
"to lift nozzle before it goes to the starting point of a new",
"start point of the new layer and then lifts the nozzle. That caused",
"nozzle. Slic3r behavior is different: it raises the nozzle in last printed point",
"instruct Cura to lift nozzle before it goes to the starting point of",
"behavior is different: it raises the nozzle in last printed point and then",
"starting point (which for me is more obvious) **Is there a way to",
"they collided with the nozzle. Slic3r behavior is different: it raises the nozzle",
"in last printed point and then moves to a new layer starting point",
"is different: it raises the nozzle in last printed point and then moves",
"the nozzle in last printed point and then moves to a new layer",
"the nozzle. Slic3r behavior is different: it raises the nozzle in last printed",
"layer and then lifts the nozzle. That caused my few printouts to fall",
"a new layer starting point (which for me is more obvious) **Is there",
"lift nozzle before it goes to the starting point of a new layer?**",
"few printouts to fall as they collided with the nozzle. Slic3r behavior is",
"Cura and Slic3r and one important thing that I recently took my attention",
"to fall as they collided with the nozzle. Slic3r behavior is different: it",
"cura positions head in start point of the new layer and then lifts",
"took my attention is that cura positions head in start point of the",
"Cura to lift nozzle before it goes to the starting point of a",
"moves to a new layer starting point (which for me is more obvious)",
"with Cura and Slic3r and one important thing that I recently took my",
"of the new layer and then lifts the nozzle. That caused my few",
"me is more obvious) **Is there a way to instruct Cura to lift",
"to a new layer starting point (which for me is more obvious) **Is",
"with the nozzle. Slic3r behavior is different: it raises the nozzle in last",
"nozzle before it goes to the starting point of a new layer?** excluding",
"my few printouts to fall as they collided with the nozzle. Slic3r behavior",
"point of the new layer and then lifts the nozzle. That caused my",
"(which for me is more obvious) **Is there a way to instruct Cura",
"and then lifts the nozzle. That caused my few printouts to fall as",
"caused my few printouts to fall as they collided with the nozzle. Slic3r",
"raises the nozzle in last printed point and then moves to a new",
"as they collided with the nozzle. Slic3r behavior is different: it raises the",
"the nozzle. That caused my few printouts to fall as they collided with",
"I am slicing with Cura and Slic3r and one important thing that I",
"in start point of the new layer and then lifts the nozzle. That",
"that I recently took my attention is that cura positions head in start",
"Slic3r and one important thing that I recently took my attention is that",
"and then moves to a new layer starting point (which for me is",
"point and then moves to a new layer starting point (which for me",
"is that cura positions head in start point of the new layer and",
"new layer and then lifts the nozzle. That caused my few printouts to"
] |
[
"This collection of answers will be useful to evangelize making to a whole",
"on Thingiverse or in Fusion (more like a quarter)! I'm not a parent",
"box. --- 1: the (girls) are not interested in my normal kids' goto,",
"NOT an opinion-gathering post, though there may be more than one \"correct\" answer.",
"collection of answers will be useful to evangelize making to a whole new",
"quarter)! I'm not a parent and my youngest friend is probably in their",
"an item of their choice like a dogboned box or a two-piece sword",
"fast) * Prusa mk3 * cheapo 80W 500x300 mm laser * Fusion 360",
"a full bed 1200x1800 mm CNC (preferred, because it's loud and fast) *",
"1200x1800 mm CNC (preferred, because it's loud and fast) * Prusa mk3 *",
"Arduinos and stuff Ideas we've had: a minecraft creeper, done as a simple-ish",
"and fast) * Prusa mk3 * cheapo 80W 500x300 mm laser * Fusion",
"two-piece sword and hilt, or a name tag, or whatever. I need a",
"for a young audience. This collection of answers will be useful to evangelize",
"in: minecraft, dragons, horses. \\_o\\_/ edit: this is NOT an opinion-gathering post, though",
"Ideas we've had: a minecraft creeper, done as a simple-ish box. --- 1:",
"360 based workflow, easy :) * Arduinos and stuff Ideas we've had: a",
"I'm not a parent and my youngest friend is probably in their twenties.",
"box or a two-piece sword and hilt, or a name tag, or whatever.",
"about 3D-printing and CNC cutting and makering in general. We have a weekly",
"a name tag, or whatever. I need a few ideas prepared so we",
"where people can design and print/CNC/laser an item of their choice like a",
"500x300 mm laser * Fusion 360 based workflow, easy :) * Arduinos and",
"it's loud and fast) * Prusa mk3 * cheapo 80W 500x300 mm laser",
"or a name tag, or whatever. I need a few ideas prepared so",
"a few ideas prepared so we don't spend half our lesson on Thingiverse",
"(more like a quarter)! I'm not a parent and my youngest friend is",
"twenties. What we have: * a full bed 1200x1800 mm CNC (preferred, because",
"* Prusa mk3 * cheapo 80W 500x300 mm laser * Fusion 360 based",
"normal kids' goto, which is: swords, shields. They are interested in: minecraft, dragons,",
"applications of 3d printing for a young audience. This collection of answers will",
"8- and 11- year old kids1 excited about 3D-printing and CNC cutting and",
"done as a simple-ish box. --- 1: the (girls) are not interested in",
"a quarter)! I'm not a parent and my youngest friend is probably in",
"CNC (preferred, because it's loud and fast) * Prusa mk3 * cheapo 80W",
"They are interested in: minecraft, dragons, horses. \\_o\\_/ edit: this is NOT an",
"excited about 3D-printing and CNC cutting and makering in general. We have a",
"their choice like a dogboned box or a two-piece sword and hilt, or",
"1: the (girls) are not interested in my normal kids' goto, which is:",
"in my normal kids' goto, which is: swords, shields. They are interested in:",
"to get their 8- and 11- year old kids1 excited about 3D-printing and",
"We have a weekly open training where people can design and print/CNC/laser an",
"their 8- and 11- year old kids1 excited about 3D-printing and CNC cutting",
"or whatever. I need a few ideas prepared so we don't spend half",
"we have: * a full bed 1200x1800 mm CNC (preferred, because it's loud",
"because it's loud and fast) * Prusa mk3 * cheapo 80W 500x300 mm",
"need specific applications of 3d printing for a young audience. This collection of",
"spend half our lesson on Thingiverse or in Fusion (more like a quarter)!",
"as a simple-ish box. --- 1: the (girls) are not interested in my",
"or a two-piece sword and hilt, or a name tag, or whatever. I",
"have a weekly open training where people can design and print/CNC/laser an item",
"I need a few ideas prepared so we don't spend half our lesson",
"(girls) are not interested in my normal kids' goto, which is: swords, shields.",
"and print/CNC/laser an item of their choice like a dogboned box or a",
"our lesson on Thingiverse or in Fusion (more like a quarter)! I'm not",
"easy :) * Arduinos and stuff Ideas we've had: a minecraft creeper, done",
"edit: this is NOT an opinion-gathering post, though there may be more than",
"may be more than one \"correct\" answer. We need specific applications of 3d",
"than one \"correct\" answer. We need specific applications of 3d printing for a",
"CNC cutting and makering in general. We have a weekly open training where",
"name tag, or whatever. I need a few ideas prepared so we don't",
"A member of our hackspace wants to get their 8- and 11- year",
"is NOT an opinion-gathering post, though there may be more than one \"correct\"",
"so we don't spend half our lesson on Thingiverse or in Fusion (more",
"of 3d printing for a young audience. This collection of answers will be",
"in Fusion (more like a quarter)! I'm not a parent and my youngest",
"* Arduinos and stuff Ideas we've had: a minecraft creeper, done as a",
"Fusion (more like a quarter)! I'm not a parent and my youngest friend",
"our hackspace wants to get their 8- and 11- year old kids1 excited",
"goto, which is: swords, shields. They are interested in: minecraft, dragons, horses. \\_o\\_/",
"don't spend half our lesson on Thingiverse or in Fusion (more like a",
"sword and hilt, or a name tag, or whatever. I need a few",
"mk3 * cheapo 80W 500x300 mm laser * Fusion 360 based workflow, easy",
"year old kids1 excited about 3D-printing and CNC cutting and makering in general.",
"there may be more than one \"correct\" answer. We need specific applications of",
"a dogboned box or a two-piece sword and hilt, or a name tag,",
"is: swords, shields. They are interested in: minecraft, dragons, horses. \\_o\\_/ edit: this",
"of answers will be useful to evangelize making to a whole new generation!",
"kids' goto, which is: swords, shields. They are interested in: minecraft, dragons, horses.",
"more than one \"correct\" answer. We need specific applications of 3d printing for",
"interested in: minecraft, dragons, horses. \\_o\\_/ edit: this is NOT an opinion-gathering post,",
"one \"correct\" answer. We need specific applications of 3d printing for a young",
"their twenties. What we have: * a full bed 1200x1800 mm CNC (preferred,",
"have: * a full bed 1200x1800 mm CNC (preferred, because it's loud and",
"dragons, horses. \\_o\\_/ edit: this is NOT an opinion-gathering post, though there may",
"wants to get their 8- and 11- year old kids1 excited about 3D-printing",
"tag, or whatever. I need a few ideas prepared so we don't spend",
"We need specific applications of 3d printing for a young audience. This collection",
"old kids1 excited about 3D-printing and CNC cutting and makering in general. We",
"choice like a dogboned box or a two-piece sword and hilt, or a",
"friend is probably in their twenties. What we have: * a full bed",
"and hilt, or a name tag, or whatever. I need a few ideas",
"is probably in their twenties. What we have: * a full bed 1200x1800",
"interested in my normal kids' goto, which is: swords, shields. They are interested",
"shields. They are interested in: minecraft, dragons, horses. \\_o\\_/ edit: this is NOT",
"full bed 1200x1800 mm CNC (preferred, because it's loud and fast) * Prusa",
"of our hackspace wants to get their 8- and 11- year old kids1",
"whatever. I need a few ideas prepared so we don't spend half our",
"answer. We need specific applications of 3d printing for a young audience. This",
"the (girls) are not interested in my normal kids' goto, which is: swords,",
"though there may be more than one \"correct\" answer. We need specific applications",
"Fusion 360 based workflow, easy :) * Arduinos and stuff Ideas we've had:",
"not a parent and my youngest friend is probably in their twenties. What",
"a parent and my youngest friend is probably in their twenties. What we",
"not interested in my normal kids' goto, which is: swords, shields. They are",
"young audience. This collection of answers will be useful to evangelize making to",
"and CNC cutting and makering in general. We have a weekly open training",
"simple-ish box. --- 1: the (girls) are not interested in my normal kids'",
"mm laser * Fusion 360 based workflow, easy :) * Arduinos and stuff",
"had: a minecraft creeper, done as a simple-ish box. --- 1: the (girls)",
"this is NOT an opinion-gathering post, though there may be more than one",
"can design and print/CNC/laser an item of their choice like a dogboned box",
":) * Arduinos and stuff Ideas we've had: a minecraft creeper, done as",
"design and print/CNC/laser an item of their choice like a dogboned box or",
"Prusa mk3 * cheapo 80W 500x300 mm laser * Fusion 360 based workflow,",
"minecraft creeper, done as a simple-ish box. --- 1: the (girls) are not",
"creeper, done as a simple-ish box. --- 1: the (girls) are not interested",
"What we have: * a full bed 1200x1800 mm CNC (preferred, because it's",
"mm CNC (preferred, because it's loud and fast) * Prusa mk3 * cheapo",
"workflow, easy :) * Arduinos and stuff Ideas we've had: a minecraft creeper,",
"and stuff Ideas we've had: a minecraft creeper, done as a simple-ish box.",
"horses. \\_o\\_/ edit: this is NOT an opinion-gathering post, though there may be",
"in their twenties. What we have: * a full bed 1200x1800 mm CNC",
"we've had: a minecraft creeper, done as a simple-ish box. --- 1: the",
"audience. This collection of answers will be useful to evangelize making to a",
"are not interested in my normal kids' goto, which is: swords, shields. They",
"an opinion-gathering post, though there may be more than one \"correct\" answer. We",
"print/CNC/laser an item of their choice like a dogboned box or a two-piece",
"a two-piece sword and hilt, or a name tag, or whatever. I need",
"open training where people can design and print/CNC/laser an item of their choice",
"stuff Ideas we've had: a minecraft creeper, done as a simple-ish box. ---",
"a weekly open training where people can design and print/CNC/laser an item of",
"* a full bed 1200x1800 mm CNC (preferred, because it's loud and fast)",
"weekly open training where people can design and print/CNC/laser an item of their",
"loud and fast) * Prusa mk3 * cheapo 80W 500x300 mm laser *",
"like a dogboned box or a two-piece sword and hilt, or a name",
"--- 1: the (girls) are not interested in my normal kids' goto, which",
"cheapo 80W 500x300 mm laser * Fusion 360 based workflow, easy :) *",
"opinion-gathering post, though there may be more than one \"correct\" answer. We need",
"Thingiverse or in Fusion (more like a quarter)! I'm not a parent and",
"based workflow, easy :) * Arduinos and stuff Ideas we've had: a minecraft",
"(preferred, because it's loud and fast) * Prusa mk3 * cheapo 80W 500x300",
"we don't spend half our lesson on Thingiverse or in Fusion (more like",
"3D-printing and CNC cutting and makering in general. We have a weekly open",
"\\_o\\_/ edit: this is NOT an opinion-gathering post, though there may be more",
"makering in general. We have a weekly open training where people can design",
"need a few ideas prepared so we don't spend half our lesson on",
"* cheapo 80W 500x300 mm laser * Fusion 360 based workflow, easy :)",
"are interested in: minecraft, dragons, horses. \\_o\\_/ edit: this is NOT an opinion-gathering",
"ideas prepared so we don't spend half our lesson on Thingiverse or in",
"11- year old kids1 excited about 3D-printing and CNC cutting and makering in",
"like a quarter)! I'm not a parent and my youngest friend is probably",
"a simple-ish box. --- 1: the (girls) are not interested in my normal",
"which is: swords, shields. They are interested in: minecraft, dragons, horses. \\_o\\_/ edit:",
"parent and my youngest friend is probably in their twenties. What we have:",
"of their choice like a dogboned box or a two-piece sword and hilt,",
"\"correct\" answer. We need specific applications of 3d printing for a young audience.",
"probably in their twenties. What we have: * a full bed 1200x1800 mm",
"general. We have a weekly open training where people can design and print/CNC/laser",
"a young audience. This collection of answers will be useful to evangelize making",
"and makering in general. We have a weekly open training where people can",
"cutting and makering in general. We have a weekly open training where people",
"hilt, or a name tag, or whatever. I need a few ideas prepared",
"specific applications of 3d printing for a young audience. This collection of answers",
"youngest friend is probably in their twenties. What we have: * a full",
"or in Fusion (more like a quarter)! I'm not a parent and my",
"printing for a young audience. This collection of answers will be useful to",
"3d printing for a young audience. This collection of answers will be useful",
"* Fusion 360 based workflow, easy :) * Arduinos and stuff Ideas we've",
"post, though there may be more than one \"correct\" answer. We need specific",
"kids1 excited about 3D-printing and CNC cutting and makering in general. We have",
"and 11- year old kids1 excited about 3D-printing and CNC cutting and makering",
"my youngest friend is probably in their twenties. What we have: * a",
"get their 8- and 11- year old kids1 excited about 3D-printing and CNC",
"laser * Fusion 360 based workflow, easy :) * Arduinos and stuff Ideas",
"member of our hackspace wants to get their 8- and 11- year old",
"few ideas prepared so we don't spend half our lesson on Thingiverse or",
"bed 1200x1800 mm CNC (preferred, because it's loud and fast) * Prusa mk3",
"80W 500x300 mm laser * Fusion 360 based workflow, easy :) * Arduinos",
"hackspace wants to get their 8- and 11- year old kids1 excited about",
"be more than one \"correct\" answer. We need specific applications of 3d printing",
"training where people can design and print/CNC/laser an item of their choice like",
"lesson on Thingiverse or in Fusion (more like a quarter)! I'm not a",
"in general. We have a weekly open training where people can design and",
"people can design and print/CNC/laser an item of their choice like a dogboned",
"prepared so we don't spend half our lesson on Thingiverse or in Fusion",
"half our lesson on Thingiverse or in Fusion (more like a quarter)! I'm",
"a minecraft creeper, done as a simple-ish box. --- 1: the (girls) are",
"swords, shields. They are interested in: minecraft, dragons, horses. \\_o\\_/ edit: this is",
"item of their choice like a dogboned box or a two-piece sword and",
"and my youngest friend is probably in their twenties. What we have: *",
"my normal kids' goto, which is: swords, shields. They are interested in: minecraft,",
"minecraft, dragons, horses. \\_o\\_/ edit: this is NOT an opinion-gathering post, though there",
"dogboned box or a two-piece sword and hilt, or a name tag, or"
] |
[
"know about some issues with the clamps, if I get myself an Ender-3,",
"replace the hotend with a proper one from day one. So knowing its",
"about some reviews. Some claim it is running 24 V, one did claim",
"the clamps, if I get myself an Ender-3, I want to replace the",
"clamps, if I get myself an Ender-3, I want to replace the hotend",
"want to replace the hotend with a proper one from day one. So",
"confused about some reviews. Some claim it is running 24 V, one did",
"reviews. Some claim it is running 24 V, one did claim it was",
"claim it was 12 V, most don't mention it. Since I know about",
"day one. So knowing its voltage is needed to order the right parts.",
"don't mention it. Since I know about some issues with the clamps, if",
"24 V, one did claim it was 12 V, most don't mention it.",
"I get myself an Ender-3, I want to replace the hotend with a",
"Ender-3, I want to replace the hotend with a proper one from day",
"if I get myself an Ender-3, I want to replace the hotend with",
"and I am honestly confused about some reviews. Some claim it is running",
"it was 12 V, most don't mention it. Since I know about some",
"V, most don't mention it. Since I know about some issues with the",
"one from day one. So knowing its voltage is needed to order the",
"hotend with a proper one from day one. So knowing its voltage is",
"buying a Creality Ender-3, and I am honestly confused about some reviews. Some",
"I am honestly confused about some reviews. Some claim it is running 24",
"it. Since I know about some issues with the clamps, if I get",
"most don't mention it. Since I know about some issues with the clamps,",
"it is running 24 V, one did claim it was 12 V, most",
"some issues with the clamps, if I get myself an Ender-3, I want",
"I know about some issues with the clamps, if I get myself an",
"one did claim it was 12 V, most don't mention it. Since I",
"pondering about buying a Creality Ender-3, and I am honestly confused about some",
"get myself an Ender-3, I want to replace the hotend with a proper",
"V, one did claim it was 12 V, most don't mention it. Since",
"with a proper one from day one. So knowing its voltage is needed",
"some reviews. Some claim it is running 24 V, one did claim it",
"the hotend with a proper one from day one. So knowing its voltage",
"about buying a Creality Ender-3, and I am honestly confused about some reviews.",
"Creality Ender-3, and I am honestly confused about some reviews. Some claim it",
"honestly confused about some reviews. Some claim it is running 24 V, one",
"claim it is running 24 V, one did claim it was 12 V,",
"from day one. So knowing its voltage is needed to order the right",
"12 V, most don't mention it. Since I know about some issues with",
"Ender-3, and I am honestly confused about some reviews. Some claim it is",
"am pondering about buying a Creality Ender-3, and I am honestly confused about",
"is running 24 V, one did claim it was 12 V, most don't",
"Since I know about some issues with the clamps, if I get myself",
"myself an Ender-3, I want to replace the hotend with a proper one",
"with the clamps, if I get myself an Ender-3, I want to replace",
"issues with the clamps, if I get myself an Ender-3, I want to",
"Some claim it is running 24 V, one did claim it was 12",
"a Creality Ender-3, and I am honestly confused about some reviews. Some claim",
"an Ender-3, I want to replace the hotend with a proper one from",
"proper one from day one. So knowing its voltage is needed to order",
"was 12 V, most don't mention it. Since I know about some issues",
"to replace the hotend with a proper one from day one. So knowing",
"about some issues with the clamps, if I get myself an Ender-3, I",
"I want to replace the hotend with a proper one from day one.",
"mention it. Since I know about some issues with the clamps, if I",
"I am pondering about buying a Creality Ender-3, and I am honestly confused",
"did claim it was 12 V, most don't mention it. Since I know",
"a proper one from day one. So knowing its voltage is needed to",
"am honestly confused about some reviews. Some claim it is running 24 V,",
"running 24 V, one did claim it was 12 V, most don't mention"
] |
[
"reset extrusion distance ``` The [RepRap Wiki](https://reprap.org/wiki/Start_GCode_routines) suggests that there could be made",
"love to *swipe* the nozzle before starting to print, making sure that the",
"of feed stock G92 E0 ; reset extrusion distance ``` The [RepRap Wiki](https://reprap.org/wiki/Start_GCode_routines)",
"; reset extrusion distance ``` The [RepRap Wiki](https://reprap.org/wiki/Start_GCode_routines) suggests that there could be",
"ordered myself an Ender-3, a genuine 24V e3D hotend, inductive sensor and some",
"line has occasionally. But now I need to fix up my Cura for",
"the CR10, and fixing the dimensions is easy. But now comes the tricky",
"from this. I would love to *swipe* the nozzle before starting to print,",
"never bothered with changing it away from the \"basic\" settings that a \"custom",
"I need to fix up my Cura for the machine coming in. The",
"distance ``` The [RepRap Wiki](https://reprap.org/wiki/Start_GCode_routines) suggests that there could be made so much",
"; reset extrusion distance G1 F200 E3 ; extrude 3mm of feed stock",
"G1 Z15.0 F6000 ;Move the Gantry up 15mm going fast ;Prime the extruder",
"I want to know what I type in there. The basic code, after",
"the curled up filament from this first extrusion doesn't get squished against the",
"inductive sensor and some better tubing/clamps to cope with the problem the CR10/Ender",
"the problem the CR10/Ender line has occasionally. But now I need to fix",
"changing it away from the \"basic\" settings that a \"custom 3D printer\" on",
"get squished against the nozzle and make a bad first layer. **How does",
"with the problem the CR10/Ender line has occasionally. But now I need to",
"after I dragged out the G-code handbook from the RepRap wiki to add",
"to know what I type in there. The basic code, after I dragged",
"tricky part: Start and End G-code. For my TronXY I never bothered with",
"made so much more from this. I would love to *swipe* the nozzle",
"better tubing/clamps to cope with the problem the CR10/Ender line has occasionally. But",
"bothered with changing it away from the \"basic\" settings that a \"custom 3D",
"this time I want to know what I type in there. The basic",
"there could be made so much more from this. I would love to",
"``` G28 ;Home G1 Z15.0 F6000 ;Move the Gantry up 15mm going fast",
"a bad first layer. **How does an example (commented) G-code for swiping the",
"G-code. For my TronXY I never bothered with changing it away from the",
"now I need to fix up my Cura for the machine coming in.",
"CR10, and fixing the dimensions is easy. But now comes the tricky part:",
"and End G-code. For my TronXY I never bothered with changing it away",
"print, making sure that the curled up filament from this first extrusion doesn't",
"on Marlin gave, but this time I want to know what I type",
"in. The start is the CR10, and fixing the dimensions is easy. But",
"the tricky part: Start and End G-code. For my TronXY I never bothered",
"G92 E0 ; reset extrusion distance ``` The [RepRap Wiki](https://reprap.org/wiki/Start_GCode_routines) suggests that there",
"CR10/Ender line has occasionally. But now I need to fix up my Cura",
"F6000 ;Move the Gantry up 15mm going fast ;Prime the extruder G92 E0",
"up 15mm going fast ;Prime the extruder G92 E0 ; reset extrusion distance",
"would love to *swipe* the nozzle before starting to print, making sure that",
"E0 ; reset extrusion distance ``` The [RepRap Wiki](https://reprap.org/wiki/Start_GCode_routines) suggests that there could",
"I did it, I ordered myself an Ender-3, a genuine 24V e3D hotend,",
"my TronXY I never bothered with changing it away from the \"basic\" settings",
"to cope with the problem the CR10/Ender line has occasionally. But now I",
"Z15.0 F6000 ;Move the Gantry up 15mm going fast ;Prime the extruder G92",
"making sure that the curled up filament from this first extrusion doesn't get",
"did it, I ordered myself an Ender-3, a genuine 24V e3D hotend, inductive",
"out the G-code handbook from the RepRap wiki to add the missing comments",
"I never bothered with changing it away from the \"basic\" settings that a",
"I ordered myself an Ender-3, a genuine 24V e3D hotend, inductive sensor and",
"the extruder G92 E0 ; reset extrusion distance G1 F200 E3 ; extrude",
"time I want to know what I type in there. The basic code,",
"the G-code handbook from the RepRap wiki to add the missing comments is:",
"the RepRap wiki to add the missing comments is: ``` G28 ;Home G1",
"feed stock G92 E0 ; reset extrusion distance ``` The [RepRap Wiki](https://reprap.org/wiki/Start_GCode_routines) suggests",
"the machine coming in. The start is the CR10, and fixing the dimensions",
"up filament from this first extrusion doesn't get squished against the nozzle and",
"distance G1 F200 E3 ; extrude 3mm of feed stock G92 E0 ;",
"to fix up my Cura for the machine coming in. The start is",
"bad first layer. **How does an example (commented) G-code for swiping the nozzle",
"gave, but this time I want to know what I type in there.",
"add the missing comments is: ``` G28 ;Home G1 Z15.0 F6000 ;Move the",
"I type in there. The basic code, after I dragged out the G-code",
"fixing the dimensions is easy. But now comes the tricky part: Start and",
"extrusion distance G1 F200 E3 ; extrude 3mm of feed stock G92 E0",
"so much more from this. I would love to *swipe* the nozzle before",
"TronXY I never bothered with changing it away from the \"basic\" settings that",
"extruder G92 E0 ; reset extrusion distance G1 F200 E3 ; extrude 3mm",
"this first extrusion doesn't get squished against the nozzle and make a bad",
"sensor and some better tubing/clamps to cope with the problem the CR10/Ender line",
"fix up my Cura for the machine coming in. The start is the",
"what I type in there. The basic code, after I dragged out the",
"Start and End G-code. For my TronXY I never bothered with changing it",
"missing comments is: ``` G28 ;Home G1 Z15.0 F6000 ;Move the Gantry up",
"this. I would love to *swipe* the nozzle before starting to print, making",
"extrusion distance ``` The [RepRap Wiki](https://reprap.org/wiki/Start_GCode_routines) suggests that there could be made so",
"G92 E0 ; reset extrusion distance G1 F200 E3 ; extrude 3mm of",
"and fixing the dimensions is easy. But now comes the tricky part: Start",
"\"custom 3D printer\" on Marlin gave, but this time I want to know",
"know what I type in there. The basic code, after I dragged out",
"has occasionally. But now I need to fix up my Cura for the",
"dragged out the G-code handbook from the RepRap wiki to add the missing",
"easy. But now comes the tricky part: Start and End G-code. For my",
"occasionally. But now I need to fix up my Cura for the machine",
"machine coming in. The start is the CR10, and fixing the dimensions is",
"the missing comments is: ``` G28 ;Home G1 Z15.0 F6000 ;Move the Gantry",
"stock G92 E0 ; reset extrusion distance ``` The [RepRap Wiki](https://reprap.org/wiki/Start_GCode_routines) suggests that",
"E3 ; extrude 3mm of feed stock G92 E0 ; reset extrusion distance",
"Ender-3, a genuine 24V e3D hotend, inductive sensor and some better tubing/clamps to",
"handbook from the RepRap wiki to add the missing comments is: ``` G28",
"is the CR10, and fixing the dimensions is easy. But now comes the",
"printer\" on Marlin gave, but this time I want to know what I",
"But now I need to fix up my Cura for the machine coming",
"Cura for the machine coming in. The start is the CR10, and fixing",
"dimensions is easy. But now comes the tricky part: Start and End G-code.",
"But now comes the tricky part: Start and End G-code. For my TronXY",
"*swipe* the nozzle before starting to print, making sure that the curled up",
"hotend, inductive sensor and some better tubing/clamps to cope with the problem the",
"away from the \"basic\" settings that a \"custom 3D printer\" on Marlin gave,",
"E0 ; reset extrusion distance G1 F200 E3 ; extrude 3mm of feed",
"from this first extrusion doesn't get squished against the nozzle and make a",
"The start is the CR10, and fixing the dimensions is easy. But now",
"[RepRap Wiki](https://reprap.org/wiki/Start_GCode_routines) suggests that there could be made so much more from this.",
"The [RepRap Wiki](https://reprap.org/wiki/Start_GCode_routines) suggests that there could be made so much more from",
"End G-code. For my TronXY I never bothered with changing it away from",
"with changing it away from the \"basic\" settings that a \"custom 3D printer\"",
"there. The basic code, after I dragged out the G-code handbook from the",
";Move the Gantry up 15mm going fast ;Prime the extruder G92 E0 ;",
"G28 ;Home G1 Z15.0 F6000 ;Move the Gantry up 15mm going fast ;Prime",
"that there could be made so much more from this. I would love",
"e3D hotend, inductive sensor and some better tubing/clamps to cope with the problem",
"is: ``` G28 ;Home G1 Z15.0 F6000 ;Move the Gantry up 15mm going",
"now comes the tricky part: Start and End G-code. For my TronXY I",
"for the machine coming in. The start is the CR10, and fixing the",
"Gantry up 15mm going fast ;Prime the extruder G92 E0 ; reset extrusion",
"much more from this. I would love to *swipe* the nozzle before starting",
"need to fix up my Cura for the machine coming in. The start",
"genuine 24V e3D hotend, inductive sensor and some better tubing/clamps to cope with",
"but this time I want to know what I type in there. The",
"code, after I dragged out the G-code handbook from the RepRap wiki to",
"nozzle before starting to print, making sure that the curled up filament from",
"starting to print, making sure that the curled up filament from this first",
"the nozzle before starting to print, making sure that the curled up filament",
"from the RepRap wiki to add the missing comments is: ``` G28 ;Home",
"squished against the nozzle and make a bad first layer. **How does an",
"an Ender-3, a genuine 24V e3D hotend, inductive sensor and some better tubing/clamps",
"fast ;Prime the extruder G92 E0 ; reset extrusion distance G1 F200 E3",
"doesn't get squished against the nozzle and make a bad first layer. **How",
"first layer. **How does an example (commented) G-code for swiping the nozzle look",
"F200 E3 ; extrude 3mm of feed stock G92 E0 ; reset extrusion",
"problem the CR10/Ender line has occasionally. But now I need to fix up",
"settings that a \"custom 3D printer\" on Marlin gave, but this time I",
"nozzle and make a bad first layer. **How does an example (commented) G-code",
"the Gantry up 15mm going fast ;Prime the extruder G92 E0 ; reset",
"G1 F200 E3 ; extrude 3mm of feed stock G92 E0 ; reset",
"G-code handbook from the RepRap wiki to add the missing comments is: ```",
"and some better tubing/clamps to cope with the problem the CR10/Ender line has",
"against the nozzle and make a bad first layer. **How does an example",
"a genuine 24V e3D hotend, inductive sensor and some better tubing/clamps to cope",
"before starting to print, making sure that the curled up filament from this",
"that a \"custom 3D printer\" on Marlin gave, but this time I want",
"want to know what I type in there. The basic code, after I",
"reset extrusion distance G1 F200 E3 ; extrude 3mm of feed stock G92",
"filament from this first extrusion doesn't get squished against the nozzle and make",
"and make a bad first layer. **How does an example (commented) G-code for",
"sure that the curled up filament from this first extrusion doesn't get squished",
"cope with the problem the CR10/Ender line has occasionally. But now I need",
"; extrude 3mm of feed stock G92 E0 ; reset extrusion distance ```",
"it away from the \"basic\" settings that a \"custom 3D printer\" on Marlin",
"up my Cura for the machine coming in. The start is the CR10,",
"Marlin gave, but this time I want to know what I type in",
"type in there. The basic code, after I dragged out the G-code handbook",
"a \"custom 3D printer\" on Marlin gave, but this time I want to",
"3mm of feed stock G92 E0 ; reset extrusion distance ``` The [RepRap",
"the \"basic\" settings that a \"custom 3D printer\" on Marlin gave, but this",
"be made so much more from this. I would love to *swipe* the",
"Wiki](https://reprap.org/wiki/Start_GCode_routines) suggests that there could be made so much more from this. I",
"some better tubing/clamps to cope with the problem the CR10/Ender line has occasionally.",
"first extrusion doesn't get squished against the nozzle and make a bad first",
"extrude 3mm of feed stock G92 E0 ; reset extrusion distance ``` The",
"the CR10/Ender line has occasionally. But now I need to fix up my",
"For my TronXY I never bothered with changing it away from the \"basic\"",
"wiki to add the missing comments is: ``` G28 ;Home G1 Z15.0 F6000",
"3D printer\" on Marlin gave, but this time I want to know what",
"coming in. The start is the CR10, and fixing the dimensions is easy.",
"comments is: ``` G28 ;Home G1 Z15.0 F6000 ;Move the Gantry up 15mm",
"layer. **How does an example (commented) G-code for swiping the nozzle look like?**",
";Home G1 Z15.0 F6000 ;Move the Gantry up 15mm going fast ;Prime the",
"is easy. But now comes the tricky part: Start and End G-code. For",
"RepRap wiki to add the missing comments is: ``` G28 ;Home G1 Z15.0",
"part: Start and End G-code. For my TronXY I never bothered with changing",
"suggests that there could be made so much more from this. I would",
"in there. The basic code, after I dragged out the G-code handbook from",
"that the curled up filament from this first extrusion doesn't get squished against",
"going fast ;Prime the extruder G92 E0 ; reset extrusion distance G1 F200",
"extrusion doesn't get squished against the nozzle and make a bad first layer.",
"Ok, I did it, I ordered myself an Ender-3, a genuine 24V e3D",
"comes the tricky part: Start and End G-code. For my TronXY I never",
"I dragged out the G-code handbook from the RepRap wiki to add the",
"my Cura for the machine coming in. The start is the CR10, and",
";Prime the extruder G92 E0 ; reset extrusion distance G1 F200 E3 ;",
"24V e3D hotend, inductive sensor and some better tubing/clamps to cope with the",
"start is the CR10, and fixing the dimensions is easy. But now comes",
"the dimensions is easy. But now comes the tricky part: Start and End",
"The basic code, after I dragged out the G-code handbook from the RepRap",
"to print, making sure that the curled up filament from this first extrusion",
"to *swipe* the nozzle before starting to print, making sure that the curled",
"15mm going fast ;Prime the extruder G92 E0 ; reset extrusion distance G1",
"``` The [RepRap Wiki](https://reprap.org/wiki/Start_GCode_routines) suggests that there could be made so much more",
"more from this. I would love to *swipe* the nozzle before starting to",
"the nozzle and make a bad first layer. **How does an example (commented)",
"basic code, after I dragged out the G-code handbook from the RepRap wiki",
"it, I ordered myself an Ender-3, a genuine 24V e3D hotend, inductive sensor",
"from the \"basic\" settings that a \"custom 3D printer\" on Marlin gave, but",
"tubing/clamps to cope with the problem the CR10/Ender line has occasionally. But now",
"myself an Ender-3, a genuine 24V e3D hotend, inductive sensor and some better",
"I would love to *swipe* the nozzle before starting to print, making sure",
"could be made so much more from this. I would love to *swipe*",
"make a bad first layer. **How does an example (commented) G-code for swiping",
"\"basic\" settings that a \"custom 3D printer\" on Marlin gave, but this time",
"to add the missing comments is: ``` G28 ;Home G1 Z15.0 F6000 ;Move",
"curled up filament from this first extrusion doesn't get squished against the nozzle"
] |
[
"into the sensor input: What do I have to do (besides making a",
"Ender 3. From the factory, it has an aluminium bed. So I also",
"things something dawns on me: The normal input and output voltage of a",
"as I read up on these things something dawns on me: The normal",
"V based Ender 3. From the factory, it has an aluminium bed. So",
"Inductive NPN NO 4 mm](https://www.amazon.de/gp/product/B071ZQ6VV6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) with 6-36 V operation current into the box",
"of a simple switch is 5 V, as sensors are ran on 5",
"also put this [LJ12 A3-4-Z/BX Inductive NPN NO 4 mm](https://www.amazon.de/gp/product/B071ZQ6VV6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) with 6-36 V",
"the factory, it has an aluminium bed. So I also put this [LJ12",
"want to fry my machine by putting in 24 V into the sensor",
"I am getting a 24 V based Ender 3. From the factory, it",
"V on most boards (and in digital logics). The sensors run on 6",
"this [LJ12 A3-4-Z/BX Inductive NPN NO 4 mm](https://www.amazon.de/gp/product/B071ZQ6VV6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) with 6-36 V operation current",
"putting in 24 V into the sensor input: What do I have to",
"in 24 V into the sensor input: What do I have to do",
"current into the box together with a few other spare parts. Now, as",
"parts. Now, as I read up on these things something dawns on me:",
"Now, as I read up on these things something dawns on me: The",
"on me: The normal input and output voltage of a simple switch is",
"on 6 V plus though. I do not want to fry my machine",
"machine by putting in 24 V into the sensor input: What do I",
"I also put this [LJ12 A3-4-Z/BX Inductive NPN NO 4 mm](https://www.amazon.de/gp/product/B071ZQ6VV6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) with 6-36",
"do not want to fry my machine by putting in 24 V into",
"a simple switch is 5 V, as sensors are ran on 5 V",
"24 V into the sensor input: What do I have to do (besides",
"voltage of a simple switch is 5 V, as sensors are ran on",
"based Ender 3. From the factory, it has an aluminium bed. So I",
"The sensors run on 6 V plus though. I do not want to",
"something dawns on me: The normal input and output voltage of a simple",
"to fry my machine by putting in 24 V into the sensor input:",
"up on these things something dawns on me: The normal input and output",
"output voltage of a simple switch is 5 V, as sensors are ran",
"I read up on these things something dawns on me: The normal input",
"am getting a 24 V based Ender 3. From the factory, it has",
"a 24 V based Ender 3. From the factory, it has an aluminium",
"me: The normal input and output voltage of a simple switch is 5",
"though. I do not want to fry my machine by putting in 24",
"bed. So I also put this [LJ12 A3-4-Z/BX Inductive NPN NO 4 mm](https://www.amazon.de/gp/product/B071ZQ6VV6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1)",
"getting a 24 V based Ender 3. From the factory, it has an",
"has an aluminium bed. So I also put this [LJ12 A3-4-Z/BX Inductive NPN",
"with a few other spare parts. Now, as I read up on these",
"6-36 V operation current into the box together with a few other spare",
"24 V based Ender 3. From the factory, it has an aluminium bed.",
"my machine by putting in 24 V into the sensor input: What do",
"other spare parts. Now, as I read up on these things something dawns",
"spare parts. Now, as I read up on these things something dawns on",
"The normal input and output voltage of a simple switch is 5 V,",
"as sensors are ran on 5 V on most boards (and in digital",
"box together with a few other spare parts. Now, as I read up",
"So I also put this [LJ12 A3-4-Z/BX Inductive NPN NO 4 mm](https://www.amazon.de/gp/product/B071ZQ6VV6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) with",
"(and in digital logics). The sensors run on 6 V plus though. I",
"and output voltage of a simple switch is 5 V, as sensors are",
"not want to fry my machine by putting in 24 V into the",
"logics). The sensors run on 6 V plus though. I do not want",
"V into the sensor input: What do I have to do (besides making",
"plus though. I do not want to fry my machine by putting in",
"mm](https://www.amazon.de/gp/product/B071ZQ6VV6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) with 6-36 V operation current into the box together with a few",
"4 mm](https://www.amazon.de/gp/product/B071ZQ6VV6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) with 6-36 V operation current into the box together with a",
"put this [LJ12 A3-4-Z/BX Inductive NPN NO 4 mm](https://www.amazon.de/gp/product/B071ZQ6VV6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) with 6-36 V operation",
"5 V, as sensors are ran on 5 V on most boards (and",
"together with a few other spare parts. Now, as I read up on",
"on these things something dawns on me: The normal input and output voltage",
"are ran on 5 V on most boards (and in digital logics). The",
"A3-4-Z/BX Inductive NPN NO 4 mm](https://www.amazon.de/gp/product/B071ZQ6VV6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) with 6-36 V operation current into the",
"ran on 5 V on most boards (and in digital logics). The sensors",
"the box together with a few other spare parts. Now, as I read",
"From the factory, it has an aluminium bed. So I also put this",
"an aluminium bed. So I also put this [LJ12 A3-4-Z/BX Inductive NPN NO",
"dawns on me: The normal input and output voltage of a simple switch",
"factory, it has an aluminium bed. So I also put this [LJ12 A3-4-Z/BX",
"normal input and output voltage of a simple switch is 5 V, as",
"on most boards (and in digital logics). The sensors run on 6 V",
"by putting in 24 V into the sensor input: What do I have",
"few other spare parts. Now, as I read up on these things something",
"operation current into the box together with a few other spare parts. Now,",
"fry my machine by putting in 24 V into the sensor input: What",
"simple switch is 5 V, as sensors are ran on 5 V on",
"most boards (and in digital logics). The sensors run on 6 V plus",
"3. From the factory, it has an aluminium bed. So I also put",
"[LJ12 A3-4-Z/BX Inductive NPN NO 4 mm](https://www.amazon.de/gp/product/B071ZQ6VV6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) with 6-36 V operation current into",
"run on 6 V plus though. I do not want to fry my",
"NO 4 mm](https://www.amazon.de/gp/product/B071ZQ6VV6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) with 6-36 V operation current into the box together with",
"these things something dawns on me: The normal input and output voltage of",
"aluminium bed. So I also put this [LJ12 A3-4-Z/BX Inductive NPN NO 4",
"read up on these things something dawns on me: The normal input and",
"a few other spare parts. Now, as I read up on these things",
"sensors are ran on 5 V on most boards (and in digital logics).",
"into the box together with a few other spare parts. Now, as I",
"boards (and in digital logics). The sensors run on 6 V plus though.",
"5 V on most boards (and in digital logics). The sensors run on",
"it has an aluminium bed. So I also put this [LJ12 A3-4-Z/BX Inductive",
"the sensor input: What do I have to do (besides making a mount)?",
"sensors run on 6 V plus though. I do not want to fry",
"switch is 5 V, as sensors are ran on 5 V on most",
"is 5 V, as sensors are ran on 5 V on most boards",
"V operation current into the box together with a few other spare parts.",
"I do not want to fry my machine by putting in 24 V",
"V plus though. I do not want to fry my machine by putting",
"with 6-36 V operation current into the box together with a few other",
"6 V plus though. I do not want to fry my machine by",
"on 5 V on most boards (and in digital logics). The sensors run",
"input and output voltage of a simple switch is 5 V, as sensors",
"in digital logics). The sensors run on 6 V plus though. I do",
"NPN NO 4 mm](https://www.amazon.de/gp/product/B071ZQ6VV6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) with 6-36 V operation current into the box together",
"V, as sensors are ran on 5 V on most boards (and in",
"digital logics). The sensors run on 6 V plus though. I do not"
] |
[
"the print itself is printed outside the heated bed, while there is some",
"the slicer before generating the G-code.* * How can I center the print",
"heated bed, while there is some space left at the opposite sites. It",
"not in the center. * Why is the print not centered on the",
"bed? *It was centered in the slicer before generating the G-code.* * How",
"opposite sites. It appears as if the print is not in the center.",
"bed, while there is some space left at the opposite sites. It appears",
"the heated build platform on my Anet A8, the brim or skirt or",
"print large prints close to (but not exceeding) the maximum dimensions of the",
"brim or skirt or the print itself is printed outside the heated bed,",
"(but not exceeding) the maximum dimensions of the heated build platform on my",
"platform on my Anet A8, the brim or skirt or the print itself",
"It appears as if the print is not in the center. * Why",
"if the print is not in the center. * Why is the print",
"A8, the brim or skirt or the print itself is printed outside the",
"to (but not exceeding) the maximum dimensions of the heated build platform on",
"slicer before generating the G-code.* * How can I center the print to",
"G-code.* * How can I center the print to make it fit on",
"* How can I center the print to make it fit on the",
"generating the G-code.* * How can I center the print to make it",
"not exceeding) the maximum dimensions of the heated build platform on my Anet",
"center. * Why is the print not centered on the bed? *It was",
"some space left at the opposite sites. It appears as if the print",
"can I center the print to make it fit on the heated build",
"before generating the G-code.* * How can I center the print to make",
"close to (but not exceeding) the maximum dimensions of the heated build platform",
"centered in the slicer before generating the G-code.* * How can I center",
"is printed outside the heated bed, while there is some space left at",
"or skirt or the print itself is printed outside the heated bed, while",
"itself is printed outside the heated bed, while there is some space left",
"*It was centered in the slicer before generating the G-code.* * How can",
"in the center. * Why is the print not centered on the bed?",
"Why is the print not centered on the bed? *It was centered in",
"heated build platform on my Anet A8, the brim or skirt or the",
"appears as if the print is not in the center. * Why is",
"while there is some space left at the opposite sites. It appears as",
"the print not centered on the bed? *It was centered in the slicer",
"or the print itself is printed outside the heated bed, while there is",
"skirt or the print itself is printed outside the heated bed, while there",
"dimensions of the heated build platform on my Anet A8, the brim or",
"centered on the bed? *It was centered in the slicer before generating the",
"maximum dimensions of the heated build platform on my Anet A8, the brim",
"the opposite sites. It appears as if the print is not in the",
"sites. It appears as if the print is not in the center. *",
"How can I center the print to make it fit on the heated",
"* Why is the print not centered on the bed? *It was centered",
"is the print not centered on the bed? *It was centered in the",
"not centered on the bed? *It was centered in the slicer before generating",
"the brim or skirt or the print itself is printed outside the heated",
"as if the print is not in the center. * Why is the",
"space left at the opposite sites. It appears as if the print is",
"the print is not in the center. * Why is the print not",
"large prints close to (but not exceeding) the maximum dimensions of the heated",
"Anet A8, the brim or skirt or the print itself is printed outside",
"outside the heated bed, while there is some space left at the opposite",
"at the opposite sites. It appears as if the print is not in",
"prints close to (but not exceeding) the maximum dimensions of the heated build",
"I print large prints close to (but not exceeding) the maximum dimensions of",
"my Anet A8, the brim or skirt or the print itself is printed",
"build platform on my Anet A8, the brim or skirt or the print",
"there is some space left at the opposite sites. It appears as if",
"the maximum dimensions of the heated build platform on my Anet A8, the",
"the G-code.* * How can I center the print to make it fit",
"When I print large prints close to (but not exceeding) the maximum dimensions",
"is some space left at the opposite sites. It appears as if the",
"print not centered on the bed? *It was centered in the slicer before",
"left at the opposite sites. It appears as if the print is not",
"was centered in the slicer before generating the G-code.* * How can I",
"of the heated build platform on my Anet A8, the brim or skirt",
"printed outside the heated bed, while there is some space left at the",
"exceeding) the maximum dimensions of the heated build platform on my Anet A8,",
"is not in the center. * Why is the print not centered on",
"in the slicer before generating the G-code.* * How can I center the",
"the bed? *It was centered in the slicer before generating the G-code.* *",
"on my Anet A8, the brim or skirt or the print itself is",
"the center. * Why is the print not centered on the bed? *It",
"print itself is printed outside the heated bed, while there is some space",
"I center the print to make it fit on the heated build platform?",
"print is not in the center. * Why is the print not centered",
"the heated bed, while there is some space left at the opposite sites.",
"on the bed? *It was centered in the slicer before generating the G-code.*"
] |
[
"filament flow Printed parts that fail: [![Top view printed part](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed",
"two parts on the left are printed in one job* [![Side view printed",
"i3 Extruder: E3D 1.75 all metal hotend. Nozzle: .4 Print temp: 260°C (max.",
"to troubleshoot 1. First I thought my nozzle was clogged. But it's not",
"Disabled retraction / disabled part cooling. 4. increased the max temp with 10",
"in one job* [![Side view printed part](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\")](https://i.stack.imgur.com/1jure.jpg \"Side view",
"having a lot of failed prints. They start off pretty well but after",
"part\")](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\") UPDATE 26/07 Dit a few more prints with",
"UPDATE 26/07 Dit a few more prints with PETG to eliminate the moisture",
"([HyperCube Evolution](https://www.thingiverse.com/thing:2254103) CoreXY), using Colorfabb XT filament. After several successful prints. I'm having",
"part](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\")](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\") UPDATE 26/07 Dit a",
"Evolution](https://www.thingiverse.com/thing:2254103) CoreXY), using Colorfabb XT filament. After several successful prints. I'm having a",
"printed part](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\")](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\") UPDATE 26/07 Dit",
"recommended). ``` Steps I took to troubleshoot 1. First I thought my nozzle",
"temp with 10 % to ensure the filament flow Printed parts that fail:",
"all metal hotend. Nozzle: .4 Print temp: 260°C (max. recommended). ``` Steps I",
"printed in one job* [![Side view printed part](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\")](https://i.stack.imgur.com/1jure.jpg \"Side",
"layers the filament starts to string and blob. Printer details ``` Model: RepRap",
"XT filament. After several successful prints. I'm having a lot of failed prints.",
"a few more prints with PETG to eliminate the moisture problem. Same results.",
"the max temp with 10 % to ensure the filament flow Printed parts",
"3. Disabled retraction / disabled part cooling. 4. increased the max temp with",
"for a HEVO ([HyperCube Evolution](https://www.thingiverse.com/thing:2254103) CoreXY), using Colorfabb XT filament. After several successful",
"``` Steps I took to troubleshoot 1. First I thought my nozzle was",
"/ disabled part cooling. 4. increased the max temp with 10 % to",
"~15 layers the filament starts to string and blob. Printer details ``` Model:",
"\"Top view printed part\") *Note: the two parts on the left are printed",
"part](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\")](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\") *Note: the two parts",
"are printed in one job* [![Side view printed part](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\")](https://i.stack.imgur.com/1jure.jpg",
"on the left are printed in one job* [![Side view printed part](https://i.stack.imgur.com/1jure.jpg \"Side",
"Nozzle: .4 Print temp: 260°C (max. recommended). ``` Steps I took to troubleshoot",
"view printed part](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\")](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\") UPDATE 26/07",
"Print temp: 260°C (max. recommended). ``` Steps I took to troubleshoot 1. First",
"details ``` Model: RepRap i3 Extruder: E3D 1.75 all metal hotend. Nozzle: .4",
"\"Top view printed part\")](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\") *Note: the two parts on",
"off pretty well but after ~15 layers the filament starts to string and",
"ensure the filament flow Printed parts that fail: [![Top view printed part](https://i.stack.imgur.com/2wEjO.jpg \"Top",
"view printed part](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\")](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\") *Note: the",
"was clogged. But it's not I can push the filament by hand without",
"speed to 35 mm/s. 3. Disabled retraction / disabled part cooling. 4. increased",
"max temp with 10 % to ensure the filament flow Printed parts that",
"metal hotend. Nozzle: .4 Print temp: 260°C (max. recommended). ``` Steps I took",
"2. Lowered the speed to 35 mm/s. 3. Disabled retraction / disabled part",
"a HEVO ([HyperCube Evolution](https://www.thingiverse.com/thing:2254103) CoreXY), using Colorfabb XT filament. After several successful prints.",
"``` Model: RepRap i3 Extruder: E3D 1.75 all metal hotend. Nozzle: .4 Print",
"of failed prints. They start off pretty well but after ~15 layers the",
"view printed part\")](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\") UPDATE 26/07 Dit a few more",
"Dit a few more prints with PETG to eliminate the moisture problem. Same",
"I took to troubleshoot 1. First I thought my nozzle was clogged. But",
"push the filament by hand without issues. 2. Lowered the speed to 35",
"starts to string and blob. Printer details ``` Model: RepRap i3 Extruder: E3D",
"part\") UPDATE 26/07 Dit a few more prints with PETG to eliminate the",
"1. First I thought my nozzle was clogged. But it's not I can",
"hand without issues. 2. Lowered the speed to 35 mm/s. 3. Disabled retraction",
"after ~15 layers the filament starts to string and blob. Printer details ```",
"[![Top view printed part](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\")](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\") *Note:",
"26/07 Dit a few more prints with PETG to eliminate the moisture problem.",
"the filament flow Printed parts that fail: [![Top view printed part](https://i.stack.imgur.com/2wEjO.jpg \"Top view",
"parts on the left are printed in one job* [![Side view printed part](https://i.stack.imgur.com/1jure.jpg",
"blob. Printer details ``` Model: RepRap i3 Extruder: E3D 1.75 all metal hotend.",
".4 Print temp: 260°C (max. recommended). ``` Steps I took to troubleshoot 1.",
"nozzle was clogged. But it's not I can push the filament by hand",
"[![Side view printed part](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\")](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\") UPDATE",
"I thought my nozzle was clogged. But it's not I can push the",
"job* [![Side view printed part](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\")](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\")",
"retraction / disabled part cooling. 4. increased the max temp with 10 %",
"filament. After several successful prints. I'm having a lot of failed prints. They",
"clogged. But it's not I can push the filament by hand without issues.",
"the left are printed in one job* [![Side view printed part](https://i.stack.imgur.com/1jure.jpg \"Side view",
"\"Side view printed part\") UPDATE 26/07 Dit a few more prints with PETG",
"260°C (max. recommended). ``` Steps I took to troubleshoot 1. First I thought",
"view printed part\") UPDATE 26/07 Dit a few more prints with PETG to",
"but after ~15 layers the filament starts to string and blob. Printer details",
"printed part\")](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\") UPDATE 26/07 Dit a few more prints",
"printed part\") *Note: the two parts on the left are printed in one",
"printed part\") UPDATE 26/07 Dit a few more prints with PETG to eliminate",
"pretty well but after ~15 layers the filament starts to string and blob.",
"several successful prints. I'm having a lot of failed prints. They start off",
"to string and blob. Printer details ``` Model: RepRap i3 Extruder: E3D 1.75",
"prints. I'm having a lot of failed prints. They start off pretty well",
"filament starts to string and blob. Printer details ``` Model: RepRap i3 Extruder:",
"and blob. Printer details ``` Model: RepRap i3 Extruder: E3D 1.75 all metal",
"that fail: [![Top view printed part](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\")](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed",
"it's not I can push the filament by hand without issues. 2. Lowered",
"printed part\")](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\") *Note: the two parts on the left",
"fail: [![Top view printed part](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\")](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\")",
"flow Printed parts that fail: [![Top view printed part](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\")](https://i.stack.imgur.com/2wEjO.jpg",
"printed part](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\")](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\") *Note: the two",
"\"Side view printed part\")](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\") UPDATE 26/07 Dit a few",
"parts for a HEVO ([HyperCube Evolution](https://www.thingiverse.com/thing:2254103) CoreXY), using Colorfabb XT filament. After several",
"HEVO ([HyperCube Evolution](https://www.thingiverse.com/thing:2254103) CoreXY), using Colorfabb XT filament. After several successful prints. I'm",
"(max. recommended). ``` Steps I took to troubleshoot 1. First I thought my",
"view printed part\")](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\") *Note: the two parts on the",
"the filament starts to string and blob. Printer details ``` Model: RepRap i3",
"printing parts for a HEVO ([HyperCube Evolution](https://www.thingiverse.com/thing:2254103) CoreXY), using Colorfabb XT filament. After",
"Model: RepRap i3 Extruder: E3D 1.75 all metal hotend. Nozzle: .4 Print temp:",
"4. increased the max temp with 10 % to ensure the filament flow",
"with 10 % to ensure the filament flow Printed parts that fail: [![Top",
"lot of failed prints. They start off pretty well but after ~15 layers",
"view printed part\") *Note: the two parts on the left are printed in",
"to ensure the filament flow Printed parts that fail: [![Top view printed part](https://i.stack.imgur.com/2wEjO.jpg",
"prints. They start off pretty well but after ~15 layers the filament starts",
"string and blob. Printer details ``` Model: RepRap i3 Extruder: E3D 1.75 all",
"Printer details ``` Model: RepRap i3 Extruder: E3D 1.75 all metal hotend. Nozzle:",
"successful prints. I'm having a lot of failed prints. They start off pretty",
"part\") *Note: the two parts on the left are printed in one job*",
"one job* [![Side view printed part](https://i.stack.imgur.com/1jure.jpg \"Side view printed part\")](https://i.stack.imgur.com/1jure.jpg \"Side view printed",
"1.75 all metal hotend. Nozzle: .4 Print temp: 260°C (max. recommended). ``` Steps",
"increased the max temp with 10 % to ensure the filament flow Printed",
"more prints with PETG to eliminate the moisture problem. Same results. [](https://i.stack.imgur.com/l6vj4.jpg) [](https://i.stack.imgur.com/GL1IF.jpg)",
"But it's not I can push the filament by hand without issues. 2.",
"*Note: the two parts on the left are printed in one job* [ CoreXY), using Colorfabb XT filament.",
"failed prints. They start off pretty well but after ~15 layers the filament",
"my nozzle was clogged. But it's not I can push the filament by",
"Steps I took to troubleshoot 1. First I thought my nozzle was clogged.",
"issues. 2. Lowered the speed to 35 mm/s. 3. Disabled retraction / disabled",
"using Colorfabb XT filament. After several successful prints. I'm having a lot of",
"without issues. 2. Lowered the speed to 35 mm/s. 3. Disabled retraction /",
"filament by hand without issues. 2. Lowered the speed to 35 mm/s. 3.",
"Printed parts that fail: [![Top view printed part](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\")](https://i.stack.imgur.com/2wEjO.jpg \"Top",
"a lot of failed prints. They start off pretty well but after ~15",
"After several successful prints. I'm having a lot of failed prints. They start",
"RepRap i3 Extruder: E3D 1.75 all metal hotend. Nozzle: .4 Print temp: 260°C",
"mm/s. 3. Disabled retraction / disabled part cooling. 4. increased the max temp",
"Extruder: E3D 1.75 all metal hotend. Nozzle: .4 Print temp: 260°C (max. recommended).",
"took to troubleshoot 1. First I thought my nozzle was clogged. But it's",
"First I thought my nozzle was clogged. But it's not I can push",
"to 35 mm/s. 3. Disabled retraction / disabled part cooling. 4. increased the",
"CoreXY), using Colorfabb XT filament. After several successful prints. I'm having a lot",
"by hand without issues. 2. Lowered the speed to 35 mm/s. 3. Disabled",
"left are printed in one job* [![Side view printed part](https://i.stack.imgur.com/1jure.jpg \"Side view printed",
"not I can push the filament by hand without issues. 2. Lowered the",
"35 mm/s. 3. Disabled retraction / disabled part cooling. 4. increased the max",
"disabled part cooling. 4. increased the max temp with 10 % to ensure",
"E3D 1.75 all metal hotend. Nozzle: .4 Print temp: 260°C (max. recommended). ```",
"They start off pretty well but after ~15 layers the filament starts to",
"I can push the filament by hand without issues. 2. Lowered the speed",
"part\")](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\") *Note: the two parts on the left are",
"hotend. Nozzle: .4 Print temp: 260°C (max. recommended). ``` Steps I took to",
"temp: 260°C (max. recommended). ``` Steps I took to troubleshoot 1. First I",
"the filament by hand without issues. 2. Lowered the speed to 35 mm/s.",
"can push the filament by hand without issues. 2. Lowered the speed to",
"10 % to ensure the filament flow Printed parts that fail: [![Top view",
"thought my nozzle was clogged. But it's not I can push the filament",
"Colorfabb XT filament. After several successful prints. I'm having a lot of failed",
"troubleshoot 1. First I thought my nozzle was clogged. But it's not I",
"the speed to 35 mm/s. 3. Disabled retraction / disabled part cooling. 4.",
"parts that fail: [![Top view printed part](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed part\")](https://i.stack.imgur.com/2wEjO.jpg \"Top view",
"few more prints with PETG to eliminate the moisture problem. Same results. [](https://i.stack.imgur.com/l6vj4.jpg)",
"I'm having a lot of failed prints. They start off pretty well but",
"start off pretty well but after ~15 layers the filament starts to string",
"part cooling. 4. increased the max temp with 10 % to ensure the",
"Lowered the speed to 35 mm/s. 3. Disabled retraction / disabled part cooling.",
"the two parts on the left are printed in one job* [![Side view",
"% to ensure the filament flow Printed parts that fail: [![Top view printed",
"cooling. 4. increased the max temp with 10 % to ensure the filament",
"well but after ~15 layers the filament starts to string and blob. Printer"
] |
[
"can perform such an end-of-print action on my CR-10 with a cura plugin?",
"description I read; does anyone know what this process is called? Is there",
"perform such an end-of-print action on my CR-10 with a cura plugin? If",
"about a guy who found a way to knock over completed prints with",
"CR-10 with a cura plugin? If such a thing takes a touch of",
"It doesn't work with skirts (duh), and the adhesion has to be just",
"Well, now I cannot re-find the description I read; does anyone know what",
"end-time custom gcode, is there a proof of concept rough draft or demo",
"such a thing takes a touch of end-time custom gcode, is there a",
"slide them to the edge of the build plate, where they fall into",
"action on my CR-10 with a cura plugin? If such a thing takes",
"a way to knock over completed prints with the printer head itself, then",
"itself, then slide them to the edge of the build plate, where they",
"with a pile of spaghetti, but it still sounds useful. Well, now I",
"an easy way I can perform such an end-of-print action on my CR-10",
"fall into a box/basket. This allows printing several Eiffel Towers while you sleep",
"takes a touch of end-time custom gcode, is there a proof of concept",
"thing takes a touch of end-time custom gcode, is there a proof of",
"work with skirts (duh), and the adhesion has to be just right not",
"completed prints with the printer head itself, then slide them to the edge",
"is called? Is there an easy way I can perform such an end-of-print",
"my CR-10 with a cura plugin? If such a thing takes a touch",
"cannot re-find the description I read; does anyone know what this process is",
"Eiffel Towers while you sleep for example. It doesn't work with skirts (duh),",
"of spaghetti, but it still sounds useful. Well, now I cannot re-find the",
"with the printer head itself, then slide them to the edge of the",
"for example. It doesn't work with skirts (duh), and the adhesion has to",
"the other day about a guy who found a way to knock over",
"other day about a guy who found a way to knock over completed",
"If such a thing takes a touch of end-time custom gcode, is there",
"up with a pile of spaghetti, but it still sounds useful. Well, now",
"into a box/basket. This allows printing several Eiffel Towers while you sleep for",
"Towers while you sleep for example. It doesn't work with skirts (duh), and",
"day about a guy who found a way to knock over completed prints",
"to knock over completed prints with the printer head itself, then slide them",
"wake up with a pile of spaghetti, but it still sounds useful. Well,",
"several Eiffel Towers while you sleep for example. It doesn't work with skirts",
"such an end-of-print action on my CR-10 with a cura plugin? If such",
"with skirts (duh), and the adhesion has to be just right not to",
"a cura plugin? If such a thing takes a touch of end-time custom",
"is there a proof of concept rough draft or demo I can start",
"while you sleep for example. It doesn't work with skirts (duh), and the",
"the description I read; does anyone know what this process is called? Is",
"allows printing several Eiffel Towers while you sleep for example. It doesn't work",
"of the build plate, where they fall into a box/basket. This allows printing",
"right not to wake up with a pile of spaghetti, but it still",
"box/basket. This allows printing several Eiffel Towers while you sleep for example. It",
"a pile of spaghetti, but it still sounds useful. Well, now I cannot",
"an end-of-print action on my CR-10 with a cura plugin? If such a",
"edge of the build plate, where they fall into a box/basket. This allows",
"you sleep for example. It doesn't work with skirts (duh), and the adhesion",
"example. It doesn't work with skirts (duh), and the adhesion has to be",
"not to wake up with a pile of spaghetti, but it still sounds",
"(duh), and the adhesion has to be just right not to wake up",
"way I can perform such an end-of-print action on my CR-10 with a",
"sleep for example. It doesn't work with skirts (duh), and the adhesion has",
"on my CR-10 with a cura plugin? If such a thing takes a",
"a touch of end-time custom gcode, is there a proof of concept rough",
"something the other day about a guy who found a way to knock",
"build plate, where they fall into a box/basket. This allows printing several Eiffel",
"a guy who found a way to knock over completed prints with the",
"with a cura plugin? If such a thing takes a touch of end-time",
"they fall into a box/basket. This allows printing several Eiffel Towers while you",
"anyone know what this process is called? Is there an easy way I",
"end-of-print action on my CR-10 with a cura plugin? If such a thing",
"called? Is there an easy way I can perform such an end-of-print action",
"the printer head itself, then slide them to the edge of the build",
"plate, where they fall into a box/basket. This allows printing several Eiffel Towers",
"them to the edge of the build plate, where they fall into a",
"knock over completed prints with the printer head itself, then slide them to",
"to be just right not to wake up with a pile of spaghetti,",
"skirts (duh), and the adhesion has to be just right not to wake",
"know what this process is called? Is there an easy way I can",
"now I cannot re-find the description I read; does anyone know what this",
"re-find the description I read; does anyone know what this process is called?",
"process is called? Is there an easy way I can perform such an",
"prints with the printer head itself, then slide them to the edge of",
"read something the other day about a guy who found a way to",
"touch of end-time custom gcode, is there a proof of concept rough draft",
"gcode, is there a proof of concept rough draft or demo I can",
"still sounds useful. Well, now I cannot re-find the description I read; does",
"just right not to wake up with a pile of spaghetti, but it",
"useful. Well, now I cannot re-find the description I read; does anyone know",
"but it still sounds useful. Well, now I cannot re-find the description I",
"Is there an easy way I can perform such an end-of-print action on",
"a box/basket. This allows printing several Eiffel Towers while you sleep for example.",
"the adhesion has to be just right not to wake up with a",
"found a way to knock over completed prints with the printer head itself,",
"there an easy way I can perform such an end-of-print action on my",
"over completed prints with the printer head itself, then slide them to the",
"of concept rough draft or demo I can start tinkering with? Any more",
"I read; does anyone know what this process is called? Is there an",
"concept rough draft or demo I can start tinkering with? Any more info",
"proof of concept rough draft or demo I can start tinkering with? Any",
"printer head itself, then slide them to the edge of the build plate,",
"doesn't work with skirts (duh), and the adhesion has to be just right",
"pile of spaghetti, but it still sounds useful. Well, now I cannot re-find",
"it still sounds useful. Well, now I cannot re-find the description I read;",
"who found a way to knock over completed prints with the printer head",
"of end-time custom gcode, is there a proof of concept rough draft or",
"I can perform such an end-of-print action on my CR-10 with a cura",
"a proof of concept rough draft or demo I can start tinkering with?",
"adhesion has to be just right not to wake up with a pile",
"guy who found a way to knock over completed prints with the printer",
"head itself, then slide them to the edge of the build plate, where",
"cura plugin? If such a thing takes a touch of end-time custom gcode,",
"to wake up with a pile of spaghetti, but it still sounds useful.",
"has to be just right not to wake up with a pile of",
"this process is called? Is there an easy way I can perform such",
"I cannot re-find the description I read; does anyone know what this process",
"spaghetti, but it still sounds useful. Well, now I cannot re-find the description",
"rough draft or demo I can start tinkering with? Any more info is",
"I read something the other day about a guy who found a way",
"what this process is called? Is there an easy way I can perform",
"sounds useful. Well, now I cannot re-find the description I read; does anyone",
"the build plate, where they fall into a box/basket. This allows printing several",
"printing several Eiffel Towers while you sleep for example. It doesn't work with",
"where they fall into a box/basket. This allows printing several Eiffel Towers while",
"plugin? If such a thing takes a touch of end-time custom gcode, is",
"does anyone know what this process is called? Is there an easy way",
"there a proof of concept rough draft or demo I can start tinkering",
"way to knock over completed prints with the printer head itself, then slide",
"easy way I can perform such an end-of-print action on my CR-10 with",
"and the adhesion has to be just right not to wake up with",
"the edge of the build plate, where they fall into a box/basket. This",
"to the edge of the build plate, where they fall into a box/basket.",
"a thing takes a touch of end-time custom gcode, is there a proof",
"read; does anyone know what this process is called? Is there an easy",
"then slide them to the edge of the build plate, where they fall",
"custom gcode, is there a proof of concept rough draft or demo I",
"draft or demo I can start tinkering with? Any more info is helpful.",
"be just right not to wake up with a pile of spaghetti, but",
"This allows printing several Eiffel Towers while you sleep for example. It doesn't"
] |
[
"voltage of slightly over 12V right from the beginning. Hence, I suspect the",
"lead to the startup noise appearing again. Only when waiting for multiple minutes",
"RAMPS 1.4 board. The hotend cooling fan is connected to the 12V-AUX pin",
"is receiving a higher amount of current than it should. Moreover, the noise",
"on the extruder heatsink. --- Shutting down the printer (even literally unplugging the",
"but fluctuates slightly. After about 30 seconds, it gets slightly quieter; after about",
"replica and a RAMPS 1.4 board. The hotend cooling fan is connected to",
"axis stepper driver) on the RAMPS board so that it continuously receives power",
"Note that I am not talking about a fan for cooling the extruded",
"printer (even literally unplugging the power supply) and plugging it back in does",
"sounds heard. It starts at 110 - 115 mA. When the fan is",
"of slightly over 12V right from the beginning. Hence, I suspect the issue",
"not steady, but fluctuates slightly. After about 30 seconds, it gets slightly quieter;",
"power supply, an Arduino Mega 2560 replica and a RAMPS 1.4 board. The",
"is there more to worry about? You can listen to a recording of",
"constant and correct voltage of slightly over 12V right from the beginning. Hence,",
"is connected to the 12V-AUX pin (the one right next to the x",
"I am worried about this being more than a problem of unpleasant noisiness.",
"be the cause and is there more to worry about? You can listen",
"talking about a fan for cooling the extruded plastic, but the one sitting",
"when waiting for multiple minutes before reconnecting does it happen again. The voltage",
"the sounds heard. It starts at 110 - 115 mA. When the fan",
"to the fan is measured to be constant. The current, on the other",
"noise is not steady, but fluctuates slightly. After about 30 seconds, it gets",
"again. Only when waiting for multiple minutes before reconnecting does it happen again.",
"correlates with the sounds heard. It starts at 110 - 115 mA. When",
"30 seconds, it gets slightly quieter; after about 40-50 seconds, there is a",
"keeping a constant and correct voltage of slightly over 12V right from the",
"slightly quieter; after about 40-50 seconds, there is a sudden break. From then",
"the 12V-AUX pin (the one right next to the x axis stepper driver)",
"the other hand, correlates with the sounds heard. It starts at 110 -",
"and correct voltage of slightly over 12V right from the beginning. Hence, I",
"heatsink. --- Shutting down the printer (even literally unplugging the power supply) and",
"firmware. When I give power to the board, the cooling fan starts spinning",
"fan spins quietly and regularly. According to measurements with a multimeter, the power",
"not talking about a fan for cooling the extruded plastic, but the one",
"power to the board, the cooling fan starts spinning with a lot of",
"built a 3D printer from parts. It is using a standard 12V power",
"correct voltage of slightly over 12V right from the beginning. Hence, I suspect",
"power as long as the machine is turned on. The printer is controlled",
"the Marlin firmware. When I give power to the board, the cooling fan",
"the beginning. Hence, I suspect the issue is somewhere on the RAMPS board.",
"cooling fan starts spinning with a lot of noise. It sounds like it",
"- 115 mA. When the fan is quiet, it is at about 90",
"suspect the issue is somewhere on the RAMPS board. I am worried about",
"fan for cooling the extruded plastic, but the one sitting on the extruder",
"Arduino Mega 2560 replica and a RAMPS 1.4 board. The hotend cooling fan",
"is controlled by the Marlin firmware. When I give power to the board,",
"does not lead to the startup noise appearing again. Only when waiting for",
"it is receiving a higher amount of current than it should. Moreover, the",
"reconnecting does it happen again. The voltage to the fan is measured to",
"cooling fan is connected to the 12V-AUX pin (the one right next to",
"Hence, I suspect the issue is somewhere on the RAMPS board. I am",
"quieter; after about 40-50 seconds, there is a sudden break. From then on,",
"the fan is measured to be constant. The current, on the other hand,",
"the one sitting on the extruder heatsink. --- Shutting down the printer (even",
"a recording of the sound: [3D printer hotend cooling fan noise](https://soundcloud.com/user-769347820/3d-printer-hotend-cooling-fan-noise/s-OizCr) Note that",
"before reconnecting does it happen again. The voltage to the fan is measured",
"The hotend cooling fan is connected to the 12V-AUX pin (the one right",
"It sounds like it is receiving a higher amount of current than it",
"and regularly. According to measurements with a multimeter, the power supply is keeping",
"starts at 110 - 115 mA. When the fan is quiet, it is",
"noise. It sounds like it is receiving a higher amount of current than",
"I give power to the board, the cooling fan starts spinning with a",
"slightly. After about 30 seconds, it gets slightly quieter; after about 40-50 seconds,",
"to the board, the cooling fan starts spinning with a lot of noise.",
"have built a 3D printer from parts. It is using a standard 12V",
"to measurements with a multimeter, the power supply is keeping a constant and",
"supply is keeping a constant and correct voltage of slightly over 12V right",
"a constant and correct voltage of slightly over 12V right from the beginning.",
"spinning with a lot of noise. It sounds like it is receiving a",
"in does not lead to the startup noise appearing again. Only when waiting",
"is measured to be constant. The current, on the other hand, correlates with",
"printer is controlled by the Marlin firmware. When I give power to the",
"on the other hand, correlates with the sounds heard. It starts at 110",
"machine is turned on. The printer is controlled by the Marlin firmware. When",
"continuously receives power as long as the machine is turned on. The printer",
"so that it continuously receives power as long as the machine is turned",
"can listen to a recording of the sound: [3D printer hotend cooling fan",
"problem of unpleasant noisiness. What could be the cause and is there more",
"12V-AUX pin (the one right next to the x axis stepper driver) on",
"like it is receiving a higher amount of current than it should. Moreover,",
"of unpleasant noisiness. What could be the cause and is there more to",
"and is there more to worry about? You can listen to a recording",
"a RAMPS 1.4 board. The hotend cooling fan is connected to the 12V-AUX",
"regularly. According to measurements with a multimeter, the power supply is keeping a",
"hotend cooling fan noise](https://soundcloud.com/user-769347820/3d-printer-hotend-cooling-fan-noise/s-OizCr) Note that I am not talking about a fan",
"115 mA. When the fan is quiet, it is at about 90 mA.",
"power supply) and plugging it back in does not lead to the startup",
"controlled by the Marlin firmware. When I give power to the board, the",
"board. The hotend cooling fan is connected to the 12V-AUX pin (the one",
"the machine is turned on. The printer is controlled by the Marlin firmware.",
"gets slightly quieter; after about 40-50 seconds, there is a sudden break. From",
"it should. Moreover, the noise is not steady, but fluctuates slightly. After about",
"of the sound: [3D printer hotend cooling fan noise](https://soundcloud.com/user-769347820/3d-printer-hotend-cooling-fan-noise/s-OizCr) Note that I am",
"beginning. Hence, I suspect the issue is somewhere on the RAMPS board. I",
"noisiness. What could be the cause and is there more to worry about?",
"about? You can listen to a recording of the sound: [3D printer hotend",
"listen to a recording of the sound: [3D printer hotend cooling fan noise](https://soundcloud.com/user-769347820/3d-printer-hotend-cooling-fan-noise/s-OizCr)",
"as long as the machine is turned on. The printer is controlled by",
"a lot of noise. It sounds like it is receiving a higher amount",
"The current, on the other hand, correlates with the sounds heard. It starts",
"the printer (even literally unplugging the power supply) and plugging it back in",
"hotend cooling fan is connected to the 12V-AUX pin (the one right next",
"should. Moreover, the noise is not steady, but fluctuates slightly. After about 30",
"this being more than a problem of unpleasant noisiness. What could be the",
"receiving a higher amount of current than it should. Moreover, the noise is",
"You can listen to a recording of the sound: [3D printer hotend cooling",
"sound: [3D printer hotend cooling fan noise](https://soundcloud.com/user-769347820/3d-printer-hotend-cooling-fan-noise/s-OizCr) Note that I am not talking",
"--- Shutting down the printer (even literally unplugging the power supply) and plugging",
"the startup noise appearing again. Only when waiting for multiple minutes before reconnecting",
"worried about this being more than a problem of unpleasant noisiness. What could",
"hand, correlates with the sounds heard. It starts at 110 - 115 mA.",
"of current than it should. Moreover, the noise is not steady, but fluctuates",
"After about 30 seconds, it gets slightly quieter; after about 40-50 seconds, there",
"the RAMPS board. I am worried about this being more than a problem",
"unpleasant noisiness. What could be the cause and is there more to worry",
"minutes before reconnecting does it happen again. The voltage to the fan is",
"right next to the x axis stepper driver) on the RAMPS board so",
"is not steady, but fluctuates slightly. After about 30 seconds, it gets slightly",
"and a RAMPS 1.4 board. The hotend cooling fan is connected to the",
"the extruded plastic, but the one sitting on the extruder heatsink. --- Shutting",
"a multimeter, the power supply is keeping a constant and correct voltage of",
"there more to worry about? You can listen to a recording of the",
"3D printer from parts. It is using a standard 12V power supply, an",
"break. From then on, the fan spins quietly and regularly. According to measurements",
"over 12V right from the beginning. Hence, I suspect the issue is somewhere",
"fan starts spinning with a lot of noise. It sounds like it is",
"sitting on the extruder heatsink. --- Shutting down the printer (even literally unplugging",
"could be the cause and is there more to worry about? You can",
"the cause and is there more to worry about? You can listen to",
"long as the machine is turned on. The printer is controlled by the",
"one sitting on the extruder heatsink. --- Shutting down the printer (even literally",
"am not talking about a fan for cooling the extruded plastic, but the",
"again. The voltage to the fan is measured to be constant. The current,",
"more to worry about? You can listen to a recording of the sound:",
"x axis stepper driver) on the RAMPS board so that it continuously receives",
"to the x axis stepper driver) on the RAMPS board so that it",
"RAMPS board. I am worried about this being more than a problem of",
"it happen again. The voltage to the fan is measured to be constant.",
"than a problem of unpleasant noisiness. What could be the cause and is",
"for cooling the extruded plastic, but the one sitting on the extruder heatsink.",
"the power supply) and plugging it back in does not lead to the",
"I have built a 3D printer from parts. It is using a standard",
"steady, but fluctuates slightly. After about 30 seconds, it gets slightly quieter; after",
"sudden break. From then on, the fan spins quietly and regularly. According to",
"extruded plastic, but the one sitting on the extruder heatsink. --- Shutting down",
"to worry about? You can listen to a recording of the sound: [3D",
"sounds like it is receiving a higher amount of current than it should.",
"right from the beginning. Hence, I suspect the issue is somewhere on the",
"the RAMPS board so that it continuously receives power as long as the",
"am worried about this being more than a problem of unpleasant noisiness. What",
"Marlin firmware. When I give power to the board, the cooling fan starts",
"a standard 12V power supply, an Arduino Mega 2560 replica and a RAMPS",
"to the 12V-AUX pin (the one right next to the x axis stepper",
"pin (the one right next to the x axis stepper driver) on the",
"the fan spins quietly and regularly. According to measurements with a multimeter, the",
"spins quietly and regularly. According to measurements with a multimeter, the power supply",
"According to measurements with a multimeter, the power supply is keeping a constant",
"amount of current than it should. Moreover, the noise is not steady, but",
"board so that it continuously receives power as long as the machine is",
"than it should. Moreover, the noise is not steady, but fluctuates slightly. After",
"about 30 seconds, it gets slightly quieter; after about 40-50 seconds, there is",
"the x axis stepper driver) on the RAMPS board so that it continuously",
"but the one sitting on the extruder heatsink. --- Shutting down the printer",
"literally unplugging the power supply) and plugging it back in does not lead",
"with the sounds heard. It starts at 110 - 115 mA. When the",
"heard. It starts at 110 - 115 mA. When the fan is quiet,",
"Shutting down the printer (even literally unplugging the power supply) and plugging it",
"be constant. The current, on the other hand, correlates with the sounds heard.",
"is using a standard 12V power supply, an Arduino Mega 2560 replica and",
"12V power supply, an Arduino Mega 2560 replica and a RAMPS 1.4 board.",
"on the RAMPS board so that it continuously receives power as long as",
"being more than a problem of unpleasant noisiness. What could be the cause",
"connected to the 12V-AUX pin (the one right next to the x axis",
"fan noise](https://soundcloud.com/user-769347820/3d-printer-hotend-cooling-fan-noise/s-OizCr) Note that I am not talking about a fan for cooling",
"give power to the board, the cooling fan starts spinning with a lot",
"lot of noise. It sounds like it is receiving a higher amount of",
"power supply is keeping a constant and correct voltage of slightly over 12V",
"to the startup noise appearing again. Only when waiting for multiple minutes before",
"after about 40-50 seconds, there is a sudden break. From then on, the",
"measured to be constant. The current, on the other hand, correlates with the",
"about a fan for cooling the extruded plastic, but the one sitting on",
"next to the x axis stepper driver) on the RAMPS board so that",
"2560 replica and a RAMPS 1.4 board. The hotend cooling fan is connected",
"by the Marlin firmware. When I give power to the board, the cooling",
"multimeter, the power supply is keeping a constant and correct voltage of slightly",
"for multiple minutes before reconnecting does it happen again. The voltage to the",
"on, the fan spins quietly and regularly. According to measurements with a multimeter,",
"board, the cooling fan starts spinning with a lot of noise. It sounds",
"current than it should. Moreover, the noise is not steady, but fluctuates slightly.",
"cooling fan noise](https://soundcloud.com/user-769347820/3d-printer-hotend-cooling-fan-noise/s-OizCr) Note that I am not talking about a fan for",
"that I am not talking about a fan for cooling the extruded plastic,",
"noise appearing again. Only when waiting for multiple minutes before reconnecting does it",
"The voltage to the fan is measured to be constant. The current, on",
"When I give power to the board, the cooling fan starts spinning with",
"board. I am worried about this being more than a problem of unpleasant",
"turned on. The printer is controlled by the Marlin firmware. When I give",
"an Arduino Mega 2560 replica and a RAMPS 1.4 board. The hotend cooling",
"parts. It is using a standard 12V power supply, an Arduino Mega 2560",
"other hand, correlates with the sounds heard. It starts at 110 - 115",
"happen again. The voltage to the fan is measured to be constant. The",
"the noise is not steady, but fluctuates slightly. After about 30 seconds, it",
"supply, an Arduino Mega 2560 replica and a RAMPS 1.4 board. The hotend",
"printer hotend cooling fan noise](https://soundcloud.com/user-769347820/3d-printer-hotend-cooling-fan-noise/s-OizCr) Note that I am not talking about a",
"printer from parts. It is using a standard 12V power supply, an Arduino",
"extruder heatsink. --- Shutting down the printer (even literally unplugging the power supply)",
"startup noise appearing again. Only when waiting for multiple minutes before reconnecting does",
"worry about? You can listen to a recording of the sound: [3D printer",
"(the one right next to the x axis stepper driver) on the RAMPS",
"It is using a standard 12V power supply, an Arduino Mega 2560 replica",
"40-50 seconds, there is a sudden break. From then on, the fan spins",
"quietly and regularly. According to measurements with a multimeter, the power supply is",
"recording of the sound: [3D printer hotend cooling fan noise](https://soundcloud.com/user-769347820/3d-printer-hotend-cooling-fan-noise/s-OizCr) Note that I",
"does it happen again. The voltage to the fan is measured to be",
"from the beginning. Hence, I suspect the issue is somewhere on the RAMPS",
"It starts at 110 - 115 mA. When the fan is quiet, it",
"current, on the other hand, correlates with the sounds heard. It starts at",
"the issue is somewhere on the RAMPS board. I am worried about this",
"the extruder heatsink. --- Shutting down the printer (even literally unplugging the power",
"from parts. It is using a standard 12V power supply, an Arduino Mega",
"it back in does not lead to the startup noise appearing again. Only",
"it gets slightly quieter; after about 40-50 seconds, there is a sudden break.",
"to a recording of the sound: [3D printer hotend cooling fan noise](https://soundcloud.com/user-769347820/3d-printer-hotend-cooling-fan-noise/s-OizCr) Note",
"with a multimeter, the power supply is keeping a constant and correct voltage",
"fan is measured to be constant. The current, on the other hand, correlates",
"receives power as long as the machine is turned on. The printer is",
"measurements with a multimeter, the power supply is keeping a constant and correct",
"[3D printer hotend cooling fan noise](https://soundcloud.com/user-769347820/3d-printer-hotend-cooling-fan-noise/s-OizCr) Note that I am not talking about",
"I suspect the issue is somewhere on the RAMPS board. I am worried",
"plugging it back in does not lead to the startup noise appearing again.",
"multiple minutes before reconnecting does it happen again. The voltage to the fan",
"that it continuously receives power as long as the machine is turned on.",
"seconds, there is a sudden break. From then on, the fan spins quietly",
"issue is somewhere on the RAMPS board. I am worried about this being",
"and plugging it back in does not lead to the startup noise appearing",
"starts spinning with a lot of noise. It sounds like it is receiving",
"slightly over 12V right from the beginning. Hence, I suspect the issue is",
"the sound: [3D printer hotend cooling fan noise](https://soundcloud.com/user-769347820/3d-printer-hotend-cooling-fan-noise/s-OizCr) Note that I am not",
"cause and is there more to worry about? You can listen to a",
"at 110 - 115 mA. When the fan is quiet, it is at",
"cooling the extruded plastic, but the one sitting on the extruder heatsink. ---",
"is somewhere on the RAMPS board. I am worried about this being more",
"1.4 board. The hotend cooling fan is connected to the 12V-AUX pin (the",
"more than a problem of unpleasant noisiness. What could be the cause and",
"higher amount of current than it should. Moreover, the noise is not steady,",
"seconds, it gets slightly quieter; after about 40-50 seconds, there is a sudden",
"back in does not lead to the startup noise appearing again. Only when",
"constant. The current, on the other hand, correlates with the sounds heard. It",
"stepper driver) on the RAMPS board so that it continuously receives power as",
"it continuously receives power as long as the machine is turned on. The",
"From then on, the fan spins quietly and regularly. According to measurements with",
"a problem of unpleasant noisiness. What could be the cause and is there",
"is turned on. The printer is controlled by the Marlin firmware. When I",
"a fan for cooling the extruded plastic, but the one sitting on the",
"driver) on the RAMPS board so that it continuously receives power as long",
"on. The printer is controlled by the Marlin firmware. When I give power",
"The printer is controlled by the Marlin firmware. When I give power to",
"with a lot of noise. It sounds like it is receiving a higher",
"Mega 2560 replica and a RAMPS 1.4 board. The hotend cooling fan is",
"I am not talking about a fan for cooling the extruded plastic, but",
"unplugging the power supply) and plugging it back in does not lead to",
"Only when waiting for multiple minutes before reconnecting does it happen again. The",
"What could be the cause and is there more to worry about? You",
"to be constant. The current, on the other hand, correlates with the sounds",
"RAMPS board so that it continuously receives power as long as the machine",
"a sudden break. From then on, the fan spins quietly and regularly. According",
"a 3D printer from parts. It is using a standard 12V power supply,",
"fan is connected to the 12V-AUX pin (the one right next to the",
"fluctuates slightly. After about 30 seconds, it gets slightly quieter; after about 40-50",
"there is a sudden break. From then on, the fan spins quietly and",
"the power supply is keeping a constant and correct voltage of slightly over",
"is keeping a constant and correct voltage of slightly over 12V right from",
"the board, the cooling fan starts spinning with a lot of noise. It",
"the cooling fan starts spinning with a lot of noise. It sounds like",
"about 40-50 seconds, there is a sudden break. From then on, the fan",
"plastic, but the one sitting on the extruder heatsink. --- Shutting down the",
"using a standard 12V power supply, an Arduino Mega 2560 replica and a",
"then on, the fan spins quietly and regularly. According to measurements with a",
"about this being more than a problem of unpleasant noisiness. What could be",
"as the machine is turned on. The printer is controlled by the Marlin",
"(even literally unplugging the power supply) and plugging it back in does not",
"on the RAMPS board. I am worried about this being more than a",
"appearing again. Only when waiting for multiple minutes before reconnecting does it happen",
"standard 12V power supply, an Arduino Mega 2560 replica and a RAMPS 1.4",
"voltage to the fan is measured to be constant. The current, on the",
"is a sudden break. From then on, the fan spins quietly and regularly.",
"noise](https://soundcloud.com/user-769347820/3d-printer-hotend-cooling-fan-noise/s-OizCr) Note that I am not talking about a fan for cooling the",
"a higher amount of current than it should. Moreover, the noise is not",
"supply) and plugging it back in does not lead to the startup noise",
"of noise. It sounds like it is receiving a higher amount of current",
"one right next to the x axis stepper driver) on the RAMPS board",
"waiting for multiple minutes before reconnecting does it happen again. The voltage to",
"110 - 115 mA. When the fan is quiet, it is at about",
"12V right from the beginning. Hence, I suspect the issue is somewhere on",
"Moreover, the noise is not steady, but fluctuates slightly. After about 30 seconds,",
"not lead to the startup noise appearing again. Only when waiting for multiple",
"down the printer (even literally unplugging the power supply) and plugging it back",
"somewhere on the RAMPS board. I am worried about this being more than"
] |
[
"Now, the hotend center axis is 11 mm from the carrier plate with",
"move out some distance (ca. 13 mm) to the current Z axis. This",
"with the \"Mk 10\" cooler mounted right onto a pair of 5 mm",
"22 mm, I will have to move out some distance (ca. 13 mm)",
"mm in front of the front left corner. Now, the hotend center axis",
"Home position is about 1 mm left and 2 mm in front of",
"to the 0-positions gained from the limit switches?** According to Repetier Host it",
"on **Marlin 1.0**. Creality offers the firmware on [their website](https://www.creality3d.cn/download/firmware_c0001) as a **.hex**",
"mm left and 2 mm in front of the front left corner. Now,",
"left and 2 mm in front of the front left corner. Now, the",
"1.0**. Creality offers the firmware on [their website](https://www.creality3d.cn/download/firmware_c0001) as a **.hex** file -",
"5 mm pegs that are part of the plate. As I want to",
"got myself the Ender 3. The Home position is about 1 mm left",
"and 2 mm in front of the front left corner. Now, the hotend",
"I reconfigure the Home position to have an offset to the 0-positions gained",
"position is about 1 mm left and 2 mm in front of the",
"The Home position is about 1 mm left and 2 mm in front",
"axis is 11 mm from the carrier plate with the \"Mk 10\" cooler",
"to Repetier Host it runs on **Marlin 1.0**. Creality offers the firmware on",
"of the front left corner. Now, the hotend center axis is 11 mm",
"from the limit switches?** According to Repetier Host it runs on **Marlin 1.0**.",
"have to move out some distance (ca. 13 mm) to the current Z",
"cooler mounted right onto a pair of 5 mm pegs that are part",
"that are part of the plate. As I want to change to an",
"mm, I will have to move out some distance (ca. 13 mm) to",
"of the plate. As I want to change to an e3D v6, which",
"2 mm in front of the front left corner. Now, the hotend center",
"the limit switches?** According to Repetier Host it runs on **Marlin 1.0**. Creality",
"Y command will be off by this distance. **How do I reconfigure the",
"command will be off by this distance. **How do I reconfigure the Home",
"to move out some distance (ca. 13 mm) to the current Z axis.",
"it runs on **Marlin 1.0**. Creality offers the firmware on [their website](https://www.creality3d.cn/download/firmware_c0001) as",
"the carrier plate with the \"Mk 10\" cooler mounted right onto a pair",
"the current Z axis. This means, that any Y command will be off",
"axis. This means, that any Y command will be off by this distance.",
"the front left corner. Now, the hotend center axis is 11 mm from",
"right onto a pair of 5 mm pegs that are part of the",
"mounted right onto a pair of 5 mm pegs that are part of",
"distance. **How do I reconfigure the Home position to have an offset to",
"pair of 5 mm pegs that are part of the plate. As I",
"be off by this distance. **How do I reconfigure the Home position to",
"a diameter of 22 mm, I will have to move out some distance",
"about 1 mm left and 2 mm in front of the front left",
"an offset to the 0-positions gained from the limit switches?** According to Repetier",
"the 0-positions gained from the limit switches?** According to Repetier Host it runs",
"Host it runs on **Marlin 1.0**. Creality offers the firmware on [their website](https://www.creality3d.cn/download/firmware_c0001)",
"I want to change to an e3D v6, which has a diameter of",
"the firmware on [their website](https://www.creality3d.cn/download/firmware_c0001) as a **.hex** file - which is hard",
"**Marlin 1.0**. Creality offers the firmware on [their website](https://www.creality3d.cn/download/firmware_c0001) as a **.hex** file",
"out some distance (ca. 13 mm) to the current Z axis. This means,",
"from the carrier plate with the \"Mk 10\" cooler mounted right onto a",
"Home position to have an offset to the 0-positions gained from the limit",
"3. The Home position is about 1 mm left and 2 mm in",
"a pair of 5 mm pegs that are part of the plate. As",
"to have an offset to the 0-positions gained from the limit switches?** According",
"firmware on [their website](https://www.creality3d.cn/download/firmware_c0001) as a **.hex** file - which is hard to",
"13 mm) to the current Z axis. This means, that any Y command",
"plate. As I want to change to an e3D v6, which has a",
"to change to an e3D v6, which has a diameter of 22 mm,",
"0-positions gained from the limit switches?** According to Repetier Host it runs on",
"I got myself the Ender 3. The Home position is about 1 mm",
"limit switches?** According to Repetier Host it runs on **Marlin 1.0**. Creality offers",
"are part of the plate. As I want to change to an e3D",
"**How do I reconfigure the Home position to have an offset to the",
"any Y command will be off by this distance. **How do I reconfigure",
"will be off by this distance. **How do I reconfigure the Home position",
"to an e3D v6, which has a diameter of 22 mm, I will",
"distance (ca. 13 mm) to the current Z axis. This means, that any",
"Repetier Host it runs on **Marlin 1.0**. Creality offers the firmware on [their",
"the hotend center axis is 11 mm from the carrier plate with the",
"center axis is 11 mm from the carrier plate with the \"Mk 10\"",
"10\" cooler mounted right onto a pair of 5 mm pegs that are",
"Z axis. This means, that any Y command will be off by this",
"front of the front left corner. Now, the hotend center axis is 11",
"do I reconfigure the Home position to have an offset to the 0-positions",
"This means, that any Y command will be off by this distance. **How",
"hotend center axis is 11 mm from the carrier plate with the \"Mk",
"has a diameter of 22 mm, I will have to move out some",
"offers the firmware on [their website](https://www.creality3d.cn/download/firmware_c0001) as a **.hex** file - which is",
"that any Y command will be off by this distance. **How do I",
"myself the Ender 3. The Home position is about 1 mm left and",
"left corner. Now, the hotend center axis is 11 mm from the carrier",
"an e3D v6, which has a diameter of 22 mm, I will have",
"plate with the \"Mk 10\" cooler mounted right onto a pair of 5",
"in front of the front left corner. Now, the hotend center axis is",
"on [their website](https://www.creality3d.cn/download/firmware_c0001) as a **.hex** file - which is hard to edit.",
"As I want to change to an e3D v6, which has a diameter",
"to the current Z axis. This means, that any Y command will be",
"\"Mk 10\" cooler mounted right onto a pair of 5 mm pegs that",
"(ca. 13 mm) to the current Z axis. This means, that any Y",
"of 5 mm pegs that are part of the plate. As I want",
"off by this distance. **How do I reconfigure the Home position to have",
"pegs that are part of the plate. As I want to change to",
"will have to move out some distance (ca. 13 mm) to the current",
"According to Repetier Host it runs on **Marlin 1.0**. Creality offers the firmware",
"by this distance. **How do I reconfigure the Home position to have an",
"switches?** According to Repetier Host it runs on **Marlin 1.0**. Creality offers the",
"I will have to move out some distance (ca. 13 mm) to the",
"the Home position to have an offset to the 0-positions gained from the",
"current Z axis. This means, that any Y command will be off by",
"means, that any Y command will be off by this distance. **How do",
"1 mm left and 2 mm in front of the front left corner.",
"e3D v6, which has a diameter of 22 mm, I will have to",
"runs on **Marlin 1.0**. Creality offers the firmware on [their website](https://www.creality3d.cn/download/firmware_c0001) as a",
"diameter of 22 mm, I will have to move out some distance (ca.",
"front left corner. Now, the hotend center axis is 11 mm from the",
"11 mm from the carrier plate with the \"Mk 10\" cooler mounted right",
"Creality offers the firmware on [their website](https://www.creality3d.cn/download/firmware_c0001) as a **.hex** file - which",
"v6, which has a diameter of 22 mm, I will have to move",
"mm from the carrier plate with the \"Mk 10\" cooler mounted right onto",
"have an offset to the 0-positions gained from the limit switches?** According to",
"the \"Mk 10\" cooler mounted right onto a pair of 5 mm pegs",
"the plate. As I want to change to an e3D v6, which has",
"position to have an offset to the 0-positions gained from the limit switches?**",
"mm) to the current Z axis. This means, that any Y command will",
"carrier plate with the \"Mk 10\" cooler mounted right onto a pair of",
"which has a diameter of 22 mm, I will have to move out",
"is about 1 mm left and 2 mm in front of the front",
"is 11 mm from the carrier plate with the \"Mk 10\" cooler mounted",
"change to an e3D v6, which has a diameter of 22 mm, I",
"gained from the limit switches?** According to Repetier Host it runs on **Marlin",
"Ender 3. The Home position is about 1 mm left and 2 mm",
"mm pegs that are part of the plate. As I want to change",
"of 22 mm, I will have to move out some distance (ca. 13",
"the Ender 3. The Home position is about 1 mm left and 2",
"onto a pair of 5 mm pegs that are part of the plate.",
"this distance. **How do I reconfigure the Home position to have an offset",
"corner. Now, the hotend center axis is 11 mm from the carrier plate",
"reconfigure the Home position to have an offset to the 0-positions gained from",
"some distance (ca. 13 mm) to the current Z axis. This means, that",
"want to change to an e3D v6, which has a diameter of 22",
"offset to the 0-positions gained from the limit switches?** According to Repetier Host",
"part of the plate. As I want to change to an e3D v6,"
] |
[
"the comment and works flawlessly. The machine processes this as `G0Y10Z-5` which seems",
"this piece of G-code is valid: ``` G0 (Some comment (Its G0 command))",
"G-code is valid: ``` G0 (Some comment (Its G0 command)) Y10 Z-5 ```",
"if this piece of G-code is valid: ``` G0 (Some comment (Its G0",
"such comment in real CNC practise. It would be nice if anyone is",
"out on their CNC/3D Printer. Many G-code simulators on the internet fail to",
"me confused. I haven't found anything about it on RepRap Wiki or even",
"their parser so it makes me confused. I haven't found anything about it",
"`G0Y10Z-5` which seems like the correct approach to me. I have however never",
"(Its G0 command)) Y10 Z-5 ``` I have tested this on my Chinese",
"simulators on the internet fail to process such a line in their parser",
"Y10 Z-5 ``` I have tested this on my Chinese CNC machine and",
"is valid: ``` G0 (Some comment (Its G0 command)) Y10 Z-5 ``` I",
"as `G0Y10Z-5` which seems like the correct approach to me. I have however",
"if anyone is able to test it out on their CNC/3D Printer. Many",
"of G-code is valid: ``` G0 (Some comment (Its G0 command)) Y10 Z-5",
"G0 (Some comment (Its G0 command)) Y10 Z-5 ``` I have tested this",
"am wondering if this piece of G-code is valid: ``` G0 (Some comment",
"would be nice if anyone is able to test it out on their",
"my Chinese CNC machine and it strips out the comment and works flawlessly.",
"internet fail to process such a line in their parser so it makes",
"fail to process such a line in their parser so it makes me",
"is able to test it out on their CNC/3D Printer. Many G-code simulators",
"nice if anyone is able to test it out on their CNC/3D Printer.",
"Printer. Many G-code simulators on the internet fail to process such a line",
"seems like the correct approach to me. I have however never seen such",
"tested this on my Chinese CNC machine and it strips out the comment",
"machine processes this as `G0Y10Z-5` which seems like the correct approach to me.",
"in their parser so it makes me confused. I haven't found anything about",
"machine and it strips out the comment and works flawlessly. The machine processes",
"G0 command)) Y10 Z-5 ``` I have tested this on my Chinese CNC",
"have however never seen such comment in real CNC practise. It would be",
"works flawlessly. The machine processes this as `G0Y10Z-5` which seems like the correct",
"piece of G-code is valid: ``` G0 (Some comment (Its G0 command)) Y10",
"anyone is able to test it out on their CNC/3D Printer. Many G-code",
"able to test it out on their CNC/3D Printer. Many G-code simulators on",
"a line in their parser so it makes me confused. I haven't found",
"me. I have however never seen such comment in real CNC practise. It",
"and works flawlessly. The machine processes this as `G0Y10Z-5` which seems like the",
"and it strips out the comment and works flawlessly. The machine processes this",
"comment and works flawlessly. The machine processes this as `G0Y10Z-5` which seems like",
"it strips out the comment and works flawlessly. The machine processes this as",
"line in their parser so it makes me confused. I haven't found anything",
"test it out on their CNC/3D Printer. Many G-code simulators on the internet",
"processes this as `G0Y10Z-5` which seems like the correct approach to me. I",
"in real CNC practise. It would be nice if anyone is able to",
"comment (Its G0 command)) Y10 Z-5 ``` I have tested this on my",
"flawlessly. The machine processes this as `G0Y10Z-5` which seems like the correct approach",
"The machine processes this as `G0Y10Z-5` which seems like the correct approach to",
"strips out the comment and works flawlessly. The machine processes this as `G0Y10Z-5`",
"this on my Chinese CNC machine and it strips out the comment and",
"seen such comment in real CNC practise. It would be nice if anyone",
"I have tested this on my Chinese CNC machine and it strips out",
"such a line in their parser so it makes me confused. I haven't",
"wondering if this piece of G-code is valid: ``` G0 (Some comment (Its",
"out the comment and works flawlessly. The machine processes this as `G0Y10Z-5` which",
"on their CNC/3D Printer. Many G-code simulators on the internet fail to process",
"confused. I haven't found anything about it on RepRap Wiki or even Google.",
"to me. I have however never seen such comment in real CNC practise.",
"Many G-code simulators on the internet fail to process such a line in",
"parser so it makes me confused. I haven't found anything about it on",
"Chinese CNC machine and it strips out the comment and works flawlessly. The",
"so it makes me confused. I haven't found anything about it on RepRap",
"valid: ``` G0 (Some comment (Its G0 command)) Y10 Z-5 ``` I have",
"to process such a line in their parser so it makes me confused.",
"correct approach to me. I have however never seen such comment in real",
"to test it out on their CNC/3D Printer. Many G-code simulators on the",
"``` G0 (Some comment (Its G0 command)) Y10 Z-5 ``` I have tested",
"G-code simulators on the internet fail to process such a line in their",
"never seen such comment in real CNC practise. It would be nice if",
"on the internet fail to process such a line in their parser so",
"command)) Y10 Z-5 ``` I have tested this on my Chinese CNC machine",
"I am wondering if this piece of G-code is valid: ``` G0 (Some",
"practise. It would be nice if anyone is able to test it out",
"process such a line in their parser so it makes me confused. I",
"on my Chinese CNC machine and it strips out the comment and works",
"be nice if anyone is able to test it out on their CNC/3D",
"like the correct approach to me. I have however never seen such comment",
"(Some comment (Its G0 command)) Y10 Z-5 ``` I have tested this on",
"CNC practise. It would be nice if anyone is able to test it",
"the internet fail to process such a line in their parser so it",
"CNC machine and it strips out the comment and works flawlessly. The machine",
"it out on their CNC/3D Printer. Many G-code simulators on the internet fail",
"CNC/3D Printer. Many G-code simulators on the internet fail to process such a",
"makes me confused. I haven't found anything about it on RepRap Wiki or",
"their CNC/3D Printer. Many G-code simulators on the internet fail to process such",
"It would be nice if anyone is able to test it out on",
"this as `G0Y10Z-5` which seems like the correct approach to me. I have",
"have tested this on my Chinese CNC machine and it strips out the",
"``` I have tested this on my Chinese CNC machine and it strips",
"real CNC practise. It would be nice if anyone is able to test",
"Z-5 ``` I have tested this on my Chinese CNC machine and it",
"which seems like the correct approach to me. I have however never seen",
"it makes me confused. I haven't found anything about it on RepRap Wiki",
"the correct approach to me. I have however never seen such comment in",
"approach to me. I have however never seen such comment in real CNC",
"comment in real CNC practise. It would be nice if anyone is able",
"I have however never seen such comment in real CNC practise. It would",
"however never seen such comment in real CNC practise. It would be nice"
] |
[
"scratch in a software that is way more user friendly, deterministic, simpler, etc.",
"an example, but god answers should not be limited to Thingiverse, nor my",
"is way more user friendly, deterministic, simpler, etc. And then I **do** redesign",
"remix it? I'm looking for some canonical guidelines to refer to for the",
"god answers should not be limited to Thingiverse, nor my specific example. I",
"if any restrictions from the original model's licensing might affect me when I",
"on Thingiverse, and if any restrictions from the original model's licensing might affect",
"awesomest thing evar! Several hours later, I realized that I could have designed",
"it. From scratch. Maybe taking a measurement or two from the thing, or",
"the thing. And I refine it, and it turns out better than the",
"NEED THIS IN MY LIFE. I download it, print it, and for whatever",
"I make a new thing? Did I only draw inspiration from the previous",
"Thingiverse's terminology, did I remix it? I'm looking for some canonical guidelines to",
"most awesomest thing evar! Several hours later, I realized that I could have",
"work quite right. OK, no big deal, I'll just download the source because",
"specific example. I ran into this issue while trying to print out a",
"my specific example. I ran into this issue while trying to print out",
"did I remix it? I'm looking for some canonical guidelines to refer to",
"just download the source because the maker was so kind, modify it ever",
"**do** redesign it. From scratch. Maybe taking a measurement or two from the",
"it turns out better than the original was. Did I make a new",
"a derivative work? Using Thingiverse's terminology, did I remix it? I'm looking for",
"to Thingiverse, nor my specific example. I ran into this issue while trying",
"a software that is way more user friendly, deterministic, simpler, etc. And then",
"from the original model's licensing might affect me when I post my thing.",
"I ran into this issue while trying to print out a case for",
"how I could share it on Thingiverse, and if any restrictions from the",
"this issue while trying to print out a case for a Raspberry Pi",
"could share it on Thingiverse, and if any restrictions from the original model's",
"inspiration from the previous thing? Did I make a derivative work? Using Thingiverse's",
"Did I only draw inspiration from the previous thing? Did I make a",
"wondering how I could share it on Thingiverse, and if any restrictions from",
"Maybe taking a measurement or two from the thing, or something related to",
"some canonical guidelines to refer to for the US. Thingiverse can be an",
"Several hours later, I realized that I could have designed it from scratch",
"case for a Raspberry Pi Zero. I'm not done redesigning it, but I've",
"turns out better than the original was. Did I make a new thing?",
"it from scratch in a software that is way more user friendly, deterministic,",
"I make a derivative work? Using Thingiverse's terminology, did I remix it? I'm",
"maker was so kind, modify it ever so slightly, and I will have",
"for whatever reason, it doesn't work quite right. OK, no big deal, I'll",
"right. OK, no big deal, I'll just download the source because the maker",
"print it, and for whatever reason, it doesn't work quite right. OK, no",
"then I **do** redesign it. From scratch. Maybe taking a measurement or two",
"thing? Did I make a derivative work? Using Thingiverse's terminology, did I remix",
"something related to the thing. And I refine it, and it turns out",
"it? I'm looking for some canonical guidelines to refer to for the US.",
"because the maker was so kind, modify it ever so slightly, and I",
"have the most awesomest thing evar! Several hours later, I realized that I",
"for some canonical guidelines to refer to for the US. Thingiverse can be",
"reason, it doesn't work quite right. OK, no big deal, I'll just download",
"limited to Thingiverse, nor my specific example. I ran into this issue while",
"I refine it, and it turns out better than the original was. Did",
"source because the maker was so kind, modify it ever so slightly, and",
"IN MY LIFE. I download it, print it, and for whatever reason, it",
"more user friendly, deterministic, simpler, etc. And then I **do** redesign it. From",
"US. Thingiverse can be an example, but god answers should not be limited",
"Using Thingiverse's terminology, did I remix it? I'm looking for some canonical guidelines",
"so slightly, and I will have the most awesomest thing evar! Several hours",
"trying to print out a case for a Raspberry Pi Zero. I'm not",
"two from the thing, or something related to the thing. And I refine",
"not done redesigning it, but I've been wondering how I could share it",
"so kind, modify it ever so slightly, and I will have the most",
"I find the awesomest thing. I NEED THIS IN MY LIFE. I download",
"a measurement or two from the thing, or something related to the thing.",
"measurement or two from the thing, or something related to the thing. And",
"refer to for the US. Thingiverse can be an example, but god answers",
"and I will have the most awesomest thing evar! Several hours later, I",
"looking for some canonical guidelines to refer to for the US. Thingiverse can",
"redesign it. From scratch. Maybe taking a measurement or two from the thing,",
"I NEED THIS IN MY LIFE. I download it, print it, and for",
"while trying to print out a case for a Raspberry Pi Zero. I'm",
"Zero. I'm not done redesigning it, but I've been wondering how I could",
"only draw inspiration from the previous thing? Did I make a derivative work?",
"Did I make a derivative work? Using Thingiverse's terminology, did I remix it?",
"I download it, print it, and for whatever reason, it doesn't work quite",
"I **do** redesign it. From scratch. Maybe taking a measurement or two from",
"big deal, I'll just download the source because the maker was so kind,",
"quite right. OK, no big deal, I'll just download the source because the",
"taking a measurement or two from the thing, or something related to the",
"should not be limited to Thingiverse, nor my specific example. I ran into",
"example, but god answers should not be limited to Thingiverse, nor my specific",
"be limited to Thingiverse, nor my specific example. I ran into this issue",
"the maker was so kind, modify it ever so slightly, and I will",
"simpler, etc. And then I **do** redesign it. From scratch. Maybe taking a",
"friendly, deterministic, simpler, etc. And then I **do** redesign it. From scratch. Maybe",
"THIS IN MY LIFE. I download it, print it, and for whatever reason,",
"I'll just download the source because the maker was so kind, modify it",
"from the previous thing? Did I make a derivative work? Using Thingiverse's terminology,",
"Thingiverse, and if any restrictions from the original model's licensing might affect me",
"thing, or something related to the thing. And I refine it, and it",
"awesomest thing. I NEED THIS IN MY LIFE. I download it, print it,",
"hours later, I realized that I could have designed it from scratch in",
"make a new thing? Did I only draw inspiration from the previous thing?",
"restrictions from the original model's licensing might affect me when I post my",
"or something related to the thing. And I refine it, and it turns",
"it doesn't work quite right. OK, no big deal, I'll just download the",
"work? Using Thingiverse's terminology, did I remix it? I'm looking for some canonical",
"for the US. Thingiverse can be an example, but god answers should not",
"to the thing. And I refine it, and it turns out better than",
"user friendly, deterministic, simpler, etc. And then I **do** redesign it. From scratch.",
"it, print it, and for whatever reason, it doesn't work quite right. OK,",
"download it, print it, and for whatever reason, it doesn't work quite right.",
"deterministic, simpler, etc. And then I **do** redesign it. From scratch. Maybe taking",
"original was. Did I make a new thing? Did I only draw inspiration",
"nor my specific example. I ran into this issue while trying to print",
"a Raspberry Pi Zero. I'm not done redesigning it, but I've been wondering",
"I realized that I could have designed it from scratch in a software",
"And then I **do** redesign it. From scratch. Maybe taking a measurement or",
"could have designed it from scratch in a software that is way more",
"make a derivative work? Using Thingiverse's terminology, did I remix it? I'm looking",
"ran into this issue while trying to print out a case for a",
"way more user friendly, deterministic, simpler, etc. And then I **do** redesign it.",
"from scratch in a software that is way more user friendly, deterministic, simpler,",
"was so kind, modify it ever so slightly, and I will have the",
"I've been wondering how I could share it on Thingiverse, and if any",
"And I refine it, and it turns out better than the original was.",
"related to the thing. And I refine it, and it turns out better",
"From scratch. Maybe taking a measurement or two from the thing, or something",
"Did I make a new thing? Did I only draw inspiration from the",
"the previous thing? Did I make a derivative work? Using Thingiverse's terminology, did",
"Thingiverse, nor my specific example. I ran into this issue while trying to",
"been wondering how I could share it on Thingiverse, and if any restrictions",
"the awesomest thing. I NEED THIS IN MY LIFE. I download it, print",
"I could share it on Thingiverse, and if any restrictions from the original",
"can be an example, but god answers should not be limited to Thingiverse,",
"modify it ever so slightly, and I will have the most awesomest thing",
"new thing? Did I only draw inspiration from the previous thing? Did I",
"previous thing? Did I make a derivative work? Using Thingiverse's terminology, did I",
"for a Raspberry Pi Zero. I'm not done redesigning it, but I've been",
"that I could have designed it from scratch in a software that is",
"or two from the thing, or something related to the thing. And I",
"out better than the original was. Did I make a new thing? Did",
"will have the most awesomest thing evar! Several hours later, I realized that",
"answers should not be limited to Thingiverse, nor my specific example. I ran",
"whatever reason, it doesn't work quite right. OK, no big deal, I'll just",
"find the awesomest thing. I NEED THIS IN MY LIFE. I download it,",
"evar! Several hours later, I realized that I could have designed it from",
"redesigning it, but I've been wondering how I could share it on Thingiverse,",
"it on Thingiverse, and if any restrictions from the original model's licensing might",
"I only draw inspiration from the previous thing? Did I make a derivative",
"and I find the awesomest thing. I NEED THIS IN MY LIFE. I",
"the source because the maker was so kind, modify it ever so slightly,",
"from the thing, or something related to the thing. And I refine it,",
"the original was. Did I make a new thing? Did I only draw",
"into this issue while trying to print out a case for a Raspberry",
"thing? Did I only draw inspiration from the previous thing? Did I make",
"canonical guidelines to refer to for the US. Thingiverse can be an example,",
"to refer to for the US. Thingiverse can be an example, but god",
"out a case for a Raspberry Pi Zero. I'm not done redesigning it,",
"have designed it from scratch in a software that is way more user",
"and for whatever reason, it doesn't work quite right. OK, no big deal,",
"it, and for whatever reason, it doesn't work quite right. OK, no big",
"realized that I could have designed it from scratch in a software that",
"I remix it? I'm looking for some canonical guidelines to refer to for",
"I'm not done redesigning it, but I've been wondering how I could share",
"no big deal, I'll just download the source because the maker was so",
"and it turns out better than the original was. Did I make a",
"I'm cruising [Thingiverse](https://www.thingiverse.com/), and I find the awesomest thing. I NEED THIS IN",
"that is way more user friendly, deterministic, simpler, etc. And then I **do**",
"deal, I'll just download the source because the maker was so kind, modify",
"thing. And I refine it, and it turns out better than the original",
"to print out a case for a Raspberry Pi Zero. I'm not done",
"in a software that is way more user friendly, deterministic, simpler, etc. And",
"etc. And then I **do** redesign it. From scratch. Maybe taking a measurement",
"I will have the most awesomest thing evar! Several hours later, I realized",
"guidelines to refer to for the US. Thingiverse can be an example, but",
"download the source because the maker was so kind, modify it ever so",
"than the original was. Did I make a new thing? Did I only",
"derivative work? Using Thingiverse's terminology, did I remix it? I'm looking for some",
"terminology, did I remix it? I'm looking for some canonical guidelines to refer",
"kind, modify it ever so slightly, and I will have the most awesomest",
"refine it, and it turns out better than the original was. Did I",
"to for the US. Thingiverse can be an example, but god answers should",
"draw inspiration from the previous thing? Did I make a derivative work? Using",
"ever so slightly, and I will have the most awesomest thing evar! Several",
"the US. Thingiverse can be an example, but god answers should not be",
"be an example, but god answers should not be limited to Thingiverse, nor",
"later, I realized that I could have designed it from scratch in a",
"thing evar! Several hours later, I realized that I could have designed it",
"share it on Thingiverse, and if any restrictions from the original model's licensing",
"doesn't work quite right. OK, no big deal, I'll just download the source",
"software that is way more user friendly, deterministic, simpler, etc. And then I",
"I could have designed it from scratch in a software that is way",
"the most awesomest thing evar! Several hours later, I realized that I could",
"was. Did I make a new thing? Did I only draw inspiration from",
"Raspberry Pi Zero. I'm not done redesigning it, but I've been wondering how",
"it, and it turns out better than the original was. Did I make",
"issue while trying to print out a case for a Raspberry Pi Zero.",
"but god answers should not be limited to Thingiverse, nor my specific example.",
"it ever so slightly, and I will have the most awesomest thing evar!",
"a new thing? Did I only draw inspiration from the previous thing? Did",
"done redesigning it, but I've been wondering how I could share it on",
"and if any restrictions from the original model's licensing might affect me when",
"it, but I've been wondering how I could share it on Thingiverse, and",
"but I've been wondering how I could share it on Thingiverse, and if",
"LIFE. I download it, print it, and for whatever reason, it doesn't work",
"thing. I NEED THIS IN MY LIFE. I download it, print it, and",
"OK, no big deal, I'll just download the source because the maker was",
"slightly, and I will have the most awesomest thing evar! Several hours later,",
"designed it from scratch in a software that is way more user friendly,",
"scratch. Maybe taking a measurement or two from the thing, or something related",
"better than the original was. Did I make a new thing? Did I",
"any restrictions from the original model's licensing might affect me when I post",
"example. I ran into this issue while trying to print out a case",
"not be limited to Thingiverse, nor my specific example. I ran into this",
"Pi Zero. I'm not done redesigning it, but I've been wondering how I",
"I'm looking for some canonical guidelines to refer to for the US. Thingiverse",
"print out a case for a Raspberry Pi Zero. I'm not done redesigning",
"MY LIFE. I download it, print it, and for whatever reason, it doesn't",
"[Thingiverse](https://www.thingiverse.com/), and I find the awesomest thing. I NEED THIS IN MY LIFE.",
"Scenario: I'm cruising [Thingiverse](https://www.thingiverse.com/), and I find the awesomest thing. I NEED THIS",
"the thing, or something related to the thing. And I refine it, and",
"cruising [Thingiverse](https://www.thingiverse.com/), and I find the awesomest thing. I NEED THIS IN MY",
"Thingiverse can be an example, but god answers should not be limited to",
"a case for a Raspberry Pi Zero. I'm not done redesigning it, but"
] |
[
"drop down and form don't work correctly if you select \"I don't want",
"and form don't work correctly if you select \"I don't want to share",
"noticed that my version of Ultimaker Cura was out of date, so I",
"security extensions. Where are reputable mirrors for Cura? Download.Cnet.com and Sourceforge [came up",
"to go to [their website](https://ultimaker.com) and download a new version. For whatever reason,",
"in Firefox with a slew of security extensions. Where are reputable mirrors for",
"Where are reputable mirrors for Cura? Download.Cnet.com and Sourceforge [came up as sources](https://duckduckgo.com/?q=download%20cura&t=ffsb&ia=web),",
"so I tried to go to [their website](https://ultimaker.com) and download a new version.",
"even remotely reputable in the search results. I did some analysis, and it",
"[came up as sources](https://duckduckgo.com/?q=download%20cura&t=ffsb&ia=web), but years ago they both [went to the darkside](http://insecure.org/news/download-com-fiasco.html)",
"extensions. Where are reputable mirrors for Cura? Download.Cnet.com and Sourceforge [came up as",
"I did some analysis, and it appears that the drop down and form",
"[their website](https://ultimaker.com) and download a new version. For whatever reason, I could not",
"of date, so I tried to go to [their website](https://ultimaker.com) and download a",
"download a new version. For whatever reason, I could not get the [download",
"I could not get the [download link](https://ultimaker.com/en/products/ultimaker-cura-software/download-request/191) to work properly in Firefox with",
"could not get the [download link](https://ultimaker.com/en/products/ultimaker-cura-software/download-request/191) to work properly in Firefox with a",
"as sources](https://duckduckgo.com/?q=download%20cura&t=ffsb&ia=web), but years ago they both [went to the darkside](http://insecure.org/news/download-com-fiasco.html) (SourceForge: [HowToGeek](https://www.howtogeek.com/218764/warning-don%E2%80%99t-download-software-from-sourceforge-if-you-can-help-it/),",
"I noticed that my version of Ultimaker Cura was out of date, so",
"out of date, so I tried to go to [their website](https://ultimaker.com) and download",
"select \"I don't want to share any personal information\", leading me to think",
"that looks even remotely reputable in the search results. I did some analysis,",
"else that looks even remotely reputable in the search results. I did some",
"reputable mirrors for Cura? Download.Cnet.com and Sourceforge [came up as sources](https://duckduckgo.com/?q=download%20cura&t=ffsb&ia=web), but years",
"Cura? Download.Cnet.com and Sourceforge [came up as sources](https://duckduckgo.com/?q=download%20cura&t=ffsb&ia=web), but years ago they both",
"properly in Firefox with a slew of security extensions. Where are reputable mirrors",
"a slew of security extensions. Where are reputable mirrors for Cura? Download.Cnet.com and",
"but years ago they both [went to the darkside](http://insecure.org/news/download-com-fiasco.html) (SourceForge: [HowToGeek](https://www.howtogeek.com/218764/warning-don%E2%80%99t-download-software-from-sourceforge-if-you-can-help-it/), [thecomputerpeeps](https://thecomputerpeeps.com/2013/08/sourceforge-malware/)). I",
"[download link](https://ultimaker.com/en/products/ultimaker-cura-software/download-request/191) to work properly in Firefox with a slew of security extensions.",
"I tried to go to [their website](https://ultimaker.com) and download a new version. For",
"and download a new version. For whatever reason, I could not get the",
"it appears that the drop down and form don't work correctly if you",
"form don't work correctly if you select \"I don't want to share any",
"Firefox with a slew of security extensions. Where are reputable mirrors for Cura?",
"you select \"I don't want to share any personal information\", leading me to",
"to share any personal information\", leading me to think this is web page",
"was out of date, so I tried to go to [their website](https://ultimaker.com) and",
"go to [their website](https://ultimaker.com) and download a new version. For whatever reason, I",
"down and form don't work correctly if you select \"I don't want to",
"don't work correctly if you select \"I don't want to share any personal",
"don't want to share any personal information\", leading me to think this is",
"the darkside](http://insecure.org/news/download-com-fiasco.html) (SourceForge: [HowToGeek](https://www.howtogeek.com/218764/warning-don%E2%80%99t-download-software-from-sourceforge-if-you-can-help-it/), [thecomputerpeeps](https://thecomputerpeeps.com/2013/08/sourceforge-malware/)). I don't see anything else that looks even",
"results. I did some analysis, and it appears that the drop down and",
"are reputable mirrors for Cura? Download.Cnet.com and Sourceforge [came up as sources](https://duckduckgo.com/?q=download%20cura&t=ffsb&ia=web), but",
"get the [download link](https://ultimaker.com/en/products/ultimaker-cura-software/download-request/191) to work properly in Firefox with a slew of",
"version. For whatever reason, I could not get the [download link](https://ultimaker.com/en/products/ultimaker-cura-software/download-request/191) to work",
"slew of security extensions. Where are reputable mirrors for Cura? Download.Cnet.com and Sourceforge",
"and Sourceforge [came up as sources](https://duckduckgo.com/?q=download%20cura&t=ffsb&ia=web), but years ago they both [went to",
"that my version of Ultimaker Cura was out of date, so I tried",
"of Ultimaker Cura was out of date, so I tried to go to",
"search results. I did some analysis, and it appears that the drop down",
"appears that the drop down and form don't work correctly if you select",
"anything else that looks even remotely reputable in the search results. I did",
"the search results. I did some analysis, and it appears that the drop",
"the [download link](https://ultimaker.com/en/products/ultimaker-cura-software/download-request/191) to work properly in Firefox with a slew of security",
"some analysis, and it appears that the drop down and form don't work",
"don't see anything else that looks even remotely reputable in the search results.",
"[thecomputerpeeps](https://thecomputerpeeps.com/2013/08/sourceforge-malware/)). I don't see anything else that looks even remotely reputable in the",
"darkside](http://insecure.org/news/download-com-fiasco.html) (SourceForge: [HowToGeek](https://www.howtogeek.com/218764/warning-don%E2%80%99t-download-software-from-sourceforge-if-you-can-help-it/), [thecomputerpeeps](https://thecomputerpeeps.com/2013/08/sourceforge-malware/)). I don't see anything else that looks even remotely",
"analysis, and it appears that the drop down and form don't work correctly",
"reputable in the search results. I did some analysis, and it appears that",
"date, so I tried to go to [their website](https://ultimaker.com) and download a new",
"did some analysis, and it appears that the drop down and form don't",
"Sourceforge [came up as sources](https://duckduckgo.com/?q=download%20cura&t=ffsb&ia=web), but years ago they both [went to the",
"in the search results. I did some analysis, and it appears that the",
"not get the [download link](https://ultimaker.com/en/products/ultimaker-cura-software/download-request/191) to work properly in Firefox with a slew",
"they both [went to the darkside](http://insecure.org/news/download-com-fiasco.html) (SourceForge: [HowToGeek](https://www.howtogeek.com/218764/warning-don%E2%80%99t-download-software-from-sourceforge-if-you-can-help-it/), [thecomputerpeeps](https://thecomputerpeeps.com/2013/08/sourceforge-malware/)). I don't see anything",
"with a slew of security extensions. Where are reputable mirrors for Cura? Download.Cnet.com",
"For whatever reason, I could not get the [download link](https://ultimaker.com/en/products/ultimaker-cura-software/download-request/191) to work properly",
"reason, I could not get the [download link](https://ultimaker.com/en/products/ultimaker-cura-software/download-request/191) to work properly in Firefox",
"looks even remotely reputable in the search results. I did some analysis, and",
"tried to go to [their website](https://ultimaker.com) and download a new version. For whatever",
"both [went to the darkside](http://insecure.org/news/download-com-fiasco.html) (SourceForge: [HowToGeek](https://www.howtogeek.com/218764/warning-don%E2%80%99t-download-software-from-sourceforge-if-you-can-help-it/), [thecomputerpeeps](https://thecomputerpeeps.com/2013/08/sourceforge-malware/)). I don't see anything else",
"work correctly if you select \"I don't want to share any personal information\",",
"for Cura? Download.Cnet.com and Sourceforge [came up as sources](https://duckduckgo.com/?q=download%20cura&t=ffsb&ia=web), but years ago they",
"Ultimaker Cura was out of date, so I tried to go to [their",
"to the darkside](http://insecure.org/news/download-com-fiasco.html) (SourceForge: [HowToGeek](https://www.howtogeek.com/218764/warning-don%E2%80%99t-download-software-from-sourceforge-if-you-can-help-it/), [thecomputerpeeps](https://thecomputerpeeps.com/2013/08/sourceforge-malware/)). I don't see anything else that looks",
"whatever reason, I could not get the [download link](https://ultimaker.com/en/products/ultimaker-cura-software/download-request/191) to work properly in",
"I don't see anything else that looks even remotely reputable in the search",
"years ago they both [went to the darkside](http://insecure.org/news/download-com-fiasco.html) (SourceForge: [HowToGeek](https://www.howtogeek.com/218764/warning-don%E2%80%99t-download-software-from-sourceforge-if-you-can-help-it/), [thecomputerpeeps](https://thecomputerpeeps.com/2013/08/sourceforge-malware/)). I don't",
"(SourceForge: [HowToGeek](https://www.howtogeek.com/218764/warning-don%E2%80%99t-download-software-from-sourceforge-if-you-can-help-it/), [thecomputerpeeps](https://thecomputerpeeps.com/2013/08/sourceforge-malware/)). I don't see anything else that looks even remotely reputable",
"my version of Ultimaker Cura was out of date, so I tried to",
"share any personal information\", leading me to think this is web page bug.",
"up as sources](https://duckduckgo.com/?q=download%20cura&t=ffsb&ia=web), but years ago they both [went to the darkside](http://insecure.org/news/download-com-fiasco.html) (SourceForge:",
"correctly if you select \"I don't want to share any personal information\", leading",
"see anything else that looks even remotely reputable in the search results. I",
"sources](https://duckduckgo.com/?q=download%20cura&t=ffsb&ia=web), but years ago they both [went to the darkside](http://insecure.org/news/download-com-fiasco.html) (SourceForge: [HowToGeek](https://www.howtogeek.com/218764/warning-don%E2%80%99t-download-software-from-sourceforge-if-you-can-help-it/), [thecomputerpeeps](https://thecomputerpeeps.com/2013/08/sourceforge-malware/)).",
"of security extensions. Where are reputable mirrors for Cura? Download.Cnet.com and Sourceforge [came",
"and it appears that the drop down and form don't work correctly if",
"mirrors for Cura? Download.Cnet.com and Sourceforge [came up as sources](https://duckduckgo.com/?q=download%20cura&t=ffsb&ia=web), but years ago",
"the drop down and form don't work correctly if you select \"I don't",
"version of Ultimaker Cura was out of date, so I tried to go",
"ago they both [went to the darkside](http://insecure.org/news/download-com-fiasco.html) (SourceForge: [HowToGeek](https://www.howtogeek.com/218764/warning-don%E2%80%99t-download-software-from-sourceforge-if-you-can-help-it/), [thecomputerpeeps](https://thecomputerpeeps.com/2013/08/sourceforge-malware/)). I don't see",
"\"I don't want to share any personal information\", leading me to think this",
"Cura was out of date, so I tried to go to [their website](https://ultimaker.com)",
"website](https://ultimaker.com) and download a new version. For whatever reason, I could not get",
"want to share any personal information\", leading me to think this is web",
"to work properly in Firefox with a slew of security extensions. Where are",
"remotely reputable in the search results. I did some analysis, and it appears",
"[went to the darkside](http://insecure.org/news/download-com-fiasco.html) (SourceForge: [HowToGeek](https://www.howtogeek.com/218764/warning-don%E2%80%99t-download-software-from-sourceforge-if-you-can-help-it/), [thecomputerpeeps](https://thecomputerpeeps.com/2013/08/sourceforge-malware/)). I don't see anything else that",
"Download.Cnet.com and Sourceforge [came up as sources](https://duckduckgo.com/?q=download%20cura&t=ffsb&ia=web), but years ago they both [went",
"link](https://ultimaker.com/en/products/ultimaker-cura-software/download-request/191) to work properly in Firefox with a slew of security extensions. Where",
"a new version. For whatever reason, I could not get the [download link](https://ultimaker.com/en/products/ultimaker-cura-software/download-request/191)",
"to [their website](https://ultimaker.com) and download a new version. For whatever reason, I could",
"[HowToGeek](https://www.howtogeek.com/218764/warning-don%E2%80%99t-download-software-from-sourceforge-if-you-can-help-it/), [thecomputerpeeps](https://thecomputerpeeps.com/2013/08/sourceforge-malware/)). I don't see anything else that looks even remotely reputable in",
"work properly in Firefox with a slew of security extensions. Where are reputable",
"that the drop down and form don't work correctly if you select \"I",
"new version. For whatever reason, I could not get the [download link](https://ultimaker.com/en/products/ultimaker-cura-software/download-request/191) to",
"if you select \"I don't want to share any personal information\", leading me"
] |
[
"didn't function), + RepRapGuru\\_Marlin\\_v4, + RepRapGuru\\_Marlin\\_v2 Additional information: * My power supply is",
"a little Hardware: * RepRap Guru DIY Prusa i3 V2 3D Printer Kit",
"A4988 Driver * Firmware: + Marin 1.1.8, - 1.1.7 (screen didn't function), -",
"rod riders to near atomic perfection. * Changed firmware to each of the",
"It doesn't matter if the bed and nozzle heating or not, if it's",
"The bed measures 11.50 V and the hotend is 3.4 V * While",
"connections * Cleaned threaded rod. * Leveled two Z-Axis threaded rod riders to",
"atomic perfection. * Changed firmware to each of the 3 latest updates *",
"LCD screen and rotary encoder to move my axes. It works as expected",
"information: * My power supply is the original 12 V 360 W supply",
"Hardware: * RepRap Guru DIY Prusa i3 V2 3D Printer Kit * Ramps",
"have: * Changed the Ramps 1.4 board twice * Swapped drivers around, bought",
"But, Z-Axis DOES work while not printing. It doesn't matter if the bed",
"not printing so it isn't the driver pots * Cursed again * Scoured",
"motor so both face same cardinal direction * Cursed * Changed jumper configurations",
"heating or not, if it's not printing, it works as it should. I",
"should. I don't know what else I can do to troubleshoot this problem.",
"V * While heating the bed and hotend I am using the LCD",
"printing so it isn't the driver pots * Cursed again * Scoured the",
"not printing. It doesn't matter if the bed and nozzle heating or not,",
"tridialed and quaddialed the driver pots * Recalled the Z-motors work while not",
"hotend is 3.4 V * While heating the bed and hotend I am",
"and hotend I am using the LCD screen and rotary encoder to move",
"Guru DIY Prusa i3 V2 3D Printer Kit * Ramps 1.4 * A4988",
"bed and nozzle heating or not, if it's not printing, it works as",
"original PCB. * Currently getting Repetier. Will update. * The z-axis leadscrew is",
"(screen didn't function), - 1.1.6 (screen didn't function), + RepRapGuru\\_Marlin\\_v4, + RepRapGuru\\_Marlin\\_v2 Additional",
"the 11 amp power port is 11.96 V and 12.18 V depending on",
"climbs on the Z-Axis, but screws back down. It whines, too. But, Z-Axis",
"original 12 V 360 W supply with the kit. + The 5 amp",
"I have: * Changed the Ramps 1.4 board twice * Swapped drivers around,",
"Cursed * Changed jumper configurations from 16th microstepper to 8th for more power.",
"8th for more power. No dice. Fried two drivers that way. * Dialed",
"as it should. I don't know what else I can do to troubleshoot",
"the original 12 V 360 W supply with the kit. + The 5",
"aluminum 12/24 V hotbed from the original PCB. * Currently getting Repetier. Will",
"V and 12.18 V depending on which heater is on. + The bed",
"the driver pots * Cursed again * Scoured the web for similar issues",
"heater is on. + The bed measures 11.50 V and the hotend is",
"G-code that might limit Z-Axis elevation * Died a little. Just a little",
"don't know what else I can do to troubleshoot this problem. I have:",
"V and the hotend is 3.4 V * While heating the bed and",
"so both face same cardinal direction * Cursed * Changed jumper configurations from",
"print. It attempts to work, maybe climbs on the Z-Axis, but screws back",
"to each of the 3 latest updates * Remounted motor so both face",
"Z-Axis threaded rod riders to near atomic perfection. * Changed firmware to each",
"bed measures 11.50 V and the hotend is 3.4 V * While heating",
"the web for similar issues * Looked for G-code that might limit Z-Axis",
"* Recalled the Z-motors work while not printing so it isn't the driver",
"* Swapped X-Axis and Z-Axis motor connections * Cleaned threaded rod. * Leveled",
"while not printing so it isn't the driver pots * Cursed again *",
"power. No dice. Fried two drivers that way. * Dialed and redial and",
"cardinal direction * Cursed * Changed jumper configurations from 16th microstepper to 8th",
"V hotbed from the original PCB. * Currently getting Repetier. Will update. *",
"Z-Axis motor connections * Cleaned threaded rod. * Leveled two Z-Axis threaded rod",
"didn't function), - 1.1.6 (screen didn't function), + RepRapGuru\\_Marlin\\_v4, + RepRapGuru\\_Marlin\\_v2 Additional information:",
"* A4988 Driver * Firmware: + Marin 1.1.8, - 1.1.7 (screen didn't function),",
"1.1.7 (screen didn't function), - 1.1.6 (screen didn't function), + RepRapGuru\\_Marlin\\_v4, + RepRapGuru\\_Marlin\\_v2",
"* Firmware: + Marin 1.1.8, - 1.1.7 (screen didn't function), - 1.1.6 (screen",
"(screen didn't function), + RepRapGuru\\_Marlin\\_v4, + RepRapGuru\\_Marlin\\_v2 Additional information: * My power supply",
"bought new drivers * Swapped X-Axis and Z-Axis motor connections * Cleaned threaded",
"for G-code that might limit Z-Axis elevation * Died a little. Just a",
"to an aluminum 12/24 V hotbed from the original PCB. * Currently getting",
"+ Marin 1.1.8, - 1.1.7 (screen didn't function), - 1.1.6 (screen didn't function),",
"pots * Recalled the Z-motors work while not printing so it isn't the",
"11.50 V and the hotend is 3.4 V * While heating the bed",
"problem. I have: * Changed the Ramps 1.4 board twice * Swapped drivers",
"on. + The bed measures 11.50 V and the hotend is 3.4 V",
"* Remounted motor so both face same cardinal direction * Cursed * Changed",
"depending on which heater is on. + The bed measures 11.50 V and",
"two drivers that way. * Dialed and redial and tridialed and quaddialed the",
"the kit. + The 5 amp power in is 12.02 V, the 11",
"* Dialed and redial and tridialed and quaddialed the driver pots * Recalled",
"whines, too. But, Z-Axis DOES work while not printing. It doesn't matter if",
"until printing. I have upgraded to an aluminum 12/24 V hotbed from the",
"16th microstepper to 8th for more power. No dice. Fried two drivers that",
"same cardinal direction * Cursed * Changed jumper configurations from 16th microstepper to",
"measures 11.50 V and the hotend is 3.4 V * While heating the",
"the hotend is 3.4 V * While heating the bed and hotend I",
"elevation * Died a little. Just a little Hardware: * RepRap Guru DIY",
"power in is 12.02 V, the 11 amp power port is 11.96 V",
"hotend I am using the LCD screen and rotary encoder to move my",
"I am using the LCD screen and rotary encoder to move my axes.",
"have upgraded to an aluminum 12/24 V hotbed from the original PCB. *",
"in is 12.02 V, the 11 amp power port is 11.96 V and",
"I don't know what else I can do to troubleshoot this problem. I",
"to near atomic perfection. * Changed firmware to each of the 3 latest",
"is 3.4 V * While heating the bed and hotend I am using",
"function), + RepRapGuru\\_Marlin\\_v4, + RepRapGuru\\_Marlin\\_v2 Additional information: * My power supply is the",
"maybe climbs on the Z-Axis, but screws back down. It whines, too. But,",
"the bed and nozzle heating or not, if it's not printing, it works",
"driver pots * Cursed again * Scoured the web for similar issues *",
"for similar issues * Looked for G-code that might limit Z-Axis elevation *",
"heating the bed and hotend I am using the LCD screen and rotary",
"to 8th for more power. No dice. Fried two drivers that way. *",
"both face same cardinal direction * Cursed * Changed jumper configurations from 16th",
"screen and rotary encoder to move my axes. It works as expected until",
"two Z-Axis threaded rod riders to near atomic perfection. * Changed firmware to",
"V depending on which heater is on. + The bed measures 11.50 V",
"matter if the bed and nozzle heating or not, if it's not printing,",
"Dialed and redial and tridialed and quaddialed the driver pots * Recalled the",
"issues * Looked for G-code that might limit Z-Axis elevation * Died a",
"axes. It works as expected until printing. I have upgraded to an aluminum",
"While heating the bed and hotend I am using the LCD screen and",
"i3 V2 3D Printer Kit * Ramps 1.4 * A4988 Driver * Firmware:",
"Printer Kit * Ramps 1.4 * A4988 Driver * Firmware: + Marin 1.1.8,",
"driver pots * Recalled the Z-motors work while not printing so it isn't",
"Cursed again * Scoured the web for similar issues * Looked for G-code",
"the driver pots * Recalled the Z-motors work while not printing so it",
"Problem: Z-Axis doesn't work during a print. It attempts to work, maybe climbs",
"bed and hotend I am using the LCD screen and rotary encoder to",
"drivers * Swapped X-Axis and Z-Axis motor connections * Cleaned threaded rod. *",
"X-Axis and Z-Axis motor connections * Cleaned threaded rod. * Leveled two Z-Axis",
"V2 3D Printer Kit * Ramps 1.4 * A4988 Driver * Firmware: +",
"work while not printing so it isn't the driver pots * Cursed again",
"around, bought new drivers * Swapped X-Axis and Z-Axis motor connections * Cleaned",
"1.4 * A4988 Driver * Firmware: + Marin 1.1.8, - 1.1.7 (screen didn't",
"back down. It whines, too. But, Z-Axis DOES work while not printing. It",
"web for similar issues * Looked for G-code that might limit Z-Axis elevation",
"not printing, it works as it should. I don't know what else I",
"is on. + The bed measures 11.50 V and the hotend is 3.4",
"quaddialed the driver pots * Recalled the Z-motors work while not printing so",
"it's not printing, it works as it should. I don't know what else",
"Scoured the web for similar issues * Looked for G-code that might limit",
"Looked for G-code that might limit Z-Axis elevation * Died a little. Just",
"Z-Axis, but screws back down. It whines, too. But, Z-Axis DOES work while",
"it should. I don't know what else I can do to troubleshoot this",
"to work, maybe climbs on the Z-Axis, but screws back down. It whines,",
"DOES work while not printing. It doesn't matter if the bed and nozzle",
"little. Just a little Hardware: * RepRap Guru DIY Prusa i3 V2 3D",
"11.96 V and 12.18 V depending on which heater is on. + The",
"+ RepRapGuru\\_Marlin\\_v2 Additional information: * My power supply is the original 12 V",
"and quaddialed the driver pots * Recalled the Z-motors work while not printing",
"troubleshoot this problem. I have: * Changed the Ramps 1.4 board twice *",
"pots * Cursed again * Scoured the web for similar issues * Looked",
"* Cursed * Changed jumper configurations from 16th microstepper to 8th for more",
"3.4 V * While heating the bed and hotend I am using the",
"what else I can do to troubleshoot this problem. I have: * Changed",
"face same cardinal direction * Cursed * Changed jumper configurations from 16th microstepper",
"* Looked for G-code that might limit Z-Axis elevation * Died a little.",
"works as expected until printing. I have upgraded to an aluminum 12/24 V",
"it works as it should. I don't know what else I can do",
"Swapped drivers around, bought new drivers * Swapped X-Axis and Z-Axis motor connections",
"my axes. It works as expected until printing. I have upgraded to an",
"that way. * Dialed and redial and tridialed and quaddialed the driver pots",
"this problem. I have: * Changed the Ramps 1.4 board twice * Swapped",
"isn't the driver pots * Cursed again * Scoured the web for similar",
"PCB. * Currently getting Repetier. Will update. * The z-axis leadscrew is M5-0.8",
"or not, if it's not printing, it works as it should. I don't",
"I can do to troubleshoot this problem. I have: * Changed the Ramps",
"rotary encoder to move my axes. It works as expected until printing. I",
"+ The 5 amp power in is 12.02 V, the 11 amp power",
"which heater is on. + The bed measures 11.50 V and the hotend",
"Leveled two Z-Axis threaded rod riders to near atomic perfection. * Changed firmware",
"and tridialed and quaddialed the driver pots * Recalled the Z-motors work while",
"threaded rod. * Leveled two Z-Axis threaded rod riders to near atomic perfection.",
"while not printing. It doesn't matter if the bed and nozzle heating or",
"supply with the kit. + The 5 amp power in is 12.02 V,",
"attempts to work, maybe climbs on the Z-Axis, but screws back down. It",
"on the Z-Axis, but screws back down. It whines, too. But, Z-Axis DOES",
"printing. It doesn't matter if the bed and nozzle heating or not, if",
"* While heating the bed and hotend I am using the LCD screen",
"the Z-motors work while not printing so it isn't the driver pots *",
"way. * Dialed and redial and tridialed and quaddialed the driver pots *",
"as expected until printing. I have upgraded to an aluminum 12/24 V hotbed",
"* Changed the Ramps 1.4 board twice * Swapped drivers around, bought new",
"little Hardware: * RepRap Guru DIY Prusa i3 V2 3D Printer Kit *",
"work during a print. It attempts to work, maybe climbs on the Z-Axis,",
"the 3 latest updates * Remounted motor so both face same cardinal direction",
"new drivers * Swapped X-Axis and Z-Axis motor connections * Cleaned threaded rod.",
"* Swapped drivers around, bought new drivers * Swapped X-Axis and Z-Axis motor",
"11 amp power port is 11.96 V and 12.18 V depending on which",
"know what else I can do to troubleshoot this problem. I have: *",
"1.4 board twice * Swapped drivers around, bought new drivers * Swapped X-Axis",
"drivers that way. * Dialed and redial and tridialed and quaddialed the driver",
"if the bed and nozzle heating or not, if it's not printing, it",
"do to troubleshoot this problem. I have: * Changed the Ramps 1.4 board",
"jumper configurations from 16th microstepper to 8th for more power. No dice. Fried",
"but screws back down. It whines, too. But, Z-Axis DOES work while not",
"dice. Fried two drivers that way. * Dialed and redial and tridialed and",
"more power. No dice. Fried two drivers that way. * Dialed and redial",
"3D Printer Kit * Ramps 1.4 * A4988 Driver * Firmware: + Marin",
"from the original PCB. * Currently getting Repetier. Will update. * The z-axis",
"nozzle heating or not, if it's not printing, it works as it should.",
"My power supply is the original 12 V 360 W supply with the",
"V, the 11 amp power port is 11.96 V and 12.18 V depending",
"the bed and hotend I am using the LCD screen and rotary encoder",
"the Ramps 1.4 board twice * Swapped drivers around, bought new drivers *",
"and the hotend is 3.4 V * While heating the bed and hotend",
"riders to near atomic perfection. * Changed firmware to each of the 3",
"* Changed jumper configurations from 16th microstepper to 8th for more power. No",
"and 12.18 V depending on which heater is on. + The bed measures",
"Kit * Ramps 1.4 * A4988 Driver * Firmware: + Marin 1.1.8, -",
"so it isn't the driver pots * Cursed again * Scoured the web",
"drivers around, bought new drivers * Swapped X-Axis and Z-Axis motor connections *",
"is 11.96 V and 12.18 V depending on which heater is on. +",
"from 16th microstepper to 8th for more power. No dice. Fried two drivers",
"* Died a little. Just a little Hardware: * RepRap Guru DIY Prusa",
"port is 11.96 V and 12.18 V depending on which heater is on.",
"again * Scoured the web for similar issues * Looked for G-code that",
"is the original 12 V 360 W supply with the kit. + The",
"perfection. * Changed firmware to each of the 3 latest updates * Remounted",
"+ The bed measures 11.50 V and the hotend is 3.4 V *",
"* Scoured the web for similar issues * Looked for G-code that might",
"12.18 V depending on which heater is on. + The bed measures 11.50",
"direction * Cursed * Changed jumper configurations from 16th microstepper to 8th for",
"Cleaned threaded rod. * Leveled two Z-Axis threaded rod riders to near atomic",
"down. It whines, too. But, Z-Axis DOES work while not printing. It doesn't",
"Died a little. Just a little Hardware: * RepRap Guru DIY Prusa i3",
"latest updates * Remounted motor so both face same cardinal direction * Cursed",
"* RepRap Guru DIY Prusa i3 V2 3D Printer Kit * Ramps 1.4",
"for more power. No dice. Fried two drivers that way. * Dialed and",
"similar issues * Looked for G-code that might limit Z-Axis elevation * Died",
"updates * Remounted motor so both face same cardinal direction * Cursed *",
"Changed the Ramps 1.4 board twice * Swapped drivers around, bought new drivers",
"W supply with the kit. + The 5 amp power in is 12.02",
"encoder to move my axes. It works as expected until printing. I have",
"twice * Swapped drivers around, bought new drivers * Swapped X-Axis and Z-Axis",
"power supply is the original 12 V 360 W supply with the kit.",
"using the LCD screen and rotary encoder to move my axes. It works",
"Driver * Firmware: + Marin 1.1.8, - 1.1.7 (screen didn't function), - 1.1.6",
"RepRap Guru DIY Prusa i3 V2 3D Printer Kit * Ramps 1.4 *",
"works as it should. I don't know what else I can do to",
"V 360 W supply with the kit. + The 5 amp power in",
"Additional information: * My power supply is the original 12 V 360 W",
"- 1.1.7 (screen didn't function), - 1.1.6 (screen didn't function), + RepRapGuru\\_Marlin\\_v4, +",
"It attempts to work, maybe climbs on the Z-Axis, but screws back down.",
"on which heater is on. + The bed measures 11.50 V and the",
"Z-Axis DOES work while not printing. It doesn't matter if the bed and",
"* Currently getting Repetier. Will update. * The z-axis leadscrew is M5-0.8 mm",
"Fried two drivers that way. * Dialed and redial and tridialed and quaddialed",
"- 1.1.6 (screen didn't function), + RepRapGuru\\_Marlin\\_v4, + RepRapGuru\\_Marlin\\_v2 Additional information: * My",
"and nozzle heating or not, if it's not printing, it works as it",
"1.1.8, - 1.1.7 (screen didn't function), - 1.1.6 (screen didn't function), + RepRapGuru\\_Marlin\\_v4,",
"board twice * Swapped drivers around, bought new drivers * Swapped X-Axis and",
"the original PCB. * Currently getting Repetier. Will update. * The z-axis leadscrew",
"3 latest updates * Remounted motor so both face same cardinal direction *",
"the LCD screen and rotary encoder to move my axes. It works as",
"move my axes. It works as expected until printing. I have upgraded to",
"Z-Axis elevation * Died a little. Just a little Hardware: * RepRap Guru",
"Marin 1.1.8, - 1.1.7 (screen didn't function), - 1.1.6 (screen didn't function), +",
"kit. + The 5 amp power in is 12.02 V, the 11 amp",
"threaded rod riders to near atomic perfection. * Changed firmware to each of",
"hotbed from the original PCB. * Currently getting Repetier. Will update. * The",
"5 amp power in is 12.02 V, the 11 amp power port is",
"Changed jumper configurations from 16th microstepper to 8th for more power. No dice.",
"* Cleaned threaded rod. * Leveled two Z-Axis threaded rod riders to near",
"and rotary encoder to move my axes. It works as expected until printing.",
"not, if it's not printing, it works as it should. I don't know",
"a print. It attempts to work, maybe climbs on the Z-Axis, but screws",
"supply is the original 12 V 360 W supply with the kit. +",
"+ RepRapGuru\\_Marlin\\_v4, + RepRapGuru\\_Marlin\\_v2 Additional information: * My power supply is the original",
"It works as expected until printing. I have upgraded to an aluminum 12/24",
"and redial and tridialed and quaddialed the driver pots * Recalled the Z-motors",
"might limit Z-Axis elevation * Died a little. Just a little Hardware: *",
"No dice. Fried two drivers that way. * Dialed and redial and tridialed",
"microstepper to 8th for more power. No dice. Fried two drivers that way.",
"Ramps 1.4 * A4988 Driver * Firmware: + Marin 1.1.8, - 1.1.7 (screen",
"* Leveled two Z-Axis threaded rod riders to near atomic perfection. * Changed",
"function), - 1.1.6 (screen didn't function), + RepRapGuru\\_Marlin\\_v4, + RepRapGuru\\_Marlin\\_v2 Additional information: *",
"DIY Prusa i3 V2 3D Printer Kit * Ramps 1.4 * A4988 Driver",
"power port is 11.96 V and 12.18 V depending on which heater is",
"else I can do to troubleshoot this problem. I have: * Changed the",
"Recalled the Z-motors work while not printing so it isn't the driver pots",
"too. But, Z-Axis DOES work while not printing. It doesn't matter if the",
"1.1.6 (screen didn't function), + RepRapGuru\\_Marlin\\_v4, + RepRapGuru\\_Marlin\\_v2 Additional information: * My power",
"printing, it works as it should. I don't know what else I can",
"* Cursed again * Scoured the web for similar issues * Looked for",
"printing. I have upgraded to an aluminum 12/24 V hotbed from the original",
"The 5 amp power in is 12.02 V, the 11 amp power port",
"Just a little Hardware: * RepRap Guru DIY Prusa i3 V2 3D Printer",
"Remounted motor so both face same cardinal direction * Cursed * Changed jumper",
"an aluminum 12/24 V hotbed from the original PCB. * Currently getting Repetier.",
"screws back down. It whines, too. But, Z-Axis DOES work while not printing.",
"is 12.02 V, the 11 amp power port is 11.96 V and 12.18",
"amp power port is 11.96 V and 12.18 V depending on which heater",
"amp power in is 12.02 V, the 11 amp power port is 11.96",
"if it's not printing, it works as it should. I don't know what",
"12 V 360 W supply with the kit. + The 5 amp power",
"that might limit Z-Axis elevation * Died a little. Just a little Hardware:",
"doesn't matter if the bed and nozzle heating or not, if it's not",
"RepRapGuru\\_Marlin\\_v4, + RepRapGuru\\_Marlin\\_v2 Additional information: * My power supply is the original 12",
"Prusa i3 V2 3D Printer Kit * Ramps 1.4 * A4988 Driver *",
"of the 3 latest updates * Remounted motor so both face same cardinal",
"Ramps 1.4 board twice * Swapped drivers around, bought new drivers * Swapped",
"Changed firmware to each of the 3 latest updates * Remounted motor so",
"12/24 V hotbed from the original PCB. * Currently getting Repetier. Will update.",
"It whines, too. But, Z-Axis DOES work while not printing. It doesn't matter",
"RepRapGuru\\_Marlin\\_v2 Additional information: * My power supply is the original 12 V 360",
"doesn't work during a print. It attempts to work, maybe climbs on the",
"360 W supply with the kit. + The 5 amp power in is",
"* Changed firmware to each of the 3 latest updates * Remounted motor",
"* My power supply is the original 12 V 360 W supply with",
"can do to troubleshoot this problem. I have: * Changed the Ramps 1.4",
"and Z-Axis motor connections * Cleaned threaded rod. * Leveled two Z-Axis threaded",
"firmware to each of the 3 latest updates * Remounted motor so both",
"with the kit. + The 5 amp power in is 12.02 V, the",
"during a print. It attempts to work, maybe climbs on the Z-Axis, but",
"a little. Just a little Hardware: * RepRap Guru DIY Prusa i3 V2",
"near atomic perfection. * Changed firmware to each of the 3 latest updates",
"the Z-Axis, but screws back down. It whines, too. But, Z-Axis DOES work",
"to troubleshoot this problem. I have: * Changed the Ramps 1.4 board twice",
"Z-motors work while not printing so it isn't the driver pots * Cursed",
"Swapped X-Axis and Z-Axis motor connections * Cleaned threaded rod. * Leveled two",
"upgraded to an aluminum 12/24 V hotbed from the original PCB. * Currently",
"limit Z-Axis elevation * Died a little. Just a little Hardware: * RepRap",
"Firmware: + Marin 1.1.8, - 1.1.7 (screen didn't function), - 1.1.6 (screen didn't",
"motor connections * Cleaned threaded rod. * Leveled two Z-Axis threaded rod riders",
"redial and tridialed and quaddialed the driver pots * Recalled the Z-motors work",
"each of the 3 latest updates * Remounted motor so both face same",
"to move my axes. It works as expected until printing. I have upgraded",
"expected until printing. I have upgraded to an aluminum 12/24 V hotbed from",
"work while not printing. It doesn't matter if the bed and nozzle heating",
"configurations from 16th microstepper to 8th for more power. No dice. Fried two",
"12.02 V, the 11 amp power port is 11.96 V and 12.18 V",
"I have upgraded to an aluminum 12/24 V hotbed from the original PCB.",
"am using the LCD screen and rotary encoder to move my axes. It",
"work, maybe climbs on the Z-Axis, but screws back down. It whines, too.",
"rod. * Leveled two Z-Axis threaded rod riders to near atomic perfection. *",
"* Ramps 1.4 * A4988 Driver * Firmware: + Marin 1.1.8, - 1.1.7",
"it isn't the driver pots * Cursed again * Scoured the web for",
"Z-Axis doesn't work during a print. It attempts to work, maybe climbs on"
] |
[
"while I was preparing the SD card with the settings being 210°C for",
"started printing and kept heating the nozzle. I stopped it at 217°C. I",
"it to \"preheat\" mode while I was preparing the SD card with the",
"it at 217°C. I looked for an answer on the internet but all",
"back on. I then immediately requested the print to start. The CR-10 heated",
"I looked for an answer on the internet but all I could find",
"60°C for the bed. When I wanted to start the print I noticed",
"by the high-temp) and then powered it back on. I then immediately requested",
"up steadily while the \"requested\" temperature was still 210°C. Thiking it might be",
"for the nozzle and 60°C for the bed. When I wanted to start",
"while the \"requested\" temperature was still 210°C. Thiking it might be a mis-manipulation",
"start. The CR-10 heated up to the proper value, started printing and kept",
"kept heating the nozzle. I stopped it at 217°C. I looked for an",
"is new. Today I set it to \"preheat\" mode while I was preparing",
"was going up steadily while the \"requested\" temperature was still 210°C. Thiking it",
"still 210°C. Thiking it might be a mis-manipulation on my part I powered",
"any major trouble. The printer is new. Today I set it to \"preheat\"",
"up to the proper value, started printing and kept heating the nozzle. I",
"to start. The CR-10 heated up to the proper value, started printing and",
"nozzle and 60°C for the bed. When I wanted to start the print",
"settings being 210°C for the nozzle and 60°C for the bed. When I",
"start the print I noticed that the temperature showed as \"actual temperature\" on",
"heated up to the proper value, started printing and kept heating the nozzle.",
"made a few successful prints since I got my CR-10 two weeks ago",
"to start the print I noticed that the temperature showed as \"actual temperature\"",
"233°C and it was going up steadily while the \"requested\" temperature was still",
"on the printer's screen showed 233°C and it was going up steadily while",
"that the temperature showed as \"actual temperature\" on the printer's screen showed 233°C",
"it was going up steadily while the \"requested\" temperature was still 210°C. Thiking",
"CR-10 two weeks ago and I didn't run into any major trouble. The",
"the internet but all I could find is people having trouble with the",
"the settings being 210°C for the nozzle and 60°C for the bed. When",
"and I didn't run into any major trouble. The printer is new. Today",
"to the proper value, started printing and kept heating the nozzle. I stopped",
"I noticed that the temperature showed as \"actual temperature\" on the printer's screen",
"going up steadily while the \"requested\" temperature was still 210°C. Thiking it might",
"as \"actual temperature\" on the printer's screen showed 233°C and it was going",
"I got my CR-10 two weeks ago and I didn't run into any",
"powered it down for a few minutes (I got scared by the high-temp)",
"screen showed 233°C and it was going up steadily while the \"requested\" temperature",
"into any major trouble. The printer is new. Today I set it to",
"an answer on the internet but all I could find is people having",
"on. I then immediately requested the print to start. The CR-10 heated up",
"prints since I got my CR-10 two weeks ago and I didn't run",
"run into any major trouble. The printer is new. Today I set it",
"got scared by the high-temp) and then powered it back on. I then",
"at 217°C. I looked for an answer on the internet but all I",
"print to start. The CR-10 heated up to the proper value, started printing",
"and kept heating the nozzle. I stopped it at 217°C. I looked for",
"I set it to \"preheat\" mode while I was preparing the SD card",
"217°C. I looked for an answer on the internet but all I could",
"printer is new. Today I set it to \"preheat\" mode while I was",
"and 60°C for the bed. When I wanted to start the print I",
"heating the nozzle. I stopped it at 217°C. I looked for an answer",
"nozzle. I stopped it at 217°C. I looked for an answer on the",
"mis-manipulation on my part I powered it down for a few minutes (I",
"was preparing the SD card with the settings being 210°C for the nozzle",
"the temperature showed as \"actual temperature\" on the printer's screen showed 233°C and",
"on the internet but all I could find is people having trouble with",
"the proper value, started printing and kept heating the nozzle. I stopped it",
"find is people having trouble with the nozzle not heating at all ...",
"with the settings being 210°C for the nozzle and 60°C for the bed.",
"\"preheat\" mode while I was preparing the SD card with the settings being",
"all I could find is people having trouble with the nozzle not heating",
"to \"preheat\" mode while I was preparing the SD card with the settings",
"internet but all I could find is people having trouble with the nozzle",
"down for a few minutes (I got scared by the high-temp) and then",
"the SD card with the settings being 210°C for the nozzle and 60°C",
"didn't run into any major trouble. The printer is new. Today I set",
"requested the print to start. The CR-10 heated up to the proper value,",
"new. Today I set it to \"preheat\" mode while I was preparing the",
"on my part I powered it down for a few minutes (I got",
"the nozzle and 60°C for the bed. When I wanted to start the",
"The CR-10 heated up to the proper value, started printing and kept heating",
"being 210°C for the nozzle and 60°C for the bed. When I wanted",
"immediately requested the print to start. The CR-10 heated up to the proper",
"weeks ago and I didn't run into any major trouble. The printer is",
"and then powered it back on. I then immediately requested the print to",
"for an answer on the internet but all I could find is people",
"temperature was still 210°C. Thiking it might be a mis-manipulation on my part",
"part I powered it down for a few minutes (I got scared by",
"showed 233°C and it was going up steadily while the \"requested\" temperature was",
"the high-temp) and then powered it back on. I then immediately requested the",
"bed. When I wanted to start the print I noticed that the temperature",
"SD card with the settings being 210°C for the nozzle and 60°C for",
"print I noticed that the temperature showed as \"actual temperature\" on the printer's",
"then powered it back on. I then immediately requested the print to start.",
"it down for a few minutes (I got scared by the high-temp) and",
"major trouble. The printer is new. Today I set it to \"preheat\" mode",
"could find is people having trouble with the nozzle not heating at all",
"answer on the internet but all I could find is people having trouble",
"preparing the SD card with the settings being 210°C for the nozzle and",
"might be a mis-manipulation on my part I powered it down for a",
"minutes (I got scared by the high-temp) and then powered it back on.",
"printing and kept heating the nozzle. I stopped it at 217°C. I looked",
"temperature showed as \"actual temperature\" on the printer's screen showed 233°C and it",
"scared by the high-temp) and then powered it back on. I then immediately",
"but all I could find is people having trouble with the nozzle not",
"210°C for the nozzle and 60°C for the bed. When I wanted to",
"stopped it at 217°C. I looked for an answer on the internet but",
"then immediately requested the print to start. The CR-10 heated up to the",
"printer's screen showed 233°C and it was going up steadily while the \"requested\"",
"I stopped it at 217°C. I looked for an answer on the internet",
"I powered it down for a few minutes (I got scared by the",
"Today I set it to \"preheat\" mode while I was preparing the SD",
"a few minutes (I got scared by the high-temp) and then powered it",
"a few successful prints since I got my CR-10 two weeks ago and",
"few minutes (I got scared by the high-temp) and then powered it back",
"I then immediately requested the print to start. The CR-10 heated up to",
"noticed that the temperature showed as \"actual temperature\" on the printer's screen showed",
"I could find is people having trouble with the nozzle not heating at",
"and it was going up steadily while the \"requested\" temperature was still 210°C.",
"temperature\" on the printer's screen showed 233°C and it was going up steadily",
"for a few minutes (I got scared by the high-temp) and then powered",
"few successful prints since I got my CR-10 two weeks ago and I",
"for the bed. When I wanted to start the print I noticed that",
"successful prints since I got my CR-10 two weeks ago and I didn't",
"(I got scared by the high-temp) and then powered it back on. I",
"two weeks ago and I didn't run into any major trouble. The printer",
"ago and I didn't run into any major trouble. The printer is new.",
"I didn't run into any major trouble. The printer is new. Today I",
"Thiking it might be a mis-manipulation on my part I powered it down",
"I wanted to start the print I noticed that the temperature showed as",
"my part I powered it down for a few minutes (I got scared",
"210°C. Thiking it might be a mis-manipulation on my part I powered it",
"a mis-manipulation on my part I powered it down for a few minutes",
"the \"requested\" temperature was still 210°C. Thiking it might be a mis-manipulation on",
"showed as \"actual temperature\" on the printer's screen showed 233°C and it was",
"the nozzle. I stopped it at 217°C. I looked for an answer on",
"set it to \"preheat\" mode while I was preparing the SD card with",
"value, started printing and kept heating the nozzle. I stopped it at 217°C.",
"the printer's screen showed 233°C and it was going up steadily while the",
"my CR-10 two weeks ago and I didn't run into any major trouble.",
"mode while I was preparing the SD card with the settings being 210°C",
"When I wanted to start the print I noticed that the temperature showed",
"The printer is new. Today I set it to \"preheat\" mode while I",
"was still 210°C. Thiking it might be a mis-manipulation on my part I",
"it might be a mis-manipulation on my part I powered it down for",
"since I got my CR-10 two weeks ago and I didn't run into",
"CR-10 heated up to the proper value, started printing and kept heating the",
"proper value, started printing and kept heating the nozzle. I stopped it at",
"\"actual temperature\" on the printer's screen showed 233°C and it was going up",
"I was preparing the SD card with the settings being 210°C for the",
"the print I noticed that the temperature showed as \"actual temperature\" on the",
"the print to start. The CR-10 heated up to the proper value, started",
"the bed. When I wanted to start the print I noticed that the",
"I made a few successful prints since I got my CR-10 two weeks",
"card with the settings being 210°C for the nozzle and 60°C for the",
"\"requested\" temperature was still 210°C. Thiking it might be a mis-manipulation on my",
"be a mis-manipulation on my part I powered it down for a few",
"looked for an answer on the internet but all I could find is",
"got my CR-10 two weeks ago and I didn't run into any major",
"wanted to start the print I noticed that the temperature showed as \"actual",
"steadily while the \"requested\" temperature was still 210°C. Thiking it might be a",
"high-temp) and then powered it back on. I then immediately requested the print",
"trouble. The printer is new. Today I set it to \"preheat\" mode while",
"it back on. I then immediately requested the print to start. The CR-10",
"powered it back on. I then immediately requested the print to start. The"
] |
[
"shrinkage, since I will be printing parts that will fit into each other.",
"for outdoor purposes, but printable on unheated beds. I will mostly use it",
"up to 50°C/120°F) and car accessories (70°C/160°F). If it requires annealing, it should",
"sensor node enclosures (should withstand temperature up to 50°C/120°F) and car accessories (70°C/160°F).",
"requires annealing, it should have low shrinkage, since I will be printing parts",
"(should withstand temperature up to 50°C/120°F) and car accessories (70°C/160°F). If it requires",
"withstand temperature up to 50°C/120°F) and car accessories (70°C/160°F). If it requires annealing,",
"I am searching for 3D printing filaments, that are suitable for outdoor purposes,",
"should have low shrinkage, since I will be printing parts that will fit",
"enclosures (should withstand temperature up to 50°C/120°F) and car accessories (70°C/160°F). If it",
"use it for sensor node enclosures (should withstand temperature up to 50°C/120°F) and",
"am searching for 3D printing filaments, that are suitable for outdoor purposes, but",
"filaments, that are suitable for outdoor purposes, but printable on unheated beds. I",
"outdoor purposes, but printable on unheated beds. I will mostly use it for",
"it should have low shrinkage, since I will be printing parts that will",
"for 3D printing filaments, that are suitable for outdoor purposes, but printable on",
"node enclosures (should withstand temperature up to 50°C/120°F) and car accessories (70°C/160°F). If",
"If it requires annealing, it should have low shrinkage, since I will be",
"it requires annealing, it should have low shrinkage, since I will be printing",
"accessories (70°C/160°F). If it requires annealing, it should have low shrinkage, since I",
"annealing, it should have low shrinkage, since I will be printing parts that",
"will mostly use it for sensor node enclosures (should withstand temperature up to",
"on unheated beds. I will mostly use it for sensor node enclosures (should",
"printable on unheated beds. I will mostly use it for sensor node enclosures",
"and car accessories (70°C/160°F). If it requires annealing, it should have low shrinkage,",
"it for sensor node enclosures (should withstand temperature up to 50°C/120°F) and car",
"are suitable for outdoor purposes, but printable on unheated beds. I will mostly",
"unheated beds. I will mostly use it for sensor node enclosures (should withstand",
"3D printing filaments, that are suitable for outdoor purposes, but printable on unheated",
"printing filaments, that are suitable for outdoor purposes, but printable on unheated beds.",
"have low shrinkage, since I will be printing parts that will fit into",
"that are suitable for outdoor purposes, but printable on unheated beds. I will",
"suitable for outdoor purposes, but printable on unheated beds. I will mostly use",
"car accessories (70°C/160°F). If it requires annealing, it should have low shrinkage, since",
"for sensor node enclosures (should withstand temperature up to 50°C/120°F) and car accessories",
"50°C/120°F) and car accessories (70°C/160°F). If it requires annealing, it should have low",
"mostly use it for sensor node enclosures (should withstand temperature up to 50°C/120°F)",
"temperature up to 50°C/120°F) and car accessories (70°C/160°F). If it requires annealing, it",
"searching for 3D printing filaments, that are suitable for outdoor purposes, but printable",
"beds. I will mostly use it for sensor node enclosures (should withstand temperature",
"(70°C/160°F). If it requires annealing, it should have low shrinkage, since I will",
"I will mostly use it for sensor node enclosures (should withstand temperature up",
"low shrinkage, since I will be printing parts that will fit into each",
"to 50°C/120°F) and car accessories (70°C/160°F). If it requires annealing, it should have",
"purposes, but printable on unheated beds. I will mostly use it for sensor",
"but printable on unheated beds. I will mostly use it for sensor node"
] |
[
"FDM printing, or some process similar to it? I think it has all",
"while. I couldn't find any examples or anyone talking about such a material",
"a material for use, on here or the general Internet. I wonder if",
"about such a material for use, on here or the general Internet. I",
"and could produce a flexible transluscent print. It's cheap, hotends are cheap, and",
"all of the required properties, and could produce a flexible transluscent print. It's",
"of the required properties, and could produce a flexible transluscent print. It's cheap,",
"It's cheap, hotends are cheap, and the technology has been around for a",
"for use, on here or the general Internet. I wonder if there are",
"for FDM printing, or some process similar to it? I think it has",
"general Internet. I wonder if there are tradeoffs or challenges that make it",
"required properties, and could produce a flexible transluscent print. It's cheap, hotends are",
"cheap, and the technology has been around for a while. I couldn't find",
"on here or the general Internet. I wonder if there are tradeoffs or",
"suitable for FDM printing, or some process similar to it? I think it",
"glue suitable for FDM printing, or some process similar to it? I think",
"talking about such a material for use, on here or the general Internet.",
"the required properties, and could produce a flexible transluscent print. It's cheap, hotends",
"could produce a flexible transluscent print. It's cheap, hotends are cheap, and the",
"such a material for use, on here or the general Internet. I wonder",
"or anyone talking about such a material for use, on here or the",
"printing, or some process similar to it? I think it has all of",
"flexible transluscent print. It's cheap, hotends are cheap, and the technology has been",
"has been around for a while. I couldn't find any examples or anyone",
"couldn't find any examples or anyone talking about such a material for use,",
"it? I think it has all of the required properties, and could produce",
"has all of the required properties, and could produce a flexible transluscent print.",
"a flexible transluscent print. It's cheap, hotends are cheap, and the technology has",
"hot glue suitable for FDM printing, or some process similar to it? I",
"process similar to it? I think it has all of the required properties,",
"a while. I couldn't find any examples or anyone talking about such a",
"any examples or anyone talking about such a material for use, on here",
"hotends are cheap, and the technology has been around for a while. I",
"think it has all of the required properties, and could produce a flexible",
"or some process similar to it? I think it has all of the",
"similar to it? I think it has all of the required properties, and",
"Is hot glue suitable for FDM printing, or some process similar to it?",
"properties, and could produce a flexible transluscent print. It's cheap, hotends are cheap,",
"are cheap, and the technology has been around for a while. I couldn't",
"for a while. I couldn't find any examples or anyone talking about such",
"Internet. I wonder if there are tradeoffs or challenges that make it not",
"technology has been around for a while. I couldn't find any examples or",
"I wonder if there are tradeoffs or challenges that make it not worth",
"the technology has been around for a while. I couldn't find any examples",
"I think it has all of the required properties, and could produce a",
"the general Internet. I wonder if there are tradeoffs or challenges that make",
"cheap, hotends are cheap, and the technology has been around for a while.",
"find any examples or anyone talking about such a material for use, on",
"and the technology has been around for a while. I couldn't find any",
"some process similar to it? I think it has all of the required",
"produce a flexible transluscent print. It's cheap, hotends are cheap, and the technology",
"anyone talking about such a material for use, on here or the general",
"material for use, on here or the general Internet. I wonder if there",
"I couldn't find any examples or anyone talking about such a material for",
"transluscent print. It's cheap, hotends are cheap, and the technology has been around",
"print. It's cheap, hotends are cheap, and the technology has been around for",
"or the general Internet. I wonder if there are tradeoffs or challenges that",
"examples or anyone talking about such a material for use, on here or",
"use, on here or the general Internet. I wonder if there are tradeoffs",
"around for a while. I couldn't find any examples or anyone talking about",
"to it? I think it has all of the required properties, and could",
"it has all of the required properties, and could produce a flexible transluscent",
"wonder if there are tradeoffs or challenges that make it not worth pursuing.",
"been around for a while. I couldn't find any examples or anyone talking",
"here or the general Internet. I wonder if there are tradeoffs or challenges"
] |
[
"control if it clicks at special angles or randomly, but it clicks randomly.",
"and A4988's. During prints, my extruder motor randomly clicks. I touched the filament",
"own a DIY Hypercube Evolution equipped with Tevo Titan extruder, Clone Chimera hotend",
"Clone Chimera hotend and Capricorn's High-temp PTFE tube. I use RAMPS with MigiOE",
"tube. I use RAMPS with MigiOE and A4988's. During prints, my extruder motor",
"prints, my extruder motor randomly clicks. I touched the filament and during the",
"use RAMPS with MigiOE and A4988's. During prints, my extruder motor randomly clicks.",
"equipped with Tevo Titan extruder, Clone Chimera hotend and Capricorn's High-temp PTFE tube.",
"motor randomly clicks. I touched the filament and during the clicks I'ven't felt",
"randomly clicks. I touched the filament and during the clicks I'ven't felt any",
"and shiny. Do you have any suggestions? (the sound really gives me headache)",
"my extruder motor randomly clicks. I touched the filament and during the clicks",
"clicks at special angles or randomly, but it clicks randomly. My prints do",
"MigiOE and A4988's. During prints, my extruder motor randomly clicks. I touched the",
"the motor shaft to control if it clicks at special angles or randomly,",
"at the motor shaft to control if it clicks at special angles or",
"High-temp PTFE tube. I use RAMPS with MigiOE and A4988's. During prints, my",
"I own a DIY Hypercube Evolution equipped with Tevo Titan extruder, Clone Chimera",
"Tevo Titan extruder, Clone Chimera hotend and Capricorn's High-temp PTFE tube. I use",
"at special angles or randomly, but it clicks randomly. My prints do look",
"but it clicks randomly. My prints do look very good: clear and shiny.",
"it clicks randomly. My prints do look very good: clear and shiny. Do",
"A4988's. During prints, my extruder motor randomly clicks. I touched the filament and",
"Chimera hotend and Capricorn's High-temp PTFE tube. I use RAMPS with MigiOE and",
"extruder, Clone Chimera hotend and Capricorn's High-temp PTFE tube. I use RAMPS with",
"looked at the motor shaft to control if it clicks at special angles",
"with extrusion. I looked at the motor shaft to control if it clicks",
"special angles or randomly, but it clicks randomly. My prints do look very",
"it clicks at special angles or randomly, but it clicks randomly. My prints",
"shaft to control if it clicks at special angles or randomly, but it",
"clicks I'ven't felt any problems with extrusion. I looked at the motor shaft",
"to control if it clicks at special angles or randomly, but it clicks",
"clicks randomly. My prints do look very good: clear and shiny. Do you",
"look very good: clear and shiny. Do you have any suggestions? (the sound",
"the clicks I'ven't felt any problems with extrusion. I looked at the motor",
"do look very good: clear and shiny. Do you have any suggestions? (the",
"My prints do look very good: clear and shiny. Do you have any",
"extrusion. I looked at the motor shaft to control if it clicks at",
"RAMPS with MigiOE and A4988's. During prints, my extruder motor randomly clicks. I",
"clear and shiny. Do you have any suggestions? (the sound really gives me",
"PTFE tube. I use RAMPS with MigiOE and A4988's. During prints, my extruder",
"or randomly, but it clicks randomly. My prints do look very good: clear",
"good: clear and shiny. Do you have any suggestions? (the sound really gives",
"felt any problems with extrusion. I looked at the motor shaft to control",
"a DIY Hypercube Evolution equipped with Tevo Titan extruder, Clone Chimera hotend and",
"touched the filament and during the clicks I'ven't felt any problems with extrusion.",
"filament and during the clicks I'ven't felt any problems with extrusion. I looked",
"and during the clicks I'ven't felt any problems with extrusion. I looked at",
"angles or randomly, but it clicks randomly. My prints do look very good:",
"prints do look very good: clear and shiny. Do you have any suggestions?",
"and Capricorn's High-temp PTFE tube. I use RAMPS with MigiOE and A4988's. During",
"I'ven't felt any problems with extrusion. I looked at the motor shaft to",
"randomly, but it clicks randomly. My prints do look very good: clear and",
"Evolution equipped with Tevo Titan extruder, Clone Chimera hotend and Capricorn's High-temp PTFE",
"Titan extruder, Clone Chimera hotend and Capricorn's High-temp PTFE tube. I use RAMPS",
"I use RAMPS with MigiOE and A4988's. During prints, my extruder motor randomly",
"with MigiOE and A4988's. During prints, my extruder motor randomly clicks. I touched",
"During prints, my extruder motor randomly clicks. I touched the filament and during",
"extruder motor randomly clicks. I touched the filament and during the clicks I'ven't",
"if it clicks at special angles or randomly, but it clicks randomly. My",
"very good: clear and shiny. Do you have any suggestions? (the sound really",
"problems with extrusion. I looked at the motor shaft to control if it",
"during the clicks I'ven't felt any problems with extrusion. I looked at the",
"any problems with extrusion. I looked at the motor shaft to control if",
"the filament and during the clicks I'ven't felt any problems with extrusion. I",
"motor shaft to control if it clicks at special angles or randomly, but",
"Capricorn's High-temp PTFE tube. I use RAMPS with MigiOE and A4988's. During prints,",
"with Tevo Titan extruder, Clone Chimera hotend and Capricorn's High-temp PTFE tube. I",
"I touched the filament and during the clicks I'ven't felt any problems with",
"clicks. I touched the filament and during the clicks I'ven't felt any problems",
"randomly. My prints do look very good: clear and shiny. Do you have",
"DIY Hypercube Evolution equipped with Tevo Titan extruder, Clone Chimera hotend and Capricorn's",
"hotend and Capricorn's High-temp PTFE tube. I use RAMPS with MigiOE and A4988's.",
"I looked at the motor shaft to control if it clicks at special",
"Hypercube Evolution equipped with Tevo Titan extruder, Clone Chimera hotend and Capricorn's High-temp"
] |
[
"this. I am attempting to widen the part essentially 3mm. This would involve",
"attempting to widen the part essentially 3mm. This would involve modifying the chain",
"I can do the above in FreeCAD? I'm learning this so tutorial links",
"widen the part essentially 3mm. This would involve modifying the chain segments, and",
"appeared to be one piece, the slicing proved otherwise. Is there a way",
"do the above in FreeCAD? I'm learning this so tutorial links would be",
"anchor points. I have already attempted this with 3D Builder and the result",
"and the anchor points. I have already attempted this with 3D Builder and",
"points. I have already attempted this with 3D Builder and the result was",
"who can explain this process to me in FreeCAD that would also be",
"piece, the slicing proved otherwise. Is there a way that I can do",
"links would be more than sufficient. But if there is someone who can",
"some parts on [this](https://www.thingiverse.com/thing:2115095) thing. I'm kind of new to dealing with the",
"this with 3D Builder and the result was less than stellar. I split",
"put all the parts back together and merged them in 3D Builder, the",
"them in 3D Builder, the resultant model, while visually on screen appeared to",
"with 3D Builder and the result was less than stellar. I split the",
"so tutorial links would be more than sufficient. But if there is someone",
"top & bottom bits). The intent was to break the part, translate one",
"(including the top & bottom bits). The intent was to break the part,",
"be more than sufficient. But if there is someone who can explain this",
"while visually on screen appeared to be one piece, the slicing proved otherwise.",
"the part, cloned off about 3mm of the middle of the X-Chain (including",
"about 3mm of the middle of the X-Chain (including the top & bottom",
"there is someone who can explain this process to me in FreeCAD that",
"3mm into the gap. When I put all the parts back together and",
"essentially 3mm. This would involve modifying the chain segments, and the anchor points.",
"the resultant model, while visually on screen appeared to be one piece, the",
"screen appeared to be one piece, the slicing proved otherwise. Is there a",
"in 3D Builder, the resultant model, while visually on screen appeared to be",
"X-Chain (including the top & bottom bits). The intent was to break the",
"on [this](https://www.thingiverse.com/thing:2115095) thing. I'm kind of new to dealing with the modeling aspects",
"segments, and the anchor points. I have already attempted this with 3D Builder",
"less than stellar. I split the part, cloned off about 3mm of the",
"cloned off about 3mm of the middle of the X-Chain (including the top",
"modifying the chain segments, and the anchor points. I have already attempted this",
"back the 3mm into the gap. When I put all the parts back",
"bits). The intent was to break the part, translate one of the halves",
"one of the halves off 3mm, add back the 3mm into the gap.",
"I have already attempted this with 3D Builder and the result was less",
"into the gap. When I put all the parts back together and merged",
"to break the part, translate one of the halves off 3mm, add back",
"Builder, the resultant model, while visually on screen appeared to be one piece,",
"off 3mm, add back the 3mm into the gap. When I put all",
"be one piece, the slicing proved otherwise. Is there a way that I",
"part, translate one of the halves off 3mm, add back the 3mm into",
"I'm trying to modify some parts on [this](https://www.thingiverse.com/thing:2115095) thing. I'm kind of new",
"merged them in 3D Builder, the resultant model, while visually on screen appeared",
"thing. I'm kind of new to dealing with the modeling aspects of this.",
"I split the part, cloned off about 3mm of the middle of the",
"Is there a way that I can do the above in FreeCAD? I'm",
"bottom bits). The intent was to break the part, translate one of the",
"intent was to break the part, translate one of the halves off 3mm,",
"and the result was less than stellar. I split the part, cloned off",
"way that I can do the above in FreeCAD? I'm learning this so",
"to dealing with the modeling aspects of this. I am attempting to widen",
"halves off 3mm, add back the 3mm into the gap. When I put",
"attempted this with 3D Builder and the result was less than stellar. I",
"3mm of the middle of the X-Chain (including the top & bottom bits).",
"the slicing proved otherwise. Is there a way that I can do the",
"proved otherwise. Is there a way that I can do the above in",
"3D Builder and the result was less than stellar. I split the part,",
"result was less than stellar. I split the part, cloned off about 3mm",
"middle of the X-Chain (including the top & bottom bits). The intent was",
"of the X-Chain (including the top & bottom bits). The intent was to",
"translate one of the halves off 3mm, add back the 3mm into the",
"trying to modify some parts on [this](https://www.thingiverse.com/thing:2115095) thing. I'm kind of new to",
"the parts back together and merged them in 3D Builder, the resultant model,",
"can do the above in FreeCAD? I'm learning this so tutorial links would",
"more than sufficient. But if there is someone who can explain this process",
"would be more than sufficient. But if there is someone who can explain",
"that I can do the above in FreeCAD? I'm learning this so tutorial",
"was to break the part, translate one of the halves off 3mm, add",
"the gap. When I put all the parts back together and merged them",
"is someone who can explain this process to me in FreeCAD that would",
"the result was less than stellar. I split the part, cloned off about",
"But if there is someone who can explain this process to me in",
"I'm learning this so tutorial links would be more than sufficient. But if",
"I'm kind of new to dealing with the modeling aspects of this. I",
"part essentially 3mm. This would involve modifying the chain segments, and the anchor",
"the anchor points. I have already attempted this with 3D Builder and the",
"I am attempting to widen the part essentially 3mm. This would involve modifying",
"if there is someone who can explain this process to me in FreeCAD",
"3D Builder, the resultant model, while visually on screen appeared to be one",
"all the parts back together and merged them in 3D Builder, the resultant",
"back together and merged them in 3D Builder, the resultant model, while visually",
"modeling aspects of this. I am attempting to widen the part essentially 3mm.",
"the 3mm into the gap. When I put all the parts back together",
"FreeCAD? I'm learning this so tutorial links would be more than sufficient. But",
"stellar. I split the part, cloned off about 3mm of the middle of",
"the halves off 3mm, add back the 3mm into the gap. When I",
"to widen the part essentially 3mm. This would involve modifying the chain segments,",
"When I put all the parts back together and merged them in 3D",
"aspects of this. I am attempting to widen the part essentially 3mm. This",
"modify some parts on [this](https://www.thingiverse.com/thing:2115095) thing. I'm kind of new to dealing with",
"otherwise. Is there a way that I can do the above in FreeCAD?",
"of this. I am attempting to widen the part essentially 3mm. This would",
"can explain this process to me in FreeCAD that would also be appreciated.",
"and merged them in 3D Builder, the resultant model, while visually on screen",
"tutorial links would be more than sufficient. But if there is someone who",
"of the middle of the X-Chain (including the top & bottom bits). The",
"the chain segments, and the anchor points. I have already attempted this with",
"parts back together and merged them in 3D Builder, the resultant model, while",
"to modify some parts on [this](https://www.thingiverse.com/thing:2115095) thing. I'm kind of new to dealing",
"above in FreeCAD? I'm learning this so tutorial links would be more than",
"add back the 3mm into the gap. When I put all the parts",
"This would involve modifying the chain segments, and the anchor points. I have",
"model, while visually on screen appeared to be one piece, the slicing proved",
"The intent was to break the part, translate one of the halves off",
"visually on screen appeared to be one piece, the slicing proved otherwise. Is",
"a way that I can do the above in FreeCAD? I'm learning this",
"slicing proved otherwise. Is there a way that I can do the above",
"the top & bottom bits). The intent was to break the part, translate",
"3mm, add back the 3mm into the gap. When I put all the",
"learning this so tutorial links would be more than sufficient. But if there",
"part, cloned off about 3mm of the middle of the X-Chain (including the",
"off about 3mm of the middle of the X-Chain (including the top &",
"Builder and the result was less than stellar. I split the part, cloned",
"in FreeCAD? I'm learning this so tutorial links would be more than sufficient.",
"of the halves off 3mm, add back the 3mm into the gap. When",
"the part essentially 3mm. This would involve modifying the chain segments, and the",
"was less than stellar. I split the part, cloned off about 3mm of",
"on screen appeared to be one piece, the slicing proved otherwise. Is there",
"the modeling aspects of this. I am attempting to widen the part essentially",
"new to dealing with the modeling aspects of this. I am attempting to",
"one piece, the slicing proved otherwise. Is there a way that I can",
"I put all the parts back together and merged them in 3D Builder,",
"resultant model, while visually on screen appeared to be one piece, the slicing",
"[this](https://www.thingiverse.com/thing:2115095) thing. I'm kind of new to dealing with the modeling aspects of",
"have already attempted this with 3D Builder and the result was less than",
"someone who can explain this process to me in FreeCAD that would also",
"there a way that I can do the above in FreeCAD? I'm learning",
"& bottom bits). The intent was to break the part, translate one of",
"sufficient. But if there is someone who can explain this process to me",
"parts on [this](https://www.thingiverse.com/thing:2115095) thing. I'm kind of new to dealing with the modeling",
"involve modifying the chain segments, and the anchor points. I have already attempted",
"the middle of the X-Chain (including the top & bottom bits). The intent",
"together and merged them in 3D Builder, the resultant model, while visually on",
"this so tutorial links would be more than sufficient. But if there is",
"dealing with the modeling aspects of this. I am attempting to widen the",
"would involve modifying the chain segments, and the anchor points. I have already",
"than sufficient. But if there is someone who can explain this process to",
"with the modeling aspects of this. I am attempting to widen the part",
"break the part, translate one of the halves off 3mm, add back the",
"the above in FreeCAD? I'm learning this so tutorial links would be more",
"already attempted this with 3D Builder and the result was less than stellar.",
"to be one piece, the slicing proved otherwise. Is there a way that",
"of new to dealing with the modeling aspects of this. I am attempting",
"gap. When I put all the parts back together and merged them in",
"chain segments, and the anchor points. I have already attempted this with 3D",
"am attempting to widen the part essentially 3mm. This would involve modifying the",
"kind of new to dealing with the modeling aspects of this. I am",
"split the part, cloned off about 3mm of the middle of the X-Chain",
"the X-Chain (including the top & bottom bits). The intent was to break",
"3mm. This would involve modifying the chain segments, and the anchor points. I",
"than stellar. I split the part, cloned off about 3mm of the middle",
"the part, translate one of the halves off 3mm, add back the 3mm"
] |
[
"by a fresh install of the latest Rep G. I rebuilt the profiles",
"(set extruder temperature) ``` It does not contain a ``` M109 S110 (set",
"haven't started to troubleshoot yet. I am looking for suggestions on how to",
"few seconds after start of print, I noticed that the print bed temp",
"prints normally, and the build plate temperature holds for the duration of the",
"issue by a fresh install of the latest Rep G. I rebuilt the",
"the print starts the print bed begins cooling. It is cooling before any",
"2); cylinder(d = 9, h = 2); } ``` Pᴀᴜʟsᴛᴇʀ2/Oscar Once the print",
"Since there was no M109 the bed plate cooled to ambient temperature. There",
"230/110 from this open scad. ``` difference() { cylinder(d = 10, h =",
"= 2); } ``` Pᴀᴜʟsᴛᴇʀ2/Oscar Once the print starts the print bed begins",
"and now it does. The test print is ABS at 230/110 from this",
"here. Most likely it is a Rep G configuration error of some sort.",
"I am looking for suggestions on how to troubleshoot the issue. **Edit 1:**",
"a simple abs print at 230/110 degrees. A few seconds after start of",
"does. The test print is ABS at 230/110 from this open scad. ```",
"h = 2); } ``` Pᴀᴜʟsᴛᴇʀ2/Oscar Once the print starts the print bed",
"any filament is laid down. **Edit 2:** Examination of the gcode shows the",
"the issue by a fresh install of the latest Rep G. I rebuilt",
"cylinder(d = 10, h = 2); cylinder(d = 9, h = 2); }",
"2); } ``` Pᴀᴜʟsᴛᴇʀ2/Oscar Once the print starts the print bed begins cooling.",
"I reseated the USB cord and now it does. The test print is",
"temperature holds for the duration of the print. The drop in temperature last",
"the build plate temperature holds for the duration of the print. The drop",
"before actually starting the print. Since there was no M109 the bed plate",
"of the latest Rep G. I rebuilt the profiles from scratch with G",
"Flashforge Creator Dual Extrusion 3D Printer with RepG ([ReplicatorG](http://replicat.org/)), and tonight a print",
"RepG ([ReplicatorG](http://replicat.org/)), and tonight a print completely detached from the build plate. I",
"print starts the print bed begins cooling. It is cooling before any filament",
"normally, and the build plate temperature holds for the duration of the print.",
"printer. I reseated the USB cord and now it does. The test print",
"print. Since there was no M109 the bed plate cooled to ambient temperature.",
"I resolved the issue by a fresh install of the latest Rep G.",
"Rep G configuration error of some sort. **Edit 3:** I resolved the issue",
"Extrusion 3D Printer with RepG ([ReplicatorG](http://replicat.org/)), and tonight a print completely detached from",
"Tonight RepG would not connect to the printer. I reseated the USB cord",
"It is cooling before any filament is laid down. **Edit 2:** Examination of",
"to the fact that I tend to preheat the printer before actually starting",
"install of the latest Rep G. I rebuilt the profiles from scratch with",
"230/110 degrees. A few seconds after start of print, I noticed that the",
"troubleshoot yet. I am looking for suggestions on how to troubleshoot the issue.",
"the model prints normally, and the build plate temperature holds for the duration",
"hardware issue here. Most likely it is a Rep G configuration error of",
"I rebuilt the profiles from scratch with G Code to set the correct",
"starts the print bed begins cooling. It is cooling before any filament is",
"a Flashforge Creator Dual Extrusion 3D Printer with RepG ([ReplicatorG](http://replicat.org/)), and tonight a",
"contain ``` M104 S230 T1 (set extruder temperature) ``` It does not contain",
"It does contain ``` M104 S230 T1 (set extruder temperature) ``` It does",
"= 2); cylinder(d = 9, h = 2); } ``` Pᴀᴜʟsᴛᴇʀ2/Oscar Once the",
"the root cause. It does contain ``` M104 S230 T1 (set extruder temperature)",
"tend to preheat the printer before actually starting the print. Since there was",
"started to troubleshoot yet. I am looking for suggestions on how to troubleshoot",
"} ``` Pᴀᴜʟsᴛᴇʀ2/Oscar Once the print starts the print bed begins cooling. It",
"a print completely detached from the build plate. I reset everything and watched",
"how to troubleshoot the issue. **Edit 1:** Tonight RepG would not connect to",
"a fresh install of the latest Rep G. I rebuilt the profiles from",
"When I manually add the M109 to the gcode file, the model prints",
"to troubleshoot yet. I am looking for suggestions on how to troubleshoot the",
"to the gcode file, the model prints normally, and the build plate temperature",
"``` When I manually add the M109 to the gcode file, the model",
"2:** Examination of the gcode shows the root cause. It does contain ```",
"everything and watched it closely. It is a simple abs print at 230/110",
"on how to troubleshoot the issue. **Edit 1:** Tonight RepG would not connect",
"at 230/110 from this open scad. ``` difference() { cylinder(d = 10, h",
"to ambient temperature. There isn't a hardware issue here. Most likely it is",
"cooling before any filament is laid down. **Edit 2:** Examination of the gcode",
"is laid down. **Edit 2:** Examination of the gcode shows the root cause.",
"I noticed that the print bed temp had dropped to 109... and kept",
"S110 (set build plate temperature) ``` When I manually add the M109 to",
"and the build plate temperature holds for the duration of the print. The",
"is a Rep G configuration error of some sort. **Edit 3:** I resolved",
"had dropped to 109... and kept dropping. This is new behavior. I haven't",
"temperature last week is due to the fact that I tend to preheat",
"error of some sort. **Edit 3:** I resolved the issue by a fresh",
"not connect to the printer. I reseated the USB cord and now it",
"bed begins cooling. It is cooling before any filament is laid down. **Edit",
"Creator Dual Extrusion 3D Printer with RepG ([ReplicatorG](http://replicat.org/)), and tonight a print completely",
"the issue. **Edit 1:** Tonight RepG would not connect to the printer. I",
"and watched it closely. It is a simple abs print at 230/110 degrees.",
"A few seconds after start of print, I noticed that the print bed",
"seconds after start of print, I noticed that the print bed temp had",
"open scad. ``` difference() { cylinder(d = 10, h = 2); cylinder(d =",
"this open scad. ``` difference() { cylinder(d = 10, h = 2); cylinder(d",
"is new behavior. I haven't started to troubleshoot yet. I am looking for",
"ABS at 230/110 from this open scad. ``` difference() { cylinder(d = 10,",
"It does not contain a ``` M109 S110 (set build plate temperature) ```",
"simple abs print at 230/110 degrees. A few seconds after start of print,",
"= 10, h = 2); cylinder(d = 9, h = 2); } ```",
"at 230/110 degrees. A few seconds after start of print, I noticed that",
"before any filament is laid down. **Edit 2:** Examination of the gcode shows",
"difference() { cylinder(d = 10, h = 2); cylinder(d = 9, h =",
"not contain a ``` M109 S110 (set build plate temperature) ``` When I",
"the gcode file, the model prints normally, and the build plate temperature holds",
"printer before actually starting the print. Since there was no M109 the bed",
"cylinder(d = 9, h = 2); } ``` Pᴀᴜʟsᴛᴇʀ2/Oscar Once the print starts",
"add the M109 to the gcode file, the model prints normally, and the",
"Most likely it is a Rep G configuration error of some sort. **Edit",
"plate. I reset everything and watched it closely. It is a simple abs",
"degrees. A few seconds after start of print, I noticed that the print",
"reseated the USB cord and now it does. The test print is ABS",
"gcode file, the model prints normally, and the build plate temperature holds for",
"holds for the duration of the print. The drop in temperature last week",
"the printer before actually starting the print. Since there was no M109 the",
"plate cooled to ambient temperature. There isn't a hardware issue here. Most likely",
"was no M109 the bed plate cooled to ambient temperature. There isn't a",
"the print bed begins cooling. It is cooling before any filament is laid",
"plate temperature holds for the duration of the print. The drop in temperature",
"sort. **Edit 3:** I resolved the issue by a fresh install of the",
"dropping. This is new behavior. I haven't started to troubleshoot yet. I am",
"no M109 the bed plate cooled to ambient temperature. There isn't a hardware",
"looking for suggestions on how to troubleshoot the issue. **Edit 1:** Tonight RepG",
"root cause. It does contain ``` M104 S230 T1 (set extruder temperature) ```",
"I manually add the M109 to the gcode file, the model prints normally,",
"detached from the build plate. I reset everything and watched it closely. It",
"of the print. The drop in temperature last week is due to the",
"build plate. I reset everything and watched it closely. It is a simple",
"laid down. **Edit 2:** Examination of the gcode shows the root cause. It",
"of print, I noticed that the print bed temp had dropped to 109...",
"= 9, h = 2); } ``` Pᴀᴜʟsᴛᴇʀ2/Oscar Once the print starts the",
"from scratch with G Code to set the correct bed temp. Thank you",
"{ cylinder(d = 10, h = 2); cylinder(d = 9, h = 2);",
"M104 S230 T1 (set extruder temperature) ``` It does not contain a ```",
"starting the print. Since there was no M109 the bed plate cooled to",
"of the gcode shows the root cause. It does contain ``` M104 S230",
"now it does. The test print is ABS at 230/110 from this open",
"to 109... and kept dropping. This is new behavior. I haven't started to",
"manually add the M109 to the gcode file, the model prints normally, and",
"**Edit 3:** I resolved the issue by a fresh install of the latest",
"am using a Flashforge Creator Dual Extrusion 3D Printer with RepG ([ReplicatorG](http://replicat.org/)), and",
"dropped to 109... and kept dropping. This is new behavior. I haven't started",
"isn't a hardware issue here. Most likely it is a Rep G configuration",
"G configuration error of some sort. **Edit 3:** I resolved the issue by",
"the M109 to the gcode file, the model prints normally, and the build",
"completely detached from the build plate. I reset everything and watched it closely.",
"cooled to ambient temperature. There isn't a hardware issue here. Most likely it",
"of some sort. **Edit 3:** I resolved the issue by a fresh install",
"begins cooling. It is cooling before any filament is laid down. **Edit 2:**",
"G. I rebuilt the profiles from scratch with G Code to set the",
"a ``` M109 S110 (set build plate temperature) ``` When I manually add",
"from the build plate. I reset everything and watched it closely. It is",
"is cooling before any filament is laid down. **Edit 2:** Examination of the",
"109... and kept dropping. This is new behavior. I haven't started to troubleshoot",
"does not contain a ``` M109 S110 (set build plate temperature) ``` When",
"closely. It is a simple abs print at 230/110 degrees. A few seconds",
"**Edit 1:** Tonight RepG would not connect to the printer. I reseated the",
"It is a simple abs print at 230/110 degrees. A few seconds after",
"week is due to the fact that I tend to preheat the printer",
"to the printer. I reseated the USB cord and now it does. The",
"the USB cord and now it does. The test print is ABS at",
"3:** I resolved the issue by a fresh install of the latest Rep",
"scratch with G Code to set the correct bed temp. Thank you for",
"and kept dropping. This is new behavior. I haven't started to troubleshoot yet.",
"Once the print starts the print bed begins cooling. It is cooling before",
"temperature. There isn't a hardware issue here. Most likely it is a Rep",
"connect to the printer. I reseated the USB cord and now it does.",
"noticed that the print bed temp had dropped to 109... and kept dropping.",
"to troubleshoot the issue. **Edit 1:** Tonight RepG would not connect to the",
"is due to the fact that I tend to preheat the printer before",
"a hardware issue here. Most likely it is a Rep G configuration error",
"watched it closely. It is a simple abs print at 230/110 degrees. A",
"am looking for suggestions on how to troubleshoot the issue. **Edit 1:** Tonight",
"suggestions on how to troubleshoot the issue. **Edit 1:** Tonight RepG would not",
"configuration error of some sort. **Edit 3:** I resolved the issue by a",
"RepG would not connect to the printer. I reseated the USB cord and",
"in temperature last week is due to the fact that I tend to",
"Dual Extrusion 3D Printer with RepG ([ReplicatorG](http://replicat.org/)), and tonight a print completely detached",
"``` M109 S110 (set build plate temperature) ``` When I manually add the",
"drop in temperature last week is due to the fact that I tend",
"with RepG ([ReplicatorG](http://replicat.org/)), and tonight a print completely detached from the build plate.",
"some sort. **Edit 3:** I resolved the issue by a fresh install of",
"print bed temp had dropped to 109... and kept dropping. This is new",
"the duration of the print. The drop in temperature last week is due",
"the print. Since there was no M109 the bed plate cooled to ambient",
"extruder temperature) ``` It does not contain a ``` M109 S110 (set build",
"due to the fact that I tend to preheat the printer before actually",
"``` It does not contain a ``` M109 S110 (set build plate temperature)",
"for suggestions on how to troubleshoot the issue. **Edit 1:** Tonight RepG would",
"latest Rep G. I rebuilt the profiles from scratch with G Code to",
"print. The drop in temperature last week is due to the fact that",
"preheat the printer before actually starting the print. Since there was no M109",
"and tonight a print completely detached from the build plate. I reset everything",
"file, the model prints normally, and the build plate temperature holds for the",
"down. **Edit 2:** Examination of the gcode shows the root cause. It does",
"is a simple abs print at 230/110 degrees. A few seconds after start",
"would not connect to the printer. I reseated the USB cord and now",
"temp had dropped to 109... and kept dropping. This is new behavior. I",
"M109 S110 (set build plate temperature) ``` When I manually add the M109",
"tonight a print completely detached from the build plate. I reset everything and",
"There isn't a hardware issue here. Most likely it is a Rep G",
"bed temp had dropped to 109... and kept dropping. This is new behavior.",
"M109 to the gcode file, the model prints normally, and the build plate",
"Pᴀᴜʟsᴛᴇʀ2/Oscar Once the print starts the print bed begins cooling. It is cooling",
"rebuilt the profiles from scratch with G Code to set the correct bed",
"10, h = 2); cylinder(d = 9, h = 2); } ``` Pᴀᴜʟsᴛᴇʀ2/Oscar",
"it does. The test print is ABS at 230/110 from this open scad.",
"after start of print, I noticed that the print bed temp had dropped",
"there was no M109 the bed plate cooled to ambient temperature. There isn't",
"print bed begins cooling. It is cooling before any filament is laid down.",
"profiles from scratch with G Code to set the correct bed temp. Thank",
"I tend to preheat the printer before actually starting the print. Since there",
"temperature) ``` When I manually add the M109 to the gcode file, the",
"the latest Rep G. I rebuilt the profiles from scratch with G Code",
"build plate temperature) ``` When I manually add the M109 to the gcode",
"a Rep G configuration error of some sort. **Edit 3:** I resolved the",
"cause. It does contain ``` M104 S230 T1 (set extruder temperature) ``` It",
"the printer. I reseated the USB cord and now it does. The test",
"last week is due to the fact that I tend to preheat the",
"troubleshoot the issue. **Edit 1:** Tonight RepG would not connect to the printer.",
"gcode shows the root cause. It does contain ``` M104 S230 T1 (set",
"is ABS at 230/110 from this open scad. ``` difference() { cylinder(d =",
"behavior. I haven't started to troubleshoot yet. I am looking for suggestions on",
"build plate temperature holds for the duration of the print. The drop in",
"([ReplicatorG](http://replicat.org/)), and tonight a print completely detached from the build plate. I reset",
"print at 230/110 degrees. A few seconds after start of print, I noticed",
"yet. I am looking for suggestions on how to troubleshoot the issue. **Edit",
"cord and now it does. The test print is ABS at 230/110 from",
"1:** Tonight RepG would not connect to the printer. I reseated the USB",
"I haven't started to troubleshoot yet. I am looking for suggestions on how",
"resolved the issue by a fresh install of the latest Rep G. I",
"3D Printer with RepG ([ReplicatorG](http://replicat.org/)), and tonight a print completely detached from the",
"Printer with RepG ([ReplicatorG](http://replicat.org/)), and tonight a print completely detached from the build",
"abs print at 230/110 degrees. A few seconds after start of print, I",
"the print bed temp had dropped to 109... and kept dropping. This is",
"The test print is ABS at 230/110 from this open scad. ``` difference()",
"filament is laid down. **Edit 2:** Examination of the gcode shows the root",
"kept dropping. This is new behavior. I haven't started to troubleshoot yet. I",
"the profiles from scratch with G Code to set the correct bed temp.",
"issue here. Most likely it is a Rep G configuration error of some",
"test print is ABS at 230/110 from this open scad. ``` difference() {",
"shows the root cause. It does contain ``` M104 S230 T1 (set extruder",
"fact that I tend to preheat the printer before actually starting the print.",
"it is a Rep G configuration error of some sort. **Edit 3:** I",
"using a Flashforge Creator Dual Extrusion 3D Printer with RepG ([ReplicatorG](http://replicat.org/)), and tonight",
"the print. The drop in temperature last week is due to the fact",
"9, h = 2); } ``` Pᴀᴜʟsᴛᴇʀ2/Oscar Once the print starts the print",
"scad. ``` difference() { cylinder(d = 10, h = 2); cylinder(d = 9,",
"T1 (set extruder temperature) ``` It does not contain a ``` M109 S110",
"fresh install of the latest Rep G. I rebuilt the profiles from scratch",
"print completely detached from the build plate. I reset everything and watched it",
"does contain ``` M104 S230 T1 (set extruder temperature) ``` It does not",
"Examination of the gcode shows the root cause. It does contain ``` M104",
"G Code to set the correct bed temp. Thank you for your suggestions.",
"reset everything and watched it closely. It is a simple abs print at",
"actually starting the print. Since there was no M109 the bed plate cooled",
"cooling. It is cooling before any filament is laid down. **Edit 2:** Examination",
"plate temperature) ``` When I manually add the M109 to the gcode file,",
"to preheat the printer before actually starting the print. Since there was no",
"h = 2); cylinder(d = 9, h = 2); } ``` Pᴀᴜʟsᴛᴇʀ2/Oscar Once",
"that the print bed temp had dropped to 109... and kept dropping. This",
"new behavior. I haven't started to troubleshoot yet. I am looking for suggestions",
"``` M104 S230 T1 (set extruder temperature) ``` It does not contain a",
"I reset everything and watched it closely. It is a simple abs print",
"temperature) ``` It does not contain a ``` M109 S110 (set build plate",
"with G Code to set the correct bed temp. Thank you for your",
"This is new behavior. I haven't started to troubleshoot yet. I am looking",
"(set build plate temperature) ``` When I manually add the M109 to the",
"Rep G. I rebuilt the profiles from scratch with G Code to set",
"print is ABS at 230/110 from this open scad. ``` difference() { cylinder(d",
"``` difference() { cylinder(d = 10, h = 2); cylinder(d = 9, h",
"from this open scad. ``` difference() { cylinder(d = 10, h = 2);",
"the gcode shows the root cause. It does contain ``` M104 S230 T1",
"for the duration of the print. The drop in temperature last week is",
"start of print, I noticed that the print bed temp had dropped to",
"duration of the print. The drop in temperature last week is due to",
"The drop in temperature last week is due to the fact that I",
"it closely. It is a simple abs print at 230/110 degrees. A few",
"issue. **Edit 1:** Tonight RepG would not connect to the printer. I reseated",
"contain a ``` M109 S110 (set build plate temperature) ``` When I manually",
"I am using a Flashforge Creator Dual Extrusion 3D Printer with RepG ([ReplicatorG](http://replicat.org/)),",
"**Edit 2:** Examination of the gcode shows the root cause. It does contain",
"the fact that I tend to preheat the printer before actually starting the",
"``` Pᴀᴜʟsᴛᴇʀ2/Oscar Once the print starts the print bed begins cooling. It is",
"that I tend to preheat the printer before actually starting the print. Since",
"ambient temperature. There isn't a hardware issue here. Most likely it is a",
"print, I noticed that the print bed temp had dropped to 109... and",
"bed plate cooled to ambient temperature. There isn't a hardware issue here. Most",
"M109 the bed plate cooled to ambient temperature. There isn't a hardware issue",
"the bed plate cooled to ambient temperature. There isn't a hardware issue here.",
"model prints normally, and the build plate temperature holds for the duration of",
"S230 T1 (set extruder temperature) ``` It does not contain a ``` M109",
"USB cord and now it does. The test print is ABS at 230/110",
"likely it is a Rep G configuration error of some sort. **Edit 3:**",
"the build plate. I reset everything and watched it closely. It is a"
] |
[
"between a successful first test and all the messes). I am storing the",
"coupling#3](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\")](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\") YouTube videos, that I",
"humidity. still basically stumped!* **EDIT 2**: (Additional information posted as comment, now moved",
"sliced in Cura. As that doesn't have a tornado driver, I downloaded one",
"a new Tevo Tornado, which I have completed two good prints with, a",
"it was my poor design skills or the printer and that came out",
"relieved bed - done to ridiculous degree of accuracy, cold gross levelling then",
"printer was capable of producing a good print. Print 3 was a design",
"Tevo Tornado, which I have completed two good prints with, a 20x20 test",
"( isopropyl) I don't think I have ever put a finger on the",
"conditions between a successful first test and all the messes). I am storing",
"no acceleration. I assume there is a default in the Marlin firmware.. there",
"for your observation, it's a new bed and I clean down with alcohol",
"badly, very disappointing holes missing. Stringing gaps between material just rubbish. I downloaded",
"successful first test and all the messes). I am storing the PLA in",
"maybe a materials property issue, but then again no difference in conditions between",
"going to get a glass bed in part to deal with the protruding",
"the g-code from the test print was from an unknown slicer, no doubt",
"this is what I have found and tried: * 1 relieved bed -",
"hotter nor colder (it's 30°C and humid at the moment, so maybe a",
"degree of accuracy, cold gross levelling then bed and nozzle at PLA working",
"started properly, see pictures for example. I might be going down rabbit holes",
"[![z axis flexible coupling#3](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\")](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\") YouTube",
"**EDIT 1**: (Additional information posted as comment, now moved to question) *The print",
"putting prints on to unused parts of the bed. You are right the",
"the extruder nozzle almost straight away.* *The main differences and there are not",
"I say this to note that the printer was capable of producing a",
"0.1 mm, 0.15 mm, 0.2 mm Now I have added to the suspicion",
"do. Replacing it with a better one can't help. Other things I have",
"coupling#1\")[![z axis flexible coupling#2](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\")](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\") [![z",
"aborted, and I also thought perhaps a residue from the feeler gauges had",
"isopropyl) I don't think I have ever put a finger on the bed",
"have thought about - PLA temps - I have gone up the whole",
"a G92 E0 G1 F7200 the feed rates are different the cura print",
"has to impart their knowledge. **EDIT 1**: (Additional information posted as comment, now",
"the printer was capable of producing a good print. Print 3 was a",
"completed two good prints with, a 20x20 test cube from the supplied SD",
"done 0.1 mm, 0.15 mm, 0.2 mm Now I have added to the",
"E0 G1 F1500 E-3.5 before starting layer 0 (both set z0,3). The test",
"else to do. Replacing it with a better one can't help. Other things",
"knowledge. **EDIT 1**: (Additional information posted as comment, now moved to question) *The",
"to question) *The print bed is brand new from Tevo the unit has",
"humid at the moment, so maybe a materials property issue, but then again",
"a successful first test and all the messes). I am storing the PLA",
"(Additional information posted as comment, now moved to question) *Thanks for your observation,",
"say this to note that the printer was capable of producing a good",
"sliced by cura. I have since tried the original test piece and it",
"no difference I have also done some bed changes but neither hotter nor",
"nozzle at PLA working temp using feeler gauges. I have done 0.1 mm,",
"bead box to reduce humidity. still basically stumped!* **EDIT 2**: (Additional information posted",
"where dots stick and joins don't.* *I am going to change the coupler",
"bed is brand new from Tevo the unit has only done a few",
"1**: (Additional information posted as comment, now moved to question) *The print bed",
"to change the coupler because, well, I don't know what else to do.",
"the Cura code does a G92 E0 G1 F1500 E-3.5 before starting layer",
"rabbit holes here but this is what I have found and tried: *",
"unused parts of the bed. You are right the g-code from the test",
"the time anyone has to impart their knowledge. **EDIT 1**: (Additional information posted",
"differences and there are not many between the set up parts, are that",
"their knowledge. **EDIT 1**: (Additional information posted as comment, now moved to question)",
"contaminated the bed, but I have cleaned it with alcohol wipes and also",
"not the bed, anyway I am going to get a glass bed in",
"and humid at the moment, so maybe a materials property issue, but then",
"am going to change the coupler because, well, I don't know what else",
"as poorly: lots of strings between details. Both of these were sliced in",
"doubt tuned by the manufacturer the part I designed in Fusion was sliced",
"print sets M204 S500 and the test sample sets no acceleration. I assume",
"flexible coupling#2\")](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\") [![z axis flexible coupling#3](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible",
"not a spring - any thoughts? I would certainly appreciate the time anyone",
"sets M204 S500 and the test sample sets no acceleration. I assume there",
"- PLA temps - I have gone up the whole range according to",
"ridiculous degree of accuracy, cold gross levelling then bed and nozzle at PLA",
"cleaned it with alcohol wipes and also tried putting prints on to unused",
"degree increments no difference I have also done some bed changes but neither",
"my poor design skills or the printer and that came out just as",
"in conditions between a successful first test and all the messes). I am",
"gaps between material just rubbish. I downloaded a simple print from Thingiverse just",
"it with alcohol wipes and also tried putting prints on to unused parts",
"don't know what I am talking about on the one hand I am",
"axis flexible coupling#2](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\")](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\") [![z axis",
"away.* *The main differences and there are not many between the set up",
"it printed badly, very disappointing holes missing. Stringing gaps between material just rubbish.",
"bed, but I have cleaned it with alcohol wipes and also tried putting",
"sample sets no acceleration. I assume there is a default in the Marlin",
"have found and tried: * 1 relieved bed - done to ridiculous degree",
"have a tornado driver, I downloaded one from the support group and the",
"3 was a design I created in Fusion and it printed badly, very",
"direction changes do not kind of like join the dots where dots stick",
"a new bed and I clean down with alcohol wipes ( isopropyl) I",
"this to note that the printer was capable of producing a good print.",
"in Fusion was sliced by cura. I have since tried the original test",
"gel bead box to reduce humidity. still basically stumped!* **EDIT 2**: (Additional information",
"was from an unknown slicer, no doubt tuned by the manufacturer the part",
"are that the Cura code does a G92 E0 G1 F1500 E-3.5 before",
"basically stumped!* **EDIT 2**: (Additional information posted as comment, now moved to question)",
"pictures for example. I might be going down rabbit holes here but this",
"from the feeler gauges had contaminated the bed, but I have cleaned it",
"test piece and it fouls the extruder nozzle almost straight away.* *The main",
"do not kind of like join the dots where dots stick and joins",
"I don't know what I am talking about on the one hand I",
"a good print. Print 3 was a design I created in Fusion and",
"the moment, so maybe a materials property issue, but then again no difference",
"am talking about on the one hand I am semi convinced it is",
"box to reduce humidity. still basically stumped!* **EDIT 2**: (Additional information posted as",
"spool holder also from the SD. I say this to note that the",
"a gel bead box to reduce humidity. still basically stumped!* **EDIT 2**: (Additional",
"by cura. I have since tried the original test piece and it fouls",
"piece and it fouls the extruder nozzle almost straight away.* *The main differences",
"very aware of that. While I don't know what I am talking about",
"*The main differences and there are not many between the set up parts,",
"on to unused parts of the bed. You are right the g-code from",
"bandwidth in 5 degree increments no difference I have also done some bed",
"changes do not kind of like join the dots where dots stick and",
"I don't know what else to do. Replacing it with a better one",
"and it fouls the extruder nozzle almost straight away.* *The main differences and",
"I have seen, show couplers that are not a spring - any thoughts?",
"from the supplied SD and the spool holder also from the SD. I",
"that. While I don't know what I am talking about on the one",
"S500 and the test sample sets no acceleration. I assume there is a",
"the feeler gauges had contaminated the bed, but I have cleaned it with",
"printer and that came out just as poorly: lots of strings between details.",
"has only done a few prints most aborted, and I also thought perhaps",
"mm, 0.2 mm Now I have added to the suspicion the z axis",
"but the extrusion between direction changes do not kind of like join the",
"materials property issue, but then again no difference in conditions between a successful",
"new Tevo Tornado, which I have completed two good prints with, a 20x20",
"flexible coupling#2](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\")](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\") [![z axis flexible",
"unknown slicer, no doubt tuned by the manufacturer the part I designed in",
"F7200 the feed rates are different the cura print sets M204 S500 and",
"there is no doubt some globs of PLA stick like in dots between",
"bed changes but neither hotter nor colder (it's 30°C and humid at the",
"the strings, but the extrusion between direction changes do not kind of like",
"tried: * 1 relieved bed - done to ridiculous degree of accuracy, cold",
"different the cura print sets M204 S500 and the test sample sets no",
"am storing the PLA in a gel bead box to reduce humidity. still",
"G1 F1500 E-3.5 before starting layer 0 (both set z0,3). The test piece",
"a residue from the feeler gauges had contaminated the bed, but I have",
"issue, but then again no difference in conditions between a successful first test",
"strings, but the extrusion between direction changes do not kind of like join",
"just as poorly: lots of strings between details. Both of these were sliced",
"set up parts, are that the Cura code does a G92 E0 G1",
"things I have thought about - PLA temps - I have gone up",
"is no doubt some globs of PLA stick like in dots between the",
"I might be going down rabbit holes here but this is what I",
"as comment, now moved to question) *Thanks for your observation, it's a new",
"new bed and I clean down with alcohol wipes ( isopropyl) I don't",
"in Cura. As that doesn't have a tornado driver, I downloaded one from",
"videos, that I have seen, show couplers that are not a spring -",
"then bed and nozzle at PLA working temp using feeler gauges. I have",
"are not many between the set up parts, are that the Cura code",
"if it was my poor design skills or the printer and that came",
"working temp using feeler gauges. I have done 0.1 mm, 0.15 mm, 0.2",
"- I have gone up the whole range according to the manufacturers bandwidth",
"Cura. As that doesn't have a tornado driver, I downloaded one from the",
"few prints most aborted, and I also thought perhaps a residue from the",
"holes missing. Stringing gaps between material just rubbish. I downloaded a simple print",
"G92 E0 G1 F1500 E-3.5 before starting layer 0 (both set z0,3). The",
"posted as comment, now moved to question) *Thanks for your observation, it's a",
"I would certainly appreciate the time anyone has to impart their knowledge. **EDIT",
"part I designed in Fusion was sliced by cura. I have since tried",
"poorly: lots of strings between details. Both of these were sliced in Cura.",
"accuracy, cold gross levelling then bed and nozzle at PLA working temp using",
"I have done 0.1 mm, 0.15 mm, 0.2 mm Now I have added",
"of that. While I don't know what I am talking about on the",
"mm, 0.15 mm, 0.2 mm Now I have added to the suspicion the",
"the PLA in a gel bead box to reduce humidity. still basically stumped!*",
"out just as poorly: lots of strings between details. Both of these were",
"coupling#1](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")[![z axis flexible coupling#2](https://i.stack.imgur.com/KAWNmm.jpg \"z",
"have seen, show couplers that are not a spring - any thoughts? I",
"to unused parts of the bed. You are right the g-code from the",
"main differences and there are not many between the set up parts, are",
"\"z axis flexible coupling#3\") YouTube videos, that I have seen, show couplers that",
"two good prints with, a 20x20 test cube from the supplied SD and",
"flexible coupling#1\")](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")[![z axis flexible coupling#2](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\")](https://i.stack.imgur.com/KAWNmm.jpg",
"Stringing gaps between material just rubbish. I downloaded a simple print from Thingiverse",
"moment, so maybe a materials property issue, but then again no difference in",
"and all the messes). I am storing the PLA in a gel bead",
"semi convinced it is not the bed, anyway I am going to get",
"\"z axis flexible coupling#2\")](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\") [![z axis flexible coupling#3](https://i.stack.imgur.com/djWvKm.jpg \"z",
"prints most aborted, and I also thought perhaps a residue from the feeler",
"g-code from the test print was from an unknown slicer, no doubt tuned",
"set z0,3). The test piece just does a G92 E0 G1 F7200 the",
"designed in Fusion was sliced by cura. I have since tried the original",
"know what I am talking about on the one hand I am semi",
"0.15 mm, 0.2 mm Now I have added to the suspicion the z",
"rubbish. I downloaded a simple print from Thingiverse just to see if it",
"- very aware of that. While I don't know what I am talking",
"kind of like join the dots where dots stick and joins don't.* *I",
"extrusion between direction changes do not kind of like join the dots where",
"put a finger on the bed - very aware of that. While I",
"spring - any thoughts? I would certainly appreciate the time anyone has to",
"I designed in Fusion was sliced by cura. I have since tried the",
"with, a 20x20 test cube from the supplied SD and the spool holder",
"the printer and that came out just as poorly: lots of strings between",
"\"z axis flexible coupling#1\")](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")[![z axis flexible coupling#2](https://i.stack.imgur.com/KAWNmm.jpg \"z axis",
"SD and the spool holder also from the SD. I say this to",
"the bed, anyway I am going to get a glass bed in part",
"of producing a good print. Print 3 was a design I created in",
"aware of that. While I don't know what I am talking about on",
"downloaded a simple print from Thingiverse just to see if it was my",
"down with alcohol wipes ( isopropyl) I don't think I have ever put",
"- done to ridiculous degree of accuracy, cold gross levelling then bed and",
"have gone up the whole range according to the manufacturers bandwidth in 5",
"see images below: [![z axis flexible coupling#1](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")](https://i.stack.imgur.com/KX2DWm.jpg \"z axis",
"a glass bed in part to deal with the protruding screw head issue.*",
"good prints with, a 20x20 test cube from the supplied SD and the",
"or the printer and that came out just as poorly: lots of strings",
"design skills or the printer and that came out just as poorly: lots",
"but then again no difference in conditions between a successful first test and",
"from the SD. I say this to note that the printer was capable",
"the test print was from an unknown slicer, no doubt tuned by the",
"between details. Both of these were sliced in Cura. As that doesn't have",
"that the Cura code does a G92 E0 G1 F1500 E-3.5 before starting",
"Other things I have thought about - PLA temps - I have gone",
"done to ridiculous degree of accuracy, cold gross levelling then bed and nozzle",
"simple print from Thingiverse just to see if it was my poor design",
"question) *The print bed is brand new from Tevo the unit has only",
"supplied SD and the spool holder also from the SD. I say this",
"it with a better one can't help. Other things I have thought about",
"see pictures for example. I might be going down rabbit holes here but",
"alcohol wipes ( isopropyl) I don't think I have ever put a finger",
"coupling#1\")](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")[![z axis flexible coupling#2](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\")](https://i.stack.imgur.com/KAWNmm.jpg \"z",
"The test piece just does a G92 E0 G1 F7200 the feed rates",
"am going to get a glass bed in part to deal with the",
"from Thingiverse just to see if it was my poor design skills or",
"reduce humidity. still basically stumped!* **EDIT 2**: (Additional information posted as comment, now",
"one can't help. Other things I have thought about - PLA temps -",
"prints on to unused parts of the bed. You are right the g-code",
"also from the SD. I say this to note that the printer was",
"for example. I might be going down rabbit holes here but this is",
"z axis coupler see images below: [![z axis flexible coupling#1](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible",
"gauges had contaminated the bed, but I have cleaned it with alcohol wipes",
"coupling#2](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\")](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\") [![z axis flexible coupling#3](https://i.stack.imgur.com/djWvKm.jpg",
"to question) *Thanks for your observation, it's a new bed and I clean",
"on the one hand I am semi convinced it is not the bed,",
"certainly appreciate the time anyone has to impart their knowledge. **EDIT 1**: (Additional",
"appreciate the time anyone has to impart their knowledge. **EDIT 1**: (Additional information",
"a materials property issue, but then again no difference in conditions between a",
"* 1 relieved bed - done to ridiculous degree of accuracy, cold gross",
"bed and I clean down with alcohol wipes ( isopropyl) I don't think",
"poor design skills or the printer and that came out just as poorly:",
"your observation, it's a new bed and I clean down with alcohol wipes",
"tornado driver, I downloaded one from the support group and the prints have",
"created in Fusion and it printed badly, very disappointing holes missing. Stringing gaps",
"was my poor design skills or the printer and that came out just",
"like in dots between the strings, but the extrusion between direction changes do",
"have done 0.1 mm, 0.15 mm, 0.2 mm Now I have added to",
"YouTube videos, that I have seen, show couplers that are not a spring",
"I have found and tried: * 1 relieved bed - done to ridiculous",
"levelling then bed and nozzle at PLA working temp using feeler gauges. I",
"\"z axis flexible coupling#2\") [![z axis flexible coupling#3](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\")](https://i.stack.imgur.com/djWvKm.jpg \"z",
"tried putting prints on to unused parts of the bed. You are right",
"manufacturer the part I designed in Fusion was sliced by cura. I have",
"between the set up parts, are that the Cura code does a G92",
"flexible coupling#3](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\")](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\") YouTube videos, that",
"print was from an unknown slicer, no doubt tuned by the manufacturer the",
"one from the support group and the prints have not even started properly,",
"in a gel bead box to reduce humidity. still basically stumped!* **EDIT 2**:",
"coupling#2\") [![z axis flexible coupling#3](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\")](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\")",
"also thought perhaps a residue from the feeler gauges had contaminated the bed,",
"slicer, no doubt tuned by the manufacturer the part I designed in Fusion",
"to get a glass bed in part to deal with the protruding screw",
"gauges. I have done 0.1 mm, 0.15 mm, 0.2 mm Now I have",
"unit has only done a few prints most aborted, and I also thought",
"piece just does a G92 E0 G1 F7200 the feed rates are different",
"skills or the printer and that came out just as poorly: lots of",
"still basically stumped!* **EDIT 2**: (Additional information posted as comment, now moved to",
"am semi convinced it is not the bed, anyway I am going to",
"the manufacturers bandwidth in 5 degree increments no difference I have also done",
"I am going to get a glass bed in part to deal with",
"get a glass bed in part to deal with the protruding screw head",
"thought about - PLA temps - I have gone up the whole range",
"have ever put a finger on the bed - very aware of that.",
"information posted as comment, now moved to question) *The print bed is brand",
"Print 3 was a design I created in Fusion and it printed badly,",
"axis coupler see images below: [![z axis flexible coupling#1](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")](https://i.stack.imgur.com/KX2DWm.jpg",
"there are not many between the set up parts, are that the Cura",
"lots of strings between details. Both of these were sliced in Cura. As",
"is brand new from Tevo the unit has only done a few prints",
"don't think I have ever put a finger on the bed - very",
"the SD. I say this to note that the printer was capable of",
"brand new from Tevo the unit has only done a few prints most",
"about on the one hand I am semi convinced it is not the",
"joins don't.* *I am going to change the coupler because, well, I don't",
"ever put a finger on the bed - very aware of that. While",
"I don't think I have ever put a finger on the bed -",
"any thoughts? I would certainly appreciate the time anyone has to impart their",
"holes here but this is what I have found and tried: * 1",
"with a better one can't help. Other things I have thought about -",
"test sample sets no acceleration. I assume there is a default in the",
"and nozzle at PLA working temp using feeler gauges. I have done 0.1",
"the suspicion the z axis coupler see images below: [![z axis flexible coupling#1](https://i.stack.imgur.com/KX2DWm.jpg",
"default in the Marlin firmware.. there is no doubt some globs of PLA",
"material just rubbish. I downloaded a simple print from Thingiverse just to see",
"Cura code does a G92 E0 G1 F1500 E-3.5 before starting layer 0",
"the prints have not even started properly, see pictures for example. I might",
"but I have cleaned it with alcohol wipes and also tried putting prints",
"have also done some bed changes but neither hotter nor colder (it's 30°C",
"layer 0 (both set z0,3). The test piece just does a G92 E0",
"between direction changes do not kind of like join the dots where dots",
"*I am going to change the coupler because, well, I don't know what",
"missing. Stringing gaps between material just rubbish. I downloaded a simple print from",
"no doubt some globs of PLA stick like in dots between the strings,",
"SD. I say this to note that the printer was capable of producing",
"a simple print from Thingiverse just to see if it was my poor",
"G92 E0 G1 F7200 the feed rates are different the cura print sets",
"an unknown slicer, no doubt tuned by the manufacturer the part I designed",
"then again no difference in conditions between a successful first test and all",
"of accuracy, cold gross levelling then bed and nozzle at PLA working temp",
"came out just as poorly: lots of strings between details. Both of these",
"of like join the dots where dots stick and joins don't.* *I am",
"Fusion was sliced by cura. I have since tried the original test piece",
"G1 F7200 the feed rates are different the cura print sets M204 S500",
"and also tried putting prints on to unused parts of the bed. You",
"colder (it's 30°C and humid at the moment, so maybe a materials property",
"to note that the printer was capable of producing a good print. Print",
"I have added to the suspicion the z axis coupler see images below:",
"0 (both set z0,3). The test piece just does a G92 E0 G1",
"I am semi convinced it is not the bed, anyway I am going",
"example. I might be going down rabbit holes here but this is what",
"the original test piece and it fouls the extruder nozzle almost straight away.*",
"axis flexible coupling#1\")[![z axis flexible coupling#2](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\")](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible",
"the z axis coupler see images below: [![z axis flexible coupling#1](https://i.stack.imgur.com/KX2DWm.jpg \"z axis",
"are not a spring - any thoughts? I would certainly appreciate the time",
"gross levelling then bed and nozzle at PLA working temp using feeler gauges.",
"only done a few prints most aborted, and I also thought perhaps a",
"starting layer 0 (both set z0,3). The test piece just does a G92",
"very disappointing holes missing. Stringing gaps between material just rubbish. I downloaded a",
"whole range according to the manufacturers bandwidth in 5 degree increments no difference",
"holder also from the SD. I say this to note that the printer",
"note that the printer was capable of producing a good print. Print 3",
"the spool holder also from the SD. I say this to note that",
"up parts, are that the Cura code does a G92 E0 G1 F1500",
"had contaminated the bed, but I have cleaned it with alcohol wipes and",
"print bed is brand new from Tevo the unit has only done a",
"I downloaded a simple print from Thingiverse just to see if it was",
"to the manufacturers bandwidth in 5 degree increments no difference I have also",
"a design I created in Fusion and it printed badly, very disappointing holes",
"design I created in Fusion and it printed badly, very disappointing holes missing.",
"observation, it's a new bed and I clean down with alcohol wipes (",
"according to the manufacturers bandwidth in 5 degree increments no difference I have",
"one hand I am semi convinced it is not the bed, anyway I",
"I have thought about - PLA temps - I have gone up the",
"a 20x20 test cube from the supplied SD and the spool holder also",
"the supplied SD and the spool holder also from the SD. I say",
"a spring - any thoughts? I would certainly appreciate the time anyone has",
"between the strings, but the extrusion between direction changes do not kind of",
"about - PLA temps - I have gone up the whole range according",
"flexible coupling#1](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")[![z axis flexible coupling#2](https://i.stack.imgur.com/KAWNmm.jpg",
"comment, now moved to question) *Thanks for your observation, it's a new bed",
"help. Other things I have thought about - PLA temps - I have",
"producing a good print. Print 3 was a design I created in Fusion",
"good print. Print 3 was a design I created in Fusion and it",
"dots stick and joins don't.* *I am going to change the coupler because,",
"to ridiculous degree of accuracy, cold gross levelling then bed and nozzle at",
"also tried putting prints on to unused parts of the bed. You are",
"I created in Fusion and it printed badly, very disappointing holes missing. Stringing",
"stick like in dots between the strings, but the extrusion between direction changes",
"to do. Replacing it with a better one can't help. Other things I",
"coupling#3\")](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\") YouTube videos, that I have seen, show couplers",
"are right the g-code from the test print was from an unknown slicer,",
"bed and nozzle at PLA working temp using feeler gauges. I have done",
"printed badly, very disappointing holes missing. Stringing gaps between material just rubbish. I",
"I have gone up the whole range according to the manufacturers bandwidth in",
"temps - I have gone up the whole range according to the manufacturers",
"now moved to question) *Thanks for your observation, it's a new bed and",
"with alcohol wipes ( isopropyl) I don't think I have ever put a",
"I have ever put a finger on the bed - very aware of",
"the bed - very aware of that. While I don't know what I",
"and tried: * 1 relieved bed - done to ridiculous degree of accuracy,",
"of the bed. You are right the g-code from the test print was",
"does a G92 E0 G1 F1500 E-3.5 before starting layer 0 (both set",
"know what else to do. Replacing it with a better one can't help.",
"talking about on the one hand I am semi convinced it is not",
"stumped!* **EDIT 2**: (Additional information posted as comment, now moved to question) *Thanks",
"the bed. You are right the g-code from the test print was from",
"from an unknown slicer, no doubt tuned by the manufacturer the part I",
"capable of producing a good print. Print 3 was a design I created",
"cold gross levelling then bed and nozzle at PLA working temp using feeler",
"z0,3). The test piece just does a G92 E0 G1 F7200 the feed",
"but this is what I have found and tried: * 1 relieved bed",
"below: [![z axis flexible coupling#1](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")[![z",
"original test piece and it fouls the extruder nozzle almost straight away.* *The",
"wipes ( isopropyl) I don't think I have ever put a finger on",
"coupler see images below: [![z axis flexible coupling#1](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")](https://i.stack.imgur.com/KX2DWm.jpg \"z",
"some bed changes but neither hotter nor colder (it's 30°C and humid at",
"Thingiverse just to see if it was my poor design skills or the",
"anyway I am going to get a glass bed in part to deal",
"think I have ever put a finger on the bed - very aware",
"Fusion and it printed badly, very disappointing holes missing. Stringing gaps between material",
"the set up parts, are that the Cura code does a G92 E0",
"the test sample sets no acceleration. I assume there is a default in",
"the one hand I am semi convinced it is not the bed, anyway",
"coupling#2\")](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\") [![z axis flexible coupling#3](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\")](https://i.stack.imgur.com/djWvKm.jpg",
"that are not a spring - any thoughts? I would certainly appreciate the",
"PLA temps - I have gone up the whole range according to the",
"what I am talking about on the one hand I am semi convinced",
"axis flexible coupling#1\")](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")[![z axis flexible coupling#2](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible",
"sets no acceleration. I assume there is a default in the Marlin firmware..",
"like join the dots where dots stick and joins don't.* *I am going",
"again no difference in conditions between a successful first test and all the",
"here but this is what I have found and tried: * 1 relieved",
"images below: [![z axis flexible coupling#1](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible",
"difference in conditions between a successful first test and all the messes). I",
"flexible coupling#1\")[![z axis flexible coupling#2](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\")](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\")",
"changes but neither hotter nor colder (it's 30°C and humid at the moment,",
"messes). I am storing the PLA in a gel bead box to reduce",
"as comment, now moved to question) *The print bed is brand new from",
"I assume there is a default in the Marlin firmware.. there is no",
"group and the prints have not even started properly, see pictures for example.",
"done some bed changes but neither hotter nor colder (it's 30°C and humid",
"comment, now moved to question) *The print bed is brand new from Tevo",
"bed. You are right the g-code from the test print was from an",
"residue from the feeler gauges had contaminated the bed, but I have cleaned",
"flexible coupling#3\")](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\") YouTube videos, that I have seen, show",
"all the messes). I am storing the PLA in a gel bead box",
"question) *Thanks for your observation, it's a new bed and I clean down",
"information posted as comment, now moved to question) *Thanks for your observation, it's",
"some globs of PLA stick like in dots between the strings, but the",
"between material just rubbish. I downloaded a simple print from Thingiverse just to",
"parts, are that the Cura code does a G92 E0 G1 F1500 E-3.5",
"print from Thingiverse just to see if it was my poor design skills",
"extruder nozzle almost straight away.* *The main differences and there are not many",
"the coupler because, well, I don't know what else to do. Replacing it",
"feed rates are different the cura print sets M204 S500 and the test",
"the whole range according to the manufacturers bandwidth in 5 degree increments no",
"I have cleaned it with alcohol wipes and also tried putting prints on",
"almost straight away.* *The main differences and there are not many between the",
"finger on the bed - very aware of that. While I don't know",
"Both of these were sliced in Cura. As that doesn't have a tornado",
"at PLA working temp using feeler gauges. I have done 0.1 mm, 0.15",
"flexible coupling#3\") YouTube videos, that I have seen, show couplers that are not",
"a G92 E0 G1 F1500 E-3.5 before starting layer 0 (both set z0,3).",
"dots where dots stick and joins don't.* *I am going to change the",
"5 degree increments no difference I have also done some bed changes but",
"fouls the extruder nozzle almost straight away.* *The main differences and there are",
"well, I don't know what else to do. Replacing it with a better",
"difference I have also done some bed changes but neither hotter nor colder",
"test print was from an unknown slicer, no doubt tuned by the manufacturer",
"M204 S500 and the test sample sets no acceleration. I assume there is",
"coupler because, well, I don't know what else to do. Replacing it with",
"doesn't have a tornado driver, I downloaded one from the support group and",
"going to change the coupler because, well, I don't know what else to",
"in Fusion and it printed badly, very disappointing holes missing. Stringing gaps between",
"have cleaned it with alcohol wipes and also tried putting prints on to",
"up the whole range according to the manufacturers bandwidth in 5 degree increments",
"the bed, but I have cleaned it with alcohol wipes and also tried",
"just to see if it was my poor design skills or the printer",
"I am storing the PLA in a gel bead box to reduce humidity.",
"storing the PLA in a gel bead box to reduce humidity. still basically",
"show couplers that are not a spring - any thoughts? I would certainly",
"see if it was my poor design skills or the printer and that",
"the feed rates are different the cura print sets M204 S500 and the",
"so maybe a materials property issue, but then again no difference in conditions",
"test piece just does a G92 E0 G1 F7200 the feed rates are",
"globs of PLA stick like in dots between the strings, but the extrusion",
"alcohol wipes and also tried putting prints on to unused parts of the",
"what else to do. Replacing it with a better one can't help. Other",
"and joins don't.* *I am going to change the coupler because, well, I",
"can't help. Other things I have thought about - PLA temps - I",
"E-3.5 before starting layer 0 (both set z0,3). The test piece just does",
"to reduce humidity. still basically stumped!* **EDIT 2**: (Additional information posted as comment,",
"I clean down with alcohol wipes ( isopropyl) I don't think I have",
"might be going down rabbit holes here but this is what I have",
"You are right the g-code from the test print was from an unknown",
"down rabbit holes here but this is what I have found and tried:",
"mm Now I have added to the suspicion the z axis coupler see",
"doubt some globs of PLA stick like in dots between the strings, but",
"it is not the bed, anyway I am going to get a glass",
"what I have found and tried: * 1 relieved bed - done to",
"join the dots where dots stick and joins don't.* *I am going to",
"increments no difference I have also done some bed changes but neither hotter",
"wipes and also tried putting prints on to unused parts of the bed.",
"Replacing it with a better one can't help. Other things I have thought",
"couplers that are not a spring - any thoughts? I would certainly appreciate",
"acceleration. I assume there is a default in the Marlin firmware.. there is",
"don't.* *I am going to change the coupler because, well, I don't know",
"many between the set up parts, are that the Cura code does a",
"assume there is a default in the Marlin firmware.. there is no doubt",
"details. Both of these were sliced in Cura. As that doesn't have a",
"cube from the supplied SD and the spool holder also from the SD.",
"going down rabbit holes here but this is what I have found and",
"rates are different the cura print sets M204 S500 and the test sample",
"these were sliced in Cura. As that doesn't have a tornado driver, I",
"F1500 E-3.5 before starting layer 0 (both set z0,3). The test piece just",
"axis flexible coupling#1](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")[![z axis flexible",
"I also thought perhaps a residue from the feeler gauges had contaminated the",
"thought perhaps a residue from the feeler gauges had contaminated the bed, but",
"was a design I created in Fusion and it printed badly, very disappointing",
"no difference in conditions between a successful first test and all the messes).",
"not many between the set up parts, are that the Cura code does",
"As that doesn't have a tornado driver, I downloaded one from the support",
"properly, see pictures for example. I might be going down rabbit holes here",
"better one can't help. Other things I have thought about - PLA temps",
"have a new Tevo Tornado, which I have completed two good prints with,",
"and the spool holder also from the SD. I say this to note",
"Tevo the unit has only done a few prints most aborted, and I",
"a better one can't help. Other things I have thought about - PLA",
"20x20 test cube from the supplied SD and the spool holder also from",
"gone up the whole range according to the manufacturers bandwidth in 5 degree",
"*Thanks for your observation, it's a new bed and I clean down with",
"I am talking about on the one hand I am semi convinced it",
"at the moment, so maybe a materials property issue, but then again no",
"manufacturers bandwidth in 5 degree increments no difference I have also done some",
"the cura print sets M204 S500 and the test sample sets no acceleration.",
"new from Tevo the unit has only done a few prints most aborted,",
"support group and the prints have not even started properly, see pictures for",
"bed - very aware of that. While I don't know what I am",
"PLA stick like in dots between the strings, but the extrusion between direction",
"a few prints most aborted, and I also thought perhaps a residue from",
"the extrusion between direction changes do not kind of like join the dots",
"be going down rabbit holes here but this is what I have found",
"impart their knowledge. **EDIT 1**: (Additional information posted as comment, now moved to",
"**EDIT 2**: (Additional information posted as comment, now moved to question) *Thanks for",
"(it's 30°C and humid at the moment, so maybe a materials property issue,",
"the support group and the prints have not even started properly, see pictures",
"most aborted, and I also thought perhaps a residue from the feeler gauges",
"tried the original test piece and it fouls the extruder nozzle almost straight",
"0.2 mm Now I have added to the suspicion the z axis coupler",
"Tornado, which I have completed two good prints with, a 20x20 test cube",
"prints have not even started properly, see pictures for example. I might be",
"temp using feeler gauges. I have done 0.1 mm, 0.15 mm, 0.2 mm",
"have added to the suspicion the z axis coupler see images below: [![z",
"in 5 degree increments no difference I have also done some bed changes",
"firmware.. there is no doubt some globs of PLA stick like in dots",
"found and tried: * 1 relieved bed - done to ridiculous degree of",
"I have since tried the original test piece and it fouls the extruder",
"don't know what else to do. Replacing it with a better one can't",
"added to the suspicion the z axis coupler see images below: [![z axis",
"and the prints have not even started properly, see pictures for example. I",
"I have completed two good prints with, a 20x20 test cube from the",
"to impart their knowledge. **EDIT 1**: (Additional information posted as comment, now moved",
"that the printer was capable of producing a good print. Print 3 was",
"- any thoughts? I would certainly appreciate the time anyone has to impart",
"is a default in the Marlin firmware.. there is no doubt some globs",
"that doesn't have a tornado driver, I downloaded one from the support group",
"a tornado driver, I downloaded one from the support group and the prints",
"nor colder (it's 30°C and humid at the moment, so maybe a materials",
"done a few prints most aborted, and I also thought perhaps a residue",
"but neither hotter nor colder (it's 30°C and humid at the moment, so",
"\"z axis flexible coupling#1\")[![z axis flexible coupling#2](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\")](https://i.stack.imgur.com/KAWNmm.jpg \"z axis",
"have completed two good prints with, a 20x20 test cube from the supplied",
"driver, I downloaded one from the support group and the prints have not",
"the Marlin firmware.. there is no doubt some globs of PLA stick like",
"in dots between the strings, but the extrusion between direction changes do not",
"perhaps a residue from the feeler gauges had contaminated the bed, but I",
"convinced it is not the bed, anyway I am going to get a",
"straight away.* *The main differences and there are not many between the set",
"code does a G92 E0 G1 F1500 E-3.5 before starting layer 0 (both",
"even started properly, see pictures for example. I might be going down rabbit",
"cura. I have since tried the original test piece and it fouls the",
"downloaded one from the support group and the prints have not even started",
"moved to question) *Thanks for your observation, it's a new bed and I",
"axis flexible coupling#3](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\")](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\") YouTube videos,",
"hand I am semi convinced it is not the bed, anyway I am",
"by the manufacturer the part I designed in Fusion was sliced by cura.",
"have not even started properly, see pictures for example. I might be going",
"would certainly appreciate the time anyone has to impart their knowledge. **EDIT 1**:",
"is what I have found and tried: * 1 relieved bed - done",
"and I also thought perhaps a residue from the feeler gauges had contaminated",
"PLA working temp using feeler gauges. I have done 0.1 mm, 0.15 mm,",
"were sliced in Cura. As that doesn't have a tornado driver, I downloaded",
"in the Marlin firmware.. there is no doubt some globs of PLA stick",
"just does a G92 E0 G1 F7200 the feed rates are different the",
"axis flexible coupling#2\") [![z axis flexible coupling#3](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\")](https://i.stack.imgur.com/djWvKm.jpg \"z axis",
"coupling#3\") YouTube videos, that I have seen, show couplers that are not a",
"seen, show couplers that are not a spring - any thoughts? I would",
"and the test sample sets no acceleration. I assume there is a default",
"range according to the manufacturers bandwidth in 5 degree increments no difference I",
"right the g-code from the test print was from an unknown slicer, no",
"are different the cura print sets M204 S500 and the test sample sets",
"the dots where dots stick and joins don't.* *I am going to change",
"disappointing holes missing. Stringing gaps between material just rubbish. I downloaded a simple",
"bed - done to ridiculous degree of accuracy, cold gross levelling then bed",
"axis flexible coupling#2\")](https://i.stack.imgur.com/KAWNmm.jpg \"z axis flexible coupling#2\") [![z axis flexible coupling#3](https://i.stack.imgur.com/djWvKm.jpg \"z axis",
"I have a new Tevo Tornado, which I have completed two good prints",
"1 relieved bed - done to ridiculous degree of accuracy, cold gross levelling",
"anyone has to impart their knowledge. **EDIT 1**: (Additional information posted as comment,",
"(Additional information posted as comment, now moved to question) *The print bed is",
"since tried the original test piece and it fouls the extruder nozzle almost",
"Now I have added to the suspicion the z axis coupler see images",
"it fouls the extruder nozzle almost straight away.* *The main differences and there",
"and there are not many between the set up parts, are that the",
"is not the bed, anyway I am going to get a glass bed",
"clean down with alcohol wipes ( isopropyl) I don't think I have ever",
"dots between the strings, but the extrusion between direction changes do not kind",
"*The print bed is brand new from Tevo the unit has only done",
"neither hotter nor colder (it's 30°C and humid at the moment, so maybe",
"prints with, a 20x20 test cube from the supplied SD and the spool",
"test cube from the supplied SD and the spool holder also from the",
"before starting layer 0 (both set z0,3). The test piece just does a",
"a default in the Marlin firmware.. there is no doubt some globs of",
"Marlin firmware.. there is no doubt some globs of PLA stick like in",
"also done some bed changes but neither hotter nor colder (it's 30°C and",
"strings between details. Both of these were sliced in Cura. As that doesn't",
"time anyone has to impart their knowledge. **EDIT 1**: (Additional information posted as",
"2**: (Additional information posted as comment, now moved to question) *Thanks for your",
"flexible coupling#2\") [![z axis flexible coupling#3](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\")](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible",
"suspicion the z axis coupler see images below: [![z axis flexible coupling#1](https://i.stack.imgur.com/KX2DWm.jpg \"z",
"it's a new bed and I clean down with alcohol wipes ( isopropyl)",
"While I don't know what I am talking about on the one hand",
"thoughts? I would certainly appreciate the time anyone has to impart their knowledge.",
"change the coupler because, well, I don't know what else to do. Replacing",
"of strings between details. Both of these were sliced in Cura. As that",
"no doubt tuned by the manufacturer the part I designed in Fusion was",
"to see if it was my poor design skills or the printer and",
"test and all the messes). I am storing the PLA in a gel",
"\"z axis flexible coupling#3\")](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\") YouTube videos, that I have",
"not even started properly, see pictures for example. I might be going down",
"there is a default in the Marlin firmware.. there is no doubt some",
"have since tried the original test piece and it fouls the extruder nozzle",
"which I have completed two good prints with, a 20x20 test cube from",
"[![z axis flexible coupling#1](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")](https://i.stack.imgur.com/KX2DWm.jpg \"z axis flexible coupling#1\")[![z axis",
"was sliced by cura. I have since tried the original test piece and",
"I have also done some bed changes but neither hotter nor colder (it's",
"was capable of producing a good print. Print 3 was a design I",
"from the test print was from an unknown slicer, no doubt tuned by",
"moved to question) *The print bed is brand new from Tevo the unit",
"30°C and humid at the moment, so maybe a materials property issue, but",
"cura print sets M204 S500 and the test sample sets no acceleration. I",
"feeler gauges. I have done 0.1 mm, 0.15 mm, 0.2 mm Now I",
"stick and joins don't.* *I am going to change the coupler because, well,",
"property issue, but then again no difference in conditions between a successful first",
"nozzle almost straight away.* *The main differences and there are not many between",
"first test and all the messes). I am storing the PLA in a",
"I downloaded one from the support group and the prints have not even",
"and that came out just as poorly: lots of strings between details. Both",
"of PLA stick like in dots between the strings, but the extrusion between",
"because, well, I don't know what else to do. Replacing it with a",
"with alcohol wipes and also tried putting prints on to unused parts of",
"E0 G1 F7200 the feed rates are different the cura print sets M204",
"to the suspicion the z axis coupler see images below: [![z axis flexible",
"that came out just as poorly: lots of strings between details. Both of",
"(both set z0,3). The test piece just does a G92 E0 G1 F7200",
"axis flexible coupling#3\") YouTube videos, that I have seen, show couplers that are",
"posted as comment, now moved to question) *The print bed is brand new",
"feeler gauges had contaminated the bed, but I have cleaned it with alcohol",
"the unit has only done a few prints most aborted, and I also",
"from the support group and the prints have not even started properly, see",
"parts of the bed. You are right the g-code from the test print",
"bed, anyway I am going to get a glass bed in part to",
"does a G92 E0 G1 F7200 the feed rates are different the cura",
"just rubbish. I downloaded a simple print from Thingiverse just to see if",
"now moved to question) *The print bed is brand new from Tevo the",
"using feeler gauges. I have done 0.1 mm, 0.15 mm, 0.2 mm Now",
"print. Print 3 was a design I created in Fusion and it printed",
"a finger on the bed - very aware of that. While I don't",
"of these were sliced in Cura. As that doesn't have a tornado driver,",
"PLA in a gel bead box to reduce humidity. still basically stumped!* **EDIT",
"not kind of like join the dots where dots stick and joins don't.*",
"that I have seen, show couplers that are not a spring - any",
"from Tevo the unit has only done a few prints most aborted, and",
"the manufacturer the part I designed in Fusion was sliced by cura. I",
"the messes). I am storing the PLA in a gel bead box to",
"axis flexible coupling#3\")](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\") YouTube videos, that I have seen,",
"and it printed badly, very disappointing holes missing. Stringing gaps between material just",
"tuned by the manufacturer the part I designed in Fusion was sliced by",
"the part I designed in Fusion was sliced by cura. I have since",
"on the bed - very aware of that. While I don't know what",
"and I clean down with alcohol wipes ( isopropyl) I don't think I"
] |
[
"trouble with Print in Place models and I'm trying to find out if",
"to improve my print quality. The printer I am using is a Kossel",
"I'm having trouble with Print in Place models and I'm trying to find",
"if there's something I can do to improve my print quality. The printer",
"calibration * tolerances * precision * accuracy I'm having trouble with Print in",
"I specifically want to test * calibration * tolerances * precision * accuracy",
"trying to find out if there's something I can do to improve my",
"* precision * accuracy I'm having trouble with Print in Place models and",
"can do to improve my print quality. The printer I am using is",
"out if there's something I can do to improve my print quality. The",
"I'm trying to find out if there's something I can do to improve",
"quality. The printer I am using is a Kossel clone, specifically a FLSUN",
"The printer I am using is a Kossel clone, specifically a FLSUN QQ",
"want to test * calibration * tolerances * precision * accuracy I'm having",
"* calibration * tolerances * precision * accuracy I'm having trouble with Print",
"accuracy I'm having trouble with Print in Place models and I'm trying to",
"tolerances * precision * accuracy I'm having trouble with Print in Place models",
"having trouble with Print in Place models and I'm trying to find out",
"Place models and I'm trying to find out if there's something I can",
"models and I'm trying to find out if there's something I can do",
"there's something I can do to improve my print quality. The printer I",
"specifically want to test * calibration * tolerances * precision * accuracy I'm",
"with Print in Place models and I'm trying to find out if there's",
"precision * accuracy I'm having trouble with Print in Place models and I'm",
"I can do to improve my print quality. The printer I am using",
"and I'm trying to find out if there's something I can do to",
"print quality. The printer I am using is a Kossel clone, specifically a",
"to test * calibration * tolerances * precision * accuracy I'm having trouble",
"in Place models and I'm trying to find out if there's something I",
"* tolerances * precision * accuracy I'm having trouble with Print in Place",
"test * calibration * tolerances * precision * accuracy I'm having trouble with",
"I am using is a Kossel clone, specifically a FLSUN QQ and assume",
"something I can do to improve my print quality. The printer I am",
"do to improve my print quality. The printer I am using is a",
"* accuracy I'm having trouble with Print in Place models and I'm trying",
"am using is a Kossel clone, specifically a FLSUN QQ and assume FDM",
"my print quality. The printer I am using is a Kossel clone, specifically",
"using is a Kossel clone, specifically a FLSUN QQ and assume FDM printing.",
"improve my print quality. The printer I am using is a Kossel clone,",
"find out if there's something I can do to improve my print quality.",
"Print in Place models and I'm trying to find out if there's something",
"to find out if there's something I can do to improve my print",
"printer I am using is a Kossel clone, specifically a FLSUN QQ and"
] |
[
"filament, that is suitable for this purpose. The requirements are: 1. Stable at",
"water kettle and am searching for a filament, that is suitable for this",
"for a filament, that is suitable for this purpose. The requirements are: 1.",
"this purpose. The requirements are: 1. Stable at 100°C (212°F) 2. Resistant to",
"(212°F) 2. Resistant to steam/moisture 3. Food-safe Has anyone experimented with this or",
"kettle and am searching for a filament, that is suitable for this purpose.",
"is suitable for this purpose. The requirements are: 1. Stable at 100°C (212°F)",
"1. Stable at 100°C (212°F) 2. Resistant to steam/moisture 3. Food-safe Has anyone",
"purpose. The requirements are: 1. Stable at 100°C (212°F) 2. Resistant to steam/moisture",
"lid of my water kettle and am searching for a filament, that is",
"the lid of my water kettle and am searching for a filament, that",
"requirements are: 1. Stable at 100°C (212°F) 2. Resistant to steam/moisture 3. Food-safe",
"Resistant to steam/moisture 3. Food-safe Has anyone experimented with this or similar purposes?",
"my water kettle and am searching for a filament, that is suitable for",
"I need to replace the lid of my water kettle and am searching",
"am searching for a filament, that is suitable for this purpose. The requirements",
"searching for a filament, that is suitable for this purpose. The requirements are:",
"that is suitable for this purpose. The requirements are: 1. Stable at 100°C",
"and am searching for a filament, that is suitable for this purpose. The",
"replace the lid of my water kettle and am searching for a filament,",
"at 100°C (212°F) 2. Resistant to steam/moisture 3. Food-safe Has anyone experimented with",
"The requirements are: 1. Stable at 100°C (212°F) 2. Resistant to steam/moisture 3.",
"are: 1. Stable at 100°C (212°F) 2. Resistant to steam/moisture 3. Food-safe Has",
"to replace the lid of my water kettle and am searching for a",
"suitable for this purpose. The requirements are: 1. Stable at 100°C (212°F) 2.",
"100°C (212°F) 2. Resistant to steam/moisture 3. Food-safe Has anyone experimented with this",
"of my water kettle and am searching for a filament, that is suitable",
"for this purpose. The requirements are: 1. Stable at 100°C (212°F) 2. Resistant",
"2. Resistant to steam/moisture 3. Food-safe Has anyone experimented with this or similar",
"Stable at 100°C (212°F) 2. Resistant to steam/moisture 3. Food-safe Has anyone experimented",
"a filament, that is suitable for this purpose. The requirements are: 1. Stable",
"need to replace the lid of my water kettle and am searching for"
] |
[
"as I'm trying to print another part, I've run into a situation where",
"description here](https://i.stack.imgur.com/j56yL.png)](https://i.stack.imgur.com/j56yL.png) All I did was use the \"mirror\" feature to put it",
"a better orientation for printing.... Any ideas what's going on here? I'm using",
"for printing.... Any ideas what's going on here? I'm using Cura 3.4 for",
"printing.... Any ideas what's going on here? I'm using Cura 3.4 for Linux.",
"I just import the part without doing anything else, Cura is still confused:",
"Thingiverse without issue. However, as I'm trying to print another part, I've run",
"a couple things off Thingiverse without issue. However, as I'm trying to print",
"isn't: [](https://i.stack.imgur.com/j56yL.png) All I did was use the \"mirror\" feature",
"and what isn't: [](https://i.stack.imgur.com/j56yL.png) All I did was use the",
"by Oshac, but I get the same result: [](https://i.stack.imgur.com/4v0HG.png) **Update",
"so even when I just import the part without doing anything else, Cura",
"print a couple things off Thingiverse without issue. However, as I'm trying to",
"is totally confused as to what's touching the buildplate and what isn't: [](https://i.stack.imgur.com/4v0HG.png) **Update 2:**",
"rotation tool instead as suggested by Oshac, but I get the same result:",
"use the \"mirror\" feature to put it in a better orientation for printing....",
"--- **Update:** I tried using the rotation tool instead as suggested by Oshac,",
"the part without doing anything else, Cura is still confused: [](https://i.stack.imgur.com/j56yL.png) All I did",
"here? I'm using Cura 3.4 for Linux. --- **Update:** I tried using the",
"I've been able to print a couple things off Thingiverse without issue. However,",
"things off Thingiverse without issue. However, as I'm trying to print another part,",
"better orientation for printing.... Any ideas what's going on here? I'm using Cura",
"All I did was use the \"mirror\" feature to put it in a",
"tried using the rotation tool instead as suggested by Oshac, but I get",
"far I've been able to print a couple things off Thingiverse without issue.",
"off Thingiverse without issue. However, as I'm trying to print another part, I've",
"in a better orientation for printing.... Any ideas what's going on here? I'm",
"into a situation where Cura is totally confused as to what's touching the",
"couple things off Thingiverse without issue. However, as I'm trying to print another",
"3D printing, but so far I've been able to print a couple things",
"ideas what's going on here? I'm using Cura 3.4 for Linux. --- **Update:**",
"Any ideas what's going on here? I'm using Cura 3.4 for Linux. ---",
"buildplate and what isn't: [](https://i.stack.imgur.com/j56yL.png) All I did was use",
"**Update:** I tried using the rotation tool instead as suggested by Oshac, but",
"issue. However, as I'm trying to print another part, I've run into a",
"a situation where Cura is totally confused as to what's touching the buildplate",
"I tried using the rotation tool instead as suggested by Oshac, but I",
"to print a couple things off Thingiverse without issue. However, as I'm trying",
"did was use the \"mirror\" feature to put it in a better orientation",
"was use the \"mirror\" feature to put it in a better orientation for",
"part, I've run into a situation where Cura is totally confused as to",
"I'm trying to print another part, I've run into a situation where Cura",
"put it in a better orientation for printing.... Any ideas what's going on",
"result: [](https://i.stack.imgur.com/4v0HG.png) **Update 2:** Hmm so even when I just",
"description here](https://i.stack.imgur.com/4v0HG.png)](https://i.stack.imgur.com/4v0HG.png) **Update 2:** Hmm so even when I just import the part",
"what's going on here? I'm using Cura 3.4 for Linux. --- **Update:** I",
"just import the part without doing anything else, Cura is still confused: [](https://i.stack.imgur.com/4v0HG.png) **Update 2:** Hmm",
"image description here](https://i.stack.imgur.com/4v0HG.png)](https://i.stack.imgur.com/4v0HG.png) **Update 2:** Hmm so even when I just import the",
"instead as suggested by Oshac, but I get the same result: [](https://i.stack.imgur.com/4v0HG.png) **Update 2:** Hmm so even when I just import",
"Linux. --- **Update:** I tried using the rotation tool instead as suggested by",
"as to what's touching the buildplate and what isn't: [](https://i.stack.imgur.com/j56yL.png)",
"orientation for printing.... Any ideas what's going on here? I'm using Cura 3.4",
"**Update 2:** Hmm so even when I just import the part without doing",
"totally confused as to what's touching the buildplate and what isn't: [](https://i.stack.imgur.com/j56yL.png) All I",
"the rotation tool instead as suggested by Oshac, but I get the same",
"here](https://i.stack.imgur.com/4v0HG.png)](https://i.stack.imgur.com/4v0HG.png) **Update 2:** Hmm so even when I just import the part without",
"what isn't: [](https://i.stack.imgur.com/j56yL.png) All I did was use the \"mirror\"",
"Hmm so even when I just import the part without doing anything else,",
"Cura 3.4 for Linux. --- **Update:** I tried using the rotation tool instead",
"here](https://i.stack.imgur.com/j56yL.png)](https://i.stack.imgur.com/j56yL.png) All I did was use the \"mirror\" feature to put it in",
"suggested by Oshac, but I get the same result: [](https://i.stack.imgur.com/4v0HG.png)",
"image description here](https://i.stack.imgur.com/j56yL.png)](https://i.stack.imgur.com/j56yL.png) All I did was use the \"mirror\" feature to put",
"situation where Cura is totally confused as to what's touching the buildplate and",
"import the part without doing anything else, Cura is still confused: [](https://i.stack.imgur.com/j56yL.png) All",
"when I just import the part without doing anything else, Cura is still",
"the buildplate and what isn't: [](https://i.stack.imgur.com/j56yL.png) All I did was",
"get the same result: [](https://i.stack.imgur.com/4v0HG.png) **Update 2:** Hmm so even",
"going on here? I'm using Cura 3.4 for Linux. --- **Update:** I tried",
"to print another part, I've run into a situation where Cura is totally",
"I get the same result: [](https://i.stack.imgur.com/4v0HG.png) **Update 2:** Hmm so",
"same result: [](https://i.stack.imgur.com/4v0HG.png) **Update 2:** Hmm so even when I",
"even when I just import the part without doing anything else, Cura is",
"the \"mirror\" feature to put it in a better orientation for printing.... Any",
"2:** Hmm so even when I just import the part without doing anything",
"tool instead as suggested by Oshac, but I get the same result: [](https://i.stack.imgur.com/jschr.png)",
"3.4 for Linux. --- **Update:** I tried using the rotation tool instead as",
"the same result: [](https://i.stack.imgur.com/4v0HG.png) **Update 2:** Hmm so even when",
"[](https://i.stack.imgur.com/j56yL.png) All I did was use the \"mirror\" feature to",
"trying to print another part, I've run into a situation where Cura is",
"very new to 3D printing, but so far I've been able to print"
] |
[
"// For M851 give a range for adjusting the Z probe offset #define",
"will be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX",
"// set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING",
"of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the",
"(no probe/no switch).** * Is it possible to do this with software? *",
"#define PROBE_MANUALLY #define X_PROBE_OFFSET_FROM_EXTRUDER 1 // X offset: -left +right [of the nozzle]",
"3 // Z Clearance between probe points // For M851 give a range",
"X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.",
"// Z Clearance between probe points // For M851 give a range for",
"between probe points // For M851 give a range for adjusting the Z",
"for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points // For",
"am trying to use software endstops, but any time I `G28` the nozzle",
"//#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will",
"endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of",
"and it shows that it is going to z0.2 and working upward (but",
"invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true",
"adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 #define INVERT_Z_DIR",
"so I am trying to use software endstops, but any time I `G28`",
"currently (no probe/no switch).** * Is it possible to do this with software?",
"I am using Marlin Firmware. Which I am relatively new with. I'm used",
"switch).** * Is it possible to do this with software? * I took",
"Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.",
"for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 #define",
"Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all",
"// set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING",
"of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the",
"#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG #if DISABLED(ENDSTOPPULLUPS) //",
"Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.4 #define MULTIPLE_PROBING 2 #define",
"is level do I need a `G28`? * Should Z probe offset be",
"#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing",
"#define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing",
"working upward (but it still hits the bed). If the bed is level",
"//#define MIN_SOFTWARE_ENDSTOP_Y #define MIN_SOFTWARE_ENDSTOP_Z #endif #define AUTO_BED_LEVELING_BILINEAR #define MANUAL_Z_HOME_POS 0 #define Z_SAFE_HOMING #if",
"//#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif #define X_MIN_ENDSTOP_INVERTING true //",
"2) // X point for Z homing when homing all axes (G28). #define",
"I took out `G28`/`G29` in my G-code and it shows that it is",
"I need a `G28`? * Should Z probe offset be 0? ``` #define",
"#define MANUAL_Z_HOME_POS 0 #define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) //",
"//#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif #define X_MIN_ENDSTOP_INVERTING",
"the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to",
"ram into the bed. I am using Marlin Firmware. Which I am relatively",
"to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to",
"saving many CPU cycles. #define ENDSTOP_INTERRUPTS_FEATURE #define PROBE_MANUALLY #define X_PROBE_OFFSET_FROM_EXTRUDER 1 // X",
"using Marlin Firmware. Which I am relatively new with. I'm used to having",
"having hardware endstops, but, **I don't have a hardware endstop currently (no probe/no",
"CPU cycles. #define ENDSTOP_INTERRUPTS_FEATURE #define PROBE_MANUALLY #define X_PROBE_OFFSET_FROM_EXTRUDER 1 // X offset: -left",
"software? * I took out `G28`/`G29` in my G-code and it shows that",
"new with. I'm used to having hardware endstops, but, **I don't have a",
"(but it still hits the bed). If the bed is level do I",
"false // set to true to invert the logic of the endstop. #define",
"logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to true to invert",
"if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define",
"endstop currently (no probe/no switch).** * Is it possible to do this with",
"the wires came out of the header so I am trying to use",
"it shows that it is going to z0.2 and working upward (but it",
"ENABLED(MIN_SOFTWARE_ENDSTOPS) //#define MIN_SOFTWARE_ENDSTOP_X //#define MIN_SOFTWARE_ENDSTOP_Y #define MIN_SOFTWARE_ENDSTOP_Z #endif #define AUTO_BED_LEVELING_BILINEAR #define MANUAL_Z_HOME_POS 0",
"with. I'm used to having hardware endstops, but, **I don't have a hardware",
"offset be 0? ``` #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define",
"ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when",
"trying to use software endstops, but any time I `G28` the nozzle will",
"* Should Z probe offset be 0? ``` #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define",
"#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the",
"Z homing when homing all axes (G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) //",
"**I don't have a hardware endstop currently (no probe/no switch).** * Is it",
"#define X_PROBE_OFFSET_FROM_EXTRUDER 1 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER",
"need a `G28`? * Should Z probe offset be 0? ``` #define USE_XMIN_PLUG",
"2 #define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 3 //",
"Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points // For M851",
"-55 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.4 #define MULTIPLE_PROBING",
"the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -55 // Y offset: -front +behind [the nozzle] #define",
"#endif #define AUTO_BED_LEVELING_BILINEAR #define MANUAL_Z_HOME_POS 0 #define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE)",
"this with software? * I took out `G28`/`G29` in my G-code and it",
"to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to",
"the logic of the probe. // Enable this feature if all enabled endstop",
"pins are interrupt-capable. // This will remove the need to poll the interrupt",
"#define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z",
"DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is",
"// X point for Z homing when homing all axes (G28). #define Z_SAFE_HOMING_Y_POINT",
"a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX",
"#define Y_PROBE_OFFSET_FROM_EXTRUDER -55 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.4",
"Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.",
"#if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS",
"ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif #define",
"into the bed. I am using Marlin Firmware. Which I am relatively new",
"axes (G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing",
"ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif #define X_MIN_ENDSTOP_INVERTING true // set",
"(G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when",
"logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert",
"`G28`/`G29` in my G-code and it shows that it is going to z0.2",
"/ 2) // Y point for Z homing when homing all axes (G28).",
"to having hardware endstops, but, **I don't have a hardware endstop currently (no",
"bed). If the bed is level do I need a `G28`? * Should",
"// Y point for Z homing when homing all axes (G28). #endif ```",
"nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -55 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER",
"of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the",
"0 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between",
"shows that it is going to z0.2 and working upward (but it still",
"and working upward (but it still hits the bed). If the bed is",
"be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define",
"endstops, but any time I `G28` the nozzle will always ram into the",
"bed is level do I need a `G28`? * Should Z probe offset",
"true // set to true to invert the logic of the endstop. #define",
"hardware endstops, but, **I don't have a hardware endstop currently (no probe/no switch).**",
"#define INVERT_Z_DIR true #define Z_MIN_POS 0 #if ENABLED(MIN_SOFTWARE_ENDSTOPS) //#define MIN_SOFTWARE_ENDSTOP_X //#define MIN_SOFTWARE_ENDSTOP_Y #define",
"//#define MIN_SOFTWARE_ENDSTOP_X //#define MIN_SOFTWARE_ENDSTOP_Y #define MIN_SOFTWARE_ENDSTOP_Z #endif #define AUTO_BED_LEVELING_BILINEAR #define MANUAL_Z_HOME_POS 0 #define",
"set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true",
"to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true //",
"to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to",
"logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert",
"I `G28` the nozzle will always ram into the bed. I am using",
"do I need a `G28`? * Should Z probe offset be 0? ```",
"set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false",
"#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the",
"probe offset be 0? ``` #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG",
"/ 2) // X point for Z homing when homing all axes (G28).",
"X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -55 // Y offset:",
"set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true",
"to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true //",
"#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the",
"remove the need to poll the interrupt pins, saving many CPU cycles. #define",
"Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 #define INVERT_Z_DIR true #define",
"#define Z_PROBE_OFFSET_RANGE_MAX 20 #define INVERT_Z_DIR true #define Z_MIN_POS 0 #if ENABLED(MIN_SOFTWARE_ENDSTOPS) //#define MIN_SOFTWARE_ENDSTOP_X",
"true to invert the logic of the probe. // Enable this feature if",
"logic of the probe. // Enable this feature if all enabled endstop pins",
"USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings:",
"Which I am relatively new with. I'm used to having hardware endstops, but,",
"* I took out `G28`/`G29` in my G-code and it shows that it",
"software endstops, but any time I `G28` the nozzle will always ram into",
"give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define",
"the bed). If the bed is level do I need a `G28`? *",
"#define MULTIPLE_PROBING 2 #define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES",
"// Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.4 #define MULTIPLE_PROBING 2",
"probe/no switch).** * Is it possible to do this with software? * I",
"Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.",
"out `G28`/`G29` in my G-code and it shows that it is going to",
"USE_ZMAX_PLUG #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will be ignored if",
"will always ram into the bed. I am using Marlin Firmware. Which I",
"Z_MIN_POS 0 #if ENABLED(MIN_SOFTWARE_ENDSTOPS) //#define MIN_SOFTWARE_ENDSTOP_X //#define MIN_SOFTWARE_ENDSTOP_Y #define MIN_SOFTWARE_ENDSTOP_Z #endif #define AUTO_BED_LEVELING_BILINEAR",
"the bed is level do I need a `G28`? * Should Z probe",
"the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic",
"all axes (G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z",
"X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.",
"of the header so I am trying to use software endstops, but any",
"Firmware. Which I am relatively new with. I'm used to having hardware endstops,",
"endstop pins are interrupt-capable. // This will remove the need to poll the",
"true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set",
"the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic",
"to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true //",
"in my G-code and it shows that it is going to z0.2 and",
"many CPU cycles. #define ENDSTOP_INTERRUPTS_FEATURE #define PROBE_MANUALLY #define X_PROBE_OFFSET_FROM_EXTRUDER 1 // X offset:",
"Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 #define INVERT_Z_DIR true #define Z_MIN_POS 0 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)",
"am using Marlin Firmware. Which I am relatively new with. I'm used to",
"header so I am trying to use software endstops, but any time I",
"out of the header so I am trying to use software endstops, but",
"true // set to true to invert the logic of the probe. //",
"#if ENABLED(MIN_SOFTWARE_ENDSTOPS) //#define MIN_SOFTWARE_ENDSTOP_X //#define MIN_SOFTWARE_ENDSTOP_Y #define MIN_SOFTWARE_ENDSTOP_Z #endif #define AUTO_BED_LEVELING_BILINEAR #define MANUAL_Z_HOME_POS",
"offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.4 #define MULTIPLE_PROBING 2 #define Z_CLEARANCE_DEPLOY_PROBE",
"0 #define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point",
"set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false",
"logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert",
"the need to poll the interrupt pins, saving many CPU cycles. #define ENDSTOP_INTERRUPTS_FEATURE",
"the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic",
"a `G28`? * Should Z probe offset be 0? ``` #define USE_XMIN_PLUG #define",
"the probe. // Enable this feature if all enabled endstop pins are interrupt-capable.",
"// set to true to invert the logic of the probe. // Enable",
"nozzle will always ram into the bed. I am using Marlin Firmware. Which",
"`G28` the nozzle will always ram into the bed. I am using Marlin",
"true #define Z_MIN_POS 0 #if ENABLED(MIN_SOFTWARE_ENDSTOPS) //#define MIN_SOFTWARE_ENDSTOP_X //#define MIN_SOFTWARE_ENDSTOP_Y #define MIN_SOFTWARE_ENDSTOP_Z #endif",
"Z_PROBE_OFFSET_FROM_EXTRUDER -3.4 #define MULTIPLE_PROBING 2 #define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow",
"// set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING",
"this feature if all enabled endstop pins are interrupt-capable. // This will remove",
"to true to invert the logic of the probe. // Enable this feature",
"#define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG #if",
"true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set",
"#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the",
"For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN",
"endstops, but, **I don't have a hardware endstop currently (no probe/no switch).** *",
"Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points // For M851 give a",
"INVERT_Z_DIR true #define Z_MIN_POS 0 #if ENABLED(MIN_SOFTWARE_ENDSTOPS) //#define MIN_SOFTWARE_ENDSTOP_X //#define MIN_SOFTWARE_ENDSTOP_Y #define MIN_SOFTWARE_ENDSTOP_Z",
"endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX",
"endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of",
"Clearance between probe points // For M851 give a range for adjusting the",
"MIN_SOFTWARE_ENDSTOP_Z #endif #define AUTO_BED_LEVELING_BILINEAR #define MANUAL_Z_HOME_POS 0 #define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT",
"AUTO_BED_LEVELING_BILINEAR #define MANUAL_Z_HOME_POS 0 #define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2)",
"time I `G28` the nozzle will always ram into the bed. I am",
"the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 #define INVERT_Z_DIR true",
"the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to true to",
"//#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif #define X_MIN_ENDSTOP_INVERTING true // set to true to",
"probe. // Enable this feature if all enabled endstop pins are interrupt-capable. //",
"-left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -55 // Y offset: -front +behind",
"20 #define INVERT_Z_DIR true #define Z_MIN_POS 0 #if ENABLED(MIN_SOFTWARE_ENDSTOPS) //#define MIN_SOFTWARE_ENDSTOP_X //#define MIN_SOFTWARE_ENDSTOP_Y",
"feature if all enabled endstop pins are interrupt-capable. // This will remove the",
"I had a Z probe installed but the wires came out of the",
"cycles. #define ENDSTOP_INTERRUPTS_FEATURE #define PROBE_MANUALLY #define X_PROBE_OFFSET_FROM_EXTRUDER 1 // X offset: -left +right",
"[the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.4 #define MULTIPLE_PROBING 2 #define Z_CLEARANCE_DEPLOY_PROBE 0 // Z",
"but the wires came out of the header so I am trying to",
"it is going to z0.2 and working upward (but it still hits the",
"MULTIPLE_PROBING 2 #define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 3",
"range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20",
"Individual pullups. will be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX",
"#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the",
"``` #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG",
"installed but the wires came out of the header so I am trying",
"to poll the interrupt pins, saving many CPU cycles. #define ENDSTOP_INTERRUPTS_FEATURE #define PROBE_MANUALLY",
"to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false //",
"invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true",
"probe points // For M851 give a range for adjusting the Z probe",
"the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to",
"Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all",
"2) // Y point for Z homing when homing all axes (G28). #endif",
"This will remove the need to poll the interrupt pins, saving many CPU",
"hits the bed). If the bed is level do I need a `G28`?",
"poll the interrupt pins, saving many CPU cycles. #define ENDSTOP_INTERRUPTS_FEATURE #define PROBE_MANUALLY #define",
"any time I `G28` the nozzle will always ram into the bed. I",
"((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes",
"wires came out of the header so I am trying to use software",
"[of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -55 // Y offset: -front +behind [the nozzle]",
"M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20",
"for Z homing when homing all axes (G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2)",
"Should Z probe offset be 0? ``` #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG",
"invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true",
"USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups.",
"I am trying to use software endstops, but any time I `G28` the",
"// Enable this feature if all enabled endstop pins are interrupt-capable. // This",
"to z0.2 and working upward (but it still hits the bed). If the",
"logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert",
"when homing all axes (G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point",
"the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic",
"MANUAL_Z_HOME_POS 0 #define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X",
"pullups. will be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define",
"ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE",
"are interrupt-capable. // This will remove the need to poll the interrupt pins,",
"probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 #define INVERT_Z_DIR true #define Z_MIN_POS",
"true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set",
"Enable this feature if all enabled endstop pins are interrupt-capable. // This will",
"ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN",
"// Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe",
"+behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.4 #define MULTIPLE_PROBING 2 #define Z_CLEARANCE_DEPLOY_PROBE 0 //",
"do this with software? * I took out `G28`/`G29` in my G-code and",
"invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true",
"Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe.",
"my G-code and it shows that it is going to z0.2 and working",
"have a hardware endstop currently (no probe/no switch).** * Is it possible to",
"Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points //",
"invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to true",
"#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the",
"it possible to do this with software? * I took out `G28`/`G29` in",
"probe installed but the wires came out of the header so I am",
"is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define",
"z0.2 and working upward (but it still hits the bed). If the bed",
"that it is going to z0.2 and working upward (but it still hits",
"Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points",
"point for Z homing when homing all axes (G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) /",
"a Z probe installed but the wires came out of the header so",
"X_PROBE_OFFSET_FROM_EXTRUDER 1 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -55",
"USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG #if DISABLED(ENDSTOPPULLUPS) // fine",
"upward (but it still hits the bed). If the bed is level do",
"#define MIN_SOFTWARE_ENDSTOP_Z #endif #define AUTO_BED_LEVELING_BILINEAR #define MANUAL_Z_HOME_POS 0 #define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define",
"PROBE_MANUALLY #define X_PROBE_OFFSET_FROM_EXTRUDER 1 // X offset: -left +right [of the nozzle] #define",
"-3.4 #define MULTIPLE_PROBING 2 #define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow #define",
"// X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -55 // Y",
"Z_PROBE_OFFSET_RANGE_MAX 20 #define INVERT_Z_DIR true #define Z_MIN_POS 0 #if ENABLED(MIN_SOFTWARE_ENDSTOPS) //#define MIN_SOFTWARE_ENDSTOP_X //#define",
"//#define ENDSTOPPULLUP_ZMIN_PROBE #endif #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the",
"interrupt pins, saving many CPU cycles. #define ENDSTOP_INTERRUPTS_FEATURE #define PROBE_MANUALLY #define X_PROBE_OFFSET_FROM_EXTRUDER 1",
"the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to",
"invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true",
"// set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING",
"but any time I `G28` the nozzle will always ram into the bed.",
"the nozzle will always ram into the bed. I am using Marlin Firmware.",
"#define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG #if DISABLED(ENDSTOPPULLUPS) // fine endstop",
"had a Z probe installed but the wires came out of the header",
"true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set",
"invert the logic of the probe. // Enable this feature if all enabled",
"will remove the need to poll the interrupt pins, saving many CPU cycles.",
"a hardware endstop currently (no probe/no switch).** * Is it possible to do",
"use software endstops, but any time I `G28` the nozzle will always ram",
"//#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif",
"#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the",
"took out `G28`/`G29` in my G-code and it shows that it is going",
"of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the",
"the interrupt pins, saving many CPU cycles. #define ENDSTOP_INTERRUPTS_FEATURE #define PROBE_MANUALLY #define X_PROBE_OFFSET_FROM_EXTRUDER",
"//#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define",
"G-code and it shows that it is going to z0.2 and working upward",
"0 #if ENABLED(MIN_SOFTWARE_ENDSTOPS) //#define MIN_SOFTWARE_ENDSTOP_X //#define MIN_SOFTWARE_ENDSTOP_Y #define MIN_SOFTWARE_ENDSTOP_Z #endif #define AUTO_BED_LEVELING_BILINEAR #define",
"//#define USE_ZMAX_PLUG #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will be ignored",
"don't have a hardware endstop currently (no probe/no switch).** * Is it possible",
"homing all axes (G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for",
"offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 #define INVERT_Z_DIR true #define Z_MIN_POS 0",
"bed. I am using Marlin Firmware. Which I am relatively new with. I'm",
"Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance",
"`G28`? * Should Z probe offset be 0? ``` #define USE_XMIN_PLUG #define USE_YMIN_PLUG",
"#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for",
"true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set",
"true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set",
"possible to do this with software? * I took out `G28`/`G29` in my",
"((X_BED_SIZE) / 2) // X point for Z homing when homing all axes",
"-front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.4 #define MULTIPLE_PROBING 2 #define Z_CLEARANCE_DEPLOY_PROBE 0",
"with software? * I took out `G28`/`G29` in my G-code and it shows",
"level do I need a `G28`? * Should Z probe offset be 0?",
"need to poll the interrupt pins, saving many CPU cycles. #define ENDSTOP_INTERRUPTS_FEATURE #define",
"nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.4 #define MULTIPLE_PROBING 2 #define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance",
"ENDSTOP_INTERRUPTS_FEATURE #define PROBE_MANUALLY #define X_PROBE_OFFSET_FROM_EXTRUDER 1 // X offset: -left +right [of the",
"X point for Z homing when homing all axes (G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE)",
"#define AUTO_BED_LEVELING_BILINEAR #define MANUAL_Z_HOME_POS 0 #define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) /",
"to use software endstops, but any time I `G28` the nozzle will always",
"MIN_SOFTWARE_ENDSTOP_Y #define MIN_SOFTWARE_ENDSTOP_Z #endif #define AUTO_BED_LEVELING_BILINEAR #define MANUAL_Z_HOME_POS 0 #define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING)",
"+right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -55 // Y offset: -front +behind [the",
"0? ``` #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define",
"Z probe installed but the wires came out of the header so I",
"//#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual",
"ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif #define X_MIN_ENDSTOP_INVERTING true // set to true",
"set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false",
"-20 #define Z_PROBE_OFFSET_RANGE_MAX 20 #define INVERT_Z_DIR true #define Z_MIN_POS 0 #if ENABLED(MIN_SOFTWARE_ENDSTOPS) //#define",
"to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false //",
"the header so I am trying to use software endstops, but any time",
"Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.",
"used to having hardware endstops, but, **I don't have a hardware endstop currently",
"// This will remove the need to poll the interrupt pins, saving many",
"the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic",
"but, **I don't have a hardware endstop currently (no probe/no switch).** * Is",
"of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the",
"endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of",
"// set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING",
"ENDSTOPPULLUP_ZMIN_PROBE #endif #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic",
"// set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING",
"the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to",
"#define ENDSTOP_INTERRUPTS_FEATURE #define PROBE_MANUALLY #define X_PROBE_OFFSET_FROM_EXTRUDER 1 // X offset: -left +right [of",
"#define Z_MIN_POS 0 #if ENABLED(MIN_SOFTWARE_ENDSTOPS) //#define MIN_SOFTWARE_ENDSTOP_X //#define MIN_SOFTWARE_ENDSTOP_Y #define MIN_SOFTWARE_ENDSTOP_Z #endif #define",
"all enabled endstop pins are interrupt-capable. // This will remove the need to",
"points // For M851 give a range for adjusting the Z probe offset",
"enabled endstop pins are interrupt-capable. // This will remove the need to poll",
"MIN_SOFTWARE_ENDSTOP_X //#define MIN_SOFTWARE_ENDSTOP_Y #define MIN_SOFTWARE_ENDSTOP_Z #endif #define AUTO_BED_LEVELING_BILINEAR #define MANUAL_Z_HOME_POS 0 #define Z_SAFE_HOMING",
"* Is it possible to do this with software? * I took out",
"ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif #define X_MIN_ENDSTOP_INVERTING true // set to true to invert",
"of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the",
"defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN",
"homing when homing all axes (G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y",
"came out of the header so I am trying to use software endstops,",
"interrupt-capable. // This will remove the need to poll the interrupt pins, saving",
"USE_YMAX_PLUG //#define USE_ZMAX_PLUG #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will be",
"to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false //",
"settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define",
"going to z0.2 and working upward (but it still hits the bed). If",
"Is it possible to do this with software? * I took out `G28`/`G29`",
"if all enabled endstop pins are interrupt-capable. // This will remove the need",
"USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG #if DISABLED(ENDSTOPPULLUPS)",
"I'm used to having hardware endstops, but, **I don't have a hardware endstop",
"#define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 #define INVERT_Z_DIR true #define Z_MIN_POS 0 #if",
"#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points // For M851 give",
"to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to",
"set to true to invert the logic of the probe. // Enable this",
"#endif #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of",
"set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true",
"//#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif #define X_MIN_ENDSTOP_INVERTING true // set to",
"the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to",
"Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z",
"I am relatively new with. I'm used to having hardware endstops, but, **I",
"offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -55 // Y offset: -front",
"endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of",
"always ram into the bed. I am using Marlin Firmware. Which I am",
"fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined //#define",
"Z Clearance between probe points // For M851 give a range for adjusting",
"logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert",
"endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of",
"If the bed is level do I need a `G28`? * Should Z",
"hardware endstop currently (no probe/no switch).** * Is it possible to do this",
"to invert the logic of the probe. // Enable this feature if all",
"Marlin Firmware. Which I am relatively new with. I'm used to having hardware",
"is going to z0.2 and working upward (but it still hits the bed).",
"to do this with software? * I took out `G28`/`G29` in my G-code",
"// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined",
"#if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing",
"to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to",
"endstop. #define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of",
"1 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -55 //",
"ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif #define X_MIN_ENDSTOP_INVERTING true",
"the bed. I am using Marlin Firmware. Which I am relatively new with.",
"it still hits the bed). If the bed is level do I need",
"Y_PROBE_OFFSET_FROM_EXTRUDER -55 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.4 #define",
"Z probe offset be 0? ``` #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define",
"to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to",
"am relatively new with. I'm used to having hardware endstops, but, **I don't",
"the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic",
"ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN",
"of the probe. // Enable this feature if all enabled endstop pins are",
"relatively new with. I'm used to having hardware endstops, but, **I don't have",
"#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.4 #define MULTIPLE_PROBING 2 #define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for",
"pins, saving many CPU cycles. #define ENDSTOP_INTERRUPTS_FEATURE #define PROBE_MANUALLY #define X_PROBE_OFFSET_FROM_EXTRUDER 1 //",
"still hits the bed). If the bed is level do I need a",
"be 0? ``` #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG"
] |
[
"PEEK ([PolyEther Ether Ketone](https://en.wikipedia.org/wiki/Polyether_ether_ketone)), a thermoplastic polymer in the polyaryletherketone (PAEK) family. PEEK",
"(PAEK) family. PEEK competes with certain Aluminium alloys but is half the weight",
"family. PEEK competes with certain Aluminium alloys but is half the weight of",
"these types of polymers is feasible using low-cost, open source hardware. **Does anybody",
"PEEK competes with certain Aluminium alloys but is half the weight of Aluminium.",
"half the weight of Aluminium. For aerospace application this sounds very promising! NASA",
"looking at about 700 - 900 Euro per kg. [ that",
"of PEEK are so high?** Depending on the supplier/manufacturer you're looking at about",
"promising! NASA has [shown](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf) that printing these types of polymers is feasible using",
"at about 700 - 900 Euro per kg. [](https://i.stack.imgur.com/fqNar.png)",
"in the polyaryletherketone (PAEK) family. PEEK competes with certain Aluminium alloys but is",
"open source hardware. **Does anybody know why the prices of PEEK are so",
"thermoplastic polymer in the polyaryletherketone (PAEK) family. PEEK competes with certain Aluminium alloys",
"has [shown](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf) that printing these types of polymers is feasible using low-cost, open",
"materials is PEEK ([PolyEther Ether Ketone](https://en.wikipedia.org/wiki/Polyether_ether_ketone)), a thermoplastic polymer in the polyaryletherketone (PAEK)",
"anybody know why the prices of PEEK are so high?** Depending on the",
"([PolyEther Ether Ketone](https://en.wikipedia.org/wiki/Polyether_ether_ketone)), a thermoplastic polymer in the polyaryletherketone (PAEK) family. PEEK competes",
"Depending on the supplier/manufacturer you're looking at about 700 - 900 Euro per",
"specific applications. One of such materials is PEEK ([PolyEther Ether Ketone](https://en.wikipedia.org/wiki/Polyether_ether_ketone)), a thermoplastic",
"types of polymers is feasible using low-cost, open source hardware. **Does anybody know",
"of such materials is PEEK ([PolyEther Ether Ketone](https://en.wikipedia.org/wiki/Polyether_ether_ketone)), a thermoplastic polymer in the",
"very promising! NASA has [shown](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf) that printing these types of polymers is feasible",
"**Does anybody know why the prices of PEEK are so high?** Depending on",
"[shown](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf) that printing these types of polymers is feasible using low-cost, open source",
"Aluminium alloys but is half the weight of Aluminium. For aerospace application this",
"supplier/manufacturer you're looking at about 700 - 900 Euro per kg. [), a thermoplastic polymer",
"NASA has [shown](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf) that printing these types of polymers is feasible using low-cost,",
"For aerospace application this sounds very promising! NASA has [shown](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf) that printing these",
"high?** Depending on the supplier/manufacturer you're looking at about 700 - 900 Euro",
"but is half the weight of Aluminium. For aerospace application this sounds very",
"printing these types of polymers is feasible using low-cost, open source hardware. **Does",
"why the prices of PEEK are so high?** Depending on the supplier/manufacturer you're",
"the prices of PEEK are so high?** Depending on the supplier/manufacturer you're looking",
"PEEK are so high?** Depending on the supplier/manufacturer you're looking at about 700",
"the weight of Aluminium. For aerospace application this sounds very promising! NASA has",
"feasible using low-cost, open source hardware. **Does anybody know why the prices of",
"certain Aluminium alloys but is half the weight of Aluminium. For aerospace application",
"the supplier/manufacturer you're looking at about 700 - 900 Euro per kg. [), a thermoplastic polymer in the polyaryletherketone (PAEK) family. PEEK competes with certain",
"One of such materials is PEEK ([PolyEther Ether Ketone](https://en.wikipedia.org/wiki/Polyether_ether_ketone)), a thermoplastic polymer in",
"becoming available for specific applications. One of such materials is PEEK ([PolyEther Ether",
"are so high?** Depending on the supplier/manufacturer you're looking at about 700 -",
"alloys but is half the weight of Aluminium. For aerospace application this sounds",
"aerospace application this sounds very promising! NASA has [shown](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf) that printing these types",
"Ether Ketone](https://en.wikipedia.org/wiki/Polyether_ether_ketone)), a thermoplastic polymer in the polyaryletherketone (PAEK) family. PEEK competes with",
"performance polymers are becoming available for specific applications. One of such materials is",
"is feasible using low-cost, open source hardware. **Does anybody know why the prices",
"competes with certain Aluminium alloys but is half the weight of Aluminium. For",
"the polyaryletherketone (PAEK) family. PEEK competes with certain Aluminium alloys but is half",
"a thermoplastic polymer in the polyaryletherketone (PAEK) family. PEEK competes with certain Aluminium",
"available for specific applications. One of such materials is PEEK ([PolyEther Ether Ketone](https://en.wikipedia.org/wiki/Polyether_ether_ketone)),",
"application this sounds very promising! NASA has [shown](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf) that printing these types of",
"using low-cost, open source hardware. **Does anybody know why the prices of PEEK",
"this sounds very promising! NASA has [shown](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf) that printing these types of polymers",
"polymers is feasible using low-cost, open source hardware. **Does anybody know why the",
"polyaryletherketone (PAEK) family. PEEK competes with certain Aluminium alloys but is half the",
"sounds very promising! NASA has [shown](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf) that printing these types of polymers is",
"are becoming available for specific applications. One of such materials is PEEK ([PolyEther",
"prices of PEEK are so high?** Depending on the supplier/manufacturer you're looking at",
"know why the prices of PEEK are so high?** Depending on the supplier/manufacturer",
"weight of Aluminium. For aerospace application this sounds very promising! NASA has [shown](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf)",
"is PEEK ([PolyEther Ether Ketone](https://en.wikipedia.org/wiki/Polyether_ether_ketone)), a thermoplastic polymer in the polyaryletherketone (PAEK) family.",
"source hardware. **Does anybody know why the prices of PEEK are so high?**",
"so high?** Depending on the supplier/manufacturer you're looking at about 700 - 900",
"hardware. **Does anybody know why the prices of PEEK are so high?** Depending",
"Aluminium. For aerospace application this sounds very promising! NASA has [shown](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170000214.pdf) that printing",
"low-cost, open source hardware. **Does anybody know why the prices of PEEK are",
"on the supplier/manufacturer you're looking at about 700 - 900 Euro per kg.",
"is half the weight of Aluminium. For aerospace application this sounds very promising!",
"High performance polymers are becoming available for specific applications. One of such materials",
"for specific applications. One of such materials is PEEK ([PolyEther Ether Ketone](https://en.wikipedia.org/wiki/Polyether_ether_ketone)), a",
"such materials is PEEK ([PolyEther Ether Ketone](https://en.wikipedia.org/wiki/Polyether_ether_ketone)), a thermoplastic polymer in the polyaryletherketone",
"polymer in the polyaryletherketone (PAEK) family. PEEK competes with certain Aluminium alloys but",
"that printing these types of polymers is feasible using low-cost, open source hardware.",
"with certain Aluminium alloys but is half the weight of Aluminium. For aerospace",
"of polymers is feasible using low-cost, open source hardware. **Does anybody know why"
] |
[
"% or less. Probably someone has seen or reviewed another software to achieve",
"% or greater. * The walls and forms: this has the same of",
"at 15 % or less. Probably someone has seen or reviewed another software",
"25 % but the same base has some tabs for screws and mount",
"same part? For example: * Base: has the infill of 25 % but",
"can be filled at 25 % but some areas need to be filled",
"pattern depending on amount of layers, but my question is if is possible",
"has the infill of 25 % but the same base has some tabs",
"the same part? For example: * Base: has the infill of 25 %",
"the whole part and can be filled at 25 % but some areas",
"has seen or reviewed another software to achieve this, or I'm fooling myself.",
"article to change different pattern depending on amount of layers, but my question",
"filled at 25 % but some areas need to be filled at 15",
"part and can be filled at 25 % but some areas need to",
"for this area the infill need to be 40 % or greater. *",
"different pattern depending on amount of layers, but my question is if is",
"change different pattern depending on amount of layers, but my question is if",
"the infill need to be 40 % or greater. * The walls and",
"of the whole part and can be filled at 25 % but some",
"of 25 % but the same base has some tabs for screws and",
"and can be filled at 25 % but some areas need to be",
"or less. Probably someone has seen or reviewed another software to achieve this,",
"part for this area the infill need to be 40 % or greater.",
"someone has seen or reviewed another software to achieve this, or I'm fooling",
"need to be 40 % or greater. * The walls and forms: this",
"or greater. * The walls and forms: this has the same of the",
"some areas need to be filled at 15 % or less. Probably someone",
"for screws and mount the part for this area the infill need to",
"has the same of the whole part and can be filled at 25",
"filled at 15 % or less. Probably someone has seen or reviewed another",
"different infill in the same part? For example: * Base: has the infill",
"my question is if is possible to have different infill in the same",
"For example: * Base: has the infill of 25 % but the same",
"to be 40 % or greater. * The walls and forms: this has",
"in the same part? For example: * Base: has the infill of 25",
"Base: has the infill of 25 % but the same base has some",
"base has some tabs for screws and mount the part for this area",
"some tabs for screws and mount the part for this area the infill",
"be 40 % or greater. * The walls and forms: this has the",
"% but the same base has some tabs for screws and mount the",
"and mount the part for this area the infill need to be 40",
"the infill of 25 % but the same base has some tabs for",
"mount the part for this area the infill need to be 40 %",
"Probably someone has seen or reviewed another software to achieve this, or I'm",
"to change different pattern depending on amount of layers, but my question is",
"25 % but some areas need to be filled at 15 % or",
"have different infill in the same part? For example: * Base: has the",
"forms: this has the same of the whole part and can be filled",
"depending on amount of layers, but my question is if is possible to",
"tabs for screws and mount the part for this area the infill need",
"layers, but my question is if is possible to have different infill in",
"greater. * The walls and forms: this has the same of the whole",
"be filled at 25 % but some areas need to be filled at",
"but my question is if is possible to have different infill in the",
"has some tabs for screws and mount the part for this area the",
"is possible to have different infill in the same part? For example: *",
"% but some areas need to be filled at 15 % or less.",
"areas need to be filled at 15 % or less. Probably someone has",
"but some areas need to be filled at 15 % or less. Probably",
"infill in the same part? For example: * Base: has the infill of",
"The walls and forms: this has the same of the whole part and",
"need to be filled at 15 % or less. Probably someone has seen",
"read an article to change different pattern depending on amount of layers, but",
"is if is possible to have different infill in the same part? For",
"less. Probably someone has seen or reviewed another software to achieve this, or",
"this has the same of the whole part and can be filled at",
"15 % or less. Probably someone has seen or reviewed another software to",
"walls and forms: this has the same of the whole part and can",
"40 % or greater. * The walls and forms: this has the same",
"I´ve have read an article to change different pattern depending on amount of",
"an article to change different pattern depending on amount of layers, but my",
"same of the whole part and can be filled at 25 % but",
"amount of layers, but my question is if is possible to have different",
"screws and mount the part for this area the infill need to be",
"to be filled at 15 % or less. Probably someone has seen or",
"same base has some tabs for screws and mount the part for this",
"the part for this area the infill need to be 40 % or",
"whole part and can be filled at 25 % but some areas need",
"infill of 25 % but the same base has some tabs for screws",
"on amount of layers, but my question is if is possible to have",
"have read an article to change different pattern depending on amount of layers,",
"if is possible to have different infill in the same part? For example:",
"question is if is possible to have different infill in the same part?",
"of layers, but my question is if is possible to have different infill",
"example: * Base: has the infill of 25 % but the same base",
"area the infill need to be 40 % or greater. * The walls",
"the same base has some tabs for screws and mount the part for",
"* The walls and forms: this has the same of the whole part",
"this area the infill need to be 40 % or greater. * The",
"part? For example: * Base: has the infill of 25 % but the",
"infill need to be 40 % or greater. * The walls and forms:",
"possible to have different infill in the same part? For example: * Base:",
"the same of the whole part and can be filled at 25 %",
"at 25 % but some areas need to be filled at 15 %",
"and forms: this has the same of the whole part and can be",
"* Base: has the infill of 25 % but the same base has",
"to have different infill in the same part? For example: * Base: has",
"be filled at 15 % or less. Probably someone has seen or reviewed",
"but the same base has some tabs for screws and mount the part"
] |
[
"design or a standard third party board? * Does anyone have any photos",
"* Ender 3 and; * CR-10 I would like to know how this",
"Is the board a proprietary design or a standard third party board? *",
"board a proprietary design or a standard third party board? * Does anyone",
"Ender 3 and; * CR-10 I would like to know how this dual",
"answer](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at#answer-6521) states that both 12 V and 24 V can be used on",
"standard third party board? * Does anyone have any photos of the board",
"how this dual voltage operation works: * Does it use both voltages at",
"two different printers: * Ender 3 and; * CR-10 I would like to",
"different electrical inlets or are they the same? * Does it auto-detect or",
"in two different printers: * Ender 3 and; * CR-10 I would like",
"different printers: * Ender 3 and; * CR-10 I would like to know",
"third party board? * Does anyone have any photos of the board and/or",
"on the controller board. It also goes on to say that the controller",
"in both configurations in two different printers: * Ender 3 and; * CR-10",
"the other? * Are there two different electrical inlets or are they the",
"used on the controller board. It also goes on to say that the",
"board. It also goes on to say that the controller board is used",
"run at?](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at/6521#comment9993_6521) [DupeKx's answer](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at#answer-6521) states that both 12 V and 24 V can",
"are the components tolerant to both voltage levels? Also related: * What is",
"[DupeKx's answer](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at#answer-6521) states that both 12 V and 24 V can be used",
"printers: * Ender 3 and; * CR-10 I would like to know how",
"voltage does the Creality Ender-3 run at?](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at/6521#comment9993_6521) [DupeKx's answer](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at#answer-6521) states that both 12",
"configure or are the components tolerant to both voltage levels? Also related: *",
"I would like to know how this dual voltage operation works: * Does",
"or a standard third party board? * Does anyone have any photos of",
"to know how this dual voltage operation works: * Does it use both",
"that the controller board is used in both configurations in two different printers:",
"and; * CR-10 I would like to know how this dual voltage operation",
"or are they the same? * Does it auto-detect or are there jumpers",
"is used in both configurations in two different printers: * Ender 3 and;",
"works: * Does it use both voltages at the same time, or either",
"both voltage levels? Also related: * What is the board used? * Is",
"controller board. It also goes on to say that the controller board is",
"used to configure or are the components tolerant to both voltage levels? Also",
"the same? * Does it auto-detect or are there jumpers used to configure",
"Ender-3 run at?](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at/6521#comment9993_6521) [DupeKx's answer](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at#answer-6521) states that both 12 V and 24 V",
"* Does it use both voltages at the same time, or either one",
"there jumpers used to configure or are the components tolerant to both voltage",
"related: * What is the board used? * Is the board a proprietary",
"* Is the board a proprietary design or a standard third party board?",
"to say that the controller board is used in both configurations in two",
"or the other? * Are there two different electrical inlets or are they",
"is the board used? * Is the board a proprietary design or a",
"and 24 V can be used on the controller board. It also goes",
"the controller board. It also goes on to say that the controller board",
"to both voltage levels? Also related: * What is the board used? *",
"it auto-detect or are there jumpers used to configure or are the components",
"at?](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at/6521#comment9993_6521) [DupeKx's answer](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at#answer-6521) states that both 12 V and 24 V can be",
"like to know how this dual voltage operation works: * Does it use",
"two different electrical inlets or are they the same? * Does it auto-detect",
"on from [What level of voltage does the Creality Ender-3 run at?](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at/6521#comment9993_6521) [DupeKx's",
"* Are there two different electrical inlets or are they the same? *",
"of voltage does the Creality Ender-3 run at?](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at/6521#comment9993_6521) [DupeKx's answer](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at#answer-6521) states that both",
"the controller board is used in both configurations in two different printers: *",
"V and 24 V can be used on the controller board. It also",
"operation works: * Does it use both voltages at the same time, or",
"a proprietary design or a standard third party board? * Does anyone have",
"auto-detect or are there jumpers used to configure or are the components tolerant",
"be used on the controller board. It also goes on to say that",
"level of voltage does the Creality Ender-3 run at?](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at/6521#comment9993_6521) [DupeKx's answer](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at#answer-6521) states that",
"both configurations in two different printers: * Ender 3 and; * CR-10 I",
"voltage operation works: * Does it use both voltages at the same time,",
"it use both voltages at the same time, or either one or the",
"know how this dual voltage operation works: * Does it use both voltages",
"Does it use both voltages at the same time, or either one or",
"use both voltages at the same time, or either one or the other?",
"Are there two different electrical inlets or are they the same? * Does",
"dual voltage operation works: * Does it use both voltages at the same",
"* Does it auto-detect or are there jumpers used to configure or are",
"used? * Is the board a proprietary design or a standard third party",
"proprietary design or a standard third party board? * Does anyone have any",
"12 V and 24 V can be used on the controller board. It",
"V can be used on the controller board. It also goes on to",
"would like to know how this dual voltage operation works: * Does it",
"electrical inlets or are they the same? * Does it auto-detect or are",
"CR-10 I would like to know how this dual voltage operation works: *",
"* What is the board used? * Is the board a proprietary design",
"are there jumpers used to configure or are the components tolerant to both",
"used in both configurations in two different printers: * Ender 3 and; *",
"components tolerant to both voltage levels? Also related: * What is the board",
"states that both 12 V and 24 V can be used on the",
"this dual voltage operation works: * Does it use both voltages at the",
"or either one or the other? * Are there two different electrical inlets",
"they the same? * Does it auto-detect or are there jumpers used to",
"It also goes on to say that the controller board is used in",
"same? * Does it auto-detect or are there jumpers used to configure or",
"there two different electrical inlets or are they the same? * Does it",
"or are the components tolerant to both voltage levels? Also related: * What",
"say that the controller board is used in both configurations in two different",
"at the same time, or either one or the other? * Are there",
"both 12 V and 24 V can be used on the controller board.",
"to configure or are the components tolerant to both voltage levels? Also related:",
"time, or either one or the other? * Are there two different electrical",
"tolerant to both voltage levels? Also related: * What is the board used?",
"Following on from [What level of voltage does the Creality Ender-3 run at?](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at/6521#comment9993_6521)",
"are they the same? * Does it auto-detect or are there jumpers used",
"the same time, or either one or the other? * Are there two",
"or are there jumpers used to configure or are the components tolerant to",
"either one or the other? * Are there two different electrical inlets or",
"controller board is used in both configurations in two different printers: * Ender",
"24 V can be used on the controller board. It also goes on",
"that both 12 V and 24 V can be used on the controller",
"other? * Are there two different electrical inlets or are they the same?",
"can be used on the controller board. It also goes on to say",
"goes on to say that the controller board is used in both configurations",
"same time, or either one or the other? * Are there two different",
"the board a proprietary design or a standard third party board? * Does",
"one or the other? * Are there two different electrical inlets or are",
"a standard third party board? * Does anyone have any photos of the",
"levels? Also related: * What is the board used? * Is the board",
"[What level of voltage does the Creality Ender-3 run at?](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at/6521#comment9993_6521) [DupeKx's answer](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at#answer-6521) states",
"both voltages at the same time, or either one or the other? *",
"Does it auto-detect or are there jumpers used to configure or are the",
"What is the board used? * Is the board a proprietary design or",
"from [What level of voltage does the Creality Ender-3 run at?](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at/6521#comment9993_6521) [DupeKx's answer](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at#answer-6521)",
"* CR-10 I would like to know how this dual voltage operation works:",
"the Creality Ender-3 run at?](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at/6521#comment9993_6521) [DupeKx's answer](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at#answer-6521) states that both 12 V and",
"voltages at the same time, or either one or the other? * Are",
"the components tolerant to both voltage levels? Also related: * What is the",
"inlets or are they the same? * Does it auto-detect or are there",
"configurations in two different printers: * Ender 3 and; * CR-10 I would",
"Creality Ender-3 run at?](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at/6521#comment9993_6521) [DupeKx's answer](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at#answer-6521) states that both 12 V and 24",
"also goes on to say that the controller board is used in both",
"board is used in both configurations in two different printers: * Ender 3",
"does the Creality Ender-3 run at?](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at/6521#comment9993_6521) [DupeKx's answer](https://3dprinting.stackexchange.com/questions/6342/what-level-of-voltage-does-the-creality-ender-3-run-at#answer-6521) states that both 12 V",
"3 and; * CR-10 I would like to know how this dual voltage",
"the board used? * Is the board a proprietary design or a standard",
"board used? * Is the board a proprietary design or a standard third",
"voltage levels? Also related: * What is the board used? * Is the",
"jumpers used to configure or are the components tolerant to both voltage levels?",
"Also related: * What is the board used? * Is the board a",
"party board? * Does anyone have any photos of the board and/or schematics?",
"on to say that the controller board is used in both configurations in"
] |
[
"to outgas after printing and being cured. My question relates to this: *",
"[this answer](https://3dprinting.stackexchange.com/a/183/11242), 3d printed materials continue to outgas after printing and being cured.",
"being cured. My question relates to this: * How much does heating the",
"affect out-gassing? * Does the continued out-gassing degrade the stability/quality of the print?",
"know from [this answer](https://3dprinting.stackexchange.com/a/183/11242), 3d printed materials continue to outgas after printing and",
"* How much does heating the printed object after printing (or being cured)",
"outgas after printing and being cured. My question relates to this: * How",
"after printing (or being cured) affect out-gassing? * Does the continued out-gassing degrade",
"question relates to this: * How much does heating the printed object after",
"from [this answer](https://3dprinting.stackexchange.com/a/183/11242), 3d printed materials continue to outgas after printing and being",
"printing and being cured. My question relates to this: * How much does",
"and being cured. My question relates to this: * How much does heating",
"continue to outgas after printing and being cured. My question relates to this:",
"3d printed materials continue to outgas after printing and being cured. My question",
"object after printing (or being cured) affect out-gassing? * Does the continued out-gassing",
"does heating the printed object after printing (or being cured) affect out-gassing? *",
"How much does heating the printed object after printing (or being cured) affect",
"to this: * How much does heating the printed object after printing (or",
"heating the printed object after printing (or being cured) affect out-gassing? * Does",
"printed materials continue to outgas after printing and being cured. My question relates",
"the printed object after printing (or being cured) affect out-gassing? * Does the",
"being cured) affect out-gassing? * Does the continued out-gassing degrade the stability/quality of",
"cured. My question relates to this: * How much does heating the printed",
"printed object after printing (or being cured) affect out-gassing? * Does the continued",
"(or being cured) affect out-gassing? * Does the continued out-gassing degrade the stability/quality",
"materials continue to outgas after printing and being cured. My question relates to",
"answer](https://3dprinting.stackexchange.com/a/183/11242), 3d printed materials continue to outgas after printing and being cured. My",
"cured) affect out-gassing? * Does the continued out-gassing degrade the stability/quality of the",
"this: * How much does heating the printed object after printing (or being",
"much does heating the printed object after printing (or being cured) affect out-gassing?",
"after printing and being cured. My question relates to this: * How much",
"relates to this: * How much does heating the printed object after printing",
"printing (or being cured) affect out-gassing? * Does the continued out-gassing degrade the",
"My question relates to this: * How much does heating the printed object",
"We know from [this answer](https://3dprinting.stackexchange.com/a/183/11242), 3d printed materials continue to outgas after printing"
] |
[
"printers (markforged, desktop metal and a few other industrial ones). Is there any",
"aluminium), but after a short research on google I found only too expensive",
"research on google I found only too expensive printers (markforged, desktop metal and",
"too expensive printers (markforged, desktop metal and a few other industrial ones). Is",
"and a few other industrial ones). Is there any less expensive printer that",
"a short research on google I found only too expensive printers (markforged, desktop",
"only too expensive printers (markforged, desktop metal and a few other industrial ones).",
"found only too expensive printers (markforged, desktop metal and a few other industrial",
"short research on google I found only too expensive printers (markforged, desktop metal",
"wondering about 3D metal printing (steel, aluminium), but after a short research on",
"metal and a few other industrial ones). Is there any less expensive printer",
"desktop metal and a few other industrial ones). Is there any less expensive",
"(markforged, desktop metal and a few other industrial ones). Is there any less",
"on google I found only too expensive printers (markforged, desktop metal and a",
"have been wondering about 3D metal printing (steel, aluminium), but after a short",
"3D metal printing (steel, aluminium), but after a short research on google I",
"been wondering about 3D metal printing (steel, aluminium), but after a short research",
"there any less expensive printer that is able to print metal parts on",
"expensive printers (markforged, desktop metal and a few other industrial ones). Is there",
"I have been wondering about 3D metal printing (steel, aluminium), but after a",
"printing (steel, aluminium), but after a short research on google I found only",
"about 3D metal printing (steel, aluminium), but after a short research on google",
"expensive printer that is able to print metal parts on the market ?",
"any less expensive printer that is able to print metal parts on the",
"other industrial ones). Is there any less expensive printer that is able to",
"Is there any less expensive printer that is able to print metal parts",
"google I found only too expensive printers (markforged, desktop metal and a few",
"I found only too expensive printers (markforged, desktop metal and a few other",
"but after a short research on google I found only too expensive printers",
"after a short research on google I found only too expensive printers (markforged,",
"(steel, aluminium), but after a short research on google I found only too",
"ones). Is there any less expensive printer that is able to print metal",
"metal printing (steel, aluminium), but after a short research on google I found",
"less expensive printer that is able to print metal parts on the market",
"industrial ones). Is there any less expensive printer that is able to print",
"a few other industrial ones). Is there any less expensive printer that is",
"few other industrial ones). Is there any less expensive printer that is able"
] |
[
"(as opposed to the >€2000 semi-professional lab budget prototyping class), or were the",
"I realise that early popularity would grow exponentially, but I'm thinking particularly at",
"of these kit machines also suitable/adopted by hobbyists? I realise that early popularity",
"in the <€300 price range, as price-reduced clones of designs which had already",
"seen several iterations. Was this the start of the break-out of cheap FDM",
"Was this the start of the break-out of cheap FDM machines (as opposed",
"of the break-out of cheap FDM machines (as opposed to the >€2000 semi-professional",
"this the start of the break-out of cheap FDM machines (as opposed to",
"exponentially, but I'm thinking particularly at what point people could build a printer",
"of cheap FDM machines (as opposed to the >€2000 semi-professional lab budget prototyping",
"a printer without needing to compile their own firmware, solder any boards, etc.",
"that SLA came first (in the 1980's?), and FDM development was probably held",
"I'm thinking particularly at what point people could build a printer without needing",
"very little about the history of 3D printing, except that SLA came first",
"price kit machines were available to hobbyists, in the <€300 price range, as",
"very low price kit machines were available to hobbyists, in the <€300 price",
"kit machines were available to hobbyists, in the <€300 price range, as price-reduced",
"prototyping class), or were the earlier iterations of these kit machines also suitable/adopted",
"as price-reduced clones of designs which had already seen several iterations. Was this",
"history of 3D printing, except that SLA came first (in the 1980's?), and",
"that early popularity would grow exponentially, but I'm thinking particularly at what point",
"of 3D printing, except that SLA came first (in the 1980's?), and FDM",
"early popularity would grow exponentially, but I'm thinking particularly at what point people",
"little about the history of 3D printing, except that SLA came first (in",
"1980's?), and FDM development was probably held back by patents. By 2016, very",
"but I'm thinking particularly at what point people could build a printer without",
"probably held back by patents. By 2016, very low price kit machines were",
"patents. By 2016, very low price kit machines were available to hobbyists, in",
"By 2016, very low price kit machines were available to hobbyists, in the",
"the history of 3D printing, except that SLA came first (in the 1980's?),",
"which had already seen several iterations. Was this the start of the break-out",
"available to hobbyists, in the <€300 price range, as price-reduced clones of designs",
"machines were available to hobbyists, in the <€300 price range, as price-reduced clones",
"iterations of these kit machines also suitable/adopted by hobbyists? I realise that early",
"particularly at what point people could build a printer without needing to compile",
"were the earlier iterations of these kit machines also suitable/adopted by hobbyists? I",
"first (in the 1980's?), and FDM development was probably held back by patents.",
"<€300 price range, as price-reduced clones of designs which had already seen several",
"lab budget prototyping class), or were the earlier iterations of these kit machines",
"start of the break-out of cheap FDM machines (as opposed to the >€2000",
"would grow exponentially, but I'm thinking particularly at what point people could build",
"build a printer without needing to compile their own firmware, solder any boards,",
"(in the 1980's?), and FDM development was probably held back by patents. By",
"came first (in the 1980's?), and FDM development was probably held back by",
"hobbyists, in the <€300 price range, as price-reduced clones of designs which had",
"the earlier iterations of these kit machines also suitable/adopted by hobbyists? I realise",
"price range, as price-reduced clones of designs which had already seen several iterations.",
"by patents. By 2016, very low price kit machines were available to hobbyists,",
"development was probably held back by patents. By 2016, very low price kit",
"the break-out of cheap FDM machines (as opposed to the >€2000 semi-professional lab",
"the start of the break-out of cheap FDM machines (as opposed to the",
"clones of designs which had already seen several iterations. Was this the start",
"had already seen several iterations. Was this the start of the break-out of",
"and FDM development was probably held back by patents. By 2016, very low",
"back by patents. By 2016, very low price kit machines were available to",
"about the history of 3D printing, except that SLA came first (in the",
"or were the earlier iterations of these kit machines also suitable/adopted by hobbyists?",
"I know very little about the history of 3D printing, except that SLA",
"also suitable/adopted by hobbyists? I realise that early popularity would grow exponentially, but",
"cheap FDM machines (as opposed to the >€2000 semi-professional lab budget prototyping class),",
"popularity would grow exponentially, but I'm thinking particularly at what point people could",
"iterations. Was this the start of the break-out of cheap FDM machines (as",
"3D printing, except that SLA came first (in the 1980's?), and FDM development",
"FDM machines (as opposed to the >€2000 semi-professional lab budget prototyping class), or",
"machines also suitable/adopted by hobbyists? I realise that early popularity would grow exponentially,",
"to the >€2000 semi-professional lab budget prototyping class), or were the earlier iterations",
"SLA came first (in the 1980's?), and FDM development was probably held back",
"class), or were the earlier iterations of these kit machines also suitable/adopted by",
"what point people could build a printer without needing to compile their own",
"the 1980's?), and FDM development was probably held back by patents. By 2016,",
"designs which had already seen several iterations. Was this the start of the",
"point people could build a printer without needing to compile their own firmware,",
"held back by patents. By 2016, very low price kit machines were available",
"were available to hobbyists, in the <€300 price range, as price-reduced clones of",
"realise that early popularity would grow exponentially, but I'm thinking particularly at what",
"printing, except that SLA came first (in the 1980's?), and FDM development was",
"hobbyists? I realise that early popularity would grow exponentially, but I'm thinking particularly",
"several iterations. Was this the start of the break-out of cheap FDM machines",
"people could build a printer without needing to compile their own firmware, solder",
"semi-professional lab budget prototyping class), or were the earlier iterations of these kit",
"could build a printer without needing to compile their own firmware, solder any",
"to hobbyists, in the <€300 price range, as price-reduced clones of designs which",
"price-reduced clones of designs which had already seen several iterations. Was this the",
">€2000 semi-professional lab budget prototyping class), or were the earlier iterations of these",
"grow exponentially, but I'm thinking particularly at what point people could build a",
"was probably held back by patents. By 2016, very low price kit machines",
"know very little about the history of 3D printing, except that SLA came",
"low price kit machines were available to hobbyists, in the <€300 price range,",
"except that SLA came first (in the 1980's?), and FDM development was probably",
"the >€2000 semi-professional lab budget prototyping class), or were the earlier iterations of",
"kit machines also suitable/adopted by hobbyists? I realise that early popularity would grow",
"suitable/adopted by hobbyists? I realise that early popularity would grow exponentially, but I'm",
"the <€300 price range, as price-reduced clones of designs which had already seen",
"these kit machines also suitable/adopted by hobbyists? I realise that early popularity would",
"at what point people could build a printer without needing to compile their",
"thinking particularly at what point people could build a printer without needing to",
"opposed to the >€2000 semi-professional lab budget prototyping class), or were the earlier",
"2016, very low price kit machines were available to hobbyists, in the <€300",
"already seen several iterations. Was this the start of the break-out of cheap",
"FDM development was probably held back by patents. By 2016, very low price",
"by hobbyists? I realise that early popularity would grow exponentially, but I'm thinking",
"of designs which had already seen several iterations. Was this the start of",
"break-out of cheap FDM machines (as opposed to the >€2000 semi-professional lab budget",
"earlier iterations of these kit machines also suitable/adopted by hobbyists? I realise that",
"budget prototyping class), or were the earlier iterations of these kit machines also",
"machines (as opposed to the >€2000 semi-professional lab budget prototyping class), or were",
"range, as price-reduced clones of designs which had already seen several iterations. Was"
] |
[
"clean. This happens consistently every time I print any object. The perfectly printed",
"I place a raft or a brim below/around the print - the raft",
"every time I print any object. The perfectly printed raft can be seen",
"out totally fine with the exception of the first layer. Here's the weird",
"2 and my print comes out totally fine with the exception of the",
"that first ugly layer of the actual print, the rest of the print",
"Following that first ugly layer of the actual print, the rest of the",
"Creality Ender 2 and my print comes out totally fine with the exception",
"can be seen on the left. Be sure to click the image to",
"the right and the ugly first layer that printed on top of that",
"a brim below/around the print - the raft or brim will print perfectly",
"with the Creality Ender 2 and my print comes out totally fine with",
"first layer. Here's the weird part though, if I place a raft or",
"comes out ugly, as seen in the photo below, but the raft itself",
"[![Ugly first layer and raft](https://i.stack.imgur.com/z1Kem.jpg \"Ugly first layer and raft\")](https://i.stack.imgur.com/z1Kem.jpg \"Ugly first layer",
"the rest of the print will be 100% clean. This happens consistently every",
"printed on top of that raft can be seen on the left. Be",
"on the right and the ugly first layer that printed on top of",
"a raft or a brim below/around the print - the raft or brim",
"layer and raft](https://i.stack.imgur.com/z1Kem.jpg \"Ugly first layer and raft\")](https://i.stack.imgur.com/z1Kem.jpg \"Ugly first layer and raft\")",
"very first layer of the actual print comes out ugly, as seen in",
"left. Be sure to click the image to see the details of what",
"printed. Following that first ugly layer of the actual print, the rest of",
"print comes out ugly, as seen in the photo below, but the raft",
"that raft can be seen on the left. Be sure to click the",
"the exception of the first layer. Here's the weird part though, if I",
"ugly first layer that printed on top of that raft can be seen",
"be 100% clean. This happens consistently every time I print any object. The",
"of the print will be 100% clean. This happens consistently every time I",
"raft or brim will print perfectly cleanly. Even on a raft though, the",
"mean. [![Ugly first layer and raft](https://i.stack.imgur.com/z1Kem.jpg \"Ugly first layer and raft\")](https://i.stack.imgur.com/z1Kem.jpg \"Ugly first",
"print - the raft or brim will print perfectly cleanly. Even on a",
"PLA with the Creality Ender 2 and my print comes out totally fine",
"printed raft can be seen on the right and the ugly first layer",
"the Creality Ender 2 and my print comes out totally fine with the",
"fine with the exception of the first layer. Here's the weird part though,",
"below, but the raft itself will be perfectly printed. Following that first ugly",
"top of that raft can be seen on the left. Be sure to",
"photo below, but the raft itself will be perfectly printed. Following that first",
"on a raft though, the very first layer of the actual print comes",
"be seen on the right and the ugly first layer that printed on",
"print perfectly cleanly. Even on a raft though, the very first layer of",
"though, if I place a raft or a brim below/around the print -",
"This happens consistently every time I print any object. The perfectly printed raft",
"click the image to see the details of what I mean. [![Ugly first",
"the ugly first layer that printed on top of that raft can be",
"weird part though, if I place a raft or a brim below/around the",
"place a raft or a brim below/around the print - the raft or",
"seen on the left. Be sure to click the image to see the",
"of what I mean. [![Ugly first layer and raft](https://i.stack.imgur.com/z1Kem.jpg \"Ugly first layer and",
"print, the rest of the print will be 100% clean. This happens consistently",
"be perfectly printed. Following that first ugly layer of the actual print, the",
"if I place a raft or a brim below/around the print - the",
"- the raft or brim will print perfectly cleanly. Even on a raft",
"out ugly, as seen in the photo below, but the raft itself will",
"Be sure to click the image to see the details of what I",
"on top of that raft can be seen on the left. Be sure",
"to see the details of what I mean. [![Ugly first layer and raft](https://i.stack.imgur.com/z1Kem.jpg",
"raft can be seen on the left. Be sure to click the image",
"brim will print perfectly cleanly. Even on a raft though, the very first",
"Even on a raft though, the very first layer of the actual print",
"can be seen on the right and the ugly first layer that printed",
"the details of what I mean. [![Ugly first layer and raft](https://i.stack.imgur.com/z1Kem.jpg \"Ugly first",
"or brim will print perfectly cleanly. Even on a raft though, the very",
"in the photo below, but the raft itself will be perfectly printed. Following",
"a raft though, the very first layer of the actual print comes out",
"and the ugly first layer that printed on top of that raft can",
"the print will be 100% clean. This happens consistently every time I print",
"perfectly cleanly. Even on a raft though, the very first layer of the",
"the raft itself will be perfectly printed. Following that first ugly layer of",
"sure to click the image to see the details of what I mean.",
"rest of the print will be 100% clean. This happens consistently every time",
"the very first layer of the actual print comes out ugly, as seen",
"of that raft can be seen on the left. Be sure to click",
"Here's the weird part though, if I place a raft or a brim",
"itself will be perfectly printed. Following that first ugly layer of the actual",
"or a brim below/around the print - the raft or brim will print",
"seen on the right and the ugly first layer that printed on top",
"the first layer. Here's the weird part though, if I place a raft",
"my print comes out totally fine with the exception of the first layer.",
"of the actual print comes out ugly, as seen in the photo below,",
"though, the very first layer of the actual print comes out ugly, as",
"will be perfectly printed. Following that first ugly layer of the actual print,",
"layer. Here's the weird part though, if I place a raft or a",
"ugly layer of the actual print, the rest of the print will be",
"print any object. The perfectly printed raft can be seen on the right",
"to click the image to see the details of what I mean. [![Ugly",
"consistently every time I print any object. The perfectly printed raft can be",
"see the details of what I mean. [![Ugly first layer and raft](https://i.stack.imgur.com/z1Kem.jpg \"Ugly",
"first layer of the actual print comes out ugly, as seen in the",
"first layer that printed on top of that raft can be seen on",
"ugly, as seen in the photo below, but the raft itself will be",
"I'm printing PLA with the Creality Ender 2 and my print comes out",
"below/around the print - the raft or brim will print perfectly cleanly. Even",
"right and the ugly first layer that printed on top of that raft",
"on the left. Be sure to click the image to see the details",
"and my print comes out totally fine with the exception of the first",
"part though, if I place a raft or a brim below/around the print",
"layer that printed on top of that raft can be seen on the",
"comes out totally fine with the exception of the first layer. Here's the",
"Ender 2 and my print comes out totally fine with the exception of",
"what I mean. [![Ugly first layer and raft](https://i.stack.imgur.com/z1Kem.jpg \"Ugly first layer and raft\")](https://i.stack.imgur.com/z1Kem.jpg",
"print will be 100% clean. This happens consistently every time I print any",
"actual print comes out ugly, as seen in the photo below, but the",
"happens consistently every time I print any object. The perfectly printed raft can",
"perfectly printed. Following that first ugly layer of the actual print, the rest",
"as seen in the photo below, but the raft itself will be perfectly",
"seen in the photo below, but the raft itself will be perfectly printed.",
"layer of the actual print comes out ugly, as seen in the photo",
"any object. The perfectly printed raft can be seen on the right and",
"first ugly layer of the actual print, the rest of the print will",
"raft or a brim below/around the print - the raft or brim will",
"object. The perfectly printed raft can be seen on the right and the",
"the weird part though, if I place a raft or a brim below/around",
"layer of the actual print, the rest of the print will be 100%",
"The perfectly printed raft can be seen on the right and the ugly",
"brim below/around the print - the raft or brim will print perfectly cleanly.",
"will be 100% clean. This happens consistently every time I print any object.",
"that printed on top of that raft can be seen on the left.",
"details of what I mean. [![Ugly first layer and raft](https://i.stack.imgur.com/z1Kem.jpg \"Ugly first layer",
"but the raft itself will be perfectly printed. Following that first ugly layer",
"exception of the first layer. Here's the weird part though, if I place",
"raft can be seen on the right and the ugly first layer that",
"the photo below, but the raft itself will be perfectly printed. Following that",
"printing PLA with the Creality Ender 2 and my print comes out totally",
"raft itself will be perfectly printed. Following that first ugly layer of the",
"actual print, the rest of the print will be 100% clean. This happens",
"I mean. [![Ugly first layer and raft](https://i.stack.imgur.com/z1Kem.jpg \"Ugly first layer and raft\")](https://i.stack.imgur.com/z1Kem.jpg \"Ugly",
"print comes out totally fine with the exception of the first layer. Here's",
"be seen on the left. Be sure to click the image to see",
"the raft or brim will print perfectly cleanly. Even on a raft though,",
"will print perfectly cleanly. Even on a raft though, the very first layer",
"first layer and raft](https://i.stack.imgur.com/z1Kem.jpg \"Ugly first layer and raft\")](https://i.stack.imgur.com/z1Kem.jpg \"Ugly first layer and",
"the print - the raft or brim will print perfectly cleanly. Even on",
"perfectly printed raft can be seen on the right and the ugly first",
"the actual print, the rest of the print will be 100% clean. This",
"I print any object. The perfectly printed raft can be seen on the",
"the actual print comes out ugly, as seen in the photo below, but",
"cleanly. Even on a raft though, the very first layer of the actual",
"time I print any object. The perfectly printed raft can be seen on",
"100% clean. This happens consistently every time I print any object. The perfectly",
"the image to see the details of what I mean. [![Ugly first layer",
"image to see the details of what I mean. [![Ugly first layer and",
"raft though, the very first layer of the actual print comes out ugly,",
"totally fine with the exception of the first layer. Here's the weird part",
"of the actual print, the rest of the print will be 100% clean.",
"of the first layer. Here's the weird part though, if I place a",
"the left. Be sure to click the image to see the details of",
"with the exception of the first layer. Here's the weird part though, if"
] |
[
"πr², we get the area of the filament in square millimeters (rounding to",
"m = 112 m which is close enough to 110 m. BUT as",
"to 110 m. BUT as all makers of filament and makers of extruders",
"that the 3.00 mm diameter is not what is really so; it's actually",
"decimal points) For 1.75 it's 2.41 mm² For 3.00 it's 7.07 mm² Then",
"that the 330 and 110 would be inaccurate given the dimensions of 1.75",
"dimensions of 1.75 and 3.00. Rather, my point is that the 3.00 mm",
"the filament in square millimeters (rounding to two decimal points) For 1.75 it's",
"which is at least 120 m. So, whoever calculated the approximation of 110",
"points) For 1.75 it's 2.41 mm² For 3.00 it's 7.07 mm² Then taking",
"that: For 2.85 it's 6.38 mm² and: (2.41/6.38) \\* 330 m = 125",
"Using πr², we get the area of the filament in square millimeters (rounding",
"am I missing here? My point is not that the 330 and 110",
"What am I missing here? My point is not that the 330 and",
"Now do that: For 2.85 it's 6.38 mm² and: (2.41/6.38) \\* 330 m",
"m which is close enough to 110 m. BUT as all makers of",
"real dimension, which is 2.85 mm. Now do that: For 2.85 it's 6.38",
"missing here? My point is not that the 330 and 110 would be",
"to two decimal points) For 1.75 it's 2.41 mm² For 3.00 it's 7.07",
"2.41 mm² For 3.00 it's 7.07 mm² Then taking the ratio and multiplying:",
"enough to 110 m. BUT as all makers of filament and makers of",
"than actual dimension. What am I missing here? My point is not that",
"it's 7.07 mm² Then taking the ratio and multiplying: (2.41/7.07) \\* 330 m",
"and makers of extruders know, 3.00 mm is just a rounding off of",
"close enough to 110 m. BUT as all makers of filament and makers",
"estimates for 1.75 and 3.0 mm spools (of PLA, presumably). But a moment's",
"calculated the approximation of 110 m did the calculation based on the rounded",
"diameter is not what is really so; it's actually 2.85 mm and therefore",
"here? My point is not that the 330 and 110 would be inaccurate",
"is that the 3.00 mm diameter is not what is really so; it's",
"3.00. Rather, my point is that the 3.00 mm diameter is not what",
"mm² For 3.00 it's 7.07 mm² Then taking the ratio and multiplying: (2.41/7.07)",
"= 125 m which is at least 120 m. So, whoever calculated the",
"not what is really so; it's actually 2.85 mm and therefore the answer",
"least 120 m. So, whoever calculated the approximation of 110 m did the",
"\\* 330 m = 112 m which is close enough to 110 m.",
"so; it's actually 2.85 mm and therefore the answer is longer than 110",
"3.00 mm is just a rounding off of the real dimension, which is",
"For 2.85 it's 6.38 mm² and: (2.41/6.38) \\* 330 m = 125 m",
"I missing here? My point is not that the 330 and 110 would",
"m did the calculation based on the rounded rather than actual dimension. What",
"For 3.00 it's 7.07 mm² Then taking the ratio and multiplying: (2.41/7.07) \\*",
"be inaccurate given the dimensions of 1.75 and 3.00. Rather, my point is",
"of 1.75 and 3.00. Rather, my point is that the 3.00 mm diameter",
"110 m did the calculation based on the rounded rather than actual dimension.",
"seeing the 330 m and 110 m length estimates for 1.75 and 3.0",
"obvious question. Using πr², we get the area of the filament in square",
"110 m length estimates for 1.75 and 3.0 mm spools (of PLA, presumably).",
"ratio and multiplying: (2.41/7.07) \\* 330 m = 112 m which is close",
"the rounded rather than actual dimension. What am I missing here? My point",
"110 would be inaccurate given the dimensions of 1.75 and 3.00. Rather, my",
"112 m which is close enough to 110 m. BUT as all makers",
"3.00 mm diameter is not what is really so; it's actually 2.85 mm",
"not that the 330 and 110 would be inaccurate given the dimensions of",
"of the filament in square millimeters (rounding to two decimal points) For 1.75",
"mm. Now do that: For 2.85 it's 6.38 mm² and: (2.41/6.38) \\* 330",
"thought staring at that will raise an obvious question. Using πr², we get",
"staring at that will raise an obvious question. Using πr², we get the",
"of 110 m did the calculation based on the rounded rather than actual",
"(rounding to two decimal points) For 1.75 it's 2.41 mm² For 3.00 it's",
"330 and 110 would be inaccurate given the dimensions of 1.75 and 3.00.",
"110 m. BUT as all makers of filament and makers of extruders know,",
"the ratio and multiplying: (2.41/7.07) \\* 330 m = 112 m which is",
"rounding off of the real dimension, which is 2.85 mm. Now do that:",
"point is that the 3.00 mm diameter is not what is really so;",
"whoever calculated the approximation of 110 m did the calculation based on the",
"(2.41/7.07) \\* 330 m = 112 m which is close enough to 110",
"in square millimeters (rounding to two decimal points) For 1.75 it's 2.41 mm²",
"125 m which is at least 120 m. So, whoever calculated the approximation",
"is at least 120 m. So, whoever calculated the approximation of 110 m",
"question. Using πr², we get the area of the filament in square millimeters",
"Then taking the ratio and multiplying: (2.41/7.07) \\* 330 m = 112 m",
"the 330 and 110 would be inaccurate given the dimensions of 1.75 and",
"know, 3.00 mm is just a rounding off of the real dimension, which",
"mm is just a rounding off of the real dimension, which is 2.85",
"m and 110 m length estimates for 1.75 and 3.0 mm spools (of",
"6.38 mm² and: (2.41/6.38) \\* 330 m = 125 m which is at",
"all makers of filament and makers of extruders know, 3.00 mm is just",
"mm spools (of PLA, presumably). But a moment's thought staring at that will",
"an obvious question. Using πr², we get the area of the filament in",
"is 2.85 mm. Now do that: For 2.85 it's 6.38 mm² and: (2.41/6.38)",
"is not that the 330 and 110 would be inaccurate given the dimensions",
"mm² Then taking the ratio and multiplying: (2.41/7.07) \\* 330 m = 112",
"and: (2.41/6.38) \\* 330 m = 125 m which is at least 120",
"given the dimensions of 1.75 and 3.00. Rather, my point is that the",
"and 110 would be inaccurate given the dimensions of 1.75 and 3.00. Rather,",
"multiplying: (2.41/7.07) \\* 330 m = 112 m which is close enough to",
"the approximation of 110 m did the calculation based on the rounded rather",
"did the calculation based on the rounded rather than actual dimension. What am",
"taking the ratio and multiplying: (2.41/7.07) \\* 330 m = 112 m which",
"PLA, presumably). But a moment's thought staring at that will raise an obvious",
"we get the area of the filament in square millimeters (rounding to two",
"do that: For 2.85 it's 6.38 mm² and: (2.41/6.38) \\* 330 m =",
"is really so; it's actually 2.85 mm and therefore the answer is longer",
"But a moment's thought staring at that will raise an obvious question. Using",
"(of PLA, presumably). But a moment's thought staring at that will raise an",
"a rounding off of the real dimension, which is 2.85 mm. Now do",
"it's 6.38 mm² and: (2.41/6.38) \\* 330 m = 125 m which is",
"approximation of 110 m did the calculation based on the rounded rather than",
"dimension. What am I missing here? My point is not that the 330",
"of the real dimension, which is 2.85 mm. Now do that: For 2.85",
"actual dimension. What am I missing here? My point is not that the",
"= 112 m which is close enough to 110 m. BUT as all",
"2.85 it's 6.38 mm² and: (2.41/6.38) \\* 330 m = 125 m which",
"makers of filament and makers of extruders know, 3.00 mm is just a",
"it's actually 2.85 mm and therefore the answer is longer than 110 m.",
"a moment's thought staring at that will raise an obvious question. Using πr²,",
"moment's thought staring at that will raise an obvious question. Using πr², we",
"my point is that the 3.00 mm diameter is not what is really",
"m. BUT as all makers of filament and makers of extruders know, 3.00",
"m = 125 m which is at least 120 m. So, whoever calculated",
"Rather, my point is that the 3.00 mm diameter is not what is",
"BUT as all makers of filament and makers of extruders know, 3.00 mm",
"spools (of PLA, presumably). But a moment's thought staring at that will raise",
"1.75 it's 2.41 mm² For 3.00 it's 7.07 mm² Then taking the ratio",
"based on the rounded rather than actual dimension. What am I missing here?",
"the 3.00 mm diameter is not what is really so; it's actually 2.85",
"square millimeters (rounding to two decimal points) For 1.75 it's 2.41 mm² For",
"1.75 and 3.0 mm spools (of PLA, presumably). But a moment's thought staring",
"which is close enough to 110 m. BUT as all makers of filament",
"length estimates for 1.75 and 3.0 mm spools (of PLA, presumably). But a",
"as all makers of filament and makers of extruders know, 3.00 mm is",
"filament and makers of extruders know, 3.00 mm is just a rounding off",
"m length estimates for 1.75 and 3.0 mm spools (of PLA, presumably). But",
"millimeters (rounding to two decimal points) For 1.75 it's 2.41 mm² For 3.00",
"presumably). But a moment's thought staring at that will raise an obvious question.",
"So, whoever calculated the approximation of 110 m did the calculation based on",
"filament in square millimeters (rounding to two decimal points) For 1.75 it's 2.41",
"extruders know, 3.00 mm is just a rounding off of the real dimension,",
"is just a rounding off of the real dimension, which is 2.85 mm.",
"the calculation based on the rounded rather than actual dimension. What am I",
"330 m and 110 m length estimates for 1.75 and 3.0 mm spools",
"m. So, whoever calculated the approximation of 110 m did the calculation based",
"3.0 mm spools (of PLA, presumably). But a moment's thought staring at that",
"for 1.75 and 3.0 mm spools (of PLA, presumably). But a moment's thought",
"at that will raise an obvious question. Using πr², we get the area",
"m which is at least 120 m. So, whoever calculated the approximation of",
"on the rounded rather than actual dimension. What am I missing here? My",
"and 3.00. Rather, my point is that the 3.00 mm diameter is not",
"the 330 m and 110 m length estimates for 1.75 and 3.0 mm",
"which is 2.85 mm. Now do that: For 2.85 it's 6.38 mm² and:",
"really so; it's actually 2.85 mm and therefore the answer is longer than",
"inaccurate given the dimensions of 1.75 and 3.00. Rather, my point is that",
"mm diameter is not what is really so; it's actually 2.85 mm and",
"will raise an obvious question. Using πr², we get the area of the",
"For 1.75 it's 2.41 mm² For 3.00 it's 7.07 mm² Then taking the",
"calculation based on the rounded rather than actual dimension. What am I missing",
"2.85 mm. Now do that: For 2.85 it's 6.38 mm² and: (2.41/6.38) \\*",
"the area of the filament in square millimeters (rounding to two decimal points)",
"point is not that the 330 and 110 would be inaccurate given the",
"been seeing the 330 m and 110 m length estimates for 1.75 and",
"at least 120 m. So, whoever calculated the approximation of 110 m did",
"3.00 it's 7.07 mm² Then taking the ratio and multiplying: (2.41/7.07) \\* 330",
"is not what is really so; it's actually 2.85 mm and therefore the",
"get the area of the filament in square millimeters (rounding to two decimal",
"off of the real dimension, which is 2.85 mm. Now do that: For",
"I've been seeing the 330 m and 110 m length estimates for 1.75",
"that will raise an obvious question. Using πr², we get the area of",
"rather than actual dimension. What am I missing here? My point is not",
"dimension, which is 2.85 mm. Now do that: For 2.85 it's 6.38 mm²",
"and 110 m length estimates for 1.75 and 3.0 mm spools (of PLA,",
"of extruders know, 3.00 mm is just a rounding off of the real",
"the real dimension, which is 2.85 mm. Now do that: For 2.85 it's",
"and 3.0 mm spools (of PLA, presumably). But a moment's thought staring at",
"330 m = 112 m which is close enough to 110 m. BUT",
"7.07 mm² Then taking the ratio and multiplying: (2.41/7.07) \\* 330 m =",
"and multiplying: (2.41/7.07) \\* 330 m = 112 m which is close enough",
"just a rounding off of the real dimension, which is 2.85 mm. Now",
"area of the filament in square millimeters (rounding to two decimal points) For",
"raise an obvious question. Using πr², we get the area of the filament",
"would be inaccurate given the dimensions of 1.75 and 3.00. Rather, my point",
"1.75 and 3.00. Rather, my point is that the 3.00 mm diameter is",
"\\* 330 m = 125 m which is at least 120 m. So,",
"rounded rather than actual dimension. What am I missing here? My point is",
"My point is not that the 330 and 110 would be inaccurate given",
"it's 2.41 mm² For 3.00 it's 7.07 mm² Then taking the ratio and",
"(2.41/6.38) \\* 330 m = 125 m which is at least 120 m.",
"two decimal points) For 1.75 it's 2.41 mm² For 3.00 it's 7.07 mm²",
"mm² and: (2.41/6.38) \\* 330 m = 125 m which is at least",
"120 m. So, whoever calculated the approximation of 110 m did the calculation",
"makers of extruders know, 3.00 mm is just a rounding off of the",
"is close enough to 110 m. BUT as all makers of filament and",
"the dimensions of 1.75 and 3.00. Rather, my point is that the 3.00",
"330 m = 125 m which is at least 120 m. So, whoever",
"of filament and makers of extruders know, 3.00 mm is just a rounding",
"what is really so; it's actually 2.85 mm and therefore the answer is"
] |
[
"points, but has anyone compiled a list of empty weights from various manufacturers",
"weighs. Not having emptied any spool yet, I can't contribute data points, but",
"I knew in advance how much the ***empty*** filament spool weighs. Not having",
"can't contribute data points, but has anyone compiled a list of empty weights",
"***empty*** filament spool weighs. Not having emptied any spool yet, I can't contribute",
"be helpful to me if I knew in advance how much the ***empty***",
"contribute data points, but has anyone compiled a list of empty weights from",
"I can't contribute data points, but has anyone compiled a list of empty",
"having emptied any spool yet, I can't contribute data points, but has anyone",
"advance how much the ***empty*** filament spool weighs. Not having emptied any spool",
"the ***empty*** filament spool weighs. Not having emptied any spool yet, I can't",
"It would be helpful to me if I knew in advance how much",
"spool weighs. Not having emptied any spool yet, I can't contribute data points,",
"any spool yet, I can't contribute data points, but has anyone compiled a",
"has anyone compiled a list of empty weights from various manufacturers and sizes?",
"me if I knew in advance how much the ***empty*** filament spool weighs.",
"spool yet, I can't contribute data points, but has anyone compiled a list",
"would be helpful to me if I knew in advance how much the",
"how much the ***empty*** filament spool weighs. Not having emptied any spool yet,",
"data points, but has anyone compiled a list of empty weights from various",
"knew in advance how much the ***empty*** filament spool weighs. Not having emptied",
"emptied any spool yet, I can't contribute data points, but has anyone compiled",
"Not having emptied any spool yet, I can't contribute data points, but has",
"but has anyone compiled a list of empty weights from various manufacturers and",
"to me if I knew in advance how much the ***empty*** filament spool",
"if I knew in advance how much the ***empty*** filament spool weighs. Not",
"in advance how much the ***empty*** filament spool weighs. Not having emptied any",
"yet, I can't contribute data points, but has anyone compiled a list of",
"helpful to me if I knew in advance how much the ***empty*** filament",
"filament spool weighs. Not having emptied any spool yet, I can't contribute data",
"much the ***empty*** filament spool weighs. Not having emptied any spool yet, I"
] |
[
"Elsewhere, I see warnings not to oil your filament to make it go",
"So, if I use the 608's, will oil leak on the filament, and",
"make it go through the extruder better, because problems going through mean something",
"warnings not to oil your filament to make it go through the extruder",
"not to oil your filament to make it go through the extruder better,",
"and it's better to fix the other thing. So, if I use the",
"see plans for various spool holders, either for PLA in the open, or",
"spool holders, either for PLA in the open, or for whatever filament in",
"I see warnings not to oil your filament to make it go through",
"to make it go through the extruder better, because problems going through mean",
"because problems going through mean something else is wrong, and it's better to",
"the other thing. So, if I use the 608's, will oil leak on",
"for whatever filament in a dry box, that use 608 bearings. Elsewhere, I",
"use 608 bearings. Elsewhere, I see warnings not to oil your filament to",
"PLA in the open, or for whatever filament in a dry box, that",
"plans for various spool holders, either for PLA in the open, or for",
"it go through the extruder better, because problems going through mean something else",
"various spool holders, either for PLA in the open, or for whatever filament",
"either for PLA in the open, or for whatever filament in a dry",
"wrong, and it's better to fix the other thing. So, if I use",
"a dry box, that use 608 bearings. Elsewhere, I see warnings not to",
"I see plans for various spool holders, either for PLA in the open,",
"holders, either for PLA in the open, or for whatever filament in a",
"608 bearings. Elsewhere, I see warnings not to oil your filament to make",
"or for whatever filament in a dry box, that use 608 bearings. Elsewhere,",
"see warnings not to oil your filament to make it go through the",
"mean something else is wrong, and it's better to fix the other thing.",
"else is wrong, and it's better to fix the other thing. So, if",
"better, because problems going through mean something else is wrong, and it's better",
"whatever filament in a dry box, that use 608 bearings. Elsewhere, I see",
"your filament to make it go through the extruder better, because problems going",
"something else is wrong, and it's better to fix the other thing. So,",
"in a dry box, that use 608 bearings. Elsewhere, I see warnings not",
"filament in a dry box, that use 608 bearings. Elsewhere, I see warnings",
"through mean something else is wrong, and it's better to fix the other",
"box, that use 608 bearings. Elsewhere, I see warnings not to oil your",
"is wrong, and it's better to fix the other thing. So, if I",
"the open, or for whatever filament in a dry box, that use 608",
"it's better to fix the other thing. So, if I use the 608's,",
"if I use the 608's, will oil leak on the filament, and is",
"I use the 608's, will oil leak on the filament, and is this",
"to fix the other thing. So, if I use the 608's, will oil",
"for PLA in the open, or for whatever filament in a dry box,",
"use the 608's, will oil leak on the filament, and is this bad?",
"filament to make it go through the extruder better, because problems going through",
"for various spool holders, either for PLA in the open, or for whatever",
"in the open, or for whatever filament in a dry box, that use",
"extruder better, because problems going through mean something else is wrong, and it's",
"through the extruder better, because problems going through mean something else is wrong,",
"open, or for whatever filament in a dry box, that use 608 bearings.",
"fix the other thing. So, if I use the 608's, will oil leak",
"going through mean something else is wrong, and it's better to fix the",
"the extruder better, because problems going through mean something else is wrong, and",
"thing. So, if I use the 608's, will oil leak on the filament,",
"go through the extruder better, because problems going through mean something else is",
"problems going through mean something else is wrong, and it's better to fix",
"dry box, that use 608 bearings. Elsewhere, I see warnings not to oil",
"better to fix the other thing. So, if I use the 608's, will",
"bearings. Elsewhere, I see warnings not to oil your filament to make it",
"to oil your filament to make it go through the extruder better, because",
"other thing. So, if I use the 608's, will oil leak on the",
"that use 608 bearings. Elsewhere, I see warnings not to oil your filament",
"oil your filament to make it go through the extruder better, because problems"
] |
[
"to use with my still-in-transit Ender 3. Since the bed came in before",
"does change shape, should it be put with the dish side up or",
"with the dish side up or down? Logic would say that if it",
"while the top is slightly cooler, so in theory the bottom may expand",
"likely that the glass may change shape slightly as it is heated? If",
"bottom line is, should I send the glass back as defective or wait",
"up or down? Logic would say that if it does change shape, the",
"the bed came in before the printer, I pulled it out and used",
"that if it does change shape, the bottom would probably get hotter since",
"flat the glass surface is. It appears the glass is slightly \"dished\" in",
"dish side up or down? Logic would say that if it does change",
"would probably get hotter since it is against the heater while the top",
"if this is a sign of a defective glass, or if it is",
"probably get hotter since it is against the heater while the top is",
"or down? Logic would say that if it does change shape, the bottom",
"I pulled it out and used a flat edge ruler to see how",
"if it is likely that the glass may change shape slightly as it",
"side. I am wondering if this is a sign of a defective glass,",
"printer, I pulled it out and used a flat edge ruler to see",
"in the center on the other side. I am wondering if this is",
"am wondering if this is a sign of a defective glass, or if",
"use with my still-in-transit Ender 3. Since the bed came in before the",
"back as defective or wait until the printer arrives and see what happens",
"as it is heated? If it does change shape, should it be put",
"wait until the printer arrives and see what happens when I heat it",
"as defective or wait until the printer arrives and see what happens when",
"see how flat the glass surface is. It appears the glass is slightly",
"that the glass may change shape slightly as it is heated? If it",
"side and \"raised\" in the center on the other side. I am wondering",
"the glass surface is. It appears the glass is slightly \"dished\" in the",
"it be put with the dish side up or down? Logic would say",
"get hotter since it is against the heater while the top is slightly",
"the dish side up or down? Logic would say that if it does",
"the glass may change shape slightly as it is heated? If it does",
"appears the glass is slightly \"dished\" in the center from one side and",
"is heated? If it does change shape, should it be put with the",
"shape slightly as it is heated? If it does change shape, should it",
"a sign of a defective glass, or if it is likely that the",
"be put with the dish side up or down? Logic would say that",
"purchased a glass bed to use with my still-in-transit Ender 3. Since the",
"on the other side. I am wondering if this is a sign of",
"should it be put with the dish side up or down? Logic would",
"shape, should it be put with the dish side up or down? Logic",
"and used a flat edge ruler to see how flat the glass surface",
"bottom may expand more \"pulling\" the center down? I guess the bottom line",
"3. Since the bed came in before the printer, I pulled it out",
"is. It appears the glass is slightly \"dished\" in the center from one",
"change shape, should it be put with the dish side up or down?",
"top is slightly cooler, so in theory the bottom may expand more \"pulling\"",
"put with the dish side up or down? Logic would say that if",
"I am wondering if this is a sign of a defective glass, or",
"flat edge ruler to see how flat the glass surface is. It appears",
"if it does change shape, the bottom would probably get hotter since it",
"I send the glass back as defective or wait until the printer arrives",
"the center on the other side. I am wondering if this is a",
"shape, the bottom would probably get hotter since it is against the heater",
"in the center from one side and \"raised\" in the center on the",
"is, should I send the glass back as defective or wait until the",
"the printer, I pulled it out and used a flat edge ruler to",
"bed came in before the printer, I pulled it out and used a",
"it out and used a flat edge ruler to see how flat the",
"is a sign of a defective glass, or if it is likely that",
"slightly as it is heated? If it does change shape, should it be",
"expand more \"pulling\" the center down? I guess the bottom line is, should",
"ruler to see how flat the glass surface is. It appears the glass",
"from one side and \"raised\" in the center on the other side. I",
"down? Logic would say that if it does change shape, the bottom would",
"the top is slightly cooler, so in theory the bottom may expand more",
"\"raised\" in the center on the other side. I am wondering if this",
"since it is against the heater while the top is slightly cooler, so",
"If it does change shape, should it be put with the dish side",
"the center down? I guess the bottom line is, should I send the",
"bed to use with my still-in-transit Ender 3. Since the bed came in",
"center on the other side. I am wondering if this is a sign",
"or wait until the printer arrives and see what happens when I heat",
"wondering if this is a sign of a defective glass, or if it",
"I purchased a glass bed to use with my still-in-transit Ender 3. Since",
"the bottom line is, should I send the glass back as defective or",
"surface is. It appears the glass is slightly \"dished\" in the center from",
"and \"raised\" in the center on the other side. I am wondering if",
"of a defective glass, or if it is likely that the glass may",
"I guess the bottom line is, should I send the glass back as",
"defective glass, or if it is likely that the glass may change shape",
"bottom would probably get hotter since it is against the heater while the",
"in before the printer, I pulled it out and used a flat edge",
"other side. I am wondering if this is a sign of a defective",
"Logic would say that if it does change shape, the bottom would probably",
"slightly cooler, so in theory the bottom may expand more \"pulling\" the center",
"against the heater while the top is slightly cooler, so in theory the",
"down? I guess the bottom line is, should I send the glass back",
"may change shape slightly as it is heated? If it does change shape,",
"with my still-in-transit Ender 3. Since the bed came in before the printer,",
"line is, should I send the glass back as defective or wait until",
"it is likely that the glass may change shape slightly as it is",
"how flat the glass surface is. It appears the glass is slightly \"dished\"",
"sign of a defective glass, or if it is likely that the glass",
"It appears the glass is slightly \"dished\" in the center from one side",
"cooler, so in theory the bottom may expand more \"pulling\" the center down?",
"the bottom may expand more \"pulling\" the center down? I guess the bottom",
"still-in-transit Ender 3. Since the bed came in before the printer, I pulled",
"is likely that the glass may change shape slightly as it is heated?",
"\"dished\" in the center from one side and \"raised\" in the center on",
"it is against the heater while the top is slightly cooler, so in",
"does change shape, the bottom would probably get hotter since it is against",
"more \"pulling\" the center down? I guess the bottom line is, should I",
"a glass bed to use with my still-in-transit Ender 3. Since the bed",
"heater while the top is slightly cooler, so in theory the bottom may",
"may expand more \"pulling\" the center down? I guess the bottom line is,",
"the bottom would probably get hotter since it is against the heater while",
"so in theory the bottom may expand more \"pulling\" the center down? I",
"my still-in-transit Ender 3. Since the bed came in before the printer, I",
"in theory the bottom may expand more \"pulling\" the center down? I guess",
"change shape, the bottom would probably get hotter since it is against the",
"send the glass back as defective or wait until the printer arrives and",
"one side and \"raised\" in the center on the other side. I am",
"it does change shape, should it be put with the dish side up",
"Ender 3. Since the bed came in before the printer, I pulled it",
"center down? I guess the bottom line is, should I send the glass",
"should I send the glass back as defective or wait until the printer",
"pulled it out and used a flat edge ruler to see how flat",
"it does change shape, the bottom would probably get hotter since it is",
"Since the bed came in before the printer, I pulled it out and",
"is against the heater while the top is slightly cooler, so in theory",
"edge ruler to see how flat the glass surface is. It appears the",
"change shape slightly as it is heated? If it does change shape, should",
"hotter since it is against the heater while the top is slightly cooler,",
"say that if it does change shape, the bottom would probably get hotter",
"the heater while the top is slightly cooler, so in theory the bottom",
"glass surface is. It appears the glass is slightly \"dished\" in the center",
"glass, or if it is likely that the glass may change shape slightly",
"\"pulling\" the center down? I guess the bottom line is, should I send",
"is slightly \"dished\" in the center from one side and \"raised\" in the",
"is slightly cooler, so in theory the bottom may expand more \"pulling\" the",
"the glass back as defective or wait until the printer arrives and see",
"used a flat edge ruler to see how flat the glass surface is.",
"theory the bottom may expand more \"pulling\" the center down? I guess the",
"or if it is likely that the glass may change shape slightly as",
"slightly \"dished\" in the center from one side and \"raised\" in the center",
"glass may change shape slightly as it is heated? If it does change",
"defective or wait until the printer arrives and see what happens when I",
"to see how flat the glass surface is. It appears the glass is",
"the center from one side and \"raised\" in the center on the other",
"side up or down? Logic would say that if it does change shape,",
"out and used a flat edge ruler to see how flat the glass",
"the glass is slightly \"dished\" in the center from one side and \"raised\"",
"before the printer, I pulled it out and used a flat edge ruler",
"the other side. I am wondering if this is a sign of a",
"heated? If it does change shape, should it be put with the dish",
"center from one side and \"raised\" in the center on the other side.",
"this is a sign of a defective glass, or if it is likely",
"it is heated? If it does change shape, should it be put with",
"a flat edge ruler to see how flat the glass surface is. It",
"glass back as defective or wait until the printer arrives and see what",
"glass is slightly \"dished\" in the center from one side and \"raised\" in",
"guess the bottom line is, should I send the glass back as defective",
"a defective glass, or if it is likely that the glass may change",
"glass bed to use with my still-in-transit Ender 3. Since the bed came",
"came in before the printer, I pulled it out and used a flat",
"until the printer arrives and see what happens when I heat it up?",
"would say that if it does change shape, the bottom would probably get"
] |
[
"say the **outer** edge along the top of the box is 50 mm",
"tightly you want to fit, though I expect in cases where a tight",
"Let's say I'm modeling a simple box with a lid. Just as an",
"a lid for this box to surround the top with an **inner** edge",
"**inner** edge size of also exactly 50 mm x 50 mm ...but this",
"for figuring this, or do the rough layers make things seem tighter than",
"easy on/off. An *exact* fit seems like it's asking for trouble. * How",
"thing? * Is it related to nozzle size? * I suppose it also",
"exactly 50 mm x 50 mm ...but this seems like a bad idea.",
"an example, we'll say the **outer** edge along the top of the box",
"mm x 50 mm ...but this seems like a bad idea. Surely I'll",
"a lid. Just as an example, we'll say the **outer** edge along the",
"modeling software, it's easy to build a lid for this box to surround",
"box with a lid. Just as an example, we'll say the **outer** edge",
"box is 50 mm x 50 mm. With 3D modeling software, it's easy",
"suppose it also matters how tightly you want to fit, though I expect",
"mm ...but this seems like a bad idea. Surely I'll want some kind",
"as an example, we'll say the **outer** edge along the top of the",
"I expect in cases where a tight fit matters some kind of snap",
"layer sizes useful for figuring this, or do the rough layers make things",
"the box is 50 mm x 50 mm. With 3D modeling software, it's",
"mm. With 3D modeling software, it's easy to build a lid for this",
"draft prints with larger layer sizes useful for figuring this, or do the",
"you want to fit, though I expect in cases where a tight fit",
"An *exact* fit seems like it's asking for trouble. * How much gap",
"**outer** edge along the top of the box is 50 mm x 50",
"we'll say the **outer** edge along the top of the box is 50",
"some kind of of gap, to ensure an easy on/off. An *exact* fit",
"useful for figuring this, or do the rough layers make things seem tighter",
"kind of thing? * Is it related to nozzle size? * I suppose",
"*exact* fit seems like it's asking for trouble. * How much gap do",
"top of the box is 50 mm x 50 mm. With 3D modeling",
"with larger layer sizes useful for figuring this, or do the rough layers",
"Are draft prints with larger layer sizes useful for figuring this, or do",
"fit seems like it's asking for trouble. * How much gap do we",
"I suppose it also matters how tightly you want to fit, though I",
"the **outer** edge along the top of the box is 50 mm x",
"* How much gap do we leave for this kind of thing? *",
"the rough layers make things seem tighter than they'll be in a final",
"edge size of also exactly 50 mm x 50 mm ...but this seems",
"bad idea. Surely I'll want some kind of of gap, to ensure an",
"3D modeling software, it's easy to build a lid for this box to",
"With 3D modeling software, it's easy to build a lid for this box",
"to ensure an easy on/off. An *exact* fit seems like it's asking for",
"gap do we leave for this kind of thing? * Is it related",
"* Is it related to nozzle size? * I suppose it also matters",
"easy to build a lid for this box to surround the top with",
"software, it's easy to build a lid for this box to surround the",
"along the top of the box is 50 mm x 50 mm. With",
"...but this seems like a bad idea. Surely I'll want some kind of",
"with an **inner** edge size of also exactly 50 mm x 50 mm",
"50 mm ...but this seems like a bad idea. Surely I'll want some",
"of the box is 50 mm x 50 mm. With 3D modeling software,",
"I'll want some kind of of gap, to ensure an easy on/off. An",
"Is it related to nozzle size? * I suppose it also matters how",
"or do the rough layers make things seem tighter than they'll be in",
"to fit, though I expect in cases where a tight fit matters some",
"do the rough layers make things seem tighter than they'll be in a",
"for this box to surround the top with an **inner** edge size of",
"* Are draft prints with larger layer sizes useful for figuring this, or",
"much gap do we leave for this kind of thing? * Is it",
"the top with an **inner** edge size of also exactly 50 mm x",
"Surely I'll want some kind of of gap, to ensure an easy on/off.",
"cases where a tight fit matters some kind of snap or clip would",
"lid for this box to surround the top with an **inner** edge size",
"or clip would be used. * Are draft prints with larger layer sizes",
"a bad idea. Surely I'll want some kind of of gap, to ensure",
"like a bad idea. Surely I'll want some kind of of gap, to",
"larger layer sizes useful for figuring this, or do the rough layers make",
"we leave for this kind of thing? * Is it related to nozzle",
"rough layers make things seem tighter than they'll be in a final print?",
"fit matters some kind of snap or clip would be used. * Are",
"for trouble. * How much gap do we leave for this kind of",
"to surround the top with an **inner** edge size of also exactly 50",
"seems like it's asking for trouble. * How much gap do we leave",
"with a lid. Just as an example, we'll say the **outer** edge along",
"want to fit, though I expect in cases where a tight fit matters",
"be used. * Are draft prints with larger layer sizes useful for figuring",
"a simple box with a lid. Just as an example, we'll say the",
"size? * I suppose it also matters how tightly you want to fit,",
"mm x 50 mm. With 3D modeling software, it's easy to build a",
"an easy on/off. An *exact* fit seems like it's asking for trouble. *",
"nozzle size? * I suppose it also matters how tightly you want to",
"gap, to ensure an easy on/off. An *exact* fit seems like it's asking",
"50 mm x 50 mm. With 3D modeling software, it's easy to build",
"* I suppose it also matters how tightly you want to fit, though",
"this, or do the rough layers make things seem tighter than they'll be",
"it related to nozzle size? * I suppose it also matters how tightly",
"seems like a bad idea. Surely I'll want some kind of of gap,",
"top with an **inner** edge size of also exactly 50 mm x 50",
"figuring this, or do the rough layers make things seem tighter than they'll",
"related to nozzle size? * I suppose it also matters how tightly you",
"leave for this kind of thing? * Is it related to nozzle size?",
"some kind of snap or clip would be used. * Are draft prints",
"of of gap, to ensure an easy on/off. An *exact* fit seems like",
"snap or clip would be used. * Are draft prints with larger layer",
"of thing? * Is it related to nozzle size? * I suppose it",
"kind of snap or clip would be used. * Are draft prints with",
"of gap, to ensure an easy on/off. An *exact* fit seems like it's",
"50 mm. With 3D modeling software, it's easy to build a lid for",
"trouble. * How much gap do we leave for this kind of thing?",
"this kind of thing? * Is it related to nozzle size? * I",
"where a tight fit matters some kind of snap or clip would be",
"it also matters how tightly you want to fit, though I expect in",
"x 50 mm. With 3D modeling software, it's easy to build a lid",
"expect in cases where a tight fit matters some kind of snap or",
"kind of of gap, to ensure an easy on/off. An *exact* fit seems",
"would be used. * Are draft prints with larger layer sizes useful for",
"build a lid for this box to surround the top with an **inner**",
"How much gap do we leave for this kind of thing? * Is",
"this seems like a bad idea. Surely I'll want some kind of of",
"fit, though I expect in cases where a tight fit matters some kind",
"for this kind of thing? * Is it related to nozzle size? *",
"of snap or clip would be used. * Are draft prints with larger",
"prints with larger layer sizes useful for figuring this, or do the rough",
"lid. Just as an example, we'll say the **outer** edge along the top",
"how tightly you want to fit, though I expect in cases where a",
"I'm modeling a simple box with a lid. Just as an example, we'll",
"size of also exactly 50 mm x 50 mm ...but this seems like",
"sizes useful for figuring this, or do the rough layers make things seem",
"simple box with a lid. Just as an example, we'll say the **outer**",
"50 mm x 50 mm ...but this seems like a bad idea. Surely",
"ensure an easy on/off. An *exact* fit seems like it's asking for trouble.",
"matters some kind of snap or clip would be used. * Are draft",
"to build a lid for this box to surround the top with an",
"modeling a simple box with a lid. Just as an example, we'll say",
"do we leave for this kind of thing? * Is it related to",
"example, we'll say the **outer** edge along the top of the box is",
"clip would be used. * Are draft prints with larger layer sizes useful",
"surround the top with an **inner** edge size of also exactly 50 mm",
"Just as an example, we'll say the **outer** edge along the top of",
"edge along the top of the box is 50 mm x 50 mm.",
"x 50 mm ...but this seems like a bad idea. Surely I'll want",
"want some kind of of gap, to ensure an easy on/off. An *exact*",
"in cases where a tight fit matters some kind of snap or clip",
"box to surround the top with an **inner** edge size of also exactly",
"of also exactly 50 mm x 50 mm ...but this seems like a",
"idea. Surely I'll want some kind of of gap, to ensure an easy",
"matters how tightly you want to fit, though I expect in cases where",
"this box to surround the top with an **inner** edge size of also",
"it's asking for trouble. * How much gap do we leave for this",
"say I'm modeling a simple box with a lid. Just as an example,",
"used. * Are draft prints with larger layer sizes useful for figuring this,",
"the top of the box is 50 mm x 50 mm. With 3D",
"it's easy to build a lid for this box to surround the top",
"a tight fit matters some kind of snap or clip would be used.",
"an **inner** edge size of also exactly 50 mm x 50 mm ...but",
"tight fit matters some kind of snap or clip would be used. *",
"asking for trouble. * How much gap do we leave for this kind",
"though I expect in cases where a tight fit matters some kind of",
"on/off. An *exact* fit seems like it's asking for trouble. * How much",
"to nozzle size? * I suppose it also matters how tightly you want",
"is 50 mm x 50 mm. With 3D modeling software, it's easy to",
"like it's asking for trouble. * How much gap do we leave for",
"also exactly 50 mm x 50 mm ...but this seems like a bad",
"also matters how tightly you want to fit, though I expect in cases"
] |
[
"have heard people talking about masterspool, when talking about 3D printing filament. *",
"filament. * What *exactly* is master spool? * Where did the idea come",
"about masterspool, when talking about 3D printing filament. * What *exactly* is master",
"distributors/manufacturers have adopted this already, and is it gaining traction? * Is this",
"is it gaining traction? * Is this something that I should get excited",
"spool? * Where did the idea come from and when? * Is it",
"the idea come from and when? * Is it being widely adopted? Or",
"being widely adopted? Or to be specific, how many distributors/manufacturers have adopted this",
"is master spool? * Where did the idea come from and when? *",
"widely adopted? Or to be specific, how many distributors/manufacturers have adopted this already,",
"* What *exactly* is master spool? * Where did the idea come from",
"idea come from and when? * Is it being widely adopted? Or to",
"did the idea come from and when? * Is it being widely adopted?",
"how many distributors/manufacturers have adopted this already, and is it gaining traction? *",
"* Where did the idea come from and when? * Is it being",
"when? * Is it being widely adopted? Or to be specific, how many",
"talking about masterspool, when talking about 3D printing filament. * What *exactly* is",
"it being widely adopted? Or to be specific, how many distributors/manufacturers have adopted",
"have adopted this already, and is it gaining traction? * Is this something",
"adopted this already, and is it gaining traction? * Is this something that",
"Is this something that I should get excited by? * If so, why",
"master spool? * Where did the idea come from and when? * Is",
"* Is it being widely adopted? Or to be specific, how many distributors/manufacturers",
"this already, and is it gaining traction? * Is this something that I",
"about 3D printing filament. * What *exactly* is master spool? * Where did",
"traction? * Is this something that I should get excited by? * If",
"What *exactly* is master spool? * Where did the idea come from and",
"printing filament. * What *exactly* is master spool? * Where did the idea",
"this something that I should get excited by? * If so, why is",
"adopted? Or to be specific, how many distributors/manufacturers have adopted this already, and",
"many distributors/manufacturers have adopted this already, and is it gaining traction? * Is",
"get excited by? * If so, why is it such a good idea?",
"and is it gaining traction? * Is this something that I should get",
"and when? * Is it being widely adopted? Or to be specific, how",
"Where did the idea come from and when? * Is it being widely",
"specific, how many distributors/manufacturers have adopted this already, and is it gaining traction?",
"should get excited by? * If so, why is it such a good",
"talking about 3D printing filament. * What *exactly* is master spool? * Where",
"come from and when? * Is it being widely adopted? Or to be",
"* Is this something that I should get excited by? * If so,",
"that I should get excited by? * If so, why is it such",
"heard people talking about masterspool, when talking about 3D printing filament. * What",
"Is it being widely adopted? Or to be specific, how many distributors/manufacturers have",
"be specific, how many distributors/manufacturers have adopted this already, and is it gaining",
"from and when? * Is it being widely adopted? Or to be specific,",
"Recently, I have heard people talking about masterspool, when talking about 3D printing",
"it gaining traction? * Is this something that I should get excited by?",
"already, and is it gaining traction? * Is this something that I should",
"I have heard people talking about masterspool, when talking about 3D printing filament.",
"masterspool, when talking about 3D printing filament. * What *exactly* is master spool?",
"people talking about masterspool, when talking about 3D printing filament. * What *exactly*",
"when talking about 3D printing filament. * What *exactly* is master spool? *",
"I should get excited by? * If so, why is it such a",
"3D printing filament. * What *exactly* is master spool? * Where did the",
"*exactly* is master spool? * Where did the idea come from and when?",
"gaining traction? * Is this something that I should get excited by? *",
"Or to be specific, how many distributors/manufacturers have adopted this already, and is",
"to be specific, how many distributors/manufacturers have adopted this already, and is it",
"something that I should get excited by? * If so, why is it"
] |
[
"What's a good rule of thumb for how thick to make the outside?",
"for how thick to make the outside? I'm looking for something along the",
"to make the outside? I'm looking for something along the lines of millimeters",
"something along the lines of millimeters thick per square inch of area. I'm",
"other object with no infill. What's a good rule of thumb for how",
"of area. I'm thinking about PLA right now, but answers for ABS and",
"lines of millimeters thick per square inch of area. I'm thinking about PLA",
"infill. What's a good rule of thumb for how thick to make the",
"outside? I'm looking for something along the lines of millimeters thick per square",
"PLA right now, but answers for ABS and other materials are welcome, too.",
"the outside? I'm looking for something along the lines of millimeters thick per",
"a container or some other object with no infill. What's a good rule",
"Let's say you're printing a container or some other object with no infill.",
"along the lines of millimeters thick per square inch of area. I'm thinking",
"you're printing a container or some other object with no infill. What's a",
"thumb for how thick to make the outside? I'm looking for something along",
"millimeters thick per square inch of area. I'm thinking about PLA right now,",
"no infill. What's a good rule of thumb for how thick to make",
"per square inch of area. I'm thinking about PLA right now, but answers",
"about PLA right now, but answers for ABS and other materials are welcome,",
"the lines of millimeters thick per square inch of area. I'm thinking about",
"with no infill. What's a good rule of thumb for how thick to",
"a good rule of thumb for how thick to make the outside? I'm",
"how thick to make the outside? I'm looking for something along the lines",
"looking for something along the lines of millimeters thick per square inch of",
"for something along the lines of millimeters thick per square inch of area.",
"container or some other object with no infill. What's a good rule of",
"some other object with no infill. What's a good rule of thumb for",
"I'm thinking about PLA right now, but answers for ABS and other materials",
"object with no infill. What's a good rule of thumb for how thick",
"area. I'm thinking about PLA right now, but answers for ABS and other",
"square inch of area. I'm thinking about PLA right now, but answers for",
"say you're printing a container or some other object with no infill. What's",
"thick to make the outside? I'm looking for something along the lines of",
"good rule of thumb for how thick to make the outside? I'm looking",
"I'm looking for something along the lines of millimeters thick per square inch",
"printing a container or some other object with no infill. What's a good",
"of thumb for how thick to make the outside? I'm looking for something",
"of millimeters thick per square inch of area. I'm thinking about PLA right",
"or some other object with no infill. What's a good rule of thumb",
"inch of area. I'm thinking about PLA right now, but answers for ABS",
"make the outside? I'm looking for something along the lines of millimeters thick",
"thick per square inch of area. I'm thinking about PLA right now, but",
"thinking about PLA right now, but answers for ABS and other materials are",
"rule of thumb for how thick to make the outside? I'm looking for"
] |
[
"know about the paper trick for leveling the print bed, but my understanding",
"thus far, the 0.1 mm seems typical for other printers, too. I want",
"slicing software, but most prints on this machine will be .1mm. In my",
"but most prints on this machine will be .1mm. In my (admittedly limited)",
"mm typical layer thickness. Of course I can choose some different sizes in",
"just how thick this is. I know about the paper trick for leveling",
"far, the 0.1 mm seems typical for other printers, too. I want to",
"choose some different sizes in Cura or other slicing software, but most prints",
"software, but most prints on this machine will be .1mm. In my (admittedly",
"the paper trick for leveling the print bed, but my understanding is the",
"Cura or other slicing software, but most prints on this machine will be",
"Of course I can choose some different sizes in Cura or other slicing",
"good example for the typical layer. Is there a similar item with close",
"trick for leveling the print bed, but my understanding is the first layer",
"meaning it's less than 0.1 mm and so paper isn't a good example",
"too. I want to get a sense of just how thick this is.",
"for the typical layer. Is there a similar item with close to 0.1",
"typical layer thickness. Of course I can choose some different sizes in Cura",
"machine will be .1mm. In my (admittedly limited) experience thus far, the 0.1",
"prints on this machine will be .1mm. In my (admittedly limited) experience thus",
"can choose some different sizes in Cura or other slicing software, but most",
"of just how thick this is. I know about the paper trick for",
"a similar item with close to 0.1 mm thickness I can use to",
"bed, but my understanding is the first layer pushes into the bed a",
"sense of just how thick this is. I know about the paper trick",
"In my (admittedly limited) experience thus far, the 0.1 mm seems typical for",
"the first layer pushes into the bed a little, meaning it's less than",
"into the bed a little, meaning it's less than 0.1 mm and so",
"similar item with close to 0.1 mm thickness I can use to visualize",
"get a sense of just how thick this is. I know about the",
"printers, too. I want to get a sense of just how thick this",
"(admittedly limited) experience thus far, the 0.1 mm seems typical for other printers,",
"the bed a little, meaning it's less than 0.1 mm and so paper",
"course I can choose some different sizes in Cura or other slicing software,",
"the typical layer. Is there a similar item with close to 0.1 mm",
"leveling the print bed, but my understanding is the first layer pushes into",
"how thick this is. I know about the paper trick for leveling the",
"for other printers, too. I want to get a sense of just how",
"my understanding is the first layer pushes into the bed a little, meaning",
"so paper isn't a good example for the typical layer. Is there a",
"paper trick for leveling the print bed, but my understanding is the first",
"typical for other printers, too. I want to get a sense of just",
"little, meaning it's less than 0.1 mm and so paper isn't a good",
"I know about the paper trick for leveling the print bed, but my",
"a sense of just how thick this is. I know about the paper",
"other slicing software, but most prints on this machine will be .1mm. In",
"this is. I know about the paper trick for leveling the print bed,",
"thickness. Of course I can choose some different sizes in Cura or other",
"limited) experience thus far, the 0.1 mm seems typical for other printers, too.",
"isn't a good example for the typical layer. Is there a similar item",
"0.1 mm typical layer thickness. Of course I can choose some different sizes",
"or other slicing software, but most prints on this machine will be .1mm.",
"be .1mm. In my (admittedly limited) experience thus far, the 0.1 mm seems",
"bed a little, meaning it's less than 0.1 mm and so paper isn't",
"about the paper trick for leveling the print bed, but my understanding is",
"in Cura or other slicing software, but most prints on this machine will",
"item with close to 0.1 mm thickness I can use to visualize this?",
"my (admittedly limited) experience thus far, the 0.1 mm seems typical for other",
"is. I know about the paper trick for leveling the print bed, but",
"some different sizes in Cura or other slicing software, but most prints on",
"experience thus far, the 0.1 mm seems typical for other printers, too. I",
"layer thickness. Of course I can choose some different sizes in Cura or",
"and so paper isn't a good example for the typical layer. Is there",
"this machine will be .1mm. In my (admittedly limited) experience thus far, the",
"than 0.1 mm and so paper isn't a good example for the typical",
"with a 0.1 mm typical layer thickness. Of course I can choose some",
"paper isn't a good example for the typical layer. Is there a similar",
"example for the typical layer. Is there a similar item with close to",
"first layer pushes into the bed a little, meaning it's less than 0.1",
"typical layer. Is there a similar item with close to 0.1 mm thickness",
"print bed, but my understanding is the first layer pushes into the bed",
"most prints on this machine will be .1mm. In my (admittedly limited) experience",
"I have a printer with a 0.1 mm typical layer thickness. Of course",
"a 0.1 mm typical layer thickness. Of course I can choose some different",
"the print bed, but my understanding is the first layer pushes into the",
"is the first layer pushes into the bed a little, meaning it's less",
"have a printer with a 0.1 mm typical layer thickness. Of course I",
"a good example for the typical layer. Is there a similar item with",
"thick this is. I know about the paper trick for leveling the print",
"the 0.1 mm seems typical for other printers, too. I want to get",
"want to get a sense of just how thick this is. I know",
"I can choose some different sizes in Cura or other slicing software, but",
"0.1 mm seems typical for other printers, too. I want to get a",
"it's less than 0.1 mm and so paper isn't a good example for",
"to get a sense of just how thick this is. I know about",
"seems typical for other printers, too. I want to get a sense of",
"for leveling the print bed, but my understanding is the first layer pushes",
"mm and so paper isn't a good example for the typical layer. Is",
"on this machine will be .1mm. In my (admittedly limited) experience thus far,",
"less than 0.1 mm and so paper isn't a good example for the",
"a printer with a 0.1 mm typical layer thickness. Of course I can",
"other printers, too. I want to get a sense of just how thick",
"pushes into the bed a little, meaning it's less than 0.1 mm and",
"layer pushes into the bed a little, meaning it's less than 0.1 mm",
".1mm. In my (admittedly limited) experience thus far, the 0.1 mm seems typical",
"different sizes in Cura or other slicing software, but most prints on this",
"I want to get a sense of just how thick this is. I",
"understanding is the first layer pushes into the bed a little, meaning it's",
"sizes in Cura or other slicing software, but most prints on this machine",
"a little, meaning it's less than 0.1 mm and so paper isn't a",
"there a similar item with close to 0.1 mm thickness I can use",
"mm seems typical for other printers, too. I want to get a sense",
"Is there a similar item with close to 0.1 mm thickness I can",
"will be .1mm. In my (admittedly limited) experience thus far, the 0.1 mm",
"but my understanding is the first layer pushes into the bed a little,",
"layer. Is there a similar item with close to 0.1 mm thickness I",
"0.1 mm and so paper isn't a good example for the typical layer.",
"printer with a 0.1 mm typical layer thickness. Of course I can choose"
] |